NEWTEC-PROTECTEDTSOVERIPIN-MIB DEFINITIONS ::= BEGIN IMPORTS IpAddress, Unsigned32, Counter32, Integer32, MODULE-IDENTITY, OBJECT-IDENTITY, OBJECT-TYPE FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF NtcAlarmState, NtcEnable, NtcNetworkAddress FROM NEWTEC-TC-MIB DisplayString FROM SNMPv2-TC ntcFunction FROM NEWTEC-MAIN-MIB; -- -- Module Identification -- ntcProtectedTsOverIpIn MODULE-IDENTITY LAST-UPDATED "201804041000Z" ORGANIZATION "Newtec Cy" CONTACT-INFO "Newtec Cy Postal: Newtec Cy Laarstraat 5 B-9100 Sint-Niklaas Belgium Tel: +32 3 780 65 00 Fax: +32 3 780 65 49 Web: www.newtec.be E-mail: techsupport@newtec.be" DESCRIPTION "Newtec modular Protected TSoIP input MIB containing definitions for Protected TS over IP input functionality." REVISION "201804041000Z" DESCRIPTION "NullPacketrate threshold vardefs added" REVISION "201707101200Z" DESCRIPTION "Descriptions updated with regex" REVISION "201602020700Z" DESCRIPTION "initial release" ::= { ntcFunction 9400 } -- -- Top-Level Structure -- -- ntcProtectedTsOverIpIn content ntcProtTsOIpInObjects OBJECT-IDENTITY STATUS current DESCRIPTION "Container holding ntcProtTsOIpInObjects definitions." ::= { ntcProtectedTsOverIpIn 1 } ntcProtTsOIpInConformance OBJECT-IDENTITY STATUS current DESCRIPTION "Conformance requirements." ::= { ntcProtectedTsOverIpIn 2 } -- ntcProtTsOIpInObjects content ntcProtTsOIpInMon OBJECT-IDENTITY STATUS current DESCRIPTION "Container holding ntcProtTsOIpInMon definitions." ::= { ntcProtTsOIpInObjects 4 } ntcProtTsOIpInAlarms OBJECT-IDENTITY STATUS current DESCRIPTION "Container holding ntcProtTsOIpInAlarms definitions." ::= { ntcProtTsOIpInObjects 5 } ntcProtTsOIpInAlarm OBJECT-IDENTITY STATUS current DESCRIPTION "Container holding ntcProtTsOIpInAlarm definitions." ::= { ntcProtTsOIpInObjects 6 } ntcProtTsOIpInNpRangeThr OBJECT-IDENTITY STATUS current DESCRIPTION "Container holding ntcProtTsOIpInNpRangeThr definitions." ::= { ntcProtTsOIpInObjects 7 } -- ntcProtTsOIpInConformance content ntcProtTsOIpInConfCompliance OBJECT-IDENTITY STATUS current DESCRIPTION "Device compliance statements." ::= { ntcProtTsOIpInConformance 1 } ntcProtTsOIpInConfGroup OBJECT-IDENTITY STATUS current DESCRIPTION "Groups used by device compliance statements." ::= { ntcProtTsOIpInConformance 2 } -- -- Managed Objects -- ntcProtTsOIpInEnable OBJECT-TYPE SYNTAX NtcEnable MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable TS (Transport Stream) over IP reception." DEFVAL { off } ::= { ntcProtTsOIpInObjects 1 } ntcProtTsOIpInProtInpSelection OBJECT-TYPE SYNTAX INTEGER { tsoip1(1), tsoip2(2), tsoip1or2(3), tsoip1before2(4), tsoip2before1(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "Configuration of the Protected TSoIP input interface." DEFVAL { tsoip1or2 } ::= { ntcProtTsOIpInObjects 2 } ntcProtTsOIpInConfTable OBJECT-TYPE SYNTAX SEQUENCE OF NtcProtTsOIpInConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configuration table" ::= { ntcProtTsOIpInObjects 3 } ntcProtTsOIpInConfEntry OBJECT-TYPE SYNTAX NtcProtTsOIpInConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row of the ntcProtTsOIpInConfTable." INDEX { ntcProtTsOIpInConfName } ::= { ntcProtTsOIpInConfTable 1 } NtcProtTsOIpInConfEntry ::= SEQUENCE { ntcProtTsOIpInConfName DisplayString, ntcProtTsOIpInInpSelection