------------------------------------------------------------------------------ -- -- File : sys.mi2 -- Description : -- Version : -- Date : March 3, 2003 -- Copyright : 2003 by maipu (sichuan) communication technology co.,ltd. -- All rights reserved. -- -- $Id: -- ------------------------------------------------------------------------------ ------------------------------------------------------------------------------ MAIPU-VRRP-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Counter32, Gauge32, Integer32, Unsigned32, TimeTicks,IpAddress,Counter64 FROM SNMPv2-SMI TEXTUAL-CONVENTION, TruthValue, MacAddress, RowStatus, DisplayString, DateAndTime FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF mpMgmt FROM MAIPU-SMI ObjectName, ObjectSyntax, NetworkAddress FROM RFC1155-SMI; vrrpMib MODULE-IDENTITY LAST-UPDATED "0703161444Z" ORGANIZATION "四川迈普数据通信股份有限公司, Maipu (Sichuan) Communication Technology Co. LTD." CONTACT-INFO "编 写 人: ??? 联系地址：四川省 成都市 高新区 九兴大道16号 邮 编： 610041 电 话： 传 真： 电子邮件： ????" DESCRIPTION "" ::= { mpMgmt 95 } ------------------------------------------------------------------------------ vrrpNotifications OBJECT IDENTIFIER ::= { vrrpMib 1 } vrrpNewMaster NOTIFICATION-TYPE OBJECTS { vrrpOperVrId, vrrpOperIfName, vrrpOperMasterIpAddr } STATUS current DESCRIPTION "The newMaster trap indicates that the sending agent has transitioned to 'Master' state." ::= { vrrpNotifications 1 } vrrpAuthFail NOTIFICATION-TYPE OBJECTS { vrrpOperVrId, vrrpOperIfName } STATUS current DESCRIPTION "认证失败" ::= { vrrpNotifications 2 } vrrpInconsistentIP NOTIFICATION-TYPE OBJECTS { vrrpOperVrId, vrrpOperIfName, vrrpOperVrIP } STATUS current DESCRIPTION "收到的地址与本地IP不一致，相关收到的IP在描述中给出" ::= { vrrpNotifications 3 } ------------------------------------------------------------------------------ vrrpOperations OBJECT IDENTIFIER ::= { vrrpMib 2 } vrrpNodeVersion OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This value identifies the particular version of the VRRP supported by this node." ::= { vrrpOperations 1 } vrrpNotificationCntl OBJECT-TYPE SYNTAX INTEGER { enabled (1), disabled (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the VRRP-enabled router will generate SNMP traps for events defined in this MIB. 'Enabled' results in SNMP traps; 'disabled', no traps are sent." ::= { vrrpOperations 2 } vrrpTrackTable OBJECT-TYPE SYNTAX SEQUENCE OF VrrpTrackEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Track table for a VRRP router。" ::= { vrrpOperations 3 } vrrpTrackEntry OBJECT-TYPE SYNTAX VrrpTrackEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Track table for a VRRP router。" INDEX { vrrpTrackVrId, vrrpTrackIfName, vrrpTrackObjectName } ::= { vrrpTrackTable 1 } VrrpTrackEntry ::= SEQUENCE { vrrpTrackVrId Integer32, vrrpTrackIfName DisplayString, vrrpTrackObjectName DisplayString, vrrpTrackState INTEGER, vrrpTrackPriDecrement Unsigned32, vrrpTrackRowStatus RowStatus } vrrpTrackVrId OBJECT-TYPE SYNTAX Integer32(1..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object contains the Virtual Router Identifier (VRID)." ::= { vrrpTrackEntry 1 } vrrpTrackIfName OBJECT-TYPE SYNTAX DisplayString(SIZE(0..40)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object contains the interface name where vrrp is configured." ::= { vrrpTrackEntry 2 } vrrpTrackObjectName OBJECT-TYPE SYNTAX DisplayString(SIZE(0..40)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object contains the interface name where vrrp tracked." ::= { vrrpTrackEntry 3 } vrrpTrackState OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current state of the object tracked." ::= { vrrpTrackEntry 4 } vrrpTrackPriDecrement OBJECT-TYPE SYNTAX Unsigned32(1..255) MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the priority to be used for track.vrrp will change its priority when vrrpTrackState changed." ::= { vrrpTrackEntry 5 } vrrpTrackRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status variable, used in accordance to installation and removal conventions for conceptual rows. The rowstatus of a currently active row in the vrrpOperTable is constrained by the operational state of the corresponding virtual router. When `vrrpOperRowStatus' is set to active(1), no other objects in the conceptual row, with the exception of `vrrpOperAdminState', can be modified. Prior to setting the `vrrpOperRowStatus' object