DC-CR-LDP-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, enterprises, Unsigned32, Integer32 FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF TEXTUAL-CONVENTION, TruthValue, RowStatus FROM SNMPv2-TC InterfaceIndexOrZero FROM IF-MIB; dccrldp MODULE-IDENTITY LAST-UPDATED "201412210000Z" -- December 21, 2014 ORGANIZATION "MRV Communications." CONTACT-INFO "For technical support, please contact your service channel" DESCRIPTION "The MIB module for management of the DC-CR-LDP product" -- Revision history REVISION "201412210000Z" -- December 21, 2014 DESCRIPTION "Initial edition." ::= { opx 15 } nbase OBJECT IDENTIFIER ::= { enterprises 629 } opx OBJECT IDENTIFIER ::= { nbase 10 } dccrldpObjects OBJECT IDENTIFIER ::= { dccrldp 1 } -- tables -- Textual Conventions. DcCrldpAdminStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The value determines the desired administrative status of a DC-CR-LDP table entry. The up and down states indicate that the traffic flow is enabled or disabled respectively for the protocol." SYNTAX INTEGER { up(1), -- ready to pass packets down(2) } DcCrldpOperStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The value determines the operational status of a DC-CR-LDP table entry. The up and down states indicate that the traffic flow is enabled or disabled respectively." SYNTAX INTEGER { up(1), -- active down(2), -- inactive goingUp(3), -- activating goingDown(4), -- deactivating actFailed(5) -- activation failed } DcCrldpIndex ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A general purpose SNMP index into the dcHafEntity table." SYNTAX Unsigned32 -- End of textual conventions -- The DC-CR-LDP Signaling MIB. This table is used to create an -- instance of DC-CR-LDP Signaling, and to change its operational state. dccrldpSigTable OBJECT-TYPE SYNTAX SEQUENCE OF DccrldpSigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of active instances of DC-CR-LDP Signaling." ::= { dccrldpObjects 1 } dccrldpSigEntry OBJECT-TYPE SYNTAX DccrldpSigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each of these entries represents an instance of DC-CR-LDP Signaling running in the HAF. Some of these instances will be the primary, and others may be backups." INDEX { dccrldpSigIndex } ::= { dccrldpSigTable 1 } DccrldpSigEntry ::= SEQUENCE { dccrldpSigIndex DcCrldpIndex, dccrldpSigPathManagerIndex DcCrldpIndex, dccrldpSigLsrIndex Unsigned32, dccrldpSigSocketIfIndex InterfaceIndexOrZero, dccrldpSigSessionBufPoolSize Integer32, dccrldpSigEMBufPoolSize Integer32, dccrldpSigAMBufPoolSize Integer32, dccrldpSigAdminStatus DcCrldpAdminStatus, dccrldpSigOperStatus DcCrldpOperStatus, dccrldpSigRowStatus RowStatus, dccrldpSigUseI3Interface TruthValue, dccrldpSigConformanceFlags BITS, dccrldpSigUseIPv6Transport TruthValue, dccrldpSigSessStatusTrapEnable TruthValue, dccrldpSigSessThreshTrapEnable TruthValue, dccrldpSigPathVecLimitTrapEnable TruthValue, dccrldpSigBfdProviderIndex Integer32 } dccrldpSigIndex OBJECT-TYPE SYNTAX DcCrldpIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of this dccrldpSigEntry. This is the HAF entity index passed on the product create parameters." ::= { dccrldpSigEntry 1 } dccrldpSigPathManagerIndex OBJECT-TYPE SYNTAX DcCrldpIndex MAX-ACCESS read-create STATUS current DESCRIPTION "The index of the Path Manager instance to which this instance of Signaling is to join. See dccrldpPmTable." DEFVAL { 0 } ::= { dccrldpSigEntry 2 } dccrldpSigLsrIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The index of the DC-LMGR product instance to which this DC-CR-LDP Signaling is to join as its LDB interface provider. See dclmgrLsrEntityTable." DEFVAL { 0 } ::= { dccrldpSigEntry 3 } dccrldpSigSocketIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "Management assigned interface identifier for the IP Sockets component interface to DC-CR-LDP Signalling." DEFVAL { 0 } ::= { dccrldpSigEntry 4 } dccrldpSigSessionBufPoolSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The number of pre-reserved buffers available for sending