AQUASYSTEM-MIB DEFINITIONS ::= BEGIN IMPORTS wanflex FROM INFINET-MIB ifEntry FROM IF-MIB DisplayString FROM SNMPv2-TC MODULE-IDENTITY, OBJECT-TYPE, Counter32, Gauge32, Integer32, Unsigned32, IpAddress FROM SNMPv2-SMI OBJECT-GROUP, MODULE-COMPLIANCE FROM SNMPv2-CONF; aquasystemMIB MODULE-IDENTITY LAST-UPDATED "201407290657Z" ORGANIZATION "Infinet Wireless Ltd." CONTACT-INFO "Andrew Nesheret Postal: Infinet Wireless Ltd., Russia, Ekaterinburg, Serafimi Deryabinoi st, 24 Phone: +7 343 253 1533 Email: aberzin@infinetwireless.com" DESCRIPTION "The mib module, containing various WanFlex options." REVISION "201802261030Z" DESCRIPTION "added sysBuildDate and sysBuidTime" REVISION "201407290657Z" DESCRIPTION "sysMgmtAccess accees changed to read-only; description changed for sysMgmtFrmwDlPath, sysMgmtFrmwUlPath, sysMgmtLicDlPath, sysMgmtLicUlPath, sysMgmtCfgDlPath, sysMgmtCfgUlPath concerning SNMP error codes and optional usage of operative ftp account." REVISION "201406030350Z" DESCRIPTION "sysFirmwareID added in aquasystemMIB 16." REVISION "201401210721Z" DESCRIPTION "'hold' value added to sysMgmtCurrentState. 'blocked' value added to result state of every management action." REVISION "201401150438Z" DESCRIPTION "sysMgmt brunch added in aquasystemMIB 23" REVISION "201307221104Z" DESCRIPTION "sysSoftwareVersion added in aquasystemMIB 14. sysModel added in aquasystemMIB 15" REVISION "201306191622Z" DESCRIPTION "sysLastRebootReason added in aquasystemMIB 13." REVISION "201206130816Z" DESCRIPTION "sysSerialNumberStr added in aquasystemMIB 11. sysNote moved to aquasystemMIB 12." REVISION "201102160934Z" DESCRIPTION "sysNote added. sysIf, sysMem, sysQueue branches added." REVISION "200805050900Z" DESCRIPTION "Restart Timer added." REVISION "200711081116Z" DESCRIPTION "Contact information changed." REVISION "200708231732Z" DESCRIPTION "The mib module, containing various WanFlex options." ::= { wanflex 3 } sysGPSXY OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "Geographical coordinates of the unit (longitude and latitude) in degrees. This parameter is used for automatic tweaking of radio module parameters." ::= { aquasystemMIB 1 } sysFastRoute OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates whether fast routing mode is turned on or off. A router in fast routing mode effectively does not decrement the value in TTL field of IP packet, thus making itself invisible to route tracing programs, like tracert. It is not recommended to use fast routing mode on two or more devices in the same network segment to avoid IP storms." ::= { aquasystemMIB 2 } sysICMPLimit OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets limit on outgoing ICMP packets per second (200 by default). This feature is used to avoid unit overload when network scanners are used. When this value is set to zero, this limit is lifted." ::= { aquasystemMIB 3 } sysSendRedirects OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates whether the system is allowed to send ICMP redirect messages." ::= { aquasystemMIB 4 } sysDropRedirects OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates whether the system ignores incoming ICMP redirect messages." ::= { aquasystemMIB 5 } sysCpu OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This value indicates current CPU load rate in per cent." ::= { aquasystemMIB 6 } sysTemperature OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This value indicates current board temperature in tenth of degrees Celsius." ::= { aquasystemMIB 7 } sysTrapSequence OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This value indicates sequence number of the trap last sent." ::= { aquasystemMIB 8 } sysSerialNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This value indicates device's serial number." ::= { aquasystemMIB 9 } sysRestartTimer OBJECT-TYPE SYNTAX Unsigned32 (0..107374) MAX-ACCESS read-write STATUS current DESCRIPTION "This variable defines system timer counter that sets time in seconds left till device reboot. To cancel time counter set variable to '0'." ::= { aquasystemMIB 10 } sysSerialNumberStr OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This value indicates device's serial number as character string." ::= { aquasystemMIB 11 } sysNote OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "This variable holds administrative note." ::= { aquasystemMIB 12 } sysLastRebootReason OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This value indicates device's last reboot reason." ::= { aquasystemMIB 13 } sysSoftwareVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Dot-separated string compiled of integers for OS version, subversion and build version." ::= { aquasystemMIB 14 } sysModel OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "PN field from License." ::= { aquasystemMIB 15 } sysFirmwareID OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "system Firmware ID" ::= { aquasystemMIB 16 } sysBuildDate OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "system Firmware build date" ::= { aquasystemMIB 17 } sysBuildTime OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "system Firmware build time" ::= { aquasystemMIB 18 } sysIf OBJECT IDENTIFIER ::= { aquasystemMIB 20 } sysIfTable OBJECT-TYPE SYNTAX SEQUENCE OF SysIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains additional objects for RFC2863 ifTable." ::= { sysIf 1 } sysIfEntry OBJECT-TYPE SYNTAX SysIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing additional management information applicable to a particular interface." AUGMENTS { ifEntry } ::= { sysIfTable 1 } SysIfEntry ::= SEQUENCE { sysIfCurPpsRx Gauge32, sysIfCurPpsTx Gauge32, sysIfCurLoadRx Gauge32, sysIfCurLoadTx Gauge32 } sysIfCurPpsRx OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current rate of inbound traffic on interface measured in packets per second." ::= { sysIfEntry 1 } sysIfCurPpsTx OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current rate of outbound traffic on interface measured in packets per second." ::= { sysIfEntry 2 } sysIfCurLoadRx OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current rate of inbound traffic on interface measured in kilobits per second." ::= { sysIfEntry 3 } sysIfCurLoadTx OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current rate of outbound traffic on interface measured in kilobits per second." ::= { sysIfEntry 4 } sysMem OBJECT IDENTIFIER ::= { aquasystemMIB 21 } sysMemTotal OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total memory in bytes." ::= { sysMem 1 } sysMemFree OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Free memory in bytes." ::= { sysMem 2 } sysNetBufsInUse OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of network buffers currently in use." ::= { sysMem 3 } sysNetPagesTotal OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of pages." ::= { sysMem 4 } sysNetPagesInUse OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of pages currently in use." ::= { sysMem 5 } sysQueue OBJECT IDENTIFIER ::= { aquasystemMIB 22 } sysQueueTable OBJECT-TYPE SYNTAX SEQUENCE OF SysQueueEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Statistics of system queues." ::= { sysQueue 1 } sysQueueEntry OBJECT-TYPE SYNTAX SysQueueEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { sysQueueIndex } ::= { sysQueueTable 1 } SysQueueEntry ::= SEQUENCE { sysQueueIndex Integer32, sysQueueName OCTET STRING, sysQueueLen Unsigned32, sysQueueMaxLen Unsigned32, sysQueueDrops Unsigned32 } sysQueueIndex OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The index value which uniquely identifies system packet queue to which statistics in this entry is applicable." ::= { sysQueueEntry 1 } sysQueueName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Symbol name of system packet queue." ::= { sysQueueEntry 2 } sysQueueLen OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current queue length." ::= { sysQueueEntry 3 } sysQueueMaxLen OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum known queue length." ::= { sysQueueEntry 4 } sysQueueDrops OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Queue drops." ::= { sysQueueEntry 5 } sysMgmt OBJECT IDENTIFIER ::= { aquasystemMIB 23 } sysMgmtGlobals OBJECT IDENTIFIER ::= { sysMgmt 1 } sysMgmtAccess OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "String with ftp access details in the form 'username:password@ftpserverIP' used as default ftp account for management operations." ::= { sysMgmtGlobals 1 } sysMgmtSrcIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Actual device address to use as source IP address in ftp sessions for management data transfer." ::= { sysMgmtGlobals 2 } sysMgmtCurrentState OBJECT-TYPE SYNTAX INTEGER { idle(0), busy(1), hold(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current state is 'busy' while any management action is active and immediately goes either to 'idle' when current action is failed or to 'hold' if action succeeded. 