-- ****************************************************************************
-- ****************************************************************************
--             Copyright(c) 2004 Mediatrix Telecom, Inc.
--  NOTICE:
--   This document contains information that is confidential and proprietary
--   to Mediatrix Telecom, Inc.
--   Mediatrix Telecom, Inc. reserves all rights to this document as well as
--   to the Intellectual Property of the document and the technology and
--   know-how that it includes and represents.
--   This publication cannot be reproduced, neither in whole nor in part in
--   any form whatsoever without written prior approval by
--   Mediatrix Telecom, Inc.
--   Mediatrix Telecom, Inc. reserves the right to revise this publication
--   and make changes at any time and without the obligation to notify any
--   person and/or entity of such revisions and/or changes.
-- ****************************************************************************
-- ****************************************************************************

MX-DHCP-MIB
DEFINITIONS ::= BEGIN

IMPORTS
        MODULE-IDENTITY,
        OBJECT-TYPE,
        Unsigned32,
        Integer32
    FROM SNMPv2-SMI
        MODULE-COMPLIANCE,
        OBJECT-GROUP
    FROM SNMPv2-CONF
        MxEnableState,
        MxActivationState,
        MxIpHostName,
        MxIpAddress,
        MxIpPort,
        MxAdvancedIpPort,
        MxIpSubnetMask,
        MxDigitMap
    FROM MX-TC
        MxUInt64,
        MxFloat32,
        MxIpHostNamePort,
        MxIpAddr,
        MxIpAddrPort,
        MxIpAddrMask,
        MxUri,
        MxUrl
    FROM MX-TC2
        mediatrixServices
    FROM MX-SMI2;

dhcpMIB MODULE-IDENTITY
 LAST-UPDATED   "1910210000Z"
 ORGANIZATION " Mediatrix Telecom, Inc. "
 CONTACT-INFO " Mediatrix Telecom, Inc.
                4229, Garlock Street
                Sherbrooke (Quebec)
                Canada
                Phone: (819) 829-8749
                "
 DESCRIPTION  " Dynamic Host Configuration Protocol Server

                The Dynamic Host Configuration Protocol (DHCP) service manages
                a DHCP server on each network interface.
                "
 ::= { mediatrixServices 1900 }

dhcpMIBObjects OBJECT IDENTIFIER ::= { dhcpMIB 1 }

-- *****************************************************************************

-- Table:Subnets

-- *****************************************************************************

subnetsTable OBJECT-TYPE
 SYNTAX        SEQUENCE OF SubnetsEntry
 MAX-ACCESS    not-accessible
 STATUS        current
 DESCRIPTION " Subnets

               This table configures the subnets of the DHCP server. The
               NetworkInterfaceName parameter must match a network interface
               that is Up and the EnableSubnet parameter must be set to
               'Enable' to properly activate the DHCP server on that interface.

               The Dhcp.AddSubnet command may be used to add a new subnet to
               the SubnetsTable and to all subnet-specific configuration
               tables.

               "
 ::= { dhcpMIBObjects 100 }
 subnetsEntry OBJECT-TYPE
  SYNTAX        SubnetsEntry
  MAX-ACCESS    not-accessible
  STATUS        current
  DESCRIPTION " A row in table Subnets. "
  INDEX         {
                  subnetsNetworkInterfaceName
                }

  ::= { subnetsTable 1 }

 SubnetsEntry ::= SEQUENCE
 {
   subnetsNetworkInterfaceName            OCTET STRING,
   subnetsEnableSubnet                    MxEnableState,
   subnetsStartAddress                    MxIpAddr,
   subnetsEndAddress                      MxIpAddr,
   subnetsAutomaticConfigurationInterface OCTET STRING,
   subnetsConfigStatus                    INTEGER,
   subnetsDelete                          INTEGER
 }

 -- Index:Network Interface

 subnetsNetworkInterfaceName OBJECT-TYPE
  SYNTAX        OCTET STRING
  MAX-ACCESS    read-only
  STATUS        current
  DESCRIPTION " Network Interface

                Network interface on which the DHCP server is active. That
                interface must be up for the DHCP server to become active.
                "
  ::= { subnetsEntry 100 }

 -- Columnar:Enable

 subnetsEnableSubnet OBJECT-TYPE
  SYNTAX        MxEnableState
  MAX-ACCESS    read-write
  STATUS        current
  DESCRIPTION " Enable

                Enables the subnet configuration. Activates the DHCP server on
                the subnet when enabled.
                "
  DEFVAL        { disable }
  ::= { subnetsEntry 200 }

 -- Columnar:Start Address

 subnetsStartAddress OBJECT-TYPE
  SYNTAX        MxIpAddr
  MAX-ACCESS    read-write
  STATUS        current
  DESCRIPTION " Start Address

                Start address of the subnet range. It MUST be within the
                network interface's subnet.
                "
  DEFVAL        { "" }
  ::= { subnetsEntry 300 }

 -- Columnar:End Address

 subnetsEndAddress OBJECT-TYPE
  SYNTAX        MxIpAddr
  MAX-ACCESS    read-write
  STATUS        current
  DESCRIPTION " End Address

                End address of the subnet range. It MUST be within the network
                interface's subnet and higher than or equal to the StartAddress
                value.

                "
  DEFVAL        { "" }
  ::= { subnetsEntry 400 }

 -- Columnar:Configuration Interface

 subnetsAutomaticConfigurationInterface OBJECT-TYPE
  SYNTAX        OCTET STRING ( SIZE(0..50) )
  MAX-ACCESS    read-write
  STATUS        current
  DESCRIPTION " Configuration Interface

                The network interface that provides the automatic configuration
                (E.g.: DNS servers, NTP server, etc.) to this subnet.
                "
  DEFVAL        { "" }
  ::= { subnetsEntry 450 }

 -- Columnar:Status

 subnetsConfigStatus OBJECT-TYPE
  SYNTAX        INTEGER { disabled(100) , invalidConfig(200) , ok(300) }
  MAX-ACCESS    read-only
  STATUS        current
  DESCRIPTION " Status

                Subnet configuration status.

                  * Disabled: The EnableSubnet parameter is disabled or the
                    NetworkInterfaceName parameter does not match a network
                    interface that is Up.
                  * InvalidConfig: The start or end address range is out of the
                    network interface's subnet, or both parameters are
                    incompatible.
                  * Ok: The EnableSubnet parameter is enabled and the subnet
                    configuration is valid.

                "
  ::= { subnetsEntry 500 }

 -- Row command:Delete

 subnetsDelete OBJECT-TYPE
  SYNTAX        INTEGER { noOp(0), delete(10) }
  MAX-ACCESS    read-write
  STATUS        current
  DESCRIPTION " Delete

                Deletes a row from the table.
                "
  DEFVAL        { noOp }
  ::= { subnetsEntry 600 }

-- End of table:Subnets

-- ****************************************************************************

-- Group:Domain Name

-- ****************************************************************************

domainNameGroup OBJECT IDENTIFIER
 ::= { dhcpMIBObjects 200 }
 -- Scalar:Configuration Source

 defaultDomainNameConfigSource OBJECT-TYPE
  SYNTAX        INTEGER { hostConfiguration(200) , static(400) }
  MAX-ACCESS    read-write
  STATUS        current
  DESCRIPTION " Configuration Source

                Default configuration source of all subnets.

                  * HostConfiguration: The domain name is the one used by the
                    unit.
                  * Static: The domain name is specified in the
                    DefaultStaticDomainName parameter.

                "
  DEFVAL        { hostConfiguration }
  ::= { domainNameGroup 100 }

 -- Scalar:Static Domain Name

 defaultStaticDomainName OBJECT-TYPE
  SYNTAX        MxIpHostName
  MAX-ACCESS    read-write
  STATUS        current
  DESCRIPTION " Static Domain Name

                Default static domain name for all subnets.
                "
  DEFVAL        { "" }
  ::= { domainNameGroup 200 }

 -- ***************************************************************************
 
 -- Table:Subnet Domain Names

 -- ***************************************************************************
 
 specificDomainNamesTable OBJECT-TYPE
  SYNTAX        SEQUENCE OF SpecificDomainNamesEntry
  MAX-ACCESS    not-accessible
  STATUS        current
  DESCRIPTION " Subnet Domain Names

                This table specifies subnet-specific domain names
                configurations. All subnets use the default configuration
                unless the SpecificDomainNames.EnableConfig parameter is set
                to 'Enable'.

                The Dhcp.AddSubnet command may be used to add a new subnet to
                the SubnetsTable and to all subnet-specific configuration
                tables.

