--  =======================================================================
--  File        : osProvBins.mib
--  Description : Private MIB support the functionality of measurement bins
--  By          : Inna

-- Copyright (c) 2008 MRV.  All Rights Reserved.
--
--
-- Reproduction of this document is authorized on condition that this
-- copyright notice is included.  This MRV SNMP MIB Specification
-- embodies MRV's proprietary intellectual property.  MRV
-- retains all title and ownership in the specification, including any
-- revisions.
--
-- It is MRV's intent to encourage the widespread use of this
-- specification in connection with the management of MRV's
-- products. MRV grants vendor, end-users, and other interested
-- parties a non-exclusive license to use this specification in
-- connection with the management of MRV's products.
--
-- This specification is supplied "AS IS," and MRV makes no
-- warranty, either express or implied, as to the use, operation,
-- condition, or performance of the specification.
--
-- Copyright text courtesy of MRV
--
-- If you have any questions about this MIB, please call MRV
-- Technical Support Center at 1-800-858-7815 from inside USA or
-- 1-818-773-0900 from outside USA.
--
--
-- MRV retains the right to change this MIB without notification.

OS-PROV-BINS-MIB DEFINITIONS ::= BEGIN

        IMPORTS
                MODULE-IDENTITY, OBJECT-TYPE,
                Unsigned32, Gauge32                           FROM SNMPv2-SMI
                TEXTUAL-CONVENTION,            
                DateAndTime                                   FROM SNMPv2-TC
                osEthServ, osEthServId, osEthServFlowId       FROM OS-ETH-SERV-MIB
                EntityName, EntryValidator, ProfileStatus     FROM OS-COMMON-TC-MIB

                MODULE-COMPLIANCE, OBJECT-GROUP               FROM SNMPv2-CONF;

osProvBins   MODULE-IDENTITY
                LAST-UPDATED "201104110000Z"
                ORGANIZATION "MRV Communications, Inc."
                CONTACT-INFO
                   "Alex Rozin
                    MRV Communication, Inc
                    http://www.mrv.com
                    Email:  ARozin@mrv.com"
                DESCRIPTION
                    "Functionality of bins."

                REVISION     "201104110000Z"
                DESCRIPTION
                  "New object osProvBinSetCurrStatsHistIndex was added."

                REVISION     "201012160000Z"
                DESCRIPTION
                    "Initial edition."
                ::= { osEthServ 20 }

-- ************************************************************
-- MIB place Definition
-- ************************************************************
osProvBinsGen               OBJECT IDENTIFIER ::= { osProvBins 1 }
osProvBinsConformance       OBJECT IDENTIFIER ::= { osProvBins 100 }
osProvBinsMIBCompliances    OBJECT IDENTIFIER ::= { osProvBinsConformance 1 }
osProvBinsMIBGroups         OBJECT IDENTIFIER ::= { osProvBinsConformance 2 }

--3456789a123456789b123456789c123456789d123456789e123456789f123456789g123456789
-- ************************************************************
-- Textual converions
-- ************************************************************

MeasTestType ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
      "This enumeration data type is used to distinguish between types of of tests."
     SYNTAX      INTEGER {
                  dmm(1) -- for future: , rfc254492)
                }


MeasTestResultType ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
       "This enumeration data type is used to distinguish between 
        measurement bins for different test result variation.
        Is was stolen from MefSoamTcDelayMeasurementBinType of MEF-SOAM-PM-MIB."
    SYNTAX      INTEGER {
                  roundTripFrameDelay(1),
                  forwardFrameDelay(2),  -- For future
                  backwardFrameDelay(3), -- For future
                  roundTripIFDV(4),      -- jitter
                  forwardIFDV(5),        -- SDJitter
                  backwardIFDV(6)        -- DSJitter
                }



--3456789a123456789b123456789c123456789d123456789e123456789f123456789g123456789

osProvBinsSupported OBJECT-TYPE
    SYNTAX          INTEGER { notSupported(1), supported(2) }
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
      "Indicates that this MIB is supported."
    ::= { osProvBinsGen 1 }


