SWITCH_MIB DEFINITIONS ::= BEGIN -- FILE : SWITCH.MIB file, v 2.01.08 b2JzCg -- ================================================================== IMPORTS mgmt, NetworkAddress, IpAddress, Counter, Gauge, TimeTicks FROM RFC1155-SMI DisplayString FROM RFC1213-MIB TRAP-TYPE FROM RFC-1215 OBJECT-TYPE FROM RFC-1212; -- mgmt OBJECT IDENTIFIER ::= { iso org(3) dod(6) internet(1) mgmt(2) } -- directory OBJECT IDENTIFIER ::= { internet 1 } -- experimental OBJECT IDENTIFIER ::= { internet 3 } -- private OBJECT IDENTIFIER ::= { internet 4 } -- enterprises OBJECT IDENTIFIER ::= { private 1 } MacAddress ::= OCTET STRING (SIZE (6)) -- a 6 octet address in PortList ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'." SYNTAX OCTET STRING BitList ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION " " SYNTAX OCTET STRING -- ======================================================================= private OBJECT IDENTIFIER ::= { 1 3 6 1 4 } enterprises OBJECT IDENTIFIER ::= { 1 3 6 1 4 1 } kti OBJECT IDENTIFIER ::= { 1 3 6 1 4 1 867 } switch OBJECT IDENTIFIER ::= { 1 3 6 1 4 1 867 100} -- ======================================================================= -- Switch Common MIB Definition basicSwitchMgt OBJECT IDENTIFIER ::= { switch 1 } basicPortMgt OBJECT IDENTIFIER ::= { switch 2 } trapMgt OBJECT IDENTIFIER ::= { switch 3 } addrMgt OBJECT IDENTIFIER ::= { switch 4 } statisticMgt OBJECT IDENTIFIER ::= { switch 5 } portMirrorMgt OBJECT IDENTIFIER ::= { switch 6 } virtualLanMgt OBJECT IDENTIFIER ::= { switch 7 } trunkMgt OBJECT IDENTIFIER ::= { switch 8 } spanningTreeMgt OBJECT IDENTIFIER ::= { switch 9 } priorityMgt OBJECT IDENTIFIER ::= { switch 10 } igmpMgt OBJECT IDENTIFIER ::= { switch 11 } dot1xMgt OBJECT IDENTIFIER ::= { switch 12 } macsecMgt OBJECT IDENTIFIER ::= { switch 13 } ratecontrolMgt OBJECT IDENTIFIER ::= { switch 14 } stormcontrolMgt OBJECT IDENTIFIER ::= { switch 15 } loggingMgt OBJECT IDENTIFIER ::= { switch 16 } option82Mgt OBJECT IDENTIFIER ::= { switch 17 } mvrMgt OBJECT IDENTIFIER ::= { switch 18 } ipmacMgt OBJECT IDENTIFIER ::= { switch 19 } aclMgt OBJECT IDENTIFIER ::= { switch 20 } loopbackMgt OBJECT IDENTIFIER ::= { switch 21 } dhcpsnoopMgt OBJECT IDENTIFIER ::= { switch 22 } lldpMgt OBJECT IDENTIFIER ::= { switch 23 } -- ======================================================================= -- 1 ======================================================================= -- (.655.6.5.100.1) -- Switch management, mandatory -- switchSoftwareVersion OBJECT-TYPE SYNTAX DisplayString( SIZE(0..16)) ACCESS read-only STATUS mandatory DESCRIPTION " The current software/firmware version implemented in this device represented in non-zero integer. e.g. 10000 means version 1.00.00" ::= { basicSwitchMgt 2 } switchHwAgingSwitch OBJECT-TYPE SYNTAX INTEGER { enable (1), disable (2) } ACCESS read-write STATUS mandatory DESCRIPTION " Enable the HW aging or not." ::= { basicSwitchMgt 3 } switchAgingTime OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-write STATUS mandatory DESCRIPTION " The timeout period in seconds for aging out dynamically learned forwarding information. 802.1D-1990 recommends a default of 300 seconds. the unit is 1 sec." REFERENCE " IEEE 802.1D-1990: Section 6.7.1.1.3 " ::= { basicSwitchMgt 4 } switchRestartControl OBJECT-TYPE SYNTAX INTEGER { running(1), reset(2), restore(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this object to warmBoot(2) causes the device to restart the application software with current configuration parameters saved in non-volatile memory. Setting this object to coldBoot(3) causes the device to reinitialize configuration parameters in non-volatile memory to default values and restart the application software. When the device is running normally, this variable has a value of running(1)." ::= { basicSwitchMgt 5 } switchPortNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS current DESCRIPTION " The total port number of this switch." ::= { basicSwitchMgt 6 } switchAutoMode OBJECT-TYPE SYNTAX INTEGER { autoDetect(1), autoNegotiation(2) } ACCESS read-write STATUS mandatory DESCRIPTION " AutoDetect(1)/AutoNegotiation(2) of the Auto Mode in this switch." ::= { basicSwitchMgt 9 } switchVlanMode OBJECT-TYPE SYNTAX INTEGER { iVL(1), sVL(2) } ACCESS read-write STATUS mandatory DESCRIPTION "IVL(1)/SVL(2) of the VLAN Mode in this switch." ::= { basicSwitchMgt 10 } -- 2 ======================================================================= -- (.655.6.100.1.2) -- -- Port Management, mandatory -- -- (.655.6.100.1.2.1) -- basic port management -- portTable OBJECT-TYPE SYNTAX SEQUENCE OF PortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " Basic information for each port." ::= { basicPortMgt 1 } portEntry OBJECT-TYPE SYNTAX PortEntry ACCESS not-accessible STATUS mandatory INDEX { portIndex } -- DESCRIPTION -- " Port information entry." ::= { portTable 1 } PortEntry ::= SEQUENCE { portIndex INTEGER, portName DisplayString, portType INTEGER, portLink INTEGER, portAdminEnable INTEGER, portAutoNegotiation INTEGER, portCapabilities BitList, portPartnerCapability BitList, portSpeedDpxStatus INTEGER, portFlowControlConfiguration INTEGER -- portPowerSaving -- INTEGER, -- portTrunkID -- INTEGER, -- portMaximumPacketLength -- INTEGER } portIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " port number, This is defined as ifIndex in the IF-MIB. " ::= { portEntry 1 } portName OBJECT-TYPE SYNTAX DisplayString( SIZE(0..12)) ACCESS read-write STATUS mandatory DESCRIPTION " Name of each port." ::= { portEntry 2 } portType OBJECT-TYPE SYNTAX INTEGER { -- other(1), -- HundredBaseTX(2), -- hundredBaseFX(3) other(1), tx100(2), fx100(3), sx1000(11), lx1000(12), t1000(13), gbic1000(14), fx1000(15) } ACCESS read-only STATUS mandatory DESCRIPTION " The type of each port." ::= { portEntry 3 } portLink OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } ACCESS read-only STATUS mandatory DESCRIPTION " This object indicates the link status of each port is up or down." ::= { portEntry 4 } portAdminEnable OBJECT-TYPE SYNTAX INTEGER { enable (1), disable (2) } ACCESS read-write STATUS mandatory DESCRIPTION " Enable/disable status of the port" ::= { portEntry 5 } -- Port Speed & duplex mode -- portAdminMode OBJECT-TYPE -- SYNTAX INTEGER -- { -- autoNegotiation (1), -- half10M (2), -- full10M (3), -- half100M (4), -- full100M (5) -- } -- ACCESS read-write -- STATUS mandatory -- DESCRIPTION -- " To Control the speed & duplex mode for 10/100Mb ports, -- default = AutoNegotiation (1) -- (1) AutoNegotiation : detect by AN (i.e. AN enable) -- if link partner do not support AN, -- the port is force to half duplex mode. -- (2) 10MHalf : force to 10M bps & half duplex mode -- (3) 10MFull : force to 10M bps & full duplex mode -- (4) 100MHalf : force to 100M bps & half duplex mode -- (5) 100MFull : force to 100M bps & full duplex mode -- (6) 1000MHalf : force to 1000M bps & half duplex mode -- (7) 1000MFull : force to 1000M bps & full duplex mode -- The actual operating speed and duplex of the port -- is given by portSpeedDpxStatus." -- ::= { portEntry 6 } portAutoNegotiation OBJECT-TYPE SYNTAX INTEGER { enable (1), disable (2) } ACCESS read-write STATUS mandatory DESCRIPTION " Enable(1)/disable(2) status of auto negotiation" ::= { portEntry 6 } portCapabilities OBJECT-TYPE SYNTAX BitList MAX-ACCESS read-only STATUS current DESCRIPTION "Port capabilities. { portCap10half(0), portCap10full(1), portCap100half(2), portCap100full(3), portCap1000half(4), portCap1000full(5), reserved6(6), reserved7(7), reserved8(8), reserved9(9), reserved10(10), reserved11(11), reserved12(12), reserved13(13), reserved14(14), portCapFlowCtrl(15) } " ::= { portEntry 7 } portPartnerCapability OBJECT-TYPE SYNTAX BitList MAX-ACCESS read-only STATUS current DESCRIPTION "Port PartnerCapability. { portCap10half(0), portCap10full(1), portCap100half(2), portCap100full(3), portCap1000half(4), portCap1000full(5), reserved6(6), reserved7(7), reserved8(8), reserved9(9), reserved10(10), reserved11(11), reserved12(12), reserved13(13), reserved14(14), portCapFlowCtrl(15) } " ::= { portEntry 8 } portSpeedDpxStatus OBJECT-TYPE SYNTAX INTEGER { half0m(1), halfDuplex10(2), fullDuplex10(3), halfDuplex100(4), fullDuplex100(5), -- halfDuplex1000(6), fullDuplex1000(7) -- full0m(8), } ACCESS read-write STATUS mandatory DESCRIPTION "The operating speed and duplex mode of the switched port. " ::= { portEntry 9 } -- Flow control objects portFlowControlConfiguration OBJECT-TYPE SYNTAX INTEGER { enable (1), disable (2) } ACCESS read-write STATUS mandatory DESCRIPTION " Flow control configuration, " ::= { portEntry 10 } -- portPowerSaving OBJECT-TYPE -- SYNTAX INTEGER -- { -- enable(1), -- disable(2) -- } -- ACCESS read-write -- STATUS mandatory -- DESCRIPTION -- " Enable/disable Power Saving status of the port -- " -- ::= { portEntry 11 } -- portTrunkID OBJECT-TYPE -- SYNTAX INTEGER -- ACCESS read-only -- STATUS current -- DESCRIPTION -- " The trunk to which this port belongs. A value of 0 -- means that this port does not belong to any trunk. -- A value greater than zero means that this port -- belongs to trunk at trunkIndex, defined by the -- corresponding trunkPorts. -- " -- ::= { portEntry 12 } -- portMaximumPacketLength OBJECT-TYPE -- SYNTAX INTEGER -- ACCESS read-write -- STATUS mandatory -- DESCRIPTION -- " Select Maximum Packet Length of the port. The value must is 1518, 1532, 9216, 9600. -- " -- ::= { portEntry 13 } -- (.655.6.100.1.2.2) -- net configuration -- netConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF NetConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " This table contains addressing information relevant to this interface corresponding to IfEntry table. The number of entries is given by the value of ifNumber." ::= { basicPortMgt 2 } netConfigEntry OBJECT-TYPE SYNTAX NetConfigEntry ACCESS not-accessible STATUS mandatory INDEX { netConfigIndex } ::= { netConfigTable 1} NetConfigEntry ::= SEQUENCE { netConfigIndex INTEGER, netConfigOperation INTEGER, netConfigMacAddr MacAddress, netConfigIpAddr IpAddress, netConfigSNetMask IpAddress, netConfigDfGateway IpAddress -- DHCPConfiguration -- INTEGER, -- DHCPRenewRelease -- INTEGER } netConfigIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " This index value uniquely identifies the interface to which this entry is applicable. This is defined as ifIndex in the IF-MIB. " ::= { netConfigEntry 1 } netConfigOperation OBJECT-TYPE SYNTAX INTEGER { ok(1), failure(2) } ACCESS read-only STATUS mandatory DESCRIPTION " This object indicates the operational status of this device. " ::= { netConfigEntry 2 } netConfigMacAddr OBJECT-TYPE SYNTAX MacAddress ACCESS read-only STATUS mandatory DESCRIPTION " The MAC address of the specified interface of the device." ::= { netConfigEntry 3 } netConfigIpAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION " The Internet address of the specified interface of the device." ::= { netConfigEntry 4 } netConfigSNetMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION " The internet address subnet mask of the specified interface of the device." ::= { netConfigEntry 5 } netConfigDfGateway OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION " The default gateway address which the routed packets are delivered to." ::= { netConfigEntry 6 } -- DHCPConfiguration OBJECT-TYPE -- SYNTAX INTEGER { -- enable(1), -- disable(2) -- } -- ACCESS read-write -- STATUS mandatory -- DESCRIPTION -- " Request IP form DHCP Server. " -- ::= { netConfigEntry 7 } -- DHCPRenewRelease OBJECT-TYPE -- SYNTAX INTEGER { -- dhcpEnable(1), -- dhcpDisable(2) -- } -- ACCESS read-write -- STATUS mandatory -- DESCRIPTION -- " Select Renew(3) or Release(4) must is in DHCP Enable mode" -- ::= { netConfigEntry 8 } protectedTable OBJECT-TYPE SYNTAX SEQUENCE OF ProtectedEntry ACCESS not-accessible STATUS mandatory ::= { basicPortMgt 3 } protectedEntry OBJECT-TYPE SYNTAX ProtectedEntry ACCESS not-accessible STATUS mandatory INDEX { protectedenable } ::= { protectedTable 1 } ProtectedEntry ::= SEQUENCE { protectedenable INTEGER } protectedenable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION " A switch to select whether the protected Port is Enable(1) or Disable(2). " ::= { protectedEntry 1 } -- protectedPortTable OBJECT-TYPE SYNTAX SEQUENCE OF ProtectedPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " " ::= { basicPortMgt 4 } protectedPortEntry OBJECT-TYPE SYNTAX ProtectedPortEntry ACCESS not-accessible STATUS mandatory INDEX { protectedindex } ::= { protectedPortTable 1} ProtectedPortEntry ::= SEQUENCE { protectedindex INTEGER, protectedPortenable INTEGER } protectedindex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " " ::= { protectedPortEntry 1 } protectedPortenable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION " A switch to select whether the protected Port of Port is Enable(1) or Disable(2). " ::= { protectedPortEntry 2 } -- 3 ======================================================================= -- (.655.6.100.1.3) -- Trap management, mandatory switchTrapManagerTable OBJECT-TYPE SYNTAX SEQUENCE OF SwitchTrapManagerEntry --1.00.03 ACCESS not-accessible STATUS mandatory DESCRIPTION " This table contains the information needed for sending traps." ::= { trapMgt 1 } switchTrapManagerEntry OBJECT-TYPE SYNTAX SwitchTrapManagerEntry ACCESS not-accessible STATUS mandatory INDEX { switchTrapManagerIndex } ::= { switchTrapManagerTable 1} SwitchTrapManagerEntry ::= SEQUENCE { switchTrapManagerIndex INTEGER, switchTrapManagerIpAddr IpAddress, switchTrapManagerComm DisplayString, switchTrapState INTEGER } switchTrapManagerIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory ::= { switchTrapManagerEntry 1} -- switchTrapManagerMacAddr OBJECT-TYPE -- SYNTAX MacAddress -- ACCESS read-only -- STATUS mandatory -- DESCRIPTION -- " The MAC address of the management station which -- trap is sent to ." -- ::= { switchTrapManagerEntry 2} switchTrapManagerIpAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION " The Internet address of the management station which trap is sent to ." ::= { switchTrapManagerEntry 2} switchTrapManagerComm OBJECT-TYPE SYNTAX DisplayString (SIZE(1..16)) ACCESS read-write STATUS mandatory DESCRIPTION " Community name used for sending the trap to this management station" ::= { switchTrapManagerEntry 3 } switchTrapState OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory ::= { switchTrapManagerEntry 4} -- 4 ======================================================================= -- (.655.6.100.1.4) -- address management, mandatory -- 4 1 ===================================================================== -- port address table ====================================================== -- (.655.6.100.1.4.1) -- addrPortMgt OBJECT IDENTIFIER ::= { addrMgt 1 } -- addrPortTable OBJECT-TYPE -- SYNTAX SEQUENCE OF AddrPortEntry -- ACCESS not-accessible -- STATUS mandatory -- DESCRIPTION -- " Address table for each port." -- ::= { addrPortMgt 1 } -- addrPortEntry OBJECT-TYPE -- SYNTAX AddrPortEntry -- ACCESS not-accessible -- STATUS mandatory -- DESCRIPTION -- " Address table entry for each port." -- INDEX { addrPortIndex } -- ::= { addrPortTable 1 } -- AddrPortEntry ::= -- SEQUENCE { -- addrPortIndex -- INTEGER, -- addrPortLastSrcAddress -- MacAddress -- } -- addrPortIndex OBJECT-TYPE -- SYNTAX INTEGER -- ACCESS read-only -- STATUS mandatory -- DESCRIPTION -- " Port index. -- This is defined as ifIndex in the IF-MIB. -- " -- ::= { addrPortEntry 1 } -- addrPortLastSrcAddress OBJECT-TYPE -- SYNTAX MacAddress -- ACCESS read-only -- STATUS mandatory -- DESCRIPTION -- " The object is the last source address in this port -- " -- ::= { addrPortEntry 2 } -- 4.2 ===================================================================== -- static address table ====================================================== -- (.655.6.100.1.4.2) addrStaticMgt OBJECT IDENTIFIER ::= { addrMgt 2 } addrStaticMaxEntryNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " The max. count of static address table " ::= { addrStaticMgt 1 } addrStaticUsedEntryNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " The used count of address entry. " ::= { addrStaticMgt 3 } addrStaticMessageStatus OBJECT-TYPE SYNTAX INTEGER { ok (1), address_found (23), bad_value (4) } ACCESS read-only STATUS mandatory DESCRIPTION " The last status of static operation: (1) ok (2) address_found : set the same address (3) bad_value : address set error because of address is broadcast address or invalid routing port number. " ::= { addrStaticMgt 4 } -- static table -- addrStaticTable OBJECT-TYPE SYNTAX SEQUENCE OF AddrStaticEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " The table contain information about static entry in the device." ::= { addrStaticMgt 5 } addrStaticEntry OBJECT-TYPE SYNTAX AddrStaticEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " " INDEX { addrStaticIndex } ::= { addrStaticTable 1 } AddrStaticEntry ::= SEQUENCE { addrStaticIndex INTEGER, addrStaticSetAddress OCTET STRING } addrStaticIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " This index value uniquely identifies the address in static table. Value range between 1 and the value of addrStaticMaxAddrNumber. " ::= { addrStaticEntry 1 } addrStaticSetAddress OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION " To set/modify the [static address] [Destination] [Port vid]. [6 bytes]/[4 bytes (portlist)][2 bytes]. If 802.1Q Virtual LAN is disable,vid is always 1. " ::= { addrStaticEntry 2 } -- -- struct { -- byte6 addr;-> MAC address -- All 0: delete -- byte4 port_select_bit; -- -- each bit represent the port's capability -- - 1: routing, !1: not route -- -- The port map for the system (24+2) -- - bit 0 = port 1, bit 1= port 2, ...bit 25= port 26, bit 26=CPU -- } -- dynamic table -- addrdynamicTable OBJECT-TYPE SYNTAX SEQUENCE OF AddrdynamicEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " The table contain information about dynamic entry in the device." ::= { addrMgt 3 } addrdynamicEntry OBJECT-TYPE SYNTAX AddrdynamicEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " " INDEX { addrdynamicIndex } ::= { addrdynamicTable 1 } AddrdynamicEntry ::= SEQUENCE { addrdynamicIndex INTEGER, addrdynamicAddress OCTET STRING } addrdynamicIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " This index value uniquely identifies the address in dynamic table. " ::= { addrdynamicEntry 1 } addrdynamicAddress OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "Display the [dynamic address] [port] [vid]. [6 bytes]/[1 bytes (portnumber)][2 bytes]. " ::= { addrdynamicEntry 2 } -- 5 ====================================================== -- (.655.6.4.1.5) -- port statistic management, mandatory resetMIBCounter OBJECT-TYPE SYNTAX INTEGER { noClear(1), clear(2) } ACCESS read-write STATUS mandatory DESCRIPTION " Clear all MIB counters for all ports to zero " ::= { statisticMgt 1 } statisticPortTable OBJECT-TYPE SYNTAX SEQUENCE OF StatisticPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table that contains information about every port that is associated with this transparent bridge." ::= { statisticMgt 2 } statisticPortEntry OBJECT-TYPE SYNTAX StatisticPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of information for each port of a transparent bridge." INDEX { statisticPort } ::= { statisticPortTable 1 } StatisticPortEntry ::= SEQUENCE { statisticPort INTEGER, statisticPortReceiveGoodUnicastFrameCount Counter, statisticPortReceiveGoodBroadcastFrameCount Counter, statisticPortReceiveGoodMulticastFrameCount Counter, statisticPortReceive8023XMACControl Counter, statisticPortReceiveCRCError Counter, statisticPortReceiveFragment Counter, statisticPortReceiveJabbers Counter, statisticPortReceiveTotalByteCountCount Counter, statisticPortTransmitGoodUnicastFrameCount Counter, statisticPortTransmitGoodBroadcastFrameCount Counter, statisticPortTransmitGoodMulticastFrameCount Counter, statisticPortTransmit8023XMACControl Counter, statisticPortTotalTransmitByteCount Counter } statisticPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " This is defined as ifIndex in the IF-MIB." ::= { statisticPortEntry 1 } -- RX Counter statisticPortReceiveGoodUnicastFrameCount OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " The counter of Good Unicast Frame packets received by a port" ::= { statisticPortEntry 2 } statisticPortReceiveGoodBroadcastFrameCount OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " The counter of Good Broadcast Frame packets received by a port" ::= { statisticPortEntry 3 } statisticPortReceiveGoodMulticastFrameCount OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " The counter of Good Multicast Frame packets received by a port" ::= { statisticPortEntry 4 } statisticPortReceive8023XMACControl OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " The counter of 802.3XMACControl Frame packets received by a port" ::= { statisticPortEntry 5 } statisticPortReceiveCRCError OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " The counter of CRCErrors packets received by a port" ::= { statisticPortEntry 6 } statisticPortReceiveFragment OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " The counter of Fragment packets received by a port" ::= { statisticPortEntry 7 } statisticPortReceiveJabbers OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " The counter of Jabbers packets received by a port" ::= { statisticPortEntry 8 } statisticPortReceiveTotalByteCountCount OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " The counter of Total Byte Count received by a port" ::= { statisticPortEntry 9 } -- Tx Counter statisticPortTransmitGoodUnicastFrameCount OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " The counter of Good Unicast Frame Transmit by a port" ::= { statisticPortEntry 10 } statisticPortTransmitGoodBroadcastFrameCount OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " The counter of Good Broadcast Frame Transmit by a port" ::= { statisticPortEntry 11 } statisticPortTransmitGoodMulticastFrameCount OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " The counter of Good Multicast Frame Transmit by a port" ::= { statisticPortEntry 12 } statisticPortTransmit8023XMACControl OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " The counter of 802.3XMACControl Frame Transmit by a port" ::= { statisticPortEntry 13 } statisticPortTotalTransmitByteCount OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " The counter of Total Byte Count Transmit by a port" ::= { statisticPortEntry 14 } -- 6 ====================================================== -- (.655.6.100.1.6) -- Port Moirroring management, optional portMirrorSwitch OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-write STATUS mandatory DESCRIPTION " A state to present whether the port monitor function is ON or OF in the device. The default is OFF. " ::= { portMirrorMgt 1 } mirrorCapturePort OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Destination port for mirrored packets. This is defined as ifIndex in the IF-MIB." ::= { portMirrorMgt 2 } -- Ingress mirrorIngressPort OBJECT-TYPE SYNTAX PortList ACCESS read-write STATUS mandatory DESCRIPTION "Source ports for mirrored ingress packets. " ::= { portMirrorMgt 3 } mirrorIngressFiterRule OBJECT-TYPE SYNTAX INTEGER { all(1), da(2), sa(3) } ACCESS read-write STATUS mandatory DESCRIPTION " all(1): Mirror all ingress frames DA(2): Mirror all received frame with DA=mirrorIngressMAC SA(2): Mirror all received frame with SA=mirrorIngressMAC " ::= { portMirrorMgt 4 } -- mirrorIngressDividerSwitch OBJECT-TYPE -- SYNTAX INTEGER -- { on(1), -- off(2) -- } -- ACCESS read-write -- STATUS mandatory -- DESCRIPTION -- " Ingress divder enable/disable. -- " -- ::= { portMirrorMgt 5 } mirrorIngressDividerCount OBJECT-TYPE SYNTAX INTEGER (1..1023) ACCESS read-write STATUS mandatory DESCRIPTION " Mirror every n received frame (n= mirrorIngressDividerCount) " ::= { portMirrorMgt 6 } mirrorIngressMAC OBJECT-TYPE SYNTAX MacAddress ACCESS read-write STATUS mandatory DESCRIPTION " MAC address that will be compared against ingress frame in accordance with mirrorIngressFiterRule " ::= { portMirrorMgt 7 } -- Egress mirrorEgressPort OBJECT-TYPE SYNTAX PortList ACCESS read-write STATUS mandatory DESCRIPTION "Source ports for mirrored Egress packets. " ::= { portMirrorMgt 8 } mirrorEgressFiterRule OBJECT-TYPE SYNTAX INTEGER { all(1), da(2), sa(3) } ACCESS read-write STATUS mandatory DESCRIPTION " all(1): Mirror all Egress frames DA(2): Mirror all transmitted frame with DA=mirrorEgressMAC SA(2): Mirror all Transmitted frame with SA=mirrorEgressMAC " ::= { portMirrorMgt 9 } -- mirrorEgressDividerSwitch OBJECT-TYPE -- SYNTAX INTEGER -- { on(1), -- off(2) -- } -- ACCESS read-write -- STATUS mandatory -- DESCRIPTION -- " Egress divder enable/disable. -- " -- ::= { portMirrorMgt 10 } mirrorEgressDividerCount OBJECT-TYPE SYNTAX INTEGER (1..1023) ACCESS read-write STATUS mandatory DESCRIPTION " Mirror every n transmitted frame (n= mirrorEgressDividerCount) " ::= { portMirrorMgt 11 } mirrorEgressMAC OBJECT-TYPE SYNTAX MacAddress ACCESS read-write STATUS mandatory DESCRIPTION " MAC address that will be compared against egress frame in accordance with mirrorEgressFiterRule " ::= { portMirrorMgt 12 } -- 7 ====================================================== -- (.655.6.100.1.7) -- virtual LAN management, optional virtualLanSwitch OBJECT-TYPE SYNTAX INTEGER { vlan1q_enable(1), portbased_enable(2), metro_enable(3), disable(4) } ACCESS read-write STATUS mandatory DESCRIPTION " A state to present whether the virtul LAN function is ON or OFF in the device. 1q_enable(1),portbased_enable(2) ,metro_enable(3),disable(4). The default value is OFF. " ::= { virtualLanMgt 1 } virtualLanMaxDomainCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " Max. Virtual LAN domain count in this device " ::= { virtualLanMgt 2 } -- virtualLanMaxMemberCount OBJECT-TYPE -- SYNTAX INTEGER -- ACCESS read-only -- STATUS mandatory -- DESCRIPTION -- " Max. member in a Virtual LAN domain in this device -- " -- ::= { virtualLanMgt 3 } virtualLanPortBasedTable OBJECT-TYPE SYNTAX SEQUENCE OF VirtualLanPortBasedEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " The table contain information for Virtual LAN function." ::= { virtualLanMgt 5 } virtualLanPortBasedEntry OBJECT-TYPE SYNTAX VirtualLanPortBasedEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " Table entry of port monitor." INDEX { virtualLanNameIndex } ::= { virtualLanPortBasedTable 1 } VirtualLanPortBasedEntry ::= SEQUENCE { virtualLanNameIndex INTEGER, virtualLanName DisplayString, virtualLanPortGet PortList, virtualLanPortAdd PortList, virtualLanPortRemove PortList } virtualLanNameIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " VLAN ID, the value range between 1 and the value of virtualLanMaxDomainCount" ::= { virtualLanPortBasedEntry 1 } virtualLanName OBJECT-TYPE SYNTAX DisplayString( SIZE(0..16)) ACCESS read-write STATUS mandatory DESCRIPTION " Domain name" ::= { virtualLanPortBasedEntry 2 } virtualLanPortGet OBJECT-TYPE SYNTAX PortList ACCESS read-only STATUS mandatory DESCRIPTION " Get the ports to belong the given VLAN" ::= { virtualLanPortBasedEntry 3 } -- virtualLanDomainDestroy OBJECT-TYPE -- SYNTAX INTEGER -- { noDestroy(1), -- destroy(2) -- } -- ACCESS read-write -- STATUS mandatory -- DESCRIPTION -- " To reset the domain's VLAN configuration. -- The default VLAN can not be destroy. Ports which do not belong -- to other VLAN are belong to the default VLAN. -- " -- ::= { virtualLanPortBasedEntry 4 } virtualLanPortAdd OBJECT-TYPE SYNTAX PortList ACCESS read-write STATUS mandatory DESCRIPTION " Add ports to the given VLAN" ::= { virtualLanPortBasedEntry 5 } virtualLanPortRemove OBJECT-TYPE SYNTAX PortList ACCESS read-write STATUS mandatory DESCRIPTION " Remove the given ports from the given VLAN" ::= { virtualLanPortBasedEntry 6 } virtualLanPortTable OBJECT-TYPE SYNTAX SEQUENCE OF VirtualLanPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " Table for port configuration in VLAN." ::= { virtualLanMgt 6 } virtualLanPortEntry OBJECT-TYPE SYNTAX VirtualLanPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " Table for port configuration in VLAN." INDEX { virtualLanPortIndex } ::= { virtualLanPortTable 1 } VirtualLanPortEntry ::= SEQUENCE { virtualLanPortIndex INTEGER, -- virtualLanPortMode -- INTEGER, vLanPortPrivatevLantype INTEGER, vLanPortStackRule INTEGER -- vlanPortPVID -- INTEGER } virtualLanPortIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " This is defined as ifIndex in the IF-MIB." ::= { virtualLanPortEntry 1 } -- virtualLanPortMode OBJECT-TYPE -- SYNTAX INTEGER -- { -- access(1), -- dot1qTrunk(2), -- hybrid(3) -- } -- ACCESS read-write -- STATUS mandatory -- DESCRIPTION -- " This variable Setting it to access(1) sets an access link. sets a hybrid link. Setting it to dot1qTrunk(2) sets a trunk link.sets the 802.1Q VLAN mode.Setting it to hybrid(3) " -- ::= { virtualLanPortEntry 2 } vLanPortPrivatevLantype OBJECT-TYPE SYNTAX INTEGER { normal(1), host(2), promiscuous(3) } ACCESS read-write STATUS mandatory DESCRIPTION " The port type defined for Private vlan. " ::= { virtualLanPortEntry 3 } vLanPortStackRule OBJECT-TYPE SYNTAX INTEGER { normal(1), access(2), tunnel(3) } ACCESS read-write STATUS mandatory DESCRIPTION " It sets rule of port in VLAN Stacking. " ::= { virtualLanPortEntry 4 } -- vlanPortPVID OBJECT-TYPE -- SYNTAX INTEGER(1..4096) -- ACCESS read-write -- STATUS mandatory -- DESCRIPTION -- " It sets pvid of port in VLAN. -- " -- ::= { virtualLanPortEntry 5 } -- 8 ====================================================== -- (.655.6.100.1.8) -- Port Trunk management, optional portTrunkSwitch OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-write STATUS mandatory DESCRIPTION " A switch to select whether the power link is ON or OFF. The default is OFF. " ::= { trunkMgt 1 } portTrunkMaxGroupCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " Max. Trunk group count in this device " ::= { trunkMgt 2 } portTrunkMaxPortCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " Max. Trunk port in a group in this device " ::= { trunkMgt 3 } lacpSystemPriority OBJECT-TYPE SYNTAX INTEGER(1..65535) ACCESS read-write STATUS mandatory DESCRIPTION " lacp Port Configuration,A switch to select whether the System Priority. " ::= { trunkMgt 4 } portTrunkGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF PortTrunkGroupEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " " ::= { trunkMgt 5 } portTrunkGroupEntry OBJECT-TYPE SYNTAX PortTrunkGroupEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " Table entry of port Trunk. " INDEX { trunkIndex } ::= { portTrunkGroupTable 1 } PortTrunkGroupEntry ::= SEQUENCE { trunkIndex INTEGER, trunkportselectd INTEGER } trunkIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " The port index of Trunking Group Configuration. " ::= { portTrunkGroupEntry 1 } trunkportselectd OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION " A port belong to which is group ." ::= { portTrunkGroupEntry 2 } lacpPortTable OBJECT-TYPE SYNTAX SEQUENCE OF LacpPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " The table contain information for Port lacp function." ::= { trunkMgt 6 } lacpPortEntry OBJECT-TYPE SYNTAX LacpPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " Table entry of port lacp." INDEX { lacpPortIndex } ::= { lacpPortTable 1 } LacpPortEntry ::= SEQUENCE { lacpPortIndex INTEGER, lacpEnablePort INTEGER } lacpPortIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " lacp port index" ::= { lacpPortEntry 1 } lacpEnablePort OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION " lacp Port Configuration,it select portenable witch is enable or disable. " ::= { lacpPortEntry 2 } -- 9 ====================================================== -- (.655.6.100.1.9) -- spanning tree management, optional spanningTreeConfTable OBJECT-TYPE SYNTAX SEQUENCE OF SpanningTreeConfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " " ::= { spanningTreeMgt 1 } spanningTreeConfEntry OBJECT-TYPE SYNTAX SpanningTreeConfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " " INDEX { spanningTreeSwitch } ::= { spanningTreeConfTable 1 } SpanningTreeConfEntry ::= SEQUENCE { spanningTreeSwitch INTEGER, spanningTreeForceVersion INTEGER, spanningTreeBridgePriority INTEGER } spanningTreeSwitch OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-write STATUS mandatory DESCRIPTION " A switch to select whether the spanning tree is ON or OFF. The default is OFF. If the value is changed, the system will be restarted." ::= { spanningTreeConfEntry 1 } spanningTreeForceVersion OBJECT-TYPE SYNTAX INTEGER { normal(1), stp(2) } ACCESS read-write STATUS mandatory DESCRIPTION " A switch to select whether the Force Version is Normal or Compatible with old STP. The default is Normal. If the value is changed, the system will be restarted." ::= { spanningTreeConfEntry 2 } spanningTreeBridgePriority OBJECT-TYPE SYNTAX INTEGER (0..61440) ACCESS read-write STATUS mandatory DESCRIPTION " A switch to select whether the Bridge Priority. The default is 32768. The value must be in steps of 4096 ." ::= { spanningTreeConfEntry 3 } -- 10 ====================================================== -- (.655.6.100.1.10) -- switch Port Priority management, mandatory prioritySwitch OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-write STATUS mandatory DESCRIPTION " A switch to select whether the priority is enable/disable " ::= { priorityMgt 1 } priorityMode OBJECT-TYPE SYNTAX INTEGER { wrr(1), sp1-wrr(2), sp2-wrr2(3), sp4(4) } ACCESS read-write STATUS mandatory DESCRIPTION " A switch to select whether the priority Mode is Strict/Wrr " ::= { priorityMgt 2 } -- Port based qosConfTable OBJECT-TYPE SYNTAX SEQUENCE OF QosConfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " A Switch set up QoS information for each port." ::= { priorityMgt 3} qosConfEntry OBJECT-TYPE SYNTAX QosConfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " Port priority