-- ============================================================================ -- Copyright (C) 2017 by HUAWEI TECHNOLOGIES. All rights reserved. -- Description: The entity of ont configuration and control. -- Reference: -- Version: V1.29 -- ============================================================================ --MIB Define HUAWEI-VOIP-ONT-MIB DEFINITIONS ::= BEGIN --Import types IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, private FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF TEXTUAL-CONVENTION FROM SNMPv2-TC IpAddress,TimeTicks,Counter32,Integer32,Unsigned32 FROM SNMPv2-SMI RowStatus,DisplayString FROM SNMPv2-TC huaweiUtility FROM HUAWEI-MIB hwFrameIndex,hwSlotIndex,hwPortIndex FROM HUAWEI-DEVICE-MIB; --Module define hwVoip MODULE-IDENTITY LAST-UPDATED "201707061450Z" ORGANIZATION "Huawei Technologies Co.,Ltd." CONTACT-INFO "Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China Website: http://www.huawei.com Email: support@huawei.com " DESCRIPTION " The entity of ont configuration and control. " -- Revision history REVISION "201707061450Z" DESCRIPTION "V1.29, change in this revision: -Modified the parameter of hwOntMassVoipFaultEventTrap " -- Revision history REVISION "201706071850Z" DESCRIPTION "V1.28, change in this revision: -Added hwOntVoipMassMGAlarmThreshold, -Added hwOntMassMgInterfaceFaultAlarmTrap -Added hwOntMassMgInterfaceRestoreAlarmTrap " REVISION "201706011450Z" DESCRIPTION "V1.27, change in this revision: -Modified the type of the following leaves, including: hwOntVoipFaultEventStartHour hwOntVoipFaultEventStartMinute hwOntVoipFaultEventEndHour hwOntVoipFaultEventEndMinute " REVISION "201705091421Z" DESCRIPTION "V1.26, change in this revision: -Added hwOntVoipSingleAlarmSwitch, -Added hwOntVoipMassAlarmSwitch -Added hwOntVoipMassEventSwitch -Added hwOntVoipMassEventContent -Added hwOntVoipMassEventThreshold -Added hwOntVoipFaultEventStartHour -Added hwOntVoipFaultEventStartMinute -Added hwOntVoipFaultEventEndHour -Added hwOntVoipFaultEventEndMinute -Added hwOntMassVoipFaultEventTrap -Added hwOntRecentVoipAlarmRecordTable -Added hwOntRecentVoipAlarmRecordEntry -Added hwOntRecentVoipAlarmBlockIndex -Added hwOntRecentVoipAlarmOctetString " REVISION "201607211421Z" DESCRIPTION "V1.25, change in this revision: -Modified the default value description of the following leaves, including: hwOntPstnCTPNewServiceRight hwOntMgPstnCTPCodecSelect hwOntMgPstnCTPOrder2stPacketPeriod " REVISION "201505201520Z" DESCRIPTION "V1.24, change in this revision: -Added hwOntVoipToneTable, -Added hwOntVoipSignalProfileTable -Added hwOntVoipBindSignalProfileTable -Added hwOntVoipIpIndexTable -Added hwOntVoipRingTable " REVISION "201504041437Z" DESCRIPTION "V1.23, change in this revision: --Modified the description of the following leaves, including: hwOntPstnCallerEmulateTestStatus " REVISION "201411171541Z" DESCRIPTION "V1.22, change in this revision: -Modified the range of the following leaves, including: hwOntPstnCTPIPIndex hwOntMgVagIpIndex hwOntSipVagIpIndex " REVISION "201409221000Z" DESCRIPTION "V1.21, change in this revision: -Modified the MAX-ACCESS value of the following leaves, including hwOntPotsRowStatus hwOntSipAgentRowStatus hwOntDigitMapRowStatus hwOntPotsCTPRowStatus hwOntMgVagRowStatus hwOntSipVagRowStatus hwOntMgPstnCTPRowStatus hwOntSIPCTPRowStatus -Modified the range value of the following leaves, including hwOntSipAgentTemplateIndex hwOntMgVagIfIndex hwOntMgVagOntIndex hwOntMgAttrIfIndex hwOntMgAttrOntIndex hwOntSipVagIfIndex hwOntSipVagOntIndex -Modified the description of the leaf hwOntMgAttrSilence -Deleted the OBJECT of the following traps, including hwOntMassSipUserRegisterAuthAlarmTrap hwOntMassSipUserRegisterAuthRestoreAlarmTrap hwOntMassSipUserRegisterTimeoutAlarmTrap hwOntMassSipUserRegisterTimeoutRestoreAlarmTrap hwOntMassSipUserRegisterFailAlarmTrap hwOntMassSipUserRegisterFailRestoreAlarmTrap " REVISION "201406041040Z" DESCRIPTION "V1.20, Modified the syntax for OMSYS" REVISION "201405121000Z" DESCRIPTION "V1.19, change in this revision: -Added hwOntVoipAlarmCfgTable, -Added hwOntMassSipUserRegisterAuthAlarmTrap -Added hwOntMassSipUserRegisterAuthRestoreAlarmTrap -Added hwOntMassSipUserRegisterTimeoutAlarmTrap -Added hwOntMassSipUserRegisterTimeoutRestoreAlarmTrap -Added hwOntMassSipUserRegisterFailAlarmTrap -Added hwOntMassSipUserRegisterFailRestoreAlarmTrap " REVISION "201403171000Z" DESCRIPTION "V1.18, change in this revision: -Added leaves, including: hwOntSipAgentServerType hwOntSipVagServerType -Modified the description of the following tables, including: hwOntPstnCTPConfigTable hwOntMgVagTable hwOntMgAttrConfigTable hwOntSipVagTable hwOntMgCTPConfigTable hwOntSIPCTPConfigTable " REVISION "201311111600Z" DESCRIPTION "V1.17, change in this revision: -Modified the range of the following leaves, including: hwOntPstnCTPTelNo hwOntPstnCTPUsername hwOntSIPCTPTelno hwOntSIPCTPUsername " REVISION "201306201600Z" DESCRIPTION "V1.16, change in this revision: -Added hwOntRecentCallRecordsTable " REVISION "201306191500Z" DESCRIPTION "V1.15, change in this revision: -Modified the size of the leaf hwOntPstnCTPUsername and hwOntSIPCTPUsername. " REVISION "201301181500Z" DESCRIPTION "V1.14, change in this revision: -Modified the name and description of the following tables, including: hwOntMgVagTable hwOntMgCTPConfigTable -Modified the description of the table hwMgStatusTable. -Added hwOntMgInterfaceFaultAlarmTrap -Added hwOntMgInterfaceRestoreAlarmTrap " REVISION "201210191900Z" DESCRIPTION "V1.13, change in this revision: -Modified the description of the leaf hwOntPotsPTPImpedance and hwOntPotsImpedance. " REVISION "201207201900Z" DESCRIPTION "V1.12, change in this revision: -Modified the description of the leaf hwOntVsqmPacketLossRate. " REVISION "201205081500Z" DESCRIPTION "V1.11, change in this revision: -Modified the range and description of the following leaves, including: hwOntPstnProtocolVariant hwOntMgAttrPstnProtocolVariant -Delete the Default value of the leaves in the following tables, including: hwOntH248VagTable hwOntMgAttrConfigTable hwOntSipVagTable -Modified the description of the following leaves, including: hwOntH248VagPrimaryMgcPort hwOntH248VagSecondaryMgcPort hwOntSipVagProxyPort hwOntSipVagSecondaryProxyPort hwOntSipVagRegisterPort hwOntSipVagSecondaryRegisterPort hwOntSipVagOutboundPort " REVISION "201201161124Z" DESCRIPTION "V1.10, change in this revision: -Created tables, including: hwOntH248VagTable, hwOntMgAttrConfigTable, hwOntSipVagTable, hwOntPotsPTPConfigTable, hwOntH248CTPConfigTable, hwOntSIPCTPConfigTable, hwOntDigitMapBodyTable. -Added hwOntDigitMapRohTime into hwOntDigitMapTemplateTable. -Modified the scope of some leaves, including: hwOntPotsImpedance, hwOntSipAgentProxyUri, hwOntSipAgentRegisterUri, hwOntSipAgentVoicemailUri, hwOntSipAgentConfFactoryUri, hwOntSipAgentBridgedLineAgentUri, hwOntSipAgentUserAuthRealm, hwOntSipAgentRtpPortMin, hwOntSipAgentRtpPortMax, hwOntSipAgentSignalPortId, hwOntJitterBuffTarget, hwOntJitterBuffMax, hwOntPstnCTPTelNo, hwOntPstnCTPHotlineUri, hwOntPstnCTPUsername, hwOntPstnCTPPassword, hwOntPotsCTPTemplateIndex hwOntPotsCTPTemplateName, hwOntPstnCTPDigitmapTemplateIndex, hwOntPstnCTPDigitmapTemplateName, hwOntPstnCTPSipAgentTemplateIndex, hwOntPstnCTPSipAgentTemplateName, hwOntPstnCTPIPIndex. -Changed the name of hwOntPotsSendGian to hwOntPotsSendGain, -Changed the name of hwOntPotsRecvGian to hwOntPotsRecvGain. -Modified the description of some leaves, including: hwOntDigitMapCriticalDialTime, hwOntDigitMapPartialDialTime. " REVISION "201112241547Z" DESCRIPTION "V1.09, change in this revision: Added hwOntSipAgentHomeDomain into hwOntSipAgentTemplateTable. " REVISION "201111251511Z" DESCRIPTION "V1.08, change in this revision: -Added hwOntSipUserRegisterAuthAlarmTrap -Added hwOntSipUserRegisterAuthRestoreAlarmTrap -Added hwOntSipUserRegisterTimeoutAlarmTrap -Added hwOntSipUserRegisterTimeoutRestoreAlarmTrap -Added hwOntSipUserRegisterFailAlarmTrap -Added hwOntSipUserRegisterFailRestoreAlarmTrap " REVISION "201108081511Z" DESCRIPTION "V1.07, change in this revision: -Modified the scope of some leaves,including: hwVoiceOntIndex " REVISION "201012272333Z" DESCRIPTION "V1.06, change in this revision: -Created tables, include: hwOntPotsStatusTable. - Added the definition of the hwOntPstnCallerEmulateOprTable,including: hwOntPstnCallerEmulateTestRequestID - Added the definition of the hwOntPstnCalledEmulateOprTable,including: hwOntPstnCalledEmulateTestRequestID - Created traps, include: hwOntCallerEmulateOperatorTrap hwOntCalledEmulateOperatorTrap " REVISION "201012092209Z" DESCRIPTION "V1.05, change in this revision: -Modified the scope of some leaves,including: hwOntPotsCTPTemplateIndex hwOntPstnCTPDigitmapTemplateIndex hwOntPstnCTPSipAgentTemplateIndex hwOntPstnCTPIPIndex " REVISION "201011172312Z" DESCRIPTION "V1.04, change in this revision: -Modified the description" REVISION "201011090000Z" DESCRIPTION " V1.03, change in this revision: -Modified the description of some tables. -Corrected the SYNTAX. " -- Revision history REVISION "201007100000Z" DESCRIPTION " V1.02, change in this revision: -Modified the description of all tables. " -- Revision history REVISION "201005100000Z" DESCRIPTION " V1.01, change in this revision: Added HUAWEI-VOIP-ONT-MIB " ::= { huaweiUtility 36 } --Type difine -- 1.3.6.1.4.1.2011.6.36.11 hwVoipOntObjects OBJECT IDENTIFIER ::= { hwVoip 11 } hwVoipOntTraps OBJECT IDENTIFIER ::= { hwVoip 12 } --Pstn Table define hwPstnStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF HwPstnStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The PSTN states table ,for Mib display only The indexes of this table are hwVoiceIfIndex, hwVoiceOntIndex,hwVoiceOntPortIndex" ::= { hwVoipOntObjects 1 } hwPstnStatusEntry OBJECT-TYPE SYNTAX HwPstnStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The PSTN states table ,for Mib display only The indexes of this entry are hwVoiceIfIndex, hwVoiceOntIndex,hwVoiceOntPortIndex" INDEX { hwVoiceIfIndex, hwVoiceOntIndex, hwVoiceOntPortIndex } ::= { hwPstnStatusTable 1 } --Pstn Node define HwPstnStatusEntry ::= SEQUENCE { hwVoiceIfIndex Integer32, hwVoiceOntIndex Integer32, hwVoiceOntPortIndex Integer32, hwLineStatus INTEGER, hwServiceStatus INTEGER, hwPortCodec INTEGER } --Pstn leaf define hwVoiceIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "ifIndex" ::= { hwPstnStatusEntry 1 } hwVoiceOntIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "ONT Index" ::= { hwPstnStatusEntry 2 } hwVoiceOntPortIndex OBJECT-TYPE SYNTAX Integer32(1..255) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Port in ONT" ::= { hwPstnStatusEntry 3 } hwLineStatus OBJECT-TYPE SYNTAX INTEGER{registering(1),idle(2),picking(3),dialing(4),ringing(5),backringing(6),connecting(7),connected(8),releasing(9),failregister(10),inactive(11),other(-1)} MAX-ACCESS read-only STATUS current DESCRIPTION " hwLineStatus Options: 1. registering(1) -indicates the port is registering now 2. idle(2) -indicates the port is idle 3. picking(3) -indicates pick up 4. dialing(4) -indicates dialing 5. ringing(5) -indicates ringing 6. backringing(6) -indicates ringing for back 7. connecting(7) -indicates connecting now 8. connected(8) -indicates the port is connected 9. releasing(9) -indicates connect is releasing 10. failregister(10) -indicates the port register failed 11. inactive(11) -indicates the port is not active 12. other(-1) -indicates other " ::= { hwPstnStatusEntry 4 } hwServiceStatus OBJECT-TYPE SYNTAX INTEGER{endLocal(1),endRemote(2),endAuto(3),normal(4),other(-1)} MAX-ACCESS read-only STATUS current DESCRIPTION " Service Status Options: 1. endLocal(1) -indicates end service at local,occured by disable users 2. endRemote(2) -indicates end service at other side,occured by MGC send out commands 3. endAuto(3) -indicates auto end service ,occured by failure of MGC 4. normal(4) -indicates service is normal 5. other(-1) -other " ::= { hwPstnStatusEntry 5 } hwPortCodec OBJECT-TYPE SYNTAX INTEGER{g711a(1),g729(2),g711u(3),g723(4),g726(5),t38(6),other(-1)} MAX-ACCESS read-only STATUS current DESCRIPTION " Ont Pstn Port Codec Options: 1.g711a(1) -indicates the codec mode is G.711A 2.g729(2) -indicates the codec mode is g729 3.g711u(3) -indicates the codec mode is G.711U 4.g723(4) -indicates the codec mode is g723 5.g726(5) -indicates the codec mode is G.726 6.t38(6) -indicates the codec mode is T.38 7.other(-1) -indicates the codec mode is other " ::= { hwPstnStatusEntry 6 } --Mg Table define, which added by zx hwMgStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF HwMgStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Mg states table ,for Mib display only The indexes of this table are hwVoiceIfIndex, hwVoiceOntIndex, hwVoiceOntMgId" ::= { hwVoipOntObjects 2 } --Mg Node define hwMgStatusEntry OBJECT-TYPE SYNTAX HwMgStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Mg states table ,for Mib display only The indexes of this entry are hwVoiceIfIndex, hwVoiceOntIndex, hwVoiceOntMgId" INDEX { hwVoiceIfIndex, hwVoiceOntIndex, hwVoiceOntMgId } ::= { hwMgStatusTable 1 } HwMgStatusEntry ::= SEQUENCE { hwVoiceOntMgId Integer32, hwMgStatus INTEGER } --Mg leaf define hwVoiceOntMgId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "MgId in ONT" ::= { hwMgStatusEntry 1 } hwMgStatus OBJECT-TYPE SYNTAX INTEGER{registering(1),registerok(2),malfunction(3),logout(4),rebooting(5), protocolincorrect(255), other(-1)} MAX-ACCESS read-only STATUS current DESCRIPTION " Mg Status. Options: 1.registering(1) -indicates the mg status is registering. 2.registerok(2) -indicates the mg status is register sucessfully 3.malfunction(3) -indicates the mg status is malfunction 4.logout(4) -indicates the mg status is log-out 5.rebooting(5) -indicates the mg status is rebooting 6.protocolincorrect(255) -indicates the protocol is incorrect 7.other(-1) -other " ::= { hwMgStatusEntry 2 } -- 1.3.6.1.4.1.2011.6.36.11.3 hwOntPotsTemplateTable OBJECT-TYPE SYNTAX SEQUENCE OF HwOntPotsTemplateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Table of POTS profile The index of this table is hwOntPotsTemplateIndex" ::= { hwVoipOntObjects 3 } -- 1.3.6.1.4.1.2011.6.36.11.3.1 hwOntPotsTemplateEntry OBJECT-TYPE SYNTAX HwOntPotsTemplateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Table of POTS profile The index of this entry is hwOntPotsTemplateIndex" INDEX { hwOntPotsTemplateIndex } ::= { hwOntPotsTemplateTable 1 } HwOntPotsTemplateEntry ::= SEQUENCE { hwOntPotsTemplateIndex Integer32, hwOntPotsTemplateName OCTET STRING, hwOntPotsImpedance Integer32, hwOntPotsSendGain Integer32, hwOntPotsRecvGain Integer32, hwOntPotsPotsSignaling INTEGER, hwOntPotsRowStatus RowStatus, hwOntPotsTemplateBindTimes Integer32 } -- 1.3.6.1.4.1.2011.6.36.11.3.1.1 hwOntPotsTemplateIndex OBJECT-TYPE SYNTAX Integer32 (-1|1..64) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Profile ID of POTS profile Table" ::= { hwOntPotsTemplateEntry 1 } -- 1.3.6.1.4.1.2011.6.36.11.3.1.2 hwOntPotsTemplateName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The Profile Name of POTS profile Table." ::= { hwOntPotsTemplateEntry 2 } -- 1.3.6.1.4.1.2011.6.36.11.3.1.3 hwOntPotsImpedance OBJECT-TYPE SYNTAX Integer32 (1..76) MAX-ACCESS read-write STATUS current DESCRIPTION "Impedance. Options: 1 :600 Ohms 2 :900 Ohms 3 :C1=150 nF, R1=750 Ohm, R2=270 Ohm 4 :C1=115 nF, R1=820 Ohm, R2=220 Ohm 5 :C1=230 nF, R1=1050 Ohm, R2=320 Ohm 65 :Bureau machine in China(200+680|| 100nf) 66 :User Machine in China(200+560|| 100nf) 67 :Interface of Russian(150+510|| 47nf) 68 :(220+820|| 120nf ) 69 :Interface of Brazil(800|| 50nf) 70 :Abandoned 71 :HK_BT3(Zin=370+620|| 310nf,Zload=600) 72 :HK_BT5(Zin=270+264|| 357nf+1434|| 265nf,Zload=600) 73 :BT1(Zin=87+1052||228nF+229||28.4nF, Zload=93+615||471nF+179||495nF+244||32nF) 74 :BT2(Zin=87+1052||228nF+229||28.4nF, Zload=270+264||357nF+1434||265nF) 75 :BT3(Zin=87+1052||228nF+229||28.4nF, Zload=164+162||363nF+1227||350nF) 76 :New Zealand(Zin=370+620|| 310nf) Default: 3: C1=150nF,R1=750Ohm,R2=270Ohm Impedance value 6~64 is not supported now. " DEFVAL { 3 } ::= { hwOntPotsTemplateEntry 3 } -- 1.3.6.1.4.1.2011.6.36.11.3.1.4 hwOntPotsSendGain OBJECT-TYPE SYNTAX Integer32 (1..37) MAX-ACCESS read-write STATUS current DESCRIPTION "param value of sendgain Options: 1 :-12.0 dB 2 :-11.5 dB 3 :-11.0 dB 4 :-10.5 dB 5 :-10.0 dB 6 :-9.5 dB 7 :-9.0 dB 8 :-8.5 dB 9 :-8.0 dB 10 :-7.5 dB 11 :-7.0 dB 12 :-6.5 dB 13 :-6.0 dB 14 :-5.5 dB 15 :-5.0 dB 16 :-4.5 dB 17 :-4.0 dB 18 :-3.5 dB 19 :-3.0 dB 20 :-2.5 dB 21 :-2.0 dB 22 :-1.5 dB 23 :-1.0 dB 24 :-0.5 dB 25 : 0 dB 26 :+0.5 dB 27 :+1.0 dB 28 :+1.5 dB 29 :+2.0 dB 30 :+2.5 dB 31 :+3.0 dB 32 :+3.5 dB 33 :+4.0 dB 34 :+4.5 dB 35 :+5.0 dB 36 :+5.5 dB 37 :+6.0 dB Default: 25" DEFVAL { 25 } ::= { hwOntPotsTemplateEntry 4 } -- 1.3.6.1.4.1.2011.6.36.11.3.1.5 hwOntPotsRecvGain OBJECT-TYPE SYNTAX Integer32 (1..37) MAX-ACCESS read-write STATUS current DESCRIPTION "param value of recvgain Options: 1 :-12.0 dB 2 :-11.5 dB 3 :-11.0 dB 4 :-10.5 dB 5 :-10.0 dB 6 :-9.5 dB 7 :-9.0 dB 8 :-8.5 dB 9 :-8.0 dB 10 :-7.5 dB 11 :-7.0 dB 12 :-6.5 dB 13 :-6.0 dB 14 :-5.5 dB 15 :-5.0 dB 16 :-4.5 dB 17 :-4.0 dB 18 :-3.5 dB 19 :-3.0 dB 20 :-2.5 dB 21 :-2.0 dB 22 :-1.5 dB 23 :-1.0 dB 24 :-0.5 dB 25 : 0 dB 26 :+0.5 dB 27 :+1.0 dB 28 :+1.5 dB 29 :+2.0 dB 30 :+2.5 dB 31 :+3.0 dB 32 :+3.5 dB 33 :+4.0 dB 34 :+4.5 dB 35 :+5.0 dB 36 :+5.5 dB 37 :+6.0 dB Default: 25" DEFVAL { 25 } ::= { hwOntPotsTemplateEntry 5 } -- 1.3.6.1.4.1.2011.6.36.11.3.1.6 hwOntPotsPotsSignaling OBJECT-TYPE SYNTAX INTEGER { loopStart(1), groundStart(2), loopReverseBattery(3), coinFirst(4), dialToneFirst(5), multiParty(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "pots signaling Options: 1.loopStart(1) -indicates the pots signaling is loop-start 2.groundStart(2) -indicates the pots signaling is ground-start 3.loopReverseBattery(3) -indicates the pots signaling is loop-reverse-battery 4.coinFirst(4) -indicates the pots signaling is coin-first 5.dialToneFirst(5) -indicates the pots signaling is dial-tone-first 6.multiParty(6) -indicates the pots signaling is multi-party Default:loopStart(1)" DEFVAL { loopStart } ::= { hwOntPotsTemplateEntry 6 } -- 1.3.6.1.4.1.2011.6.36.11.3.1.7 hwOntPotsRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Options: 1.active(1) -indicates active 2.notInService(2) -indicates not in service 3.notReady(3) -indicates not ready 4.createAndGo(4) -indicates create and go 5.createAndWait(5) -indicates create and wait 6.destroy(6) -indicates destroy Only 4 and 6 is support Now." ::= { hwOntPotsTemplateEntry 7 } -- 1.3.6.1.4.1.2011.6.36.11.3.1.8 hwOntPotsTemplateBindTimes OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The bind time of this profile" ::= { hwOntPotsTemplateEntry 8 } -- 1.3.6.1.4.1.2011.6.36.11.4 hwOntSipAgentTemplateTable OBJECT-TYPE SYNTAX SEQUENCE OF HwOntSipAgentTemplateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Sipagent profile table. The index of this table is hwOntSipAgentTemplateIndex" ::= { hwVoipOntObjects 4 } -- 1.3.6.1.4.1.2011.6.36.11.4.1 hwOntSipAgentTemplateEntry OBJECT-TYPE SYNTAX HwOntSipAgentTemplateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Sipagent profile table. The index of this entry is hwOntSipAgentTemplateIndex" INDEX { hwOntSipAgentTemplateIndex } ::= { hwOntSipAgentTemplateTable 1 } HwOntSipAgentTemplateEntry ::= SEQUENCE { hwOntSipAgentTemplateIndex Integer32, hwOntSipAgentTemplateName OCTET STRING, hwOntSipAgentProxyUri OCTET STRING, hwOntSipAgentRtpPortMin Integer32, hwOntSipAgentRtpPortMax Integer32, hwOntSipAgentRtpDscp Integer32, hwOntSipAgentSignalTransMode INTEGER, hwOntSipAgentSignalPortId Integer32, hwOntSipAgentSignalDscp Integer32, hwOntSipAgentRegisterUri OCTET STRING, hwOntSipAgentRegExpiration Integer32, hwOntSipAgentReRegStartTime Integer32, hwOntSipAgentVoicemailUri OCTET STRING, hwOntSipAgentVoicemailSubExpir Integer32, hwOntSipAgentConfFactoryUri OCTET STRING, hwOntSipAgentBridgedLineAgentUri OCTET STRING, hwOntSipAgentUserAuthRealm OCTET STRING, hwOntSipAgentRowStatus RowStatus, hwOntSipAgentTemplateBindTimes Integer32, hwOntSipAgentHomeDomain OCTET STRING, hwOntSipAgentServerType INTEGER } -- 1.3.6.1.4.1.2011.6.36.11.4.1.1 hwOntSipAgentTemplateIndex OBJECT-TYPE SYNTAX Integer32 (-1|1..64) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The profile ID of sipagent profile table." ::= { hwOntSipAgentTemplateEntry 1 } -- 1.3.6.1.4.1.2011.6.36.11.4.1.2 hwOntSipAgentTemplateName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The profile Name of sipagent profile table." ::= { hwOntSipAgentTemplateEntry 2 } -- 1.3.6.1.4.1.2011.6.36.11.4.1.3 hwOntSipAgentProxyUri OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "Proxy server uri." ::= { hwOntSipAgentTemplateEntry 3 } -- 1.3.6.1.4.1.2011.6.36.11.4.1.4 hwOntSipAgentRtpPortMin OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The min udp port of RTP. Default: 50000 " DEFVAL { 50000 } ::= { hwOntSipAgentTemplateEntry 4 } -- 1.3.6.1.4.1.2011.6.36.11.4.1.5 hwOntSipAgentRtpPortMax OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The max udp port of RTP. Default: 60000 " DEFVAL { 60000 } ::= { hwOntSipAgentTemplateEntry 5 } -- 1.3.6.1.4.1.2011.6.36.11.4.1.6 hwOntSipAgentRtpDscp OBJECT-TYPE SYNTAX Integer32 (0..63) MAX-ACCESS read-write STATUS current DESCRIPTION "The DSCP of Rtp. Default: 46 " DEFVAL { 46 } ::= { hwOntSipAgentTemplateEntry 6 } -- 1.3.6.1.4.1.2011.6.36.11.4.1.7 hwOntSipAgentSignalTransMode OBJECT-TYPE SYNTAX INTEGER { tcp(1), udp(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Transfer mode of signal. Options: 1.tcp(1) -indicates the signal transfer mode is tcp 2.udp(2) -indicates the signal transfer mode is udp Default:udp(2)" DEFVAL { udp } ::= { hwOntSipAgentTemplateEntry 7 } -- 1.3.6.1.4.1.2011.6.36.11.4.1.8 hwOntSipAgentSignalPortId OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The udp port of signal." ::= { hwOntSipAgentTemplateEntry 8 } -- 1.3.6.1.4.1.2011.6.36.11.4.1.9 hwOntSipAgentSignalDscp OBJECT-TYPE SYNTAX Integer32 (0..63) MAX-ACCESS read-write STATUS current DESCRIPTION "The DSCP of signal. Default: 24 " DEFVAL { 24 } ::= { hwOntSipAgentTemplateEntry 9 } -- 1.3.6.1.4.1.2011.6.36.11.4.1.10 hwOntSipAgentRegisterUri OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "The URI of register server." ::= { hwOntSipAgentTemplateEntry 10 } -- 1.3.6.1.4.1.2011.6.36.11.4.1.11 hwOntSipAgentRegExpiration OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The valid time of register." ::= { hwOntSipAgentTemplateEntry 11 } -- 1.3.6.1.4.1.2011.6.36.11.4.1.12 hwOntSipAgentReRegStartTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The time before refresh when reg time will timeout." ::= { hwOntSipAgentTemplateEntry 12 } -- 1.3.6.1.4.1.2011.6.36.11.4.1.13 hwOntSipAgentVoicemailUri OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "The URI of voicemail server." ::= { hwOntSipAgentTemplateEntry 13 } -- 1.3.6.1.4.1.2011.6.36.11.4.1.14 hwOntSipAgentVoicemailSubExpir OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The voicemail's valid time of reg." ::= { hwOntSipAgentTemplateEntry 14 } -- 1.3.6.1.4.1.2011.6.36.11.4.1.15 hwOntSipAgentConfFactoryUri OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "The uri of Confence Factory's server." ::= { hwOntSipAgentTemplateEntry 15 } -- 1.3.6.1.4.1.2011.6.36.11.4.1.16 hwOntSipAgentBridgedLineAgentUri OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "The BridgedLine's Server URI." ::= { hwOntSipAgentTemplateEntry 16 } -- 1.3.6.1.4.1.2011.6.36.11.4.1.17 hwOntSipAgentUserAuthRealm OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..24)) MAX-ACCESS read-write STATUS current DESCRIPTION "The user Realm." ::= { hwOntSipAgentTemplateEntry 17 } -- 1.3.6.1.4.1.2011.6.36.11.4.1.18 hwOntSipAgentRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Options: 1.active(1) -indicates active 2.notInService(2) -indicates not in service 3.notReady(3) -indicates not ready 4.createAndGo(4) -indicates create and go 5.createAndWait(5) -indicates create and wait 6.destroy(6) -indicates destroy Only 4 and 6 is support Now." ::= { hwOntSipAgentTemplateEntry 18 } -- 1.3.6.1.4.1.2011.6.36.11.4.1.19 hwOntSipAgentTemplateBindTimes OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The bind time of this profile." ::= { hwOntSipAgentTemplateEntry 19 } -- 1.3.6.1.4.1.2011.6.36.11.4.1.20 hwOntSipAgentHomeDomain OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "The Home Domain." ::= { hwOntSipAgentTemplateEntry 20 } hwOntSipAgentServerType OBJECT-TYPE SYNTAX INTEGER { general(1), ims(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The server type. It is valid for EPON ONT and invalid for GPON ONT. Options: 1.general(1) -indicates general SIP server 2.ims(2) -indicates IMS Default:general(1) " ::= { hwOntSipAgentTemplateEntry 21 } -- 1.3.6.1.4.1.2011.6.36.11.5 hwOntDigitMapTemplateTable OBJECT-TYPE SYNTAX SEQUENCE OF HwOntDigitMapTemplateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The DigitMap profile table. The index of this table is hwOntDigitMapTemplateIndex" ::= { hwVoipOntObjects 5 } -- 1.3.6.1.4.1.2011.6.36.11.5.1 hwOntDigitMapTemplateEntry OBJECT-TYPE SYNTAX HwOntDigitMapTemplateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The DigitMap profile table. The index of this entry is hwOntDigitMapTemplateIndex" INDEX { hwOntDigitMapTemplateIndex } ::= { hwOntDigitMapTemplateTable 1 } HwOntDigitMapTemplateEntry ::= SEQUENCE { hwOntDigitMapTemplateIndex Integer32, hwOntDigitMapTemplateName OCTET STRING, hwOntDigitMapCriticalDialTime Integer32, hwOntDigitMapPartialDialTime Integer32, hwOntDigitMapFormat INTEGER, hwOntDigitMapRowStatus RowStatus, hwOntDigitMapTemplateBindTimes Integer32, hwOntDigitMapRohTime Integer32 } -- 1.3.6.1.4.1.2011.6.36.11.5.1.1 -- 1.3.6.1.4.1.2011.6.36.11.5.1.1 hwOntDigitMapTemplateIndex OBJECT-TYPE SYNTAX Integer32 (-1|1..64) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The profile ID digitmap table." ::= { hwOntDigitMapTemplateEntry 1 } -- 1.3.6.1.4.1.2011.6.36.11.5.1.2 -- 1.3.6.1.4.1.2011.6.36.11.5.1.2 hwOntDigitMapTemplateName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The profile Name digitmap table." ::= { hwOntDigitMapTemplateEntry 2 } -- 1.3.6.1.4.1.2011.6.36.11.5.1.3 -- 1.3.6.1.4.1.2011.6.36.11.5.1.3 hwOntDigitMapCriticalDialTime OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The Critical Dial Time. Default: 4000 Unit: ms " DEFVAL{ 4000 } ::= { hwOntDigitMapTemplateEntry 3 } -- 1.3.6.1.4.1.2011.6.36.11.5.1.4 -- 1.3.6.1.4.1.2011.6.36.11.5.1.4 hwOntDigitMapPartialDialTime OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The Partial Dial Time. Default: 16000 Unit: ms " DEFVAL{ 16000 } ::= { hwOntDigitMapTemplateEntry 4 } -- 1.3.6.1.4.1.2011.6.36.11.5.1.5 -- 1.3.6.1.4.1.2011.6.36.11.5.1.5 hwOntDigitMapFormat OBJECT-TYPE SYNTAX INTEGER { notDefined(1), h248Format(2), nscFormat(3), vendorSpencificFormat(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "The Format of Digitmap. Options: 1. notDefined(1) -indicates the digital format is not defined 2. h248Format(2) -indicates the digital format is h248 3. nscFormat(3) -indicates the digital format is nsc 4. vendorSpencificFormat(4) -indicates the digital format is vendor-spencific Default:h248Format(2)" DEFVAL { h248Format } ::= { hwOntDigitMapTemplateEntry 5 } -- 1.3.6.1.4.1.2011.6.36.11.5.1.6 -- 1.3.6.1.4.1.2011.6.36.11.5.1.6 hwOntDigitMapRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Options: 1.active(1) -indicates active 2.notInService(2) -indicates not in service 3.notReady(3) -indicates not ready 4.createAndGo(4) -indicates create and go 5.createAndWait(5) -indicates create and wait 6.destroy(6) -indicates destroy Only 4 and 6 is support Now." ::= { hwOntDigitMapTemplateEntry 6 } -- 1.3.6.1.4.1.2011.6.36.11.5.1.7 -- 1.3.6.1.4.1.2011.6.36.11.5.1.7 hwOntDigitMapTemplateBindTimes OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The bind time of this profile." ::= { hwOntDigitMapTemplateEntry 7 } -- 1.3.6.1.4.1.2011.6.36.11.5.1.8 -- 1.3.6.1.4.1.2011.6.36.11.5.1.8 hwOntDigitMapRohTime OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The Roh Time. Default: 6 Unit: s " DEFVAL{ 6 } ::= { hwOntDigitMapTemplateEntry 8 } -- 1.3.6.1.4.1.2011.6.36.11.6 -- 1.3.6.1.4.1.2011.6.36.11.6 hwOntDigitMapTemplateTokenTable OBJECT-TYPE SYNTAX SEQUENCE OF HwOntDigitMapTemplateTokenEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The digitmap token table. The indexes of this table are hwOntDigitMapTemplateIndex, hwOntDigitMapTokenId" ::= { hwVoipOntObjects 6 } -- 1.3.6.1.4.1.2011.6.36.11.6.1 -- 1.3.6.1.4.1.2011.6.36.11.6.1 hwOntDigitMapTemplateTokenEntry OBJECT-TYPE SYNTAX HwOntDigitMapTemplateTokenEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The digitmap token table. The indexes of this entry are hwOntDigitMapTemplateIndex, hwOntDigitMapTokenId" INDEX { hwOntDigitMapTemplateIndex, hwOntDigitMapTokenId } ::= { hwOntDigitMapTemplateTokenTable 1 } HwOntDigitMapTemplateTokenEntry ::= SEQUENCE { hwOntDigitMapTokenId Integer32, hwOntDigitMapToken OCTET STRING, hwOntDigitMapTokenRowStatus INTEGER } -- 1.3.6.1.4.1.2011.6.36.11.6.1.1 -- 1.3.6.1.4.1.2011.6.36.11.6.1.1 hwOntDigitMapTokenId OBJECT-TYPE SYNTAX Integer32 (1..200) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The digitmap token Id." ::= { hwOntDigitMapTemplateTokenEntry 1 } -- 1.3.6.1.4.1.2011.6.36.11.6.1.2 -- 1.3.6.1.4.1.2011.6.36.11.6.1.2 hwOntDigitMapToken OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..27)) MAX-ACCESS read-write STATUS current DESCRIPTION "The digitmap token body." ::= { hwOntDigitMapTemplateTokenEntry 2 } -- 1.3.6.1.4.1.2011.6.36.11.6.1.3 -- 1.3.6.1.4.1.2011.6.36.11.6.1.3 hwOntDigitMapTokenRowStatus OBJECT-TYPE SYNTAX INTEGER { active(1), notInservice(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "Options: 1.active(1) -indicates active 2.notInservice(2) -indicates not in service 3.notReady(3) -indicates not ready 4.createAndGo(4) -indicates create and go 5.createAndWait(5) -indicates create and wait 6.destroy(6) -indicates destroy Only 4 and 6 is support Now.." ::= { hwOntDigitMapTemplateTokenEntry 3 } -- 1.3.6.1.4.1.2011.6.36.11.7 -- 1.3.6.1.4.1.2011.6.36.11.7 hwOntGlbMediaAttributeTable OBJECT IDENTIFIER ::= { hwVoipOntObjects 7 } -- 1.3.6.1.4.1.2011.6.36.11.7.1 -- 1.3.6.1.4.1.2011.6.36.11.7.1 hwOntFaxMode OBJECT-TYPE SYNTAX INTEGER { passthru(1), t38(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "fax mode. Options: 1.passthru(1) -indicates the fax mode is passthrough 2.t38(2) -indicates the fax mode is T38 defalut: t38" ::= { hwOntGlbMediaAttributeTable 1 } -- 1.3.6.1.4.1.2011.6.36.11.7.2 -- 1.3.6.1.4.1.2011.6.36.11.7.2 hwOntOrder1stCodec OBJECT-TYPE SYNTAX Integer32 (0..95) MAX-ACCESS read-write STATUS current DESCRIPTION "codec of order 1 defalut: 8" ::= { hwOntGlbMediaAttributeTable 2 } -- 1.3.6.1.4.1.2011.6.36.11.7.3 -- 1.3.6.1.4.1.2011.6.36.11.7.3 hwOntOrder1stPacketPeriod OBJECT-TYPE SYNTAX INTEGER { time10ms(1), time15ms(2), time20ms(3), time25ms(4), time30ms(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "packet period of order 1, Options: 1.time10ms(1) -indicates the packet period is 10ms 2.time15ms(2) -indicates the packet period is 15ms 3.time20ms(3) -indicates the packet period is 20ms 4.time25ms(4) -indicates the packet period is 25ms 5.time30ms(5) -indicates the packet period is 30ms Defalut: time20ms(3)" ::= { hwOntGlbMediaAttributeTable 3 } -- 1.3.6.1.4.1.2011.6.36.11.7.4 -- 1.3.6.1.4.1.2011.6.36.11.7.4 hwOntOrder1stSilenceFlag OBJECT-TYPE SYNTAX INTEGER { off(1), on(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "silence suppression of order 1, Options: 1.off(1) -indicates the silence suppression is off 2.on(2) -indicates the silence suppression is on Defalut: off(1)" ::= { hwOntGlbMediaAttributeTable 4 } -- 1.3.6.1.4.1.2011.6.36.11.7.5 -- 1.3.6.1.4.1.2011.6.36.11.7.5 hwOntOrder2stCodec OBJECT-TYPE SYNTAX Integer32 (0..95) MAX-ACCESS read-write STATUS current DESCRIPTION "codec of order 2, Default: 0" ::= { hwOntGlbMediaAttributeTable 5 } -- 1.3.6.1.4.1.2011.6.36.11.7.6 -- 1.3.6.1.4.1.2011.6.36.11.7.6 hwOntOrder2stPacketPeriod OBJECT-TYPE SYNTAX INTEGER { time10ms(1), time15ms(2), time20ms(3), time25ms(4), time30ms(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "packet period of order 2, Options: 1.time10ms(1) -indicates the packet period is 10ms 2.time15ms(2) -indicates the packet period is 15ms 3.time20ms(3) -indicates the packet period is 20ms 4.time25ms(4) -indicates the packet period is 25ms 5.time30ms(5) -indicates the packet period is 30ms Defalut: time20ms(3)" ::= { hwOntGlbMediaAttributeTable 6 } -- 1.3.6.1.4.1.2011.6.36.11.7.7 -- 1.3.6.1.4.1.2011.6.36.11.7.7 hwOntOrder2stSilenceFlag OBJECT-TYPE SYNTAX INTEGER { off(1), on(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "silence suppression of order 2, Options: 1.off(1) -indicates the silence suppression is off 2.on(2) -indicates the silence suppression is on Defalut: off(1)" ::= { hwOntGlbMediaAttributeTable 7 } -- 1.3.6.1.4.1.2011.6.36.11.7.8 -- 1.3.6.1.4.1.2011.6.36.11.7.8 hwOntOrder3stCodec OBJECT-TYPE SYNTAX Integer32 (0..95) MAX-ACCESS read-write STATUS current DESCRIPTION "codec of order 3, defalut: 18" ::= { hwOntGlbMediaAttributeTable 8 } -- 1.3.6.1.4.1.2011.6.36.11.7.9 -- 1.3.6.1.4.1.2011.6.36.11.7.9 hwOntOrder3stPacketPeriod OBJECT-TYPE SYNTAX INTEGER { time10ms(1), time15ms(2), time20ms(3), time25ms(4), time30ms(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "packet period of order 3. Options: 1.time10ms(1) -indicates the packet period is 10ms 2.time15ms(2) -indicates the packet period is 15ms 3.time20ms(3) -indicates the packet period is 20ms 4.time25ms(4) -indicates the packet period is 25ms 5.time30ms(5) -indicates the packet period is 30ms Defalut: time20ms(3)" ::= { hwOntGlbMediaAttributeTable 9 } -- 1.3.6.1.4.1.2011.6.36.11.7.10 -- 1.3.6.1.4.1.2011.6.36.11.7.10 hwOntOrder3stSilenceFlag OBJECT-TYPE SYNTAX INTEGER { off(1), on(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "silence suppression of order 3. Options: 1.off(1) -indicates the silence suppression is off 2.on(2) -indicates the silence suppression is on Defalut: off(1)" ::= { hwOntGlbMediaAttributeTable 10 } -- 1.3.6.1.4.1.2011.6.36.11.7.11 -- 1.3.6.1.4.1.2011.6.36.11.7.11 hwOntOrder4stCodec OBJECT-TYPE SYNTAX Integer32 (0..95) MAX-ACCESS read-write STATUS current DESCRIPTION "codec of order 4, defalut: 9" ::= { hwOntGlbMediaAttributeTable 11 } -- 1.3.6.1.4.1.2011.6.36.11.7.12 -- 1.3.6.1.4.1.2011.6.36.11.7.12 hwOntOrder4stPacketPeriod OBJECT-TYPE SYNTAX INTEGER { time10ms(1), time15ms(2), time20ms(3), time25ms(4), time30ms(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "packet period of order 4, Options: 1.time10ms(1) -indicates the packet period is 10ms 2.time15ms(2) -indicates the packet period is 15ms 3.time20ms(3) -indicates the packet period is 20ms 4.time25ms(4) -indicates the packet period is 25ms 5.time30ms(5) -indicates the packet period is 30ms Defalut: time20ms(3)" ::= { hwOntGlbMediaAttributeTable 12 } -- 1.3.6.1.4.1.2011.6.36.11.7.13 -- 1.3.6.1.4.1.2011.6.36.11.7.13 hwOntOrder4stSilenceFlag OBJECT-TYPE SYNTAX INTEGER { off(1), on(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "silence suppression of order 4, Options: 1.off(1) -indicates the silence suppression is off 2.on(2) -indicates the silence suppression is on Defalut: off(1)" ::= { hwOntGlbMediaAttributeTable 13 } -- 1.3.6.1.4.1.2011.6.36.11.7.14 -- 1.3.6.1.4.1.2011.6.36.11.7.14 hwOntOobDtmfFlag OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Oob Dtmf Flag, Options: 1.disable(1) -indicates the Oob DTMF is disable 2.enable(2) -indicates the Oob DTMF is enable Defalut: disable(1)" ::= { hwOntGlbMediaAttributeTable 14 } -- 1.3.6.1.4.1.2011.6.36.11.7.15 -- 1.3.6.1.4.1.2011.6.36.11.7.15 hwOntAnnouncementType OBJECT-TYPE SYNTAX INTEGER { silence(1), reordertone(2), fastbusy(3), voiceannouncement(4), none(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "Announcement after off hook time out, Options: 1.silence(1) -indicates play the voice of silence after off hook time out 2.reordertone(2) -indicates play the voice of reorder tone after off hook time out 3.fastbusy(3) -indicates play the voice of fast busy after off hook time out 4.voiceannouncement(4) -indicates play the voice of voiceannouncement after off hook time out 5.none(5) -indicates play none after off hook time out Default: fastbusy(3)" ::= { hwOntGlbMediaAttributeTable 15 } -- 1.3.6.1.4.1.2011.6.36.11.7.16 -- 1.3.6.1.4.1.2011.6.36.11.7.16 hwOntJitterBuffTarget OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "target value of jitter buffer." ::= { hwOntGlbMediaAttributeTable 16 } -- 1.3.6.1.4.1.2011.6.36.11.7.17 -- 1.3.6.1.4.1.2011.6.36.11.7.17 hwOntJitterBuffMax OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "max value of jitter buffer." ::= { hwOntGlbMediaAttributeTable 17 } -- 1.3.6.1.4.1.2011.6.36.11.7.18 -- 1.3.6.1.4.1.2011.6.36.11.7.18 hwOntEchoFlag OBJECT-TYPE SYNTAX INTEGER { off(1), on(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "echo flag. Options: 1.off(1) -indicates the echo flag is off 2.on(2) -indicates the echo flag is on Defalut: on(2)" ::= { hwOntGlbMediaAttributeTable 18 } -- 1.3.6.1.4.1.2011.6.36.11.7.19 -- 1.3.6.1.4.1.2011.6.36.11.7.19 hwOntPstnProtocolVariant OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "country code, means geography location, Options: Indicate the E.164 country code Defalut: 0" ::= { hwOntGlbMediaAttributeTable 19 } -- 1.3.6.1.4.1.2011.6.36.11.7.20 -- 1.3.6.1.4.1.2011.6.36.11.7.20 hwOntPiggybackEventFlag OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "whether process piggyback events or not, Options: 1.disable(1) -indicates don's process piggyback events 2.enable(2) -indicates process piggyback events Defalut: disable(1)" ::= { hwOntGlbMediaAttributeTable 20 } -- 1.3.6.1.4.1.2011.6.36.11.7.21 -- 1.3.6.1.4.1.2011.6.36.11.7.21 hwOntToneEventFlag OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "whether process Tone events or not, Options: 1.disable(1) -indicates don's process Tone events 2.enable(2) -indicates process Tone events Defalut: disable(1)" ::= { hwOntGlbMediaAttributeTable 21 } -- 1.3.6.1.4.1.2011.6.36.11.7.22 -- 1.3.6.1.4.1.2011.6.36.11.7.22 hwOntDtmfEventFlag OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "whether process Dtmf events or not, Options: 1.disable(1) -indicates don's process Dtmf events 2.enable(2) -indicates process Dtmf events Defalut: disable(1)" ::= { hwOntGlbMediaAttributeTable 22 } -- 1.3.6.1.4.1.2011.6.36.11.7.23 -- 1.3.6.1.4.1.2011.6.36.11.7.23 hwOntCasEventFlag OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "whether process cas events or not, Options: 1.disable(1) -indicates don's process cas events 2.enable(2) -indicates process cas events Defalut: disable(1)" ::= { hwOntGlbMediaAttributeTable 23 } -- 1.3.6.1.4.1.2011.6.36.11.8 -- 1.3.6.1.4.1.2011.6.36.11.8 hwOntPstnCTPConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF HwOntPstnCTPConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Pstn CTP Config Table. The indexes of this table are hwVoiceIfIndex, hwVoiceOntIndex, hwVoiceOntPortIndex." ::= { hwVoipOntObjects 8 } -- 1.3.6.1.4.1.2011.6.36.11.8.1 -- 1.3.6.1.4.1.2011.6.36.11.8.1 hwOntPstnCTPConfigEntry OBJECT-TYPE SYNTAX HwOntPstnCTPConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Pstn CTP Config Table. The indexes of this entry are hwVoiceIfIndex, hwVoiceOntIndex, hwVoiceOntPortIndex." INDEX { hwVoiceIfIndex, hwVoiceOntIndex, hwVoiceOntPortIndex } ::= { hwOntPstnCTPConfigTable 1 } HwOntPstnCTPConfigEntry ::= SEQUENCE { hwOntPstnCTPTelNo OCTET STRING, hwOntPstnCTPNewServiceRight BITS, hwOntPstnCTPHotlineUri OCTET STRING, hwOntPstnCTPUsername OCTET STRING, hwOntPstnCTPPassword OCTET STRING, hwOntPotsCTPTemplateIndex Integer32, hwOntPotsCTPTemplateName OCTET STRING, hwOntPstnCTPDigitmapTemplateIndex Integer32, hwOntPstnCTPDigitmapTemplateName OCTET STRING, hwOntPstnCTPSipAgentTemplateIndex Integer32, hwOntPstnCTPSipAgentTemplateName OCTET STRING, hwOntPstnCTPIPIndex Integer32, hwOntPotsAdministrativeState INTEGER, hwOntPotsCTPRowStatus RowStatus } -- 1.3.6.1.4.1.2011.6.36.11.8.1.1 -- 1.3.6.1.4.1.2011.6.36.11.8.1.1 hwOntPstnCTPTelNo OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "POTS user's telephone number of ONT" ::= { hwOntPstnCTPConfigEntry 1 } -- 1.3.6.1.4.1.2011.6.36.11.8.1.2 -- 1.3.6.1.4.1.2011.6.36.11.8.1.2 hwOntPstnCTPNewServiceRight OBJECT-TYPE SYNTAX BITS { callWaiting(0), threeParty(1), callTransfer(2), callHold(3), callPark(4), doNotDisturb(5), conference(6), messageWaitingIndication(7), hotline(8), hotdelay(9) } MAX-ACCESS read-write STATUS current DESCRIPTION "POTS user's service right of ONT. It is valid for GPON ONT and invalid for EPON ONT. Options: 0.callWaiting(0), 1.threeParty(1), 2.callTransfer(2), 3.callHold(3), 4.callPark(4), 5.doNotDisturb(5), 6.conference(6), 7.messageWaitingIndication(7), 8.hotline(8), 9.hotdelay(9) Default: d000" ::= { hwOntPstnCTPConfigEntry 2 } -- 1.3.6.1.4.1.2011.6.36.11.8.1.3 -- 1.3.6.1.4.1.2011.6.36.11.8.1.3 hwOntPstnCTPHotlineUri OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "user's hot line number(URI). It is valid for GPON ONT and invalid for EPON ONT." ::= { hwOntPstnCTPConfigEntry 3 } -- 1.3.6.1.4.1.2011.6.36.11.8.1.4 -- 1.3.6.1.4.1.2011.6.36.11.8.1.4 hwOntPstnCTPUsername OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..50)) MAX-ACCESS read-write STATUS current DESCRIPTION "user's name." ::= { hwOntPstnCTPConfigEntry 4 } -- 1.3.6.1.4.1.2011.6.36.11.8.1.5 -- 1.3.6.1.4.1.2011.6.36.11.8.1.5 hwOntPstnCTPPassword OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..24)) MAX-ACCESS read-write STATUS current DESCRIPTION "user's password." ::= { hwOntPstnCTPConfigEntry 5 } -- 1.3.6.1.4.1.2011.6.36.11.8.1.6 -- 1.3.6.1.4.1.2011.6.36.11.8.1.6 hwOntPotsCTPTemplateIndex OBJECT-TYPE SYNTAX Integer32 (-1|1..64) MAX-ACCESS read-write STATUS current DESCRIPTION "POTS profile index which is bound to POTS user. It is valid for GPON ONT and invalid for EPON ONT." ::= { hwOntPstnCTPConfigEntry 6 } -- 1.3.6.1.4.1.2011.6.36.11.8.1.7 -- 1.3.6.1.4.1.2011.6.36.11.8.1.7 hwOntPotsCTPTemplateName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "POTS profile name which is bound to POTS user. It is valid for GPON ONT and invalid for EPON ONT." ::= { hwOntPstnCTPConfigEntry 7 } -- 1.3.6.1.4.1.2011.6.36.11.8.1.8 -- 1.3.6.1.4.1.2011.6.36.11.8.1.8 hwOntPstnCTPDigitmapTemplateIndex OBJECT-TYPE SYNTAX Integer32 (-1|1..64) MAX-ACCESS read-write STATUS current DESCRIPTION "DigitalMap profile index which is bound to POTS user. If only set digitmap profile(only setting hwOntPstnCTPDigitmapTemplateIndex and hwOntPstnCTPDigitmapTemplateName) for EPON ONT, hwVoiceOntPortIndex is invalid(means that all users of the EPON ONT will be bound to the specify digitmap profile)." ::= { hwOntPstnCTPConfigEntry 8 } -- 1.3.6.1.4.1.2011.6.36.11.8.1.9 -- 1.3.6.1.4.1.2011.6.36.11.8.1.9 hwOntPstnCTPDigitmapTemplateName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "DigitalMap profile name which is bound to POTS user. If only set digitmap profile(only setting hwOntPstnCTPDigitmapTemplateIndex and hwOntPstnCTPDigitmapTemplateName) for EPON ONT, hwVoiceOntPortIndex is invalid(means that all users of the EPON ONT will be bound to the specify digitmap profile)." ::= { hwOntPstnCTPConfigEntry 9 } -- 1.3.6.1.4.1.2011.6.36.11.8.1.10 -- 1.3.6.1.4.1.2011.6.36.11.8.1.10 hwOntPstnCTPSipAgentTemplateIndex OBJECT-TYPE SYNTAX Integer32 (-1|1..64) MAX-ACCESS read-write STATUS current DESCRIPTION "SipAgent profile index which is bound to POTS user." ::= { hwOntPstnCTPConfigEntry 10 } -- 1.3.6.1.4.1.2011.6.36.11.8.1.11 -- 1.3.6.1.4.1.2011.6.36.11.8.1.11 hwOntPstnCTPSipAgentTemplateName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "SipAgent profile name which is bound to POTS user." ::= { hwOntPstnCTPConfigEntry 11 } -- 1.3.6.1.4.1.2011.6.36.11.8.1.12 -- 1.3.6.1.4.1.2011.6.36.11.8.1.12 hwOntPstnCTPIPIndex OBJECT-TYPE SYNTAX Integer32 (-1|0..3) MAX-ACCESS read-write STATUS current DESCRIPTION "IP address index which is bound to POTS user." ::= { hwOntPstnCTPConfigEntry 12 } -- 1.3.6.1.4.1.2011.6.36.11.8.1.13 -- 1.3.6.1.4.1.2011.6.36.11.8.1.13 hwOntPotsAdministrativeState OBJECT-TYPE SYNTAX INTEGER { unlock(1), lock(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Pots' administrative state. Options: 1.unlock(1) -indicates the pots is unlocked 2.lock(2) -indicates the pots is locked Default: unlock(1) " DEFVAL { unlock } ::= { hwOntPstnCTPConfigEntry 13 } -- 1.3.6.1.4.1.2011.6.36.11.8.1.14 -- 1.3.6.1.4.1.2011.6.36.11.8.1.14 hwOntPotsCTPRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "row status. Options: 1.active(1) -indicates active 2.notInService(2) -indicates not in service 3.notReady(3) -indicates not ready 4.createAndGo(4) -indicates create and go 5.createAndWait(5) -indicates create and wait 6.destroy(6) -indicates destroy Only 4 and 6 is support Now." ::= { hwOntPstnCTPConfigEntry 14 } -- 1.3.6.1.4.1.2011.6.36.11.9 -- 1.3.6.1.4.1.2011.6.36.11.9 hwSIPAgentPerformanceMonitorTable OBJECT-TYPE SYNTAX SEQUENCE OF HwSIPAgentPerformanceMonitorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "SIPAgent