-- ======================================================================= -- File : oaUpgrd.mib -- Description : Private MIB for Download/Upload software and configuration -- By : Yakov & Reuven -- Version : 0.2 -- Date : -- ======================================================================= -- -- -- Copyright (c) 2006 MRV. All Rights Reserved. -- -- -- Reproduction of this document is authorized on condition that this -- copyright notice is included. This MRV SNMP MIB Specification -- embodies MRV's proprietary intellectual property. MRV -- retains all title and ownership in the specification, including any -- revisions. -- -- It is MRV's intent to encourage the widespread use of this -- specification in connection with the management of MRV's -- products. MRV grants vendor, end-users, and other interested -- parties a non-exclusive license to use this specification in -- connection with the management of MRV's products. -- -- This specification is supplied "AS IS," and MRV makes no -- warranty, either express or implied, as to the use, operation, -- condition, or performance of the specification. -- -- Copyright text courtesy of MRV -- -- If you have any questions about this MIB, please call MRV -- Technical Support Center at 1-800-858-7815 from inside USA or -- 1-818-773-0900 from outside USA. -- -- -- MRV retains the right to change this MIB without notification. -- OA-DEV-UPGRADE-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, enterprises, NOTIFICATION-TYPE, Unsigned32 FROM SNMPv2-SMI -- RFC2578 MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF -- RFC2580 TEXTUAL-CONVENTION, DisplayString, DateAndTime FROM SNMPv2-TC -- RFC2579 nbSwitchG1Il FROM OS-COMMON-TC-MIB InetAddressType, InetAddress FROM INET-ADDRESS-MIB; -- RFC2851 -- RFC2851 oaDevUpgrade MODULE-IDENTITY LAST-UPDATED "201011250000Z" -- Nov 25, 2010 ORGANIZATION "MRV Communications, Inc." CONTACT-INFO "Yakov Vaisman MRV Communication, Inc http://www.mrv.com Email: yvaisman@mrv.com, Reuven Putter MRV Communication, Inc http://www.mrv.com Email: rputter@mrv.com" DESCRIPTION "Supports information for download/upload device software and/or configuration." -- Revision history REVISION "201011250000Z" -- Nov 25, 2010 DESCRIPTION "Revision 1.1 The following MIB objects are added: 1. oaAuditTable: oaAuditAdminStatus, oaAuditOperStatus, oaAuditChecksum, oaAuditChecksumTime, oaAuditValidChecksum, oaAuditValidChecksumTime, oaAuditLastError, 2. oaAuditScheduleParams: oaAuditScheduleStart, oaAuditSchedulePeriod, oaAuditScheduleStatus, oaAuditScheduleError, oaAuditMinSchedulePeriod " REVISION "201004260000Z" -- Apr 26, 2010 DESCRIPTION "Revision 1.0 New enumaration values are added for the following MIB objects 1. localFile for oaDevUpgrProtocolApp 2. removeLocalFile for oaDevUpgrAdminStatus 3. upgradeFpga for oaDevUpgrType - new row 4. downloadFpgaImageFailed for oaDevUpgrErrorStatus" REVISION "200904220000Z" -- Apr 22, 2009 DESCRIPTION "Revision 0.2: New enumaration values added to MIB Objects [oaDevUpgrType], [oaDevUpgrProtocolApp] and [oaDevUpgrErrorStatus] New [oaDevConfigAudit] Group of Objects added." REVISION "200611080000Z" -- Nov 8, 2006 DESCRIPTION "Initial edition [Revision 0.1]." ::= { nbDevGen 20 } -- ************************************************************ -- NBase Object Identifier Definition -- ************************************************************ -- GROUPS for General Device Configuration nbDeviceConfig OBJECT IDENTIFIER ::= { nbSwitchG1Il 11} nbDevGen OBJECT IDENTIFIER ::= { nbDeviceConfig 1 } oaDevUpgrNotifications OBJECT IDENTIFIER ::= { oaDevUpgrade 0 } oaDevUpgrConformance