DC-RTM-MIB DEFINITIONS ::= BEGIN -- PRODUCT-SHORT-NAME rtm IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, enterprises, Integer32, Unsigned32, IpAddress FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF TEXTUAL-CONVENTION, RowStatus, TruthValue, DisplayString FROM SNMPv2-TC IANAipRouteProtocol FROM IANA-RTPROTO-MIB InetAddressType, InetAddress FROM INET-ADDRESS-MIB AdminStatus, OperStatus, RouteAction, AdminDistance, PathType, InetSubAddressType, BfdSessionStatus, NumericIndexOrZero FROM DC-MASTER-TC MplsIndexType FROM MPLS-LSR-STD-MIB RouterID FROM DC-OSPF-MIB ; rtmMib MODULE-IDENTITY LAST-UPDATED "201412210000Z" -- December 21, 2014 ORGANIZATION "MRV Communications." CONTACT-INFO "For technical support, please contact your service channel" DESCRIPTION "The MIB module for management of the DC-RTM product." -- Revision history REVISION "201412210000Z" -- December 21, 2014 DESCRIPTION "Initial edition." ::= { opx 7 } nbase OBJECT IDENTIFIER ::= { enterprises 629 } opx OBJECT IDENTIFIER ::= { nbase 10 } rtmObjects OBJECT IDENTIFIER ::= { rtmMib 1 } -- tables rtmTrap OBJECT IDENTIFIER ::= { rtmMib 2 } -- traps -- Textual conventions FteIndex ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The index value identifying a fault tolerant entity." SYNTAX Unsigned32 OspfTag ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "An OSPF Tag." SYNTAX Unsigned32 (0..'FFFFFFFF'h) RtmMjStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The status of a master join." SYNTAX INTEGER { mjNotJoined(1), -- initial state of join mjSentAddJoin(2), -- sent ATG_FT_ADD_JOIN to slave mjSentRegister(3), -- sent registration signal to slave mjJoinActive(4), -- join is active mjSentDelJoin(5), -- sent ATG_FT_DELETE_JOIN to slave mjSentUnregister(6), -- sent unregistration signal to slave mjJoinGone(7), -- join has been deleted mjFailedToRegister(8), -- slave rejected registration message mjFailingOver(9), -- slave is failing over mjFailed(10) -- join has permanently failed } RtmSjStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The status of a slave join." SYNTAX INTEGER { sjNotJoined(1), -- initial state of join sjJoined(2), -- master has sent an ATG_FT_ADD_JOIN sjJoinActive(3), -- master has registered the join sjJoinUnreg(4), -- master has unregistered the join sjJoinGone(5), -- master has deleted the join sjFailingOver(6), -- master is failing over sjFailed(7) -- join has permanently failed } InterfaceType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The type of interface to which a join applies." SYNTAX INTEGER { ifActiveRoutes(1), -- Active Routes ifRteProtInput(2) -- Routing Protocol Input } AriPrtnrType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The type of slave partner to join to over the Active Routes Interface." SYNTAX INTEGER { ariPrtnrFt(1), -- Forwarding Table Stub ariPrtnrLdf(2), -- Labelled Data Forwarding Table Stub ariPrtnrRsm(3), -- Route Selection Manager ariPrtnrBgp(4), -- BGP Protocol Manager ariPrtnrPim(5) -- PIM Protocol Manager } RdstSetFieldType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The type of action a Set Field entry performs." SYNTAX INTEGER { rdstSetBgpComm(1), -- Set BGP Community rdstSetBgpExtComm(2) -- Set BGP Extended Community } EqualCostRouteOpts ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The method used to determine how to choose which equal cost routes for a given destination to give to the active routing information consumers, if there is more than one route. This value is used in building responses to ATG_QCAR_GET_ROUTES and ATG_QCAR_QUERY_ROUTE signals, and also in building ATG_QCAR_ROUTE_UPDATE and ATG_QCAR_ROUTE_IND signals for consumers that require them. The permitted values for this field are as follows. all: All equal cost routes should be given to the active routing information consumers. one: DC-RTM picks one as soon as it can, and only tells the active routing information consumers about that one route. It only switches to another route if the chosen one is deleted, or if the chosen one no longer has the lowest administrative distance among routes to this destination (for example if a new route is added with a lower adminstrative distance)." SYNTAX INTEGER { equalCostAll(1), -- all routes equalCostOne(2) -- one route } MetricConversion ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "How to convert the metric in the source routing information to a new metric in the destination routing information. Possible actions are same: Use the supplied metric value constant: Ignore the supplied metric and use the constant value given in the metric numeric parameter field inverse: Map high values onto low ones, and vice-versa, by subtracting the supplied metric from 0xffffffff. scale up: Use the supplied metric multiplied by the value given in the metric numeric parameter field, or 0xffffffff if this is smaller. scale down: Use the supplied metric divided by the value given in the metric numeric parameter field (which must not be zero), rounding down to the next whole number. truncate: Use the smaller of the supplied metric or the metric numeric parameter field." SYNTAX INTEGER { metricConvSame(1), -- same metricConvConstant(2), -- constant metricConvInverse(3), -- inverse metricConvScaleUp(4), -- scale up metricConvScaleDown(5), -- scale down metricConvTruncate(6) -- truncate } InfoSourceDest ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A source of, or destination for, routing information. These values are used when redistributing routing information." SYNTAX INTEGER { infoSourceAll(0), -- all values excluding connected infoSourceAllInclConnected(1), -- all values including connected infoSourceOther(65536), -- not specified infoSourceConnected(131072), -- directly connected network infoSourceStatic(196608), -- static route infoSourceIcmp(262144), -- ICMP redirect infoSourceEgp(327680), -- Exterior Gateway Protocol infoSourceGgp(393216), -- Gateway-Gateway Protocol infoSourceHello(458752), -- FuzzBall HelloSpeak infoSourceRip(524288), -- RIP infoSourceIsis(589824), -- IS-IS infoSourceEsis(655360), -- ISO 9542 infoSourceIgrp(720896), -- IGRP infoSourceBbnSpfIgp(786432), -- BBN SPF IGP infoSourceOspf(851968), -- OSPF infoSourceBgp(917504), -- BGP infoSourceIdpr(983040), -- InterDomain Policy Routing infoSourceEigrp(1048576), -- EIGRP infoSourceDvmrp(1114112), -- DVMRP infoSourceEnni(1179648) -- E-NNI Routing } BgpOriginCode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A BGP origin code." SYNTAX INTEGER { bgpOriginIgp(0), -- path interior to originating AS bgpOriginEgp(1), -- path learned via EGP protocol bgpOriginIncomplete(2) -- path was learned by some other means } BgpCommunity ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The representation of a BGP Community." SYNTAX OCTET STRING (SIZE(4)) BgpExtendedCommunity ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The representation of a BGP Extended Community." SYNTAX OCTET STRING (SIZE(8)) RouteInfo ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A Routing Protocol Information Type. For OSPF, this is an integer representation of the OID which is required by RFC 2096. The RFCs which define the OIDs, and the represented OIDs, are show here. OSPF - RFC 1850. For ISIS, this is an integer representation of the types of route to IP reachable addresses." SYNTAX INTEGER { none(0), ospfIntraArea(1), -- { ospfRouteGroup 1 } ospfInterArea(2), -- { ospfRouteGroup 2 } ospfExternalType1(3), -- { ospfRouteGroup 3 } ospfExternalType2(4), -- { ospfRouteGroup 4 } isisL1Internal(5), -- L1 route with internal metric and -- up/down bit set to 0 isisL2Internal(6), -- L2 route with internal metric isisL1InternalDown(7), -- L1 route with internal metric and -- up/down bit set to 1 isisL1External(8), -- L1 route with external metric and -- up/down bit set to 0 isisL2External(9), -- L2 route with external metric isisL1ExternalDown(10) -- L1 route with external metric and -- up/down bit set to 1 } RouteType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Routing Type." SYNTAX INTEGER { other(1), -- not specified by this MIB reject(2), -- route which discards traffic local(3), -- local interface remote(4) -- remote destination } RtmBfdSupport ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "BFD support level." SYNTAX INTEGER { none(1), -- no BFD desired(2), -- use BFD, but do not assume that -- the peer necessarily supports -- BFD required(3) -- use BFD, and assume that the peer -- also supports BFD } RtmEntityRestartExit ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The reason for exiting an attempted Graceful Restart." SYNTAX INTEGER { none (1), -- none attempted (RTM entity not -- started or Graceful Restart not -- configured) inProgress (2), -- restart in progress completed (3), -- successfully completed timedOut (4), -- timed out canceled (5) -- canceled because the entity was -- stopped. } ------------------------------------------------------------------------------- -- DC-RTM Entity Table -- This table is used to create and manage DC-RTM entities. rtmEntityTable OBJECT-TYPE -- FAMILY-SHORT-NAME qcr_ent SYNTAX SEQUENCE OF RtmEntityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of DC-RTM entities." ::= { rtmObjects 1 } rtmEntityEntry OBJECT-TYPE SYNTAX RtmEntityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry represents an instance of the DC-RTM entity." INDEX { rtmEntityFteIndex } ::= { rtmEntityTable 1 } RtmEntityEntry ::= SEQUENCE { rtmEntityFteIndex FteIndex, rtmEntityRowStatus RowStatus, rtmEntityAdminStat AdminStatus, rtmEntityOperStatus OperStatus, rtmEntityDsConnctd AdminDistance, rtmEntityDsStatDf AdminDistance, rtmEntityDsOspfInt AdminDistance, rtmEntityDsOspfExt AdminDistance, rtmEntityDsIntBgp AdminDistance, rtmEntityDsExtBgp AdminDistance, rtmEntityDsIsisInt1 AdminDistance, rtmEntityDsIsisInt2 AdminDistance, rtmEntityDsIsisExt1 AdminDistance, rtmEntityDsIsisExt2 AdminDistance, rtmEntityDsRip AdminDistance, rtmEntityDsEgp AdminDistance, rtmEntityDsGgp AdminDistance, rtmEntityDsHello AdminDistance, rtmEntityDsEsis AdminDistance, rtmEntityDsBbnspfigp AdminDistance, rtmEntityDsIdpr AdminDistance, rtmEntityDsIgrp AdminDistance, rtmEntityDsEigrpSmm AdminDistance, rtmEntityDsIntEigrp AdminDistance, rtmEntityDsEigrpExt AdminDistance, rtmEntityDsUnknown AdminDistance, rtmEntityEqlCostOpt EqualCostRouteOpts, rtmEntityDelDeadRte TruthValue, rtmEntityDeadRpmTmr Integer32, rtmEntityRouteNumber Integer32, rtmEntityAddressFamily InetAddressType, rtmEntityDsDvmrp AdminDistance, rtmEntityI3Index FteIndex, rtmEntityI3JoinStatus RtmMjStatus, rtmEntityPartnerWaitTime Integer32, rtmEntityStartupTime Integer32, rtmEntityRestartTime Integer32, rtmEntityFtStateRetained TruthValue, rtmEntityUseUnidirectionalLinks TruthValue, rtmEntityBfdIndex NumericIndexOrZero, rtmEntityBfdJoinStatus RtmMjStatus, rtmEntityEnableTrapSupport TruthValue, rtmEntityDisplayLocalAddrs TruthValue, rtmEntityRestarting TruthValue, rtmEntityRestartTimeLeft Unsigned32, rtmEntityRestartExitReason RtmEntityRestartExit } rtmEntityFteIndex OBJECT-TYPE SYNTAX FteIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of this rtmEntityEntry. This is the HAF entity index passed on the entity create parameters." ::= { rtmEntityEntry 1 } rtmEntityRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Used to create and delete a DC-RTM fault tolerant entity." ::= { rtmEntityEntry 2 } rtmEntityAdminStat OBJECT-TYPE SYNTAX AdminStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The desired administrative state of the DC-RTM entity." DEFVAL { adminStatusDown } ::= { rtmEntityEntry 3 } rtmEntityOperStatus OBJECT-TYPE SYNTAX OperStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The current operational state of the DC-RTM entity." ::= { rtmEntityEntry 4 } rtmEntityDsConnctd OBJECT-TYPE SYNTAX AdminDistance MAX-ACCESS read-create STATUS current DESCRIPTION "The administrative distance used for directly connected routes. The lower the distance for a given type of route, the more likely a route of this type is to be used by DC-RTM as the active route for the given destination. See the DC-RTM Architecture Guide for more information about the use of administrative distances." DEFVAL { 0 } ::= { rtmEntityEntry 5 } rtmEntityDsStatDf OBJECT-TYPE SYNTAX AdminDistance MAX-ACCESS read-create STATUS current DESCRIPTION "The default administrative distance used for statically defined routes in the static routes MIB table. It can be overridden for individual static routes. The lower the distance for a given route, the more likely that route is to be used by DC-RTM as the active route for the given destination. See the DC-RTM Architecture Guide for more information about the use of administrative distances." DEFVAL { 1 } ::= { rtmEntityEntry 6 } rtmEntityDsOspfInt OBJECT-TYPE SYNTAX AdminDistance MAX-ACCESS read-create STATUS current DESCRIPTION "The administrative distance used for OSPF internal routes. The lower the distance for a given type of route, the more likely a route of this type is to be used by DC-RTM as the active route for the given destination. See the DC-RTM Architecture Guide for more information about the use of administrative distances." DEFVAL { 30 } ::= { rtmEntityEntry 7 } rtmEntityDsOspfExt OBJECT-TYPE SYNTAX AdminDistance MAX-ACCESS read-create STATUS current DESCRIPTION "The administrative distance used for OSPF Autonomous System external routes. The lower the distance for a given type of route, the more likely a route of this type is to be used by DC-RTM as the active route for the given destination. See the DC-RTM Architecture Guide for more information about the use of administrative distances." DEFVAL { 110 } ::= { rtmEntityEntry 8 } rtmEntityDsIntBgp OBJECT-TYPE SYNTAX AdminDistance MAX-ACCESS read-create STATUS current DESCRIPTION "The administrative distance used for internal and VPN BGP routes. The lower the distance for a given type of route, the more likely a route of this type is to be used by DC-RTM as the active route for the given destination. See the DC-RTM Architecture Guide for more information about the use of administrative distances." DEFVAL { 200 } ::= { rtmEntityEntry 9 } rtmEntityDsExtBgp