-- ************************************************************
-- The osProvBinPrflTable 
-- ************************************************************
osProvBinPrflTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF OsProvBinPrflEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
       "Bins profile table"
    ::= { osProvBins 2 }

osProvBinPrflEntry    OBJECT-TYPE
    SYNTAX          OsProvBinPrflEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
       "Contains an entry of the table."
    INDEX { osProvBinPrflId }
    ::= { osProvBinPrflTable 1 }

OsProvBinPrflEntry ::= SEQUENCE {
      osProvBinPrflId            EntityName,
      osProvBinPrflBinsNumber    Unsigned32,
      osProvBinPrflAdminStatus   EntryValidator,
      osProvBinPrflOperStatus    ProfileStatus
}

osProvBinPrflId         OBJECT-TYPE
    SYNTAX          EntityName
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
       "Bins profile name."
    ::= { osProvBinPrflEntry 1 }

osProvBinPrflBinsNumber   OBJECT-TYPE
    SYNTAX          Unsigned32 (1..10)
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
       "A SOAM implementation must support a configurable 
        number of bins per bin collection interval."
    REFERENCE
       "[MEF SOAM-PM] P17, D6, P18, D7, P19, D8, P20, D9"
    DEFVAL { 1 }
    ::= { osProvBinPrflEntry 2 }


osProvBinPrflAdminStatus OBJECT-TYPE
    SYNTAX          EntryValidator
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
       "Allows to create new rows or delete old rows"
    ::= { osProvBinPrflEntry 98 }

osProvBinPrflOperStatus  OBJECT-TYPE
    SYNTAX          ProfileStatus
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
       "."
    ::= { osProvBinPrflEntry 99 }

-- ************************************************************
-- The osProvBinCfgTable 
-- ************************************************************
osProvBinCfgTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF OsProvBinCfgEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
       "Bin configuration table"
    ::= { osProvBins 3 }

osProvBinCfgEntry    OBJECT-TYPE
    SYNTAX          OsProvBinCfgEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
       "Contains an entry of the table."
    INDEX { osProvBinPrflId, osProvBinCfgBinIndex }
    ::= { osProvBinCfgTable 1 }

OsProvBinCfgEntry ::= SEQUENCE {
      osProvBinCfgBinIndex    Unsigned32,
      osProvBinCfgBinBound    Unsigned32
}

osProvBinCfgBinIndex OBJECT-TYPE
    SYNTAX          Unsigned32 (1..10)
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
       "Bin index."
    ::= { osProvBinCfgEntry 1 }

osProvBinCfgBinBound   OBJECT-TYPE
    SYNTAX          Unsigned32 (0..5000000)
    UNITS           "microseconds (us)"
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
       "This attribute specifies the lower boundary for a 
        bin. The upper boundary is defined by the next bin
        value or infinite for the last bin defined.
        The boundary for each bin must 
        be larger than the boundary of the preceding 
        bin. By default, the next bin is set to 5000us larger 
        than the lower bin boundary. 

        The values in a bin boundary object represents the time range 
        used to segregate delay data into the appropriate statistical
        data bin. For five bins with default values, each bin has the 
        following time range:

        bin 1 =     0,  represents a range is 0u <= measurement < 5,000us
        bin 2 =  5000, represents a range is 5,000us <= measurement < 10,000us
        bin 3 = 10000, represents a range is 10,000us <= measurement < 15,000us
        bin 4 = 15000, represents a range is 15,000us <= measurement < 20,000us
        bin 5 = 20000, represents a range is 20,000us <= measurement < infinity

        The values in a bin boundary object represents the time range 
        used to segregate delay data into the appropriate statistical
        data bin. The first bin boundary always contains 
        the value of 0. Attempting to write a non-zero value to this bin will 
        result in an error.
        