OBJECT IDENTIFIER ::= { oaDevUpgrade 101 } -- ************************************************************ -- Textual converions -- ************************************************************ PeriodicityDateAndTime ::= TEXTUAL-CONVENTION DISPLAY-HINT "2d-1d-1d,1d:1d,1d" STATUS current DESCRIPTION "A periodicity date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year 0..65536 (0 - for any periodicity except 'once') 2 3 month 0..12 (0 - for any periodicity except 'once') 3 4 day 0..31 (0 - for any periodicity except 'once' & 'everyMonth') 4 5 hour 0..23 (NA for periodicities 'everyXXHours' & 'everyXXMinutes') 5 6 minutes 0..59 6 7 day of Week 0..7 (0 - for any periodicity, except 'everyWeek'; 1-7 - for periodicity 'everyWeek') * Notes: - the value of year is in network-byte order For example, Tuesday May 26, 1992 at 1:30 PM EDT would be displayed as: 1992-5-26,13:30,0" SYNTAX OCTET STRING (SIZE (0 | 7)) -- ************************************************************ -- Objects in the Device's Upgrade Software/Configuration Group -- ************************************************************ oaDevUpgrGenSupport OBJECT-TYPE SYNTAX INTEGER { notSupported (1), supported (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Download/upload feature support." ::= { oaDevUpgrade 1 } -- ************************************************************ oaDevUpgrTable OBJECT-TYPE SYNTAX SEQUENCE OF OaDevUpgrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table configures download/upload operations: download software version, download/upload system configuration." ::= { oaDevUpgrade 2 } oaDevUpgrEntry OBJECT-TYPE SYNTAX OaDevUpgrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entries of the table." INDEX { oaDevUpgrType } ::= { oaDevUpgrTable 1 } OaDevUpgrEntry ::= SEQUENCE { oaDevUpgrType INTEGER, oaDevUpgrProtocolApp INTEGER, oaDevUpgrServerAddressType InetAddressType, oaDevUpgrServerAddress InetAddress, oaDevUpgrRemoteDir DisplayString, oaDevUpgrRemoteFileName DisplayString, oaDevUpgrPeriodicity INTEGER, oaDevUpgrPeriodDateTime PeriodicityDateAndTime, oaDevUpgrResetDevice INTEGER, oaDevUpgrOperStatus INTEGER, oaDevUpgrAdminStatus INTEGER, oaDevUpgrUsername DisplayString, oaDevUpgrPassword DisplayString, oaDevUpgrServerAddressText DisplayString, oaDevUpgrErrorStatus INTEGER, oaDevUpgrResetDelay INTEGER } oaDevUpgrType OBJECT-TYPE SYNTAX INTEGER { upgradeSoftware (1), getStartupConfig (2), -- copy to startup-config ... putStartupConfig (3), -- copy from startup-config ... getRunningConfig (4), -- copy to running-config ... putRunningConfig (5), -- copy from running-config ... resetDevice (6), -- reset ... upgradeFpga (7) -- upgrade FPGA ... } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The Type of Upgrade (index of the table): 1=Download the Sw Agent version, 2=Download the Startup Device Configuration, 3=Upload the Startup Device Configuration, 4=Download the Running Device Configuration, 5=Upload the Running Device Configuration, 6=Reset Device, 7=Download the Fpga version." ::= { oaDevUpgrEntry 1 } oaDevUpgrProtocolApp OBJECT-TYPE SYNTAX INTEGER { other (1), tftpClient (2), ftpClient (3), scpClient (4), sftpClient (5), localFile (6) } MAX-ACCESS read-write STATUS current DESCRIPTION "Protocol application used for upgrade operation" DEFVAL { ftpClient } ::= { oaDevUpgrEntry 2 } oaDevUpgrServerAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the type of host address to be used as a server for performing a download/upload operation." DEFVAL { unknown } ::= { oaDevUpgrEntry 3 } oaDevUpgrServerAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the host