from `active' to a different value, the `vrrpOperAdminState' object must be set to `down' and the `vrrpOperState' object be transitioned to `initialize'. To create a row in this table, a manager sets this object to either createAndGo(4) or createAndWait(5). Until instances of all corresponding columns are appropriately configured, the value of the corresponding instance of the `vrrpOperRowStatus' column will be read as notReady(3). In particular, a newly created row cannot be made active(1) until (minimally) the corresponding instance of `vrrpOperVrId' has been set and there is at least one active row in the `vrrpAssoIpAddrTable' defining an associated IP address for the virtual router." ::= { vrrpTrackEntry 6 } vrrpOperTable OBJECT-TYPE SYNTAX SEQUENCE OF VrrpOperEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Operations table for a VRRP router which consists of a sequence (i.e., one or more conceptual rows) of 'vrrpOperEntry' items." ::= { vrrpOperations 4 } vrrpOperEntry OBJECT-TYPE SYNTAX VrrpOperEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Operations table for a VRRP router which consists of a sequence (i.e., one or more conceptual rows) of 'vrrpOperEntry' items." INDEX { vrrpOperVrId, vrrpOperIfName } ::= { vrrpOperTable 1 } VrrpOperEntry ::= SEQUENCE { vrrpOperVrId Integer32, vrrpOperIfName DisplayString, vrrpOperVrIP IpAddress, vrrpOperVirtualMacAddr PhysAddress, vrrpOperState INTEGER, vrrpOperPriority Integer32, vrrpOperMasterIpAddr IpAddress, vrrpOperAuthType INTEGER, vrrpOperAuthKey DisplayString, vrrpOperAdvertisementInterval Integer32, vrrpOperPreemptMode TruthValue, vrrpOperVirtualRouterUpTime TimeStamp, vrrpOperProtocol INTEGER, vrrpOperRowStatus RowStatus } vrrpOperVrId OBJECT-TYPE SYNTAX Integer32(1..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object contains the Virtual Router Identifier (VRID)." ::= { vrrpOperEntry 1 } vrrpOperIfName OBJECT-TYPE SYNTAX DisplayString(SIZE(0..40)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object contains the interface name where vrrp is configured." ::= { vrrpOperEntry 2 } vrrpOperVrIP OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The virtual IP address of the virtual router." ::= { vrrpOperEntry 3 } vrrpOperVirtualMacAddr OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The virtual MAC address of the virtual router. Although this object can be derived from the 'vrrpOperVrId' object, it is defined so that it is easily obtainable by a management application and can be included in VRRP-related SNMP traps." ::= { vrrpOperEntry 4 } vrrpOperState OBJECT-TYPE SYNTAX INTEGER { initialize(1), backup(2), master(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current state of the virtual router. This object has three defined values: - `initialize', which indicates that all the virtual router is waiting for a startup event. - `backup', which indicates the virtual router is monitoring the availability of the master router. - `master', which indicates that the virtual router is forwarding packets for IP addresses that are associated with this router. Setting the `vrrpOperAdminState' object (below) initiates transitions in the value of this object." ::= { vrrpOperEntry 5 } vrrpOperPriority OBJECT-TYPE SYNTAX Integer32(1..254) MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the priority to be used for the virtual router master election process. Higher values imply higher priority. A priority of '0', although not settable, is sent by the master router to indicate that this router has ceased to participate in VRRP and a backup virtual router should transition to become a new master. A priority of 255 is used for the router that owns the associated IP address(es). default is 100." ::= { vrrpOperEntry 6 } vrrpOperMasterIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The master router's real (primary) IP address. This is the IP address listed as the source in VRRP advertisement last received by this virtual router." ::= { vrrpOperEntry 7 } vrrpOperAuthType OBJECT-TYPE SYNTAX INTEGER { noAuthentication(1), simpleTextPassword(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Authentication type used for VRRP protocol exchanges between virtual routers. This value of this object is the same for a given ifIndex. New enumerations to this list can only be added via a new RFC on the standards track. deault is 1." ::= { vrrpOperEntry 8 } vrrpOperAuthKey OBJECT-TYPE SYNTAX DisplayString(SIZE(0..8)) MAX-ACCESS read-create STATUS current DESCRIPTION "The Authentication Key. This object is set according to the value of the 'vrrpOperAuthType' object ('simpleTextPassword' or 'ipAuthenticationHeader'). If the length of the value is less than 16 octets, the agent will left adjust and zero fill to 16 octets. The value of this object is the same for a given ifIndex. When read, vrrpOperAuthKey always returns an Octet String of length zero." ::= { vrrpOperEntry 9 } vrrpOperAdvertisementInterval OBJECT-TYPE SYNTAX Integer32(1..