OBJECT-TYPE SYNTAX AdminDistance MAX-ACCESS read-create STATUS current DESCRIPTION "The administrative distance used for external BGP routes. The lower the distance for a given type of route, the more likely a route of this type is to be used by DC-RTM as the active route for the given destination. See the DC-RTM Architecture Guide for more information about the use of administrative distances." DEFVAL { 20 } ::= { rtmEntityEntry 10 } rtmEntityDsIsisInt1 OBJECT-TYPE SYNTAX AdminDistance MAX-ACCESS read-create STATUS current DESCRIPTION "The administrative distance used for IS-IS level 1 internal routes. The lower the distance for a given type of route, the more likely a route of this type is to be used by DC-RTM as the active route for the given destination. See the DC-RTM Architecture Guide for more information about the use of administrative distances." DEFVAL { 115 } ::= { rtmEntityEntry 11 } rtmEntityDsIsisInt2 OBJECT-TYPE SYNTAX AdminDistance MAX-ACCESS read-create STATUS current DESCRIPTION "The administrative distance used for IS-IS level 2 internal routes. The lower the distance for a given type of route, the more likely a route of this type is to be used by DC-RTM as the active route for the given destination. See the DC-RTM Architecture Guide for more information about the use of administrative distances." DEFVAL { 116 } ::= { rtmEntityEntry 12 } rtmEntityDsIsisExt1 OBJECT-TYPE SYNTAX AdminDistance MAX-ACCESS read-create STATUS current DESCRIPTION "The administrative distance used for IS-IS level 1 external routes. The lower the distance for a given type of route, the more likely a route of this type is to be used by DC-RTM as the active route for the given destination. See the DC-RTM Architecture Guide for more information about the use of administrative distances." DEFVAL { 117 } ::= { rtmEntityEntry 13 } rtmEntityDsIsisExt2 OBJECT-TYPE SYNTAX AdminDistance MAX-ACCESS read-create STATUS current DESCRIPTION "The administrative distance used for IS-IS level 2 external routes. The lower the distance for a given type of route, the more likely a route of this type is to be used by DC-RTM as the active route for the given destination. See the DC-RTM Architecture Guide for more information about the use of administrative distances." DEFVAL { 118 } ::= { rtmEntityEntry 14 } rtmEntityDsRip OBJECT-TYPE SYNTAX AdminDistance MAX-ACCESS read-create STATUS current DESCRIPTION "The administrative distance used for RIP routes. The lower the distance for a given type of route, the more likely a route of this type is to be used by DC-RTM as the active route for the given destination. See the DC-RTM Architecture Guide for more information about the use of administrative distances." DEFVAL { 120 } ::= { rtmEntityEntry 15 } rtmEntityDsEgp OBJECT-TYPE SYNTAX AdminDistance MAX-ACCESS read-create STATUS current DESCRIPTION "The administrative distance used for Exterior Gateway Protocol routes. The lower the distance for a given type of route, the more likely a route of this type is to be used by DC-RTM as the active route for the given destination. See the DC-RTM Architecture Guide for more information about the use of administrative distances." DEFVAL { 205 } ::= { rtmEntityEntry 16 } rtmEntityDsGgp OBJECT-TYPE SYNTAX AdminDistance MAX-ACCESS read-create STATUS current DESCRIPTION "The administrative distance used for Gateway-Gateway Protocol routes. The lower the distance for a given type of route, the more likely a route of this type is to be used by DC-RTM as the active route for the given destination. See the DC-RTM Architecture Guide for more information about the use of administrative distances." DEFVAL { 210 } ::= { rtmEntityEntry 17 } rtmEntityDsHello OBJECT-TYPE SYNTAX AdminDistance MAX-ACCESS read-create STATUS current DESCRIPTION "The administrative distance used for FuzzBall HelloSpeak routes. The lower the distance for a given type of route, the more likely a route of this type is to be used by DC-RTM as the active route for the given destination. See the DC-RTM Architecture Guide for more information about the use of administrative distances." DEFVAL { 215 } ::= { rtmEntityEntry 18 } rtmEntityDsEsis OBJECT-TYPE SYNTAX AdminDistance MAX-ACCESS read-create STATUS current DESCRIPTION "The administrative distance used for ISO 9542 routes. The lower the distance for a given type of route, the more likely a route of this type is to be used by DC-RTM as the active route for the given destination. See the DC-RTM Architecture Guide for more information about the use of administrative distances." DEFVAL { 225 } ::= { rtmEntityEntry 19 } rtmEntityDsBbnspfigp OBJECT-TYPE SYNTAX AdminDistance MAX-ACCESS read-create STATUS current DESCRIPTION "The administrative distance used for BBN SPF IGP routes. The lower the distance for a given type of route, the more likely a route of this type is to be used by DC-RTM as the active route for the given destination. See the DC-RTM Architecture Guide for more information about the use of administrative distances." DEFVAL { 225 } ::= { rtmEntityEntry 20 } rtmEntityDsIdpr OBJECT-TYPE SYNTAX AdminDistance MAX-ACCESS read-create STATUS current DESCRIPTION "The administrative distance used for InterDomain Policy Routing routes. The lower the distance for a given type of route, the more likely a route of this type is to be used by DC-RTM as the active route for the given destination. See the DC-RTM Architecture Guide for more information about the use of administrative distances." DEFVAL { 225 } ::= { rtmEntityEntry 21 } rtmEntityDsIgrp OBJECT-TYPE SYNTAX AdminDistance MAX-ACCESS read-create STATUS current DESCRIPTION "The administrative distance used for IGRP routes. The lower the distance for a given type of route, the more likely a route of this type is to be used by DC-RTM as the active route for the given destination. See the DC-RTM Architecture Guide for more information about the use of administrative distances." DEFVAL { 100 } ::= { rtmEntityEntry 22 } rtmEntityDsEigrpSmm OBJECT-TYPE SYNTAX AdminDistance MAX-ACCESS read-create STATUS current DESCRIPTION "The administrative distance used for enhanced IGRP summary routes. The lower the distance for a given type of route, the more likely a route of this type is to be used by DC-RTM as the active route for the given destination. See the DC-RTM Architecture Guide for more information about the use of administrative distances." DEFVAL { 5 } ::= { rtmEntityEntry 23 } rtmEntityDsIntEigrp OBJECT-TYPE SYNTAX AdminDistance MAX-ACCESS read-create STATUS current DESCRIPTION "The administrative distance used for internal enhanced IGRP routes. The lower the distance for a given type of route, the more likely a route of this type is to be used by DC-RTM as the active route for the given destination. See the DC-RTM Architecture Guide for more information about the use of administrative distances." DEFVAL { 90 } ::= { rtmEntityEntry 24 } rtmEntityDsEigrpExt OBJECT-TYPE SYNTAX AdminDistance MAX-ACCESS read-create STATUS current DESCRIPTION "The administrative distance used for enhanced IGRP external routes. The lower the distance for a given type of route, the more likely a route of this type is to be used by DC-RTM as the active route for the given destination. See the DC-RTM Architecture Guide for more information about the use of administrative distances." DEFVAL { 170 } ::= { rtmEntityEntry 25 } rtmEntityDsUnknown OBJECT-TYPE SYNTAX AdminDistance MAX-ACCESS read-create STATUS current DESCRIPTION "The administrative distance used for routes which come from an unrecognized routing protocol. The lower the distance for a given type of route, the more likely a route of this type is to be used by DC-RTM as the active route for the given destination. See the DC-RTM Architecture Guide for more information about the use of administrative distances." DEFVAL { 255 } ::= { rtmEntityEntry 26 } rtmEntityEqlCostOpt OBJECT-TYPE SYNTAX EqualCostRouteOpts MAX-ACCESS read-create STATUS current DESCRIPTION "How to select which equal cost routes to give to an active routing information consumer, if there is more than one route to a given destination with the lowest administrative distance. This parameter is used in building responses to ATG_QCAR_GET_ROUTES and ATG_QCAR_QUERY_ROUTE signals, and also in building ATG_QCAR_ROUTE_UPDATE and ATG_QCAR_ROUTE_IND signals for consumers that require them. The value of this field must not be changed while the row status of this MIB is AMB_ROW_STATUS_ACTIVE and the admin status is AMB_ADMIN_STATUS_UP. If you want to use IGP shortcuts for any routes then this field must be set to 'equalCostAll'." DEFVAL { equalCostAll } ::= { rtmEntityEntry 27 } rtmEntityDelDeadRte OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Whether to delete routes from a Routing Protocol Manager (RPM) whose join to DC-RTM goes down. If this is set to TRUE then the routes are deleted after the time specified in the 'dead RPM timer' parameter. If the join between an RPM and DC-RTM goes down, typically because the RPM is no longer running, then the routes received from that RPM gradually become out of date. This parameter allows DC-RTM to continue to use these routes regardless of whether the RPM ever restarts, or to stop using them after a period of time. This period of time should represent the maximum amount of time for which the RPM would be down if this were only a temporary state of affairs. Changes to this field do not affect joins which have previously died, including those which are currently running a dead RPM timer." DEFVAL { true } ::= { rtmEntityEntry 28 } rtmEntityDeadRpmTmr OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Only used if the option is set to TRUE to delete routes from an RPM which DC-RTM can no longer see. This field defines the period of time that the join to an RPM can be down before its routes are deleted. This period of time should represent the maximum amount of time for which the RPM would be down if this were only a temporary state of affairs. The units for this field are minutes by default. Changes to this field do not affect joins which have previously died, including those which are currently running a dead RPM timer." DEFVAL { 1 } ::= { rtmEntityEntry 29 } rtmEntityRouteNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of destination prefixes to which DC-RTM currently has a route. This is the same as the number of rows in the rtmRouteTable if the following are both true. - Either rtmEntityEqlCostOpt is set to 'one', or DC-RTM knows of at most one route to each destination prefix. This means that there is at most one route in rtmRouteTable for each destination prefix included in rtmEntityRouteNumber. - None of the routes which DC-RTM has learned about are loose next hops that cannot be resolved. This means that there is at least one route in rtmRouteTable per destination prefix included in rtmEntityRouteNumber." ::= { rtmEntityEntry 30 } rtmEntityAddressFamily OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The address family that this instance of DC-RTM supports. The value of this field must not be changed while the row status of this MIB is AMB_ROW_STATUS_ACTIVE and the admin status is AMB_ADMIN_STATUS_UP." DEFVAL { ipv4 } ::= { rtmEntityEntry 31 } rtmEntityDsDvmrp OBJECT-TYPE SYNTAX AdminDistance MAX-ACCESS read-create STATUS current DESCRIPTION "The administrative distance used for DVMRP routes. The lower the distance for a given type of route, the more likely a route of this type is to be used by DC-RTM as the active route for the given destination. See the DC-RTM Architecture Guide for more information about the use of administrative distances." DEFVAL { 225 } ::= { rtmEntityEntry 32 } rtmEntityI3Index OBJECT-TYPE SYNTAX FteIndex MAX-ACCESS read-create STATUS current DESCRIPTION "The entity index of the instance of the I3 stub to which this instance of DC-RTM should join. The value of this field must not be changed while the row status of this MIB is AMB_ROW_STATUS_ACTIVE and the admin status is AMB_ADMIN_STATUS_UP." DEFVAL { 1 } ::= { rtmEntityEntry 33 } rtmEntityI3JoinStatus OBJECT-TYPE SYNTAX RtmMjStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The status of the I3 master join." ::= { rtmEntityEntry 34 } rtmEntityPartnerWaitTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The period that DC-RTM waits for joins from Routing Protocol Managers (RPMs) to be reestablished when DC-RTM is activated. DC-RTM checks for routing table convergence by waiting for a complete set of routes from all joins from RPMs that are established within this period. The partner wait timer duration effectively acts as the minimum restart interval. The value should be set to zero if the forwarding table does not maintain routing state when DC-RTM restarts." DEFVAL { 30000 } ::= { rtmEntityEntry 35 } rtmEntityStartupTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "This is the startup timer duration that is used when DC-RTM is activated and no routing state has been retained by the forwarding table as part of graceful restart procedures. This timer duration is used when rtmEntityFtStateRetained is 'false'. It determines the maximum length of time before DC-RTM deems that routing table convergence is complete and hence the maximum length of time before DC-RTM sends routing updates to the forwarding table. This is typically set to a small value to ensure that the forwarding table is populated in a timely manner." DEFVAL { 30000 } ::= { rtmEntityEntry 36 } rtmEntityRestartTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "This is the startup timer duration that is used when DC-RTM is activated and routing state has been retained by the forwarding table as part of graceful restart procedures. This timer duration is used when rtmEntityFtStateRetained is 'true'. It determines the maximum length of time before DC-RTM deems that routing table convergence is complete and hence the maximum length of time before DC-RTM sends routing updates to the forwarding table. This is typically set to a value greater than the restart timer duration of each routing protocol, so that the routing table can converge before the forwarding table is