-- **************************************************************************** -- **************************************************************************** -- Copyright(c) 2004 Mediatrix Telecom, Inc. -- NOTICE: -- This document contains information that is confidential and proprietary -- to Mediatrix Telecom, Inc. -- Mediatrix Telecom, Inc. reserves all rights to this document as well as -- to the Intellectual Property of the document and the technology and -- know-how that it includes and represents. -- This publication cannot be reproduced, neither in whole nor in part in -- any form whatsoever without written prior approval by -- Mediatrix Telecom, Inc. -- Mediatrix Telecom, Inc. reserves the right to revise this publication -- and make changes at any time and without the obligation to notify any -- person and/or entity of such revisions and/or changes. -- **************************************************************************** -- **************************************************************************** MX-HOC-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, Integer32 FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF MxEnableState, MxActivationState, MxIpHostName, MxIpAddress, MxIpPort, MxAdvancedIpPort, MxIpSubnetMask, MxDigitMap FROM MX-TC MxUInt64, MxFloat32, MxIpHostNamePort, MxIpAddr, MxIpAddrPort, MxIpAddrMask, MxUri, MxUrl FROM MX-TC2 mediatrixServices FROM MX-SMI2; hocMIB MODULE-IDENTITY LAST-UPDATED "1910210000Z" ORGANIZATION " Mediatrix Telecom, Inc. " CONTACT-INFO " Mediatrix Telecom, Inc. 4229, Garlock Street Sherbrooke (Quebec) Canada Phone: (819) 829-8749 " DESCRIPTION " Host Configuration The Host Configuration (Hoc) service manages the IP host parameters and other system settings. " ::= { mediatrixServices 700 } hocMIBObjects OBJECT IDENTIFIER ::= { hocMIB 1 } -- Scalar:Management Interface managementInterface OBJECT-TYPE SYNTAX OCTET STRING ( SIZE(1..50) ) MAX-ACCESS read-write STATUS current DESCRIPTION " Management Interface Specifies to which network interface the system management services are bound. The name specified here must match an existing InterfaceName in the NetworkInterfacesStatus table of the Bni service. The special value 'All' means to bind all network interfaces. Note that this parameter is case-sensitive. Note that Advance IP Routing could be required to forward the packet over the correct network. " DEFVAL { "Lan1" } ::= { hocMIBObjects 100 } -- Scalar:Automatic Configuration Interface automaticConfigurationInterface OBJECT-TYPE SYNTAX OCTET STRING ( SIZE(0..50) ) MAX-ACCESS read-write STATUS current DESCRIPTION " Automatic Configuration Interface The network interface that provides the IPv4 automatic configuration (Default Router, domain name, DNS servers, and NTP server) used by the unit. Please note that some connection types (for example ipStatic and pppIpcp) cannot obtain information about the domain name, DNS servers, and NTP server from the network, and therefore lead to no domain name being applied to the system. " DEFVAL { "" } ::= { hocMIBObjects 150 } -- Scalar:IPv6 Automatic Configuration Interface ipv6AutomaticConfigurationInterface OBJECT-TYPE SYNTAX OCTET STRING ( SIZE(0..50) ) MAX-ACCESS read-write STATUS current DESCRIPTION " IPv6 Automatic Configuration Interface The network interface that provides the IPv6 automatic configuration (Default Router, domain name, DNS servers, and NTP server) used by the unit. Please note that some connection types (for example ip6Static) cannot obtain information about the domain name, DNS servers, and NTP server from the network, and therefore lead to no domain name being applied to the system. " DEFVAL { "" } ::= { hocMIBObjects 175 } -- Scalar:Host Name hostName OBJECT-TYPE SYNTAX MxIpHostName MAX-ACCESS read-write STATUS current DESCRIPTION " Host Name Host name of the unit. Certain restrictions apply to this name: * It must be shorter than 64 characters. * It must not start with a space