-- ============================================================================ -- Copyright (C) 2013 by HUAWEI TECHNOLOGIES. All rights reserved. -- Description: This mib is used for defining huawei's VDSL line management MIB objects. -- Reference: -- Version: V1.53 -- ============================================================================ HUAWEI-VDSL2-LINE-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, NOTIFICATION-TYPE, Integer32, Counter32, Counter64 FROM SNMPv2-SMI huaweiUtility FROM HUAWEI-MIB ifIndex FROM IF-MIB TruthValue, DateAndTime, RowStatus, TEXTUAL-CONVENTION FROM SNMPv2-TC hwFrameIndex, hwSlotIndex, hwPortIndex, hwPortOperStatus, hwPortPrimaryStatus, hwPortSecondaryStatus, hwConfigChangeIP FROM HUAWEI-DEVICE-MIB HCPerfIntervalThreshold, HCPerfTimeElapsed FROM HC-PerfHist-TC-MIB -- [RFC3705] hwXdslProfName FROM HUAWEI-XDSL-COMMON-MIB Vdsl2Unit, Vdsl2Direction, Vdsl2TransmissionModeType, Vdsl2RaMode, Vdsl2InitResult, Vdsl2OperationModes, Vdsl2PowerMngState, Vdsl2ConfPmsForce, Vdsl2LConfProfPmMode, Vdsl2LineLdsf, Vdsl2LdsfResult, Vdsl2SymbolProtectionDs, Vdsl2SymbolProtectionUs, Vdsl2MaxBer, Vdsl2ScMaskDs, Vdsl2ScMaskUs, Vdsl2Rfi, Vdsl2vdsltoneblackout, Vdsl2PsdMaskDs, Vdsl2PsdMaskUs, Vdsl2Tssi, Vdsl2BandPlan, Vdsl2LastTransmittedState, Vdsl2LineStatus, Vdsl2ChAtmStatus, Vdsl2ChPtmStatus, Vdsl2BandOptUsage, Vdsl2PSDClassMask, Vdsl2Profiles, Vdsl2DataPathMode, Vdsl2DpboEpsd, Vdsl2DpboEscm, Vdsl2UpboPsdBand, Vdsl2UpboKl0RefBand, Vdsl2UpboKlf, Vdsl2BitSwap, Vdsl2UpboBoostMode, Vdsl2ProfSwitchType, Vdsl2ForceINP, Vdsl2PhyRControl, Vdsl2ChEnabling, Vdsl2DataPathModeType, Vdsl2SubProfiles, Vdsl2SubProfilesWeight, Vdsl2Us0PsdMask, Vdsl2UpsPsdMaskSelection, Vdsl2TIPsdClassMask, Vdsl2PsdLimitMask, Vdsl2Us0Disable, Vdsl2CfgMode, Xdsl2Band, Vdsl2VirtualNoise, Vdsl2VirtualNoiseDs, Vdsl2VirtualNoiseUs, Vdsl2AutoProfile, Vdsl2StatusRtxUsed, Vdsl2Actmode FROM HUAWEI-VDSL2-LINE-TC-MIB -- [This document] MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF; vdslMIB MODULE-IDENTITY LAST-UPDATED "201307240000Z" ORGANIZATION "Huawei Technologies Co.,Ltd." CONTACT-INFO "Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China Website: http://www.huawei.com Email: support@huawei.com " DESCRIPTION "This mib is used for defining huawei's VDSL line management MIB objects." -- Revision history REVISION "201307240000Z" DESCRIPTION "V1.53,changes in this revision: Add leaf node hwvdsl2LConfTempTemplateChangeTrap, hwvdsl2LConfProfProfileChangeTrap, hwvdsl2ChConfProfProfileChangeTrap in hwvdsl2CommonTrapsPrefix. Add leaf node hwvdsl2ProfOperType in hwvdsl2TrapsVbOids. " REVISION "201306260000Z" DESCRIPTION "V1.52,changes in this revision: Add leaf node hwvdsl2PMLEverBeforeDisorderLeavingEvent, hwvdsl2PMLEverBeforeLof, hwvdsl2PMLEverBeforeLos, hwvdsl2PMLEverBeforeLop, hwvdsl2PMLEverBeforeLom, hwvdsl2PMLCurr15MDisorderLeavingEvent, hwvdsl2PMLCurr1DayDisorderLeavingEvent, hwvdsl2PMLCurr15MLof, hwvdsl2PMLCurr15MLos, hwvdsl2PMLCurr15MLop, hwvdsl2PMLCurr15MLom, hwvdsl2PMLCurr1DayLof, hwvdsl2PMLCurr1DayLos, hwvdsl2PMLCurr1DayLop, hwvdsl2PMLCurr1DayLom in vdsl2PMLineCurrTable. Add leaf node hwvdsl2PMLHist15MDisorderLeavingEvent, hwvdsl2PMLHist15MLof, hwvdsl2PMLHist15MLos, hwvdsl2PMLHist15MLop, hwvdsl2PMLHist15MLom in vdsl2PMLineHist15MinTable. Add leaf node hwvdsl2PMLHist1DDisorderLeavingEvent, hwvdsl2PMLHist1DLof, hwvdsl2PMLHist1DLos, hwvdsl2PMLHist1DLop, hwvdsl2PMLHist1DLom in vdsl2PMLineHist1DayTable. Modify leaf node vdsl2ChConfProfMaxDelayDs, vdsl2ChConfProfMaxDelayUs value range from (0..200) to (0..200 | 255). Add leaf node hwvdsl2LineStatusActPsdLimitMask in table vdsl2LineTable for getting actual limit PSD mask." REVISION "201302210000Z" DESCRIPTION "V1.51,changes in this revision: Add leaf node hwvdsl2PMLCurr15MSraDownShiftEvent, hwvdsl2PMLCurr15MSraUpShiftEvent, hwvdsl2PMLCurr1DaySraDownShiftEvent, hwvdsl2PMLCurr1DaySraUpShiftEvent in vdsl2PMLineCurrTable. Add leaf node hwvdsl2PMLHist15MSraDownShiftEvent, hwvdsl2PMLHist15MSraUpShiftEvent in vdsl2PMLineHist15MinTable. Add leaf node hwvdsl2PMLHist1DSraDownShiftEvent, hwvdsl2PMLHist1DSraUpShiftEvent in vdsl2PMLineHist1DayTable. Modify leaf node vdsl2LConfProfMaxNomAtpDs, vdsl2LConfProfMaxNomAtpUs, vdsl2SpectrumProfMaxNomAtpDs, vdsl2SpectrumProfMaxNomAtpUs value range from (0..205) to (0..510) " REVISION "201301200000Z" DESCRIPTION "V1.50,changes in this revision: Add leaf node hwvdsl2ChStatusUnlimitedVersionEtru in vdsl2ChannelStatusTable. Delete the node of vdsl2PrivSCStatusLinReal, vdsl2PrivSCStatusLinImg, vdsl2PrivSCStatusLog, vdsl2PrivSCStatusQln, vdsl2PrivSCStatusLnAtten, vdsl2PrivSCStatusSigAtten, vdsl2PrivSCStatusSnrMargin, modify the node name of vdsl2PrivSCStatusLinScale, vdsl2PrivSCStatusLogMt, vdsl2PrivSCStatusQlnMt, vdsl2PrivSCStatusAttainableRate, vdsl2PrivSCStatusActAtp, vdsl2PrivSCStatusRowStatus. Add leaf node hwvdsl2PMLEverBeforeSraDownShiftEvent, hwvdsl2PMLEverBeforeSraUpShiftEvent in vdsl2PMLineCurrTable. Add leaf node hwvdsl2LineAlarmConfProfilePSConfigAbnormalAlarmSwitch in vdsl2LineAlarmConfProfileTable. " REVISION "201211260000Z" DESCRIPTION "V1.49, changes in this revision: Add leaf node hwvdsl2LinePhyRcontrol in vdsl2LineTable. " REVISION "201211080000Z" DESCRIPTION "V1.48, changes in this revision: Add leaf node hwvdsl2LineSplitterMode, hwvdsl2LineBackup, hwvdsl2LineBackupPort in vdsl2LineTable. " REVISION "201208260000Z" DESCRIPTION "V1.47, changes in this revision: Add leaf node hwVdsl2LineAlarmConfProfileVictAbnormalVariationAlarmSwitch, hwVdsl2LineAlarmConfProfileDistAbnormalVariationAlarmSwitch, hwVdsl2LineAlarmConfProfileReceivedESAbnormalAlarmSwitch, hwVdsl2LineAlarmConfProfileNonVectoringCPEActivatedAlarmSwitch, hwVdsl2LineAlarmConfProfileFreqRetrainReachThresholdAlarmSwitch. Add leaf node hwvdsl2SCStatusSegmentQlnWithVectoring. " REVISION "201207200000Z" DESCRIPTION "V1.46, delete unnecessary en dashes. " REVISION "201204260000Z" DESCRIPTION "V1.45, add leaf node vdsl2LconfProfUpboKlAuto. Modify these leaf nodes:vdsl2ServProfRaMode,vdsl2ServProfCh1MinDataRateDs,vdsl2ServProfCh1MinDataRateUs, vdsl2ServProfCh1MaxDataRateDs,vdsl2ServProfCh1MaxDataRateUs,vdsl2DelayInpProfCh1MaxDelayDs, vdsl2DelayInpProfCh1MaxDelayUs,vdsl2DelayInpProfCh1MinProtectionDs,vdsl2DelayInpProfCh1MinProtectionUs. Add leaf nodes:hwvdsl2ServProfMinEtrRtxDs,hwvdsl2ServProfMinEtrRtxUs,hwvdsl2ServProfMaxEtrRtxDs,hwvdsl2ServProfMaxEtrRtxUs,hwvdsl2ServProfMaxNdrRtxDs, hwvdsl2ServProfMaxNdrRtxUs,hwvdsl2SpectrumProfRtxModeDs,hwvdsl2SpectrumProfRtxModeUs,hwvdsl2SpectrumProfProfLeftrThreshDs, hwvdsl2SpectrumProfProfLeftrThreshUs,hwvdsl2DelayInpProfCh1MaxDelayRtxDs,hwvdsl2DelayInpProfCh1MaxDelayRtxUs,hwvdsl2DelayInpProfCh1MinDelayRtxDs, hwvdsl2DelayInpProfCh1MinDelayRtxUs,hwvdsl2DelayInpProfCh1MinInpShineRtxDs,hwvdsl2DelayInpProfCh1MinInpShineRtxUs,hwvdsl2DelayInpProfCh1MinInp8ShineRtxDs, hwvdsl2DelayInpProfCh1MinInp8ShineRtxUs,hwvdsl2DelayInpProfCh1ShineRatioRtxDs,hwvdsl2DelayInpProfCh1ShineRatioRtxUs,hwvdsl2DelayInpProfCh1MinInpReinRtxDs, hwvdsl2DelayInpProfCh1MinInpReinRtxUs,hwvdsl2DelayInpProfCh1MinInp8ReinRtxDs,hwvdsl2DelayInpProfCh1MinInp8ReinRtxUs,hwvdsl2DelayInpProfCh1IatReinRtxDs, hwvdsl2DelayInpProfCh1IatReinRtxUs. " REVISION "201203200000Z" DESCRIPTION "V1.44, add leaf node hwVdslSCFextXLinScaleUs, hwVdslSCFextXlinScGroupSizeUs, hwVdslSCFextXLinBandUs hwVdslSCFextXlinRealUs, hwVdslSCFextXlinImgUs. Modify the description of these leaf nodes hwvdsl2LineActmode, vdsl2LineStatusXtuTransSys, vdsl2LineStatusLnAttenDs, vdsl2LineStatusLnAttenUs, vdsl2LineStatusSigAttenDs, vdsl2LineStatusSigAttenUs, vdsl2LineStatusSnrMarginDs, vdsl2LineStatusSnrMarginUs,vdsl2LineStatusAttainableRateDs, vdsl2LineStatusAttainableRateUs, vdsl2LineStatusActPsdDs, vdsl2LineStatusActPsdUs, vdsl2LineStatusActAtpDs, vdsl2LineStatusActAtpUs, vdsl2UpboProfKl0CpeVal, vdsl2LineStatusCodingGainDs, vdsl2LineStatusCodingGainUs, vdsl2LineStatusPcbDs, vdsl2UpboProfKl0CoVal, vdsl2UpboRxThreshDs, vdsl2UpboRxThreshUs, hwvdsl2LineStatusLineRateDs, hwvdsl2LineStatusLineRateUs, vdsl2ChStatusActDataRate, vdsl2ChStatusPrevDataRate, vdsl2ChStatusActDelay, vdsl2ChStatusINP, vdsl2ChStatusRSRedundancy, vdsl2ChStatusRSSymbols, vdsl2ChStatusInterDepth, vdsl2ChStatusSymbolLength, vdsl2ChStatusRSSize, vdsl2ChStatusInterBlockLength, vdsl2ChStatusLPATH, vdsl2ChStatusPhyRrrcBits, vdsl2ChStatusPhyRtxQueue, vdsl2ChStatusActNetDataRate, vdsl2ChStatusActINPAgainstREIN, vdsl2UpboRxThreshDs, vdsl2UpboRxThreshUs. Add the definition of the leaf node vdsl2MaximumInterleavedDepth. " REVISION "201112050000Z" DESCRIPTION "V1.43, add leaf node vdsl2SCStatusBandUpbokle,vdsl2UpboRxThreshDs,vdsl2UpboRxThreshUs,hwvdsl2LineStatusLineRateDs, hwvdsl2LineStatusLineRateUs,vdsl2LConfProfAeleMode,vdsl2LConfProfUpboElmt. Add the definition of the table: hwVdslSCFextTable. Add leaf node hwVdsl2LineAlarmConfProfileLegacyCpeAlarmSwitch, hwvdsl2UnSuppVectorPortActFailAlarmTrap. " REVISION "201110150000Z" DESCRIPTION "V1.42, add leaf node hwVdsl2LineAlarmConfProfileDyingGaspAlarmSwitch, hwVdsl2LineAlarmConfProfileActiveFailAlarmSwitch, hwVdsl2LineAlarmConfProfileRateChangeAlarmSwitch. " REVISION "201109280000Z" DESCRIPTION "V1.41, add leaf node vdsl2ProfileAutoNegotiationSwitch for the VDSL2 G993.2 profile auto-negotiation function. modify the name of the nodes from vdsl2DpboEselGlobalConfig to vdsl2GlobalConfig." REVISION "201108270000Z" DESCRIPTION "V1.40, modify the value range of the leaf node vdsl2NoiseMarginProfDsThresholdDs, vdsl2NoiseMarginProfUsThresholdDs, vdsl2NoiseMarginProfDsThresholdUs, vdsl2NoiseMarginProfUsThresholdUs." REVISION "201106080000Z" DESCRIPTION "V1.39, add the definition of the leaf node vdsl2LConfProfForceInpDs, vdsl2LConfProfForceInpUs for force framer setting for impulse noise protection. Add the definition of the leaf node vdsl2ChConfProfInitPolicy for setting channel initialization policy." REVISION "201105100000Z" DESCRIPTION "V1.38, add the definition of the leaf node vdsl2LineStatusLastRetrainInfo for getting the last retrained information." REVISION "201104140000Z" DESCRIPTION "V1.37, modify the description of these leaf nodes:vdsl2LConfProfPsdMaskSelectUs,vdsl2PMLHist15MInmainpeq, vdsl2PMLHist15MInmame,vdsl2PMLHist15MInmaiat,vdsl2PMLHist1DInmainpeq,vdsl2PMLHist1DInmame,vdsl2PMLHist1DInmaiat. Delete the default value of vdsl2LConfProfPsdMaskSelectUs. Modify the default value of vdsl2LConfProfPSDClassMask and vdsl2LConfProfProfiles. Modify the vdsl2LConfProfPsdMaskSelectUs ranges from 0 to 9." REVISION "201102210000Z" DESCRIPTION "V1.36, Modify the description of these leaf nodes about default value:vdsl2LConfProfRaUsNrmDs,vdsl2LConfProfRaUsNrmUs,vdsl2LConfProfRaUsTimeDs, vdsl2LConfProfRaUsTimeUs,vdsl2LConfProfRaDsNrmsDs,vdsl2LConfProfRaDsNrmsUs,vdsl2LConfProfRaDsTimeDs,vdsl2LConfProfRaDsTimeUs, vdsl2LConfProfMaxSnrmDs,vdsl2LConfProfMaxSnrmUs,vdsl2LConfProfMinSnrmDs,vdsl2LConfProfMinSnrmUs,vdsl2LConfProfL2Time,vdsl2LConfProfL2Atpr, vdsl2LConfProfL2Atprt,vdsl2DelayInpProfForceINP. Modify the Description of these leaf nodes:vdsl2LineStatusSnrMarginDs,vdsl2LineStatusSnrMarginUs,vdsl2LineStatusActAtpDs, vdsl2LineStatusActAtpUs,vdsl2LineStatusActPsdDs,vdsl2LineStatusActPsdUs. " REVISION "201012120900Z" DESCRIPTION "V1.35, Modify these leaf nodes:vdsl2LConfProfRaModeDs,vdsl2ChConfProfMinDataRateDs,vdsl2ChConfProfMinDataRateUs,vdsl2ChConfProfMaxDataRateDs, vdsl2ChConfProfMaxDataRateUs,vdsl2ChConfProfMaxDelayDs,vdsl2ChConfProfMaxDelayUs,vdsl2ChConfProfMinProtectionDs,vdsl2ChConfProfMinProtectionUs, vdsl2ChConfProfUsDataRateDs,vdsl2ChConfProfUsDataRateUs,vdsl2ChConfProfDsDataRateDs and vdsl2ChConfProfDsDataRateUs. add leaf nodes:vdsl2LineAlarmConfProfileXtucThresh15MinLeftrs,vdsl2LineAlarmConfProfileXturThresh15MinLeftrs,vdsl2LConfProfRtxModeDs, vdsl2LConfProfRtxModeUs,vdsl2LConfProfLeftrThreshDs,vdsl2LConfProfLeftrThreshUs,vdsl2ChConfProfMinEtrRtxDs,vdsl2ChConfProfMinEtrRtxUs, vdsl2ChConfProfMaxEtrRtxDs,vdsl2ChConfProfMaxEtrRtxUs,vdsl2ChConfProfMaxNdrRtxDs,vdsl2ChConfProfMaxNdrRtxUs,vdsl2ChConfProfMaxDelayRtxDs, vdsl2ChConfProfMaxDelayRtxUs,vdsl2ChConfProfMinDelayRtxDs,vdsl2ChConfProfMinDelayRtxUs,vdsl2ChConfProfMinInpShineRtxDs,vdsl2ChConfProfMinInpShineRtxUs, vdsl2ChConfProfMinInp8ShineRtxDs,vdsl2ChConfProfMinInp8ShineRtxUs,vdsl2ChConfProfShineRatioRtxDs,vdsl2ChConfProfShineRatioRtxUs,vdsl2ChConfProfMinInpReinRtxDs, vdsl2ChConfProfMinInpReinRtxUs,vdsl2ChConfProfMinInp8ReinRtxDs,vdsl2ChConfProfMinInp8ReinRtxUs,vdsl2ChConfProfIatReinRtxDs,vdsl2ChConfProfIatReinRtxUs. " REVISION "201009270900Z" DESCRIPTION "V1.34, Modify the Description of the whole MIB file. modify the range of node about VDSL channel rate in table vdsl2ServProfTable." REVISION "201009070900Z" DESCRIPTION "V1.33,Modify the Description of hwvdsl2PortStatusChangeTrap." REVISION "201008030900Z" DESCRIPTION "V1.32, add the definition of the trap node ,include: hwvdsl2TemplateIDChangeTrap. add leaf node hwVdsl2TemplateType in table hwvdsl2TrapsVbOids. modify the definition of the trap node hwvdsl2DownstreamRateLowerThresholdAlarmTrap. modify the range of vdsl2LineAlarmCnfgTemplate from 1...32 to 0...32 in vdsl2LineTable. Modify the description of the trap node ,include:hwvdsl2DownstreamRateLowerThresholdAlarmTrap, hwvdsl2ChannelUpstreamLowerThresholdAlarmTrap,hwvdsl2ChannelUpstreamExcThreAlarmTrap,hwvdsl2ChannelUpstreamRestoreThreAlarmTrap, hwvdsl2ChannelDownstreamExcThreAlarmTrap,hwvdsl2ChannelDownstreamRestoreThreAlarmTrap." REVISION "201006220900Z" DESCRIPTION "V1.31,Modify chinese character." REVISION "201005200900Z" DESCRIPTION "V1.30, modify the definition of the trap node hwvdsl2PortStatusChangeTrap." REVISION "201005130900Z" DESCRIPTION "V1.29, modify the vdsl2LConfProfL3Time ranges from 0 to 65535 seconds." REVISION "201005050900Z" DESCRIPTION "V1.28, modify the errors of the MIB file." REVISION "201004020000Z" DESCRIPTION "V1.27, add the definition of the trap node ,include:hwvdsl2DeltOperResultTrap. modify the definition of the trap node ,include:hwvdsl2PortAutoDeactiveLineFaultAlarmTrap, hwvdsl2PortReactiveAfterRecoverAlarmTrap,hwvdsl2PerformanceStatiReachThresholdAlarmTrap, hwvdsl2DownstreamRateLowerThresholdAlarmTrap, hwvdsl2VTURPowerOffAlarmTrap, hwvdsl2PortActiveRateChangeAlarmTrap, hwvdsl2ChannelUpstreamExcThreAlarmTrap, hwvdsl2ChannelUpstreamRestoreThreAlarmTrap, hwvdsl2ChannelDownstreamExcThreAlarmTrap, hwvdsl2ChannelDownstreamRestoreThreAlarmTrap." REVISION "201001200000Z" DESCRIPTION "V1.26, add leaf node vdsl2PMLineCurr15MStartTime, vdsl2PMLineCurr1DayStartTime, vdsl2PMLineCurrInit15MStartTime, vdsl2PMLineCurrInit1DayStartTime, vdsl2PMLHist15MStartTime, vdsl2PMLHist1DStartTime, vdsl2PMLHistInit15MStartTime, vdsl2PMLHistinit1DStartTime, vdsl2PMChCurr15MStartTime, vdsl2PMChCurr1DayStartTime, vdsl2PMChHist15MStartTime, vdsl2PMChHist1DStartTime for performance monitoring. create table hwvdsl2AutoDeleteProfUnused,add leaf node hwvdsl2AutoDeleteProfUnusedProfType, hwvdsl2AutoDeleteProfUnusedOperType for deleting unused profile. Add leaf node vdsl2UpboProfKl0CoVal in vdsl2LineTable to achieve the KL0 feature, The node vdsl2UpboProfKl0Val is renamed vdsl2UpboProfKl0CpeVal." REVISION "201001120000Z" DESCRIPTION "V1.25, add the definition of the trap node,include: hwVdsl2ModeSwitchTrap hwVdsl2CurrentModeTrap hwVdsl2PortStatusChangeTrap hwvdsl2AutoDeactivateLackLicensesAlarmTrap hwvdsl2PortAutoDeactiveLineFaultAlarmTrap hwvdsl2PortReactiveAfterRecoverAlarmTrap hwvdsl2PerformanceStatiReachThresholdAlarmTrap hwvdsl2DownstreamRateLowerThresholdAlarmTrap hwvdsl2ActivePortFailConfigParaAlarmTrap hwvdsl2PerformanceStatisReachThresholdAlarmTrap hwvdsl2ChannelUpstreamLowerThresholdAlarmTrap hwvdsl2VTURPowerOffAlarmTrap hwvdsl2PortActiveRateChangeAlarmTrap hwvdsl2ChipsetUnavailableAlarmTrap hwvdsl2ChipsetRecoverAlarmTrap " REVISION "201001050000Z" DESCRIPTION "V1.24, Add leaf node vdsl2UpboProfKl0CoVal in vdsl2LineTable to achieve the KL0 feature, The node vdsl2UpboProfKl0Val is renamed vdsl2UpboProfKl0CpeVal." REVISION "200906050000Z" DESCRIPTION "V1.19, Add leaf node in table vdsl2LineConfProfTable, vdsl2ChConfProfileTable, vdsl2PMLineCurrTable, vdsl2PMLineHist15MinTable, and vdsl2PMLineHist1DayTable to achieve the save our showtime and the impulse noise monitor features. Delete enumerated values AnnexA998-D-48, AnnexA998-D-128, AnnexB998E17-M2x-A, and AnnexB998ADE17-M2x-M from leaf node vdsl2LConfProfPSDClassMask." REVISION "200806030000Z" DESCRIPTION "V1.10, add leaf node hwadslLConfProfAdslMode for the actual value of coding gain parameter, add leaf node vdsl2SCStatusSegmentTable for the sub-carriers." REVISION "200604270000Z" DESCRIPTION "V1.00, Initial version." ::= { huaweiUtility 115 } vdsl2 OBJECT IDENTIFIER ::= { vdslMIB 1 } vdsl2Line OBJECT IDENTIFIER ::= { vdsl2 1 } vdsl2Status OBJECT IDENTIFIER ::= { vdsl2 2 } vdsl2Inventory OBJECT IDENTIFIER ::= { vdsl2 3 } vdsl2PM OBJECT IDENTIFIER ::= { vdsl2 4 } vdsl2Profile OBJECT IDENTIFIER ::= { vdsl2 5 } vdsl2Scalar OBJECT IDENTIFIER ::= { vdsl2 6 } vdsl2Notifications OBJECT IDENTIFIER ::= { vdsl2 0 } vdsl2Conformance OBJECT IDENTIFIER ::= { vdsl2 8 } vdsl2Mode OBJECT IDENTIFIER ::= { vdsl2 9 } vdsl2GlobalConfig OBJECT IDENTIFIER ::= { vdsl2 10 } hwvdsl2AutoDeleteProfUnused OBJECT IDENTIFIER ::= { vdsl2 11 } hwvdsl2Traps OBJECT IDENTIFIER ::= { vdsl2 15 } hwvdsl2TrapsVbOids OBJECT IDENTIFIER ::= { vdsl2 16 } vdsl2PMLine OBJECT IDENTIFIER ::= { vdsl2PM 1 } vdsl2PMChannel OBJECT IDENTIFIER ::= { vdsl2PM 2 } vdsl2ProfileLine OBJECT IDENTIFIER ::= { vdsl2Profile 1 } vdsl2ProfileChannel OBJECT IDENTIFIER ::= { vdsl2Profile 2 } vdsl2ProfileAlarmConf OBJECT IDENTIFIER ::= { vdsl2Profile 3 } vdsl2ProfileTIMode OBJECT IDENTIFIER ::= { vdsl2Profile 4 } vdsl2ScalarSC OBJECT IDENTIFIER ::= { vdsl2Scalar 1 } hwvdsl2CommonTraps OBJECT IDENTIFIER ::= { hwvdsl2Traps 1 } hwvdsl2CommonTrapsPrefix OBJECT IDENTIFIER ::= { hwvdsl2CommonTraps 0 } hwvdsl2AlarmTraps OBJECT IDENTIFIER ::= { hwvdsl2Traps 2 } hwvdsl2AlarmTrapsPrefix OBJECT IDENTIFIER ::= { hwvdsl2AlarmTraps 0 } -- vdsl2LineTable vdsl2LineTable OBJECT-TYPE SYNTAX SEQUENCE OF Vdsl2LineEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table vdsl2LineTable contains configuration, command and status parameters of the VDSL2 line. The index of this table is ifIndex. " ::= { vdsl2Line 1 } vdsl2LineEntry OBJECT-TYPE SYNTAX Vdsl2LineEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table vdsl2LineTable contains configuration, command and status parameters of the VDSL2 line. The index of this entry is ifIndex. " INDEX { ifIndex } ::= { vdsl2LineTable 1 } Vdsl2LineEntry ::= SEQUENCE { vdsl2LineCnfgTemplate OCTET STRING, vdsl2LineAlarmCnfgTemplate OCTET STRING, vdsl2LineCmndConfPmsf Vdsl2ConfPmsForce, vdsl2LineCmndConfLdsf Vdsl2LineLdsf, vdsl2LineCmndConfLdsfFailReason Vdsl2LdsfResult, vdsl2LineCmndAutomodeColdStart TruthValue, vdsl2LineStatusXtuTransSys Unsigned32, vdsl2LineStatusPwrMngState Vdsl2PowerMngState, vdsl2LineStatusInitResult Vdsl2InitResult, vdsl2LineStatusLastStateDs Vdsl2LastTransmittedState, vdsl2LineStatusLastStateUs Vdsl2LastTransmittedState, vdsl2LineStatusXtur Vdsl2LineStatus, vdsl2LineStatusXtuc Vdsl2LineStatus, vdsl2LineStatusLnAttenDs Unsigned32, vdsl2LineStatusLnAttenUs Unsigned32, vdsl2LineStatusSigAttenDs Unsigned32, vdsl2LineStatusSigAttenUs Unsigned32, vdsl2LineStatusSnrMarginDs Integer32, vdsl2LineStatusSnrMarginUs Integer32, vdsl2LineStatusAttainableRateDs Unsigned32, vdsl2LineStatusAttainableRateUs Unsigned32, vdsl2LineStatusActPsdDs Integer32, vdsl2LineStatusActPsdUs Integer32, vdsl2LineStatusActAtpDs Integer32, vdsl2LineStatusActAtpUs Integer32, vdsl2LineBandPlan Vdsl2BandPlan, vdsl2LinePsdMaskClassSelection Vdsl2TIPsdClassMask, vdsl2LineCurrentVdsl2Profile Vdsl2SubProfiles, vdsl2LineCnfgServiceProf OCTET STRING, vdsl2LineCnfgSpectrumProf OCTET STRING, vdsl2LineCnfgDpboProf OCTET STRING, vdsl2LineCnfgUpboProf OCTET STRING, vdsl2LineCnfgNoiseMarginProf OCTET STRING, vdsl2LineCnfgDelayINPProf OCTET STRING, vdsl2UpboProfKl0CpeVal Unsigned32, vdsl2LineStatusCodingGainDs Unsigned32, vdsl2LineStatusCodingGainUs Unsigned32, vdsl2LineStatusPcbDs Unsigned32, hwvdslDlmDsmprofile OCTET STRING, hwvdsl2LineActmode Vdsl2Actmode, vdsl2UpboProfKl0CoVal Unsigned32, vdsl2LineStatusRtxUsedDs Vdsl2StatusRtxUsed, vdsl2LineStatusRtxUsedUs Vdsl2StatusRtxUsed, vdsl2LineStatusLastRetrainInfo INTEGER, vdsl2UpboRxThreshDs Integer32, vdsl2UpboRxThreshUs Integer32, hwvdsl2LineStatusLineRateDs Unsigned32, hwvdsl2LineStatusLineRateUs Unsigned32, hwvdsl2LineSplitterMode INTEGER, hwvdsl2LineBackup INTEGER, hwvdsl2LineBackupPort Unsigned32, hwvdsl2LinePhyRcontrol INTEGER, hwvdsl2LineStatusActPsdLimitMask INTEGER } vdsl2LineCnfgTemplate OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this object identifies the row in the VDSL2 Line Configuration Templates Table, (Vdsl2ConfTemplatesTable), which applies for this VDSL2 line. " REFERENCE "DSL Forum TR-90, paragraph 5.1.1" DEFVAL { "DEFVAL" } ::= { vdsl2LineEntry 1 } vdsl2LineAlarmCnfgTemplate OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this object identifies the row in the VDSL2 Line Alarm Configuration Template Table, (vdsl2LineAlarmConfTemplateTable), which applies to this VDSL2 line. " REFERENCE "DSL Forum TR-90, paragraph 5.1.1" DEFVAL { "DEFVAL" } ::= { vdsl2LineEntry 2 } vdsl2LineCmndConfPmsf OBJECT-TYPE SYNTAX Vdsl2ConfPmsForce MAX-ACCESS read-write STATUS current DESCRIPTION "Power management state forced. Defines the line states to be forced by the near-end xTU on this line. Options: 1. l3toL0(0) - Force the line to transition from the L3 idle state to the L0 full-on state 2. l0toL2(2) - Force the line to transition from L0 full on to L2 low power state 3. l0orL2toL3(3) - Force the line to transition from the L0 full-on or L2 low power state to the L3 idle state 4. invalidValue(-1) -Invalid value " REFERENCE "ITU-T G.997.1, paragraph 7.3.1.1.3" DEFVAL { l3toL0 } ::= { vdsl2LineEntry 3 } vdsl2LineCmndConfLdsf OBJECT-TYPE SYNTAX Vdsl2LineLdsf MAX-ACCESS read-write STATUS current DESCRIPTION "Loop diagnostics mode forced (LDSF). Defines whether the line should be forced into the loop diagnostics mode by the near-end xTU on this line or only be responsive to loop diagnostics initiated by the far-end xTU. " REFERENCE "ITU-T G.997.1, paragraph 7.3.1.1.8" DEFVAL { inhibit } ::= { vdsl2LineEntry 4 } vdsl2LineCmndConfLdsfFailReason OBJECT-TYPE SYNTAX Vdsl2LdsfResult MAX-ACCESS read-only STATUS current DESCRIPTION "The status of the recent occasion the Loop diagnostics mode forced (LDSF) was issued for the associated line. Options: 1. none(1) - The default value in case LDSF was never requested for the associated line 2. success(2) - The recent command completed successfully 3. inProgress(3) - The Loop Diagnostics process is in progress 4. unsupported(4) - The NE or the line card doesn't support LDSF 5. cannotRun(5) - The NE cannot initiate the command, due to a non specific reason 6. aborted(6) - The Loop Diagnostics process aborted 7. failed(7) - The Loop Diagnostics process failed 8. illegalMode(8) - The NE cannot initiate the command, due to the specific mode of the relevant line 9. adminUp(9) - The NE cannot initiate the command, as the relevant line is administratively 'Up' 10.tableFull(10) - The NE cannot initiate the command, due to reaching the maximum number of rows in the results table 11.noResources(11) - The NE cannot initiate the command, due to lack of internal memory resources Default: none(1) " ::= { vdsl2LineEntry 5 } vdsl2LineCmndAutomodeColdStart OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Automode cold start forced. This parameter is defined in order to improve testing of the performance of ATUs supporting automode when it is enabled in the MIB. Change the value of this parameter to 'true' indicates a change in loop conditions applied to the devices under test. The ATUs shall reset any historical information used for automode and for shortening G.994.1 handshake and initialization. Automode is the case where multiple operation-modes are enabled through the vdsl2LConfProfXtuTransSysEna object in the line configuration profile being used for the VDSL line, and where the selection of the actual operation-mode depends not only on the common capabilities of both ATUs (as exchanged in G.994.1), but also on achievable data rates under given loop conditions. " REFERENCE "ITU-T G.997.1, paragraph 7.3.1.1.10" DEFVAL { false } ::= { vdsl2LineEntry 6 } vdsl2LineStatusXtuTransSys OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The xTU Transmission System (XTS) in use. This parameter may be derived from the handshaking procedures defined in Recommendation G.994.1. The invalid value is 4294967295. If data on the port is invalid or no data is generated on the port because the port has not been activated, the invalid value will be returned. One of VDSL2 line transmission modes: ANSI_T1413(1) ETSI_DTS_TM06006(2) G9921_POTS_NONOVERLAP(3) G9921_POTS_OVERLAP(4) G9921_ISDN_NONOVERLAP(5) G9921_ISDN_OVERLAP(6) G9921_TCMISDN_NONOVERLAP(7) G9921_TCMISDN_OVERLAP(8) G9922_POTS_NONOVERLAP(9) G9922_POTS_OVERLAP(10) G9922_TCMISDN_NONOVERLAP(11) G9922_TCMISDN_OVERLAP(12) G9921_TCMISDN_SYMMETRIC(13) G9923_POTS_NONOVERLAP(19) G9923_POTS_OVERLAP(20) G9923_ISDN_NONOVERLAP(21) G9923_ISDN_OVERLAP(22) G9924_POTS_NONOVERLAP(25) G9924_POTS_OVERLAP(26) G9923_ANNEXI_ALLDIGI_NONOVERLAP(29) G9923_ANNEXI_ALLDIGI_OVERLAP(30) G9923_ANNEXJ_ALLDIGI_NONOVERLAP(31) G9923_ANNEXJ_ALLDIGI_OVERLAP(32) G9924_ANNEXI_ALLDIGI_NONOVERLAP(33) G9924_ANNEXI_ALLDIGI_OVERLAP(34) G9923_ANNEXL_POTS_NONOVERLAP_MODE1_WIDEUS(35) G9923_ANNEXL_POTS_NONOVERLAP_MODE2_NARROWUS(36) G9923_ANNEXL_POTS_OVERLAP_MODE3_WIDEUS(37) G9923_ANNEXL_POTS_NONOVERLAP_MODE4_NARROWUS(38) G9923_ANNEXM_POTS_NONOVERLAP(39) G9923_ANNEXM_POTS_OVERLAP(40) G9925_POTS_NONOVERLAP(41) G9925_POTS_OVERLAP(42) G9925_ISDN_NONOVERLAP(43) G9925_ISDN_OVERLAP(44) G9925_ANNEXI_ALLDIGI_NONOVERLAP(47) G9925_ANNEXI_ALLDIGI_OVERLAP(48) G9925_ANNEXJ_ALLDIGI_NONOVERLAP(49) G9925_ANNEXJ_ALLDIGI_OVERLAP(50) G9925_ANNEXM_POTS_NONOVERLAP(51) G9925_ANNEXM_POTS_OVERLAP(52) G9931(65) G9932_ANNEXA_POTS(73) G9932_ANNEXA_ISDN(74) G9932_ANNEXB_POTS(75) G9932_ANNEXB_ISDN(76) G9932_ANNEXC_POTS(77) G9932_ANNEXC_ISDN(78) G9935(79) G9935_FRIENDLY_DS(80) G9935_FULL_FRIENDLY(81) " ::= { vdsl2LineEntry 7 } vdsl2LineStatusPwrMngState OBJECT-TYPE SYNTAX Vdsl2PowerMngState MAX-ACCESS read-only STATUS current DESCRIPTION "The current power management state. Options: 1. L0 - Synchronized and full transmission 2. L1 - Low Power with reduced net data rate 3. L2 - Low Power with reduced net data rate 4. L3 - No power The various possible values are:l0(0), l1(1), l2(2), l3(3). " REFERENCE "ITU-T G.997.1, paragraph 7.5.1.2" ::= { vdsl2LineEntry 8 } vdsl2LineStatusInitResult OBJECT-TYPE SYNTAX Vdsl2InitResult MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the result of the last full initialization performed on the line. Options: 1. noFail (0) - Successful initialization 2. configError (1) - Configuration failure 3. configNotFeasible (2) - Configuration details not supported 4. commFail (3) - Communication failure 5. noPeerXtu (4) - Peer xTU not detected 6. otherCause (5) - Other initialization failure reason 7. ginpNotSelected(6) - G.998.4 Retransmission mode was not selected while RTX_MODE = FORCED or with RTX_MODE = RTX_TESTMODE 8. invalidValue(-1) - Invalid value " REFERENCE "ITU-T G.997.1, paragraph 7.5.1.3" ::= { vdsl2LineEntry 9 } vdsl2LineStatusLastStateDs OBJECT-TYPE SYNTAX Vdsl2LastTransmittedState MAX-ACCESS read-only STATUS current DESCRIPTION "The last successful transmitted initialization state in the downstream direction in the last full initialization performed on the line. States are per the specific VDSL type and are counted from 0 (if G.994.1 is used) or 1 (if G.994.1 is not used) up to Showtime. " REFERENCE "ITU-T G.997.1, paragraph 7.5.1.4" ::= { vdsl2LineEntry 10 } vdsl2LineStatusLastStateUs OBJECT-TYPE SYNTAX