address to be used as a server for performing a download/upload operation. The server address type is determined by the object value of corresponding oaDevUpgrServerAddressType. A value for this object MUST be set prior to set its corresponding oaDevUpgrAdminStatus." DEFVAL { ''H } ::= { oaDevUpgrEntry 4 } oaDevUpgrRemoteDir OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Download/upload remote directory. If oaDevUpgrProtocolApp = localFile, then the object contains name of the local directory used for download/upload operation" ::= { oaDevUpgrEntry 5 } oaDevUpgrRemoteFileName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Download/upload remote file name. If oaDevUpgrProtocolApp = localFile, then the object contains name of the local file used for download/upload operation" ::= { oaDevUpgrEntry 6 } oaDevUpgrPeriodicity OBJECT-TYPE SYNTAX INTEGER { once (1), everyMonth (2), everyWeek (3), everyDay (4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Period of the operation" ::= { oaDevUpgrEntry 7 } oaDevUpgrPeriodDateTime OBJECT-TYPE SYNTAX PeriodicityDateAndTime MAX-ACCESS read-write STATUS current DESCRIPTION "Date and time for upload/download action." ::= { oaDevUpgrEntry 8 } oaDevUpgrResetDevice OBJECT-TYPE SYNTAX INTEGER { other (1), resetDeviceAfterAction (2), dontResetDeviceAfterAction (3), resetDeviceWithDelay (4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Reset after download/upload operation." ::= { oaDevUpgrEntry 9 } oaDevUpgrOperStatus OBJECT-TYPE SYNTAX INTEGER { none (1), waitForSchedule (2), actionInProcess (3), actionCompletedOk (4), actionError (5), actionCanceled (6) } MAX-ACCESS read-only STATUS current DESCRIPTION "Operational status of download/upload operation." ::= { oaDevUpgrEntry 10 } oaDevUpgrAdminStatus OBJECT-TYPE SYNTAX INTEGER { none (1), startNow (2), scheduleAction (3), cancelScheduledAction (4), removeLocalFile (5) } MAX-ACCESS read-write STATUS current DESCRIPTION "Admin status activates download/upload operation." ::= { oaDevUpgrEntry 11 } oaDevUpgrUsername OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Username." ::= { oaDevUpgrEntry 12 } oaDevUpgrPassword OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Password of the username." ::= { oaDevUpgrEntry 13 } oaDevUpgrServerAddressText OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the host address to be used as a server in the Text format (used in Traps)." ::= { oaDevUpgrEntry 14 } oaDevUpgrErrorStatus OBJECT-TYPE SYNTAX INTEGER { none (1), operationNotPermitted (2), invalidBootPartition (3), mergeScriptFailure (4), mergeScriptMissing (5), invalidAction (6), missingParameters (7), serverUnavailable (8), cannotGetGateway (9), cannotGetNetworkMask (10), invalidGetMethod (11), fileTransferFailure (12), invalidSoftwareVersionType (13), mupgradeScriptMissing (14), invalidConfigFileType (15), missingRemoteUserParameter (16), loginFailure (17), noSuchFile (18), cannotSetBootpart (19), cannotGetBootpart (20), resetFailure (21), postResetFailure (22), wrongUpgrType (23), emptyFileName (24), unknownError (25), startProcessFailed (26), getPartitionToogleFlagFailed (27), setPartitionToogleFlagFailed (28), tooLongCommandError (29), backupCurrentStartupConfigError (30), unsupportedAppProtocol (31), invalidFileFormat (32), writeRunningConfigFileFailed (33), downloadFpgaImageFailed (34) } MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the error which occurred (if at all) during the action (used in Traps)." ::= { oaDevUpgrEntry 15 } oaDevUpgrResetDelay OBJECT-TYPE SYNTAX INTEGER (1..600) UNITS "Seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Delay