'Hold' state is kept for 15s, even if performed management action implies system reboot. Only occasional reboot for another reason can break this sequence. Next management action can start only if this state is 'idle'. It prevents concurrent management actions via SNMP." ::= { sysMgmtGlobals 3 } sysMgmtOperProgress OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "This indicator value corresponds to action progress in percentage. If action fails, this value immediately is frozen until sysMgmtCurrentState goes to 'idle'. If action is successfuly completed, this value is 100 and is frozen while sysMgmtCurrentState is 'hold', then returns to zero." ::= { sysMgmtGlobals 4 } sysMgmtErrorString OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Error string providing more details about error reasons indicated by sysMgmtFrmwDlResult, sysMgmtFrmwUlResult, sysMgmtLicDlResult, sysMgmtLicUlResult, sysMgmtCfgDlResult, sysMgmtCfgUlResult. This string is kept unchanged until any next management action is started." ::= { sysMgmtGlobals 5 } sysMgmtHoldTimer OBJECT-TYPE SYNTAX Gauge32 (0..15) MAX-ACCESS read-only STATUS current DESCRIPTION "This countdown timer shows the value in seconds left till result of previous management action is hold intact. This timer also means time remaining until device reboot after management action which implies the reboot." ::= { sysMgmtGlobals 6 } sysMgmtFrmw OBJECT IDENTIFIER ::= { sysMgmt 2 } sysMgmtFrmwDlPath OBJECT-TYPE SYNTAX DisplayString (SIZE (1..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "Filename (with optional path w/o leading '/') of downloadable firmare file at ftp server. Any successful SET operation on sysMgmtFrmwDlPath starts management action of downloading firmware file from ftp server. Optionally, operative ftp account in the same format as described for sysMgmtAccess can be supplied to overwrite default ftp account for current operation only. If so, such account string, followed by single whitespace, should be prepended to optional path and required filename. SET operation will return inconsistentValue error if sysMgmtCurrentState is not 'idle'. SET operation will return wrongLength error if new value is empty. SET operation will return wrongValue error if any of the following is true: - sysMgmtAccess is empty and no ftp account is present in the string, - used ftp account (either sysMgmtAccess or specified in the string) has invalid format, - full path to file has illegal chars or double slashes. Otherwise SET operation is successful, but ftp connection can fail later if either used ftp account is invalid or provided filepath and|or filename are inconsistent with ftp-server file locations or permissions. If ftp transfer succeded and firmware checks passed, then old firmware is overwritten with new one and device is auto rebooted. The value of sysMgmtFrmwDlPath is kept unchanged till next invocation of firmware downloading action." ::= { sysMgmtFrmw 1 } sysMgmtFrmwDlResult OBJECT-TYPE SYNTAX INTEGER { success(0), system-error(1), ftp-error(2), firmware-error(3), blocked(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The result code of firmware downloading action. More verbose description of an error can be found in sysMgmtErrorString. This result code is kept unchanged till next firmware downloading action is started." ::= { sysMgmtFrmw 2 } sysMgmtFrmwUlPath OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Filename (with optional path w/o leading '/') of firmare file which should be uploaded to ftp server. Any successful SET operation on sysMgmtFrmwUlPath starts next management action of uploading firmware file to ftp server. Filename will be auto-prepended with 'SN-nnnn.' string to distinct uploaded files from other devices, e.g. if provided filename and path are 'uploads/fmw', then SN-nnnn.fmw file will be created in 'uploads' folder at ftp server, where nnnn is value of sysSerialNumber. Optionally, operative ftp account in the same format as described for sysMgmtAccess can be supplied to overwrite default ftp account for current operation only. If so, such account string, followed by single whitespace, should be prepended to optional path and required filename. SET operation will return inconsistentValue error if sysMgmtCurrentState is not 'idle'. SET operation will return wrongLength error if new value is empty. SET operation will return wrongValue error if any of the following is true: - sysMgmtAccess is empty and no ftp account is present in the string, - used ftp account (either sysMgmtAccess or specified in the string) has invalid format, - full path to file has illegal chars or double slashes. Otherwise SET operation is successful, but ftp connection can fail later if either used ftp account is invalid or provided filepath and|or filename are inconsistent with ftp-server file locations or permissions. The value of sysMgmtFrmwUlPath is kept unchanged till next invocation of firmware uploading action." ::= { sysMgmtFrmw 3 } sysMgmtFrmwUlResult OBJECT-TYPE SYNTAX INTEGER { success(0), system-error(1), ftp-error(2), blocked(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The result code of firmware uploading