DC-RSVP-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, enterprises, Integer32, Unsigned32, IpAddress FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF TEXTUAL-CONVENTION, RowStatus, TruthValue, DisplayString FROM SNMPv2-TC InterfaceIndexOrZero FROM IF-MIB Ipv6Address FROM IPV6-TC NumericIndexOrZero FROM DC-MASTER-TC; dcRsvp MODULE-IDENTITY LAST-UPDATED "201412210000Z" -- December 21, 2014 ORGANIZATION "MRV Communications." CONTACT-INFO "For technical support, please contact your service channel" DESCRIPTION "The MIB module for management of the DC-RSVP product." -- Revision history REVISION "201412210000Z" -- December 21, 2014 DESCRIPTION "Initial edition." ::= { opx 6 } nbase OBJECT IDENTIFIER ::= { enterprises 629 } opx OBJECT IDENTIFIER ::= { nbase 10 } dcRsvpObjects OBJECT IDENTIFIER ::= { dcRsvp 1 } -- tables -- Textual conventions DcRsvpAdminStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The desired administrative state of an RSVP entity." SYNTAX INTEGER { adminStatusUp(1), adminStatusDown(2) } DcRsvpOperStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The current operational state of an RSVP entity." SYNTAX INTEGER { operStatusUp(1), -- active operStatusDown(2), -- inactive operStatusGoingUp(3), -- activating operStatusGoingDown(4), -- deactivating operStatusActFailed(5) -- activation failed } DcRsvpIndex ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The index value identifying an RSVP entity." SYNTAX Unsigned32 DcRsvpDiagReqIndex ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The index value identifying an RSVP session that is being diagnosed." SYNTAX Unsigned32 DcRsvpDiagNodeIndexType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The index value identifying a node within an RSVP session that is being diagnosed." SYNTAX Unsigned32 DcRsvpDiagNodeTypeVal ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The type of a node in a session that is being diagnosed." SYNTAX INTEGER { missing(1), -- no information received ingress(2), -- the ingress node transit(3), -- an intermediate node egress(4) -- the egress node } DcRsvpIfRefreshOption ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The level of refresh reduction support to be configured on this interface." SYNTAX Unsigned32 { no(0), -- refresh reduction not supported srefreshMsgs(1), -- SRefresh supported bundleSendMsgs(2), -- bundle messages supported noReqAck(4) -- acks not requested } -- End of textual conventions -- RSVP entity table -- This table is used to create and manage RSVP entities. dcRsvpProductTable OBJECT-TYPE SYNTAX SEQUENCE OF DcRsvpProductEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of active instances of DC-RSVP. The number of fields in this table is equal to AMB_OID_RSVP_PROD_MAX." ::= { dcRsvpObjects 1 } dcRsvpProductEntry OBJECT-TYPE SYNTAX DcRsvpProductEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry represents an RSVP entity." INDEX { dcRsvpProductIndex } ::= { dcRsvpProductTable 1 } DcRsvpProductEntry ::= SEQUENCE { dcRsvpProductIndex DcRsvpIndex, dcRsvpProductASNumber Integer32, dcRsvpProductSenderTTL Integer32, dcRsvpProductMinTimerPeriod Integer32, dcRsvpProductAPIIfIndex InterfaceIndexOrZero, dcRsvpProductAPIAddress OCTET STRING, dcRsvpProductAPIRefreshInterval Integer32, dcRsvpProductLocalRepairDelay Integer32, dcRsvpProductRefreshInterval Integer32, dcRsvpProductRefreshMultiple Integer32, dcRsvpProductRfrshSlewDenom Integer32, dcRsvpProductRfrshSlewNumerator Integer32, dcRsvpProductBlockadeMultiple Integer32, dcRsvpProductSocketBufPoolSize Integer32, dcRsvpProductSwitchBufPoolSize Integer32, dcRsvpProductTeMibBufPoolSize Integer32, dcRsvpProductRoutingBufPoolSize Integer32, dcRsvpProductLSPSetupPriority Integer32, dcRsvpProductLSPHoldingPriority Integer32, dcRsvpProductAdminStatus DcRsvpAdminStatus, dcRsvpProductOperStatus DcRsvpOperStatus, dcRsvpProductRowStatus RowStatus, dcRsvpProductLsrIndex Unsigned32, dcRsvpProductTeMibIndex Unsigned32, dcRsvpProductMultiStackSupport Integer32, dcRsvpProductUseHopByHop TruthValue, dcRsvpProductUseNotify TruthValue, dcRsvpProductNotifyRRDecay Integer32, dcRsvpProductNotifyRRInterval Integer32, dcRsvpProductNotifyRRLimit Integer32, dcRsvpProductAllowIPEncap TruthValue, dcRsvpProductProtocolExtensions Unsigned32, dcRsvpProductPSRFlags Unsigned32, dcRsvpProductInitPathRRDecay Integer32, dcRsvpProductInitPathRRInterval Integer32, dcRsvpProductInitPathRRLimit Integer32, dcRsvpProductEnableUni TruthValue, dcRsvpProductRestartCapable TruthValue, dcRsvpProductRestartTime Unsigned32, dcRsvpProductRecoveryTime Unsigned32, dcRsvpProductMinPeerRestart Integer32, dcRsvpProductGracefulDelTimeout Integer32, dcRsvpProductEgressDelBehavior INTEGER, dcRsvpProductEnabUniConnSplicing TruthValue, dcRsvpProductFastRerouteCaps Unsigned32, dcRsvpProductFastRroutBkpRtryInt Integer32, dcRsvpProductErrorActionFlags Unsigned32, dcRsvpProductEnableNni INTEGER, dcRsvpProductBehaviorFlags Unsigned32, dcRsvpProductLabelSetStyle INTEGER, dcRsvpProductLabelSetOperStatus INTEGER, dcRsvpProductLabelSetTrapEnable TruthValue, dcRsvpProductLabelSetChngAct Integer32, dcRsvpProductExtPrtAdminStatus DcRsvpAdminStatus, dcRsvpProductUniIncSonetProfile Unsigned32, dcRsvpProductFrrFacAdminStatus DcRsvpAdminStatus, dcRsvpProductFrrFacOperStatus DcRsvpOperStatus, dcRsvpProductIpv6AdminStatus DcRsvpAdminStatus, dcRsvpProductIpv6OperStatus DcRsvpOperStatus, dcRsvpProductAPIIpv6Address Ipv6Address, dcRsvpProductExtPrtOperStatus DcRsvpOperStatus, dcRsvpProductRROHopType INTEGER, dcRsvpProductBfdIndex NumericIndexOrZero, dcRsvpProductBfdBufPoolSize Integer32, dcRsvpProductLspAttrAdminStatus DcRsvpAdminStatus, dcRsvpProductLspAttrOperStatus DcRsvpOperStatus, dcRsvpProductI3Index NumericIndexOrZero, dcRsvpProductSckIndex NumericIndexOrZero, dcRsvpProductNhrIndex NumericIndexOrZero, dcRsvpProductWaitForHellos TruthValue, dcRsvpProductForcePEOnEgrDel TruthValue, dcRsvpProductFastRrtBkpSetupInt Integer32 } dcRsvpProductIndex OBJECT-TYPE SYNTAX DcRsvpIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of this dcRsvpProductEntry. This is the HAF entity index passed on the entity create parameters." ::= { dcRsvpProductEntry 1 } dcRsvpProductASNumber OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The number identifying the autonomous system (AS) to which this node belongs." DEFVAL { 1 } ::= { dcRsvpProductEntry 2 } dcRsvpProductSenderTTL OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The TTL set on messages originating at this node. A value of 0 indicates this number is determined by other means." DEFVAL { 0 } ::= { dcRsvpProductEntry 3 } dcRsvpProductMinTimerPeriod OBJECT-TYPE SYNTAX Integer32 UNITS "milliseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The minimum granularity to allow an internal timer to be set in the DC-RSVP product code." DEFVAL { 200 } ::= { dcRsvpProductEntry 4 } dcRsvpProductAPIIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "Management assigned interface identifier for the (internal) LRAPI interface between RSVP and DC-TPM components. This must be unique in the interface index namespace of the node - it MUST not match any real interface index. It is recommended that this is set to zero or 0x7FFFFFFF." DEFVAL { 2147483647 } ::= { dcRsvpProductEntry 5 } dcRsvpProductAPIAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "Management assigned IP address used to identify the (internal) LRAPI interface between RSVP and DC-TPM components. The configured API address MUST not be a real address in the network. It is recommended that this is set to a non-zero reserved address value, such as 224.0.0.0. If multi-stack support is set to PHOP, this address must be unique for each RSVP stack in the node. The same address(es) can be used on all nodes in the network." DEFVAL { 'E0000000'H } -- 224.0.0.0 ::= { dcRsvpProductEntry 6 } dcRsvpProductAPIRefreshInterval OBJECT-TYPE SYNTAX Integer32 UNITS "milliseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "This field is now deprecated." DEFVAL { 30000 } ::= { dcRsvpProductEntry 7 } dcRsvpProductLocalRepairDelay OBJECT-TYPE SYNTAX Integer32 UNITS "milliseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to set the delay between detection of a path error and instigation of local repair procedures. This allows local routing updates to converge. A value of 0 indicates no delay. A value of -1 indicates that local repair procedures should not take place, but that the error should be propagated upstream. Where FRR capabilities are supported at this node local_repair_delay must be set to -1." DEFVAL { 500 } ::= { dcRsvpProductEntry 8 } dcRsvpProductRefreshInterval OBJECT-TYPE SYNTAX Integer32 UNITS "milliseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "This RSVP value, R, which is used to set the average interval between refresh path and resv messages. Note : If values for the if_refresh_interval and if_refresh_multiple are configured such that the following inequality is not obeyed : 6 * refresh_interval * (refresh_multiple + 0.5) < 0x7FFFFFFF. Then the time-to-die for the path value will be set to its maximum value and it is probable that the lsp will time out before a refresh arrives." DEFVAL { 30000 } ::= { dcRsvpProductEntry 9 } dcRsvpProductRefreshMultiple OBJECT-TYPE SYNTAX Integer32 (1..214783647) MAX-ACCESS read-create STATUS current DESCRIPTION "The RSVP value, K, which is the number of unresponded Path or Resv refresh attempts which must be made, spaced by the refresh interval before the state is deemed to have timed out. Note : See note in dcRsvpProductRefreshInterval above." DEFVAL { 3 } ::= { dcRsvpProductEntry 10 } dcRsvpProductRfrshSlewDenom OBJECT-TYPE SYNTAX Integer32 (1..214783647) MAX-ACCESS read-create STATUS current DESCRIPTION "The denominator of the fraction, SlewMax, which is the maximum allowable increase in the refresh interval, R, to prevent state timeout while changing R. R is increased by this fraction until it reaches the new desired value." DEFVAL { 10 } ::= { dcRsvpProductEntry 11 } dcRsvpProductRfrshSlewNumerator OBJECT-TYPE SYNTAX Integer32 (1..214783647) MAX-ACCESS read-create STATUS current DESCRIPTION "The numerator of the fraction, SlewMax, which is the maximum allowable increase in the refresh interval, R, to prevent state timeout while changing R. R is increased by this fraction until it reaches the new desired value." DEFVAL { 3 } ::= { dcRsvpProductEntry 12 } dcRsvpProductBlockadeMultiple OBJECT-TYPE SYNTAX Integer32 (1..214783647) MAX-ACCESS read-create STATUS current DESCRIPTION "The RSVP value, Kb, which is the number of refresh timeout periods after which blockade state is deleted." DEFVAL { 2 } ::= { dcRsvpProductEntry 13 } dcRsvpProductSocketBufPoolSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The number of pre-reserved buffers available for sending sockets data. This is used to pace the sockets data flows." DEFVAL { 8 } ::= { dcRsvpProductEntry 14 } dcRsvpProductSwitchBufPoolSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The number of pre-reserved buffers available for programming the switch. This is used to ensure programming operations do not fail in buffer shortage conditions." DEFVAL { 8 } ::= { dcRsvpProductEntry 15 } dcRsvpProductTeMibBufPoolSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The number of pre-reserved buffers available for signalling with the DC-TPM entity supporting the instance of the TE-MIB. This is used to ensure signals are not lost in buffer shortage conditions." DEFVAL { 8 } ::= { dcRsvpProductEntry 16 } dcRsvpProductRoutingBufPoolSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The number of pre-reserved buffers available for route queries. This is used to ensure re-routing of many LSPs does not fail in buffer shortage conditions." DEFVAL { 8 } ::= { dcRsvpProductEntry 17 } dcRsvpProductLSPSetupPriority OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-create STATUS current DESCRIPTION "The setup priority to apply to LSPs which are not signalling this parameter. 0 represents the highest priority, 7 the lowest. The value of this object must be numerically more or equal (so lower or equal priority) than the value of the holding priority object." DEFVAL { 4 } ::= { dcRsvpProductEntry 18 } dcRsvpProductLSPHoldingPriority OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-create STATUS current DESCRIPTION "The holding priority to apply to LSPs which are not signalling this parameter. 0 represents the highest priority, 7 the lowest. The value of this object must be numerically less or equal (so higher or equal priority) than the value of the holding priority object." DEFVAL { 3 } ::= { dcRsvpProductEntry 19 } dcRsvpProductAdminStatus OBJECT-TYPE SYNTAX DcRsvpAdminStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The desired administrative state of the RSVP entity." DEFVAL { adminStatusUp } ::= { dcRsvpProductEntry 20 } dcRsvpProductOperStatus OBJECT-TYPE SYNTAX DcRsvpOperStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The current operational state of this instance of DC-RSVP." ::= { dcRsvpProductEntry 21 } dcRsvpProductRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Used to create and delete a DC-RSVP Product Table entry. When this object is set to 'active', only the dcRsvpProductAdminStatus object in the row may be modified." DEFVAL { active } ::= { dcRsvpProductEntry 22 } dcRsvpProductLsrIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The index of the DC-LMGR product instance which this DC-RSVP is to join to as its LDB interface provider. If this value is not specified, or the value of this object is 0, DC-RSVP will use the dcRsvpProductIndex value as the Lsr index when joining on the LDB interface." DEFVAL { 0 } ::= { dcRsvpProductEntry 23 } dcRsvpProductTeMibIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The index of the DC-TPM entity (which supports the TE-MIB) with which this DC-RSVP entity is to join to as its LRA interface provider. If this value is not specified, or the value of this object is 0, DC-RSVP will use the dcRsvpProductIndex value as the TeMib Index when joining on the LRA interface." DEFVAL { 0 } ::= { dcRsvpProductEntry 24 } dcRsvpProductMultiStackSupport OBJECT-TYPE SYNTAX Integer32 (1..3) MAX-ACCESS read-create STATUS current DESCRIPTION "A flag to indicate if multiple RSVP stacks are present in the same system as the current one and, if so, how they are supported. If set to PHOP, Path messages are forwarded to DC-RSVP with the Previous Hop value set as the hop prior to the incoming interface, not as the next hop interface as normal. If set to LIH, the hardware location of the current RSVP stack is used as the LIH in the HOP object." DEFVAL { 1 } ::= { dcRsvpProductEntry 25 } dcRsvpProductUseHopByHop OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "A flag to indicate that DC-RSVP should use the hop by hop addressing scheme for PATH and PATH-TEAR messages it sends. If set then the IP addresses used in the IP header of PATH messages forwarded by DC-RSVP set source as the local outgoing interface IP address, and destination as the next hop router IP address." DEFVAL { false } ::= { dcRsvpProductEntry 26 } dcRsvpProductUseNotify OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "A flag to indicate that DC-RSVP should attempt to insert a Notify Request object in all Path requests that it sends as ingress and all Resv requests that it sends as egress. The precise behavior is modified by a user exit called by the RSVP code. This field is not used unless the mplsTunnelUpNotRecip or mplsTunnelDownNotRecip fields in TE-MIB are set to 0.0.0.0." DEFVAL { false } ::= { dcRsvpProductEntry 27 } dcRsvpProductNotifyRRDecay OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-create STATUS current DESCRIPTION "The percentage increase in the rapid retransmission interval for each consecutive unacknowledged RSVP Notify message. A value of 0 indicates a constant retransmission