-- **************************************************************************** -- **************************************************************************** -- -- Copyright(c) 2005 Mediatrix Telecom, Inc. -- -- NOTICE: -- This document contains information that is confidential and proprietary -- to Mediatrix Telecom, Inc. -- -- Mediatrix Telecom, Inc. reserves all rights to this document as well as -- to the Intellectual Property of the document and the technology and -- know-how that it includes and represents. -- -- This publication cannot be reproduced, neither in whole nor in part in -- any form whatsoever without written prior approval by -- Mediatrix Telecom, Inc. -- -- Mediatrix Telecom, Inc. reserves the right to revise this publication -- and make changes at any time and without the obligation to notify any -- person and/or entity of such revisions and/or changes. -- -- **************************************************************************** -- **************************************************************************** MX-DIGITAL-PRODUCTS-MIB DEFINITIONS ::= BEGIN IMPORTS mediatrix FROM MX-SMI MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Integer32, Counter32, Gauge32,Counter64, TimeTicks FROM SNMPv2-SMI TEXTUAL-CONVENTION, DisplayString, PhysAddress, TruthValue, RowStatus, TimeStamp, AutonomousType, TestAndIncr FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF snmpTraps FROM SNMPv2-MIB enterprises FROM RFC1155-SMI; mediatrixDigitalProducts MODULE-IDENTITY LAST-UPDATED "0208071000Z" ORGANIZATION "Mediatrix Telecom, Inc." CONTACT-INFO "Mediatrix Telecom, Inc. 4229, Garlock Street Sherbrooke (Quebec) Canada Phone: (819) 829-8749 Web: http://www.mediatrix.com" DESCRIPTION "This MIB describes the parameters of Mediatrix digital products." REVISION "0208071000Z" DESCRIPTION "Creation" ::= { mediatrix 3 } -- **************************************************************************** -- defining the objects -- **************************************************************************** sysinfo OBJECT IDENTIFIER ::= { mediatrixDigitalProducts 1 } admin OBJECT IDENTIFIER ::= { mediatrixDigitalProducts 2 } config OBJECT IDENTIFIER ::= { mediatrixDigitalProducts 3 } firmware OBJECT IDENTIFIER ::= { mediatrixDigitalProducts 4 } products OBJECT IDENTIFIER ::= { mediatrixDigitalProducts 5 } performance OBJECT IDENTIFIER ::= { mediatrixDigitalProducts 70 } startupConfigUpload OBJECT IDENTIFIER ::= { config 1 } startupConfigDownload OBJECT IDENTIFIER ::= { config 2 } -- **************************************************************************** -- defining the sysinfo objects -- **************************************************************************** serialNumber OBJECT-TYPE SYNTAX DisplayString (SIZE(0..12)) MAX-ACCESS read-only STATUS current DESCRIPTION "Provides the serial number of the device." ::= { sysinfo 1 } hwRelease OBJECT-TYPE SYNTAX DisplayString (SIZE(0..8)) MAX-ACCESS read-only STATUS current DESCRIPTION "Provides the hardware release of the device." ::= { sysinfo 3 } hwVersion OBJECT-TYPE SYNTAX DisplayString (SIZE(0..8)) MAX-ACCESS read-only STATUS current DESCRIPTION "Provides the hardware version of the device." ::= { sysinfo 4 } swVersion OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "Provides the software version of the device. The following is an example of a software version information: R2.20 BUILD21219" ::= { sysinfo 5 } productName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "Provides the product name of the device." ::= { sysinfo 6 } -- **************************************************************************** -- defining the startup config upload objects -- **************************************************************************** uploadExecute OBJECT-TYPE SYNTAX INTEGER { noOp (0), uploadConfiguration (1) } ACCESS read-write STATUS mandatory DESCRIPTION "Starts configuration upload via TFTP. 0 noOp 1 uploadConfiguration" ::= { startupConfigUpload 1 } uploadTftpServerAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..255)) ACCESS read-write STATUS mandatory DESCRIPTION "Tftp server IP address." ::= { startupConfigUpload 2 } uploadTftpServerPort OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Tftp server IP port number." DEFVAL { 69 } ::= { startupConfigUpload 3 } uploadTftpServerPath OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..255)) ACCESS read-write STATUS mandatory DESCRIPTION "Server path and file name on which the configuration will be stored. ( e.g. configurations/config1.cfg )" ::= { startupConfigUpload 4 } uploadStatus OBJECT-TYPE SYNTAX INTEGER { failed (0), success (1), inProgress (2) } ACCESS read-only STATUS mandatory DESCRIPTION "The status of the running configuration transfer from the device to a file on the TFTP server. 