DC-L2VPN-MIB DEFINITIONS ::= BEGIN -- PRODUCT-SHORT-NAME L2VM IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, Integer32, TimeTicks FROM SNMPv2-SMI TEXTUAL-CONVENTION, TruthValue, RowStatus FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF MjStatus, SjStatus, AdminStatus, OperStatus, NpgOperStatus, NumericIndex FROM DC-MASTER-TC; l2vpnMib MODULE-IDENTITY LAST-UPDATED "201309200000Z" -- Fri Sep 20 00:00:00 GMT 2013 ORGANIZATION "Data Connection Ltd." CONTACT-INFO "Postal: Data Connection Ltd. 100 Church Street Enfield EN2 6BQ United Kingdom Tel: +44 20 8366 1177 E-mail: l2vpn@dataconnection.com" DESCRIPTION "DC-L2VPN Manager MIB." ::= { iso member-body (2) gb (826) national (0) eng-ltd(1) dataConnectionLtd (1578918) adg (5) l2(94) l2vpn(2) 1 } l2vpnObjects OBJECT IDENTIFIER ::= { l2vpnMib 1 } -- L2VPN tables l2vpnConformance OBJECT IDENTIFIER ::= { l2vpnMib 2 } -- Module conformance ------------------------------------------------------------------------------- -- -- Textual conventions -- L2vmMjIfId ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The type of interface to which a master join applies." SYNTAX INTEGER { ifAtgI3(696844288), -- Interface IF_ATG_I3 ifAtgBdpi(697761792), -- Interface IF_ATG_BDPI ifAtgPvpi(1921384448) -- Interface IF_ATG_PVPI } L2vmSjIfId ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The type of interface to which a slave join applies." SYNTAX INTEGER { ifAtgRpi(1031864320) -- Interface IF_ATG_QCRP } L2vpnADType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Types of auto-discovery protocol that can be used for L2VPNs." SYNTAX INTEGER { none (1), -- All PWs provisioned statically bgp (2) -- BGP used to discover L2VPN sites. } L2vpnSigType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Types of signaling protocol that can be used for L2VPNs." SYNTAX INTEGER { none (1), -- All PWs provisioned statically ldp (2), -- LDP used to signal pseudowires bgp (3) -- BGP used to signal pseudowires } L2vpnPwBindType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This type represents the different ways to identify a PW that is bound to a VPN." SYNTAX INTEGER { pwMibIndex (1), -- The PW(s) are identified by a PW set -- index, which corresponds to a set of -- PWs explicitly provisioned in the -- pwTable with pwRedundancySetId set to -- that index. lclRmtVeId (2) -- The PW is identified by a local and -- remote VE ID } L2vpnType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Types of L2VPN." SYNTAX INTEGER { none (0), -- No L2VPN vpls (1), -- Virtual Private LAN Service vpws (2) -- Virtual Private Wire Service } L2vpnSiteId ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "An L2VPN site ID." SYNTAX Unsigned32 (1..4294967295) L2vpnVeIdOrZero ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "An L2VPN VE ID." SYNTAX Unsigned32 (0..4294967295) BgpRouteDistinguisher ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Syntax for a route distinguisher. For a complete definition of a route distinguisher, see [RFC4364]." REFERENCE "[RFC4364]" SYNTAX OCTET STRING(SIZE (8)) BgpExtendedCommunity ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Syntax for a BGP extended community." REFERENCE "[RFC4364]" SYNTAX OCTET STRING(SIZE (8)) BgpRouteTargetType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Used to define the type of a route target usage. Route targets can be specified to be imported, exported, or both. For a complete definition of a route target, see [RFC4364]." REFERENCE "[RFC4364]" SYNTAX INTEGER { import(1), export(2), both(3) } ------------------------------------------------------------------------------- -- -- DC-L2VPN Manager Entity Table. -- l2vmEntityTable OBJECT-TYPE -- FAMILY-SHORT-NAME L2VM_ENT SYNTAX SEQUENCE OF L2vmEntityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "DC-L2VPN Manager Entity Table. This is the top-level MIB for DC-L2VPN Manager. Each