information entry." INDEX { portPriorityIndex } ::= { qosConfTable 1 } QosConfEntry ::= SEQUENCE { portPriorityIndex INTEGER, portPriorityPortSetting INTEGER, portPriority8021pSetting INTEGER, portPriorityDSCPSetting INTEGER } portPriorityIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " port number, This is defined as ifIndex in the IF-MIB. " ::= { qosConfEntry 1 } portPriorityPortSetting OBJECT-TYPE SYNTAX INTEGER { low(0), medium(1), normal(2), high(3) } ACCESS read-write STATUS mandatory DESCRIPTION " This is PortPriority,0(LOW),1(Normal),2(Medium),3(High) " ::= { qosConfEntry 2 } portPriority8021pSetting OBJECT-TYPE SYNTAX INTEGER { on (1), off (2) } ACCESS read-write STATUS mandatory DESCRIPTION " 802.1p priority setting. " ::= { qosConfEntry 3 } portPriorityDSCPSetting OBJECT-TYPE SYNTAX INTEGER { on (1), off (2) } ACCESS read-write STATUS mandatory DESCRIPTION " DSCP priority setting. " ::= { qosConfEntry 4 } -- Prioritymap priority8021pmapTable OBJECT-TYPE SYNTAX SEQUENCE OF Priority8021pmapEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " A Switch set up QoS Map for the switch." ::= { priorityMgt 4} priority8021pmapEntry OBJECT-TYPE SYNTAX Priority8021pmapEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " Priority information entry." INDEX { map8021ptagIndex } ::= { priority8021pmapTable 1 } Priority8021pmapEntry ::= SEQUENCE { map8021ptagIndex INTEGER, map8021ptagvalue INTEGER, map8021ptagpriority INTEGER } map8021ptagIndex OBJECT-TYPE SYNTAX INTEGER (1..8) ACCESS read-only STATUS mandatory DESCRIPTION " This is the index of Priority tag value" ::= { priority8021pmapEntry 1 } map8021ptagvalue OBJECT-TYPE SYNTAX INTEGER (0..7) ACCESS read-only STATUS mandatory DESCRIPTION " This is Priority tag 0-7" ::= { priority8021pmapEntry 2 } map8021ptagpriority OBJECT-TYPE SYNTAX INTEGER { low(0), medium(1), normal(2), high(3) } ACCESS read-write STATUS mandatory DESCRIPTION " This is to assign priority queue of tag value,00(LOW),01(Normal),02(Medium),03(High) " ::= { priority8021pmapEntry 3 } priorityDSCPmapTable OBJECT-TYPE SYNTAX SEQUENCE OF PriorityDSCPmapEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " A Switch set up QoS Map for the switch." ::= { priorityMgt 5} priorityDSCPmapEntry OBJECT-TYPE SYNTAX PriorityDSCPmapEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " Priority information entry." INDEX { mapDSCPIndex } ::= { priorityDSCPmapTable 1 } PriorityDSCPmapEntry ::= SEQUENCE { mapDSCPIndex INTEGER, mapDSCPValue INTEGER, mapDSCPpriority INTEGER } mapDSCPIndex OBJECT-TYPE SYNTAX INTEGER (1..8) ACCESS read-only STATUS mandatory DESCRIPTION " This is the index DSCP value , index=8 for all others" ::= { priorityDSCPmapEntry 1 } mapDSCPValue OBJECT-TYPE SYNTAX INTEGER (0..63) ACCESS read-write STATUS mandatory DESCRIPTION " This is DSCP value " ::= { priorityDSCPmapEntry 2 } mapDSCPpriority OBJECT-TYPE SYNTAX INTEGER { low(0), normal(1), medium(2), high(3) } ACCESS read-write STATUS mandatory DESCRIPTION " This is to assign priority queue of DSCP value,00(LOW),01(Normal),02(Medium),03(High) " ::= { priorityDSCPmapEntry 3 } -- 11 ====================================================== -- (.655.6.100.1.11) -- igmp snooping management, optional igmpPortTable OBJECT-TYPE SYNTAX SEQUENCE OF IgmpPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " " ::= { igmpMgt 2 } igmpPortEntry OBJECT-TYPE SYNTAX IgmpPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " " INDEX { igmpPortGroupIndex } ::= { igmpPortTable 1 } IgmpPortEntry ::= SEQUENCE { igmpPortGroupIndex INTEGER, igmpRouterPortno INTEGER, igmpLeavePortMode INTEGER, igmpGroupLimitedMaximumGroupNumber INTEGER, igmpFilteringPortProfileEntryName DisplayString } igmpPortGroupIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " " ::= { igmpPortEntry 1 } igmpRouterPortno OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-write STATUS mandatory DESCRIPTION " A switch to select whether the Router Port. " ::= { igmpPortEntry 2 } igmpLeavePortMode OBJECT-TYPE SYNTAX INTEGER { normal(1), immediate(2), fast(3) } ACCESS read-write STATUS mandatory DESCRIPTION " To set leave mode of port. Leave mode: normal(1)/immediate(2)/fast(3). " ::= { igmpPortEntry 3 } igmpGroupLimitedMaximumGroupNumber OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-write STATUS mandatory DESCRIPTION " The maximum group number of port. Range: 0~255." ::= { igmpPortEntry 4 } igmpFilteringPortProfileEntryName OBJECT-TYPE --re consider ( SIZE(0..16)) SYNTAX DisplayString( SIZE(0..8)) ACCESS read-write STATUS mandatory DESCRIPTION " The profile of port. " ::= { igmpPortEntry 5 } -- Multi-Port Group information -- multiPortGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF MultiPortGroupEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " The information for the multicast group which stored in the multi-port table " ::= { igmpMgt 3 } multiPortGroupEntry OBJECT-TYPE SYNTAX MultiPortGroupEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " multi-port information entry." INDEX { multiPortGroupIndex } ::= { multiPortGroupTable 1 } MultiPortGroupEntry ::= SEQUENCE { multiPortGroupIndex INTEGER, multiPortGroupVid INTEGER, multiPortGroupMACAddress IpAddress, multiPortGroupMember PortList } multiPortGroupIndex OBJECT-TYPE SYNTAX INTEGER (1..2) ACCESS read-only STATUS mandatory DESCRIPTION " " ::= { multiPortGroupEntry 1 } multiPortGroupVid OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " " ::= { multiPortGroupEntry 2} multiPortGroupMACAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION " " ::= { multiPortGroupEntry 3} multiPortGroupMember OBJECT-TYPE SYNTAX PortList ACCESS read-only STATUS mandatory DESCRIPTION " The port number belong to the multicast group " ::= { multiPortGroupEntry 4 } -- singlePortGroupTable OBJECT-TYPE -- SYNTAX SEQUENCE OF SinglePortGroupEntry -- ACCESS not-accessible -- STATUS mandatory -- DESCRIPTION -- " The information for the multicast group which stored in the -- single-port table -- " -- ::= { igmpMgt 4 } -- singlePortGroupEntry OBJECT-TYPE -- SYNTAX SinglePortGroupEntry -- ACCESS not-accessible -- STATUS mandatory -- DESCRIPTION -- " single-port information entry." -- INDEX { singlePortGroupIndex } -- ::= { singlePortGroupTable 1 } -- SinglePortGroupEntry ::= -- SEQUENCE { -- singlePortGroupIndex -- INTEGER -- } -- singlePortGroupIndex OBJECT-TYPE -- SYNTAX INTEGER -- ACCESS read-only -- STATUS mandatory -- DESCRIPTION -- " " -- ::= { singlePortGroupEntry 1 } igmpFilteringProfileTable OBJECT-TYPE SYNTAX SEQUENCE OF IgmpFilteringProfileEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " Profile Setup." ::= { igmpMgt 6 } igmpFilteringProfileEntry OBJECT-TYPE SYNTAX IgmpFilteringProfileEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " " INDEX { igmpFilteringProfileindex } ::= { igmpFilteringProfileTable 1 } IgmpFilteringProfileEntry ::= SEQUENCE { igmpFilteringProfileindex INTEGER, igmpFilteringProfileShowProfileEntry DisplayString } igmpFilteringProfileindex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " " ::= { igmpFilteringProfileEntry 1 } igmpFilteringProfileShowProfileEntry OBJECT-TYPE SYNTAX DisplayString( SIZE(0..60)) ACCESS read-only STATUS mandatory DESCRIPTION " To show profile entry. Format:profileEntryName" ::= { igmpFilteringProfileEntry 2 } igmpFilteringRuleTable OBJECT-TYPE SYNTAX SEQUENCE OF IgmpFilteringRuleEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " Rule Setup." ::= { igmpMgt 7 } igmpFilteringRuleEntry OBJECT-TYPE SYNTAX IgmpFilteringRuleEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " " INDEX { igmpFilteringRuleindex } ::= { igmpFilteringRuleTable 1 } IgmpFilteringRuleEntry ::= SEQUENCE { igmpFilteringRuleindex INTEGER, igmpFilteringRuleShowRuleEntry DisplayString } igmpFilteringRuleindex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " " ::= { igmpFilteringRuleEntry 1 } igmpFilteringRuleShowRuleEntry OBJECT-TYPE SYNTAX DisplayString( SIZE(0..60)) ACCESS read-only STATUS mandatory DESCRIPTION " To show rule entry. Format:profileEntryName,startAddress,endAddress" ::= { igmpFilteringRuleEntry 2 } igmpSwitch OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-write STATUS mandatory DESCRIPTION " A switch to select whether the igmp snooping is enable/disable Port Mirroring should be disable when set igmp enable. " ::= { igmpMgt 201 } igmpQuerying OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-write STATUS mandatory DESCRIPTION " A switch to select whether the igmp igmp Querying. " ::= { igmpMgt 202 } igmpUnregisteredIPMCFlooding OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-write STATUS mandatory DESCRIPTION " A switch to select whether the igmp Unregistered IPMC Flooding. " ::= { igmpMgt 203 } igmpQueryInterval OBJECT-TYPE SYNTAX INTEGER(60..125) ACCESS read-write STATUS mandatory DESCRIPTION " A switch to select whether the igmp Query Interval(60-125). " ::= { igmpMgt 204 } igmpReportDelay OBJECT-TYPE SYNTAX INTEGER(5..25) ACCESS read-write STATUS mandatory DESCRIPTION " A switch to select whether the igmp Report Delay(5-25). " ::= { igmpMgt 205 } igmpQueryTimeout OBJECT-TYPE SYNTAX INTEGER(255..500) ACCESS read-write STATUS mandatory DESCRIPTION " A switch to select whether the igmp Query Timeout(255-500). " ::= { igmpMgt 206 } igmpFilteringEnabled OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-write STATUS mandatory DESCRIPTION " A state to present whether the igmp filtering function is ON or OFF in the device. The default value is OFF. " ::= { igmpMgt 207 } igmpGroupLimitedPortEnabled_map OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-create STATUS current DESCRIPTION " A switch to enable/disable group limited of ports. " ::= { igmpMgt 208 } igmpFilteringProfileAddEntry OBJECT-TYPE SYNTAX DisplayString( SIZE(0..60)) ACCESS read-write STATUS mandatory DESCRIPTION " To add entry. Format:profileEntryName,startAddress,endAddress Example:abc,225.0.0.0,238.0.0.1 NOTE:Please don't use space or ',' for profile naming." ::= { igmpMgt 211 } igmpFilteringProfileDeleteProfileEntry OBJECT-TYPE SYNTAX DisplayString( SIZE(0..60)) ACCESS read-write STATUS mandatory DESCRIPTION " To delete profile entry. Format:profileEntryName Example:abc" ::= { igmpMgt 212 } igmpFilteringProfileDeleteRuleEntry OBJECT-TYPE SYNTAX DisplayString( SIZE(0..60)) ACCESS read-write STATUS mandatory DESCRIPTION " To delete rule entry. Format:profileEntryName,startAddress,endAddress Example:abc,225.0.0.0,238.0.0.1" ::= { igmpMgt 213 } igmpFilteringProfileProfileEntryCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " The number of profile entry." ::= { igmpMgt 214 } igmpFilteringProfileRuleEntryCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " The number of rule entry." ::= { igmpMgt 215 } -- 12 ====================================================== -- (.655.6.100.1.12) -- switch 802.1x management, mandatory dot1xEnabled OBJECT-TYPE SYNTAX INTEGER { port_based(1), mac_based(2), disable(3), transparent(4) } ACCESS read-write STATUS mandatory DESCRIPTION " A switch to select whether the 802.1x is port_based(1)/mac_based(2)/disable(3)/transparent(4) " ::= { dot1xMgt 1 } reAuthEnabled OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2), } ACCESS read-write STATUS mandatory DESCRIPTION " A switch to select whether the re-authentication function is enable/disable " ::= { dot1xMgt 2 } reAuthPeriod OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION " A switch to select the period of re-authentication function. ((0..65535) seconds ) " ::= { dot1xMgt 3 } reAuthMax OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION " A switch to select the maximun retry times of re-authentication function. (0-10) " ::= { dot1xMgt 4 } maxReqCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION " The number that the authenticator retires on server timeouts before it declares authentication failure. (0-10) " ::= { dot1xMgt 5 } serverTimeout OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION " The timeout after an access-request is sent to the server before backend state machine retries. ((0..65535) seconds ) " ::= { dot1xMgt 6 } suppTimeout OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION " The timeout after an EAPOL authentication-request is sent to supplicant before backend state machine retries. ((0..65535) seconds ) " ::= { dot1xMgt 7 } quietPeriod OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION " The timeout after a failure before authenticator re-tries to authenticate a supplicant. ((0..65535) seconds ) " ::= { dot1xMgt 8 } txPeriod OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION " The timeout after an EAPOL identify-request is sent to supplicant before authenticator state machine retries. ((0..65535) seconds ) " ::= { dot1xMgt 9 } -- radiusServerIp OBJECT-TYPE -- SYNTAX DisplayString(SIZE(0..16)) -- ACCESS read-write -- STATUS mandatory -- DESCRIPTION -- " The IP address of the radius server. -- " -- ::= { dot1xMgt 10 } -- -- securityKey OBJECT-TYPE -- SYNTAX DisplayString(SIZE(0..32)) -- ACCESS read-write -- STATUS mandatory -- DESCRIPTION -- " The key in calculating MD5 encryption for enconding/deconding the Mesage-Authenticator in RADIUS packets. -- " -- ::= { dot1xMgt 11 } -- -- radiusServerPort OBJECT-TYPE -- SYNTAX INTEGER(1..65536) -- ACCESS read-write -- STATUS mandatory -- DESCRIPTION -- " The port of radius server. It is rang between 1 and 65535. -- " -- ::= { dot1xMgt 12 } -- radiusServerACCOUNTPort OBJECT-TYPE -- SYNTAX INTEGER -- ACCESS read-only -- STATUS mandatory -- DESCRIPTION -- " The ACCOUNT port of radius server. -- " -- ::= { dot1xMgt 13 } dot1xguestvlan OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } ACCESS read-write STATUS mandatory DESCRIPTION " It selects guest vlan vid or disable(0). " ::= { dot1xMgt 14 } dot1xdynamicvlan OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION " It selects dynamic vlan enable or disable. " ::= { dot1xMgt 15 } -- port authentication mode. -- portAuthModeTable OBJECT-TYPE SYNTAX SEQUENCE OF PortAuthModeEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " The authentication mode of port in 802.1x." ::= { dot1xMgt 16 } portAuthModeEntry OBJECT-TYPE SYNTAX PortAuthModeEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " For 802.1p frame, mapping the 802.1p pri[2:0] (priority tag) to the priority queue of the system. " INDEX { portDot1xIndex } ::= { portAuthModeTable 1 } PortAuthModeEntry ::= SEQUENCE { portDot1xIndex INTEGER, portAuthMode INTEGER } portDot1xIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " This is defined as ifIndex in the IF-MIB. " ::= { portAuthModeEntry 1 } portAuthMode OBJECT-TYPE SYNTAX INTEGER { forceUnauthorized (1), forceAuthorized (2), auto (3), none (4) } ACCESS read-write STATUS mandatory DESCRIPTION " The authentocation mode of port. 1.ForceUnauthorized, 2.ForceAuthorized, 3.Auto, 4.None" ::= { portAuthModeEntry 2 } -- mac based macBasedStateTable OBJECT-TYPE SYNTAX SEQUENCE OF MacBasedStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Show mac-based 802.1x authenticator state." ::= { dot1xMgt 17 } macBasedStateEntry OBJECT-TYPE SYNTAX MacBasedStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " " INDEX { macBasedStateIndex } ::= { macBasedStateTable 1 } MacBasedStateEntry ::= SEQUENCE { macBasedStateIndex INTEGER, authVid INTEGER, authMac MacAddress, authPort INTEGER } macBasedStateIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " Mac based state index." ::= { macBasedStateEntry 1 } authVid OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The vid of Authenticator." ::= { macBasedStateEntry 2 } authMac OBJECT-TYPE SYNTAX MacAddress ACCESS read-only STATUS mandatory DESCRIPTION "The mac address of Authenticator." ::= { macBasedStateEntry 3 } authPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The port of Authenticator." ::= { macBasedStateEntry 4 } -- 2 radius server standbyRadiusServerTable OBJECT-TYPE SYNTAX SEQUENCE OF StandbyRadiusServerEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Radius server configuration." ::= { dot1xMgt 20 } standbyRadiusServerEntry OBJECT-TYPE SYNTAX StandbyRadiusServerEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " " INDEX { standbyRadiusServerIndex } ::= { standbyRadiusServerTable 1 } StandbyRadiusServerEntry ::= SEQUENCE { standbyRadiusServerIndex INTEGER, standbyRadiusServerActive INTEGER, standbyRadiusServerIp DisplayString, standbyRadiusServerAuthPort INTEGER, standbyRadiusServerSecurityKey DisplayString, standbyRadiusServerRunning INTEGER } standbyRadiusServerIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " Radius server index." ::= { standbyRadiusServerEntry 1 } standbyRadiusServerActive OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-write STATUS mandatory DESCRIPTION " A switch to select whether the radius server active is Yes(1)/No(2)." ::= { standbyRadiusServerEntry 2 } standbyRadiusServerIp OBJECT-TYPE SYNTAX DisplayString(SIZE(0..16)) ACCESS read-write STATUS mandatory DESCRIPTION " The IP address of the radius server." ::= { standbyRadiusServerEntry 3 } standbyRadiusServerAuthPort OBJECT-TYPE SYNTAX INTEGER(1..65536) ACCESS read-write STATUS mandatory DESCRIPTION " The port of radius server. It is between 1 and 65535." ::= { standbyRadiusServerEntry 4 } standbyRadiusServerSecurityKey OBJECT-TYPE SYNTAX DisplayString(SIZE(0..32)) ACCESS read-write STATUS mandatory DESCRIPTION " The key in calculating MD5 encryption for enconding/deconding the Mesage-Authenticator in RADIUS packets." ::= { standbyRadiusServerEntry 5 } standbyRadiusServerRunning OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION " The running state of radius server. Running state: Yes(1)/No(2)." ::= { standbyRadiusServerEntry 6 } -- mac based revoke macBasedReauthPort OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-create STATUS current DESCRIPTION "Reauthenticate ethernet port(s)." ::= { dot1xMgt 231 } macBasedReauthMac OBJECT-TYPE SYNTAX MacAddress ACCESS read-write STATUS mandatory DESCRIPTION "Reauthenticate MAC address." ::= { dot1xMgt 232 } aaaLogin OBJECT-TYPE SYNTAX INTEGER { local(1), radius(2), local_radius(3) } ACCESS read-write STATUS mandatory DESCRIPTION " A switch to define login authentication method/precedence is local(1)/radius(2)/local_radius(3). " ::= { dot1xMgt 233 } -- 13 ====================================================== -- (.655.6.100.1.13) -- switch MAC Security management, mandatory --macsecMgt macsecEnabled OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2), } ACCESS read-write STATUS mandatory DESCRIPTION " A switch to select whether the MAC security is enable/disable " ::= { macsecMgt 1 } macsecModeTable OBJECT-TYPE SYNTAX SEQUENCE OF MacsecModeEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " The security mode of port in MAC Security." ::= { macsecMgt 2 } macsecModeEntry OBJECT-TYPE SYNTAX MacsecModeEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " The MAC Security Mode Entry. " INDEX { portmacsecIndex } ::= { macsecModeTable 1 } MacsecModeEntry ::= SEQUENCE { portmacsecIndex INTEGER, portmacsecMode INTEGER, portmaxmacno INTEGER, portlearnmacno INTEGER } portmacsecIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " This is defined as ifIndex in the IF-MIB. " ::= { macsecModeEntry 1 } portmacsecMode OBJECT-TYPE SYNTAX INTEGER { nosecurity (1), statichithaccept (2), limitbymacno(3) } ACCESS read-write STATUS mandatory DESCRIPTION " The security mode of port. 1.NoSecurity 2.STATICWITHACCEPT 3.LIMITBYMACNO" ::= { macsecModeEntry 2 } portmaxmacno OBJECT-TYPE SYNTAX INTEGER(0..8192) ACCESS read-write STATUS mandatory DESCRIPTION " The max mac number of port. The value is rang 0 and 8192." ::= { macsecModeEntry 3 } portlearnmacno OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " The learned mac number of port." ::= { macsecModeEntry 4 } -- 14 =============================================================== -- (.4413.1.1.1.12) -- rate control Management. ingressEgressRateControl OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2), } ACCESS read-write STATUS mandatory DESCRIPTION " A switch to select Packet Drop for ingress Limit whether the is enable/disable. " ::= { ratecontrolMgt 1 } -- ingress Rate Control rcIngressPortTable OBJECT-TYPE SYNTAX SEQUENCE OF RcIngressPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " The information for Ingress Rate Control of per port. " ::= { ratecontrolMgt 2 } rcIngressPortEntry OBJECT-TYPE SYNTAX RcIngressPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " Ingress Rate Control information entry." INDEX { rcIngressPortIndex } ::= { rcIngressPortTable 1 } RcIngressPortEntry ::= SEQUENCE { rcIngressPortIndex INTEGER, rcIngressCount INTEGER, rcIngressUnit INTEGER , rcIngressRate INTEGER } rcIngressPortIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " " ::= { rcIngressPortEntry 1 } rcIngressCount OBJECT-TYPE SYNTAX INTEGER (0..1000) ACCESS read-write STATUS mandatory DESCRIPTION " A switch to select Ingress Count whether it is between 0 and 1000. When it is 0 ,No limit. " ::= { rcIngressPortEntry 2 } rcIngressUnit OBJECT-TYPE SYNTAX INTEGER { bpsM(1), bpsk(2), } ACCESS read-write STATUS mandatory DESCRIPTION "A switch to select Ingress Unit whether it is 1=1Mbps/2=62.5kbps " ::= { rcIngressPortEntry 3 } rcIngressRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The Ingress rate is unit*count kbps. No limite ,when the value is 0. " ::= { rcIngressPortEntry 4 } -- Egress Rate Control rcEgressPortTable OBJECT-TYPE SYNTAX SEQUENCE OF RcEgressPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " The information for Egress Rate Control of per port. " ::= { ratecontrolMgt 3 } rcEgressPortEntry OBJECT-TYPE SYNTAX RcEgressPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " Engress Rate Control information entry." INDEX { rcEgressPortIndex } ::= { rcEgressPortTable 1 } RcEgressPortEntry ::= SEQUENCE { rcEgressPortIndex INTEGER, rcEgressCount INTEGER, rcEgressUnit INTEGER, rcEgressRate INTEGER } rcEgressPortIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " " ::= { rcEgressPortEntry 1 } rcEgressCount OBJECT-TYPE SYNTAX INTEGER (0..1000) ACCESS read-write STATUS mandatory DESCRIPTION " A switch to select Egress Count whether it is between 0 and 1000. When it is 0 ,No limit. " ::= { rcEgressPortEntry 2 } rcEgressUnit OBJECT-TYPE SYNTAX INTEGER { bpsM(1), bpsk(2), } ACCESS read-write STATUS mandatory DESCRIPTION " A switch to select Egress Unit whether it is 1=1Mbps/2=62.5kbps " ::= { rcEgressPortEntry 3 } rcEgressRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " The Egress rate is unit*count kbps. No limite ,when the value is 0. " ::= { rcEgressPortEntry 4 } -- 15 =============================================================== -- (.4413.1.1.1.15) -- Storm Control Management. confbyportTable OBJECT-TYPE SYNTAX SEQUENCE OF ConfbyportEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " " ::= { stormcontrolMgt 2 } confbyportEntry OBJECT-TYPE SYNTAX ConfbyportEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " " INDEX { portindex } ::= { confbyportTable 1 } ConfbyportEntry ::= SEQUENCE { portindex INTEGER, broadcastbyport INTEGER, multicastbyport INTEGER, floodingbyport INTEGER } portindex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " The port index of Storm Control. " ::= { confbyportEntry 1 } broadcastbyport OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-write STATUS mandatory DESCRIPTION " A switch to select on/off of Broadcast Control by port. " ::= { confbyportEntry 2 } multicastbyport OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-write STATUS mandatory DESCRIPTION " A switch to select on/off of Multicast Control by port. " ::= { confbyportEntry 3 } floodingbyport OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-write STATUS mandatory DESCRIPTION " A switch to select on/off of Flooding Control by port. " ::= { confbyportEntry 4 } scuint OBJECT-TYPE SYNTAX INTEGER { rate_k(1), rate_M(2) } ACCESS read-write STATUS mandatory DESCRIPTION " A switch to select Suppression Unit Rate(1=62.5Kbps/2=1Mbps) of Storm Control. " ::= { stormcontrolMgt 201 } sccount OBJECT-TYPE SYNTAX INTEGER(0..1000) ACCESS read-write STATUS mandatory DESCRIPTION " A switch to select N of Storm Control (Suppression Rate = N*Unit). When it is 0 ,NO limit. " ::= { stormcontrolMgt 202 } -- 16 =============================================================== systemLogEnable OBJECT-TYPE SYNTAX INTEGER { disable(2), enable(1) } ACCESS read-write STATUS mandatory DESCRIPTION " A switch to select whether the System Log Setting is enable/disable" ::= { loggingMgt 1 } systemLogLevel OBJECT-TYPE SYNTAX INTEGER (1..7) ACCESS read-write STATUS mandatory DESCRIPTION " A switch to select whether the System Log Level is (0-7)" ::= { loggingMgt 2 } systemRemotelog OBJECT-TYPE SYNTAX INTEGER { disable(2), enable(1) } ACCESS read-write STATUS mandatory DESCRIPTION " A switch to select whether the System Remote Log Setting is enable/disable. When it is enable,Remote Log Server IP can not be empty" ::= { loggingMgt 3 } systemServerIPTable OBJECT-TYPE SYNTAX SEQUENCE OF SystemServerIPEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " The information for system server ip. " ::= { loggingMgt 4 } systemServerIPEntry OBJECT-TYPE SYNTAX SystemServerIPEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " System log of server ip information entry." INDEX { systemServerIPIndex } ::= { systemServerIPTable 1 } SystemServerIPEntry ::= SEQUENCE { systemServerIPIndex INTEGER, systemServerIP IpAddress } systemServerIPIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " A switch to select the index of System Log Server IP" ::= { systemServerIPEntry 1 } systemServerIP OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION " A switch to specify the System Log Server IP. When the value is null,the Server IP Address is nill." ::= { systemServerIPEntry 2 } -- ================================================================== -- ================================================================== -- 17 ====================================================== -- (.655.6.100.1.17) -- option82 dhcprelaystatus OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-write STATUS mandatory DESCRIPTION " A switch to select whether the dhcp relay status is ON or OFF. The default is OFF." ::= { option82Mgt 1 } option82relaystatus OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-write STATUS mandatory DESCRIPTION " A switch to select whether the dhcp option 82 relay status is ON or OFF. The default is OFF." ::= { option82Mgt 2 } -- dhcpagentoption82mode OBJECT-TYPE -- SYNTAX INTEGER -- { replace(1), -- keep(2), -- drop(3) -- } -- ACCESS read-write -- STATUS mandatory -- DESCRIPTION -- " A switch to select whether the dhcp agent option 82 mode. -- The default is Replace. 1:Replace ,2:Keep ,3:Drop." -- ::= { option82Mgt 3 } addinformationstate OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-write STATUS mandatory DESCRIPTION " A switch to select whether the relay agent ioformation state." ::= { option82Mgt 4 } addinformation OBJECT-TYPE SYNTAX DisplayString( SIZE(0..15)) ACCESS read-write STATUS mandatory DESCRIPTION " Relay Agent ioformation" ::= { option82Mgt 5 } option82serverip OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION " A switch to set up the dhcp server ip address " ::= { option82Mgt 6 } -- 18 ====================================================== -- (.655.6.100.1.17) -- mvrMgt mvrConfTable OBJECT-TYPE SYNTAX SEQUENCE OF MvrConfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " " ::= { mvrMgt 1 } mvrConfEntry OBJECT-TYPE SYNTAX MvrConfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " " INDEX { mvrindex } ::= { mvrConfTable 1 } MvrConfEntry ::= SEQUENCE { mvrindex INTEGER, mvrname DisplayString, mvractive INTEGER, addmvrvid INTEGER, mvrpriority INTEGER, mvrmode INTEGER, mvrsourceport PortList, mvrreceiveport PortList, mvrtag PortList, mvrdelete INTEGER } mvrindex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " The item of Multicast Vlan. " ::= { mvrConfEntry 1 } mvrname OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION " A switch to select Name of Multicast Vlan. " ::= { mvrConfEntry 2 } mvractive OBJECT-TYPE SYNTAX INTEGER { active(1), nactive(2) } ACCESS read-write STATUS mandatory DESCRIPTION " A switch to select active or nactive of Multicast Vlan. " ::= { mvrConfEntry 3 } addmvrvid OBJECT-TYPE SYNTAX INTEGER(2..4094) ACCESS read-write STATUS mandatory DESCRIPTION " A switch to select vid of Multicast Vlan . " ::= { mvrConfEntry 4 } mvrpriority OBJECT-TYPE SYNTAX INTEGER(0..7) ACCESS read-write STATUS mandatory DESCRIPTION " A switch to select 802.1p Priority of Multicast Vlan . " ::= { mvrConfEntry 5 } mvrmode OBJECT-TYPE SYNTAX INTEGER { compatible(1), dynamic(2) } ACCESS read-write STATUS mandatory DESCRIPTION " A switch to select Mode of Multicast Vlan . " ::= { mvrConfEntry 6 } mvrsourceport OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-create STATUS current DESCRIPTION " A switch to select SourcePort of Multicast Vlan. " ::= { mvrConfEntry 7 } mvrreceiveport OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-create STATUS current DESCRIPTION " A switch to select ReceivePort of Multicast Vlan. " ::= { mvrConfEntry 8 } mvrtag OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-create STATUS current DESCRIPTION " A switch to select Tag of Multicast Vlan. " ::= { mvrConfEntry 9 } mvrdelete OBJECT-TYPE SYNTAX INTEGER { action(1), noAction(2) } ACCESS read-write STATUS mandatory DESCRIPTION " A switch to select Mode of Multicast Vlan . " ::= { mvrConfEntry 10 } mvrGroupaddTable OBJECT-TYPE SYNTAX SEQUENCE OF MvrGroupaddEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " " ::= { mvrMgt 2 } mvrGroupaddEntry OBJECT-TYPE SYNTAX MvrGroupaddEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " " INDEX { mvrgroupindex } ::= { mvrGroupaddTable 1 } MvrGroupaddEntry ::= SEQUENCE { mvrgroupindex INTEGER, mvrgroupvid INTEGER, mvrgroupaddname DisplayString, mvrgroupaddIPrange PortList, mvrgroupDeleteEntry DisplayString } mvrgroupindex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " The item of MVR Group VLAN. " ::= { mvrGroupaddEntry 1 } mvrgroupvid OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " A switch to select Vlan id of Multicast Group Vlan. " ::= { mvrGroupaddEntry 2 } mvrgroupaddname OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION " A switch to select Name of Multicast Group Vlan. " ::= { mvrGroupaddEntry 3 } mvrgroupaddIPrange OBJECT-TYPE SYNTAX PortList ACCESS read-write STATUS mandatory DESCRIPTION " A switch to select start ipaddress of Multicast Group Vlan. " ::= { mvrGroupaddEntry 4 } mvrgroupDeleteEntry OBJECT-TYPE SYNTAX DisplayString( SIZE(0..60)) ACCESS read-write STATUS mandatory DESCRIPTION " To delete group entry. Format:vid,groupEntryName Example:100,abc" ::= { mvrGroupaddEntry 5 } mvrGroup1_Table OBJECT-TYPE SYNTAX SEQUENCE OF MvrGroup1_Entry ACCESS not-accessible STATUS mandatory DESCRIPTION " " ::= { mvrMgt 3 } mvrGroup1_Entry OBJECT-TYPE SYNTAX MvrGroup1_Entry ACCESS not-accessible STATUS mandatory DESCRIPTION " " INDEX { mvrgroupindex_1 } ::= { mvrGroup1_Table 1} MvrGroup1_Entry ::= SEQUENCE { mvrgroupindex_1 INTEGER, mvrgroupid_1 INTEGER, mvrgroupname_1 DisplayString, mvrgroupstartip_1 IpAddress, mvrgroupendip_1 IpAddress } mvrgroupindex_1 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " The item of MVR Group VLAN. " ::= { mvrGroup1_Entry 1 } mvrgroupid_1 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " A switch to select Vlan id of Multicast Group Vlan. " ::= { mvrGroup1_Entry 2 } mvrgroupname_1 OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION " A switch to select Name of Multicast Group Vlan. " ::= { mvrGroup1_Entry 3 } mvrgroupstartip_1 OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION " A switch to select start ipaddress of Multicast Group Vlan. " ::= { mvrGroup1_Entry 4 } mvrgroupendip_1 OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION " A switch to select end ipaddress of Multicast Group Vlan. " ::= { mvrGroup1_Entry 5 } mvrGroup2_Table OBJECT-TYPE SYNTAX SEQUENCE OF MvrGroup2_Entry ACCESS not-accessible STATUS mandatory DESCRIPTION " " ::= { mvrMgt 4 } mvrGroup2_Entry OBJECT-TYPE SYNTAX MvrGroup2_Entry ACCESS not-accessible STATUS mandatory DESCRIPTION " " INDEX { mvrgroupindex_2 } ::= { mvrGroup2_Table 1 } MvrGroup2_Entry ::= SEQUENCE { mvrgroupindex_2 INTEGER, mvrgroupid_2 INTEGER, mvrgroupname_2 DisplayString, mvrgroupstartip_2 IpAddress, mvrgroupendip_2 IpAddress } mvrgroupindex_2 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " The item of MVR Group VLAN. " ::= { mvrGroup2_Entry 1 } mvrgroupid_2 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " A switch to select Vlan id of Multicast Group Vlan. " ::= { mvrGroup2_Entry 2 } mvrgroupname_2 OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION " A switch to select Name of Multicast Group Vlan. " ::= { mvrGroup2_Entry 3 } mvrgroupstartip_2 OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION " A switch to select start ipaddress of Multicast Group Vlan. " ::= { mvrGroup2_Entry 4 } mvrgroupendip_2 OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION " A switch to select end ipaddress of Multicast Group Vlan. " ::= { mvrGroup2_Entry 5 } mvrGroup3_Table OBJECT-TYPE SYNTAX SEQUENCE OF MvrGroup3_Entry ACCESS not-accessible STATUS mandatory DESCRIPTION " " ::= { mvrMgt 5 } mvrGroup3_Entry OBJECT-TYPE SYNTAX MvrGroup3_Entry ACCESS not-accessible STATUS mandatory DESCRIPTION " " INDEX { mvrgroupindex_3 } ::= { mvrGroup3_Table 1 } MvrGroup3_Entry ::= SEQUENCE { mvrgroupindex_3 INTEGER, mvrgroupid_3 INTEGER, mvrgroupname_3 DisplayString, mvrgroupstartip_3 IpAddress, mvrgroupendip_3 IpAddress } mvrgroupindex_3 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " The item of MVR Group VLAN. " ::= { mvrGroup3_Entry 1 } mvrgroupid_3 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " A switch to select Vlan id of Multicast Group Vlan. " ::= { mvrGroup3_Entry 2 } mvrgroupname_3 OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION " A switch to select Name of Multicast Group Vlan. " ::= { mvrGroup3_Entry 3 } mvrgroupstartip_3 OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION " A switch to select start ipaddress of Multicast Group Vlan. " ::= { mvrGroup3_Entry 4 } mvrgroupendip_3 OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION " A switch to select end ipaddress of Multicast Group Vlan. " ::= { mvrGroup3_Entry 5 } -- ================================================================== -- ================================================================== -- 19 ====================================================== ipmacConfTable OBJECT-TYPE SYNTAX SEQUENCE OF IpmacConfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " " ::= { ipmacMgt 1 } ipmacConfEntry OBJECT-TYPE SYNTAX IpmacConfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " " INDEX { ipmacindex } ::= { ipmacConfTable 1 } IpmacConfEntry ::= SEQUENCE { ipmacindex INTEGER , ipmacportenable INTEGER } ipmacindex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " " ::= { ipmacConfEntry 1 } ipmacportenable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION " A switch to select Enable/Disable of IP MAC Binding in port. " ::= { ipmacConfEntry 2 } ipmacBindingTable OBJECT-TYPE SYNTAX SEQUENCE OF IpmacBindingEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " " ::= { ipmacMgt 2 } ipmacBindingEntry OBJECT-TYPE SYNTAX IpmacBindingEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " " INDEX { ipmacruleindex } ::= { ipmacBindingTable 1 } IpmacBindingEntry ::= SEQUENCE { ipmacruleindex INTEGER , ipmacruleactive INTEGER , ipmacSrcMac MacAddress, ipmacSrcIP IpAddress, ipmacSrcPort PortList } ipmacruleindex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " " ::= { ipmacBindingEntry 1 } ipmacruleactive OBJECT-TYPE SYNTAX INTEGER { active(1), delete(2) } ACCESS read-write STATUS mandatory DESCRIPTION " A switch to select active/noactive of Address Binding List. " ::= { ipmacBindingEntry 2 } ipmacSrcMac OBJECT-TYPE SYNTAX MacAddress ACCESS read-write STATUS mandatory DESCRIPTION " A switch to select Source MAC Address of Address Binding List. " ::= { ipmacBindingEntry 3 } ipmacSrcIP OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION " A switch to select Source IP Address of Address Binding List. " ::= { ipmacBindingEntry 4 } ipmacSrcPort OBJECT-TYPE SYNTAX PortList ACCESS read-write STATUS mandatory DESCRIPTION " A switch to select Source Port of Address Binding List. " ::= { ipmacBindingEntry 5 } ipmacdeleteall OBJECT-TYPE SYNTAX INTEGER { action(1), noaction(2) } ACCESS read-write STATUS mandatory DESCRIPTION " A switch to select delete all of Address Binding List. " ::= { ipmacMgt 3 } -- 20 ====================================================== aclFunction OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-write STATUS mandatory DESCRIPTION " A switch to select whether acl function is enable/disable " ::= { aclMgt 1 } acMaxRule OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " To support Max Rule " ::= { aclMgt 2 } aclConfTable OBJECT-TYPE SYNTAX SEQUENCE OF AclConfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " " ::= { aclMgt 3 } aclConfEntry OBJECT-TYPE SYNTAX AclConfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " " INDEX {aclRuleNo } ::= { aclConfTable 1 } AclConfEntry ::= SEQUENCE { aclRuleNo INTEGER , aclRuleActive INTEGER , aclRuleName DisplayString , aclRuleL2Frame INTEGER , aclRuleSrcMac MacAddress, aclRuleSrcMacBitMask MacAddress, aclRuleDestMac MacAddress, aclRuleDestMacBitMask MacAddress, aclRuleTaggedFrame INTEGER , aclRuleVLAN INTEGER , aclRuleEthernetTypeAny INTEGER , aclRuleEthernetType OCTET STRING, aclRuleL3Frame INTEGER, aclRuleSrcIp IpAddress, aclRuleSrcIpAddressPrefix INTEGER, aclRuleDestIp IpAddress, aclRuleDestIpAddressPrefix INTEGER, aclRuleIpProtocolAny INTEGER, aclRuleIpProtocol INTEGER, aclRuleL4Frame INTEGER, aclRuleSourceSocketPortNumber INTEGER, aclRuleSourceSocketPortNumberANY INTEGER, aclRuleDestinationSocketPortNumberANY INTEGER, aclRuleDestinationSocketPortNumber INTEGER, aclRuleSrcPort PortList, aclRuleAction INTEGER, aclRuleActionFloodToOnePort INTEGER, aclRuleAcRateLimit INTEGER, aclRuleAcRateUnit INTEGER } aclRuleNo OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " This is the number of the rule" ::= { aclConfEntry 1 } aclRuleActive OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-write STATUS mandatory DESCRIPTION " This is to assign the the rule to be active/in-active" ::= { aclConfEntry 2 } aclRuleName OBJECT-TYPE SYNTAX DisplayString( SIZE(0..15)) ACCESS read-write STATUS mandatory DESCRIPTION " Name of the rule." ::= { aclConfEntry 3 } aclRuleL2Frame OBJECT-TYPE SYNTAX INTEGER { l2_Others(0), ether_II(1), snap(2), any(99) } ACCESS read-write STATUS mandatory DESCRIPTION " This is to assign the value of L2 Frame" ::= { aclConfEntry 4 } aclRuleSrcMac OBJECT-TYPE SYNTAX MacAddress ACCESS read-write STATUS mandatory DESCRIPTION " This is to assign the value of Source MAC Address " ::= { aclConfEntry 5 } aclRuleSrcMacBitMask OBJECT-TYPE SYNTAX MacAddress ACCESS read-write STATUS mandatory DESCRIPTION " This is to assign the value of Source MAC Address Bit Mask, If the value is 00 00 00 00 00 00, it works ANY" ::= { aclConfEntry 6 } aclRuleDestMac OBJECT-TYPE SYNTAX MacAddress ACCESS read-write STATUS mandatory DESCRIPTION " This is to assign the value of Destination MAC Address " ::= { aclConfEntry 7 } aclRuleDestMacBitMask OBJECT-TYPE SYNTAX MacAddress ACCESS read-write STATUS mandatory DESCRIPTION " This is to assign the value of Destination MAC Address Bit Mask, If the value is 00 00 00 00 00 00, it works ANY" ::= { aclConfEntry 8 } aclRuleTaggedFrame OBJECT-TYPE SYNTAX INTEGER { untagged(0), tagged(1), any(99) } ACCESS read-write STATUS mandatory DESCRIPTION " This is to assign the value of Tagged Frame" ::= { aclConfEntry 9 } aclRuleVLAN OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION " This is to assign the value of VLAN , if vlan>4095, any" ::= { aclConfEntry 10 } aclRuleEthernetTypeAny OBJECT-TYPE SYNTAX INTEGER { ethernettype(0), any(1) } ACCESS read-write STATUS mandatory DESCRIPTION " This is to assign the value of Ethernet Type to be ANY " ::= { aclConfEntry 11 } aclRuleEthernetType OBJECT-TYPE SYNTAX OCTET STRING (SIZE (2)) ACCESS read-write STATUS mandatory DESCRIPTION " This is to assign the value of Ethernet Type " ::= { aclConfEntry 12 } aclRuleL3Frame OBJECT-TYPE SYNTAX INTEGER { l3_Others(0), ipv4(1), ipv6(2), any(99) } ACCESS read-write STATUS mandatory DESCRIPTION " This is to assign the value of L3 Frame" ::= { aclConfEntry 13 } aclRuleSrcIp OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION " This is to assign the value of Source IP Address Prefix" ::= { aclConfEntry 14 } aclRuleSrcIpAddressPrefix OBJECT-TYPE SYNTAX INTEGER (1..32) ACCESS read-write STATUS mandatory DESCRIPTION " This is to assign the value of Source IP Address Prefix" ::= { aclConfEntry 15 } aclRuleDestIp OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION " This is to assign the value of Destination IP Address Prefix" ::= { aclConfEntry 16 } aclRuleDestIpAddressPrefix OBJECT-TYPE SYNTAX INTEGER (1..32) ACCESS read-write STATUS mandatory DESCRIPTION " This is to assign the value of Destination IP Address Prefix" ::= { aclConfEntry 17 } aclRuleIpProtocolAny OBJECT-TYPE SYNTAX INTEGER { ipProtocol(0), any(1) } ACCESS read-write STATUS mandatory DESCRIPTION " This is to assign the value of IP Protocol to be ANY " ::= { aclConfEntry 18 } aclRuleIpProtocol OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION " This is to assign the value of IP Protocol " ::= { aclConfEntry 19 } aclRuleL4Frame OBJECT-TYPE SYNTAX INTEGER { l4_Others(0), tcp(1), udp(2), icmp/igmp(3), any(99) } ACCESS read-write STATUS mandatory DESCRIPTION " This is to assign the value of L4 Frame" ::= { aclConfEntry 20 } aclRuleSourceSocketPortNumberANY OBJECT-TYPE SYNTAX INTEGER { socketPortNumber(0), any(1) } ACCESS read-write STATUS mandatory DESCRIPTION " This is to assign the value of Source Socket Port Number to ANY" ::= { aclConfEntry 21 } aclRuleSourceSocketPortNumber OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION " This is to assign the value of Source Socket Port Number" ::= { aclConfEntry 22 } aclRuleDestinationSocketPortNumberANY OBJECT-TYPE SYNTAX INTEGER { socketPortNumber(0), any(1) } ACCESS read-write STATUS mandatory DESCRIPTION " This is to assign the value of Destination Socket Port Number to ANY" ::= { aclConfEntry 23 } aclRuleDestinationSocketPortNumber OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION " This is to assign the value of Destination Socket Port Number" ::= { aclConfEntry 24 } aclRuleSrcPort OBJECT-TYPE SYNTAX PortList ACCESS read-write STATUS mandatory DESCRIPTION " " ::= { aclConfEntry 25 } aclRuleAction OBJECT-TYPE SYNTAX INTEGER { permit(0), deny(1), flood_All(2), flood_To_One_Port(3) } ACCESS read-write STATUS mandatory DESCRIPTION " This is to assign Policy/Action" ::= { aclConfEntry 26 } aclRuleActionFloodToOnePort OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION " This is to assign the port in Flood_To_One_port mode of Policy/Action" ::= { aclConfEntry 27 } aclRuleAcRateLimit OBJECT-TYPE SYNTAX INTEGER (0..1000) ACCESS read-write STATUS mandatory DESCRIPTION " This is to assign the rate limit , 0= no limit" ::= { aclConfEntry 28 } aclRuleAcRateUnit OBJECT-TYPE SYNTAX INTEGER { bpsk(0), bpsM(1), } ACCESS read-write STATUS mandatory DESCRIPTION " This is to assign the rate unit 0=62.5k/1=1M" ::= { aclConfEntry 29 } -- 21 ====================================================== -- (.655.6.100.1.21) loopbackConfTable OBJECT-TYPE SYNTAX SEQUENCE OF LoopbackConfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " A Switch set up loopback configuration for each port." ::= { loopbackMgt 1} loopbackConfEntry OBJECT-TYPE SYNTAX LoopbackConfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " Port loopback information entry." INDEX { portLoopbackIndex } ::= { loopbackConfTable 1 } LoopbackConfEntry ::= SEQUENCE { portLoopbackIndex INTEGER, portloopbackEnable INTEGER, portloopbackControl INTEGER, portloopbackInShutdown INTEGER, portloopbackInLoop INTEGER } portLoopbackIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " port number, This is defined as ifIndex in the IF-MIB. " ::= { loopbackConfEntry 1 } portloopbackEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2), } ACCESS read-write STATUS mandatory DESCRIPTION "Port loopback detection function is enabled/disabled. " ::= { loopbackConfEntry 2 } portloopbackControl OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2), } ACCESS read-write STATUS mandatory DESCRIPTION "Configure the Switch to enable/disable to shutdown the current port once the port is found in a loop " ::= { loopbackConfEntry 3 } portloopbackInShutdown OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2), } ACCESS read-write STATUS mandatory DESCRIPTION "The port is in Shutdown" ::= { loopbackConfEntry 4 } portloopbackInLoop OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2), } ACCESS read-only STATUS mandatory DESCRIPTION "The port is in a loop" ::= { loopbackConfEntry 5 } -- 22 ====================================================== -- (.655.6.100.1.22) portConfTable