or a period. * It must not contain double quotes, semicolons, curly braces and commas. " DEFVAL { "" } ::= { hocMIBObjects 200 } -- **************************************************************************** -- Group:Time -- **************************************************************************** timeGroup OBJECT IDENTIFIER ::= { hocMIBObjects 250 } -- Scalar:SystemTime systemTime OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION " SystemTime Current system date and time configured in the unit. This local time is computed from the Time Zone defined in the StaticTimeZone parameter. If the time seems not valid, verify the SNTP configuration in the Sntp group. " ::= { timeGroup 100 } -- Scalar:System Uptime systemUptime OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION " System Uptime Time elapsed since the last system restart in a D:HH:MM:SS format. " ::= { timeGroup 150 } -- Scalar:Static Time Zone staticTimeZone OBJECT-TYPE SYNTAX OCTET STRING ( SIZE(0..255) ) MAX-ACCESS read-write STATUS current DESCRIPTION " Static Time Zone Specifies the time zone in which the system is located. This string MUST use the IEEE 1003.1 POSIX format as defined in bootp-dhcp-option-88.txt. The following are some example strings. * Pacific Time (Canada and US) : PST8PDT7,M3.2.0/ 02:00:00,M11.1.0/02:00:00 * Mountain Time (Canada and US) : MST7MDT6,M3.2.0/ 02:00:00,M11.1.0/02:00:00 * Central Time (Canada and US) : CST6CDT5,M3.2.0/ 02:00:00,M11.1.0/02:00:00 * Eastern Time (Canada and US) : EST5EDT4,M3.2.0/ 02:00:00,M11.1.0/02:00:00 * Atlantic Time (Canada) : AST4ADT3,M3.2.0/02:00:00,M11.1.0/ 02:00:00 * GMT Standard Time : GMT0DMT-1,M3.5.0/01:00:00,M10.5.0/ 02:00:00 * W. Europe Standard Time : WEST-1DWEST-2,M3.5.0/ 02:00:00,M10.5.0/03:00:00 * China Standard Time : CST-8 * Tokyo Standard Time : TST-9 * Central Australia Standard Time : CAUST-9:30DCAUST-10:30,M10.5.0/02:00:00,M3.5.0/02:00:00 * Australia Eastern Standard Time : AUSEST-10AUSDST-11,M10.5.0/02:00:00,M3.5.0/02:00:00 * UTC (Coordinated Universal Time) : UTC0 " DEFVAL { "EST5EDT4,M3.2.0/02:00:00,M11.1.0/02:00:00" } ::= { timeGroup 200 } -- End of group:Time -- **************************************************************************** -- Group:Domain Name -- **************************************************************************** domainNameGroup OBJECT IDENTIFIER ::= { hocMIBObjects 300 } -- Scalar:Configuration Source domainNameConfigSource OBJECT-TYPE SYNTAX INTEGER { automatic(100) , automaticIpv6(150) , static(200) } MAX-ACCESS read-write STATUS current DESCRIPTION " Configuration Source Configuration source for the domain name. * Automatic: The domain name is automatically obtained from the IPv4 network defined in the AutomaticConfigurationInterface parameter. * AutomaticIpv6: The domain name is automatically obtained from the IPv6 network defined in the Ipv6AutomaticConfigurationInterface parameter. * Static: The domain name is specified in the StaticDomainName parameter. When switching from a Static to an Automatic or AutomaticIpv6 configuration source, the last value correctly obtained from the network (if any) is applied to the system. " DEFVAL { automatic } ::= { domainNameGroup 100 } -- Scalar:Domain Name domainNameInfo OBJECT-TYPE SYNTAX MxIpHostName MAX-ACCESS read-only STATUS current DESCRIPTION " Domain Name Current domain name. " ::= { domainNameGroup 200 } -- Scalar:Static Domain Name staticDomainName OBJECT-TYPE SYNTAX MxIpHostName MAX-ACCESS read-write STATUS current DESCRIPTION " Static Domain Name Static domain name. This domain name is used as the current domain name when the DomainNameConfigSource parameter is set to 'Static'. " DEFVAL { "" } ::= { domainNameGroup 300 } -- End of group:Domain Name -- **************************************************************************** -- Group:SNTP -- **************************************************************************** sntpGroup OBJECT IDENTIFIER ::= { hocMIBObjects 