INTEGER, ntcProtTsOIpInTsEncapProtocol INTEGER, ntcProtTsOIpInIpAddressType INTEGER, ntcProtTsOIpInMulticastAddress IpAddress, ntcProtTsOIpInMulticastSourceA NtcNetworkAddress, ntcProtTsOIpInMulticastSourceB NtcNetworkAddress, ntcProtTsOIpInUdpPort Unsigned32, ntcProtTsOIpInTrafficProfile INTEGER, ntcProtTsOIpInInputRateType INTEGER, ntcProtTsOIpInAutoPcrDetection NtcEnable, ntcProtTsOIpInPcrPid Unsigned32, ntcProtTsOIpInMaxBufferDelay Unsigned32, ntcProtTsOIpInInputTsBitRate Unsigned32 } ntcProtTsOIpInConfName OBJECT-TYPE SYNTAX DisplayString (SIZE(1..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of the configuration" ::= { ntcProtTsOIpInConfEntry 1 } ntcProtTsOIpInInpSelection OBJECT-TYPE SYNTAX INTEGER { none(1), data1(2), data2(3), data(4), any(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "Select the input interface for the TS over IP functionality." DEFVAL { none } ::= { ntcProtTsOIpInConfEntry 2 } ntcProtTsOIpInTsEncapProtocol OBJECT-TYPE SYNTAX INTEGER { udp(0), rtp(1), rtpfec(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Encapsulation protocol used for the received TS over IP functionality (UDP, RTP and RTP with FEC)." DEFVAL { udp } ::= { ntcProtTsOIpInConfEntry 3 } ntcProtTsOIpInIpAddressType OBJECT-TYPE SYNTAX INTEGER { unicast(0), multicast(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Configuration of the IP address type for TS over IP reception. (unicast or multicast)" DEFVAL { unicast } ::= { ntcProtTsOIpInConfEntry 4 } ntcProtTsOIpInMulticastAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Define the multicast IP address used to receive the TS over IP data functionality. Regular expression : (?-mix:^\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}$)" DEFVAL { 'e0010001'h } ::= { ntcProtTsOIpInConfEntry 5 } ntcProtTsOIpInMulticastSourceA OBJECT-TYPE SYNTAX NtcNetworkAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Multicast source Address. Regular expression : (?-mix:^\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}$)" DEFVAL { "0.0.0.0" } ::= { ntcProtTsOIpInConfEntry 6 } ntcProtTsOIpInMulticastSourceB OBJECT-TYPE SYNTAX NtcNetworkAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Multicast source Address. Regular expression : (?-mix:^\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}$)" DEFVAL { "0.0.0.0" } ::= { ntcProtTsOIpInConfEntry 7 } ntcProtTsOIpInUdpPort OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure the UDP port on which the TS over IP stream is received." DEFVAL { 56789 } ::= { ntcProtTsOIpInConfEntry 8 } ntcProtTsOIpInTrafficProfile OBJECT-TYPE SYNTAX INTEGER { vbr(0), cbr(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Configure the TS input traffic profile for the TS stream (CBR=constant or VBR=variable bitrate)." DEFVAL { cbr } ::= { ntcProtTsOIpInConfEntry 9 } ntcProtTsOIpInInputRateType OBJECT-TYPE SYNTAX INTEGER { userdefined(0), pcr(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "When the operator selects 'User Defined', the actual input rate and the control loop type needs to be specified further. In the other case, PCR PID and control loop type is used." DEFVAL { pcr } ::= { ntcProtTsOIpInConfEntry 10 } ntcProtTsOIpInAutoPcrDetection OBJECT-TYPE SYNTAX NtcEnable MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable Auto PCR Detection." DEFVAL { on } ::= { ntcProtTsOIpInConfEntry 11 } ntcProtTsOIpInPcrPid OBJECT-TYPE SYNTAX Unsigned32 (0..8191) MAX-ACCESS read-write STATUS current DESCRIPTION "PCR PID." DEFVAL { 8191 } ::= { ntcProtTsOIpInConfEntry 12 } ntcProtTsOIpInMaxBufferDelay OBJECT-TYPE SYNTAX Unsigned32 UNITS "ms" MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum delay introduced by the device to compensate jitter introduced by the IP network. This is only relevant for CBR traffic." DEFVAL { 250 } ::= { ntcProtTsOIpInConfEntry 13 } ntcProtTsOIpInInputTsBitRate OBJECT-TYPE SYNTAX Unsigned32 UNITS "bps" MAX-ACCESS read-write STATUS current DESCRIPTION "TS input rate in bps used with a constant bitrate input traffic profile. Current devices support a range of 10 to 250000000 bps." DEFVAL { 1000000 } ::= { ntcProtTsOIpInConfEntry 14 } ntcProtTsOIpInCounterReset OBJECT-TYPE SYNTAX INTEGER { counting(0), reset(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Reset the TS over IP traffic and monitor counters." DEFVAL { counting } ::= { ntcProtTsOIpInMon 1 } ntcProtTsOIpInMInpSelTsBRate OBJECT-TYPE SYNTAX Unsigned32 UNITS "bps" MAX-ACCESS read-only STATUS current DESCRIPTION "Displays the measured TS over IP input TS bit rate in bps." ::= { ntcProtTsOIpInMon 2 } ntcProtTsOIpInSwitchCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counts the number of times the device switched to another TS input." ::= { ntcProtTsOIpInMon 3 } ntcProtTsOIpInActiveInput OBJECT-TYPE SYNTAX INTEGER { none(0), tsoip1(1), tsoip2(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Currently selected input by the protected port." ::= { ntcProtTsOIpInMon 4 } ntcProtTsOIpInMonTable OBJECT-TYPE SYNTAX SEQUENCE OF NtcProtTsOIpInMonEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Monitoring table" ::= { ntcProtTsOIpInMon 5 } ntcProtTsOIpInMonEntry OBJECT-TYPE SYNTAX NtcProtTsOIpInMonEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row of the ntcProtTsOIpInMonTable." INDEX { ntcProtTsOIpInMonName } ::= { ntcProtTsOIpInMonTable 1 } NtcProtTsOIpInMonEntry ::= SEQUENCE { ntcProtTsOIpInMonName DisplayString, ntcProtTsOIpInMonMeasInTsBitRate Unsigned32, ntcProtTsOIpInMonBufferDelay Unsigned32, ntcProtTsOIpInMonMinBufferFill Unsigned32, ntcProtTsOIpInMonMaxBufferFill Unsigned32, ntcProtTsOIpInMonSourceInfo DisplayString, ntcProtTsOIpInMonRtpFecScheme DisplayString, ntcProtTsOIpInMonTsInCount Counter32, ntcProtTsOIpInMonRtpInCount Counter32, ntcProtTsOIpInMonRtpColFecInCnt Counter32, ntcProtTsOIpInMonRtpRowFecInCnt Counter32, ntcProtTsOIpInMonTsOutCount Counter32, ntcProtTsOIpInMonTsDropCount Counter32, ntcProtTsOIpInMonTsOverflowCount Counter32, ntcProtTsOIpInMonRtpDropCount Counter32, ntcProtTsOIpInMonRtpFecDropCount Counter32, ntcProtTsOIpInMonRtpRepairCount Counter32, ntcProtTsOIpInActivePcrPid Unsigned32 } ntcProtTsOIpInMonName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of the output monitor" ::= { ntcProtTsOIpInMonEntry 1 } ntcProtTsOIpInMonMeasInTsBitRate OBJECT-TYPE SYNTAX Unsigned32 UNITS "bps" MAX-ACCESS read-only STATUS current DESCRIPTION "Displays the measured TS over IP input TS bit rate in bps." ::= { ntcProtTsOIpInMonEntry 2 } ntcProtTsOIpInMonBufferDelay OBJECT-TYPE SYNTAX Unsigned32 UNITS "ms" MAX-ACCESS read-only STATUS current DESCRIPTION "The delay introduced by the