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The time interval, in seconds, between sending advertisement messages. Only the master router sends VRRP advertisements. Default is 3." ::= { vrrpOperEntry 10 } vrrpOperPreemptMode OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Controls whether a higher priority virtual router will preempt a lower priority master. Default is true." ::= { vrrpOperEntry 11 } vrrpOperVirtualRouterUpTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "This is the value of the `sysUpTime' object when this virtual router (i.e., the `vrrpOperState') transitioned out of `initialized'." ::= { vrrpOperEntry 12 } vrrpOperProtocol OBJECT-TYPE SYNTAX INTEGER { ip (1), bridge (2), decnet (3), other (4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The particular protocol being controlled by this Virtual Router. New enumerations to this list can only be added via a new RFC on the standards track." ::= { vrrpOperEntry 13 } vrrpOperRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status variable, used in accordance to installation and removal conventions for conceptual rows. The rowstatus of a currently active row in the vrrpOperTable is constrained by the operational state of the corresponding virtual router. When `vrrpOperRowStatus' is set to active(1), no other objects in the conceptual row, with the exception of `vrrpOperAdminState', can be modified. Prior to setting the `vrrpOperRowStatus' object from `active' to a different value, the `vrrpOperAdminState' object must be set to `down' and the `vrrpOperState' object be transitioned to `initialize'. To create a row in this table, a manager sets this object to either createAndGo(4) or createAndWait(5). Until instances of all corresponding columns are appropriately configured, the value of the corresponding instance of the `vrrpOperRowStatus' column will be read as notReady(3). In particular, a newly created row cannot be made active(1) until (minimally) the corresponding instance of `vrrpOperVrId' has been set and there is at least one active row in the `vrrpAssoIpAddrTable' defining an associated IP address for the virtual router." ::= { vrrpOperEntry 14 } ------------------------------------------------------------------------------ vrrpStatistics OBJECT IDENTIFIER ::= { vrrpMib 3 } vrrpRouterChecksumErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of VRRP packets received with an invalid VRRP checksum value." ::= { vrrpStatistics 1 } vrrpRouterVersionErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of VRRP packets received with an unknown or unsupported version number." ::= { vrrpStatistics 2 } vrrpRouterVrIdErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of VRRP packets received with an invalid VRID for this virtual router." ::= { vrrpStatistics 3 } vrrpRouterStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF VrrpRouterStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of virtual router statistics." ::= { vrrpStatistics 4 } vrrpRouterStatsEntry OBJECT-TYPE SYNTAX VrrpRouterStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of virtual router statistics." INDEX { vrrpStatsVrId, vrrpStatsIfName } ::= { vrrpRouterStatsTable 1 } VrrpRouterStatsEntry ::= SEQUENCE { vrrpStatsVrId Integer32, vrrpStatsIfName DisplayString, vrrpStatsBecomeMaster Counter32, vrrpStatsAdvertiseRcvd Counter32, vrrpStatsAdvertiseIntervalErrors Counter32, vrrpStatsAuthFailures Counter32, vrrpStatsIpTtlErrors Counter32, vrrpStatsPriorityZeroPktsRcvd Counter32, vrrpStatsPriorityZeroPktsSent Counter32, vrrpStatsInvalidTypePktsRcvd Counter32, vrrpStatsInvalidAuthType Counter32, vrrpStatsAuthTypeMismatch Counter32, vrrpStatsPacketLengthErrors Counter32 } vrrpStatsVrId OBJECT-TYPE SYNTAX Integer32(1..