-- **************************************************************************** -- **************************************************************************** -- Copyright(c) 2004 Mediatrix Telecom, Inc. -- NOTICE: -- This document contains information that is confidential and proprietary -- to Mediatrix Telecom, Inc. -- Mediatrix Telecom, Inc. reserves all rights to this document as well as -- to the Intellectual Property of the document and the technology and -- know-how that it includes and represents. -- This publication cannot be reproduced, neither in whole nor in part in -- any form whatsoever without written prior approval by -- Mediatrix Telecom, Inc. -- Mediatrix Telecom, Inc. reserves the right to revise this publication -- and make changes at any time and without the obligation to notify any -- person and/or entity of such revisions and/or changes. -- **************************************************************************** -- **************************************************************************** MX-CLI-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, Integer32 FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF MxEnableState, MxActivationState, MxIpHostName, MxIpAddress, MxIpPort, MxAdvancedIpPort, MxIpSubnetMask, MxDigitMap FROM MX-TC MxUInt64, MxFloat32, MxIpHostNamePort, MxIpAddr, MxIpAddrPort, MxIpAddrMask, MxUri, MxUrl FROM MX-TC2 mediatrixServices FROM MX-SMI2; cliMIB MODULE-IDENTITY LAST-UPDATED "1910210000Z" ORGANIZATION " Mediatrix Telecom, Inc. " CONTACT-INFO " Mediatrix Telecom, Inc. 4229, Garlock Street Sherbrooke (Quebec) Canada Phone: (819) 829-8749 " DESCRIPTION " Command Line Interface The Command Line Interface (CLI) service allows the administrator to manage the unit using the SSH or TELNET protocols. " ::= { mediatrixServices 2700 } cliMIBObjects OBJECT IDENTIFIER ::= { cliMIB 1 } -- Scalar:Inactivity Timeout Delay inactivityTimeOut OBJECT-TYPE SYNTAX Unsigned32 ( 1..90 ) MAX-ACCESS read-write STATUS current DESCRIPTION " Inactivity Timeout Delay Inactivity expiration delay for exiting the CLI session. This value is expressed in minutes. " DEFVAL { 15 } ::= { cliMIBObjects 100 } -- Scalar:Welcome Message welcomeMessage OBJECT-TYPE SYNTAX OCTET STRING ( SIZE(0..1024) ) MAX-ACCESS read-write STATUS current DESCRIPTION " Welcome Message Message displayed when connecting to the CLI. The following escape characters are supported: \\n for new line, \\t for tab and \\\\ for \\ character. Other characters are left unchanged. " DEFVAL { "" } ::= { cliMIBObjects 200 } -- **************************************************************************** -- Group:Telnet Interface -- **************************************************************************** telnetGroup OBJECT IDENTIFIER ::= { cliMIBObjects 1000 } -- Scalar:Enable Telnet enableTelnet OBJECT-TYPE SYNTAX MxEnableState MAX-ACCESS read-write STATUS current DESCRIPTION " Enable Telnet Enable/Disable access to the system by Telnet. " DEFVAL { disable } ::= { telnetGroup 100 } -- Scalar:Listen Port telnetPort OBJECT-TYPE SYNTAX MxIpPort MAX-ACCESS read-write STATUS current DESCRIPTION " Listen Port Port on which the Telnet service should listen for incoming Telnet requests. " DEFVAL { 23 } ::= { telnetGroup 200 } -- End of group:Telnet Interface -- **************************************************************************** -- Group:SSH Interface -- **************************************************************************** sshGroup OBJECT IDENTIFIER ::= { cliMIBObjects 1100 } -- Scalar:Enable SSH enableSsh OBJECT-TYPE SYNTAX MxEnableState MAX-ACCESS read-write STATUS current DESCRIPTION " Enable SSH Enable/Disable access to the system by SSH. " DEFVAL { enable } ::= { sshGroup 100 } -- Scalar:Listen Port sshPort OBJECT-TYPE SYNTAX MxIpPort MAX-ACCESS read-write STATUS current DESCRIPTION " Listen Port Port on which the SSH service should listen for incoming SSH requests. " DEFVAL { 22 } ::= { sshGroup 200 } -- Scalar:SSH Security Level sshSecurityLevel OBJECT-TYPE SYNTAX INTEGER { permissive(100) , standard(200) , mostSecure(300) } MAX-ACCESS read-write STATUS current DESCRIPTION " SSH Security Level Selects the encryption group for the required security level. * Permissive: All available encryption algorithms are allowed. Should be used only if SSH clients cannot connect properly. + cipher: aes256-ctr, aes256-cbc, aes128-ctr, aes128-cbc, 3des-ctr, 3des-cbc + mac: hmac-sha1, hmac-sha2-256 + key exchange: diffie-hellman-group1-sha1, diffie-hellman-group14-sha1, diffie-hellman-group14-sha256, ecdh-sha2-nistp256, ecdh-sha2-nistp384, ecdh-sha2-nistp521, curve25519-sha256@libssh.org * Standard: Good compromise between security and interoperability. Weakest encryption algorithms are excluded. + cipher: aes256-ctr, aes128-ctr + mac: hmac-sha1, hmac-sha2-256 + key exchange: diffie-hellman-group14-sha1, diffie-hellman-group14-sha256, ecdh-sha2-nistp256, ecdh-sha2-nistp384, ecdh-sha2-nistp521, curve25519-sha256@libssh.org * Most Secure: Only the most secure encryption algorithms are included. May not work for some SSH clients. + cipher: aes256-ctr + mac: hmac-sha2-256 + key exchange: ecdh-sha2-nistp256, ecdh-sha2-nistp384, ecdh-sha2-nistp521, curve25519-sha256@libssh.org " DEFVAL { standard } ::= { sshGroup 300 } -- End of group:SSH Interface -- **************************************************************************** -- Group:Notification Messages Configuration -- **************************************************************************** notificationsGroup OBJECT IDENTIFIER ::= { cliMIBObjects 60010 } -- Scalar:Minimal Severity of Notification minSeverity OBJECT-TYPE SYNTAX INTEGER { disable(0) , debug(100) , info(200) , warning(300) , error(400) , critical (500) } MAX-ACCESS read-write STATUS current DESCRIPTION " Minimal Severity of Notification Sets the minimal severity to issue a notification message incoming from this service. * Disable: No notification is issued. * Debug: All notification messages are issued. * Info: Notification messages with a 'Informational' and higher severity are issued. * Warning: Notification messages with a 'Warning' and higher severity are issued. * Error: Notification messages with an 'Error' and higher severity are issued. * Critical: Notification messages with a 'Critical' severity are issued. " DEFVAL { warning } ::= { notificationsGroup 100 } -- End of group:Notification Messages Configuration -- **************************************************************************** -- Group:Configuration Settings -- **************************************************************************** configurationGroup OBJECT IDENTIFIER ::= { cliMIBObjects 60020 } -- Scalar:Need Restart needRestartInfo OBJECT-TYPE SYNTAX INTEGER { no(0) , yes(100) } MAX-ACCESS read-only STATUS current DESCRIPTION " Need Restart Indicates if the service needs to be restarted for the configuration to fully take effect. * Yes: Service needs to be restarted. * No: Service does not need to be restarted. Services can be restarted by using the Scm.ServiceCommands.Restart command. " ::= { configurationGroup 100 } -- End of group:Configuration Settings END