-- Copyright 1999 MITEL Corporation -- All rights reserved. -- This MITEL SNMP Management Information Base Specification -- (Specification) embodies MITEL's confidential and -- proprietary intellectual property. MITEL retains all -- title and ownership in the Specification, including any -- revisions. -- This Specification is supplied "AS IS", and MITEL makes -- no warranty, either express or implied, as to the use, -- operation, condition, or performance of the Specification. MITEL-IPVIRTUAL-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, enterprises, Integer32, Counter32, IpAddress FROM SNMPv2-SMI RowStatus FROM SNMPv2-TC; mitelIpGrpIpVirtualGroup MODULE-IDENTITY LAST-UPDATED "200303240931Z" ORGANIZATION "MITEL Corporation" CONTACT-INFO "Standards Group, Postal: MITEL Corporation 350 Legget Drive, PO Box 13089 Kanata, Ontario Canada K2K 1X3 Tel: +1 613 592 2122 Fax: +1 613 592 4784 E-mail: std@mitel.com" DESCRIPTION "The MITEL IP MIB module." REVISION "200303240931Z" DESCRIPTION "Convert to SMIv2" REVISION "199903010000Z" DESCRIPTION "IP MIB Version 1.0" ::= { mitelRouterIpGroup 4 } mitel OBJECT IDENTIFIER ::= { enterprises 1027} mitelProprietary OBJECT IDENTIFIER ::= { mitel 4} mitelPropIpNetworking OBJECT IDENTIFIER ::= { mitelProprietary 8 } mitelIpNetRouter OBJECT IDENTIFIER ::= { mitelPropIpNetworking 1 } mitelRouterIpGroup OBJECT IDENTIFIER ::= { mitelIpNetRouter 1} -- -- -- The IP Virtual Port Configuration Table. -- mitelIpVGrpPortTable OBJECT-TYPE SYNTAX SEQUENCE OF MitelIpVGrpPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to display and configure IP virtual port information. Each logical LAN destination may have one or more IP virtuals." ::= { mitelIpGrpIpVirtualGroup 1 } mitelIpVGrpPortEntry OBJECT-TYPE SYNTAX MitelIpVGrpPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry in this table contains configuration information specific to a single IP interface." INDEX { mitelIpVGrpPortTableNetAddr , mitelIpVGrpPortTableIfIndex } ::= { mitelIpVGrpPortTable 1 } MitelIpVGrpPortEntry ::= SEQUENCE { mitelIpVGrpPortTableNetAddr IpAddress, mitelIpVGrpPortTableNetMask IpAddress, mitelIpVGrpPortTableIfIndex Integer32, mitelIpVGrpPortTableStatus RowStatus, mitelIpVGrpPortTableCfgMethod INTEGER } mitelIpVGrpPortTableNetAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address that uniquely identifies this entry." ::= { mitelIpVGrpPortEntry 1 } mitelIpVGrpPortTableNetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The subnet mask assigned to this entry." ::= { mitelIpVGrpPortEntry 2 } mitelIpVGrpPortTableIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The interface that this virtual is associated with." ::= { mitelIpVGrpPortEntry 11 } mitelIpVGrpPortTableStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The current status of this entry." REFERENCE "Textual Conventions for Version 2 of the Simple Network Management Protocol (RFC 1443)." ::= { mitelIpVGrpPortEntry 12 } mitelIpVGrpPortTableCfgMethod OBJECT-TYPE SYNTAX INTEGER { static(1), addressless(2), dhcp(3), ipcp(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Determines how this virtual interface is configured. `static' and `addressless' indicate that all information is provided by the SNMP manager, while `dhcp' and `ipcp' indicate that some or all of the information is obtained dynamically. `static' and `dhcp' interfaces connect to multipoint networks, in which case the mitelIpVGrpPortTableNetMask indicates the IP subnet on that network. `addressless' and `ipcp' interfaces connect to point-to-point networks, and in these cases the mitelIpVGrpPortTableNetMask is set to 255.255.255.255 and the corresponding IP address is that of the system at the other end of the link." ::= { mitelIpVGrpPortEntry 15 } -- -- -- The IP Virtual Port RIP Table. -- mitelIpVGrpRipTable OBJECT-TYPE SYNTAX SEQUENCE OF MitelIpVGrpRipEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains RIP statistics per IP virtual interfaces." ::= { mitelIpGrpIpVirtualGroup 2 } mitelIpVGrpRipEntry OBJECT-TYPE SYNTAX MitelIpVGrpRipEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry in this table contains RIP statistics specific to a single IP interface." INDEX { mitelIpVGrpTableRipIpAddr } ::= { mitelIpVGrpRipTable 1 } MitelIpVGrpRipEntry ::= SEQUENCE { mitelIpVGrpTableRipIpAddr IpAddress, mitelIpVGrpTableRipRxPkts Counter32, mitelIpVGrpTableRipRxBadPkts Counter32, mitelIpVGrpTableRipRxBadRtes Counter32, mitelIpVGrpTableRipTxUpdates Counter32 } mitelIpVGrpTableRipIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP Address that uniquely defines this entry" ::= { mitelIpVGrpRipEntry 1} mitelIpVGrpTableRipRxPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of RIP packets regardless of RIP type received on this virtual port." ::= { mitelIpVGrpRipEntry 2 } mitelIpVGrpTableRipRxBadPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of received packets that contained incorrect header/packet definition (ie: unsupported version(0), non-zero must be zero fields)." ::= { mitelIpVGrpRipEntry 3 } mitelIpVGrpTableRipRxBadRtes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of received packet entries that contained bad route information (ie: unsupported family(AF_INET), bad metric or a bad network address." ::= { mitelIpVGrpRipEntry 4 } mitelIpVGrpTableRipTxUpdates OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of updates sent on this interface." ::= { mitelIpVGrpRipEntry 5 } END --MITEL-IPVIRTUAL-GROUP