rate." DEFVAL { 100 } ::= { dcRsvpProductEntry 28 } dcRsvpProductNotifyRRInterval OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The interval in milliseconds before a Notify message is first resent if no acknowledgement is received." DEFVAL { 2000 } ::= { dcRsvpProductEntry 29 } dcRsvpProductNotifyRRLimit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum number of times a Notify message is resent if no acknowledgement is received." DEFVAL { 2 } ::= { dcRsvpProductEntry 30 } dcRsvpProductAllowIPEncap OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "A flag to indicate that DC-RSVP should support the use of IP encapsulation of RSVP packets, which are required for out-of-band signaling. If set, then DC-RSVP will accept incoming RSVP packets that are IP encapsulated, and will IP encapsulate outgoing packets whenever the IP routing stub indicates that it is required for a particular route." DEFVAL { false } ::= { dcRsvpProductEntry 31 } dcRsvpProductProtocolExtensions OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies which extensions to the standard RSVP-TE protocol are enabled. For fully standards-compliant behavior, set this parameter to zero (no bits set). To enable specific non-standard protocol extensions, set this parameter to the bitwise OR of whichever of the following behaviors you wish to enable. - bypassFastReroute: Enable support for facility fast reroute protection of LSPs (bypass LSP protection). This flag is deprecated in favour of the dcRsvpProductFrrFacAdminStatus field which can be modified while RSVP is admin up, however either field can be used. When this flag is set RSVP automatically sets the dcRsvpProductFrrFacAdminStatus. - detourFastReroute: Enable support for one-to-one fast reroute protection of LSPs (detour LSP protection). - noResAffOnInIf: Disable resource affinity checking on incoming interfaces for LSPs. If this flag is set, RSVP will accept Path messages which use invalid resource affinities for the incoming interface used by the LSP." DEFVAL { 0 } ::= { dcRsvpProductEntry 32 } dcRsvpProductPSRFlags OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This field is used by DC-RSVP to determine whether it should set the Path State Removed flag on a PathErr (and therefore remove corresponding state and generate a PathTear). Each bit of this flags field corresponds to a situation where DC-RSVP may generate a PathErr. Setting a particular bit will result in DC-RSVP removing state, setting the Path State Removed flag and generating a PathTear in that corresponding situation. The possible bit values are as follows. - pathErrPSRSet: DC-RSVP has received a PathErr message with the Path State Removed flag set. - pathErrPSRNotSet: DC-RSVP has received a PathErr message with the Path State Removed flag unset. - ldbCommonRcvd: DC-RSVP has received a negative response to an ATG_LDB_RESERVE_LSP_XC or ATG_LDB_CONNECT_LSP_XC message. - ldbPreempted: DC-RSVP has received a Preemption message from Label Manager. - routingError: DC-RSVP has received a Negative response to an ATG_IPR_QUERY_ROUTE message. - invalidPathMsg: DC-RSVP has received an invalid Path message. - unableToRepairRoute: A route has been removed and DC-RSVP is unable to start local repair. - unableToRepairIf: An interface has been removed and DC-RSVP is unable start local repair. - reachedRetryLimit: An initial Path Message has reached its retry limit. - unableToRefresh: DC-RSVP has been unable to refresh an LSP. - resvErrTurnaround: DC-RSVP has received a ResvErr at the Egress node containing a REROUTING object and this is to be turned round into a PathErr. - incomingIfDown: The incoming MPLS data interface for an LSP has been deactivated. - outgoingIfDown: The outgoing MPLS data interface for an LSP has been deactivated." DEFVAL { 0 } ::= { dcRsvpProductEntry 33 } dcRsvpProductInitPathRRDecay OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-create STATUS current DESCRIPTION "The percentage increase in the rapid retransmission interval for each consecutive unacknowledged RSVP Initial Path message. A value of 0 indicates a constant retransmission rate. A Path message is treated as an initial Path if it is the Path message which creates the LSP or a Path refresh message which requires re-routing." DEFVAL { 100 } ::= { dcRsvpProductEntry 34 } dcRsvpProductInitPathRRInterval OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The rapid retransmission interval in milliseconds before an Initial Path message is first resent if no acknowledgement is received. A Path message is treated as an initial Path if it is the Path message which creates the LSP or a Path refresh message which requires re-routing." DEFVAL { 2000 } ::= { dcRsvpProductEntry 35 } dcRsvpProductInitPathRRLimit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum number of times an Initial Path message is resent if no acknowledgement is received. A Path message is treated as an initial Path if it is the Path message which creates the LSP or a Path refresh message which requires re-routing." DEFVAL { 2 } ::= { dcRsvpProductEntry 36 } dcRsvpProductEnableUni OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "A flag to indicate whether the local node supports UNI signaling messages." DEFVAL { false } ::= { dcRsvpProductEntry 37 } dcRsvpProductRestartCapable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "A flag to indicate whether the local node should advertise itself as restart capable. This should be set to AMB_TRUE if fault-tolerance is enabled in DC-MPLS or if the node supports recovery procedures." DEFVAL { false } ::= { dcRsvpProductEntry 38 } dcRsvpProductRestartTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The time in milliseconds that the local node takes to restart RSVP-TE and the communication channel used for RSVP communication. This is advertised to neighbors in the Restart_Cap object in Hello messages. The value chosen should be large enough for RSVP to be terminated and restarted. If fault-tolerance is enabled in DC-MPLS, then sufficient time should be allowed for RSVP to fail over, which should include the time taken for the audit phase to complete. Only used if _restart_capable_ is set to AMB_TRUE. A value of 0xFFFFFFFF can be configured, this implies an infinite restart time. Note that the maximum real time value that can be set is 0x7FFFFFFF. If a value is requested greater than 0x7FFFFFFF and less than 0xFFFFFFFF the request will be rejected." DEFVAL { 60000 } ::= { dcRsvpProductEntry 39 } dcRsvpProductRecoveryTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The period of time in milliseconds that the local node would like neighbors to take to resyncronize RSVP and MPLS forwarding information after the re-establishment of Hello connectivity. This is advertised to neighbors in the Restart_Cap object in Hello messages. A value of zero indicates that the node does not support resynchronization following failure of the local node. A value of 0xFFFFFFFF indicates an infinite recovery time. Note that if fault-tolerance is not enabled in DC-MPLS and the node is acting as an ingress for tunnels, then any ingress tunnels that need to be recovered should be configured during this recovery period. These tunnels should be configured in TE-MIB with the admin_status set to UP, otherwise they will be lost from the switch controller. Only used if _restart_capable_ is set to AMB_TRUE. Note that the maximum real time value that can be set is 0x7FFFFFFF. If a value is requested greater than 0x7FFFFFFF and less than 0xFFFFFFFF the request will be rejected." DEFVAL { 120000 } ::= { dcRsvpProductEntry 40 } dcRsvpProductMinPeerRestart OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The mininum period of time in milliseconds that RSVP should wait for a restart capable neighbor to regain Hello connectivity before invoking procedures related to communication loss. RSVP will wait for the maximum of this time and the restart_time advertised