-- ======================================================================= -- File : nbvlan.mib -- Description : Private Extention MIB for NBase Switch Communications -- Ethernet Switches -- By : Alex Ruzin -- Version : $Revision: 1.2 $ -- Date : $Date: 2008/09/04 13:09:36 $ -- ======================================================================= -- -- -- Copyright (c) 1995 NBase Switch Communications. All Rights Reserved. -- -- Reproduction of this document is authorized on condition that this -- copyright notice is included. This NBase SNMP MIB Specification -- embodies NBase's proprietary intellectual property. NBase -- retains all title and ownership in the specification, including any -- revisions. -- -- It is NBase's intent to encourage the widespread use of this -- specification in connection with the management of NBase's -- products. NBase grants vendor, end-users, and other interested -- parties a non-exclusive license to use this specification in -- connection with the management of NBase's products. -- -- This specification is supplied "AS IS," and NBase makes no -- warranty, either express or implied, as to the use, operation, -- condition, or performance of the specification. -- -- Copyright text courtesy of S. Rotenstein. -- -- If you have any questions about this MIB, please call NBase -- Technical Support Center at 1-800-858-7815 from inside USA or -- 1-818-773-0900 from outside USA. -- -- -- NBase retains the right to change this MIB without notification. -- -- VLAN-MIB DEFINITIONS ::= BEGIN IMPORTS enterprises FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212 nbSwitchG1Il FROM OS-COMMON-TC-MIB DisplayString FROM RFC1213-MIB; MacAddress ::= OCTET STRING(SIZE(6)) PortsBitmap ::= OCTET STRING -- Set of ports. Each octet -- within the value of this object specifies a set of -- eight ports, with the first octet specifying ports -- 1 through 8, the second octet specifying ports 9 -- through 16, etc. Within each octet, the most -- significant bit represents the lowest numbered -- port, and the least significant bit represents the -- highest numbered port. Thus, each port of the -- switch is represented by a single bit within the -- value of this object. If that bit has a value of -- <1> then that port is included in the set of -- ports; the port is not included if its bit has a -- value of <0>. (Note that the setting of the bit -- corresponding to the port from which a frame is -- received is irrelevant.) The default value of -- this object is a string of ones of appropriate -- length." -- ************************************************************ -- Object Identifiers Definition -- ************************************************************ nbVlans OBJECT IDENTIFIER ::= { nbSwitchG1Il 3 } -- GROUPS in VLAN-MIB nbVlansRun OBJECT IDENTIFIER ::= { nbVlans 1 } nbVlansPerm OBJECT IDENTIFIER ::= { nbVlans 2 } -- nbVlansRun group nbVlansRunVlansMode OBJECT-TYPE SYNTAX INTEGER { noneVlan (1), vbcMode (2), isvpMode (3) } ACCESS read-write STATUS mandatory DESCRIPTION "VLAN mode" ::= { nbVlansRun 1 } nbVlansRunIngressType OBJECT-TYPE SYNTAX INTEGER { nonControl (1), perDeviceOnly (2), perPort (3) } ACCESS read-only STATUS mandatory DESCRIPTION "Describes type of Ingress Filtering of the device. The nbVlansRunIngressPorts and nbVlansPermIngressPorts may not be supported in the perDeviceOnly(2) case. Set new value for nbVlansRunIngressType and/or nbVlansPermIngressType in perPort (3) should change this value for all ports in nbVlansRunIngressPorts and/or nbVlansPermIngressPorts." ::= { nbVlansRun 2 } nbVlansRunIngressMode OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Run ingress filtering mode of the device." ::= { nbVlansRun 3 } nbVlansRunIngressPorts OBJECT-TYPE SYNTAX PortsBitmap ACCESS read-write STATUS mandatory DESCRIPTION "If Ingress mode for the port is enabled (the bit of the port is set to 1, switch checks whether the source-port is a member of the VLAN." ::= { nbVlansRun 4 } nbVlansRunEgressType OBJECT-TYPE SYNTAX INTEGER { nonControl (1), perDeviceOnly (2), perPort (3) } ACCESS read-only STATUS mandatory DESCRIPTION "Describes type of Egress Filtering of the device. The nbVlansRunEgressPorts and nbVlansPermEgressPorts may not be supported in the perDeviceOnly(2) case. Set new value for nbVlansRunEgressType and/or nbVlansPermEgressType in perPort (3) should change this value for all ports in nbVlansRunEgressPorts and/or nbVlansPermEgressPorts." ::= { nbVlansRun 5 } nbVlansRunEgressMode OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Run egress filtering mode of the device." ::= { nbVlansRun 6 } nbVlansRunEgressPorts OBJECT-TYPE SYNTAX PortsBitmap ACCESS read-write STATUS mandatory DESCRIPTION "If Egress mode for the port is enabled (the bit of the port is set to 1, switch checks whether the source-port is a member of the VLAN." ::= { nbVlansRun 7 } nbVlansRunMgmtTable OBJECT-TYPE SYNTAX SEQUENCE OF NbVlansRunMgmtEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table that contains Management Isvp