Performance Monitor Table. The indexes of this table are hwVoiceIfIndex, hwVoiceOntIndex, hwVoiceOntPortIndex." ::= { hwVoipOntObjects 9 } -- 1.3.6.1.4.1.2011.6.36.11.9.1 -- 1.3.6.1.4.1.2011.6.36.11.9.1 hwSIPAgentPerformanceMonitorEntry OBJECT-TYPE SYNTAX HwSIPAgentPerformanceMonitorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "SIPAgent Performance Monitor Table. The indexes of this entry are hwVoiceIfIndex, hwVoiceOntIndex, hwVoiceOntPortIndex." INDEX { hwVoiceIfIndex, hwVoiceOntIndex, hwVoiceOntPortIndex } ::= { hwSIPAgentPerformanceMonitorTable 1 } HwSIPAgentPerformanceMonitorEntry ::= SEQUENCE { hwSIPAgentTransactions Integer32, hwSIPAgentRxInviteReqs Integer32, hwSIPAgentRxInviteRetrans Integer32, hwSIPAgentRxNoninviteReqs Integer32, hwSIPAgentRxNoninviteRetrans Integer32, hwSIPAgentRxResponse Integer32, hwSIPAgentRxResponseRetransmissions Integer32, hwSIPAgentTxInviteReqs Integer32, hwSIPAgentTxInviteRetrans Integer32, hwSIPAgentTxNoninviteReqs Integer32, hwSIPAgentTxNoninviteRetrans Integer32, hwSIPAgentTxResponse Integer32, hwSIPAgentTxResponseRetransmissions Integer32 } -- 1.3.6.1.4.1.2011.6.36.11.9.1.1 -- 1.3.6.1.4.1.2011.6.36.11.9.1.1 hwSIPAgentTransactions OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute counts the number of new transactions that were initiated." ::= { hwSIPAgentPerformanceMonitorEntry 1 } -- 1.3.6.1.4.1.2011.6.36.11.9.1.2 -- 1.3.6.1.4.1.2011.6.36.11.9.1.2 hwSIPAgentRxInviteReqs OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute counts received invite messages, including retransmissions." ::= { hwSIPAgentPerformanceMonitorEntry 2 } -- 1.3.6.1.4.1.2011.6.36.11.9.1.3 -- 1.3.6.1.4.1.2011.6.36.11.9.1.3 hwSIPAgentRxInviteRetrans OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute counts received invite retransmission messages." ::= { hwSIPAgentPerformanceMonitorEntry 3 } -- 1.3.6.1.4.1.2011.6.36.11.9.1.4 -- 1.3.6.1.4.1.2011.6.36.11.9.1.4 hwSIPAgentRxNoninviteReqs OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute counts received non-invite messages, including retransmissions." ::= { hwSIPAgentPerformanceMonitorEntry 4 } -- 1.3.6.1.4.1.2011.6.36.11.9.1.5 -- 1.3.6.1.4.1.2011.6.36.11.9.1.5 hwSIPAgentRxNoninviteRetrans OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute counts received non-invite retransmission messages." ::= { hwSIPAgentPerformanceMonitorEntry 5 } -- 1.3.6.1.4.1.2011.6.36.11.9.1.6 -- 1.3.6.1.4.1.2011.6.36.11.9.1.6 hwSIPAgentRxResponse OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute counts total responses received." ::= { hwSIPAgentPerformanceMonitorEntry 6 } -- 1.3.6.1.4.1.2011.6.36.11.9.1.7 -- 1.3.6.1.4.1.2011.6.36.11.9.1.7 hwSIPAgentRxResponseRetransmissions OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute counts total response retransmissions received." ::= { hwSIPAgentPerformanceMonitorEntry 7 } -- 1.3.6.1.4.1.2011.6.36.11.9.1.8 -- 1.3.6.1.4.1.2011.6.36.11.9.1.8 hwSIPAgentTxInviteReqs OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute counts transmitted invite messages, including retransmissions." ::= { hwSIPAgentPerformanceMonitorEntry 8 } -- 1.3.6.1.4.1.2011.6.36.11.9.1.9 -- 1.3.6.1.4.1.2011.6.36.11.9.1.9 hwSIPAgentTxInviteRetrans OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute counts transmitted invite retransmission messages." ::= { hwSIPAgentPerformanceMonitorEntry 9 } -- 1.3.6.1.4.1.2011.6.36.11.9.1.10 -- 1.3.6.1.4.1.2011.6.36.11.9.1.10 hwSIPAgentTxNoninviteReqs OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute counts transmitted non-invite messages, including retransmissions." ::= { hwSIPAgentPerformanceMonitorEntry 10 } -- 1.3.6.1.4.1.2011.6.36.11.9.1.11 -- 1.3.6.1.4.1.2011.6.36.11.9.1.11 hwSIPAgentTxNoninviteRetrans OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute counts transmitted non-invite retransmission messages." ::= { hwSIPAgentPerformanceMonitorEntry 11 } -- 1.3.6.1.4.1.2011.6.36.11.9.1.12 -- 1.3.6.1.4.1.2011.6.36.11.9.1.12 hwSIPAgentTxResponse OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute counts the total responses sent." ::= { hwSIPAgentPerformanceMonitorEntry 12 } -- 1.3.6.1.4.1.2011.6.36.11.9.1.13 -- 1.3.6.1.4.1.2011.6.36.11.9.1.13 hwSIPAgentTxResponseRetransmissions OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute counts total response retransmissions sent." ::= { hwSIPAgentPerformanceMonitorEntry 13 } -- 1.3.6.1.4.1.2011.6.36.11.10 -- 1.3.6.1.4.1.2011.6.36.11.10 hwSIPCallPerformanceMonitorTable OBJECT-TYPE SYNTAX SEQUENCE OF HwSIPCallPerformanceMonitorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "SIP Call Performance Monitor Table. The indexes of this table are hwVoiceIfIndex, hwVoiceOntIndex, hwVoiceOntPortIndex." ::= { hwVoipOntObjects 10 } -- 1.3.6.1.4.1.2011.6.36.11.10.1 -- 1.3.6.1.4.1.2011.6.36.11.10.1 hwSIPCallPerformanceMonitorEntry OBJECT-TYPE SYNTAX HwSIPCallPerformanceMonitorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "SIP Call Performance Monitor Table. The indexes of this entry are hwVoiceIfIndex, hwVoiceOntIndex, hwVoiceOntPortIndex." INDEX { hwVoiceIfIndex, hwVoiceOntIndex, hwVoiceOntPortIndex } ::= { hwSIPCallPerformanceMonitorTable 1 } HwSIPCallPerformanceMonitorEntry ::= SEQUENCE { hwSIPCallFailedToConnectCounter Integer32, hwSIPCallFailedToValidateCounter Integer32, hwSIPCallTimeoutCounter Integer32, hwSIPCallFailedReceivedCounter Integer32, hwSIPCallFailedToAuthenticateCounter Integer32 } -- 1.3.6.1.4.1.2011.6.36.11.10.1.1 -- 1.3.6.1.4.1.2011.6.36.11.10.1.1 hwSIPCallFailedToConnectCounter OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute counts the number of times the SIP UA failed to reach/connect its TCP/UDP peer during SIP call initiations." ::= { hwSIPCallPerformanceMonitorEntry 1 } -- 1.3.6.1.4.1.2011.6.36.11.10.1.2 -- 1.3.6.1.4.1.2011.6.36.11.10.1.2 hwSIPCallFailedToValidateCounter OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute counts the number of times the SIP UA failed to validate its peer during SIP call initiations." ::= { hwSIPCallPerformanceMonitorEntry 2 } -- 1.3.6.1.4.1.2011.6.36.11.10.1.3 -- 1.3.6.1.4.1.2011.6.36.11.10.1.3 hwSIPCallTimeoutCounter OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute counts the number of times the SIP UA timed out during SIP call initiations." ::= { hwSIPCallPerformanceMonitorEntry 3 } -- 1.3.6.1.4.1.2011.6.36.11.10.1.4 -- 1.3.6.1.4.1.2011.6.36.11.10.1.4 hwSIPCallFailedReceivedCounter OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute counts the number of times the SIP UA received a failure error code during SIP call initiations." ::= { hwSIPCallPerformanceMonitorEntry 4 } -- 1.3.6.1.4.1.2011.6.36.11.10.1.5 -- 1.3.6.1.4.1.2011.6.36.11.10.1.5 hwSIPCallFailedToAuthenticateCounter OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute counts the number of times the SIP UA failed to authenticate itself during SIP call initiations." ::= { hwSIPCallPerformanceMonitorEntry 5 } -- 1.3.6.1.4.1.2011.6.36.11.11 -- 1.3.6.1.4.1.2011.6.36.11.11 hwOntPstnCallerEmulateOprTable OBJECT-TYPE SYNTAX SEQUENCE OF HwOntPstnCallerEmulateOprEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ont caller emulate test table. The indexes of this table are hwVoiceIfIndex, hwVoiceOntIndex, hwVoiceOntPortIndex." ::= { hwVoipOntObjects 11 } -- 1.3.6.1.4.1.2011.6.36.11.11.1 -- 1.3.6.1.4.1.2011.6.36.11.11.1 hwOntPstnCallerEmulateOprEntry OBJECT-TYPE SYNTAX HwOntPstnCallerEmulateOprEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ont caller emulate test table. The indexes of this entry are hwVoiceIfIndex, hwVoiceOntIndex, hwVoiceOntPortIndex." INDEX { hwVoiceIfIndex, hwVoiceOntIndex, hwVoiceOntPortIndex } ::= { hwOntPstnCallerEmulateOprTable 1 } HwOntPstnCallerEmulateOprEntry ::= SEQUENCE { hwOntPstnCallerEmulateOprType INTEGER, hwOntPstnCallerEmulateCalledTelNo OCTET STRING, hwOntPstnCallerEmulateTestStatus INTEGER, hwOntPstnCallerEmulateTestResult INTEGER, hwOntPstnCallerEmulateTestHoldTime Integer32, hwOntPstnCallerEmulateReportTelNo OCTET STRING, hwOntPstnCallerEmulateErrorCode Integer32, hwOntPstnCallerEmulateTestRequestID Integer32 } -- 1.3.6.1.4.1.2011.6.36.11.11.1.1 -- 1.3.6.1.4.1.2011.6.36.11.11.1.1 hwOntPstnCallerEmulateOprType OBJECT-TYPE SYNTAX INTEGER { stop(1), start(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Operation type Options: 1.stop(1) -indicates that stop test; 2.start(2) -indicates that start test" ::= { hwOntPstnCallerEmulateOprEntry 1 } -- 1.3.6.1.4.1.2011.6.36.11.11.1.2 -- 1.3.6.1.4.1.2011.6.36.11.11.1.2 hwOntPstnCallerEmulateCalledTelNo OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Called telephone number" ::= { hwOntPstnCallerEmulateOprEntry 2 } -- 1.3.6.1.4.1.2011.6.36.11.11.1.3 -- 1.3.6.1.4.1.2011.6.36.11.11.1.3 hwOntPstnCallerEmulateTestStatus OBJECT-TYPE SYNTAX INTEGER{startSuccessfully(1),stopSuccessfully(2), sendDTMFSuccessfully(3), testOuttime(4), noDialtone(5), callerDialNumberAlready(6), noRinging(7), noRingbackTone(8), waitingAgentMessageOuttime(9), testingFailure(10), agentMessageAck(11),calledoffhook(12),testingAbnormal(13),broadbandtesting(14), capturefail(15),notratb(16),configsuccessfully(17), ring(18), calleroffhook(19), playdialtone(20), dialnumbercomplete(21),idle(22),receiving(23), ringingBack(24), connect(25), busyTone(26), onHook(27), testEnd(28), other(255)} MAX-ACCESS read-only STATUS current DESCRIPTION "Test Status. Options: 1. startSuccessfully(1) -indicates start test successfully 2. stopSuccessfully(2) -indicates stop test successfully 3. sendDTMFSuccessfully(3) -indicates send DTMF successfully 4. testOuttime(4) -indicates test is time out 5. noDialtone(5) -indicates no dial tone 6. callerDialNumberAlready(6) -indicates that caller already dials a number 7. noRinging(7) -indicates on ringing 8. noRingbackTone(8) -indicates no ring back tone 9. waitingAgentMessageOuttime(9) -indicates that timed-out (waiting for EMS processing) 10. testingFailure(10) -indicates that test failure 11. agentMessageAck(11) -indicates that host responds to the EMS 12. calledoffhook(12) -indicates that off hook (called party) 13. testingAbnormal(13) -indicates test is abnormal 14. broadbandtesting(14) -indicates capture fail 15. capturefail(15) -indicates that line capture failure 16. notratb(16) -indicates that relay transfer board does not exist 17. configsuccessfully(17) -indicates configure successfully 18. ring(18) -indicates ringing 19. calleroffhook(19) -indicates that off hook (calling party) 20. playdialtone(20) -indicates that play the dial tone 21. dialnumbercomplete(21) -indicates that dialup is finished 22. idle(22) -indicates idle 23. receiving(23) -indicates receiving 24. ringingBack(24) -indicates ringing back 25. connect(25) -indicates that off hook (called party) 26. busyTone(26) -indicates busy tone 27. onHook(27) -indicates on hook 28. testEnd(28) -indicates that test is end 29. other(255) -other " ::= { hwOntPstnCallerEmulateOprEntry 3 } -- 1.3.6.1.4.1.2011.6.36.11.11.1.4 -- 1.3.6.1.4.1.2011.6.36.11.11.1.4 hwOntPstnCallerEmulateTestResult OBJECT-TYPE SYNTAX INTEGER{callerNoDialogTone(1), callerOffHookingBusy(2), callerDialogingBusy(3), callerNoDialog(4), callerDialogedBusy(5), callerDialogedNoTalk(6), callRelease(7), matchNoCompleted(8), sendNoCompleted(9), testSucceed(10), callerMatchFailed(11),notReceiveSSOffhookSignal(12), dialNumberNotCompared(13), backToneNotReceived(14), chanelCreateFailed(15), ssNoResponseHookSignal(16), other(255)} MAX-ACCESS read-only STATUS current DESCRIPTION "Test Result. Options: 1. callerNoDialogTone(1) -indicates that the caller has no dialog tone 2. callerOffHookingBusy(2) -indicates that the caller is offhooking busy 3. callerDialogingBusy(3) -indicates that the caller is dialog busy 4. callerNoDialog(4) -indicates that the caller has no dialog 5. callerDialogedBusy(5) -indicates that the caller is dialoged busy 6. callerDialogedNoTalk(6) -indicates that the caller is dialoged not talk 7. callRelease(7) -indicates the call is released 8. matchNoCompleted(8) -indicates the match is not completed 9. sendNoCompleted(9) -indicates the send is not completed 10. testSucceed(10) -indicates the test succeed 11. callerMatchFailed(11) -indicates the caller match failed 12. notReceiveSSOffhookSignal(12) -indicates not receive off hook signal 13. dialNumberNotCompared(13) -indicates the dial number is not compared 14. backToneNotReceived(14) -indicates the back tone has not received 15. chanelCreateFailed(15) -indicates the channel create failed 16. ssNoResponseHookSignal(16) -indicates SS do not response a hook signal 17. other(255) -other " ::= { hwOntPstnCallerEmulateOprEntry 4 } -- 1.3.6.1.4.1.2011.6.36.11.11.1.5 -- 1.3.6.1.4.1.2011.6.36.11.11.1.5 hwOntPstnCallerEmulateTestHoldTime OBJECT-TYPE SYNTAX Integer32 (1..600) MAX-ACCESS read-write STATUS current DESCRIPTION " Caller Emulate test hold time, the test will auto ended when this time out. " ::= { hwOntPstnCallerEmulateOprEntry 5 } -- 1.3.6.1.4.1.2011.6.36.11.11.1.6 -- 1.3.6.1.4.1.2011.6.36.11.11.1.6 hwOntPstnCallerEmulateReportTelNo OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..32)) MAX-ACCESS read-only STATUS current DESCRIPTION " The actual called number string checked and send to MGC or IMS. " ::= { hwOntPstnCallerEmulateOprEntry 6 } -- 1.3.6.1.4.1.2011.6.36.11.11.1.7 -- 1.3.6.1.4.1.2011.6.36.11.11.1.7 hwOntPstnCallerEmulateErrorCode OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Error code" ::= { hwOntPstnCallerEmulateOprEntry 7 } hwOntPstnCallerEmulateTestRequestID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Request ID" ::= { hwOntPstnCallerEmulateOprEntry 8 } -- 1.3.6.1.4.1.2011.6.36.11.12 -- 1.3.6.1.4.1.2011.6.36.11.12 hwOntPstnCalledEmulateOprTable OBJECT-TYPE SYNTAX SEQUENCE OF HwOntPstnCalledEmulateOprEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ont called emulate test table. The indexes of this table are hwVoiceIfIndex, hwVoiceOntIndex, hwVoiceOntPortIndex" ::= { hwVoipOntObjects 12 } -- 1.3.6.1.4.1.2011.6.36.11.12.1 -- 1.3.6.1.4.1.2011.6.36.11.12.1 hwOntPstnCalledEmulateOprEntry OBJECT-TYPE SYNTAX HwOntPstnCalledEmulateOprEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ont called emulate test table. The indexes of this entry are hwVoiceIfIndex, hwVoiceOntIndex, hwVoiceOntPortIndex" INDEX { hwVoiceIfIndex, hwVoiceOntIndex, hwVoiceOntPortIndex } ::= { hwOntPstnCalledEmulateOprTable 1 } HwOntPstnCalledEmulateOprEntry ::= SEQUENCE { hwOntPstnCalledEmulateOprType INTEGER, hwOntPstnCalledEmulateTestStatus INTEGER, hwOntPstnCalledEmulateTestResult INTEGER, hwOntPstnCalledEmulateTestHoldTime Integer32, hwOntPstnCalledEmulateTestRequestID Integer32 } -- 1.3.6.1.4.1.2011.6.36.11.12.1.1 -- 1.3.6.1.4.1.2011.6.36.11.12.1.1 hwOntPstnCalledEmulateOprType OBJECT-TYPE SYNTAX INTEGER { stop(1), start(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Operation type . Options: 1. stop(1) -Stop test 2. start(2) -Start test " ::= { hwOntPstnCalledEmulateOprEntry 1 } -- 1.3.6.1.4.1.2011.6.36.11.12.1.2 -- 1.3.6.1.4.1.2011.6.36.11.12.1.2 hwOntPstnCalledEmulateTestStatus OBJECT-TYPE SYNTAX INTEGER{startSuccessfully(1),stopSuccessfully(2), sendDTMFSuccessfully(3), testOuttime(4), noDialtone(5), callerDialNumberAlready(6), noRinging(7), noRingbackTone(8), waitingAgentMessageOuttime(9), testingFailure(10), agentMessageAck(11),calledoffhook(12), testingAbnormal(13),broadbandtesting(14),capturefail(15),notratb(16),configsuccessfully(17), ring(18),calleroffhook(19),playdialtone(20),dialnumbercomplete(21),onHook(22), testEnd(23), connected(24), other(255)} MAX-ACCESS read-only STATUS current DESCRIPTION "Test Status. Options: 1. startSuccessfully(1) -indicates start test successfully 2. stopSuccessfully(2) -indicates stop test successfully 3. sendDTMFSuccessfully(3) -indicates send DTMF successfully 4. testOuttime(4) -indicates test is time out 5. noDialtone(5) -indicates no dial tone 6. callerDialNumberAlready(6) -indicates that caller already dials a number 7. noRinging(7) -indicates on ringing 8. noRingbackTone(8) -indicates no ring back tone 9. waitingAgentMessageOuttime(9) -indicates that timed-out (waiting for EMS processing) 10. testingFailure(10) -indicates that test failure 11. agentMessageAck(11) -indicates that host responds to the EMS 12. calledoffhook(12) -indicates that off hook (called party) 13. testingAbnormal(13) -indicates test is abnormal 14. broadbandtesting(14) -indicates capture fail 15. capturefail(15) -indicates that line capture failure 16. notratb(16) -indicates that relay transfer board does not exist 17. configsuccessfully(17) -indicates configure successfully 18. ring(18) -indicates ringing 19. calleroffhook(19) -indicates that off hook (calling party) 20. playdialtone(20) -indicates that play the dial tone 21. dialnumbercomplete(21) -indicates that dialup is finished 22. onHook(22) -indicates on hook 23. testEnd(23) -indicates that test is end 24. connected(24) -indicates that off hook (called party) 25. other(255) -other " ::= { hwOntPstnCalledEmulateOprEntry 2 } -- 1.3.6.1.4.1.2011.6.36.11.12.1.3 -- 1.3.6.1.4.1.2011.6.36.11.12.1.3 hwOntPstnCalledEmulateTestResult OBJECT-TYPE SYNTAX INTEGER{calledNoRing(1),calledNoOffHook(2), calledOffHookingBusy(3), calledNoTalk(4), callRelease(5),matchNoCompleted(6), sendNoCompleted(7), testSucceed(8), calledMatchFailed(9),mGInsideReason(10), other(255)} MAX-ACCESS read-only STATUS current DESCRIPTION "Test Result. Options: 1. calledNoRing(1) -indicates that the called does not ring 2. calledNoOffHook(2) -indicates that the called does not off hook 3. calledOffHookingBusy(3) -indicates that the called is offhooking busy 4. calledNoTalk(4) -indicates that the called does not talk 5. callRelease(5) -indicates the call is released 6. matchNoCompleted(6) -indicates the match is not completed 7. sendNoCompleted(7) -indicates the send is not completed 8. testSucceed(8) -indicates the test succeed 9. calledMatchFailed(9) -indicates the caller match failed 10. mGInsideReason(10) -indicates the MG inside reason 11. other(255) -other " ::= { hwOntPstnCalledEmulateOprEntry 3 } -- 1.3.6.1.4.1.2011.6.36.11.12.1.4 -- 1.3.6.1.4.1.2011.6.36.11.12.1.4 hwOntPstnCalledEmulateTestHoldTime OBJECT-TYPE SYNTAX Integer32 (1..600) MAX-ACCESS read-write STATUS current DESCRIPTION " Called Emulate test hold time, the test will auto ended when this time out. " ::= { hwOntPstnCalledEmulateOprEntry 4 } hwOntPstnCalledEmulateTestRequestID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " Request ID " ::= { hwOntPstnCalledEmulateOprEntry 5 } -- 1.3.6.1.4.1.2011.6.36.11.13 -- 1.3.6.1.4.1.2011.6.36.11.13 hwOntVsqmWorstHistoryStatisticTable OBJECT-TYPE SYNTAX SEQUENCE OF HwOntVsqmWorstHistoryStatisticEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ont port qos query table. The indexes of this table are hwVoiceIfIndex, hwVoiceOntIndex, hwVoiceOntPortIndex, hwOntVsqmStatisticIndex" ::= { hwVoipOntObjects 13 } -- 1.3.6.1.4.1.2011.6.36.11.13.1 -- 1.3.6.1.4.1.2011.6.36.11.13.1 hwOntVsqmWorstHistoryStatisticEntry OBJECT-TYPE SYNTAX HwOntVsqmWorstHistoryStatisticEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ont port qos query table. The indexes of this entry are hwVoiceIfIndex, hwVoiceOntIndex, hwVoiceOntPortIndex, hwOntVsqmStatisticIndex" INDEX { hwVoiceIfIndex, hwVoiceOntIndex, hwVoiceOntPortIndex, hwOntVsqmStatisticIndex} ::= { hwOntVsqmWorstHistoryStatisticTable 1 } HwOntVsqmWorstHistoryStatisticEntry ::= SEQUENCE { hwOntVsqmStatisticIndex Integer32, hwOntVsqmStatisticDateTime Unsigned32, hwOntVsqmTotalReceivePacketNum Unsigned32, hwOntVsqmTotalSendPacketNum Unsigned32, hwOntVsqmMeanLoopDelay Integer32, hwOntVsqmMeanJitter Integer32, hwOntVsqmPacketLossRate Integer32 } -- 1.3.6.1.4.1.2011.6.36.11.13.1.1 -- 1.3.6.1.4.1.2011.6.36.11.13.1.1 hwOntVsqmStatisticIndex OBJECT-TYPE SYNTAX Integer32 (0..9) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the index" ::= { hwOntVsqmWorstHistoryStatisticEntry 1 } -- 1.3.6.1.4.1.2011.6.36.11.13.1.2 -- 1.3.6.1.4.1.2011.6.36.11.13.1.2 hwOntVsqmStatisticDateTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the Statistic Date Time." ::= { hwOntVsqmWorstHistoryStatisticEntry 2 } -- 1.3.6.1.4.1.2011.6.36.11.13.1.3 -- 1.3.6.1.4.1.2011.6.36.11.13.1.3 hwOntVsqmTotalReceivePacketNum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the total receive packet number." ::= { hwOntVsqmWorstHistoryStatisticEntry 3 } -- 1.3.6.1.4.1.2011.6.36.11.13.1.4 -- 1.3.6.1.4.1.2011.6.36.11.13.1.4 hwOntVsqmTotalSendPacketNum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the total send packet number." ::= { hwOntVsqmWorstHistoryStatisticEntry 4 } -- 1.3.6.1.4.1.2011.6.36.11.13.1.5 -- 1.3.6.1.4.1.2011.6.36.11.13.1.5 hwOntVsqmMeanLoopDelay OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the mean Loop Delay. Unit: millisecond " ::= { hwOntVsqmWorstHistoryStatisticEntry 5 } -- 1.3.6.1.4.1.2011.6.36.11.13.1.6 -- 1.3.6.1.4.1.2011.6.36.11.13.1.6 hwOntVsqmMeanJitter OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the Mean Network Jitter. Unit: millisecond " ::= { hwOntVsqmWorstHistoryStatisticEntry 6 } -- 1.3.6.1.4.1.2011.6.36.11.13.1.7 -- 1.3.6.1.4.1.2011.6.36.11.13.1.7 hwOntVsqmPacketLossRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the Packet Loss Rate in the interval. Unit: 1/100 " ::= { hwOntVsqmWorstHistoryStatisticEntry 7 } hwOntPotsStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF HwOntPotsStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table is used to display ptp and the ctp status of the ont The indexes of this table are hwVoiceIfIndex, hwVoiceOntIndex,hwVoiceOntPortIndex" ::= { hwVoipOntObjects 14 } hwOntPotsStatusEntry OBJECT-TYPE SYNTAX HwOntPotsStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table is used to display ptp and the ctp status of the ont The indexes of this entry are hwVoiceIfIndex, hwVoiceOntIndex,hwVoiceOntPortIndex" INDEX { hwVoiceIfIndex, hwVoiceOntIndex, hwVoiceOntPortIndex } ::= { hwOntPotsStatusTable 1 } HwOntPotsStatusEntry ::= SEQUENCE { hwOntPotsPtpAdmState Integer32, hwOntPotsCtpSrvType Integer32, hwOntPotsHookState Integer32, hwOntPotsCallState Integer32, hwOntPotsCtpSrvState Integer32, hwOntPotsCodec Integer32 } hwOntPotsPtpAdmState OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute reports the current administrative state of a VoIP POTS port.Code points are assigned as follows: 0: unlock 1: lock The others means invaild. " ::= { hwOntPotsStatusEntry 1 } hwOntPotsCtpSrvType OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute reports the current state of a VoIP POTS port session.Code points are assigned as follows: 0: idle/none 1: 2way 2: 3way 3: fax 4: telem 5: conference The others means