        Note that the upper limit of the range for the last measurement 
        bin is effectively 5 seconds (or 5,000,000 us).
       "
    REFERENCE
       "[MEF SOAM-PM] P10"
    ::= { osProvBinCfgEntry 2 }

-- ************************************************************
-- The osProvBinBindTable
-- ************************************************************
osProvBinBindTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF OsProvBinBindEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "Allows to bind the bins configuration to a service/flow."
    ::= { osProvBins 4 }

osProvBinBindEntry    OBJECT-TYPE
    SYNTAX      OsProvBinBindEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "Contains an entry of the table."
    INDEX { osEthServId, osEthServFlowId, osProvBinBindTestType, osProvBinBindResultType }
    ::= { osProvBinBindTable 1 }

OsProvBinBindEntry ::= SEQUENCE {
    osProvBinBindTestType        MeasTestType,    
    osProvBinBindResultType      MeasTestResultType,
    osProvBinBindPrflId          EntityName,
    osProvBinBindAdminStatus     EntryValidator
}

osProvBinBindTestType OBJECT-TYPE
    SYNTAX          MeasTestType
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
       "Test type."
    ::= { osProvBinBindEntry 1 }

osProvBinBindResultType OBJECT-TYPE
    SYNTAX          MeasTestResultType
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
       "Test result type."
    ::= { osProvBinBindEntry 2 }

osProvBinBindPrflId OBJECT-TYPE
    SYNTAX          EntityName
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
       "Bound Bins profile name."
    ::= { osProvBinBindEntry 3 }

osProvBinBindAdminStatus OBJECT-TYPE
    SYNTAX          EntryValidator
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
       "Binding is enable."
    ::= { osProvBinBindEntry 4 }

-- ************************************************************
-- R E S U L T S
-- ************************************************************

-- ************************************************************
-- The osProvBinSetCurrStatsTable
-- ************************************************************
osProvBinSetCurrStatsTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF OsProvBinSetCurrStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
      "This table contains the result bins for the current bin-collection
       interval in one session."
    ::= { osProvBins 5 }

osProvBinSetCurrStatsEntry    OBJECT-TYPE
    SYNTAX      OsProvBinSetCurrStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "Contains an entry of the table."
    INDEX { osEthServId, osEthServFlowId, osProvBinBindTestType }
    ::= { osProvBinSetCurrStatsTable 1 }

OsProvBinSetCurrStatsEntry ::= SEQUENCE {
    osProvBinSetCurrStatsStart      DateAndTime,
    osProvBinSetCurrStatsHistIndex  Unsigned32 
}

osProvBinSetCurrStatsStart  OBJECT-TYPE
    SYNTAX      DateAndTime
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
      "."
    ::= { osProvBinSetCurrStatsEntry 1 }
    
osProvBinSetCurrStatsHistIndex  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
      "The index will be used as history index of the bin-set."
    ::= { osProvBinSetCurrStatsEntry 2 }


-- ************************************************************
-- The osProvBinSetHistStatsTable
-- ************************************************************
osProvBinSetHistStatsTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF OsProvBinSetHistStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "This table contains the result bins for the historic bin-collection
        intervals in one session."
    ::= { osProvBins 6 }

osProvBinSetHistStatsEntry    OBJECT-TYPE
    SYNTAX      OsProvBinSetHistStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "Contains an entry of the table."
    INDEX { osEthServId, osEthServFlowId, osProvBinBindTestType, osProvBinSetHistIndex }
    ::= { osProvBinSetHistStatsTable 1 }

OsProvBinSetHistStatsEntry ::= SEQUENCE {
    osProvBinSetHistIndex              Unsigned32,
    osProvBinSetHistStatsStart         DateAndTime,
    osProvBinSetHistStatsFinish        DateAndTime
}

osProvBinSetHistIndex OBJECT-TYPE
    SYNTAX          Unsigned32 (1..4294967295)
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
       "An implementation MUST start assigning
        osProvBinSetHistIndex values at 1 and wrap after
        exceeding the maximum possible value as defined by
        the limit of this object (4294967295)."
    ::= { osProvBinSetHistStatsEntry 1 }

osProvBinSetHistStatsStart OBJECT-TYPE
    SYNTAX      DateAndTime
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
      "."
    ::= { osProvBinSetHistStatsEntry 2 }

osProvBinSetHistStatsFinish OBJECT-TYPE
    SYNTAX      DateAndTime
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
      "."
    ::= { osProvBinSetHistStatsEntry 3 }