in seconds for performing reset if oaDevUpgrResetDevice set to resetDeviceWithDelay(4)" DEFVAL { 60 } ::= { oaDevUpgrEntry 16 } -- ********************************************************** -- Objects in the Device's Configuration Audit Mechanism -- ********************************************************** oaDevConfigAudit OBJECT IDENTIFIER ::= { oaDevUpgrade 10 } oaDevConfigAuditAdminStatus OBJECT-TYPE SYNTAX INTEGER { none (1), markCurrentConfigAsValid (2), compareWithValidConfig (3), scheduleCompare (4), cancelScheduledCompare (5) } MAX-ACCESS read-write STATUS current DESCRIPTION "Admin status activates synch operation: 2=Mark (now) the current running-configuration as Valid (for 'reference'). Can't be scheduled for later execution nor can it be executed priodically. 3=Compare (now) the current running-configuration with the Valid one (the 'reference'). Can't be scheduled for later execution nor can it be executed priodically. 4=Schedule for later execution a compare action (as described in value # 3). Configure scheduled compare action is changed running configuration, so after setting scheduled action the manager should perform set value 'markCurrentConfigAsValid(2)' in order to save the new running configuration as valid 5=Cancel a scheduled compare action (as described in value # 4) Cancel scheduled compare action is changed running configuration, so after cancel scheduled action the manager should perform set value 'markCurrentConfigAsValid(2)' in order to save the new running configuration as valid" DEFVAL { none } ::= { oaDevConfigAudit 1 } oaDevConfigAuditOperStatus OBJECT-TYPE SYNTAX INTEGER { none (1), actionInProcess (2), actionCompletedOk (3), actionCompletedWithDiff (4), actionCouldNotCompleted (5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Operational status of synch operation: 2=Action is running. 3=Action completed successfully. 4=Action completed with configuration difference(s). 5=Action couldn't complete due to error(s)." DEFVAL { none } ::= { oaDevConfigAudit 2 } oaDevConfigAuditErrorStatus OBJECT-TYPE SYNTAX INTEGER { none (1), operationNotPermitted (2), operationCanceledByUser (3), getCurrentConfigFailure (4), compareFailure (5), configurationChanged (6), noValidConfiguration (7), operationInProcess (8), anotherSchedulerAlreadyActive (9), noActiveScheduler (10), addSchedulerError (11), deleteSchedulerError (12) } MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the error(s) (if at all) during the action (used in Traps)." DEFVAL { none } ::= { oaDevConfigAudit 3 } oaDevConfigAuditPeriodicity OBJECT-TYPE SYNTAX INTEGER { once (1), everyMonth (2), everyWeek (3), everyDay (4), every12Hours (5), every8Hours (6), every6Hours (7), every4Hours (8), every2Hours (9), everyHour (10), every30Minutes (11), every15Minutes (12) } MAX-ACCESS read-write STATUS current DESCRIPTION "Time period for synch operation." DEFVAL { once } ::= { oaDevConfigAudit 4 } oaDevConfigAuditStartTime OBJECT-TYPE SYNTAX PeriodicityDateAndTime MAX-ACCESS read-write STATUS current DESCRIPTION "Date and time to start the synch operation." ::= { oaDevConfigAudit 5 } oaDevConfigAuditSchedulerStatus OBJECT-TYPE SYNTAX INTEGER { notActive (1), active (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Operational status of synch scheduler: 1=Synch scheduler isn't active. 