sockets and LDI messages for each LDP session. This is used to pace the sockets and LDI data flows for each LDP session." DEFVAL { 8 } ::= { dccrldpSigEntry 5 } dccrldpSigEMBufPoolSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The number of pre-reserved buffers available for sending sockets, LDBI, NHR and I3 messages within Entity Manager This is used to pace Entity Manager's sockets, LDBI, NHR and I3 data flows." DEFVAL { 8 } ::= { dccrldpSigEntry 6 } dccrldpSigAMBufPoolSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The number of pre-reserved buffers available for sending sockets messages within Adjacency Manager. This is used to pace Adjacency Manager's sockets data flows." DEFVAL { 8 } ::= { dccrldpSigEntry 7 } dccrldpSigAdminStatus OBJECT-TYPE SYNTAX DcCrldpAdminStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to activate the DC-CR-LDP Signaling instance." DEFVAL { up } ::= { dccrldpSigEntry 8 } dccrldpSigOperStatus OBJECT-TYPE SYNTAX DcCrldpOperStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The current operational status of this instance of DC-CR-LDP Signaling." ::= { dccrldpSigEntry 9 } dccrldpSigRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Used to create and delete a DC-CR-LDP Signaling Table entry. When this object is set to 'active', only the dccrldpSigAdminStatus object in the row may be modified." ::= { dccrldpSigEntry 10 } dccrldpSigUseI3Interface OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Used to indicate whether this DC-CR-LDP Signaling instance should use the I3 interface or the IPR interface to determine information regarding local interface configuration. Use of the IPR interface is deprecated, but nevertheless this field defaults to its use for back-compatibility reasons." DEFVAL { false } ::= { dccrldpSigEntry 11 } dccrldpSigConformanceFlags OBJECT-TYPE SYNTAX BITS { maxPduLen (0) } MAX-ACCESS read-create STATUS current DESCRIPTION "Flags specifying how DC-LDP Session Controller should behave in situations either where the interpretation of strict conformance is debatable, or where strictly conformant behavior contradicts the general IETF principle of being liberal on receipt. maxPduLen If set, this flag means that DC-LDP should abort session initialization if the peer (in the passive role) proposes a max PDU length that is larger than DC-LDP's proposed value. The interpretation here is that the passive peer's value should be the already negotiated value, not its raw value." DEFVAL { {} } ::= { dccrldpSigEntry 12 } dccrldpSigUseIPv6Transport OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Used to indicate whether the DC-CR-LDP signaling is to use IPv6 transport where possible. Note that if DC-LDP is configured with an IPv4 transport address, IPv4 transport will be used for multicast and IPv6 sockets using a IPv4 mapped IPv6 address will be used for unicast when this field is set to True." DEFVAL { false } ::= { dccrldpSigEntry 13 } dccrldpSigSessStatusTrapEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "If this object is true, then it enables the generation of mplsLdpSessionUp and mplsLdpSessionDown traps, otherwise these traps are not generated." DEFVAL { false } ::= { dccrldpSigEntry 14 } dccrldpSigSessThreshTrapEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "If this object is true, then it enables the generation of mplsLdpInitSessionThresholdExceeded traps, otherwise these traps are not generated." DEFVAL { false } ::= { dccrldpSigEntry 15 } dccrldpSigPathVecLimitTrapEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "If this object is true, then it enables the generation of mplsLdpPathVectorLimitMismatch traps, otherwise these traps are not generated." DEFVAL { false } ::= { dccrldpSigEntry 16 } dccrldpSigBfdProviderIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The index of the BFDI provider instance to which this DC-LDP Signaling is to join as its BFD interface provider. See bfdEntityTable. Zero indicates that no BFDI provider is available, or that DC-LDP Signaling