updated." DEFVAL { 180000 } ::= { rtmEntityEntry 37 } rtmEntityFtStateRetained OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Whether state has been maintained by the forwarding table during a restart of DC-RTM. This indicates which startup timer duration DC-RTM should uses. Setting this to 'true' causes DC-RTM to use the value of rtmEntityRestartTime as the startup timer duration. Setting this to 'false' causes DC-RTM to use the value of rtmEntityStartupTime as the startup timer duration." DEFVAL { false } ::= { rtmEntityEntry 38 } rtmEntityUseUnidirectionalLinks OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Are unidirectional links usable for the FIB maintained by this instance of DC-RTM? If set to 'false' then unidirectional interfaces reported over the I3 and IGP shortcuts reported over the RPI are discarded. If set to 'true' then unidirectional interfaces can be used for next hops reported over the Active Routes Interface. Note in particular that IGP shortcuts through TE-tunnel next hops are reported over the Active Routes Interface in addition to native adjacency next hops. If the active route consumers of this FIB cannot use unidirectional links then this field should be set to 'false'. An example of such an active route consumer is DC-PIM. Because DC-PIM uses paths for Reverse Path Forwarding, it cannot use unidirectional links. If this field is changed while DC-RTM is active, DC-RTM deactivates and then reactivates in order to refresh all routing information." DEFVAL { true } ::= { rtmEntityEntry 39 } rtmEntityBfdIndex OBJECT-TYPE SYNTAX NumericIndexOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "The entity index of the instance of the BFD stub to which this instance of DC-RTM should join. A value of zero indicates that no BFD join is required. If a non-zero value is specified then DC-RTM can only be active if the corresponding BFD stub is active." DEFVAL { 0 } ::= { rtmEntityEntry 40 } rtmEntityBfdJoinStatus OBJECT-TYPE SYNTAX RtmMjStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The status of the BFD master join." ::= { rtmEntityEntry 41 } rtmEntityEnableTrapSupport OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Set this object to 'true' to enable trap support in DC-RTM. When this field is set to 'true', DC-RTM will generate the rtmOperStateChange, rtmStaticRouteChange and rtmPathActivityChange traps." DEFVAL { false } ::= { rtmEntityEntry 42 } rtmEntityDisplayLocalAddrs OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "If set to 'true', local IP addresses are listed as routes in the rtmRouteTable and rtmRibTable, and included in rtmEntityRouteNumber. If set to 'false', local IP addresses are not listed. The value of this field should be decided during integration. The field is not expected to be exposed to end users and is not expected to change during the lifetime of the DC-RTM entity. As such, this object follows the replaceOnlyWhileDisabled behavior." DEFVAL { true } ::= { rtmEntityEntry 43 } rtmEntityRestarting OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "If this object is true, then Graceful Restart is in progress." ::= { rtmEntityEntry 44 } rtmEntityRestartTimeLeft OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "If Graceful Restart is in progress then this is the time remaining in seconds in the Graceful Restart period. The original Graceful Restart is configured in the Restart Period field. If Graceful Restart is not is progress then this field will be 0." ::= { rtmEntityEntry 45 } rtmEntityRestartExitReason OBJECT-TYPE SYNTAX RtmEntityRestartExit MAX-ACCESS read-only STATUS current DESCRIPTION "Describes the outcome of the last attempt at a Graceful Restart. If the value is 'none', no restart has yet been attempted. If the value is 'inProgress', a restart attempt is currently underway." ::= { rtmEntityEntry 46 } ------------------------------------------------------------------------------- -- DC-RTM Redistribution Table -- This table is used to determine how routing information is redistributed to -- routing protocol managers (RPMs) using DC-RTM's Routing Protocol Input -- interface. The RPM to which the information may be redistributed is -- called the destination RPM. -- Routing information is received from RPMs and from the MIB (for static -- routes); these are referred to as the routing information source. -- There are two key aspects to an entry in this table. -- Firstly, it contains a set of filters which determine whether or not the -- entry applies to a given pairing of a given set of routing information and -- a given destination RPM. There is a filter priority to determine which -- entry to use if there are multiple entries whose filters match a given -- pairing. -- Secondly, it contains parameters to use when redistributing the routing -- information to the destination RPM, including a flag which determines -- whether or not to redistribute at all. rtmRedistTable OBJECT-TYPE -- FAMILY-SHORT-NAME qcr_rds SYNTAX SEQUENCE OF RtmRedistEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of DC-RTM redistribution information entries. This table is used to determine how routing information is redistributed to routing protocol managers (RPMs) using DC-RTM's Routing Protocol Input interface. The RPM to which the information may be redistributed is called the destination RPM. Routing information is received from RPMs and from the MIB (for static routes); these are referred to as the routing information source. In general, DC-RTM will not redistribute a route from an RPM back to the same RPM. The one exception to this is if it is explicitly configured to do so - in other words, if it is configured with a redistribution rule where the source and destination filters both indicate the same RPM instance. One example use for this is to inform an instance of BGP which of its routes are active - see the definition of bgpRmAfiSafiAdvertiseInactive in the BGP MIB for more details." ::= { rtmObjects 2 } rtmRedistEntry OBJECT-TYPE SYNTAX RtmRedistEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information defining how routing information is redistributed to routing protocol managers (RPMs)by DC-RTM on its Routing Protocol Input interface. There are two key aspects to an entry in this table. Firstly, it contains a set of filters which determine whether or not the entry applies to a given pairing of a given set of routing information and a given destination RPM. There is a filter priority to determine which entry to use if there are multiple entries whose filters match a given pairing. Secondly, it contains parameters to use when redistributing the routing information to the destination RPM, including a flag which determines whether or not to redistribute at all." INDEX { rtmRedistFteIndex, rtmRedistEntryId } ::= { rtmRedistTable 1 } RtmRedistEntry ::= SEQUENCE { rtmRedistFteIndex FteIndex, rtmRedistEntryId Unsigned32, rtmRedistRowStatus RowStatus, rtmRedistAdminStat AdminStatus, rtmRedistPriority Integer32, rtmRedistInfoSrc InfoSourceDest, rtmRedistSrcInstFlt TruthValue, rtmRedistSrcInst FteIndex, rtmRedistInfoDest InfoSourceDest, rtmRedistDestInstFlt TruthValue, rtmRedistDestInst FteIndex, rtmRedistAddrFilterType InetAddressType, rtmRedistAddrFilter InetAddress, rtmRedistAddrFltLen Integer32, rtmRedistHopFltValType InetAddressType, rtmRedistHopFltVal InetAddress, rtmRedistHopFltLen Integer32, rtmRedistIfIndexFlt TruthValue, rtmRedistIfIndex Integer32, rtmRedistPathTypeFlt TruthValue, rtmRedistPathType PathType, rtmRedistOspfAreaFlt TruthValue, rtmRedistOspfArea IpAddress, rtmRedistOspfTagFlt TruthValue, rtmRedistOspfTag OspfTag, rtmRedistCommunityFlt TruthValue, rtmRedistCommunity BgpCommunity, rtmRedistExtCommFlt TruthValue, rtmRedistExtComm BgpExtendedCommunity, rtmRedistRedistFlag TruthValue, rtmRedistMetricConv MetricConversion, rtmRedistMetricValue Unsigned32, rtmRedistNwPathType PathType, rtmRedistNwOspfTag OspfTag, rtmRedistOspfPropagate TruthValue, rtmRedistAddCommunity TruthValue, rtmRedistNwCommunity BgpCommunity, rtmRedistAddExtComm TruthValue, rtmRedistNwExtComm BgpExtendedCommunity, rtmRedistNwOrigin BgpOriginCode, rtmRedistAddMed TruthValue, rtmRedistNwMed Integer32, rtmRedistAddLocalPref TruthValue, rtmRedistNwLocalPref Integer32, rtmRedistSetListId Unsigned32, rtmRedistAddAsLimUpper TruthValue, rtmRedistNwAsLimUpper Unsigned32, rtmRedistOspfVpnPeCeSupport TruthValue } rtmRedistFteIndex OBJECT-TYPE SYNTAX FteIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The HAF entity index identifying the instance of DC-RTM to which this redistribution table entry applies." ::= { rtmRedistEntry 1 } rtmRedistEntryId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of this DC-RTM redistribution table entry within the DC-RTM entity. This is an arbitrarily selected identifier." ::= { rtmRedistEntry 2 } rtmRedistRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Used to create and delete a DC-RTM redistribution table entry." ::= { rtmRedistEntry 3 } rtmRedistAdminStat OBJECT-TYPE SYNTAX AdminStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The administrative state of the redistribution table entry. The row status by itself does not indicate whether the redistribution is currently active. The row must be defined and the administrative status must be up. This enables a MIB agent to turn off a particular redistribution without deleting it from the table altogether." DEFVAL { adminStatusDown } ::= { rtmRedistEntry 4 } rtmRedistPriority OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The priority assigned to this table entry. The lower this value takes, the higher the priority of the entry. The priority takes effect when there is more than one entry in the table whose filters match a pairing of routing information and destination RPM." DEFVAL { '7FFFFFFF'h } ::= { rtmRedistEntry 5 } rtmRedistInfoSrc OBJECT-TYPE SYNTAX InfoSourceDest MAX-ACCESS read-create STATUS current DESCRIPTION "The source of the routing information. This is one of: - an RPM, joined to DC-RTM on the Routing Protocol Input interface - 'static' for statically defined routes, defined in the static routes table with path type ATG_QC_PATH_STATIC - 'connected' for routes to local IP addresses and directly connected IP addresses and subnets, learned via the I3 interface, or defined in the static route table with path type ATG_QC_PATH_CONNECTED - 'all', meaning that this entry applies to routes from all RPMs and static routes, but not routes learnt via the I3 interface - 'all-incl-connected', meaning that this entry applies to routes from all RPMs, static routes, and routes learnt via the I3 interface." DEFVAL { infoSourceAll } ::= { rtmRedistEntry 6 } rtmRedistSrcInstFlt OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies whether or not a source instance filter is in use. If it is not in use then this entry applies to all instances of the source RPM. The purpose of this filter is to allow an entry to apply to only one instance of the source RPM if more than one instance is active. The filter must always be off if the routing information source is set to 'all' or 'all-incl-connected'." DEFVAL { false } ::= { rtmRedistEntry 7 } rtmRedistSrcInst OBJECT-TYPE SYNTAX FteIndex MAX-ACCESS read-create STATUS current DESCRIPTION "Value of the source instance filter, if in use. If the filter is in use then do not match the source routing information to this entry if this filter value does not match the fault tolerant entity index of the RPM instance specified as the routing information source." DEFVAL { 0 } ::= { rtmRedistEntry 8 } rtmRedistInfoDest OBJECT-TYPE SYNTAX InfoSourceDest MAX-ACCESS read-create STATUS current DESCRIPTION "The destination of the routing information. This is usually an RPM, joined to DC-RTM on the Routing Protocol Input interface. It can also be set to 'all' or 'all-incl-connected', meaning that this entry applies to all routing information destinations." DEFVAL { infoSourceAll } ::= { rtmRedistEntry 9 } rtmRedistDestInstFlt OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies whether or not a destination instance filter is in use. If it is not in use then this entry applies to all instances of the destination RPM. The purpose of this filter is to allow an entry to apply to only one instance of the destination RPM if more than one instance is active. The filter must always be off if the routing information destination is 'all' or 'all-incl-connected'." DEFVAL { false } ::= { rtmRedistEntry 10 } rtmRedistDestInst OBJECT-TYPE SYNTAX FteIndex MAX-ACCESS read-create STATUS current DESCRIPTION "Value of the destination instance filter, if in use. If the filter is in use then do not redistribute this routing information to a given instance of an RPM if this filter value does not match the fault tolerant entity index of the RPM instance." DEFVAL { 0 } ::= { rtmRedistEntry 11 } rtmRedistAddrFilterType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of the address used as the destination address filter. This object must be set to the same value as rtmEntityAddressFamily, and this is its default value." ::= { rtmRedistEntry 12 } rtmRedistAddrFilter OBJECT-TYPE SYNTAX InetAddress (SIZE(4|16)) MAX-ACCESS read-create STATUS current DESCRIPTION "Destination IP address filter. Do not match the source routing information to this entry if one of these fails: - the destination IP address in the source routing information, with the IP address filter prefix length applied, matches the IP address filter with the IP address filter prefix length applied - the destination IP address prefix length is greater than or equal to the IP address filter prefix length. The IP address filter prefix length is given by the rtmRedistAddrFltLen object. Applying the prefix length to an address means taking the first rtmRedistAddrFltLen bits of the address. To avoid having any destination IP address filtering, set the IP address filter to all zeroes and the IP address filter prefix length to zero. The length of this IP address must be the address length for the family given by rtmEntityAddressFamily." ::= { rtmRedistEntry 13 } rtmRedistAddrFltLen OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Destination