in the RESTART_CAP object in Hello messages from the neighbor." DEFVAL { 0 } ::= { dcRsvpProductEntry 41 } dcRsvpProductGracefulDelTimeout OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The time in milliseconds that DC-MPLS will wait for graceful deletion to complete before the forced deletion procedure is used instead." DEFVAL { 30000 } ::= { dcRsvpProductEntry 42 } dcRsvpProductEgressDelBehavior OBJECT-TYPE SYNTAX INTEGER { delWithPathErr(1), delWithResvD(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the action that an egress node should take in the graceful deletion procedure on receipt of a Path message containing an Admin Status object with the D and R bits set. The possible values are: - delWithPathErr: Send a PathErr message with the Path_State_removed flag set - delWithResvD: Send a Resv message containing an Admin Status object with the D bit set." DEFVAL { delWithPathErr } ::= { dcRsvpProductEntry 43 } dcRsvpProductEnabUniConnSplicing OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "A flag to indicate whether UNI-N nodes should allow the splicing of UNI connections with proprietary ON connections." DEFVAL { false } ::= { dcRsvpProductEntry 44 } dcRsvpProductFastRerouteCaps OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies what fast reroute capabilities are enabled on this node. This field is only valid if the fast reroute extension is enabled in the dcRsvpProductProtocolExtensions field above. - PLR: Node provides fast reroute point of local repair capability. - MP: Node provides fast reroute merge point capability. - DetourRestart: Node implements some protocol extensions to recover detour fast reroute LSPs after a node restart or an adjacent node restart. This flag is only valid if detourFastReroute flag is set in the dcRsvpProductProtocolExtensions field above. - BypassRestart: Node implements some protocol extensions to recover active backups of fast-reroute LSPs signalled using the Facility method after a node restart or an adjacent node restart. This flag is only valid if the bypassFastReroute flag is set in the dcRsvpProductProtocolExtensions field above. Note that support for recovery of the protected LSP and inactive downstream backups does not require any protocol extensions and is provided by default. Note that a node can still perform some FRR processing even if both these flags are clear (at a detour transit for instance)." DEFVAL { 0 } ::= { dcRsvpProductEntry 45 } dcRsvpProductFastRroutBkpRtryInt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "When this node is a PLR, this field specifies the period that the node should wait before retrying the setup of a backup LSP which failed last time because no route was available. In the case that a backup LSP is set up but an error is received from upstream, setup will be attempted again immediately. This field is only valid if this node is defined as PLR capable in the _dcRsvpProductFastRerouteCapabilities_ field above." DEFVAL { 30000 } ::= { dcRsvpProductEntry 46 } dcRsvpProductErrorActionFlags OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This field is used by DC-RSVP to determine whether it should take any special action following certain types of local errors. Each bit of this flags field corresponds to an error and a corresponding action. When one of these errors occurs, the relevant bit flag is checked - if set, the specified action is taken; if not set, the normal action is taken according the RSVP protocol. The possible bit values are the following. - eafTearStateOnLSIErr: When DC-RSVP receives a negative response to an ATG_LDB_CONNECT_LSP_XC message on a UNI node, the Path state is torn down." DEFVAL { 0 } ::= { dcRsvpProductEntry 47 } dcRsvpProductEnableNni OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2), disabling(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "A flag to indicate whether the local node supports NNI signaling messages." DEFVAL { disabled } ::= { dcRsvpProductEntry 48 } dcRsvpProductBehaviorFlags OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies some detailed aspects of the behavior of DC-RSVP. This field may be changed while _admin_status_ is AMB_ADMIN_STATUS_UP. - enableTTLMatch: Whether to discard received RSVP packets sent with the Router Alert option if the IP and RSVP TTL values do not match. In certain circumstances TTL comparison can identify RSVP service breaks, and allow the discarding of packets that would otherwise disrupt installed LSPs. This option has no effect for Out Of Band operation. This option should be left disabled for LSP hierarchy operation (LSPs set up over existing LSPs) and for Facility Fast Reroute (which sets up backup LSPs over existing bypass LSPs)." DEFVAL { 0 } ::= { dcRsvpProductEntry 49 } dcRsvpProductLabelSetStyle OBJECT-TYPE SYNTAX INTEGER { excludeLabelHeader(1), includeLabelHeader(2), goingtoexclude(3), goingtoinclude(4) } MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the style of LABEL_SET object that should be used. RFCs 3741 and 3743 are unclear whether the LABEL_SET object should include LABEL headers. The correct interpretation is that the header should not be present, but there are implementations that include the LABEL header, so this option is included for compatibility with these implementations. - excludeLabelHeader: The LABEL_SET object contains concatenated LABEL values without the object headers. - includeLabelHeader: The LABEL_SET object contains concatenated LABEL objects with the object headers." DEFVAL { excludeLabelHeader } ::= { dcRsvpProductEntry 50 } dcRsvpProductLabelSetOperStatus OBJECT-TYPE SYNTAX INTEGER { excludeLabelHeader(1), includeLabelHeader(2), goingToExclude(3), goingToInclude(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current operational status of Label Set style. - excludeLabelHeader: The LABEL_SET object contains concatenated LABEL values without the object headers. - includeLabelHeader: The LABEL_SET object contains concatenated LABEL objects with the object headers. - goingToExclude: The Label Set Style is being changed from includeLabelHeader to excludeLabelHeader. - goingToInclude: The Label Set Style is being changed from excludeLabelHeader to includeLabelHeader." ::= { dcRsvpProductEntry 51 } dcRsvpProductLabelSetTrapEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to enable traps for the Label Set style oper_status object." DEFVAL { false } ::= { dcRsvpProductEntry 52 } dcRsvpProductLabelSetChngAct OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the action to take when the value of dcRsvpProductLabelSetStyle is changed. - leaveLSPs: All nodes should suppress refreshes and switch to the new format while refreshes are suppressed. - tearLSPs: Any LSPs using label sets will be deleted before switching all nodes to the new format, and any new LSPs using label sets will be dropped/rejected until the switch is complete." DEFVAL { 1 } ::= { dcRsvpProductEntry 53 } dcRsvpProductExtPrtAdminStatus OBJECT-TYPE SYNTAX DcRsvpAdminStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The desired operational state of support for the extended PROTECTION object defined in draft-lang-ccamp-gmpls-recovery-e2e-signaling. Support for end-to-end signalling is a separately licensable component of DC-MPLS. This field must not be set to AMB_ADMIN_STATUS_UP unless this has been licensed." DEFVAL { adminStatusDown } ::= { dcRsvpProductEntry 54 } dcRsvpProductUniIncSonetProfile OBJECT-TYPE SYNTAX Unsigned32 (0..1) MAX-ACCESS read-create STATUS current DESCRIPTION "This field is obsolete. The value in this field is ignored by DC-RSVP for Test and Set commands. This field is always set to 0 for Get responses." DEFVAL { 0 } ::= { dcRsvpProductEntry 55 } dcRsvpProductFrrFacAdminStatus OBJECT-TYPE SYNTAX DcRsvpAdminStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies whether backup LSPs can be put in place for LSPs requesting FRR using the facility method. Setting this to UP means that LSPs