action. More verbose description of an error can be found in sysMgmtErrorString. This result code is kept unchanged till next firmware uploading action is started." ::= { sysMgmtFrmw 4 } sysMgmtLic OBJECT IDENTIFIER ::= { sysMgmt 3 } sysMgmtLicDlPath OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Filename (with optional path w/o leading '/') of downloadable license file at ftp server. Any successful SET operation on sysMgmtLicDlPath starts management action of downloading license file from ftp server. Optionally, operative ftp account in the same format as described for sysMgmtAccess can be supplied to overwrite default ftp account for current operation only. If so, such account string, followed by single whitespace, should be prepended to optional path and required filename. SET operation will return inconsistentValue error if sysMgmtCurrentState is not 'idle'. SET operation will return wrongLength error if new value is empty. SET operation will return wrongValue error if any of the following is true: - sysMgmtAccess is empty and no ftp account is present in the string, - used ftp account (either sysMgmtAccess or specified in the string) has invalid format, - full path to file has illegal chars or double slashes. Otherwise SET operation is successful, but ftp connection can fail later if either used ftp account is invalid or provided filepath and|or filename are inconsistent with ftp-server file locations or permissions. If ftp transfer succeded and licence check passed, then licence is applied and device is auto rebooted. The value of sysMgmtLicDlPath is kept unchanged till next invocation of license downloading action." ::= { sysMgmtLic 1 } sysMgmtLicDlResult OBJECT-TYPE SYNTAX INTEGER { success(0), system-error(1), ftp-error(2), license-error(3), blocked(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The result code of license downloading action. More verbose description of an error can be found in sysMgmtErrorString. This result code is kept unchanged till next license downloading action is started." ::= { sysMgmtLic 2 } sysMgmtLicUlPath OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Filename (with optional path w/o leading '/') of license file which should be uploaded to ftp server. Any successful SET operation on sysMgmtLicUlPath starts next management action of uploading license file to ftp server. Filename will be auto-prepended with 'SN-nnnn.' string to distinct uploaded files from other devices, e.g. if provided filename and path are 'uploads/lic', then SN-nnnn.lic file will be created in 'uploads' folder at ftp server, where nnnn is value of sysSerialNumber. Optionally, operative ftp account in the same format as described for sysMgmtAccess can be supplied to overwrite used ftp account for current operation only. If so, such account string, followed by single whitespace, should be prepended to optional path and required filename. SET operation will return inconsistentValue error if sysMgmtCurrentState is not 'idle'. SET operation will return wrongLength error if new value is empty. SET operation will return wrongValue error if any of the following is true: - sysMgmtAccess is empty and no ftp account is present in the string, - used ftp account (either sysMgmtAccess or specified in the string) has invalid format, - full path to file has illegal chars or double slashes. Otherwise SET operation is successful, but ftp connection can fail later if either used ftp account is invalid or provided filepath and|or filename are inconsistent with ftp-server file locations or permissions. The value of sysMgmtLicUlPath is kept unchanged till next invocation of license uploading action." ::= { sysMgmtLic 3 } sysMgmtLicUlResult OBJECT-TYPE SYNTAX INTEGER { success(0), system-error(1), ftp-error(2), blocked(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The result code of license uploading action. More verbose description of an error can be found in sysMgmtErrorString. This result code is kept unchanged till next license uploading action is started." ::= { sysMgmtLic 4 } sysMgmtCfg OBJECT IDENTIFIER ::= { sysMgmt 4 } sysMgmtCfgDlPath OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Filename (with optional path w/o leading '/') of downloadable config file at ftp server. Any successful SET operation on sysMgmtCfgDlPath starts management action of downloading configuration file from ftp server. Optionally, operative ftp account in the same format as described for sysMgmtAccess can be supplied to overwrite used ftp account for current operation only. If so, such account string, followed by single whitespace, should be prepended to optional path and required filename. SET operation will return inconsistentValue