-- ************************************************************
-- The osProvBinCurrStatsTable
-- ************************************************************
osProvBinCurrStatsTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF OsProvBinCurrStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
      "This table contains the result bins for the current bin-collection
       interval in one session."
    ::= { osProvBins 7 }

osProvBinCurrStatsEntry    OBJECT-TYPE
    SYNTAX      OsProvBinCurrStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "Contains an entry of the table."
    INDEX { osEthServId, osEthServFlowId, osProvBinBindTestType, osProvBinBindResultType, osProvBinCfgBinIndex }
    ::= { osProvBinCurrStatsTable 1 }

OsProvBinCurrStatsEntry ::= SEQUENCE {
    osProvBinCurrStatsCounter    Gauge32
}

osProvBinCurrStatsCounter OBJECT-TYPE
    SYNTAX      Gauge32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "This attribute contains the count of the number of completed
             measurements initiated in this bin-collection interval whose value
             falls within the range specified for this bin (that is, greater
             than or equal to the boundary for the bin, and
             (unless the bin is the last bin) less than the
             boundary for the following bin.
            "
    REFERENCE
       "MEF SOAM-PM-MIB mefSoamDmCurrStatsBinsCounter."
    ::= { osProvBinCurrStatsEntry 1 }

-- ************************************************************
-- The osProvBinHistStatsTable
-- ************************************************************
osProvBinHistStatsTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF OsProvBinHistStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "This table contains the result bins for the historic bin-collection
        intervals in one session."
    ::= { osProvBins 8 }

osProvBinHistStatsEntry    OBJECT-TYPE
    SYNTAX      OsProvBinHistStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "Contains an entry of the table."
    INDEX { osEthServId, osEthServFlowId, osProvBinBindTestType, osProvBinSetHistIndex, osProvBinBindResultType, osProvBinCfgBinIndex }
    ::= { osProvBinHistStatsTable 1 }

OsProvBinHistStatsEntry ::= SEQUENCE {
    osProvBinHistStatsCounter       Gauge32
}

osProvBinHistStatsCounter OBJECT-TYPE
    SYNTAX      Gauge32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "This attribute contains the count of the number of completed
             measurements initiated in this measurement interval whose value
             falls within the range specified for this bin (that is, greater
             than or equal to the boundary for the bin, and
             (unless the bin is the last bin) less than the
             boundary for the following bin.
            "
    REFERENCE
       "MEF SOAM-PM-MIB mefSoamDmCurrStatsBinsCounter."
    ::= { osProvBinHistStatsEntry 1 }

-- *******************************************************************
--  Conformance Information 
-- ******************************************************************* 

osProvBinsMIBCompliance MODULE-COMPLIANCE
    STATUS current
    DESCRIPTION
        "The core compliance statement for all the implementations." 

    MODULE -- this module 
        MANDATORY-GROUPS { 
                          osProvBinsMandatoryGroup
                         }

    ::= { osProvBinsMIBCompliances 1 }

-- ...................................................................
-- Conformance Groups 
-- ................................................................... 
 
osProvBinsMandatoryGroup  OBJECT-GROUP
    OBJECTS { 
               osProvBinsSupported,
               osProvBinPrflBinsNumber, osProvBinPrflAdminStatus, osProvBinPrflOperStatus,
               osProvBinCfgBinBound,
               osProvBinBindPrflId, osProvBinBindAdminStatus,
               osProvBinCurrStatsCounter, osProvBinSetCurrStatsStart, osProvBinSetCurrStatsHistIndex,
               osProvBinHistStatsCounter, osProvBinSetHistStatsStart, osProvBinSetHistStatsFinish
            }
    STATUS current 
    DESCRIPTION 
        "."

    ::= { osProvBinsMIBGroups 1 }


END