-- ============================================================================ -- Copyright (C) 2012 by HUAWEI TECHNOLOGIES. All rights reserved. -- Description: This MIB module defines MIB objects that provide H248 management. -- Reference: -- Version: V1.28 -- ============================================================================ HUAWEI-VOIP-H248-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, private FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF TEXTUAL-CONVENTION FROM SNMPv2-TC IpAddress,TimeTicks,Counter32, Integer32, Unsigned32 FROM SNMPv2-SMI RowStatus,DisplayString FROM SNMPv2-TC huaweiUtility FROM HUAWEI-MIB; hwVoip MODULE-IDENTITY LAST-UPDATED "201302180000Z" ORGANIZATION "Huawei Technologies Co., Ltd." CONTACT-INFO "Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China Website: http://www.huawei.com Email: support@huawei.com " DESCRIPTION " This MIB module defines MIB objects that provide H248 management. " -- Revision history REVISION "201302180000Z" DESCRIPTION "V1.28, modify the value range of hwH248MgSoftParameter15, from 1-2 to 1-3" REVISION "201210110000Z" DESCRIPTION "V1.27, modify the value range of hwH248MedGwyRegisterKey, hwH248MedGwyOperKeyNew in hwH248MedGwyConfigTable from 1-32 to 0-32" REVISION "201207160000Z" DESCRIPTION "V1.26, modify the status of hwH248MgSoftParameter0 hwH248MgSoftParameter1 hwH248MgSoftParameter3 hwH248MgSoftParameter5 hwH248MgSoftParameter8 hwH248MgSoftParameter9 hwH248MgSoftParameter10 hwH248MgSoftParameter12 hwH248MgSoftParameter14 hwH248MgSoftParameter17 hwH248MgSoftParameter18 hwH248MgSoftParameter19 hwH248MgSoftParameter20 hwH248MgSoftParameter21 from current to deprecated" REVISION "201207110000Z" DESCRIPTION "V1.26, modify the value range of hwH248MedGwyCurHeartBeatTimer from 5-655 to 1-32 and the description" REVISION "201109290000Z" DESCRIPTION "V1.25, modify the value range of hwH248ProfileNegoNameCur, hwH248MedGwyCurHeartBeatTimer and hwH248MedGwyHeartBeatTimerCur" REVISION "201108160000Z" DESCRIPTION "V1.24, added hwH248MedGwyKeepActiveFlag, hwH248MedGwyKeepActivePeriod, hwH248MgSoftParameter37" REVISION "201011160000Z" DESCRIPTION "V1.23, modified hwH248MedGwyCfgHeartBeatTimer, revised the description errors" REVISION "201009200000Z" DESCRIPTION "V1.22, modified hwH248MedGwyCfgHeartBeatTimer" REVISION "201009140000Z" DESCRIPTION "V1.21, modified node description" REVISION "201006170000Z" DESCRIPTION "V1.20, DT MIB standard, modified and fixed spell error" REVISION "201006170000Z" DESCRIPTION "V1.19, corrected the description" REVISION "201005050000Z" DESCRIPTION "V1.18, revised the errors" REVISION "201004100000Z" DESCRIPTION "V1.17, corrected the enumerate name" REVISION "201003220000Z" DESCRIPTION "V1.16, corrected test errors" REVISION "201001300000Z" DESCRIPTION "V1.15, added trap notification" REVISION "200912180000Z" DESCRIPTION "V1.14, added hwH248MedGwySigIPAddrName, hwH248MedGwyMediaIPAddrName, hwH248MedGwySigIPAddrNameCur,hwH248MedGwyMediaIPAddrNameCur,hwH248MedGwySigIPAddress1Cur, and hwH248MedGwyMediaIPAddress1Cur to support DHCP" REVISION "200911060000Z" DESCRIPTION "V1.13, modified hwH248MgSoftParameter29's value range" REVISION "200910150000Z" DESCRIPTION "V1.12, added hwH248MgSoftParameter32, hwH248MgSoftParameter33 to set the minimal length of port auto register timer and MG heartbeat switch" ::= { huaweiUtility 36 } hwIASVoipAlarmOids OBJECT IDENTIFIER ::= { hwIASVoipTraps 1 } hwIASVoipAlarmTraps OBJECT IDENTIFIER ::= { hwIASVoipTraps 0 } hwIASVoipObjects OBJECT IDENTIFIER ::= { hwVoip 1 } hwIASVoipTraps OBJECT IDENTIFIER ::= { hwVoip 2 } hwIASH248TrapsVbOids OBJECT IDENTIFIER ::= { hwVoip 3 } hwIASH248Traps OBJECT IDENTIFIER ::= { hwVoip 4 } hwIASH248CommonTraps OBJECT IDENTIFIER ::= { hwIASH248Traps 1 } hwIASH248AlarmTraps OBJECT IDENTIFIER ::= { hwIASH248Traps 2 } --Start IASV500R002-SRV C003 modified hwH248MedGwyConfigTable and hwH248MedGwyCtrlTable libiao 2005-09-08 hwH248MedGwyConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF HwH248MedGwyConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table is used to manage H248 media gateway. The index of this table is hwH248MedGwyId. " ::= { hwIASVoipObjects 1 } hwH248MedGwyConfigEntry OBJECT-TYPE SYNTAX HwH248MedGwyConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table is used to manage H248 media gateway. The index of this entry is hwH248MedGwyId. " INDEX { hwH248MedGwyId } ::= { hwH248MedGwyConfigTable 1 } HwH248MedGwyConfigEntry::= SEQUENCE { hwH248MedGwyId Integer32, hwH248MedGwyDomainName OCTET STRING, hwH248MedGwyDesc OCTET STRING, hwH248MedGwySigIPAddress1 IpAddress, hwH248MedGwyIPAddress2 IpAddress, hwH248MedGwySigUDPPort Integer32, hwH248MedGwyProtocol INTEGER, hwH248MedGwyCodeType INTEGER, hwH248MedGwyTransMode INTEGER, hwH248MedGwyRegisterKey OCTET STRING, hwH248MedGwyOperKey OCTET STRING, hwH248MedGwyOperKeyNew OCTET STRING, hwH248MedGwyAdminStatus INTEGER, hwH248MedGwyOperStatus INTEGER, hwH248MedGwyRowStatus RowStatus, hwH248MedGwyLastChange TimeTicks, hwH248MedGwyProfile1 OCTET STRING, hwH248MedGwyProfile2 OCTET STRING, hwH248MedGwyProfile3 OCTET STRING, hwH248MedGwyProfileUsing OCTET STRING, hwH248MedGwyTopH248Version INTEGER, hwH248MedGwyCurH248Version INTEGER, hwH248MedGwyCurUsedDspNum Integer32, hwH248MedGwyAuthInitialKey OCTET STRING, hwH248MedGwyAuthMgId OCTET STRING, hwH248MedGwyAuthAlgorithm INTEGER, hwH248MedGwy2833Encrypt OCTET STRING, hwH248MedGwyCfgHeartBeatTimer Integer32, hwH248MedGwyCurHeartBeatTimer Integer32, hwH248MedGwyCallHoldTimer Integer32, hwH248MedGwyMediaIPAddress1 IpAddress, hwH248MedGwyMIDType INTEGER, hwH248MedGwyDeviceName OCTET STRING, hwH248MedGwyheartbeattimes Integer32, hwH248MedGwyheartbeatretranstimer Integer32, hwH248MedGwyCurMIDType INTEGER, hwH248MedGwyCurDeviceName OCTET STRING, hwH248MedGwyGracefulTimer Integer32, hwH248MedGwyBeginNegotiationH248Version Integer32, hwH248MedGwyProfileIndex Integer32, hwH248MedGwyProfileIndexUsing Integer32, hwH248ProfileParaNegotiationSupport INTEGER, hwH248MgProfileCfgName OCTET STRING, hwH248MgProfileNegoName OCTET STRING, hwH248MedGwyMediaIPAddress2 IpAddress, hwH248MedGwyOperReasonCode Integer32, hwH248MedGwySigIPAddrDhcpClientIndex Integer32, hwH248MedGwyMediaIPAddrDhcpClientIndex Integer32, hwH248MedGwyRestrans INTEGER, hwH248MedGwySigIPAddrName OCTET STRING, hwH248MedGwyMediaIPAddrName OCTET STRING, hwH248MedGwyKeepActiveFlag INTEGER, hwH248MedGwyKeepActivePeriod Integer32 } hwH248MedGwyId OBJECT-TYPE SYNTAX Integer32(0..16777215) MAX-ACCESS not-accessible STATUS current DESCRIPTION " Media Gateway ID. " ::= { hwH248MedGwyConfigEntry 1 } hwH248MedGwyDomainName OBJECT-TYPE SYNTAX OCTET STRING(SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION " Indicates the domain name of the MG, null means clear the value of this parameter. " ::= { hwH248MedGwyConfigEntry 2 } hwH248MedGwyDesc OBJECT-TYPE SYNTAX OCTET STRING(SIZE (0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION " Indicates the interface description. " ::= { hwH248MedGwyConfigEntry 3 } hwH248MedGwySigIPAddress1 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION " Indicates the signaling IP address of the MG. " ::= { hwH248MedGwyConfigEntry 4 } hwH248MedGwyIPAddress2 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION " The second IP address that the Media Gateway Controller will use to communicate with the Media Gateway. The system does not support setting it now. " ::= { hwH248MedGwyConfigEntry 5 } hwH248MedGwySigUDPPort OBJECT-TYPE SYNTAX Integer32(2900..2999|65535) MAX-ACCESS read-write STATUS current DESCRIPTION " Signalling UDP port that the Media Gateway Controller will use to communicate with the Media Gateway. 65535 means this parameter is not configurated. " ::= { hwH248MedGwyConfigEntry 6 } hwH248MedGwyProtocol OBJECT-TYPE SYNTAX INTEGER{h248(1)} MAX-ACCESS read-only STATUS current DESCRIPTION " Type of the control protocol in use. Options: 1. h248(1) -H.248 " ::= { hwH248MedGwyConfigEntry 7 } hwH248MedGwyCodeType OBJECT-TYPE SYNTAX INTEGER{ txt(1), -- text bin(2) -- binary } MAX-ACCESS read-write STATUS current DESCRIPTION " Indicates the coding type. Options: 1. txt(1) -text 2. bin(2) -binary " ::= { hwH248MedGwyConfigEntry 8 } hwH248MedGwyTransMode OBJECT-TYPE SYNTAX INTEGER{ noConfig(-1), tcp(1), -- tcp udp(2), -- udp alf-udp(3), -- udp with alf sctp(4) -- sctp } MAX-ACCESS read-write STATUS current DESCRIPTION " Indicates the transmission mode. Options: 1. noConfig(-1) -not configured 2. tcp(1) -tcp 3. udp(2) -udp 4. alf-udp(3) -udp with alf 5. sctp(4) -sctp " ::= { hwH248MedGwyConfigEntry 9 } hwH248MedGwyRegisterKey OBJECT-TYPE SYNTAX OCTET STRING(SIZE (0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION " Indicates the key that is registered with the MGC. The key cannot be modified, read, or written by the operator without authority, so the hwH248MedGwyRegisterKey and hwH248MedGwyOperKey must be also provided to query and modify the hwH248MedGwyRegisterKey. The conditions for querying and modifying the hwH248MedGwyRegisterKey are as follows: 1) The hwH248MedGwyRegisterKey can return the correct query result only when the hwH248MedGwyOperKey is correct. Otherwise, the query fails; 2) The hwH248MedGwyRegisterKey can be set successfully only when the hwH248MedGwyOperKey is correct. Otherwise, the setting fails. This parameters must be 8..32 characters long to set. 0 indicate invalid string. " ::= { hwH248MedGwyConfigEntry 10 } hwH248MedGwyOperKey OBJECT-TYPE SYNTAX OCTET STRING(SIZE (0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the key for operating the MG. The hwH248MedGwyOperKey cannot be read. The functions of this key are as follows: 1) The hwH248MedGwyRegisterKey and hwH248MedGwyOperKey must be provided for modifying the hwH248MedGwyRegisterKey. The hwH248MedGwyRegisterKey can return the correct query result only when the hwH248MedGwyOperKey is correct. Otherwise, the query fails. The hwH248MedGwyRegisterKey can be set successfully only when the hwH248MedGwyOperKey is correct. Otherwise, the setting fails. 2) The hwH248MedGwyOperKey must work with the hwH248MedGwyOperKeyNew for modifying the hwH248MedGwyOperKey itself. The hwH248MedGwyOperKeyNew and hwH248MedGwyOperKey must be provided at the same time. The value of the hwH248MedGwyOperKeyNew can replace the value of the hwH248MedGwyOperKey and the hwH248MedGwyOperKeyNew can become the new operation key only when the hwH248MedGwyOperKey is correct. Otherwise, the modification fails and the hwH248MedGwyOperKey operation key is retained. " ::= { hwH248MedGwyConfigEntry 11 } hwH248MedGwyOperKeyNew OBJECT-TYPE SYNTAX OCTET STRING(SIZE (0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION " Indicates the new operation key. The hwH248MedGwyOperKeyNew is a temporary variable, and cannot be read. If you query one hwH248MedGwyOperKeyNew, the system always returns a null value. This parameters must be 8..32 charactor long to set. 0 indicate invalid string. " DEFVAL { ''b } ::= { hwH248MedGwyConfigEntry 12 } hwH248MedGwyAdminStatus OBJECT-TYPE SYNTAX INTEGER{up(1), -- normal down(2), -- disconnect with MGC resetrestortserve(3), -- restore service reset(4), -- cold boot shutdownforce(5), -- force to shutdowm shutdowngraceful(6) -- graceful shutdown } MAX-ACCESS read-write STATUS current DESCRIPTION " Administrative status for this media gateway control group. The default reason code relates to the status is as follows: reset -- ColdBoot(901) shutdown force -- TerminationTakenOutOfService(905) shutdown graceful -- MGImpendingFailure(908) Options: 1. up(1) -normal, invalid in P300 product 2. down(2) -disconnect with MGC, invalid in P300 product 3. resetrestortserve(3) -restore service 4. reset(4) -cold reboot 5. shutdownforce(5) -force to shutdowm 6. shutdowngraceful(6) -graceful shutdown " ::= { hwH248MedGwyConfigEntry 13 } hwH248MedGwyOperStatus OBJECT-TYPE SYNTAX INTEGER{ up(1), -- normal local-closed(2), -- local closed fault(3), -- fault waiting-ack(4), -- wating for ack unknown(5), -- unknown not-start(6), -- not start remote-closed(7), -- remote closed graceful-closed(8) -- graceful closed } MAX-ACCESS read-only STATUS current DESCRIPTION " Current operational status of the signaling link. Options: 1. up(1) -normal 2. local-closed(2) -local closed 3. fault(3) -fault 4. waiting-ack(4) -wating for ack 5. unknown(5) -unknown 6. not-start(6) -not start 