Vdsl2LastTransmittedState MAX-ACCESS read-only STATUS current DESCRIPTION "The last successful transmitted initialization state in the upstream direction in the last full initialization performed on the line. States are per the specific VDSL type and are counted from 0 (if G.994.1 is used) or 1 (if G.994.1 is not used) up to Showtime. " REFERENCE "ITU-T G.997.1, paragraph 7.5.1.5" ::= { vdsl2LineEntry 11 } vdsl2LineStatusXtur OBJECT-TYPE SYNTAX Vdsl2LineStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates current state (existing failures) of the xTU-R. This is a bit-map of possible conditions. The various bit positions are: noFailure(0), lossOfFraming(1), lossOfSignal(2), lossOfPower(3), initFailure(4) - never active on xTU-R " REFERENCE "ITU-T G.997.1, paragraph 7.1.1.2" ::= { vdsl2LineEntry 12 } vdsl2LineStatusXtuc OBJECT-TYPE SYNTAX Vdsl2LineStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates current state (existing failures) of the xTU-C. This is a bit-map of possible conditions. This BITS structure can report the following failures: 1. noDefect (0) - This bit position positively reports that no defect or failure exist 2. lossOfFraming (1) - Loss of frame synchronization 3. lossOfSignal (2) - Loss of signal 4. lossOfPower (3) - Loss of power. Usually this failure may be reported for CPE units only 5. initFailure (4) - Recent initialization process failed " REFERENCE "ITU-T G.997.1, paragraph 7.1.1.1" ::= { vdsl2LineEntry 13 } vdsl2LineStatusLnAttenDs OBJECT-TYPE SYNTAX Unsigned32 UNITS "0.1 dB" MAX-ACCESS read-only STATUS current DESCRIPTION "The measured difference in the total power transmitted by the xTU-C and the total power received by the xTU-R over all sub-carriers during diagnostics mode and initialization. It ranges from 0 to 1270 units of 0.1 dB (Physical values are 0 to 127 dB). A value of all 1's indicates the line attenuation is out of range to be represented. The invalid value is 4294967295. If data on the port is invalid or no data is generated on the port because the port has not been activated, the invalid value will be returned. Unit: 0.1 dB " REFERENCE "ITU-T G.997.1, paragraph 7.5.1.6" ::= { vdsl2LineEntry 14 } vdsl2LineStatusLnAttenUs OBJECT-TYPE SYNTAX Unsigned32 UNITS "0.1 dB" MAX-ACCESS read-only STATUS current DESCRIPTION "The measured difference in the total power transmitted by the xTU-R and the total power received by the xTU-C over all sub- carriers during diagnostics mode and initialization. It ranges from 0 to 1270 units of 0.1 dB (Physical values are 0 to 127 dB). A value of all 1's indicates the line attenuation is out of range to be represented. The invalid value is 4294967295. If data on the port is invalid or no data is generated on the port because the port has not been activated, the invalid value will be returned. Unit: 0.1 dB " REFERENCE "ITU-T G.997.1, paragraph 7.5.1.7" ::= { vdsl2LineEntry 15 } vdsl2LineStatusSigAttenDs OBJECT-TYPE SYNTAX Unsigned32 UNITS "0.1 dB" MAX-ACCESS read-only STATUS current DESCRIPTION "The measured difference in the total power transmitted by the xTU-C and the total power received by the xTU-R over all sub- carriers during Showtime. It ranges from 0 to 1270 units of 0.1 dB (Physical values are 0 to 127 dB). A value of all 1's indicates the line attenuation is out of range to be represented. The invalid value is 4294967295. If data on the port is invalid or no data is generated on the port because the port has not been activated, the invalid value will be returned. Unit: 0.1 dB " REFERENCE "ITU-T G.997.1, paragraph 7.5.1.8" ::= { vdsl2LineEntry 16 } vdsl2LineStatusSigAttenUs OBJECT-TYPE SYNTAX Unsigned32 UNITS "0.1 dB" MAX-ACCESS read-only STATUS current DESCRIPTION "The measured difference in the total power transmitted by the xTU-R and the total power received by the xTU-C over all sub- carriers during Showtime. It ranges from 0 to 1270 units of 0.1 dB (Physical values are 0 to 127 dB). A value of all 1's indicates the line attenuation is out of range to be represented. The invalid value is 4294967295. If data on the port is invalid or no data is generated on the port because the port has not been activated, the invalid value will be returned. Unit: 0.1 dB " REFERENCE "ITU-T G.997.1, paragraph 7.5.1.9" ::= { vdsl2LineEntry 17 } vdsl2LineStatusSnrMarginDs OBJECT-TYPE SYNTAX Integer32 UNITS "0.1 dB" MAX-ACCESS read-only STATUS current DESCRIPTION "Downstream SNR Margin is the maximum increase in dB of the noise power received at the xTU-R, such that the BER requirements are met for all downstream bearer channels. It ranges from -640 to 630 units of 0.1 dB (Physical values are -64 to 63 dB). A value of 0x7FFFFFFF(2147483647) indicates the line attenuation is out of range to be represented. The invalid value is 2147483647. If data on the port is invalid or no data is generated on the port because the port has not been activated, the invalid value will be returned. Unit: 0.1 dB " REFERENCE "ITU-T G.997.1, paragraph 7.5.1.10" ::= { vdsl2LineEntry 18 } vdsl2LineStatusSnrMarginUs OBJECT-TYPE SYNTAX Integer32 UNITS "0.1 dB" MAX-ACCESS read-only STATUS current DESCRIPTION "Upstream SNR Margin is the maximum increase in dB of the noise power received at the xTU-C, such that the BER requirements are met for all downstream bearer channels. It ranges from -640 to 630 units of 0.1 dB (Physical values are -64 to 63 dB). A value of 0x7FFFFFFF(2147483647) indicates the line attenuation is out of range to be represented. The invalid value is 2147483647. If data on the port is invalid or no data is generated on the port because the port has not been activated, the invalid value will be returned. Unit: 0.1 dB " REFERENCE "ITU-T G.997.1, paragraph 7.5.1.11" ::= { vdsl2LineEntry 19 } vdsl2LineStatusAttainableRateDs OBJECT-TYPE SYNTAX Unsigned32 UNITS "bits/second" MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum Attainable Data Rate Downstream. The maximum downstream net data rate currently attainable by the xTU-C transmitter and the xTU-R receiver, coded in bit/s. The invalid value is 4294967295. If data on the port is invalid or no data is generated on the port because the port has not been activated, the invalid value will be returned. Unit: bits/second " REFERENCE "ITU-T G.997.1, paragraph 7.5.1.12" ::= { vdsl2LineEntry 20 } vdsl2LineStatusAttainableRateUs OBJECT-TYPE SYNTAX Unsigned32 UNITS "bits/second" MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum Attainable Data Rate Upstream. The maximum upstream net data rate currently attainable by the xTU-R transmitter and the xTU-C receiver, coded in bit/s. The invalid value is 4294967295. If data on the port is invalid or no data is generated on the port because the port has not been activated, the invalid value will be returned. Unit: bits/second " REFERENCE "ITU-T G.997.1, paragraph 7.5.1.13" ::= { vdsl2LineEntry 21 } vdsl2LineStatusActPsdDs OBJECT-TYPE SYNTAX Integer32 UNITS "0.1 dB" MAX-ACCESS read-only STATUS current DESCRIPTION "Actual Power Spectrum Density (PSD) Downstream. The average downstream transmit PSD over the sub-carriers used for downstream. It ranges from -900 to 0 units of 0.1 dB (Physical values are -90 to 0 dBm/Hz). A value of 0x7FFFFFFF(2147483647) indicates the measurement is out of range to be represented. The invalid value is 2147483647. If data on the port is invalid or no data is generated on the port because the port has not been activated, the invalid value will be returned. Unit: 0.1 dB " REFERENCE "ITU-T G.997.1, paragraph 7.5.1.14" ::= { vdsl2LineEntry 22 } vdsl2LineStatusActPsdUs OBJECT-TYPE SYNTAX Integer32 UNITS "0.1 dB" MAX-ACCESS read-only STATUS current DESCRIPTION "Actual Power Spectrum Density (PSD) Upstream. The average upstream transmit PSD over the sub-carriers used for upstream. It ranges from -900 to 0 units of 0.1 dB (Physical values are -90 to 0 dBm/Hz). A value of 0x7FFFFFFF(2147483647) indicates the measurement is out of range to be represented. The invalid value is 2147483647. If data on the port is invalid or no data is generated on the port because the port has not been activated, the invalid value will be returned. Unit: 0.1 dB " REFERENCE "ITU-T G.997.1, paragraph 7.5.1.15" ::= { vdsl2LineEntry 23 } vdsl2LineStatusActAtpDs OBJECT-TYPE SYNTAX Integer32 UNITS "0.1 dB" MAX-ACCESS read-only STATUS current DESCRIPTION "Actual Aggregate Transmit Power Downstream. The total amount of transmit power delivered by the xTU-C at the U-C reference point, at the instant of measurement. It ranges from -310 to 310 units of 0.1 dB (Physical values are -31 to 31 dBm). A value of 0x7FFFFFFF(2147483647) indicates the measurement is out of range to be represented. The invalid value is 2147483647. If data on the port is invalid or no data is generated on the port because the port has not been activated, the invalid value will be returned. Unit: 0.1 dB " REFERENCE "ITU-T G.997.1, paragraph 7.5.1.16" ::= { vdsl2LineEntry 24 } vdsl2LineStatusActAtpUs OBJECT-TYPE SYNTAX Integer32 UNITS "0.1 dB" MAX-ACCESS read-only STATUS current DESCRIPTION "Actual Aggregate Transmit Power Upstream. The total amount of transmit power delivered by the xTU-R at the U-R reference point, at the instant of measurement. It ranges from -310 to 310 units of 0.1 dB (Physical values are -31 to 31 dBm). A value of 0x7FFFFFFF(2147483647) indicates the measurement is out of range to be represented. Unit: 0.1 dB " REFERENCE "ITU-T G.997.1, paragraph 7.5.1.17" ::= { vdsl2LineEntry 25 } vdsl2LineBandPlan OBJECT-TYPE SYNTAX Vdsl2BandPlan MAX-ACCESS read-only STATUS current DESCRIPTION "Band contains a series of subcarriers. The first octet is the number of bands. Other octets describe the info of each band. Each band info is a pair of values occupying 4 octets with the following structure: First octets - serial number of band Second octets - Direction of band Third fourth octets - Start index of band Fifth sixth octets - End index of band Huawei defined. " ::= { vdsl2LineEntry 26 } vdsl2LinePsdMaskClassSelection OBJECT-TYPE SYNTAX Vdsl2TIPsdClassMask MAX-ACCESS read-only STATUS current DESCRIPTION "The sub class of VDSL2 PSD Mask." REFERENCE "ITU-T G.997.1, paragraph 7.3.1.1.12" ::= { vdsl2LineEntry 27 } vdsl2LineCurrentVdsl2Profile OBJECT-TYPE SYNTAX Vdsl2SubProfiles MAX-ACCESS read-only STATUS current DESCRIPTION "This configuration parameter contains the G.993.2 profiles to be allowed by the near-end xTU on this line. " REFERENCE "ITU-T G.997.1, paragraph 7.3.1.1.11" ::= { vdsl2LineEntry 28 } vdsl2LineCnfgServiceProf OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this object identifies the row in the VDSL2 Line Configuration Service Profile Table, (vdsl2ServProfTable), which applies for this VDSL2 line. " DEFVAL { "DEFVAL" } ::= { vdsl2LineEntry 29 } vdsl2LineCnfgSpectrumProf OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this object identifies the row in the VDSL2 Line Configuration Spectrum Profile Table, (vdsl2SpectrumProfTable), which applies for this VDSL2 line. " DEFVAL { "DEFVAL" } ::= { vdsl2LineEntry 30 } vdsl2LineCnfgDpboProf OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this object identifies the row in the VDSL2 Line Configuration Dpbo Profile Table, (vdsl2DpboProfTable), which applies for this VDSL2 line. " DEFVAL { "DEFVAL" } ::= { vdsl2LineEntry 31 } vdsl2LineCnfgUpboProf OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this object identifies the row in the VDSL2 Line Configuration Upbo Profile Table, (vdsl2UpboProfTable), which applies for this VDSL2 line. " DEFVAL { "DEFVAL" } ::= { vdsl2LineEntry 32 } vdsl2LineCnfgNoiseMarginProf OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this object identifies the row in the VDSL2 Line Configuration Noise Margin Profile Table, (vdsl2NoiseMarginProfTable), which applies for this VDSL2 line. " DEFVAL { "DEFVAL" } ::= { vdsl2LineEntry 33 } vdsl2LineCnfgDelayINPProf OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this object identifies the row in the VDSL2 Line Configuration Delay-INP Profile Table, (vdsl2DelayInpProfTable), which applies for this VDSL2 line. " DEFVAL { "DEFVAL" } ::= { vdsl2LineEntry 34 } vdsl2UpboProfKl0CpeVal OBJECT-TYPE SYNTAX Unsigned32 UNITS "0.1dB" MAX-ACCESS read-only STATUS current DESCRIPTION "The actual value of KL0_CPE parameter,it ranges from 0 to 1280 units of 0.1 dB. The invalid value is 4294967295. If data on the port cannot be queried, data on the port is invalid, or no data is generated on the port because the port has not been activated, the invalid value will be returned. Unit: 0.1dB " ::= { vdsl2LineEntry 35 } vdsl2LineStatusCodingGainDs OBJECT-TYPE SYNTAX Unsigned32 UNITS "0.5dB" MAX-ACCESS read-only STATUS current DESCRIPTION "The actual value of Coding gain downstream parameter,it ranges from 0 to 16 units of 0.5 dB. The invalid value is 4294967295. If data on the port cannot be queried, data on the port is invalid, or no data is generated on the port because the port has not been activated, the invalid value will be returned. Unit: 0.5dB " ::= { vdsl2LineEntry 36 } vdsl2LineStatusCodingGainUs OBJECT-TYPE SYNTAX Unsigned32 UNITS "0.5dB" MAX-ACCESS read-only STATUS current DESCRIPTION "The actual value of Coding gain upstream parameter,it ranges from 0 to 16 units of 0.5 dB. The invalid value is 4294967295. If data on the port cannot be queried, data on the port is invalid, or no data is generated on the port because the port has not been activated, the invalid value will be returned. Unit: 0.5dB " ::= { vdsl2LineEntry 37 } vdsl2LineStatusPcbDs OBJECT-TYPE SYNTAX Unsigned32 UNITS "1dB" MAX-ACCESS read-only STATUS current DESCRIPTION "The actual value of power cut back downstream parameter, it ranges from 0 to 40 units of 1 dB. The invalid value is 4294967295. If data on the port cannot be queried, data on the port is invalid, or no data is generated on the port because the port has not been activated, the invalid value will be returned. Unit: 1dB " ::= { vdsl2LineEntry 38 } hwvdslDlmDsmprofile OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this object identifies the row in the DLM/DSM Profile Table, which applies for this VDSL2 line. " ::= { vdsl2LineEntry 39 } hwvdsl2LineActmode OBJECT-TYPE SYNTAX Vdsl2Actmode MAX-ACCESS read-only STATUS current DESCRIPTION "Actived mode after training between co and cpe. Options: 1. ADSL(1) - ETSI,T1.413 G992.1,G992.2 2. ADSL2(2) - G992.3,G992.4 3. ADSL2PLUS(3) - G992.5 4. VDSL(4) - G993.1 5. VDSL2(5) - G993.2,G993.5 6. invalidValue(-1) - Invalid value " ::= { vdsl2LineEntry 40 } vdsl2UpboProfKl0CoVal OBJECT-TYPE SYNTAX Unsigned32 UNITS "0.1dB" MAX-ACCESS read-only STATUS current DESCRIPTION "The actual value of KL0_CO parameter, it ranges from 0 to 1280 units of 0.1 dB. The invalid value is 4294967295. If data on the port cannot be queried, data on the port is invalid, or no data is generated on the port because the port has not been activated, the invalid value will be returned. Unit: 0.1dB " ::= { vdsl2LineEntry 41 } vdsl2LineStatusRtxUsedDs OBJECT-TYPE SYNTAX Vdsl2StatusRtxUsed MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter specifies whether G.998.4 retransmission is used in downstream. Options: 1. rtxInuse(1) - RTX in use 2. rtxUnusedModeForbidden(2) - RTX not in use, due to RTX_MODE = FORBIDDEN 3. rtxUnusedNotSupportedXtuc(3) - RTX not in use, due to not supported by the XTU-C 4. rtxUnusedNotSupportedXtur(4) - RTX not in use, due to not supported by the XTU-R 5. rtxUnusedNotSupportedXtucAndXtur(5) - RTX not in use, due to not supported by the XTU-C and XTU-R 6. invalidValue(-1) - Invalid value " REFERENCE "ITU-T G.997.1, paragraph 7.5.1.38" ::= { vdsl2LineEntry 42 } vdsl2LineStatusRtxUsedUs OBJECT-TYPE SYNTAX Vdsl2StatusRtxUsed MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter specifies whether G.998.4 retransmission is used in upstream. Options: 1. rtxInuse(1) - RTX in use 2. rtxUnusedModeForbidden(2) - RTX not in use, due to RTX_MODE = FORBIDDEN 3. rtxUnusedNotSupportedXtuc(3) - RTX not in use, due to not supported by the XTU-C 4. rtxUnusedNotSupportedXtur(4) - RTX not in use, due to not supported by the XTU-R 5. rtxUnusedNotSupportedXtucAndXtur(5) - RTX not in use, due to not supported by the XTU-C and XTU-R 6. invalidValue(-1) - Invalid value " REFERENCE "ITU-T G.997.1, paragraph 7.5.1.38" ::= { vdsl2LineEntry 43 } vdsl2LineStatusLastRetrainInfo OBJECT-TYPE SYNTAX INTEGER { none(1), cpe-l3-trigger(2), lom-us-trigger-dra(3), lom-ds-trigger-dra(4), cpe-never-answer-oam(5), cpe-no-more-answer-oam(6), persistent-ncd-us(7), persistent-ncd-ds(8), persistent-lcd-us(9), persistent-lcd-ds(10), l2-problem-co-drop(11), l2-problem-cpe-drop(12), bitswap-refused-us-co-drop(13), bitswap-refused-us-cpe-drop(14), channel-change-us-co-drop(15), channel-change-us-cpe-drop(16), noise-increase-us-co-drop(17), noise-increase-us-cpe-drop(18), bitswap-refused-ds-co-drop(19), bitswap-refused-ds-cpe-drop(20), channel-change-ds-co-drop(21), channel-change-ds-cpe-drop(22), noise-increase-ds-co-drop(23), noise-increase-ds-cpe-drop(24), lom-us-co-drop(25), lom-us-cpe-drop(26), lom-ds-co-drop(27), lom-ds-cpe-drop(28), sra-problem-us-co-drop(29), sra-problem-us-cpe-drop(30), sra-failed-us-co-drop(31), sra-failed-us-cpe-drop(32), sra-problem-ds-co-drop(33), sra-problem-ds-cpe-drop(34), sra-rejected-ds-co-drop(35), sra-rejected-ds-cpe-drop(36), bitswap-problem-us-co-drop(37), bitswap-problem-us-cpe-drop(38), bitswap-failed-us-co-drop(39), bitswap-failed-us-cpe-drop(40), bitswap-problem-ds-co-drop(41), bitswap-problem-ds-cpe-drop(42), bitswap-rejected-ds-co-drop(43), bitswap-rejected-ds-cpe-drop(44), cpe-switched-off(45), cpe-lost(46), co-reset(47), co-stop(48), unknown(49) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the last retrained information performed on the line. Options: 1. none(1) - No record is available 2. cpe-l3-trigger(2) - The terminal initiates a low power consumption L3 request 3. lom-us-trigger-dra(3) - The upstream noise margin is smaller than the minimum noise margin in rate dynamic adjustment 4. lom-ds-trigger-dra(4) - The downstream noise margin is smaller than the minimum noise margin in rate dynamic adjustment 5. cpe-never-answer-oam(5) - No OAM response is received from the CPE all the time 6. cpe-no-more-answer-oam(6) - No OAM response is received from the CPE 7. persistent-ncd-us(7) - Upstream continuous no cell delineation 8. persistent-ncd-ds(8) - Downstream continuous no cell delineation 9. persistent-lcd-us(9) - Upstream continuous loss of cell delineation 10.persistent-lcd-ds(10) - Downstream continuous loss of cell delineation 11.l2-problem-co-drop(11) - The CO is faulty during the switching from L0 to L2 12.l2-problem-cpe-drop(12) - The CPE is faulty during the switching from L0 to L2 13.bitswap-refused-us-co-drop(13) - The CO goes offline when the upstream bit swap fault occurs 10 times consecutively 14.bitswap-refused-us-cpe-drop(14) - The CPE goes offline when the downstream bit swap fault occurs 10 times consecutively 15.channel-change-us-co-drop(15) - The CO goes offline when the upstream net rate changes 16.channel-change-us-cpe-drop(16) - The CPE goes offline when the upstream net rate changes 17.noise-increase-us-co-drop(17) - The CO goes offline when the upstream noise increases 18.noise-increase-us-cpe-drop(18) - The CPE goes offline when the upstream noise increases 19.bitswap-refused-ds-co-drop(19) - The CO goes offline when the downstream bit swap fault occurs 10 times consecutively 20.bitswap-refused-ds-cpe-drop(20) - The CPE goes offline when the downstream bit swap fault occurs 10 times consecutively 21.channel-change-ds-co-drop(21) - The CO goes offline when the downstream net rate changes 22.channel-change-ds-cpe-drop(22) - The CPE goes offline when the downstream net rate changes 23.noise-increase-ds-co-drop(23) - The CO goes offline when the downstream noise increases 24.noise-increase-ds-cpe-drop(24) - The CPE goes offline when the downstream noise increases 25.lom-us-co-drop(25) - The CO goes offline when the upstream noise margin is smaller than the minimum noise margin 26.lom-us-cpe-drop(26) - The CPE goes offline when the upstream noise margin is smaller than the minimum noise margin 27.lom-ds-co-drop(27) - The CO goes offline when the downstream noise margin is smaller than the minimum noise margin 28.lom-ds-cpe-drop(28) - The CPE goes offline when the downstream noise margin is smaller than the minimum noise margin 29.sra-problem-us-co-drop(29) - The CO goes offline when the upstream SRA is faulty 30.sra-problem-us-cpe-drop(30) - The CPE goes offline when the upstream SRA is faulty 31.sra-failed-us-co-drop(31) - The CO goes offline when the upstream SRA fails 32.sra-failed-us-cpe-drop(32) - The CPE goes offline when the upstream SRA fails 33.sra-problem-ds-co-drop(33) - The CO goes offline when the downstream SRA is fault 34.sra-problem-ds-cpe-drop(34) - The CPE goes offline when the downstream SRA is faulty 35.sra-rejected-ds-co-drop(35) - The CO goes offline when the downstream SRA is rejected 36.sra-rejected-ds-cpe-drop(36) - The CPE goes offline when the downstream SRA is rejected 37.bitswap-problem-us-co-drop(37) - The CO goes offline when the upstream bit swap is faulty 38.bitswap-problem-us-cpe-drop(38) - The CPE goes offline when the upstream bit swap is faulty 39.bitswap-failed-us-co-drop(39) - The CO goes offline when the upstream bit swap fails 40.bitswap-failed-us-cpe-drop(40) - The CPE goes offline when the upstream bit swap fails 41.bitswap-problem-ds-co-drop(41) - The CO goes offline when the downstream bit swap is faulty 42.bitswap-problem-ds-cpe-drop(42) - The CPE goes offline when the downstream bit swap is faulty 43.bitswap-rejected-ds-co-drop(43) - The CO goes offline when the downstream bit swap is rejected 44.bitswap-rejected-ds-cpe-drop(44) - The CPE goes offline when the downstream bit swap is rejected 45.cpe-switched-off(45) - The CPE power supply is shut down 46.cpe-lost(46) - The CPE is disconnected 47.co-reset(47) - The CO resets the chipset or line 48.co-stop(48) - The CO actively deactivate the port 49.unknown(49) - Unknown reason " ::= { vdsl2LineEntry 44 } vdsl2UpboRxThreshDs OBJECT-TYPE SYNTAX Integer32 UNITS "dB" MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter reports the downstream received signal level threshold value used in the Alternative Electrical Length Estimation method (ELE-M1). This parameter represents an offset from -100 dB, and ranges from -64 dB to 0 dB in steps of 1 dB. The invalid value is 2147483647. If data on the port cannot be queried, data on the port is invalid, or no data is generated on the port because the port has not been activated, the invalid value will be returned. Unit: dB " REFERENCE "ITU-T G.997.1, paragraph 7.5.1.23.5" ::= { vdsl2LineEntry 45 } vdsl2UpboRxThreshUs OBJECT-TYPE SYNTAX Integer32 UNITS "dB" MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter reports the upstream received signal level threshold value used in the Alternative Electrical Length Estimation method (ELE-M1). This parameter represents an offset from -100 dB, and ranges from -64 dB to 0 dB in steps of 1 dB. The invalid value is 2147483647. If data on the port cannot be queried, data on the port is invalid, or no data is generated on the port because the port has not been activated, the invalid value will be returned. Unit: dB " REFERENCE "ITU-T G.997.1, paragraph 7.5.1.23.6" ::= { vdsl2LineEntry 46 } hwvdsl2LineStatusLineRateDs OBJECT-TYPE SYNTAX Unsigned32 UNITS "bits/second" MAX-ACCESS read-only STATUS current DESCRIPTION "The actual line rate downstream. The invalid value is 4294967295. If data on the port cannot be queried, data on the port is invalid, or no data is generated on the port because the port has not been activated, the invalid value will be returned. Unit: bits/second " ::= { vdsl2LineEntry 47 } hwvdsl2LineStatusLineRateUs OBJECT-TYPE SYNTAX Unsigned32 UNITS "bits/second" MAX-ACCESS read-only STATUS current DESCRIPTION "The actual line rate upstream. The invalid value is 4294967295. If data on the port cannot be queried, data on the port is invalid, or no data is generated on the port because the port has not been activated, the invalid value will be returned. Unit: bits/second " ::= { vdsl2LineEntry 48 } hwvdsl2LineSplitterMode OBJECT-TYPE SYNTAX INTEGER {connect(1), bypass(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter indicates which mode will be applied to the port splitter .The valid values for the splitter mode are 1 and 2. Options: 1. connect (1) - Splitter mode is connect 2. bypass (2) - Splitter mode is bypass " DEFVAL { bypass } ::= { vdsl2LineEntry 49 } hwvdsl2LineBackup OBJECT-TYPE SYNTAX INTEGER {enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter indicates whether the port backup is enabled. Options: 1. enable(1) - Enable the port backup. 