invaild. " ::= { hwOntPotsStatusEntry 2 } hwOntPotsHookState OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the current state of the subscriber line.Code points are assigned as follows: 0: onhook, 1: offhook The others means invaild. " ::= { hwOntPotsStatusEntry 3 } hwOntPotsCallState OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute reports the POTS call status.Code points are assigned as follows: 0: Registering 1: Idle,on-hook 2: Off-hook 3: Dialing 4: Ringing 5: RingBack 6: Connecting 7: Connected 8: Disconnecting 9: Failed Registration 10: Deactivated 0xFF: Fault The others means invaild. " ::= { hwOntPotsStatusEntry 4 } hwOntPotsCtpSrvState OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute reports the POTS service status. Code points are assigned as follows: 0: endLocal(out of service by local) 1: endRemote(out of service by remote without user) 2: endAuto(out of service by remote fault) 3: normal(In service) The others means invaild. " ::= { hwOntPotsStatusEntry 5 } hwOntPotsCodec OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Reports the current codec used for a VoIP POTS port.Code points are assigned as follows: 0: G.711A 1: G.729 2: G.711U 3: G.723 4: G.726 5: T.38 6: G.722 7: reserved 8: reserved 9: GSM 10: DVI4, 8 kHz 11: DVI4, 16 kHz 12: LPC 13: L16, 2 channels 14: L16, 1 channel 15: QCELP 16: CN 17: MPA 18: G.728 29: DVI4,11.025kHz 20: DVI4,22.050kHz The others means invaild. " ::= { hwOntPotsStatusEntry 6 } hwOntMgVagTable OBJECT-TYPE SYNTAX SEQUENCE OF HwOntMgVagEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Ont H248 and MGCP interface table. The indexes of this table are hwOntMgVagIfIndex,hwOntMgVagOntIndex,hwOntMgVagMgId" ::= { hwVoipOntObjects 15 } hwOntMgVagEntry OBJECT-TYPE SYNTAX HwOntMgVagEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Ont H248 and MGCP interface table. The indexes of this entry are hwOntMgVagIfIndex,hwOntMgVagOntIndex,hwOntMgVagMgId" INDEX { hwOntMgVagIfIndex,hwOntMgVagOntIndex,hwOntMgVagMgId } ::= { hwOntMgVagTable 1 } HwOntMgVagEntry ::= SEQUENCE { hwOntMgVagIfIndex Unsigned32, hwOntMgVagOntIndex Integer32, hwOntMgVagMgId Integer32, hwOntMgVagIpIndex Integer32, hwOntMgVagPrimaryMgc OCTET STRING, hwOntMgVagPrimaryMgcPort Integer32, hwOntMgVagSecondaryMgc OCTET STRING, hwOntMgVagSecondaryMgcPort Integer32, hwOntMgVagMinPort Integer32, hwOntMgVagMaxPort Integer32, hwOntMgVagMediaDscp Integer32, hwOntMgVagSignalPort Integer32, hwOntMgVagSignalDscp Integer32, hwOntMgVagMidType INTEGER, hwOntMgVagMid OCTET STRING, hwOntMgVagMessageFormat INTEGER, hwOntMgVagVersion INTEGER, hwOntMgVagTidBase OCTET STRING, hwOntMgVagHeartbeatMode INTEGER, hwOntMgVagHeartbeatCycle Integer32, hwOntMgVagHeartbeatCount Integer32, hwOntMgVagTidNumber Integer32, hwOntMgVagTidPrefix OCTET STRING, hwOntMgVagTidMode INTEGER, hwOntMgVagTidDigitBegin Integer32, hwOntMgVagTidDigitLength Integer32, hwOntMgVagRowStatus RowStatus, hwOntMgProtocolType INTEGER } hwOntMgVagIfIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifindex of xPON port." ::= { hwOntMgVagEntry 1 } hwOntMgVagOntIndex OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ONT index." ::= { hwOntMgVagEntry 2 } hwOntMgVagMgId OBJECT-TYPE SYNTAX Integer32 (1..32) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MG ID." ::= { hwOntMgVagEntry 3 } hwOntMgVagIpIndex OBJECT-TYPE SYNTAX Integer32 (0..3) MAX-ACCESS read-write STATUS current DESCRIPTION "The IP index." ::= { hwOntMgVagEntry 4 } hwOntMgVagPrimaryMgc OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "Primary mgc." ::= { hwOntMgVagEntry 5 } hwOntMgVagPrimaryMgcPort OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The port of primary mgc." ::= { hwOntMgVagEntry 6 } hwOntMgVagSecondaryMgc OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "Secondary mgc." ::= { hwOntMgVagEntry 7 } hwOntMgVagSecondaryMgcPort OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The port of secondary mgc." ::= { hwOntMgVagEntry 8 } hwOntMgVagMinPort OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The min udp port of media rtp. It is valid for GPON ONT and invalid for EPON ONT." ::= { hwOntMgVagEntry 9 } hwOntMgVagMaxPort OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The max udp port of media rtp. It is valid for GPON ONT and invalid for EPON ONT." ::= { hwOntMgVagEntry 10 } hwOntMgVagMediaDscp OBJECT-TYPE SYNTAX Integer32 (0..63) MAX-ACCESS read-write STATUS current DESCRIPTION "The DSCP of media RTP. It is valid for GPON ONT and invalid for EPON ONT." ::= { hwOntMgVagEntry 11 } hwOntMgVagSignalPort OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The udp port of signal. It is valid for GPON ONT and invalid for EPON ONT." ::= { hwOntMgVagEntry 12 } hwOntMgVagSignalDscp OBJECT-TYPE SYNTAX Integer32 (0..63) MAX-ACCESS read-write STATUS current DESCRIPTION "The DSCP of signal. It is valid for GPON ONT and invalid for EPON ONT." ::= { hwOntMgVagEntry 13 } hwOntMgVagMidType OBJECT-TYPE SYNTAX INTEGER { ip4Address(1), domainName(2), deviceName(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The MID type of the MG message, just used by H248. Options: 1.ip4Address(1) -indicates the MID type is ip4Address 2.domainName(2) -indicates the MID type is domainName 3.deviceName(3) -indicates the MID type is deviceName " ::= { hwOntMgVagEntry 14 } hwOntMgVagMid OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "The name of the MG device." ::= { hwOntMgVagEntry 15 } hwOntMgVagMessageFormat OBJECT-TYPE SYNTAX INTEGER { textLong(1), textShort(2), binary(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The message format of MG interface, just used by H248. It is valid for GPON ONT and invalid for EPON ONT. Options: 1.textLong(1) -indicates the message format of MG interface is text-long 2.textShort(2) -indicates the message format of MG interface is text-short 3.binary(3) -indicates the message format of MG interface is binary " ::= { hwOntMgVagEntry 16 } hwOntMgVagVersion OBJECT-TYPE SYNTAX INTEGER { ontDefault(1), v1(2), v2(3), v3(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "The H.248 version of MG interface, just used by H248. It is valid for GPON ONT and invalid for EPON ONT. Options: 1.ontDefault(1) -indicates the H.248 version of MG interface is ont-default 2.v1(2) -indicates the H.248 version of MG interface is v1 3.v2(3) -indicates the H.248 version of MG interface is v2 4.v3(4) -indicates the H.248 version of MG interface is v3 " ::= { hwOntMgVagEntry 17 } hwOntMgVagTidBase OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..24)) MAX-ACCESS read-write STATUS current DESCRIPTION "The base string for the H.248 physical tid." ::= { hwOntMgVagEntry 18 } hwOntMgVagHeartbeatMode OBJECT-TYPE SYNTAX INTEGER { disable(1), notifyMethod(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The heartbeat mode. Options: 1.disable(1) -indicates the heartbeat mode is disable 2.notifyMethod(2) -indicates the heartbeat mode is notify-method " ::= { hwOntMgVagEntry 19 } hwOntMgVagHeartbeatCycle OBJECT-TYPE SYNTAX Integer32 (5..655) MAX-ACCESS read-write STATUS current DESCRIPTION "The heartbeat cycle." ::= { hwOntMgVagEntry 20 } hwOntMgVagHeartbeatCount OBJECT-TYPE SYNTAX Integer32 (1..20) MAX-ACCESS read-write STATUS current DESCRIPTION "The heartbeat count." ::= { hwOntMgVagEntry 21 } hwOntMgVagTidNumber OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The rtp tid number." ::= { hwOntMgVagEntry 22 } hwOntMgVagTidPrefix OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..16)) MAX-ACCESS read-write STATUS current DESCRIPTION "The rtp tid prefix." ::= { hwOntMgVagEntry 23 } hwOntMgVagTidMode OBJECT-TYPE SYNTAX INTEGER { aligned(1), notAligned(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The rtp tid mode. Options: 1.aligned(1) -indicates the rtp tid mode is aligned 2.notAligned(2) -indicates the rtp tid mode is not-aligned " ::= { hwOntMgVagEntry 24 } hwOntMgVagTidDigitBegin OBJECT-TYPE SYNTAX Integer32 (0..99999999) MAX-ACCESS read-write STATUS current DESCRIPTION "The beginning number of the rtp tid digit." ::= { hwOntMgVagEntry 25 } hwOntMgVagTidDigitLength OBJECT-TYPE SYNTAX Integer32 (1..16) MAX-ACCESS read-write STATUS current DESCRIPTION "The length of the rtp tid digit." ::= { hwOntMgVagEntry 26 } hwOntMgVagRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Options: 1.active(1) -indicates active 2.notInService(2) -indicates not in service 3.notReady(3) -indicates not ready 4.createAndGo(4) -indicates create and go 5.createAndWait(5) -indicates create and wait 6.destroy(6) -indicates destroy Only 4 and 6 is support Now." ::= { hwOntMgVagEntry 27 } hwOntMgProtocolType OBJECT-TYPE SYNTAX INTEGER { h248(1), mgcp(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The mg protocol type. Options: 1.h248(1) -indicates the mg protocol is H248 2.mgcp(2) -indicates the mg protocol is MGCP Default: H248(1) " ::= { hwOntMgVagEntry 28 } hwOntMgAttrConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF HwOntMgAttrConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Ont MG public attribute table. The index of this table is hwOntMgAttrIfIndex,hwOntMgAttrOntIndex,hwOntMgAttrMgId" ::= { hwVoipOntObjects 16 } hwOntMgAttrConfigEntry OBJECT-TYPE SYNTAX HwOntMgAttrConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Ont MG public attribute table. The index of this entry is hwOntMgAttrIfIndex,hwOntMgAttrOntIndex,hwOntMgAttrMgId" INDEX { hwOntMgAttrIfIndex,hwOntMgAttrOntIndex,hwOntMgAttrMgId } ::= { hwOntMgAttrConfigTable 1 } HwOntMgAttrConfigEntry ::= SEQUENCE { hwOntMgAttrIfIndex Unsigned32, hwOntMgAttrOntIndex Integer32, hwOntMgAttrMgId Integer32, hwOntMgAttrFaxMode INTEGER, hwOntMgAttrNegoMode INTEGER, hwOntMgAttrOrder1stCodec Integer32, hwOntMgAttrOrder1stPacketPeriod INTEGER, hwOntMgAttrOrder1stSilenceFlag INTEGER, hwOntMgAttrOrder2stCodec Integer32, hwOntMgAttrOrder2stPacketPeriod INTEGER, hwOntMgAttrOrder2stSilenceFlag INTEGER, hwOntMgAttrOrder3stCodec Integer32, hwOntMgAttrOrder3stPacketPeriod INTEGER, hwOntMgAttrOrder3stSilenceFlag INTEGER, hwOntMgAttrOrder4stCodec Integer32, hwOntMgAttrOrder4stPacketPeriod INTEGER, hwOntMgAttrOrder4stSilenceFlag INTEGER, hwOntMgAttrOobDtmfFlag INTEGER, hwOntMgAttrAnnouncementType INTEGER, hwOntMgAttrJitterBuffTarget Integer32, hwOntMgAttrJitterBuffMax Integer32, hwOntMgAttrJitterBuffMin Integer32, hwOntMgAttrJitterBuffDynTarget Integer32, hwOntMgAttrEchoFlag INTEGER, hwOntMgAttrPstnProtocolVariant Integer32, hwOntMgAttrPiggybackEventFlag INTEGER, hwOntMgAttrToneEventFlag INTEGER, hwOntMgAttrDtmfEventFlag INTEGER, hwOntMgAttrCasEventFlag INTEGER, hwOntMgAttrFlashUpper Integer32, hwOntMgAttrFlashLower Integer32, hwOntMgAttrSilence INTEGER } hwOntMgAttrIfIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifindex of xPON port." ::= { hwOntMgAttrConfigEntry 1 } hwOntMgAttrOntIndex OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ONT index." ::= { hwOntMgAttrConfigEntry 2 } hwOntMgAttrMgId OBJECT-TYPE SYNTAX Integer32 (1..32) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MG ID." ::= { hwOntMgAttrConfigEntry 3 } hwOntMgAttrFaxMode OBJECT-TYPE SYNTAX INTEGER { passthru(1), t38(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The fax mode. Options: 1.passthru(1) -indicates the fax mode is passthru 2.t38(2) -indicates the fax mode is t38 " ::= { hwOntMgAttrConfigEntry 4 } hwOntMgAttrNegoMode OBJECT-TYPE SYNTAX INTEGER { negotiate(1), selfSwitch(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The negotiate mode. Options: 1.negotiate(1) -indicates the negotiate mode is negotiate 2.selfSwitch(2) -indicates the fax mode is self-switch " ::= { hwOntMgAttrConfigEntry 5 } hwOntMgAttrOrder1stCodec OBJECT-TYPE SYNTAX Integer32 (0..95|255) MAX-ACCESS read-write STATUS current DESCRIPTION "codec of order 1. It is valid for GPON ONT and invalid for EPON ONT." ::= { hwOntMgAttrConfigEntry 6 } hwOntMgAttrOrder1stPacketPeriod OBJECT-TYPE SYNTAX INTEGER { time10ms(1), time15ms(2), time20ms(3), time25ms(4), time30ms(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "packet period of order 1. It is valid for GPON ONT and invalid for EPON ONT. Options: 1.time10ms(1) -indicates the packet period is 10ms 2.time15ms(2) -indicates the packet period is 15ms 3.time20ms(3) -indicates the packet period is 20ms 4.time25ms(4) -indicates the packet period is 25ms 5.time30ms(5) -indicates the packet period is 30ms " ::= { hwOntMgAttrConfigEntry 7 } hwOntMgAttrOrder1stSilenceFlag OBJECT-TYPE SYNTAX INTEGER { off(1), on(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "silence suppression of order 1. It is valid for GPON ONT and invalid for EPON ONT. Options: 1.off(1) -indicates the silence suppression is off 2.on(2) -indicates the silence suppression is on " ::= { hwOntMgAttrConfigEntry 8 } hwOntMgAttrOrder2stCodec OBJECT-TYPE SYNTAX Integer32 (0..95|255) MAX-ACCESS read-write STATUS current DESCRIPTION "codec of order 2. It is valid for GPON ONT and invalid for EPON ONT." ::= { hwOntMgAttrConfigEntry 9 } hwOntMgAttrOrder2stPacketPeriod OBJECT-TYPE SYNTAX INTEGER { time10ms(1), time15ms(2), time20ms(3), time25ms(4), time30ms(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "packet period of order 2. It is valid for GPON ONT and invalid for EPON ONT. Options: 1.time10ms(1) -indicates the packet period is 10ms 2.time15ms(2) -indicates the packet period is 15ms 3.time20ms(3) -indicates the packet period is 20ms 4.time25ms(4) -indicates the packet period is 25ms 5.time30ms(5) -indicates the packet period is 30ms " ::= { hwOntMgAttrConfigEntry 10 } hwOntMgAttrOrder2stSilenceFlag OBJECT-TYPE SYNTAX INTEGER { off(1), on(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "silence suppression of order 2. It is valid for GPON ONT and invalid for EPON ONT. Options: 1.off(1) -indicates the silence suppression is off 2.on(2) -indicates the silence suppression is on " ::= { hwOntMgAttrConfigEntry 11 } hwOntMgAttrOrder3stCodec OBJECT-TYPE SYNTAX Integer32 (0..95|255) MAX-ACCESS read-write STATUS current DESCRIPTION "codec of order 3. It is valid for GPON ONT and invalid for EPON ONT." ::= { hwOntMgAttrConfigEntry 12 } hwOntMgAttrOrder3stPacketPeriod OBJECT-TYPE SYNTAX INTEGER { time10ms(1), time15ms(2), time20ms(3), time25ms(4), time30ms(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "packet period of order 3. It is valid for GPON ONT and invalid for EPON ONT. Options: 1.time10ms(1) -indicates the packet period is 10ms 2.time15ms(2) -indicates the packet period is 15ms 3.time20ms(3) -indicates the packet period is 20ms 4.time25ms(4) -indicates the packet period is 25ms 5.time30ms(5) -indicates the packet period is 30ms " ::= { hwOntMgAttrConfigEntry 13 } hwOntMgAttrOrder3stSilenceFlag OBJECT-TYPE SYNTAX INTEGER { off(1), on(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "silence suppression of order 3. It is valid for GPON ONT and invalid for EPON ONT. Options: 1.off(1) -indicates the silence suppression is off 2.on(2) -indicates the silence suppression is on " ::= { hwOntMgAttrConfigEntry 14 } hwOntMgAttrOrder4stCodec OBJECT-TYPE SYNTAX Integer32 (0..95|255) MAX-ACCESS read-write STATUS current DESCRIPTION "codec of order 4. It is valid for GPON ONT and invalid for EPON ONT." ::= { hwOntMgAttrConfigEntry 15 } hwOntMgAttrOrder4stPacketPeriod OBJECT-TYPE SYNTAX INTEGER { time10ms(1), time15ms(2), time20ms(3), time25ms(4), time30ms(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "packet period of order 3. It is valid for GPON ONT and invalid for EPON ONT. Options: 1.time10ms(1) -indicates the packet period is 10ms 2.time15ms(2) -indicates the packet period is 15ms 3.time20ms(3) -indicates the packet period is 20ms 4.time25ms(4) -indicates the packet period is 25ms 5.time30ms(5) -indicates the packet period is 30ms " ::= { hwOntMgAttrConfigEntry 16 } hwOntMgAttrOrder4stSilenceFlag OBJECT-TYPE SYNTAX INTEGER { off(1), on(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "silence suppression of order 4. It is valid for GPON ONT and invalid for EPON ONT. Options: 1.off(1) -indicates the silence suppression is off 2.on(2) -indicates the silence suppression is on " ::= { hwOntMgAttrConfigEntry 17 } hwOntMgAttrOobDtmfFlag OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Oob Dtmf Flag. It is valid for GPON ONT and invalid for EPON ONT. Options: 1.disable(1) -indicates the Oob DTMF is disable 2.enable(2) -indicates the Oob DTMF is enable " ::= { hwOntMgAttrConfigEntry 18 } hwOntMgAttrAnnouncementType OBJECT-TYPE SYNTAX INTEGER { silence(1), reordertone(2), fastbusy(3), voiceannouncement(4), none(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "Announcement after off hook time out. It is valid for GPON ONT and invalid for EPON ONT. Options: 1.silence(1) -indicates play the voice of silence after off hook time out 2.reordertone(2) -indicates play the voice of reorder tone after off hook time out 3.fastbusy(3) -indicates play the voice of fast busy after off hook time out 4.voiceannouncement(4) -indicates play the voice of voiceannouncement after off hook time out 5.none(5) -indicates play none after off hook time out " ::= { hwOntMgAttrConfigEntry 19 } hwOntMgAttrJitterBuffTarget OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The target value of fixed jitter buffer. It is valid for GPON ONT and invalid for EPON ONT." ::= { hwOntMgAttrConfigEntry 20 } hwOntMgAttrJitterBuffMax OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The max value of jitter buffer. It is valid for GPON ONT and invalid for EPON ONT." ::= { hwOntMgAttrConfigEntry 21 } hwOntMgAttrJitterBuffMin OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The min value of jitter buffer. It is valid for GPON ONT and invalid for EPON ONT." ::= { hwOntMgAttrConfigEntry 22 } hwOntMgAttrJitterBuffDynTarget OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The target value of dynamic jitter buffer. It is valid for GPON ONT and invalid for EPON ONT." ::= { hwOntMgAttrConfigEntry 23 } hwOntMgAttrEchoFlag OBJECT-TYPE SYNTAX INTEGER { off(1), on(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "echo flag. It is valid for GPON ONT and invalid for EPON ONT. Options: 1.off(1) -indicates the echo flag is off 2.on(2) -indicates the echo flag is on " ::= { hwOntMgAttrConfigEntry 24 } hwOntMgAttrPstnProtocolVariant OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "country code, means geography location. It is valid for GPON ONT and invalid for EPON ONT. Options: Indicate the E.164 country code " ::= { hwOntMgAttrConfigEntry 25 } hwOntMgAttrPiggybackEventFlag OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "whether process piggyback events or not. It is valid for GPON ONT and invalid for EPON ONT. Options: 1.disable(1) -indicates don't process piggyback events 2.enable(2) -indicates process piggyback events " ::= { hwOntMgAttrConfigEntry 26 } hwOntMgAttrToneEventFlag OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "whether process Tone events or not. It is valid for GPON ONT and invalid for EPON ONT. Options: 1.disable(1) -indicates don't process Tone events 2.enable(2) -indicates process Tone events " ::= { hwOntMgAttrConfigEntry 27 } hwOntMgAttrDtmfEventFlag OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "whether process Dtmf events or not. It is valid for GPON ONT and invalid for EPON ONT. Options: 1.disable(1) -indicates don't process Dtmf events 2.enable(2) -indicates process Dtmf events " ::= { hwOntMgAttrConfigEntry 28 } hwOntMgAttrCasEventFlag OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "whether process cas events or not. It is valid for GPON ONT and invalid for EPON ONT. Options: 1.disable(1) -indicates don't process cas events 2.enable(2) -indicates process cas events " ::= { hwOntMgAttrConfigEntry 29 } hwOntMgAttrFlashUpper OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The flash upper limit. It is valid for GPON ONT and invalid for EPON ONT. If the value is 0, it indicates ONT own default value. " ::= { hwOntMgAttrConfigEntry 30 } hwOntMgAttrFlashLower OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The flash lower limit. It is valid for GPON ONT and invalid for EPON ONT. If the value is 0, it indicates ONT own default value. " ::= { hwOntMgAttrConfigEntry 31 } hwOntMgAttrSilence OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2), baseOnCodec(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The silence switch. It is valid for GPON ONT and invalid for EPON ONT. Options: 1.disable(1) -indicates the silence switch is disable 2.enable(2) -indicates the silence switch is enable 3.baseOnCodec(3) -indicates the silence switch is base-on-codec " ::= { hwOntMgAttrConfigEntry 32 } hwOntSipVagTable OBJECT-TYPE SYNTAX SEQUENCE OF HwOntSipVagEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "SIP VAG Table. The indexes of this table are hwOntSipVagIfIndex, hwOntSipVagOntIndex, hwOntSipVagMgId." ::= { hwVoipOntObjects 17 } hwOntSipVagEntry OBJECT-TYPE SYNTAX HwOntSipVagEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "SIP VAG Table. The indexes of this entry are hwOntSipVagIfIndex, hwOntSipVagOntIndex, hwOntSipVagMgId." INDEX { hwOntSipVagIfIndex, hwOntSipVagOntIndex, hwOntSipVagMgId } ::= { hwOntSipVagTable 1 } HwOntSipVagEntry ::= SEQUENCE { hwOntSipVagIfIndex Unsigned32, hwOntSipVagOntIndex Integer32, hwOntSipVagMgId Integer32, hwOntSipVagIpIndex Integer32, hwOntSipVagProxyPort Integer32, hwOntSipVagSecondaryProxyUri OCTET STRING, hwOntSipVagSecondaryProxyPort Integer32, hwOntSipVagRegisterPort Integer32, hwOntSipVagSecondaryRegisterUri OCTET STRING, hwOntSipVagSecondaryRegisterPort Integer32, hwOntSipVagOutboundUri OCTET STRING, hwOntSipVagOutboundPort Integer32, hwOntSipVagHeartbeatMode INTEGER, hwOntSipVagHeartbeatCycle Integer32, hwOntSipVagHeartbeatCount Integer32, hwOntSipVagProxyUri OCTET STRING, hwOntSipVagRtpPortMin Integer32, hwOntSipVagRtpPortMax Integer32, hwOntSipVagRtpDscp Integer32, hwOntSipVagSignalTransMode INTEGER, hwOntSipVagSignalPortId Integer32, hwOntSipVagSignalDscp Integer32, hwOntSipVagRegisterUri OCTET STRING, hwOntSipVagRegExpiration Integer32, hwOntSipVagReRegStartTime Integer32, hwOntSipVagVoicemailUri OCTET STRING, hwOntSipVagVoicemailSubExpir Unsigned32, hwOntSipVagConfFactoryUri OCTET STRING, hwOntSipVagBridgedLineAgentUri OCTET STRING, hwOntSipVagUserAuthRealm OCTET STRING, hwOntSipVagHomeDomain OCTET STRING, hwOntSipVagRowStatus RowStatus, hwOntSipVagServerType INTEGER } hwOntSipVagIfIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifindex." ::= { hwOntSipVagEntry 1 } hwOntSipVagOntIndex OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ONT ID." ::= { hwOntSipVagEntry 2 } hwOntSipVagMgId OBJECT-TYPE SYNTAX Integer32 (1..32) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MG ID." ::= { hwOntSipVagEntry 3 } hwOntSipVagIpIndex OBJECT-TYPE SYNTAX Integer32 (0..3) MAX-ACCESS read-write STATUS current DESCRIPTION "The index of IP interface. " ::= { hwOntSipVagEntry 4 } hwOntSipVagProxyPort OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The port of proxy server." ::= { hwOntSipVagEntry 5 } hwOntSipVagSecondaryProxyUri OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "The URI of secondary proxy server." ::= { hwOntSipVagEntry 6 } hwOntSipVagSecondaryProxyPort OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The port of secondary proxy server. " ::= { hwOntSipVagEntry 7 } hwOntSipVagRegisterPort OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The port of register server. It is invalid For EPON ONT when server type is IMS." ::= { hwOntSipVagEntry 8 } hwOntSipVagSecondaryRegisterUri OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "The URI of secondary register server. It is invalid For EPON ONT when server type is IMS." ::= { hwOntSipVagEntry 9 } hwOntSipVagSecondaryRegisterPort OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The port of secondary register server. It is invalid For EPON ONT when server type is IMS. " ::= { hwOntSipVagEntry 10 } hwOntSipVagOutboundUri OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "The URI of outbound server. It is invalid For EPON ONT when server type is IMS." ::= { hwOntSipVagEntry 11 } hwOntSipVagOutboundPort OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The port of outbound server. It is invalid For EPON ONT when server type is IMS." ::= { hwOntSipVagEntry 12 } hwOntSipVagHeartbeatMode OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The heartbeat mode of ONT SIP agent. Options: 1.disable(1) -indicates disable heartbeat 2.enable(2) -indicates enable heartbeat " ::= { hwOntSipVagEntry 13 } hwOntSipVagHeartbeatCycle OBJECT-TYPE SYNTAX Integer32 (1..1000) MAX-ACCESS read-write STATUS current DESCRIPTION "The heartbeat cycle of ONT SIP agent." ::= { hwOntSipVagEntry 14 } hwOntSipVagHeartbeatCount OBJECT-TYPE SYNTAX Integer32 (1..30) MAX-ACCESS read-write STATUS current DESCRIPTION "The heartbeat count of ONT SIP agent." ::= { hwOntSipVagEntry 15 } hwOntSipVagProxyUri OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "The URI of proxy server." ::= { hwOntSipVagEntry 16 } hwOntSipVagRtpPortMin OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The minimal port of media. It is valid for GPON ONT and invalid for EPON ONT." ::= { hwOntSipVagEntry 17 } hwOntSipVagRtpPortMax OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The maximal port of media. It is valid for GPON ONT and invalid for EPON ONT." ::= { hwOntSipVagEntry 18 } hwOntSipVagRtpDscp OBJECT-TYPE SYNTAX Integer32 (0..63) MAX-ACCESS read-write STATUS current DESCRIPTION "The DSCP of media. It is valid for GPON ONT and invalid for EPON ONT." ::= { hwOntSipVagEntry 19 } hwOntSipVagSignalTransMode OBJECT-TYPE SYNTAX INTEGER { tcp(1), udp(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The transfer mode of signal. It is valid for GPON ONT and invalid for EPON ONT. Options: 1.tcp(1) -indicates tcp 2.udp(2) -indicates udp " ::= { hwOntSipVagEntry 20 } hwOntSipVagSignalPortId OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The port ID of signal." ::= { hwOntSipVagEntry 21 } hwOntSipVagSignalDscp OBJECT-TYPE SYNTAX Integer32 (0..63) MAX-ACCESS read-write STATUS current DESCRIPTION "The DSCP of signal. It is valid for GPON ONT and invalid for EPON ONT." ::= { hwOntSipVagEntry 22 } hwOntSipVagRegisterUri OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "The URI of register server. It is invalid for EPON ONT when server type is IMS." ::= { hwOntSipVagEntry 23 } hwOntSipVagRegExpiration OBJECT-TYPE SYNTAX Integer32 (1..65534) MAX-ACCESS read-write STATUS current DESCRIPTION "The expiration of registration." ::= { hwOntSipVagEntry 24 } hwOntSipVagReRegStartTime OBJECT-TYPE SYNTAX Integer32 (1..65534) MAX-ACCESS read-write STATUS current DESCRIPTION "Registration rereg head start time. It is valid for GPON ONT and invalid for EPON ONT." ::= { hwOntSipVagEntry 25 } hwOntSipVagVoicemailUri OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "The URI of voicemail. It is valid for GPON ONT and invalid for EPON ONT." ::= { hwOntSipVagEntry 26 } hwOntSipVagVoicemailSubExpir OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION "The subscrition expiration of voicemail. It is valid for GPON ONT and invalid for EPON ONT." ::= { hwOntSipVagEntry 27 } hwOntSipVagConfFactoryUri OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "The URI of conference factory. It is valid for GPON ONT and invalid for EPON ONT." ::= { hwOntSipVagEntry 28 } hwOntSipVagBridgedLineAgentUri OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "The URI of bridged line agent. It is valid for GPON ONT and invalid for EPON ONT." ::= { hwOntSipVagEntry 29 } hwOntSipVagUserAuthRealm OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..24)) MAX-ACCESS read-write STATUS current DESCRIPTION "The auth realm. It is valid for GPON ONT and invalid for EPON ONT." ::= { hwOntSipVagEntry 30 } hwOntSipVagHomeDomain OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "The home domain. It is invalid for EPON ONT when server type is not IMS." ::= { hwOntSipVagEntry 31 } hwOntSipVagRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Options: 1.active(1) -indicates active 2.notInService(2) -indicates not in service 3.notReady(3) -indicates not ready 4.createAndGo(4) -indicates create and go 5.createAndWait(5) -indicates create and wait 6.destroy(6) -indicates destroy Only createAndGo(4) and destroy(6) is support Now." ::= { hwOntSipVagEntry 32 } hwOntSipVagServerType OBJECT-TYPE SYNTAX INTEGER { general(1), ims(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The server type. It is valid for EPON ONT and invalid for GPON ONT. Options: 1.general(1) -indicates general SIP server 2.ims(2) -indicates IMS Default:general(1) " ::= { hwOntSipVagEntry 33 } hwOntPotsPTPConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF HwOntPotsPTPConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "POTS PTP Electrical Attribute Table. The indexes of this table are hwVoiceIfIndex, hwVoiceOntIndex, hwVoiceOntPortIndex." ::= { hwVoipOntObjects 18 } hwOntPotsPTPConfigEntry OBJECT-TYPE SYNTAX HwOntPotsPTPConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "POTS PTP Electrical Attribute Table. The indexes of this entry are hwVoiceIfIndex, hwVoiceOntIndex, hwVoiceOntPortIndex." INDEX { hwVoiceIfIndex, hwVoiceOntIndex, hwVoiceOntPortIndex } ::= { hwOntPotsPTPConfigTable 1 } HwOntPotsPTPConfigEntry ::= SEQUENCE { hwOntPotsPTPSendGain Integer32, hwOntPotsPTPRecvGain Integer32, hwOntPotsPTPImpedance Integer32, hwOntPotsPTPSignaling Integer32 } hwOntPotsPTPSendGain OBJECT-TYPE SYNTAX Integer32 (1..37) MAX-ACCESS read-write STATUS current DESCRIPTION "Send Gain. 1 : -12.0db 2 : -11.5db 3 : -11.0db 4 : -10.5db 5 : -10.0db 6 : -9.5db 7 : -9.0db 8 : -8.5db 9 : -8.0db 10 : -7.5db 11 : -7.0db 12 : -6.5db 13 : -6.0db 14 : -5.5db 15 : -5.0db 16 : -4.5db 17 : -4.0db 18 : -3.5db 19 : -3.0db 20 : -2.5db 21 : -2.0db 22 : -1.5db 23 : -1.0db 24 : -0.5db 25 : 0db 26 : +0.5db 27 : +1.0db 28 : +1.5db 29 : +2.0db 30 : +2.5db 31 : +3.0db 32 : +3.5db 33 : +4.0db 34 : +4.5db 35 : +5.0db 36 : +5.5db 37 : +6.0db" DEFVAL { 25 } ::= { hwOntPotsPTPConfigEntry 1 } hwOntPotsPTPRecvGain OBJECT-TYPE SYNTAX Integer32 (1..37) MAX-ACCESS read-write STATUS current DESCRIPTION "Recv Gain. 1 : -12.0db 2 : -11.5db 3 : -11.0db 4 : -10.5db 5 : -10.0db 6 : -9.5db 7 : -9.0db 8 : -8.5db 9 : -8.0db 10 : -7.5db 11 : -7.0db 12 : -6.5db 13 : -6.0db 14 : -5.5db 15 : -5.0db 16 : -4.5db 17 : -4.0db 18 : -3.5db 19 : -3.0db 20 : -2.5db 21 : -2.0db 22 : -1.5db 23 : -1.0db 24 : -0.5db 25 : 0db 26 : +0.5db 27 : +1.0db 28 : +1.5db 29 : +2.0db 30 : +2.5db 31 : +3.0db 32 : +3.5db 33 : +4.0db 34 : +4.5db 35 : +5.0db 36 : +5.5db 37 : +6.0db" DEFVAL { 25 } ::= { hwOntPotsPTPConfigEntry 2 } hwOntPotsPTPImpedance OBJECT-TYPE SYNTAX Integer32 (1..76) MAX-ACCESS read-write STATUS current DESCRIPTION "Impedance. 1: r-600 Ohms(1) 2: r-900 Ohms(2) 3: c1:150 nF-R1:750 Ohm-R2:270 Ohm(3) 4: c1:115 nF-R1:820 Ohm-R2:220 Ohm(4) 5: c1:230 nF-R1:1500 Ohm-R2:320 Ohm(5) 65: Bureau machine in China(200+680|| 100nf) 66: User Machine in China(200+560|| 100nf) 67: Interface of Russian(150+510|| 47nf) 68: (220+820|| 120nf ) 69: Interface of Brazil(800|| 50nf) 70: Abandoned 71: HK_BT3(Zin=370+620|| 310nf,Zload=600) 72: HK_BT5(Zin=270+264|| 357nf+1434|| 265nf,Zload=600) 73: BT1(Zin=87+1052||228nF+229||28.4nF, Zload=93+615||471nF+179||495nF+244||32nF) 74: BT2(Zin=87+1052||228nF+229||28.4nF, Zload=270+264||357nF+1434||265nF) 75: BT3(Zin=87+1052||228nF+229||28.4nF, Zload=164+162||363nF+1227||350nF) 76: New Zealand(Zin=370+620|| 310nf)" DEFVAL { 3 } ::= { hwOntPotsPTPConfigEntry 3 } hwOntPotsPTPSignaling OBJECT-TYPE SYNTAX Integer32 (1..6) MAX-ACCESS read-write STATUS current DESCRIPTION "Pots side signaling. 1: loopStart(1) 2: groundStart(2) 3: loopReverseBattery(3) 4: coinFirst(4) 5: dialToneFirst(5) 6: multiParty(6) " DEFVAL { 1 } ::= { hwOntPotsPTPConfigEntry 4 } hwOntMgCTPConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF HwOntMgCTPConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Ont H248 and MGCP PSTN CTP table. The indexes of this table are hwVoiceIfIndex,hwVoiceOntIndex,hwVoiceOntPortIndex" ::= { hwVoipOntObjects 19 } hwOntMgCTPConfigEntry OBJECT-TYPE SYNTAX HwOntMgCTPConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Ont H248 and MGCP PSTN CTP table. The indexes of this entry are hwVoiceIfIndex,hwVoiceOntIndex,hwVoiceOntPortIndex" INDEX { hwVoiceIfIndex,hwVoiceOntIndex,hwVoiceOntPortIndex } ::= { hwOntMgCTPConfigTable 1 } HwOntMgCTPConfigEntry ::= SEQUENCE { hwOntMgPstnCTPMgId Integer32, hwOntMgPstnCTPTerminalId OCTET STRING, hwOntMgPstnCTPCodecSelect INTEGER, hwOntMgPstnCTPOrder1stCodec Integer32, hwOntMgPstnCTPOrder1stPacketPeriod INTEGER, hwOntMgPstnCTPOrder1stSilenceFlag INTEGER, hwOntMgPstnCTPOrder2stCodec Integer32, hwOntMgPstnCTPOrder2stPacketPeriod INTEGER, hwOntMgPstnCTPOrder2stSilenceFlag INTEGER, hwOntMgPstnCTPOrder3stCodec Integer32, hwOntMgPstnCTPOrder3stPacketPeriod INTEGER, hwOntMgPstnCTPOrder3stSilenceFlag INTEGER, hwOntMgPstnCTPOrder4stCodec Integer32, hwOntMgPstnCTPOrder4stPacketPeriod INTEGER, hwOntMgPstnCTPOrder4stSilenceFlag INTEGER, hwOntMgPstnCTPRowStatus RowStatus } hwOntMgPstnCTPMgId OBJECT-TYPE SYNTAX Integer32 (1..32) MAX-ACCESS read-write STATUS current DESCRIPTION "The H.248 MG ID." ::= { hwOntMgCTPConfigEntry 1 } hwOntMgPstnCTPTerminalId OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "The terminal ID." ::= { hwOntMgCTPConfigEntry 2 } hwOntMgPstnCTPCodecSelect OBJECT-TYPE SYNTAX INTEGER { baseOnUser(1), baseOnMg(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Selecting codec configuration from MG or user. It is valid for GPON ONT and invalid for EPON ONT. Options: 1.baseOnUser(1) -indicates the codec is base-on-user 2.baseOnMg(2) -indicates the codec is base-on-mg Defalut: baseOnMg(2) " DEFVAL { baseOnMg } ::= { hwOntMgCTPConfigEntry 3 } hwOntMgPstnCTPOrder1stCodec OBJECT-TYPE SYNTAX Integer32 (0..95|255) MAX-ACCESS read-write STATUS current DESCRIPTION "codec of order 1. It is valid for GPON ONT and invalid for EPON ONT. defalut: 8 " DEFVAL { 8 } ::= { hwOntMgCTPConfigEntry 4 } hwOntMgPstnCTPOrder1stPacketPeriod OBJECT-TYPE SYNTAX INTEGER { time10ms(1), time15ms(2), time20ms(3), time25ms(4), time30ms(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "packet period of order 1. It is valid for GPON ONT and invalid for EPON ONT. Options: 1.time10ms(1) -indicates the packet period is 10ms 2.time15ms(2) -indicates the packet period is 15ms 3.time20ms(3) -indicates the packet period is 20ms 4.time25ms(4) -indicates the packet period is 25ms 5.time30ms(5) -indicates the packet period is 30ms Defalut: time20ms(3) " DEFVAL { time20ms } ::= { hwOntMgCTPConfigEntry 5 } hwOntMgPstnCTPOrder1stSilenceFlag OBJECT-TYPE SYNTAX INTEGER { off(1), on(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "silence suppression of order 1. It is valid for GPON ONT and invalid for EPON ONT. Options: 1.off(1) -indicates the silence suppression is off 2.on(2) -indicates the silence suppression is on Defalut: off(1) " DEFVAL { off } ::= { hwOntMgCTPConfigEntry 6 } hwOntMgPstnCTPOrder2stCodec OBJECT-TYPE SYNTAX Integer32 (0..95|255) MAX-ACCESS read-write STATUS current DESCRIPTION "codec of order 2. It is valid for GPON ONT and invalid for EPON ONT. defalut: 0 " DEFVAL { 0 } ::= { hwOntMgCTPConfigEntry 7 } hwOntMgPstnCTPOrder2stPacketPeriod OBJECT-TYPE SYNTAX INTEGER { time10ms(1), time15ms(2), time20ms(3), time25ms(4), time30ms(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "packet period of order 2. It is valid for GPON ONT and invalid for EPON ONT. Options: 1.time10ms(1) -indicates the packet period is 10ms 2.time15ms(2) -indicates the packet period is 15ms 3.time20ms(3) -indicates the packet period is 20ms 4.time25ms(4) -indicates the packet period is 25ms 5.time30ms(5) -indicates the packet period is 30ms Defalut: time20ms(3) " DEFVAL { time20ms } ::= { hwOntMgCTPConfigEntry 8 } hwOntMgPstnCTPOrder2stSilenceFlag OBJECT-TYPE SYNTAX INTEGER { off(1), on(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "silence suppression of order 2. It is valid for GPON ONT and invalid for EPON ONT. Options: 1.off(1) -indicates the silence suppression is off 2.on(2) -indicates the silence suppression is on Defalut: off(1) " DEFVAL { off } ::= { hwOntMgCTPConfigEntry 9 } hwOntMgPstnCTPOrder3stCodec OBJECT-TYPE SYNTAX Integer32 (0..95|255) MAX-ACCESS read-write STATUS current DESCRIPTION "codec of order 3. It is valid for GPON ONT and invalid for EPON ONT. defalut: 18 " DEFVAL { 18 } ::= { hwOntMgCTPConfigEntry 10 } hwOntMgPstnCTPOrder3stPacketPeriod OBJECT-TYPE SYNTAX INTEGER { time10ms(1), time15ms(2), time20ms(3), time25ms(4), time30ms(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "packet period of order 3. It is valid for GPON ONT and invalid for EPON ONT. Options: 1.time10ms(1) -indicates the packet period is 10ms 2.time15ms(2) -indicates the packet period is 15ms 3.time20ms(3) -indicates the packet period is 20ms 4.time25ms(4) -indicates the packet period is 25ms 5.time30ms(5) -indicates the packet period is 30ms Defalut: time20ms(3) " DEFVAL { time20ms } ::= { hwOntMgCTPConfigEntry 11 } hwOntMgPstnCTPOrder3stSilenceFlag OBJECT-TYPE SYNTAX INTEGER { off(1), on(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "silence suppression of order 3. It is valid for GPON ONT and invalid for EPON ONT. Options: 1.off(1) -indicates the silence suppression is off 2.on(2) -indicates the silence suppression is on Defalut: off(1) " DEFVAL { off } ::= { hwOntMgCTPConfigEntry 12 } hwOntMgPstnCTPOrder4stCodec OBJECT-TYPE SYNTAX Integer32 (0..95|255) MAX-ACCESS read-write STATUS current DESCRIPTION "codec of order 4. It is valid for GPON ONT and invalid for EPON ONT. defalut: 9 " DEFVAL { 9 } ::= { hwOntMgCTPConfigEntry 13 } hwOntMgPstnCTPOrder4stPacketPeriod OBJECT-TYPE SYNTAX INTEGER { time10ms(1), time15ms(2), time20ms(3), time25ms(4), time30ms(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "packet period of order 4. It is valid for GPON ONT and invalid for EPON ONT. Options: 1.time10ms(1) -indicates the packet period is 10ms 2.time15ms(2) -indicates the packet period is 15ms 3.time20ms(3) -indicates the packet period is 20ms 4.time25ms(4) -indicates the packet period is 25ms 5.time30ms(5) -indicates the packet period is 30ms Defalut: time20ms(3) " DEFVAL { time20ms } ::= { hwOntMgCTPConfigEntry 14 } hwOntMgPstnCTPOrder4stSilenceFlag OBJECT-TYPE SYNTAX INTEGER { off(1), on(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "silence suppression of order 4. It is valid for GPON ONT and invalid for EPON ONT. Options: 1.off(1) -indicates the silence suppression is off 2.on(2) -indicates the silence suppression is on Defalut: off(1) " DEFVAL { off } ::= { hwOntMgCTPConfigEntry 15 } hwOntMgPstnCTPRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Options: 1.active(1) -indicates active 2.notInService(2) -indicates not in service 3.notReady(3) -indicates not ready 4.createAndGo(4) -indicates create and go 5.createAndWait(5) -indicates create and wait 6.destroy(6) -indicates destroy Only 4 and 6 is support Now." ::= { hwOntMgCTPConfigEntry 16 } -- 1.3.6.1.4.1.2011.6.36.11.20 -- 1.3.6.1.4.1.2011.6.36.11.20 hwOntSIPCTPConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF HwOntSIPCTPConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "SIP PSTN CTP Config Table. The indexes of this table are hwVoiceIfIndex, hwVoiceOntIndex, hwVoiceOntPortIndex." ::= { hwVoipOntObjects 20 } -- 1.3.6.1.4.1.2011.6.36.11.20.1 -- 1.3.6.1.4.1.2011.6.36.11.20.1 hwOntSIPCTPConfigEntry OBJECT-TYPE SYNTAX HwOntSIPCTPConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "SIP PSTN CTP Config Table. The indexes of this entry are hwVoiceIfIndex, hwVoiceOntIndex, hwVoiceOntPortIndex." INDEX { hwVoiceIfIndex, hwVoiceOntIndex, hwVoiceOntPortIndex } ::= { hwOntSIPCTPConfigTable 1 } HwOntSIPCTPConfigEntry ::= SEQUENCE { hwOntSIPCTPDigitmapTemplateIndex Integer32, hwOntSIPCTPDigitmapTemplateName OCTET STRING, hwOntSIPCTPMgID Integer32, hwOntSIPCTPTelno OCTET STRING, hwOntSIPCTPUsername OCTET STRING, hwOntSIPCTPPassword OCTET STRING, hwOntSIPCTPNewServiceRight BITS, hwOntSIPCTPHotlineUri OCTET STRING, hwOntSIPPstnCTPCodecSelect INTEGER, hwOntSIPPstnCTPOrder1stCodec Integer32, hwOntSIPPstnCTPOrder1stPacketPeriod INTEGER, hwOntSIPPstnCTPOrder1stSilenceFlag INTEGER, hwOntSIPPstnCTPOrder2stCodec Integer32, hwOntSIPPstnCTPOrder2stPacketPeriod INTEGER, hwOntSIPPstnCTPOrder2stSilenceFlag INTEGER, hwOntSIPPstnCTPOrder3stCodec Integer32, hwOntSIPPstnCTPOrder3stPacketPeriod INTEGER, hwOntSIPPstnCTPOrder3stSilenceFlag INTEGER, hwOntSIPPstnCTPOrder4stCodec Integer32, hwOntSIPPstnCTPOrder4stPacketPeriod INTEGER, hwOntSIPPstnCTPOrder4stSilenceFlag INTEGER, hwOntSIPCTPRowStatus RowStatus } -- 1.3.6.1.4.1.2011.6.36.11.20.1.1 -- 1.3.6.1.4.1.2011.6.36.11.20.1.1 hwOntSIPCTPDigitmapTemplateIndex OBJECT-TYPE SYNTAX Integer32 (1..64) MAX-ACCESS read-write STATUS current DESCRIPTION "DigitalMap profile index which is bound to POTS user. If only set digitmap profile(including hwOntSIPCTPDigitmapTemplateIndex and hwOntSIPCTPDigitmapTemplateName) for EPON ONT, hwVoiceOntPortIndex is invalid(means that all users of the EPON ONT will be bind to the specify digitmap profile)." DEFVAL { 1 } ::= { hwOntSIPCTPConfigEntry 1 } -- 1.3.6.1.4.1.2011.6.36.11.20.1.2 -- 1.3.6.1.4.1.2011.6.36.11.20.1.2 hwOntSIPCTPDigitmapTemplateName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "DigitalMap profile name which is bound to POTS user. If only set digitmap profile(including hwOntSIPCTPDigitmapTemplateIndex and hwOntSIPCTPDigitmapTemplateName) for EPON ONT, hwVoiceOntPortIndex is invalid(means that all users of the EPON ONT will be bind to the specify digitmap profile)." ::= { hwOntSIPCTPConfigEntry 2 } hwOntSIPCTPMgID OBJECT-TYPE SYNTAX Integer32 (1..32) MAX-ACCESS read-write STATUS current DESCRIPTION "The SIP MG ID." ::= { hwOntSIPCTPConfigEntry 3 } hwOntSIPCTPTelno OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "SIP user's telephone number of ONT." ::= { hwOntSIPCTPConfigEntry 4 } -- 1.3.6.1.4.1.2011.6.36.11.20.1.5 -- 1.3.6.1.4.1.2011.6.36.11.20.1.5 hwOntSIPCTPUsername OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..50)) MAX-ACCESS read-write STATUS current DESCRIPTION "SIP user's name." ::= { hwOntSIPCTPConfigEntry 5 } -- 1.3.6.1.4.1.2011.6.36.11.20.1.6 -- 1.3.6.1.4.1.2011.6.36.11.20.1.6 hwOntSIPCTPPassword OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..24)) MAX-ACCESS read-write STATUS current DESCRIPTION "SIP user's password." ::= { hwOntSIPCTPConfigEntry 6 } -- 1.3.6.1.4.1.2011.6.36.11.20.1.7 -- 1.3.6.1.4.1.2011.6.36.11.20.1.7 hwOntSIPCTPNewServiceRight OBJECT-TYPE SYNTAX BITS { callWaiting(0), threeParty(1), callTransfer(2), callHold(3), callPark(4), doNotDisturb(5), conference(6), messageWaitingIndication(7), hotline(8), hotdelay(9) } MAX-ACCESS read-write STATUS current DESCRIPTION "SIP user's service right of ONT. It is valid for GPON ONT and invalid for EPON ONT. Options: 0.callWaiting(0), 1.threeParty(1), 2.callTransfer(2), 3.callHold(3), 4.callPark(4), 5.doNotDisturb(5), 6.conference(6), 7.messageWaitingIndication(7), 8.hotline(8), 9.hotdelay(9) " ::= { hwOntSIPCTPConfigEntry 7 } -- 1.3.6.1.4.1.2011.6.36.11.20.1.8 -- 1.3.6.1.4.1.2011.6.36.11.20.1.8 hwOntSIPCTPHotlineUri OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "SIP user's hot line number(URI). It is valid for GPON ONT and invalid for EPON ONT." ::= { hwOntSIPCTPConfigEntry 8 } hwOntSIPPstnCTPCodecSelect OBJECT-TYPE SYNTAX INTEGER { baseOnUser(1), baseOnMg(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Ont SIP Pstn user's selected codec. It is valid for GPON ONT and invalid for EPON ONT. Options: 1.baseOnUser(1) -indicates the codec is base-on-user 2.baseOnMg(2) -indicates the codec is base-on-mg Defalut: baseOnMg(2) " DEFVAL { baseOnMg } ::= { hwOntSIPCTPConfigEntry 9 } hwOntSIPPstnCTPOrder1stCodec OBJECT-TYPE SYNTAX Integer32 (0..95|255) MAX-ACCESS read-write STATUS current DESCRIPTION "codec of order 1. It is valid for GPON ONT and invalid for EPON ONT. defalut: 8 " DEFVAL { 8 } ::= { hwOntSIPCTPConfigEntry 10 } hwOntSIPPstnCTPOrder1stPacketPeriod OBJECT-TYPE SYNTAX INTEGER { time10ms(1), time15ms(2), time20ms(3), time25ms(4), time30ms(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "packet period of order 1. It is valid for GPON ONT and invalid for EPON ONT. Options: 1.time10ms(1) -indicates the packet period is 10ms 2.time15ms(2) -indicates the packet period is 15ms 3.time20ms(3) -indicates the packet period is 20ms 4.time25ms(4) -indicates the packet period is 25ms 5.time30ms(5) -indicates the packet period is 30ms Defalut: time20ms(3) " DEFVAL { time20ms } ::= { hwOntSIPCTPConfigEntry 11 } hwOntSIPPstnCTPOrder1stSilenceFlag OBJECT-TYPE SYNTAX INTEGER { off(1), on(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "silence suppression of order 1. It is valid for GPON ONT and invalid for EPON ONT. Options: 1.off(1) -indicates the silence suppression is off 2.on(2) -indicates the silence suppression is on Defalut: off(1) " DEFVAL { off } ::= { hwOntSIPCTPConfigEntry 12 } hwOntSIPPstnCTPOrder2stCodec OBJECT-TYPE SYNTAX Integer32 (0..95|255) MAX-ACCESS read-write STATUS current DESCRIPTION "codec of order 2. It is valid for GPON ONT