                "
  ::= { domainNameGroup 300 }
  specificDomainNamesEntry OBJECT-TYPE
   SYNTAX        SpecificDomainNamesEntry
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION " A row in table Subnet Domain Names. "
   INDEX         {
                   specificDomainNamesSubnetName
                 }

   ::= { specificDomainNamesTable 1 }

  SpecificDomainNamesEntry ::= SEQUENCE
  {
    specificDomainNamesSubnetName   OCTET STRING,
    specificDomainNamesEnableConfig MxEnableState,
    specificDomainNamesEnableOption MxEnableState,
    specificDomainNamesConfigSource INTEGER,
    specificDomainNamesStaticName   MxIpHostName
  }

  -- Index:Subnet Name

  specificDomainNamesSubnetName OBJECT-TYPE
   SYNTAX          OCTET STRING
   MAX-ACCESS      read-only
   STATUS          current
   DESCRIPTION   " Subnet Name

                   Name of the subnet.
                   "
   ::= { specificDomainNamesEntry 100 }

  -- Columnar:Enable

  specificDomainNamesEnableConfig OBJECT-TYPE
   SYNTAX        MxEnableState
   MAX-ACCESS    read-write
   STATUS        current
   DESCRIPTION " Enable

                 Defines the domain name configuration to use for this
                 specific subnet.

                   * Disable: The subnet uses the default configuration as
                     defined in the DefaultDomainNameConfigSource and
                     DefaultStaticDomainName parameters.
                   * Enable: The subnet uses the specific configuration as
                     defined in the SpecificDomainNames.ConfigSource and
                     SpecificDomainNames.StaticName parameters.

                 The configuration is only valid when the
                 SpecificDomainNames.EnableOption parameter is set to
                 'Enable'.

                 "
   DEFVAL        { disable }
   ::= { specificDomainNamesEntry 200 }

  -- Columnar:Enable Option

  specificDomainNamesEnableOption OBJECT-TYPE
   SYNTAX        MxEnableState
   MAX-ACCESS    read-write
   STATUS        current
   DESCRIPTION " Enable Option

                 Enables the domain name (option 15).
                 "
   DEFVAL        { disable }
   ::= { specificDomainNamesEntry 300 }

  -- Columnar:Configuration Source

  specificDomainNamesConfigSource OBJECT-TYPE
   SYNTAX        INTEGER { hostConfiguration(200) , static(400) }
   MAX-ACCESS    read-write
   STATUS        current
   DESCRIPTION " Configuration Source

                 Subnet's domain name specific configuration source.

                   * HostConfiguration: The domain name is obtained from the
                     host configuration.
                   * Static: The domain name is specified in the StaticName
                     parameter.

                 This configuration overrides the default configuration set in
                 the DefaultDomainNameConfigSource parameter when the
                 SpecificDomainNames.EnableConfig parameter is set to
                 'Enable'.

                 "
   DEFVAL        { static }
   ::= { specificDomainNamesEntry 400 }

  -- Columnar:Static Domain Name

  specificDomainNamesStaticName OBJECT-TYPE
   SYNTAX        MxIpHostName
   MAX-ACCESS    read-write
   STATUS        current
   DESCRIPTION " Static Domain Name

                 Static Domain Name Configuration. The
                 SpecificDomainNames.ConfigSource parameter must be set to
                 'Static' for this value to be applied.

                 This configuration overrides the default configuration set in
                 the DefaultStaticDomainName parameter when the
                 SpecificDomainNames.EnableConfig parameter is set to
                 'Enable'.

                 "
   DEFVAL        { "" }
   ::= { specificDomainNamesEntry 500 }

 -- End of table:Subnet Domain Names

 -- ******************************************************************
 
 -- Table:Domain Names Information

 -- ******************************************************************
 
 domainNamesInfoTable OBJECT-TYPE
  SYNTAX        SEQUENCE OF DomainNamesInfoEntry
  MAX-ACCESS    not-accessible
  STATUS        current
  DESCRIPTION " Domain Names Information

                This table contains the active subnets' domain names.
                "
  ::= { domainNameGroup 400 }
  domainNamesInfoEntry OBJECT-TYPE
   SYNTAX        DomainNamesInfoEntry
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION " A row in table Domain Names Information. "
   INDEX         {
                   domainNamesInfoSubnetName
                 }

   ::= { domainNamesInfoTable 1 }

  DomainNamesInfoEntry ::= SEQUENCE
  {
    domainNamesInfoSubnetName OCTET STRING,
    domainNamesInfoDomainName OCTET STRING
  }

  -- Index:Subnet Name

  domainNamesInfoSubnetName OBJECT-TYPE
   SYNTAX         OCTET STRING
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION  " Subnet Name

                  Name of the subnet.
                  "
   ::= { domainNamesInfoEntry 100 }

  -- Columnar:Domain Name

  domainNamesInfoDomainName OBJECT-TYPE
   SYNTAX        OCTET STRING
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION " Domain Name

                 Indicates the subnet's current domain name.
                 "
   ::= { domainNamesInfoEntry 200 }

 -- End of table:Domain Names Information

-- End of group:Domain Name

-- ****************************************************************************

-- Group:Lease Time Configuration

-- ****************************************************************************

leaseTimeGroup OBJECT IDENTIFIER
 ::= { dhcpMIBObjects 300 }
 -- Scalar:Lease Time

 defaultLeaseTime OBJECT-TYPE
  SYNTAX        Unsigned32
  MAX-ACCESS    read-write
  STATUS        current
  DESCRIPTION " Lease Time

                Specifies the lease time (in seconds) default setting for all
                subnets.
                "
  DEFVAL        { 86400 }
  ::= { leaseTimeGroup 100 }

 -- ***************************************************************************
 
 -- Table:Subnet Lease Times

 -- ***************************************************************************
 
 specificLeaseTimesTable OBJECT-TYPE
  SYNTAX        SEQUENCE OF SpecificLeaseTimesEntry
  MAX-ACCESS    not-accessible
  STATUS        current
  DESCRIPTION " Subnet Lease Times

                This table specifies subnet-specific lease times
                configurations. All subnets use the default configuration
                unless the SpecificLeaseTimes.EnableConfig parameter is set to
                'Enable'.

                The Dhcp.AddSubnet command may be used to add a new subnet to
                the SubnetsTable and to all subnet-specific configuration
                tables.

                "
  ::= { leaseTimeGroup 200 }
  specificLeaseTimesEntry OBJECT-TYPE
   SYNTAX        SpecificLeaseTimesEntry
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION " A row in table Subnet Lease Times. "
   INDEX         {
                   specificLeaseTimesSubnetName
                 }

   ::= { specificLeaseTimesTable 1 }

  SpecificLeaseTimesEntry ::= SEQUENCE
  {
    specificLeaseTimesSubnetName   OCTET STRING,
    specificLeaseTimesEnableConfig MxEnableState,
    specificLeaseTimesLeaseTime    Unsigned32
  }

  -- Index:Subnet Name

  specificLeaseTimesSubnetName OBJECT-TYPE
   SYNTAX          OCTET STRING
   MAX-ACCESS      read-only
   STATUS          current
   DESCRIPTION   " Subnet Name

                   Name of the subnet.
                   "
   ::= { specificLeaseTimesEntry 100 }

  -- Columnar:Enable

  specificLeaseTimesEnableConfig OBJECT-TYPE
   SYNTAX        MxEnableState
   MAX-ACCESS    read-write
   STATUS        current
   DESCRIPTION " Enable

                 Defines the lease time configuration to use for this specific
                 subnet.

                   * Disable: The subnet uses the default configuration as
                     defined in the DefaultLeaseTime parameter.
                   * Enable: The subnet uses the specific configuration as
                     defined in the SpecificLeaseTimes.LeaseTime parameter.

                 "
   DEFVAL        { disable }
   ::= { specificLeaseTimesEntry 200 }

  -- Columnar:Lease Time

  specificLeaseTimesLeaseTime OBJECT-TYPE
   SYNTAX        Unsigned32
   MAX-ACCESS    read-write
   STATUS        current
   DESCRIPTION " Lease Time

                 Specifies the subnet's specific lease time in seconds.

                 This configuration overrides the default configuration set in
                 the DefaultLeaseTime parameter when the
                 SpecificLeaseTimes.EnableConfig parameter is set to 'Enable'.

                 "
   DEFVAL        { 86400 }
   ::= { specificLeaseTimesEntry 300 }

 -- End of table:Subnet Lease Times

 -- ***************************************************************************
 
 -- Table:Lease Times

 -- ***************************************************************************
 
 leaseTimesInfoTable OBJECT-TYPE
  SYNTAX         SEQUENCE OF LeaseTimesInfoEntry
  MAX-ACCESS     not-accessible
  STATUS         current
  DESCRIPTION  " Lease Times

                 This table contains the active subnets' lease times.
                 "
  ::= { leaseTimeGroup 300 }
  leaseTimesInfoEntry OBJECT-TYPE
   SYNTAX        LeaseTimesInfoEntry
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION " A row in table Lease Times. "
   INDEX         {
                   leaseTimesInfoSubnetName
                 }

   ::= { leaseTimesInfoTable 1 }

  LeaseTimesInfoEntry ::= SEQUENCE
  {
    leaseTimesInfoSubnetName OCTET STRING,
    leaseTimesInfoDefault    Unsigned32
  }

  -- Index:Subnet Name

  leaseTimesInfoSubnetName OBJECT-TYPE
   SYNTAX        OCTET STRING
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION " Subnet Name

                 Name of the subnet.
                 "
   ::= { leaseTimesInfoEntry 100 }

  -- Columnar:Lease Time

  leaseTimesInfoDefault OBJECT-TYPE
   SYNTAX        Unsigned32
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION " Lease Time

                 Indicates the subnet's current default lease time in seconds.
                 "
   ::= { leaseTimesInfoEntry 200 }

 -- End of table:Lease Times

-- End of group:Lease Time Configuration

-- ****************************************************************************

-- Group:Default Router

-- ****************************************************************************

defaultRouterGroup OBJECT IDENTIFIER
 ::= { dhcpMIBObjects 400 }
 -- ***************************************************************************
 
 -- Table:Subnet Default Routers

 -- ***************************************************************************
 
 specificDefaultRoutersTable OBJECT-TYPE
  SYNTAX        SEQUENCE OF SpecificDefaultRoutersEntry
  MAX-ACCESS    not-accessible
  STATUS        current
  DESCRIPTION " Subnet Default Routers

                This table specifies subnet-specific default routers
                configurations.

