-- **************************************************************************** -- -- Copyright(c) 2005 Mediatrix Telecom, Inc. -- -- NOTICE: -- This document contains information that is confidential and proprietary -- to Mediatrix Telecom, Inc. -- -- Mediatrix Telecom, Inc. reserves all rights to this document as well as -- to the Intellectual Property of the document and the technology and -- know-how that it includes and represents. -- -- This publication cannot be reproduced, neither in whole nor in part in -- any form whatsoever without written prior approval by -- Mediatrix Telecom, Inc. -- -- Mediatrix Telecom, Inc. reserves the right to revise this publication -- and make changes at any time and without the obligation to notify any -- person and/or entity of such revisions and/or changes. -- -- **************************************************************************** -- **************************************************************************** MX-COMDASYS-MIB DEFINITIONS ::= BEGIN IMPORTS mediatrix FROM MX-SMI MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Integer32, Counter32, Gauge32,Counter64, TimeTicks FROM SNMPv2-SMI TEXTUAL-CONVENTION, DisplayString, PhysAddress, TruthValue, RowStatus, TimeStamp, AutonomousType, TestAndIncr FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF snmpTraps FROM SNMPv2-MIB enterprises FROM RFC1155-SMI; comdasysGW MODULE-IDENTITY LAST-UPDATED "2104081000Z" ORGANIZATION "Comdasys AG" CONTACT-INFO "Comdasys AG ruedesheimer straße 7 d - 80686 münchen germany Phone: + 49 (0) 89 - 548 4333 0 Web: http://www.comdasys.com" DESCRIPTION "This MIB describes the parameters of Comdasys products." REVISION "2104081000Z" DESCRIPTION "Creation" ::= { mediatrix 4 } -- **************************************************************************** -- defining the objects -- **************************************************************************** sysinfo OBJECT IDENTIFIER ::= { comdasysGW 1 } admin OBJECT IDENTIFIER ::= { comdasysGW 2 } config OBJECT IDENTIFIER ::= { comdasysGW 3 } firmware OBJECT IDENTIFIER ::= { comdasysGW 4 } performance OBJECT IDENTIFIER ::= { comdasysGW 70 } products OBJECT IDENTIFIER ::= { comdasysGW 90 } -- **************************************************************************** -- defining the sysinfo objects -- **************************************************************************** swVersion OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "Provides the software version of the device. The following is an example of a software version information: 4675.21" ::= { sysinfo 1 } productName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "Provides the product name of the device." ::= { sysinfo 2 } -- **************************************************************************** -- defining the startup config download objects -- **************************************************************************** downloadExecute OBJECT-TYPE SYNTAX INTEGER { noOp (0), downloadConfiguration (1) } ACCESS read-write STATUS mandatory DESCRIPTION "Starts configuration download via FTP. A reload of the device will be necessary in order to apply the new downloaded configuration. 0 noOP 1 downloadConfiguration" ::= { config 1 } downloadFtpServerAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..255)) ACCESS read-write STATUS mandatory DESCRIPTION "Ftp server IP address." ::= { config 2 } downloadFtpServerPort OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-write STATUS current DESCRIPTION "Ftp server IP port number." DEFVAL { 21 } ::= { config 3 } downloadStatus OBJECT-TYPE SYNTAX INTEGER { failed (0), success (1), inProgress (2) } ACCESS read-only STATUS mandatory DESCRIPTION "The status of the configuration file transfer from the FTP server to the device's startup configuration. 0 failed 1 success 2 inProgress" ::= { config 4 } -- **************************************************************************** -- defining the firmware download objects -- **************************************************************************** firmwareLoadExecute OBJECT-TYPE SYNTAX INTEGER { noOp (0), loadFirmware (1) } ACCESS read-write STATUS mandatory DESCRIPTION "Starts firmware download via FTP. 0 noOp 1 loadFirmware" ::= { firmware 1 } firmwareFtpServerAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..255)) ACCESS read-write STATUS mandatory DESCRIPTION "Ftp server IP address." ::= { firmware 2 } firmwareFtpServerPort OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-write STATUS current DESCRIPTION "Ftp server IP port number." DEFVAL { 21 } ::= { firmware 3 } firmwareLoadStatus OBJECT-TYPE SYNTAX INTEGER { failed (0), success (1), inProgress (2) } ACCESS read-only STATUS mandatory DESCRIPTION "The status of the firmware download from the FTP server to the device. 0 failed 1 success 2 inProgress" ::= { firmware 4 } -- **************************************************************************** -- defining the admin objects -- **************************************************************************** deviceRestart OBJECT-TYPE SYNTAX INTEGER { noOp (0), reload (1) } ACCESS read-write STATUS mandatory DESCRIPTION "Force a reload of the device. 0 noOp 1 reload" ::= { admin 1 } daemonNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of DAEMONs present on this system." ::= { admin 2 } daemonTable OBJECT-TYPE SYNTAX SEQUENCE OF DaemonEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of daemon entries. The number of entries is given by the value of daemonNumber." ::= { admin 3 } daemonEntry OBJECT-TYPE SYNTAX DaemonEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A daemon entry containing objects for corresponding to the daemon." INDEX { daemonDescr } ::= { daemonTable 1 } DaemonEntry ::= SEQUENCE { daemonDescr DisplayString, daemonStatus Gauge32, daemonRestart INTEGER } daemonDescr OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "A name of the daemon." ::= { daemonEntry 1 } daemonStatus OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The current daemon status." ::= { daemonEntry 2 } daemonRestart OBJECT-TYPE SYNTAX INTEGER { noOp (0), reload (1) } ACCESS read-write STATUS mandatory DESCRIPTION "Restart the current daemon. 