400 } -- Scalar:Configuration Source sntpConfigSource OBJECT-TYPE SYNTAX INTEGER { automatic(100) , automaticIpv6(150) , static(200) , automaticWithFallback(300) } MAX-ACCESS read-write STATUS current DESCRIPTION " Configuration Source Configuration source for the SNTP parameters. * Automatic: The SNTP parameters are automatically obtained from the IPv4 network defined in the AutomaticConfigurationInterface parameter. * AutomaticIpv6: The SNTP parameters are automatically obtained from the IPv6 network defined in the Ipv6AutomaticConfigurationInterface parameter. * Static: The SNTP parameters are specified in the StaticSntpServers table. * AutomaticWithFallback: The SNTP parameters are automatically obtained from the IPv4 network with a fallback to the StaticSntpServers table. When switching from a Static to an Automatic or AutomaticIpv6 configuration source, the last values correctly obtained from the network (if any) are applied to the system. " DEFVAL { automatic } ::= { sntpGroup 100 } -- Scalar:Synchronisation Period sntpSynchronizationPeriod OBJECT-TYPE SYNTAX Unsigned32 ( 1..1440 ) MAX-ACCESS read-write STATUS current DESCRIPTION " Synchronisation Period Time interval between system time synchronisation cycles. Each time this interval expires, a SNTP request is sent to the SNTP server and the result is used to set the system time. This value is expressed in minutes. The maximum value is set to 1 440 minutes, which corresponds to 24 hours. " DEFVAL { 1440 } ::= { sntpGroup 200 } -- Scalar:Synchronisation Period On Error sntpSynchronizationPeriodOnError OBJECT-TYPE SYNTAX Unsigned32 ( 1..1440 ) MAX-ACCESS read-write STATUS current DESCRIPTION " Synchronisation Period On Error Time interval between retries after an unsuccessful request to the SNTP server. This value is expressed in minutes. The maximum value is set to 1 440 minutes, which corresponds to 24 hours. " DEFVAL { 60 } ::= { sntpGroup 300 } -- Scalar:Time Zone sntpTimeZone OBJECT-TYPE SYNTAX OCTET STRING ( SIZE(0..255) ) MAX-ACCESS read-write STATUS obsolete DESCRIPTION " Time Zone This parameter is obsolete and has been replaced by TimeGroup.StaticTimeZone parameter. " DEFVAL { "EST5EDT4,M3.2.0/02:00:00,M11.1.0/02:00:00" } ::= { sntpGroup 400 } -- Scalar:Server Host sntpServerHostInfo OBJECT-TYPE SYNTAX MxIpHostNamePort MAX-ACCESS read-only STATUS obsolete DESCRIPTION " Server Host This parameter is obsolete and has been replaced by Hoc.SntpServersInfo.HostName parameter. " ::= { sntpGroup 500 } -- Scalar:Static Server Host staticSntpServerHost OBJECT-TYPE SYNTAX MxIpHostNamePort MAX-ACCESS read-write STATUS obsolete DESCRIPTION " Static Server Host This parameter is obsolete and has been replaced by the Hoc.StaticSntpServers.HostName parameter. " DEFVAL { "192.168.10.10:123" } ::= { sntpGroup 700 } -- Scalar:Current Source sntpCurrentSource OBJECT-TYPE SYNTAX MxIpHostNamePort MAX-ACCESS read-only STATUS current DESCRIPTION " Current Source The IP address and port of the last NTP server used to synchronise the system time. An empty value indicates that no servers have been successfully contacted since the last service restart. " ::= { sntpGroup 750 } -- *************************************************************************** -- Table:SNTP Servers -- *************************************************************************** sntpServersInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF SntpServersInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " SNTP Servers This table contains the list of current SNTP servers. The SNTP servers are sorted by priority. The list can contain static servers, dynamic servers (DHCP) or both depending on how the SntpConfigSource parameter is set. When a server does not respond, there is a delay of several seconds before attempting to use the next one. " ::= { sntpGroup 800 } sntpServersInfoEntry OBJECT-TYPE SYNTAX SntpServersInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " A row in table