0 failed 1 success 2 inProgress" ::= { startupConfigUpload 5 } -- **************************************************************************** -- defining the startup config download objects -- **************************************************************************** downloadExecute OBJECT-TYPE SYNTAX INTEGER { noOp (0), downloadConfiguration (1) } ACCESS read-write STATUS mandatory DESCRIPTION "Starts configuration download via TFTP. A reload of the device will be necessary in order to apply the new downloaded configuration. 0 noOP 1 downloadConfiguration" ::= { startupConfigDownload 1 } downloadTftpServerAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..255)) ACCESS read-write STATUS mandatory DESCRIPTION "Tftp server IP address." ::= { startupConfigDownload 2 } downloadTftpServerPort OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-write STATUS current DESCRIPTION "Tftp server IP port number." DEFVAL { 69 } ::= { startupConfigDownload 3 } downloadTftpServerPath OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..255)) ACCESS read-write STATUS mandatory DESCRIPTION "Server path and file name from which the configuration will be downloaded ( e.g. configurations/config1.cfg )." ::= { startupConfigDownload 4 } downloadStatus OBJECT-TYPE SYNTAX INTEGER { failed (0), success (1), inProgress (2) } ACCESS read-only STATUS mandatory DESCRIPTION "The status of the configuration file transfer from the TFTP server to the device's startup configuration. 0 failed 1 success 2 inProgress" ::= { startupConfigDownload 5 } -- **************************************************************************** -- defining the firmware download objects -- **************************************************************************** firmwareLoadExecute OBJECT-TYPE SYNTAX INTEGER { noOp (0), loadFirmware (1) } ACCESS read-write STATUS mandatory DESCRIPTION "Starts firmware download via TFTP. 0 noOp 1 loadFirmware" ::= { firmware 1 } firmwareTftpServerAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..255)) ACCESS read-write STATUS mandatory DESCRIPTION "Tftp server IP address." ::= { firmware 2 } firmwareTftpServerPort OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-write STATUS current DESCRIPTION "Tftp server IP port number." DEFVAL { 69 } ::= { firmware 3 } firmwareTftpServerPath OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..255)) ACCESS read-write STATUS mandatory DESCRIPTION "Server path and file name of the firmware batch-file. ( e.g. firmware/b )" ::= { firmware 4 } firmwareLoadStatus OBJECT-TYPE SYNTAX INTEGER { failed (0), success (1), inProgress (2) } ACCESS read-only STATUS mandatory DESCRIPTION "The status of the firmware download from the TFTP server to the device. 0 failed 1 success 2 inProgress" ::= { firmware 5 } -- **************************************************************************** -- defining the admin objects -- **************************************************************************** deviceReload OBJECT-TYPE SYNTAX INTEGER { noOp (0), reload (1) } ACCESS read-write STATUS mandatory DESCRIPTION "Force a reload of the device. 0 noOp 1 reload" ::= { admin 1 } saveRunningConfig OBJECT-TYPE SYNTAX INTEGER { noOp (0), saveConfiguration (1) } ACCESS read-write STATUS mandatory DESCRIPTION "Save the device running configuration into the startup configuration. 0 noOp 1 saveConfiguration" ::= { admin 2 } -- **************************************************************************** -- defining the products objects -- **************************************************************************** mediatrix1400-2400 OBJECT IDENTIFIER ::= { products 2 } mediatrix1500-1600-2500-2600 OBJECT IDENTIFIER ::= { products 3 } -- **************************************************************************** -- defining the performance objects -- **************************************************************************** cpu OBJECT IDENTIFIER ::= { performance 10 } memory OBJECT IDENTIFIER ::= { performance 20 } temperature OBJECT IDENTIFIER ::= { performance 30 } gateway OBJECT IDENTIFIER ::= { performance 40 } -- **************************************************************************** -- defining the CPU objects -- **************************************************************************** cpuNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of CPUs present on this system." ::= { cpu 1 } cpuTable OBJECT-TYPE SYNTAX SEQUENCE OF CpuEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of CPU entries. The number of entries is given by the value of cpuNumber." ::= { cpu 2 } cpuEntry OBJECT-TYPE SYNTAX CpuEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A CPU entry containing objects for corresponding to the CPU." INDEX { cpuDescr } ::= { cpuTable 1 } CpuEntry ::= SEQUENCE { cpuDescr DisplayString, cpuWorkloadCurrent Gauge32, cpuWorkload1MinuteAverage Gauge32, cpuWorkload5MinuteAverage Gauge32 } cpuDescr OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "A name identifying the CPU." ::= { cpuEntry 1 } cpuWorkloadCurrent OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The current CPU workload in percent." ::= { cpuEntry 2 } cpuWorkload1MinuteAverage OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The CPU