NEWTEC-ASIIN-MIB DEFINITIONS ::= BEGIN

IMPORTS
    Unsigned32,
    Counter32,
    Integer32,
    MODULE-IDENTITY,
    OBJECT-IDENTITY,
    OBJECT-TYPE
        FROM SNMPv2-SMI

    MODULE-COMPLIANCE,
    OBJECT-GROUP
        FROM SNMPv2-CONF
    
    Float32TC
        FROM FLOAT-TC-MIB

    NtcAlarmState,
    NtcEnable,
    NtcPid
        FROM NEWTEC-TC-MIB

    ntcFunction
        FROM NEWTEC-MAIN-MIB;


--
--  Module Identification
--

ntcAsiIn   MODULE-IDENTITY
    LAST-UPDATED "201804041000Z"
    ORGANIZATION "Newtec Cy"
    CONTACT-INFO
        "Newtec Cy
         Postal: Newtec Cy
                 Laarstraat 5
                 B-9100 Sint-Niklaas
                 Belgium

                Tel: +32 3 780 65 00
                Fax: +32 3 780 65 49
                Web: www.newtec.be
                E-mail: techsupport@newtec.be"
    DESCRIPTION
        "Newtec modular ASI input MIB containing definitions for ASI input
        functionality."

    REVISION  "201804041000Z"
    DESCRIPTION
        "NullPacketrate threshold vardefs added"
    REVISION  "201707101200Z"
    DESCRIPTION
        "ntcAsiInPrbsGenType description updated and ntcAsiInInputTsBitRate added"
    REVISION  "201409090900Z"
    DESCRIPTION
        "Descriptions adapted"
    REVISION  "201206281200Z"
    DESCRIPTION
        "Release for M6100 R1.2"
    ::= { ntcFunction  800 }
    

--
-- Top-Level Structure
--

-- ntcAsiIn content

ntcAsiInObjects                  OBJECT-IDENTITY
    STATUS        current
    DESCRIPTION   "Container holding ntcAsiInObjects definitions."
    ::= { ntcAsiIn 1 }
    
ntcAsiInConformance              OBJECT-IDENTITY
    STATUS        current
    DESCRIPTION   "Conformance requirements."
    ::= { ntcAsiIn 2 }
    
-- ntcAsiInObjects content

ntcAsiInPrbsGenerator            OBJECT-IDENTITY
    STATUS        current
    DESCRIPTION   "Container holding ntcAsiInPrbsGenerator definitions."
    ::= { ntcAsiInObjects 7 }
    
ntcAsiInPrbsMonitor              OBJECT-IDENTITY
    STATUS        current
    DESCRIPTION   "Container holding ntcAsiInPrbsMonitor definitions."
    ::= { ntcAsiInObjects 8 }
    
ntcAsiInAlarm                    OBJECT-IDENTITY
    STATUS        current
    DESCRIPTION   "Container holding ntcAsiInAlarm definitions."
    ::= { ntcAsiInObjects 9 }
    
ntcAsiInNpRangeThr               OBJECT-IDENTITY
    STATUS        current
    DESCRIPTION   "Container holding ntcAsiInNpRangeThr definitions."
    ::= { ntcAsiInObjects 11 }
    
-- ntcAsiInConformance content

ntcAsiInConfCompliance           OBJECT-IDENTITY
    STATUS        current
    DESCRIPTION   "Device compliance statements."
    ::= { ntcAsiInConformance 1 }
    
ntcAsiInConfGroup                OBJECT-IDENTITY
    STATUS        current
    DESCRIPTION   "Groups used by device compliance statements."
    ::= { ntcAsiInConformance 2 }
    