entry in this table represents a DC-L2VPN Manager entity." ::= { l2vpnObjects 1 } l2vmEntityEntry OBJECT-TYPE SYNTAX L2vmEntityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry represents a DC-L2VPN Manager entity." INDEX { l2vmEntityIndex } ::= { l2vmEntityTable 1 } L2vmEntityEntry ::= SEQUENCE { l2vmEntityIndex NumericIndex, l2vmEntityRowStatus RowStatus, l2vmEntityAdminStatus AdminStatus, l2vmEntityOperStatus NpgOperStatus, l2vmEntityVplsIndexNext NumericIndex, l2vmEntityVpwsIndexNext NumericIndex, l2vmEntityNbasePriority Integer32, l2vmEntityTimerGranularity Integer32, l2vmEntityRestartDuration TimeTicks, l2vmEntityRescheduleLimit Integer32, l2vmEntityPvpiBufferPoolSize Integer32, l2vmEntityRpiBufferPoolSize Integer32, l2vmEntityRpiFailTimeout TimeTicks, l2vmEntityRetryInterval TimeTicks, l2vmEntityVpnNotifEnable TruthValue, l2vmEntityVpnNotifBufferPoolSize Integer32, l2vmEntitySupportVpls TruthValue, l2vmEntityBdpiBufferPoolSize Integer32 } l2vmEntityIndex OBJECT-TYPE SYNTAX NumericIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Identifies a DC-L2VPN Manager entity." ::= { l2vmEntityEntry 1 } l2vmEntityRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status for this DC-L2VPN Manager entity, used to create and destroy table entries." ::= { l2vmEntityEntry 2 } l2vmEntityAdminStatus OBJECT-TYPE SYNTAX AdminStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The administrative status of this DC-L2VPN Manager entity, used to activate and deactivate DC-L2VPN Manager." DEFVAL { adminStatusUp } ::= { l2vmEntityEntry 3 } l2vmEntityOperStatus OBJECT-TYPE SYNTAX NpgOperStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The current operational status of this DC-L2VPN Manager entity." ::= { l2vmEntityEntry 4 } -- This following object is equivalent to the vplsConfigIndexNext object in -- draft-ietf-l2vpn-vpls-mib. l2vmEntityVplsIndexNext OBJECT-TYPE SYNTAX NumericIndex MAX-ACCESS read-only STATUS current DESCRIPTION "This field indicates an appropriate value to be used for vplsIndex when creating entries in the vplsConfigTable MIB. The value 0 indicates that no value can be provided. The Metaswitch implementation returns a value that is currently available. The value returned is always one greater than the highest vplsIndex a vplsConfigTable entry exists for, or zero if this would not be within the valid range. Note however that the next attempt to create a new entry in the vplsConfigTable with this vplsIndex cannot be guaranteed to succeed; for example, it may fail because of memory constraints." ::= { l2vmEntityEntry 5 } l2vmEntityVpwsIndexNext OBJECT-TYPE SYNTAX NumericIndex MAX-ACCESS read-only STATUS current DESCRIPTION "This field indicates an appropriate value to be used for vpwsIndex when creating entries in the vpwsConfigTable MIB. The value 0 indicates that no value can be provided. The Metaswitch implementation returns a value that is currently available. The value returned is always one greater than the highest vpwsIndex a vpwsConfigTable entry exists for, or zero if this would not be within the valid range. Note however that the next attempt to create a new entry in the vpwsConfigTable with this vpwsIndex cannot be guaranteed to succeed; for example, it may fail because of memory constraints." ::= { l2vmEntityEntry 6 } l2vmEntityNbasePriority OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "N-BASE priority for this DC-L2VPN Manager entity. When multiple N-BASE processes have IPSs queued, then the supplied N-BASE scheduler prioritizes them according to the N-BASE priority of the processes involved. Processes with higher priority values will be scheduled earlier. This field is not suitable for network administrators." DEFVAL { 64 } ::= { l2vmEntityEntry 7 } l2vmEntityTimerGranularity OBJECT-TYPE SYNTAX Integer32 (1..1000) MAX-ACCESS read-create STATUS current DESCRIPTION "Clustered timer granularity for this