G6-LOGGING-MIB DEFINITIONS ::= BEGIN

IMPORTS
	MODULE-IDENTITY, OBJECT-TYPE, Integer32, Unsigned32, Counter32, enterprises,NOTIFICATION-TYPE
		FROM SNMPv2-SMI
	DisplayString, MacAddress
		FROM SNMPv2-TC
	g6	FROM MICROSENS-G6-MIB
	;

management MODULE-IDENTITY --Category
	LAST-UPDATED "201802121619Z"
	ORGANIZATION "MICROSENS GmbH & Co. KG"
	CONTACT-INFO
		"Kueferstrasse 16
		D-59067 Hamm
		Germany
		support@microsens.de
		http://www.microsens.de"
	DESCRIPTION
		"Microsens private MIB for Generation 6 Ethernet Switches"

	REVISION "201802121619Z"
	DESCRIPTION
		"File creation"
	::= { g6 3 }

logging  OBJECT IDENTIFIER ::= { management 71 }



-- *************************** CONFIGURATION SECTION ********************************


loggingSendTestEvent OBJECT-TYPE   -- send_test_event
	SYNTAX DisplayString
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
	"Creates an ALIVE_TEST event. This may be used to check out log functionality. Hint: The severeness of the ALIVE_TEST event may be changed to try out alarm thresholds."
	::= { logging 1 }


loggingLogFileStorage OBJECT-TYPE   -- log_file_storage
	SYNTAX INTEGER 
		{
		ramDisk (0),
		sdCard (1)
		}
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
	"Select the storage type of the logfile. Writing to SD card protects the file against reboot but significantly increases SD card write cycles."
	::= { logging 2 }


-- ******************* Begin of targetTable *************************

targetTable	OBJECT-TYPE
	SYNTAX SEQUENCE OF TargetEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
		"An unlimited number of syslog receivers may be specified."
	::= { logging 3 }

targetEntry	OBJECT-TYPE
	SYNTAX TargetEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
		""
	INDEX { targetIndex }
	::= { targetTable 1 }


	TargetEntry ::= SEQUENCE {
	targetIndex INTEGER,
	targetAlias DisplayString,
	targetHostAddress DisplayString,
	targetLogType INTEGER ,
	targetDetailLevel INTEGER ,
	targetMessageFormat INTEGER ,
	targetTrapType INTEGER ,
	targetTrapCommunity DisplayString,
	targetSnmpV3Username DisplayString,
	targetMinimumSeverity INTEGER ,
	targetRequiredRelevance INTEGER ,
	targetRequiredSource INTEGER ,
	targetLogConfigChanges INTEGER ,
	targetLogDebugEventsOnly INTEGER 
	}

targetIndex	OBJECT-TYPE
	SYNTAX INTEGER (0..15)
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
		"Automatically generated"
	::= { targetEntry 1 }

targetAlias OBJECT-TYPE   -- alias
	SYNTAX DisplayString
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
	"Name of this syslog entry for reference."
	::= { targetEntry 2 }

targetHostAddress OBJECT-TYPE   -- host_address
	SYNTAX DisplayString
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
	"IP address or hostname to the syslog server or snmp manager. Leave empty for local targets such as CLI or recent logs buffer."
	::= { targetEntry 3 }

targetLogType OBJECT-TYPE   -- log_type
	SYNTAX INTEGER 
		{
		disabled (0),
		syslog (1),
		snmpTrapV1 (2),
		snmpTrapV2c (3),
		snmpTrapV3 (4),
		snmpInformV2c (5),
		snmpInformV3 (6),
		displayInCli (7),
		recentLogs (8)
		}
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
	"Specifes the type of event forwarding to match the desired manager."
	::= { targetEntry 4 }

targetDetailLevel OBJECT-TYPE   -- detail_level
	SYNTAX INTEGER 
		{
		concise (0),
		verbose (1),
		extended (2)
		}
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
	"Permits setting the detail level of the logged information. For SMNP v1 the setting EXTENDED changes the trap OID to indicate the private trap OID. For Syslog the setting EXTENDED prepends a rfc3164 compliant header. "
	::= { targetEntry 5 }

targetMessageFormat OBJECT-TYPE   -- message_format
	SYNTAX INTEGER 
		{
		standard (0),
		preferCustom (1),
		customOnly (2)
		}
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
	"Determines if custom message text is used. It may be desireable to use custom on the console but to use standard text in log files."
	::= { targetEntry 6 }

