-- ======================================================================= -- File : osDot1ag.mib -- Description : Private MIB providing dot1ag -- By : Alex -- Copyright (c) 2008 MRV. All Rights Reserved. -- -- -- Reproduction of this document is authorized on condition that this -- copyright notice is included. This MRV SNMP MIB Specification -- embodies MRV's proprietary intellectual property. MRV -- retains all title and ownership in the specification, including any -- revisions. -- -- It is MRV's intent to encourage the widespread use of this -- specification in connection with the management of MRV's -- products. MRV grants vendor, end-users, and other interested -- parties a non-exclusive license to use this specification in -- connection with the management of MRV's products. -- -- This specification is supplied "AS IS," and MRV makes no -- warranty, either express or implied, as to the use, operation, -- condition, or performance of the specification. -- -- Copyright text courtesy of MRV -- -- If you have any questions about this MIB, please call MRV -- Technical Support Center at 1-800-858-7815 from inside USA or -- 1-818-773-0900 from outside USA. -- -- -- MRV retains the right to change this MIB without notification. OS-DOT1AG-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, Counter32 FROM SNMPv2-SMI MacAddress, TimeStamp, TimeInterval, TruthValue FROM SNMPv2-TC nbSwitchG1Il FROM OS-COMMON-TC-MIB VlanIdOrNone, Dot1agCfmPortStatus, Dot1agCfmInterfaceStatus, Dot1agCfmFngState, Dot1agCfmMepId, Dot1agCfmHighestDefectPri, Dot1agCfmMaintAssocNameType, Dot1agCfmMaintAssocName, Dot1agCfmLowestAlarmPri, Dot1agCfmCcmInterval, Dot1agCfmMpDirection, Dot1agCfmMepDefects, Dot1agCfmRemoteMepState FROM IEEE8021-CFM-MIB MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF InterfaceIndex FROM IF-MIB -- [RFC2863] osEthOamMdLevel FROM OS-ETHOAM-MD-MIB TagList, PortList, EntryValidator FROM OS-COMMON-TC-MIB; osDot1ag MODULE-IDENTITY LAST-UPDATED "201812300000Z" -- 30 Dec. 2018 ORGANIZATION "MRV Communications, Inc." CONTACT-INFO "Alex Rozin MRV Communication, Inc http://www.mrv.com Email: ARozin@mrv.com" DESCRIPTION "This MIB is used to configure and monitor 802.1ag management entities for CCM." REVISION "201812300000Z" -- 30 Dec. 2018 DESCRIPTION "Import fro general OS-COMMON-TC-MIB" REVISION "201305140000Z" -- 14 may 2013 DESCRIPTION "Initial version." ::= { nbSwitchG1Il 22 } -- ************************************************************ -- MIB place Definition -- ************************************************************ osDot1agObjects OBJECT IDENTIFIER ::= { osDot1ag 1 } osDot1agConformance OBJECT IDENTIFIER ::= { osDot1ag 100 } osDot1agMIBCompliances OBJECT IDENTIFIER ::= { osDot1agConformance 1 } osDot1agMIBGroups OBJECT IDENTIFIER ::= { osDot1agConformance 2 } osDot1agGen OBJECT IDENTIFIER ::= { osDot1agObjects 1 } -- ************************************************************ -- Textual converions -- ************************************************************ --3456789a123456789b123456789c123456789d123456789e123456789f123456789g123456789 -- ************************************************************ -- Genaral configurations -- ************************************************************ osDot1agGenCcmIntervals OBJECT-TYPE SYNTAX BITS { osDot1agGenSupports300Hz (0), -- 3 1/3 millisecond osDot1agGenSupports10ms (1), -- 10 millisecond