--
-- Managed Objects
--

ntcAsiInInputSelection           OBJECT-TYPE
    SYNTAX      INTEGER { none(0), asi1(1), asi2(2), asi1or2(40), asi1before2(41), asi2before1(42), prbsgenerator(100) }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Configuration of the ASI external input interface."
    DEFVAL { none }
    ::= { ntcAsiInObjects 1 }
    
ntcAsiInActiveInput              OBJECT-TYPE
    SYNTAX      INTEGER { off(0), asi1(1), asi2(2) }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Displays the active ASI input interface. When PRBS is selected it will
        indicate 'off'."
    ::= { ntcAsiInObjects 2 }
    
ntcAsiInInlineSplitter           OBJECT-TYPE
    SYNTAX      INTEGER { none(0), e3dBSplitter(1), e6dBSplitter(2) }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Variable to configure the presence of an external in-line splitter with a
        given loss."
    DEFVAL { none }
    ::= { ntcAsiInObjects 3 }
    
ntcAsiInMeasuredInputTsBitRate   OBJECT-TYPE
    SYNTAX      Unsigned32
    UNITS       "bps"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Displays the measured ASI interface input rate in bps."
    ::= { ntcAsiInObjects 4 }
    
ntcAsiInInputFraming             OBJECT-TYPE
    SYNTAX      INTEGER { ts188(0), ts204(1) }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Configuration of the ASI input framing type.
        - 188-byte packets
        - 204-byte packets (188 data bytes and 16 dummy bytes). Before transmission,
        these 16 bytes are ignored and replaced by newly calculated Reed-Solomon
        parity bytes."
    DEFVAL { ts188 }
    ::= { ntcAsiInObjects 5 }
    
ntcAsiInInputIfSwitchCount       OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Counts the number of times the device switched to another ASI input interface."
    ::= { ntcAsiInObjects 6 }
    
ntcAsiInPrbsGenTsBitRate         OBJECT-TYPE
    SYNTAX      Unsigned32
    UNITS       "bps"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The PRBS (Pseudo Random Binary Sequence) generator TS Bit Rate in bps."
    DEFVAL { 1000000 }
    ::= { ntcAsiInPrbsGenerator 1 }
    
ntcAsiInPrbsGenType              OBJECT-TYPE
    SYNTAX      INTEGER { prbs(0), counter(1) }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "
        - PRBS : Configures the test generator to generate transport stream packets
        containing PRBS data. The generated PRBS complies with HP3764 Compatible
        2^23-1 PRBS sequence as specified in CCITT Rec. 0.151.
        - Counter : Configures the test generator to generate transport stream packets
        containing 8-bit counter values as data. This counter data can not be analyzed
        by the test detector. It can only be used for manual verification by an
        external analyzer."
    DEFVAL { prbs }
    ::= { ntcAsiInPrbsGenerator 2 }
    
ntcAsiInPrbsGenPidHandling       OBJECT-TYPE
    SYNTAX      NtcEnable
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Configuration of the PID (Packet Identifier) handling in the PRBS Generator.
        Configuration of the test generator to generate transport stream packets with
        a valid transport stream header. The configured PID is inserted in the
        transport stream header and the continuity counter is incrementing. Possible
        settings;
        - Off: Transport stream packets are generated without a valid transport stream
        header. In this case, a 0x47 sync marker is generated followed by 187 test
        bytes.
        - On: When enabled, transport stream packets are generated with a configurable
        PID. (A burst of TS packets will be generated with a configurable of number
        data packets and a configurable number of null packets.)"
    DEFVAL { off }
    ::= { ntcAsiInPrbsGenerator 3 }
    
ntcAsiInPrbsGenPidValue          OBJECT-TYPE
    SYNTAX      Unsigned32 (0..8191)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Configure the PRBS generator packet PID value."
    DEFVAL { 1 }
    ::= { ntcAsiInPrbsGenerator 4 }
    
ntcAsiInPrbsGenNumberDataPkt     OBJECT-TYPE
    SYNTAX      Unsigned32 (1..4294967295)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Configuration of the number of datapackets per burst. Current devices have an
        upper limit of 255 datapackets per burst."
    DEFVAL { 1 }
    ::= { ntcAsiInPrbsGenerator 5 }
    
ntcAsiInPrbsGenNumberNullPkt     OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Configuration of the number of null packets per burst. Current devices have an
        upper limit of 255 but this may increase in the future."
    DEFVAL { 0 }
    ::= { ntcAsiInPrbsGenerator 6 }
    