                The Dhcp.AddSubnet command may be used to add a new subnet to
                the SubnetsTable and to all subnet-specific configuration
                tables.

                "
  ::= { defaultRouterGroup 100 }
  specificDefaultRoutersEntry OBJECT-TYPE
   SYNTAX        SpecificDefaultRoutersEntry
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION " A row in table Subnet Default Routers. "
   INDEX         {
                   specificDefaultRoutersSubnetName
                 }

   ::= { specificDefaultRoutersTable 1 }

  SpecificDefaultRoutersEntry ::= SEQUENCE
  {
    specificDefaultRoutersSubnetName   OCTET STRING,
    specificDefaultRoutersEnableOption MxEnableState,
    specificDefaultRoutersConfigSource INTEGER,
    specificDefaultRoutersStaticRouter MxIpAddr
  }

  -- Index:Subnet Name

  specificDefaultRoutersSubnetName OBJECT-TYPE
   SYNTAX            OCTET STRING
   MAX-ACCESS        read-only
   STATUS            current
   DESCRIPTION     " Subnet Name

                     Name of the subnet.
                     "
   ::= { specificDefaultRoutersEntry 100 }

  -- Columnar:Enable Option

  specificDefaultRoutersEnableOption OBJECT-TYPE
   SYNTAX        MxEnableState
   MAX-ACCESS    read-write
   STATUS        current
   DESCRIPTION " Enable Option

                 Enables the default router (option 3).
                 "
   DEFVAL        { enable }
   ::= { specificDefaultRoutersEntry 200 }

  -- Columnar:Configuration Source

  specificDefaultRoutersConfigSource OBJECT-TYPE
   SYNTAX        INTEGER { hostInterface(100) , static(400) }
   MAX-ACCESS    read-write
   STATUS        current
   DESCRIPTION " Configuration Source

                 The subnet's specific router configuration source.

                   * HostInterface: The default router is the host address
                     within the client's subnet.
                   * Static: The default router is specified in the
                     SpecificDefaultRouters.StaticRouter parameter.

                 "
   DEFVAL        { hostInterface }
   ::= { specificDefaultRoutersEntry 300 }

  -- Columnar:Static Default Router

  specificDefaultRoutersStaticRouter OBJECT-TYPE
   SYNTAX        MxIpAddr
   MAX-ACCESS    read-write
   STATUS        current
   DESCRIPTION " Static Default Router

                 Specifies the subnet's default router. The
                 SpecificDefaultRouters.ConfigSource parameter must be set to
                 'Static' for this value to be applied.

                 "
   DEFVAL        { "" }
   ::= { specificDefaultRoutersEntry 400 }

 -- End of table:Subnet Default Routers

 -- *********************************************************************
 
 -- Table:Default Routers

 -- *********************************************************************
 
 defaultRoutersInfoTable OBJECT-TYPE
  SYNTAX        SEQUENCE OF DefaultRoutersInfoEntry
  MAX-ACCESS    not-accessible
  STATUS        current
  DESCRIPTION " Default Routers

                This table contains the active subnets' default routers.
                "
  ::= { defaultRouterGroup 200 }
  defaultRoutersInfoEntry OBJECT-TYPE
   SYNTAX        DefaultRoutersInfoEntry
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION " A row in table Default Routers. "
   INDEX         {
                   defaultRoutersInfoSubnetName
                 }

   ::= { defaultRoutersInfoTable 1 }

  DefaultRoutersInfoEntry ::= SEQUENCE
  {
    defaultRoutersInfoSubnetName    OCTET STRING,
    defaultRoutersInfoDefaultRouter MxIpAddr
  }

  -- Index:Subnet Name

  defaultRoutersInfoSubnetName OBJECT-TYPE
   SYNTAX          OCTET STRING
   MAX-ACCESS      read-only
   STATUS          current
   DESCRIPTION   " Subnet Name

                   Name of the subnet.
                   "
   ::= { defaultRoutersInfoEntry 100 }

  -- Columnar:Default Router

  defaultRoutersInfoDefaultRouter OBJECT-TYPE
   SYNTAX        MxIpAddr
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION " Default Router

                 Indicates the subnet's current default router.
                 "
   ::= { defaultRoutersInfoEntry 200 }

 -- End of table:Default Routers

-- End of group:Default Router

-- ****************************************************************************

-- Group:DNS Servers

-- ****************************************************************************

dnsServersGroup OBJECT IDENTIFIER
 ::= { dhcpMIBObjects 500 }
 -- Scalar:Configuration Source

 defaultDnsServersConfigSource OBJECT-TYPE
  SYNTAX        INTEGER { hostConfiguration(200) , automatic(300) , static
                (400) }
  MAX-ACCESS    read-write
  STATUS        current
  DESCRIPTION " Configuration Source

                Default configuration source for the DNS servers of all
                subnets.

                  * HostConfiguration: The DNS servers are obtained from the
                    host configuration.
                  * Automatic: The DNS servers are automatically obtained from
                    the network configured in the
                    Subnets.AutomaticConfigurationInterface parameter of this
                    subnet.
                  * Static: The DNS servers are specified in the
                    DefaultStaticDnsServers table.

                "
  DEFVAL        { hostConfiguration }
  ::= { dnsServersGroup 100 }

 -- ***************************************************************************
 
 -- Table:Static DNS Servers

 -- ***************************************************************************
 
 defaultStaticDnsServersTable OBJECT-TYPE
  SYNTAX        SEQUENCE OF DefaultStaticDnsServersEntry
  MAX-ACCESS    not-accessible
  STATUS        current
  DESCRIPTION " Static DNS Servers

                This table contains the list of default static DNS servers for
                all subnets. The DNS servers are sorted by priority. These DNS
                servers are used as the current DNS servers when the Default
                DnsServersConfigSource parameter is set to 'Static'.

                "
  ::= { dnsServersGroup 200 }
  defaultStaticDnsServersEntry OBJECT-TYPE
   SYNTAX        DefaultStaticDnsServersEntry
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION " A row in table Static DNS Servers. "
   INDEX         {
                   defaultStaticDnsServersPriority
                 }

   ::= { defaultStaticDnsServersTable 1 }

  DefaultStaticDnsServersEntry ::= SEQUENCE
  {
    defaultStaticDnsServersPriority  Unsigned32,
    defaultStaticDnsServersIpAddress MxIpAddr
  }

  -- Index:Priority

  defaultStaticDnsServersPriority OBJECT-TYPE
   SYNTAX        Unsigned32 ( 1..4 )
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION " Priority

                 Priority number of this static DNS server. The lower the
                 number is, the higher the priority is.
                 "
   ::= { defaultStaticDnsServersEntry 100 }

  -- Columnar:IP Address

  defaultStaticDnsServersIpAddress OBJECT-TYPE
   SYNTAX        MxIpAddr
   MAX-ACCESS    read-write
   STATUS        current
   DESCRIPTION " IP Address

                 Static DNS server's IP address.
                 "
   ::= { defaultStaticDnsServersEntry 200 }

 -- End of table:Static DNS Servers

 -- ***************************************************************************
 
 -- Table:Subnet DNS Servers

 -- ***************************************************************************
 
 specificDnsServersTable OBJECT-TYPE
  SYNTAX        SEQUENCE OF SpecificDnsServersEntry
  MAX-ACCESS    not-accessible
  STATUS        current
  DESCRIPTION " Subnet DNS Servers

                This table specifies subnet-specific DNS servers
                configurations. All subnets use the default configuration
                unless the SpecificDnsServers.EnableConfig parameter is set to
                'Enable'.

                The Dhcp.AddSubnet command may be used to add a new subnet to
                the SubnetsTable and to all subnet-specific configuration
                tables.

                "
  ::= { dnsServersGroup 300 }
  specificDnsServersEntry OBJECT-TYPE
   SYNTAX        SpecificDnsServersEntry
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION " A row in table Subnet DNS Servers. "
   INDEX         {
                   specificDnsServersSubnetName
                 }

   ::= { specificDnsServersTable 1 }

  SpecificDnsServersEntry ::= SEQUENCE
  {
    specificDnsServersSubnetName   OCTET STRING,
    specificDnsServersEnableConfig MxEnableState,
    specificDnsServersEnableOption MxEnableState,
    specificDnsServersConfigSource INTEGER,
    specificDnsServersStaticDns1   MxIpAddr,
    specificDnsServersStaticDns2   MxIpAddr,
    specificDnsServersStaticDns3   MxIpAddr,
    specificDnsServersStaticDns4   MxIpAddr
  }

  -- Index:Subnet Name

  specificDnsServersSubnetName OBJECT-TYPE
   SYNTAX          OCTET STRING
   MAX-ACCESS      read-only
   STATUS          current
   DESCRIPTION   " Subnet Name

                   Name of the subnet.
                   "
   ::= { specificDnsServersEntry 100 }

  -- Columnar:Enable

  specificDnsServersEnableConfig OBJECT-TYPE
   SYNTAX        MxEnableState
   MAX-ACCESS    read-write
   STATUS        current
   DESCRIPTION " Enable

                 Defines the DNS servers configuration to use for this
                 specific subnet.