DC-L2VPN Manager entity. Increasing this value reduces the accuracy of clustered timers, but might reduce the number of OS timer calls, improving performance. This field is not suitable for network administrators. This field cannot be changed after initial creation of the entity. Instead of changing this field, create a new DC-L2VPN Manager entity with the new value and destroy the old entity." DEFVAL { 10 } ::= { l2vmEntityEntry 8 } l2vmEntityRestartDuration OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-create STATUS current DESCRIPTION "The length of the audit period for the BDPI join after the entity activates. After a restart, bridge domain information is kept programmed until the end of the audit period. Increasing this value may improve the chance of not deprogramming and later reprogramming bridge domain state, at the cost of increasing the amount of time bridge domains and interfaces that are no longer needed after the restart remain programmed. This field is not suitable for network administrators. This field cannot be changed after initial creation of the entity. Instead of changing this field, create a new DC-L2VPN Manager entity with the new value and destroy the old entity." DEFVAL { 18000 } ::= { l2vmEntityEntry 9 } l2vmEntityRescheduleLimit OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum number of different objects that can be processed in a single schedule. When subcomponents are scheduled by receipt of an IPS or a timer pop, that IPS can cause more work than can be performed in a reasonable time without blocking the N-BASE. Subcomponents handle this by breaking off processing when they hit a processing limit. Higher values increase the processing efficiency of DC-L2VPN Manager instances, but can cause the scheduler to be blocked for excessive periods, causing timers to pop late. Lower values have the reverse effects. This field is not suitable for network administrators." DEFVAL { 1000 } ::= { l2vmEntityEntry 10 } l2vmEntityPvpiBufferPoolSize OBJECT-TYPE SYNTAX Integer32 (1..200) MAX-ACCESS read-create STATUS current DESCRIPTION "The size of the PVPI buffer pool. This determines the maximum number of buffers that can exist at once for the PVPI pool. DC-L2VPN Manager does not use pre-allocated pools, so the maximum number of buffers is also limited by memory availability, and so this number does not relate directly to memory usage. Buffer pools provide flow control, which is useful in ensuring efficient operation of the overall system. This field is not suitable for network administrators. This field cannot be changed after initial creation of the entity. Instead of changing this field, create a new DC-L2VPN Manager entity with the new value and destroy the old entity." DEFVAL { 10 } ::= { l2vmEntityEntry 11 } l2vmEntityRpiBufferPoolSize OBJECT-TYPE SYNTAX Integer32 (1..200) MAX-ACCESS read-create STATUS current DESCRIPTION "The size of the RPI buffer pool. In systems which are not using BGP auto-discovery there will be no RPI join and this field has no effect. This determines the maximum number of buffers that can exist at once for the RPI pool. DC-L2VPN Manager does not use pre-allocated pools, so the maximum number of buffers is also limited by memory availability, and so this number does not relate directly to memory usage. Buffer pools provide flow control, which is useful in ensuring efficient operation of the overall system. Setting any of the values to 0 gives infinite capacity buffer pools. This allows these pools to take up arbitrarily large amounts of memory, so is strongly discouraged. This field is not suitable for network administrators. This field cannot be changed after initial creation of the entity. Instead of changing this field, create a new DC-L2VPN Manager entity with the new value and destroy the old entity." DEFVAL { 10 } ::= { l2vmEntityEntry 12 } l2vmEntityRpiFailTimeout OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-create STATUS current DESCRIPTION "The length of time route information learned over the RPI join is retained for after the failure of the join. Increasing this value allows the RPI join more time to recover before treating the routes learned over the join as gone, but causes outdated state to remain programmed for longer. This field is not suitable for network administrators. This field cannot be changed after initial creation of the entity. Instead of changing this field, create a new DC-L2VPN Manager entity with the new value and destroy the old entity." DEFVAL { 3000 } ::= { l2vmEntityEntry 13 } l2vmEntityRetryInterval OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-create STATUS current DESCRIPTION "The retry interval for resource failures that are retried on a timer. This field is not suitable for network administrators. This field cannot be changed after initial creation of the entity. Instead of changing this field, create a new DC-L2VPN Manager entity with the new value and destroy the old entity." DEFVAL { 1000 } ::= { l2vmEntityEntry 14 } l2vmEntityVpnNotifEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "If this object is set to true(1), then DC-L2VM will emit VPN-scoped notifications, otherwise DC-L2VM will not emit VPN-scoped notifications." DEFVAL { false } ::= { l2vmEntityEntry 15 } l2vmEntityVpnNotifBufferPoolSize OBJECT-TYPE SYNTAX Integer32 (1..200) MAX-ACCESS read-create STATUS current DESCRIPTION "The size of the buffer pool that DC-L2VM uses for VPN-scoped notifcations. If this buffer pool is exhausted then DC-L2VM queues the notifications until more buffers are available. This field is not suitable for network administrators. This field cannot be changed after initial creation of the entity. Instead of changing this field, create a new DC-L2VPN Manager entity with the new value and destroy the old entity." DEFVAL { 10 } ::= { l2vmEntityEntry 16 } l2vmEntitySupportVpls OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Whether this DC-L2VPN Manager entity supports VPLSs (in addition to VPWSs) and VPWSs, or just VPWSs. If this field is set to true, this entity will not go oper up until a BDPI join is established. If this field is set to false, attempts to configure VPLSs and BDPI joins will be rejected. This field is not suitable for network administrators. This field cannot be changed after initial creation of the entity. Instead of changing this field, create a new DC-L2VPN Manager entity with the new value and destroy the old entity." DEFVAL { false } ::= { l2vmEntityEntry 17 } l2vmEntityBdpiBufferPoolSize OBJECT-TYPE SYNTAX Integer32 (1..200) MAX-ACCESS read-create STATUS current DESCRIPTION "The size of the BDPI buffer pool. This determines the maximum number of buffers that can exist at once for the BDPI pool. DC-L2VPN Manager does not use pre-allocated pools, so the maximum number of buffers is also limited by memory availability, and so this number does not relate directly to memory usage. Buffer pools provide flow control, which is useful in ensuring efficient operation of the overall system. This field is not suitable for network administrators. This field cannot be changed after initial creation of the entity. Instead of changing this field, create a new DC-L2VPN Manager entity with the new value and destroy the old entity." DEFVAL { 10 } ::= { l2vmEntityEntry 18 } -- End of DC-L2VPN Manager Entity Table. ------------------------------------------------------------------------------- -- -- DC-L2VPN Manager Master Join Table. -- l2vmMjTable OBJECT-TYPE -- FAMILY-SHORT-NAME L2VM_MJ SYNTAX SEQUENCE OF L2vmMjEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "DC-L2VPN Manager Master Join Table. This table controls the master joins that DC-L2VPN Manager creates with other FTEs. Each join is represented by a row in this table. Note: All fields in