tags" ::= { nbVlansRun 8 } nbVlansRunMgmtEntry OBJECT-TYPE SYNTAX NbVlansRunMgmtEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of Management Isvp tags" INDEX { nbVlansRunMgmtTag } ::= { nbVlansRunMgmtTable 1 } NbVlansRunMgmtEntry ::= SEQUENCE { nbVlansRunMgmtTag INTEGER, nbVlansRunMgmtList PortsBitmap, nbVlansRunMgmtName DisplayString, nbVlansRunMgmtTagStatus INTEGER } nbVlansRunMgmtTag OBJECT-TYPE SYNTAX INTEGER (2..4096) ACCESS read-write STATUS mandatory DESCRIPTION "The Tag for the Mgmt VLAN." ::= { nbVlansRunMgmtEntry 1 } nbVlansRunMgmtList OBJECT-TYPE SYNTAX PortsBitmap ACCESS read-write STATUS mandatory DESCRIPTION "Bitmap of ports in the management VLAN." ::= { nbVlansRunMgmtEntry 2 } nbVlansRunMgmtName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..15)) ACCESS read-write STATUS mandatory DESCRIPTION "Contains an optional name for the VLAN." ::= { nbVlansRunMgmtEntry 3 } nbVlansRunMgmtTagStatus OBJECT-TYPE SYNTAX INTEGER { valid (1), -- the entry is valid and active invalid(2) -- the entry is invalid } ACCESS read-write STATUS mandatory DESCRIPTION "The status for the Mgmt VLAN." ::= { nbVlansRunMgmtEntry 4 } nbVlansRunSrvrTable OBJECT-TYPE SYNTAX SEQUENCE OF NbVlansRunSrvrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table that contains Server Isvp VLANs information" ::= { nbVlansRun 9 } nbVlansRunSrvrEntry OBJECT-TYPE SYNTAX NbVlansRunSrvrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The entry describes Server Isvp VLAN" INDEX { nbVlansRunSrvrPort } ::= { nbVlansRunSrvrTable 1 } NbVlansRunSrvrEntry ::= SEQUENCE { nbVlansRunSrvrPort INTEGER, nbVlansRunSrvrPortStatus INTEGER, nbVlansRunSrvrPortTag INTEGER } nbVlansRunSrvrPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of port to be managed" ::= { nbVlansRunSrvrEntry 1 } nbVlansRunSrvrPortStatus OBJECT-TYPE SYNTAX INTEGER { nonServer (1), server (2) } ACCESS read-write STATUS mandatory DESCRIPTION "The server status of the port" ::= { nbVlansRunSrvrEntry 2 } nbVlansRunSrvrPortTag OBJECT-TYPE SYNTAX INTEGER (2..4096) ACCESS read-write STATUS mandatory DESCRIPTION "Tag of server port." ::= { nbVlansRunSrvrEntry 3 } nbVlansRunPortsCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF NbVlansRunPortsCfgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table that contains VLAN Ports configuration" ::= { nbVlansRun 10 } nbVlansRunPortsCfgEntry OBJECT-TYPE SYNTAX NbVlansRunPortsCfgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The entry describes VLAN Port Configuration" INDEX { nbVlansRunPort } ::= { nbVlansRunPortsCfgTable 1 } NbVlansRunPortsCfgEntry ::= SEQUENCE { nbVlansRunPort INTEGER, nbVlansRunPortPriority INTEGER, nbVlansRunPortTagOutMode INTEGER } nbVlansRunPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of port to be managed" ::= { nbVlansRunPortsCfgEntry 1 } nbVlansRunPortPriority OBJECT-TYPE SYNTAX INTEGER (1..8) ACCESS read-write STATUS mandatory DESCRIPTION "The priority of the port" ::= { nbVlansRunPortsCfgEntry 2 } nbVlansRunPortTagOutMode OBJECT-TYPE SYNTAX INTEGER { access (1), tagAware (2), nonIsvp (3) } ACCESS read-write STATUS mandatory DESCRIPTION "The tag outbound mode of the port. All frames, outgoing from the 'access' port, have no VLAN tag. All frames, outgoing from the 'tagAware' port have VLAN tag." ::= { nbVlansRunPortsCfgEntry 3 } nbVlansRunPriorityPolicy OBJECT-TYPE SYNTAX INTEGER (1..4) ACCESS read-write STATUS mandatory DESCRIPTION "This value reflects the forwarding ratio between the different priorities. The highest value (4) says that the higher priority frames are favored then lower. The lowest value (1) says that all frames will be forwarded with the same ration independent from their priorities." ::= { nbVlansRun 11 } -- ************************************************************ -- The Running InterSwitch Virtual Lans Data Base -- ************************************************************ nbVlansRunIsvMaxNum OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Maximum number of InterSwitch Virtual LANs that are supported" ::= { nbVlansRun 12 } nbVlansRunIsvTable OBJECT-TYPE SYNTAX SEQUENCE OF NbVlansRunIsvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of the current InetrSwitch Virtual LANs defined. Number of entries is given by nbVlansRunSvlanMaxNum" ::= { nbVlansRun 13 } nbVlansRunIsvEntry OBJECT-TYPE SYNTAX NbVlansRunIsvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Contains the descriptor of a InterSwitch Virtual LAN." INDEX { nbVlansRunIsvIndex } ::= { nbVlansRunIsvTable 1 } NbVlansRunIsvEntry ::= SEQUENCE { nbVlansRunIsvIndex INTEGER, nbVlansRunIsvStatus INTEGER, nbVlansRunIsvList OCTET STRING, nbVlansRunIsvName DisplayString, nbVlansRunIsvTag INTEGER, nbVlansRunIsvVlanIndex INTEGER, nbVlansRunIsvVlanPriority INTEGER } nbVlansRunIsvIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The serial number of this entry in the nbVlansRunIsvTbl. It may range from 1 to the value of nbVlansRunIsvMaxNum." ::= { nbVlansRunIsvEntry 1 } nbVlansRunIsvStatus OBJECT-TYPE SYNTAX INTEGER { valid (1), -- the entry is valid and active invalid(2), -- the entry is invalid mcast(3) -- the entry is of Multicast type } ACCESS read-write STATUS mandatory DESCRIPTION "The object is used to create/delete entries in the nbVlansRunIsvTable table. Setting this value to invalid(2) for a certain nbVlansRunIsvIndex, deletes this entry. To create a new entry a SET PDU with the nbVlansRunIsvList and nbVlansRunIsvStatus=valid(1) tags from 3001 till 4095. This value is only for get." ::= { nbVlansRunIsvEntry 2 } nbVlansRunIsvList OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Contains the list of the ports grouped together in this Virtual LAN. The representation is a bit map. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the switch is represented by a single bit within the value of this object. If that bit has a value of <1> then that port is included in the set of ports; the port is not included if its bit has a value of <0>. (Note that the setting of the bit corresponding to the port from which a frame is received is irrelevant.) The default value of this object is a string of ones of appropriate length, except for the source port bit." DEFVAL { '1111111111111111'b} ::= { nbVlansRunIsvEntry 3 } nbVlansRunIsvName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..15)) ACCESS read-write STATUS mandatory DESCRIPTION "Contains an optional name for the VLAN." ::= { nbVlansRunIsvEntry 4 } nbVlansRunIsvTag OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "A 12 bit Port VLAN Identifier for this Port. 0 - The Null VLAN ID.used when the Tag Header contains only user_priority information; No VLAN identifier is present in the frame. This number is not allowed here. 1 - The Default PVID value used for tagging frames through a Bridge Port. The PVID used for tagging of frames can be changed by management. MegaSwitch II ISVLAN card supports up to 8 bits, i.e. values of 0..256. " DEFVAL { 1 } ::= { nbVlansRunIsvEntry 5 } nbVlansRunIsvVlanIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Contains an index in the nbVlansRunSvlanTable for this InterSwitch VLAN." ::= { nbVlansRunIsvEntry 6 } nbVlansRunIsvVlanPriority OBJECT-TYPE SYNTAX INTEGER (1..8) ACCESS read-write STATUS mandatory DESCRIPTION "Contains an priority of this InterSwitch VLAN." ::= { nbVlansRunIsvEntry 7 } -- ************************************************************* -- Objects in the Virtual Priority Tag (VPT) to Queue Parameters Group -- ************************************************************* nbVlansRunVPT2PriorityTable OBJECT-TYPE SYNTAX SEQUENCE OF NbVlansRunVPT2PriorityEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table of VPT to Priority in the Device." ::= { nbVlansRun 15 } nbVlansRunVPT2PriorityEntry OBJECT-TYPE SYNTAX NbVlansRunVPT2PriorityEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the table, containing information about the VPT to Priority in the Device feature." INDEX { nbVlansRunVPT2PriorVPTNumber } ::= { nbVlansRunVPT2PriorityTable 1 } NbVlansRunVPT2PriorityEntry ::= SEQUENCE { nbVlansRunVPT2PriorVPTNumber INTEGER, nbVlansRunVPT2PriorPriorNumber INTEGER } nbVlansRunVPT2PriorVPTNumber OBJECT-TYPE SYNTAX INTEGER (0..7) ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { nbVlansRunVPT2PriorityEntry 1 } nbVlansRunVPT2PriorPriorNumber OBJECT-TYPE SYNTAX INTEGER (0..3) ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { nbVlansRunVPT2PriorityEntry 2 } -- ************************************************************* -- Objects in the Priority to Virtual Priority Tag (VPT) Group -- ************************************************************* nbVlansRunPriority2VPTTable OBJECT-TYPE SYNTAX SEQUENCE OF NbVlansRunPriority2VPTEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table of Priority to VPT in the Device." ::= { nbVlansRun 16 } nbVlansRunPriority2VPTEntry OBJECT-TYPE SYNTAX NbVlansRunPriority2VPTEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the table, containing information about the Priority to VPT in the Device feature." INDEX { nbVlansRunPrior2VPTPriorNumber } ::= { nbVlansRunPriority2VPTTable 1 } NbVlansRunPriority2VPTEntry ::= SEQUENCE { nbVlansRunPrior2VPTPriorNumber INTEGER, nbVlansRunPrior2VPTVPTNumber INTEGER } nbVlansRunPrior2VPTPriorNumber OBJECT-TYPE SYNTAX INTEGER (0..3) ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { nbVlansRunPriority2VPTEntry 1 } nbVlansRunPrior2VPTVPTNumber OBJECT-TYPE SYNTAX INTEGER (0..7) ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { nbVlansRunPriority2VPTEntry 2 } -- ***************************************************************************************** -- Objects in the Port VMAN (Virtual Metro Area Network) Mode Table for the Running Database -- ***************************************************************************************** nbVlansRunSlotEtherTypeTable OBJECT-TYPE SYNTAX SEQUENCE OF NbVlansRunSlotEtherTypeEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table of Priority to VPT in the Device." ::= { nbVlansRun 20 } nbVlansRunSlotEtherTypeEntry OBJECT-TYPE SYNTAX NbVlansRunSlotEtherTypeEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the table, containing information about the Ethernet Type of the Slot in the Device." INDEX { nbVlansRunSlotNumber } ::= { nbVlansRunSlotEtherTypeTable 1 } NbVlansRunSlotEtherTypeEntry ::= SEQUENCE { nbVlansRunSlotNumber INTEGER, nbVlansRunSlotEtherType INTEGER } nbVlansRunSlotNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of Slot to be managed in the Device." ::= { nbVlansRunSlotEtherTypeEntry 1 } nbVlansRunSlotEtherType OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Ethernet Type of the Slot." ::= { nbVlansRunSlotEtherTypeEntry 2 } -- ***************************************************************************************** -- Objects in the Port VMAN (Virtual Metro Area Network) Mode Table for the Running Database -- ***************************************************************************************** nbVlansRunVMANPortTable OBJECT-TYPE SYNTAX SEQUENCE OF NbVlansRunVMANPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table that contains VLAN Ports configuration" ::= { nbVlansRun 22 } nbVlansRunVMANPortEntry OBJECT-TYPE SYNTAX NbVlansRunVMANPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The entry describes VLAN Port Configuration" INDEX { nbVlansRunVMANPortNumber } ::= { nbVlansRunVMANPortTable 1 } NbVlansRunVMANPortEntry ::= SEQUENCE { nbVlansRunVMANPortNumber INTEGER, nbVlansRunVMANPortMode INTEGER } nbVlansRunVMANPortNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of Port to be managed in the Device." ::= { nbVlansRunVMANPortEntry 1 } nbVlansRunVMANPortMode OBJECT-TYPE SYNTAX INTEGER { other (1), enable (2), disable (3) } ACCESS read-write STATUS mandatory DESCRIPTION "The VMAN Mode of the port." ::= { nbVlansRunVMANPortEntry 2 } nbVlansRunCPUEtherType OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Ethernet Type of the CPU." ::= { nbVlansRun 23 } -- ************************************************************* -- Objects in the Port MAC-Limit Table for the Running Database. -- ************************************************************* nbVlansRunMacLimitGroup OBJECT IDENTIFIER ::= { nbVlansRun 24} nbVlansRunPortMacLimitActionMode OBJECT-TYPE SYNTAX INTEGER { none (1), trapOnly (2), portDisable (3), discardExceeded (4) } ACCESS read-write STATUS mandatory DESCRIPTION "The action to take on the Port if the MAC Limit is exceeded." ::= { nbVlansRunMacLimitGroup 1 } nbVlansRunPortMacLimitActionDescription OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The description of the action taken on the Port when the MAC Limit was exceeded." ::= { nbVlansRunMacLimitGroup 2 } nbVlansRunPortMacLimitTable OBJECT-TYPE SYNTAX SEQUENCE OF NbVlansRunPortMacLimitEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table of maximum number of MAC Addresses for the Ports." ::= { nbVlansRunMacLimitGroup 10 } nbVlansRunPortMacLimitEntry OBJECT-TYPE SYNTAX NbVlansRunPortMacLimitEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the table, containing information about the maximum number of MAC Addresses for the Port." INDEX { nbVlansRunPortMacLimitPortNumber } ::= { nbVlansRunPortMacLimitTable 1 } NbVlansRunPortMacLimitEntry ::= SEQUENCE { nbVlansRunPortMacLimitPortNumber INTEGER, nbVlansRunPortMacLimitValue INTEGER } nbVlansRunPortMacLimitPortNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of Port in the Device." ::= { nbVlansRunPortMacLimitEntry 1 } nbVlansRunPortMacLimitValue OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Maximum number of MAC Addresses for the Port [ <= 65535 ]." ::= { nbVlansRunPortMacLimitEntry 2 } -- ***************************************************************************************** -- nbVlansPerm group nbVlansPermVlansMode OBJECT-TYPE SYNTAX INTEGER { noneVlan (1), vbcMode (2), isvpMode (3) } ACCESS read-write STATUS mandatory DESCRIPTION "VLAN mode" ::= { nbVlansPerm 1 } nbVlansPermIngressType OBJECT-TYPE SYNTAX INTEGER { nonControl (1), perDeviceOnly (2), perPort (3) } ACCESS read-only STATUS mandatory DESCRIPTION "Describes type of Ingress Filtering of the device. The nbVlansRunIngressPorts and nbVlansPermIngressPorts may not be supported in the perDeviceOnly(2) case. Set new value for nbVlansRunIngressType and/or nbVlansPermIngressType in perPort (3) should change this value for all ports in nbVlansRunIngressPorts and/or nbVlansPermIngressPorts." ::= { nbVlansPerm 2 } nbVlansPermIngressMode OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Permanent ingress filtering mode of the device." ::= { nbVlansPerm 3 } nbVlansPermIngressPorts OBJECT-TYPE SYNTAX PortsBitmap ACCESS read-write STATUS mandatory DESCRIPTION "If Ingress mode for the port is enabled (the bit of the port is set to 1, switch checks whether the source port is a member of the VLAN." ::= { nbVlansPerm 4 } nbVlansPermEgressType OBJECT-TYPE SYNTAX INTEGER { nonControl (1), perDeviceOnly (2), perPort (3) } ACCESS read-only STATUS mandatory DESCRIPTION "Describes type of Egress Filtering of the device. The nbVlansRunEgressPorts and