ntcAsiInPrbsMonEnable            OBJECT-TYPE
    SYNTAX      NtcEnable
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Enable or disable the PRBS monitoring. When monitoring is enabled the
        statistics are displayed in the following parameters."
    DEFVAL { off }
    ::= { ntcAsiInPrbsMonitor 1 }
    
ntcAsiInPrbsMonPidHandling       OBJECT-TYPE
    SYNTAX      NtcEnable
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Detect/filter out the PID inside data packets of the PRBS monitor. This is
        reflected in the monitoring statistics."
    DEFVAL { off }
    ::= { ntcAsiInPrbsMonitor 2 }
    
ntcAsiInPrbsMonPidValue          OBJECT-TYPE
    SYNTAX      NtcPid
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Configuration of the PRBS monitor data packet PID value."
    DEFVAL { 1 }
    ::= { ntcAsiInPrbsMonitor 3 }
    
ntcAsiInPrbsMonState             OBJECT-TYPE
    SYNTAX      INTEGER { off(0), unsync(1), prbs(2), ais(3) }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Displays the PRBS monitor status. Possible values are: Off, Unsync (no PRBS
        sync) and PRBS (PRBS sync)."
    ::= { ntcAsiInPrbsMonitor 4 }
    
ntcAsiInPrbsMonSyncSeconds       OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates how many seconds the PRBS monitor is synchronized to the PRBS
        stream."
    ::= { ntcAsiInPrbsMonitor 5 }
    
ntcAsiInPrbsMonErrorCount        OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Number of errors detected in the PRBS stream."
    ::= { ntcAsiInPrbsMonitor 6 }
    
ntcAsiInPrbsMonErrorRate         OBJECT-TYPE
    SYNTAX      Unsigned32 (0..21474836470)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Error rate detected in the PRBS stream. Float represented as unsigned integer
        is scaled by a factor of 10. i.e. a value of 100 in SNMP means an error rate
        of 10."
    ::= { ntcAsiInPrbsMonitor 7 }
    
ntcAsiInPrbsMonErrorRatio        OBJECT-TYPE
    SYNTAX      Float32TC
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Displays the error ratio detected in the PRBS stream."
    ::= { ntcAsiInPrbsMonitor 8 }
    
ntcAsiInAlmGeneralAsiInput       OBJECT-TYPE
    SYNTAX      NtcAlarmState
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This alarm is raised when there is a general ASI input alarm. This variable
        indicates the current status of the alarm."
    ::= { ntcAsiInAlarm 1 }
    
ntcAsiInAlmNoInputSignal         OBJECT-TYPE
    SYNTAX      NtcAlarmState
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This alarm is raised when no input signal is detected at the selected ASI
        input. This variable indicates the current status of the alarm."
    ::= { ntcAsiInAlarm 2 }
    
ntcAsiInAlmNoInputData           OBJECT-TYPE
    SYNTAX      NtcAlarmState
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This alarm is raised when no input data is detected at the selected ASI input.
        This variable indicates the current status of the alarm."
    ::= { ntcAsiInAlarm 3 }
    
ntcAsiInAlmInvalidTsBitRate      OBJECT-TYPE
    SYNTAX      NtcAlarmState
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This alarm is raised when the measured input Transport-Stream (TS) bitrate is
        higher or lower than the expected value. This variable indicates the current
        status of the alarm."
    ::= { ntcAsiInAlarm 4 }
    
ntcAsiInAlmBufferOverflow        OBJECT-TYPE
    SYNTAX      NtcAlarmState
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This alarm is raised when the input data buffer is full. This variable
        indicates the current status of the alarm."
    ::= { ntcAsiInAlarm 5 }
    
ntcAsiInAlmNoInputSignalAsi1     OBJECT-TYPE
    SYNTAX      NtcAlarmState
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This alarm is raised when no input signal is detected at the ASI1 input. This
        variable indicates the current status of the alarm."
    ::= { ntcAsiInAlarm 6 }
    
ntcAsiInAlmNoInputSignalAsi2     OBJECT-TYPE
    SYNTAX      NtcAlarmState
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This alarm is raised when no input signal is detected at the ASI2 input. This
        variable indicates the current status of the alarm."
    ::= { ntcAsiInAlarm 7 }
    