osDot1agGenSupports100ms (2), -- 100 millisecond osDot1agGenSupports1s (3), -- 1 second - default osDot1agGenSupports10s (4), -- 10 seconds osDot1agGenSupports60s (5), -- 1 minute osDot1agGenSupports600s (6) -- 10 minutes } MAX-ACCESS read-only STATUS current DESCRIPTION "Supported values of osDot1agMaCcmInterval. Additionally this object serves to indicate whether this MIB is supported by agent." ::= { osDot1agGen 1 } osDot1agGenKeepAlive OBJECT-TYPE SYNTAX Unsigned32 (3..12) MAX-ACCESS read-write STATUS current DESCRIPTION "CCM keep alive limit. The RMEP fault is detected after timeout with this value plus 0.5. The units of this parameter depend osDot1agMaCcmInterval. For exaample, if osDot1agMaCcmInterval=interval1s, then the value osDot1agGenKeepAlive=4 means keep alive timeout 4.5 seconds. Another example: osDot1agMaCcmInterval=interval100ms and osDot1agGenKeepAlive=3 mean keep alive timeout 350ms" REFERENCE "CLI command 'ccm-keep-alive-number ...'." DEFVAL { 3 } ::= { osDot1agGen 2 } osDot1agGenAdminStatus OBJECT-TYPE SYNTAX INTEGER { unknown (1), enable (2), disable (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Administratively assigned state of 802.1ag engine." REFERENCE "CLI command 'ethernet oam enable'." DEFVAL { disable } ::= { osDot1agGen 3 } osDot1agGenDmmStatus OBJECT-TYPE SYNTAX INTEGER { unknown (1), enable (2), disable (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Administratively assigned generic loopback state of rfc2544 DMM test engine." REFERENCE "CLI command 'ethernet oam generic-loopback-mode enable'." DEFVAL { disable } ::= { osDot1agGen 4 } -- ************************************************************ -- The osDot1agMdTable Table see instead osEthOamMdTable in osEthOamMd.mib -- ************************************************************ -- ************************************************************ -- The osDot1agMaTable Table -- ************************************************************ osDot1agMaTable OBJECT-TYPE SYNTAX SEQUENCE OF OsDot1agMaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table allows to configure Maintenance Associations." ::= { osDot1agObjects 2 } osDot1agMaEntry OBJECT-TYPE SYNTAX OsDot1agMaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Contains an entry of the table." INDEX { osEthOamMdLevel, osDot1agMaIndex } ::= { osDot1agMaTable 1 } OsDot1agMaEntry ::= SEQUENCE { osDot1agMaIndex Unsigned32, osDot1agMaVlans TagList, -- vlans LIST-OF-VIDS osDot1agMaPrimaryVlanId VlanIdOrNone, -- primary-vlan <1-4095>" osDot1agMaOperPrimaryVlanId VlanIdOrNone, -- primary-vlan <1-4095>" osDot1agMaFormatName Dot1agCfmMaintAssocNameType, -- name ... osDot1agMaName Dot1agCfmMaintAssocName, -- name ... osDot1agMaCcmInterval Dot1agCfmCcmInterval, -- ccm-interval ... osDot1agMaRMepAging Unsigned32, -- remote-meps aging <0-86400> osDot1agMaRMeps TagList, -- remote-meps (all|LIST-OF-MEPS) osDot1agMaIgnoreRMeps TagList, -- ignore-rmeps (all|LIST-OF-MEPS) osDot1agMaCPorts PortList, -- c-ports PORTS-GROUP osDot1agMaKeepAlive Unsigned32, -- ccm-keep-alive-number <3-12> osDot1agMaCcmClear TruthValue, -- ccm-clear osDot1agMaAdminSatus EntryValidator } osDot1agMaIndex OBJECT-TYPE SYNTAX Unsigned32(1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of the MA table." ::= { osDot1agMaEntry 1 } osDot1agMaVlans OBJECT-TYPE SYNTAX TagList MAX-ACCESS read-create STATUS current DESCRIPTION "CLI command 'vlans LIST-OF-VIDS'" DEFVAL { "" } ::= { osDot1agMaEntry 2 } osDot1agMaPrimaryVlanId OBJECT-TYPE SYNTAX VlanIdOrNone MAX-ACCESS read-create STATUS current DESCRIPTION "Administratively assigned primary VLAN for the MA. If the value equals to 0, then osDot1agMaOperPrimaryVlanId is selected as first item from osDot1agMaVlans. osDot1agMaPrimaryVlanId cannot be reassigned if osDot1agMaFormatName equals to primaryVid(1). CLI command primary-vlan <1-4095>" DEFVAL { 0 } ::= { osDot1agMaEntry 3 } osDot1agMaOperPrimaryVlanId OBJECT-TYPE SYNTAX VlanIdOrNone MAX-ACCESS read-only STATUS current DESCRIPTION "The current operational state of the primary VLAN." ::= { osDot1agMaEntry 4 } osDot1agMaFormatName OBJECT-TYPE SYNTAX Dot1agCfmMaintAssocNameType MAX-ACCESS read-create STATUS current DESCRIPTION "CLI command name ..." DEFVAL { unsignedInt16 } ::= { osDot1agMaEntry 5 } osDot1agMaName OBJECT-TYPE SYNTAX Dot1agCfmMaintAssocName MAX-ACCESS read-create STATUS current DESCRIPTION "CLI command name ... Default equals to osDot1agMaIndex" ::= { osDot1agMaEntry 6 } osDot1agMaCcmInterval OBJECT-TYPE SYNTAX Dot1agCfmCcmInterval MAX-ACCESS read-create STATUS current DESCRIPTION "CLI command: ccm-interval ..." DEFVAL { interval1s } ::= { osDot1agMaEntry 7 } osDot1agMaRMepAging OBJECT-TYPE SYNTAX Unsigned32 (0..86400) MAX-ACCESS read-create STATUS current DESCRIPTION "CLI command: remote-meps aging <0-86400>. The value 0 means 'no aging'." DEFVAL { 0 } ::= { osDot1agMaEntry 8 } osDot1agMaRMeps OBJECT-TYPE SYNTAX TagList MAX-ACCESS read-create STATUS current DESCRIPTION "CLI command: remote-meps (all|LIST-OF-MEPS)" DEFVAL { "" } ::= { osDot1agMaEntry 9 } osDot1agMaIgnoreRMeps OBJECT-TYPE SYNTAX TagList MAX-ACCESS read-create STATUS current DESCRIPTION "CLI command: ignore-rmeps (all|LIST-OF-MEPS)" DEFVAL { "" } ::= { osDot1agMaEntry 10 } osDot1agMaCPorts OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-create STATUS current DESCRIPTION "CLI command: c-ports PORTS-GROUP" DEFVAL { "" } ::= { osDot1agMaEntry 11 } osDot1agMaKeepAlive OBJECT-TYPE SYNTAX Unsigned32 (3..12) MAX-ACCESS read-create STATUS current DESCRIPTION "CLI command: ccm-keep-alive-number <3-12>" DEFVAL { 3 } ::= { osDot1agMaEntry 12 } osDot1agMaCcmClear OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "CLI command: ccm-clear." DEFVAL { false } ::= { osDot1agMaEntry 60 } osDot1agMaAdminSatus OBJECT-TYPE SYNTAX EntryValidator MAX-ACCESS read-create STATUS current DESCRIPTION "." ::= { osDot1agMaEntry 99 } -- ************************************************************ -- The osDot1agMepTable -- ************************************************************ osDot1agMepTable OBJECT-TYPE SYNTAX SEQUENCE OF OsDot1agMepEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to manage Maintenance End Points." ::= { osDot1agObjects 3 } osDot1agMepEntry OBJECT-TYPE SYNTAX OsDot1agMepEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Contains an entry of the table." INDEX { osEthOamMdLevel, osDot1agMaIndex, osDot1agMepId } ::= { osDot1agMepTable 1 } OsDot1agMepEntry ::= SEQUENCE { osDot1agMepId Dot1agCfmMepId, osDot1agMepIfIndex InterfaceIndex, osDot1agMepDirection Dot1agCfmMpDirection, osDot1agMepPrimaryVlanId VlanIdOrNone, -- ... primary-vlan <1-4095>" osDot1agMepActive TruthValue, -- ... activate osDot1agMepCciEnabled TruthValue, -- ... ccm-activate osDot1agMepLowPrDef Dot1agCfmLowestAlarmPri, -- ... lowest-alarm-prio osDot1agMepFngAlarmTime