IP address filter prefix length (in bits). Do not match the source routing information to this entry if one of these fails: - the destination IP address in the source routing information, with the IP address filter prefix length applied, matches the IP address filter with the IP address filter prefix length applied - the destination IP address prefix length is greater than or equal to the IP address filter prefix length. If the IP address filter prefix length is L, then applying the length to an address means taking the first L bits of the address. To avoid having any destination IP address filtering, set the IP address filter to all zeroes and the IP address filter prefix length to zero." DEFVAL { 0 } ::= { rtmRedistEntry 14 } rtmRedistHopFltValType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of the address used as the next hop address filter. This object must be set to the same value as rtmEntityAddressFamily, and this is its default value." ::= { rtmRedistEntry 15 } rtmRedistHopFltVal OBJECT-TYPE SYNTAX InetAddress (SIZE(4|16)) MAX-ACCESS read-create STATUS current DESCRIPTION "Value of next hop filter. Do not match the source routing information to this entry if none of the next hop values in the source routing information, with the next hop filter prefix length applied, matches the next hop filter value with the next hop filter prefix length applied. The next hop filter prefix length is given by the rtmRedistHopFltLen object. Applying the prefix length to an address means taking the first rtmRedistHopFltLen bits of the address. To avoid having any next hop filtering, set the next hop filter to all zeroes and the next hop filter prefix length to zero. The length of this next hop filter must be the address length for the family given by rtmEntityAddressFamily." ::= { rtmRedistEntry 16 } rtmRedistHopFltLen OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Next hop filter prefix length. Do not match the source routing information to this entry if none of the next hop values in the source routing information, with the next hop filter prefix length applied, matches the next hop filter value with the next hop filter prefix length applied. If the next hop filter prefix length is L, then applying the length to an address means taking the first L bits of the address. To avoid having any next hop filtering, set the next hop filter to all zeroes and the next hop filter prefix length to zero." DEFVAL { 0 } ::= { rtmRedistEntry 17 } rtmRedistIfIndexFlt OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies whether or not an output network interface index filter is in use." DEFVAL { false } ::= { rtmRedistEntry 18 } rtmRedistIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Value of output network interface index filter, if in use. If the filter is in use then do not match the source routing information to this entry if none of the output network interface indexes in the source routing information matches this filter value." DEFVAL { 0 } ::= { rtmRedistEntry 19 } rtmRedistPathTypeFlt OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies whether or not a path type filter is in use. If it is not in use then this entry applies to all path type values. A path type filter can only be used if the routing information source filter _info_src_ is not set to 'all' or 'all-incl-connected'. The value of the path type filter, if used, must be one of the path types which matches the routing information source. For example, a path type filter of 'OSPF external type 1' can only be used if the routing information source filter is set to OSPF." DEFVAL { false } ::= { rtmRedistEntry 20 } rtmRedistPathType OBJECT-TYPE SYNTAX PathType MAX-ACCESS read-create STATUS current DESCRIPTION "Value of path type filter, if in use. If the filter is in use then do not match the source routing information to this entry if the path type in the source routing information does not match this filter value. A path type filter can only be used if the routing information source filter _info_src_ is not set to 'all' or 'all-incl-connected'. The value of the path type filter, if used, must be one of the path types which matches the routing information source. For example, a path type filter of 'OSPF external type 1' can only be used if the routing information source filter is set to OSPF." DEFVAL { pathTypeNone } ::= { rtmRedistEntry 21 } rtmRedistOspfAreaFlt OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies whether or not an OSPF area filter is in use. The filter can only be on if the routing information source field is OSPF." DEFVAL { false } ::= { rtmRedistEntry 22 } rtmRedistOspfArea OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Value of OSPF area filter, if in use. If the filter is in use then do not match the source routing information to this entry if the OSPF area ID in the information does not match this area ID." DEFVAL { '00000000'H } -- 0.0.0.0 ::= { rtmRedistEntry 23 } rtmRedistOspfTagFlt OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies whether or not an OSPF tag filter is in use. The filter can only be on if the routing information source field is OSPF." DEFVAL { false } ::= { rtmRedistEntry 24 } rtmRedistOspfTag OBJECT-TYPE SYNTAX OspfTag MAX-ACCESS read-create STATUS current DESCRIPTION "Value of OSPF tag filter, if in use. If the filter is in use then do not match the source routing information to this entry if the tag in the information does not match this tag." DEFVAL { 0 } ::= { rtmRedistEntry 25 } rtmRedistCommunityFlt OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies whether or not a BGP community number filter is in use. The filter can only be on if the routing information source field is BGP." DEFVAL { false } ::= { rtmRedistEntry 26 } rtmRedistCommunity OBJECT-TYPE SYNTAX BgpCommunity MAX-ACCESS read-create STATUS current DESCRIPTION "Value of BGP community number filter, if in use. If the filter is in use then do not match the source routing information to this entry if there is no match between one of the community numbers in the source routing information and the value of this filter." DEFVAL { '00000000'h } ::= { rtmRedistEntry 27 } rtmRedistExtCommFlt OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies whether or not a BGP extended community number filter is in use. The filter can only be on if the routing information source field is BGP." DEFVAL { false } ::= { rtmRedistEntry 28 } rtmRedistExtComm OBJECT-TYPE SYNTAX BgpExtendedCommunity MAX-ACCESS read-create STATUS current DESCRIPTION "Value of BGP extended community number filter, if in use. If the filter is in use then do not match the source routing information to this entry if there is no match between one of the extended community numbers in the source routing information and the value of this filter." DEFVAL { '0000000000000000'h } ::= { rtmRedistEntry 29 } rtmRedistRedistFlag OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Flag determining whether or not DC-RTM redistributes routing information from the given source to the given destination." DEFVAL { false } ::= { rtmRedistEntry 30 } rtmRedistMetricConv OBJECT-TYPE SYNTAX MetricConversion MAX-ACCESS read-create STATUS current DESCRIPTION "How to act on the value of the metric in the routing information received from the source to create a value for the metric in the routing information sent to the destination. This field is only used if the redistribution flag is TRUE." DEFVAL { metricConvSame } ::= { rtmRedistEntry 31 } rtmRedistMetricValue OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "Numerical parameter to use when creating a value for the metric in the routing information sent to the destination based on the supplied metric in the routing information received from the source. This field is only used if the redistribution flag is TRUE and the metric conversion field is set to 'constant', 'scale up', 'scale down' or 'truncate'. If the metric conversion field is 'constant' then the new metric value is just the value of the numerical parameter. If the metric conversion field is 'scale up' then the new metric value is the supplied metric multiplied by the value of the numerical parameter (or 0xffffffff if this is smaller). If the metric conversion method is 'scale down' then the new metric value is the supplied metric divided by the value of the numerical parameter (rounded down to the next integer). The numerical parameter cannot be zero in this case. If the metric conversion field is 'truncate' then the new metric value is the lower value of the supplied metric value and the numerical parameter." DEFVAL { 1 } ::= { rtmRedistEntry 32 } rtmRedistNwPathType OBJECT-TYPE SYNTAX PathType MAX-ACCESS read-create STATUS current DESCRIPTION "Type of path to set in routing information sent to destination. This field is only used if the redistribution flag is TRUE. If the information destination filter _info_dest_ is set to 'all' or 'all-incl-connected', the new path type must be set to 'none'. Otherwise it must be set either to 'none' or to a path type which matches the routing information destination filter. For example, a new path type of 'OSPF external type 1' can only be used if the routing information destination filter is set to OSPF." DEFVAL { pathTypeNone } ::= { rtmRedistEntry 33 } rtmRedistNwOspfTag OBJECT-TYPE SYNTAX OspfTag MAX-ACCESS read-create STATUS current DESCRIPTION "Value of OSPF tag to set in routing information sent to destination. This field is only used if the redistribution flag is TRUE and the destination for the routing information is OSPF or 'all' or 'all-incl-connected'." DEFVAL { 0 } ::= { rtmRedistEntry 34 } rtmRedistOspfPropagate OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Value of OSPF propagate flag to set in routing information sent to destination. This field is only used if the redistribution flag is TRUE and the destination for the routing information is OSPF or 'all' or 'all-incl-connected'." DEFVAL { true } ::= { rtmRedistEntry 35 } rtmRedistAddCommunity OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS obsolete DESCRIPTION "Flag determining whether or not DC-RTM adds a BGP community value in routing information sent to the destination. This field is only used if the redistribution flag is TRUE and the destination for the routing information is BGP or 'all' or 'all-incl-connected'." DEFVAL { false } ::= { rtmRedistEntry 36 } rtmRedistNwCommunity OBJECT-TYPE SYNTAX BgpCommunity MAX-ACCESS read-create STATUS obsolete DESCRIPTION "Value to use for BGP community number in routing information sent to the destination if the add community flag is TRUE. This field is only used if the redistribution flag is TRUE and the destination for the routing information is BGP or 'all' or 'all-incl-connected'." DEFVAL { '00000000'h } ::= { rtmRedistEntry 37 } rtmRedistAddExtComm OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS obsolete DESCRIPTION "Flag determining whether or not DC-RTM adds a BGP extended community value in routing information sent to the destination. This field is only used if the redistribution flag is TRUE and the destination for the routing information is BGP or 'all' or 'all-incl-connected'." DEFVAL { false } ::= { rtmRedistEntry 38 } rtmRedistNwExtComm OBJECT-TYPE SYNTAX BgpExtendedCommunity MAX-ACCESS read-create STATUS obsolete DESCRIPTION "Value to use for BGP extended community number in routing information sent to destination if the add extended community flag is TRUE. This field is only used if the redistribution flag is TRUE and the destination for the routing information is BGP or 'all' or 'all-incl-connected'." DEFVAL { '0000000000000000'h } ::= { rtmRedistEntry 39 } rtmRedistNwOrigin OBJECT-TYPE SYNTAX BgpOriginCode MAX-ACCESS read-create STATUS current DESCRIPTION "Value to use for the BGP origin code in the routing information sent to the destination. This field is only used if the redistribution flag is TRUE and the destination for the routing information is BGP or 'all' or 'all-incl-connected'." DEFVAL { bgpOriginIncomplete } ::= { rtmRedistEntry 40 } rtmRedistAddMed OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Flag determining whether or not DC-RTM adds a BGP Multi-Exit Discriminator value in routing information sent to the destination. This field is only used if the redistribution flag is TRUE and the destination for the routing information is BGP or 'all' or 'all-incl-connected'." DEFVAL { false } ::= { rtmRedistEntry 41 } rtmRedistNwMed OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Value to use for the BGP Multi-Exit Discriminator in the routing information sent to the destination of the add MED flag is TRUE. This field is only used if the redistribution flag is TRUE and the destination for the routing information is BGP or 'all' or 'all-incl-connected'." DEFVAL { 0 } ::= { rtmRedistEntry 42 } rtmRedistAddLocalPref OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Flag determining whether or not DC-RTM adds a BGP Local Preference value in routing information sent to the destination. This field is only used if the redistribution flag is TRUE and the destination for the routing information is BGP or 'all' or 'all-incl-connected'." DEFVAL { false } ::= { rtmRedistEntry 43 } rtmRedistNwLocalPref OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Value to use for the BGP Local Preference in the routing information sent to the destination if the add local pref flag is TRUE. This field is only used if the redistribution flag is TRUE and the destination for the routing information is BGP or 'all' or 'all-incl-connected'." DEFVAL { 0 } ::= { rtmRedistEntry 44 } rtmRedistSetListId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "List identifier for the list of set actions to apply. The list of set actions are defined in the rtmRdstSetFieldTable, and are the group of entries in that table with the rtmRdstSetFieldListId field equal to the list identifier specified here. This field is only used if the redistribution flag is TRUE. A value of 0 indicates no list is specified." DEFVAL { 0 } ::= { rtmRedistEntry 45 } rtmRedistAddAsLimUpper OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Flag