that request FRR using the facility method can have protection at this node. Existing LSPs that request FRR facility protection will have protection put in place when the next Path refresh is received. Setting this to DOWN means that LSPs that request FRR using the facility method will not be protected at this node. Existing LSPs that have FRR facility protection will lose that protection, and if the LSP had been rerouted to use the backup LSP then the protected LSP will be lost. This field replaces the bypassFastReroute flag on the protocol extensions field in this MIB (although the bypassFastReroute flag is still supported for backwards compatibility). It can be modified while RSVP is oper_status UP or DOWN. When this field is changed the bypassFastReroute flag is automatically modified to mirror the change." DEFVAL { adminStatusDown } ::= { dcRsvpProductEntry 56 } dcRsvpProductFrrFacOperStatus OBJECT-TYPE SYNTAX DcRsvpOperStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The current operational status for FRR Facility support. When this is UP backup LSPs will be put in place, when this is down backup LSPs will not be put in place and there will be no LSPs that have backup LSPs." ::= { dcRsvpProductEntry 57 } dcRsvpProductIpv6AdminStatus OBJECT-TYPE SYNTAX DcRsvpAdminStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies whether the local node supports IPv6 LSPs. Setting this to UP means that this node supports IPv6 LSPs being set up to, from and through this node. Setting this to DOWN means that IPv6 LSPs are NOT supported by this node. Existing IPv6 LSPs for which this node is the ingress, egress or transit are torn down. This field can be modified while RSVP is oper_status UP or DOWN. The value of this field MUST match the value of the dcMplsTeMibRsvpIpv6AdminStatus field in the dcMplsTeMibEntityTable." DEFVAL { adminStatusDown } ::= { dcRsvpProductEntry 58 } dcRsvpProductIpv6OperStatus OBJECT-TYPE SYNTAX DcRsvpOperStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The current operational status for IPv6 support. When this is UP IPv6 LSPs can be set up to from or through this node. When this is down there will be no active IPv6 LSPs." ::= { dcRsvpProductEntry 59 } dcRsvpProductAPIIpv6Address OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS read-create STATUS current DESCRIPTION "Management assigned IPv6 address used to identify the (internal) LRAPI interface between RSVP and DC-TPM components. The configured API IPv6 address MUST not be a real address in the network. It is recommended that this is set to a non-zero reserved address value. This MUST be an address with global scope. If multi-stack support is set to PHOP, this address must be unique for each RSVP stack in the node. The same address(es) can be used on all nodes in the network." ::= { dcRsvpProductEntry 60 } dcRsvpProductExtPrtOperStatus OBJECT-TYPE SYNTAX DcRsvpOperStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The current operational state of support for the extended PROTECTION object defined in draft-lang-ccamp-gmpls-recovery-e2e-signaling." DEFVAL { operStatusDown } ::= { dcRsvpProductEntry 61 } dcRsvpProductRROHopType OBJECT-TYPE SYNTAX INTEGER { outLinkLabel(0), -- outgoing link ID + label(s) teRouterId(1), -- TE router ID upLink(2), -- upstream link ID dnLinkLabel(3), -- downstream link ID upLinkDnLinkLbl(4), -- up, down link ID + label(s) rtIdDnLinkLbl(5), -- TE router, down link ID + -- label(s) upLinkRtrIdDnLinkLbl(6) -- up link, TE router, down link ID -- + label(s) } MAX-ACCESS read-create STATUS current DESCRIPTION "The type of Recorded Route hop that DC-RSVP will insert on any messages requesting Recorded Route information. DC-RSVP uses the same hop type on all outgoing messages. If the hop type is changed while LSPs are active, the new hop type will be signaled on the next refresh message for each LSP. RRO hop types 1 through 6 are defined in RFC4990 section 6.1.3. RRO hop type 0 is the default behavior and consists of the outgoing interface link ID followed by one or more labels. Currently DC-RSVP supports RRO hop types 0 and 4." DEFVAL { outLinkLabel } ::= { dcRsvpProductEntry 62 } dcRsvpProductBfdIndex OBJECT-TYPE SYNTAX NumericIndexOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "The index of the BFD product instance which this DC-RSVP is to join to as its BFD interface provider. If the value of this object is 0, DC-RSVP will not attempt to join to a BFD provider." DEFVAL { 0 } ::= { dcRsvpProductEntry 63 } dcRsvpProductBfdBufPoolSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The number of pre-reserved buffers available for BFD interface messages. This is used to ensure that the establishment of many BFD sessions does not fail in buffer shortage conditions." DEFVAL { 4 } ::= {dcRsvpProductEntry 64 } dcRsvpProductLspAttrAdminStatus OBJECT-TYPE SYNTAX DcRsvpAdminStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies whether the local node supports the LSP_ATTRIBUTES object. Setting this to UP means that this node supports LSPs with the LSP_ATTRIBUTES object being set up to, from and through this node. Setting this to DOWN means that the LSP_ATTRIBUTES object is NOT supported by this node. Existing LSPs with the LSP_ATTRIBUTES object are torn down, and alarms may be triggered. This field can be modified while RSVP is oper_status UP or DOWN. The value of this field MUST match the value of the dcMplsTeMibMplsOamAdminStatus field in the dcMplsTeMibEntityTable." DEFVAL { adminStatusDown } ::= { dcRsvpProductEntry 65 } dcRsvpProductLspAttrOperStatus OBJECT-TYPE SYNTAX DcRsvpOperStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The current operational state of support for the LSP_ATTRIBUTES object." ::= { dcRsvpProductEntry 66 } dcRsvpProductI3Index OBJECT-TYPE SYNTAX NumericIndexOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "The index of the I3 entity with which this DC-RSVP entity is to join to as its I3 interface provider. If this value is not specified, DC-RSVP will use the dcRsvpProductLsrIndex value, or if this is also not specified, dcRsvpProductIndex as the LSR Index when joining on the I3 interface. This field follows the replaceOnlyWhileDisabled behavior." DEFVAL { 0 } ::= { dcRsvpProductEntry 67 } dcRsvpProductSckIndex OBJECT-TYPE SYNTAX NumericIndexOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "The index of the SCK entity with which this DC-RSVP entity is to join to as its SCK interface provider. If this value is not specified, DC-RSVP will use the dcRsvpProductIndex as the Interface Index when joining on the SCK interface. This field follows the replaceOnlyWhileDisabled behavior." DEFVAL { 0 } ::= { dcRsvpProductEntry 68 } dcRsvpProductNhrIndex OBJECT-TYPE SYNTAX NumericIndexOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "The index of the NHR entity with which this DC-RSVP entity is to join to as its NHR interface provider. If this value is not specified, DC-RSVP will use the dcRsvpProductLsrIndex value, or if this is also not specified, dcRsvpProductIndex as the LSR Index when joining on the NHR interface. This field follows the replaceOnlyWhileDisabled behavior." DEFVAL { 0 } ::= { dcRsvpProductEntry 69 } dcRsvpProductWaitForHellos OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies whether DC-RSVP should suppress sending of Path messages if gracefully restarting and there is no Hello session up to the next hop. If a Path message is suppressed, DC-RSVP starts the Path refresh timer with interval equal to the rapid retransmission interval so that the Path will be retried. This behavior resolves a possible timing window in RSVP graceful restart processing that can lead to LSPs failing to be recovered if the initial Hello message is dropped. Only used if _restart_capable_ is set to AMB_TRUE." DEFVAL { false } ::= { dcRsvpProductEntry 70 } dcRsvpProductForcePEOnEgrDel OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Forces DC-RSVP to send a PathErr message