device to compensate the jitter introduced by the IP network. This is only relevant for CBR traffic." ::= { ntcProtTsOIpInMonEntry 3 } ntcProtTsOIpInMonMinBufferFill OBJECT-TYPE SYNTAX Unsigned32 UNITS "ms" MAX-ACCESS read-only STATUS current DESCRIPTION "The measured minimum buffer delay in the buffer which compensate the jitter of the IP network. This is only relevant for CBR traffic." ::= { ntcProtTsOIpInMonEntry 4 } ntcProtTsOIpInMonMaxBufferFill OBJECT-TYPE SYNTAX Unsigned32 UNITS "ms" MAX-ACCESS read-only STATUS current DESCRIPTION "The measured maximum buffer delay in the buffer which compensate the jitter of the IP network. This is only relevant for CBR traffic." ::= { ntcProtTsOIpInMonEntry 5 } ntcProtTsOIpInMonSourceInfo OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "Displays the IP address (and UDP port) of the source that is generating the TS over IP traffic." ::= { ntcProtTsOIpInMonEntry 6 } ntcProtTsOIpInMonRtpFecScheme OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "Displays the type of Rtp FEC Scheme currently used (if any)." ::= { ntcProtTsOIpInMonEntry 7 } ntcProtTsOIpInMonTsInCount OBJECT-TYPE SYNTAX Counter32 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "Displays the Number of received TS packets in UDP mode." ::= { ntcProtTsOIpInMonEntry 8 } ntcProtTsOIpInMonRtpInCount OBJECT-TYPE SYNTAX Counter32 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "Displays the number of received RTP packets. (only applicable when RTP is used)" ::= { ntcProtTsOIpInMonEntry 9 } ntcProtTsOIpInMonRtpColFecInCnt OBJECT-TYPE SYNTAX Counter32 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "Displays the number of received (input) RTP column FEC packets." ::= { ntcProtTsOIpInMonEntry 10 } ntcProtTsOIpInMonRtpRowFecInCnt OBJECT-TYPE SYNTAX Counter32 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "Displays the number of received RTP row FEC packets. (Only applicable when RTP with FEC is used.)" ::= { ntcProtTsOIpInMonEntry 11 } ntcProtTsOIpInMonTsOutCount OBJECT-TYPE SYNTAX Counter32 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "Displays the number of valid TS packets leaving the TS over IP input processing." ::= { ntcProtTsOIpInMonEntry 12 } ntcProtTsOIpInMonTsDropCount OBJECT-TYPE SYNTAX Counter32 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "Number of dropped TS packets. (When RTP is used the number of dropped TS packets in the RTP frame is counted.)" ::= { ntcProtTsOIpInMonEntry 13 } ntcProtTsOIpInMonTsOverflowCount OBJECT-TYPE SYNTAX Counter32 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "Displays the number of TS packets that are dropped because of an overflow situation." ::= { ntcProtTsOIpInMonEntry 14 } ntcProtTsOIpInMonRtpDropCount OBJECT-TYPE SYNTAX Counter32 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "Displays the number of dropped RTP packets. (This is only applicable when RTP is used.)" ::= { ntcProtTsOIpInMonEntry 15 } ntcProtTsOIpInMonRtpFecDropCount OBJECT-TYPE SYNTAX Counter32 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "Displays the number of dropped uncorrectable packets. (This is only applicable when RTP-FEC is used.)" ::= { ntcProtTsOIpInMonEntry 16 } ntcProtTsOIpInMonRtpRepairCount OBJECT-TYPE SYNTAX Counter32 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "Displays