and invalid for EPON ONT. defalut: 0 " DEFVAL { 0 } ::= { hwOntSIPCTPConfigEntry 13 } hwOntSIPPstnCTPOrder2stPacketPeriod OBJECT-TYPE SYNTAX INTEGER { time10ms(1), time15ms(2), time20ms(3), time25ms(4), time30ms(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "packet period of order 2. It is valid for GPON ONT and invalid for EPON ONT. Options: 1.time10ms(1) -indicates the packet period is 10ms 2.time15ms(2) -indicates the packet period is 15ms 3.time20ms(3) -indicates the packet period is 20ms 4.time25ms(4) -indicates the packet period is 25ms 5.time30ms(5) -indicates the packet period is 30ms Defalut: time20ms(3) " DEFVAL { time20ms } ::= { hwOntSIPCTPConfigEntry 14 } hwOntSIPPstnCTPOrder2stSilenceFlag OBJECT-TYPE SYNTAX INTEGER { off(1), on(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "silence suppression of order 2. It is valid for GPON ONT and invalid for EPON ONT. Options: 1.off(1) -indicates the silence suppression is off 2.on(2) -indicates the silence suppression is on Defalut: off(1) " DEFVAL { off } ::= { hwOntSIPCTPConfigEntry 15 } hwOntSIPPstnCTPOrder3stCodec OBJECT-TYPE SYNTAX Integer32 (0..95|255) MAX-ACCESS read-write STATUS current DESCRIPTION "codec of order 3. It is valid for GPON ONT and invalid for EPON ONT. defalut: 18 " DEFVAL { 18 } ::= { hwOntSIPCTPConfigEntry 16 } hwOntSIPPstnCTPOrder3stPacketPeriod OBJECT-TYPE SYNTAX INTEGER { time10ms(1), time15ms(2), time20ms(3), time25ms(4), time30ms(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "packet period of order 3. It is valid for GPON ONT and invalid for EPON ONT. Options: 1.time10ms(1) -indicates the packet period is 10ms 2.time15ms(2) -indicates the packet period is 15ms 3.time20ms(3) -indicates the packet period is 20ms 4.time25ms(4) -indicates the packet period is 25ms 5.time30ms(5) -indicates the packet period is 30ms Defalut: time20ms(3) " DEFVAL { time20ms } ::= { hwOntSIPCTPConfigEntry 17 } hwOntSIPPstnCTPOrder3stSilenceFlag OBJECT-TYPE SYNTAX INTEGER { off(1), on(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "silence suppression of order 3. It is valid for GPON ONT and invalid for EPON ONT. Options: 1.off(1) -indicates the silence suppression is off 2.on(2) -indicates the silence suppression is on Defalut: off(1) " DEFVAL { off } ::= { hwOntSIPCTPConfigEntry 18 } hwOntSIPPstnCTPOrder4stCodec OBJECT-TYPE SYNTAX Integer32 (0..95|255) MAX-ACCESS read-write STATUS current DESCRIPTION "codec of order 4. It is valid for GPON ONT and invalid for EPON ONT. defalut: 9 " DEFVAL { 9 } ::= { hwOntSIPCTPConfigEntry 19 } hwOntSIPPstnCTPOrder4stPacketPeriod OBJECT-TYPE SYNTAX INTEGER { time10ms(1), time15ms(2), time20ms(3), time25ms(4), time30ms(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "packet period of order 4. It is valid for GPON ONT and invalid for EPON ONT. Options: 1.time10ms(1) -indicates the packet period is 10ms 2.time15ms(2) -indicates the packet period is 15ms 3.time20ms(3) -indicates the packet period is 20ms 4.time25ms(4) -indicates the packet period is 25ms 5.time30ms(5) -indicates the packet period is 30ms Defalut: time20ms(3) " DEFVAL { time20ms } ::= { hwOntSIPCTPConfigEntry 20 } hwOntSIPPstnCTPOrder4stSilenceFlag OBJECT-TYPE SYNTAX INTEGER { off(1), on(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "silence suppression of order 4. It is valid for GPON ONT and invalid for EPON ONT. Options: 1.off(1) -indicates the silence suppression is off 2.on(2) -indicates the silence suppression is on Defalut: off(1) " DEFVAL { off } ::= { hwOntSIPCTPConfigEntry 21 } hwOntSIPCTPRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Options: 1.active(1) -indicates active 2.notInService(2) -indicates not in service 3.notReady(3) -indicates not ready 4.createAndGo(4) -indicates create and go 5.createAndWait(5) -indicates create and wait 6.destroy(6) -indicates destroy Only 4 and 6 is support Now." ::= { hwOntSIPCTPConfigEntry 22 } hwOntDigitMapBodyTable OBJECT-TYPE SYNTAX SEQUENCE OF HwOntDigitMapBodyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The digitmap body table. The indexes of this table are hwOntDigitMapTemplateIndex" ::= { hwVoipOntObjects 21 } hwOntDigitMapBodyEntry OBJECT-TYPE SYNTAX HwOntDigitMapBodyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The digitmap body table. The indexes of this entry are hwOntDigitMapTemplateIndex" INDEX { hwOntDigitMapTemplateIndex } ::= { hwOntDigitMapBodyTable 1 } HwOntDigitMapBodyEntry ::= SEQUENCE { hwOntDigitMapBodyLength Integer32, hwOntDigitMapBodySliceNo Integer32, hwOntDigitMapBodyString OCTET STRING } hwOntDigitMapBodyLength OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The digitmap body length." ::= { hwOntDigitMapBodyEntry 1 } hwOntDigitMapBodySliceNo OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The digitmap body slice. The high 8bits indicates total slice number. The low 8bits indicates current slice serial number(begin with 0)." ::= { hwOntDigitMapBodyEntry 2 } hwOntDigitMapBodyString OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..8191)) MAX-ACCESS read-write STATUS current DESCRIPTION "The digitmap body string." ::= { hwOntDigitMapBodyEntry 3 } hwOntRecentCallRecordsTable OBJECT-TYPE SYNTAX SEQUENCE OF HwOntRecentCallRecordsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ONT recent call records table. The indexes of this table are hwVoiceIfIndex, hwVoiceOntIndex, hwVoiceOntPortIndex, hwOntRecentCallRecordIndex" ::= { hwVoipOntObjects 22 } hwOntRecentCallRecordsEntry OBJECT-TYPE SYNTAX HwOntRecentCallRecordsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ONT recent call records table. The indexes of this entry are hwVoiceIfIndex, hwVoiceOntIndex, hwVoiceOntPortIndex, hwOntRecentCallRecordIndex" INDEX { hwVoiceIfIndex, hwVoiceOntIndex, hwVoiceOntPortIndex, hwOntRecentCallRecordIndex } ::= { hwOntRecentCallRecordsTable 1 } HwOntRecentCallRecordsEntry ::= SEQUENCE { hwOntRecentCallRecordIndex Integer32, hwOntRecentCallStartDate Unsigned32, hwOntRecentCallStartTime Unsigned32, hwOntRecentCallDuration Integer32, hwOntRecentCallType INTEGER, hwOntRecentCallCodec Integer32, hwOntRecentCallerNumber OCTET STRING, hwOntRecentCalleeNumber OCTET STRING, hwOntRecentCallPacketsSent Integer32, hwOntRecentCallPacketsReceived Integer32, hwOntRecentCallPacketsLost Integer32, hwOntRecentCallRoundTripDelay Integer32, hwOntRecentCallRcvInterArrivJitter Integer32, hwOntRecentCallMosLq Integer32 } hwOntRecentCallRecordIndex OBJECT-TYPE SYNTAX Integer32 (1..20) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the index of the call record. If the index is 1, it indicates the last call that has ended on the port. If this index is 2, it indicates the penultimate call that has ended on the port." ::= { hwOntRecentCallRecordsEntry 1 } hwOntRecentCallStartDate OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the start date of the call. 'AAAABBCC' indicates the date, among which, 'AAAA' indicates the year, 'BB' indicates the month, and 'CC' indicates the day." ::= { hwOntRecentCallRecordsEntry 2 } hwOntRecentCallStartTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the start time of the call. 'AABBCCDD' indicates the time, among which, 'AA' indicates the hour, 'BB' indicates the minute, 'CC' indicates the second, 'DD' is unused and reserved. " ::= { hwOntRecentCallRecordsEntry 3 } hwOntRecentCallDuration OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the duration of the call (unit: second)." ::= { hwOntRecentCallRecordsEntry 4 } hwOntRecentCallType OBJECT-TYPE SYNTAX INTEGER { outgoingCall(1), incomingCall(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the type of the call. Options: 1.outgoingCall(1) -indicates the call is a outgoing call 2.incomingCall(2) -indicates the call is a incoming call " ::= { hwOntRecentCallRecordsEntry 5 } hwOntRecentCallCodec OBJECT-TYPE SYNTAX Integer32 (0..18|250) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the codec used in the call. Codec points are assigned as follows: 0: G.711U 1: Reserved 2: G.726 3: GSM 4: G.723 5: DVI4-8K 6: DVI4-16K 7: LPC 8: G.711A 9: G.722 10: L16-2 channels 11: L16-1 channels 12: QCELP 13: CN 14: MPA 15: G.728 16: DVI4-11K 17: DVI4-22K 18: G.729 250: T.38 " ::= { hwOntRecentCallRecordsEntry 6 } hwOntRecentCallerNumber OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the calling number." ::= { hwOntRecentCallRecordsEntry 7 } hwOntRecentCalleeNumber OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the called number." ::= { hwOntRecentCallRecordsEntry 8 } hwOntRecentCallPacketsSent OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of packets sent during the call.." ::= { hwOntRecentCallRecordsEntry 9 } hwOntRecentCallPacketsReceived OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of packets received during the call." ::= { hwOntRecentCallRecordsEntry 10 } hwOntRecentCallPacketsLost OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of packets discarded during the call." ::= { hwOntRecentCallRecordsEntry 11 } hwOntRecentCallRoundTripDelay OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the loop delay of the call (unit: ms)." ::= { hwOntRecentCallRecordsEntry 12 } hwOntRecentCallRcvInterArrivJitter OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the jitter of the call in the Rx direction (unit: ms)." ::= { hwOntRecentCallRecordsEntry 13 } hwOntRecentCallMosLq OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the average MOS value of the call (this value has been increased by 10 times)." ::= { hwOntRecentCallRecordsEntry 14 } hwOntVoipAlarmCfgTable OBJECT IDENTIFIER ::= { hwVoipOntObjects 23 } hwOntAlarmMassSipAlarmThreshold OBJECT-TYPE SYNTAX Integer32 (10..1000) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the threshold for mass SIP alarm. Default: 100" ::= { hwOntVoipAlarmCfgTable 1 } hwOntVoipSingleAlarmSwitch OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the switch for single ONT voip alarm. Options: 1.disable(1) -indicates the single alarm switch is off 2.enable(2) -indicates the single alarm switch is on Default:disable(1) " DEFVAL { disable } ::= { hwOntVoipAlarmCfgTable 2 } hwOntVoipMassAlarmSwitch OBJECT-TYPE SYNTAX Integer32 { disable(1), enable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the switch for mass ONT voip alarm Options: 1.disable(1) -indicates the mass alarm switch is off 2.enable(2) -indicates the mass alarm switch is on Default:disable(1) " DEFVAL { disable } ::= { hwOntVoipAlarmCfgTable 3 } hwOntVoipMassEventSwitch OBJECT-TYPE SYNTAX Integer32 { disable(1), enable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the switch for mass ONT voip alarm event in 15 minutes Options: 1.disable(1) -indicates the mass event switch is off 2.enable(2) -indicates the mass event switch is on Default:disable(1) " DEFVAL { disable } ::= { hwOntVoipAlarmCfgTable 4 } hwOntVoipMassEventContent OBJECT-TYPE SYNTAX Integer32 (1..15) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the content for mass ONT voip alarm event in 15 minutes. The mass event content list: 1 -indicates MG interface fault 2 -indicates SIP user register timeout 3 -indicates MG interface fault, SIP user register timeout 4 -indicates SIP user register fail 5 -indicates MG interface fault, SIP user register fail 6 -indicates SIP user register timeout, SIP user register fail 7 -indicates MG interface fault, SIP user register timeout, SIP user register fail 8 -indicates SIP user authenticate fail 9 -indicates MG interface fault, SIP user authenticate fail 10 -indicates SIP user register timeout, SIP user authenticate fail 11 -indicates MG interface fault, SIP user register timeout, SIP user authenticate fail 12 -indicates SIP user register fail, SIP user authenticate fail 13 -indicates MG interface fault, SIP user register fail, SIP user authenticate fail 14 -indicates SIP user register timeout, SIP user register fail, SIP user authenticate fail 15 -indicates MG interface fault, SIP user register timeout, SIP user register fail, SIP user authenticate fail Default: 3" ::= { hwOntVoipAlarmCfgTable 5 } hwOntVoipMassEventThreshold OBJECT-TYPE SYNTAX Integer32 (10..1000) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the threshold for mass ONT voip alarm event in 15 minutes. Default: 100" ::= { hwOntVoipAlarmCfgTable 6 } hwOntVoipFaultEventStartHour OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..3)) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the start time(hour) of detecting mass event." ::= { hwOntVoipAlarmCfgTable 7 } hwOntVoipFaultEventStartMinute OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..3)) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the start time(minute) of detecting mass event." ::= { hwOntVoipAlarmCfgTable 8 } hwOntVoipFaultEventEndHour OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..3)) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the end time(hour) of detecting mass event." ::= { hwOntVoipAlarmCfgTable 9 } hwOntVoipFaultEventEndMinute OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..3)) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the end time(minute) of detecting mass event." ::= { hwOntVoipAlarmCfgTable 10 } hwOntVoipMassMGAlarmThreshold OBJECT-TYPE SYNTAX Integer32 (10..1000) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the threshold for mass MG interface alarm. Default: 100" ::= { hwOntVoipAlarmCfgTable 11 } hwOntVoipToneTable OBJECT-TYPE SYNTAX SEQUENCE OF HwOntVoipToneEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ONT VoIP tone table. The indexes of this table are hwOntVoipToneProfileIndex, hwOntVoipToneIndex" ::= { hwVoipOntObjects 24 } hwOntVoipToneEntry OBJECT-TYPE SYNTAX HwOntVoipToneEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ONT VoIP tone table. The indexes of this entry are hwOntVoipToneProfileIndex, hwOntVoipToneIndex" INDEX { hwOntVoipToneProfileIndex, hwOntVoipToneIndex } ::= { hwOntVoipToneTable 1 } HwOntVoipToneEntry ::= SEQUENCE { hwOntVoipToneProfileIndex Unsigned32, hwOntVoipToneIndex Unsigned32, hwOntVoipToneCadence1Freq1 Integer32, hwOntVoipToneCadence1Freq2 Integer32, hwOntVoipToneCadence1Freq3 Integer32, hwOntVoipToneCadence1Freq4 Integer32, hwOntVoipToneCadence1Level1 Integer32, hwOntVoipToneCadence1Level2 Integer32, hwOntVoipToneCadence1Level3 Integer32, hwOntVoipToneCadence1Level4 Integer32, hwOntVoipToneCadence1ModulationFreq Integer32, hwOntVoipToneCadence1ModulationLevel Integer32, hwOntVoipToneCadence1OnTime Integer32, hwOntVoipToneCadence1OffTime Integer32, hwOntVoipToneCadence1RepeatTimes Unsigned32, hwOntVoipToneCadence2Freq1 Integer32, hwOntVoipToneCadence2Freq2 Integer32, hwOntVoipToneCadence2Freq3 Integer32, hwOntVoipToneCadence2Freq4 Integer32, hwOntVoipToneCadence2Level1 Integer32, hwOntVoipToneCadence2Level2 Integer32, hwOntVoipToneCadence2Level3 Integer32, hwOntVoipToneCadence2Level4 Integer32, hwOntVoipToneCadence2ModulationFreq Integer32, hwOntVoipToneCadence2ModulationLevel Integer32, hwOntVoipToneCadence2OnTime Integer32, hwOntVoipToneCadence2OffTime Integer32, hwOntVoipToneCadence2RepeatTimes Unsigned32, hwOntVoipToneCadence3Freq1 Integer32, hwOntVoipToneCadence3Freq2 Integer32, hwOntVoipToneCadence3Freq3 Integer32, hwOntVoipToneCadence3Freq4 Integer32, hwOntVoipToneCadence3Level1 Integer32, hwOntVoipToneCadence3Level2 Integer32, hwOntVoipToneCadence3Level3 Integer32, hwOntVoipToneCadence3Level4 Integer32, hwOntVoipToneCadence3ModulationFreq Integer32, hwOntVoipToneCadence3ModulationLevel Integer32, hwOntVoipToneCadence3OnTime Integer32, hwOntVoipToneCadence3OffTime Integer32, hwOntVoipToneCadence3RepeatTimes Unsigned32, hwOntVoipToneCadence4Freq1 Integer32, hwOntVoipToneCadence4Freq2 Integer32, hwOntVoipToneCadence4Freq3 Integer32, hwOntVoipToneCadence4Freq4 Integer32, hwOntVoipToneCadence4Level1 Integer32, hwOntVoipToneCadence4Level2 Integer32, hwOntVoipToneCadence4Level3 Integer32, hwOntVoipToneCadence4Level4 Integer32, hwOntVoipToneCadence4ModulationFreq Integer32, hwOntVoipToneCadence4ModulationLevel Integer32, hwOntVoipToneCadence4OnTime Integer32, hwOntVoipToneCadence4OffTime Integer32, hwOntVoipToneCadence4RepeatTimes Unsigned32, hwOntVoipToneCadence5Freq1 Integer32, hwOntVoipToneCadence5Freq2 Integer32, hwOntVoipToneCadence5Freq3 Integer32, hwOntVoipToneCadence5Freq4 Integer32, hwOntVoipToneCadence5Level1 Integer32, hwOntVoipToneCadence5Level2 Integer32, hwOntVoipToneCadence5Level3 Integer32, hwOntVoipToneCadence5Level4 Integer32, hwOntVoipToneCadence5ModulationFreq Integer32, hwOntVoipToneCadence5ModulationLevel Integer32, hwOntVoipToneCadence5OnTime Integer32, hwOntVoipToneCadence5OffTime Integer32, hwOntVoipToneCadence5RepeatTimes Unsigned32, hwOntVoipToneCadence6Freq1 Integer32, hwOntVoipToneCadence6Freq2 Integer32, hwOntVoipToneCadence6Freq3 Integer32, hwOntVoipToneCadence6Freq4 Integer32, hwOntVoipToneCadence6Level1 Integer32, hwOntVoipToneCadence6Level2 Integer32, hwOntVoipToneCadence6Level3 Integer32, hwOntVoipToneCadence6Level4 Integer32, hwOntVoipToneCadence6ModulationFreq Integer32, hwOntVoipToneCadence6ModulationLevel Integer32, hwOntVoipToneCadence6OnTime Integer32, hwOntVoipToneCadence6OffTime Integer32, hwOntVoipToneCadence6RepeatTimes Unsigned32, hwOntVoipToneRowStatus RowStatus } hwOntVoipToneProfileIndex OBJECT-TYPE SYNTAX Unsigned32 (1..8) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the index of the voip ont profile." ::= { hwOntVoipToneEntry 1 } hwOntVoipToneIndex OBJECT-TYPE SYNTAX Unsigned32 (1..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the index of the ont voip tone. Options: 1. Busy 2. Confirmation 3. Dial 4. Message waiting 5. Off hook warning (receiver off hook) 6. Ringback (audible ring) 7. Reorder 8. Stutter dial 9. Call waiting 1 10. Call waiting 2 11. Call waiting 3 12. Call waiting 4 13. Alerting signal 14. Special dial 15. Special info 16. Release 17. Congestion 18. User defined 1 19. User defined 2 20. User defined 3 21. User defined 4 22..32. Reserved 33. Intrusion 34. Dead tone 35..223. Reserved 224..255. Vendor-specific codes, not to be standardized" ::= { hwOntVoipToneEntry 2 } hwOntVoipToneCadence1Freq1 OBJECT-TYPE SYNTAX Integer32 (0..65534) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the tone frequency 1 used by cadence 1, which can be single-frequency, dual-frequency, three-frequency, and four-frequency. Single-frequency tone: Only freq1 is configured. Dual-frequency tone: freq1 and freq2 are configured. Three-frequency tone: freq1, freq2 and freq3 are configured. Four-frequency tone: freq1, freq2, freq3 and freq4 are configured. Value 0 indicates that the tone frequency is invalid or is not set. Unit: Hz. This parameter is mandatory. " ::= { hwOntVoipToneEntry 3 } hwOntVoipToneCadence1Freq2 OBJECT-TYPE SYNTAX Integer32 (0..65534) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the tone frequency 2 used by cadence 1, which can be single-frequency, dual-frequency, three-frequency, and four-frequency. Single-frequency tone: Only freq1 is configured. Dual-frequency tone: freq1 and freq2 are configured. Three-frequency tone: freq1, freq2 and freq3 are configured. Four-frequency tone: freq1, freq2, freq3 and freq4 are configured. Value 0 indicates that the tone frequency is invalid or is not set. Unit: Hz. This parameter is optional. " ::= { hwOntVoipToneEntry 4 } hwOntVoipToneCadence1Freq3 OBJECT-TYPE SYNTAX Integer32 (0..65534) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the tone frequency 3 used by cadence 1, which can be single-frequency, dual-frequency, three-frequency, and four-frequency. Single-frequency tone: Only freq1 is configured. Dual-frequency tone: freq1 and freq2 are configured. Three-frequency tone: freq1, freq2 and freq3 are configured. Four-frequency tone: freq1, freq2, freq3 and freq4 are configured. Value 0 indicates that the tone frequency is invalid or is not set. Unit: Hz. This parameter is optional. " ::= { hwOntVoipToneEntry 5 } hwOntVoipToneCadence1Freq4 OBJECT-TYPE SYNTAX Integer32 (0..65534) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the tone frequency 4 used by cadence 1, which can be single-frequency, dual-frequency, three-frequency, and four-frequency. Single-frequency tone: Only freq1 is configured. Dual-frequency tone: freq1 and freq2 are configured. Three-frequency tone: freq1, freq2 and freq3 are configured. Four-frequency tone: freq1, freq2, freq3 and freq4 are configured. Value 0 indicates that the tone frequency is invalid or is not set. Unit: Hz. This parameter is optional. " ::= { hwOntVoipToneEntry 6 } hwOntVoipToneCadence1Level1 OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the power level of the corresponding frequency component. It ranges from 0 (coded as 0) to -25.5 (coded as 255 ) dBm0 with 0.1 dB resolution. Three additional pairs of frequency-power components may be specified to define a complex tone. If a pair of possibilities is not to be used, its frequency field should be set to 0. This parameter is mandatory. " ::= { hwOntVoipToneEntry 7 } hwOntVoipToneCadence1Level2 OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the power level of the corresponding frequency component. It ranges from 0 (coded as 0) to -25.5 (coded as 255 ) dBm0 with 0.1 dB resolution. This parameter is optional." ::= { hwOntVoipToneEntry 8 } hwOntVoipToneCadence1Level3 OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the power level of the corresponding frequency component. It ranges from 0 (coded as 0) to -25.5 (coded as 255 ) dBm0 with 0.1 dB resolution. This parameter is optional." ::= { hwOntVoipToneEntry 9 } hwOntVoipToneCadence1Level4 OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the power level of the corresponding frequency component. It ranges from 0 (coded as 0) to -25.5 (coded as 255 ) dBm0 with 0.1 dB resolution. This parameter is optional." ::= { hwOntVoipToneEntry 10 } hwOntVoipToneCadence1ModulationFreq OBJECT-TYPE SYNTAX Integer32 (0..65534) MAX-ACCESS read-write STATUS current DESCRIPTION "The pair of frequency-power components allows the composite tone to be modulated (warble effect). If this effect is not to be used, the frequency should be set to 0. This parameter is optional." ::= { hwOntVoipToneEntry 11 } hwOntVoipToneCadence1ModulationLevel OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The pair of frequency-power components allows the composite tone to be modulated (warble effect). If this effect is not to be used, the frequency should be set to 0. This parameter is optional." ::= { hwOntVoipToneEntry 12 } hwOntVoipToneCadence1OnTime OBJECT-TYPE SYNTAX Integer32 (-1 | 1..65534) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the tone on duration of cadence 1. Value -1 indicates