nbVlansPermEgressPorts may not be supported in the perDeviceOnly(2) case. Set new value for nbVlansRunEgressType and/or nbVlansPermEgressType in perPort (3) should change this value for all ports in nbVlansRunEgressPorts and/or nbVlansPermEgressPorts." ::= { nbVlansPerm 5 } nbVlansPermEgressMode OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Permanent egress filtering mode of the device." ::= { nbVlansPerm 6 } nbVlansPermEgressPorts OBJECT-TYPE SYNTAX PortsBitmap ACCESS read-write STATUS mandatory DESCRIPTION "If Egress mode for the port is enabled (the bit of the port is set to 1, switch checks whether the source port is a member of the VLAN." ::= { nbVlansPerm 7 } nbVlansPermMgmtTable OBJECT-TYPE SYNTAX SEQUENCE OF NbVlansPermMgmtEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table that contains Management Isvp tags" ::= { nbVlansPerm 8 } nbVlansPermMgmtEntry OBJECT-TYPE SYNTAX NbVlansPermMgmtEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of Management Isvp tags" INDEX { nbVlansPermMgmtTag } ::= { nbVlansPermMgmtTable 1 } NbVlansPermMgmtEntry ::= SEQUENCE { nbVlansPermMgmtTag INTEGER, nbVlansPermMgmtList PortsBitmap, nbVlansPermMgmtName DisplayString, nbVlansPermMgmtTagStatus INTEGER } nbVlansPermMgmtTag OBJECT-TYPE SYNTAX INTEGER (2..4096) ACCESS read-write STATUS mandatory DESCRIPTION "The Tag for the Mgmt VLAN." ::= { nbVlansPermMgmtEntry 1 } nbVlansPermMgmtList OBJECT-TYPE SYNTAX PortsBitmap ACCESS read-write STATUS mandatory DESCRIPTION "Bitmap of ports in the management VLAN." ::= { nbVlansPermMgmtEntry 2 } nbVlansPermMgmtName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..15)) ACCESS read-write STATUS mandatory DESCRIPTION "Contains an optional name for the VLAN." ::= { nbVlansPermMgmtEntry 3 } nbVlansPermMgmtTagStatus OBJECT-TYPE SYNTAX INTEGER { valid (1), -- the entry is valid and active invalid(2) -- the entry is invalid } ACCESS read-write STATUS mandatory DESCRIPTION "The status for the Mgmt VLAN." ::= { nbVlansPermMgmtEntry 4 } nbVlansPermSrvrTable OBJECT-TYPE SYNTAX SEQUENCE OF NbVlansPermSrvrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table that contains Server Isvp VLANs information" ::= { nbVlansPerm 9 } nbVlansPermSrvrEntry OBJECT-TYPE SYNTAX NbVlansPermSrvrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The entry describes Server Isvp VLAN" INDEX { nbVlansPermSrvrPort } ::= { nbVlansPermSrvrTable 1 } NbVlansPermSrvrEntry ::= SEQUENCE { nbVlansPermSrvrPort INTEGER, nbVlansPermSrvrPortStatus INTEGER, nbVlansPermSrvrPortTag INTEGER } nbVlansPermSrvrPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of port to be managed." ::= { nbVlansPermSrvrEntry 1 } nbVlansPermSrvrPortStatus OBJECT-TYPE SYNTAX INTEGER { nonServer (1), server (2) } ACCESS read-write STATUS mandatory DESCRIPTION "The server status of the entry" ::= { nbVlansPermSrvrEntry 2 } nbVlansPermSrvrPortTag OBJECT-TYPE SYNTAX INTEGER (2..4096) ACCESS read-write STATUS mandatory DESCRIPTION "Tag of server port." ::= { nbVlansPermSrvrEntry 3 } nbVlansPermPortsCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF NbVlansPermPortsCfgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table that contains VLAN Ports configuration" ::= { nbVlansPerm 10 } nbVlansPermPortsCfgEntry OBJECT-TYPE SYNTAX NbVlansPermPortsCfgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The entry describes VLAN Port Configuration" INDEX { nbVlansPermPort } ::= { nbVlansPermPortsCfgTable 1 } NbVlansPermPortsCfgEntry ::= SEQUENCE { nbVlansPermPort INTEGER, nbVlansPermPortPriority INTEGER, nbVlansPermPortTagOutMode INTEGER } nbVlansPermPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of port to be managed" ::= { nbVlansPermPortsCfgEntry 1 } nbVlansPermPortPriority OBJECT-TYPE SYNTAX INTEGER (1..8) ACCESS read-write STATUS mandatory DESCRIPTION "The priority of the port" ::= { nbVlansPermPortsCfgEntry 2 } nbVlansPermPortTagOutMode OBJECT-TYPE SYNTAX INTEGER { access (1), tagAware (2), nonIsvp (3) } ACCESS read-write STATUS mandatory DESCRIPTION "The tag outbound mode of the port. All frames, outgoing from the 'access' port, have no VLAN tag. All frames, outgoing from the 'tagAware' poort have VLAN tag." ::= { nbVlansPermPortsCfgEntry 3 } nbVlansPermPriorityPolicy OBJECT-TYPE SYNTAX INTEGER (1..4) ACCESS read-write STATUS mandatory DESCRIPTION "This value reflects the forwarding ratio between the different priorities. The highest value (4) says that the higher priority frames are favored then lower. The lowest value (1) says that all frames will be forwarded with the same ration independent from their priorities." ::= { nbVlansPerm 11 } -- ************************************************************ -- The Permanent InterSwitch Virtual Lans Data Base -- ************************************************************ nbVlansPermIsvMaxNum OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Maximum number of InterSwitch Virtual LANs that are supported" ::= { nbVlansPerm 12 } nbVlansPermIsvTable OBJECT-TYPE SYNTAX SEQUENCE OF NbVlansPermIsvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of the current InetrSwitch Virtual LANs defined. Number of entries is given by nbVlansPermSvlanMaxNum" ::= { nbVlansPerm 13 } nbVlansPermIsvEntry OBJECT-TYPE SYNTAX NbVlansPermIsvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Contains the descriptor of a InterSwitch Virtual LAN." INDEX { nbVlansPermIsvIndex } ::= { nbVlansPermIsvTable 1 } NbVlansPermIsvEntry ::= SEQUENCE { nbVlansPermIsvIndex INTEGER, nbVlansPermIsvStatus INTEGER, nbVlansPermIsvList OCTET STRING, nbVlansPermIsvName DisplayString, nbVlansPermIsvTag INTEGER, nbVlansPermIsvVlanPriority INTEGER } nbVlansPermIsvIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The serial number of this entry in the nbVlansPermIsvTbl. It may range from 1 to the value of nbVlansPermIsvMaxNum." ::= { nbVlansPermIsvEntry 1 } nbVlansPermIsvStatus OBJECT-TYPE SYNTAX INTEGER { valid (1), -- the entry is valid and active invalid (2), -- the entry is invalid mcast (3) -- the entry is of Multicast type } ACCESS read-write STATUS mandatory DESCRIPTION "The object is used to create/delete entries in the nbVlansPermIsvTable table. Setting this value to invalid(2) for a certain nbVlansPermIsvIndex, deletes this entry. To create a new entry a SET PDU with the nbVlansPermIsvList and nbVlansPermIsvStatus=valid(1) objects is required. Vlans with mcast status are created by IGMP application in runtime and have tags from 3001 till 4095. This value is only for get." ::= { nbVlansPermIsvEntry 2 } nbVlansPermIsvList OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Contains the list of the ports grouped together in this Virtual LAN. The representation is a bit map. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the switch is represented by a single bit within the value of this object. If that bit has a value of <1> then that port is included in the set of ports; the port is not included if its bit has a value of <0>. (Note that the setting of the bit corresponding to the port from which a frame is received is irrelevant.) The default value of this object is a string of ones of appropriate length, except for the source port bit." DEFVAL { '1111111111111111'b} ::= { nbVlansPermIsvEntry 3 } nbVlansPermIsvName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..15)) ACCESS read-write STATUS mandatory DESCRIPTION "Contains an optional name for the VLAN." ::= { nbVlansPermIsvEntry 4 } nbVlansPermIsvTag OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "A 12 bit Port VLAN Identifier for this Port. 0 - The Null VLAN ID.used when the Tag Header contains only user_priority information; No VLAN identifier is present in the frame. This number is not allowed here. 1 - The Default PVID value used for tagging frames through a Bridge Port. The PVID used for tagging of frames can be changed by management. MegaSwitch II ISVLAN card supports up to 8 bits, i.e. values of 0..256. " DEFVAL { 1 } ::= { nbVlansPermIsvEntry 5 } nbVlansPermIsvVlanPriority OBJECT-TYPE SYNTAX INTEGER (1..8) ACCESS read-write STATUS mandatory DESCRIPTION "Contains an priority of this InterSwitch VLAN." ::= { nbVlansPermIsvEntry 6 } -- ************************************************************* -- Objects in the Virtual Priority Tag (VPT) to Queue Parameters Group (Permanent Data Base) -- ************************************************************* nbVlansPermVPT2PriorityTable OBJECT-TYPE SYNTAX SEQUENCE OF NbVlansPermVPT2PriorityEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table of VPT to Priority in the Device." ::= { nbVlansPerm 15 } nbVlansPermVPT2PriorityEntry OBJECT-TYPE SYNTAX NbVlansPermVPT2PriorityEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the table, containing information about the VPT to Priority in the Device feature." INDEX { nbVlansPermVPT2PriorVPTNumber } ::= { nbVlansPermVPT2PriorityTable 1 } NbVlansPermVPT2PriorityEntry ::= SEQUENCE { nbVlansPermVPT2PriorVPTNumber INTEGER, nbVlansPermVPT2PriorPriorNumber INTEGER } nbVlansPermVPT2PriorVPTNumber OBJECT-TYPE SYNTAX INTEGER (0..7) ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { nbVlansPermVPT2PriorityEntry 1 } nbVlansPermVPT2PriorPriorNumber OBJECT-TYPE SYNTAX INTEGER (0..3) ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { nbVlansPermVPT2PriorityEntry 2 } -- ************************************************************* -- Objects in the Priority to Virtual Priority Tag (VPT) Group -- ************************************************************* nbVlansPermPriority2VPTTable OBJECT-TYPE SYNTAX SEQUENCE OF NbVlansPermPriority2VPTEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table of Priority to VPT in the Device." ::= { nbVlansPerm 16 } nbVlansPermPriority2VPTEntry OBJECT-TYPE SYNTAX NbVlansPermPriority2VPTEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the table, containing information about the Priority to VPT in the Device feature." INDEX { nbVlansPermPrior2VPTPriorNumber } ::= { nbVlansPermPriority2VPTTable 1 } NbVlansPermPriority2VPTEntry ::= SEQUENCE { nbVlansPermPrior2VPTPriorNumber