should not join to any BFDI provider." DEFVAL { 0 } ::= { dccrldpSigEntry 17 } -- The DC-CR-LDP Path Manager MIB. This table is used to create an -- instance of DC-CR-LDP Path Manager, and to change its operational state. dccrldpPmTable OBJECT-TYPE SYNTAX SEQUENCE OF DccrldpPmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of active instances of DC-CR-LDP Path Manager." ::= { dccrldpObjects 2 } dccrldpPmEntry OBJECT-TYPE SYNTAX DccrldpPmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each of these entries represents an instance of DC-CR-LDP Path Manager running in the HAF. Some of these instances will be the primary, and others may be backups." INDEX { dccrldpPmIndex } ::= { dccrldpPmTable 1 } DccrldpPmEntry ::= SEQUENCE { dccrldpPmIndex DcCrldpIndex, dccrldpPmLsrIndex Unsigned32, dccrldpPmLdpEntityAutoCreate TruthValue, dccrldpPmLdpEntityAutoStart TruthValue, dccrldpPmLdpEntityReuse TruthValue, dccrldpPmLdpVersion INTEGER, dccrldpPmUseLdpFt TruthValue, dccrldpPmAsNumber Integer32, dccrldpPmIprBufPoolSize Integer32, dccrldpPmLdpSupported TruthValue, dccrldpPmCrLdpSupported TruthValue, dccrldpPmQueryFECSupported TruthValue, dccrldpPmAdminStatus DcCrldpAdminStatus, dccrldpPmOperStatus DcCrldpOperStatus, dccrldpPmRowStatus RowStatus, dccrldpPmRestartCapable TruthValue, dccrldpPmReconnectTime Integer32, dccrldpPmRecoveryTime Integer32, dccrldpPmMaxPeerReconnect Integer32, dccrldpPmMaxPeerRecovery Integer32, dccrldpPmAdjDwnHoldTime Integer32, dccrldpPmOutSegProgOrder INTEGER, dccrldpPmSupportIpv6 TruthValue, dccrldpPmPolicySupportFlags BITS, dccrldpPmCheckOutSegIntfaceStat TruthValue, dccrldpPmLdpEntityCreateNhrLdb TruthValue, dccrldpPmLdpEntityCreatePsiJoin TruthValue, dccrldpPmRedundancySwitchIntvl Integer32, dccrldpPmLabelWithdrawDelay Integer32, dccrldpPmImplicitXcVcFecs TruthValue, dccrldpPmWthdrwDownstreamLbl TruthValue, dccrldpPmIngressReleaseDelay TruthValue, dccrldpPmPwFastUpstreamRelease TruthValue } dccrldpPmIndex OBJECT-TYPE SYNTAX DcCrldpIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of this dccrldpPmEntry. This is the HAF entity index passed on the product create parameters." ::= { dccrldpPmEntry 1 } dccrldpPmLsrIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The index of the DC-LMGR product instance to which this DC-CR-LDP Path Manager is to join as its LDB interface provider. See dclmgrLsrEntityTable." DEFVAL { 0 } ::= { dccrldpPmEntry 2 } dccrldpPmLdpEntityAutoCreate OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "When set to 'true', the Entity Manager component of DC-CR-LDP creates Entities automatically based on interfaces known to Entity Manager. When set to 'false' Entities are not automatically created." DEFVAL { true } ::= { dccrldpPmEntry 3 } dccrldpPmLdpEntityAutoStart OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "When set to 'true', the Entity Manager component of DC-CR-LDP automatically starts Entities. Both configured and automatically created Entities are automatically started. When set to 'false' Entities are not automatically started." DEFVAL { true } ::= { dccrldpPmEntry 4 } dccrldpPmLdpEntityReuse OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "When set to 'true', the same Entity can be used for multiple interfaces. That is, the per-platform label space behaves as a per-interface label space. When set to 'false', the same entity cannot be used for multiple interfaces." DEFVAL { true } ::= { dccrldpPmEntry 5 } dccrldpPmLdpVersion OBJECT-TYPE SYNTAX INTEGER { version1(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "An indication of the LDP version supported." DEFVAL { 1 } ::= { dccrldpPmEntry 6 } dccrldpPmUseLdpFt OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "When set to 'true', DC-CR-LDP implements fault tolerance procedures for LDP and CR-LDP. When set to 'false', fault tolerance procedures are not used." DEFVAL { false } ::= { dccrldpPmEntry 7 } dccrldpPmAsNumber OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The number identifying the autonomous system (AS) to which