determining whether or not DC-RTM adds a BGP AS_PATHLIMIT attribute upper bound value to routing information sent to the destination. The destination will automatically add the AS number part of the attribute. This field is only used if the redistribution flag is TRUE and the destination for the routing information is BGP or 'all' or 'all-incl-connected'." DEFVAL { false } ::= { rtmRedistEntry 46 } rtmRedistNwAsLimUpper OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "Value to use for the BGP AS_PATHLIMIT upper bound in the routing information sent to the destination if the rtmRedistAddAsLimUpper flag is TRUE. This field is only used if the redistribution flag is TRUE and the destination for the routing information is BGP or 'all' or 'all-incl-connected'." DEFVAL { 1 } ::= { rtmRedistEntry 47 } rtmRedistOspfVpnPeCeSupport OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Flag determining whether or not DC-RTM translates between OSPF routes and BGP routes in order to facilitate use of OSPF between provider edge (PE) routers and customer edge (CE) routers in a BGP/MPLS IP VPN. Setting this field to true enables translation between OSPF routes and BGP routes as described in RFC 4577 and draft-ietf-l3vpn-ospfv3-pece-07. This function should only be enabled for OSPF instances for customer VPNs on PE routers. It should be disabled for CE routers, and on PE routers it should be disabled for any OSPF instances for the provider backbone network. The translation between OSPF routes and BGP routes can be overridden by other fields in the redistribution table entry, including rtmRedistNwPathType, rtmRedistMetricConv, rtmRedistMetricValue, rtmRedistAddMed and rtmRedistNwMed. The translation between OSPF routes and BGP routes also depends on route translation performed by OSPF according to the OSPF Domain ID configuration. This field is only used if the redistribution flag is TRUE and the source or destination for the routing information include OSPF and BGP." DEFVAL { false } ::= { rtmRedistEntry 48 } ------------------------------------------------------------------------------- -- DC-RTM Static routes Table -- This table is used to create and manage DC-RTM static routes. rtmStaticRtTable OBJECT-TYPE -- FAMILY-SHORT-NAME qcr_strt SYNTAX SEQUENCE OF RtmStaticRtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of DC-RTM static routes." ::= { rtmObjects 3 } rtmStaticRtEntry OBJECT-TYPE SYNTAX RtmStaticRtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about static routes, containing next hop information or instruction to discard/reject matching packets." INDEX { rtmStaticRtFteIndex, rtmStaticRtDestAddrType, rtmStaticRtDestAddr, rtmStaticRtDestLen, rtmStaticRtNextHopType, rtmStaticRtNextHop, rtmStaticRtIfIndex } ::= { rtmStaticRtTable 1 } RtmStaticRtEntry ::= SEQUENCE { rtmStaticRtFteIndex FteIndex, rtmStaticRtDestAddrType InetAddressType, rtmStaticRtDestAddr InetAddress, rtmStaticRtDestLen Integer32, rtmStaticRtNextHopType InetAddressType, rtmStaticRtNextHop InetAddress, rtmStaticRtIfIndex Integer32, rtmStaticRtRowStatus RowStatus, rtmStaticRtAdminStat AdminStatus, rtmStaticRtOverride TruthValue, rtmStaticRtAdminDist AdminDistance, rtmStaticRtAction RouteAction, rtmStaticRtFwdAddrType InetAddressType, rtmStaticRtForwardingAddr InetAddress, rtmStaticRtPathType PathType, rtmStaticRtUsePathCost TruthValue, rtmStaticRtPathCost Unsigned32, rtmStaticRtUserData OCTET STRING, rtmStaticRtLooseNextHop TruthValue, rtmStaticRtBfdSupport RtmBfdSupport, rtmStaticRtBfdStatus BfdSessionStatus, rtmStaticRtInterfaceName DisplayString } rtmStaticRtFteIndex OBJECT-TYPE SYNTAX FteIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The HAF entity index identifying the instance of DC-RTM to which this static route entry applies." ::= { rtmStaticRtEntry 1 } rtmStaticRtDestAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The type of the address used as the destination internetwork address or subnet address. This object must be set to the same value as rtmEntityAddressFamily." ::= { rtmStaticRtEntry 2 } rtmStaticRtDestAddr OBJECT-TYPE SYNTAX InetAddress (SIZE(4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Destination internetwork address or subnet address. The destination prefix length is applied to this value, and to a particular destination address, to determine whether the route applies to the particular address. If the prefix length is L, then applying the length to an address means taking the first L bits of the address." ::= { rtmStaticRtEntry 3 } rtmStaticRtDestLen OBJECT-TYPE SYNTAX Integer32 (0..128) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Prefix length (in bits) to apply to the destination internetwork address or subnet address, to obtain the set of addresses to which this route applies. If the prefix length is L, then applying the length to an address means taking the first L bits of the address." ::= { rtmStaticRtEntry 4 } rtmStaticRtNextHopType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The type of the address used as the next-hop address for this route. This object must be set to the same value as rtmEntityAddressFamily, even if the rtmStaticRtNextHop object is set to all zeroes." ::= { rtmStaticRtEntry 5 } rtmStaticRtNextHop OBJECT-TYPE SYNTAX InetAddress (SIZE(4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The next-hop IP address, if any. If rtmStaticRtAction is 'forward', there may or may not be a next-hop IP address. A next-hop IP address is not required if an output interface index is specified (in other words, if rtmStaticRtIfIndex is non-zero). It is possible to supply a next-hop IP address, but to set the output interface index (rtmStaticRtIfIndex) to zero. In this case - the next hop is referred to as a loose next hop - the next-hop address does not need to be on a directly connected device - if DC-RTM cannot find a route to the specified next-hop address, it does not return the static route on the rtmRouteTable, it does not redistribute the static route to routing protocol managers, and it does not program the static route to a forwarding table (unless the forwarding table has registered to receive loose next hops) or to a partner that is querying route information (such as BGP or PIM). If rtmStaticRtAction is not 'forward', there is no next-hop IP address. If there is no next-hop IP address, the rtmStaticRtNextHop object is set to all zeroes." ::= { rtmStaticRtEntry 6 } rtmStaticRtIfIndex OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This field contains the network interface index, if any, of the output network interface used to reach the next hop. If rtmStaticRtAction is 'forward', rtmStaticIfIndex may or may not be set to zero. Setting it to zero indicates that the next hop is a loose next hop (see rtmStaticRtNextHop for details). In this case, DC-RTM will select a suitable output interface for packet forwarding. If rtmStaticRtAction is not 'forward', rtmStaticIfIndex must be set to zero." ::= { rtmStaticRtEntry 7 } rtmStaticRtRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Used to create and delete a DC-RTM static route." ::= { rtmStaticRtEntry 8 } rtmStaticRtAdminStat OBJECT-TYPE SYNTAX AdminStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The administrative state of the static route. The row status by itself does not indicate whether the static route definition is currently active. The row must be defined and the administrative status must be up. This enables a MIB agent to turn off a particular static route without deleting it from the table altogether." DEFVAL { adminStatusDown } ::= { rtmStaticRtEntry 9 } rtmStaticRtOverride OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The administrative distance for this route is by default taken to be the administrative distance configured in the DC-RTM entity table associated with the route's path type (rtmStaticRtPathType). If rtmStaticRtOverride is set to AMB_TRUE, this admin distance is overridden and we use the rtmStaticRtAdminDist instead. The lower the administrative distance for a given route, the more likely that route is to be used by DC-RTM as the active route for the given destination. See the DC-RTM Architecture Guide for more information about the use of administrative distances." DEFVAL { false } ::= { rtmStaticRtEntry 10 } rtmStaticRtAdminDist OBJECT-TYPE SYNTAX AdminDistance MAX-ACCESS read-create STATUS current DESCRIPTION "Administrative distance for static route, if overriding the default administrative distance for this route given in the DC-RTM entity table. This field is not defined if overriding is not being performed. The lower the administrative distance for a given route, the more likely that route is to be used by DC-RTM as the active route for the given destination. See the DC-RTM Architecture Guide for more information about the use of administrative distances." DEFVAL { 1 } ::= { rtmStaticRtEntry 11 } rtmStaticRtAction OBJECT-TYPE SYNTAX RouteAction MAX-ACCESS read-create STATUS current DESCRIPTION "The action to perform on receipt of a packet to the specified destination. If the action type is 'forward', one or both of the rtmStaticRtNextHop and rtmStaticRtIfIndex objects must be set to a non-zero value. If the action type is not 'forward', the rtmStaticRtNextHop and rtmStaticRtIfIndex objects must both be set to zero. The action type cannot be set to 'tunnel' for a static route. The value of this field must not be changed while the row status of this MIB is AMB_ROW_STATUS_ACTIVE." DEFVAL { routeActionForward } ::= { rtmStaticRtEntry 12 } rtmStaticRtFwdAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of the address used as the forwarding address for this route. This object must be set to the same value as rtmEntityAddressFamily." DEFVAL { ipv4 } ::= { rtmStaticRtEntry 13 } rtmStaticRtForwardingAddr OBJECT-TYPE SYNTAX InetAddress (SIZE(4|16)) MAX-ACCESS read-create STATUS current DESCRIPTION "Forwarding address to advertise for this route. The length of this field must match the length of the forwarding address type. A value of all zeros is treated the same as no forwarding address, and this is the default if no value is configured. The value of this field must not be changed while the row status of this MIB is AMB_ROW_STATUS_ACTIVE." ::= { rtmStaticRtEntry 14 } rtmStaticRtPathType OBJECT-TYPE SYNTAX PathType MAX-ACCESS read-create STATUS current DESCRIPTION "Type of path associated with this route." DEFVAL { pathTypeStatic } ::= { rtmStaticRtEntry 15 } rtmStaticRtUsePathCost OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The path cost for this route is by default set to be equal to the administrative distance (rtmStaticRtAdminDist) for the route. If rtmStaticRtUsePathCost is set to AMB_TRUE, this default value of the path cost is overridden and it is set to rtmStaticRtPathCost instead." DEFVAL { false } ::= { rtmStaticRtEntry 16 } rtmStaticRtPathCost OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "Path cost for this static route, if overriding the default setting. This field is not used if rtmStaticRtUsePathCost is set to AMB_FALSE. When deciding which path for a given route should be marked as active, the administrative distance is considered first. If multiple paths have the same administrative distance, the path with the lowest path cost is chosen as the active path. If multiple paths have the same path cost, one or more paths may be marked as active depending on the value of rtmEntityEqlCostOpt." ::= { rtmStaticRtEntry 17 } rtmStaticRtUserData OBJECT-TYPE SYNTAX OCTET STRING(SIZE (8)) MAX-ACCESS read-create STATUS current DESCRIPTION "User data for this static route. This user data is passed to the QCRT_USER_STATIC_RT_EVENT user exit." ::= { rtmStaticRtEntry 18 } rtmStaticRtLooseNextHop OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates whether this static route contains a loose next hop (see rtmStaticRtNextHop for details)." ::= { rtmStaticRtEntry 19 } rtmStaticRtBfdSupport OBJECT-TYPE SYNTAX RtmBfdSupport MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates whether DC-RTM should use BFD to check IP reachability to the static route's next hop. DC-RTM will only attempt to use BFD if rtmEntityBfdIndex is non-zero and the static route has rtmStaticRtAction set to 'forward' and rtmStaticRtNextHop set to a non-null IP address. This object should be set as follows. - Set to 'none' if BFD is not required for this static route. - Set to 'desired' if it is not known whether the next hop router supports BFD. DC-RTM will use BFD for reachability checking if BFD is able to contact the next hop router. If the BFD session fails, the static route will be removed from the forwarding table and will not be used for redistribution. - Set to 'required' if it is known that the next hop router supports BFD. DC-RTM will use BFD to check reachability of the next hop. If BFD is unable to contact the next hop router or if the BFD session fails, the static route will be removed from the forwarding table and will not be used for redistribution. The current state of the BFD session is indicated by rtmStaticRtBfdStatus." DEFVAL { desired } ::= { rtmStaticRtEntry 20 } rtmStaticRtBfdStatus OBJECT-TYPE SYNTAX BfdSessionStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The current BFD session state for this static route." ::= { rtmStaticRtEntry 21 } rtmStaticRtInterfaceName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "The textual name of the interface. The value of this object should be the name of the interface as assigned by the local device and should be suitable for use in commands entered at the device's 'console'. This might be a text name, such as 'le0' or a simple port number, such as '1', depending on the interface naming syntax of the device. It should be unique per logical interface. Set to null if not known. This field cannot be changed if the row is admin status up and row status active." ::= { rtmStaticRtEntry 22 } ------------------------------------------------------------------------------- -- -- DC-RTM Master Join Table. -- -- This table determines which master joins a DC-RTM entity makes. -- There is a table entry for each slave