TimeInterval, -- ... fng-alarm-time osDot1agMepFngResetTime TimeInterval, -- ... fng-reset-time osDot1agMepPriority Unsigned32, -- ... priority osDot1agMepCcmAlarms INTEGER, -- ... ccm-alarms osDot1agMepSendPortTlv TruthValue, -- ... send-port-tlv osDot1agMepSendIfTlv TruthValue, -- ... send-interface-tlv osDot1agMepCcmClear TruthValue, -- ... clear-ccm-statistics -- read-only results and statistics. osDot1agMepFngState Dot1agCfmFngState, osDot1agMepMacAddress MacAddress, osDot1agMepHighestPrDefect Dot1agCfmHighestDefectPri, osDot1agMepDefects Dot1agCfmMepDefects, osDot1agMepCciSentCcms Counter32, osDot1agMepCciRecvCcms Counter32, osDot1agMepAdminSatus EntryValidator } osDot1agMepId OBJECT-TYPE SYNTAX Dot1agCfmMepId MAX-ACCESS not-accessible STATUS current DESCRIPTION "Integer that is unique among all the MEPs in the same MA. Other definition is: a small integer, unique over a given Maintenance Association, identifying a specific Maintenance association End Point (3.19)." REFERENCE "802.1ag clauses 3.19, 19.2 and 12.14.7" ::= { osDot1agMepEntry 1 } osDot1agMepIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-create STATUS current DESCRIPTION "This object is the interface index of the interface either a bridge port, or an aggregated IEEE 802.1 link within a bridge port, to which the MEP is attached." REFERENCE "802.1ag clause 12.14.7.1.3:b" ::= { osDot1agMepEntry 2 } osDot1agMepDirection OBJECT-TYPE SYNTAX Dot1agCfmMpDirection MAX-ACCESS read-create STATUS current DESCRIPTION "The direction in which the MEP faces on the Bridge port. down(1) Sends Continuity Check Messages away from the MAC Relay Entity. Also know as 'outward'. up(2) Sends Continuity Check Messages towards the MAC Relay Entity. Also know as 'inward'." REFERENCE "802.1ag clauses 12.14.6.3.2:c" DEFVAL { up } ::= { osDot1agMepEntry 3 } osDot1agMepPrimaryVlanId OBJECT-TYPE SYNTAX VlanIdOrNone MAX-ACCESS read-create STATUS current DESCRIPTION "CLI command: mep <1-4095> primary-vlan <1-4095>" DEFVAL { 0 } ::= { osDot1agMepEntry 4 } osDot1agMepActive OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "CLI command: mep <1-4095> activate" DEFVAL { false } ::= { osDot1agMepEntry 5 } osDot1agMepCciEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "CLI command: mep <1-4095> ccm-activate" DEFVAL { false } ::= { osDot1agMepEntry 6 } osDot1agMepLowPrDef OBJECT-TYPE SYNTAX Dot1agCfmLowestAlarmPri MAX-ACCESS read-create STATUS current DESCRIPTION "CLI command: mep <1-4095> lowest-alarm-prio" REFERENCE "802.1ag clause 12.14.7.1.3:k and 20.9.5 and Table 20-1" DEFVAL { macRemErrXcon } ::= { osDot1agMepEntry 7 } osDot1agMepFngAlarmTime OBJECT-TYPE SYNTAX TimeInterval MAX-ACCESS read-create STATUS current DESCRIPTION "CLI command: mep <1-4095> fng-alarm-time" REFERENCE "802.1ag clauses 12.14.7.1.3:l and 20.33.3" DEFVAL { 250 } ::= { osDot1agMepEntry 8 } osDot1agMepFngResetTime OBJECT-TYPE SYNTAX TimeInterval MAX-ACCESS read-create STATUS current DESCRIPTION "CLI command: mep <1-4095> fng-reset-time" DEFVAL { 1000 } ::= { osDot1agMepEntry 9 } osDot1agMepPriority OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-create STATUS current DESCRIPTION "CLI command: mep <1-4095> priority" DEFVAL { 0 } ::= { osDot1agMepEntry 10 } osDot1agMepCcmAlarms OBJECT-TYPE SYNTAX INTEGER { all (1), fault (2), recovery (3) } MAX-ACCESS read-create STATUS current DESCRIPTION "CLI command: mep <1-4095> ccm-alarms all