the number of repaired RTP packets by using the received FEC information. (This is only applicable for RTP with FEC)" ::= { ntcProtTsOIpInMonEntry 17 } ntcProtTsOIpInActivePcrPid OBJECT-TYPE SYNTAX Unsigned32 (0..8190) MAX-ACCESS read-only STATUS current DESCRIPTION "Active PCR PID." ::= { ntcProtTsOIpInMonEntry 18 } ntcProtTsOIpInAlarmStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF NtcProtTsOIpInAlarmStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Alarm status table" ::= { ntcProtTsOIpInAlarms 1 } ntcProtTsOIpInAlarmStatusEntry OBJECT-TYPE SYNTAX NtcProtTsOIpInAlarmStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row of the ntcProtTsOIpInAlarmStatusTable." INDEX { ntcProtTsOIpInAlarmStatusName } ::= { ntcProtTsOIpInAlarmStatusTable 1 } NtcProtTsOIpInAlarmStatusEntry ::= SEQUENCE { ntcProtTsOIpInAlarmStatusName DisplayString, ntcProtTsOIpInNoInputData NtcAlarmState, ntcProtTsOIpInBufferUnderflow NtcAlarmState, ntcProtTsOIpInBufferOverflow NtcAlarmState, ntcProtTsOIpInRtpNoSync NtcAlarmState } ntcProtTsOIpInAlarmStatusName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of the alarm monitor" ::= { ntcProtTsOIpInAlarmStatusEntry 1 } ntcProtTsOIpInNoInputData OBJECT-TYPE SYNTAX NtcAlarmState MAX-ACCESS read-only STATUS current DESCRIPTION "This alarm is raised when no input data is received for at least one of the the redundant TS over IP inputs. This variable indicates the current status of the alarm." ::= { ntcProtTsOIpInAlarmStatusEntry 2 } ntcProtTsOIpInBufferUnderflow OBJECT-TYPE SYNTAX NtcAlarmState MAX-ACCESS read-only STATUS current DESCRIPTION "This alarm is raised when the input data buffer is below the minimum value. This variable indicates the current status of the alarm." ::= { ntcProtTsOIpInAlarmStatusEntry 3 } ntcProtTsOIpInBufferOverflow OBJECT-TYPE SYNTAX NtcAlarmState MAX-ACCESS read-only STATUS current DESCRIPTION "This alarm is raised when the input data buffer of TS over IP is full. This variable indicates the current status of the alarm." ::= { ntcProtTsOIpInAlarmStatusEntry 4 } ntcProtTsOIpInRtpNoSync OBJECT-TYPE SYNTAX NtcAlarmState MAX-ACCESS read-only STATUS current DESCRIPTION "This alarm is raised when no valid RTP input data is received. This variable indicates the current status of the alarm." ::= { ntcProtTsOIpInAlarmStatusEntry 5 } ntcProtTsOIpInAlRedFailure OBJECT-TYPE SYNTAX NtcAlarmState MAX-ACCESS read-only STATUS current DESCRIPTION "This alarm is raised when a failure in redundancy is detected on a protected TSoIP input interface. This variable indicates the current status of the alarm." ::= { ntcProtTsOIpInAlarm 1 } ntcProtTsOIpInAlRedDegraded OBJECT-TYPE SYNTAX NtcAlarmState MAX-ACCESS read-only STATUS current DESCRIPTION "This alarm is raised when one of the interface of a redundant TSoIP input interface is down. This variable indicates the current status of the alarm." ::= { ntcProtTsOIpInAlarm 2 } ntcProtTsOIpInAlNoInputData OBJECT-TYPE SYNTAX NtcAlarmState MAX-ACCESS read-only STATUS current DESCRIPTION "This alarm is raised when no input data is received for at least one of the the redundant TS over IP inputs. This variable indicates the current status of the alarm." ::= { ntcProtTsOIpInAlarm 3 } ntcProtTsOIpInAlBufferUnderflow OBJECT-TYPE SYNTAX NtcAlarmState MAX-ACCESS