this node belongs." ::= { dccrldpPmEntry 8 } dccrldpPmIprBufPoolSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The size of the buffer pool used for sending either (deprecated) IPRI messages or for sending NHR and I3 messages. This is used to pace IPR/NHR+I3 data flows from PM." DEFVAL { 8 } ::= { dccrldpPmEntry 9 } dccrldpPmLdpSupported OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "When set to 'true', DC-CR-LDP implements LDP functionality. When set to 'false' received LDP requests are rejected. Note that at least one of dccrldpPmLdpSupported and dccrldpPmCrLdpSupported must be set to 'true' before activating a dccrldpPmTable row. Both dccrldpPmLdpSupported and dccrldpPmCrLdpSupported may be set to 'true'." DEFVAL { false } ::= { dccrldpPmEntry 10 } dccrldpPmCrLdpSupported OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "When set to 'true', DC-CR-LDP implements CR-LDP functionality. When set to 'false' received CR-LDP requests are rejected. Note that at least one of dccrldpPmLdpSupported and dccrldpPmCrLdpSupported must be set to 'true' before activating a dccrldpPmTable row. Both dccrldpPmLdpSupported and dccrldpPmCrLdpSupported may be set to 'true'." DEFVAL { false } ::= { dccrldpPmEntry 11 } dccrldpPmQueryFECSupported OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "When set to 'true', DC-CR-LDP queries the routing stub when a label mapping for an unrecognized FEC is received to determine whether the FEC should be recognized and the corresponding switch programming performed or not. If set to 'false' DC-CR-LDP creates a dummy FEC for the mapping and retains or releases the mapping based on the label retention policy for the session." DEFVAL { false } ::= { dccrldpPmEntry 12 } dccrldpPmAdminStatus OBJECT-TYPE SYNTAX DcCrldpAdminStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to activate the DC-CR-LDP Path Manager instance." DEFVAL { up } ::= { dccrldpPmEntry 13 } dccrldpPmOperStatus OBJECT-TYPE SYNTAX DcCrldpOperStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The current operational status of this instance of DC-CR-LDP Path Manager." ::= { dccrldpPmEntry 14 } dccrldpPmRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Used to create and delete a DC-CR-LDP Path Manager Table entry. When this object is set to 'active', only the dccrldpPmAdminStatus object in the row may be modified." ::= { dccrldpPmEntry 15 } dccrldpPmRestartCapable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "A flag to indicate whether the local node should advertise itself as LDP restart capable if the Label Switch Controller or Label Data Forwarder is capable of supporting the required procedures." DEFVAL { false } ::= { dccrldpPmEntry 16 } dccrldpPmReconnectTime OBJECT-TYPE SYNTAX Integer32(0..2147483647) UNITS "milliseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The time that the local node takes to restart LDP and bring up the LDP sessions. This is advertised to neighbors in the FT Session TLV in Initialization messages. The value chosen should be large enough for LDP to be terminated and restarted. Only used if dccrldpPmRestartCapable is set to true." DEFVAL { 60000 } ::= { dccrldpPmEntry 17 } dccrldpPmRecoveryTime OBJECT-TYPE SYNTAX Integer32(0..2147483647) UNITS "milliseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The period of time that the local node is willing to retain its MPLS forwarding state, if any, that it preserved across the restart. The time is from the end of the restart time configured above. This field is used to calculate the Recovery Time for both Control Plane and Control Channel restarts. It is used to calculate the Recovery Time advertised in the FT Session TLV in the Initialization message sent to the neighbor. Only used if dccrldpPmRestartCapable is set to true." DEFVAL { 180000 } ::= { dccrldpPmEntry 18 } dccrldpPmMaxPeerReconnect OBJECT-TYPE SYNTAX Integer32(0..2147483647) UNITS "milliseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum period of time that LDP should wait for a restart capable