targetTrapType OBJECT-TYPE   -- trap_type
	SYNTAX INTEGER 
		{
		public (0),
		preferPublic (1),
		private (2),
		both (3)
		}
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
	"Decides whether public or private traps are used. This parameter only applies then a SNMP log_type is selected."
	::= { targetEntry 7 }

targetTrapCommunity OBJECT-TYPE   -- trap_community
	SYNTAX DisplayString
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
	"For SNMP v1/v2c parameter may be used to help receiving manager filtering out unwanted traps."
	::= { targetEntry 8 }

targetSnmpV3Username OBJECT-TYPE   -- snmp_v3_username
	SYNTAX DisplayString
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
	"When SNMP v3 is used this name is associated with a user under Mangement.access.user.name of the same name. The SNMP security level and passwords are taken from this user.For non SNMP logs this parameter has no effect."
	::= { targetEntry 9 }

targetMinimumSeverity OBJECT-TYPE   -- minimum_severity
	SYNTAX INTEGER 
		{
		disabled (0),
		debug (1),
		info (2),
		notice (3),
		warning (4),
		error (5),
		critical (6),
		alert (7),
		emergency (8)
		}
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
	"Only events with the defined severeness or worse are forwarded."
	::= { targetEntry 10 }

targetRequiredRelevance OBJECT-TYPE   -- required_relevance
	SYNTAX INTEGER 
		{
		any (0),
		negOnly (1)
		}
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
	"Forward any event or only negative ones."
	::= { targetEntry 11 }

targetRequiredSource OBJECT-TYPE   -- required_source
	SYNTAX INTEGER 
		{
		any (0),
		portOnly (1),
		unitOnly (2)
		}
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
	"Forward any event or only port or unit related events."
	::= { targetEntry 12 }

targetLogConfigChanges OBJECT-TYPE   -- log_config_changes
	SYNTAX INTEGER {  disabled(0), enabled(1) }
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
	"When enabled configuration changes are logged regardless of relevance or source. When disabled no config changes are logged."
	::= { targetEntry 13 }

targetLogDebugEventsOnly OBJECT-TYPE   -- log_debug_events_only
	SYNTAX INTEGER {  disabled(0), enabled(1) }
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
	"When enabled debugging events with a minimum severity are logged. Other events are suppressed! When disabled no debugging events are logged."
	::= { targetEntry 14 }


-- ********************* End of targetTable ***********************


-- ******************* Begin of historyConfigTable *************************

historyConfigTable	OBJECT-TYPE
	SYNTAX SEQUENCE OF HistoryConfigEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
		"Up to 15 distinct values may be polled and and saved to create a value history."
	::= { logging 4 }

historyConfigEntry	OBJECT-TYPE
	SYNTAX HistoryConfigEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
		""
	INDEX { historyConfigIndex }
	::= { historyConfigTable 1 }


	HistoryConfigEntry ::= SEQUENCE {
	historyConfigIndex INTEGER,
	historyConfigName DisplayString,
	historyConfigRecordMode INTEGER ,
	historyConfigHistoryFileMode INTEGER ,
	historyConfigDotstring DisplayString,
	historyConfigRestart DisplayString
	}

historyConfigIndex	OBJECT-TYPE
	SYNTAX INTEGER (0..14)
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
		"Automatically generated"
	::= { historyConfigEntry 1 }

historyConfigName OBJECT-TYPE   -- name
	SYNTAX DisplayString
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
	"Name of this chart"
	::= { historyConfigEntry 2 }

historyConfigRecordMode OBJECT-TYPE   -- record_mode
	SYNTAX INTEGER 
		{
		disabled (0),
		enabled (1)
		}
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
	"Defines in which way the history data are recorded."
	::= { historyConfigEntry 3 }

historyConfigHistoryFileMode OBJECT-TYPE   -- history_file_mode
	SYNTAX INTEGER 
		{
		disabled (0),
		hourly (1),
		daily (2)
		}
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
	"When set, the recorded data points will be saved to flash memory. The files can be accessed in the ftp history folder or using commands under Management.files.history."
	::= { historyConfigEntry 4 }

historyConfigDotstring OBJECT-TYPE   -- dotstring
	SYNTAX DisplayString
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
	"CLI compliant dotstring (command line) that will be executed in order to obtain the data to record."
	::= { historyConfigEntry 5 }

historyConfigRestart OBJECT-TYPE   -- restart
	SYNTAX DisplayString
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
	"Clear all historic data (in RAM)  and start from now on again. Only this seleted dotstring is affected. History files are NOT affected."
	::= { historyConfigEntry 6 }