upstream when carrying out forced deletion of an LSP at the egress node. If this field is AMB_TRUE then DC-RSVP will always send a PathErr upstream with the PSR flag set and release all state for a deleted LSP. This is the behavior defined in the OIF 1.0 specification. If this field is AMB_FALSE then DC-RSVP will do the following. - Follow the OIF 1.0 specification and send a PathErr if the GUA object is present for the deleted LSP. - Follow the IETF specification and send a ResvTear upstream if the OIF GUA object is not present." DEFVAL { false } ::= { dcRsvpProductEntry 71 } dcRsvpProductFastRrtBkpSetupInt OBJECT-TYPE SYNTAX Integer32 UNITS "milliseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "When this node is a PLR, this field specifies the maximum period that the node should wait on initiating the setup of a backup LSP before sending a Resv message upstream for the protected LSP. A value of 0 means that the node should wait indefinitely. This field is only valid if this node is defined as PLR capable in the _dcRsvpProductFastRerouteCapabilities_ field above." DEFVAL { 0 } ::= { dcRsvpProductEntry 72 } -- Diagnostics table -- This table is used to control diagnostic requests and responses. dcRsvpDiagnosticTable OBJECT-TYPE SYNTAX SEQUENCE OF DcRsvpDiagnosticEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of sessions that are being diagnosed." ::= { dcRsvpObjects 2 } dcRsvpDiagnosticEntry OBJECT-TYPE SYNTAX DcRsvpDiagnosticEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry represents a session that is being diagnosed." INDEX { dcRsvpDiagProductIndex, dcRsvpDiagRequestIndex } ::= { dcRsvpDiagnosticTable 1 } DcRsvpDiagnosticEntry ::= SEQUENCE { dcRsvpDiagProductIndex DcRsvpIndex, dcRsvpDiagRequestIndex DcRsvpDiagReqIndex, dcRsvpDiagReqsInProgress Unsigned32, dcRsvpDiagSessionEndPoint IpAddress, dcRsvpDiagSessionTunnelId Unsigned32, dcRsvpDiagSessionExtTunnelId Unsigned32, dcRsvpDiagLastHop IpAddress, dcRsvpDiagSender IpAddress, dcRsvpDiagMaxHops Integer32, dcRsvpDiagHopByHopReply TruthValue, dcRsvpDiagRowStatus RowStatus } dcRsvpDiagProductIndex OBJECT-TYPE SYNTAX DcRsvpIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of the DC-RSVP product that is handling this query." ::= { dcRsvpDiagnosticEntry 1 } dcRsvpDiagRequestIndex OBJECT-TYPE SYNTAX DcRsvpDiagReqIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of this dcRsvpDiagnosticEntry. This corresponds to a particular session being diagnosed and is an arbitrary value, defined on row creation." ::= { dcRsvpDiagnosticEntry 2 } dcRsvpDiagReqsInProgress OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of outstanding diagnostic requests relating to this session." ::= { dcRsvpDiagnosticEntry 3 } dcRsvpDiagSessionEndPoint OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of the tunnel end point, from the LSP_TUNNEL_IPv4 session object." ::= { dcRsvpDiagnosticEntry 4 } dcRsvpDiagSessionTunnelId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The tunnel ID, from the LSP_TUNNEL_IPv4 session object." ::= { dcRsvpDiagnosticEntry 5 } dcRsvpDiagSessionExtTunnelId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The extended tunnel ID, from the LSP_TUNNEL_IPv4 session object." ::= { dcRsvpDiagnosticEntry 6 } dcRsvpDiagLastHop OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of the last hop to be queried. This is the address to which the DREQ message is first sent." ::= { dcRsvpDiagnosticEntry 7 } dcRsvpDiagSender OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of the sender for the specified session." ::= { dcRsvpDiagnosticEntry 8 } dcRsvpDiagMaxHops OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of hops to diagnose." ::= { dcRsvpDiagnosticEntry 9 } dcRsvpDiagHopByHopReply OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "A flag to indicate that DREPs should be returned hop-by- hop using the reverse of the path taken by the DREQ." ::= { dcRsvpDiagnosticEntry 10 } dcRsvpDiagRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Used to create or delete a DC-RSVP Diagnostic Table entry." ::= { dcRsvpDiagnosticEntry 11 } -- Diagnostic node table -- This table is used to present diagnostic information about nodes in a session. dcRsvpDiagNodeTable OBJECT-TYPE SYNTAX SEQUENCE OF DcRsvpDiagNodeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of nodes within a session that is being diagnosed. External management can extract information from this table, but cannot modify information in it." ::= { dcRsvpObjects 3 } dcRsvpDiagNodeEntry OBJECT-TYPE SYNTAX DcRsvpDiagNodeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry represents a node within a session that is being diagnosed." INDEX { dcRsvpDiagNodeProductIndex, dcRsvpDiagNodeRequestIndex, dcRsvpDiagNodeIndex } ::= { dcRsvpDiagNodeTable 1 } DcRsvpDiagNodeEntry ::= SEQUENCE { dcRsvpDiagNodeProductIndex DcRsvpIndex, dcRsvpDiagNodeRequestIndex DcRsvpDiagReqIndex, dcRsvpDiagNodeIndex DcRsvpDiagNodeIndexType, dcRsvpDiagNodeType DcRsvpDiagNodeTypeVal, -- Below is the information that is returned in a DIAG_RESPONSE dcRsvpDiagNodeDreqArrivalTime Unsigned32, dcRsvpDiagNodeIncomingIfAddr IpAddress, dcRsvpDiagNodeOutgoingIfAddr IpAddress, dcRsvpDiagNodePrevHopAddr IpAddress, dcRsvpDiagNodeDTTL Integer32, dcRsvpDiagNodeMFlag TruthValue, dcRsvpDiagNodeRErr Integer32, dcRsvpDiagNodeKValue Integer32, dcRsvpDiagNodeTimerValue Integer32, -- Below are the objects that can be appended to a DIAG_RESPONSE dcRsvpDiagRsvpHopAddr IpAddress, dcRsvpDiagRsvpHopLIH Unsigned32, dcRsvpDiagSenderTpltAddress IpAddress, dcRsvpDiagSenderTpltLSPId Integer32, -- Info from SENDER_TSPEC and ADSPEC is covered by RRI_FLOWSPEC dcRsvpDiagFlowSpecCLBktRate Unsigned32, dcRsvpDiagFlowSpecCLBktDep Unsigned32, dcRsvpDiagFlowSpecCLPkDataRate Unsigned32, dcRsvpDiagFlowSpecCLMinPolUnit Unsigned32, dcRsvpDiagFlowSpecCLMaxPktSize Unsigned32, dcRsvpDiagFlowSpecGQBktRate Unsigned32, dcRsvpDiagFlowSpecGQBktDep Unsigned32, dcRsvpDiagFlowSpecGQPkDataRate Unsigned32, dcRsvpDiagFlowSpecGQMinPolUnit Unsigned32, dcRsvpDiagFlowSpecGQMaxPktSize Unsigned32, dcRsvpDiagFlowSpecGQRate Unsigned32, dcRsvpDiagFlowSpecGQSlack Unsigned32, dcRsvpDiagFlowSpecCoSCoS Integer32, dcRsvpDiagFlowSpecCoSMTU Integer32, dcRsvpDiagFilterSpecAddress IpAddress, dcRsvpDiagFilterSpecLSPId Integer32, dcRsvpDiagConfirmRcvAddr IpAddress, dcRsvpDiagStyle Unsigned32 -- The SCOPE object is omitted } dcRsvpDiagNodeProductIndex OBJECT-TYPE SYNTAX DcRsvpIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of the DC-RSVP product that is handling this query." ::= { dcRsvpDiagNodeEntry 1 } dcRsvpDiagNodeRequestIndex OBJECT-TYPE SYNTAX DcRsvpDiagReqIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of the corresponding request in dcRsvpDiagnosticTable." ::= { dcRsvpDiagNodeEntry 2 } dcRsvpDiagNodeIndex OBJECT-TYPE SYNTAX DcRsvpDiagNodeIndexType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of this dcRsvpDiagNodeEntry. This is equivalent to the hop number, with 1 being the ingress." ::= { dcRsvpDiagNodeEntry 3 } dcRsvpDiagNodeType OBJECT-TYPE SYNTAX DcRsvpDiagNodeTypeVal MAX-ACCESS read-only STATUS current DESCRIPTION "The type of the node: ingress, transit, egress or missing. Missing indicates that no diagnostic response has been received for this node, and this entry may in fact represent more than one node." ::= { dcRsvpDiagNodeEntry 4 } dcRsvpDiagNodeDreqArrivalTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The arrival time of the DREQ at the node, specified as a 32-bit NTP timestamp." ::= { dcRsvpDiagNodeEntry 5 } dcRsvpDiagNodeIncomingIfAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of the interface on which message from the sender are expected to arrive at this node, or 0 if unknown." ::= { dcRsvpDiagNodeEntry 6 } dcRsvpDiagNodeOutgoingIfAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of the interface through which the DREQ arrived and to which messages flow from the given sender for the specified session address, or 0 if unknown." ::= { dcRsvpDiagNodeEntry 7 } dcRsvpDiagNodePrevHopAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address from which this node receives RSVP PATH messages for this source, or 0 if unknown. This is also the address to which the DREQ was forwarded." ::= { dcRsvpDiagNodeEntry 8 } dcRsvpDiagNodeDTTL OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of IP hops traversed by the DREQ between the downstream RSVP node and this node." ::= { dcRsvpDiagNodeEntry 9 } dcRsvpDiagNodeMFlag OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "A flag that indicates whether the reservation described by the response objects is merged with reservations from other downstream interfaces before being forwarded upstream." ::= { dcRsvpDiagNodeEntry 10 } dcRsvpDiagNodeRErr OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "The error conditions at this node. Bit 3 indicates ROUTE object too big; Bit 2 indicates packet too big; Bit 1 indicates no PATH state. Bit 1 is the least significant bit." ::= { dcRsvpDiagNodeEntry 11 } dcRsvpDiagNodeKValue OBJECT-TYPE SYNTAX Integer32 (0..15) MAX-ACCESS read-only STATUS current DESCRIPTION "The refresh timer multiple." ::= { dcRsvpDiagNodeEntry 12 } dcRsvpDiagNodeTimerValue OBJECT-TYPE SYNTAX Integer32 (0..65535) UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The local refresh timer value in seconds." ::= { dcRsvpDiagNodeEntry 13 } dcRsvpDiagRsvpHopAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The hop address from the session's RSVP_HOP object." ::= { dcRsvpDiagNodeEntry 14 } dcRsvpDiagRsvpHopLIH OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The LIH from the session's RSVP_HOP object." ::= { dcRsvpDiagNodeEntry 15 } dcRsvpDiagSenderTpltAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The address from the session's SENDER_TEMPLATE object." ::= { dcRsvpDiagNodeEntry 16 } dcRsvpDiagSenderTpltLSPId OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The LSP ID from the session's SENDER_TEMPLATE object." ::= { dcRsvpDiagNodeEntry 17 } dcRsvpDiagFlowSpecCLBktRate OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Int-serv controlled load token bucket rate in bytes per second, from the session's RRI_FLOWSPEC object. This value is rounded to the nearest integer." ::= { dcRsvpDiagNodeEntry 18 } dcRsvpDiagFlowSpecCLBktDep OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Int-serv controlled load token bucket depth in bytes, from the session's RRI_FLOWSPEC object. This value is rounded to the nearest integer." ::= { dcRsvpDiagNodeEntry 19 } dcRsvpDiagFlowSpecCLPkDataRate OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Int-serv controlled load peak data rate in bytes per second, from the session's RRI_FLOWSPEC object. This value is rounded to the nearest integer." ::= { dcRsvpDiagNodeEntry 20 } dcRsvpDiagFlowSpecCLMinPolUnit OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Int-serv controlled load minimum policed unit from the session's RRI_FLOWSPEC object." ::= { dcRsvpDiagNodeEntry 21 } dcRsvpDiagFlowSpecCLMaxPktSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Int-serv controlled load maximum packet size from the session's RRI_FLOWSPEC object." ::= { dcRsvpDiagNodeEntry 22 } dcRsvpDiagFlowSpecGQBktRate OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Int-serv guaranteed QoS token bucket rate in bytes per second, from the session's RRI_FLOWSPEC object. This value is rounded to the nearest integer." ::= { dcRsvpDiagNodeEntry 23 } dcRsvpDiagFlowSpecGQBktDep OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Int-serv guaranteed QoS token bucket depth in bytes, from the session's RRI_FLOWSPEC object. This value is rounded to the nearest integer." ::= { dcRsvpDiagNodeEntry 24 } dcRsvpDiagFlowSpecGQPkDataRate OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Int-serv guaranteed QoS peak data rate in bytes per second, from the session's RRI_FLOWSPEC object. This value is rounded to the nearest integer." ::= { dcRsvpDiagNodeEntry 25 } dcRsvpDiagFlowSpecGQMinPolUnit OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Int-serv guaranteed QoS minimum policed unit from the session's RRI_FLOWSPEC object." ::= { dcRsvpDiagNodeEntry 26 } dcRsvpDiagFlowSpecGQMaxPktSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Int-serv guaranteed QoS maximum packet size from the session's RRI_FLOWSPEC object." ::= { dcRsvpDiagNodeEntry 27 } dcRsvpDiagFlowSpecGQRate OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Int-serv guaranteed QoS rate in bytes per second, from the session's RRI_FLOWSPEC object. This value is rounded to the nearest integer." ::= { dcRsvpDiagNodeEntry 28 } dcRsvpDiagFlowSpecGQSlack OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Int-serv guaranteed QoS slack in microseconds, from the session's RRI_FLOWSPEC object." ::= { dcRsvpDiagNodeEntry 29 } dcRsvpDiagFlowSpecCoSCoS OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "CoS class of service from the session's RRI_FLOWSPEC object." ::= { dcRsvpDiagNodeEntry 30 } dcRsvpDiagFlowSpecCoSMTU OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "CoS maximum packet size from the session's RRI_FLOWSPEC object." ::= { dcRsvpDiagNodeEntry 31 } dcRsvpDiagFilterSpecAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The address from the session's FILTER_SPEC object." ::= { dcRsvpDiagNodeEntry 32 } dcRsvpDiagFilterSpecLSPId OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The LSP ID from the session's FILTER_SPEC object." ::= { dcRsvpDiagNodeEntry 33 } dcRsvpDiagConfirmRcvAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The address from the session's CONFIRM object." ::= { dcRsvpDiagNodeEntry 34 } dcRsvpDiagStyle OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The style word from the session's STYLE object." ::= { dcRsvpDiagNodeEntry 35 } dcRsvpNotifications OBJECT IDENTIFIER ::= { dcRsvp 2 } -- traps dcRsvpNotifyPrefix OBJECT IDENTIFIER ::= { dcRsvpNotifications 0 } -- Notifications rsvpLabelSetTrap NOTIFICATION-TYPE OBJECTS { dcRsvpProductLabelSetStyle, dcRsvpProductLabelSetOperStatus } STATUS current DESCRIPTION "The rsvpLabelSetTrap structure is used when sending MIB TRAPs from RSVP that are associated with the dcRsvpProductLabelSetOperStatus. The values are taken from the dcRsvpProductTable. The trap is sent when the dcRsvpProductLabelSetOperStatus changes to a stable value if the dcRsvpProductLabelSetTrapEnable field is set." ::= { dcRsvpNotifyPrefix 1 } -- End of notifications -- dcRsvpIf Table -- This table is used to manage RSVP-TE interface parameters. dcRsvpIfTable OBJECT-TYPE -- FAMILY-SHORT-NAME dcRsvpIf SYNTAX SEQUENCE OF DcRsvpIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry in this table represents a RSVP-TE interface parameters entity." ::= { dcRsvpObjects 4 } dcRsvpIfEntry OBJECT-TYPE SYNTAX DcRsvpIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry represents a RSVP-TE interface." INDEX { dcRsvpIfProductIndex, dcRsvpIfIndex } ::= { dcRsvpIfTable 1 } DcRsvpIfEntry ::= SEQUENCE { dcRsvpIfProductIndex DcRsvpIndex, dcRsvpIfIndex Integer32, dcRsvpIfName DisplayString, dcRsvpIfRowStatus RowStatus, dcRsvpIfAdminStatus DcRsvpAdminStatus, dcRsvpIfOperStatus DcRsvpOperStatus, dcRsvpIfUseRefrMsgs DcRsvpIfRefreshOption, dcRsvpIfUseMessageIDs TruthValue, dcRsvpIfRefreshInterval Integer32, dcRsvpIfHelloPeriod Unsigned32, dcRsvpIfHelloTolerance Unsigned32, dcRsvpIfBfdEnabled Integer32, dcRsvpIfPhpEnabled Integer32, dcRsvpIfExplNullEnabled Integer32, dcRsvpIfAdminGroup Integer32 } dcRsvpIfProductIndex OBJECT-TYPE SYNTAX DcRsvpIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index for the RSVP-TE instance." ::= { dcRsvpIfEntry 1 } dcRsvpIfIndex OBJECT-TYPE SYNTAX Integer32 (0..'7FFFFFFF'h) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Network interface index in the IF-MIB (RFC 2233) of the RSVP-TE interface." ::= { dcRsvpIfEntry 2 } dcRsvpIfName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The textual name of the interface. The value of this object is the name