neighbor to restore an LDP session. LDP waits for the minimum of this time and the Reconnect Timeout advertised in the FT Session TLV in the Initialization message from the neighbor. Only used if dccrldpPmRestartCapable is set to true." DEFVAL { 180000 } ::= { dccrldpPmEntry 19 } dccrldpPmMaxPeerRecovery OBJECT-TYPE SYNTAX Integer32(0..2147483647) UNITS "milliseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum period of time that LDP should wait for a restart capable neighbor to refresh Label Mappings previously received from that neighbor before deleting the stale bindings. LDP waits for the minimum of this time and the Recovery Time advertised in the FT Session TLV in the Initialization message from the neighbor. This value is not used to set the Recovery Time advertised in the FT Session TLV in the Initialization message sent to the neighbor. Only used if dccrldpPmRestartCapable is set to true." DEFVAL { 240000 } ::= { dccrldpPmEntry 20 } dccrldpPmAdjDwnHoldTime OBJECT-TYPE SYNTAX Integer32(0..2147483647) UNITS "milliseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The time to hold a failed LDP Hello adjacency to distinguish between LDP peer failure and interface failure. This field is used to ensure that LDP retains adjacency multi-link LSPs during peer restart recovery when the peer restarts and an LDP Hello adjacency goes down before the LDP session. When an LDP Hello adjacency fails, Path Manager waits until the adjacency holding timer expires before tearing down any LSP out segments associated with the adjacency. If the LDP session fails before the adjacency holding timer expires, Path Manager performs peer restart recovery instead of tearing down any LSP out segments. If the adjacency holding timer expires and the LDP session is still active then Path Manager assumes that the interface has failed but the peer is still active. In this case Path Manager tears down LSP out segments associated with the adjacency. The value chosen should be large enough for the LDP session to fail if the LDP peer has failed. Only used if _restart_capable_ is set to AMB_TRUE, and cannot be modified when the _row_status_ is ACTIVE." DEFVAL { 3000 } ::= {dccrldpPmEntry 21 } dccrldpPmOutSegProgOrder OBJECT-TYPE SYNTAX INTEGER { default(0), connFirst(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "This determines the order in which LDP connects and releases out segments. default: This will release all out-segments on a session before programming new out-segments on the same session. No ordering for out-segments across different sessions is enforced when ECMP is in use. connFirst: This mode forces all the out-segments for an LSP to be programmed before any out-segments are released. This ordering is only supported if the LSC stub supports implicit XCs." DEFVAL { default } ::= {dccrldpPmEntry 22 } dccrldpPmSupportIpv6 OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This field indicates whether LDP Path Manager supports IPv6 addresses, FECs and routes. If this field is set to false then no IPv6 addresses will be accepted over the NHR and I3 interfaces and all LDP protocol messages for IPv6 addresses or FECs will be returned to the peer as an LDP status code of 'Unsupported Address Family'." DEFVAL { false } ::= {dccrldpPmEntry 23 } dccrldpPmPolicySupportFlags OBJECT-TYPE SYNTAX BITS { policySupported(0), perFecOptimizationSupported(1), suppressAddressPolicy(2), policyForVCFECs(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "This field contains bit flags which indicate whether DC-LDP supports LDP Policy and if per FEC policy optimization is to be used. The supported bit flags are - policySupported - perFecOptimizationSupported - suppressAddressPolicy - policyForVCFECs. The policySupported flag indicates that DC-LDP will enforce policy decisions made by the user through a number of user exits. If this flag is not set DC-LDP will not call policy user exits. The perFecOptimizationSupported flag indicates that DC-LDP provides policy on a per FEC basis as