workload average over the last minute in percent." ::= { cpuEntry 3 } cpuWorkload5MinuteAverage OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The CPU workload average over the last 5 minutes in percent." ::= { cpuEntry 4 } -- **************************************************************************** -- defining the memory objects -- **************************************************************************** memoryPoolNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of memory pools present on this system." ::= { memory 1 } memoryPoolTable OBJECT-TYPE SYNTAX SEQUENCE OF MemoryPoolEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of memory pool entries. The number of entries is given by the value of memoryPoolNumber." ::= { memory 2 } memoryPoolEntry OBJECT-TYPE SYNTAX MemoryPoolEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A memory pool entry containing objects for the corresponding memory pool." INDEX { memDescr } ::= { memoryPoolTable 1 } MemoryPoolEntry ::= SEQUENCE { memDescr DisplayString, memTotalBytes INTEGER, memAllocatedBytes INTEGER, memFreeBytes INTEGER, memLargestFreeBlock INTEGER, memAllocatedBlocks INTEGER, memFreeBlocks INTEGER } memDescr OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "A name identifying the memory pool." ::= { memoryPoolEntry 1 } memTotalBytes OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "The total number of bytes belonging to the memory pool." ::= { memoryPoolEntry 2 } memAllocatedBytes OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The current number of allocated bytes in the memory pool." ::= { memoryPoolEntry 3 } memFreeBytes OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The current number of free bytes in the memory pool." ::= { memoryPoolEntry 4 } memLargestFreeBlock OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The size of the largest available free block." ::= { memoryPoolEntry 5 } memAllocatedBlocks OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The current number of allocated blocks in the memory pool." ::= { memoryPoolEntry 6 } memFreeBlocks OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The current number of free blocks in the memory pool." ::= { memoryPoolEntry 7 } -- **************************************************************************** -- defining the temperature probe objects -- **************************************************************************** tempProbeNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of temperature probes present on this system." ::= { temperature 1 } tempProbeTable OBJECT-TYPE SYNTAX SEQUENCE OF TempProbeEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of temperature probe entries. The number of entries is given by the value of tempProbeNumber." ::= { temperature 2 } tempProbeEntry OBJECT-TYPE SYNTAX TempProbeEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A temperature probe entry containing objects for the corresponding temperature probe." INDEX { tempProbeDescr } ::= { tempProbeTable 1 } TempProbeEntry ::= SEQUENCE { tempProbeDescr DisplayString, currentDegreesCelsius Gauge32 } tempProbeDescr OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "A description for the temperature probe." ::= { tempProbeEntry 1 } currentDegreesCelsius OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The current temperature measured by the temperature probe in degrees celsius." ::= { tempProbeEntry 2 } -- **************************************************************************** -- defining the gateway objects -- **************************************************************************** gwNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of gateways present on this system." ::= { gateway 1 } gwTable OBJECT-TYPE SYNTAX SEQUENCE OF GwEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of gateway entries. The number of entries is given by the value of gwNumber." ::= { gateway 2 } gwEntry OBJECT-TYPE SYNTAX GwEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A gateway entry containing objects for the corresponding gateway." INDEX { gwDescr } ::= { gwTable 1 } GwEntry ::= SEQUENCE { gwDescr DisplayString, gwCurrentConnectedCalls Gauge32, gwCurrentOngoingCalls Gauge32, gwTotalAccumulatedCalls Counter32 } gwDescr OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "A description of the gateway type." ::= { gwEntry 1 } gwCurrentConnectedCalls OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The total number of calls on all instances of this gateway type that are currently in the connected state." ::= { gwEntry 2 } gwCurrentOngoingCalls OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The total number of calls on all instances of this gateway type that are currently in the connected, a call setup or a call clearing state." ::= { gwEntry 3 } gwTotalAccumulatedCalls OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The total accumulated number of calls processed on all instances of this gateway type since the system has started." ::= { gwEntry 4 } END