that the ringing duration is invalid or is not set. Unit: millisecond (ms). This parameter is mandatory." ::= { hwOntVoipToneEntry 13 } hwOntVoipToneCadence1OffTime OBJECT-TYPE SYNTAX Integer32 (-1 | 1..65534) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the tone off duration of cadence 1. If the tone is off, the frequency and power fields are not meaningful. Value -1 indicates that the ringing duration is invalid or is not set. Unit: millisecond (ms). This parameter is optional." ::= { hwOntVoipToneEntry 14 } hwOntVoipToneCadence1RepeatTimes OBJECT-TYPE SYNTAX Unsigned32 (1..8) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the times of playing cadence 1. If this parameter is set, the cadence is played for the specified times according to the ratio of ontime to offtime. This parameter is optional. Default: 1 " ::= { hwOntVoipToneEntry 15 } hwOntVoipToneCadence2Freq1 OBJECT-TYPE SYNTAX Integer32 (0..65534) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the tone frequency 1 used by cadence 2, which can be single-frequency, dual-frequency, three-frequency, and four-frequency. Single-frequency tone: Only freq1 is configured. Dual-frequency tone: freq1 and freq2 are configured. Three-frequency tone: freq1, freq2 and freq3 are configured. Four-frequency tone: freq1, freq2, freq3 and freq4 are configured. Value 0 indicates that the tone frequency is invalid or is not set. Unit: Hz. This parameter is optional. " ::= { hwOntVoipToneEntry 16 } hwOntVoipToneCadence2Freq2 OBJECT-TYPE SYNTAX Integer32 (0..65534) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the tone frequency 2 used by cadence 2, which can be single-frequency, dual-frequency, three-frequency, and four-frequency. Single-frequency tone: Only freq1 is configured. Dual-frequency tone: freq1 and freq2 are configured. Three-frequency tone: freq1, freq2 and freq3 are configured. Four-frequency tone: freq1, freq2, freq3 and freq4 are configured. Value 0 indicates that the tone frequency is invalid or is not set. Unit: Hz. This parameter is optional. " ::= { hwOntVoipToneEntry 17 } hwOntVoipToneCadence2Freq3 OBJECT-TYPE SYNTAX Integer32 (0..65534) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the tone frequency 3 used by cadence 2, which can be single-frequency, dual-frequency, three-frequency, and four-frequency. Single-frequency tone: Only freq1 is configured. Dual-frequency tone: freq1 and freq2 are configured. Three-frequency tone: freq1, freq2 and freq3 are configured. Four-frequency tone: freq1, freq2, freq3 and freq4 are configured. Value 0 indicates that the tone frequency is invalid or is not set. Unit: Hz. This parameter is optional. " ::= { hwOntVoipToneEntry 18 } hwOntVoipToneCadence2Freq4 OBJECT-TYPE SYNTAX Integer32 (0..65534) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the tone frequency 4 used by cadence 2, which can be single-frequency, dual-frequency, three-frequency, and four-frequency. Single-frequency tone: Only freq1 is configured. Dual-frequency tone: freq1 and freq2 are configured. Three-frequency tone: freq1, freq2 and freq3 are configured. Four-frequency tone: freq1, freq2, freq3 and freq4 are configured. Value 0 indicates that the tone frequency is invalid or is not set. Unit: Hz. This parameter is optional. " ::= { hwOntVoipToneEntry 19 } hwOntVoipToneCadence2Level1 OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the power level of the corresponding frequency component. It ranges from 0 (coded as 0) to -25.5 (coded as 255 ) dBm0 with 0.1 dB resolution. Three additional pairs of frequency-power components may be specified to define a complex tone. If a pair of possibilities is not to be used, its frequency field should be set to 0. This parameter is optional. " ::= { hwOntVoipToneEntry 20 } hwOntVoipToneCadence2Level2 OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the power level of the corresponding frequency component. It ranges from 0 (coded as 0) to -25.5 (coded as 255 ) dBm0 with 0.1 dB resolution. This parameter is optional." ::= { hwOntVoipToneEntry 21 } hwOntVoipToneCadence2Level3 OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the power level of the corresponding frequency component. It ranges from 0 (coded as 0) to -25.5 (coded as 255 ) dBm0 with 0.1 dB resolution. This parameter is optional." ::= { hwOntVoipToneEntry 22 } hwOntVoipToneCadence2Level4 OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the power level of the corresponding frequency component. It ranges from 0 (coded as 0) to -25.5 (coded as 255 ) dBm0 with 0.1 dB resolution. This parameter is optional." ::= { hwOntVoipToneEntry 23 } hwOntVoipToneCadence2ModulationFreq OBJECT-TYPE SYNTAX Integer32 (0..65534) MAX-ACCESS read-write STATUS current DESCRIPTION "The pair of frequency-power components allows the composite tone to be modulated (warble effect). If this effect is not to be used, the frequency should be set to 0. This parameter is optional." ::= { hwOntVoipToneEntry 24 } hwOntVoipToneCadence2ModulationLevel OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The pair of frequency-power components allows the composite tone to be modulated (warble effect). If this effect is not to be used, the frequency should be set to 0. This parameter is optional." ::= { hwOntVoipToneEntry 25 } hwOntVoipToneCadence2OnTime OBJECT-TYPE SYNTAX Integer32 (-1 | 1..65534) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the tone on duration of cadence 2. Value -1 indicates that the ringing duration is invalid or is not set. Unit: millisecond (ms). This parameter is optional." ::= { hwOntVoipToneEntry 26 } hwOntVoipToneCadence2OffTime OBJECT-TYPE SYNTAX Integer32 (-1 | 1..65534) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the tone off duration of cadence 2. If the tone is off, the frequency and power fields are not meaningful. Value -1 indicates that the ringing duration is invalid or is not set. Unit: millisecond (ms). This parameter is optional." ::= { hwOntVoipToneEntry 27 } hwOntVoipToneCadence2RepeatTimes OBJECT-TYPE SYNTAX Unsigned32 (1..8) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the times of playing cadence 2. If this parameter is set, the cadence is played for the specified times according to the ratio of ontime to offtime. This parameter is optional. Default: 1 " ::= { hwOntVoipToneEntry 28 } hwOntVoipToneCadence3Freq1 OBJECT-TYPE SYNTAX Integer32 (0..65534) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the tone frequency 1 used by cadence 3, which can be single-frequency, dual-frequency, three-frequency, and four-frequency. Single-frequency tone: Only freq1 is configured. Dual-frequency tone: freq1 and freq2 are configured. Three-frequency tone: freq1, freq2 and freq3 are configured. Four-frequency tone: freq1, freq2, freq3 and freq4 are configured. Value 0 indicates that the tone frequency is invalid or is not set. Unit: Hz. This parameter is optional. " ::= { hwOntVoipToneEntry 29 } hwOntVoipToneCadence3Freq2 OBJECT-TYPE SYNTAX Integer32 (0..65534) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the tone frequency 2 used by cadence 3, which can be single-frequency, dual-frequency, three-frequency, and four-frequency. Single-frequency tone: Only freq1 is configured. Dual-frequency tone: freq1 and freq2 are configured. Three-frequency tone: freq1, freq2 and freq3 are configured. Four-frequency tone: freq1, freq2, freq3 and freq4 are configured. Value 0 indicates that the tone frequency is invalid or is not set. Unit: Hz. This parameter is optional. " ::= { hwOntVoipToneEntry 30 } hwOntVoipToneCadence3Freq3 OBJECT-TYPE SYNTAX Integer32 (0..65534) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the tone frequency 3 used by cadence 3, which can be single-frequency, dual-frequency, three-frequency, and four-frequency. Single-frequency tone: Only freq1 is configured. Dual-frequency tone: freq1 and freq2 are configured. Three-frequency tone: freq1, freq2 and freq3 are configured. Four-frequency tone: freq1, freq2, freq3 and freq4 are configured. Value 0 indicates that the tone frequency is invalid or is not set. Unit: Hz. This parameter is optional. " ::= { hwOntVoipToneEntry 31 } hwOntVoipToneCadence3Freq4 OBJECT-TYPE SYNTAX Integer32 (0..65534) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the tone frequency 4 used by cadence 3, which can be single-frequency, dual-frequency, three-frequency, and four-frequency. Single-frequency tone: Only freq1 is configured. Dual-frequency tone: freq1 and freq2 are configured. Three-frequency tone: freq1, freq2 and freq3 are configured. Four-frequency tone: freq1, freq2, freq3 and freq4 are configured. Value 0 indicates that the tone frequency is invalid or is not set. Unit: Hz. This parameter is optional. " ::= { hwOntVoipToneEntry 32 } hwOntVoipToneCadence3Level1 OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the power level of the corresponding frequency component. It ranges from 0 (coded as 0) to -25.5 (coded as 255 ) dBm0 with 0.1 dB resolution. Three additional pairs of frequency-power components may be specified to define a complex tone. If a pair of possibilities is not to be used, its frequency field should be set to 0. This parameter is optional. " ::= { hwOntVoipToneEntry 33 } hwOntVoipToneCadence3Level2 OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the power level of the corresponding frequency component. It ranges from 0 (coded as 0) to -25.5 (coded as 255 ) dBm0 with 0.1 dB resolution. This parameter is optional." ::= { hwOntVoipToneEntry 34 } hwOntVoipToneCadence3Level3 OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the power level of the corresponding frequency component. It ranges from 0 (coded as 0) to -25.5 (coded as 255 ) dBm0 with 0.1 dB resolution. This parameter is optional." ::= { hwOntVoipToneEntry 35 } hwOntVoipToneCadence3Level4 OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the power level of the corresponding frequency component. It ranges from 0 (coded as 0) to -25.5 (coded as 255 ) dBm0 with 0.1 dB resolution. This parameter is optional." ::= { hwOntVoipToneEntry 36 } hwOntVoipToneCadence3ModulationFreq OBJECT-TYPE SYNTAX Integer32 (0..65534) MAX-ACCESS read-write STATUS current DESCRIPTION "The pair of frequency-power components allows the composite tone to be modulated (warble effect). If this effect is not to be used, the frequency should be set to 0. This parameter is optional." ::= { hwOntVoipToneEntry 37 } hwOntVoipToneCadence3ModulationLevel OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The pair of frequency-power components allows the composite tone to be modulated (warble effect). If this effect is not to be used, the frequency should be set to 0. This parameter is optional." ::= { hwOntVoipToneEntry 38 } hwOntVoipToneCadence3OnTime OBJECT-TYPE SYNTAX Integer32 (-1 | 1..65534) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the tone on duration of cadence 3. Value -1 indicates that the ringing duration is invalid or is not set. Unit: millisecond (ms). This parameter is optional." ::= { hwOntVoipToneEntry 39 } hwOntVoipToneCadence3OffTime OBJECT-TYPE SYNTAX Integer32 (-1 | 1..65534) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the tone off duration of cadence 3. If the tone is off, the frequency and power fields are not meaningful. Value -1 indicates that the ringing duration is invalid or is not set. Unit: millisecond (ms). This parameter is optional." ::= { hwOntVoipToneEntry 40 } hwOntVoipToneCadence3RepeatTimes OBJECT-TYPE SYNTAX Unsigned32 (1..8) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the times of playing cadence 3. If this parameter is set, the cadence is played for the specified times according to the ratio of ontime to offtime. This parameter is optional. Default: 1 " ::= { hwOntVoipToneEntry 41 } hwOntVoipToneCadence4Freq1 OBJECT-TYPE SYNTAX Integer32 (0..65534) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the tone frequency 1 used by cadence 4, which can be single-frequency, dual-frequency, three-frequency, and four-frequency. Single-frequency tone: Only freq1 is configured. Dual-frequency tone: freq1 and freq2 are configured. Three-frequency tone: freq1, freq2 and freq3 are configured. Four-frequency tone: freq1, freq2, freq3 and freq4 are configured. Value 0 indicates that the tone frequency is invalid or is not set. Unit: Hz. This parameter is optional. " ::= { hwOntVoipToneEntry 42 } hwOntVoipToneCadence4Freq2 OBJECT-TYPE SYNTAX Integer32 (0..65534) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the tone frequency 2 used by cadence 4, which can be single-frequency, dual-frequency, three-frequency, and four-frequency. Single-frequency tone: Only freq1 is configured. Dual-frequency tone: freq1 and freq2 are configured. Three-frequency tone: freq1, freq2 and freq3 are configured. Four-frequency tone: freq1, freq2, freq3 and freq4 are configured. Value 0 indicates that the tone frequency is invalid or is not set. Unit: Hz. This parameter is optional. " ::= { hwOntVoipToneEntry 43 } hwOntVoipToneCadence4Freq3 OBJECT-TYPE SYNTAX Integer32 (0..65534) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the tone frequency 3 used by cadence 4, which can be single-frequency, dual-frequency, three-frequency, and four-frequency. Single-frequency tone: Only freq1 is configured. Dual-frequency tone: freq1 and freq2 are configured. Three-frequency tone: freq1, freq2 and freq3 are configured. Four-frequency tone: freq1, freq2, freq3 and freq4 are configured. Value 0 indicates that the tone frequency is invalid or is not set. Unit: Hz. This parameter is optional. " ::= { hwOntVoipToneEntry 44 } hwOntVoipToneCadence4Freq4 OBJECT-TYPE SYNTAX Integer32 (0..65534) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the tone frequency 4 used by cadence 4, which can be single-frequency, dual-frequency, three-frequency, and four-frequency. Single-frequency tone: Only freq1 is configured. Dual-frequency tone: freq1 and freq2 are configured. Three-frequency tone: freq1, freq2 and freq3 are configured. Four-frequency tone: freq1, freq2, freq3 and freq4 are configured. Value 0 indicates that the tone frequency is invalid or is not set. Unit: Hz. This parameter is optional. " ::= { hwOntVoipToneEntry 45 } hwOntVoipToneCadence4Level1 OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the power level of the corresponding frequency component. It ranges from 0 (coded as 0) to -25.5 (coded as 255 ) dBm0 with 0.1 dB resolution. Three additional pairs of frequency-power components may be specified to define a complex tone. If a pair of possibilities is not to be used, its frequency field should be set to 0. This parameter is optional." ::= { hwOntVoipToneEntry 46 } hwOntVoipToneCadence4Level2 OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the power level of the corresponding frequency component. It ranges from 0 (coded as 0) to -25.5 (coded as 255 ) dBm0 with 0.1 dB resolution. This parameter is optional." ::= { hwOntVoipToneEntry 47 } hwOntVoipToneCadence4Level3 OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the power level of the corresponding frequency component. It ranges from 0 (coded as 0) to -25.5 (coded as 255 ) dBm0 with 0.1 dB resolution. This parameter is optional." ::= { hwOntVoipToneEntry 48 } hwOntVoipToneCadence4Level4 OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the power level of the corresponding frequency component. It ranges from 0 (coded as 0) to -25.5 (coded as 255 ) dBm0 with 0.1 dB resolution. This parameter is optional." ::= { hwOntVoipToneEntry 49 } hwOntVoipToneCadence4ModulationFreq OBJECT-TYPE SYNTAX Integer32 (0..65534) MAX-ACCESS read-write STATUS current DESCRIPTION "The pair of frequency-power components allows the composite tone to be modulated (warble effect). If this effect is not to be used, the frequency should be set to 0. This parameter is optional." ::= { hwOntVoipToneEntry 50 } hwOntVoipToneCadence4ModulationLevel OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The pair of frequency-power components allows the composite tone to be modulated (warble effect). If this effect is not to be used, the frequency should be set to 0. This parameter is optional." ::= { hwOntVoipToneEntry 51 } hwOntVoipToneCadence4OnTime OBJECT-TYPE SYNTAX Integer32 (-1 | 1..65534) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the tone on duration of cadence 4. Value -1 indicates that the ringing duration is invalid or is not set. Unit: millisecond (ms). This parameter is optional." ::= { hwOntVoipToneEntry 52 } hwOntVoipToneCadence4OffTime OBJECT-TYPE SYNTAX Integer32 (-1 | 1..65534) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the tone off duration of cadence 4. If the tone is off, the frequency and power fields are not meaningful. Value -1 indicates that the ringing duration is invalid or is not set. Unit: millisecond (ms). This parameter is optional." ::= { hwOntVoipToneEntry 53 } hwOntVoipToneCadence4RepeatTimes OBJECT-TYPE SYNTAX Unsigned32 (1..8) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the times of playing cadence 4. If this parameter is set, the cadence is played for the specified times according to the ratio of ontime to offtime. This parameter is optional. Default: 1 " ::= { hwOntVoipToneEntry 54 } hwOntVoipToneCadence5Freq1 OBJECT-TYPE SYNTAX Integer32 (0..65534) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the tone frequency 1 used by cadence 5, which can be single-frequency, dual-frequency, three-frequency, and four-frequency. Single-frequency tone: Only freq1 is configured. Dual-frequency tone: freq1 and freq2 are configured. Three-frequency tone: freq1, freq2 and freq3 are configured. Four-frequency tone: freq1, freq2, freq3 and freq4 are configured. Value 0 indicates that the tone frequency is invalid or is not set. Unit: Hz. This parameter is optional. " ::= { hwOntVoipToneEntry 55 } hwOntVoipToneCadence5Freq2 OBJECT-TYPE SYNTAX Integer32 (0..65534) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the tone frequency 2 used by cadence 5, which can be single-frequency, dual-frequency, three-frequency, and four-frequency. Single-frequency tone: Only freq1 is configured. Dual-frequency tone: freq1 and freq2 are configured. Three-frequency tone: freq1, freq2 and freq3 are configured. Four-frequency tone: freq1, freq2, freq3 and freq4 are configured. Value 0 indicates that the tone frequency is invalid or is not set. Unit: Hz. This parameter is optional. " ::= { hwOntVoipToneEntry 56 } hwOntVoipToneCadence5Freq3 OBJECT-TYPE SYNTAX Integer32 (0..65534) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the tone frequency 3 used by cadence 5, which can be single-frequency, dual-frequency, three-frequency, and four-frequency. Single-frequency tone: Only freq1 is configured. Dual-frequency tone: freq1 and freq2 are configured. Three-frequency tone: freq1, freq2 and freq3 are configured. Four-frequency tone: freq1, freq2, freq3 and freq4 are configured. Value 0 indicates that the tone frequency is invalid or is not set. Unit: Hz. This parameter is optional. " ::= { hwOntVoipToneEntry 57 } hwOntVoipToneCadence5Freq4 OBJECT-TYPE SYNTAX Integer32 (0..65534) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the tone frequency 4 used by cadence 5, which can be single-frequency, dual-frequency, three-frequency, and four-frequency. Single-frequency tone: Only freq1 is configured. Dual-frequency tone: freq1 and freq2 are configured. Three-frequency tone: freq1, freq2 and freq3 are configured. Four-frequency tone: freq1, freq2, freq3 and freq4 are configured. Value 0 indicates that the tone frequency is invalid or is not set. Unit: Hz. This parameter is optional. " ::= { hwOntVoipToneEntry 58 } hwOntVoipToneCadence5Level1 OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the power level of the corresponding frequency component. It ranges from 0 (coded as 0) to -25.5 (coded as 255 ) dBm0 with 0.1 dB resolution. Three additional pairs of frequency-power components may be specified to define a complex tone. If a pair of possibilities is not to be used, its frequency field should be set to 0. This parameter is optional." ::= { hwOntVoipToneEntry 59 } hwOntVoipToneCadence5Level2 OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the power level of the corresponding frequency component. It ranges from 0 (coded as 0) to -25.5 (coded as 255 ) dBm0 with 0.1 dB resolution. This parameter is optional." ::= { hwOntVoipToneEntry 60 } hwOntVoipToneCadence5Level3 OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the power level of the corresponding frequency component. It ranges from 0 (coded as 0) to -25.5 (coded as 255 ) dBm0 with 0.1 dB resolution. This parameter is optional." ::= { hwOntVoipToneEntry 61 } hwOntVoipToneCadence5Level4 OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the power level of the corresponding frequency component. It ranges from 0 (coded as 0) to -25.5 (coded as 255 ) dBm0 with 0.1 dB resolution. This parameter is optional." ::= { hwOntVoipToneEntry 62 } hwOntVoipToneCadence5ModulationFreq OBJECT-TYPE SYNTAX Integer32 (0..65534) MAX-ACCESS read-write STATUS current DESCRIPTION "The pair of frequency-power components allows the composite tone to be modulated (warble effect). If this effect is not to be used, the frequency should be set to 0. This parameter is optional." ::= { hwOntVoipToneEntry 63 } hwOntVoipToneCadence5ModulationLevel OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The pair of frequency-power components allows the composite tone to be modulated (warble effect). If this effect is not to be used, the frequency should be set to 0. This parameter is optional." ::= { hwOntVoipToneEntry 64 } hwOntVoipToneCadence5OnTime OBJECT-TYPE SYNTAX Integer32 (-1 | 1..65534) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the tone on duration of cadence 5. Value -1 indicates that the ringing duration is invalid or is not set. Unit: millisecond (ms). This parameter is optional." ::= { hwOntVoipToneEntry 65 } hwOntVoipToneCadence5OffTime OBJECT-TYPE SYNTAX Integer32 (-1 | 1..65534) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the tone off duration of cadence 5. If the tone is off, the frequency and power fields are not meaningful. Value -1 indicates that the ringing duration is invalid or is not set. Unit: millisecond (ms). This parameter is optional." ::= { hwOntVoipToneEntry 66 } hwOntVoipToneCadence5RepeatTimes OBJECT-TYPE SYNTAX Unsigned32 (1..8) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the times of playing cadence 5. If this parameter is set, the cadence is played for the specified times according to the ratio