SNTP Servers. " INDEX { sntpServersInfoPriority } ::= { sntpServersInfoTable 1 } SntpServersInfoEntry ::= SEQUENCE { sntpServersInfoPriority Unsigned32, sntpServersInfoHostName MxIpHostNamePort } -- Index:Priority sntpServersInfoPriority OBJECT-TYPE SYNTAX Unsigned32 ( 1..8 ) MAX-ACCESS read-only STATUS current DESCRIPTION " Priority Priority number for this SNTP server. The lower the number is, the higher the priority is. " ::= { sntpServersInfoEntry 100 } -- Columnar:Server Host sntpServersInfoHostName OBJECT-TYPE SYNTAX MxIpHostNamePort MAX-ACCESS read-only STATUS current DESCRIPTION " Server Host SNTP server host name and port. " DEFVAL { "" } ::= { sntpServersInfoEntry 200 } -- End of table:SNTP Servers -- *************************************************************************** -- Table:Static SNTP Servers -- *************************************************************************** staticSntpServersTable OBJECT-TYPE SYNTAX SEQUENCE OF StaticSntpServersEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Static SNTP Servers This table contains the list of static SNTP servers. The SNTP servers are sorted by priority. These SNTP servers are used as the current SNTP servers when the SntpConfigSource parameter is set to 'Static'. " ::= { sntpGroup 900 } staticSntpServersEntry OBJECT-TYPE SYNTAX StaticSntpServersEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " A row in table Static SNTP Servers. " INDEX { staticSntpServersPriority } ::= { staticSntpServersTable 1 } StaticSntpServersEntry ::= SEQUENCE { staticSntpServersPriority Unsigned32, staticSntpServersHostName MxIpHostNamePort } -- Index:Priority staticSntpServersPriority OBJECT-TYPE SYNTAX Unsigned32 ( 1..4 ) MAX-ACCESS read-only STATUS current DESCRIPTION " Priority Priority number of this static SNTP server. The lower the number is, the higher the priority is. " ::= { staticSntpServersEntry 100 } -- Columnar:Server Host staticSntpServersHostName OBJECT-TYPE SYNTAX MxIpHostNamePort MAX-ACCESS read-write STATUS current DESCRIPTION " Server Host SNTP server host name and port. " DEFVAL { "" } ::= { staticSntpServersEntry 200 } -- End of table:Static SNTP Servers -- End of group:SNTP -- **************************************************************************** -- Group:Default Router -- **************************************************************************** defaultRouterGroup OBJECT IDENTIFIER ::= { hocMIBObjects 500 } -- Scalar:Configuration Source defaultRouterConfigSource OBJECT-TYPE SYNTAX INTEGER { automatic(100) , static(200) } MAX-ACCESS read-write STATUS current DESCRIPTION " Configuration Source Configuration source for the default router. * Automatic: The default IPv4 router is automatically obtained from the IPv4 network defined in the AutomaticConfigurationInterface. * Static: The default router is specified in the StaticDefaultRouter parameter. When switching from a Static to an Automatic configuration source, the last value correctly obtained from the network (if any) is applied to the system. " DEFVAL { automatic } ::= { defaultRouterGroup 100 } -- Scalar:Default IPv6 Router Configuration Source defaultIpv6RouterConfigSource OBJECT-TYPE SYNTAX INTEGER { automaticIpv6(150) , static(200) } MAX-ACCESS read-write STATUS current DESCRIPTION " Default IPv6 Router Configuration Source Configuration source for the default IPv6 router. * AutomaticIpv6: The default IPv6 router is automatically obtained from the IPv6 network defined in the Ipv6AutomaticConfigurationInterface parameter. * Static: The default router is specified in the StaticDefaultIpv6Router parameter. When switching from a Static to an AutomaticIpv6 configuration source, the last value correctly obtained from the network (if any) is applied to the system. " DEFVAL { automaticIpv6 } ::= { defaultRouterGroup 150 } -- Scalar:Default Router defaultRouterInfo OBJECT-TYPE SYNTAX MxIpAddr MAX-ACCESS read-only STATUS current DESCRIPTION " Default Router Current default