                   * Disable: The subnet uses the default configuration as
                     defined in the DefaultDnsServersConfigSource and
                     DefaultStaticDnsServers.IpAddress parameters.
                   * Enable: The subnet uses the specific configuration as
                     defined in the following parameters:
                     SpecificDnsServers.ConfigSource,
                     SpecificDnsServers.StaticDns1,
                     SpecificDnsServers.StaticDns2,
                     SpecificDnsServers.StaticDns3, and
                     SpecificDnsServers.StaticDns4.

                 The configuration is only valid when the
                 SpecificDnsServers.EnableOption parameter is set to 'Enable'.

                 "
   DEFVAL        { disable }
   ::= { specificDnsServersEntry 200 }

  -- Columnar:Enable Option

  specificDnsServersEnableOption OBJECT-TYPE
   SYNTAX        MxEnableState
   MAX-ACCESS    read-write
   STATUS        current
   DESCRIPTION " Enable Option

                 Enables the DNS servers (option 6).
                 "
   DEFVAL        { enable }
   ::= { specificDnsServersEntry 300 }

  -- Columnar:Configuration Source

  specificDnsServersConfigSource OBJECT-TYPE
   SYNTAX        INTEGER { hostConfiguration(200) , automatic(300) , static
                 (400) }
   MAX-ACCESS    read-write
   STATUS        current
   DESCRIPTION " Configuration Source

                 DNS servers specific configuration source for the subnet.

                   * HostConfiguration: The DNS servers are obtained from the
                     host configuration.
                   * Automatic: The DNS servers are automatically obtained
                     from the network configured in the
                     Subnets.AutomaticConfigurationInterface parameter of this
                     subnet.
                   * Static: The DNS servers are specified in the StaticDns
                     parameters of this table.

                 This configuration overrides the default configuration set in
                 the DefaultDnsServersConfigSource parameter when the
                 SpecificDnsServers.EnableConfig parameter is set to 'Enable'.

                 "
   DEFVAL        { static }
   ::= { specificDnsServersEntry 400 }

  -- Columnar:Static DNS 1

  specificDnsServersStaticDns1 OBJECT-TYPE
   SYNTAX        MxIpAddr
   MAX-ACCESS    read-write
   STATUS        current
   DESCRIPTION " Static DNS 1

                 IP address of the first DNS server of the subnet. The
                 SpecificDnsServers.ConfigSource parameter must be set to
                 'Static' for this value to be applied.

                 This configuration overrides the default configuration set in
                 the DefaultStaticDnsServers.IpAddress parameter when the
                 SpecificDnsServers.EnableConfig parameter is set to 'Enable'.

                 "
   DEFVAL        { "" }
   ::= { specificDnsServersEntry 500 }

  -- Columnar:Static DNS 2

  specificDnsServersStaticDns2 OBJECT-TYPE
   SYNTAX        MxIpAddr
   MAX-ACCESS    read-write
   STATUS        current
   DESCRIPTION " Static DNS 2

                 IP address of the second DNS server of the subnet. The
                 SpecificDnsServers.ConfigSource parameter must be set to
                 'Static' for this value to be applied.

                 This configuration overrides the default configuration set in
                 the DefaultStaticDnsServers.IpAddress parameter when the
                 SpecificDnsServers.EnableConfig parameter is set to 'Enable'.

                 "
   DEFVAL        { "" }
   ::= { specificDnsServersEntry 600 }

  -- Columnar:Static DNS 3

  specificDnsServersStaticDns3 OBJECT-TYPE
   SYNTAX        MxIpAddr
   MAX-ACCESS    read-write
   STATUS        current
   DESCRIPTION " Static DNS 3

                 IP address of the third DNS server of the subnet. The
                 SpecificDnsServers.ConfigSource parameter must be set to
                 'Static' for this value to be applied.

                 This configuration overrides the default configuration set in
                 the DefaultStaticDnsServers.IpAddress parameter when the
                 SpecificDnsServers.EnableConfig parameter is set to 'Enable'.

                 "
   DEFVAL        { "" }
   ::= { specificDnsServersEntry 700 }

  -- Columnar:Static DNS 4

  specificDnsServersStaticDns4 OBJECT-TYPE
   SYNTAX        MxIpAddr
   MAX-ACCESS    read-write
   STATUS        current
   DESCRIPTION " Static DNS 4

                 IP address of the fourth DNS server of the subnet. The
                 SpecificDnsServers.ConfigSource parameter must be set to
                 'Static' for this value to be applied.

                 This configuration overrides the default configuration set in
                 the DefaultStaticDnsServers.IpAddress parameter when the
                 SpecificDnsServers.EnableConfig parameter is set to 'Enable'.

                 "
   DEFVAL        { "" }
   ::= { specificDnsServersEntry 800 }

 -- End of table:Subnet DNS Servers

 -- *****************************************************************
 
 -- Table:DNS Servers

 -- *****************************************************************
 
 dnsServersInfoTable OBJECT-TYPE
  SYNTAX        SEQUENCE OF DnsServersInfoEntry
  MAX-ACCESS    not-accessible
  STATUS        current
  DESCRIPTION " DNS Servers

                This table contains the active subnets' DNS servers.
                "
  ::= { dnsServersGroup 400 }
  dnsServersInfoEntry OBJECT-TYPE
   SYNTAX        DnsServersInfoEntry
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION " A row in table DNS Servers. "
   INDEX         {
                   dnsServersInfoSubnetName
                 }

   ::= { dnsServersInfoTable 1 }

  DnsServersInfoEntry ::= SEQUENCE
  {
    dnsServersInfoSubnetName OCTET STRING,
    dnsServersInfoDns1       MxIpAddr,
    dnsServersInfoDns2       MxIpAddr,
    dnsServersInfoDns3       MxIpAddr,
    dnsServersInfoDns4       MxIpAddr
  }

  -- Index:Subnet Name

  dnsServersInfoSubnetName OBJECT-TYPE
   SYNTAX        OCTET STRING
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION " Subnet Name

                 Name of the subnet.
                 "
   ::= { dnsServersInfoEntry 100 }

  -- Columnar:DNS 1

  dnsServersInfoDns1 OBJECT-TYPE
   SYNTAX        MxIpAddr
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION " DNS 1

                 Indicates the subnets' first DNS server.
                 "
   ::= { dnsServersInfoEntry 200 }

  -- Columnar:DNS 2

  dnsServersInfoDns2 OBJECT-TYPE
   SYNTAX        MxIpAddr
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION " DNS 2

                 Indicates the subnets' second DNS server.
                 "
   ::= { dnsServersInfoEntry 300 }

  -- Columnar:DNS 3

  dnsServersInfoDns3 OBJECT-TYPE
   SYNTAX        MxIpAddr
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION " DNS 3

                 Indicates the subnets' third DNS server.
                 "
   ::= { dnsServersInfoEntry 400 }

  -- Columnar:DNS 4

  dnsServersInfoDns4 OBJECT-TYPE
   SYNTAX        MxIpAddr
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION " DNS 4

                 Indicates the subnets' fourth DNS server.
                 "
   ::= { dnsServersInfoEntry 500 }

 -- End of table:DNS Servers

-- End of group:DNS Servers

-- ****************************************************************************

-- Group:NTP Servers

-- ****************************************************************************

ntpServersGroup OBJECT IDENTIFIER
 ::= { dhcpMIBObjects 600 }
 -- Scalar:Configuration Source

 defaultNtpServersConfigSource OBJECT-TYPE
  SYNTAX        INTEGER { hostConfiguration(200) , automatic(300) , static
                (400) }
  MAX-ACCESS    read-write
  STATUS        current
  DESCRIPTION " Configuration Source

                Default configuration source for the NTP servers of all
                subnets.

                  * HostConfiguration: The NTP servers are obtained from the
                    host configuration.
                  * Automatic: The NTP servers are automatically obtained from
                    the network configured in the
                    Subnets.AutomaticConfigurationInterface parameter of this
                    subnet.
                  * Static: The NTP servers are specified in the
                    DefaultStaticNtpServers table.

                "
  DEFVAL        { hostConfiguration }
  ::= { ntpServersGroup 100 }

 -- ***************************************************************************
 
 -- Table:Static NTP Servers

 -- ***************************************************************************
 
 defaultStaticNtpServersTable OBJECT-TYPE
  SYNTAX        SEQUENCE OF DefaultStaticNtpServersEntry
  MAX-ACCESS    not-accessible
  STATUS        current
  DESCRIPTION " Static NTP Servers

                This table contains the list of default static NTP servers for
                all subnets. The NTP servers are sorted by priority. These NTP
                servers are used as the current NTP servers when the
                DefaultNtpServersConfigSource parameter is set to 'Static'.

