NETI-CONFIG-MIB DEFINITIONS ::= BEGIN

-- -------------------------------------------------------------
-- MIB for controlling configurations and backup 
-- -------------------------------------------------------------

IMPORTS
    MODULE-IDENTITY, OBJECT-TYPE, Gauge32
        FROM SNMPv2-SMI
    RowStatus, DisplayString, DateAndTime, TruthValue
        FROM SNMPv2-TC
    netiExperimentalGeneric
        FROM NETI-COMMON-MIB;

netiConfigMIB MODULE-IDENTITY
    LAST-UPDATED 
        "0002090000Z"  -- tbd: date
    ORGANIZATION 
        "Net Insight AB"
    CONTACT-INFO
        "Martin Carlsson
         Net Insight AB
         E-mail: martin.carlsson@netinsight.se"
    DESCRIPTION
        "tbd: Describe the configuration model"
    ::= { netiExperimentalGeneric 7 }

netiConfigMIBObjects OBJECT IDENTIFIER ::= { netiConfigMIB 1 }


-- -------------------------------------------------------------
-- Groups in the NETI-CONFIG-MIB
-- -------------------------------------------------------------

configStatusGroup OBJECT IDENTIFIER ::= { netiConfigMIBObjects 1 }
configLocalGroup OBJECT IDENTIFIER ::= { netiConfigMIBObjects 2 }
configBackupGroup OBJECT IDENTIFIER ::= { netiConfigMIBObjects 3 }


-- -------------------------------------------------------------
-- The configuration status group
-- -------------------------------------------------------------

-- Shows the status of the current (running) configuration in the node.

configStatusIsCurrentUnsaved OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Set to true if the current configuration in the
         node contains unsaved data."
    ::= { configStatusGroup 1 }

configStatusCurrentLastChangedTime OBJECT-TYPE
    SYNTAX      DateAndTime
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The date and time when the current configuration
         was last changed."
    ::= { configStatusGroup 2 }


-- -------------------------------------------------------------
-- The local storage configuration table group
-- -------------------------------------------------------------

-- The configuration handling group consists of configuration 
-- status information and list of configuration files currently 
-- stored locally in the node.

-- If storing a configuration file fails (see the backup group) 
-- this may be caused by the fact that the configuration store is
-- full. In this case the manager can try and remove one of 
-- the entries (perhaps the oldest) and try again.

configLocalTableLastChangedTime OBJECT-TYPE
    SYNTAX      DateAndTime
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The date and time when the configuration table was 
         last changed."
    ::= { configLocalGroup 2 }

configLocalTableNrOfConfigs OBJECT-TYPE
    SYNTAX      Gauge32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of configurations currently in the 
         configuration table."
    ::= { configLocalGroup 3 }

configLocalTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF ConfigLocalEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Table of configuration files stored in the node."
    ::= { configLocalGroup 4 }

configLocalEntry OBJECT-TYPE
    SYNTAX      ConfigLocalEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each entry describes one configuration file."
    INDEX { configLocalIndex }
    ::= { configLocalTable 1 }

ConfigLocalEntry ::= SEQUENCE {
    configLocalIndex          INTEGER,
    configLocalName           DisplayString,
    configLocalDescription    DisplayString,
    configLocalCreatedTime    DateAndTime,
    configLocalSize           INTEGER,
    configLocalAdminStatus    INTEGER,
    configLocalRowStatus      RowStatus }

configLocalIndex OBJECT-TYPE
    SYNTAX      INTEGER (1..2147483647)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Index in the config table."
    ::= { configLocalEntry 1 }

configLocalName OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The name of the configuration file."
    ::= { configLocalEntry 2 }

configLocalDescription OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "A textual description of the configuration."
    ::= { configLocalEntry 3 }

configLocalCreatedTime OBJECT-TYPE
    SYNTAX      DateAndTime
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "The date and time when the configuration was created."
    ::= { configLocalEntry 4 }

configLocalSize OBJECT-TYPE
    SYNTAX      INTEGER (0..2147483647)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The size in bytes of the configuration filed."
    ::= { configLocalEntry 5 }

configLocalAdminStatus OBJECT-TYPE
    SYNTAX      INTEGER {
                    enabled(1),
                    disabled(2) }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Set to enabled if this is the configuration to
         be loaded at boot time."
    ::= { configLocalEntry 6 }

configLocalRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Note that local configurations are created by doing a
         backup, see the backup group."
    ::= { configLocalEntry 7 }


-- -------------------------------------------------------------
-- The configuration backup group
-- -------------------------------------------------------------

-- The backup groups contains variables to intitiate backups.
-- tbd: Could perhaps be extended to handle backups over TFTP/FTP
-- and upload over TFTP/FTP and perhaps even scheduled backups...

configBackupOperation OBJECT-TYPE
    SYNTAX  INTEGER {
                idle (1),   
                writeCurrentToLocal (2) }   
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The backup operations supported:

         idle
         Resets the function.

         writeCurrentToLocal
         Writes the current config to local storage.
         Uses configBackupName and configBackupDescription."
    ::= { configBackupGroup 1 }

configBackupStatus OBJECT-TYPE
    SYNTAX  INTEGER {
                idle (1),
                inProgress (2),
                failed (3),
                ready (4) }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The status of the backup function:
         
         idle
         The function is idle.
         
         inProgress
         A backup operation is in progress.
         
         failed
         The operation has failed.
         
         ready 
         The operation is finished and has succeeded."
    ::= { configBackupGroup 2 }

configBackupName OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The name of the configuration file.
         Defaults to a string containing the 
         date and time."
    ::= { configBackupGroup 3 }

configBackupDescription OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The description for the new configuration file.
         Defaults to the empty string."
    ::= { configBackupGroup 4 }
END