2. disable(2) - Disable the port backup. " DEFVAL { disable } ::= { vdsl2LineEntry 50 } hwvdsl2LineBackupPort OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter indicates the backup port ifindex. If data on the port is invalid or no data is generated on the port, the port is not backed up. The invalid value is 4294967295. " ::= { vdsl2LineEntry 51 } hwvdsl2LinePhyRcontrol OBJECT-TYPE SYNTAX INTEGER { enable (1), disable (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter indicates whether the PHY-R retransmission is enabling. In TR165 mode, the H80BVDPM board should be enabled when it works as ADSL mode. Options: 1. enable(1) - Enable the PHY-R retransmission of VDSL2 line. 2. disable(2) - Disable the PHY-R retransmission of VDSL2 line. " DEFVAL { disable } ::= { vdsl2LineEntry 52 } hwvdsl2LineStatusActPsdLimitMask OBJECT-TYPE SYNTAX INTEGER { annexA998-D-32 (1), annexA998-D-64 (2), annexB997-M1c-A-7 (3), annexB997-M1x-M-8 (4), annexB997-M1x-M (5), annexB997-M2x-M-8 (6), annexB997-M2x-A (7), annexB997-M2x-M (8), annexB998-M1x-A (9), annexB998-M1x-B (10), annexB998-M1x-NUS0 (11), annexB998-M2x-A (12), annexB998-M2x-M (13), annexB998-M2x-B (14), annexB998-M2x-NUS0 (15), annexBHPE17-M1-NUS0 (16), annexBHPE30-M1-NUS0 (17), annexB997E17-M2x-A (18), annexB997E30-M2x-NUS0 (19), annexB998E17-M2x-NUS0 (20), annexB998E17-M2x-NUS0-M (21), annexB998ADE17-M2x-NUS0-M (22), annexB998ADE17-M2x-B (23), annexB998E30-M2x-NUS0 (24), annexB998E30-M2x-NUS0-M (25), annexB998ADE30-M2x-NUS0-M (26), annexB998ADE17-M2x-A (27), annexB998ADE30-M2x-NUS0-A (28), annexA998-D-48 (29), annexA998-D-128 (30), annexB998ADE17-M2x-M (31), annexB998E17-M2x-A (32), invalidValue (-1) } MAX-ACCESS read-only STATUS current DESCRIPTION "(LIMITMASK). This parameter contains the actual G.993.2 limit PSD masks selected during showtime. Options: 1. annexA998-D-32(1) - D-32 2. annexA998-D-64(2) - D-64 3. annexB997-M1c-A-7(3) - B7-1 4. annexB997-M1x-M-8(4) - B7-2 5. annexB997-M1x-M(5) - B7-3 6. annexB997-M2x-M-8(6) - B7-4 7. annexB997-M2x-A(7) - B7-5 8. annexB997-M2x-M(8) - B7-6 9. annexB998-M1x-A(9) - B8-1 10.annexB998-M1x-B(10) - B8-2 11.annexB998-M1x-NUS0(11) - B8-3 12.annexB998-M2x-A(12) - B8-4 13.annexB998-M2x-M(13) - B8-5 14.annexB998-M2x-B(14) - B8-6 15.annexB998-M2x-NUS0(15) - B8-7 16.annexBHPE17-M1-NUS0(16) - B7-7 17.annexBHPE30-M1-NUS0(17) - B7-8 18.annexB997E17-M2x-A(18) - B7-9 19.annexB997E30-M2x-NUS0(19) - B7-10 20.annexB998E17-M2x-NUS0(20) - B8-8 21.annexB998E17-M2x-NUS0-M(21) - B8-9 22.annexB998ADE17-M2x-NUS0-M(22) - B8-10 23.annexB998ADE17-M2x-B(23) - B8-12 24.annexB998E30-M2x-NUS0(24) - B8-13 25.annexB998E30-M2x-NUS0-M(25) - B8-14 26.annexB998ADE30-M2x-NUS0-M(26) - B8-15 27.annexB998ADE17-M2x-A(27) - B8-11 28.annexB998ADE30-M2x-NUS0-A(28) - B8-16 29.annexA998-D-48(29) - D-48 30.annexA998-D-128(30) - D-128 31.annexB998ADE17-M2x-M(31) - B8-17 32.annexB998E17-M2x-A(32) - B8-18 33.invalidValue(-1) - Invalid value " REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.16" ::= { vdsl2LineEntry 53 } -- vdsl2ChannelStatusTable vdsl2ChannelStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF Vdsl2ChannelStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table vdsl2ChannelStatusTable contains status parameters of VDSL2 channel. The indexes of this table are ifIndex and vdsl2ChStatusUnit. " ::= { vdsl2Status 1 } vdsl2ChannelStatusEntry OBJECT-TYPE SYNTAX Vdsl2ChannelStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table vdsl2ChannelStatusTable contains status parameters of VDSL2 channel. The indexes of this entry are ifIndex and vdsl2ChStatusUnit. " INDEX { ifIndex, vdsl2ChStatusUnit } ::= { vdsl2ChannelStatusTable 1 } Vdsl2ChannelStatusEntry ::= SEQUENCE { vdsl2ChStatusUnit Vdsl2Unit, vdsl2ChStatusChannelNum Unsigned32, vdsl2ChStatusActDataRate Unsigned32, vdsl2ChStatusPrevDataRate Unsigned32, vdsl2ChStatusActDelay Unsigned32, vdsl2ChStatusAtmStatus Vdsl2ChAtmStatus, vdsl2ChStatusPtmStatus Vdsl2ChPtmStatus, vdsl2ChStatusINP Unsigned32, vdsl2ChStatusRSRedundancy Unsigned32, vdsl2ChStatusRSSymbols Unsigned32, vdsl2ChStatusInterDepth Unsigned32, vdsl2ChStatusSymbolLength Unsigned32, vdsl2ChStatusRSSize Unsigned32, vdsl2ChStatusInterBlockLength Unsigned32, vdsl2ChStatusLPATH Unsigned32, vdsl2ChStatusPhyRrrcBits Unsigned32, vdsl2ChStatusPhyRtxQueue Unsigned32, vdsl2ChStatusActNetDataRate Unsigned32, vdsl2ChStatusActINPAgainstREIN Unsigned32, hwvdsl2ChStatusUnlimitedVersionEtru Unsigned32 } vdsl2ChStatusUnit OBJECT-TYPE SYNTAX Vdsl2Unit MAX-ACCESS not-accessible STATUS current DESCRIPTION "The termination unit xTU-C(1) or xTU-R(2)." ::= { vdsl2ChannelStatusEntry 1 } vdsl2ChStatusChannelNum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Provides the bearer channel number associated with this row (i.e., the channel ifIndex). This enables determining the channel configuration profile and the channel thresholds profile applicable for this bearer channel. " ::= { vdsl2ChannelStatusEntry 2 } vdsl2ChStatusActDataRate OBJECT-TYPE SYNTAX Unsigned32(0..200000000) UNITS "bits/second" MAX-ACCESS read-only STATUS current DESCRIPTION "If retransmission is not used in a given transmit direction, this parameter reports the actual net data rate at which the bearer channel is operating in L0 power management state, and in L1 or L2 states, the parameter contains the net data rate in the previous L0 state. If retransmission is used in a given transmit direction, this parameter reports the Expected Throughput(ETR) at which the bearer channel is operating in L0 power management state, and in L1 or L2 states, the parameter contains the Expected Throughput(ETR) in the previous L0 state. The data rate is coded in steps of 1000 bit/s. The invalid value is 4294967295. If data on the port is invalid or no data is generated on the port because the port has not been activated, the invalid value will be returned. Unit: bits/second " REFERENCE "ITU-T G.997.1, paragraph 7.5.2.1" ::= { vdsl2ChannelStatusEntry 3 } vdsl2ChStatusPrevDataRate OBJECT-TYPE SYNTAX Unsigned32(0..200000000) UNITS "bits/second" MAX-ACCESS read-only STATUS current DESCRIPTION "If retransmission is not used in a given transmit direction, this parameter reports the previous net data rate the bearer channel was operating at just before the latest net data rate change event occurred, excluding all transitions between L0 state and L1 or L2 states. If retransmission is used in a given transmit direction, this parameter reports the previous Expected Throughput(ETR) (as defined in G.998.4) the bearer channel was operating at just before the latest ETR change event occurred, excluding all transitions between L0 state and L1 or L2 states. The data rate is coded in steps of 1000 bit/s. The invalid value is 4294967295. If data on the port is invalid or no data is generated on the port because the port has not been activated, the invalid value will be returned. Unit: bits/second " REFERENCE "ITU-T G.997.1, paragraph 7.5.2.2" ::= { vdsl2ChannelStatusEntry 4 } vdsl2ChStatusActDelay OBJECT-TYPE SYNTAX Unsigned32(0..8176) UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "If retransmission is not used in a given transmit direction, this parameter is the actual one-way interleaving delay introduced by the PMS-TC excluding delay in L1 and L2 state. In L1 and L2 state, the parameter contains the interleaving delay in the previous L0 state. If retransmission is used in a given transmit direction, this parameter specifies the actual value of the time-independent component of the delay due to retransmission only. It is coded in ms (rounded to the nearest ms). The invalid value is 4294967295. If data on the port is invalid or no data is generated on the port because the port has not been activated, the invalid value will be returned. Unit: milliseconds " REFERENCE "ITU-T G.997.1, paragraph 7.5.2.3" ::= { vdsl2ChannelStatusEntry 5 } vdsl2ChStatusAtmStatus OBJECT-TYPE SYNTAX Vdsl2ChAtmStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates current state (existing failures) of the VDSL channel in case its Data Path is ATM. This is a bit-map of possible conditions. Options: 1. noDefect(0) - This bit position positively reports that no defect or failure exist 2. noCellDelineation(1) - The link was successfully initialized but cell delineation was never acquired on the associated ATM data path 3. lossOfCellDelineation(2) - Loss of cell delineation on the associated ATM data path In case the channel is not of ATM Data Path, the object is set to '0'. " REFERENCE "ITU-T G.997.1, paragraph 7.1.4" ::= { vdsl2ChannelStatusEntry 6 } vdsl2ChStatusPtmStatus OBJECT-TYPE SYNTAX Vdsl2ChPtmStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates current state (existing failures) of the VDSL channel in case its Data Path is PTM. This is a bit-map of possible conditions. Options: 1. noFailure(0) - No failure 2. outOfSync (1) - Out of synchronization In case the channel is not of PTM Data Path the object is set to '0'. " REFERENCE "ITU-T G.997.1, paragraph 7.1.5" ::= { vdsl2ChannelStatusEntry 7 } vdsl2ChStatusINP OBJECT-TYPE SYNTAX Unsigned32(0..254) UNITS "0.1 DMT symbol" MAX-ACCESS read-only STATUS current DESCRIPTION "If retransmission is not used in a given transmit direction, this parameter reports the actual impulse noise protection (INP) on the bearer channel in the L0 state. In the L1 or L2 state, the parameter contains the INP in the previous L0 state. If retransmission is used in a given transmit direction, this parameter reports the actual impulse noise protection (INP) against SHINE on the bearer channel in the L0 state. In the L2 state, the parameter contains the INP in the previous L0 state. The value is coded in fractions of DMT symbols with a granularity of 0.1 symbols. The invalid value is 4294967295. If data on the port is invalid or no data is generated on the port because the port has not been activated, the invalid value will be returned. Unit: 0.1 DMT symbol " REFERENCE "ITU-T G.997.1(200604), paragraph 7.5.2.4" ::= { vdsl2ChannelStatusEntry 8 } vdsl2ChStatusRSRedundancy OBJECT-TYPE SYNTAX Unsigned32(0..16) UNITS "byte" MAX-ACCESS read-only STATUS current DESCRIPTION "The actual number of Reed-Solomon redundancy bytes per codeword used in the latency path in which the bearer channel is transported. The value is coded in bytes. The value 0 indicates no Reed-Solomon coding. The invalid value is 4294967295. If data on the port is invalid or no data is generated on the port because the port has not been activated, the invalid value will be returned. Unit: byte " REFERENCE "ITU-T G.997.1(200604), paragraph 7.5.2.6.2" ::= { vdsl2ChannelStatusEntry 9 } vdsl2ChStatusRSSymbols OBJECT-TYPE SYNTAX Unsigned32 UNITS "0.01 DMT symbol" MAX-ACCESS read-only STATUS current DESCRIPTION "The DMT Symbol number per codeword used in the latency path in which the bearer channel is transported. The invalid value is 4294967295. If data on the port is invalid or no data is generated on the port because the port has not been activated, the invalid value will be returned. Unit: 0.01 DMT symbol " REFERENCE "ITU-T G.997.1, paragraph 7.5.2.3" ::= { vdsl2ChannelStatusEntry 10 } vdsl2ChStatusInterDepth OBJECT-TYPE SYNTAX Unsigned32(1..4096) MAX-ACCESS read-only STATUS current DESCRIPTION "The actual Reed-Solomon codeword size used in the latency path in which the bearer channel is transported. The value ranges from 1 to 4096 by step of 1. The value 1 indicates no interleaving. The invalid value is 4294967295. If data on the port is invalid or no data is generated on the port because the port has not been activated, the invalid value will be returned. " REFERENCE "ITU-T G.997.1(200604), paragraph 7.5.2.6.4" ::= { vdsl2ChannelStatusEntry 11 } vdsl2ChStatusSymbolLength OBJECT-TYPE SYNTAX Unsigned32(0..65535) UNITS "bit" MAX-ACCESS read-only STATUS current DESCRIPTION "The actual number of bits per symbol assigned to the latency path in which the bearer channel is transported. This value does not include trellis overhead. The invalid value is 4294967295. If data on the port is invalid or no data is generated on the port because the port has not been activated, the invalid value will be returned. Unit: bit " REFERENCE "ITU-T G.997.1(200604), paragraph 7.5.2.6.3" ::= { vdsl2ChannelStatusEntry 12 } vdsl2ChStatusRSSize OBJECT-TYPE SYNTAX Unsigned32(0..255) UNITS "byte" MAX-ACCESS read-only STATUS current DESCRIPTION "The actual Reed-Solomon codeword size used in the latency path in which the bearer channel is transported. The invalid value is 4294967295. If data on the port is invalid or no data is generated on the port because the port has not been activated, the invalid value will be returned. Unit: byte " REFERENCE "ITU-T G.997.1(200604), paragraph 7.5.2.6.1" ::= { vdsl2ChannelStatusEntry 13 } vdsl2ChStatusInterBlockLength OBJECT-TYPE SYNTAX Unsigned32(4..255) UNITS "byte" MAX-ACCESS read-only STATUS current DESCRIPTION "The actual block length of the interleaver used in the latency path in which the bearer channel is transported. The invalid value is 4294967295. If data on the port is invalid or no data is generated on the port because the port has not been activated, the invalid value will be returned. Unit: byte " REFERENCE "ITU-T G.997.1(200604), paragraph 7.5.2.6.5" ::= { vdsl2ChannelStatusEntry 14 } vdsl2ChStatusLPATH OBJECT-TYPE SYNTAX Unsigned32(0..3) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the actual latency path in which the bearer is transported. The invalid value is 4294967295. If data on the port is invalid or no data is generated on the port because the port has not been activated, the invalid value will be returned. " REFERENCE "ITU-T G.997.1, paragraph 7.5.2.7" ::= { vdsl2ChannelStatusEntry 15 } vdsl2ChStatusPhyRrrcBits OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The bits in the channel that used to retransmission. The invalid value is 4294967295. If data on the port cannot be queried, data on the port is invalid, or no data is generated on the port because the port has not been activated, the invalid value will be returned. " ::= { vdsl2ChannelStatusEntry 16 } vdsl2ChStatusPhyRtxQueue OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Queues in send buffer used for retransmission. The invalid value is 4294967295. If data on the port cannot be queried, data on the port is invalid, or no data is generated on the port because the port has not been activated, the invalid value will be returned. " ::= { vdsl2ChannelStatusEntry 17 } vdsl2ChStatusActNetDataRate OBJECT-TYPE SYNTAX Unsigned32 UNITS "bits/second" MAX-ACCESS read-only STATUS current DESCRIPTION "In L0 state, this parameter reports the Net Data Rate at which the bearer channel is operating. In L2 state, this parameter contains the Net Data Rate in the previous L0 state. This parameter is optional if G.998.4 retransmission function is not supported. The data rate is coded in steps of 1000 bit/s. The invalid value is 4294967295. If data on the port cannot be queried, data on the port is invalid, or no data is generated on the port because the port has not been activated, the invalid value will be returned. " REFERENCE "ITU-T G.997.1, paragraph 7.5.2.8" ::= { vdsl2ChannelStatusEntry 18 } vdsl2ChStatusActINPAgainstREIN OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "If retransmission is used in a given transmit direction, this parameter reports the actual impulse noise protection (INP) against REIN (under specific conditions detailed in G.998.4) on the bearer channel in the L0 state. In the L2 state, the parameter contains the INP in the previous L0 state. The value is coded in fractions of DMT symbols with a granularity of 0.1 symbols. The invalid value is 4294967295. If data on the port cannot be queried, data on the port is invalid, or no data is generated on the port because the port has not been activated, the invalid value will be returned. " REFERENCE "ITU-T G.997.1, paragraph 7.5.2.9" ::= { vdsl2ChannelStatusEntry 19 } hwvdsl2ChStatusUnlimitedVersionEtru OBJECT-TYPE SYNTAX Unsigned32 UNITS "bits/second" MAX-ACCESS read-only STATUS current DESCRIPTION "The unlimited version of expected throughput in kbit/s:(1 - RTxOH) * NDR. This value is specified in G.998.4 (G.INP)." ::= { vdsl2ChannelStatusEntry 20 } -- vdsl2PrivSCStatusTable vdsl2PrivSCStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF Vdsl2PrivSCStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table vdsl2PrivSCStatusTable contains status parameters of VDSL2 sub-carriers. The indexes of this table are ifIndex and vdsl2PrivSCStatusDirection. " ::= { vdsl2Status 2 } vdsl2PrivSCStatusEntry OBJECT-TYPE SYNTAX Vdsl2PrivSCStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table vdsl2PrivSCStatusTable contains status parameters of VDSL2 sub-carriers. The indexes of this entry are ifIndex and vdsl2PrivSCStatusDirection. " INDEX { ifIndex, vdsl2PrivSCStatusDirection } ::= { vdsl2PrivSCStatusTable 1 } Vdsl2PrivSCStatusEntry ::= SEQUENCE { vdsl2PrivSCStatusDirection Vdsl2Direction, vdsl2PrivSCStatusMtime Unsigned32, vdsl2PrivSCStatusSnr OCTET STRING, vdsl2PrivSCStatusBitsAlloc OCTET STRING, vdsl2PrivSCStatusGainAlloc OCTET STRING } vdsl2PrivSCStatusDirection OBJECT-TYPE SYNTAX Vdsl2Direction MAX-ACCESS not-accessible STATUS current DESCRIPTION "The direction of the sub-carrier either upstream or downstream. " ::= { vdsl2PrivSCStatusEntry 1 } vdsl2PrivSCStatusMtime OBJECT-TYPE SYNTAX Unsigned32 UNITS "symbols" MAX-ACCESS read-only STATUS current DESCRIPTION "SNR Measurement Time. The number of symbols used to measure the SNR values on the respective transmission direction. It should correspond to the value specified in the recommendation (e.g., the number of symbols in 1 second time interval for G.992.3). This parameter corresponds to 1 second in loop diagnostic procedure and should be updated otherwise. Unit: symbols " REFERENCE "ITU-T G.997.1, paragraph 7.5.1.20.1 (SNRMTds) and paragraph 7.5.1.20.3 (SNRMTus)" ::= { vdsl2PrivSCStatusEntry 2 } vdsl2PrivSCStatusSnr OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..4096)) MAX-ACCESS read-only STATUS current DESCRIPTION "The SNR Margin per sub-carrier, expressing the ratio between the received signal power and received noise power per subscriber. It is an array of 4096 bytes, designed for supporting up to 4096 sub-carriers. The number of utilized octets on downstream direction depends on NSCds, and on upstream direction it depends on NSCus. This value is referred here as NSC. Byte i (0 <= i < NSC) is set to a value in the range 0 to 254 to indicate that the respective downstream or upstream sub- carrier i has SNR of: (-32 + Vdsl2SubcarrierSnr(i)/2) in dB (i.e., -32 to 95dB). The special value 255 means that no measurement could be done for the subcarrier because it is out of the PSD mask passband or that the noise PSD is out of range to be represented. Each value in this array is 8 bits wide. " REFERENCE "ITU-T G.997.1, paragraph 7.5.1.20.2 (SNRpsds) and paragraph 7.5.1.20.4 (SNRpsus)" ::= { vdsl2PrivSCStatusEntry 3 } vdsl2PrivSCStatusBitsAlloc OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..2048)) UNITS "bits" MAX-ACCESS read-only STATUS current DESCRIPTION "The bits allocation per sub-carrier. An array of 2048 bytes, designed for supporting up to 4096 sub-carriers. The number of utilized nibbles on downstream direction depends on NSCds, and on upstream direction it depends on NSCus. This value is referred here as NSC. Nibble i (0 <= i < NSC) is set to a value in the range 0 to 15 to indicate that the respective downstream or upstream sub-carrier i has the same amount of bits allocation. Unit: bits " REFERENCE "ITU-T G.997.1, paragraph 7.5.1.21.1 (BITSpsds) and paragraph 7.5.1.21.2 (BITSpsus)" ::= { vdsl2PrivSCStatusEntry 4 } vdsl2PrivSCStatusGainAlloc OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..8192)) MAX-ACCESS read-only STATUS current DESCRIPTION "The gain allocation per sub-carrier. An array of 8192 bytes, designed for supporting up to 4096 sub-carriers. The number of utilized octets on downstream direction depends on NSCds, and on upstream direction it depends on NSCus. This value is referred here as NSC. Value i (0 <= i < NSC) is in the range 0 to 4093 to indicate that the respective downstream or upstream sub-carrier i has the same amount of gain value. The gain value is represented as a multiple of 1/512 on linear scale. Each value in this array is 16 bits wide and is stored in big endian format. " REFERENCE "ITU-T G.997.1, paragraph 7.5.1.21.3 (GAINSpsds) and paragraph 7.5.1.21.4 (GAINSpsus)" ::= { vdsl2PrivSCStatusEntry 5 } -- Scalars that relate to the vdsl2Scalar. vdsl2ScalarSCMaxInterfaces OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This value determines the maximum number of interfaces supported by vdsl2SCStatusTable, vdsl2SCStatusBandTable, and vdsl2SCStatusSegmentTable. " ::= { vdsl2ScalarSC 1 } vdsl2ScalarSCAvailInterfaces OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This value determines the currently available number of interfaces listed in vdsl2SCStatusTable, vdsl2SCStatusBandTable, and vdsl2SCStatusSegmentTable. " ::= { vdsl2ScalarSC 2 } -- vdsl2SCStatusTable vdsl2SCStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF Vdsl2SCStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table vdsl2SCStatusTable contains sub-carrier status parameters for VDSL2/ADSL/ADSL2 and ADSL2+ that DO NOT refer to specific sub-carriers. In addition, the table contains parameters that provide information about the size of parameters in vdsl2SCStatusSegmentTable. This table contains live data from equipment. The indexes of this table are ifIndex and vdsl2SCStatusDirection. " ::= { vdsl2Status 3 } vdsl2SCStatusEntry OBJECT-TYPE SYNTAX Vdsl2SCStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table vdsl2SCStatusTable contains sub-carrier status parameters for VDSL2/ADSL/ADSL2 and ADSL2+ that DO NOT refer to specific sub-carriers. In addition, the table contains parameters that provide information about the size of parameters in vdsl2SCStatusSegmentTable. This table contains live data from equipment. The indexes of this entry are ifIndex and vdsl2SCStatusDirection. " INDEX { ifIndex, vdsl2SCStatusDirection } ::= { vdsl2SCStatusTable 1 } Vdsl2SCStatusEntry ::= SEQUENCE { vdsl2SCStatusDirection Vdsl2Direction, vdsl2SCStatusLinScale Unsigned32, vdsl2SCStatusLinScGroupSize Unsigned32, vdsl2SCStatusLogMt Unsigned32, vdsl2SCStatusLogScGroupSize Unsigned32, vdsl2SCStatusQlnMt Unsigned32, vdsl2SCStatusQlnScGroupSize Unsigned32, vdsl2SCStatusMtime Unsigned32, vdsl2SCStatusSnrScGroupSize Unsigned32, vdsl2SCStatusAttainableRate Unsigned32, vdsl2SCStatusActAtp Integer32, vdsl2SCStatusRowStatus RowStatus, vdsl2SCStatusProfile Vdsl2Profiles, vdsl2SCStatusClassmask Vdsl2PSDClassMask } vdsl2SCStatusDirection OBJECT-TYPE SYNTAX Vdsl2Direction MAX-ACCESS not-accessible STATUS current DESCRIPTION "The direction of the sub-carrier either upstream or downstream" ::= { vdsl2SCStatusEntry 1 } vdsl2SCStatusLinScale OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The scale factor to be applied to the H(f) linear representation values for the respective transmission direction. This parameter is only available after a loop diagnostic procedure. " REFERENCE "ITU-T G.997.1, paragraph #7.5.1.26.1 (HLINSCds) and paragraph #7.5.1.26.7 (HLINSCus)" ::= { vdsl2SCStatusEntry 2 } vdsl2SCStatusLinScGroupSize OBJECT-TYPE SYNTAX Unsigned32(1 | 2 | 4 | 8) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of sub-carriers per group used to report the H(f) linear representation values for the respective transmission direction. The valid values are 1, 2, 4 and 8. For ADSL, this parameter is equal to one and, for VDSL2, it is equal to the size of a sub-carrier group used to compute these parameters. This parameter is only available after a loop diagnostic procedure. " REFERENCE "ITU-T G.997.1, paragraph #7.5.1.26.2 (HLINGds) and paragraph #7.5.1.26.8 (HLINGus)" ::= { vdsl2SCStatusEntry 3 } vdsl2SCStatusLogMt OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of symbols used to measure the H(f) logarithmic measurement values for the respective transmission direction. This parameter should correspond to the value specified in the recommendation (e.g., the number of symbols in 1 second time interval for G.992.3). This parameter corresponds to 1 second in loop diagnostic procedure and should be updated in initialization. " REFERENCE "ITU-T G.997.1, paragraph #7.5.1.26.4 (HLOGMTds) and paragraph #7.5.1.26.10 (HLOGMTus)" ::= { vdsl2SCStatusEntry 4 } vdsl2SCStatusLogScGroupSize OBJECT-TYPE SYNTAX Unsigned32(1 | 2 | 4 | 8) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of sub-carriers per group used to report the H(f) logarithmic representation values for the respective transmission direction. The valid values are 1, 2, 4 and 8. For ADSL, this parameter is equal to one and, for VDSL2, it is equal to the size of a sub-carrier group used to compute these parameters. This parameter is only available after a loop diagnostic procedure. " REFERENCE "ITU-T G.997.1, paragraph #7.5.1.26.5 (HLOGGds) and paragraph #7.5.1.26.11 (HLOGGus)" ::= { vdsl2SCStatusEntry 5 } vdsl2SCStatusQlnMt OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of symbols used to measure the Quiet Line Noise values on the respective transmission direction. This parameter should correspond to the value specified in the recommendation (e.g., the number of symbols in 1 second time interval for G.992.3). This parameter corresponds to 1 second in loop diagnostic procedure and should be updated in initialization. " REFERENCE "ITU-T G.997.1, paragraph #7.5.1.27.1 (QLNMTds) and paragraph #7.5.1.27.4 (QLNMTus)" ::= { vdsl2SCStatusEntry 6 } vdsl2SCStatusQlnScGroupSize OBJECT-TYPE SYNTAX Unsigned32(1 | 2 | 4 | 8) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of sub-carriers per group used to report the Quiet Line Noise values for the respective transmission direction. The valid values are 1, 2, 4 and 8. For ADSL, this parameter is equal to one and, for VDSL2, it is equal to the size of a sub-carrier group used to compute these parameters. This parameter is only available after a loop diagnostic procedure. " REFERENCE "ITU-T G.997.1, paragraph #7.5.1.27.2 (QLNGds) and paragraph #7.5.1.27.5 (QLNGus)" ::= { vdsl2SCStatusEntry 7 } vdsl2SCStatusMtime OBJECT-TYPE SYNTAX Unsigned32 UNITS "symbols" MAX-ACCESS read-only STATUS current DESCRIPTION "SNR Measurement Time. The number of symbols used to measure the SNR values on the respective transmission direction. It should correspond to the value specified in the recommendation (e.g., the number of symbols in 1 second time interval for G.992.3). This parameter corresponds to 1 second in loop diagnostic procedure and should be updated otherwise. Unit: symbols " REFERENCE "ITU-T G.997.1, paragraph #7.5.1.28.1 (SNRMTds) and paragraph #7.5.1.28.4 (SNRMTus)" ::= { vdsl2SCStatusEntry 8 } vdsl2SCStatusSnrScGroupSize OBJECT-TYPE SYNTAX Unsigned32(1 | 2 | 4 | 8) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of sub-carriers per group used to report the SNR values on the respective transmission direction. The valid values are 1, 2, 4 and 8. For ADSL, this parameter is equal to one and, for VDSL2, it is equal to the size of a sub-carrier group used to compute these parameters. This parameter is only available after a loop diagnostic procedure. " REFERENCE "ITU-T G.997.1, paragraph #7.5.1.28.2 (QLNGds) and paragraph #7.5.1.28.5 (QLNGus)" ::= { vdsl2SCStatusEntry 9 } vdsl2SCStatusAttainableRate OBJECT-TYPE SYNTAX Unsigned32 UNITS "bits/second" MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum Attainable Data Rate. The maximum net data rate currently attainable by the XTU-C transmitter and XTU-R receiver (when referring to downstream direction) or by the XTU-R transmitter and XTU-C receiver (when referring to upstream direction). Value is coded in bits/s. This object reflects the value of the parameter following the most recent DELT performed on the associated line. Once the DELT process is over, the parameter no longer changes until the row is deleted or a new DELT process is initiated. Unit: bits/second " REFERENCE "ITU-T G.997.1, paragraph #7.5.1.12 (ATTNDRds) and paragraph #7.5.1.13 (ATTNDRus)" ::= { vdsl2SCStatusEntry 10 } vdsl2SCStatusActAtp OBJECT-TYPE SYNTAX Integer32 UNITS "0.1 dB" MAX-ACCESS read-only STATUS current DESCRIPTION "Actual Aggregate Transmit Power from the XTU (XTU-R on downstream direction and XTU-C on upstream direction), at the instant of measurement. It ranges from -310 to 310 units of 0.1 dB (Physical values are -31 to 31 dBm). A value of all 1's indicates the measurement is out of range to be represented. This object reflects the value of the parameter following the most recent DELT performed on the associated line. Once the DELT process is over, the parameter no longer changes until the row is deleted or a new DELT process is initiated. Unit: 0.1 dB " REFERENCE "ITU-T G.997.1, paragraph #7.5.1.16 (ACTATPds) and paragraph #7.5.1.17 (ACTATPus)" ::= { vdsl2SCStatusEntry 11 } vdsl2SCStatusRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Row Status. The SNMP agent should create rows in this table and in the vdsl2SCStatusTable for storing the results of a DELT performed on the associated line, if such rows do not already exist. The SNMP agent may have limited resources; therefore, if multiple rows co-exist in the table, it may fail to add new rows to the two tables or allocate memory resources for a new DELT process. If that occurs, the SNMP agent responds with either the value 'tableFull' or the value 'noResources' (for xdsl2LineCmndConfLdsfFailReason object in xdsl2LineTable) The management system (the operator) may delete rows according to any scheme. E.g., after retrieving the results. " ::= { vdsl2SCStatusEntry 12 } vdsl2SCStatusProfile OBJECT-TYPE SYNTAX Vdsl2Profiles MAX-ACCESS read-only STATUS current DESCRIPTION "This configuration parameter contains the G.993.2 profiles to be allowed by the near-end xTU on this line. " REFERENCE "ITU-T G.997.1(200604), paragraph 7.3.1.1.11" ::= { vdsl2SCStatusEntry 13 } vdsl2SCStatusClassmask OBJECT-TYPE SYNTAX Vdsl2PSDClassMask MAX-ACCESS read-only STATUS current DESCRIPTION "In order to reduce the number of configuration possibilities, the limit PSD masks are grouped in the following PSD mask classes: - Class 998 Annex A: D-32, D-64. - Class 997-M1c Annex B: 997-M1c-A-7. - Class 997-M1x Annex B: 997-M1x-M-8, 997-M1x-M. - Class 997-M2x Annex B: 997-M2x-M-8, 997-M2x-A, 997-M2x-M. - Class 998-M1x Annex B: 998-M1x-A, 998-M1x-B, 998-M1x-NUS0. - Class 998-M2x Annex B: 998-M2x-A, 998-M2x-M, 998-M2x-B, 998-M2x-NUS0. - Class HPE17 Annex B: HPE17-M1-NUS0. - Class HPE30 Annex B: HPE30-M1-NUS0. - Class 997E17-M2x Annex B: 997E17-M2x-NUS0. - Class 997E30-M2x Annex B: 997E30-M2x-NUS0. - Class 998E17-M2x Annex B: 998E17-M2x-NUS0, 998E17-M2x-NUS0-M, 998E17-M2x-A. - Class 998ADE17-M2x Annex B: 998ADE17-M2x-NUS0-M, 