entity to which an instance of DC-RTM -- should join. At present, there are two distinct types of slave entity. -- Forwarding stub entities such as the IP Forwarding Stub, the Labelled -- Data Forwarding Stub and the Route Selection Manager receive route -- updates over the Active Routes Interface (ARI). The second type of entity -- are Routing Protocol Managers who use the ARI for querying routing -- information, and this includes BGP and PIM. -- rtmMjTable OBJECT-TYPE -- FAMILY-SHORT-NAME qrpm_mj SYNTAX SEQUENCE OF RtmMjEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table controls which entities DC-RTM should join to as master. Each join is represented by a row in this table. The status of each join is represented by a read-only object within each row." ::= { rtmObjects 4 } rtmMjEntry OBJECT-TYPE SYNTAX RtmMjEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents a join for which DC-RTM is master." INDEX { rtmMjRtmFteIndex, rtmMjSlaveFteId, rtmMjSlaveType } ::= { rtmMjTable 1 } RtmMjEntry ::= SEQUENCE { rtmMjRtmFteIndex FteIndex, rtmMjSlaveFteId FteIndex, rtmMjSlaveType AriPrtnrType, rtmMjIfType InterfaceType, rtmMjRowStatus RowStatus, rtmMjAdminStatus AdminStatus, rtmMjOperStatus OperStatus, rtmMjJoinStatus RtmMjStatus, rtmMjSafi InetSubAddressType } rtmMjRtmFteIndex OBJECT-TYPE SYNTAX FteIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The HAF entity index identifying the instance of DC-RTM to which this master join table entry applies." ::= { rtmMjEntry 1 } rtmMjSlaveFteId OBJECT-TYPE SYNTAX FteIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The HAF entity index identifying the instance of the slave entity to which this master join table entry applies. This index is used in the join user data, to enable FTI-specific code within System Manager to select a suitable slave entity instance." ::= { rtmMjEntry 2 } rtmMjSlaveType OBJECT-TYPE SYNTAX AriPrtnrType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The type of entity which the slave side of this join should be. This value is used in the join user data, to enable FTI-specific code within System Manager to select a suitable slave entity instance." ::= {rtmMjEntry 8 } rtmMjIfType OBJECT-TYPE SYNTAX InterfaceType MAX-ACCESS read-only STATUS current DESCRIPTION "Identifies the interface type for this master join." ::= { rtmMjEntry 3 } rtmMjRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status for this DC-RTM master join table entry, used to create and destroy table entries." ::= { rtmMjEntry 4 } rtmMjAdminStatus OBJECT-TYPE SYNTAX AdminStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The administrative status of this master join, used to start and stop the join." DEFVAL { adminStatusUp } ::= { rtmMjEntry 5 } rtmMjOperStatus OBJECT-TYPE SYNTAX OperStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The current operational status of this master join." ::= { rtmMjEntry 6 } rtmMjJoinStatus OBJECT-TYPE SYNTAX RtmMjStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The status of the master join." ::= { rtmMjEntry 7 } rtmMjSafi OBJECT-TYPE SYNTAX InetSubAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "Sub-address family indicating the type of routes that can be queried on the join. This field is only relevant for joins to BGP or PIM. Allowed values are none, unicast and multicast. An example use is where unicast and multicast topologies are different. In this scenario the system requires separate RTM instances to hold the unicast and multicast routing tables. In this case, ARI queries from PIM relate to the multicast routing table, but ARI queries from BGP could be either for the unicast or multicast routing table. If only a single sub-address family need be supported then this can be left with the default value of none. The value of this field must not be changed while the row status of this MIB is AMB_ROW_STATUS_ACTIVE and the admin status is AMB_ADMIN_STATUS_UP." DEFVAL { none } ::= { rtmMjEntry 9 } ------------------------------------------------------------------------------- -- -- DC-RTM Slave Join Table. -- -- This is a read-only table. It contains information on joins for which -- DC-RTM entities are acting as slaves. Each row in this table -- represents one slave join in a particular DC-RTM entity. At present -- the partner (master) entity on any slave join is a Routing Protocol -- Manager entity, and the interface is the Routing Protocol Input interface. -- rtmSjTable OBJECT-TYPE -- FAMILY-SHORT-NAME qrpm_sj SYNTAX SEQUENCE OF RtmSjEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains information on joins for which DC-RTM entities are acting as slaves. Each row in this table represents one slave join in a particular DC-RTM entity." ::= { rtmObjects 5 } rtmSjEntry OBJECT-TYPE SYNTAX RtmSjEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents a join for which DC-RTM is slave." INDEX { rtmSjRtmFteIndex, rtmSjRtmRpmIndex } ::= { rtmSjTable 1 } RtmSjEntry ::= SEQUENCE { rtmSjRtmFteIndex FteIndex, rtmSjRtmRpmIndex Integer32, rtmSjIfType InterfaceType, rtmSjMastFteType Integer32, rtmSjMastFteId FteIndex, rtmSjJoinStatus RtmSjStatus } rtmSjRtmFteIndex OBJECT-TYPE SYNTAX FteIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The HAF entity index identifying the instance of DC-RTM to which this slave join table entry applies." ::= { rtmSjEntry 1 } rtmSjRtmRpmIndex OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Internal index used by DC-RTM for this RPM." ::= { rtmSjEntry 2 } rtmSjIfType OBJECT-TYPE SYNTAX InterfaceType MAX-ACCESS read-only STATUS current DESCRIPTION "Identifies the interface type for this master join." ::= { rtmSjEntry 3 } rtmSjMastFteType OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Additional information about the type of master entity which created the join, where this is not uniquely defined by the interface type. For joins to Routing Protocol Managers using the Routing Protocol Input interface, this field contains the routing protocol type." ::= { rtmSjEntry 4 } rtmSjMastFteId OBJECT-TYPE SYNTAX FteIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The HAF entity index identifying the instance of the master entity to which this slave join table entry applies." ::= { rtmSjEntry 5 } rtmSjJoinStatus OBJECT-TYPE SYNTAX RtmSjStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The status of the slave join." ::= { rtmSjEntry 6 } ------------------------------------------------------------------------------- -- DC-RTM IP CIDR Route Table. Based on IP CIDR Route Table from RFC 2096. rtmRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF RtmRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This entity's IP Routing table. A route is present in this table if and only if it has been programmed to an Active Routes Interface consumer. This may be a consumer that asks for all route updates (such as a forwarding table), or it may be a consumer that queries information about specific routes (such as BGP or PIM)." REFERENCE "RFC 1213 Section 6.6, The IP Group" ::= { rtmObjects 6 } rtmRouteEntry OBJECT-TYPE SYNTAX RtmRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A particular route to a particular destina- tion, under a particular policy." INDEX { rtmRouteFteIndex, rtmRouteDestType, rtmRouteDest, rtmRouteDestLen, rtmRouteTos, rtmRouteNextHopType, rtmRouteNextHop, rtmRouteIfIndex } ::= { rtmRouteTable 1 } RtmRouteEntry ::= SEQUENCE { rtmRouteFteIndex FteIndex, rtmRouteStatus RowStatus, rtmRouteDestType InetAddressType, rtmRouteDest InetAddress, rtmRouteDestLen Integer32, rtmRouteTos Integer32, rtmRouteNextHopType InetAddressType, rtmRouteNextHop InetAddress, rtmRouteIfIndex Integer32, rtmRouteType RouteType, rtmRouteProto IANAipRouteProtocol, rtmRouteAge Integer32, rtmRouteInfo RouteInfo, rtmRouteNextHopAS Integer32, rtmRouteMetric1 Integer32, rtmRouteMetric2 Integer32, rtmRouteMetric3 Integer32, rtmRouteMetric4 Integer32, rtmRouteMetric5 Integer32, rtmRouteConnected TruthValue, rtmRouteXCIndex MplsIndexType, rtmRouteLocalDestIfIndex Integer32, rtmRouteAdminDistance AdminDistance, rtmRoutePathType PathType } rtmRouteFteIndex OBJECT-TYPE SYNTAX FteIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The HAF entity index identifying the instance of DC-RTM to which this static route entry applies." ::= { rtmRouteEntry 1 } rtmRouteStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The row status variable, used according to row installation and removal conventions." ::= { rtmRouteEntry 2 } rtmRouteDestType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The type of the address used as the destination IP address for this route." ::= { rtmRouteEntry 3 } rtmRouteDest OBJECT-TYPE SYNTAX InetAddress (SIZE(4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Destination internetwork address or subnet address. The destination prefix length is applied to this value, and to a particular destination address, to determine whether the route applies to the particular address. If the prefix length is L, then applying the length to an address means taking the first L bits of the address." ::= { rtmRouteEntry 4 } rtmRouteDestLen OBJECT-TYPE SYNTAX Integer32 (0..128) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Prefix length (in bits) to apply to the rtmRouteDest object, to obtain the set of addresses to which this route applies. If the prefix length is L, then applying the length to an address means taking the first L bits of the address." ::= { rtmRouteEntry 5 } -- The following convention is included for specification -- of TOS Field contents. At this time, the Host Requirements -- and the Router Requirements documents disagree on the width -- of the TOS field. This mapping describes the Router -- Requirements mapping, and leaves room to widen the TOS field -- without impact to fielded systems. rtmRouteTos OBJECT-TYPE SYNTAX Integer32 (0..15) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The policy specifier is the IP TOS Field. The encoding of IP TOS is as specified by the following convention. Zero indicates the default path if no more specific policy applies. +=====+=====+=====+=====+=====+=====+=====+=====+ | | | | | PRECEDENCE | TYPE OF SERVICE | 0 | | | | | +=====+=====+=====+=====+=====+=====+=====+=====+ IP TOS IP TOS Field Policy Field Policy Contents Code Contents Code 0 0 0 0 ==> 0 0 0 0 1 ==> 2 0 0 1 0 ==> 4 0 0 1 1 ==> 6 0 1 0 0 ==> 8 0 1 0 1 ==> 10 0 1 1 0 ==> 12 0 1 1 1 ==> 14 1 0 0 0 ==> 16 1 0 0 1 ==> 18 1 0 1 0 ==> 20 1 0 1 1 ==> 22 1 1 0 0 ==> 24 1 1 0 1 ==> 26 1 1 1 0 ==> 28 1 1 1 1 ==> 30 RTM always returns a default value of 0 for this field." ::= { rtmRouteEntry 6 } rtmRouteNextHopType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The type of the address used as the next-hop address for this route." ::= { rtmRouteEntry 7 } rtmRouteNextHop OBJECT-TYPE SYNTAX InetAddress (SIZE(4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "On remote routes, the address of the next system en route; Otherwise, zero." ::= { rtmRouteEntry 8 } rtmRouteIfIndex OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifIndex value which identifies the local interface through which the next hop of this route should be reached." ::= { rtmRouteEntry 9 } rtmRouteType OBJECT-TYPE SYNTAX RouteType MAX-ACCESS read-only STATUS current DESCRIPTION "The type of route. local(3) refers to a route for which the destination is a local IP address or for which the next hop is the final destination. This includes routes to local IP addresses and routes to directly connected IP addresses or subnets. remote(4) refers to a route for which the next hop is not the final destination. reject (2) refers to a route which, if matched, discards the message as unreachable. This is used in some protocols as a means of correctly aggregating routes." ::= { rtmRouteEntry 10 } rtmRouteProto OBJECT-TYPE SYNTAX IANAipRouteProtocol MAX-ACCESS read-only STATUS current DESCRIPTION "The routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support those protocols." ::= { rtmRouteEntry 11 } rtmRouteAge OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of 'too old' can be implied except through knowledge of the routing protocol by which the route was learned. This age is only accurate for entries which are less that 49 days old." DEFVAL { 0 } ::= { rtmRouteEntry 12 } rtmRouteInfo OBJECT-TYPE SYNTAX RouteInfo MAX-ACCESS read-only STATUS current DESCRIPTION "A reference to MIB definitions specific to the particular routing protocol which is responsible for this route, as determined by the value specified in the route's rtmRouteProto value. RTM returns the following. - For OSPF, an integer representation of the OID which is required by RFC 2096. - For ISIS, an integer representation of the types of route to IP reachable addresses." DEFVAL { none } ::= { rtmRouteEntry 13 } rtmRouteNextHopAS OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Autonomous System Number of the Next Hop. The semantics of this object are determined by the routing-protocol specified in the route's rtmRouteProto value. When this object is unknown or not relevant its value should be set to zero." DEFVAL { 0 } ::= { rtmRouteEntry 14 } rtmRouteMetric1 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's rtmRouteProto value. If this metric is not used, its value should be set to -1." DEFVAL { -1 } ::= { rtmRouteEntry 15 } rtmRouteMetric2 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's rtmRouteProto value. If this metric is not used, its value should be set to -1." DEFVAL { -1 } ::= { rtmRouteEntry 16 } rtmRouteMetric3 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's rtmRouteProto value. If this metric is not used, its value should be set to -1." DEFVAL { -1 } ::= { rtmRouteEntry 17 } rtmRouteMetric4 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's rtmRouteProto value. If this metric is not used, its value should be set to -1." DEFVAL { -1 } ::= { rtmRouteEntry 18 } rtmRouteMetric5 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's rtmRouteProto value. If this metric is not used, its value should be set to -1." DEFVAL { -1 } ::= { rtmRouteEntry 19 } rtmRouteConnected OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the