Send nbEthOamCcmAlarm when the MEP fails or recovers fault Send nbEthOamCcmAlarm when the MEP fails (default - no) recovery Send nbEthOamCcmAlarm when the MEP recovers (default - yes) " DEFVAL { all } ::= { osDot1agMepEntry 11 } osDot1agMepSendPortTlv OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "CLI command: mep <1-4095> send-port-tlv" DEFVAL { true } ::= { osDot1agMepEntry 12 } osDot1agMepSendIfTlv OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "CLI command: mep <1-4095> send-interface-tlv" DEFVAL { true } ::= { osDot1agMepEntry 13 } osDot1agMepCcmClear OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "CLI command: mep <1-4095> clear-ccm-statistics" DEFVAL { false } ::= { osDot1agMepEntry 14 } -- read-only results and statistics. osDot1agMepFngState OBJECT-TYPE SYNTAX Dot1agCfmFngState MAX-ACCESS read-only STATUS current DESCRIPTION "." ::= { osDot1agMepEntry 25 } osDot1agMepMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "." ::= { osDot1agMepEntry 26 } osDot1agMepHighestPrDefect OBJECT-TYPE SYNTAX Dot1agCfmHighestDefectPri MAX-ACCESS read-only STATUS current DESCRIPTION "." ::= { osDot1agMepEntry 27 } osDot1agMepDefects OBJECT-TYPE SYNTAX Dot1agCfmMepDefects MAX-ACCESS read-only STATUS current DESCRIPTION "." ::= { osDot1agMepEntry 28 } osDot1agMepCciSentCcms OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "." ::= { osDot1agMepEntry 29 } osDot1agMepCciRecvCcms OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of Continuity Check messages transmitted." REFERENCE "802.1ag clauses 12.14.7.1.3:w and 20.10.2" ::= { osDot1agMepEntry 30 } osDot1agMepAdminSatus OBJECT-TYPE SYNTAX EntryValidator MAX-ACCESS read-create STATUS current DESCRIPTION "Total number of Continuity Check messages received from all remote MEPs." ::= { osDot1agMepEntry 99 } -- ************************************************************ -- The osDot1agRMepTable -- ************************************************************ osDot1agRMepTable OBJECT-TYPE SYNTAX SEQUENCE OF OsDot1agRMepEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MEP Database. A database, maintained by every MEP, that maintains received information about other MEPs in the Maintenance Domain." REFERENCE "802.1ag clause 19.2.15" ::= { osDot1agObjects 4 } osDot1agRMepEntry OBJECT-TYPE SYNTAX OsDot1agRMepEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MEP Database table entry." INDEX { osEthOamMdLevel, osDot1agMaIndex, osDot1agMepId, osDot1agRMepId } ::= { osDot1agRMepTable 1 } OsDot1agRMepEntry ::= SEQUENCE { osDot1agRMepId Dot1agCfmMepId, osDot1agRMepState Dot1agCfmRemoteMepState, osDot1agRMepFailedOkTime TimeStamp, osDot1agRMepMacAddress MacAddress, osDot1agRMepRdi TruthValue, osDot1agRMepPortStatusTlv Dot1agCfmPortStatus, osDot1agRMepInterfaceStatusTlv Dot1agCfmInterfaceStatus, osDot1agRMepRecvCcms Counter32 } osDot1agRMepId OBJECT-TYPE SYNTAX Dot1agCfmMepId MAX-ACCESS not-accessible STATUS current DESCRIPTION "Maintenance association End Point Identifier of a remote MEP whose information from the MEP Database is to be returned. " REFERENCE "802.1ag clause 12.14.7.6.2:b" ::= { osDot1agRMepEntry 1 } osDot1agRMepState OBJECT-TYPE SYNTAX Dot1agCfmRemoteMepState MAX-ACCESS read-only STATUS current DESCRIPTION "The operational state of the remote MEP IFF State machines." REFERENCE "802.1ag clause 12.14.7.6.3:b and 20.22" ::= { osDot1agRMepEntry 