-- ********************* End of historyConfigTable ***********************



-- ****************************** STATUS SECTION ********************************


-- ******************* Begin of statisticsTable *************************

statisticsTable	OBJECT-TYPE
	SYNTAX SEQUENCE OF StatisticsEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
		"These statistics indicate about the operation of the logging process."
	::= { logging 100 }

statisticsEntry	OBJECT-TYPE
	SYNTAX StatisticsEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
		""
	INDEX { statisticsIndex }
	::= { statisticsTable 1 }


	StatisticsEntry ::= SEQUENCE {
	statisticsIndex INTEGER,
	statisticsNumberOfTargets Unsigned32,
	statisticsLogfileCounter Unsigned32,
	statisticsSyslogCounter Unsigned32,
	statisticsSyslogErrorCounter Unsigned32,
	statisticsLastSyslogResponse DisplayString,
	statisticsTrapCounter Unsigned32,
	statisticsTrapErrorCounter Unsigned32,
	statisticsActiveLogfileIndex Unsigned32,
	statisticsLogfile1Size Unsigned32,
	statisticsLogfile2Size Unsigned32
	}

statisticsIndex	OBJECT-TYPE
	SYNTAX INTEGER (0)
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
		"Automatically generated"
	::= { statisticsEntry 1 }

statisticsNumberOfTargets OBJECT-TYPE   -- number_of_targets
	SYNTAX Unsigned32
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"Indicates who many recipients exist for an event. This includes local log file when selected."
	::= { statisticsEntry 2 }

statisticsLogfileCounter OBJECT-TYPE   -- logfile_counter
	SYNTAX Unsigned32
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"All logs written in the internal logfile system are counted here."
	::= { statisticsEntry 3 }

statisticsSyslogCounter OBJECT-TYPE   -- syslog_counter
	SYNTAX Unsigned32
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"All logs to any target are counted here."
	::= { statisticsEntry 4 }

statisticsSyslogErrorCounter OBJECT-TYPE   -- syslog_error_counter
	SYNTAX Unsigned32
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"All logs to any target that failed are counted here."
	::= { statisticsEntry 5 }

statisticsLastSyslogResponse OBJECT-TYPE   -- last_syslog_response
	SYNTAX DisplayString
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"This contains a copy of the last syslog response for trouble shooting."
	::= { statisticsEntry 6 }

statisticsTrapCounter OBJECT-TYPE   -- trap_counter
	SYNTAX Unsigned32
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"All traps to any target are counted here."
	::= { statisticsEntry 7 }

statisticsTrapErrorCounter OBJECT-TYPE   -- trap_error_counter
	SYNTAX Unsigned32
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"All traps to any target that failed are counted here."
	::= { statisticsEntry 8 }

statisticsActiveLogfileIndex OBJECT-TYPE   -- active_logfile_index
	SYNTAX Unsigned32
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"Indicates which of the alternating logfiles is currently selected and contains the recent logs."
	::= { statisticsEntry 9 }

statisticsLogfile1Size OBJECT-TYPE   -- logfile_1_size
	SYNTAX Unsigned32
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"Indicates the size of the internal local log file 1 in bytes."
	::= { statisticsEntry 10 }

statisticsLogfile2Size OBJECT-TYPE   -- logfile_2_size
	SYNTAX Unsigned32
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"Indicates the size of the internal local log file 2 in bytes."
	::= { statisticsEntry 11 }


-- ********************* End of statisticsTable ***********************


-- ******************* Begin of recentLogsTable *************************

recentLogsTable	OBJECT-TYPE
	SYNTAX SEQUENCE OF RecentLogsEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
		"This table displays the last 15 log events ordered from latest to oldest."
	::= { logging 101 }

recentLogsEntry	OBJECT-TYPE
	SYNTAX RecentLogsEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
		""
	INDEX { recentLogsIndex }
	::= { recentLogsTable 1 }