998ADE17-M2x-A, 998ADE17-M2x-B. - Class 998E30-M2x Annex B: 998E30-M2x-NUS0, 998E30-M2x-NUS0-M. - Class 998ADE30-M2x Annex B: 998ADE30-M2x-NUS0-M, 998ADE30-M2x-NUS0-A. " REFERENCE "ITU-T G.997.1(200604), paragraph 7.3.1.1.12" ::= { vdsl2SCStatusEntry 14 } -- vdsl2SCStatusBandTable vdsl2SCStatusBandTable OBJECT-TYPE SYNTAX SEQUENCE OF Vdsl2SCStatusBandEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table vdsl2SCStatusBandTable contains sub-carrier status parameters for VDSL2/ADSL/ADSL2 and ADSL2+ that are grouped per-band. For ADSL/ADSL2/ADSL2+, there is a single upstream band and a single downstream band. For VDSL2, there are several downstream bands and several upstream bands. The indexes of this table are ifIndex and vdsl2SCStatusBand. " ::= { vdsl2Status 4 } vdsl2SCStatusBandEntry OBJECT-TYPE SYNTAX Vdsl2SCStatusBandEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table vdsl2SCStatusBandTable contains sub-carrier status parameters for VDSL2/ADSL/ADSL2 and ADSL2+ that are grouped per-band. For ADSL/ADSL2/ADSL2+, there is a single upstream band and a single downstream band. For VDSL2, there are several downstream bands and several upstream bands. The indexes of this entry are ifIndex and vdsl2SCStatusBand. " INDEX { ifIndex, vdsl2SCStatusBand } ::= { vdsl2SCStatusBandTable 1 } Vdsl2SCStatusBandEntry ::= SEQUENCE { vdsl2SCStatusBand Xdsl2Band, vdsl2SCStatusBandLnAtten Unsigned32, vdsl2SCStatusBandSigAtten Unsigned32, vdsl2SCStatusBandSnrMargin Integer32, vdsl2SCStatusBandUpbokle Unsigned32 } vdsl2SCStatusBand OBJECT-TYPE SYNTAX Xdsl2Band MAX-ACCESS not-accessible STATUS current DESCRIPTION "The transmission band. Identifies a band in a VDSL2/ADSL/ADSL2/ADSL2+ link. For a band in the upstream direction, transmission is from the remote end (xTU-R) towards the central office end (xTU-C). A band in the upstream direction is indicated by upstream(1) for ADSL/ADSL2/ADSL2+ single band, or any of us0(3), us1(5), us2(7), us3(9), or us4(11) for VDSL2 multiple bands. For a band in the downstream direction, transmission is from the xTU-C towards the xTU-R. A band in the downstream direction is indicated by downstream(2) for ADSL/ADSL2/ADSL2+ single band, or any of ds1(4), ds2(6), ds3(8), or ds4(10) for VDSL2 multiple bands. " ::= { vdsl2SCStatusBandEntry 1 } vdsl2SCStatusBandLnAtten OBJECT-TYPE SYNTAX Unsigned32 (0..1270 | 2147483646 | 2147483647) UNITS "0.1 dB" MAX-ACCESS read-only STATUS current DESCRIPTION "When referring to a band in the downstream direction, it is the measured difference in the total power transmitted by the xTU-C and the total power received by the xTU-R over all sub-carriers during diagnostics mode. When referring to a band in the upstream direction, it is the measured difference in the total power transmitted by the xTU-R and the total power received by the xTU-C over all sub-carriers during diagnostics mode. It ranges from 0 to 1270 units of 0.1 dB (Physical values are 0 to 127 dB). A special value of 0x7FFFFFFF (2147483647) indicates the line attenuation is out of range to be represented. A special value of 0x7FFFFFFE (2147483646) indicates the line attenuation measurement is unavailable. This object reflects the value of the parameter following the most recent DELT performed on the associated line. Once the DELT process is over, the parameter no longer changes until the row is deleted or a new DELT process is initiated. Unit: 0.1 dB " REFERENCE "ITU-T G.997.1, paragraph #7.5.1.6 (LATNds) and paragraph #7.5.1.7 (LATNus)" ::= { vdsl2SCStatusBandEntry 2 } vdsl2SCStatusBandSigAtten OBJECT-TYPE SYNTAX Unsigned32 (0..1270 | 2147483646 | 2147483647) UNITS "0.1 dB" MAX-ACCESS read-only STATUS current DESCRIPTION "When referring to a band the downstream direction, it is the measured difference in the total power transmitted by the xTU-C and the total power received by the xTU-R over all sub carriers during Showtime after the diagnostics mode. When referring to the upstream direction, it is the measured difference in the total power transmitted by the xTU-R and the total power received by the xTU-C over all sub carriers during Showtime after the diagnostics mode. It ranges from 0 to 1270 units of 0.1 dB (Physical values are 0 to 127 dB). A special value of 0x7FFFFFFF (2147483647) indicates the line attenuation is out of range to be represented. A special value of 0x7FFFFFFE (2147483646) indicates the line attenuation measurement is unavailable. This object reflects the value of the parameter following the most recent DELT performed on the associated line. Once the DELT process is over, the parameter no longer changes until the row is deleted or a new DELT process is initiated. Unit: 0.1 dB " REFERENCE "ITU-T G.997.1, paragraph #7.5.1.8 (SATNds) and paragraph #7.5.1.9 (SATNus)" ::= { vdsl2SCStatusBandEntry 3 } vdsl2SCStatusBandSnrMargin OBJECT-TYPE SYNTAX Integer32 (-640..630 | 2147483646 | 2147483647) UNITS "0.1 dB" MAX-ACCESS read-only STATUS current DESCRIPTION "SNR Margin is the maximum increase in dB of the noise power received at the XTU (xTU-R on downstream direction and xTU-C on upstream direction), such that the BER requirements are met for all bearer channels received at the XTU. It ranges from -640 to 630 units of 0.1 dB (Physical values are -64 to 63 dB). A special value of 0x7FFFFFFF (2147483647) indicates the SNR Margin is out of range to be represented. A special value of 0x7FFFFFFE (2147483646) indicates the SNR Margin measurement is currently unavailable. This object reflects the value of the parameter following the most recent DELT performed on the associated line. Once the DELT process is over, the parameter no longer changes until the row is deleted or a new DELT process is initiated. Unit: 0.1 dB " REFERENCE "ITU-T G.997.1, paragraph #7.5.1.10 (SNRMds) and paragraph #7.5.1.11 (SNRMus)" ::= { vdsl2SCStatusBandEntry 4 } vdsl2SCStatusBandUpbokle OBJECT-TYPE SYNTAX Unsigned32 (0..1280 | 2047 | 2147483647) UNITS "0.1 dB" MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is a vector of UPBO electrical length per-band estimates for each supported upstream/downstream band, expressed in dB at 1 MHz (kl0) calculated by the VTU-O/VTU-R, based on separate measurements in the supported upstream bands excluding US0/downstream bands. The value ranges from 0 to 128 dB in steps of 0.1 dB, with special value 204.7 which indicates that the estimate is greater than 128 dB. This parameter is required for the Alternative Electrical Length Estimation method (ELE-M1). Unit: 0.1 dB " REFERENCE "ITU-T G.997.1, paragraph #7.5.1.23" ::= { vdsl2SCStatusBandEntry 5 } -- vdsl2SCStatusSegmentTable vdsl2SCStatusSegmentTable OBJECT-TYPE SYNTAX SEQUENCE OF Vdsl2SCStatusSegmentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table vdsl2SCStatusSegmentTable contains status parameters of VDSL2/ADSL/ADSL2 and ADSL2+ sub-carriers. Several objects in the table refer to NSus and NSds. For G.993.2, the value of NSus and NSds are respectively the indices of the highest supported upstream and downstream subcarriers according to the selected implementation profile. For ADSL, NSus is equal to NSCus-1 and NSds is equal to NSCds-1. The indexes of this table are ifIndex, vdsl2SCStatusDirection, and vdsl2SCStatusSegment. One index of this entry is an interface index where the interface has an ifType of vdsl2(251). The second index of this entry is the transmission direction. The third index identifies the specific segment of the sub-carriers status addressed. " ::= { vdsl2Status 5 } vdsl2SCStatusSegmentEntry OBJECT-TYPE SYNTAX Vdsl2SCStatusSegmentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table vdsl2SCStatusSegmentTable contains status parameters of VDSL2/ADSL/ADSL2 and ADSL2+ sub-carriers. Several objects in the table refer to NSus and NSds. For G.993.2, the value of NSus and NSds are respectively the indices of the highest supported upstream and downstream subcarriers according to the selected implementation profile. For ADSL, NSus is equal to NSCus-1 and NSds is equal to NSCds-1. The indexes of this entry are ifIndex, vdsl2SCStatusDirection, and vdsl2SCStatusSegment. One index of this entry is an interface index where the interface has an ifType of vdsl2(251). The second index of this entry is the transmission direction. The third index identifies the specific segment of the sub-carriers status addressed. " INDEX { ifIndex, vdsl2SCStatusDirection, vdsl2SCStatusSegment } ::= { vdsl2SCStatusSegmentTable 1 } Vdsl2SCStatusSegmentEntry ::= SEQUENCE { vdsl2SCStatusSegment Unsigned32, vdsl2SCStatusSegmentLinReal OCTET STRING, vdsl2SCStatusSegmentLinImg OCTET STRING, vdsl2SCStatusSegmentLog OCTET STRING, vdsl2SCStatusSegmentQln OCTET STRING, vdsl2SCStatusSegmentSnr OCTET STRING, vdsl2SCStatusSegmentBitsAlloc OCTET STRING, vdsl2SCStatusSegmentGainAlloc OCTET STRING, vdsl2SCStatusSegmentTssi Vdsl2Tssi, vdsl2SCStatusSegmentTxPSD OCTET STRING, vdsl2SCStatusSegmentSnrMargin OCTET STRING, vdsl2SCStatusSegmentLogScGroupSize Unsigned32, vdsl2SCStatusSegmentQlnScGroupSize Unsigned32, vdsl2SCStatusSegmentLinScGroupSize Unsigned32, vdsl2SCStatusSegmentSnrScGroupSize Unsigned32, hwvdsl2SCStatusSegmentQlnWithVectoring OCTET STRING } vdsl2SCStatusSegment OBJECT-TYPE SYNTAX Unsigned32(1..8) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The segment of the sub-carriers status information provided by this row. Several status parameters in this table are retrieved in segments. The first segment of the status information is retrieved with vdsl2SCStatusSegment=1, the second segment is retrieved with vdsl2SCStatusSegment=2, and so on. When any status parameter is retrieved in n segments where n<8) then, for that parameter, GET operations for the rest segment numbers (n+1 to 8) are responded with a value that indicates: No measurement could be done. " ::= { vdsl2SCStatusSegmentEntry 1 } vdsl2SCStatusSegmentLinReal OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..1024)) MAX-ACCESS read-only STATUS current DESCRIPTION "An array of up to 512 complex H(f) linear representation values in linear scale for the respective transmission direction. It is designed to support up to 512 (downstream) sub-carriers groups and can be retrieved in a single segment. The number of utilized values on downstream direction depends on NSds, and on upstream direction it depends on NSus. This value is referred here as NS. Each array entry represents the real component [referred here as a(i)] of Hlin(f = i*Df) value for a particular sub-carrier group index i (0 <= i < NS). Hlin(f) is represented as ((scale/2^15)*((a(i)+j*b(i))/2^15)), where scale is vdsl2SCStatusLinScale and a(i) and b(i) [provided by the vdsl2SCStatusSegmentLinImg object] are in the range (-2^15+1) to (+2^15-1). A special value a(i)=b(i)= -2^15 indicates that no measurement could be done for the sub-carriers group because it is out of the passband or that the attenuation is out of range to be represented. This parameter is only available after a loop diagnostic procedure. Each value in this array is 16 bits wide and is stored in big endian format. " REFERENCE "ITU-T G.997.1, paragraph #7.5.1.26.3 (HLINpsds) and paragraph #7.5.1.26.9 (HLINpsus)" ::= { vdsl2SCStatusSegmentEntry 2 } vdsl2SCStatusSegmentLinImg OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..1024)) MAX-ACCESS read-only STATUS current DESCRIPTION "An array of up to 512 complex H(f) linear representation values in linear scale for the respective transmission direction. It is designed to support up to 512 (downstream) sub-carriers groups and can be retrieved in a single segment. The number of utilized values on downstream direction depends on NSds, and on upstream direction it depends on NSus. This value is referred here as NS. Each array entry represents the imaginary component [referred here as b(i)] of Hlin(f = i*Df) value for a particular sub- carrier group index i (0 <= i < NS). Hlin(f) is represented as ((scale/2^15)*((a(i)+j*b(i))/2^15)), where scale is vdsl2SCStatusLinScale and a(i) [provided by the vdsl2SCStatusSegmentLinReal object] and b(i) are in the range (-2^15+1) to (+2^15-1). A special value a(i)=b(i)= -2^15 indicates that no measurement could be done for the sub-carriers group because it is out of the passband or that the attenuation is out of range to be represented. This parameter is only available after a loop diagnostic procedure. Each value in this array is 16 bits wide and is stored in big endian format. " REFERENCE "ITU-T G.997.1, paragraph #7.5.1.26.3 (HLINpsds) and paragraph #7.5.1.26.9 (HLINpsus)" ::= { vdsl2SCStatusSegmentEntry 3 } vdsl2SCStatusSegmentLog OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..1024)) UNITS "dB" MAX-ACCESS read-only STATUS current DESCRIPTION "An array of up to 512 real H(f) logarithmic representation values in dB for the respective transmission direction. It is designed to support up to 512 (downstream) sub-carriers groups and can be retrieved in a single segment. The number of utilized values on downstream direction depends on NSds, and on upstream direction it depends on NSus. This value is referred here as NS. Each array entry represents the real Hlog(f = i*Df) value for a particular sub-carrier group index i, (0 <= i < NS). The real Hlog(f) value is represented as (6-m(i)/10), with m(i) in the range 0 to 1022. A special value m=1023 indicates that no measurement could be done for the sub-carrier group because it is out of the passband or that the attenuation is out of range to be represented. This parameter is applicable in loop diagnostic procedure and initialization. Each value in this array is 16 bits wide and is stored in big endian format. Unit: dB " REFERENCE "ITU-T G.997.1, paragraph #7.5.1.26.6 (HLOGpsds) and paragraph #7.5.1.26.12 (HLOGpsus)" ::= { vdsl2SCStatusSegmentEntry 4 } vdsl2SCStatusSegmentQln OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..512)) UNITS "dBm/Hz" MAX-ACCESS read-only STATUS current DESCRIPTION "An array of up to 512 real Quiet Line Noise values in dBm/Hz for the respective transmission direction. It is designed for up to 512 (downstream) sub-carriers groups and can be retrieved in a single segment. The number of utilized values on downstream direction depends on NSds, and on upstream direction it depends on NSus. This value is referred here as NS. Each array entry represents the QLN(f = i*Df) value for a particular sub-carrier index i, (0 <= i < NS). The QLN(f) is represented as ( -23-n(i)/2), with n(i) in the range 0 to 254. A special value n(i)=255 indicates that no measurement could be done for the sub-carrier group because it is out of the passband or that the noise PSD is out of range to be represented. This parameter is applicable in loop diagnostic procedure and initialization. Each value in this array is 8 bits wide. Unit: dBm/Hz " REFERENCE "ITU-T G.997.1, paragraph #7.5.1.27.3 (QLNpsds) and paragraph #7.5.1.27.6 (QLNpsus)" ::= { vdsl2SCStatusSegmentEntry 5 } vdsl2SCStatusSegmentSnr OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..512)) UNITS "0.5 dB" MAX-ACCESS read-only STATUS current DESCRIPTION "The SNR Margin per sub-carrier group, expressing the ratio between the received signal power and received noise power per sub-scriber group. It is an array of 512 octets, designed for supporting up to 512 (downstream) sub-carriers groups and can be retrieved in a single segment. The number of utilized octets on downstream direction depends on NSds, and on upstream direction it depends on NSus. This value is referred here as NS. Octet i (0 <= i < NS) is set to a value in the range 0 to 254 to indicate that the respective downstream or upstream sub- carrier group i has SNR of: (-32 + xdsl2SCStatusSegmentSnr(i)/2) in dB (i.e., -32 to 95dB). The special value 255 means that no measurement could be done for the sub-carrier group because it is out of the PSD mask passband or that the noise PSD is out of range to be represented. Each value in this array is 8 bits wide. Unit: 0.5 dB " REFERENCE "ITU-T G.997.1, paragraph #7.5.1.28.3 (SNRpsds) and paragraph #7.5.1.28.6 (SNRpsus)" ::= { vdsl2SCStatusSegmentEntry 6 } vdsl2SCStatusSegmentBitsAlloc OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) UNITS "bits" MAX-ACCESS read-only STATUS current DESCRIPTION "The bits allocation per sub-carrier. An array of 256 octets (512 nibbles), designed for supporting up to 512 (downstream) sub-carriers. When more then 512 sub-carriers are supported, the status information is reported through multiple (up to 8) segments. The first segment is then used for the first 512 sub-carriers. The second segment is used for the sub-carriers 512 to 1023 and so on. The aggregate number of utilized nibbles on downstream direction (in all segments) depends on NSds, and on upstream direction it depends on NSus. This value is referred here as NS. The segment number is in xdsl2SCStatusSegment. Nibble i (0 <= i < MIN(NS-(segment-1)*512,512)) in each segment is set to a value in the range 0 to 15 to indicate that the respective downstream or upstream sub-carrier j (j=(segement-1)*512+i) has the same amount of bits allocation. Unit: bits " REFERENCE "ITU-T G.997.1, paragraph #7.5.1.29.1 (BITSpsds) and paragraph #7.5.1.29.2 (BITSpsus)" ::= { vdsl2SCStatusSegmentEntry 7 } vdsl2SCStatusSegmentGainAlloc OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..1024)) MAX-ACCESS read-only STATUS current DESCRIPTION "The gain allocation per sub-carrier. An array of 512 16-bits values, designed for supporting up to 512 (downstream) sub- carriers. When more then 512 sub-carriers are supported, the status information is reported through multiple (up to 8) segments. The first segment is then used for the first 512 sub-carriers. The second segment is used for the sub-carriers 512 to 1023 and so on. The aggregate number of utilized octets on downstream direction depends on NSds, and on upstream direction it depends on NSus. This value is referred here as NS. The segment number is in xdsl2SCStatusSegment. Value i (0 <= i < MIN(NS-(segment-1)*512,512)) in each segment is set to a value in the range 0 to 4093 to indicate that the respective downstream or upstream sub-carrier j (j=(segement-1)*512+i) has the same amount of gain value. The gain value is represented as a multiple of 1/512 on linear scale. Each value in this array is 16 bits wide and is stored in big endian format. " REFERENCE "ITU-T G.997.1, paragraph #7.5.1.29.3 (GAINSpsds) and paragraph #7.5.1.29.4 (GAINSpsus)" ::= { vdsl2SCStatusSegmentEntry 8 } vdsl2SCStatusSegmentTssi OBJECT-TYPE SYNTAX Vdsl2Tssi MAX-ACCESS read-only STATUS current DESCRIPTION "The transmit spectrum shaping (TSSi) breakpoints expressed as the set of breakpoints exchanged during G.994.1. Each breakpoint is a pair of values occupying 3 octets with the following structure: First 2 octets - Index of the subcarrier used in the context of the breakpoint. Third octet - The shaping parameter at the breakpoint. Subcarrier index is an unsigned number in the range 1 to either NSCds (downstream direction) or NSCus (upstream direction). The shaping parameter value is in the range 0 to 127 (units of -0.5dB). The special value 127 indicates that the subcarrier is not transmitted. " REFERENCE "ITU-T G.997.1, paragraph #7.5.1.29.5 (TSSpsds) and paragraph #7.5.1.29.6 (TSSpsus)" ::= { vdsl2SCStatusSegmentEntry 9 } vdsl2SCStatusSegmentTxPSD OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..1024)) MAX-ACCESS read-only STATUS current DESCRIPTION "The TxPSD per sub-carrier. An array of 512 16-bits values, designed for supporting up to 512 (downstream) sub- carriers. When more then 512 sub-carriers are supported, the status information is reported through multiple (up to 8) segments. The first segment is then used for the first 512 sub-carriers. The second segment is used for the sub-carriers 512 to 1023 and so on. " ::= { vdsl2SCStatusSegmentEntry 65535 } vdsl2SCStatusSegmentSnrMargin OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..1024)) MAX-ACCESS read-only STATUS current DESCRIPTION "The SnrMargin per sub-carrier. An array of 512 16-bits values, designed for supporting up to 512 (downstream) sub- carriers. When more then 512 sub-carriers are supported, the status information is reported through multiple (up to 8) segments. The first segment is then used for the first 512 sub-carriers. The second segment is used for the sub-carriers 512 to 1023 and so on. " ::= { vdsl2SCStatusSegmentEntry 65536 } vdsl2SCStatusSegmentLogScGroupSize OBJECT-TYPE SYNTAX Unsigned32(1 | 2 | 4 | 8) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of sub-carriers per group used to report the H(f) logarithmic representation values for the respective transmission direction. The valid values are 1, 2, 4 and 8. For ADSL, this parameter is equal to one and, for VDSL2, it is equal to the size of a sub-carrier group used to compute these parameters. This parameter is only available after a loop diagnostic procedure. It's available for the first segment, other segments return '-1'. " REFERENCE "ITU-T G.997.1, paragraph #7.5.1.26.2 (HLINGds) and paragraph #7.5.1.26.8 (HLINGus)" ::= { vdsl2SCStatusSegmentEntry 65537 } vdsl2SCStatusSegmentQlnScGroupSize OBJECT-TYPE SYNTAX Unsigned32(1 | 2 | 4 | 8) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of sub-carriers per group used to report the Quiet Line Noise values for the respective transmission direction. The valid values are 1, 2, 4 and 8. For ADSL, this parameter is equal to one and, for VDSL2, it is equal to the size of a sub-carrier group used to compute these parameters. This parameter is only available after a loop diagnostic procedure. It's available for the first segment, other segments return '-1'. " REFERENCE "ITU-T G.997.1, paragraph #7.5.1.26.2 (HLINGds) and paragraph #7.5.1.26.8 (HLINGus)" ::= { vdsl2SCStatusSegmentEntry 65538 } vdsl2SCStatusSegmentLinScGroupSize OBJECT-TYPE SYNTAX Unsigned32(1 | 2 | 4 | 8) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of sub-carriers per group used to report the H(f) linear representation values for the respective transmission direction. The valid values are 1, 2, 4 and 8. For ADSL, this parameter is equal to one and, for VDSL2, it is equal to the size of a sub-carrier group used to compute these parameters. This parameter is only available after a loop diagnostic procedure. It's available for the first segment, other segments return '-1'. " REFERENCE "ITU-T G.997.1, paragraph #7.5.1.26.2 (HLINGds) and paragraph #7.5.1.26.8 (HLINGus)" ::= { vdsl2SCStatusSegmentEntry 65539 } vdsl2SCStatusSegmentSnrScGroupSize OBJECT-TYPE SYNTAX Unsigned32(1 | 2 | 4 | 8) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of sub-carriers per group used to report the SNR values on the respective transmission direction. The valid values are 1, 2, 4 and 8. For ADSL, this parameter is equal to one and, for VDSL2, it is equal to the size of a sub-carrier group used to compute these parameters. This parameter is only available after a loop diagnostic procedure. It's available for the first segment, other segments return '-1'. " REFERENCE "ITU-T G.997.1, paragraph #7.5.1.26.2 (HLINGds) and paragraph #7.5.1.26.8 (HLINGus)" ::= { vdsl2SCStatusSegmentEntry 65540 } hwvdsl2SCStatusSegmentQlnWithVectoring OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..512)) UNITS "dBm/Hz" MAX-ACCESS read-only STATUS current DESCRIPTION "An array of up to 512 real Quiet Line Noise values in dBm/Hz for the respective transmission direction. It is designed for up to 512 (downstream) sub-carriers groups and can be retrieved in a single segment. The number of utilized values on downstream direction depends on NSds, and on upstream direction it depends on NSus. This value is referred here as NS. Each array entry represents the QLN(f = i*Df) value for a particular sub-carrier index i, (0 <= i < NS). The QLN(f) is represented as ( -23-n(i)/2), with n(i) in the range 0 to 254. A special value n(i)=255 indicates that no measurement could be done for the sub-carrier group because it is out of the passband or that the noise PSD is out of range to be represented. This parameter is applicable in loop diagnostic procedure and initialization. Each value in this array is 8 bits wide. Unit: dBm/Hz This value is calculated with vectoring effect. " REFERENCE "ITU-T G.997.1, paragraph #7.5.1.27.3 (QLNpsds) and paragraph #7.5.1.27.6 (QLNpsus)" ::= { vdsl2SCStatusSegmentEntry 65541 } hwVdslSCFextTable OBJECT-TYPE SYNTAX SEQUENCE OF HwVdslSCFextEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table hwVdslSCFextTable contains FEXT coupling function parameters. The indexes of this table are ifIndex, hwVdslSCFextFromIfindex, and hwVdslSCFextRequestXLinScGroupSize. " ::= { vdsl2Status 6 } hwVdslSCFextEntry OBJECT-TYPE SYNTAX HwVdslSCFextEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table hwVdslSCFextTable contains FEXT coupling function parameters. The indexes of this entry are ifIndex, hwVdslSCFextFromIfindex, and hwVdslSCFextRequestXLinScGroupSize. " INDEX { ifIndex, hwVdslSCFextFromIfindex, hwVdslSCFextRequestXLinScGroupSize } ::= { hwVdslSCFextTable 1 } HwVdslSCFextEntry ::= SEQUENCE { hwVdslSCFextFromIfindex Integer32, hwVdslSCFextRequestXLinScGroupSize Unsigned32, hwVdslSCFextXLinScaleDs Unsigned32, hwVdslSCFextXlinScGroupSizeDs Unsigned32, hwVdslSCFextXLinBandDs OCTET STRING, hwVdslSCFextXlinRealDs OCTET STRING, hwVdslSCFextXlinImgDs OCTET STRING, hwVdslSCFextXLinScaleUs Unsigned32, hwVdslSCFextXlinScGroupSizeUs Unsigned32, hwVdslSCFextXLinBandUs OCTET STRING, hwVdslSCFextXlinRealUs OCTET STRING, hwVdslSCFextXlinImgUs OCTET STRING } hwVdslSCFextFromIfindex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The hwVdslSCFextFromIfindex is an interface index where the interface has an ifType of vdsl2(251). " ::= { hwVdslSCFextEntry 1 } hwVdslSCFextRequestXLinScGroupSize OBJECT-TYPE SYNTAX Unsigned32(1 | 2 | 4 | 8 | 16 | 32 | 64) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This parameter is the requested value of XLING. The valid values are 1, 2, 4, 8, 16, 32, and 64. " REFERENCE "ITU-T G.997.1, paragraph #7.5.1.38.3 and #7.5.1.38.8" ::= { hwVdslSCFextEntry 2 } hwVdslSCFextXLinScaleDs OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is the scale factor to be applied to the downstream Xlinpsds values. It is represented as an unsigned integer in the range from 1 to 2^16 - 1. " REFERENCE "ITU-T G.997.1, paragraph #7.5.1.38.1 " ::= { hwVdslSCFextEntry 3 } hwVdslSCFextXlinScGroupSizeDs OBJECT-TYPE SYNTAX Unsigned32(1 | 2 | 4 | 8 | 16 | 32 | 64) MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is the number of subcarriers per group used to report Xlinpsds. The valid values are 1, 2, 4, 8, 16, 32, and 64. XLINGds should equal the sub-sampling factor used to estimate the crosstalk channel for cancellation. " REFERENCE "ITU-T G.997.1, paragraph #7.5.1.38.2" ::= { hwVdslSCFextEntry 4 } hwVdslSCFextXLinBandDs OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..96)) MAX-ACCESS read-only STATUS current DESCRIPTION "XLINBANDSds contains pairs of (start_subcarrier_index, stop_subcarrier_index) for every band in which XLINpsds is reported. " REFERENCE "ITU-T G.997.1, paragraph #7.5.1.38.4" ::= { hwVdslSCFextEntry 5 } hwVdslSCFextXlinRealDs OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..1024)) MAX-ACCESS read-only STATUS current DESCRIPTION "For each given VCE port index k, this parameter is a one-dimensional array of complex values in linear scale for downstream FEXT coupling coefficients Xlinds(f) originating from the loop connected to the VCE port k into the loop for which Xlinds(f) is being reported. Each array entry represents the Xlinds(f = n*Df) value for a particular subcarrier index n. The Xlinds(f = n*Df) value is represented as ((XLINSCds/2^15) * ((a(n) + j*b(n))/2^15)), where a(n) and b(n) are signed integers in the (-2^15 + 1) to (+2^15 - 1) range. A special value indicates that no measurement