                "
  ::= { ntpServersGroup 200 }
  defaultStaticNtpServersEntry OBJECT-TYPE
   SYNTAX        DefaultStaticNtpServersEntry
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION " A row in table Static NTP Servers. "
   INDEX         {
                   defaultStaticNtpServersPriority
                 }

   ::= { defaultStaticNtpServersTable 1 }

  DefaultStaticNtpServersEntry ::= SEQUENCE
  {
    defaultStaticNtpServersPriority  Unsigned32,
    defaultStaticNtpServersIpAddress MxIpAddr
  }

  -- Index:Priority

  defaultStaticNtpServersPriority OBJECT-TYPE
   SYNTAX        Unsigned32 ( 1..4 )
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION " Priority

                 Priority number of this static NTP server. The lower the
                 number is, the higher the priority is.
                 "
   ::= { defaultStaticNtpServersEntry 100 }

  -- Columnar:IP Address

  defaultStaticNtpServersIpAddress OBJECT-TYPE
   SYNTAX        MxIpAddr
   MAX-ACCESS    read-write
   STATUS        current
   DESCRIPTION " IP Address

                 NTP server's static IP address.
                 "
   ::= { defaultStaticNtpServersEntry 200 }

 -- End of table:Static NTP Servers

 -- ***************************************************************************
 
 -- Table:Subnet NTP Servers

 -- ***************************************************************************
 
 specificNtpServersTable OBJECT-TYPE
  SYNTAX        SEQUENCE OF SpecificNtpServersEntry
  MAX-ACCESS    not-accessible
  STATUS        current
  DESCRIPTION " Subnet NTP Servers

                This table specifies subnet-specific NTP servers
                configurations. All subnets use the default configuration
                unless the SpecificNtpServers.EnableConfig parameter is set to
                'Enable'.

                The Dhcp.AddSubnet command may be used to add a new subnet to
                the SubnetsTable and to all subnet-specific configuration
                tables.

                "
  ::= { ntpServersGroup 300 }
  specificNtpServersEntry OBJECT-TYPE
   SYNTAX        SpecificNtpServersEntry
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION " A row in table Subnet NTP Servers. "
   INDEX         {
                   specificNtpServersSubnetName
                 }

   ::= { specificNtpServersTable 1 }

  SpecificNtpServersEntry ::= SEQUENCE
  {
    specificNtpServersSubnetName   OCTET STRING,
    specificNtpServersEnableConfig MxEnableState,
    specificNtpServersEnableOption MxEnableState,
    specificNtpServersConfigSource INTEGER,
    specificNtpServersStaticNtp1   MxIpAddr,
    specificNtpServersStaticNtp2   MxIpAddr,
    specificNtpServersStaticNtp3   MxIpAddr,
    specificNtpServersStaticNtp4   MxIpAddr
  }

  -- Index:Subnet Name

  specificNtpServersSubnetName OBJECT-TYPE
   SYNTAX          OCTET STRING
   MAX-ACCESS      read-only
   STATUS          current
   DESCRIPTION   " Subnet Name

                   Name of the subnet.
                   "
   ::= { specificNtpServersEntry 100 }

  -- Columnar:Enable

  specificNtpServersEnableConfig OBJECT-TYPE
   SYNTAX        MxEnableState
   MAX-ACCESS    read-write
   STATUS        current
   DESCRIPTION " Enable

                 Defines the NTP servers configuration to use for this
                 specific subnet.

                   * Disable: The subnet uses the default configuration as
                     defined in the DefaultNtpServersConfigSource and
                     DefaultStaticNtpServers.IpAddress parameters.
                   * Enable: The subnet uses the specific configuration as
                     defined in the following parameters:
                     SpecificNtpServers.ConfigSource,
                     SpecificNtpServers.StaticNtp1,
                     SpecificNtpServers.StaticNtp2,
                     SpecificNtpServers.StaticNtp3, and
                     SpecificNtpServers.StaticNtp4.

                 The configuration is only valid when the
                 SpecificNtpServers.EnableOption parameter is set to 'Enable'.

                 "
   DEFVAL        { disable }
   ::= { specificNtpServersEntry 200 }

  -- Columnar:Enable Option

  specificNtpServersEnableOption OBJECT-TYPE
   SYNTAX        MxEnableState
   MAX-ACCESS    read-write
   STATUS        current
   DESCRIPTION " Enable Option

                 Enables the NTP servers (option 42).
                 "
   DEFVAL        { disable }
   ::= { specificNtpServersEntry 300 }

  -- Columnar:Configuration Source

  specificNtpServersConfigSource OBJECT-TYPE
   SYNTAX        INTEGER { hostConfiguration(200) , automatic(300) , static
                 (400) }
   MAX-ACCESS    read-write
   STATUS        current
   DESCRIPTION " Configuration Source

                 NTP servers specific configuration source for the subnet.

                   * HostConfiguration: The NTP servers are obtained from the
                     host configuration.
                   * Automatic: The NTP servers are automatically obtained
                     from the network configured in the
                     Subnets.AutomaticConfigurationInterface parameter of this
                     subnet.
                   * Static: The NTP servers are specified in the StaticNtp
                     parameters of this table.

                 This configuration overrides the default configuration set in
                 the DefaultNtpServersConfigSource parameter when the
                 SpecificNtpServers.EnableConfig parameter is set to 'Enable'.

                 "
   DEFVAL        { hostConfiguration }
   ::= { specificNtpServersEntry 400 }

  -- Columnar:Static NTP 1

  specificNtpServersStaticNtp1 OBJECT-TYPE
   SYNTAX        MxIpAddr
   MAX-ACCESS    read-write
   STATUS        current
   DESCRIPTION " Static NTP 1

                 IP address of the first NTP server of the subnet. The
                 SpecificNtpServers.ConfigSource parameter must be set to
                 'Static' for this value to be applied.

                 This configuration overrides the default configuration set in
                 the DefaultStaticNtpServers.IpAddress parameter when the
                 SpecificNtpServers.EnableConfig parameter is set to 'Enable'.

                 "
   DEFVAL        { "" }
   ::= { specificNtpServersEntry 500 }

  -- Columnar:Static NTP 2

  specificNtpServersStaticNtp2 OBJECT-TYPE
   SYNTAX        MxIpAddr
   MAX-ACCESS    read-write
   STATUS        current
   DESCRIPTION " Static NTP 2

                 IP address of the second NTP server of the subnet. The
                 SpecificNtpServers.ConfigSource parameter must be set to
                 'Static' for this value to be applied.

                 This configuration overrides the default configuration set in
                 the DefaultStaticNtpServers.IpAddress parameter when the
                 SpecificNtpServers.EnableConfig parameter is set to 'Enable'.

                 "
   DEFVAL        { "" }
   ::= { specificNtpServersEntry 600 }

  -- Columnar:Static NTP 3

  specificNtpServersStaticNtp3 OBJECT-TYPE
   SYNTAX        MxIpAddr
   MAX-ACCESS    read-write
   STATUS        current
   DESCRIPTION " Static NTP 3

                 IP address of the third NTP server of the subnet. The
                 SpecificNtpServers.ConfigSource parameter must be set to
                 'Static' for this value to be applied.

                 This configuration overrides the default configuration set in
                 the DefaultStaticNtpServers.IpAddress parameter when the
                 SpecificNtpServers.EnableConfig parameter is set to 'Enable'.

                 "
   DEFVAL        { "" }
   ::= { specificNtpServersEntry 700 }

  -- Columnar:Static NTP 4

  specificNtpServersStaticNtp4 OBJECT-TYPE
   SYNTAX        MxIpAddr
   MAX-ACCESS    read-write
   STATUS        current
   DESCRIPTION " Static NTP 4

                 IP address of the fourth NTP server of the subnet. The
                 SpecificNtpServers.ConfigSource parameter must be set to
                 'Static' for this value to be applied.

                 This configuration overrides the default configuration set in
                 the DefaultStaticNtpServers.IpAddress parameter when the
                 SpecificNtpServers.EnableConfig parameter is set to 'Enable'.