7. remote-closed(7) -remote closed 8. graceful-closed(8) -graceful closed " ::= { hwH248MedGwyConfigEntry 14 } hwH248MedGwyRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION " This is used to create new rows in this table, modify existing rows, and delete existing rows. " ::= { hwH248MedGwyConfigEntry 15 } hwH248MedGwyLastChange OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION " The value of sysUpTime at the time the associated link entered its current operational status. If the current status was entered prior to the last re-initialization of the local network management subsystem, then this object contains a zero value. " ::= { hwH248MedGwyConfigEntry 16 } hwH248MedGwyProfile1 OBJECT-TYPE SYNTAX OCTET STRING(SIZE (1..67)) MAX-ACCESS read-write STATUS obsolete DESCRIPTION " Indicates the name of the first H.248 profile of the MG (including / + version; version is a number). " ::= { hwH248MedGwyConfigEntry 17 } hwH248MedGwyProfile2 OBJECT-TYPE SYNTAX OCTET STRING(SIZE (1..67)) MAX-ACCESS read-write STATUS obsolete DESCRIPTION " Indicates the name of the second H.248 profile of the MG (including / + version; version is a number). " ::= { hwH248MedGwyConfigEntry 18 } hwH248MedGwyProfile3 OBJECT-TYPE SYNTAX OCTET STRING(SIZE (1..67)) MAX-ACCESS read-write STATUS obsolete DESCRIPTION " Indicates the name of the third H.248 profile of the MG (including / + version; version is a number). " ::= { hwH248MedGwyConfigEntry 19 } hwH248MedGwyProfileUsing OBJECT-TYPE SYNTAX OCTET STRING(SIZE (1..67)) MAX-ACCESS read-only STATUS obsolete DESCRIPTION " Indicates the name of the profile that is currently in use. " ::= { hwH248MedGwyConfigEntry 20 } hwH248MedGwyTopH248Version OBJECT-TYPE SYNTAX INTEGER{v1(1),v2(2),v3(3)} MAX-ACCESS read-write STATUS obsolete DESCRIPTION " Indicates the latest H.248 version that is supported by the MG. In the P300, this parameter is read-only. Options: 1. v1(1) -version 1 2. v2(2) -version 2 3. v3(3) -version 3 " ::= { hwH248MedGwyConfigEntry 21 } hwH248MedGwyCurH248Version OBJECT-TYPE SYNTAX INTEGER{v1(1),v2(2),v3(3)} MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the current H.248 version of the MG. Options: 1. v1(1) -version 1 2. v2(2) -version 2 3. v3(3) -version 3 " ::= { hwH248MedGwyConfigEntry 22 } hwH248MedGwyCurUsedDspNum OBJECT-TYPE SYNTAX Integer32(0..1000) MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the count of currently occupied DSPs of the interface. " ::= { hwH248MedGwyConfigEntry 23 } hwH248MedGwyAuthInitialKey OBJECT-TYPE SYNTAX OCTET STRING(SIZE (1..16)) MAX-ACCESS read-write STATUS current DESCRIPTION " Indicates the authentication initial key. " ::= { hwH248MedGwyConfigEntry 24 } hwH248MedGwyAuthMgId OBJECT-TYPE SYNTAX OCTET STRING(SIZE (1..16)) MAX-ACCESS read-write STATUS current DESCRIPTION " Indicates the authentication MG ID. " ::= { hwH248MedGwyConfigEntry 25 } hwH248MedGwyAuthAlgorithm OBJECT-TYPE SYNTAX INTEGER{md5(1)} MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the authentication encryption algorithm. Options: 1. md5(1) -MD5 " ::= { hwH248MedGwyConfigEntry 26 } hwH248MedGwy2833Encrypt OBJECT-TYPE SYNTAX OCTET STRING(SIZE (0..16)) MAX-ACCESS read-write STATUS current DESCRIPTION " Indicates the 2833 encryption key. " ::= { hwH248MedGwyConfigEntry 27 } hwH248MedGwyCfgHeartBeatTimer OBJECT-TYPE SYNTAX Integer32(1..655) MAX-ACCESS read-write STATUS current DESCRIPTION " Indicates the configured timer of the initial heartbeat. Unit: second " ::= { hwH248MedGwyConfigEntry 28 } hwH248MedGwyCurHeartBeatTimer OBJECT-TYPE SYNTAX Integer32(1..655|0) MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the current timer of the initial heartbeat. The valid value range is 1..655, if the value is 0, the heartbeat is not started. Unit: second " ::= { hwH248MedGwyConfigEntry 29 } hwH248MedGwyCallHoldTimer OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the timer of holding the call after the MG interface is interrupted. Unit: second " ::= { hwH248MedGwyConfigEntry 30 } hwH248MedGwyMediaIPAddress1 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION " Indicates the first media IP address of the MG. " ::= { hwH248MedGwyConfigEntry 31 } hwH248MedGwyMIDType OBJECT-TYPE SYNTAX INTEGER{ip4Address(1), -- IP address domainName(2), -- domain name deviceName(3) -- device name } MAX-ACCESS read-write STATUS current DESCRIPTION " Indicates the MID type of the MG message. Options: 1. ip4Address(1) -IP address 2. domainName(2) -domain name 3. deviceName(3) -device name " ::= { hwH248MedGwyConfigEntry 32 } hwH248MedGwyDeviceName OBJECT-TYPE SYNTAX OCTET STRING(SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION " Indicates the name of the MG device. " ::= { hwH248MedGwyConfigEntry 33 } hwH248MedGwyheartbeattimes OBJECT-TYPE SYNTAX Integer32(0..20) MAX-ACCESS read-write STATUS current DESCRIPTION " Indicates the count of heartbeat re-transmission. " ::= { hwH248MedGwyConfigEntry 34 } hwH248MedGwyheartbeatretranstimer OBJECT-TYPE SYNTAX Integer32(0..655) MAX-ACCESS read-write STATUS current DESCRIPTION " Indicates the interval of heartbeat re-transmission. " ::= { hwH248MedGwyConfigEntry 35 } hwH248MedGwyCurMIDType OBJECT-TYPE SYNTAX INTEGER{ip4Address(1), -- IP address domainName(2), -- domain name deviceName(3)} -- device name MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the current MID type of the MG message. Options: 1. ip4Address(1) -IP address 2. domainName(2) -domain name 3. deviceName(3) -device name " ::= { hwH248MedGwyConfigEntry 36 } hwH248MedGwyCurDeviceName OBJECT-TYPE SYNTAX OCTET STRING(SIZE (0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the current name of the MG device. " ::= { hwH248MedGwyConfigEntry 37 } hwH248MedGwyGracefulTimer OBJECT-TYPE SYNTAX Integer32(0..86400) MAX-ACCESS read-write STATUS current DESCRIPTION " Indicates the graceful timer of the MG interface. This parameter is effective only when it is delivered with the shutdown graceful command. 0 means no time limit. Unit: second. " ::= { hwH248MedGwyConfigEntry 38 } hwH248MedGwyBeginNegotiationH248Version OBJECT-TYPE SYNTAX Integer32(0..3) MAX-ACCESS read-write STATUS current DESCRIPTION " Indicates the H.248 version at the beginning of the negotiation. 0:depend on profile 1:v1 2:v2 3:v3 " ::= { hwH248MedGwyConfigEntry 39 } hwH248MedGwyProfileIndex OBJECT-TYPE SYNTAX Integer32(0..254) MAX-ACCESS read-write STATUS current DESCRIPTION " Indicates the profile index configured for the MG. This parameter is effective only after the MG is reset. " ::= { hwH248MedGwyConfigEntry 40 } hwH248MedGwyProfileIndexUsing OBJECT-TYPE SYNTAX Integer32(0..254) MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the profile index that is currently used by the MG. " ::= { hwH248MedGwyConfigEntry 41 } hwH248ProfileParaNegotiationSupport OBJECT-TYPE SYNTAX INTEGER{disable(1), enable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION " Indicates whether the MG supports the negotiated profile parameters. Options: 1. disable(1) -not support 2. enable(2) -support " ::= { hwH248MedGwyConfigEntry 42 } hwH248MgProfileCfgName OBJECT-TYPE SYNTAX OCTET STRING(SIZE (1..67)) MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the configured name of the H.248 profile of the MG. " ::= { hwH248MedGwyConfigEntry 43 } hwH248MgProfileNegoName OBJECT-TYPE SYNTAX OCTET STRING(SIZE (0..67)) MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the negotiated name of the H.248 profile of the MG. " ::= { hwH248MedGwyConfigEntry 44 } hwH248MedGwyMediaIPAddress2 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION " Indicates the second media IP of MG. " ::= { hwH248MedGwyConfigEntry 45 } hwH248MedGwyOperReasonCode OBJECT-TYPE SYNTAX Integer32(1..6|-1) MAX-ACCESS read-write STATUS current DESCRIPTION " Indicates the reason code of reset or shutdown interface.It's valid when set hwH248MedGwyAdminStatus to 4,5 or 6 at the same time. The leaf is optional,if not set,use the default reason code relates to the status, and the leaf does not support get. And the leaf is valid begin with VSPV200R002 version. 1:ServiceRestored(900) --reason code of reset MG interface 2:ColdBoot(901) --reason code of reset MG interface 3:WarmBoot(902) --reason code of reset MG interface 4:TerminationTakenOutOfService(905) --reason code of shutdown MG interface 5:MGImpendingFailure(908) --reason code of shutdown MG interface 6:CapabilitiesChange(917) --reason code of reset MG interface. If the value of the ACCESS clause is 'write-only', then the value of the MAX-ACCESS clause MUST be 'read-write', and the DESCRIPTION clause SHALL note that reading this object will result in implementation-specific results." ::= { hwH248MedGwyConfigEntry 46 } hwH248MedGwySigIPAddrDhcpClientIndex OBJECT-TYPE SYNTAX Integer32(1..4093|-1) MAX-ACCESS read-write STATUS current DESCRIPTION " Dhcp Signal vlan id. The valid value range is 1..4093,if the value is -1, the static signal ip will be used. " ::= { hwH248MedGwyConfigEntry 47 } hwH248MedGwyMediaIPAddrDhcpClientIndex OBJECT-TYPE SYNTAX Integer32(1..4093|-1) MAX-ACCESS read-write STATUS current DESCRIPTION " Dhcp Media vlan id. The valid value range is 1..4093,if the value is -1, the static media ip will be used. " ::= { hwH248MedGwyConfigEntry 48 } hwH248MedGwyRestrans OBJECT-TYPE SYNTAX INTEGER{enable(1), disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION " Indicates whether the MG supports retrans. Options: 1. enable(1) -support 2. disable(2) -not support " ::= { hwH248MedGwyConfigEntry 49 } hwH248MedGwySigIPAddrName OBJECT-TYPE SYNTAX OCTET STRING(SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION " Dynamic signal IP name. " ::= { hwH248MedGwyConfigEntry 50 } hwH248MedGwyMediaIPAddrName OBJECT-TYPE SYNTAX OCTET STRING(SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION " Dynamic media IP name. " ::= { hwH248MedGwyConfigEntry 51 } hwH248MedGwyKeepActiveFlag OBJECT-TYPE SYNTAX INTEGER{enable(1), disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION " The switch for transfer connect regular renovate. Options: 1. enable(1) -enable 2. disable(2) -disable Default: disable(2) " DEFVAL { {disable (2)} } ::= { hwH248MedGwyConfigEntry 52 } hwH248MedGwyKeepActivePeriod OBJECT-TYPE SYNTAX Integer32(1..3600) MAX-ACCESS read-write STATUS current DESCRIPTION " Indicates the configured period of transfer connect regular renovate. Unit: second Default:30 " DEFVAL { 30 } ::= { hwH248MedGwyConfigEntry 53 } hwH248MedGwyCtrlTable OBJECT-TYPE SYNTAX SEQUENCE OF HwH248MedGwyCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table is used to config addresses of Media Gateway Controllers. The indexes of this table are hwH248MedGwyCtrlGatewayId, hwH248MedGwyCtrlIdx. " ::= { hwIASVoipObjects 2 } hwH248MedGwyCtrlEntry OBJECT-TYPE SYNTAX HwH248MedGwyCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table is used to config addresses of Media Gateway Controllers. The indexes of this entry are hwH248MedGwyCtrlGatewayId, hwH248MedGwyCtrlIdx. " INDEX { hwH248MedGwyCtrlGatewayId, hwH248MedGwyCtrlIdx } ::= { hwH248MedGwyCtrlTable 1 } HwH248MedGwyCtrlEntry ::= SEQUENCE { hwH248MedGwyCtrlGatewayId Integer32, hwH248MedGwyCtrlIdx Integer32, hwH248MedGwyCtrlIPAddress IpAddress, hwH248MedGwyCtrlDnsName OCTET STRING, hwH248MedGwyCtrlDnsIp IpAddress, hwH248MedGwyCtrlPort Integer32, hwH248MedGwyCtrlAdminStatus INTEGER, hwH248MedGwyCtrlOperStatus INTEGER, hwH248MedGwyCtrlRowStatus RowStatus, hwH248MedGwyCtrlLastChange TimeTicks, hwH248MedGwyCtrlIPAddress2 IpAddress } hwH248MedGwyCtrlGatewayId OBJECT-TYPE SYNTAX Integer32(0..16777215) MAX-ACCESS not-accessible STATUS current DESCRIPTION " Indicates the MG ID. " ::= { hwH248MedGwyCtrlEntry 1 } hwH248MedGwyCtrlIdx OBJECT-TYPE SYNTAX Integer32(0..2) MAX-ACCESS not-accessible STATUS current DESCRIPTION " Indicates the MGC index. " ::= { hwH248MedGwyCtrlEntry 2 } hwH248MedGwyCtrlIPAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION " The IP address of the Media Gateway Controller. The value 255.255.255.255 is returned if the entry is invalid. " ::= { hwH248MedGwyCtrlEntry 3 } hwH248MedGwyCtrlDnsName OBJECT-TYPE SYNTAX OCTET STRING(SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION " Indicates the DNS name of the MGC. " ::= { hwH248MedGwyCtrlEntry 4 } hwH248MedGwyCtrlDnsIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the IP address that is obtained through the MGC domain name. DEFVAL { false } " ::= { hwH248MedGwyCtrlEntry 5 } hwH248MedGwyCtrlPort OBJECT-TYPE SYNTAX Integer32(1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION " UDP port of the Media Gateway Controller. The value 65535 is returned if the entry is invalid. " ::= { hwH248MedGwyCtrlEntry 6 } hwH248MedGwyCtrlAdminStatus OBJECT-TYPE SYNTAX INTEGER{active(1)} MAX-ACCESS read-write STATUS current DESCRIPTION " Indicates to set the MGC as the active MGC. Options: 1. active(1) -active state " ::= { hwH248MedGwyCtrlEntry 7 } hwH248MedGwyCtrlOperStatus OBJECT-TYPE SYNTAX INTEGER{up(1), -- up down(2), -- down standby(3) -- standby } MAX-ACCESS read-only STATUS current DESCRIPTION " Status of the Media Gateway Controller (and/or) its transportLink. Options: 1. up(1) -normal 2. down(2) -fault 3. standby(3) -standby " ::= { hwH248MedGwyCtrlEntry 8 } hwH248MedGwyCtrlRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION " Indicates the row status. " ::= { hwH248MedGwyCtrlEntry 9 } hwH248MedGwyCtrlLastChange OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION " The value of sysUpTime at the time the associated link entered its current operational status. If the current status was entered prior to the last re-initialization of the local network management subsystem, then this object contains a zero value. " ::= { hwH248MedGwyCtrlEntry 10 } hwH248MedGwyCtrlIPAddress2 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION " The IP address of the Media Gateway Controller for SCTP dual homing. The value 255.255.255.255 is returned if the entry is invalid. " ::= { hwH248MedGwyCtrlEntry 11 } -- End IASV500R002-SRV C003 modified hwH248MedGwyConfigTable and hwH248MedGwyCtrlTable libiao 2005-09-08 hwMgPhyTerminationCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF HwMgPhyTerminationCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table is used to config the physical termination of the MG. The index of this table is hwMgPhyTerminationIndex. " ::= { hwIASVoipObjects 3 } hwMgPhyTerminationCfgEntry OBJECT-TYPE SYNTAX HwMgPhyTerminationCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table is used to config the physical termination of the MG. The index of this entry is hwMgPhyTerminationIndex. " INDEX { hwMgPhyTerminationIndex } ::= { hwMgPhyTerminationCfgTable 1 } HwMgPhyTerminationCfgEntry ::= SEQUENCE { hwMgPhyTerminationIndex Integer32, hwMgPhyTerminationMgId Integer32, hwMgPhyTerminationID OCTET STRING, hwMgPhyTerminationTelNo OCTET STRING, hwMgPhyTerminationSrvState INTEGER, hwMgPhyTerminationOperate INTEGER, hwMgPhyTerminationRowStatus RowStatus, hwMgPhyTerminationContexID Integer32, hwMgPhyTerminationLayerFlag INTEGER, hwMgPhyTerminationLastChange TimeTicks, hwMgPhyTerminationPriorityFlag INTEGER, hwMgPhyTerminationSrvAlarmState INTEGER, hwMgPhyTerminationSrvAlarmType INTEGER } hwMgPhyTerminationIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION " Indicates the shelf/slot/port. " ::= { hwMgPhyTerminationCfgEntry 1 } hwMgPhyTerminationMgId OBJECT-TYPE SYNTAX Integer32(0..16777215) MAX-ACCESS read-create STATUS current DESCRIPTION " Indicates the MG ID. " ::= { hwMgPhyTerminationCfgEntry 2 } hwMgPhyTerminationID OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..64)) MAX-ACCESS read-create STATUS current DESCRIPTION " Indicates the termination ID. " ::= { hwMgPhyTerminationCfgEntry 3 } hwMgPhyTerminationTelNo OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..16)) MAX-ACCESS read-create STATUS current DESCRIPTION " Indicates the telephone number. " ::= { hwMgPhyTerminationCfgEntry 4 } hwMgPhyTerminationSrvState OBJECT-TYPE SYNTAX INTEGER{serviceStopLocal(1), -- stop local service serviceStopRemote(2), -- stop remote service serviceStopAuto(3), -- stop service automatically serviceStart(4), -- start service serviceStopGraceful(5) -- Stop service graceful } MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the service status. Options: 1. serviceStopLocal(1) -stop local service 2. serviceStopRemote(2) -stop remote service 3. serviceStopAuto(3) -stop service automatically 4. serviceStart(4) -start service 5. serviceStopGraceful(5) -stop service graceful " ::= { hwMgPhyTerminationCfgEntry 5 } hwMgPhyTerminationOperate OBJECT-TYPE SYNTAX INTEGER{stop(1), -- stop service start(2) -- start service } MAX-ACCESS read-write STATUS current DESCRIPTION " Indicates the service operation. Options: 1. stop(1) -stop service 2. start(2) -start service " ::= { hwMgPhyTerminationCfgEntry 6 } hwMgPhyTerminationRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION " Indicates the row status. " ::= { hwMgPhyTerminationCfgEntry 7 } hwMgPhyTerminationContexID OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the context ID of the termination. " ::= { hwMgPhyTerminationCfgEntry 8 } hwMgPhyTerminationLayerFlag OBJECT-TYPE SYNTAX INTEGER{nolayer(1), -- not to layer layer(2) -- to layer } MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the layering flag. Currently, only the value nolayer(1) is supported. Options: 1. nolayer(1) -not to layer 2. layer(2) -to layer " ::= { hwMgPhyTerminationCfgEntry 9 } hwMgPhyTerminationLastChange OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the service status changing time. " ::= { hwMgPhyTerminationCfgEntry 10 } hwMgPhyTerminationPriorityFlag OBJECT-TYPE SYNTAX INTEGER{cat1(1),cat2(2),cat3(3)} MAX-ACCESS read-write STATUS current DESCRIPTION " Indicates the priority of the termination. Options: 1. cat1(1) -cat1 2. cat2(2) -cat2 3. cat3(3) -cat3 " DEFVAL { cat3 } ::= { hwMgPhyTerminationCfgEntry 11 } hwMgPhyTerminationSrvAlarmState OBJECT-TYPE SYNTAX INTEGER{no(1),yes(2)} MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the alarm state of service port. Options: 1. no(1) -has no alarm 2. yes(2) -has alarm " ::= { hwMgPhyTerminationCfgEntry 12 } hwMgPhyTerminationSrvAlarmType OBJECT-TYPE SYNTAX INTEGER{portFailure(1), -- port failure vagInterfaceInterrupt(2), -- VAG Interrupt noDsp(3), -- no DSP resource alarm portBlock(4), -- port block portLocked(5), -- port locked circuitryFailure(6) -- circuitry failure } MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the alarm type of service port. Options: 1. portFailure(1) -port failure 2. vagInterfaceInterrupt(2) -VAG Interrupt 3. noDsp(3) -no DSP resource alarm 4. portBlock(4) -port block 5. portLocked(5) -port locked 6. circuitryFailure(6) -circuitry failure " ::= { hwMgPhyTerminationCfgEntry 13 } ------------------------------------------------------- hwMgPhyTerminationOperTable OBJECT-TYPE SYNTAX SEQUENCE OF HwMgPhyTerminationOperEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table is used to query the port status of the physical termination of the MG. The index of this table is hwMgPhyTermIndex. " ::= { hwIASVoipObjects 4 } hwMgPhyTerminationOperEntry OBJECT-TYPE SYNTAX HwMgPhyTerminationOperEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table is used to query the port status of the physical termination of the MG. The index of this entry is hwMgPhyTermIndex. " INDEX { hwMgPhyTermIndex } ::= { hwMgPhyTerminationOperTable 1 } HwMgPhyTerminationOperEntry ::= SEQUENCE { hwMgPhyTermIndex Integer32, hwMgPhyTerminationPortState INTEGER, hwMgPhyTerminationSrvType INTEGER, hwMgPhyTerminationAdminStatus INTEGER, hwMgPhyTerminationStateChange TimeTicks, hwMgPhyTerminationConfigState INTEGER, hwMgPhyTerminationOperOperate INTEGER, hwMgPhyTerminationMaxCOBTime Integer32, hwMgPhyTerminationOnExpire INTEGER, hwMgPhyTerminationUpTimeSinceLastRTS TimeTicks, hwMgPhyTerminationEndServiceLastTime TimeTicks, hwMgPhyTerminationEndServiceMode Integer32 } hwMgPhyTermIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION " Indicates the shelf/slot/port. " ::= { hwMgPhyTerminationOperEntry 1 } hwMgPhyTerminationPortState OBJECT-TYPE SYNTAX INTEGER{idle(1), -- idle fault(2), -- fault test(3), -- testing lock(4), -- locked busy(5), -- busy localLoop(6), -- local loopback remoteLoop(7), -- remote loopback powerdeny(8), -- powerdeny ring(9) -- ringing } MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the physical status of the port. Options: 1. idle(1) -idle 2. fault(2) -faulty 3. test(3) -test 4. lock(4) -locked 5. busy(5) -busy 6. localLoop(6) -local loopback 7. remoteLoop(7) -remote loopback 8. powerdeny(8) -low power consumption 9. ring(9) -ring " ::= { hwMgPhyTerminationOperEntry 2 } hwMgPhyTerminationSrvType OBJECT-TYPE SYNTAX INTEGER{normal(1), -- instant service innerSpc(2), -- inner SPC v5spc(3), -- V5 SPC v5pre(4), -- V5 pre-connection privateSpc(5), -- V5 private SPC ipSpc(6)} -- IP SPC MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the service type of the port. Options: 1. normal(1)-instant service 2. innerSpc(2) -inner SPC 3. v5spc(3) -V5 SPC 4. v5pre(4) -V5 pre-connection 5. privateSpc(5) -private line service 6. ipSpc(6) -IP SPC " ::= { hwMgPhyTerminationOperEntry 3 } hwMgPhyTerminationAdminStatus OBJECT-TYPE SYNTAX INTEGER{reset(1), -- reset localloop(2), -- local loopback remoteloop(3), -- remote loopback cancelloop(4), -- cancel loopback startagc(5) -- start automatic gain control } MAX-ACCESS read-write STATUS current DESCRIPTION " Indicates the maintenance operation of the port. Options: 1. reset(1) -reset 2. localloop(2) -local loopback 3. remoteloop(3) -remote loopback 4. cancelloop(4) -cancel loopback 5. startagc(5) -start automatic gain control " ::= { hwMgPhyTerminationOperEntry 4 } hwMgPhyTerminationStateChange OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the physical status changing time of the port. " ::= { hwMgPhyTerminationOperEntry 5 } hwMgPhyTerminationConfigState OBJECT-TYPE SYNTAX INTEGER{configedMgUser(1), -- configured MG subscriber configedV5User(2), -- configured V5 subscriber notConfiged(3), -- not configured spcmcfged(4), -- configured SPCM subscriber mglicensed(5), -- configured and licensed MG subscriber v5licensed(6) -- configured and licensed V5 subscriber } MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the configured subscriber type. Options: 1. configedMgUser(1) -configured MG subscriber 2. configedV5User(2) -configured V5 subscriber 3. notConfiged(3) -not configured 4. spcmcfged(4) -configured SPCM subscriber 5. mglicensed(5) -configured and licensed MG subscriber 6. v5licensed(6) -configured and licensed V5 subscriber " ::= { hwMgPhyTerminationOperEntry 6 } hwMgPhyTerminationOperOperate OBJECT-TYPE SYNTAX INTEGER{stop(1), -- stop service start(2) -- start service } MAX-ACCESS read-write STATUS current DESCRIPTION " Indicates the service operation. Options: 1. stop(1) -stop service 2. start(2) -start service " ::= { hwMgPhyTerminationOperEntry 7 } hwMgPhyTerminationMaxCOBTime OBJECT-TYPE SYNTAX Integer32(1..1440) MAX-ACCESS read-write STATUS current DESCRIPTION " The longest time of out of service gracefully. Unit:minute " DEFVAL { 240 } ::= { hwMgPhyTerminationOperEntry 8 } hwMgPhyTerminationOnExpire OBJECT-TYPE SYNTAX INTEGER{forced(1), -- force to stop service cancel(2) -- cancel operation } MAX-ACCESS read-write STATUS current DESCRIPTION " The disposal method when the port get out of service gracefully. Options: 1. forced(1) -force to stop service 2. cancel(2) -cancel operation " DEFVAL { forced } ::= { hwMgPhyTerminationOperEntry 9 } hwMgPhyTerminationUpTimeSinceLastRTS OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION " The time since PSTN port get in service latest " ::= { hwMgPhyTerminationOperEntry 10 } hwMgPhyTerminationEndServiceLastTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION " Remanent time before the timer overtime " ::= { hwMgPhyTerminationOperEntry 11 } hwMgPhyTerminationEndServiceMode OBJECT-TYPE SYNTAX Integer32(1..2) MAX-ACCESS read-write STATUS current DESCRIPTION " Endservice mode. 1-Immediate, 2-Graceful. " ::= { hwMgPhyTerminationOperEntry 12 } hwMgEphemeralTerminationTable OBJECT-TYPE SYNTAX SEQUENCE OF HwMgEphemeralTerminationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table is used to config the virtual termination configuration of the MG. The indexes of this table are hwMgEphemeralTerminationMgId, hwMgEphemeralTerminationID. " ::= { hwIASVoipObjects 5 } hwMgEphemeralTerminationEntry OBJECT-TYPE SYNTAX HwMgEphemeralTerminationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table is used to config the virtual termination configuration of the MG. The indexes of this entry are hwMgEphemeralTerminationMgId, hwMgEphemeralTerminationID. " INDEX { hwMgEphemeralTerminationMgId, hwMgEphemeralTerminationID } ::= { hwMgEphemeralTerminationTable 1 } HwMgEphemeralTerminationEntry ::= SEQUENCE { hwMgEphemeralTerminationMgId Integer32, hwMgEphemeralTerminationID Integer32, hwMgEphemeralTerminationPacketTime Integer32, hwMgEphemeralTerminationVAD INTEGER, hwMgEphemeralTerminationEC INTEGER, hwMgEphemeralTerminationJitBuffer Integer32, hwMgEphemeralTerminationTransGain Integer32, hwMgEphemeralTerminationRecvGain Integer32, hwMgEphemeralTerminationCodeC INTEGER, hwMgEphemeralTerminationLocalIPAddr IpAddress, hwMgEphemeralTerminationLocalPort Integer32, hwMgEphemeralTerminationPeerIPAddr IpAddress, hwMgEphemeralTerminationPeerPort Integer32, hwMgEphemeralTerminationPlace Integer32, hwMgEphemeralTerminationContexID Integer32 } hwMgEphemeralTerminationMgId OBJECT-TYPE SYNTAX Integer32(0..16777215) MAX-ACCESS not-accessible STATUS current DESCRIPTION " Indicates the MG ID. " ::= { hwMgEphemeralTerminationEntry 1 } hwMgEphemeralTerminationID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION " Indicates the virtual termination ID. " ::= { hwMgEphemeralTerminationEntry 2 } hwMgEphemeralTerminationPacketTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the packetizing time. Unit: millisecond. " ::= { hwMgEphemeralTerminationEntry 3 } hwMgEphemeralTerminationVAD OBJECT-TYPE SYNTAX INTEGER{true(1), -- enable VAD false(2) -- disable VAD } MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates voice activity detection. Options: 1. true(1) -enable VAD 2. false(2) -disable VAD " ::= { hwMgEphemeralTerminationEntry 4 } hwMgEphemeralTerminationEC OBJECT-TYPE SYNTAX INTEGER{true(1), -- enable EC false(2) -- disable EC } MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates echo cancel. Options: 1. true(1) -enable EC 2. false(2) -disable EC " ::= { hwMgEphemeralTerminationEntry 5 } hwMgEphemeralTerminationJitBuffer OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the value of JitBuffer. Unit: second. " ::= { hwMgEphemeralTerminationEntry 6 } hwMgEphemeralTerminationTransGain OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the transmit gain. Unit: dB. " ::= { hwMgEphemeralTerminationEntry 7 } hwMgEphemeralTerminationRecvGain OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the receive gain. Unit: dB. " ::= { hwMgEphemeralTerminationEntry 8 } hwMgEphemeralTerminationCodeC OBJECT-TYPE SYNTAX INTEGER{acG711A-law(1),acG711u-law(2),acG726-16(3),acG726-24(4),acG726-32(5),acG726-40(6),acG727-16(7),acG727-24-16(8),acG727-24(9),acG727-32-16(10),acG727-32-24(11),acG727-32(12),acG727-40-16(13),acG727-40-24(14),acG727-40-32(15),acG723Low(16),acG723High(17),acG729(18),acReserved18(19),acGSM610(20),acGSM610MS(21),acReserved21(22),acTransparent(23),acG728(24),acHDLCcoder(25),acNetCoder-4-8(26),acNetCoder-5-6(27),acNetCoder-6-4(28),acNetCoder-7-2(29),acNetCoder-8(30),acNetCoder-8-8(31),acNetCoder-9-6(32),acEVRC(33),acEVRC-TFO(34),acQCELP-8(35),acQCELP-8-TFO(36),acQCELP-13(37),acQCELP-13-TFO(38),acReserved38(39),acReserved39(40),acNoCoder(41),acModemAnswer(42),acModemCall(43),acReserved43(44),acReserved44(45),acG711A-law-5-5(46),acG711u-law-5-5(47),acG726-32-5-5(48),acReserved48(49),acReserved49(50),acAMR-4-75(51),acAMR-5-15(52),acAMR-5-9(53),acAMR-6-7(54),acAMR-7-4(55),acAMR-7-95(56),acAMR-10-2(57),acAMR-12-2(58),t38Fax(59),g722(60)} MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the enumerated definition of the VoiceCode. Note that several items in the enumerated definition are not consecutive. In the definition above, acG723Low(16) and acG723High(17) need not be distinguished and can be directly presented as G.723. Options: 1. acG711A-law(1) -G711A 2. acG711u-law(2) -G711U 3. acG726-16(3) -G726-16 4. acG726-24(4) -G726-24 5. acG726-32(5) -G726-32 6. acG726-40(6) -G726-40 7. acG727-16(7) -G727-16 8. acG727-24-16(8) -G727-24-16 9. acG727-24(9) -G727-24 10. acG727-32-16(10) -G727-32-16 11. acG727-32-24(11) -G727-32-24 12. acG727-32(12) -G727-32 13. acG727-40-16(13) -G727-40-16 14. acG727-40-24(14) -G727-40-24 15. acG727-40-32(15) -G727-40-32 16. acG723Low(16) -G723 low speed 17. acG723High(17) -G723 high speed 18. acG729(18) -G729 19. acReserved18(19) -system reserved 20. acGSM610(20) -GSM610 21. acGSM610MS(21) -GSM610MS 22. acReserved21(22) -system reserved 23. acTransparent(23) -transparent 24. acG728(24) -G728 25. acHDLCcoder(25) -HDLCcoder 26. acNetCoder-4-8(26) -NetCoder-4-8 27. acNetCoder-5-6(27) -NetCoder-5-6 28. acNetCoder-6-4(28) -NetCoder-6-4 29. acNetCoder-7-2(29) -NetCoder-7-2 30. acNetCoder-8(30) -NetCoder-8 31. acNetCoder-8-8(31) -NetCoder-8-8 32. acNetCoder-9-6(32) -NetCoder-9-6 33. acEVRC(33) -EVRC 34. acEVRC-TFO(34) -EVRC-TFO 35. acQCELP-8(35) -QCELP-8 36. acQCELP-8-TFO(36) -QCELP-8-TFO 37. acQCELP-13(37) -QCELP-13 38. acQCELP-13-TFO(38) -QCELP-13-TFO 39. acReserved38(39) -system reserved 40. acReserved39(40) -system reserved 41. acNoCoder(41) -No coder 42. acModemAnswer(42) -ModemAnswer 43. acModemCall(43) -ModemCall 44. acReserved43(44) -system reserved 45. acReserved44(45) -system reserved 46. acG711A-law-5-5(46) -G711A-law-5-5 47. acG711u-law-5-5(47) -G711u-law-5-5 48. acG726-32-5-5(48) -G726-32-5-5 48. acReserved48(49) -system reserved 50. acReserved49(50) -system reserved 51. acAMR-4-75(51) -AMR-4-75 52. acAMR-5-15(52) -AMR-5-15 53. acAMR-5-9(53) -AMR-5-9 54. acAMR-6-7(54) -AMR-6-7 55. acAMR-7-4(55) -AMR-7-4 56. acAMR-7-95(56) -AMR-7-95 57. acAMR-10-2(57) -AMR-10-2 58. acAMR-12-2(58) -AMR-12-2 59. t38Fax(59) -t38Fax 60. g722(60) -G722 " ::= { hwMgEphemeralTerminationEntry 9 } hwMgEphemeralTerminationLocalIPAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the local IP address. " ::= { hwMgEphemeralTerminationEntry 10 } hwMgEphemeralTerminationLocalPort OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the local RTP port. " ::= { hwMgEphemeralTerminationEntry 11 } hwMgEphemeralTerminationPeerIPAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the peer IP address. " ::= { hwMgEphemeralTerminationEntry 12 } hwMgEphemeralTerminationPeerPort OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the peer RTP port. " ::= { hwMgEphemeralTerminationEntry 13 } hwMgEphemeralTerminationPlace OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the DSP channel (shelf/slot/subboard/channel index) of the virtual terminal of the MG. Bits 31-26 (six bits): shelf index Bits 25-20 (six bits): slot index Bits 19-16 (four bits): subboard index Bits 15-0 (16 bits): channel index " ::= { hwMgEphemeralTerminationEntry 14 } hwMgEphemeralTerminationContexID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the context ID. " ::= { hwMgEphemeralTerminationEntry 15 } hwMgContexTable OBJECT-TYPE SYNTAX SEQUENCE OF HwMgContexEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table is used to config the context of the MG. The indexes of this table are hwMgContexMgId, hwMgContexlID. " ::= { hwIASVoipObjects 6 } hwMgContexEntry OBJECT-TYPE SYNTAX HwMgContexEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table is used to config the context of the MG. The indexes of this entry are hwMgContexMgId, hwMgContexlID. " INDEX { hwMgContexMgId, hwMgContexlID } ::= { hwMgContexTable 1 } HwMgContexEntry ::= SEQUENCE { hwMgContexMgId Integer32, hwMgContexlID Integer32, hwMgTerminationID1 Integer32, hwMgTerminationID2 Integer32 } hwMgContexMgId OBJECT-TYPE SYNTAX Integer32(0..16777215) MAX-ACCESS not-accessible STATUS current DESCRIPTION " Indicates the MG ID. " ::= { hwMgContexEntry 1 } hwMgContexlID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION " Indicates the context ID. " ::= { hwMgContexEntry 2 } hwMgTerminationID1 OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the physical termination ID. " ::= { hwMgContexEntry 3 } hwMgTerminationID2 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the virtual termination ID. " ::= { hwMgContexEntry 4 } hwH248ParaTable OBJECT-TYPE SYNTAX SEQUENCE OF HwH248ParaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table is used to config the H.248 parameter. The index of this table is hwH248ParaMgId. " ::= { hwIASVoipObjects 17 } hwH248ParaEntry OBJECT-TYPE SYNTAX HwH248ParaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table is used to config the H.248 parameter. The index of this entry is hwH248ParaMgId. " INDEX { hwH248ParaMgId } ::= { hwH248ParaTable 1 } HwH248ParaEntry ::= SEQUENCE { hwH248ParaMgId Integer32, hwH248ParaTransReliable INTEGER, hwH248ParaLongTimer Integer32, hwH248ParaMaxRetransTimer Integer32, hwH248ParaMinRetransTimer Integer32, hwH248ParaMgProvRespTimer Integer32, hwH248ParaMaxRetrans Integer32, hwH248ParaSecurity INTEGER, hwH248ParaSdpEncodeType INTEGER, hwH248ParaResponseAckCtrl INTEGER, hwH248ParaRetransMode INTEGER, hwH248ParaRetransTimer Integer32, hwH248ParaTMax Integer32, hwH248ParaRetransfailoption INTEGER, hwH248ParaFormatoption INTEGER, hwH248ParaMTU Integer32, hwH248ParaMessagesegmentation INTEGER, hwH248ParaMgcProvRespTimer Integer32, hwH248ParaMgOriginatedPendingLimit Integer32, hwH248ParaMgcOriginatedPendingLimit Integer32 } hwH248ParaMgId OBJECT-TYPE SYNTAX Integer32(0..16777215) MAX-ACCESS not-accessible STATUS current DESCRIPTION " Indicates the MG ID. " ::= { hwH248ParaEntry 1 } hwH248ParaTransReliable OBJECT-TYPE SYNTAX INTEGER{yes(1), -- enable retransmission no(2) -- disable retransmission } MAX-ACCESS read-write STATUS current DESCRIPTION " Indicates the transaction reliability. The transaction reliability queue and the re-transmission timer are initialized when the protocol is initialized. Therefore, the transaction reliability can be set dynamically based on the current network conditions. The transaction reliability of different ports can be set differently. It only supports query in VSPV3R1 and after VSPV3R1. Options: 1. yes(1) -enable retransmission 2. no(2) -disable retransmission " ::= { hwH248ParaEntry 2 } hwH248ParaLongTimer OBJECT-TYPE SYNTAX Integer32(10000..40000) MAX-ACCESS read-write STATUS current DESCRIPTION " Indicates the length of the long timer. This parameter is a concept in the transaction reliability of the H.248 protocol stack. The protocol recommends a value of 30000 ms. The value can be set dynamically according to the current network conditions. The length of the long timer of different ports can be set differently. " DEFVAL { 30000 } ::= { hwH248ParaEntry 3 } hwH248ParaMaxRetransTimer OBJECT-TYPE SYNTAX Integer32(500..16000) MAX-ACCESS read-write STATUS current DESCRIPTION " Indicates the maximum length of the re-transmission timer. This parameter is a concept in the transaction reliability of the H.248 protocol stack. The protocol recommends a value of 4000 ms. When the H.248 protocol stack re-transmits messages, it calculates the length of the re-transmission timer by using the maximum and the minimum length of the re-transmission timer. The value can be set dynamically according to the current network conditions. The maximum length of the re-transmission timer of different ports can be set differently. " DEFVAL { 4000 } ::= { hwH248ParaEntry 4 } hwH248ParaMinRetransTimer OBJECT-TYPE SYNTAX Integer32(100..4000) MAX-ACCESS read-write STATUS current DESCRIPTION " Indicates the minimum length of the re-transmission timer. This parameter is a concept in the transaction reliability of the H.248 protocol stack. The protocol recommends a value of 1000 ms. When the H.248 protocol stack re-transmits messages, it calculates the length of the re-transmission timer by using the maximum and the minimum length of the re-transmission timer. The value can be set dynamically according to the current network conditions. The minimum length of the re-transmission timer of different ports can be set differently. " DEFVAL { 500 } ::= { hwH248ParaEntry 5 } hwH248ParaMgProvRespTimer OBJECT-TYPE SYNTAX Integer32(6000..10000) MAX-ACCESS read-write STATUS current DESCRIPTION " Indicates the length of the timer for provisional responses. By default, it is 8000 ms. Unit: millisecond. " DEFVAL { 8000 } ::= { hwH248ParaEntry 6 } hwH248ParaMaxRetrans OBJECT-TYPE SYNTAX Integer32(1..9) MAX-ACCESS read-write STATUS current DESCRIPTION " Indicates the maximum count of re-transmission. This parameter is a concept in the transaction reliability of the H.248 protocol stack. The value can be set dynamically based on different network conditions. By default, it is 7. " DEFVAL { 7 } ::= { hwH248ParaEntry 7 } hwH248ParaSecurity OBJECT-TYPE SYNTAX