could be done from line k into this line for subcarrier n. Another special value indicates that there is no phase information and the magnitude of Xlinds (f = n*Df) is ((XLINSCds/2^15) * (a(n)/2^15)). " REFERENCE "ITU-T G.997.1, paragraph #7.5.1.38.5 " ::= { hwVdslSCFextEntry 6 } hwVdslSCFextXlinImgDs OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..1024)) MAX-ACCESS read-only STATUS current DESCRIPTION "For each given VCE port index k, this parameter is a one-dimensional array of complex values in linear scale for downstream FEXT coupling coefficients Xlinds(f) originating from the loop connected to the VCE port k into the loop for which Xlinds(f) is being reported. Each array entry represents the Xlinds(f = n*Df) value for a particular subcarrier index n. The Xlinds(f = n*Df) value is represented as ((XLINSCds/2^15) * ((a(n) + j*b(n))/2^15)), where a(n) and b(n) are signed integers in the (-2^15 + 1) to (+2^15 - 1) range. A special value indicates that no measurement could be done from line k into this line for subcarrier n. Another special value indicates that there is no phase information and the magnitude of Xlinds (f = n*Df) is ((XLINSCds/2^15) * (a(n)/2^15)). " REFERENCE "ITU-T G.997.1, paragraph #7.5.1.38.5" ::= { hwVdslSCFextEntry 7 } hwVdslSCFextXLinScaleUs OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is the scale factor to be applied to the upstream Xlinpsus values. It is represented as an unsigned integer in the range from 1 to 2^16 - 1. " REFERENCE "ITU-T G.997.1, paragraph #7.5.1.38.6" ::= { hwVdslSCFextEntry 8 } hwVdslSCFextXlinScGroupSizeUs OBJECT-TYPE SYNTAX Unsigned32(1 | 2 | 4 | 8 | 16 | 32 | 64) MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is the number of subcarriers per group used to report Xlinpsus. The valid values are 1, 2, 4, 8, 16, 32, and 64. XLINGus should equal the sub-sampling factor used to estimate the crosstalk channel for cancellation. " REFERENCE "ITU-T G.997.1, paragraph #7.5.1.38.7" ::= { hwVdslSCFextEntry 9 } hwVdslSCFextXLinBandUs OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..96)) MAX-ACCESS read-only STATUS current DESCRIPTION "XLINBANDSus contains pairs of (start_subcarrier_index, stop_subcarrier_index) for every band in which XLINpsus is reported. " REFERENCE "ITU-T G.997.1, paragraph #7.5.1.38.9" ::= { hwVdslSCFextEntry 10 } hwVdslSCFextXlinRealUs OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..1024)) MAX-ACCESS read-only STATUS current DESCRIPTION "For each given VCE port index k, this parameter is a one-dimensional array of complex values in linear scale for upstream FEXT coupling coefficients Xlinus(f) originating from the loop connected to the VCE port k into the loop for which Xlinus(f) is being reported. Each array entry represents the Xlinus(f = n*Df) value for a particular subcarrier index n. The Xlinus(f = n*Df) value is represented as ((XLINSCus/2^15) * ((a(n) + j*b(n))/2^15)), where a(n) and b(n) are signed integers in the (-2^15 + 1) to (+2^15 - 1) range. A special value indicates that no measurement could be done from line k into this line for subcarrier n. Another special value indicates that there is no phase information and the magnitude of Xlinus (f = n*Df) is ((XLINSCus/2^15) * (a(n)/2^15)). " REFERENCE "ITU-T G.997.1, paragraph #7.5.1.38.10" ::= { hwVdslSCFextEntry 11 } hwVdslSCFextXlinImgUs OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..1024)) MAX-ACCESS read-only STATUS current DESCRIPTION "For each given VCE port index k, this parameter is a one-dimensional array of complex values in linear scale for upstream FEXT coupling coefficients Xlinus(f) originating from the loop connected to the VCE port k into the loop for which Xlinus(f) is being reported. Each array entry represents the Xlinus(f = n*Df) value for a particular subcarrier index n. The Xlinus(f = n*Df) value is represented as ((XLINSCus/2^15) * ((a(n) + j*b(n))/2^15)), where a(n) and b(n) are signed integers in the (-2^15 + 1) to (+2^15 - 1) range. A special value indicates that no measurement could be done from line k into this line for subcarrier n. Another special value indicates that there is no phase information and the magnitude of Xlinus (f = n*Df) is ((XLINSCus/2^15) * (a(n)/2^15)). " REFERENCE "ITU-T G.997.1, paragraph #7.5.1.38.10" ::= { hwVdslSCFextEntry 12 } -- vdsl2LineInventoryTable vdsl2LineInventoryTable OBJECT-TYPE SYNTAX SEQUENCE OF Vdsl2LineInventoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table vdsl2LineInventoryTable contains inventory of VDSL2 unit. The indexes of this table are ifIndex and vdsl2LInvUnit. " ::= { vdsl2Inventory 1 } vdsl2LineInventoryEntry OBJECT-TYPE SYNTAX Vdsl2LineInventoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table vdsl2LineInventoryTable contains inventory of VDSL2 unit. The indexes of this entry are ifIndex and vdsl2LInvUnit. " INDEX { ifIndex, vdsl2LInvUnit } ::= { vdsl2LineInventoryTable 1 } Vdsl2LineInventoryEntry ::= SEQUENCE { vdsl2LInvUnit Vdsl2Unit, vdsl2LInvG994VendorId OCTET STRING, vdsl2LInvSystemVendorId OCTET STRING, vdsl2LInvVersionNumber OCTET STRING, vdsl2LInvSerialNumber OCTET STRING, vdsl2LInvSelfTestResult OCTET STRING, vdsl2LInvTransmissionCapabilities Vdsl2TransmissionModeType, vdsl2LInvModelId OCTET STRING } vdsl2LInvUnit OBJECT-TYPE SYNTAX Vdsl2Unit MAX-ACCESS not-accessible STATUS current DESCRIPTION "The termination unit XTUC{1} or XTUR{2}." ::= { vdsl2LineInventoryEntry 1 } vdsl2LInvG994VendorId OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..8)) MAX-ACCESS read-only STATUS current DESCRIPTION "The xTU G.994.1 Vendor ID as inserted in the G.994.1 CL/CLR message. It consists of 8 binary octets, including a country code followed by a (regionally allocated) provider code, as defined in Recommendation T.35. " REFERENCE "ITU-T G.997.1(200604), paragraph 7.4" ::= { vdsl2LineInventoryEntry 2 } vdsl2LInvSystemVendorId OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..8)) MAX-ACCESS read-only STATUS current DESCRIPTION "The xTU System Vendor ID (identifies the xTU system integrator) as inserted in the Overhead Messages (both xTUs for G.992.3 and G.992.4) or in the Embedded Operations Channel (only xTU-R in G.992.1 and G.992.2). It consists of 8 binary octets, with same format as used for Vdsl2InvG994VendorId. " REFERENCE "ITU-T G.997.1(200604), paragraph 7.4" ::= { vdsl2LineInventoryEntry 3 } vdsl2LInvVersionNumber OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The xTU version number (vendor specific information) as inserted in the Overhead Messages (both xTUs for G.992.3 and G.992.4) or in the Embedded Operations Channel (only xTU-R in G.992.1 and G.992.2). It consists of up to 16 binary octets. " REFERENCE "ITU-T G.997.1(200604), paragraph 7.4" ::= { vdsl2LineInventoryEntry 4 } vdsl2LInvSerialNumber OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The xTU serial number (vendor specific information) as inserted in the Overhead Messages (both xTUs for G.992.3 and G.992.4) or in the Embedded Operations Channel (only xTU-R in G.992.1 and G.992.2). It is vendor specific information. It consists of up to 32 ASCII characters. " REFERENCE "ITU-T G.997.1(200604), paragraph 7.4" ::= { vdsl2LineInventoryEntry 5 } vdsl2LInvSelfTestResult OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..4)) MAX-ACCESS read-only STATUS current DESCRIPTION "The xTU self-test result, coded as a 32-bit integer. The most significant octet of this object is '0' if the self-test passed, and '1' if the self-test failed. The interpretation of the other octets is vendor discretionary. " REFERENCE "ITU-T G.997.1(200604), paragraph 7.4" ::= { vdsl2LineInventoryEntry 6 } vdsl2LInvTransmissionCapabilities OBJECT-TYPE SYNTAX Vdsl2TransmissionModeType MAX-ACCESS read-only STATUS current DESCRIPTION "The xTU transmission system capability list of the different coding types. It is coded in a bit-map representation with 1 or more bits set. A bit set to '1' means that the xTU supports the respective coding. The value may be derived from the handshaking procedures defined in G.994.1. A set of VDSL2 line transmission modes, with one bit per mode. " REFERENCE "ITU-T G.997.1(200604), paragraph 7.4" ::= { vdsl2LineInventoryEntry 7 } vdsl2LInvModelId OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The XTU model ID." ::= { vdsl2LineInventoryEntry 8 } -- vdsl2LineConfTemplateTable vdsl2LineConfTemplateTable OBJECT-TYPE SYNTAX SEQUENCE OF Vdsl2LineConfTemplateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table vdsl2LineConfTemplateTable contains VDSL2 line configuration template. The index of this table is vdsl2LConfTempTemplateName. A default template with an index of 'DEFVAL' will always exist and its parameters will be set to vendor-specific values, unless otherwise specified in this document. " ::= { vdsl2ProfileLine 1 } vdsl2LineConfTemplateEntry OBJECT-TYPE SYNTAX Vdsl2LineConfTemplateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table vdsl2LineConfTemplateTable contains VDSL2 line configuration template. The index of this entry is vdsl2LConfTempTemplateName. A default template with an index of 'DEFVAL' will always exist and its parameters will be set to vendor-specific values, unless otherwise specified in this document. " INDEX { IMPLIED vdsl2LConfTempTemplateName } ::= { vdsl2LineConfTemplateTable 1 } Vdsl2LineConfTemplateEntry ::= SEQUENCE { vdsl2LConfTempTemplateName OCTET STRING, vdsl2LConfTempLineProfile OCTET STRING, vdsl2LConfTempChan1ConfProfile OCTET STRING, vdsl2LConfTempChan1RaRatioDs Unsigned32, vdsl2LConfTempChan1RaRatioUs Unsigned32, vdsl2LConfTempChan2ConfProfile OCTET STRING, vdsl2LConfTempChan2RaRatioDs Unsigned32, vdsl2LConfTempChan2RaRatioUs Unsigned32, vdsl2LConfTempChan3ConfProfile OCTET STRING, vdsl2LConfTempChan3RaRatioDs Unsigned32, vdsl2LConfTempChan3RaRatioUs Unsigned32, vdsl2LConfTempChan4ConfProfile OCTET STRING, vdsl2LConfTempChan4RaRatioDs Unsigned32, vdsl2LConfTempChan4RaRatioUs Unsigned32, vdsl2LConfTempRowStatus RowStatus } vdsl2LConfTempTemplateName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object identifies a row in this table." REFERENCE "DSL Forum TR-90, paragraph 5.1.4" ::= { vdsl2LineConfTemplateEntry 1 } vdsl2LConfTempLineProfile OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of this object identifies the row in the VDSL2 Line Configuration Profile Table, (Vdsl2LineConfProfileTable), which applies for this VDSL2 line. " REFERENCE "DSL Forum TR-90, paragraph 5.1.4" DEFVAL { "DEFVAL" } ::= { vdsl2LineConfTemplateEntry 2 } vdsl2LConfTempChan1ConfProfile OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of this object identifies the row in the VDSL2 Channel Configuration Profile Table, (Vdsl2ChanConfProfileTable) that applies to VDSL2 bearer channel #1. The channel profile name specified here must match the name of an existing row in the vdsl2ChConfProfileTable table. " DEFVAL { "DEFVAL" } ::= { vdsl2LineConfTemplateEntry 3 } vdsl2LConfTempChan1RaRatioDs OBJECT-TYPE SYNTAX Unsigned32(0..100) UNITS "percents" MAX-ACCESS read-create STATUS current DESCRIPTION "Rate Adaptation Ratio. The ratio (in %) that should be taken into account for the bearer channel #1 when performing rate adaptation on Downstream. The ratio refers to the available data rate in excess of the Minimum Data Rate, summed over all bearer channels. Also, the 100 - Vdsl2ConfTemplateChan1RaRatioDs is the ratio of excess data rate to be assigned to all other bearer channels on Downstream direction. The sum of rate adaptation ratios over all bearers on the same direction shall be equal to 100%. Unit: percents " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.1" DEFVAL { 100 } ::= { vdsl2LineConfTemplateEntry 4 } vdsl2LConfTempChan1RaRatioUs OBJECT-TYPE SYNTAX Unsigned32(0..100) UNITS "percents" MAX-ACCESS read-create STATUS current DESCRIPTION "Rate Adaptation Ratio. The ratio (in %) that should be taken into account for the bearer channel #1 when performing rate adaptation on Upstream. The ratio refers to the available data rate in excess of the Minimum Data Rate, summed over all bearer channels. Also, the 100 - Vdsl2ConfTemplateChan1RaRatioUs is the ratio of excess data rate to be assigned to all other bearer channels on Upstream direction. The sum of rate adaptation ratios over all bearers on the same direction shall be equal to 100 %. Unit: percents " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.1" DEFVAL { 100 } ::= { vdsl2LineConfTemplateEntry 5 } vdsl2LConfTempChan2ConfProfile OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of this object identifies the row in the VDSL2 Channel Configuration Profile Table, (Vdsl2ChanConfProfileTable) that applies to VDSL2 bearer channel #2. If the channel is unused, then the object is set to a zero length string. This object may be set to a zero length string only if vdsl2LConfTempChan3ConfProfile contains a zero length string. " ::= { vdsl2LineConfTemplateEntry 6 } vdsl2LConfTempChan2RaRatioDs OBJECT-TYPE SYNTAX Unsigned32(0..100) UNITS "percents" MAX-ACCESS read-create STATUS current DESCRIPTION "Rate Adaptation Ratio. The ratio (in %) that should be taken into account for the bearer channel #2 when performing rate adaptation on Downstream. The ratio refers to the available data rate in excess of the Minimum Data Rate, summed over all bearer channels. Also, the 100 - Vdsl2ConfTemplateChan2RaRatioDs is the ratio of excess data rate to be assigned to all other bearer channels on Downstream direction. The sum of rate adaptation ratios over all bearers on the same direction shall be equal to 100%. Unit: percents " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.1" DEFVAL { 0 } ::= { vdsl2LineConfTemplateEntry 7 } vdsl2LConfTempChan2RaRatioUs OBJECT-TYPE SYNTAX Unsigned32(0..100) UNITS "percents" MAX-ACCESS read-create STATUS current DESCRIPTION "Rate Adaptation Ratio. The ratio (in %) that should be taken into account for the bearer channel #2 when performing rate adaptation on Upstream. The ratio refers to the available data rate in excess of the Minimum Data Rate, summed over all bearer channels. Also, the 100 - Vdsl2ConfTemplateChan2RaRatioUs is the ratio of excess data rate to be assigned to all other bearer channels on Upstream direction. The sum of rate adaptation ratios over all bearers on the same direction shall be equal to 100 %. Unit: percents " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.1" DEFVAL { 0 } ::= { vdsl2LineConfTemplateEntry 8 } vdsl2LConfTempChan3ConfProfile OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of this object identifies the row in the VDSL2 Channel Configuration Profile Table, (Vdsl2ChanConfProfileTable) that applies to VDSL2 bearer channel #3. If the channel is unused, then the object is set to a zero length string. This object may be set to a zero length string only if vdsl2LConfTempChan4ConfProfile contains a zero length string. This object may be set to a non-zero length string only if vdsl2LConfTempChan2ConfProfile contains a non-zero length string. " ::= { vdsl2LineConfTemplateEntry 9 } vdsl2LConfTempChan3RaRatioDs OBJECT-TYPE SYNTAX Unsigned32(0..100) UNITS "percents" MAX-ACCESS read-create STATUS current DESCRIPTION "Rate Adaptation Ratio. The ratio (in %) that should be taken into account for the bearer channel #3 when performing rate adaptation on Downstream. The ratio refers to the available data rate in excess of the Minimum Data Rate, summed over all bearer channels. Also, the 100 - Vdsl2ConfTemplateChan3RaRatioDs is the ratio of excess data rate to be assigned to all other bearer channels on Downstream direction. The sum of rate adaptation ratios over all bearers on the same direction shall be equal to 100%. Unit: percents " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.1" DEFVAL { 0 } ::= { vdsl2LineConfTemplateEntry 10 } vdsl2LConfTempChan3RaRatioUs OBJECT-TYPE SYNTAX Unsigned32(0..100) UNITS "percents" MAX-ACCESS read-create STATUS current DESCRIPTION "Rate Adaptation Ratio. The ratio (in %) that should be taken into account for the bearer channel #3 when performing rate adaptation on Upstream. The ratio refers to the available data rate in excess of the Minimum Data Rate, summed over all bearer channels. Also, the 100 - Vdsl2ConfTemplateChan3RaRatioUs is the ratio of excess data rate to be assigned to all other bearer channels on Upstream direction. The sum of rate adaptation ratios over all bearers on the same direction shall be equal to 100%. Unit: percents " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.1" DEFVAL { 0 } ::= { vdsl2LineConfTemplateEntry 11 } vdsl2LConfTempChan4ConfProfile OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of this object identifies the row in the VDSL2 Channel Configuration Profile Table (Vdsl2ChanConfProfileTableDs) that applies to VDSL2 bearer channel #4. If the channel is unused, then the object is set to a zero length string. This object may be set to a non-zero length string only if vdsl2LConfTempChan3ConfProfile contains a non-zero length string. " ::= { vdsl2LineConfTemplateEntry 12 } vdsl2LConfTempChan4RaRatioDs OBJECT-TYPE SYNTAX Unsigned32(0..100) UNITS "percents" MAX-ACCESS read-create STATUS current DESCRIPTION "Rate Adaptation Ratio. The ratio (in %) that should be taken into account for the bearer channel #4 when performing rate adaptation on Downstream. The ratio refers to the available data rate in excess of the Minimum Data Rate, summed over all bearer channels. Also, the 100 - vdsl2LConfTempChan4RaRatioDs is the ratio of excess data rate to be assigned to all other bearer channels. The sum of rate adaptation ratios over all bearers on the same direction shall sum to 100%. Unit: percents " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.1" DEFVAL { 0 } ::= { vdsl2LineConfTemplateEntry 13 } vdsl2LConfTempChan4RaRatioUs OBJECT-TYPE SYNTAX Unsigned32(0..100) UNITS "percents" MAX-ACCESS read-create STATUS current DESCRIPTION "Rate Adaptation Ratio. The ratio (in %) that should be taken into account for the bearer channel #4 when performing rate adaptation on Upstream. The ratio refers to the available data rate in excess of the Minimum Data Rate, summed over all bearer channels. Also, the 100 - vdsl2LConfTempChan4RaRatioUs is the ratio of excess data rate to be assigned to all other bearer channels. The sum of rate adaptation ratios over all bearers on the same direction shall sum to 100%. Unit: percents " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.1" DEFVAL { 0 } ::= { vdsl2LineConfTemplateEntry 14 } vdsl2LConfTempRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. When 'active' is set, the system will validate the profile. Before a profile can be deleted or taken out of service (by setting this object to 'destroy' or 'outOfService'), it must be not referenced from all associated lines. " ::= { vdsl2LineConfTemplateEntry 15 } -- vdsl2LineConfProfTable Vdsl2LineClockReferenceType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The various clock references for the VDSL line. Options: 1. freeRun(1) - network timing reference clock mode is freeRun 2. system(2) - network timing reference clock mode is system " SYNTAX INTEGER { freeRun(1), system(2) } vdsl2LineConfProfTable OBJECT-TYPE SYNTAX SEQUENCE OF Vdsl2LineConfProfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table vdsl2LineConfProfTable contains VDSL2 line profile configuration. The index of this table is vdsl2LConfProfProfileName. A default profile with an index of 'DEFVAL' will always exist and its parameters will be set to vendor-specific values, unless otherwise specified in this document. " ::= { vdsl2ProfileLine 2 } vdsl2LineConfProfEntry OBJECT-TYPE SYNTAX Vdsl2LineConfProfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table vdsl2LineConfProfTable contains VDSL2 line profile configuration. The index of this entry is vdsl2LConfProfProfileName. A default profile with an index of 'DEFVAL' will always exist and its parameters will be set to vendor-specific values, unless otherwise specified in this document. " INDEX { IMPLIED vdsl2LConfProfProfileName } ::= { vdsl2LineConfProfTable 1 } Vdsl2LineConfProfEntry ::= SEQUENCE { vdsl2LConfProfProfileName OCTET STRING, vdsl2LConfProfScMaskDs Vdsl2ScMaskDs, vdsl2LConfProfScMaskUs Vdsl2ScMaskUs, vdsl2LConfProfRfiBands OCTET STRING, vdsl2LConfProfVDSLtoneblackout OCTET STRING, vdsl2LConfProfRaModeDs INTEGER, vdsl2LConfProfRaModeUs INTEGER, vdsl2LConfProfRaUsNrmDs Unsigned32, vdsl2LConfProfRaUsNrmUs Unsigned32, vdsl2LConfProfRaUsTimeDs Unsigned32, vdsl2LConfProfRaUsTimeUs Unsigned32, vdsl2LConfProfRaDsNrmsDs Unsigned32, vdsl2LConfProfRaDsNrmsUs Unsigned32, vdsl2LConfProfRaDsTimeDs Unsigned32, vdsl2LConfProfRaDsTimeUs Unsigned32, vdsl2LConfProfTargetSnrmDs Unsigned32, vdsl2LConfProfTargetSnrmUs Unsigned32, vdsl2LConfProfMaxSnrmDs Unsigned32, vdsl2LConfProfMaxSnrmUs Unsigned32, vdsl2LConfProfMinSnrmDs Unsigned32, vdsl2LConfProfMinSnrmUs Unsigned32, vdsl2LConfProfMsgMinUs Unsigned32, vdsl2LConfProfMsgMinDs Unsigned32, vdsl2LConfProfXtuTransSysEna Vdsl2TransmissionModeType, vdsl2LConfProfPmMode Vdsl2LConfProfPmMode, vdsl2LConfProfL0Time Unsigned32, vdsl2LConfProfL2Time Unsigned32, vdsl2LConfProfL2Atpr Unsigned32, vdsl2LConfProfL2Atprt Unsigned32, vdsl2LConfProfDpboEpsd Vdsl2DpboEpsd, vdsl2LConfProfDpboEsel Unsigned32, vdsl2LConfProfDpboEscm Vdsl2DpboEscm, vdsl2LConfProfDpboMus Unsigned32, vdsl2LConfProfDpboFmin Unsigned32, vdsl2LConfProfDpboFmax Unsigned32, vdsl2LConfProfUpboPsdBand Vdsl2UpboPsdBand, vdsl2LConfProfUpboKl Unsigned32, vdsl2LConfProfUpboKlf Vdsl2UpboKlf, vdsl2LConfProfRowStatus RowStatus, vdsl2LConfProfBitSwapDs Vdsl2BitSwap, vdsl2LConfProfBitSwapUs Vdsl2BitSwap, vdsl2LConfProfUpboBoostMode Vdsl2UpboBoostMode, vdsl2LConfProfDpboEselMin Unsigned32, vdsl2LConfProfUpboKl0RefBand Vdsl2UpboKl0RefBand, vdsl2LConfProfReferenceClock Vdsl2LineClockReferenceType, vdsl2LConfProfSosTimeDs Unsigned32, vdsl2LConfProfSosTimeUs Unsigned32, vdsl2LConfProfSosNtonesDs Unsigned32, vdsl2LConfProfSosNtonesUs Unsigned32, vdsl2LConfProfSosCrcDs Unsigned32, vdsl2LConfProfSosCrcUs Unsigned32, vdsl2LConfProfMaxSosDs Unsigned32, vdsl2LConfProfMaxSosUs Unsigned32, vdsl2LConfProfSnrmoffsetRocDs Unsigned32, vdsl2LConfProfSnrmoffsetRocUs Unsigned32, vdsl2LConfProfInpminRocDs Unsigned32, vdsl2LConfProfInpminRocUs Unsigned32, vdsl2LConfProfInmIatoDs Unsigned32, vdsl2LConfProfInmIatsDs Unsigned32, vdsl2LConfProfInmCcDs Unsigned32, vdsl2LConfProfInmInpeqModeDs Unsigned32, vdsl2LConfProfInmIatoUs Unsigned32, vdsl2LConfProfInmIatsUs Unsigned32, vdsl2LConfProfInmCcUs Unsigned32, vdsl2LConfProfInmInpeqModeUs Unsigned32, vdsl2LConfProfL3Time Unsigned32, vdsl2LConfProfRtxModeDs INTEGER, vdsl2LConfProfRtxModeUs INTEGER, vdsl2LConfProfLeftrThreshDs Unsigned32, vdsl2LConfProfLeftrThreshUs Unsigned32, vdsl2LConfProfForceInpDs TruthValue, vdsl2LConfProfForceInpUs TruthValue, vdsl2LConfProfAeleMode Unsigned32, vdsl2LConfProfUpboElmt Unsigned32, vdsl2LconfProfUpboKlAuto Unsigned32 } vdsl2LConfProfProfileName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object identifies a row in this table." ::= { vdsl2LineConfProfEntry 1 } vdsl2LConfProfScMaskDs OBJECT-TYPE SYNTAX Vdsl2ScMaskDs MAX-ACCESS read-create STATUS current DESCRIPTION "Sub-carriers mask. A bitmap of 512 bits that allows masking up to 512 downstream sub-carriers, depending on NSCds. If bit i (0 <= i < NSCds) is set to '1', the respective downstream sub-carrier i is masked, and if set to '0', the respective sub-carrier is unmasked. Note that there should always be unmasked sub-carriers (i.e., the object cannot be all 1's). Also note that if NSCds < 512, all bits i (NSCds i <= 512) should be set to '1'. " REFERENCE "ITU-T G.997.1, paragraph 7.3.1.2.6" ::= { vdsl2LineConfProfEntry 2 } vdsl2LConfProfScMaskUs OBJECT-TYPE SYNTAX Vdsl2ScMaskUs MAX-ACCESS read-create STATUS current DESCRIPTION "Sub-carriers mask. A bitmap of 64 bits that allows masking up to 64 downstream sub-carriers, depending on NSCds. If bit i (0 <= i < NSCus) is set to '1', the respective upstream sub-carrier i is masked, and if set to '0', the respective sub-carrier is unmasked. Note that there should always be unmasked sub-carriers (i.e., the object cannot be all 1's). Also note that if NSCus < 64, all bits i (NSCus < i <= 64) should be set to '1'. " REFERENCE "ITU-T G.997.1, paragraph 7.3.1.2.7" ::= { vdsl2LineConfProfEntry 3 } vdsl2LConfProfRfiBands OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..159)) MAX-ACCESS read-create STATUS current DESCRIPTION "The subset of PSD mask breakpoints that shall be used to notch an RFI band. It is a string of bands consist of begin tone index and end tone index. for example :0-10,20-50,100-4095 It can contain as most as 16 bands. " REFERENCE "ITU-T G.997.1(200604), paragraph 7.3.1.2.10" ::= { vdsl2LineConfProfEntry 4 } vdsl2LConfProfVDSLtoneblackout OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..79)) MAX-ACCESS read-create STATUS current DESCRIPTION "The subset of subcarriermask that shall be used to mask the subcarriers. It is a string of bands consist of begin tone index and end tone index. for example :0-10,20-50,100-4095 It can contain as most as 8 bands. " REFERENCE "ITU-T G.997.1(200604), paragraph 7.3.1.2.8" ::= { vdsl2LineConfProfEntry 5 } vdsl2LConfProfRaModeDs OBJECT-TYPE SYNTAX INTEGER { manual(1), rainit(2), dynamic(3), dynamicwithsos(4) } MAX-ACCESS read-create STATUS current DESCRIPTION "The mode of operation of a rate-adaptive xTU-C in the transmit direction. Options: 1. manual(1) - No Rate-Adaptation. The initialization process attempts to synchronize to a specified rate 2. rainit(2) - Rate-Adaptation during initialization process only, which attempts to synchronize to a rate between minimum and maximum specified values 3. dynamic(3) - Rate-Adaptation during show time 4. dynamicwithsos(4) - Rate-Adaptation during show time by SOS and SRA. In this mode, enabling of SOS and SRA is mandatory. " REFERENCE "ITU-T G.997.1, paragraph 7.3.1.4.1" DEFVAL { raInit } ::= { vdsl2LineConfProfEntry 6 } vdsl2LConfProfRaModeUs OBJECT-TYPE SYNTAX INTEGER { manual(1), rainit(2), dynamic(3), dynamicwithsos(4) } MAX-ACCESS read-create STATUS current DESCRIPTION "The mode of operation of a rate-adaptive xTU-R in the transmit direction. Options: 1. manual(1) - No Rate-Adaptation. The initialization process attempts to synchronize to a specified rate 2. rainit(2) - Rate-Adaptation during initialization process only, which attempts to synchronize to a rate between minimum and maximum specified values 3. dynamic(3) - Rate-Adaptation during show time 4. dynamicwithsos(4) - Rate-Adaptation during show time by SOS and SRA. In this mode, enabling of SOS and SRA is mandatory. " REFERENCE "ITU-T G.997.1, paragraph 7.3.1.4.2" DEFVAL { raInit } ::= { vdsl2LineConfProfEntry 7 } vdsl2LConfProfRaUsNrmDs OBJECT-TYPE SYNTAX Unsigned32(0..310) UNITS "0.1 dB" MAX-ACCESS read-create STATUS current DESCRIPTION "The Downstream Up-Shift Noise Margin value, to be used when Vdsl2LineConfRaModeDs is set to DynamicRa. If the downstream noise margin is above this value and stays above it for more than the time specified by the Vdsl2LineConfRaUsTimeDs, the xTU-R shall attempt to increase the downstream net data rate. The Downstream Up-shift Noise Margin ranges from 0 to 310 units of 0.1 dB (Physical values are 0 to 31 dB). Unit: 0.1 dB " REFERENCE "ITU-T G.997.1, paragraph 7.3.1.4.3" DEFVAL { 0 } ::= { vdsl2LineConfProfEntry 8 } vdsl2LConfProfRaUsNrmUs OBJECT-TYPE SYNTAX Unsigned32(0..310) UNITS "0.1 dB" MAX-ACCESS read-create STATUS current DESCRIPTION "The Upstream Up-Shift Noise Margin value, to be used when Vdsl2LineConfRaModeUs is set to DynamicRa. If the upstream noise margin is above this value and stays above it for more than the time specified by the Vdsl2LineConfRaUsTimeUs, the xTU-C shall attempt to increase the upstream net data rate. The Upstream Up-shift Noise Margin ranges from 0 to 310 units of 0.1 dB (Physical