                 "
   DEFVAL        { "" }
   ::= { specificNtpServersEntry 800 }

 -- End of table:Subnet NTP Servers

 -- ******************************************************************
 
 -- Table:NTP Servers

 -- ******************************************************************
 
 ntpServersInfoTable OBJECT-TYPE
  SYNTAX        SEQUENCE OF NtpServersInfoEntry
  MAX-ACCESS    not-accessible
  STATUS        current
  DESCRIPTION " NTP Servers

                This table contains the active subnets's NTP servers.
                "
  ::= { ntpServersGroup 400 }
  ntpServersInfoEntry OBJECT-TYPE
   SYNTAX        NtpServersInfoEntry
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION " A row in table NTP Servers. "
   INDEX         {
                   ntpServersInfoSubnetName
                 }

   ::= { ntpServersInfoTable 1 }

  NtpServersInfoEntry ::= SEQUENCE
  {
    ntpServersInfoSubnetName OCTET STRING,
    ntpServersInfoNtp1       MxIpAddr,
    ntpServersInfoNtp2       MxIpAddr,
    ntpServersInfoNtp3       MxIpAddr,
    ntpServersInfoNtp4       MxIpAddr
  }

  -- Index:Subnet Name

  ntpServersInfoSubnetName OBJECT-TYPE
   SYNTAX        OCTET STRING
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION " Subnet Name

                 Name of the subnet.
                 "
   ::= { ntpServersInfoEntry 100 }

  -- Columnar:NTP 1

  ntpServersInfoNtp1 OBJECT-TYPE
   SYNTAX        MxIpAddr
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION " NTP 1

                 Indicates the subnets' first NTP server.
                 "
   ::= { ntpServersInfoEntry 200 }

  -- Columnar:NTP 2

  ntpServersInfoNtp2 OBJECT-TYPE
   SYNTAX        MxIpAddr
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION " NTP 2

                 Indicates the subnets' second NTP server.
                 "
   ::= { ntpServersInfoEntry 300 }

  -- Columnar:NTP 3

  ntpServersInfoNtp3 OBJECT-TYPE
   SYNTAX        MxIpAddr
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION " NTP 3

                 Indicates the subnets' third NTP server.
                 "
   ::= { ntpServersInfoEntry 400 }

  -- Columnar:NTP 4

  ntpServersInfoNtp4 OBJECT-TYPE
   SYNTAX        MxIpAddr
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION " NTP 4

                 Indicates the subnets' fourth NTP server.
                 "
   ::= { ntpServersInfoEntry 500 }

 -- End of table:NTP Servers

-- End of group:NTP Servers

-- ****************************************************************************

-- Group:NBNS Servers

-- ****************************************************************************

nbnsServersGroup OBJECT IDENTIFIER
 ::= { dhcpMIBObjects 700 }
 -- ***************************************************************************
 
 -- Table:Static NBNS Servers

 -- ***************************************************************************
 
 defaultStaticNbnsServersTable OBJECT-TYPE
  SYNTAX        SEQUENCE OF DefaultStaticNbnsServersEntry
  MAX-ACCESS    not-accessible
  STATUS        current
  DESCRIPTION " Static NBNS Servers

                This table contains the list of default static NBNS servers
                for all subnets. The NBNS servers are sorted by priority.
                "
  ::= { nbnsServersGroup 100 }
  defaultStaticNbnsServersEntry OBJECT-TYPE
   SYNTAX        DefaultStaticNbnsServersEntry
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION " A row in table Static NBNS Servers. "
   INDEX         {
                   defaultStaticNbnsServersPriority
                 }

   ::= { defaultStaticNbnsServersTable 1 }

  DefaultStaticNbnsServersEntry ::= SEQUENCE
  {
    defaultStaticNbnsServersPriority  Unsigned32,
    defaultStaticNbnsServersIpAddress MxIpAddr
  }

  -- Index:Priority

  defaultStaticNbnsServersPriority OBJECT-TYPE
   SYNTAX        Unsigned32 ( 1..4 )
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION " Priority

                 Priority number of this static NBNS server. The lower the
                 number is, the higher the priority is.
                 "
   ::= { defaultStaticNbnsServersEntry 100 }

  -- Columnar:IP Address

  defaultStaticNbnsServersIpAddress OBJECT-TYPE
   SYNTAX        MxIpAddr
   MAX-ACCESS    read-write
   STATUS        current
   DESCRIPTION " IP Address

                 NBNS server's static IP address.
                 "
   ::= { defaultStaticNbnsServersEntry 200 }

 -- End of table:Static NBNS Servers

 -- ***************************************************************************
 
 -- Table:Subnet NBNS Servers

 -- ***************************************************************************
 
 specificNbnsServersTable OBJECT-TYPE
  SYNTAX        SEQUENCE OF SpecificNbnsServersEntry
  MAX-ACCESS    not-accessible
  STATUS        current
  DESCRIPTION " Subnet NBNS Servers

                This table specifies subnet-specific NBNS servers
                configurations. All subnets use the default configuration
                unless the SpecificNbnsServers.EnableConfig parameter is set
                to 'Enable'.

                The Dhcp.AddSubnet command may be used to add a new subnet to
                the SubnetsTable and to all subnet-specific configuration
                tables.

                "
  ::= { nbnsServersGroup 200 }
  specificNbnsServersEntry OBJECT-TYPE
   SYNTAX        SpecificNbnsServersEntry
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION " A row in table Subnet NBNS Servers. "
   INDEX         {
                   specificNbnsServersSubnetName
                 }

   ::= { specificNbnsServersTable 1 }

  SpecificNbnsServersEntry ::= SEQUENCE
  {
    specificNbnsServersSubnetName   OCTET STRING,
    specificNbnsServersEnableConfig MxEnableState,
    specificNbnsServersEnableOption MxEnableState,
    specificNbnsServersStaticNbns1  MxIpAddr,
    specificNbnsServersStaticNbns2  MxIpAddr,
    specificNbnsServersStaticNbns3  MxIpAddr,
    specificNbnsServersStaticNbns4  MxIpAddr
  }

  -- Index:Subnet Name

  specificNbnsServersSubnetName OBJECT-TYPE
   SYNTAX          OCTET STRING
   MAX-ACCESS      read-only
   STATUS          current
   DESCRIPTION   " Subnet Name

                   Name of the subnet.
                   "
   ::= { specificNbnsServersEntry 100 }

  -- Columnar:Enable

  specificNbnsServersEnableConfig OBJECT-TYPE
   SYNTAX        MxEnableState
   MAX-ACCESS    read-write
   STATUS        current
   DESCRIPTION " Enable

                 Defines the NBNS servers configuration to use for this
                 specific subnet.

                   * Disable: The subnet uses the default configuration as
                     defined in the DefaultStaticNbnsServers.IpAddress
                     parameter.
                   * Enable: The subnet uses the specific configuration as
                     defined in the following parameters:
                     SpecificNbnsServers.StaticNbns1,
                     SpecificNbnsServers.StaticNbns2,
                     SpecificNbnsServers.StaticNbns3, and
                     SpecificNbnsServers.StaticNbns4.

                 The configuration is only valid when the
                 SpecificNbnsServers.EnableOption parameter is set to
                 'Enable'.

                 "
   DEFVAL        { disable }
   ::= { specificNbnsServersEntry 200 }

  -- Columnar:Enable Option

  specificNbnsServersEnableOption OBJECT-TYPE
   SYNTAX        MxEnableState
   MAX-ACCESS    read-write
   STATUS        current
   DESCRIPTION " Enable Option

                 Enables the NBNS servers (option 44).
                 "
   DEFVAL        { disable }
   ::= { specificNbnsServersEntry 300 }

  -- Columnar:Static NBNS 1

  specificNbnsServersStaticNbns1 OBJECT-TYPE
   SYNTAX        MxIpAddr
   MAX-ACCESS    read-write
   STATUS        current
   DESCRIPTION " Static NBNS 1

                 IP address of the first NBNS server of the subnet. The
                 SpecificNbnsServers.ConfigSource parameter must be set to
                 'Static' for this value to be applied.

                 This configuration overrides the default configuration set in
                 the DefaultStaticNbnsServers.IpAddress parameter when the
                 SpecificNbnsServers.EnableConfig parameter is set to
                 'Enable'.

                 "
   DEFVAL        { "" }
   ::= { specificNbnsServersEntry 400 }

  -- Columnar:Static NBNS 2

  specificNbnsServersStaticNbns2 OBJECT-TYPE
   SYNTAX        MxIpAddr
   MAX-ACCESS    read-write
   STATUS        current
   DESCRIPTION " Static NBNS 2

                 IP address of the second NBNS server of the subnet. The
                 SpecificNbnsServers.ConfigSource parameter must be set to
                 'Static' for this value to be applied.

                 This configuration overrides the default configuration set in
                 the DefaultStaticNbnsServers.IpAddress parameter when the
                 SpecificNbnsServers.EnableConfig parameter is set to
                 'Enable'.

                 "
   DEFVAL        { "" }
   ::= { specificNbnsServersEntry 500 }

  -- Columnar:Static NBNS 3

  specificNbnsServersStaticNbns3 OBJECT-TYPE
   SYNTAX        MxIpAddr
   MAX-ACCESS    read-write
   STATUS        current
   DESCRIPTION " Static NBNS 3

                 IP address of the third NBNS server of the subnet. The
                 SpecificNbnsServers.ConfigSource parameter must be set to
                 'Static' for this value to be applied.

                 This configuration overrides the default configuration set in
                 the DefaultStaticNbnsServers.IpAddress parameter when the
                 SpecificNbnsServers.EnableConfig parameter is set to
                 'Enable'.

                 "
   DEFVAL        { "" }
   ::= { specificNbnsServersEntry 600 }

  -- Columnar:Static NBNS 4

  specificNbnsServersStaticNbns4 OBJECT-TYPE
   SYNTAX        MxIpAddr
   MAX-ACCESS    read-write
   STATUS        current
   DESCRIPTION " Static NBNS 4

                 IP address of the fourth NBNS server of the subnet. The
                 SpecificNbnsServers.ConfigSource parameter must be set to
                 'Static' for this value to be applied.