of the interface as assigned by the local device and is suitable for use in commands entered at the device's 'console'. This might be a text name, such as 'le0' or a simple port number, such as '1', depending on the interface naming syntax of the device. It is unique per logical interface. Set to null if not known." ::= { dcRsvpIfEntry 3 } dcRsvpIfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status for this RSVP-TE interface table entry, used to create and destroy table entries." ::= { dcRsvpIfEntry 4 } dcRsvpIfAdminStatus OBJECT-TYPE SYNTAX DcRsvpAdminStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Administrative status for this interface. When dcRsvpIfRowStatus is set to 'active' and dcRsvpIfAdminStatus is 'up' this interface is advertised into DC-MPLS." DEFVAL { adminStatusDown } ::= { dcRsvpIfEntry 5 } dcRsvpIfOperStatus OBJECT-TYPE SYNTAX DcRsvpOperStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Current operational status of the RSVP-TE interface." ::= { dcRsvpIfEntry 6 } dcRsvpIfUseRefrMsgs OBJECT-TYPE SYNTAX DcRsvpIfRefreshOption MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the level of refresh reduction support to be configured on this interface." DEFVAL { 0 } ::= { dcRsvpIfEntry 7 } dcRsvpIfUseMessageIDs OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates whether Message ID support should be configured on this interface. Note that Refresh Reduction measures cannot be used if Message ID support is not enabled for that interface." DEFVAL { false } ::= { dcRsvpIfEntry 8 } dcRsvpIfRefreshInterval OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The average interval, in milliseconds, between Path and Resv refresh messages for LSPs which use this interface for RSVP-signalled data. A value of 0 indicates that the globally configured value in the RSVP Product MIB table is used for this interface. A value of -1 indicates that Path and Resv refresh messages are not required on this interface." DEFVAL { 30000 } ::= { dcRsvpIfEntry 9 } dcRsvpIfHelloPeriod OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "Default period in milliseconds between sending Hello messages to all neighbors on this interface. If this is set to 0, no Hello messages are sent by this interface." DEFVAL { 0 } ::= { dcRsvpIfEntry 10 } dcRsvpIfHelloTolerance OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "Number of hello periods which may pass without receiving a successful Hello message from a partner before the Hello session times out." DEFVAL { 3 } ::= { dcRsvpIfEntry 11 } dcRsvpIfBfdEnabled OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates whether Bidirectional Forwarding Detection (BFD) is enabled on this interface." DEFVAL { 0 } ::= { dcRsvpIfEntry 12 } dcRsvpIfPhpEnabled OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates whether Penultimate Hop Popping (PHP) is enabled on this interface." DEFVAL { 1 } ::= { dcRsvpIfEntry 13 } dcRsvpIfExplNullEnabled OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates whether Explicit NULL is enabled on this interface." DEFVAL { 0 } ::= { dcRsvpIfEntry 14 } dcRsvpIfAdminGroup OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "RSVP-TE interface administrative group for this interface." DEFVAL { 0 } ::= { dcRsvpIfEntry 15 } -- end of dcRsvpIfTable -- Module compliance. -- conformance dcRsvpConformance OBJECT IDENTIFIER ::= {dcRsvp 3 } dcRsvpCompliances OBJECT IDENTIFIER ::= { dcRsvpConformance 1 } dcRsvpGroups OBJECT IDENTIFIER ::= { dcRsvpConformance 2 } dcRsvpCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for the DC-RSVP product MIB." MODULE GROUP dcRsvpProductGroup DESCRIPTION "Product Table Objects." GROUP dcRsvpDiagGroup DESCRIPTION "Diagnostic Table Objects." GROUP dcRsvpDiagNodeGroup DESCRIPTION "Diag Node Table Objects." GROUP dcRsvpNotificationGroup DESCRIPTION "This group is mandatory for those implementations which can implement the notifications contained in this group." ::= { dcRsvpCompliances 1 } dcRsvpProductGroup OBJECT-GROUP OBJECTS { dcRsvpProductASNumber, dcRsvpProductSenderTTL, dcRsvpProductMinTimerPeriod, dcRsvpProductAPIIfIndex, dcRsvpProductAPIAddress, dcRsvpProductAPIRefreshInterval, dcRsvpProductLocalRepairDelay, dcRsvpProductRefreshInterval, dcRsvpProductRefreshMultiple, dcRsvpProductRfrshSlewDenom, dcRsvpProductRfrshSlewNumerator, dcRsvpProductBlockadeMultiple, dcRsvpProductSocketBufPoolSize, dcRsvpProductSwitchBufPoolSize, dcRsvpProductTeMibBufPoolSize, dcRsvpProductRoutingBufPoolSize, dcRsvpProductLSPSetupPriority, dcRsvpProductLSPHoldingPriority, dcRsvpProductAdminStatus, dcRsvpProductOperStatus, dcRsvpProductRowStatus, dcRsvpProductLsrIndex, dcRsvpProductTeMibIndex, dcRsvpProductMultiStackSupport, dcRsvpProductUseHopByHop, dcRsvpProductUseNotify, dcRsvpProductNotifyRRDecay, dcRsvpProductNotifyRRInterval, dcRsvpProductNotifyRRLimit, dcRsvpProductAllowIPEncap, dcRsvpProductProtocolExtensions, dcRsvpProductPSRFlags, dcRsvpProductInitPathRRDecay, dcRsvpProductInitPathRRInterval, dcRsvpProductInitPathRRLimit, dcRsvpProductEnableUni, dcRsvpProductRestartCapable, dcRsvpProductRestartTime, dcRsvpProductRecoveryTime, dcRsvpProductMinPeerRestart, dcRsvpProductGracefulDelTimeout, dcRsvpProductEgressDelBehavior, dcRsvpProductEnabUniConnSplicing, dcRsvpProductFastRerouteCaps, dcRsvpProductFastRroutBkpRtryInt, dcRsvpProductErrorActionFlags, dcRsvpProductEnableNni, dcRsvpProductBehaviorFlags, dcRsvpProductLabelSetStyle, dcRsvpProductLabelSetOperStatus, dcRsvpProductLabelSetTrapEnable, dcRsvpProductLabelSetChngAct, dcRsvpProductExtPrtAdminStatus, dcRsvpProductUniIncSonetProfile, dcRsvpProductFrrFacAdminStatus, dcRsvpProductFrrFacOperStatus, dcRsvpProductIpv6AdminStatus, dcRsvpProductIpv6OperStatus, dcRsvpProductAPIIpv6Address, dcRsvpProductExtPrtOperStatus, dcRsvpProductRROHopType, dcRsvpProductBfdIndex, dcRsvpProductBfdBufPoolSize, dcRsvpProductLspAttrAdminStatus, dcRsvpProductLspAttrOperStatus, dcRsvpProductI3Index, dcRsvpProductSckIndex, dcRsvpProductNhrIndex, dcRsvpProductWaitForHellos, dcRsvpProductForcePEOnEgrDel, dcRsvpProductFastRrtBkpSetupInt } STATUS current DESCRIPTION "Product Table Objects." ::= { dcRsvpGroups 2 } dcRsvpDiagGroup OBJECT-GROUP OBJECTS { dcRsvpDiagReqsInProgress, dcRsvpDiagSessionEndPoint, dcRsvpDiagSessionTunnelId, dcRsvpDiagSessionExtTunnelId, dcRsvpDiagLastHop, dcRsvpDiagSender, dcRsvpDiagMaxHops, dcRsvpDiagHopByHopReply, dcRsvpDiagRowStatus } STATUS current DESCRIPTION "Diagnostic Table Objects." ::= { dcRsvpGroups 3 } dcRsvpDiagNodeGroup OBJECT-GROUP OBJECTS { dcRsvpDiagNodeType, dcRsvpDiagNodeDreqArrivalTime, dcRsvpDiagNodeIncomingIfAddr, dcRsvpDiagNodeOutgoingIfAddr, dcRsvpDiagNodePrevHopAddr, dcRsvpDiagNodeDTTL, dcRsvpDiagNodeMFlag, dcRsvpDiagNodeRErr, dcRsvpDiagNodeKValue, dcRsvpDiagNodeTimerValue, dcRsvpDiagRsvpHopAddr, dcRsvpDiagRsvpHopLIH, dcRsvpDiagSenderTpltLSPId, dcRsvpDiagSenderTpltAddress, dcRsvpDiagFlowSpecCLBktRate, dcRsvpDiagFlowSpecCLBktDep, dcRsvpDiagFlowSpecCLPkDataRate, dcRsvpDiagFlowSpecCLMinPolUnit, dcRsvpDiagFlowSpecCLMaxPktSize, dcRsvpDiagFlowSpecGQBktRate, dcRsvpDiagFlowSpecGQBktDep, dcRsvpDiagFlowSpecGQPkDataRate, dcRsvpDiagFlowSpecGQMinPolUnit, dcRsvpDiagFlowSpecGQMaxPktSize, dcRsvpDiagFlowSpecGQRate, dcRsvpDiagFlowSpecGQSlack, dcRsvpDiagFlowSpecCoSCoS, dcRsvpDiagFlowSpecCoSMTU, dcRsvpDiagFilterSpecAddress, dcRsvpDiagFilterSpecLSPId, dcRsvpDiagConfirmRcvAddr, dcRsvpDiagStyle } STATUS current DESCRIPTION "Diag Node Table Objects." ::= { dcRsvpGroups 4 } dcRsvpNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { rsvpLabelSetTrap } STATUS current DESCRIPTION "Set of notifications implemented in this module. None is mandatory." ::= { dcRsvpGroups 5 } dcRsvpIfEntryGroup OBJECT-GROUP OBJECTS { dcRsvpIfName, dcRsvpIfRowStatus, dcRsvpIfAdminStatus, dcRsvpIfOperStatus, dcRsvpIfUseRefrMsgs, dcRsvpIfUseMessageIDs, dcRsvpIfRefreshInterval, dcRsvpIfHelloPeriod, dcRsvpIfHelloTolerance } STATUS current DESCRIPTION "RSVP-TE interface Table Objects." ::= { dcRsvpGroups 6 } END