INTEGER{noah(1),md5(2),sha1(3)} MAX-ACCESS read-write STATUS current DESCRIPTION " Indicates the authorization type. Options: 1. noah(1) -no authorization 2. md5(2) -MD5 3. sha1(3) -SHA1 " ::= { hwH248ParaEntry 8 } hwH248ParaSdpEncodeType OBJECT-TYPE SYNTAX INTEGER{text(1),hex(2)} MAX-ACCESS read-write STATUS current DESCRIPTION " Indicates the SDP encapsulation type. Options: 1. text(1) -text 2. hex(2) -hex " ::= { hwH248ParaEntry 9 } hwH248ParaResponseAckCtrl OBJECT-TYPE SYNTAX INTEGER{false(1), -- disable three-way handshake true(2) -- enable three-way handshake } MAX-ACCESS read-write STATUS current DESCRIPTION " Indicates the switch of the three-way handshake signal. Options: 1. false(1) -disable three-way handshake 2. true(2) -enable three-way handshake " ::= { hwH248ParaEntry 10 } hwH248ParaRetransMode OBJECT-TYPE SYNTAX INTEGER{auto(1),fixed(2)} MAX-ACCESS read-write STATUS current DESCRIPTION " Indicates the retransmission mode. Options: 1. auto(1) -auto 2. fixed(2) -fixed " ::= { hwH248ParaEntry 11 } hwH248ParaRetransTimer OBJECT-TYPE SYNTAX Integer32(100..4000) MAX-ACCESS read-write STATUS current DESCRIPTION " Indicates the fixed re-transmission interval (this parameter is effective when the re-transmission mode is the fixed mode; by default, it is 2000). " ::= { hwH248ParaEntry 12 } hwH248ParaTMax OBJECT-TYPE SYNTAX Integer32(10000..30000) MAX-ACCESS read-write STATUS current DESCRIPTION " Indicates the re-transmission length of the H.248 protocol stack (by default, it is 25000). " ::= { hwH248ParaEntry 13 } hwH248ParaRetransfailoption OBJECT-TYPE SYNTAX INTEGER{times(1), -- times t-max(2) -- max time } MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the retransmission failure option of the H.248 protocol stack. Options: 1. times(1) -times 2. t-max(2) -max time " ::= { hwH248ParaEntry 14 } hwH248ParaFormatoption OBJECT-TYPE SYNTAX INTEGER{short(1),long(2)} MAX-ACCESS read-write STATUS current DESCRIPTION " Indicates the message format of the H.248 protocol stack. Options: 1. short(1) -short format 2. long(2) -long format Default: short(1) " ::= { hwH248ParaEntry 15 } hwH248ParaMTU OBJECT-TYPE SYNTAX Integer32(1..10000) MAX-ACCESS read-write STATUS current DESCRIPTION " Indicates the value of the maximum transmission unit of the H.248 protocol stack. Default: 1500 " ::= { hwH248ParaEntry 16 } hwH248ParaMessagesegmentation OBJECT-TYPE SYNTAX INTEGER{support(1),notsupport(2)} MAX-ACCESS read-write STATUS current DESCRIPTION " Indicates the message format of the H.248 protocol stack. Options: 1. support(1) -support format message 2. notsupport(2) -not support format message Default: support(1) " ::= { hwH248ParaEntry 17 } hwH248ParaMgcProvRespTimer OBJECT-TYPE SYNTAX Integer32(6000..10000) MAX-ACCESS read-write STATUS current DESCRIPTION " Indicates the length of MGC provisional response timer. Unit: millisecond " DEFVAL { 8000 } ::= { hwH248ParaEntry 18 } hwH248ParaMgOriginatedPendingLimit OBJECT-TYPE SYNTAX Integer32(1..10) MAX-ACCESS read-write STATUS current DESCRIPTION " Indicates the max times of MG sends provisional response. " DEFVAL { 5 } ::= { hwH248ParaEntry 19 } hwH248ParaMgcOriginatedPendingLimit OBJECT-TYPE SYNTAX Integer32(1..10) MAX-ACCESS read-write STATUS current DESCRIPTION " Indicates the max times of MGC sends provisional response. " DEFVAL { 5 } ::= { hwH248ParaEntry 20 } -- -- hwDigitmapInner OBJECT-TYPE -- SYNTAX OCTET STRING(SIZE(0..255)) -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- " -- Indicates the common inner telephone digitmap. -- " -- ::= { hwDigitmapTable 1 } -- -- hwDigitmapEmergency OBJECT-TYPE -- SYNTAX OCTET STRING(SIZE(0..255)) -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- " -- Indicates the emergency channel digitmap. -- " -- ::= { hwDigitmapTable 2 } -- -- hwDigitmapDualdial OBJECT-TYPE -- SYNTAX OCTET STRING(SIZE(0..15)) -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- " -- Indicates the automatic re-dial digitmap. -- " -- ::= { hwDigitmapTable 3 } -- -- hwDigitmapOverLoadUrgent OBJECT-TYPE -- SYNTAX OCTET STRING(SIZE(0..255)) -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- " -- Indicates the overload emergency call digitmap. -- " -- ::= { hwDigitmapTable 4 } hwH248DigitmapTable OBJECT-TYPE SYNTAX SEQUENCE OF HwH248DigitmapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table is used to config the inner digitmap configuration. The index of this table is hwH248DigitmapMgId. " ::= { hwIASVoipObjects 23 } hwH248DigitmapEntry OBJECT-TYPE SYNTAX HwH248DigitmapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table is used to config the inner digitmap configuration. The index of this entry is hwH248DigitmapMgId. " INDEX { hwH248DigitmapMgId } ::= { hwH248DigitmapTable 1 } HwH248DigitmapEntry ::= SEQUENCE { hwH248DigitmapMgId Integer32, hwH248DigitmapInner OCTET STRING, hwH248DigitmapEmergency OCTET STRING, hwH248DigitmapDualdial OCTET STRING, hwH248DigitmapOverLoadUrgent OCTET STRING } hwH248DigitmapMgId OBJECT-TYPE SYNTAX Integer32(0..16777215) MAX-ACCESS not-accessible STATUS current DESCRIPTION " Indicates the MG interface ID. " ::= { hwH248DigitmapEntry 1 } hwH248DigitmapInner OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..127)) MAX-ACCESS read-write STATUS current DESCRIPTION " Indicates the inner call digitmap. " ::= { hwH248DigitmapEntry 2 } hwH248DigitmapEmergency OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..127)) MAX-ACCESS read-write STATUS current DESCRIPTION " Indicates the emergency channel digitmap. " ::= { hwH248DigitmapEntry 3 } hwH248DigitmapDualdial OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..14)) MAX-ACCESS read-write STATUS current DESCRIPTION " Indicates the automatic re-dial digitmap. " ::= { hwH248DigitmapEntry 4 } hwH248DigitmapOverLoadUrgent OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..127)) MAX-ACCESS read-write STATUS current DESCRIPTION " Indicates the emergency call digitmap in case of overload or insufficient bandwidth. " ::= { hwH248DigitmapEntry 5 } hwStandaloneParaTable OBJECT-TYPE SYNTAX SEQUENCE OF HwStandaloneParaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table is used to config the stand-alone parameter. The index of this table is hwStandaloneParaMgId. " ::= { hwIASVoipObjects 24 } hwStandaloneParaEntry OBJECT-TYPE SYNTAX HwStandaloneParaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table is used to config the stand-alone parameter. The index of this entry is hwStandaloneParaMgId. " INDEX { hwStandaloneParaMgId } ::= { hwStandaloneParaTable 1 } HwStandaloneParaEntry ::= SEQUENCE { hwStandaloneParaMgId Integer32, hwStandAloneDialTone Integer32, hwStandAloneRing Integer32, hwStandAloneBusyTone Integer32 } hwStandaloneParaMgId OBJECT-TYPE SYNTAX Integer32(0..16777215) MAX-ACCESS not-accessible STATUS current DESCRIPTION " Indicates the MG interface ID. " ::= { hwStandaloneParaEntry 1 } hwStandAloneDialTone OBJECT-TYPE SYNTAX Integer32(1..120) MAX-ACCESS read-write STATUS current DESCRIPTION " Indicates the duration of the dial tone. Unit: second " ::= { hwStandaloneParaEntry 2 } hwStandAloneRing OBJECT-TYPE SYNTAX Integer32(1..120) MAX-ACCESS read-write STATUS current DESCRIPTION " Indicates the duration of the ring. Unit: second " ::= { hwStandaloneParaEntry 3 } hwStandAloneBusyTone OBJECT-TYPE SYNTAX Integer32(1..120) MAX-ACCESS read-write STATUS current DESCRIPTION " Indicates the duration of the busy tone. Unit: second " ::= { hwStandaloneParaEntry 4 } hwH248MgSoftParameterTable OBJECT-TYPE SYNTAX SEQUENCE OF HwH248MgSoftParameterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table is to indicates the MG software parameter. The index of this table is hwH248MgInterfaceIndex. " ::= { hwIASVoipObjects 28 } hwH248MgSoftParameterEntry OBJECT-TYPE SYNTAX HwH248MgSoftParameterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table is to indicates the MG software parameter. The index of this entry is hwH248MgInterfaceIndex. " INDEX { hwH248MgInterfaceIndex } ::= { hwH248MgSoftParameterTable 1 } HwH248MgSoftParameterEntry ::= SEQUENCE { hwH248MgInterfaceIndex Integer32, hwH248MgSoftParameter0 INTEGER, hwH248MgSoftParameter1 INTEGER, hwH248MgSoftParameter2 INTEGER, hwH248MgSoftParameter3 INTEGER, hwH248MgSoftParameter4 INTEGER, hwH248MgSoftParameter5 INTEGER, hwH248MgSoftParameter6 INTEGER, hwH248MgSoftParameter7 INTEGER, hwH248MgSoftParameter8 Integer32, hwH248MgSoftParameter9 INTEGER, hwH248MgSoftParameter10 INTEGER, -- BEGIN: modified by wuguowang 20050725 FOR BT VAG */ hwH248MgSoftParameter11 INTEGER, hwH248MgSoftParameter12 INTEGER, hwH248MgSoftParameter13 INTEGER, hwH248MgSoftParameter14 INTEGER, -- END: modified by wuguowang 20050725 FOR BT VAG */ hwH248MgSoftParameter15 INTEGER, hwH248MgSoftParameter16 Integer32, hwH248MgSoftParameter17 INTEGER, hwH248MgSoftParameter18 INTEGER, hwH248MgSoftParameter19 INTEGER, hwH248MgSoftParameter20 INTEGER, hwH248MgSoftParameter21 INTEGER, hwH248MgSoftParameter22 INTEGER, hwH248MgSoftParameter23 Integer32, hwH248MgSoftParameter24 Integer32, hwH248MgSoftParameter25 Integer32, hwH248MgSoftParameter26 INTEGER, hwH248MgSoftParameter27 INTEGER, hwH248MgSoftParameter28 Integer32, hwH248MgSoftParameter29 Integer32, hwH248MgSoftParameter30 Integer32, hwH248MgSoftParameter31 INTEGER, hwH248MgSoftParameter32 Integer32, hwH248MgSoftParameter33 INTEGER, hwH248MgSoftParameter34 INTEGER, hwH248MgSoftParameter35 INTEGER, hwH248MgSoftParameter36 Integer32, hwH248MgSoftParameter37 INTEGER } hwH248MgInterfaceIndex OBJECT-TYPE SYNTAX Integer32(0..16777215) MAX-ACCESS not-accessible STATUS current DESCRIPTION " Indicates the MG interface index. " ::= { hwH248MgSoftParameterEntry 1 } hwH248MgSoftParameter0 OBJECT-TYPE SYNTAX INTEGER{yes(1), no(2), nolayer(3), type1layer(4), type2layer(5) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION " Parameter name index 0. It indicates whether the terminal ID of the MG interface is layered. In the P300, the values of 1 and 2 are unavailable. Options: 1. yes(1) -layered 2. no(2) -not layered 3. nolayer(3) -not layered 4. type1layer(4) -type 1 layer (the shelf and the slot are at the same layer) 5. type2layer(5) -type 2 layer (the shelf and the slot are not at the same layer) " --DEFVAL { yes(1) } ::= { hwH248MgSoftParameterEntry 2 } hwH248MgSoftParameter1 OBJECT-TYPE SYNTAX INTEGER{holding-to-resume(1),no(2),holding-all-along(3)} MAX-ACCESS read-write STATUS deprecated DESCRIPTION " Parameter name index 1. It indicates whether the ongoing calls are maintained after MG is disconnected from MGC. (It is unavailable in the VSPV1R2.) Options: 1. holding-to-resume(1) -hold to resume 2. no(2) -not maintained 3. holding-all-along(3) -hold all along " --DEFVAL { no(2) } ::= { hwH248MgSoftParameterEntry 3 } hwH248MgSoftParameter2 OBJECT-TYPE SYNTAX INTEGER{no(1), -- not support multiple homing multiHome(2), -- support multiple homing, but the active MGC does not switch over automatically autoSwitchOver(3) -- support multiple homing, and the active MGC switch over automatically } MAX-ACCESS read-write STATUS current DESCRIPTION " Parameter name index 2. It indicates whether the MG interface supports multiple homing. It is unavailable in the VSPV1R2. Options: 1. no(1) -not support multiple homing 2. multiHome(2) -support multiple homing, but the active MGC does not switch over automatically 3. autoSwitchOver(3) -support multiple homing, and the active MGC switch over automatically Default: no(1) " --DEFVAL { no(1) } ::= { hwH248MgSoftParameterEntry 4 } hwH248MgSoftParameter3 OBJECT-TYPE SYNTAX INTEGER{heartbeat(1), -- heartbeat messageRetransmission(2) -- retransmission } MAX-ACCESS read-write STATUS deprecated DESCRIPTION " Parameter name index 3. It indicates the MG interface interruption detecting mode. It is unavailable in the P300. Options: 1. heartbeat(1) -heartbeat 2. messageRetransmission(2) -retransmission " --DEFVAL { Heartbeat(1) } ::= { hwH248MgSoftParameterEntry 5 } hwH248MgSoftParameter4 OBJECT-TYPE SYNTAX INTEGER{yes(1), -- use wildcard in registration no(2) -- do not use wildcard in registration } MAX-ACCESS read-write STATUS current DESCRIPTION " Parameter name index 4. It indicates whether the wildcard is used in registration. Options: 1. yes(1) -use wildcard in registration 2. no(2) -do not use wildcard in registration Default: yes(1) " --DEFVAL { yes(1) } ::= { hwH248MgSoftParameterEntry 6 } hwH248MgSoftParameter5 OBJECT-TYPE SYNTAX