route destination is directly connected. A directly connected route can be reached without going through any IP routers. Route destinations that are local IP addresses are not considered to be directly connected. This field can only be true if rtmRouteType is set to 'local'." ::= { rtmRouteEntry 20 } rtmRouteXCIndex OBJECT-TYPE SYNTAX MplsIndexType MAX-ACCESS read-only STATUS current DESCRIPTION "Index into mplsXCTable that identifies which cross- connect entry is associated with this route entry by containing the mplsXCIndex of that cross-connect entry. This field is only valid for a VPN BGP route where rtmRouteType is remote and rtmRouteProto is bgp. Where valid, a zero value for this field indicates that a label stack is not associated with this route entry. This can be the case because the label bindings have not yet been established, or because some change in the agent has removed them." REFERENCE "RFC 3813 - Multiprotocol Label Switching (MPLS) Label Switching Router (LSR) Management Information base (MIB), C. Srinivasan, A. Vishwanathan, and T. Nadeau, June 2004" ::= { rtmRouteEntry 21 } rtmRouteLocalDestIfIndex OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "If the route destination is a local IP address then this is the interface index that the local IP address is assigned to. Otherwise this field is zero." ::= { rtmRouteEntry 22 } rtmRouteAdminDistance OBJECT-TYPE SYNTAX AdminDistance MAX-ACCESS read-only STATUS current DESCRIPTION "Administrative distance for this route. The lower the administrative distance for a given route, the more likely that route is to be used by DC-RTM as the active route for the route destination, and hence the more likely the route is to appear in this MIB table. See the DC-RTM Architecture Guide for more information about the use of administrative distances." ::= { rtmRouteEntry 23 } rtmRoutePathType OBJECT-TYPE SYNTAX PathType MAX-ACCESS read-only STATUS current DESCRIPTION "Protocol specific path type. This field only has meaning if rtmRouteType is set to 'remote'. Otherwise it is set to 'none'." ::= { rtmRouteEntry 24 } ------------------------------------------------------------------------------- -- DC-RTM RIB Table. -- This table is used to examine the routes known to DC-RTM. rtmRibTable OBJECT-TYPE SYNTAX SEQUENCE OF RtmRibEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Read-only copy of this entity's Routing Information Base. This is the complete set of routes known by DC-RTM and is a superset of the routes accessible through the rtmRouteTable (which accesses only the active routes from the Forwarding Information Base)." ::= { rtmObjects 7 } rtmRibEntry OBJECT-TYPE SYNTAX RtmRibEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A particular entry in the Routing Information Base." INDEX { rtmRibFteIndex, rtmRibDestType, rtmRibDest, rtmRibDestLen, rtmRibTos, rtmRibNextHopType, rtmRibNextHop, rtmRibIfIndex, rtmRibProto, rtmRibRpmIndex } ::= { rtmRibTable 1 } RtmRibEntry ::= SEQUENCE { rtmRibFteIndex FteIndex, rtmRibStatus RowStatus, rtmRibDestType InetAddressType, rtmRibDest InetAddress, rtmRibDestLen Integer32, rtmRibTos Integer32, rtmRibNextHopType InetAddressType, rtmRibNextHop InetAddress, rtmRibIfIndex Integer32, rtmRibType RouteType, rtmRibProto IANAipRouteProtocol, rtmRibAge Integer32, rtmRibInfo RouteInfo, rtmRibNextHopAS Integer32, rtmRibMetric1 Integer32, rtmRibMetric2 Integer32, rtmRibMetric3 Integer32, rtmRibMetric4 Integer32, rtmRibMetric5 Integer32, rtmRibFibRoute TruthValue, rtmRibRpmIndex Integer32, rtmRibConnected TruthValue, rtmRibLooseNextHop TruthValue, rtmRibLocalDestIfIndex Integer32, rtmRibAdminDistance AdminDistance, rtmRibPathType PathType } rtmRibFteIndex OBJECT-TYPE SYNTAX FteIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The HAF entity index identifying the instance of DC-RTM to which this RIB entry applies." ::= { rtmRibEntry 1 } rtmRibStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The row status variable, used according to row installation and removal conventions." ::= { rtmRibEntry 2 } rtmRibDestType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The type of the address used as the destination IP address for this route." ::= { rtmRibEntry 3 } rtmRibDest OBJECT-TYPE SYNTAX InetAddress (SIZE(4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Destination internetwork address or subnet address. The destination prefix length is applied to this value, and to a particular destination address, to determine whether the route applies to the particular address. If the prefix length is L, then applying the length to an address means taking the first L bits of the address." ::= { rtmRibEntry 4 } rtmRibDestLen OBJECT-TYPE SYNTAX Integer32 (0..128) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Prefix length (in bits) to apply to the rtmRibDest object, to obtain the set of addresses to which this route applies. If the prefix length is L, then applying the length to an address means taking the first L bits of the address." ::= { rtmRibEntry 5 } -- The following convention is included for specification -- of TOS Field contents. At this time, the Host Requirements -- and the Router Requirements documents disagree on the width -- of the TOS field. This mapping describes the Router -- Requirements mapping, and leaves room to widen the TOS field -- without impact to fielded systems. rtmRibTos OBJECT-TYPE SYNTAX Integer32 (0..15) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The policy specifier is the IP TOS Field. The encoding of IP TOS is as specified by the following convention. Zero indicates the default path if no more specific policy applies. +=====+=====+=====+=====+=====+=====+=====+=====+ | | | | | PRECEDENCE | TYPE OF SERVICE | 0 | | | | | +=====+=====+=====+=====+=====+=====+=====+=====+ IP TOS IP TOS Field Policy Field Policy Contents Code Contents Code 0 0 0 0 ==> 0 0 0 0 1 ==> 2 0 0 1 0 ==> 4 0 0 1 1 ==> 6 0 1 0 0 ==> 8 0 1 0 1 ==> 10 0 1 1 0 ==> 12 0 1 1 1 ==> 14 1 0 0 0 ==> 16 1 0 0 1 ==> 18 1 0 1 0 ==> 20 1 0 1 1 ==> 22 1 1 0 0 ==> 24 1 1 0 1 ==> 26 1 1 1 0 ==> 28 1 1 1 1 ==> 30 RTM always returns a default value of 0 for this field." ::= { rtmRibEntry 6 } rtmRibNextHopType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The type of the address used as the next-hop address for this route." ::= { rtmRibEntry 7 } rtmRibNextHop OBJECT-TYPE SYNTAX InetAddress (SIZE(4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "On remote routes, the address of the next system en route; Otherwise, zero." ::= { rtmRibEntry 8 } rtmRibIfIndex OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifIndex value which identifies the local interface through which the next hop of this route should be reached." ::= { rtmRibEntry 9 } rtmRibType OBJECT-TYPE SYNTAX RouteType MAX-ACCESS read-only STATUS current DESCRIPTION "The type of route. local(3) refers to a route for which the destination is a local IP address or for which the next hop is the final destination. This includes routes to local IP addresses and routes to directly connected IP addresses or subnets. remote(4) refers to a route for which the next hop is not the final destination. reject (2) refers to a route which, if matched, discards the message as unreachable. This is used in some protocols as a means of correctly aggregating routes." ::= { rtmRibEntry 10 } rtmRibProto OBJECT-TYPE SYNTAX IANAipRouteProtocol MAX-ACCESS not-accessible STATUS current DESCRIPTION "The routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support those protocols." ::= { rtmRibEntry 11 } rtmRibAge OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of 'too old' can be implied except through knowledge of the routing protocol by which the route was learned. This age is only accurate for entries which are less that 49 days old." DEFVAL { 0 } ::= { rtmRibEntry 12 } rtmRibInfo OBJECT-TYPE SYNTAX RouteInfo MAX-ACCESS read-only STATUS current DESCRIPTION "A reference to MIB definitions specific to the particular routing protocol which is responsible for this route, as determined by the value specified in the route's rtmRibProto value. RTM returns the following. - For OSPF, an integer representation of the OID which is required by RFC 2096. - For ISIS, an integer representation of the types of route to IP reachable addresses." DEFVAL { none } ::= { rtmRibEntry 13 } rtmRibNextHopAS OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Autonomous System Number of the Next Hop. The semantics of this object are determined by the routing-protocol specified in the route's rtmRibProto value. When this object is unknown or not relevant its value is returned as zero." DEFVAL { 0 } ::= { rtmRibEntry 14 } rtmRibMetric1 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's rtmRibProto value. If this metric is not used, its value is returned as -1." DEFVAL { -1 } ::= { rtmRibEntry 15 } rtmRibMetric2 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's rtmRibProto value. If this metric is not used, its value is returned as -1." DEFVAL { -1 } ::= { rtmRibEntry 16 } rtmRibMetric3 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's rtmRibProto value. If this metric is not used, its value is returned as -1." DEFVAL { -1 } ::= { rtmRibEntry 17 } rtmRibMetric4 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's rtmRibProto value. If this metric is not used, its value is returned as -1." DEFVAL { -1 } ::= { rtmRibEntry 18 } rtmRibMetric5 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's rtmRibProto value. If this metric is not used, its value is returned as -1." DEFVAL { -1 } ::= { rtmRibEntry 19 } rtmRibFibRoute OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Flag indicating whether or not this route has been programmed either to a forwarding table, or to a partner that queries route information (such as BGP or PIM). If there is no forwarding table and no partners are querying route information then this object is set to 'false' for every route. If this route has rtmRibLooseNextHop set to 'true', it is possible that RTM knows of more than one explicit next hop to the loose next hop address. If so, RTM programs these explicit next hops separately to a forwarding table (unless the forwarding table registers to receive loose next hops) and to a partner that queries route information; in this case the rtmRibFibRoute flag is set to 'true' if and only if one or more of these explicit next hops has been programmed." ::= { rtmRibEntry 20 } rtmRibRpmIndex OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The HAF entity index for the RPM that supplied this route, or zero for static routes or automatically configured routes. This is used to distinguish routes in the system where multiple copies of a given protocol (for example BGP) are providing routes to DC-RTM." ::= { rtmRibEntry 21 } rtmRibConnected OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the route destination is directly connected. A directly connected route can be reached without going through any IP routers. Route destinations that are local IP addresses are not considered to be directly connected. This field can only be true if rtmRibType is set to 'local'." ::= { rtmRibEntry 22 } rtmRibLooseNextHop OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This flag indicates whether DC-RTM considers that the next-hop address for this route is a loose next hop. If DC-RTM sets this object to 'true' then - it must also have set rtmRibType to 'remote' - the next-hop address (rtmRibNextHop) may not be on a directly connected device - if DC-RTM cannot find a route to the next-hop address, it does not return the route on the rtmRouteTable, it does not redistribute the route to routing protocol managers, and it does not program the route to a forwarding table (unless the forwarding table has registered to receive loose next hops) or to a partner that is querying route information (such as BGP or PIM)." ::= { rtmRibEntry 23 } rtmRibLocalDestIfIndex OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "If the route destination is a local IP address then this is the interface index that the local IP address is assigned to. Otherwise this field is zero." ::= { rtmRibEntry 24 } rtmRibAdminDistance OBJECT-TYPE SYNTAX AdminDistance MAX-ACCESS read-only STATUS current DESCRIPTION "Administrative distance for this route. The lower the administrative distance for a given route, the more likely that route is to be used by DC-RTM as the active route for the route destination. See the DC-RTM Architecture Guide for more information about the use of administrative distances." ::= { rtmRibEntry 25 } rtmRibPathType OBJECT-TYPE SYNTAX PathType MAX-ACCESS read-only STATUS current DESCRIPTION "Protocol specific path type. This field only has meaning if rtmRibType is set to 'remote'. Otherwise it is set to 'none'." ::= { rtmRibEntry 26 } ------------------------------------------------------------------------------- -- DC-RTM Redist Set Field Table. -- Table of actions which set fields for routes being redistributed. rtmRdstSetFieldTable OBJECT-TYPE SYNTAX SEQUENCE OF RtmRdstSetFieldEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table defines route attributes which are to be set by redistribution filters. A list of set actions is made up of one or more entries in this table with the same list_id. Actions in a list are applied in increasing set_number order. Each list may be referenced by 0, 1 or more redistribution entries. Only actions which are active at the point where the redistribution entry is being evaluated (i.e. at the point where the route is actually being redistributed) are applied. Also, only those set actions which are relevant to the route being redistributed are applied, so BGP attributes will not be set for a route being redistributed to OSPF." ::= { rtmObjects 8 } rtmRdstSetFieldEntry OBJECT-TYPE SYNTAX RtmRdstSetFieldEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A particular entry in the Redistribution Set Field table." INDEX { rtmRdstSetFieldFteIndex, rtmRdstSetFieldListId, rtmRdstSetFieldNumber } ::= { rtmRdstSetFieldTable 1 } RtmRdstSetFieldEntry ::= SEQUENCE { rtmRdstSetFieldFteIndex FteIndex, rtmRdstSetFieldListId