ntcAsiInAlmNoInputDataAsi1       OBJECT-TYPE
    SYNTAX      NtcAlarmState
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This alarm is raised when no input data is detected at the ASI1 input. This
        variable indicates the current status of the alarm."
    ::= { ntcAsiInAlarm 8 }
    
ntcAsiInAlmNoInputDataAsi2       OBJECT-TYPE
    SYNTAX      NtcAlarmState
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This alarm is raised when no input data is detected at the ASI2 input. This
        variable indicates the current status of the alarm."
    ::= { ntcAsiInAlarm 9 }
    
ntcAsiInInputTsBitRate           OBJECT-TYPE
    SYNTAX      Unsigned32
    UNITS       "bps"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Displays the ASI interface input rate. Expressed in bps."
    DEFVAL { 1000000 }
    ::= { ntcAsiInObjects 10 }
    
ntcAsiInNpRangeThrEnable         OBJECT-TYPE
    SYNTAX      NtcEnable
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Enable or disable the Null Packet Rate Threshold."
    DEFVAL { off }
    ::= { ntcAsiInNpRangeThr 1 }
    
ntcAsiInNpRangeThrMaxRate        OBJECT-TYPE
    SYNTAX      Unsigned32
    UNITS       "bps"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Maximum Null Packets Bit Rate."
    DEFVAL { 0 }
    ::= { ntcAsiInNpRangeThr 2 }
    
ntcAsiInNpRangeTimeWindow        OBJECT-TYPE
    SYNTAX      Integer32 (1..50)
    UNITS       "s"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Specify the time window in seconds."
    DEFVAL { 4 }
    ::= { ntcAsiInNpRangeThr 3 }
    

--
--  Module Conformance
--

ntcAsiInConfGrpV1Standard        OBJECT-GROUP
    OBJECTS    {
                   ntcAsiInInputSelection,
                   ntcAsiInActiveInput,
                   ntcAsiInInlineSplitter,
                   ntcAsiInMeasuredInputTsBitRate,
                   ntcAsiInInputFraming,
                   ntcAsiInInputIfSwitchCount,
                   ntcAsiInPrbsGenTsBitRate,
                   ntcAsiInPrbsGenType,
                   ntcAsiInPrbsGenPidHandling,
                   ntcAsiInPrbsGenPidValue,
                   ntcAsiInPrbsGenNumberDataPkt,
                   ntcAsiInPrbsGenNumberNullPkt,
                   ntcAsiInPrbsMonEnable,
                   ntcAsiInPrbsMonPidHandling,
                   ntcAsiInPrbsMonPidValue,
                   ntcAsiInPrbsMonState,
                   ntcAsiInPrbsMonSyncSeconds,
                   ntcAsiInPrbsMonErrorCount,
                   ntcAsiInPrbsMonErrorRate,
                   ntcAsiInPrbsMonErrorRatio,
                   ntcAsiInAlmGeneralAsiInput,
                   ntcAsiInAlmNoInputSignal,
                   ntcAsiInAlmNoInputData,
                   ntcAsiInAlmInvalidTsBitRate,
                   ntcAsiInAlmBufferOverflow,
                   ntcAsiInAlmNoInputSignalAsi1,
                   ntcAsiInAlmNoInputSignalAsi2,
                   ntcAsiInAlmNoInputDataAsi1,
                   ntcAsiInAlmNoInputDataAsi2,
                   ntcAsiInInputTsBitRate,
                   ntcAsiInNpRangeThrEnable,
                   ntcAsiInNpRangeThrMaxRate,
                   ntcAsiInNpRangeTimeWindow
               }
    STATUS      current
    DESCRIPTION
        "Managed objects that constitute version 1 of a system device with standard capabilities."
    ::= { ntcAsiInConfGroup 1}
    
ntcAsiInConfCompV1Standard       MODULE-COMPLIANCE
    STATUS      current
    DESCRIPTION
        "Compliance statement for Newtec device MIB implementations."
    MODULE  -- this module
    MANDATORY-GROUPS
                  {
                      ntcAsiInConfGrpV1Standard
                  }
    ::= { ntcAsiInConfCompliance  1 }
    

END