values are 0 to 31 dB). Unit: 0.1 dB " REFERENCE "ITU-T G.997.1, paragraph 7.3.1.4.4" DEFVAL { 0 } ::= { vdsl2LineConfProfEntry 9 } vdsl2LConfProfRaUsTimeDs OBJECT-TYPE SYNTAX Unsigned32(0..16383) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The Downstream Up-Shift Time Interval, to be used when Vdsl2LineConfRaModeDs is set to DynamicRa. The interval of time that the downstream noise margin should stay above the Downstream Up-shift Noise Margin before the xTU-R shall attempt to increase the downstream net data rate. The time interval ranges from 0 to 16383 seconds. Unit: seconds " REFERENCE "ITU-T G.997.1, paragraph 7.3.1.4.5" DEFVAL { 0 } ::= { vdsl2LineConfProfEntry 10 } vdsl2LConfProfRaUsTimeUs OBJECT-TYPE SYNTAX Unsigned32(0..16383) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The Upstream Up-Shift Time Interval, to be used when Vdsl2LineConfRaModeUs is set to DynamicRa. The interval of time the upstream noise margin should stay above the Upstream Up-shift Noise Margin before the xTU-C shall attempt to increase the upstream net data rate. Unit: seconds " REFERENCE "ITU-T G.997.1, paragraph 7.3.1.4.6" DEFVAL { 0 } ::= { vdsl2LineConfProfEntry 11 } vdsl2LConfProfRaDsNrmsDs OBJECT-TYPE SYNTAX Unsigned32(0..310) UNITS "0.1 dB" MAX-ACCESS read-create STATUS current DESCRIPTION "The Downstream Down-Shift Noise Margin value, to be used when Vdsl2LineConfRaModeDs is set to DynamicRa. If the downstream noise margin is below this value and stays below that for more than the time specified by the Vdsl2LineConfRaDsTimeDs, the xTU-R shall attempt to decrease the downstream net data rate. The Downstream Down-shift Noise Margin ranges from 0 to 310 units of 0.1 dB (Physical values are 0 to 31 dB). Unit: 0.1 dB " REFERENCE "ITU-T G.997.1, paragraph 7.3.1.4.7" DEFVAL { 0 } ::= { vdsl2LineConfProfEntry 12 } vdsl2LConfProfRaDsNrmsUs OBJECT-TYPE SYNTAX Unsigned32(0..310) UNITS "0.1 dB" MAX-ACCESS read-create STATUS current DESCRIPTION "The Upstream Downshift Noise Margin value, to be used when Vdsl2LineConfRaModeUs is set to DynamicRa. If the upstream noise margin is below this value and stays below that for more than the time specified by the Vdsl2LineConfRaDsTimeUs, the xTU-C shall attempt to decrease the upstream net data rate. The Upstream Down-shift Noise Margin ranges from 0 to 310 units of 0.1 dB (Physical values are 0 to 31 dB). Unit: 0.1 dB " REFERENCE "ITU-T G.997.1, paragraph 7.3.1.4.8" DEFVAL { 0 } ::= { vdsl2LineConfProfEntry 13 } vdsl2LConfProfRaDsTimeDs OBJECT-TYPE SYNTAX Unsigned32(0..16383) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The Downstream Downshift Time Interval, to be used when Vdsl2LineConfRaModeDs is set to DynamicRa. The interval of time the downstream noise margin should stay below the Downstream Down-shift Noise Margin before the xTU-R shall attempt to decrease the downstream net data rate. Unit: seconds " REFERENCE "ITU-T G.997.1, paragraph 7.3.1.4.9" DEFVAL { 0 } ::= { vdsl2LineConfProfEntry 14 } vdsl2LConfProfRaDsTimeUs OBJECT-TYPE SYNTAX Unsigned32(0..16383) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The Upstream Down-Shift Time Interval, to be used when Vdsl2LineConfRaModeUs is set to DynamicRa. The interval of time the upstream noise margin should stay below the Upstream Down-shift Noise Margin before the xTU-C shall attempt to decrease the upstream net data rate. Unit: seconds " REFERENCE "ITU-T G.997.1, paragraph 7.3.1.4.10" DEFVAL { 0 } ::= { vdsl2LineConfProfEntry 15 } vdsl2LConfProfTargetSnrmDs OBJECT-TYPE SYNTAX Unsigned32(0..310) UNITS "0.1 dB" MAX-ACCESS read-create STATUS current DESCRIPTION "The minimum Noise Margin the xTU-R receiver shall achieve, relative to the BER requirement for each of the downstream bearer channels, to successfully complete initialization. The target noise margin ranges from 0 to 310 units of 0.1 dB (Physical values are 0 to 31 dB). Unit: 0.1 dB " REFERENCE "ITU-T G.997.1, paragraph 7.3.1.3.1" DEFVAL { 60 } ::= { vdsl2LineConfProfEntry 16 } vdsl2LConfProfTargetSnrmUs OBJECT-TYPE SYNTAX Unsigned32(0..310) UNITS "0.1 dB" MAX-ACCESS read-create STATUS current DESCRIPTION "The minimum Noise Margin the xTU-C receiver shall achieve, relative to the BER requirement for each of the upstream bearer channels, to successfully complete initialization. The target noise margin ranges from 0 to 310 units of 0.1 dB (Physical values are 0 to 31 dB). Unit: 0.1 dB " REFERENCE "ITU-T G.997.1, paragraph 7.3.1.3.2" DEFVAL { 60 } ::= { vdsl2LineConfProfEntry 17 } vdsl2LConfProfMaxSnrmDs OBJECT-TYPE SYNTAX Unsigned32 UNITS "0.1 dB" MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum Noise Margin the xTU-R receiver shall try to sustain. If the Noise Margin is above this level, the xTU-R shall request that the xTU-C reduce the xTU-C transmit power to get a noise margin below this limit (if this functionality is supported). The maximum noise margin ranges from 0 to 310 units of 0.1 dB (Physical values are 0 to 31 dB). A value of all 1's means that there is no maximum. Unit: 0.1 dB " REFERENCE "ITU-T G.997.1, paragraph 7.3.1.3.3" DEFVAL { 300 } ::= { vdsl2LineConfProfEntry 18 } vdsl2LConfProfMaxSnrmUs OBJECT-TYPE SYNTAX Unsigned32 UNITS "0.1 dB" MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum Noise Margin the xTU-C receiver shall try to sustain. If the Noise Margin is above this level, the xTU-C shall request that the xTU-R reduce the xTU-R transmit power to get a noise margin below this limit (if this functionality is supported). The maximum noise margin ranges from 0 to 310 units of 0.1 dB (Physical values are 0 to 31 dB). A value of all 1's means that there is no maximum. Unit: 0.1 dB " REFERENCE "ITU-T G.997.1, paragraph 7.3.1.3.4" DEFVAL { 300 } ::= { vdsl2LineConfProfEntry 19 } vdsl2LConfProfMinSnrmDs OBJECT-TYPE SYNTAX Unsigned32(0..310) UNITS "0.1 dB" MAX-ACCESS read-create STATUS current DESCRIPTION "The minimum Noise Margin the xTU-R receiver shall tolerate. If the noise margin falls below this level, the xTU-R shall request that the xTU-C increase the xTU-C transmit power. If an increase to xTU-C transmit power is not possible, a loss-of-margin (LOM) defect occurs, the xTU-R shall fail and attempt to reinitialize and the NMS shall be notified. The minimum noise margin ranges from 0 to 310 units of 0.1 dB (Physical values are 0 to 31 dB). A value of 0 means that there is no minimum. Unit: 0.1 dB " REFERENCE "ITU-T G.997.1, paragraph 7.3.1.3.5" DEFVAL { 0 } ::= { vdsl2LineConfProfEntry 20 } vdsl2LConfProfMinSnrmUs OBJECT-TYPE SYNTAX Unsigned32(0..310) UNITS "0.1 dB" MAX-ACCESS read-create STATUS current DESCRIPTION "The minimum Noise Margin the xTU-C receiver shall tolerate. If the noise margin falls below this level, the xTU-C shall request that the xTU-R increase the xTU-R transmit power. If an increase of xTU-R transmit power is not possible, a loss-of-margin (LOM) defect occurs, the xTU-C shall fail and attempt to re-initialize and the NMS shall be notified. The minimum noise margin ranges from 0 to 310 units of 0.1 dB (Physical values are 0 to 31 dB). A value of 0 means that there is no minimum. Unit: 0.1 dB " REFERENCE "ITU-T G.997.1, paragraph 7.3.1.3.6" DEFVAL { 0 } ::= { vdsl2LineConfProfEntry 21 } vdsl2LConfProfMsgMinUs OBJECT-TYPE SYNTAX Unsigned32(4000..63000) UNITS "bits/second" MAX-ACCESS read-create STATUS current DESCRIPTION "Minimum Overhead Rate Upstream. Defines the minimum rate of the message-based overhead that shall be maintained by the xTU in upstream direction. Expressed in bits per second and ranges from 4000 to 63000 bps. Unit: bits/second " REFERENCE "ITU-T G.997.1, paragraph 7.3.1.5.1" DEFVAL { 4000 } ::= { vdsl2LineConfProfEntry 22 } vdsl2LConfProfMsgMinDs OBJECT-TYPE SYNTAX Unsigned32(4000..63000) UNITS "bits/second" MAX-ACCESS read-create STATUS current DESCRIPTION "Minimum Overhead Rate Downstream. Defines the minimum rate of the message-based overhead that shall be maintained by the xTU in downstream direction. Expressed in bits per second and ranges from 4000 to 63000 bps. Unit: bits/second " REFERENCE "ITU-T G.997.1, paragraph 7.3.1.5.2" DEFVAL { 4000 } ::= { vdsl2LineConfProfEntry 23 } vdsl2LConfProfXtuTransSysEna OBJECT-TYPE SYNTAX Vdsl2TransmissionModeType MAX-ACCESS read-create STATUS current DESCRIPTION "xTU Transmission System Enabling (XTSE). A list of the different coding types enabled in this profile. It is coded in a bit-map representation with 1 or more bits set. A bit set to '1' means that the XTUs may apply the respective coding for the VDSL line. A bit set to '0' means that the XTUs cannot apply the respective coding for the VDSL line. All 'reserved' bits should be set to '0'. " REFERENCE "ITU-T G.997.1, paragraph 7.3.1.1.1" ::= { vdsl2LineConfProfEntry 24 } vdsl2LConfProfPmMode OBJECT-TYPE SYNTAX Vdsl2LConfProfPmMode MAX-ACCESS read-create STATUS current DESCRIPTION "Power management state Enabling. Defines the power states the xTU-C or xTU-R may autonomously transition to on this line. Options: 1. allowTransitionsToIdle (0) 2. allowTransitionsToLowPower (1) A bit with a '1' value means that the xTU is allowed to transit into the respective state and a '0' value means that the xTU is not allowed to transit into the respective state. " REFERENCE "ITU-T G.997.1, paragraph 7.3.1.1.4" DEFVAL { { allowTransitionsToIdle, allowTransitionsToLowPower } } ::= { vdsl2LineConfProfEntry 25 } vdsl2LConfProfL0Time OBJECT-TYPE SYNTAX Unsigned32 (0..255) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "This minimum time (in seconds) between an Exit from the L2 state and the next Entry into the L2 state. Unit: seconds " REFERENCE "ITU-T G.997.1, paragraph 7.3.1.1.5" DEFVAL { 255 } ::= { vdsl2LineConfProfEntry 26 } vdsl2LConfProfL2Time OBJECT-TYPE SYNTAX Unsigned32 (0..255) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "This minimum time (in seconds) between an Entry into the L2 state and the first Power Trim in the L2 state and between two consecutive Power Trims in the L2 State. Unit: seconds " REFERENCE "ITU-T G.997.1, paragraph 7.3.1.1.6" DEFVAL { 30 } ::= { vdsl2LineConfProfEntry 27 } vdsl2LConfProfL2Atpr OBJECT-TYPE SYNTAX Unsigned32 (0..31) UNITS "dB" MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum aggregate transmit power reduction (in dB) that can be performed at transition of L0 to L2 state or through a single Power Trim in the L2 state. It ranges from 0 dB to 31 dB. Unit: dB " REFERENCE "ITU-T G.997.1 (amendment 1), 7.3.1.1.7" DEFVAL { 3 } ::= { vdsl2LineConfProfEntry 28 } vdsl2LConfProfL2Atprt OBJECT-TYPE SYNTAX Unsigned32 (0..31) UNITS "dB" MAX-ACCESS read-create STATUS current DESCRIPTION "The total maximum aggregate transmit power reduction (in dB) that can be performed in an L2 state. This is the sum of all reductions of L2 Request (i.e., at transition of L0 to L2 state) and Power Trims. Unit: dB " REFERENCE "ITU-T G.997.1 (amendment 1), 7.3.1.1.9" DEFVAL { 9 } ::= { vdsl2LineConfProfEntry 29 } vdsl2LConfProfDpboEpsd OBJECT-TYPE SYNTAX Vdsl2DpboEpsd MAX-ACCESS read-create STATUS current DESCRIPTION "This parameter defines the PSD mask that is assumed to be permitted at the exchange. This parameter shall use the same format as PSDMASKds.The maximum number of breakpoints for DPBOEPSD is 16. This is a string of 16 pairs of values in the following structure: Octets 0+1 - Index of 1st sub-carrier used in the context of a first breakpoint. Octet 2 - The PSD reduction for the sub-carrier indicated in octets 0 and 1. Octets 3-5 - Same, for a 2nd breakpoint. Octets 6-8 - Same, for a 3rd breakpoint. This architecture continues until octets 45-47, which are associated with a 16th breakpoint. Each subcarrier index is an unsigned number in the range 1 and NSCds. Each PSD reduction value is in the range 0 (0dBm/Hz) to 255 (-127.5dBm/Hz) with steps of 0.5dBm/Hz. Valid values are in the range 0 to 190 (0 to -95dBm/Hz). When the number of breakpoints is less than 16, all remaining octets are set to the value 0xff. " REFERENCE "ITU-T G.997.1(200604), paragraph 7.3.1.2.13" ::= { vdsl2LineConfProfEntry 30 } vdsl2LConfProfDpboEsel OBJECT-TYPE SYNTAX Unsigned32 (0..511) UNITS "0.5dB" MAX-ACCESS read-create STATUS current DESCRIPTION "This configuration parameter defines the assumed electrical length of cables (E-side cables) connecting exchange based DSL services to a remote flexibility point (cabinet), that hosts the xTU-C that is subject to spectrally shaped downstream power back-off depending on this length. For this parameter the electrical length is defined as the loss (in dB) of an equivalent length of hypothetical cable at a reference frequency defined by the network operator or in spectrum management regulations. DPBOESEL shall be coded as an unsigned integer representing an electrical length from 0 dB (coded as 0) to 255.5 dB (coded as 511) in steps of 0.5 dB. All values in the range are valid.If DPBOESEL is set to zero, the DPBO in this section shall be disabled. Unit: 0.5dB " REFERENCE "ITU-T G.997.1(200604), paragraph 7.3.1.2.13" ::= { vdsl2LineConfProfEntry 31 } vdsl2LConfProfDpboEscm OBJECT-TYPE SYNTAX Vdsl2DpboEscm MAX-ACCESS read-create STATUS current DESCRIPTION "This configuration parameter defines a cable model in terms of three scalars DPBOESCMA, DPBOESCMB and DPBOESCMC that shall be used to describe the frequency dependent loss of E-side cables.Parameters DPBOESCMA, DPBOESCMB, DPBOESCMC shall be coded as unsigned integers representing a scalar value from -1 (coded as 0) to 1.5 (coded as 640) in step of 1/256. All values in the range are valid. Octets 0+1 DPBOESCMA Octets 2+3 DPBOESCMB Octets 4+5 DPBOESCMC " REFERENCE "ITU-T G.997.1(200604), paragraph 7.3.1.2.13" ::= { vdsl2LineConfProfEntry 32 } vdsl2LConfProfDpboMus OBJECT-TYPE SYNTAX Unsigned32 (0..255) UNITS "-0.5dBm/Hz" MAX-ACCESS read-create STATUS current DESCRIPTION "DPBOMUS defines the assumed Minimum Usable receive Signal PSD (in dBm/Hz) for exchange based services, used to modify parameter DPBOFMAX defined below. It shall be coded as an unsigned integer representing a PSD level from 0 dBm/Hz (coded as 0) to -127.5 dBm/Hz (coded as 255) in steps of 0.5 dBm/Hz. All values in the range are valid. Unit: -0.5dBm/Hz " REFERENCE "ITU-T G.997.1(200604), paragraph 7.3.1.2.13" ::= { vdsl2LineConfProfEntry 33 } vdsl2LConfProfDpboFmin OBJECT-TYPE SYNTAX Unsigned32 (0..2048) UNITS "4.3125 KHz" MAX-ACCESS read-create STATUS current DESCRIPTION "DPBOFMIN defines the minimum frequency from which the DPBO shall be applied. It shall be coded as a 16 bits unsigned integer representing a frequency in multiple of 4.3125 KHz. The range of valid values is from 0 kHz (coded as 0) to 8832 kHz (coded as 2048). Unit: 4.3125 KHz " REFERENCE "ITU-T G.997.1(200604), paragraph 7.3.1.2.13" ::= { vdsl2LineConfProfEntry 34 } vdsl2LConfProfDpboFmax OBJECT-TYPE SYNTAX Unsigned32 (32..6956) UNITS "4.3125 KHz" MAX-ACCESS read-create STATUS current DESCRIPTION "DPBOFMAX defines the maximum frequency at which DPBO may be applied. It shall be coded as a 16 bits unsigned integer representing a frequency in multiple of 4.3125 KHz. The range of valid values is from 138 kHz (coded as 32) to 29997.75 kHz (coded as 6956). Unit: 4.3125 KHz " REFERENCE "ITU-T G.997.1(200604), paragraph 7.3.1.2.13" ::= { vdsl2LineConfProfEntry 35 } vdsl2LConfProfUpboPsdBand OBJECT-TYPE SYNTAX Vdsl2UpboPsdBand MAX-ACCESS read-create STATUS current DESCRIPTION "This parameter defines the UPBO reference PSD used to compute the upstream power back-off for each upstream band except US0. A UPBOPSD defined for each band shall consist of two parameters [a, b]. Parameter a shall be coded as an unsigned 12-bit number from 40 dBm/Hz (coded as 0) to 80.95 dBm/Hz (coded as 4095) in steps of 0.01 dBm/Hz; and b shall be coded as an unsigned 12 bit number from 0 (coded as 0) to 40.95 dBm/Hz (coded as 4095) in steps of 0.01 dBm/Hz. The UPBO reference PSD at the frequency f expressed in MHz shall be equal to '-a-b(SQRT(f))'. The set of parameter values a = 40 dBm/Hz, b = 0 dBm/Hz is a special configuration to disable UPBO in the respective upstream band. Octets 0+1 - a[0] Octets 2+3 - b[0] Octets 4+5 - a[1] Octets 6+7 - b[1] Octets 8+9 - a[2] Octets 10+11 - b[2] Octets 12+13 - a[3] Octets 14+15 - b[3] " REFERENCE "ITU-T G.997.1(200604), paragraph 7.3.1.2.14" ::= { vdsl2LineConfProfEntry 36 } vdsl2LConfProfUpboKl OBJECT-TYPE SYNTAX Unsigned32 (0..1280) UNITS "0.1 dB" MAX-ACCESS read-create STATUS current DESCRIPTION "This parameter defines the electrical loop length expressed in dB at 1MHz, kl0, configured by the CO-MIB. The value shall be coded as an unsigned 16 bit number in the range 0 (coded as 0) to 128 dB (coded as 1280) in steps of 0.1 dB. Unit: 0.1 dB " REFERENCE "ITU-T G.997.1(200604), paragraph 7.3.1.2.14" ::= { vdsl2LineConfProfEntry 37 } vdsl2LConfProfUpboKlf OBJECT-TYPE SYNTAX Vdsl2UpboKlf MAX-ACCESS read-create STATUS current DESCRIPTION "This parameter is a flag that forces the VTU-R to use the electrical loop length of the CO-MIB (UPBOKL) to compute the UPBO. The value shall be forced if the flag is set to 1. Otherwise, the electrical loop length shall be autonomously selected by the VTU-O. " REFERENCE "ITU-T G.997.1(200604), paragraph 7.3.1.2.14" ::= { vdsl2LineConfProfEntry 38 } vdsl2LConfProfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. When 'active' is set, the system will validate the profile. Before a profile can be deleted or taken out of service (by setting this object to 'destroy' or 'outOfService'), it must be not referenced from all associated templates. " ::= { vdsl2LineConfProfEntry 39 } vdsl2LConfProfReferenceClock OBJECT-TYPE SYNTAX Vdsl2LineClockReferenceType MAX-ACCESS read-create STATUS current DESCRIPTION "This object configures the clock reference for the ATU-C in a VDSL Line. " DEFVAL { freeRun } ::= { vdsl2LineConfProfEntry 65534 } vdsl2LConfProfBitSwapDs OBJECT-TYPE SYNTAX Vdsl2BitSwap MAX-ACCESS read-create STATUS current DESCRIPTION "Enables or disables the bit swap downstream of a line." DEFVAL { enable } ::= { vdsl2LineConfProfEntry 65535 } vdsl2LConfProfBitSwapUs OBJECT-TYPE SYNTAX Vdsl2BitSwap MAX-ACCESS read-create STATUS current DESCRIPTION "Enables or disables the bit swap upstream of a line." DEFVAL { enable } ::= { vdsl2LineConfProfEntry 65536 } vdsl2LConfProfUpboBoostMode OBJECT-TYPE SYNTAX Vdsl2UpboBoostMode MAX-ACCESS read-create STATUS current DESCRIPTION "Options: 1. disable(1) - The Equalized FEXT UPBO method is not supported 2. enable(2) - The Equalized FEXT UPBO method is supported " DEFVAL { enable } ::= { vdsl2LineConfProfEntry 65537 } vdsl2LConfProfDpboEselMin OBJECT-TYPE SYNTAX Unsigned32 (0..511) UNITS "0.5dB" MAX-ACCESS read-create STATUS current DESCRIPTION "DPBOESELMIN in dB is the minimum of all main cable losses for the KVz supplied when using the SOL model (expansion of a KVz and VDSL2 provision of additional KVz areas from this KVz using cross-cables to additional KVz), including the KVz at the MSAN site. This value must be adjustable as the minimum requirement via the SNMP interface in the configuration profile for each VDSL2 port, and is set individually for each MSAN site and usage. As an option, As an option, adjustment can be done for each MSAN or line card, thus taking effect for entire port groups. It is used only for determining the MUF. Unit: 0.5 dB " ::= { vdsl2LineConfProfEntry 65538 } vdsl2LConfProfUpboKl0RefBand OBJECT-TYPE SYNTAX Vdsl2UpboKl0RefBand MAX-ACCESS read-create STATUS current DESCRIPTION "Octets 0+1 - length[1] Octets 2+3 - length[2] Octets 4+5 - length[3] Octets 6+7 - length[4] " REFERENCE "This parameter defines the UPBO reference electrical length used to compute the upstream power back-off for each upstream band except US0, for the optional Equalized FEXT UPBO method. The value ranges from 1.8 to 63.5 dB in steps of 0.1 dB with special value 0.The special value 0 indicates optional Equalized FEXT UPBO method is not supported. " ::= { vdsl2LineConfProfEntry 65539 } vdsl2LConfProfSosTimeDs OBJECT-TYPE SYNTAX Unsigned32 (0..255) UNITS "64ms" MAX-ACCESS read-create STATUS current DESCRIPTION "The parameter is used in the specification of the receiver initiated SOS. If the value of this parameter is not zero, the standard SOS triggering criteria are enabled, and the value corresponds with duration of the time window used in the standard SOS triggering criteria in the downstream direction.The special value zero, indicates that the standard SOS triggering criteria are disabled. The valid range of non-zero values is from 64 ms to (255*64) ms in steps of 64ms. Unit: 64ms " REFERENCE "ITU-T G.997.1(200811), paragraph 7.3.1.10.1" ::= { vdsl2LineConfProfEntry 65540 } vdsl2LConfProfSosTimeUs OBJECT-TYPE SYNTAX Unsigned32 (0..255) UNITS "64ms" MAX-ACCESS read-create STATUS current DESCRIPTION "The parameter is used in the specification of the receiver initiated SOS. If the value of this parameter is not zero, the standard SOS triggering criteria are enabled, and the value corresponds with duration of the time window used in the standard SOS triggering criteria in the upstream direction.The special value zero, indicates that the standard SOS triggering criteria are disabled. The valid range of non-zero values is from 64 ms to (255*64) ms in steps of 64ms. Unit: 64ms " REFERENCE "ITU-T G.997.1(200811), paragraph 7.3.1.10.2" ::= { vdsl2LineConfProfEntry 65541 } vdsl2LConfProfSosNtonesDs OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-create STATUS current DESCRIPTION "This parameter is defined as the minimum percentage of tones in the downstream MEDLEY SET that must be degraded in order to arm the first sub-condition of the standard SOS triggering criteria in the downstream direction. The parameter SOS-NTONES-ds is defined as a percentage of tones. The valid range of values is from 1 to 100 in steps of 1. A special value of 0 indicates that this parameter is not used in the decision criteria. " REFERENCE "ITU-T G.997.1(200811), paragraph 7.3.1.10.3" ::= { vdsl2LineConfProfEntry 65542 } vdsl2LConfProfSosNtonesUs OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-create STATUS current DESCRIPTION "This parameter is defined as the minimum percentage of tones in the upstream MEDLEY SET that must be degraded in order to arm the first sub-condition of the standard SOS triggering criteria in the downstream direction. The parameter SOS-NTONES-ds is defined as a percentage of tones. The valid range of values is from 1 to 100 in steps of 1. A special value of 0 indicates that this parameter is not used in the decision criteria. " REFERENCE "ITU-T G.997.1(200811), paragraph 7.3.1.10.4" ::= { vdsl2LineConfProfEntry 65543 } vdsl2LConfProfSosCrcDs OBJECT-TYPE SYNTAX Unsigned32 (1..65535) UNITS "0.02" MAX-ACCESS read-create STATUS current DESCRIPTION "This parameter is defined as the minimum number of normalized CRC anomalies received in SOS-TIME-ds seconds in order to arm the second sub-condition of the standard SOS triggering criteria in the downstream direction. The valid range of SOS-CRC values is 0.02 to 65535*0.02, in steps of 0.02. Unit: 0.02 " REFERENCE "ITU-T G.997.1(200811), paragraph 7.3.1.10.5" ::= { vdsl2LineConfProfEntry 65544 } vdsl2LConfProfSosCrcUs OBJECT-TYPE SYNTAX Unsigned32 (1..65535) UNITS "0.02" MAX-ACCESS read-create STATUS current DESCRIPTION "This parameter is defined as the minimum number of normalized CRC anomalies received in SOS-TIME-ds seconds in order to arm the second sub-condition of the standard SOS triggering criteria in the upstream direction. The valid range of SOS-CRC values is 0.02 to 65535*0.02, in steps of 0.02. Unit: 0.02 " REFERENCE "ITU-T G.997.1(200811), paragraph 7.3.1.10.6" ::= { vdsl2LineConfProfEntry 65545 } vdsl2LConfProfMaxSosDs OBJECT-TYPE SYNTAX Unsigned32 (0..15) MAX-ACCESS read-create STATUS current DESCRIPTION "This parameter is used in G.993.2 de-activation. If the number of successful SOS procedures in the downstream direction performed within a 120-second interval exceeds MAX-SOS-ds, the modem shall transition to the L3 state. The valid range of values is 1 to 15. A special value of 0 indicates that there is no limit on the maximum allowed number of SOS recoveries within this time interval. " REFERENCE "ITU-T G.997.1(200811), paragraph 7.3.1.10.7" ::= { vdsl2LineConfProfEntry 65546 } vdsl2LConfProfMaxSosUs OBJECT-TYPE SYNTAX Unsigned32 (0..15) MAX-ACCESS read-create STATUS current DESCRIPTION "This parameter is used in G.993.2 de-activation. If the number of successful SOS procedures in the upstream direction performed within a 120-second interval exceeds MAX-SOS-ds, the modem shall transition to the L3 state. The valid range of values is 1 to 15. A special value of 0 indicates that there is no limit on the maximum allowed number of SOS recoveries within this time interval. " REFERENCE "ITU-T G.997.1(200811), paragraph 7.3.1.10.8" ::= { vdsl2LineConfProfEntry 65547 } vdsl2LConfProfSnrmoffsetRocDs OBJECT-TYPE SYNTAX Unsigned32 (0..310) UNITS "0.1dB" MAX-ACCESS read-create STATUS current DESCRIPTION "The parameter is defined as the SNR Margin offset for the ROC channel in the downstream direction. The parameter is used in the specification of the Channel Initialization Policy (see 12.3.7.1/G.993.2). The valid range of SNR margin offset values is from 0 to (310*0.1) dB with 0.1 dB steps. Unit: 0.1dB " REFERENCE "ITU-T G.997.1(200811), paragraph 7.3.1.10.9" ::= { vdsl2LineConfProfEntry 65548 } vdsl2LConfProfSnrmoffsetRocUs OBJECT-TYPE SYNTAX Unsigned32 (0..310) UNITS "0.1dB" MAX-ACCESS read-create STATUS current DESCRIPTION "The parameter is defined as the SNR Margin offset for the ROC channel in the upstream direction. The parameter is used in the specification of the Channel Initialization Policy (see 12.3.7.1/G.993.2). The valid range of SNR margin offset values is from 0 to (310*0.1) dB with 0.1 dB steps. Unit: 0.1dB " REFERENCE "ITU-T G.997.1(200811), paragraph 7.3.1.10.10" ::= { vdsl2LineConfProfEntry 65549 } vdsl2LConfProfInpminRocDs OBJECT-TYPE SYNTAX Unsigned32 (0..16) MAX-ACCESS read-create STATUS current DESCRIPTION "This parameter contains the minimum impulse noise protection to apply on the ROC in the downstream direction. The minimum impulse noise protection is an integer ranging from 0 to 16. " REFERENCE "ITU-T G.997.1(200811), paragraph 7.3.1.10.11" ::= { vdsl2LineConfProfEntry 65550 } vdsl2LConfProfInpminRocUs OBJECT-TYPE SYNTAX Unsigned32 (0..16) MAX-ACCESS read-create STATUS current DESCRIPTION "This parameter contains the minimum impulse noise protection to apply on the robust ROC in the upstream direction. The minimum impulse noise protection is an integer ranging from 0 to 16. " REFERENCE "ITU-T G.997.1(200811), paragraph 7.3.1.10.12" ::= { vdsl2LineConfProfEntry 65551 } vdsl2LConfProfInmIatoDs OBJECT-TYPE SYNTAX Unsigned32(3..511) MAX-ACCESS read-create STATUS current DESCRIPTION "The parameter of downstream impulse noise monitoring inter arrival time offset. This is the Inter Arrival Time Offset that the xTU receiver shall use to determine in which bin of the Inter Arrival Time histogram the IAT is reported. The valid values for INMIATO ranges from 3 to 511 DMT symbols in steps of 1 DMT symbol. " REFERENCE "ITU-T G.997.1, paragraph 7.3.1.9.1" DEFVAL { 3 } ::= { vdsl2LineConfProfEntry 65552 } vdsl2LConfProfInmIatsDs OBJECT-TYPE SYNTAX Unsigned32(0..7) MAX-ACCESS read-create STATUS current DESCRIPTION "The parameter of downstream impulse noise monitoring inter arrival time step. This is the Inter Arrival Time Step that the xTU receiver shall use to determine in which bin of the Inter Arrival Time histogram the IAT is reported. The valid values for INMIATS ranges from 0 to 7 in steps of 1. " REFERENCE "ITU-T G.997.1, paragraph 7.3.1.9.2" DEFVAL { 0 } ::= { vdsl2LineConfProfEntry 65553 } vdsl2LConfProfInmCcDs OBJECT-TYPE SYNTAX Unsigned32(0..64) MAX-ACCESS read-create STATUS current DESCRIPTION "The parameter of Downstream impulse noise monitoring cluster continuation value. This is the Cluster Continuation value that the xTU receiver shall use in the cluster indication process described in the relevant ITU-T Recommendation. The valid values for INMCC range from 0 to 64 DMT symbols in steps of 1 DMT symbol. " REFERENCE "ITU-T G.997.1, paragraph 7.3.1.9.3" DEFVAL { 0 } ::= { vdsl2LineConfProfEntry 65554 } vdsl2LConfProfInmInpeqModeDs OBJECT-TYPE SYNTAX Unsigned32(0..4) MAX-ACCESS read-create STATUS current DESCRIPTION "The parameter of Downstream impulse noise monitoring equivalent impulse noise protect mode. This is the INM Equivalent INP Mode that the xTU receiver shall use in the computation of the Equivalent INP, as defined in the relevant ITU-T Recommendation. The valid values for INM_INPEQ_MODE are 0, 1, 2, 3, and 4. " REFERENCE "ITU-T G.997.1, paragraph 7.3.1.9.4" DEFVAL { 0 } ::= { vdsl2LineConfProfEntry 65555 } vdsl2LConfProfInmIatoUs OBJECT-TYPE SYNTAX Unsigned32(3..511) MAX-ACCESS read-create STATUS current DESCRIPTION "The parameter of upstream impulse noise monitoring inter arrival time offset. This is the Inter Arrival Time Offset that the xTU receiver shall use to determine in which bin of the Inter Arrival Time histogram the IAT is reported. The valid values for INMIATO ranges from 3 to 511 DMT symbols in steps of 1 DMT symbol. " REFERENCE "ITU-T G.997.1, paragraph 7.3.1.9.1" DEFVAL { 3 } ::= { vdsl2LineConfProfEntry 65556 } vdsl2LConfProfInmIatsUs OBJECT-TYPE SYNTAX Unsigned32(0..7) MAX-ACCESS read-create STATUS current DESCRIPTION "The parameter of upstream impulse noise monitoring inter arrival time step. This is the Inter Arrival Time Step that the xTU receiver shall use to determine in which bin of the Inter Arrival Time histogram the IAT is reported. The valid values for INMIATS ranges from 0 to 7 in steps of 1. " REFERENCE "ITU-T G.997.1, paragraph 7.3.1.9.2" DEFVAL { 0 } ::= { vdsl2LineConfProfEntry 65557 } vdsl2LConfProfInmCcUs OBJECT-TYPE SYNTAX Unsigned32(0..64) MAX-ACCESS read-create STATUS current DESCRIPTION "The parameter of upstream impulse noise monitoring cluster continuation value. This is the Cluster Continuation value that the xTU receiver shall use in the cluster indication process described in the relevant ITU-T Recommendation. The valid values for INMCC range from 0 to 64 DMT symbols in steps of 1 DMT symbol. " REFERENCE "ITU-T G.997.1, paragraph 7.3.1.9.3" DEFVAL { 0 } ::= { vdsl2LineConfProfEntry 65558 } vdsl2LConfProfInmInpeqModeUs OBJECT-TYPE SYNTAX Unsigned32(0..4) MAX-ACCESS read-create STATUS current DESCRIPTION "The parameter of upstream impulse noise monitoring equivalent impulse noise protect mode. This is the INM Equivalent INP Mode that the xTU receiver shall use in the computation of the Equivalent INP, as defined in the relevant ITU-T Recommendation. The valid values for INM_INPEQ_MODE are 0, 1, 2, 3, and 4. " REFERENCE "ITU-T G.997.1, paragraph 7.3.1.9.4" DEFVAL { 0 } ::= { vdsl2LineConfProfEntry 65559 } vdsl2LConfProfL3Time OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "This minimum time (in seconds) between an Entry into the L3 state and the L0 or L2 state. Unit: seconds " DEFVAL { 255 } ::= { vdsl2LineConfProfEntry 65560 } vdsl2LConfProfRtxModeDs OBJECT-TYPE SYNTAX INTEGER { forbidden(0), preferred(1), forced(2), testmode(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "The mode of operation of G.998.4 retransmission in downstream direction. Options: 1. forbidden(0) - G.998.4 retransmission not allowed. 