router address. " ::= { defaultRouterGroup 200 } -- Scalar:Default IPv6 Router defaultIpv6RouterInfo OBJECT-TYPE SYNTAX MxIpAddress MAX-ACCESS read-only STATUS current DESCRIPTION " Default IPv6 Router Current default IPv6 router address. " ::= { defaultRouterGroup 250 } -- Scalar:Static Default Router staticDefaultRouter OBJECT-TYPE SYNTAX MxIpAddr MAX-ACCESS read-write STATUS current DESCRIPTION " Static Default Router Static default router address. This address is used as the current default router address when the DefaultRouterConfigSource parameter is set to 'Static'. " DEFVAL { "192.168.10.10" } ::= { defaultRouterGroup 300 } -- Scalar:Static Default IPv6 Router staticDefaultIpv6Router OBJECT-TYPE SYNTAX MxIpAddress MAX-ACCESS read-write STATUS current DESCRIPTION " Static Default IPv6 Router Static default IPv6 router address. This address is used as the current default router address when the DefaultIPv6RouterConfigSource parameter is set to 'Static'. " DEFVAL { "" } ::= { defaultRouterGroup 350 } -- End of group:Default Router -- **************************************************************************** -- Group:DNS Servers -- **************************************************************************** dnsServersGroup OBJECT IDENTIFIER ::= { hocMIBObjects 600 } -- Scalar:Configuration Source dnsServersConfigSource OBJECT-TYPE SYNTAX INTEGER { automatic(100) , automaticIpv6(150) , static(200) } MAX-ACCESS read-write STATUS current DESCRIPTION " Configuration Source Configuration source for the DNS servers. * Automatic: The DNS servers are automatically obtained from the IPv4 network defined in the AutomaticConfigurationInterface parameter. * AutomaticIpv6: The DNS servers are automatically obtained from the IPv6 network defined in the Ipv6AutomaticConfigurationInterface parameter. * Static: The DNS servers are specified in the StaticDnsServers table. When switching from a Static to an Automatic or AutomaticIpv6 configuration source, the last values correctly obtained from the network (if any) are applied to the system. " DEFVAL { automatic } ::= { dnsServersGroup 100 } -- Scalar:Dns Cache Randomisation dnsCacheRandomization OBJECT-TYPE SYNTAX MxEnableState MAX-ACCESS read-write STATUS current DESCRIPTION " Dns Cache Randomisation Configuration of the DNS records randomisation of the device's internal DNS Cache. * Enable: When DNS A/AAAA records are accessed from the cache, they are sent to the requesting service in a randomised order. * Disable: When DNS A/AAAA records are accessed from the cache, they are sent to the requesting service in the same order they were originally received from the network. " DEFVAL { disable } ::= { dnsServersGroup 150 } -- *************************************************************************** -- Table:DNS Servers -- *************************************************************************** dnsServersInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF DnsServersInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " DNS Servers This table contains the list of current DNS servers. The DNS servers are sorted by priority. " ::= { dnsServersGroup 200 } dnsServersInfoEntry OBJECT-TYPE SYNTAX DnsServersInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " A row in table DNS Servers. " INDEX { dnsServersInfoPriority } ::= { dnsServersInfoTable 1 } DnsServersInfoEntry ::= SEQUENCE { dnsServersInfoPriority Unsigned32, dnsServersInfoIpAddress MxIpAddress } -- Index:Priority dnsServersInfoPriority OBJECT-TYPE SYNTAX Unsigned32 ( 1..4 ) MAX-ACCESS read-only STATUS current DESCRIPTION " Priority Priority number for this DNS server. The lower the number is, the higher the priority is. " ::= { dnsServersInfoEntry 100 } -- Columnar:Server Address dnsServersInfoIpAddress OBJECT-TYPE SYNTAX MxIpAddress MAX-ACCESS read-only STATUS current DESCRIPTION " Server Address DNS server IP address. " ::= { dnsServersInfoEntry 200 } -- End of table:DNS Servers -- *************************************************************************** -- Table:Static DNS Servers -- *************************************************************************** staticDnsServersTable OBJECT-TYPE SYNTAX SEQUENCE OF StaticDnsServersEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Static DNS Servers This table contains the list of static DNS servers. The DNS servers are sorted by priority. These DNS servers are used as the current DNS servers when the DnsServersConfigSource parameter is set to 'Static'. " ::= { dnsServersGroup 300 } staticDnsServersEntry OBJECT-TYPE SYNTAX StaticDnsServersEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " A row in table Static DNS Servers. " INDEX { staticDnsServersPriority } ::= { staticDnsServersTable 1 } StaticDnsServersEntry ::= SEQUENCE { staticDnsServersPriority Unsigned32, staticDnsServersIpAddress MxIpAddress } -- Index:Priority staticDnsServersPriority OBJECT-TYPE SYNTAX Unsigned32 ( 1..4 ) MAX-ACCESS read-only STATUS current DESCRIPTION " Priority Priority number of this static DNS server. The lower the number is, the higher the priority is. " ::= { staticDnsServersEntry 100 } -- Columnar:IP Address staticDnsServersIpAddress OBJECT-TYPE SYNTAX MxIpAddress MAX-ACCESS read-write STATUS current DESCRIPTION " IP Address Static DNS server IP address. " ::= { staticDnsServersEntry 200 } -- End of table:Static DNS Servers -- End of group:DNS Servers -- **************************************************************************** -- Group:Hosts -- **************************************************************************** hostsGroup OBJECT IDENTIFIER ::= { hocMIBObjects 650 } -- *************************************************************************** -- Table:Static Hosts -- *************************************************************************** staticHostsTable OBJECT-TYPE SYNTAX SEQUENCE OF StaticHostsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Static Hosts This table contains a list of static hosts. Each host is configured with an FQDN and its static ip addresses. This table is used by the Hoc service to locally resolve an FQDN and obtain its ip address without performing a DNS request. " ::= { hostsGroup 100 } staticHostsEntry OBJECT-TYPE SYNTAX StaticHostsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " A row in table Static Hosts. " INDEX { staticHostsIndex } ::= { staticHostsTable 1 } StaticHostsEntry ::= SEQUENCE { staticHostsIndex Unsigned32, staticHostsName OCTET STRING, staticHostsIpAddresses OCTET STRING, staticHostsDelete INTEGER } -- Index:Index staticHostsIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " Index Unique identifier of the row in the table. " ::= { staticHostsEntry 100 } -- Row command:Delete staticHostsDelete OBJECT-TYPE SYNTAX INTEGER { noOp(0), delete(10) } MAX-ACCESS read-write STATUS current DESCRIPTION " Delete Deletes this row. " DEFVAL { noOp } ::= { staticHostsEntry 1000 } -- Columnar:Name staticHostsName OBJECT-TYPE SYNTAX OCTET STRING ( SIZE(0..253) ) MAX-ACCESS read-write STATUS current DESCRIPTION " Name Name (FQDN) of the static host. The Hoc service does not perform DNS queries to resolve this FQDN. It returns the static ip addresses defined in the StaticHosts.IpAddress parameter. This name must be unique across the table. " DEFVAL { "" } ::= { staticHostsEntry 200 } -- Columnar:IP Addresses staticHostsIpAddresses OBJECT-TYPE SYNTAX OCTET STRING ( SIZE(0..255) ) MAX-ACCESS read-write STATUS current DESCRIPTION " IP Addresses List of static IP addresses associated with the FQDN specified in the StaticHosts.Name parameter. This list contains numerical IPv4 or IPv6 addresses. IP addresses MUST be separated by a comma (,). " DEFVAL { "" } ::= { staticHostsEntry 300 } -- End of table:Static Hosts -- End of group:Hosts -- **************************************************************************** -- Group:System -- **************************************************************************** systemGroup