this MIB must map directly to equivalent fields in the AMB_AHSL_MJ MIB." ::= { l2vpnObjects 2 } l2vmMjEntry OBJECT-TYPE SYNTAX L2vmMjEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents a join for which DC-L2VPN Manager is master." INDEX { l2vmEntityIndex, l2vmMjInterfaceId, l2vmMjPartnerType, l2vmMjPartnerIndex, l2vmMjSubIndex } ::= { l2vmMjTable 1 } L2vmMjEntry ::= SEQUENCE { l2vmMjInterfaceId L2vmMjIfId, l2vmMjPartnerType Unsigned32, l2vmMjPartnerIndex Unsigned32, l2vmMjSubIndex Unsigned32, l2vmMjRowStatus RowStatus, l2vmMjAdminStatus AdminStatus, l2vmMjOperStatus OperStatus, l2vmMjJoinStatus MjStatus } l2vmMjInterfaceId OBJECT-TYPE SYNTAX L2vmMjIfId MAX-ACCESS not-accessible STATUS current DESCRIPTION "The interface type of the master join." ::= { l2vmMjEntry 2 } l2vmMjPartnerType OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Identifies the type of slave entity to join to. This can be used to distinguish between different entity types, both of whom provide the same interace. This index is used in the join user data, to enable FTI-specific code within System Manager to select a suitable slave entity. The numeric values for this index are defined by the particular interface that this join is for - see the relevant interface header file." ::= { l2vmMjEntry 3 } l2vmMjPartnerIndex OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Identifies the specific slave entity to join with. This index is used in the join user data, to enable FTI-specific code within System Manager to select a suitable slave entity." ::= { l2vmMjEntry 4 } l2vmMjSubIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Permits multiple joins between the same pair of entities." ::= { l2vmMjEntry 5 } l2vmMjRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status for this master join, used to create and destroy table entries." ::= { l2vmMjEntry 6 } l2vmMjAdminStatus OBJECT-TYPE SYNTAX AdminStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The administrative status of this master join, used to activate and deactivate the join." DEFVAL { adminStatusUp } ::= { l2vmMjEntry 7 } l2vmMjOperStatus OBJECT-TYPE SYNTAX OperStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The current operational state of this master join." ::= { l2vmMjEntry 8 } l2vmMjJoinStatus OBJECT-TYPE SYNTAX MjStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The detailed HAF status of the master join." ::= { l2vmMjEntry 9 } -- End of DC-L2VPN Manager Master Join Table. ------------------------------------------------------------------------------- -- -- DC-L2VPN Manager Slave Join Table (READ-ONLY). -- l2vmSjTable OBJECT-TYPE -- FAMILY-SHORT-NAME L2VM_SJ SYNTAX SEQUENCE OF L2vmSjEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "DC-L2VPN Manager Slave Join Table (read-only). This table reports the status of DC-L2VPN Manager's slave joins. Each join is represented by a row in this table. Note: All fields in this MIB must map directly to equivalent fields in the AMB_AHSL_SJ MIB." ::= { l2vpnObjects 3 } l2vmSjEntry OBJECT-TYPE SYNTAX L2vmSjEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents a join for which DC-L2VPN Manager is slave." INDEX { l2vmEntityIndex, l2vmSjInterfaceId, l2vmSjPartnerType, l2vmSjPartnerIndex, l2vmSjSubIndex } ::= { l2vmSjTable 1 } L2vmSjEntry ::= SEQUENCE { l2vmSjInterfaceId L2vmSjIfId, l2vmSjPartnerType Unsigned32, l2vmSjPartnerIndex Unsigned32, l2vmSjSubIndex Unsigned32, l2vmSjJoinStatus SjStatus } l2vmSjInterfaceId OBJECT-TYPE SYNTAX L2vmSjIfId MAX-ACCESS not-accessible STATUS current DESCRIPTION "The interface type of the slave join." ::= { l2vmSjEntry 2 } l2vmSjPartnerType OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The join master's entity type. The numeric values for this index are defined by the particular interface that this join is for - see the relevant interface header file." ::= { l2vmSjEntry 3 } l2vmSjPartnerIndex OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The join master's entity index." ::= { l2vmSjEntry 4 } l2vmSjSubIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Permits multiple joins between the same pair of entities." ::= { l2vmSjEntry 5 } l2vmSjJoinStatus OBJECT-TYPE SYNTAX SjStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The detailed HAF status of the slave join." ::= { l2vmSjEntry 6 } -- End of DC-L2VPN Manager Slave Join Table. ------------------------------------------------------------------------------- -- -- L2VPN BGP Route Target Config Table. -- l2vmBgpRTCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF L2vmBgpRTCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "L2VPN BGP Route Target Config Table. This table specifies the Route Targets that are imported and exported during BGP auto-discovery. In BGP auto-discovery each L2VPN instance advertises itself by originating a BGP L2VPN route and discovers other L2VPN instances by importing their BGP L2VPN routes. The Route Target configuration controls which L2VPN instances import which BGP L2VPN routes, and so determines which L2VPN instances discover each other and establish pseudowires. - When an L2VPN instance originates a BGP L2VPN route it includes its export Route Targets as extended community attributes in the BGP L2VPN route. - When an L2VPN instance receives a BGP L2VPN route it only imports the route if one of its import Route Targets matches the received route. - The result is that two L2VPN instances only discover each other if each exports a Route Target that the other imports. Each L2VPN instance that uses BGP auto-discovery must be configured with at least one Route Target, otherwise it will never discover other L2VPN instances (no import Route Target) and never be discovered by other L2VPN instances (no export Route Target). The simplest configuration is for each L2VPN instance to import and export a single Route Target that is unique to the L2VPN that it belongs to. This MIB table corresponds to vplsBgpRteTargetTable in draft-ietf-l2vpn-vpls-mib-10, and is also used for configuration of BGP Route Targets for VPWS instances that are provisioned using the colored-pools method." ::= { l2vpnObjects 4 } l2vmBgpRTCfgEntry OBJECT-TYPE SYNTAX L2vmBgpRTCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents a configured Route Target." INDEX { l2vmEntityIndex, l2vmBgpRTCfgVpnType, l2vmBgpRTCfgVpnIndex, l2vmBgpRTCfgIndex } ::= { l2vmBgpRTCfgTable 1 } L2vmBgpRTCfgEntry ::= SEQUENCE { l2vmBgpRTCfgVpnType L2vpnType, l2vmBgpRTCfgVpnIndex NumericIndex, l2vmBgpRTCfgIndex NumericIndex, l2vmBgpRTCfgRowStatus RowStatus, l2vmBgpRTCfgAdminStatus AdminStatus, l2vmBgpRTCfgOperStatus NpgOperStatus, l2vmBgpRTCfgType BgpRouteTargetType, l2vmBgpRTCfgRT BgpExtendedCommunity } l2vmBgpRTCfgVpnType OBJECT-TYPE SYNTAX L2vpnType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The route target configured in this MIB row applies to the L2VPN instance whose type is given by this field and whose instance index is given by l2vmBgpRTCfgVpnIndex." ::= { l2vmBgpRTCfgEntry 2 } l2vmBgpRTCfgVpnIndex OBJECT-TYPE SYNTAX NumericIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The route target configured in this MIB row applies to the L2VPN instance whose type is given by l2vmBgpRTCfgVpnType and whose instance index is given by this field. If l2vmBgpRTCfgVpnType is vpls then this field corresponds to vplsIndex. If l2vmBgpRTCfgVpnType is vpws then this field corresponds to vpwsIndex." ::= { l2vmBgpRTCfgEntry 3 } l2vmBgpRTCfgIndex OBJECT-TYPE SYNTAX NumericIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "This index identifies a particular route target that is configured for the L2VPN instance that is identified by l2vmBgpRTCfgVpnType and l2vmBgpRTCfgVpnIndex. It allows multiple route targets to be configured for a single L2VPN instance." ::= { l2vmBgpRTCfgEntry 4 } l2vmBgpRTCfgRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status for this Route Target Configuration Table entry, used to create and destroy table entries." ::= { l2vmBgpRTCfgEntry 5 } l2vmBgpRTCfgAdminStatus OBJECT-TYPE SYNTAX AdminStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The administrative status of this Route Target Configuration Table entry, used to activate and deactivate the entry." DEFVAL { adminStatusUp } ::= { l2vmBgpRTCfgEntry 6 } l2vmBgpRTCfgOperStatus OBJECT-TYPE SYNTAX NpgOperStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The current operational state of this Route Target Configuration Table entry." ::= { l2vmBgpRTCfgEntry 7 } l2vmBgpRTCfgType OBJECT-TYPE SYNTAX BgpRouteTargetType MAX-ACCESS read-create STATUS current DESCRIPTION "Used to define the type of a route target usage. Route targets can be specified to be imported, exported, or both. For a complete definition of a route target, see [RFC4364]." DEFVAL { both } ::= { l2vmBgpRTCfgEntry 8 } l2vmBgpRTCfgRT OBJECT-TYPE SYNTAX BgpExtendedCommunity MAX-ACCESS read-create STATUS current DESCRIPTION "The route target associated with the L2VPN service. This field must be set to a valid route target value to activate the Route Target Configuration table entry. (The default value of zero is not valid). In order to be a valid route target, the first two bytes of the field must indicate the type of the extended community. This should be one of the following. - 0x0002 to indicate a 2-byte AS-specific route target extended community. - 0x0102 to indicate an IPv4-address-specific route target extended community. - 0x0202 to indicate a 4-byte AS-specific route target extended community." DEFVAL { '0000000000000000'H } ::= { l2vmBgpRTCfgEntry 9 } -- End of BGP Auto-Discovery Route Target Config Table. ------------------------------------------------------------------------------- -- -- DC-L2VPN Manager module conformance statement -- l2vpnCompliances OBJECT IDENTIFIER ::= { l2vpnConformance 1 } l2vpnGroups OBJECT IDENTIFIER ::= { l2vpnConformance 2 } -- -- Module compliance is divided into three categories. -- - Support for those objects that configure a DC-L2VPN Manager entity -- (framework compliance). -- - Support for those objects that configure BGP auto-discovery parameters -- (BGP auto-discovery compliance). l2vpnFrameworkCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The module is implemented with support for configuration of the DC-L2VPN manager entity only." MODULE -- this module MANDATORY-GROUPS { l2vpnFrameworkGroup } ::= { l2vpnCompliances 1 } l2vmBgpADCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The module is implemented with support for configuration of the DC-L2VPN manager entity and BGP auto-discovery parameters." MODULE -- this module MANDATORY-GROUPS { l2vpnFrameworkGroup, l2vmBgpADGroup } ::= { l2vpnCompliances 2 } l2vpnFrameworkGroup OBJECT-GROUP OBJECTS { l2vmEntityRowStatus, l2vmEntityAdminStatus, l2vmEntityOperStatus, l2vmEntityVplsIndexNext, l2vmEntityVpwsIndexNext, l2vmEntityNbasePriority, l2vmEntityTimerGranularity, l2vmEntityRestartDuration, l2vmEntityRescheduleLimit, l2vmEntityPvpiBufferPoolSize, l2vmEntityRpiBufferPoolSize, l2vmEntityRpiFailTimeout, l2vmEntityRetryInterval, l2vmEntityVpnNotifEnable, l2vmEntityVpnNotifBufferPoolSize, l2vmEntitySupportVpls, l2vmEntityBdpiBufferPoolSize, l2vmMjRowStatus, l2vmMjAdminStatus, l2vmMjOperStatus, l2vmMjJoinStatus, l2vmSjJoinStatus } STATUS current DESCRIPTION "Objects relating to configuration of the DC-L2VPN Manager entity." ::= { l2vpnGroups 1 } l2vmBgpADGroup OBJECT-GROUP OBJECTS { l2vmBgpRTCfgRowStatus, l2vmBgpRTCfgAdminStatus, l2vmBgpRTCfgOperStatus, l2vmBgpRTCfgType, l2vmBgpRTCfgRT } STATUS current DESCRIPTION "Objects relating to configuration of BGP auto-discovery." ::= { l2vpnGroups 2 } ------------------------------------------------------------------------------- END