opposed to a per FEC per session basis. This results in policy user exits only being called once per FEC. This field is only significant if the policySupported flag is set. This feature is used to reduce the number of calls to the Policy User Exits particularly when a change in Policy is being implemented. If the perFecOptimizationSupported flag is not set then DC-LDP Path Manager enforces policy on a per FEC per peer basis. If this flag is set policy is enforced on a per FEC basis and the same policy decision is assumed to apply for all peers. The suppressAddressPolicy flag if set prevents DC-LDP from performing any Policy processing on receipt of a Address or Address Withdraw message from a peer. If this field is not set then its default value is determined by the RCP_USER_DO_POLICY compile time flag. The policyForVCFECs flag indicates that DC-LDP should call the policy user exits for VC-FECs. The default behavior is not to call the policy user exits for VC-FECs. Changes to the value of policy_support_flags are not permitted whilst the MIB row is active." ::= {dccrldpPmEntry 24 } dccrldpPmCheckOutSegIntfaceStat OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This field indicates whether LDP Path Manager makes the programming of each out segment conditional on the status of the interface where the out segment is programmed. When set to false, LDP Path Manager assumes that the availability of interfaces for programming is reflected in the adjacency and session information that it receives from LDP Session Controller, and in the routing information that it receives from the NHR stub. When set to true, LDP Path Manager tracks interface status itself and uses this in addition to input from LDP Session Controller and the NHR stub to decide whether an out segment should be programmed on a particular interface. If the other inputs indicate 'yes', but the relevant interface is (or goes) down, LDP Path Manager will not program that out segment (or will remove the existing out segment on that interface). This field cannot be changed when the row is active." DEFVAL { false } ::= {dccrldpPmEntry 25 } dccrldpPmLdpEntityCreateNhrLdb OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "When set to 'true', LDP Path Manager creates joins to the NHR stub and Label Manager as part of activation. This field cannot be changed when the row is active." DEFVAL { true } ::= { dccrldpPmEntry 26 } dccrldpPmLdpEntityCreatePsiJoin OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "When set to 'true', LDP Path Manager creates a PSI join to an instance of DC-TPM as part of activation. This field cannot be changed when the row is active." DEFVAL { false } ::= { dccrldpPmEntry 27 } dccrldpPmRedundancySwitchIntvl OBJECT-TYPE SYNTAX Integer32(1..2147483647) UNITS "milliseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The time interval that DC-MPLS will use in pseudowire redundancy when attempting a switchover, before it determines that switchover has failed." DEFVAL { 20000 } ::= { dccrldpPmEntry 28 } dccrldpPmLabelWithdrawDelay OBJECT-TYPE SYNTAX Integer32(0..200000) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The time interval during which Label Withdraws will not be sent upstream after an event occurs that would otherwise cause Label Withdraws to be sent. The only events to which this does not apply are - FEC deletion - receipt of a Label Withdraw from downstream withdrawing the last downstream label for a FEC - any event triggered by the LDP policy user exits. The interval does not apply for - PW FECs, or CR-LDP LSPs - downstream sessions using Downstream-on-Demand mode - nodes using independent control." DEFVAL { 0 } ::= { dccrldpPmEntry 29 } dccrldpPmImplicitXcVcFecs OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Whether to use implicit XCs for VC FECs. This feature is deprecated. Implicit XCs are required for ECMP FECs, and are enabled automatically if support for them is advertised over the LDBI, which is dependent on the LSI stub advertising equivalent