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object contains the Virtual Router Identifier (VRID)." ::= { vrrpRouterStatsEntry 1 } vrrpStatsIfName OBJECT-TYPE SYNTAX DisplayString(SIZE(0..40)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { vrrpRouterStatsEntry 2 } vrrpStatsBecomeMaster OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of times that this virtual router's state has transitioned to MASTER." ::= { vrrpRouterStatsEntry 3 } vrrpStatsAdvertiseRcvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of VRRP advertisements received by this virtual router." ::= { vrrpRouterStatsEntry 4 } vrrpStatsAdvertiseIntervalErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of VRRP advertisement packets received for which the advertisement interval is different than the one configured for the local virtual router." ::= { vrrpRouterStatsEntry 5 } vrrpStatsAuthFailures OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of VRRP packets received that do not pass the authentication check." ::= { vrrpRouterStatsEntry 6 } vrrpStatsIpTtlErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of VRRP packets received by the virtual router with IP TTL (Time-To-Live) not equal to 255." ::= { vrrpRouterStatsEntry 7 } vrrpStatsPriorityZeroPktsRcvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of VRRP packets received by the virtual router with a priority of '0'." ::= { vrrpRouterStatsEntry 8 } vrrpStatsPriorityZeroPktsSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of VRRP packets sent by the virtual router with a priority of '0'." ::= { vrrpRouterStatsEntry 9 } vrrpStatsInvalidTypePktsRcvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of VRRP packets received by the virtual router with an invalid value in the 'type' field." ::= { vrrpRouterStatsEntry 10 } vrrpStatsInvalidAuthType OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets received with an unknown authentication type." ::= { vrrpRouterStatsEntry 11 } vrrpStatsAuthTypeMismatch OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets received with 'Auth Type' not equal to the locally configured authentication method (`vrrpOperAuthType')." ::= { vrrpRouterStatsEntry 12 } vrrpStatsPacketLengthErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets received with a packet length less than the length of the VRRP header." ::= { vrrpRouterStatsEntry 13 } ------------------------------------------------------------------------------ vrrpConformance OBJECT IDENTIFIER ::= { vrrpMib 4 } ------------------------------------------------------------------------------ vrrpMIBCompliances OBJECT IDENTIFIER ::= { vrrpConformance 1 } vrrpMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The core compliance statement for all VRRP implementations. 'SETable values are from 1 to 255.'" MODULE -- this module MANDATORY-GROUPS { vrrpOperGroup, vrrpStatsGroup } ::= { vrrpMIBCompliances 1 } ------------------------------------------------------------------------------ vrrpMIBGroups OBJECT IDENTIFIER ::= { vrrpConformance 2 } vrrpOperGroup OBJECT-GROUP OBJECTS { vrrpNodeVersion, vrrpNotificationCntl, vrrpOperVirtualMacAddr, vrrpOperState, vrrpOperPriority, vrrpOperMasterIpAddr, vrrpOperAuthType, vrrpOperAuthKey, vrrpOperAdvertisementInterval, vrrpOperPreemptMode, vrrpOperVirtualRouterUpTime, vrrpOperProtocol, vrrpOperRowStatus -- vrrpAssoIpAddrRowStatus } STATUS current DESCRIPTION "Conformance group for VRRP operations." ::= { vrrpMIBGroups 1 } vrrpStatsGroup OBJECT-GROUP OBJECTS { vrrpRouterChecksumErrors, vrrpRouterVersionErrors, vrrpRouterVrIdErrors, vrrpStatsBecomeMaster, vrrpStatsAdvertiseRcvd, vrrpStatsAdvertiseIntervalErrors, vrrpStatsAuthFailures, vrrpStatsIpTtlErrors, -- vrrpStatsInterfaceErrors, vrrpStatsPriorityZeroPktsRcvd, vrrpStatsPriorityZeroPktsSent, vrrpStatsInvalidAuthType, vrrpStatsAuthTypeMismatch, vrrpStatsPacketLengthErrors } STATUS current DESCRIPTION "Conformance group for VRRP statistics." ::= { vrrpMIBGroups 2 } END ------------------------------------------------------------------------------ -- ============================================================================ -- $Log: mpVrrp.mib,v $ -- Revision 1.1 2010/06/21 11:18:46 liyh -- first commit -- -- -- -- ============================================================================