INTEGER{yes(1), -- the port fault and auto-block is reported to the MGC no(2) -- the port fault and auto-block is not reported to the MGC } MAX-ACCESS read-write STATUS deprecated DESCRIPTION " Parameter name index 5. It indicates whether the port fault and auto-block is reported to the MGC. Options: 1. yes(1) -the port fault and auto-block is reported to the MGC 2. no(2) -the port fault and auto-block is not reported to the MGC " --DEFVAL { yes(1) } ::= { hwH248MgSoftParameterEntry 7 } hwH248MgSoftParameter6 OBJECT-TYPE SYNTAX INTEGER{yes(1), -- support authentication no(2) -- not support authentication } MAX-ACCESS read-write STATUS current DESCRIPTION " Parameter name index 6. It indicates whether authentication is supported. Options: 1. yes(1) -support authentication 2. no(2) -not support authentication Default: no(2) " --DEFVAL { no(2) } ::= { hwH248MgSoftParameterEntry 8 } hwH248MgSoftParameter7 OBJECT-TYPE SYNTAX INTEGER{yes(1), -- support the security header no(2) -- not support the security header } MAX-ACCESS read-write STATUS current DESCRIPTION " Parameter name index 7. It indicates whether the security header is supported. Options: 1. yes(1) -support the security header 2. no(2) -not support the security header Default: no(2) " --DEFVAL { no(2) } ::= { hwH248MgSoftParameterEntry 9 } hwH248MgSoftParameter8 OBJECT-TYPE SYNTAX Integer32(0..1000) MAX-ACCESS read-write STATUS deprecated DESCRIPTION " Parameter name index 8. It indicates the maximum count of DSPs supported by the VAG. It is unavailable in the P300. " ::= { hwH248MgSoftParameterEntry 10 } hwH248MgSoftParameter9 OBJECT-TYPE SYNTAX INTEGER{yes(1), -- support overload control no(2) -- not support overload control } MAX-ACCESS read-write STATUS deprecated DESCRIPTION " Parameter name index 9. It indicates whether overload control is supported. It is unavailable in the P300. Options: 1. yes(1) -support overload control 2. no(2) -not support overload control " --DEFVAL { no(2) } ::= { hwH248MgSoftParameterEntry 11 } hwH248MgSoftParameter10 OBJECT-TYPE SYNTAX INTEGER{yes(1),no(2)} MAX-ACCESS read-write STATUS deprecated DESCRIPTION " Parameter name index 10. It indicates whether the SDP contains the o=,s=,t= row. It is unavailable in the VSPV1R2. Options: 1. yes(1) -SDP contain the o=,s=,t= row 2. no(2) -SDP not contain the o=,s=,t= row " --DEFVAL { no(2) } ::= { hwH248MgSoftParameterEntry 12 } -- BEGIN: modified by wuguowang 20050725 FOR BT VAG */ hwH248MgSoftParameter11 OBJECT-TYPE SYNTAX INTEGER{none(1), -- not support stand alone inner(2), -- support inner call emergency(3), -- support emergence call both(4) -- support inner call and emergence call } MAX-ACCESS read-write STATUS current DESCRIPTION " Parameter name index 11. It indicates the stand-alone flag. Options: 1. none(1) -not support stand alone 2. inner(2) -support inner call 3. emergency(3) -support emergence call 4. both(4) -support inner call and emergence call Default: none(1) " --DEFVAL { none(1) } ::= { hwH248MgSoftParameterEntry 13 } hwH248MgSoftParameter12 OBJECT-TYPE SYNTAX INTEGER{no(1),yes(2)} MAX-ACCESS read-write STATUS deprecated DESCRIPTION " Parameter name index 12. It indicates the stand-alone interruption flag. It is unavailable in the VSPV1R2. Options: 1. no(1) -no 2. yes(2) -yes " --DEFVAL { no(1) } ::= { hwH248MgSoftParameterEntry 14 } hwH248MgSoftParameter13 OBJECT-TYPE SYNTAX INTEGER{min(1),max(2),auto(3),autoadapt(4)} MAX-ACCESS read-write STATUS current DESCRIPTION " Parameter name index 13. It indicates the DMM match mode. Options: 1. min(1) -shortest 2. max(2) -longest 3. auto(3) -protocol define 4. autoadapt(4) -auto adapter Default: min(1) " --DEFVAL { min(1) } ::= { hwH248MgSoftParameterEntry 15 } hwH248MgSoftParameter14 OBJECT-TYPE SYNTAX INTEGER{min(1),max(5000)} MAX-ACCESS read-write STATUS deprecated DESCRIPTION " Parameter name index 14. It indicates the value of the maximum transmission unit. Options: 1. min(1) -min 2. max(5000) -max " --DEFVAL { (1500) } ::= { hwH248MgSoftParameterEntry 16 } -- END: modified by wuguowang 20050725 FOR BT VAG */ hwH248MgSoftParameter15 OBJECT-TYPE SYNTAX INTEGER{no(1),yes(2),always-no(3)} MAX-ACCESS read-write STATUS current DESCRIPTION " Parameter name index 15. It indicates the RTP source port filtering switch. Options: 1. no(1) -not filter without remote media. 2. yes(2) -filter without remote media. 3. always-no(3) -always not filter. Default: no(1) " --DEFVAL { no(1) } ::= { hwH248MgSoftParameterEntry 17 } hwH248MgSoftParameter16 OBJECT-TYPE SYNTAX Integer32(1..400) MAX-ACCESS read-write STATUS current DESCRIPTION " Parameter name index 16. It indicates the length of the RTP source port filtering timer. This parameter is valid only when the RTP filtering is enabled. Range: 1-400(VSP is 1-30S) Default: 5 Unit: second " --DEFVAL { (5) } ::= { hwH248MgSoftParameterEntry 18 } hwH248MgSoftParameter17 OBJECT-TYPE SYNTAX INTEGER{yes(1),no(2)} MAX-ACCESS read-write STATUS deprecated DESCRIPTION " Parameter name index 17. It indicates the context protection switch. It is unavailable in the VSPV1R2. Options: 1. yes(1) -the system releases the resource automatically 2. no(2) -the system does not release the resource automatically " --DEFVAL { no(2) } ::= { hwH248MgSoftParameterEntry 19 } hwH248MgSoftParameter18 OBJECT-TYPE SYNTAX INTEGER{yes(1),no(2)} MAX-ACCESS read-write STATUS deprecated DESCRIPTION " Parameter name index 18. It indicates the point-to-point fault report flag. Options: 1. yes(1) -report 2. no(2) -not report " --DEFVAL { yes(1) } ::= { hwH248MgSoftParameterEntry 20 } hwH248MgSoftParameter19 OBJECT-TYPE SYNTAX INTEGER{yes(1),no(2)} MAX-ACCESS read-write STATUS deprecated DESCRIPTION " Parameter name index 19. It indicates the point-to-multipoint fault report flag. Options: 1. yes(1) -report 2. no(2) -not report " --DEFVAL { no(2) } ::= { hwH248MgSoftParameterEntry 21 } hwH248MgSoftParameter20 OBJECT-TYPE SYNTAX INTEGER{highest(1),lowest(2),no(3)} MAX-ACCESS read-write STATUS deprecated DESCRIPTION " Parameter name index 20. It indicates the protocol version negotiation strategy. It is unavailable in the VSPV1R2. Options: 1. highest(1) -negotiate from the latest version 2. lowest(2) -negotiate from the earliest version 3. no(3) -not to negotiate the version " --DEFVAL { Negotiate from highest version(1) } ::= { hwH248MgSoftParameterEntry 22 } hwH248MgSoftParameter21 OBJECT-TYPE SYNTAX INTEGER{yes(1),no(2)} MAX-ACCESS read-write STATUS deprecated DESCRIPTION " Parameter name index 21. It is reserved in the system. Options: 1. yes(1) -yes 2. no(2) -no " ::= { hwH248MgSoftParameterEntry 23 } hwH248MgSoftParameter22 OBJECT-TYPE SYNTAX INTEGER{bT(1),eET(2),announcement(3)} MAX-ACCESS read-write STATUS current DESCRIPTION " Parameter name index 22. It indicates the type of the prompt tone that is played after MG is disconnected from MGC. Options: 1. bT(1) -busy tone 2. eET(2) -equipment engaged tone 3. announcement(3) -announcement Default: bT(1) " --DEFVAL { BT(1) } ::= { hwH248MgSoftParameterEntry 24 } hwH248MgSoftParameter23 OBJECT-TYPE SYNTAX Integer32(0..120) MAX-ACCESS read-write STATUS current DESCRIPTION " Parameter name index 23.It indicates the length of synchronize-delay timer of port config state. Default: 35 Unit: second " --DEFVAL { (35) } ::= { hwH248MgSoftParameterEntry 25 } hwH248MgSoftParameter24 OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION " Parameter name index 24. It indicates the number of rtp terminal. The maximum value is limited by product specification. " --DEFVAL { 1000 } ::= { hwH248MgSoftParameterEntry 26 } hwH248MgSoftParameter25 OBJECT-TYPE SYNTAX Integer32(30000..300000) MAX-ACCESS read-write STATUS current DESCRIPTION " Parameter name index 25. It indicates max random value of the avalanche prevention system of the interface. Default: 60000 Unit: millisecond " --DEFVAL { 60000 } ::= { hwH248MgSoftParameterEntry 27 } hwH248MgSoftParameter26 OBJECT-TYPE SYNTAX INTEGER{busyTone(1),congestionTone(2),muteTone(3),userDefineTone1(4),userDefineTone2(5)} MAX-ACCESS read-write STATUS current DESCRIPTION " Parameter name index 26. It indicates the local block tone type. Options: 1. busyTone(1) -busy tone 2. congestionTone(2) -congestion tone 3. muteTone(3) -mute tone 4. userDefineTone1(4) -user defined tone1 5. userDefineTone2(5) -user defined tone2 Default: busyTone(1) " --DEFVAL { busyTone(1) } ::= { hwH248MgSoftParameterEntry 28 } hwH248MgSoftParameter27 OBJECT-TYPE SYNTAX INTEGER{busyTone(1),congestionTone(2),muteTone(3),userDefineTone1(4),userDefineTone2(5)} MAX-ACCESS read-write STATUS current DESCRIPTION " Parameter name index 27. It indicates the remote block tone type. Options: 1. busyTone(1) -busy tone 2. congestionTone(2) -congestion tone 3. muteTone(3) -mute tone 4. userDefineTone1(4) -user defined tone1 5. userDefineTone2(5) -user defined tone2 Default: busyTone(1) " --DEFVAL { busyTone(1) } ::= { hwH248MgSoftParameterEntry 29 } hwH248MgSoftParameter28 OBJECT-TYPE SYNTAX Integer32(1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION " Parameter name index 28. It indicates the length of howler tone. Default: 60 Unit: second " --DEFVAL { 60 } ::= { hwH248MgSoftParameterEntry 30 } hwH248MgSoftParameter29 OBJECT-TYPE SYNTAX Integer32(1..60000) MAX-ACCESS read-write STATUS current DESCRIPTION " Parameter name index 29. It indicates the length of message waiting tone. Default: 3 Unit: second " --DEFVAL { 3 } ::= { hwH248MgSoftParameterEntry 31 } hwH248MgSoftParameter30 OBJECT-TYPE SYNTAX Integer32(1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION " Parameter name index 30. It indicates the length of long connect alarm. Default: 60 Unit: minute " --DEFVAL { 60 } ::= { hwH248MgSoftParameterEntry 32 } hwH248MgSoftParameter31 OBJECT-TYPE SYNTAX INTEGER{enable(1),disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION " Parameter name index 31. It indicates whether MG send long connect alarm. Options: 1. enable(1) -enable send long connect alarm 2. disable(2) -disable send long connect alarm Default: disable(2) " --DEFVAL { disable(2) } ::= { hwH248MgSoftParameterEntry 33 } hwH248MgSoftParameter32 OBJECT-TYPE SYNTAX Integer32(0..60000) MAX-ACCESS read-write STATUS current DESCRIPTION " Parameter name index 32. The minimal length of port auto register timer. Default: 1800 Unit: second " --DEFVAL { 1800 } ::= { hwH248MgSoftParameterEntry 34 } hwH248MgSoftParameter33 OBJECT-TYPE SYNTAX INTEGER{shutdown(1),enable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION " Parameter name index 33. It indicates whether MG shutdown heartbeat. Options: 1. shutdown(1) -shutdown heartbeat 2. enable(2) -enable heartbeat Default: enable(2) " --DEFVAL { 2 } ::= { hwH248MgSoftParameterEntry 35 } hwH248MgSoftParameter34 OBJECT-TYPE SYNTAX INTEGER{yes(1),no(2)} MAX-ACCESS read-write STATUS current DESCRIPTION " Parameter name index 34. It indicates whether the gateway actively sets up or cancels the link for the BRA user when the softswitch issues the in-service or out-of-service message. Options: 1. yes(1) -yes 2. no(2) -no Default: yes(1) " --DEFVAL { 1 } ::= { hwH248MgSoftParameterEntry 36 } hwH248MgSoftParameter35 OBJECT-TYPE SYNTAX INTEGER{both(1),singlechannel(2),wildcard(3)} MAX-ACCESS read-write STATUS current DESCRIPTION " Parameter name index 35. It indicates the mode for ISDN port is in service and out service. Options: 1. both(1) -supports in-service and out-of-service in single channel mode and wildcard mode 2. singlechannel(2) -supports in-service and out-of-service in single channel mode 3. wildcard(3) -supports in-service and out-of-service in wildcard mode Default: singlechannel(2) " --DEFVAL { 2 } ::= { hwH248MgSoftParameterEntry 37 } hwH248MgSoftParameter36 OBJECT-TYPE SYNTAX Integer32(1..1800) MAX-ACCESS read-write STATUS current DESCRIPTION " Parameter name index 36. Indicates the baseline interval of sending the registration message during the switchover between multi-homing MGCs. Default: 40 Unit: second " --DEFVAL { 40 } ::= { hwH248MgSoftParameterEntry 38 } hwH248MgSoftParameter37 OBJECT-TYPE SYNTAX INTEGER{enable(1),disable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION " Parameter name index 37. The switch for the pulse signal switch to the DTMF signal. Options: 1. enable(1) -enable 2. disable(2) -disable Default: disable(2) " --DEFVAL { 2 } ::= { hwH248MgSoftParameterEntry 39 } ---------------------------------------------------------------------------- hwH248DmmParaTable OBJECT-TYPE SYNTAX SEQUENCE OF HwH248DmmParaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table is used to config the digitmap. The index of this table is hwH248DmmParaMgId. " ::= { hwIASVoipObjects 29 } hwH248DmmParaEntry OBJECT-TYPE SYNTAX HwH248DmmParaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table is used to config the digitmap. The index of this entry is hwH248DmmParaMgId. " INDEX { hwH248DmmParaMgId } ::= { hwH248DmmParaTable 1 } HwH248DmmParaEntry ::= SEQUENCE { hwH248DmmParaMgId Integer32, hwH248DmmParaStartTimer Integer32, hwH248DmmParaShortTimer Integer32, hwH248DmmParaLongTimer Integer32, hwH248DmmParaDurationTimer Integer32 } hwH248DmmParaMgId OBJECT-TYPE SYNTAX Integer32(0..16777215) MAX-ACCESS not-accessible STATUS current DESCRIPTION " Indicates the MG ID. " ::= { hwH248DmmParaEntry 1 } hwH248DmmParaStartTimer OBJECT-TYPE SYNTAX Integer32(0..99) MAX-ACCESS read-write STATUS current DESCRIPTION " Indicates the length of the DMM start timer. Unit: second " ::= { hwH248DmmParaEntry 2 } hwH248DmmParaShortTimer OBJECT-TYPE SYNTAX Integer32(1..99) MAX-ACCESS read-write STATUS current DESCRIPTION " Indicates the length of the DMM short timer. Unit: second " ::= { hwH248DmmParaEntry 3 } hwH248DmmParaLongTimer OBJECT-TYPE SYNTAX Integer32(1..99) MAX-ACCESS read-write STATUS current DESCRIPTION " Indicates the length of the DMM long timer Unit: second " ::= { hwH248DmmParaEntry 4 } hwH248DmmParaDurationTimer OBJECT-TYPE SYNTAX Integer32(100..9900) MAX-ACCESS read-write STATUS current DESCRIPTION " Indicates the length of the DMM duration timer. Unit: millisecond " ::= { hwH248DmmParaEntry 6 } hwOverloadReservalTable OBJECT-TYPE SYNTAX SEQUENCE OF HwOverloadReservalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table is used to config the DSP reserved parameter. The index of this table is hwDspOverloadReservalMgId. " ::= { hwIASVoipObjects 31 } hwOverloadReservalEntry OBJECT-TYPE SYNTAX HwOverloadReservalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table is used to config the DSP reserved parameter. The index of this entry is hwDspOverloadReservalMgId. " INDEX { hwDspOverloadReservalMgId } ::= { hwOverloadReservalTable 1 } HwOverloadReservalEntry ::= SEQUENCE { hwDspOverloadReservalMgId Integer32, hwTotalDspNum Integer32, hwTotalDspUseNum Integer32, hwReservalCat1DspNum Integer32, hwActualCat1DspUseNum Integer32, hwActualCat1CallUseDspNum Integer32, hwReservalCat2DspNum Integer32, hwActualCat2DspUseNum Integer32, hwActualCat2CallUseDspNum Integer32, hwDspReservalCommonNum Integer32, hwActualCommonDspUseNum Integer32, hwActualCommonCallUseDspNum Integer32 } hwDspOverloadReservalMgId OBJECT-TYPE SYNTAX Integer32(0..16777215) MAX-ACCESS not-accessible STATUS current DESCRIPTION " Indicates the MG ID to be configured. " ::= { hwOverloadReservalEntry 1 } hwTotalDspNum OBJECT-TYPE SYNTAX Integer32(0..3072) MAX-ACCESS read-write STATUS current DESCRIPTION " Indicates the total count of DSPs. " ::= { hwOverloadReservalEntry 2 } hwTotalDspUseNum OBJECT-TYPE SYNTAX Integer32(0..3072) MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the total count of occupied DSPs. Default: 0 " ::= { hwOverloadReservalEntry 3 } hwReservalCat1DspNum OBJECT-TYPE SYNTAX Integer32(0..3072) MAX-ACCESS read-write STATUS current DESCRIPTION " Indicates the count of the DSPs of category 1. " DEFVAL { 0 } ::= { hwOverloadReservalEntry 4 } hwActualCat1DspUseNum OBJECT-TYPE SYNTAX Integer32(0..3072) MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the count of the occupied DSPs of category 1. Default: 0 " ::= { hwOverloadReservalEntry 5 } hwActualCat1CallUseDspNum OBJECT-TYPE SYNTAX Integer32(0..3072) MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the count of the DSPs of category 1 occupied by calls. Default: 0 " ::= { hwOverloadReservalEntry 6 } hwReservalCat2DspNum OBJECT-TYPE SYNTAX Integer32(0..3072) MAX-ACCESS read-write STATUS current DESCRIPTION " Indicates the count of the DSPs of category 2. " DEFVAL { 0 } ::= { hwOverloadReservalEntry 7 } hwActualCat2DspUseNum OBJECT-TYPE SYNTAX Integer32(0..3072) MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the count of the occupied DSPs of category 2. Default: 0 " ::= { hwOverloadReservalEntry 8 } hwActualCat2CallUseDspNum OBJECT-TYPE SYNTAX Integer32(0..3072) MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the count of the DSPs of category 2 occupied by calls. Default: 0 " ::= { hwOverloadReservalEntry 9 } hwDspReservalCommonNum OBJECT-TYPE SYNTAX Integer32(0..3072) MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the count of common DSPs reserved for configuration. " ::= { hwOverloadReservalEntry 10 } hwActualCommonDspUseNum OBJECT-TYPE SYNTAX Integer32(0..3072) MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the count of occupied common DSPs. Default: 0 " ::= { hwOverloadReservalEntry 11 } hwActualCommonCallUseDspNum OBJECT-TYPE SYNTAX Integer32(0..3072) MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the count of the common DSPs occupied by calls. Default: 0 " ::= { hwOverloadReservalEntry 12 } hwH248TIDConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF HwH248TIDConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table is used to config H248 terminal ID. The index of this table is hwVAGId. " ::= { hwIASVoipObjects 32 } hwH248TIDConfigEntry OBJECT-TYPE SYNTAX HwH248TIDConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table is used to config H248 terminal ID. The index of this entry is hwVAGId. " INDEX { hwVAGId } ::= { hwH248TIDConfigTable 1 } HwH248TIDConfigEntry ::= SEQUENCE { hwVAGId Integer32, hwH248BraPrefix OCTET STRING, hwH248PraPrefix OCTET STRING, hwH248PstnPrefix OCTET STRING, hwH248RtpPrefix OCTET STRING, hwH248Separator OCTET STRING, hwH248R2Prefix OCTET STRING, hwH248DpnssPrefix OCTET STRING, hwH248Dass2Prefix OCTET STRING, hwH248BraTemplateIndex Integer32, hwH248PraTemplateIndex Integer32, hwH248PstnTemplateIndex Integer32, hwH248RtpTemplateIndex Integer32, hwH248R2TemplateIndex Integer32, hwH248DpnssTemplateIndex Integer32, hwH248Dass2TemplateIndex Integer32, hwH248IsNeedToConfigTID Integer32 } hwVAGId OBJECT-TYPE SYNTAX Integer32(0..16777215) MAX-ACCESS not-accessible STATUS current DESCRIPTION " Media Gateway ID. " ::= { hwH248TIDConfigEntry 1 } hwH248BraPrefix OBJECT-TYPE SYNTAX OCTET STRING(SIZE (1..64)) MAX-ACCESS read-write STATUS current DESCRIPTION " Indicates the BRA terminal prefix. " ::= { hwH248TIDConfigEntry 2 } hwH248PraPrefix OBJECT-TYPE SYNTAX OCTET STRING(SIZE (1..64)) MAX-ACCESS read-write STATUS current DESCRIPTION " Indicates the PRA terminal prefix. " ::= { hwH248TIDConfigEntry 3 } hwH248PstnPrefix OBJECT-TYPE SYNTAX OCTET STRING(SIZE (1..64)) MAX-ACCESS read-write STATUS current DESCRIPTION " Indicates the PSTN terminal prefix. " ::= { hwH248TIDConfigEntry 4 } hwH248RtpPrefix OBJECT-TYPE SYNTAX OCTET STRING(SIZE (1..64)) MAX-ACCESS read-write STATUS current DESCRIPTION " Indicates the RTP terminal prefix. " ::= { hwH248TIDConfigEntry 5 } hwH248Separator OBJECT-TYPE SYNTAX OCTET STRING(SIZE (0..7)) MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the terminal separator. " ::= { hwH248TIDConfigEntry 6 } hwH248R2Prefix OBJECT-TYPE SYNTAX OCTET STRING(SIZE (1..64)) MAX-ACCESS read-write STATUS current DESCRIPTION " Indicates the R2 terminal prefix. " ::= { hwH248TIDConfigEntry 7 } hwH248DpnssPrefix OBJECT-TYPE SYNTAX OCTET STRING(SIZE (1..64)) MAX-ACCESS read-write STATUS current DESCRIPTION " Indicates the DPNSS terminal prefix. " ::= { hwH248TIDConfigEntry 8 } hwH248Dass2Prefix OBJECT-TYPE SYNTAX OCTET STRING(SIZE (1..64)) MAX-ACCESS read-write STATUS current DESCRIPTION " Indicates the DASS2 terminal prefix. " ::= { hwH248TIDConfigEntry 9 } hwH248BraTemplateIndex OBJECT-TYPE SYNTAX Integer32(0..63) MAX-ACCESS read-write STATUS current DESCRIPTION " Indicates the index of the BRA TID profile. " ::= { hwH248TIDConfigEntry 10 } hwH248PraTemplateIndex OBJECT-TYPE SYNTAX Integer32(0..63) MAX-ACCESS read-write STATUS current DESCRIPTION " Indicates the index of the PRA TID profile. " ::= { hwH248TIDConfigEntry 11 } hwH248PstnTemplateIndex OBJECT-TYPE SYNTAX Integer32(0..63) MAX-ACCESS read-write STATUS current DESCRIPTION " Indicates the index of the PSTN TID profile. " ::= { hwH248TIDConfigEntry 12 } hwH248RtpTemplateIndex OBJECT-TYPE SYNTAX Integer32(0..63) MAX-ACCESS read-write STATUS current DESCRIPTION " Indicates the index of the RTP TID profile. " ::= { hwH248TIDConfigEntry 13 } hwH248R2TemplateIndex OBJECT-TYPE SYNTAX Integer32(0..63) MAX-ACCESS read-write STATUS current DESCRIPTION " Indicates the index of the R2 TID profile. " ::= { hwH248TIDConfigEntry 14 } hwH248DpnssTemplateIndex OBJECT-TYPE SYNTAX Integer32(0..63) MAX-ACCESS read-write STATUS current DESCRIPTION " Indicates the index of the DPNSS TID profile. " ::= { hwH248TIDConfigEntry 15 } hwH248Dass2TemplateIndex OBJECT-TYPE SYNTAX Integer32(0..63) MAX-ACCESS read-write STATUS current DESCRIPTION " Indicates the index of the DASS2 TID profile. " ::= { hwH248TIDConfigEntry 16 } hwH248IsNeedToConfigTID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates whether the terminal ID needs to be configured for the subscriber. Bit0 (low) to bit31 (high) respectively represent PSTN, BRA, PRA, DPNSS, DASS2, and R2. The remaining bits are reserved. (It is unavailable in the R17.) " ::= { hwH248TIDConfigEntry 17 } hwFEifIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the interface index (interface type + shelf + slot + port). " ::= { hwIASVoipAlarmOids 1 } hwVpuDspFailReason OBJECT-TYPE SYNTAX INTEGER{dsp-fault(1),voip-moudle-software-overload(2),voip-moudle-fault(3)} MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the definition of the cause of the DSP chip fault. Options: 1. dsp-fault(1) -dsp fault 2. voip-moudle-software-overload(2) -voip module software overload 3. voip-moudle-fault(3) -voip module fault " ::= { hwIASVoipAlarmOids 2 } hwVpuFeReson OBJECT-TYPE SYNTAX INTEGER{peer-nonautoneg(1),autoneg-succ(2),nonautoneg-online-succ(3),autoneg-online-fail(4),port-offline(5)} MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the definition of the cause of the VPU FE port fault. Options: 1. peer-nonautoneg(1) -peer nonautoneg 2. autoneg-succ(2) -autoneg succeed 3. nonautoneg-online-succ(3) -nonautoneg online succeed 4. autoneg-online-fail(4) -autoneg online fail 5. port-offline(5) -port offline " ::= { hwIASVoipAlarmOids 3 } hwVpuSubBIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the VPU subboard index. " ::= { hwIASVoipAlarmOids 4 } hwVpuDspChipIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the VPU DSP chip index. " ::= { hwIASVoipAlarmOids 5 } hwMedGwyAlarmMgId OBJECT-TYPE SYNTAX Integer32(0..16777215) MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the MG ID. " ::= { hwIASVoipAlarmOids 6 } ---------- Notification type under Node hwIASVoipAlarmTraps-------- hwVpuDspChipFail NOTIFICATION-TYPE OBJECTS { hwFEifIndex,hwVpuSubBIndex,hwVpuDspChipIndex,hwVpuDspFailReason } STATUS current DESCRIPTION " This notification indicates that the vpu dsp chip fail. " ::= { hwIASVoipAlarmTraps 1 } hwVpuDspChipRestore NOTIFICATION-TYPE OBJECTS { hwFEifIndex,hwVpuSubBIndex,hwVpuDspChipIndex,hwVpuDspFailReason } STATUS current DESCRIPTION " This notification indicates that the vpu dsp chip restore form fault. " ::= { hwIASVoipAlarmTraps 2 } hwVpuFeInterfaceFail NOTIFICATION-TYPE OBJECTS { hwFEifIndex,hwVpuFeReson } STATUS current DESCRIPTION " This notification indicates that the vpu fe port fail. " ::= { hwIASVoipAlarmTraps 3 } hwVpuFeInterfaceRestore NOTIFICATION-TYPE OBJECTS { hwFEifIndex,hwVpuFeReson } STATUS current DESCRIPTION " This notification indicates that the vpu fe port restore from fault. " ::= { hwIASVoipAlarmTraps 4 } hwMedGwyFailAlarm NOTIFICATION-TYPE OBJECTS { hwMedGwyAlarmMgId } STATUS current DESCRIPTION " This notification indicates that the mg interface failed. " ::= { hwIASVoipAlarmTraps 5 } hwMedGwyRestoreAlarm NOTIFICATION-TYPE OBJECTS { hwMedGwyAlarmMgId } STATUS current DESCRIPTION " This notification indicates that the mg interface restore. " ::= { hwIASVoipAlarmTraps 6 } hwVpuSubbFail NOTIFICATION-TYPE OBJECTS { hwFEifIndex,hwVpuSubBIndex,hwVpuDspFailReason } STATUS current DESCRIPTION " This notification indicates that the vpu dsp sub board fail. " ::= { hwIASVoipAlarmTraps 