INTEGER, nbVlansPermPrior2VPTVPTNumber INTEGER } nbVlansPermPrior2VPTPriorNumber OBJECT-TYPE SYNTAX INTEGER (0..3) ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { nbVlansPermPriority2VPTEntry 1 } nbVlansPermPrior2VPTVPTNumber OBJECT-TYPE SYNTAX INTEGER (0..7) ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { nbVlansPermPriority2VPTEntry 2 } -- ******************************************************************************************* -- Objects in the Port VMAN (Virtual Metro Area Network) Mode Table for the Permanent Database -- *************************************************************************************88**** nbVlansPermSlotEtherTypeTable OBJECT-TYPE SYNTAX SEQUENCE OF NbVlansPermSlotEtherTypeEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table of Priority to VPT in the Device." ::= { nbVlansPerm 20 } nbVlansPermSlotEtherTypeEntry OBJECT-TYPE SYNTAX NbVlansPermSlotEtherTypeEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the table, containing information about the Ethernet Type of the Slot in the Device." INDEX { nbVlansPermSlotNumber } ::= { nbVlansPermSlotEtherTypeTable 1 } NbVlansPermSlotEtherTypeEntry ::= SEQUENCE { nbVlansPermSlotNumber INTEGER, nbVlansPermSlotEtherType INTEGER } nbVlansPermSlotNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of Slot to be managed in the Device." ::= { nbVlansPermSlotEtherTypeEntry 1 } nbVlansPermSlotEtherType OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Ethernet Type of the Slot." ::= { nbVlansPermSlotEtherTypeEntry 2 } -- ******************************************************************************************* -- Objects in the Port VMAN (Virtual Metro Area Network) Mode Table for the Permanent Database -- ******************************************************************************************* nbVlansPermVMANPortTable OBJECT-TYPE SYNTAX SEQUENCE OF NbVlansPermVMANPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table that contains VLAN Ports configuration" ::= { nbVlansPerm 22 } nbVlansPermVMANPortEntry OBJECT-TYPE SYNTAX NbVlansPermVMANPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The entry describes VLAN Port Configuration" INDEX { nbVlansPermVMANPortNumber } ::= { nbVlansPermVMANPortTable 1 } NbVlansPermVMANPortEntry ::= SEQUENCE { nbVlansPermVMANPortNumber INTEGER, nbVlansPermVMANPortMode INTEGER } nbVlansPermVMANPortNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of Port to be managed in the Device." ::= { nbVlansPermVMANPortEntry 1 } nbVlansPermVMANPortMode OBJECT-TYPE SYNTAX INTEGER { other (1), enable (2), disable (3) } ACCESS read-write STATUS mandatory DESCRIPTION "The VMAN Mode of the port." ::= { nbVlansPermVMANPortEntry 2 } nbVlansPermCPUEtherType OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "Ethernet Type of the CPU." ::= {nbVlansPerm 23 } -- *************************************************************** -- Objects in the Port MAC-Limit Table for the Permanent Database. -- *************************************************************** nbVlansPermMacLimitGroup OBJECT IDENTIFIER ::= { nbVlansPerm 24 } nbVlansPermPortMacLimitActionMode OBJECT-TYPE SYNTAX INTEGER { none (1), trapOnly (2), portDisable (3), discardExceeded (4) } ACCESS read-write STATUS mandatory DESCRIPTION "The action to take on the Port if the MAC Limit is exceeded." ::= { nbVlansPermMacLimitGroup 1 } nbVlansPermPortMacLimitTable OBJECT-TYPE SYNTAX SEQUENCE OF NbVlansPermPortMacLimitEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table of maximum number of MAC Addresses for the Ports." ::= { nbVlansPermMacLimitGroup 10 } nbVlansPermPortMacLimitEntry OBJECT-TYPE SYNTAX NbVlansPermPortMacLimitEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the table, containing information about the maximum number of MAC Addresses for the Port." INDEX { nbVlansPermPortMacLimitPortNumber } ::= { nbVlansPermPortMacLimitTable 1 } NbVlansPermPortMacLimitEntry ::= SEQUENCE { nbVlansPermPortMacLimitPortNumber INTEGER, nbVlansPermPortMacLimitValue INTEGER } nbVlansPermPortMacLimitPortNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of Port in the Device." ::= { nbVlansPermPortMacLimitEntry 1 } nbVlansPermPortMacLimitValue OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Maximum number of MAC Addresses for the Port [ <= 65535 ]." ::= { nbVlansPermPortMacLimitEntry 2 } -- ***************************************************************************************** nbVlansMacTable OBJECT-TYPE SYNTAX SEQUENCE OF NbVlansMacEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table that contains Lerning Table with fields that does not exsist in dot1dTpFdbTable and in nbsMACAddrTable." ::= { nbVlans 3 } nbVlansMacEntry OBJECT-TYPE SYNTAX NbVlansMacEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Information about a specific MAC address in the nbVlansMacTable. While the mac table is implemented as a hash table, for 'next' and 'get' operations the index is nbVlansMacGetViewIndex, but for 'set' operations the PDU must contain the {nbVlansMac, nbVlansMacVid} fields (see nbVlansMacState's DESCRIPTION)." INDEX { nbVlansMacGetViewIndex } ::= { nbVlansMacTable 1 } NbVlansMacEntry ::= SEQUENCE { nbVlansMacGetViewIndex INTEGER, nbVlansMac MacAddress, nbVlansMacVid INTEGER, nbVlansMacVidx INTEGER, nbVlansMacPort INTEGER, nbVlansMacStatus INTEGER, nbVlansMacTagged INTEGER, nbVlansMacState INTEGER, nbVlansMacPriority INTEGER, nbVlansMacFlags INTEGER } nbVlansMacGetViewIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Port of the entry" ::= { nbVlansMacEntry 1 } nbVlansMac OBJECT-TYPE SYNTAX MacAddress ACCESS read-write STATUS mandatory DESCRIPTION "MAC address for which the bridge has forwarding and/or filtering information." ::= { nbVlansMacEntry 2 } nbVlansMacVid OBJECT-TYPE SYNTAX INTEGER (2..4096) ACCESS read-write STATUS mandatory DESCRIPTION "Tag of the entry: the address 'Address recognition' is concatenation of nbVlansMac and nbVlansMacVid" ::= { nbVlansMacEntry 3 } nbVlansMacVidx OBJECT-TYPE SYNTAX INTEGER (2..4096) ACCESS read-write STATUS mandatory DESCRIPTION "Outbound VLAN tag: if frame 'Address recognition' was resolved with this entry, the forwarding will be maked according the VLAN with this tag" ::= { nbVlansMacEntry 4 } nbVlansMacPort OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Port of the entry. '0' value indicates that the port number has not been learned but that the bridge does have some forwarding/filtering information about this address. Another words, the frame will be forwarding 'to the CPU only' and the bridge will sovle, what it must be done with the frame." ::= { nbVlansMacEntry 5 } nbVlansMacStatus OBJECT-TYPE SYNTAX INTEGER { dynamic (1), static (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Status of the entry: Only 'dynamic (1)' entries are aged. Note, that when the bridge is to age some dynamic entry in nbVlansRunVlansMode=isvpMode (3) case, it must delete all statis(2) entres with this MAC " ::= { nbVlansMacEntry 6 } nbVlansMacTagged OBJECT-TYPE SYNTAX INTEGER { no (0), yes (1) } ACCESS read-write STATUS mandatory DESCRIPTION "'Tagged' state of the entry." ::= { nbVlansMacEntry 7 } nbVlansMacState OBJECT-TYPE SYNTAX INTEGER { valid (1), invalid (2) } ACCESS read-write STATUS mandatory DESCRIPTION "State of the entry: Only 'valid(1)' entries participate in the forwarding/filtering process. The new entry is is created when PDU with nbVlansMacState=valid(1), nbVlansMac, nbVlansMacVid and optionally nbVlansMacPort (default '0'), nbVlansMacVidx (default nbVlansMacVid) and nbVlansMacStatus (default dynamic (1)) comes. If {nbVlansMac,nbVlansMacVid} exists, the bridge replaces it. The old entry is deleted when PDU with nbVlansMacState=invalid(2), nbVlansMac, nbVlansMacVid comes. The old entry is modified when PDU with nbVlansMac, nbVlansMacVid and new value of fields nbVlansMacPort and/or nbVlansMacVidx and/or nbVlansMacStatus comes" ::= { nbVlansMacEntry 8 } nbVlansMacPriority OBJECT-TYPE SYNTAX INTEGER { low (0), high (1) } ACCESS read-write STATUS mandatory DESCRIPTION "Controls the priority level of this entry" ::= { nbVlansMacEntry 9 } nbVlansMacFlags OBJECT-TYPE SYNTAX INTEGER { none (0), route (1) } ACCESS read-write STATUS mandatory DESCRIPTION "Specific flags for MAC entry: 0x0001 - Router Entry" ::= { nbVlansMacEntry 10 } nbVlansMaxNumMgmtVlans OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Maximum number of Isvp management VLANs" ::= { nbVlans 4 } nbVlansNewVlanIdMode OBJECT-TYPE SYNTAX INTEGER { other (1), enableAddVlanWithoutId (2) } ACCESS read-only STATUS mandatory DESCRIPTION "If GET responce is 2=enableAddVlanWithoutId, the Agent has a possiblity to Create the new ISVLAN entry without setting entry Id. It will prevent conflicts when IGMP,GVRP and ISVLAN protocols will work simultaneously." ::= { nbVlans 5 } nbVlansSaveMode OBJECT-TYPE SYNTAX INTEGER { other (1), allVlansConfig (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Save Vlans RUN configuration in the NVRAM. In case of GET command - always responds with 1=other. In case of SET command - always needs 2=allVlansConfig." ::= { nbVlans 6 } nbVlansDevEtherType OBJECT-TYPE SYNTAX INTEGER { notSupported (1), supported (2) } ACCESS read-only STATUS mandatory DESCRIPTION "Device Ethernet Type supported." ::= { nbVlans 7 } nbVlansMacLimitSaveCfg OBJECT-TYPE SYNTAX INTEGER { other (1), allPortMacLimit (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Save Port's Mac Limit RUN configuration in the NVRAM. In case of GET command - always responds with 1=other. In case of SET command - always needs 2=allPortMacLimit." ::= { nbVlans 8 } ------------------------------------------------------------------------------ -- TRAPS ------------------------------------------------------------------------------ portMacLimitExceeded TRAP-TYPE ENTERPRISE nbVlans VARIABLES { nbVlansRunPortMacLimitPortNumber, nbVlansRunPortMacLimitValue, nbVlansRunPortMacLimitActionDescription } DESCRIPTION "The SNMP trap that is generated when the Maximum number of MAC Addresses for the Port is exceeded." ::= 32 END