of ontime to offtime. This parameter is optional. Default: 1 " ::= { hwOntVoipToneEntry 67 } hwOntVoipToneCadence6Freq1 OBJECT-TYPE SYNTAX Integer32 (0..65534) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the tone frequency 1 used by cadence 6, which can be single-frequency, dual-frequency, three-frequency, and four-frequency. Single-frequency tone: Only freq1 is configured. Dual-frequency tone: freq1 and freq2 are configured. Three-frequency tone: freq1, freq2 and freq3 are configured. Four-frequency tone: freq1, freq2, freq3 and freq4 are configured. Value 0 indicates that the tone frequency is invalid or is not set. Unit: Hz. This parameter is optional. " ::= { hwOntVoipToneEntry 68 } hwOntVoipToneCadence6Freq2 OBJECT-TYPE SYNTAX Integer32 (0..65534) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the tone frequency 2 used by cadence 6, which can be single-frequency, dual-frequency, three-frequency, and four-frequency. Single-frequency tone: Only freq1 is configured. Dual-frequency tone: freq1 and freq2 are configured. Three-frequency tone: freq1, freq2 and freq3 are configured. Four-frequency tone: freq1, freq2, freq3 and freq4 are configured. Value 0 indicates that the tone frequency is invalid or is not set. Unit: Hz. This parameter is optional. " ::= { hwOntVoipToneEntry 69 } hwOntVoipToneCadence6Freq3 OBJECT-TYPE SYNTAX Integer32 (0..65534) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the tone frequency 3 used by cadence 6, which can be single-frequency, dual-frequency, three-frequency, and four-frequency. Single-frequency tone: Only freq1 is configured. Dual-frequency tone: freq1 and freq2 are configured. Three-frequency tone: freq1, freq2 and freq3 are configured. Four-frequency tone: freq1, freq2, freq3 and freq4 are configured. Value 0 indicates that the tone frequency is invalid or is not set. Unit: Hz. This parameter is optional. " ::= { hwOntVoipToneEntry 70 } hwOntVoipToneCadence6Freq4 OBJECT-TYPE SYNTAX Integer32 (0..65534) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the tone frequency 4 used by cadence 6, which can be single-frequency, dual-frequency, three-frequency, and four-frequency. Single-frequency tone: Only freq1 is configured. Dual-frequency tone: freq1 and freq2 are configured. Three-frequency tone: freq1, freq2 and freq3 are configured. Four-frequency tone: freq1, freq2, freq3 and freq4 are configured. Value 0 indicates that the tone frequency is invalid or is not set. Unit: Hz. This parameter is optional. " ::= { hwOntVoipToneEntry 71 } hwOntVoipToneCadence6Level1 OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the power level of the corresponding frequency component. It ranges from 0 (coded as 0) to -25.5 (coded as 255 ) dBm0 with 0.1 dB resolution. Three additional pairs of frequency-power components may be specified to define a complex tone. If a pair of possibilities is not to be used, its frequency field should be set to 0. This parameter is optional. " ::= { hwOntVoipToneEntry 72 } hwOntVoipToneCadence6Level2 OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the power level of the corresponding frequency component. It ranges from 0 (coded as 0) to -25.5 (coded as 255 ) dBm0 with 0.1 dB resolution. This parameter is optional. " ::= { hwOntVoipToneEntry 73 } hwOntVoipToneCadence6Level3 OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the power level of the corresponding frequency component. It ranges from 0 (coded as 0) to -25.5 (coded as 255 ) dBm0 with 0.1 dB resolution. This parameter is optional. " ::= { hwOntVoipToneEntry 74 } hwOntVoipToneCadence6Level4 OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the power level of the corresponding frequency component. It ranges from 0 (coded as 0) to -25.5 (coded as 255 ) dBm0 with 0.1 dB resolution. This parameter is optional. " ::= { hwOntVoipToneEntry 75 } hwOntVoipToneCadence6ModulationFreq OBJECT-TYPE SYNTAX Integer32 (0..65534) MAX-ACCESS read-write STATUS current DESCRIPTION "The pair of frequency-power components allows the composite tone to be modulated (warble effect). If this effect is not to be used, the frequency should be set to 0. This parameter is optional. " ::= { hwOntVoipToneEntry 76 } hwOntVoipToneCadence6ModulationLevel OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The pair of frequency-power components allows the composite tone to be modulated (warble effect). If this effect is not to be used, the frequency should be set to 0. This parameter is optional. " ::= { hwOntVoipToneEntry 77 } hwOntVoipToneCadence6OnTime OBJECT-TYPE SYNTAX Integer32 (-1 | 1..65534) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the tone on duration of cadence 6. Value -1 indicates that the ringing duration is invalid or is not set. Unit: millisecond (ms). This parameter is optional." ::= { hwOntVoipToneEntry 78 } hwOntVoipToneCadence6OffTime OBJECT-TYPE SYNTAX Integer32 (-1 | 1..65534) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the tone off duration of cadence 6. If the tone is off, the frequency and power fields are not meaningful. Value -1 indicates that the ringing duration is invalid or is not set. Unit: millisecond (ms). This parameter is optional." ::= { hwOntVoipToneEntry 79 } hwOntVoipToneCadence6RepeatTimes OBJECT-TYPE SYNTAX Unsigned32 (1..8) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the times of playing cadence 6. If this parameter is set, the cadence is played for the specified times according to the ratio of ontime to offtime. This parameter is optional. Default: 1 " ::= { hwOntVoipToneEntry 80 } hwOntVoipToneRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Options: 1.active(1) -indicates active 2.notInService(2) -indicates not in service 3.notReady(3) -indicates not ready 4.createAndGo(4) -indicates create and go 5.createAndWait(5) -indicates create and wait 6.destroy(6) -indicates destroy Only 4 and 6 is support Now." ::= { hwOntVoipToneEntry 81 } hwOntVoipRingTable OBJECT-TYPE SYNTAX SEQUENCE OF HwOntVoipRingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ONT VoIP ring table. The indexes of this entry are hwOntVoipRingProfileIndex, hwOntVoipRingIndex" ::= { hwVoipOntObjects 25 } hwOntVoipRingEntry OBJECT-TYPE SYNTAX HwOntVoipRingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ONT VoIP ring table. The indexes of this entry are hwOntVoipRingProfileIndex, hwOntVoipRingIndex" INDEX { hwOntVoipRingProfileIndex, hwOntVoipRingIndex } ::= { hwOntVoipRingTable 1 } HwOntVoipRingEntry ::= SEQUENCE { hwOntVoipRingProfileIndex Unsigned32, hwOntVoipRingIndex Unsigned32, hwOntVoipRingCadence1OnTime Integer32, hwOntVoipRingCadence1OffTime Integer32, hwOntVoipRingCadence2OnTime Integer32, hwOntVoipRingCadence2OffTime Integer32, hwOntVoipRingCadence3OnTime Integer32, hwOntVoipRingCadence3OffTime Integer32, hwOntVoipRingRowStatus RowStatus } hwOntVoipRingProfileIndex OBJECT-TYPE SYNTAX Unsigned32 (1..8) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the index of the ont voip ring profile." ::= { hwOntVoipRingEntry 1 } hwOntVoipRingIndex OBJECT-TYPE SYNTAX Unsigned32 (1..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the index of the ont voip ring. Options: 1. Default 2. Splash 3..223. Reserved 224..255. Vendor-specific codes, not to be standardized" ::= { hwOntVoipRingEntry 2 } hwOntVoipRingCadence1OnTime OBJECT-TYPE SYNTAX Integer32 (-1 | 1..65534) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the ringing on duration of cadence 1. Unit: millisecond (ms). Value -1 indicates that the ringing duration is invalid or is not set. This parameter is mandatory. " ::= { hwOntVoipRingEntry 3 } hwOntVoipRingCadence1OffTime OBJECT-TYPE SYNTAX Integer32 (-1 | 1..65534) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the ringing off duration of cadence 1. Unit: millisecond (ms). Value -1 indicates that the ringing stop duration is invalid or is not set. This parameter is optional." ::= { hwOntVoipRingEntry 4 } hwOntVoipRingCadence2OnTime OBJECT-TYPE SYNTAX Integer32 (-1 | 1..65534) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the ringing on duration of cadence 2. Unit: millisecond (ms). Value -1 indicates that the ringing duration is invalid or is not set. This parameter is optional. " ::= { hwOntVoipRingEntry 5 } hwOntVoipRingCadence2OffTime OBJECT-TYPE SYNTAX Integer32 (-1 | 1..65534) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the ringing off duration of cadence 2. Unit: millisecond (ms). Value -1 indicates that the ringing stop duration is invalid or is not set. This parameter is optional." ::= { hwOntVoipRingEntry 6 } hwOntVoipRingCadence3OnTime OBJECT-TYPE SYNTAX Integer32 (-1 | 1..65534) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the ringing on duration of cadence 3. Unit: millisecond (ms). Value -1 indicates that the ringing duration is invalid or is not set. This parameter is optional. " ::= { hwOntVoipRingEntry 7 } hwOntVoipRingCadence3OffTime OBJECT-TYPE SYNTAX Integer32 (-1 | 1..65534) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the ringing off duration of cadence 3. Unit: millisecond (ms). Value -1 indicates that the ringing stop duration is invalid or is not set. This parameter is optional." ::= { hwOntVoipRingEntry 8 } hwOntVoipRingRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Options: 1.active(1) -indicates active 2.notInService(2) -indicates not in service 3.notReady(3) -indicates not ready 4.createAndGo(4) -indicates create and go 5.createAndWait(5) -indicates create and wait 6.destroy(6) -indicates destroy Only 4 and 6 is support Now." ::= { hwOntVoipRingEntry 9 } hwOntVoipSignalProfileTable OBJECT-TYPE SYNTAX SEQUENCE OF HwOntVoipSignalProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ONT VoIP signal profile table. The index of this table is hwOntVoipSignalProfileIndex." ::= { hwVoipOntObjects 26 } hwOntVoipSignalProfileEntry OBJECT-TYPE SYNTAX HwOntVoipSignalProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ONT VoIP signal profile table. The index of this entry is hwOntVoipSignalProfileIndex." INDEX { hwOntVoipSignalProfileIndex } ::= { hwOntVoipSignalProfileTable 1 } HwOntVoipSignalProfileEntry ::= SEQUENCE { hwOntVoipSignalProfileIndex Unsigned32, hwOntVoipSignalProfileName OCTET STRING, hwOntVoipSignalProfileBinNum Unsigned32, hwOntVoipSignalProfileCommit INTEGER, hwOntVoipSignalProfileCommitResult INTEGER, hwOntVoipSignalProfileRowStatus RowStatus } hwOntVoipSignalProfileIndex OBJECT-TYPE SYNTAX Unsigned32 (1..8) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the index of the ONT VoIP signal profile." ::= { hwOntVoipSignalProfileEntry 1 } hwOntVoipSignalProfileName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the name of the ONT VoIP signal profile." ::= { hwOntVoipSignalProfileEntry 2 } hwOntVoipSignalProfileBinNum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of ONT bound with ONT VoIP signal profile." ::= { hwOntVoipSignalProfileEntry 3 } hwOntVoipSignalProfileCommit OBJECT-TYPE SYNTAX INTEGER { commitExecute(1), clearResult(2), invalid(-1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the ONT VoIP signal profile Configuration Commit. Options: 1. commitExecute(1) - Execute the ONT VoIP signal profile configuration commit 2. clearResult(2) - Clear the commit result 3. invalid(-1) - Indicates that the query fails or no information is detected" ::= { hwOntVoipSignalProfileEntry 4 } hwOntVoipSignalProfileCommitResult OBJECT-TYPE SYNTAX INTEGER { success(1), fail(2), operating(3), invalid(-1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the commit result of a ONT VoIP signal profile, the aging time of the result is 20s. Options: 1. success(1) - Indicates that the commit result is success 2. fail(2) - Indicates that the commit result is fail 3. operating(3) - Indicates that the commit does not complete 4. invalid(-1) - Indicates that no commit is being operated " ::= { hwOntVoipSignalProfileEntry 5 } hwOntVoipSignalProfileRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Options: 1.active(1) -indicates active 2.notInService(2) -indicates not in service 3.notReady(3) -indicates not ready 4.createAndGo(4) -indicates create and go 5.createAndWait(5) -indicates create and wait 6.destroy(6) -indicates destroy Only 4 and 6 is support Now." ::= { hwOntVoipSignalProfileEntry 6 } hwOntVoipBindSignalProfileTable OBJECT-TYPE SYNTAX SEQUENCE OF HwOntVoipBindSignalProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ONT VoIP bind config table. The indexes of this table are hwVoiceIfIndex, hwVoiceOntIndex." ::= { hwVoipOntObjects 27 } hwOntVoipBindSignalProfileEntry OBJECT-TYPE SYNTAX HwOntVoipBindSignalProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ONT VoIP bind config table. The indexes of this entry are hwVoiceIfIndex, hwVoiceOntIndex." INDEX { hwVoiceIfIndex, hwVoiceOntIndex } ::= { hwOntVoipBindSignalProfileTable 1 } HwOntVoipBindSignalProfileEntry ::= SEQUENCE { hwOntVoipBindOprType INTEGER, hwOntVoipBindSignalProfileIndex Integer32 } hwOntVoipBindOprType OBJECT-TYPE SYNTAX INTEGER { bind(1), unbind(2), invalid(-1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the bind operator type. Options: 1. bind(1) - Indicates that the bind operator 2. unbind(2) - Indicates that the unbind operator 4. invalid(-1) - Indicates that the query fails or no information is detected" ::= { hwOntVoipBindSignalProfileEntry 1 } hwOntVoipBindSignalProfileIndex OBJECT-TYPE SYNTAX Integer32 (-1 | 1..8) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the index of bind voip signal profile." ::= { hwOntVoipBindSignalProfileEntry 2 } hwOntVoipIpIndexTable OBJECT-TYPE SYNTAX SEQUENCE OF HwOntVoipIpIndexEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ONT tr069 VoIP config table. The indexes of this table are hwVoiceIfIndex, hwVoiceOntIndex." ::= { hwVoipOntObjects 28 } hwOntVoipIpIndexEntry OBJECT-TYPE SYNTAX HwOntVoipIpIndexEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ONT tr069 VoIP config table. The indexes of this entry are hwVoiceIfIndex, hwVoiceOntIndex." INDEX { hwVoiceIfIndex, hwVoiceOntIndex } ::= { hwOntVoipIpIndexTable 1 } HwOntVoipIpIndexEntry ::= SEQUENCE { hwOntVoipIpIndexOprType INTEGER, hwOntVoipIpIndex Integer32 } hwOntVoipIpIndexOprType OBJECT-TYPE SYNTAX INTEGER { bind(1), unbind(2), invalid(-1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the bind operator type. Options: 1. bind(1) - Indicates that the bind operator 2. unbind(2) - Indicates that the unbind operator 4. invalid(-1) - Indicates that the query fails or no information is detected" ::= { hwOntVoipIpIndexEntry 1 } hwOntVoipIpIndex OBJECT-TYPE SYNTAX Integer32 (-1 | 0..3) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the IP index. Value -1 indicates that the query fails or no information is detected" ::= { hwOntVoipIpIndexEntry 2 } hwOntRecentVoipAlarmRecordTable OBJECT-TYPE SYNTAX SEQUENCE OF HwOntRecentVoipAlarmRecordEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ONT voip Alarm Record table. The indexes of this table is hwOntRecentVoipAlarmBlockIndex." ::= { hwVoipOntObjects 29 } hwOntRecentVoipAlarmRecordEntry OBJECT-TYPE SYNTAX HwOntRecentVoipAlarmRecordEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ONT voip Alarm Record config table. The indexes of this entry is hwOntRecentVoipAlarmBlockIndex." INDEX { hwOntRecentVoipAlarmBlockIndex } ::= { hwOntRecentVoipAlarmRecordTable 1 } HwOntRecentVoipAlarmRecordEntry ::= SEQUENCE { hwOntRecentVoipAlarmBlockIndex Integer32, hwOntRecentVoipAlarmOctetString OCTET STRING } hwOntRecentVoipAlarmBlockIndex OBJECT-TYPE SYNTAX Integer32 (1..200) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the index of the ONT voip Alarm Record." ::= { hwOntRecentVoipAlarmRecordEntry 1 } hwOntRecentVoipAlarmOctetString OBJECT-TYPE SYNTAX OCTET STRING (SIZE (2..902)) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the ONT voip Alarm Record. Every index indicates 50 records maximum. Every record includes 18 bytes. Record number() Year(2byte) : 65535-invalid Month(1byte) : 255-invalid Day(1byte) : 255-invalid Hour(1byte) : 255-invalid Minute(1byte): 255-invalid Second(1byte): 255-invalid Frame(1byte) Slot(1byte) Port(1byte) ONTID(2byte) ALARMSTATE(1Byte) -0 inactive,1 active ALARM Type(1 Byte) 1- MG fault 2- MG recover 3- SIP auth fail 4- SIP auth recover 5- SIP register timeout 6- SIP register time out recover 7- SIP register fail 8- SIP register fail recover ALARMPARA(4Byte)" ::= { hwOntRecentVoipAlarmRecordEntry 2 } hwOntCallerEmulateOperatorTrap NOTIFICATION-TYPE OBJECTS { hwOntPstnCallerEmulateTestRequestID, hwVoiceIfIndex, hwVoiceOntIndex, hwVoiceOntPortIndex, hwOntPstnCallerEmulateTestStatus, hwOntPstnCallerEmulateTestResult, hwOntPstnCallerEmulateCalledTelNo, hwOntPstnCallerEmulateReportTelNo} STATUS current DESCRIPTION "This notification indicates that the trap for ont caller emulate test result: 1. hwOntPstnCallerEmulateTestRequestID 2. hwVoiceIfIndex 3. hwVoiceOntIndex 4. hwVoiceOntPortIndex 5. hwOntPstnCallerEmulateTestStatus 6. hwOntPstnCallerEmulateTestResult 7. hwOntPstnCallerEmulateCalledTelNo 8. hwOntPstnCallerEmulateReportTelNo" ::= { hwVoipOntTraps 0 } hwOntCalledEmulateOperatorTrap NOTIFICATION-TYPE OBJECTS { hwOntPstnCalledEmulateTestRequestID, hwVoiceIfIndex, hwVoiceOntIndex, hwVoiceOntPortIndex, hwOntPstnCalledEmulateTestStatus, hwOntPstnCalledEmulateTestResult} STATUS current DESCRIPTION "This notification indicates that the trap for ont called emulate test result: 1. hwOntPstnCalledEmulateTestRequestID 2. hwVoiceIfIndex 3. hwVoiceOntIndex 4. hwVoiceOntPortIndex 5. hwOntPstnCalledEmulateTestStatus 6. hwOntPstnCalledEmulateTestResult" ::= { hwVoipOntTraps 1 } hwOntSipUserRegisterAuthAlarmTrap NOTIFICATION-TYPE OBJECTS { hwFrameIndex, hwSlotIndex, hwPortIndex, hwVoiceOntIndex, hwVoiceOntPortIndex} STATUS current DESCRIPTION "This notification indicates that the trap for ont sip user authenticate fail: 1. hwFrameIndex 2. hwSlotIndex 3. hwPortIndex 4. hwVoiceOntIndex 5. hwVoiceOntPortIndex" ::= { hwVoipOntTraps 2 } hwOntSipUserRegisterAuthRestoreAlarmTrap NOTIFICATION-TYPE OBJECTS { hwFrameIndex, hwSlotIndex, hwPortIndex, hwVoiceOntIndex, hwVoiceOntPortIndex} STATUS current DESCRIPTION "This notification indicates that the trap for ont sip user authenticate fail restore: 1. hwFrameIndex 2. hwSlotIndex 3. hwPortIndex 4. hwVoiceOntIndex 5. hwVoiceOntPortIndex" ::= { hwVoipOntTraps 3 } hwOntSipUserRegisterTimeoutAlarmTrap NOTIFICATION-TYPE OBJECTS { hwFrameIndex, hwSlotIndex, hwPortIndex, hwVoiceOntIndex, hwVoiceOntPortIndex} STATUS current DESCRIPTION "This notification indicates that the trap for ont sip user register time out: 1. hwFrameIndex 2. hwSlotIndex 3. hwPortIndex 4. hwVoiceOntIndex 5. hwVoiceOntPortIndex" ::= { hwVoipOntTraps 4 } hwOntSipUserRegisterTimeoutRestoreAlarmTrap NOTIFICATION-TYPE OBJECTS { hwFrameIndex, hwSlotIndex, hwPortIndex, hwVoiceOntIndex, hwVoiceOntPortIndex} STATUS current DESCRIPTION "This notification indicates that the trap for ont sip user register time out restore: 1. hwFrameIndex 2. hwSlotIndex 3. hwPortIndex 4. hwVoiceOntIndex 5. hwVoiceOntPortIndex" ::= { hwVoipOntTraps 5 } hwOntSipUserRegisterFailAlarmTrap NOTIFICATION-TYPE OBJECTS { hwFrameIndex, hwSlotIndex, hwPortIndex, hwVoiceOntIndex, hwVoiceOntPortIndex} STATUS current DESCRIPTION "This notification indicates that the trap for ont sip user register fail: 1. hwFrameIndex 2. hwSlotIndex 3. hwPortIndex 4. hwVoiceOntIndex 5. hwVoiceOntPortIndex" ::= { hwVoipOntTraps 6 } hwOntSipUserRegisterFailRestoreAlarmTrap NOTIFICATION-TYPE OBJECTS { hwFrameIndex, hwSlotIndex, hwPortIndex, hwVoiceOntIndex, hwVoiceOntPortIndex} STATUS current DESCRIPTION "This notification indicates that the trap for ont sip user register fail restore: 1. hwFrameIndex 2. hwSlotIndex 3. hwPortIndex 4. hwVoiceOntIndex 5. hwVoiceOntPortIndex" ::= { hwVoipOntTraps 7 } hwOntMgInterfaceFaultAlarmTrap NOTIFICATION-TYPE OBJECTS { hwFrameIndex, hwSlotIndex, hwPortIndex, hwVoiceOntIndex, hwVoiceOntMgId} STATUS current DESCRIPTION "This notification indicates that the trap for ont mg interface fault: 1. hwFrameIndex 2. hwSlotIndex 3. hwPortIndex 4. hwVoiceOntIndex 5. hwVoiceOntMgId" ::= { hwVoipOntTraps 8 } hwOntMgInterfaceRestoreAlarmTrap NOTIFICATION-TYPE OBJECTS { hwFrameIndex, hwSlotIndex, hwPortIndex, hwVoiceOntIndex, hwVoiceOntMgId} STATUS current DESCRIPTION "This notification indicates that the trap for ont mg interface restore: 1. hwFrameIndex 2. hwSlotIndex 3. hwPortIndex 4. hwVoiceOntIndex 5. hwVoiceOntMgId" ::= { hwVoipOntTraps 9 } hwOntMassSipUserRegisterAuthAlarmTrap NOTIFICATION-TYPE STATUS current DESCRIPTION "This notification indicates that the trap for a mass of ont sip users authenticate fail." ::= { hwVoipOntTraps 10 } hwOntMassSipUserRegisterAuthRestoreAlarmTrap NOTIFICATION-TYPE STATUS current DESCRIPTION "This notification indicates that the trap for a mass of ont sip users authenticate fail restore." ::= { hwVoipOntTraps 11 } hwOntMassSipUserRegisterTimeoutAlarmTrap NOTIFICATION-TYPE STATUS current DESCRIPTION "This notification indicates that the trap for a mass of ont sip users register time out." ::= { hwVoipOntTraps 12 } hwOntMassSipUserRegisterTimeoutRestoreAlarmTrap NOTIFICATION-TYPE STATUS current DESCRIPTION "This notification indicates that the trap for a mass of ont sip users register time out restore." ::= { hwVoipOntTraps 13 } hwOntMassSipUserRegisterFailAlarmTrap NOTIFICATION-TYPE STATUS current DESCRIPTION "This notification indicates that the trap for a mass of ont sip users register fail." ::= { hwVoipOntTraps 14 } hwOntMassSipUserRegisterFailRestoreAlarmTrap NOTIFICATION-TYPE STATUS current DESCRIPTION "This notification indicates that the trap for a mass of ont sip users register fail restore." ::= { hwVoipOntTraps 15 } hwOntMassVoipFaultEventTrap NOTIFICATION-TYPE OBJECTS { hwOntVoipFaultEventStartHour, hwOntVoipFaultEventStartMinute, hwOntVoipFaultEventEndHour, hwOntVoipFaultEventEndMinute, hwOntVoipMassEventThreshold} STATUS current DESCRIPTION "This notification indicates that the trap for a mass of ont voip fault in 15 minutes: 1. hwOntVoipFaultEventStartHour 2. hwOntVoipFaultEventStartMinute 3. hwOntVoipFaultEventEndHour 4. hwOntVoipFaultEventEndMinute 5. hwOntVoipMassEventThreshold" ::= { hwVoipOntTraps 16 } hwOntMassMgInterfaceFaultAlarmTrap NOTIFICATION-TYPE STATUS current DESCRIPTION "This notification indicates that the trap for a mass of ont mg interface fail." ::= { hwVoipOntTraps 17 } hwOntMassMgInterfaceRestoreAlarmTrap NOTIFICATION-TYPE STATUS current DESCRIPTION "This notification indicates that the trap for a mass of ont mg interface restore." ::= { hwVoipOntTraps 18 } END