                 This configuration overrides the default configuration set in
                 the DefaultStaticNbnsServers.IpAddress parameter when the
                 SpecificNbnsServers.EnableConfig parameter is set to
                 'Enable'.

                 "
   DEFVAL        { "" }
   ::= { specificNbnsServersEntry 700 }

 -- End of table:Subnet NBNS Servers

 -- ******************************************************************
 
 -- Table:NBNS Servers

 -- ******************************************************************
 
 nbnsServersInfoTable OBJECT-TYPE
  SYNTAX        SEQUENCE OF NbnsServersInfoEntry
  MAX-ACCESS    not-accessible
  STATUS        current
  DESCRIPTION " NBNS Servers

                This table contains the active subnets' NBNS servers.
                "
  ::= { nbnsServersGroup 300 }
  nbnsServersInfoEntry OBJECT-TYPE
   SYNTAX        NbnsServersInfoEntry
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION " A row in table NBNS Servers. "
   INDEX         {
                   nbnsServersInfoSubnetName
                 }

   ::= { nbnsServersInfoTable 1 }

  NbnsServersInfoEntry ::= SEQUENCE
  {
    nbnsServersInfoSubnetName OCTET STRING,
    nbnsServersInfoNbns1      MxIpAddr,
    nbnsServersInfoNbns2      MxIpAddr,
    nbnsServersInfoNbns3      MxIpAddr,
    nbnsServersInfoNbns4      MxIpAddr
  }

  -- Index:Subnet Name

  nbnsServersInfoSubnetName OBJECT-TYPE
   SYNTAX         OCTET STRING
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION  " Subnet Name

                  Name of the subnet.
                  "
   ::= { nbnsServersInfoEntry 100 }

  -- Columnar:NBNS 1

  nbnsServersInfoNbns1 OBJECT-TYPE
   SYNTAX        MxIpAddr
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION " NBNS 1

                 Indicates the subnets' first NBNS server.
                 "
   ::= { nbnsServersInfoEntry 200 }

  -- Columnar:NBNS 2

  nbnsServersInfoNbns2 OBJECT-TYPE
   SYNTAX        MxIpAddr
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION " NBNS 2

                 Indicates the subnets' second NBNS server.
                 "
   ::= { nbnsServersInfoEntry 300 }

  -- Columnar:NBNS 3

  nbnsServersInfoNbns3 OBJECT-TYPE
   SYNTAX        MxIpAddr
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION " NBNS 3

                 Indicates the subnets' third NBNS server.
                 "
   ::= { nbnsServersInfoEntry 400 }

  -- Columnar:NBNS 4

  nbnsServersInfoNbns4 OBJECT-TYPE
   SYNTAX        MxIpAddr
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION " NBNS 4

                 Indicates the subnets' fourth NBNS server.
                 "
   ::= { nbnsServersInfoEntry 500 }

 -- End of table:NBNS Servers

-- End of group:NBNS Servers

-- *****************************************************************************

-- Table:Static Leases

-- *****************************************************************************

staticLeasesTable OBJECT-TYPE
 SYNTAX        SEQUENCE OF StaticLeasesEntry
 MAX-ACCESS    not-accessible
 STATUS        current
 DESCRIPTION " Static Leases

               This table specifies IP addresses that are reserved for specific
               hosts.
               "
 ::= { dhcpMIBObjects 800 }
 staticLeasesEntry OBJECT-TYPE
  SYNTAX        StaticLeasesEntry
  MAX-ACCESS    not-accessible
  STATUS        current
  DESCRIPTION " A row in table Static Leases. "
  INDEX         {
                  staticLeasesMacAddress
                }

  ::= { staticLeasesTable 1 }

 StaticLeasesEntry ::= SEQUENCE
 {
   staticLeasesMacAddress OCTET STRING,
   staticLeasesIpAddress  MxIpAddr,
   staticLeasesDelete     INTEGER
 }

 -- Index:MAC Address

 staticLeasesMacAddress OBJECT-TYPE
  SYNTAX        OCTET STRING
  MAX-ACCESS    read-only
  STATUS        current
  DESCRIPTION " MAC Address

                MAC address of the host.
                "
  ::= { staticLeasesEntry 100 }

 -- Columnar:IP Address

 staticLeasesIpAddress OBJECT-TYPE
  SYNTAX        MxIpAddr
  MAX-ACCESS    read-write
  STATUS        current
  DESCRIPTION " IP Address

                The reserved IP address of the host.
                "
  DEFVAL        { "" }
  ::= { staticLeasesEntry 200 }

 -- Row command:Delete

 staticLeasesDelete OBJECT-TYPE
  SYNTAX        INTEGER { noOp(0), delete(10) }
  MAX-ACCESS    read-write
  STATUS        current
  DESCRIPTION " Delete

                Deletes a static lease from the table.
                "
  DEFVAL        { noOp }
  ::= { staticLeasesEntry 300 }

-- End of table:Static Leases

-- ***************************************************************************

-- Table:Assigned Leases

-- ***************************************************************************

assignedLeasesInfoTable OBJECT-TYPE
 SYNTAX        SEQUENCE OF AssignedLeasesInfoEntry
 MAX-ACCESS    not-accessible
 STATUS        current
 DESCRIPTION " Assigned Leases

               This table lists the IP addresses that are currently assigned.
               "
 ::= { dhcpMIBObjects 900 }
 assignedLeasesInfoEntry OBJECT-TYPE
  SYNTAX        AssignedLeasesInfoEntry
  MAX-ACCESS    not-accessible
  STATUS        current
  DESCRIPTION " A row in table Assigned Leases. "
  INDEX         {
                  assignedLeasesInfoIpAddress
                }

  ::= { assignedLeasesInfoTable 1 }

 AssignedLeasesInfoEntry ::= SEQUENCE
 {
   assignedLeasesInfoIpAddress     MxIpAddr,
   assignedLeasesInfoMacAddress    OCTET STRING,
   assignedLeasesInfoSubnetName    OCTET STRING,
   assignedLeasesInfoLeaseTimeLeft Unsigned32
 }

 -- Index:IP Address

 assignedLeasesInfoIpAddress OBJECT-TYPE
  SYNTAX        MxIpAddr
  MAX-ACCESS    read-only
  STATUS        current
  DESCRIPTION " IP Address

                IP Address of the host.
                "
  ::= { assignedLeasesInfoEntry 100 }

 -- Columnar:MAC Address

 assignedLeasesInfoMacAddress OBJECT-TYPE
  SYNTAX        OCTET STRING
  MAX-ACCESS    read-only
  STATUS        current
  DESCRIPTION " MAC Address

                MAC address of the host.
                "
  ::= { assignedLeasesInfoEntry 200 }

 -- Columnar:Subnet Name

 assignedLeasesInfoSubnetName OBJECT-TYPE
  SYNTAX        OCTET STRING
  MAX-ACCESS    read-only
  STATUS        current
  DESCRIPTION " Subnet Name

                Indicates on which subnet the host is located.
                "
  ::= { assignedLeasesInfoEntry 300 }

 -- Columnar:Lease Time Left

 assignedLeasesInfoLeaseTimeLeft OBJECT-TYPE
  SYNTAX        Unsigned32
  MAX-ACCESS    read-only
  STATUS        current
  DESCRIPTION " Lease Time Left

                Indicates the lease time left in seconds.
                "
  ::= { assignedLeasesInfoEntry 400 }

-- End of table:Assigned Leases

-- ****************************************************************************

-- Group:Provisioning

-- ****************************************************************************

provisioningGroup OBJECT IDENTIFIER
 ::= { dhcpMIBObjects 1000 }
 -- Scalar:DefaultStaticOption66

 defaultStaticOption66 OBJECT-TYPE
  SYNTAX        OCTET STRING ( SIZE(0..120) )
  MAX-ACCESS    read-write
  STATUS        current
  DESCRIPTION " DefaultStaticOption66

                Specifies the static value of Option 66 for all subnets.

                When the parameter is empty, the option is not sent.

                NOTE: Some characters are not allowed: Comma, Double quotes,
                Space or Pound.

                "
  DEFVAL        { "" }
  ::= { provisioningGroup 100 }

 -- Scalar:DefaultStaticOption67

 defaultStaticOption67 OBJECT-TYPE
  SYNTAX        OCTET STRING ( SIZE(0..120) )
  MAX-ACCESS    read-write
  STATUS        current
  DESCRIPTION " DefaultStaticOption67

                Specifies the static value of Option 67 for all subnets.

                When the parameter is empty, the option is not sent.

                NOTE: Some characters are not allowed: Comma, Double quotes,
                Space or Pound.