0 noOp 1 reload" ::= { daemonEntry 3 } -- **************************************************************************** -- defining the performance objects -- **************************************************************************** cpu OBJECT IDENTIFIER ::= { performance 10 } memory OBJECT IDENTIFIER ::= { performance 20 } temperature OBJECT IDENTIFIER ::= { performance 30 } -- **************************************************************************** -- defining the CPU objects -- **************************************************************************** cpuNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of CPUs present on this system." ::= { cpu 1 } cpuTable OBJECT-TYPE SYNTAX SEQUENCE OF CpuEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of CPU entries. The number of entries is given by the value of cpuNumber." ::= { cpu 2 } cpuEntry OBJECT-TYPE SYNTAX CpuEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A CPU entry containing objects for corresponding to the CPU." INDEX { cpuDescr } ::= { cpuTable 1 } CpuEntry ::= SEQUENCE { cpuDescr DisplayString, cpuWorkloadCurrent Gauge32, cpuWorkload1MinuteAverage Gauge32, cpuWorkload5MinuteAverage Gauge32 } cpuDescr OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "A name identifying the CPU." ::= { cpuEntry 1 } cpuWorkloadCurrent OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The current CPU workload in percent." ::= { cpuEntry 2 } cpuWorkload1MinuteAverage OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The CPU workload average over the last minute in percent." ::= { cpuEntry 3 } cpuWorkload5MinuteAverage OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The CPU workload average over the last 5 minutes in percent." ::= { cpuEntry 4 } -- **************************************************************************** -- defining the memory objects -- **************************************************************************** memoryPoolNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of memory pools present on this system." ::= { memory 1 } memoryPoolTable OBJECT-TYPE SYNTAX SEQUENCE OF MemoryPoolEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of memory pool entries. The number of entries is given by the value of memoryPoolNumber." ::= { memory 2 } memoryPoolEntry OBJECT-TYPE SYNTAX MemoryPoolEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A memory pool entry containing objects for the corresponding memory pool." INDEX { memDescr } ::= { memoryPoolTable 1 } MemoryPoolEntry ::= SEQUENCE { memDescr DisplayString, memTotalBytes INTEGER, memAllocatedBytes INTEGER, memFreeBytes INTEGER, memLargestFreeBlock INTEGER, memAllocatedBlocks INTEGER, memFreeBlocks INTEGER } memDescr OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "A name identifying the memory pool." ::= { memoryPoolEntry 1 } memTotalBytes OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "The total number of bytes belonging to the memory pool." ::= { memoryPoolEntry 2 } memAllocatedBytes OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The current number of allocated bytes in the memory pool." ::= { memoryPoolEntry 3 } memFreeBytes OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The current number of free bytes in the memory pool." ::= { memoryPoolEntry 4 } memLargestFreeBlock OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The size of the largest available free block." ::= { memoryPoolEntry 5 } memAllocatedBlocks OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The current number of allocated blocks in the memory pool." ::= { memoryPoolEntry 6 } memFreeBlocks OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The current number of free blocks in the memory pool." ::= { memoryPoolEntry 7 } -- **************************************************************************** -- defining the temperature probe objects -- **************************************************************************** tempProbeNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of temperature probes present on this system." ::= { temperature 1 } tempProbeTable OBJECT-TYPE SYNTAX SEQUENCE OF TempProbeEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of temperature probe entries. The number of entries is given by the value of tempProbeNumber." ::= { temperature 2 } tempProbeEntry OBJECT-TYPE SYNTAX TempProbeEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A temperature probe entry containing objects for the corresponding temperature probe." INDEX { tempProbeDescr } ::= { tempProbeTable 1 } TempProbeEntry ::= SEQUENCE { tempProbeDescr DisplayString, currentDegreesCelsius Gauge32 } tempProbeDescr OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "A description for the temperature probe." ::= { tempProbeEntry 1 } currentDegreesCelsius OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The current temperature measured by the temperature probe in degrees celsius." ::= { tempProbeEntry 2 } -- **************************************************************************** -- defining the products objects -- **************************************************************************** convergence-33xx-Biab OBJECT IDENTIFIER ::= { products 100 } convergence-1600 OBJECT IDENTIFIER ::= { products 200 } convergence-2600 OBJECT IDENTIFIER ::= { products 300 } convergence-3600 OBJECT IDENTIFIER ::= { products 400 } convergence-4600 OBJECT IDENTIFIER ::= { products 500 } fmc-2800 OBJECT IDENTIFIER ::= { products 600 } fmc-3800 OBJECT IDENTIFIER ::= { products 700 } fmc-4800 OBJECT IDENTIFIER ::= { products 800 } END