error if sysMgmtCurrentState is not 'idle'. SET operation will return wrongLength error if new value is empty. SET operation will return wrongValue error if any of the following is true: - sysMgmtAccess is empty and no ftp account is present in the string, - used ftp account (either sysMgmtAccess or specified in the string) has invalid format, - full path to file has illegal chars or double slashes. Otherwise SET operation is successful, but ftp connection can fail later if either used ftp account is invalid or provided filepath and|or filename are inconsistent with ftp-server file locations or permissions. If ftp transfer succeded and configuration check passed, then configuration is applied and device is auto rebooted. The value of sysMgmtCfgDlPath is kept unchanged till next invocation of config downloading action." ::= { sysMgmtCfg 1 } sysMgmtCfgDlResult OBJECT-TYPE SYNTAX INTEGER { success(0), system-error(1), ftp-error(2), config-error(3), blocked(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The result code of config downloading action. More verbose description of an error can be found in sysMgmtErrorString. This result code is kept unchanged till next config downloading action is started." ::= { sysMgmtCfg 2 } sysMgmtCfgUlPath OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Filename (with optional path w/o leading '/') of configuration file which should be uploaded to ftp server. Any successful SET operation on sysMgmtCfgUlPath starts next management action of uploading current configuration to ftp server. Filename will be auto-prepended with 'SN-nnnn.' string to distinct uploaded files from other devices, e.g. if provided filename and path are 'uploads/cfg', then SN-nnnn.cfg file will be created in 'uploads' folder at ftp server, where nnnn is value of sysSerialNumber. Optionally, operative ftp account in the same format as described for sysMgmtAccess can be supplied to overwrite used ftp account for current operation only. If so, such account string, followed by single whitespace, should be prepended to optional path and required filename. SET operation will return inconsistentValue error if sysMgmtCurrentState is not 'idle'. SET operation will return wrongLength error if new value is empty. SET operation will return wrongValue error if any of the following is true: - sysMgmtAccess is empty and no ftp account is present in the string, - used ftp account (either sysMgmtAccess or specified in the string) has invalid format, - full path to file has illegal chars or double slashes. Otherwise SET operation is successful, but ftp connection can fail later if either used ftp account is invalid or provided filepath and|or filename are inconsistent with ftp-server file locations or permissions. The value of sysMgmtCfgUlPath is kept unchanged till next invocation of config uploading action." ::= { sysMgmtCfg 3 } sysMgmtCfgUlResult OBJECT-TYPE SYNTAX INTEGER { success(0), system-error(1), ftp-error(2), blocked(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The result code of config uploading action. More verbose description of an error can be found in sysMgmtErrorString. This result code is kept unchanged till next config uploading action is started." ::= { sysMgmtCfg 4 } aquasystemMIBConformance OBJECT IDENTIFIER ::= { aquasystemMIB 100 } aquasystemMIBCompliances OBJECT IDENTIFIER ::= { aquasystemMIBConformance 1 } aquasystemMIBGroups OBJECT IDENTIFIER ::= { aquasystemMIBConformance 2 } -- compliance statements aquasystemMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for Infinet wireless routers." MODULE MANDATORY-GROUPS { systemGroup } ::= { aquasystemMIBCompliances 1 } -- units of conformance systemGroup OBJECT-GROUP OBJECTS { sysGPSXY, sysFastRoute, sysICMPLimit, sysSendRedirects, sysDropRedirects, sysCpu, sysTemperature, sysTrapSequence, sysSerialNumber, sysRestartTimer, sysSerialNumberStr, sysNote, sysLastRebootReason, sysSoftwareVersion, sysModel, sysFirmwareID, sysBuildDate, sysBuildTime, sysIfCurPpsRx, sysIfCurPpsTx, sysIfCurLoadRx, sysIfCurLoadTx, sysMemFree, sysMemTotal, sysNetBufsInUse, sysNetPagesTotal, sysNetPagesInUse, sysQueueIndex, sysQueueName, sysQueueLen, sysQueueMaxLen, sysQueueDrops, sysMgmtAccess, sysMgmtSrcIp, sysMgmtCurrentState, sysMgmtOperProgress, sysMgmtErrorString, sysMgmtHoldTimer, sysMgmtFrmwDlPath, sysMgmtFrmwDlResult, sysMgmtFrmwUlPath, sysMgmtFrmwUlResult, sysMgmtLicDlPath, sysMgmtLicDlResult, sysMgmtLicUlPath, sysMgmtLicUlResult, sysMgmtCfgDlPath, sysMgmtCfgDlResult, sysMgmtCfgUlPath, sysMgmtCfgUlResult } STATUS current DESCRIPTION "The system group of objects provided for management of various WanFlex system parameters." ::= { aquasystemMIBGroups 1 } END