	RecentLogsEntry ::= SEQUENCE {
	recentLogsIndex INTEGER,
	recentLogsTimeStamp Counter32,
	recentLogsSeverity INTEGER ,
	recentLogsSource DisplayString,
	recentLogsMessage DisplayString
	}

recentLogsIndex	OBJECT-TYPE
	SYNTAX INTEGER (0..19)
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
		"Automatically generated"
	::= { recentLogsEntry 1 }

recentLogsTimeStamp OBJECT-TYPE   -- time_stamp
	SYNTAX Counter32
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"Updated whenever the entry is updated."
	::= { recentLogsEntry 2 }

recentLogsSeverity OBJECT-TYPE   -- severity
	SYNTAX INTEGER 
		{
		disabled (0),
		debug (1),
		info (2),
		notice (3),
		warning (4),
		error (5),
		critical (6),
		alert (7),
		emergency (8)
		}
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"Indicates the severeness of the event."
	::= { recentLogsEntry 3 }

recentLogsSource OBJECT-TYPE   -- source
	SYNTAX DisplayString
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"Indicates unit or port id of originating event source."
	::= { recentLogsEntry 4 }

recentLogsMessage OBJECT-TYPE   -- message
	SYNTAX DisplayString
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"This contains a copy of the last syslog message"
	::= { recentLogsEntry 5 }


-- ********************* End of recentLogsTable ***********************


-- ******************* Begin of historyRecordsTable *************************

historyRecordsTable	OBJECT-TYPE
	SYNTAX SEQUENCE OF HistoryRecordsEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
		"Displays historic values accumulated over time. These data may be used to plot graphs or to detect trends."
	::= { logging 102 }

historyRecordsEntry	OBJECT-TYPE
	SYNTAX HistoryRecordsEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
		""
	INDEX { historyRecordsIndex }
	::= { historyRecordsTable 1 }


	HistoryRecordsEntry ::= SEQUENCE {
	historyRecordsIndex INTEGER,
	historyRecordsName DisplayString,
	historyRecordsState INTEGER ,
	historyRecordsLastValue DisplayString,
	historyRecordsAverageLastMinute DisplayString,
	historyRecordsAverageLastHour DisplayString,
	historyRecordsLastMinute DisplayString,
	historyRecordsLastHour DisplayString,
	historyRecordsLastDay DisplayString,
	historyRecordsLastUpdate Counter32
	}

historyRecordsIndex	OBJECT-TYPE
	SYNTAX INTEGER (0..14)
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
		"Automatically generated"
	::= { historyRecordsEntry 1 }

historyRecordsName OBJECT-TYPE   -- name
	SYNTAX DisplayString
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"Reflects the name of the related history_config entry."
	::= { historyRecordsEntry 2 }

historyRecordsState OBJECT-TYPE   -- state
	SYNTAX INTEGER 
		{
		disabled (0),
		invalid (1),
		normal (2),
		updating (3)
		}
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"Indicates if this record displays a currently running script or a history entry of a previously running script which has ended by now."
	::= { historyRecordsEntry 3 }

historyRecordsLastValue OBJECT-TYPE   -- last_value
	SYNTAX DisplayString
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"This value is updated every second with the latest polled value."
	::= { historyRecordsEntry 4 }

historyRecordsAverageLastMinute OBJECT-TYPE   -- average_last_minute
	SYNTAX DisplayString
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"This value is updated every second but averages over the last minute."
	::= { historyRecordsEntry 5 }

historyRecordsAverageLastHour OBJECT-TYPE   -- average_last_hour
	SYNTAX DisplayString
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"This value is updated every minute but averages over the last hour."
	::= { historyRecordsEntry 6 }

historyRecordsLastMinute OBJECT-TYPE   -- last_minute
	SYNTAX DisplayString
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"Comma separated list with one value per every second starting at second 00. 60 values are recorded. Successive commas with no content in between indicate time positions for which no data are available."
	::= { historyRecordsEntry 7 }

historyRecordsLastHour OBJECT-TYPE   -- last_hour
	SYNTAX DisplayString
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"Comma separated list with one value per minute, starting at minute 00. 60 values are recorded. Successive commas with no content in between indicate time positions for which no data are yet available. Every hour the daily file gets one line appended. Every day a new file is created."
	::= { historyRecordsEntry 8 }

historyRecordsLastDay OBJECT-TYPE   -- last_day
	SYNTAX DisplayString
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"Comma separated list with one value per every 15 minutes, starting at hour 00. 96 values are recorded. Successive commas with no content in between indicate time positions for which no data are yet available. Every day at nidnight the file gets one line appended with the current day. Every month a new file is started."
	::= { historyRecordsEntry 9 }

historyRecordsLastUpdate OBJECT-TYPE   -- last_update
	SYNTAX Counter32
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"Indicates the time when this record was last updated."
	::= { historyRecordsEntry 10 }


-- ********************* End of historyRecordsTable ***********************



END