2. preferred(1) - G.998.4 retransmission is preferred. 3. forced(2) - Force the use of the G.998.4 retransmission. 4. testmode(3) - Force the use of the G.998.4 retransmission in test mode. " REFERENCE "ITU-T G.997.1, paragraph 7.3.1.11" DEFVAL { forbidden } ::= { vdsl2LineConfProfEntry 65561 } vdsl2LConfProfRtxModeUs OBJECT-TYPE SYNTAX INTEGER { forbidden(0), preferred(1), forced(2), testmode(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "The mode of operation of G.998.4 retransmission in upstream direction. Options: 1. forbidden(0) - G.998.4 retransmission not allowed. 2. preferred(1) - G.998.4 retransmission is preferred. 3. forced(2) - Force the use of the G.998.4 retransmission. 4. testmode(3) - Force the use of the G.998.4 retransmission in test mode. " REFERENCE "ITU-T G.997.1, paragraph 7.3.1.11" DEFVAL { forbidden } ::= { vdsl2LineConfProfEntry 65562 } vdsl2LConfProfLeftrThreshDs OBJECT-TYPE SYNTAX Unsigned32(0..99) UNITS "0.01" MAX-ACCESS read-create STATUS current DESCRIPTION "If retransmission is used in downstream direction, this parameter specifies the threshold for declaring a near-end leftr defect. The value is coded as a fraction of the NDR with valid range from 0.01 to 0.99 with increments of 0.01. A special value means the ETR shall be used as the default threshold for declaring a leftr defect. " REFERENCE "ITU-T G.997.1, paragraph 7.3.1.12" DEFVAL { 0 } ::= { vdsl2LineConfProfEntry 65563 } vdsl2LConfProfLeftrThreshUs OBJECT-TYPE SYNTAX Unsigned32(0..99) UNITS "0.01" MAX-ACCESS read-create STATUS current DESCRIPTION "If retransmission is used in upstream direction, this parameter specifies the threshold for declaring a near-end leftr defect. The value is coded as a fraction of the NDR with valid range from 0.01 to 0.99 with increments of 0.01. A special value means the ETR shall be used as the default threshold for declaring a leftr defect. " REFERENCE "ITU-T G.997.1, paragraph 7.3.1.12" DEFVAL { 0 } ::= { vdsl2LineConfProfEntry 65564 } vdsl2LConfProfForceInpDs OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This parameter indicates that the framer settings of the bearer shall be selected such that the impulse noise protection computed according to the formula specified in the relevant Recommendation is greater or equal to the minimal impulse noise protection requirement. This flag shall have the same value for all the bearers of one line in the same direction. " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.5" DEFVAL { false } ::= { vdsl2LineConfProfEntry 65565 } vdsl2LConfProfForceInpUs OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This parameter indicates that the framer settings of the bearer shall be selected such that the impulse noise protection computed according to the formula specified in the relevant Recommendation is greater or equal to the minimal impulse noise protection requirement. This flag shall have the same value for all the bearers of one line in the same direction. " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.5" DEFVAL { false } ::= { vdsl2LineConfProfEntry 65566 } vdsl2LConfProfAeleMode OBJECT-TYPE SYNTAX Unsigned32(0..3) MAX-ACCESS read-create STATUS current DESCRIPTION "This parameter defines the UPBO electrical length estimation mode to be used in the Alternative Electrical Length Estimation method (ELE-M1) in 7.2.1.3.2.2/G.993.2. The value of this parameter is 0, 1, 2 or 3. 0-ELE_M0, 1-ELE_DS, 2-ELE_PB, 3-ELE_MIN " REFERENCE "ITU-T G.997.1, paragraph 7.3.1.2.14" DEFVAL { 0 } ::= { vdsl2LineConfProfEntry 65567 } vdsl2LConfProfUpboElmt OBJECT-TYPE SYNTAX Unsigned32(0..15) MAX-ACCESS read-create STATUS current DESCRIPTION "This parameter defines the UPBO electrical length minimum threshold percentile in percent used in the Alternative Electrical Length Estimation method (ELE-M1) in clause 7.2.1.3.2.2/G.993.2. It is set by network management via the CO-MIB. The parameter ranges from 0 to 15 percent in steps of 1 percent. This value is communicated to the VTU-R via G.994.1 at start-up. " REFERENCE "ITU-T G.997.1, paragraph 7.3.1.2.14" DEFVAL { 10 } ::= { vdsl2LineConfProfEntry 65568 } vdsl2LconfProfUpboKlAuto OBJECT-TYPE SYNTAX Unsigned32(1..4 | 4294967295) MAX-ACCESS read-create STATUS current DESCRIPTION "This parameter defines the mode in which kl0 is computed when vdsl2LconfProfUpboKlf is auto. Options: 1--max(kl0_CO,kl0_CPE) 2--min(kl0_CO,kl0_CPE) 3--kl0_CO 4--kl0_CPE 4294967295--Invalid value " DEFVAL { 1 } ::= { vdsl2LineConfProfEntry 65569 } -- vdsl2LineConfProfModeSpecTable vdsl2LineConfProfModeSpecTable OBJECT-TYPE SYNTAX SEQUENCE OF Vdsl2LineConfProfModeSpecEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table vdsl2LineConfProfModeSpecTable extends the VDSL2 line configuration profile by VDSL Mode Specific parameters. A row in this table that has an index of vdsl2LconfProfVdslMode == defMode(1), is called a 'mandatory' row. A row in this table that has an index such that vdsl2LconfProfVdslMode is not equal to defMode(1), is called an 'optional' row. When a row in the vdsl2LineConfProfTable table (the parent row) is created, the SNMP agent will automatically create a 'mandatory' row in this table. When the parent row is deleted, the SNMP agent will automatically delete all associated rows in this table. Any attempt to delete the 'mandatory' row using the vdsl2LConfProfModeSpecRowStatus attribute will be rejected by the SNMP agent. The manager MAY create an 'optional' row in this table using the vdsl2LConfProfModeSpecRowStatus attribute if the parent row exists. The manager MAY delete an 'optional' row in this table using the vdsl2LConfProfModeSpecRowStatus attribute at any time. If the actual transmission mode of a DSL line does not match one of the 'optional' rows in this table, then the line will use the PSD configuration from the 'mandatory' row. The indexes of this table are vdsl2LConfProfProfileName and vdsl2LconfProfVdslMode. " ::= { vdsl2ProfileLine 3 } vdsl2LineConfProfModeSpecEntry OBJECT-TYPE SYNTAX Vdsl2LineConfProfModeSpecEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table vdsl2LineConfProfModeSpecTable extends the VDSL2 line configuration profile by VDSL Mode Specific parameters. A row in this table that has an index of vdsl2LconfProfVdslMode == defMode(1), is called a 'mandatory' row. A row in this table that has an index such that vdsl2LconfProfVdslMode is not equal to defMode(1), is called an 'optional' row. When a row in the vdsl2LineConfProfTable table (the parent row) is created, the SNMP agent will automatically create a 'mandatory' row in this table. When the parent row is deleted, the SNMP agent will automatically delete all associated rows in this table. Any attempt to delete the 'mandatory' row using the vdsl2LConfProfModeSpecRowStatus attribute will be rejected by the SNMP agent. The manager MAY create an 'optional' row in this table using the vdsl2LConfProfModeSpecRowStatus attribute if the parent row exists. The manager MAY delete an 'optional' row in this table using the vdsl2LConfProfModeSpecRowStatus attribute at any time. If the actual transmission mode of a DSL line does not match one of the 'optional' rows in this table, then the line will use the PSD configuration from the 'mandatory' row. The indexes of this entry are vdsl2LConfProfProfileName and vdsl2LconfProfVdslMode. " INDEX { vdsl2LConfProfProfileName, vdsl2LconfProfVdslMode } ::= { vdsl2LineConfProfModeSpecTable 1 } Vdsl2LineConfProfModeSpecEntry ::= SEQUENCE { vdsl2LconfProfVdslMode Vdsl2OperationModes, vdsl2LConfProfMaxNomPsdDs Integer32, vdsl2LConfProfMaxNomPsdUs Integer32, vdsl2LConfProfMaxNomAtpDs Unsigned32, vdsl2LConfProfMaxNomAtpUs Unsigned32, vdsl2LConfProfMaxAggRxPwrUs Integer32, vdsl2LConfProfPsdMaskDs Vdsl2PsdMaskDs, vdsl2LConfProfPsdMaskUs Vdsl2PsdMaskUs, vdsl2LConfProfPsdMaskSelectUs Unsigned32, vdsl2LConfProfPSDClassMask Vdsl2PSDClassMask, vdsl2LConfProfProfiles Vdsl2Profiles, vdsl2LConfProfBandOptUsage Vdsl2BandOptUsage, vdsl2LConfProfModeSpecRowStatus RowStatus, hwVdsl2ConfProfVirtualNoiseModeDs Vdsl2VirtualNoise, hwVdsl2ConfProfVirtualNoiseModeUs Vdsl2VirtualNoise, hwVdsl2ConfProfVirtualNoiseDs Vdsl2VirtualNoiseDs, hwVdsl2ConfProfVirtualNoiseUs Vdsl2VirtualNoiseUs, hwVdsl2ConfProfAutoProfile Vdsl2AutoProfile } vdsl2LconfProfVdslMode OBJECT-TYPE SYNTAX Vdsl2OperationModes MAX-ACCESS not-accessible STATUS current DESCRIPTION "The VDSL Mode is a way of categorizing the various VDSL transmission modes into groups, each group (VDSL Mode) shares the same PSD configuration. There should be multiple entries in this table for a given line profile in case multiple bits are set in vdsl2LConfProfXtuTransSysEna for that profile. " REFERENCE "DSL Forum TR-90, paragraph 5.1.8" ::= { vdsl2LineConfProfModeSpecEntry 1 } vdsl2LConfProfMaxNomPsdDs OBJECT-TYPE SYNTAX Integer32(-600..-300) UNITS "0.1 dBm/Hz" MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum nominal transmit PSD in the downstream direction during initialization and Showtime. It ranges from -600 to -300 units of 0.1 dBm/Hz. (physical values are -60 to -30 dBm/Hz). Unit: 0.1 dBm/Hz " REFERENCE "ITU-T G.997.1, paragraph 7.3.1.2" DEFVAL { -300 } ::= { vdsl2LineConfProfModeSpecEntry 2 } vdsl2LConfProfMaxNomPsdUs OBJECT-TYPE SYNTAX Integer32(-600..-300) UNITS "0.1 dBm/Hz" MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum nominal transmit PSD in the upstream direction during initialization and Showtime. It ranges from -600 to -300 units of 0.1 dBm/Hz. (physical values are -60 to -30 dBm/Hz). Unit: 0.1 dBm/Hz " REFERENCE "ITU-T G.997.1, paragraph 7.3.1.2" DEFVAL { -300 } ::= { vdsl2LineConfProfModeSpecEntry 3 } vdsl2LConfProfMaxNomAtpDs OBJECT-TYPE SYNTAX Unsigned32 (0..510) UNITS "0.1 dBm" MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum nominal aggregate transmit power in the downstream direction during initialization and Showtime. It ranges from 0 to 510 units of 0.1 dBm (0 to 255 physical values are 0 to 25.5 dBm, 256 to 510 physical values are -25.5 to -0.1 dBm). Unit: 0.1 dBm " REFERENCE "ITU-T G.997.1, paragraph 7.3.1.2" DEFVAL { 145 } ::= { vdsl2LineConfProfModeSpecEntry 4 } vdsl2LConfProfMaxNomAtpUs OBJECT-TYPE SYNTAX Unsigned32 (0..510) UNITS "0.1 dBm" MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum nominal aggregate transmit power in the upstream direction during initialization and Showtime. It ranges from 0 to 510 units of 0.1 dBm (0 to 255 physical values are 0 to 25.5 dBm, 256 to 510 physical values are -25.5 to -0.1 dBm). Unit: 0.1 dBm " REFERENCE "ITU-T G.997.1, paragraph 7.3.1.2" DEFVAL { 145 } ::= { vdsl2LineConfProfModeSpecEntry 5 } vdsl2LConfProfMaxAggRxPwrUs OBJECT-TYPE SYNTAX Integer32(-255..255) UNITS "0.1 dBm" MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum upstream aggregate receive power over the relevant set of sub-carriers. The xTU-C should verify that the upstream power cutback is such that this maximum aggregate receive power value is honored. It ranges from -255 to 255 units of 0.1 dBm (physical values are -25.5 to 25.5 dBm). A value of all means that there is no limit. Unit: 0.1 dBm " REFERENCE "ITU-T G.997.1, paragraph 7.3.1.2" DEFVAL { 255 } ::= { vdsl2LineConfProfModeSpecEntry 6 } vdsl2LConfProfPsdMaskDs OBJECT-TYPE SYNTAX Vdsl2PsdMaskDs MAX-ACCESS read-create STATUS current DESCRIPTION "This configuration parameter defines the downstream PSD mask applicable at the U C2 reference point. This MIB PSD mask may impose PSD restrictions in addition to the Limit PSD mask defined in the relevant Recommendation (e.g., G.992.5, G.993.2). This is a string of 32 pairs of values in the following structure: Octets 0+1 - Index of 1st sub-carrier used in the context of a first breakpoint. Octet 2 - The PSD reduction for the sub-carrier indicated in octets 0 and 1. Octets 3-5 - Same, for a 2nd breakpoint. Octets 6-8 - Same, for a 3rd breakpoint. This architecture continues until octets 94-95, which are associated with a 32nd breakpoint. Each subcarrier index is an unsigned number in the range 0 and (NSCds - 1). Each PSD reduction value is in the range 0 (0dBm/Hz) to 255 (-127.5dBm/Hz) with steps of 0.5dBm/Hz. Valid values are in the range 0 to 190 (0 to -95dBm/Hz). When the number of breakpoints is less than 32, all remaining octets are set to the value 0xff. Note that the content of this object should be correlated with the sub-carriers mask and with the RFI setup. " REFERENCE "ITU-T G.997.1(200604), paragraph 7.3.1.2.9" ::= { vdsl2LineConfProfModeSpecEntry 7 } vdsl2LConfProfPsdMaskUs OBJECT-TYPE SYNTAX Vdsl2PsdMaskUs MAX-ACCESS read-create STATUS current DESCRIPTION "This configuration parameter defines the upstream PSD mask applicable at the U R2 reference point. This MIB PSD mask may impose PSD restrictions in addition to the Limit PSD mask defined in the relevant Recommendations (e.g., ITU-T Recommendations G.992.3, G.993.2). This is a string of 16 pairs of values in the following structure: Octets 0+1 - Index of 1st sub-carrier used in the context of a first breakpoint. Octet 2 - The PSD reduction for the sub-carrier indicated in octets 0 and 1. Octets 3-5 - Same, for a 2nd breakpoint. Octets 45-47 - Same, for a 3rd breakpoint. This architecture continues until octets 45-47, which are associated with a 16th breakpoint. Each subcarrier index is an unsigned number in the range 0 and (NSCus - 1). Each PSD reduction value is in the range 0 (0dBm/Hz) to 255 (-127.5dBm/Hz) with steps of 0.5dBm/Hz. Valid values are in the range 0 to 190 (0 to -95dBm/Hz). When the number of breakpoints is less than 16, all remaining octets are set to the value 0xff. Note that the content of this object should be correlated with the sub-carriers mask and with the RFI setup. " REFERENCE "ITU-T G.997.1(200604), paragraph 7.3.1.2.12" ::= { vdsl2LineConfProfModeSpecEntry 8 } vdsl2LConfProfPsdMaskSelectUs OBJECT-TYPE SYNTAX Unsigned32(0..9) MAX-ACCESS read-create STATUS current DESCRIPTION "The selected upstream PSD mask. This parameter is used only for annexes J and M of G.992.3 and G.992.5, and the same selection is used for all relevant enabled bits in vdsl2LConfProfXtuTransSysEna. The value is defined as below: 0-Invalid value 1-ADLU-32/EU-32 2-ADLU-36/EU-36 3-ADLU-40/EU-40 4-ADLU-44/EU-44 5-ADLU-48/EU-48 6-ADLU-52/EU-52 7-ADLU-56/EU-56 8-ADLU-60/EU-60 9-ADLU-64/EU-64 " REFERENCE "ITU-T G.997.1 (amendment 1), 7.3.1.10" ::= { vdsl2LineConfProfModeSpecEntry 9 } vdsl2LConfProfPSDClassMask OBJECT-TYPE SYNTAX Vdsl2PSDClassMask MAX-ACCESS read-create STATUS current DESCRIPTION "In order to reduce the number of configuration possibilities, the limit PSD masks are grouped in the following PSD mask classes: - Class 998 Annex A: D-32, D-64. - Class 997-M1c Annex B: 997-M1c-A-7. - Class 997-M1x Annex B: 997-M1x-M-8, 997-M1x-M. - Class 997-M2x Annex B: 997-M2x-M-8, 997-M2x-A, 997-M2x-M. - Class 998-M1x Annex B: 998-M1x-A, 998-M1x-B, 998-M1x-NUS0. - Class 998-M2x Annex B: 998-M2x-A, 998-M2x-M, 998-M2x-B, 998-M2x-NUS0. - Class HPE17 Annex B: HPE17-M1-NUS0. - Class HPE30 Annex B: HPE30-M1-NUS0. - Class 997E17-M2x Annex B: 997E17-M2x-NUS0. - Class 997E30-M2x Annex B: 997E30-M2x-NUS0. - Class 998E17-M2x Annex B: 998E17-M2x-NUS0, 998E17-M2x-NUS0-M, 998E17-M2x-A. - Class 998ADE17-M2x Annex B: 998ADE17-M2x-NUS0-M, 998ADE17-M2x-A, 998ADE17-M2x-B. - Class 998E30-M2x Annex B: 998E30-M2x-NUS0, 998E30-M2x-NUS0-M. - Class 998ADE30-M2x Annex B: 998ADE30-M2x-NUS0-M, 998ADE30-M2x-NUS0-A. " REFERENCE "ITU-T G.997.1(200604), paragraph 7.3.1.1.12" DEFVAL { 14 } ::= { vdsl2LineConfProfModeSpecEntry 10 } vdsl2LConfProfProfiles OBJECT-TYPE SYNTAX Vdsl2Profiles MAX-ACCESS read-create STATUS current DESCRIPTION "This configuration parameter contains the G.993.2 profiles to be allowed by the near-end xTU on this line. " REFERENCE "ITU-T G.997.1(200604), paragraph 7.3.1.1.11" DEFVAL { 5 } ::= { vdsl2LineConfProfModeSpecEntry 11 } vdsl2LConfProfBandOptUsage OBJECT-TYPE SYNTAX Vdsl2BandOptUsage MAX-ACCESS read-create STATUS current DESCRIPTION "Defines the VDSL link use of the optional frequency range [25kHz - 138kHz] (Opt). Options: 1. unused(1) - indicates Opt is unused 2. used(2) - indicates Opt usage is for upstream 3. invalidValue(-1) -Invalid value Huawei defined. " DEFVAL { unused } ::= { vdsl2LineConfProfModeSpecEntry 12 } vdsl2LConfProfModeSpecRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. When 'active' is set, the system will validate the profile. Before a profile can be deleted or taken out of service (by setting this object to 'destroy' or 'outOfService'), it must be not referenced from all associated templates. " ::= { vdsl2LineConfProfModeSpecEntry 13 } hwVdsl2ConfProfVirtualNoiseModeDs OBJECT-TYPE SYNTAX Vdsl2VirtualNoise MAX-ACCESS read-create STATUS current DESCRIPTION "This parameter enables the transmitter referred virtual noise in the downstream direction. If set to 1, the virtual noise is disabled. If set to 2, the virtual noise is enabled. " REFERENCE "ITU-T G.997.1(200604), paragraph 7.3.1.7.1" DEFVAL { disable } ::= { vdsl2LineConfProfModeSpecEntry 65535 } hwVdsl2ConfProfVirtualNoiseModeUs OBJECT-TYPE SYNTAX Vdsl2VirtualNoise MAX-ACCESS read-create STATUS current DESCRIPTION "This parameter enables the transmitter referred virtual noise in the upstream direction. If set to 1, the virtual noise is disabled. If set to 2, the virtual noise is enabled. " REFERENCE "ITU-T G.997.1(200604),paragraph 7.3.1.7.2" DEFVAL { disable } ::= { vdsl2LineConfProfModeSpecEntry 65536 } hwVdsl2ConfProfVirtualNoiseDs OBJECT-TYPE SYNTAX Vdsl2VirtualNoiseDs MAX-ACCESS read-create STATUS current DESCRIPTION "This configuration parameter defines the downstream transmitter referred virtual noise (TXREFVNds). The TXREFVNds shall be specified through a set of breakpoints. Each breakpoint shall consist of a subcarrier index, with a subcarrier spacing of 4.3125 kHz, and a noise PSD level (expressed in dBm/Hz) at that subcarrier. The set of breakpoints can then be represented as [(t1, PSD1), (t2, PSD2),..., (tN, PSDN)]. The subcarrier index shall be coded as an unsigned integer. The noise level shall be coded as an 8-bit unsigned integer representing the noise level -40 dBm/Hz (coded as 0) to -140 dBm/Hz (coded as 200), in steps of 0.5 dBm/Hz. Values from 201 to 255 are special values indicating a noise level of 0 W/Hz. The maximum number of breakpoints is 32. " REFERENCE "ITU-T G.997.1(200604), paragraph 7.3.1.7.3" ::= { vdsl2LineConfProfModeSpecEntry 65537 } hwVdsl2ConfProfVirtualNoiseUs OBJECT-TYPE SYNTAX Vdsl2VirtualNoiseUs MAX-ACCESS read-create STATUS current DESCRIPTION "This configuration parameter defines the upstream transmitter referred virtual noise (TXREFVNus). The TXREFVNus shall be specified through a set of breakpoints. Each breakpoint shall consist of a subcarrier index t, with a subcarrier spacing of 4.3125 kHz, and a noise PSD level (expressed in dBm/Hz) at that subcarrier. The set of breakpoints can then be represented as [(t1, PSD1), (t2, PSD2), ... , (tN, PSDN)]. The subcarrier index shall be coded as an unsigned integer. The noise level shall be coded as an 8-bit unsigned integer representing the noise level -40 dBm/Hz (coded as 0) to -140 dBm/Hz (coded as 200), in steps of 0.5 dBm/Hz. Values from 201 to 255 are special values indicating a noise level of 0 W/Hz. The maximum number of breakpoints is 16. " REFERENCE "ITU-T G.997.1(200604), paragraph 7.3.1.7.4" ::= { vdsl2LineConfProfModeSpecEntry 65538 } hwVdsl2ConfProfAutoProfile OBJECT-TYPE SYNTAX Vdsl2AutoProfile MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable the G.993.2 profiles adaptive function. If set to 1, the G.993.2 profiles adaptive function is disabled. If set to 2, the G.993.2 profiles adaptive function is enabled. " REFERENCE "ITU-T G.997.1(200604), paragraph 7.3.1.1.11" DEFVAL { disable } ::= { vdsl2LineConfProfModeSpecEntry 65539 } -- vdsl2ServProfTable vdsl2ServProfTable OBJECT-TYPE SYNTAX SEQUENCE OF Vdsl2ServProfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table vdsl2ServProfTable contains xDSL line service configuration. The index of this table is vdsl2ServProfName. A default profile with an index of 'DEFVAL' will always exist and its parameters will be set to vendor-specific values, unless otherwise specified in this document. " ::= { vdsl2ProfileTIMode 1 } vdsl2ServProfEntry OBJECT-TYPE SYNTAX Vdsl2ServProfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table vdsl2ServProfTable contains xDSL line service configuration. The index of this entry is vdsl2ServProfName. A default profile with an index of 'DEFVAL' will always exist and its parameters will be set to vendor-specific values, unless otherwise specified in this document. " INDEX { IMPLIED vdsl2ServProfName } ::= { vdsl2ServProfTable 1 } Vdsl2ServProfEntry ::= SEQUENCE { vdsl2ServProfName OCTET STRING, vdsl2ServProfDataPathMode Vdsl2DataPathModeType, vdsl2ServProfBitSwapEnablingDs Vdsl2ProfSwitchType, vdsl2ServProfBitSwapEnablingUs Vdsl2ProfSwitchType, vdsl2ServProfRaMode Vdsl2RaMode, vdsl2ServProfCh1Enabling Vdsl2ChEnabling, vdsl2ServProfCh1MinDataRateDs Unsigned32, vdsl2ServProfCh1MinDataRateUs Unsigned32, vdsl2ServProfCh1MinResDataRateDs Unsigned32, vdsl2ServProfCh1MinResDataRateUs Unsigned32, vdsl2ServProfCh1MaxDataRateDs Unsigned32, vdsl2ServProfCh1MaxDataRateUs Unsigned32, vdsl2ServProfCh1MinDataRateLowPwrDs Unsigned32, vdsl2ServProfCh1MinDataRateLowPwrUs Unsigned32, vdsl2ServProfCh1RaRatioDs Unsigned32, vdsl2ServProfCh1RaRatioUs Unsigned32, vdsl2ServProfCh2Enabling Vdsl2ChEnabling, vdsl2ServProfCh2MinDataRateDs Unsigned32, vdsl2ServProfCh2MinDataRateUs Unsigned32, vdsl2ServProfCh2MinResDataRateDs Unsigned32, vdsl2ServProfCh2MinResDataRateUs Unsigned32, vdsl2ServProfCh2MaxDataRateDs Unsigned32, vdsl2ServProfCh2MaxDataRateUs Unsigned32, vdsl2ServProfCh2MinDataRateLowPwrDs Unsigned32, vdsl2ServProfCh2MinDataRateLowPwrUs Unsigned32, vdsl2ServProfCh2RaRatioDs Unsigned32, vdsl2ServProfCh2RaRatioUs Unsigned32, vdsl2ServProfRowStatus RowStatus, hwvdsl2ServProfMinEtrRtxDs Unsigned32, hwvdsl2ServProfMinEtrRtxUs Unsigned32, hwvdsl2ServProfMaxEtrRtxDs Unsigned32, hwvdsl2ServProfMaxEtrRtxUs Unsigned32, hwvdsl2ServProfMaxNdrRtxDs Unsigned32, hwvdsl2ServProfMaxNdrRtxUs Unsigned32 } vdsl2ServProfName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object identifies a row in this table." ::= { vdsl2ServProfEntry 1 } vdsl2ServProfDataPathMode OBJECT-TYPE SYNTAX Vdsl2DataPathModeType MAX-ACCESS read-create STATUS current DESCRIPTION "This parameter indicates the VDSL2 line data path modes. Options: 1. atm (1) - atm mode 2. ptm (2) - ptm mode " DEFVAL { ptm } ::= { vdsl2ServProfEntry 2 } vdsl2ServProfBitSwapEnablingDs OBJECT-TYPE SYNTAX Vdsl2ProfSwitchType MAX-ACCESS read-create STATUS current DESCRIPTION "Enables or disables the bit swap downstream of a line. Options: 1. enable(1) - Enable the bit swap downstream of a line 2. disable(2) - Disable the bit swap downstream of a line huawei defined. " DEFVAL { enable } ::= { vdsl2ServProfEntry 3 } vdsl2ServProfBitSwapEnablingUs OBJECT-TYPE SYNTAX Vdsl2ProfSwitchType MAX-ACCESS read-create STATUS current DESCRIPTION "Enables or disables the bit swap upstream of a line. Options: 1. enable(1) - Enable the bit swap upstream of a line. 2. disable(2) - Disable the bit swap upstream of a line. huawei defined. " DEFVAL { enable } ::= { vdsl2ServProfEntry 4 } vdsl2ServProfRaMode OBJECT-TYPE SYNTAX Vdsl2RaMode MAX-ACCESS read-create STATUS current DESCRIPTION "The mode of operation of a rate-adaptive xTU-R in the transmit direction. Options: 1. manual (1) - No Rate-Adaptation. The initialization process attempts to synchronize to a specified rate. 2. rainit (2) - Rate-Adaptation during initialization process only, which attempts to synchronize to a rate between minimum and maximum specified values. 