2=Synch scheduler is active." DEFVAL { notActive } ::= { oaDevConfigAudit 6 } oaDevConfigAuditTrapMode OBJECT-TYPE SYNTAX INTEGER { noSendConfigAuditTrap (1), sendConfAuditTrapOnChangeOnly (2), sendConfAuditTrapOnChangeOrDiff (3), sendConfAuditTrapForEachCompare (4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Send Trap mode. This obeject configures trap mode for admin status [oaDevConfigAuditAdminStatus] - markCurrentConfigAsValid or compareWithValidConfig: 1=Trap oaDevConfigAuditCompleted is not sent. 2=Trap oaDevConfigAuditCompleted is sent in case of status change only. 3=Trap oaDevConfigAuditCompleted is sent in case of status change, error or difference with valid configuration. 4=Trap oaDevConfigAuditCompleted is sent for each set object oaDevConfigAuditAdminStatus to markCurrentConfigAsValid or compareWithValidConfig Note: if compare is performed from scheduler, then device always works like in sendConfAuditTrapOnChangeOrDiff(3) mode." DEFVAL { sendConfAuditTrapOnChangeOrDiff } ::= { oaDevConfigAudit 7 } oaAuditTable OBJECT-TYPE SYNTAX SEQUENCE OF OaAuditEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table used for check configuration changes for different features" ::= { oaDevConfigAudit 10 } oaAuditEntry OBJECT-TYPE SYNTAX OaAuditEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of the table." INDEX { oaAuditSubType } ::= { oaAuditTable 1 } OaAuditEntry ::= SEQUENCE { oaAuditSubType INTEGER, oaAuditAdminStatus INTEGER, oaAuditOperStatus INTEGER, oaAuditChecksum Unsigned32, oaAuditChecksumTime DateAndTime, oaAuditValidChecksum Unsigned32, oaAuditValidChecksumTime DateAndTime, oaAuditLastError DisplayString } oaAuditSubType OBJECT-TYPE SYNTAX INTEGER { osEthServTable (1), osEthServFlowTable (2), osEthServClassTable (3) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Sub Configuration Type" ::= { oaAuditEntry 1 } oaAuditAdminStatus OBJECT-TYPE SYNTAX INTEGER { none (1), computeNow (2), computeValid (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Admin Status: computeNow - compute checksum computeValid - compute checksum and set it as valid " ::= { oaAuditEntry 2 } oaAuditOperStatus OBJECT-TYPE SYNTAX INTEGER { none (1), computeInProcess (2), computeFinishedOK (3), computeError (4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Operation Status: computeInProcess - compute checksum in process computeFinishedOK - checksum computed successfully computeError - compute checksum failed" ::= { oaAuditEntry 4 } oaAuditChecksum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Last computed checksum" ::= { oaAuditEntry 5 } oaAuditChecksumTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Last Checksum Time" ::= { oaAuditEntry 6 } oaAuditValidChecksum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid Checksum" ::= { oaAuditEntry 7 } oaAuditValidChecksumTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Valid Checksum Time" ::= { oaAuditEntry 8 } oaAuditLastError OBJECT-TYPE SYNTAX DisplayString (SIZE (2..160)) MAX-ACCESS read-only STATUS current DESCRIPTION "Last Error" ::= { oaAuditEntry 100 } oaAuditScheduleParams OBJECT IDENTIFIER ::= { oaDevConfigAudit 11 } oaAuditScheduleStart OBJECT-TYPE SYNTAX PeriodicityDateAndTime MAX-ACCESS read-write STATUS current DESCRIPTION "Date and time to start of audit configuration for entries in the oaAuditTable" ::= { oaAuditScheduleParams 1 } oaAuditSchedulePeriod OBJECT-TYPE SYNTAX INTEGER (1..44640) UNITS "minutes" MAX-ACCESS read-write STATUS current DESCRIPTION "Scheduler interval used for compute checksum for entries in the oaAuditTable" DEFVAL { 1440 } ::= { oaAuditScheduleParams 2 } oaAuditScheduleStatus OBJECT-TYPE SYNTAX INTEGER { disable (1), enable (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Scheduler status" DEFVAL { disable } ::= { oaAuditScheduleParams 3 } oaAuditScheduleError OBJECT-TYPE SYNTAX DisplayString (SIZE (2..160)) MAX-ACCESS read-only STATUS current DESCRIPTION "Last Error" ::= { oaAuditScheduleParams 4 } oaAuditMinSchedulePeriod OBJECT-TYPE SYNTAX INTEGER (0..44640) UNITS "minutes" MAX-ACCESS read-only STATUS current DESCRIPTION "Minimal value of scheduler interval supported by the agent Value 0 means that scheduler isn't supported" ::= { oaAuditScheduleParams 5 } -- ******************************************************************* -- Notification Definition section -- ******************************************************************* oaDevConfigAuditCompleted NOTIFICATION-TYPE OBJECTS { oaDevConfigAuditAdminStatus, oaDevConfigAuditOperStatus, oaDevConfigAuditErrorStatus } STATUS current DESCRIPTION "Generated when a synchronization action is completed." ::= { oaDevUpgrNotifications 94 } oaDevUpgradeStarted NOTIFICATION-TYPE OBJECTS { oaDevUpgrType, oaDevUpgrProtocolApp, oaDevUpgrServerAddressText, oaDevUpgrRemoteDir, oaDevUpgrRemoteFileName } STATUS current DESCRIPTION "Generated when a device Upgrade process starts." ::= { oaDevUpgrNotifications 101 } oaDevUpgradeFailed NOTIFICATION-TYPE OBJECTS { oaDevUpgrType, oaDevUpgrProtocolApp, oaDevUpgrServerAddressText, oaDevUpgrRemoteDir, oaDevUpgrRemoteFileName, oaDevUpgrErrorStatus } STATUS current DESCRIPTION "Generated when a device Upgrade process was failed." ::= { oaDevUpgrNotifications 102 } oaDevUpgradeCompletedOk NOTIFICATION-TYPE OBJECTS { oaDevUpgrType, oaDevUpgrProtocolApp, oaDevUpgrServerAddressText, oaDevUpgrRemoteDir, oaDevUpgrRemoteFileName } STATUS current DESCRIPTION "Generated when a device Upgrade process comleted successfully." ::= { oaDevUpgrNotifications 103 } -- ******************************************************************* -- Conformance Information -- ******************************************************************* oaDevUpgrMIBCompliances OBJECT IDENTIFIER ::= { oaDevUpgrConformance 1 } oaDevUpgrMIBGroups OBJECT IDENTIFIER ::= { oaDevUpgrConformance 2 } oaDevUpgrMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The core compliance statement for all 'oaDevUpgrade' MIB implementations." MODULE -- this module MANDATORY-GROUPS { oaDevUpgrGroup, oaDevUpgrNotificationsGroup } ::= { oaDevUpgrMIBCompliances 1 } -- ................................................................... -- Conformance Groups -- ................................................................... oaDevUpgrGroup OBJECT-GROUP OBJECTS { oaDevUpgrGenSupport, oaDevUpgrType, oaDevUpgrProtocolApp, oaDevUpgrServerAddressType, oaDevUpgrServerAddress, oaDevUpgrRemoteDir, oaDevUpgrRemoteFileName, oaDevUpgrPeriodicity, oaDevUpgrPeriodDateTime, oaDevUpgrResetDevice, oaDevUpgrOperStatus, oaDevUpgrAdminStatus, oaDevUpgrUsername, oaDevUpgrPassword, oaDevUpgrServerAddressText, oaDevUpgrErrorStatus, oaDevUpgrResetDelay, oaDevConfigAuditAdminStatus, oaDevConfigAuditOperStatus, oaDevConfigAuditErrorStatus, oaDevConfigAuditPeriodicity, oaDevConfigAuditStartTime, oaDevConfigAuditSchedulerStatus, oaDevConfigAuditTrapMode, oaAuditAdminStatus, oaAuditOperStatus, oaAuditChecksum, oaAuditChecksumTime, oaAuditValidChecksum, oaAuditValidChecksumTime, oaAuditLastError, oaAuditScheduleStart, oaAuditSchedulePeriod, oaAuditScheduleStatus, oaAuditScheduleError, oaAuditMinSchedulePeriod } STATUS current DESCRIPTION "Mandatory objects for grouping of Device Upgrade parameters." ::= { oaDevUpgrMIBGroups 1 } oaDevUpgrNotificationsGroup NOTIFICATION-GROUP NOTIFICATIONS { oaDevUpgradeStarted, oaDevUpgradeFailed, oaDevUpgradeCompletedOk, oaDevConfigAuditCompleted } STATUS current DESCRIPTION "The notification which are required to be supported by implementations of this MIB." ::= { oaDevUpgrMIBGroups 2 } END