read-only STATUS current DESCRIPTION "This alarm is raised when the input data buffer is below the minimum value. This variable indicates the current status of the alarm." ::= { ntcProtTsOIpInAlarm 4 } ntcProtTsOIpInAlBufferOverflow OBJECT-TYPE SYNTAX NtcAlarmState MAX-ACCESS read-only STATUS current DESCRIPTION "This alarm is raised when the input data buffer of TS over IP is full. This variable indicates the current status of the alarm." ::= { ntcProtTsOIpInAlarm 5 } ntcProtTsOIpInAlRtpNoSync OBJECT-TYPE SYNTAX NtcAlarmState MAX-ACCESS read-only STATUS current DESCRIPTION "This alarm is raised when no valid RTP input data is received. This variable indicates the current status of the alarm." ::= { ntcProtTsOIpInAlarm 6 } ntcProtTsOIpInNpRangeThrEnable OBJECT-TYPE SYNTAX NtcEnable MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable the Null Packet Rate Threshold." DEFVAL { off } ::= { ntcProtTsOIpInNpRangeThr 1 } ntcProtTsOIpInNpRangeThrMaxRate OBJECT-TYPE SYNTAX Unsigned32 UNITS "bps" MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum Null Packets Bit Rate." DEFVAL { 0 } ::= { ntcProtTsOIpInNpRangeThr 2 } ntcProtTsOIpInNpRangeTimeWindow OBJECT-TYPE SYNTAX Integer32 (1..50) UNITS "s" MAX-ACCESS read-write STATUS current DESCRIPTION "Specify the time window in seconds." DEFVAL { 4 } ::= { ntcProtTsOIpInNpRangeThr 3 } -- -- Module Conformance -- ntcProtTsOIpInConfGrpV1Standard OBJECT-GROUP OBJECTS { ntcProtTsOIpInEnable, ntcProtTsOIpInProtInpSelection, ntcProtTsOIpInInpSelection, ntcProtTsOIpInTsEncapProtocol, ntcProtTsOIpInIpAddressType, ntcProtTsOIpInMulticastAddress, ntcProtTsOIpInMulticastSourceA, ntcProtTsOIpInMulticastSourceB, ntcProtTsOIpInUdpPort, ntcProtTsOIpInTrafficProfile, ntcProtTsOIpInInputRateType, ntcProtTsOIpInAutoPcrDetection, ntcProtTsOIpInPcrPid, ntcProtTsOIpInMaxBufferDelay, ntcProtTsOIpInInputTsBitRate, ntcProtTsOIpInCounterReset, ntcProtTsOIpInMInpSelTsBRate, ntcProtTsOIpInSwitchCount, ntcProtTsOIpInActiveInput, ntcProtTsOIpInMonMeasInTsBitRate, ntcProtTsOIpInMonBufferDelay, ntcProtTsOIpInMonMinBufferFill, ntcProtTsOIpInMonMaxBufferFill, ntcProtTsOIpInMonSourceInfo, ntcProtTsOIpInMonRtpFecScheme, ntcProtTsOIpInMonTsInCount, ntcProtTsOIpInMonRtpInCount, ntcProtTsOIpInMonRtpColFecInCnt, ntcProtTsOIpInMonRtpRowFecInCnt, ntcProtTsOIpInMonTsOutCount, ntcProtTsOIpInMonTsDropCount, ntcProtTsOIpInMonTsOverflowCount, ntcProtTsOIpInMonRtpDropCount, ntcProtTsOIpInMonRtpFecDropCount, ntcProtTsOIpInMonRtpRepairCount, ntcProtTsOIpInActivePcrPid, ntcProtTsOIpInNoInputData, ntcProtTsOIpInBufferUnderflow, ntcProtTsOIpInBufferOverflow, ntcProtTsOIpInRtpNoSync, ntcProtTsOIpInAlRedFailure, ntcProtTsOIpInAlRedDegraded, ntcProtTsOIpInAlNoInputData, ntcProtTsOIpInAlBufferUnderflow, ntcProtTsOIpInAlBufferOverflow, ntcProtTsOIpInAlRtpNoSync, ntcProtTsOIpInNpRangeThrEnable, ntcProtTsOIpInNpRangeThrMaxRate, ntcProtTsOIpInNpRangeTimeWindow } STATUS current DESCRIPTION "Managed objects that constitute version 1 of a system device with standard capabilities." ::= { ntcProtTsOIpInConfGroup 1} ntcProtTsOIpInConfCompV1Standard MODULE-COMPLIANCE STATUS current DESCRIPTION "Compliance statement for Newtec device MIB implementations." MODULE -- this module MANDATORY-GROUPS { ntcProtTsOIpInConfGrpV1Standard } ::= { ntcProtTsOIpInConfCompliance 1 } END