OBJECT-TYPE SYNTAX SEQUENCE OF PortConfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " " ::= { dhcpsnoopMgt 2 } portConfEntry OBJECT-TYPE SYNTAX PortConfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " " INDEX { dhcpsnoopportindex } ::= { portConfTable 1 } PortConfEntry ::= SEQUENCE { dhcpsnoopportindex INTEGER , dhcpsnooptrust INTEGER, dhcpsnooprate INTEGER } dhcpsnoopportindex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " " ::= { portConfEntry 1 } dhcpsnooptrust OBJECT-TYPE SYNTAX INTEGER { trust(1), untrust(2) } ACCESS read-write STATUS mandatory DESCRIPTION " A switch to select Trust/Untrust port of DHCP SNOOPING. " ::= { portConfEntry 2 } dhcpsnooprate OBJECT-TYPE SYNTAX INTEGER (0..5) ACCESS read-write STATUS mandatory DESCRIPTION " A switch to select dhcp snooping rate whether it is between 0 and 5 (*62.5 Kbps). When it is 0 ,No limit. " ::= { portConfEntry 3 } dhcpsnoopTable OBJECT-TYPE SYNTAX SEQUENCE OF DhcpsnoopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " " ::= { dhcpsnoopMgt 3 } dhcpsnoopEntry OBJECT-TYPE SYNTAX DhcpsnoopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " " INDEX { tableindex } ::= { dhcpsnoopTable 1 } DhcpsnoopEntry ::= SEQUENCE { tableindex INTEGER , dhcpsnoopvid INTEGER, dhcpsnoopip IpAddress, dhcpsnoopmac MacAddress, dhcpsnooplease INTEGER, dhcpsnoopport INTEGER } tableindex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " " ::= { dhcpsnoopEntry 1 } dhcpsnoopvid OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " A switch to show dhcp snooping table of VID. " ::= { dhcpsnoopEntry 2 } dhcpsnoopip OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION " A switch to show dhcp snooping table of ip address. " ::= { dhcpsnoopEntry 3 } dhcpsnoopmac OBJECT-TYPE SYNTAX MacAddress ACCESS read-only STATUS mandatory DESCRIPTION " A switch to show dhcp snooping table of MAC. " ::= { dhcpsnoopEntry 4 } dhcpsnooplease OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " A switch to show dhcp snooping table of Lease time. " ::= { dhcpsnoopEntry 5 } dhcpsnoopport OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " A switch to show dhcp snooping table of port. " ::= { dhcpsnoopEntry 6 } dhcpsnoopstatus OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-write STATUS mandatory DESCRIPTION " A switch to select whether the dhcp snoop status is ON or OFF. The default is OFF." ::= { dhcpsnoopMgt 201 } dhcpsnoopwrite OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-write STATUS mandatory DESCRIPTION " A switch to select whether the dhcp Write delay status is ON or OFF. The default is OFF." ::= { dhcpsnoopMgt 202 } dhcpsnoopwritedelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION " A switch to select whether the dhcp Write delay time is between 10 and 65535. The default is 10." ::= { dhcpsnoopMgt 203 } dhcpsnoopfile OBJECT-TYPE SYNTAX DisplayString( SIZE(0..32)) ACCESS read-write STATUS mandatory DESCRIPTION " The filename of dhcp snooping table" ::= { dhcpsnoopMgt 204 } dhcpsnoopagentip OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION " A switch to set up the tftp server ip address" ::= { dhcpsnoopMgt 205 } dhcpsnooprenew OBJECT-TYPE SYNTAX INTEGER { action(1), noaction(2) } ACCESS read-write STATUS mandatory DESCRIPTION " A switch to select whether the dhcp snoop status is renew." ::= { dhcpsnoopMgt 206 } -- 23 ====================================================== lldpPortConfTable OBJECT-TYPE SYNTAX SEQUENCE OF LldpPortConfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " " ::= { lldpMgt 3 } lldpPortConfEntry OBJECT-TYPE SYNTAX LldpPortConfEntry ACCESS not-accessible STATUS mandatory INDEX { lldpPortIndex } ::= { lldpPortConfTable 1 } LldpPortConfEntry ::= SEQUENCE { lldpPortIndex INTEGER, lldpPortstate INTEGER } lldpPortIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " The port number of lldp, " ::= { lldpPortConfEntry 1 } lldpPortstate OBJECT-TYPE SYNTAX INTEGER { disabled(1), rxtx(2), tx(3), rx(4) } ACCESS read-write STATUS mandatory DESCRIPTION "A switch to select LLDP port state whether it is disabled/RX and TX/TX only/RX only " ::= { lldpPortConfEntry 2 } lldplistTable OBJECT-TYPE SYNTAX SEQUENCE OF LldplistEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " " ::= { lldpMgt 4 } lldplistEntry OBJECT-TYPE SYNTAX LldplistEntry ACCESS not-accessible STATUS mandatory INDEX { lldpIdIndex } ::= { lldplistTable 1 } LldplistEntry ::= SEQUENCE { lldpIdIndex INTEGER, lldpPortID INTEGER, lldpChassid DisplayString, lldpRemotePortid DisplayString, lldpTimelive INTEGER, lldpPortDescr DisplayString, lldpSystemName DisplayString, lldpSystDescr DisplayString, lldpSystemCapa DisplayString, lldpMamgtAddr IpAddress } lldpIdIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " The id of lldp table list, " ::= { lldplistEntry 1 } lldpPortID OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "It is local Port. " ::= { lldplistEntry 2 } lldpChassid OBJECT-TYPE SYNTAX DisplayString(SIZE(0..200)) ACCESS read-only STATUS mandatory DESCRIPTION " The Chassis ID of lldp." ::= { lldplistEntry 3 } lldpRemotePortid OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION " The Remote Port ID of lldp." ::= { lldplistEntry 4 } lldpTimelive OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The Time to live of lldp. " ::= { lldplistEntry 5 } lldpPortDescr OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION " The Port Description of remote switch." ::= { lldplistEntry 6 } lldpSystemName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION " The System Description of remote switch." ::= { lldplistEntry 7 } lldpSystDescr OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION " The System Description of remote switch." ::= { lldplistEntry 8 } lldpSystemCapa OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION " The System Capabilities of remote switch." ::= { lldplistEntry 9 } lldpMamgtAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION " The Management Address of remote switch. " ::= { lldplistEntry 10 } lldpstate OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-write STATUS mandatory DESCRIPTION " A switch to select whether the lldp status is ON or OFF. The default is OFF." ::= { lldpMgt 201 } lldpportdesrstate OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-write STATUS mandatory DESCRIPTION " The Transmitted TLVs of lldp whether the Port Description is ON or OFF. The default is ON." ::= { lldpMgt 202 } lldpsystemnamestate OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-write STATUS mandatory DESCRIPTION " The Transmitted TLVs of lldp whether the System Name is ON or OFF. The default is ON." ::= { lldpMgt 203 } lldpsystemdescrstate OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-write STATUS mandatory DESCRIPTION " The Transmitted TLVs of lldp whether the System Description is ON or OFF. The default is ON." ::= { lldpMgt 204 } lldpsystemcapastate OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-write STATUS mandatory DESCRIPTION " The Transmitted TLVs of lldp whether the System Capabilities is ON or OFF. The default is ON." ::= { lldpMgt 205 } lldpmgmtaddrstate OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-write STATUS mandatory DESCRIPTION " The Transmitted TLVs of lldp whether the Management Address is ON or OFF. The default is ON." ::= { lldpMgt 206 } lldpInterval OBJECT-TYPE SYNTAX INTEGER (5..32768) ACCESS read-write STATUS mandatory DESCRIPTION " A switch to select whether the lldp Interval. The default is 30. ." ::= { lldpMgt 211 } lldpTxhold OBJECT-TYPE SYNTAX INTEGER (2..10) ACCESS read-write STATUS mandatory DESCRIPTION " A switch to select whether the lldp Tx Hold. The default is 4. ." ::= { lldpMgt 212 } lldpTxdelay OBJECT-TYPE SYNTAX INTEGER (1..8192) ACCESS read-write STATUS mandatory DESCRIPTION " A switch to select whether the lldp Tx Delay. The default is 2. ." ::= { lldpMgt 213 } lldpReinitdelay OBJECT-TYPE SYNTAX INTEGER (1..10) ACCESS read-write STATUS mandatory DESCRIPTION " A switch to select whether the lldp Reinit Delay. The default is 2. ." ::= { lldpMgt 214 } --- -- Traps defined by RFC1493 -- ========================================================================== switchTrapLevel OBJECT IDENTIFIER ::= { trapMgt 1 } --virtualLanDomainIndex OBJECT IDENTIFIER ::= { virtualLanEntry 1 } --trunkGroupIndex OBJECT IDENTIFIER ::= { trunkGroupEntry 1 } newRoot TRAP-TYPE ENTERPRISE dot1dBridge VARIABLES { switchTrapLevel } DESCRIPTION " Become the new root of the Spanning Tree." ::= 1 topologyChange TRAP-TYPE ENTERPRISE dot1dBridge VARIABLES { switchTrapLevel } DESCRIPTION " Spanning tree topology change." ::= 2 -- ================================================================== -- Traps for use by reset & test switch_Reset TRAP-TYPE ENTERPRISE switch VARIABLES { switchTrapLevel } DESCRIPTION " Successfully reset the switching hub." ::= 100 switch_FReset TRAP-TYPE ENTERPRISE switch VARIABLES { switchTrapLevel } DESCRIPTION " Fattory reset of the switching hub is successful." ::= 101 -- ================================================================== -- Traps for use by port status switch_Port_Enabled TRAP-TYPE ENTERPRISE switch VARIABLES { switchTrapLevel, portIndex } DESCRIPTION " Enable a port." ::= 110 switch_Port_Disabled TRAP-TYPE ENTERPRISE switch VARIABLES { switchTrapLevel, portIndex } DESCRIPTION " Disable a port." ::= 111 -- ===================== -- Traps for use by port status changed switch_Port_Speed_Duplex_Change TRAP-TYPE ENTERPRISE switch VARIABLES { switchTrapLevel, portIndex, portSpeedDpxStatus } DESCRIPTION " Speed & Duplex status of the switching port is changed." ::= 120 -- =============================== -- switch_Static_Addr_In_Collision TRAP-TYPE -- ENTERPRISE switch -- VARIABLES { switchTrapLevel, -- switchTrapStaticCollisionAddress1, -- switchTrapStaticCollisionAddress2, -- switchTrapStaticCollisionAddressNew -- } -- DESCRIPTION -- " Set address is collision in setting static address." -- ::= 130 -- =============================== -- Traps for use by port Mirror switch_Port_Mirror_On TRAP-TYPE ENTERPRISE switch VARIABLES { switchTrapLevel } DESCRIPTION " Enable port Mirror function." ::= 140 switch_Port_Mirror_Off TRAP-TYPE ENTERPRISE switch VARIABLES { switchTrapLevel } DESCRIPTION " Disable port Mirror function." ::= 141 -- =============================== -- Traps for use by virtual LAN switch_Virtual_LAN_On TRAP-TYPE ENTERPRISE switch VARIABLES { switchTrapLevel } DESCRIPTION " Enable Virtual LAN function." ::= 150 switch_Virtual_LAN_Off TRAP-TYPE ENTERPRISE switch VARIABLES { switchTrapLevel } DESCRIPTION " Disable Virtual LAN function." ::= 151 switch_VL_ReConfiguration TRAP-TYPE ENTERPRISE switch VARIABLES { switchTrapLevel, --virtualLanDomainIndex } DESCRIPTION " VLAN re-configuration." ::= 152 -- =============================== -- Traps for use by Port Trunk switch_Port_Trunk_On TRAP-TYPE ENTERPRISE switch VARIABLES { switchTrapLevel } DESCRIPTION " Enable Port Trunk function." ::= 160 switch_Port_Trunk_Off TRAP-TYPE ENTERPRISE switch VARIABLES { switchTrapLevel } DESCRIPTION " Disable Port Trunk function." ::= 161 -- switch_Port_Trunk_ReConfigure TRAP-TYPE ENTERPRISE switch VARIABLES { switchTrapLevel, trunkIndex } DESCRIPTION " One Port Trunk group re-configure." ::= 162 -- ================================================================== END -- EOF