OBJECT IDENTIFIER ::= { hocMIBObjects 800 } -- Scalar:System Contact systemContact OBJECT-TYPE SYNTAX OCTET STRING ( SIZE(0..255) ) MAX-ACCESS read-write STATUS current DESCRIPTION " System Contact Indicates the contact information for the device. This information is for display purposes only and does not affect the behavior of the device. The value of this parameter is also returned by the 'sysContact' object in SNMPv2-MIB. " DEFVAL { "" } ::= { systemGroup 100 } -- Scalar:System Name systemName OBJECT-TYPE SYNTAX OCTET STRING ( SIZE(0..255) ) MAX-ACCESS read-write STATUS current DESCRIPTION " System Name Indicates the name of the device. This information is for display purposes only and does not affect the behavior of the device. The value of this parameter is also returned by the 'sysName' object in SNMPv2-MIB. " DEFVAL { "" } ::= { systemGroup 200 } -- Scalar:System Location systemLocation OBJECT-TYPE SYNTAX OCTET STRING ( SIZE(0..255) ) MAX-ACCESS read-write STATUS current DESCRIPTION " System Location Indicates the physical location of the device. This information is for display purposes only and does not affect the behavior of the device. The value of this parameter is also returned by the 'sysLocation' object in SNMPv2-MIB. " DEFVAL { "" } ::= { systemGroup 300 } -- *************************************************************************** -- Group:Http Group -- *************************************************************************** httpClientGroup OBJECT IDENTIFIER ::= { systemGroup 1000 } -- Scalar:HTTP User-Agent Header Format httpUaHeaderFormat OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION " HTTP User-Agent Header Format The text to display in the HTTP User-Agent Header. Macros can be used to include information specific to the unit. The supported macros are: * %version% - Application version. * %mac% - MAC address. * %product% - Product name. * %profile% - Profile. * %serial% - Serial number. * %% - Insert % character. " DEFVAL { "%product%/v%version% %profile%" } ::= { httpClientGroup 100 } -- End of group:Http Group -- End of group:System -- **************************************************************************** -- Group:Notification Messages Configuration -- **************************************************************************** notificationsGroup OBJECT IDENTIFIER ::= { hocMIBObjects 60010 } -- Scalar:Minimal Severity of Notification minSeverity OBJECT-TYPE SYNTAX INTEGER { disable(0) , debug(100) , info(200) , warning(300) , error(400) , critical (500) } MAX-ACCESS read-write STATUS current DESCRIPTION " Minimal Severity of Notification Sets the minimal severity to issue a notification message incoming from this service. * Disable: No notification is issued. * Debug: All notification messages are issued. * Info: Notification messages with a 'Informational' and higher severity are issued. * Warning: Notification messages with a 'Warning' and higher severity are issued. * Error: Notification messages with an 'Error' and higher severity are issued. * Critical: Notification messages with a 'Critical' severity are issued. " DEFVAL { warning } ::= { notificationsGroup 100 } -- End of group:Notification Messages Configuration -- **************************************************************************** -- Group:Configuration Settings -- **************************************************************************** configurationGroup OBJECT IDENTIFIER ::= { hocMIBObjects 60020 } -- Scalar:Need Restart needRestartInfo OBJECT-TYPE SYNTAX INTEGER { no(0) , yes(100) } MAX-ACCESS read-only STATUS current DESCRIPTION " Need Restart Indicates if the service needs to be restarted for the configuration to fully take effect. * Yes: Service needs to be restarted. * No: Service does not need to be restarted. Services can be restarted by using the Scm.ServiceCommands.Restart command. " ::= { configurationGroup 100 } -- End of group:Configuration Settings END