2} osDot1agRMepFailedOkTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The time (SysUpTime) at which the IFF Remote MEP state machine last entered either the RMEP_FAILED or RMEP_OK state. " REFERENCE "802.1ag clause 12.14.7.6.3:c" ::= { osDot1agRMepEntry 3 } osDot1agRMepMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The MAC address of the remote MEP." REFERENCE "802.1ag clause 12.14.7.6.3:d and 20.19.7" ::= { osDot1agRMepEntry 4 } osDot1agRMepRdi OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "State of the RDI bit in the last received CCM (true for RDI=1), or false if none has been received. " REFERENCE "802.1ag clauses 12.14.7.6.3:e and 20.19.2" ::= { osDot1agRMepEntry 5 } osDot1agRMepPortStatusTlv OBJECT-TYPE SYNTAX Dot1agCfmPortStatus MAX-ACCESS read-only STATUS current DESCRIPTION "An enumerated value of the Port status TLV received in the last CCM from the remote MEP or the default value psNoPortStateTLV indicating either no CCM has been received, or that nor port status TLV was received in the last CCM. " REFERENCE "802.1ag clause 12.14.7.6.3:f and 20.19.3" DEFVAL { psNoPortStateTLV } ::= { osDot1agRMepEntry 6} osDot1agRMepInterfaceStatusTlv OBJECT-TYPE SYNTAX Dot1agCfmInterfaceStatus MAX-ACCESS read-only STATUS current DESCRIPTION "An enumerated value of the Interface status TLV received in the last CCM from the remote MEP or the default value isNoInterfaceStatus TLV indicating either no CCM has been received, or that no interface status TLV was received in the last CCM. " REFERENCE "802.1ag clause 12.14.7.6.3:g and 20.19.4" DEFVAL { isNoInterfaceStatusTLV } ::= { osDot1agRMepEntry 7} osDot1agRMepRecvCcms OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of Continuity Check messages received from this remote MEPs." ::= { osDot1agRMepEntry 8 } -- ******************************************************************* -- Conformance Information -- ******************************************************************* osDot1agMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The core compliance statement for all the implementations." MODULE -- this module MANDATORY-GROUPS { osDot1agMandatoryGroup } ::= { osDot1agMIBCompliances 1 } -- ................................................................... -- Conformance Groups -- ................................................................... osDot1agMandatoryGroup OBJECT-GROUP OBJECTS { osDot1agGenCcmIntervals, osDot1agGenKeepAlive, osDot1agGenAdminStatus, osDot1agGenDmmStatus, osDot1agMaVlans, osDot1agMaPrimaryVlanId, osDot1agMaOperPrimaryVlanId, osDot1agMaFormatName, osDot1agMaName, osDot1agMaCcmInterval, osDot1agMaRMepAging, osDot1agMaRMeps, osDot1agMaIgnoreRMeps, osDot1agMaCPorts, osDot1agMaKeepAlive, osDot1agMaCcmClear, osDot1agMaAdminSatus, osDot1agMepIfIndex, osDot1agMepDirection, osDot1agMepPrimaryVlanId, osDot1agMepActive, osDot1agMepCciEnabled, osDot1agMepLowPrDef, osDot1agMepFngAlarmTime, osDot1agMepFngResetTime, osDot1agMepPriority, osDot1agMepCcmAlarms, osDot1agMepSendPortTlv, osDot1agMepSendIfTlv, osDot1agMepCcmClear, osDot1agMepFngState, osDot1agMepMacAddress, osDot1agMepHighestPrDefect, osDot1agMepDefects, osDot1agMepCciSentCcms, osDot1agMepCciRecvCcms, osDot1agMepAdminSatus, osDot1agRMepState, osDot1agRMepFailedOkTime, osDot1agRMepMacAddress, osDot1agRMepRdi, osDot1agRMepPortStatusTlv, osDot1agRMepInterfaceStatusTlv, osDot1agRMepRecvCcms } STATUS current DESCRIPTION "." ::= { osDot1agMIBGroups 1 } END