-- **SDOC*********************************************************************** -- ***************************************************************************** -- -- Copyright(c) 2003 Mediatrix Telecom, Inc. -- Copyright(c) 2007 Media5 Corporation. ("Media5") -- -- NOTICE: -- This document contains information that is confidential and proprietary -- to Media5. -- -- Media5 reserves all rights to this document as well as to the Intellectual -- Property of the document and the technology and know-how that it includes -- and represents. -- -- This publication cannot be reproduced, neither in whole nor in part, in -- any form whatsoever without written prior approval by Media5. -- -- Media5 reserves the right to revise this publication and make changes at -- any time and without the obligation to notify any person and/or entity of -- such revisions and/or changes. -- -- ***************************************************************************** -- **EDOC*********************************************************************** MX-MESSAGE-WAITING-INDICATOR-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Unsigned32 FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF ifIndex FROM RFC1213-MIB MxEnableState, MxDigitMap, MxSignalingAddress FROM MX-TC mediatrixConfig FROM MX-SMI; messageWaitingIndicatorMIB MODULE-IDENTITY LAST-UPDATED "201008040000Z" ORGANIZATION "Mediatrix Telecom" CONTACT-INFO "Mediatrix Telecom 4229, Garlock Street Sherbrooke (Quebec) Canada Phone: (819) 829-8749 " DESCRIPTION "This MIB is used to configure the message waiting indicator service." -- ************************************************************************ -- Revision history -- ************************************************************************ REVISION "201008040000Z" DESCRIPTION "Added mwiConfigVoltageEnable variable." REVISION "0308290000Z" DESCRIPTION "August 29, 2003 Updated mwiExpirationTime range March 11, 2003 Creation." ::= { mediatrixConfig 100 } mwiMIBObjects OBJECT IDENTIFIER ::= { messageWaitingIndicatorMIB 1 } mwiConformance OBJECT IDENTIFIER ::= { messageWaitingIndicatorMIB 10 } -- ************************************************************************ -- MWI Unit-wide config parameters -- ************************************************************************ mwiFetchDigitMap OBJECT-TYPE SYNTAX MxDigitMap MAX-ACCESS read-write STATUS current DESCRIPTION "Digit map that the user will dial to trigger a message fetch operation. Typically this will initiate a call to the voice-messaging system. See mwiConfigFetchAddress." DEFVAL { "" } ::= { mwiMIBObjects 10 } mwiExpirationTime OBJECT-TYPE SYNTAX Unsigned32 (180..604800) MAX-ACCESS read-write STATUS current DESCRIPTION "For signaling protocols that allow dynamic subscription to a messaging service, this value indicates the duration of such a subscription. This value is expressed in seconds (s)." DEFVAL { 3600 } ::= { mwiMIBObjects 20 } mwiSubscriptionCmdRefresh OBJECT-TYPE SYNTAX INTEGER { noOp(0), refresh(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Command to refresh the subscriptions. noOp : No operation. refresh : Refresh message waiting subscriptions. All enabled endpoints unsubscribe themselves from the service and re-subscribe using the current provisioning." DEFVAL { noOp } ::= { mwiMIBObjects 30 } -- ************************************************************************ -- MWI Config table -- ************************************************************************ mwiIfConfigurationTable OBJECT-TYPE SYNTAX SEQUENCE OF MwiIfConfigurationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of the configurable items relative to the message waiting indicator, indexed by the interface number." ::= { mwiMIBObjects 40 } mwiIfConfigurationEntry OBJECT-TYPE SYNTAX MwiIfConfigurationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the mwiIfConfigurationTable table. It contains the configuration of the mwi service for this interface." INDEX { ifIndex } ::= { mwiIfConfigurationTable 1 } MwiIfConfigurationEntry ::= SEQUENCE { mwiConfigActivation MxEnableState, mwiConfigUserSubscriptionAddress MxSignalingAddress, mwiConfigFetchAddress MxSignalingAddress } mwiConfigActivation OBJECT-TYPE SYNTAX MxEnableState MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable the message waiting service. This service, used in conjunction with a voice-messaging system, will enable the user to be notified when new messages are awaiting attention on the messaging server. The user will be alerted by the blinking of the LED on the phone, and a different dial tone when picking up the handset (called the message waiting tone). This variable's semantics are different depending on protocol and/or hardware platforms. Please refer to the documentation for more details." DEFVAL { disable } ::= { mwiIfConfigurationEntry 5 } mwiConfigUserSubscriptionAddress OBJECT-TYPE SYNTAX MxSignalingAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Typically, the unit will need to subscribe to a notification mechanism that will notify it when new messages are available. This field contains the address of that entity. This variable's semantics are different depending on protocol and/or hardware platforms. Please refer to the documentation for more details." DEFVAL { "" } ::= { mwiIfConfigurationEntry 10 } mwiConfigFetchAddress OBJECT-TYPE SYNTAX MxSignalingAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The fetch operation typically consists in the user initiating a call to the voice-messaging system, then using an auto-attendant to get the messages. This field contains the destination to use in creating the call when the mwiFetchDigitMap is matched. This variable's semantics are different depending on protocol and/or hardware platforms. Please refer to the documentation for more details. Also see mwiFetchDigitMap." DEFVAL { "" } ::= { mwiIfConfigurationEntry 15 } mwiConfigVoltageEnable OBJECT-TYPE SYNTAX MxEnableState MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable the voltage message waiting indicator. When new messages are awaiting attention on the messaging server, the unit uses the line voltage to power the LED on the telephone in addition to the default method. This variable is effective only if the endpoint is configured to use the visual message waiting indicator (mwiConfigActivation). This variable's semantics are different depending on protocol and/or hardware platforms. Please refer to the documentation for more details." DEFVAL { disable } ::= { mwiIfConfigurationEntry 20 } -- ************************************************************************ -- Conformance information -- ************************************************************************ mwiCompliances OBJECT IDENTIFIER ::= { mwiConformance 1 } mwiComplVer1 MODULE-COMPLIANCE STATUS current DESCRIPTION "List of groups required to support the message waiting indicator service." MODULE -- This Module MANDATORY-GROUPS { mwiIfConfigVer1, mwiConfigVer1 } ::= { mwiCompliances 1 } -- ************************************************************************ -- MIB variable grouping -- ************************************************************************ mwiGroups OBJECT IDENTIFIER ::= { mwiConformance 5 } mwiIfConfigVer1 OBJECT-GROUP OBJECTS { mwiConfigActivation, mwiConfigUserSubscriptionAddress, mwiConfigFetchAddress } STATUS current DESCRIPTION "A collection of objects that defines the characteristics of the mwi service per port." ::= { mwiGroups 3 } mwiConfigVer1 OBJECT-GROUP OBJECTS { mwiFetchDigitMap, mwiExpirationTime } STATUS current DESCRIPTION "A collection of objects that defines the characteristics of the mwi service for the unit." ::= { mwiGroups 6 } END