support. Implicit XCs do not provide any functional benefit for VC FECs, and it is recommended that the explicit XCs are used for them. However if implicit XC support is desired for all FECs then this field can be used to enable it for VC FECs. This field will have no effect if implicit XCs are not supported over the LDBI, or if there is no LDBI join. This field cannot be changed when the row is active." DEFVAL { false } ::= { dccrldpPmEntry 30 } dccrldpPmWthdrwDownstreamLbl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "DC-LDP sends label mappings to all upstream peers. Sometimes, due to a change of next hop from IP Routing or a new address from the peer, a peer may change from being upstream to being a downstream peer. This results in the label we sent to the peer no longer being necessary. When set to 'false', these labels are retained (if liberal retention) or released (if conservative retention) by the peer. This is generally desirable, since it has no impact on the data plane and reduces the work for the control plane when a new peer is created. When set to 'true', these labels will be withdrawn when DC-LDP detects the condition. This is sometimes desirable when a network operator requires consistency between labels distributed and labels programmed to the data plane, but cannot use conservative retention mode. This field can be changed at any time, but if changed to 'true' it will only apply to new sessions." DEFVAL { false } ::= { dccrldpPmEntry 31 } dccrldpPmIngressReleaseDelay OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Whether to use the dccrldpPmLabelWithdrawDelay timer to also prevent immediate switch deprogramming at ingress." DEFVAL { false } ::= { dccrldpPmEntry 32 } dccrldpPmPwFastUpstreamRelease OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Whether to release upstream programmed PW state immediately when DC-LDP sends a Label Withdraw, instead of waiting for a Label Release / session-down event." DEFVAL { false } ::= { dccrldpPmEntry 33 } -- Module compliance. -- Conformance Information. dccrldpConformance OBJECT IDENTIFIER ::= { dccrldp 2 } dccrldpCompliances OBJECT IDENTIFIER ::= { dccrldpConformance 1 } dccrldpGroups OBJECT IDENTIFIER ::= { dccrldpConformance 2 } dccrldpMibCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for the DC-TEMIB product." MODULE MANDATORY-GROUPS { dccrldpMandatoryGroup } GROUP dccrldpOptionalGroup DESCRIPTION "Optional TeMib objects." ::= { dccrldpCompliances 1 } -- Units of conformance. dccrldpMandatoryGroup OBJECT-GROUP OBJECTS { dccrldpSigPathManagerIndex, dccrldpSigLsrIndex, dccrldpSigSocketIfIndex, dccrldpSigRowStatus, dccrldpPmLsrIndex, dccrldpPmRowStatus } STATUS current DESCRIPTION "Mandatory Objects." ::= { dccrldpGroups 2 } dccrldpOptionalGroup OBJECT-GROUP OBJECTS { dccrldpSigSessionBufPoolSize, dccrldpSigEMBufPoolSize, dccrldpSigAMBufPoolSize, dccrldpSigAdminStatus, dccrldpSigOperStatus, dccrldpSigRowStatus, dccrldpSigUseI3Interface, dccrldpSigConformanceFlags, dccrldpSigUseIPv6Transport, dccrldpSigSessStatusTrapEnable, dccrldpSigSessThreshTrapEnable, dccrldpSigPathVecLimitTrapEnable, dccrldpSigBfdProviderIndex, dccrldpPmLdpEntityAutoCreate, dccrldpPmLdpEntityAutoStart, dccrldpPmLdpEntityReuse, dccrldpPmLdpVersion, dccrldpPmUseLdpFt, dccrldpPmAsNumber, dccrldpPmIprBufPoolSize, dccrldpPmLdpSupported, dccrldpPmCrLdpSupported, dccrldpPmQueryFECSupported, dccrldpPmAdminStatus, dccrldpPmOperStatus, dccrldpPmRowStatus, dccrldpPmRestartCapable, dccrldpPmReconnectTime, dccrldpPmRecoveryTime, dccrldpPmMaxPeerReconnect, dccrldpPmMaxPeerRecovery, dccrldpPmAdjDwnHoldTime, dccrldpPmOutSegProgOrder, dccrldpPmSupportIpv6, dccrldpPmPolicySupportFlags, dccrldpPmCheckOutSegIntfaceStat, dccrldpPmLdpEntityCreateNhrLdb, dccrldpPmLdpEntityCreatePsiJoin, dccrldpPmRedundancySwitchIntvl, dccrldpPmLabelWithdrawDelay, dccrldpPmImplicitXcVcFecs, dccrldpPmWthdrwDownstreamLbl, dccrldpPmIngressReleaseDelay, dccrldpPmPwFastUpstreamRelease } STATUS current DESCRIPTION "Optional Objects." ::= { dccrldpGroups 3 } END