                "
  DEFVAL        { "" }
  ::= { provisioningGroup 200 }

 -- ***************************************************************************
 
 -- Table:Specific Option 66

 -- ***************************************************************************
 
 specificOption66Table OBJECT-TYPE
  SYNTAX           SEQUENCE OF SpecificOption66Entry
  MAX-ACCESS       not-accessible
  STATUS           current
  DESCRIPTION    " Specific Option 66

                   This table contains the Option 66 for each subnet.
                   "
  ::= { provisioningGroup 1000 }
  specificOption66Entry OBJECT-TYPE
   SYNTAX        SpecificOption66Entry
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION " A row in table Specific Option 66. "
   INDEX         {
                   specificOption66SubnetName
                 }

   ::= { specificOption66Table 1 }

  SpecificOption66Entry ::= SEQUENCE
  {
    specificOption66SubnetName   OCTET STRING,
    specificOption66EnableConfig MxEnableState,
    specificOption66EnableOption MxEnableState,
    specificOption66Value        OCTET STRING
  }

  -- Index:Subnet Name

  specificOption66SubnetName OBJECT-TYPE
   SYNTAX         OCTET STRING
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION  " Subnet Name

                  Name of the subnet.
                  "
   ::= { specificOption66Entry 100 }

  -- Columnar:Enable

  specificOption66EnableConfig OBJECT-TYPE
   SYNTAX        MxEnableState
   MAX-ACCESS    read-write
   STATUS        current
   DESCRIPTION " Enable

                 Defines the Option 66 configuration to use for this specific
                 subnet.

                   * Disable: The subnet uses the default configuration as
                     defined in the DefaultStaticOption66 parameter.
                   * Enable: The subnet uses the specific configuration as
                     defined in the SpecificOption66.Value parameter.

                 The configuration is only valid when the
                 SpecificOption66.EnableOption parameter is set to 'Enable'.

                 "
   DEFVAL        { disable }
   ::= { specificOption66Entry 200 }

  -- Columnar:Enable Option

  specificOption66EnableOption OBJECT-TYPE
   SYNTAX        MxEnableState
   MAX-ACCESS    read-write
   STATUS        current
   DESCRIPTION " Enable Option

                 Enables the option 66 on this subnet.
                 "
   DEFVAL        { disable }
   ::= { specificOption66Entry 300 }

  -- Columnar:Value

  specificOption66Value OBJECT-TYPE
   SYNTAX        OCTET STRING ( SIZE(0..120) )
   MAX-ACCESS    read-write
   STATUS        current
   DESCRIPTION " Value

                 Subnet's Option 66 specific value.

                 This configuration overrides the default configuration set in
                 the DefaultStaticOption66 parameter when the
                 SpecificOption66.EnableConfig parameter is set to 'Enable'.

                 When the parameter is empty, the option is not sent.

                 NOTE: Some characters are not allowed: Comma, Double quotes,
                 Space or Pound.

                 "
   ::= { specificOption66Entry 400 }

 -- End of table:Specific Option 66

 -- ***************************************************************************
 
 -- Table:Specific Option 67

 -- ***************************************************************************
 
 specificOption67Table OBJECT-TYPE
  SYNTAX        SEQUENCE OF SpecificOption67Entry
  MAX-ACCESS    not-accessible
  STATUS        current
  DESCRIPTION " Specific Option 67

                This table contains the Option 67 for each subnet. When empty,
                option 67 is not sent.
                "
  ::= { provisioningGroup 1100 }
  specificOption67Entry OBJECT-TYPE
   SYNTAX        SpecificOption67Entry
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION " A row in table Specific Option 67. "
   INDEX         {
                   specificOption67SubnetName
                 }

   ::= { specificOption67Table 1 }

  SpecificOption67Entry ::= SEQUENCE
  {
    specificOption67SubnetName   OCTET STRING,
    specificOption67EnableConfig MxEnableState,
    specificOption67EnableOption MxEnableState,
    specificOption67Value        OCTET STRING
  }

  -- Index:Subnet Name

  specificOption67SubnetName OBJECT-TYPE
   SYNTAX         OCTET STRING
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION  " Subnet Name

                  Name of the subnet.
                  "
   ::= { specificOption67Entry 100 }

  -- Columnar:Enable

  specificOption67EnableConfig OBJECT-TYPE
   SYNTAX        MxEnableState
   MAX-ACCESS    read-write
   STATUS        current
   DESCRIPTION " Enable

                 Defines the Option 67 configuration to use for this specific
                 subnet.

                   * Disable: The subnet uses the default configuration as
                     defined in the DefaultStaticOption67 parameter.
                   * Enable: The subnet uses the specific configuration as
                     defined in the SpecificOption67.Value parameter.

                 The configuration is only valid when the
                 SpecificOption67.EnableOption parameter is set to 'Enable'.

                 "
   DEFVAL        { disable }
   ::= { specificOption67Entry 200 }

  -- Columnar:Enable Option

  specificOption67EnableOption OBJECT-TYPE
   SYNTAX        MxEnableState
   MAX-ACCESS    read-write
   STATUS        current
   DESCRIPTION " Enable Option

                 Enables the option 67 on this subnet.
                 "
   DEFVAL        { disable }
   ::= { specificOption67Entry 300 }

  -- Columnar:Value

  specificOption67Value OBJECT-TYPE
   SYNTAX        OCTET STRING ( SIZE(0..120) )
   MAX-ACCESS    read-write
   STATUS        current
   DESCRIPTION " Value

                 Subnet's Option 67 specific value.

                 This configuration overrides the default configuration set in
                 the DefaultStaticOption67 parameter when the
                 SpecificOption67.EnableConfig parameter is set to 'Enable'.

                 When the parameter is empty, the option is not sent.

                 NOTE: Some characters are not allowed: Comma, Double quotes,
                 Space or Pound.

                 "
   ::= { specificOption67Entry 400 }

 -- End of table:Specific Option 67

-- End of group:Provisioning

-- ***********************************************************************

-- Group:Statistics

-- ***********************************************************************

statisticsGroup OBJECT IDENTIFIER
        ::= { dhcpMIBObjects 10000 }
        -- ***************************************************************
        
        -- Table:Statistics

        -- ***************************************************************
        
        subnetsStatsTable OBJECT-TYPE
         SYNTAX        SEQUENCE OF SubnetsStatsEntry
         MAX-ACCESS    not-accessible
         STATUS        current
         DESCRIPTION " Statistics

                       This table contains the statistics for each
                       subnet.
                       "
         ::= { statisticsGroup 100 }
         subnetsStatsEntry OBJECT-TYPE
          SYNTAX        SubnetsStatsEntry
          MAX-ACCESS    not-accessible
          STATUS        current
          DESCRIPTION " A row in table Statistics. "
          INDEX         {
                          subnetsStatsSubnetName
                        }

          ::= { subnetsStatsTable 1 }

         SubnetsStatsEntry ::= SEQUENCE
         {
           subnetsStatsSubnetName     OCTET STRING,
           subnetsStatsNumberOfLeases Unsigned32
         }

         -- Index:Subnet Name

         subnetsStatsSubnetName OBJECT-TYPE
          SYNTAX        OCTET STRING
          MAX-ACCESS    read-only
          STATUS        current
          DESCRIPTION " Subnet Name

                        Name of the subnet.
                        "
          ::= { subnetsStatsEntry 100 }

         -- Columnar:Number of Leases

         subnetsStatsNumberOfLeases OBJECT-TYPE
          SYNTAX        Unsigned32
          MAX-ACCESS    read-only
          STATUS        current
          DESCRIPTION " Number of Leases

                        Number of currently assigned leases.
                        "
          ::= { subnetsStatsEntry 200 }

        -- End of table:Statistics

-- End of group:Statistics

-- ****************************************************************************

-- Group:Notification Messages Configuration

-- ****************************************************************************

notificationsGroup OBJECT IDENTIFIER
 ::= { dhcpMIBObjects 60010 }
 -- Scalar:Minimal Severity of Notification

 minSeverity OBJECT-TYPE
  SYNTAX        INTEGER { disable(0) , debug(100) , info(200) , warning(300) ,
                error(400) , critical (500) }
  MAX-ACCESS    read-write
  STATUS        current
  DESCRIPTION " Minimal Severity of Notification

                Sets the minimal severity to issue a notification message
                incoming from this service.

                  * Disable: No notification is issued.
                  * Debug: All notification messages are issued.
                  * Info: Notification messages with a 'Informational' and
                    higher severity are issued.
                  * Warning: Notification messages with a 'Warning' and higher
                    severity are issued.
                  * Error: Notification messages with an 'Error' and higher
                    severity are issued.
                  * Critical: Notification messages with a 'Critical' severity
                    are issued.

                "
  DEFVAL        { warning }
  ::= { notificationsGroup 100 }

-- End of group:Notification Messages Configuration

-- ****************************************************************************

-- Group:Configuration Settings

-- ****************************************************************************

configurationGroup OBJECT IDENTIFIER
 ::= { dhcpMIBObjects 60020 }
 -- Scalar:Need Restart

 needRestartInfo OBJECT-TYPE
  SYNTAX        INTEGER { no(0) , yes(100) }
  MAX-ACCESS    read-only
  STATUS        current
  DESCRIPTION " Need Restart

                Indicates if the service needs to be restarted for the
                configuration to fully take effect.

                  * Yes: Service needs to be restarted.
                  * No: Service does not need to be restarted.

                Services can be restarted by using the
                Scm.ServiceCommands.Restart command.

                "
  ::= { configurationGroup 100 }

-- End of group:Configuration Settings

END