7 } hwVpuSubbRestore NOTIFICATION-TYPE OBJECTS { hwFEifIndex,hwVpuSubBIndex,hwVpuDspFailReason } STATUS current DESCRIPTION " This notification indicates that the vpu dsp sub board restore. " ::= { hwIASVoipAlarmTraps 8 } hwH248ProfileSupportTable OBJECT-TYPE SYNTAX SEQUENCE OF HwH248ProfileSupportEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table is used to set the H248 profile configuration. The index of this table is hwH248ProfileIndex. " ::= { hwIASVoipObjects 67 } hwH248ProfileSupportEntry OBJECT-TYPE SYNTAX HwH248ProfileSupportEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table is used to set the H248 profile configuration. The index of this entry is hwH248ProfileIndex. " INDEX { hwH248ProfileIndex } ::= { hwH248ProfileSupportTable 1 } HwH248ProfileSupportEntry ::= SEQUENCE { hwH248ProfileIndex Integer32, hwH248ProfileCfgName OCTET STRING, hwH248ProfileRegName OCTET STRING } hwH248ProfileIndex OBJECT-TYPE SYNTAX Integer32(0..254) MAX-ACCESS not-accessible STATUS current DESCRIPTION " Indicates the profile index. " ::= { hwH248ProfileSupportEntry 1 } hwH248ProfileCfgName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the configuration name of the profile. " ::= { hwH248ProfileSupportEntry 2 } hwH248ProfileRegName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the registration name (that is, the negotiation name) of the profile. " ::= { hwH248ProfileSupportEntry 3 } hwH248MedGwyCurTableTable OBJECT-TYPE SYNTAX SEQUENCE OF HwH248MedGwyCurTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table is used to query the current parameter configuration status of the MG interface. The index of this table is hwH248MgId. " ::= { hwIASVoipObjects 68 } hwH248MedGwyCurTableEntry OBJECT-TYPE SYNTAX HwH248MedGwyCurTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table is used to query the current parameter configuration status of the MG interface. The index of this entry is hwH248MgId. " INDEX { hwH248MgId } ::= { hwH248MedGwyCurTableTable 1 } HwH248MedGwyCurTableEntry ::= SEQUENCE { hwH248MgId Integer32, hwH248MedGwyProfileIndexCur Integer32, hwH248MedGwyH248VersionCur INTEGER, hwH248MedGwyHeartBeatTimerCur Integer32, hwH248MedGwyMIDTypeCur INTEGER, hwH248MedGwyDeviceNameCur OCTET STRING, hwH248ProfileNegoParaCur INTEGER, hwH248ProfileCfgNameCur OCTET STRING, hwH248ProfileNegoNameCur OCTET STRING, hwH248MedGwySigIPAddrNameCur OCTET STRING, hwH248MedGwyMediaIPAddrNameCur OCTET STRING, hwH248MedGwySigIPAddress1Cur IpAddress, hwH248MedGwyMediaIPAddress1Cur IpAddress } hwH248MgId OBJECT-TYPE SYNTAX Integer32(0..16777215) MAX-ACCESS not-accessible STATUS current DESCRIPTION " Indicates the MG ID. " ::= { hwH248MedGwyCurTableEntry 1 } hwH248MedGwyProfileIndexCur OBJECT-TYPE SYNTAX Integer32(0..254) MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the profile index that is currently used by the MG. " ::= { hwH248MedGwyCurTableEntry 2 } hwH248MedGwyH248VersionCur OBJECT-TYPE SYNTAX INTEGER{v1(1), -- version 1 v2(2), -- version 2 v3(3) -- version 3 } MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the current H.248 version of the MG. Options: 1. v1(1) -version 1 2. v2(2) -version 2 3. v3(3) -version 3 " ::= { hwH248MedGwyCurTableEntry 3 } hwH248MedGwyHeartBeatTimerCur OBJECT-TYPE SYNTAX Integer32(5..655|0) MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the current length of the initial heartbeat timer. The valid value range is 5..655, if the value is 0, the heartbeat is not started. Unit: second " ::= { hwH248MedGwyCurTableEntry 4 } hwH248MedGwyMIDTypeCur OBJECT-TYPE SYNTAX INTEGER{ip4Address(1), -- IP address domainName(2), -- domain name deviceName(3) -- device name } MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the current message MID type of the MG. Options: 1. ip4Address(1) -IP address 2. domainName(2) -domain name 3. deviceName(3) -device name " ::= { hwH248MedGwyCurTableEntry 5 } hwH248MedGwyDeviceNameCur OBJECT-TYPE SYNTAX OCTET STRING(SIZE (0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the current device name of the MG. " ::= { hwH248MedGwyCurTableEntry 6 } hwH248ProfileNegoParaCur OBJECT-TYPE SYNTAX INTEGER{ disable(1),enable(2) } MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates whether the profile currently used by the MG supports the profile parameter negotiation. Options: 1. disable(1) -disable 2. enable(2) -enable " ::= { hwH248MedGwyCurTableEntry 7 } hwH248ProfileCfgNameCur OBJECT-TYPE SYNTAX OCTET STRING(SIZE (1..67)) MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the configuration name of the H.248 profile currently used by the MG. " ::= { hwH248MedGwyCurTableEntry 8 } hwH248ProfileNegoNameCur OBJECT-TYPE SYNTAX OCTET STRING(SIZE (0..67)) MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the negotiation name of the H.248 profile currently used by the MG. " ::= { hwH248MedGwyCurTableEntry 9 } hwH248MedGwySigIPAddrNameCur OBJECT-TYPE SYNTAX OCTET STRING(SIZE (0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the current working dynamic signal IP name. " ::= { hwH248MedGwyCurTableEntry 10 } hwH248MedGwyMediaIPAddrNameCur OBJECT-TYPE SYNTAX OCTET STRING(SIZE (0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the current working dynamic media IP name. " ::= { hwH248MedGwyCurTableEntry 11 } hwH248MedGwySigIPAddress1Cur OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the signaling IP address of currently used by the MG. " ::= { hwH248MedGwyCurTableEntry 12 } hwH248MedGwyMediaIPAddress1Cur OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the media IP address of currently used by the MG. " ::= { hwH248MedGwyCurTableEntry 13 } ------ /* Start hwIASH248TrapsVbOids */ hwH248TrapRequestID OBJECT-TYPE SYNTAX Unsigned32(0..4294967295) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION " The h248 trap request ID. " ::= { hwIASH248TrapsVbOids 1 } hwH248MgStatus OBJECT-TYPE SYNTAX INTEGER { up(1), close(2), gracefulClose(3), waitAck(4), fault(5) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION " The status of the h248 media gateway. Options: 1. up(1) -normal 2. close(2) -closed 3. gracefulClose(3) -graceful closing 4. waitAck(4) -waiting for ACK 5. fault(5) -fault " ::= { hwIASH248TrapsVbOids 2 } hwH248TrapLastChangeTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION " The value of sysUpTime at the time the media gateway or the media gateway control entered its current status or media gateway control switched. " ::= { hwIASH248TrapsVbOids 3 } hwH248MgcIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION " The mgc ip address. " ::= { hwIASH248TrapsVbOids 4 } hwH248MgcIndex OBJECT-TYPE SYNTAX Unsigned32(0..1) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION " The current mgc index. " ::= { hwIASH248TrapsVbOids 5 } hwH248MgcStatus OBJECT-TYPE SYNTAX INTEGER{ up(1), down(2), standby(3) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION " The media gateway control status. Options: 1. up(1) -active 2. down(2) -shut down 3. standby(3) -standby " ::= { hwIASH248TrapsVbOids 6 } hwH248Frame OBJECT-TYPE SYNTAX Unsigned32(0..255) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION " The frame where mg user is configed. " ::= { hwIASH248TrapsVbOids 7 } hwH248Slot OBJECT-TYPE SYNTAX Unsigned32(0..255) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION " The slot where mg user is configed. " ::= { hwIASH248TrapsVbOids 8 } hwH248Port OBJECT-TYPE SYNTAX Unsigned32(0..255) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION " The port where mg user is configed. " ::= { hwIASH248TrapsVbOids 9 } hwH248LongConnectDuration OBJECT-TYPE SYNTAX Unsigned32(0..4294967295) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION " The duration of a long connect. " ::= { hwIASH248TrapsVbOids 10 } hwH248UserTelNo OBJECT-TYPE SYNTAX OCTET STRING(SIZE (1..16)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION " The user telphone number. " ::= { hwIASH248TrapsVbOids 11 } hwH248MgcPort OBJECT-TYPE SYNTAX Unsigned32(0..65535) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION " The UDP port of MGC connected. " ::= { hwIASH248TrapsVbOids 12 } hwH248OnlineUser OBJECT-TYPE SYNTAX Unsigned32(0..4294967295) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION " The number of online user. " ::= { hwIASH248TrapsVbOids 13 } hwH248InnerCall OBJECT-TYPE SYNTAX Unsigned32(0..4294967295) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION " The number of inner-call. " ::= { hwIASH248TrapsVbOids 14 } hwH248RejectCall OBJECT-TYPE SYNTAX Unsigned32(0..4294967295) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION " The number of calls rejected. " ::= { hwIASH248TrapsVbOids 15 } hwH248IsConfigTid OBJECT-TYPE SYNTAX Unsigned32(0..4294967295) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION " Indicates whether the terminal ID needs to be configured for the subscriber. Bit0 (low) to bit31 (high) respectively represent PSTN, BRA, PRA, DPNSS, DASS2, and R2. The remaining bits are reserved. " ::= { hwIASH248TrapsVbOids 16 } hwH248IsUpdateTid OBJECT-TYPE SYNTAX Unsigned32(0..4294967295) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION " Indicates whether the terminal ID needs to be updated for the subscriber. Bit0 (low) to bit31 (high) respectively represent PSTN, BRA, PRA, DPNSS, DASS2, and R2. The remaining bits are reserved. " ::= { hwIASH248TrapsVbOids 17 } ------ /* End hwIASH248TrapsVbOids */ ------ /* Start hwIASH248CommonTraps */ hwIASH248ResetTrap NOTIFICATION-TYPE OBJECTS { hwH248TrapRequestID, hwH248MedGwyId, hwH248MgStatus, hwH248TrapLastChangeTime } STATUS current DESCRIPTION " This notification indicates that the result of h248 media gateway reset operation. " ::= { hwIASH248CommonTraps 0 1 } hwIASH248ShutdownTrap NOTIFICATION-TYPE OBJECTS { hwH248TrapRequestID, hwH248MedGwyId, hwH248MgStatus, hwH248TrapLastChangeTime } STATUS current DESCRIPTION " This notification indicates that the h248 media gateway shutdown result. " ::= { hwIASH248CommonTraps 0 2 } hwIASH248MgStateTrap NOTIFICATION-TYPE OBJECTS { hwH248TrapRequestID, hwH248MedGwyId, hwH248MgStatus, hwH248TrapLastChangeTime } STATUS current DESCRIPTION " This notification indicates that the h248 media gateway status changes. " ::= { hwIASH248CommonTraps 0 3 } hwIASH248MgcSwitchTrap NOTIFICATION-TYPE OBJECTS { hwH248TrapRequestID, hwH248MedGwyId, hwH248MgcIndex, hwH248MgcStatus, hwH248TrapLastChangeTime } STATUS current DESCRIPTION " This notification indicates that the h248 media gateway control switchs. " ::= { hwIASH248CommonTraps 0 4 } hwIASH248MgcStateTrap NOTIFICATION-TYPE OBJECTS { hwH248TrapRequestID, hwH248MedGwyId, hwH248MgcIndex, hwH248MgcStatus, hwH248TrapLastChangeTime } STATUS current DESCRIPTION " This notification indicates that the h248 media gateway status changed. " ::= { hwIASH248CommonTraps 0 5 } hwIASH248MgLableTrap NOTIFICATION-TYPE OBJECTS { hwH248MedGwyId, hwH248MedGwyDesc } STATUS current DESCRIPTION " This notification indicates that the userlabel of the H248 interface changed. " ::= { hwIASH248CommonTraps 0 6 } hwIASH248TidUpdateTrap NOTIFICATION-TYPE OBJECTS { hwH248MedGwyId, hwH248IsConfigTid, hwH248IsUpdateTid } STATUS current DESCRIPTION " This notification indicates that the H248 terminal ID updated. " ::= { hwIASH248CommonTraps 0 7 } ------ /* End hwIASH248CommonTraps */ ------ /* Start hwIASH248AlarmTraps */ hwIASH248MgFaultTrap NOTIFICATION-TYPE OBJECTS { hwH248MedGwyId, hwH248MgcIpAddress, hwH248MgcPort, hwH248OnlineUser } STATUS current DESCRIPTION " This notification indicates that the h248 media gateway is closed. " ::= { hwIASH248AlarmTraps 0 1 } hwIASH248MgRestoreTrap NOTIFICATION-TYPE OBJECTS { hwH248MedGwyId, hwH248MgcIpAddress, hwH248MgcPort, hwH248InnerCall, hwH248RejectCall } STATUS current DESCRIPTION " This notification indicates that the h248 media gateway is normal. " ::= { hwIASH248AlarmTraps 0 2 } -- hwIASH248AbsentBandwidthTrap NOTIFICATION-TYPE -- OBJECTS {} -- STATUS current -- DESCRIPTION -- " -- This notification indicates that bandwidth occupied by VoIP calls exceeds the threshold. -- " -- ::= { hwIASH248AlarmTraps 0 3 } hwIASH248LongConnectTrap NOTIFICATION-TYPE OBJECTS { hwH248Frame, hwH248Slot, hwH248Port, hwH248LongConnectDuration, hwH248UserTelNo } STATUS current DESCRIPTION " This notification indicates that the H248 user has calls for a long time. " ::= { hwIASH248AlarmTraps 0 4 } ------ /* End hwIASH248AlarmTraps */ END