Unsigned32, rtmRdstSetFieldNumber Unsigned32, rtmRdstSetFieldRowStatus RowStatus, rtmRdstSetFieldType RdstSetFieldType, rtmRdstSetFieldValue OCTET STRING } rtmRdstSetFieldFteIndex OBJECT-TYPE SYNTAX FteIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The HAF entity index identifying the instance of DC-RTM to which this set field entry applies." ::= { rtmRdstSetFieldEntry 1 } rtmRdstSetFieldListId OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of the list of set actions which this action belongs to. It is this identifier which is referenced by the redistribution table entry. A value of 0 is not permitted." ::= { rtmRdstSetFieldEntry 2 } rtmRdstSetFieldNumber OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Identifies this set field entry's position in the list of set field entries with the same list identifier." ::= { rtmRdstSetFieldEntry 3 } rtmRdstSetFieldRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Used to create and delete a DC-RTM set field table entry." ::= { rtmRdstSetFieldEntry 4 } rtmRdstSetFieldType OBJECT-TYPE SYNTAX RdstSetFieldType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of field set by this set field entry." ::= { rtmRdstSetFieldEntry 5 } rtmRdstSetFieldValue OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..8)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value set by this set field entry." ::= { rtmRdstSetFieldEntry 6 } ------------------------------------------------------------------------------- -- Router Definition Table. -- Table for global system router ID setting. rtmRouterDefinitionTable OBJECT-TYPE SYNTAX SEQUENCE OF RtmRouterDefinitionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table defines router ID which is stable IP address of the advertising router that is always reachable if there is any connectivity to it." ::= { rtmObjects 9 } rtmRouterDefinitionEntry OBJECT-TYPE SYNTAX RtmRouterDefinitionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A particular entry in the Router Definition table." INDEX { rtmEntityFteIndex } ::= { rtmRouterDefinitionTable 1 } RtmRouterDefinitionEntry ::= SEQUENCE { rtmRouterDefinitionFteIndex FteIndex, rtmRouterDefinitionRowStatus RowStatus, rtmRouterDefinitionRouterId RouterID } rtmRouterDefinitionFteIndex OBJECT-TYPE SYNTAX FteIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The HAF entity index identifying the instance of DC-RTM to which this set field entry applies." ::= { rtmRouterDefinitionEntry 1 } rtmRouterDefinitionRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Used to create and delete a DC-RTM Router Definition table entry." ::= { rtmRouterDefinitionEntry 2 } rtmRouterDefinitionRouterId OBJECT-TYPE SYNTAX RouterID MAX-ACCESS read-write STATUS current DESCRIPTION "The configured global system Router ID. This is a 32-bit integer uniquely identifying the router in the Autonomous System." DEFVAL { '00000000'H } -- 0.0.0.0 ::= { rtmRouterDefinitionEntry 3 } -- Conformance Information. rtmConformance OBJECT IDENTIFIER ::= { rtmMib 3 } rtmCompliances OBJECT IDENTIFIER ::= { rtmConformance 1 } rtmGroups OBJECT IDENTIFIER ::= { rtmConformance 2 } rtmCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for the DC-RTM module." MODULE MANDATORY-GROUPS { rtmEntityMandatoryGroup, rtmRedistMandatoryGroup, rtmStaticRtMandatoryGroup, rtmMjMandatoryGroup, rtmSjMandatoryGroup, rtmRdstSetFieldMandatoryGroup, rtmNotificationObjectGroup, rtmNotificationEventGroup, rtmRouterDefinitionMandatoryGroup } GROUP rtmEntityGroup DESCRIPTION "Optional objects for rtmEntityTable." GROUP rtmRedistGroup DESCRIPTION "Optional objects for rtmRedistTable." GROUP rtmStaticRtGroup DESCRIPTION "Optional objects for rtmStaticRtTable." GROUP rtmMjGroup DESCRIPTION "Optional objects for rtmMjTable." GROUP rtmSjGroup DESCRIPTION "Optional objects for rtmSjTable." GROUP rtmRouteGroup DESCRIPTION "Optional objects for rtmRouteTable." GROUP rtmRibGroup DESCRIPTION "Optional objects for rtmRibTable." ::= { rtmCompliances 1 } -- Units of conformance (Groups). rtmEntityMandatoryGroup OBJECT-GROUP OBJECTS { rtmEntityRowStatus } STATUS current DESCRIPTION "Mandatory objects for the rtmEntityTable." ::= { rtmGroups 1 } rtmEntityGroup OBJECT-GROUP OBJECTS { rtmEntityAdminStat, rtmEntityOperStatus, rtmEntityDsConnctd, rtmEntityDsStatDf, rtmEntityDsOspfInt, rtmEntityDsOspfExt, rtmEntityDsIntBgp, rtmEntityDsExtBgp, rtmEntityDsIsisInt1, rtmEntityDsIsisInt2, rtmEntityDsIsisExt1, rtmEntityDsIsisExt2, rtmEntityDsRip, rtmEntityDsEgp, rtmEntityDsGgp, rtmEntityDsHello, rtmEntityDsEsis, rtmEntityDsBbnspfigp, rtmEntityDsIdpr, rtmEntityDsIgrp, rtmEntityDsEigrpSmm, rtmEntityDsIntEigrp, rtmEntityDsEigrpExt, rtmEntityDsUnknown, rtmEntityEqlCostOpt, rtmEntityDelDeadRte, rtmEntityDeadRpmTmr, rtmEntityRouteNumber, rtmEntityAddressFamily, rtmEntityDsDvmrp, rtmEntityI3Index, rtmEntityI3JoinStatus, rtmEntityPartnerWaitTime, rtmEntityStartupTime, rtmEntityRestartTime, rtmEntityFtStateRetained, rtmEntityUseUnidirectionalLinks, rtmEntityBfdIndex, rtmEntityBfdJoinStatus, rtmEntityEnableTrapSupport, rtmEntityDisplayLocalAddrs, rtmEntityRestarting, rtmEntityRestartTimeLeft, rtmEntityRestartExitReason } STATUS current DESCRIPTION "Optional objects for rtmEntityTable." ::= { rtmGroups 2 } rtmRedistMandatoryGroup OBJECT-GROUP OBJECTS { rtmRedistRowStatus } STATUS current DESCRIPTION "Mandatory objects for rtmRedistTable." ::= { rtmGroups 3 } rtmRedistGroup OBJECT-GROUP OBJECTS { rtmRedistAdminStat, rtmRedistPriority, rtmRedistInfoSrc, rtmRedistSrcInstFlt, rtmRedistSrcInst, rtmRedistInfoDest, rtmRedistDestInstFlt, rtmRedistDestInst, rtmRedistAddrFilterType, rtmRedistAddrFilter, rtmRedistAddrFltLen, rtmRedistHopFltValType, rtmRedistHopFltVal, rtmRedistHopFltLen, rtmRedistIfIndexFlt, rtmRedistIfIndex, rtmRedistPathTypeFlt, rtmRedistPathType, rtmRedistOspfAreaFlt, rtmRedistOspfArea, rtmRedistOspfTagFlt, rtmRedistOspfTag, rtmRedistCommunityFlt, rtmRedistCommunity, rtmRedistExtCommFlt, rtmRedistExtComm, rtmRedistRedistFlag, rtmRedistMetricConv, rtmRedistMetricValue, rtmRedistNwPathType, rtmRedistNwOspfTag, rtmRedistOspfPropagate, rtmRedistNwOrigin, rtmRedistAddMed, rtmRedistNwMed, rtmRedistAddLocalPref, rtmRedistNwLocalPref, rtmRedistSetListId, rtmRedistAddAsLimUpper, rtmRedistNwAsLimUpper, rtmRedistOspfVpnPeCeSupport } STATUS current DESCRIPTION "Optional objects for rtmRedistTable." ::= { rtmGroups 4 } rtmStaticRtMandatoryGroup OBJECT-GROUP OBJECTS { rtmStaticRtRowStatus } STATUS current DESCRIPTION "Mandatory objects for rtmStaticRtTable." ::= { rtmGroups 5 } rtmStaticRtGroup OBJECT-GROUP OBJECTS { rtmStaticRtAdminStat, rtmStaticRtOverride, rtmStaticRtAdminDist, rtmStaticRtAction, rtmStaticRtFwdAddrType, rtmStaticRtForwardingAddr, rtmStaticRtPathType, rtmStaticRtUsePathCost, rtmStaticRtPathCost, rtmStaticRtUserData, rtmStaticRtLooseNextHop, rtmStaticRtBfdSupport, rtmStaticRtBfdStatus, rtmStaticRtInterfaceName } STATUS current DESCRIPTION "Optional objects for rtmStaticRtTable." ::= { rtmGroups 6 } rtmMjMandatoryGroup OBJECT-GROUP OBJECTS { rtmMjRowStatus } STATUS current DESCRIPTION "Mandatory objects for rtmMjTable." ::= { rtmGroups 7 } rtmMjGroup OBJECT-GROUP OBJECTS { rtmMjIfType, rtmMjAdminStatus, rtmMjOperStatus, rtmMjJoinStatus, rtmMjSafi } STATUS current DESCRIPTION "Optional objects for rtmMjTable." ::= { rtmGroups 8 } rtmSjMandatoryGroup OBJECT-GROUP OBJECTS { rtmSjIfType, rtmSjMastFteType, rtmSjMastFteId } STATUS current DESCRIPTION "Mandatory objects for rtmSjTable." ::= { rtmGroups 9 } rtmSjGroup OBJECT-GROUP OBJECTS { rtmSjJoinStatus } STATUS current DESCRIPTION "Optional objects for rtmSjTable." ::= { rtmGroups 10 } rtmRouteGroup OBJECT-GROUP OBJECTS { rtmRouteStatus, rtmRouteType, rtmRouteProto, rtmRouteAge, rtmRouteInfo, rtmRouteNextHopAS, rtmRouteMetric1, rtmRouteMetric2, rtmRouteMetric3, rtmRouteMetric4, rtmRouteMetric5, rtmRouteConnected, rtmRouteXCIndex, rtmRouteLocalDestIfIndex, rtmRouteAdminDistance, rtmRoutePathType } STATUS current DESCRIPTION "Optional objects for rtmRouteTable." ::= { rtmGroups 11 } rtmRibGroup OBJECT-GROUP OBJECTS { rtmRibStatus, rtmRibType, rtmRibAge, rtmRibInfo, rtmRibNextHopAS, rtmRibMetric1, rtmRibMetric2, rtmRibMetric3, rtmRibMetric4, rtmRibMetric5, rtmRibFibRoute, rtmRibConnected, rtmRibLooseNextHop, rtmRibLocalDestIfIndex, rtmRibAdminDistance, rtmRibPathType } STATUS current DESCRIPTION "Optional objects for rtmRibTable." ::= { rtmGroups 12 } rtmObsoleteGroup OBJECT-GROUP OBJECTS { rtmRedistAddCommunity, rtmRedistNwCommunity, rtmRedistAddExtComm, rtmRedistNwExtComm } STATUS obsolete DESCRIPTION "This group contains obsolete objects." ::= { rtmGroups 13 } rtmRdstSetFieldMandatoryGroup OBJECT-GROUP OBJECTS { rtmRdstSetFieldRowStatus, rtmRdstSetFieldType, rtmRdstSetFieldValue } STATUS current DESCRIPTION "Mandatory objects for rtmRdstSetFieldTable." ::= { rtmGroups 14 } rtmNotificationObjectGroup OBJECT-GROUP OBJECTS { rtmStaticRtTrapReason, rtmPathTrapReason, rtmTrapEntityFteIndex, rtmTrapStaticRtDestAddrType, rtmTrapStaticRtDestAddr, rtmTrapStaticRtDestLen, rtmTrapStaticRtNextHopType, rtmTrapStaticRtNextHop, rtmTrapStaticRtIfIndex, rtmTrapRibDestType, rtmTrapRibDest, rtmTrapRibDestLen, rtmTrapRibTos, rtmTrapRibNextHopType, rtmTrapRibNextHop, rtmTrapRibIfIndex, rtmTrapRibProto, rtmTrapRibRpmIndex } STATUS current DESCRIPTION "The objects used to record notification parameters." ::= { rtmGroups 15 } rtmRouterDefinitionMandatoryGroup OBJECT-GROUP OBJECTS { rtmRouterDefinitionRowStatus, rtmRouterDefinitionRouterId } STATUS current DESCRIPTION "Mandatory objects for rtmRouterDefinitionTable." ::= { rtmGroups 17 } -- Trap Support Objects -- The following are support objects for the RTM traps. rtmTraps OBJECT IDENTIFIER ::= { rtmTrap 0 } rtmTrapControl OBJECT IDENTIFIER ::= { rtmTrap 1 } rtmStaticRtTrapReason OBJECT-TYPE SYNTAX INTEGER { eligible (1), ineligible (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Event that caused the trap to be made. Used by the rtmStaticRouteChange trap." ::= { rtmTrapControl 1 } rtmPathTrapReason OBJECT-TYPE SYNTAX INTEGER { active (1), inactive (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Event that caused the trap to be made. Used by the rtmPathActivityChange trap." ::= { rtmTrapControl 2 } rtmTrapEntityFteIndex OBJECT-TYPE SYNTAX FteIndex MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Version of rtmEntityFteIndex used for traps." ::= { rtmTrapControl 3 } rtmTrapStaticRtDestAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Version of rtmStaticRtDestAddrType used for traps." ::= { rtmTrapControl 4 } rtmTrapStaticRtDestAddr OBJECT-TYPE SYNTAX InetAddress (SIZE(4|16)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Version of rtmStaticRtDestAddr used for traps." ::= { rtmTrapControl 5 } rtmTrapStaticRtDestLen OBJECT-TYPE SYNTAX Integer32 (0..128) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Version of rtmStaticRtDestLen used for traps." ::= { rtmTrapControl 6 } rtmTrapStaticRtNextHopType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Version of rtmStaticRtNextHopType used for traps." ::= { rtmTrapControl 7 } rtmTrapStaticRtNextHop OBJECT-TYPE SYNTAX InetAddress (SIZE(4|16)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Version of rtmStaticRtNextHop used for traps." ::= { rtmTrapControl 8 } rtmTrapStaticRtIfIndex OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Version of rtmStaticRtIfIndex used for traps." ::= { rtmTrapControl 9 } rtmTrapRibDestType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Version of rtmRibDestType used for traps." ::= { rtmTrapControl 10 } rtmTrapRibDest OBJECT-TYPE SYNTAX InetAddress (SIZE(4|16)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Version of rtmRibDest used for traps." ::= { rtmTrapControl 11 } rtmTrapRibDestLen OBJECT-TYPE SYNTAX Integer32 (0..128) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Version of rtmRibDestLen used for traps." ::= { rtmTrapControl 12 } rtmTrapRibTos OBJECT-TYPE SYNTAX Integer32 (0..15) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Version of rtmRibTos used for traps." ::= { rtmTrapControl 13 } rtmTrapRibNextHopType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Version of rtmRibNextHopType used for traps." ::= { rtmTrapControl 14 } rtmTrapRibNextHop OBJECT-TYPE SYNTAX InetAddress (SIZE(4|16)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Version of rtmRibNextHop used for traps." ::= { rtmTrapControl 15 } rtmTrapRibIfIndex OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Version of rtmRibIfIndex used for traps." ::= { rtmTrapControl 16 } rtmTrapRibProto OBJECT-TYPE SYNTAX IANAipRouteProtocol MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Version of rtmRibProto used for traps." ::= { rtmTrapControl 17 } rtmTrapRibRpmIndex OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Version of rtmRibRpmIndex used for traps." ::= { rtmTrapControl 18 } -- Traps rtmOperStateChange NOTIFICATION-TYPE OBJECTS { rtmTrapEntityFteIndex, rtmEntityOperStatus } STATUS current DESCRIPTION "DC-RTM generates this trap when the operational state of RTM enters 'up', 'down' or 'act_failed' state." ::= { rtmTraps 1 } rtmStaticRouteChange NOTIFICATION-TYPE OBJECTS { rtmTrapEntityFteIndex, rtmTrapStaticRtDestAddrType, rtmTrapStaticRtDestAddr, rtmTrapStaticRtDestLen, rtmTrapStaticRtNextHopType, rtmTrapStaticRtNextHop, rtmTrapStaticRtIfIndex, rtmStaticRtTrapReason, rtmStaticRtBfdSupport, rtmStaticRtBfdStatus } STATUS current DESCRIPTION "DC-RTM generates this trap when a static route becomes eligible or ineligible for installation in the FIB." ::= { rtmTraps 2 } rtmPathActivityChange NOTIFICATION-TYPE OBJECTS { rtmTrapEntityFteIndex, rtmTrapRibDestType, rtmTrapRibDest, rtmTrapRibDestLen, rtmTrapRibTos, rtmTrapRibNextHopType, rtmTrapRibNextHop, rtmTrapRibIfIndex, rtmTrapRibProto, rtmTrapRibRpmIndex, rtmPathTrapReason } STATUS current DESCRIPTION "DC-RTM generates this trap when a path becomes active or inactive." ::= { rtmTraps 3 } rtmNotificationEventGroup NOTIFICATION-GROUP NOTIFICATIONS { rtmOperStateChange, rtmStaticRouteChange, rtmPathActivityChange } STATUS current DESCRIPTION "A grouping of RTM trap events, as specified in NOTIFICATION-TYPE constructs." ::= { rtmGroups 16 } END