3. dynamic (3) - Rate-Adaptation during show time " REFERENCE "ITU-T G.997.1, paragraph 7.3.1.4.2" DEFVAL { raInit } ::= { vdsl2ServProfEntry 5 } vdsl2ServProfCh1Enabling OBJECT-TYPE SYNTAX Vdsl2ChEnabling MAX-ACCESS read-create STATUS current DESCRIPTION "This parameter indicates whether the bearer 1 of VDSL2 line is enabling. Options: 1. enable(1) - Enable the bearer 1 of VDSL2 line. 2. disable(2) - Disable the bearer 1 of VDSL2 line. huawei defined. " DEFVAL { enable } ::= { vdsl2ServProfEntry 6 } vdsl2ServProfCh1MinDataRateDs OBJECT-TYPE SYNTAX Unsigned32(32000..200000000) UNITS "bits/second" MAX-ACCESS read-create STATUS current DESCRIPTION "If retransmission is not used in downstream direction,this parameter specifics minimum data rate for the bearer channel on downstream direction. coded in bit/s. Unit: bits/second " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.1" ::= { vdsl2ServProfEntry 7 } vdsl2ServProfCh1MinDataRateUs OBJECT-TYPE SYNTAX Unsigned32(32000..200000000) UNITS "bits/second" MAX-ACCESS read-create STATUS current DESCRIPTION "If retransmission is not used in upstream direction,this parameter specifics minimum data rate for the bearer channel on upstream direction. coded in bit/s. Unit: bits/second " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.1" ::= { vdsl2ServProfEntry 8 } vdsl2ServProfCh1MinResDataRateDs OBJECT-TYPE SYNTAX Unsigned32(32000..200000000) UNITS "bits/second" MAX-ACCESS read-create STATUS current DESCRIPTION "Minimum Reserved Data Rate on Downstream direction. The minimum reserved net data rate for the bearer channel, coded in bit/s. This parameter is used only if the Rate Adaptation Mode of the bearer channel (i.e., vdsl2ServProfRaMode) is set to Dynamic. Unit: bits/second " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.1" ::= { vdsl2ServProfEntry 9 } vdsl2ServProfCh1MinResDataRateUs OBJECT-TYPE SYNTAX Unsigned32(32000..200000000) UNITS "bits/second" MAX-ACCESS read-create STATUS current DESCRIPTION "Minimum Reserved Data Rate on Upstream direction. The minimum reserved net data rate for the bearer channel, coded in bit/s. This parameter is used only if the Rate Adaptation Mode of the bearer channel (i.e., vdsl2ServProfRaMode) is set to Dynamic. Unit: bits/second " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.1" ::= { vdsl2ServProfEntry 10 } vdsl2ServProfCh1MaxDataRateDs OBJECT-TYPE SYNTAX Unsigned32(32000..200000000) UNITS "bits/second" MAX-ACCESS read-create STATUS current DESCRIPTION "If retransmission is not used in downstream direction,this parameter specifics maximum data rate for the bearer channel on downstream direction. coded in bit/s. Unit: bits/second " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.1" ::= { vdsl2ServProfEntry 11 } vdsl2ServProfCh1MaxDataRateUs OBJECT-TYPE SYNTAX Unsigned32(32000..200000000) UNITS "bits/second" MAX-ACCESS read-create STATUS current DESCRIPTION "If retransmission is not used in upstream direction,this parameter specifics maximum data rate for the bearer channel on upstream direction. coded in bit/s. Unit: bits/second " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.1" ::= { vdsl2ServProfEntry 12 } vdsl2ServProfCh1MinDataRateLowPwrDs OBJECT-TYPE SYNTAX Unsigned32(32000..200000000) UNITS "bits/second" MAX-ACCESS read-create STATUS current DESCRIPTION "Minimum Data Rate in Low Power state on Downstream direction. The minimum net data rate for the bearer channel, coded in bit/s., during the low power state (L1 in G.992.2, L2 in G.992.3). Unit: bits/second " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.1" ::= { vdsl2ServProfEntry 13 } vdsl2ServProfCh1MinDataRateLowPwrUs OBJECT-TYPE SYNTAX Unsigned32(32000..200000000) UNITS "bits/second" MAX-ACCESS read-create STATUS current DESCRIPTION "Minimum Data Rate in Low Power state on Upstream direction. The minimum net data rate for the bearer channel, coded in bit/s, during the low power state (L1 in G.992.2, L2 in G.992.3). Unit: bits/second " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.1" ::= { vdsl2ServProfEntry 14 } vdsl2ServProfCh1RaRatioDs OBJECT-TYPE SYNTAX Unsigned32(0..100) UNITS "percents" MAX-ACCESS read-create STATUS current DESCRIPTION "Rate Adaptation Ratio. The ratio (in %) that should be taken into account for the bearer channel #1 when performing rate adaptation on Downstream. The ratio refers to the available data rate in excess of the Minimum Data Rate, summed over all bearer channels. Also, the 100 - vdsl2ServProfCh1RaRatioDs is the ratio of excess data rate to be assigned to all other bearer channels on Downstream direction. The sum of rate adaptation ratios over all bearers on the same direction shall be equal to 100%. Unit: percents " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.1" DEFVAL { 100 } ::= { vdsl2ServProfEntry 15 } vdsl2ServProfCh1RaRatioUs OBJECT-TYPE SYNTAX Unsigned32(0..100) UNITS "percents" MAX-ACCESS read-create STATUS current DESCRIPTION "Rate Adaptation Ratio. The ratio (in %) that should be taken into account for the bearer channel #1 when performing rate adaptation on Upstream. The ratio refers to the available data rate in excess of the Minimum Data Rate, summed over all bearer channels. Also, the 100 - vdsl2ServProfCh1RaRatioUs is the ratio of excess data rate to be assigned to all other bearer channels on Upstream direction. The sum of rate adaptation ratios over all bearers on the same direction shall be equal to 100%. Unit: percents " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.1" DEFVAL { 100 } ::= { vdsl2ServProfEntry 16 } vdsl2ServProfCh2Enabling OBJECT-TYPE SYNTAX Vdsl2ChEnabling MAX-ACCESS read-create STATUS current DESCRIPTION "This parameter indicates whether the bearer 2 of VDSL2 line is enabling. Options: 1. enable(1) - Enable the bearer 2 of VDSL2 line. 2. disable(2) - Disable the bearer 2 of VDSL2 line. huawei defined. " DEFVAL { disable } ::= { vdsl2ServProfEntry 17 } vdsl2ServProfCh2MinDataRateDs OBJECT-TYPE SYNTAX Unsigned32(32000..200000000) UNITS "bits/second" MAX-ACCESS read-create STATUS current DESCRIPTION "Minimum Data Rate on Downstream direction. The minimum net data rate for the bearer channel, coded in bit/s. Unit: bits/second " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.1" ::= { vdsl2ServProfEntry 18 } vdsl2ServProfCh2MinDataRateUs OBJECT-TYPE SYNTAX Unsigned32(32000..200000000) UNITS "bits/second" MAX-ACCESS read-create STATUS current DESCRIPTION "Minimum Data Rate on Upstream direction. The minimum net data rate for the bearer channel, coded in bit/s. Unit: bits/second " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.1" ::= { vdsl2ServProfEntry 19 } vdsl2ServProfCh2MinResDataRateDs OBJECT-TYPE SYNTAX Unsigned32(32000..200000000) UNITS "bits/second" MAX-ACCESS read-create STATUS current DESCRIPTION "Minimum Reserved Data Rate on Downstream direction. The minimum reserved net data rate for the bearer channel, coded in bit/s. This parameter is used only if the Rate Adaptation Mode of the bearer channel (i.e., vdsl2ServProfRaMode) is set to Dynamic. Unit: bits/second " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.1" ::= { vdsl2ServProfEntry 20 } vdsl2ServProfCh2MinResDataRateUs OBJECT-TYPE SYNTAX Unsigned32(32000..200000000) UNITS "bits/second" MAX-ACCESS read-create STATUS current DESCRIPTION "Minimum Reserved Data Rate on Upstream direction. The minimum reserved net data rate for the bearer channel, coded in bit/s. This parameter is used only if the Rate Adaptation Mode of the bearer channel (i.e., vdsl2ServProfRaMode) is set to Dynamic. Unit: bits/second " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.1" ::= { vdsl2ServProfEntry 21 } vdsl2ServProfCh2MaxDataRateDs OBJECT-TYPE SYNTAX Unsigned32(32000..200000000) UNITS "bits/second" MAX-ACCESS read-create STATUS current DESCRIPTION "Maximum Data Rate on Downstream direction. The maximum net data rate for the bearer channel, coded in bit/s. Unit: bits/second " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.1" ::= { vdsl2ServProfEntry 22 } vdsl2ServProfCh2MaxDataRateUs OBJECT-TYPE SYNTAX Unsigned32(32000..200000000) UNITS "bits/second" MAX-ACCESS read-create STATUS current DESCRIPTION "Maximum Data Rate on Upstream direction. The maximum net data rate for the bearer channel, coded in bit/s. Unit: bits/second " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.1" ::= { vdsl2ServProfEntry 23 } vdsl2ServProfCh2MinDataRateLowPwrDs OBJECT-TYPE SYNTAX Unsigned32(32000..200000000) UNITS "bits/second" MAX-ACCESS read-create STATUS current DESCRIPTION "Minimum Data Rate in Low Power state on Downstream direction. The minimum net data rate for the bearer channel, coded in bit/s, during the low power state (L1 in G.992.2, L2 in G.992.3). Unit: bits/second " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.1" ::= { vdsl2ServProfEntry 24 } vdsl2ServProfCh2MinDataRateLowPwrUs OBJECT-TYPE SYNTAX Unsigned32(32000..200000000) UNITS "bits/second" MAX-ACCESS read-create STATUS current DESCRIPTION "Minimum Data Rate in Low Power state on Upstream direction. The minimum net data rate for the bearer channel, coded in bit/s, during the low power state (L1 in G.992.2, L2 in G.992.3). Unit: bits/second " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.1" ::= { vdsl2ServProfEntry 25 } vdsl2ServProfCh2RaRatioDs OBJECT-TYPE SYNTAX Unsigned32(0..100) UNITS "percents" MAX-ACCESS read-create STATUS current DESCRIPTION "Rate Adaptation Ratio. The ratio (in %) that should be taken into account for the bearer channel #2 when performing rate adaptation on Downstream. The ratio refers to the available data rate in excess of the Minimum Data Rate, summed over all bearer channels. Also, the 100 - vdsl2ServProfCh2RaRatioDs is the ratio of excess data rate to be assigned to all other bearer channels on Downstream direction. The sum of rate adaptation ratios over all bearers on the same direction shall be equal to 100%. Unit: percents " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.1" DEFVAL { 0 } ::= { vdsl2ServProfEntry 26 } vdsl2ServProfCh2RaRatioUs OBJECT-TYPE SYNTAX Unsigned32(0..100) UNITS "percents" MAX-ACCESS read-create STATUS current DESCRIPTION "Rate Adaptation Ratio. The ratio (in %) that should be taken into account for the bearer channel #2 when performing rate adaptation on Upstream. The ratio refers to the available data rate in excess of the Minimum Data Rate, summed over all bearer channels. Also, the 100 - vdsl2ServProfCh2RaRatioUs is the ratio of excess data rate to be assigned to all other bearer channels on Upstream direction. The sum of rate adaptation ratios over all bearers on the same direction shall be equal to 100%. Unit: percents " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.1" DEFVAL { 0 } ::= { vdsl2ServProfEntry 27 } vdsl2ServProfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. When 'active' is set, the system will validate the profile. Before a profile can be deleted or taken out of service (by setting this object to 'destroy' or 'outOfService'), it must be not referenced from all associated lines. " ::= { vdsl2ServProfEntry 28 } hwvdsl2ServProfMinEtrRtxDs OBJECT-TYPE SYNTAX Unsigned32(32000..200000000) UNITS "bits/second" MAX-ACCESS read-create STATUS current DESCRIPTION "If retransmission is used in downstream direction, this parameter specifies the minimum expected throughput for the bearer channel.The values range in steps of 1000 bit/s. " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.1.8" ::= { vdsl2ServProfEntry 29 } hwvdsl2ServProfMinEtrRtxUs OBJECT-TYPE SYNTAX Unsigned32(32000..200000000) UNITS "bits/second" MAX-ACCESS read-create STATUS current DESCRIPTION "If retransmission is used in upstream direction, this parameter specifies the minimum expected throughput for the bearer channel.The values range in steps of 1000 bit/s. " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.1.8" ::= { vdsl2ServProfEntry 30 } hwvdsl2ServProfMaxEtrRtxDs OBJECT-TYPE SYNTAX Unsigned32(32000..200000000) UNITS "bits/second" MAX-ACCESS read-create STATUS current DESCRIPTION "If retransmission is used in downstream direction, this parameter specifies the maximum expected throughput for the bearer channel.The values range in steps of 1000 bit/s. " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.1.9" ::= { vdsl2ServProfEntry 31 } hwvdsl2ServProfMaxEtrRtxUs OBJECT-TYPE SYNTAX Unsigned32(32000..200000000) UNITS "bits/second" MAX-ACCESS read-create STATUS current DESCRIPTION "If retransmission is used in upstream direction, this parameter specifies the maximum expected throughput for the bearer channel.The values range in steps of 1000 bit/s. " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.1.9" ::= { vdsl2ServProfEntry 32 } hwvdsl2ServProfMaxNdrRtxDs OBJECT-TYPE SYNTAX Unsigned32(32000..200000000) UNITS "bits/second" MAX-ACCESS read-create STATUS current DESCRIPTION "If retransmission is used in downstream direction, this parameter specifies the maximum net data rate for the bearer channel. The values range in steps of 1000 bit/s. " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.1.10" ::= { vdsl2ServProfEntry 33 } hwvdsl2ServProfMaxNdrRtxUs OBJECT-TYPE SYNTAX Unsigned32(32000..200000000) UNITS "bits/second" MAX-ACCESS read-create STATUS current DESCRIPTION "If retransmission is used in upstream direction, this parameter specifies the maximum net data rate for the bearer channel.The values range in steps of 1000 bit/s. " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.1.10" ::= { vdsl2ServProfEntry 34 } -- vdsl2SpectrumProfTable vdsl2SpectrumProfTable OBJECT-TYPE SYNTAX SEQUENCE OF Vdsl2SpectrumProfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table vdsl2SpectrumProfTable contains VDSL2 line spectrum configuration. The index of this table is vdsl2SpectrumProfName. A default profile with an index of 'DEFVAL' will always exist and its parameters will be set to vendor-specific values, unless otherwise specified in this document. " ::= { vdsl2ProfileTIMode 2 } vdsl2SpectrumProfEntry OBJECT-TYPE SYNTAX Vdsl2SpectrumProfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table vdsl2SpectrumProfTable contains VDSL2 line spectrum configuration. The index of this entry is vdsl2SpectrumProfName. A default profile with an index of 'DEFVAL' will always exist and its parameters will be set to vendor-specific values, unless otherwise specified in this document. " INDEX { IMPLIED vdsl2SpectrumProfName } ::= { vdsl2SpectrumProfTable 1 } Vdsl2SpectrumProfEntry ::= SEQUENCE { vdsl2SpectrumProfName OCTET STRING, vdsl2SpectrumProfXtuTransSysEna Vdsl2TransmissionModeType, vdsl2SpectrumProfScMaskDs Vdsl2ScMaskDs, vdsl2SpectrumProfScMaskUs Vdsl2ScMaskUs, vdsl2SpectrumProfVDSLtoneblackout OCTET STRING, vdsl2SpectrumProfRfiBands OCTET STRING, vdsl2SpectrumProfRowStatus RowStatus, hwvdsl2SpectrumProfRtxModeDs INTEGER, hwvdsl2SpectrumProfRtxModeUs INTEGER, hwvdsl2SpectrumProfProfLeftrThreshDs Unsigned32, hwvdsl2SpectrumProfProfLeftrThreshUs Unsigned32 } vdsl2SpectrumProfName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object identifies a row in this table." REFERENCE "DSL Forum TR-90, paragraph 5.1.4" ::= { vdsl2SpectrumProfEntry 1 } vdsl2SpectrumProfXtuTransSysEna OBJECT-TYPE SYNTAX Vdsl2TransmissionModeType MAX-ACCESS read-create STATUS current DESCRIPTION "xTU Transmission System Enabling (xTSE). A list of the different coding types enabled in this profile. It is coded in a bit-map representation with 1 or more bits set. A bit set to '1' means that the XTUs may apply the respective coding for the VDSL line. A bit set to '0' means that the XTUs cannot apply the respective coding for the VDSL line. All 'reserved' bits should be set to '0'. " REFERENCE "ITU-T G.997.1, paragraph 7.3.1.1.1" ::= { vdsl2SpectrumProfEntry 2 } vdsl2SpectrumProfScMaskDs OBJECT-TYPE SYNTAX Vdsl2ScMaskDs MAX-ACCESS read-create STATUS current DESCRIPTION "Sub-carriers mask. A bitmap of 512 bits that allows masking up to 512 downstream sub-carriers, depending on NSCds. If bit i (0 <= i < NSCds) is set to '1', the respective downstream sub-carrier i is masked, and if set to '0', the respective sub-carrier is unmasked. Note that there should always be unmasked sub-carriers (i.e., the object cannot be all 1's). Also note that if NSCds < 512, all bits i (NSCds i <= 512) should be set to '1'. " REFERENCE "ITU-T G.997.1, paragraph 7.3.1.2.6" ::= { vdsl2SpectrumProfEntry 3 } vdsl2SpectrumProfScMaskUs OBJECT-TYPE SYNTAX Vdsl2ScMaskUs MAX-ACCESS read-create STATUS current DESCRIPTION "Sub-carriers mask. A bitmap of 64 bits that allows masking up to 64 downstream sub-carriers, depending on NSCds. If bit i (0 <= i < NSCus) is set to '1', the respective upstream sub-carrier i is masked, and if set to '0', the respective sub-carrier is unmasked. Note that there should always be unmasked sub-carriers (i.e., the object cannot be all 1's). Also note that if NSCus < 64, all bits i (NSCus < i <= 64) should be set to '1'. " REFERENCE "ITU-T G.997.1, paragraph 7.3.1.2.7" ::= { vdsl2SpectrumProfEntry 4 } vdsl2SpectrumProfVDSLtoneblackout OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..79)) MAX-ACCESS read-create STATUS current DESCRIPTION "The subset of subcarriermask that shall be used to mask the subcarriers. It is a string of bands consist of begin tone index and end tone index. for example :0-10,20-50,100-4095 It can contain as most as 8 bands. " REFERENCE "ITU-T G.997.1(200604), paragraph 7.3.1.2.8" ::= { vdsl2SpectrumProfEntry 5 } vdsl2SpectrumProfRfiBands OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..159)) MAX-ACCESS read-create STATUS current DESCRIPTION "The subset of PSD mask breakpoints that shall be used to notch an RFI band. It is a string of bands consist of begin tone index and end tone index. for example :0-10,20-50,100-4095 It can contain as most as 16 bands. " REFERENCE "ITU-T G.997.1(200604), paragraph 7.3.1.2.10" ::= { vdsl2SpectrumProfEntry 6 } vdsl2SpectrumProfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. When 'active' is set, the system will validate the profile. Before a profile can be deleted or taken out of service (by setting this object to 'destroy' or 'outOfService'), it must be not referenced from all associated lines. " ::= { vdsl2SpectrumProfEntry 7 } hwvdsl2SpectrumProfRtxModeDs OBJECT-TYPE SYNTAX INTEGER { forbidden(0), preferred(1), forced(2), testmode(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "The mode of operation of G.998.4 retransmission in downstream direction. Options: 1. forbidden(0) - G.998.4 retransmission not allowed. 2. preferred(1) - G.998.4 retransmission is preferred. 3. forced(2) - Force the use of the G.998.4 retransmission. 4. testmode(3) - Force the use of the G.998.4 retransmission in test mode. " REFERENCE "ITU-T G.997.1, paragraph 7.3.1.11" DEFVAL { forbidden } ::= { vdsl2SpectrumProfEntry 8 } hwvdsl2SpectrumProfRtxModeUs OBJECT-TYPE SYNTAX INTEGER { forbidden(0), preferred(1), forced(2), testmode(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "The mode of operation of G.998.4 retransmission in upstream direction. Options: 1. forbidden(0) - G.998.4 retransmission not allowed. 2. preferred(1) - G.998.4 retransmission is preferred. 3. forced(2) - Force the use of the G.998.4 retransmission. 4. testmode(3) - Force the use of the G.998.4 retransmission in test mode. " REFERENCE "ITU-T G.997.1, paragraph 7.3.1.11" DEFVAL { forbidden } ::= { vdsl2SpectrumProfEntry 9 } hwvdsl2SpectrumProfProfLeftrThreshDs OBJECT-TYPE SYNTAX Unsigned32(0..99) UNITS "0.01" MAX-ACCESS read-create STATUS current DESCRIPTION "If retransmission is used in downstream direction, this parameter specifies the threshold for declaring a near-end leftr defect. The value is coded as a fraction of the NDR with valid range from 0.01 to 0.99 with increments of 0.01. A special value means the ETR shall be used as the default threshold for declaring a leftr defect. " REFERENCE "ITU-T G.997.1, paragraph 7.3.1.12" DEFVAL { 0 } ::= { vdsl2SpectrumProfEntry 10 } hwvdsl2SpectrumProfProfLeftrThreshUs OBJECT-TYPE SYNTAX Unsigned32(0..99) UNITS "0.01" MAX-ACCESS read-create STATUS current DESCRIPTION "If retransmission is used in upstream direction, this parameter specifies the threshold for declaring a near-end leftr defect. The value is coded as a fraction of the NDR with valid range from 0.01 to 0.99 with increments of 0.01. A special value means the ETR shall be used as the default threshold for declaring a leftr defect. " REFERENCE "ITU-T G.997.1, paragraph 7.3.1.12" DEFVAL { 0 } ::= { vdsl2SpectrumProfEntry 11 } -- vdsl2SpectrumProfModeSpecTable vdsl2SpectrumProfModeSpecTable OBJECT-TYPE SYNTAX SEQUENCE OF Vdsl2SpectrumProfModeSpecEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table vdsl2SpectrumProfModeSpecTable extends the VDSL2 line configuration profile by VDSL Mode Specific parameters. A row in this table that has an index of vdsl2LconfProfVdslMode == defMode(1), is called a 'mandatory' row. A row in this table that has an index such that vdsl2LconfProfVdslMode is not equal to defMode(1), is called an 'optional' row. When a row in the vdsl2LineConfProfTable table (the parent row) is created, the SNMP agent will automatically create a 'mandatory' row in this table. When the parent row is deleted, the SNMP agent will automatically delete all associated rows in this table. Any attempt to delete the 'mandatory' row using the vdsl2LConfProfModeSpecRowStatus attribute will be rejected by the SNMP agent. The manager MAY create an 'optional' row in this table using the vdsl2LConfProfModeSpecRowStatus attribute if the parent row exists. The manager MAY delete an 'optional' row in this table using the vdsl2LConfProfModeSpecRowStatus attribute at any time. If the actual transmission mode of a DSL line does not match one of the 'optional' rows in this table, then the line will use the PSD configuration from the 'mandatory' row. The indexes of this table are vdsl2SpectrumProfName and vdsl2SpectrumProfXdslMode. " ::= { vdsl2ProfileTIMode 3 } vdsl2SpectrumProfModeSpecEntry OBJECT-TYPE SYNTAX Vdsl2SpectrumProfModeSpecEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table vdsl2SpectrumProfModeSpecTable extends the VDSL2 line configuration profile by VDSL Mode Specific parameters. A row in this table that has an index of vdsl2LconfProfVdslMode == defMode(1), is called a 'mandatory' row. A row in this table that has an index such that vdsl2LconfProfVdslMode is not equal to defMode(1), is called an 'optional' row. When a row in the vdsl2LineConfProfTable table (the parent row) is created, the SNMP agent will automatically create a 'mandatory' row in this table. When the parent row is deleted, the SNMP agent will automatically delete all associated rows in this table. Any attempt to delete the 'mandatory' row using the vdsl2LConfProfModeSpecRowStatus attribute will be rejected by the SNMP agent. The manager MAY create an 'optional' row in this table using the vdsl2LConfProfModeSpecRowStatus attribute if the parent row exists. The manager MAY delete an 'optional' row in this table using the vdsl2LConfProfModeSpecRowStatus attribute at any time. If the actual transmission mode of a DSL line does not match one of the 'optional' rows in this table, then the line will use the PSD configuration from the 'mandatory' row. The indexes of this entry are vdsl2SpectrumProfName and vdsl2SpectrumProfXdslMode. " INDEX { vdsl2SpectrumProfName, vdsl2SpectrumProfXdslMode } ::= { vdsl2SpectrumProfModeSpecTable 1 } Vdsl2SpectrumProfModeSpecEntry ::= SEQUENCE { vdsl2SpectrumProfXdslMode Vdsl2OperationModes, vdsl2SpectrumProfMaxNomPsdDs Integer32, vdsl2SpectrumProfMaxNomPsdUs Integer32, vdsl2SpectrumProfMaxNomAtpDs Unsigned32, vdsl2SpectrumProfMaxNomAtpUs Unsigned32, vdsl2SpectrumProfMaxAggRxPwrUs Integer32, vdsl2SpectrumProfPsdMaskDs Vdsl2PsdMaskDs, vdsl2SpectrumProfPsdMaskUs Vdsl2PsdMaskUs, vdsl2SpectrumProfUpsPsdMaskSelection Vdsl2UpsPsdMaskSelection, vdsl2SpectrumProfPmMode Vdsl2LConfProfPmMode, vdsl2SpectrumProfL0Time Unsigned32, vdsl2SpectrumProfL2Time Unsigned32, vdsl2SpectrumProfL2Atpr Unsigned32, vdsl2SpectrumProfL2Atprt Unsigned32, vdsl2SpectrumProfModeSpecRowStatus RowStatus } vdsl2SpectrumProfXdslMode OBJECT-TYPE SYNTAX Vdsl2OperationModes MAX-ACCESS not-accessible STATUS current DESCRIPTION "The xDSL Mode is a way of categorizing the various xDSL transmission modes into groups, each group (xDSL Mode) shares the same PSD configuration. There should be multiple entries in this table for a given line profile in case multiple bits are set in vdsl2LConfProfXtuTransSysEna for that profile. " REFERENCE "DSL Forum TR-90, paragraph 5.1.8" ::= { vdsl2SpectrumProfModeSpecEntry 1 } vdsl2SpectrumProfMaxNomPsdDs OBJECT-TYPE SYNTAX Integer32(-600..-300) UNITS "0.1 dBm/Hz" MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum nominal transmit PSD in the downstream direction during initialization and Showtime. It ranges from -600 to -300 units of 0.1 dBm/Hz. (physical values are -60 to -30 dBm/Hz). Unit: 0.1 dBm/Hz " REFERENCE "ITU-T G.997.1, paragraph 7.3.1.2" DEFVAL { -400 } ::= { vdsl2SpectrumProfModeSpecEntry 2 } vdsl2SpectrumProfMaxNomPsdUs OBJECT-TYPE SYNTAX Integer32(-600..-300) UNITS "0.1 dBm/Hz" MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum nominal transmit PSD in the upstream direction during initialization and Showtime. It ranges from -600 to -300 units of 0.1 dBm/Hz. (physical values are -60 to -30 dBm/Hz). Unit: 0.1 dBm/Hz " REFERENCE "ITU-T G.997.1, paragraph 7.3.1.2" DEFVAL { -380 } ::= { vdsl2SpectrumProfModeSpecEntry 3 } vdsl2SpectrumProfMaxNomAtpDs OBJECT-TYPE SYNTAX Unsigned32 (0..510) UNITS "0.1 dBm" MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum nominal aggregate transmit power in the downstream direction during initialization and Showtime. It ranges from 0 to 510 units of 0.1 dBm (0 to 255 physical values are 0 to 25.5 dBm, 256 to 510 physical values are -25.5 to -0.1 dBm). Unit: 0.1 dBm " REFERENCE "ITU-T G.997.1, paragraph 7.3.1.2" DEFVAL { 200 } ::= { vdsl2SpectrumProfModeSpecEntry 4 } vdsl2SpectrumProfMaxNomAtpUs OBJECT-TYPE SYNTAX Unsigned32 (0..510) UNITS "0.1 dBm" MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum nominal aggregate transmit power in the upstream direction during initialization and Showtime. It ranges from 0 to 510 units of 0.1 dBm (0 to 255 physical values are 0 to 25.5 dBm, 256 to 510 physical values are -25.5 to -0.1 dBm). Unit: 0.1 dBm " REFERENCE "ITU-T G.997.1, paragraph 7.3.1.2" DEFVAL { 125 } ::= { vdsl2SpectrumProfModeSpecEntry 5 } vdsl2SpectrumProfMaxAggRxPwrUs OBJECT-TYPE SYNTAX Integer32(-255..255) UNITS "0.1 dBm" MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum upstream aggregate receive power over the relevant set of sub-carriers. The xTU-C should verify that the upstream power cutback is such that this maximum aggregate receive power value is honored. It ranges from -255 to 255 units of 0.1 dBm (physical values are -25.5 to 25.5 dBm). A value of all means that there is no limit. Unit: 0.1 dBm " REFERENCE "ITU-T G.997.1, paragraph 7.3.1.2" DEFVAL { 125 } ::= { vdsl2SpectrumProfModeSpecEntry 6 } vdsl2SpectrumProfPsdMaskDs OBJECT-TYPE SYNTAX Vdsl2PsdMaskDs MAX-ACCESS read-create STATUS current DESCRIPTION "This configuration parameter defines the downstream PSD mask applicable at the U-C2 reference point. This MIB PSD mask may impose PSD restrictions in addition to the Limit PSD mask defined in the relevant Recommendation (e.g., G.992.5, G.993.2). This is a string of 32 pairs of values in the following structure: Octets 0+1 - Index of 1st sub-carrier used in the context of a first breakpoint. Octet 2 - The PSD reduction for the sub-carrier indicated in octets 0 and 1. Octets 3-5 - Same, for a 2nd breakpoint. Octets 6-8 - Same, for a 3rd breakpoint. This architecture continues until octets 94-95, which are associated with a 32nd breakpoint. Each subcarrier index is an unsigned number in the range 0 and (NSCds - 1). Each PSD reduction value is in the range 0 (0dBm/Hz) to 255 (-127.5dBm/Hz) with steps of 0.5dBm/Hz. Valid values are in the range 0 to 190 (0 to -95dBm/Hz). When the number of breakpoints is less than 32, all remaining octets are set to the value 0xff. Note that the content of this object should be correlated with the sub-carriers mask and with the RFI setup. " REFERENCE "ITU-T G.997.1(200604), paragraph 7.3.1.2.9" ::= { vdsl2SpectrumProfModeSpecEntry 7 } vdsl2SpectrumProfPsdMaskUs OBJECT-TYPE SYNTAX Vdsl2PsdMaskUs MAX-ACCESS read-create STATUS current DESCRIPTION "This configuration parameter defines the upstream PSD mask applicable at the U R2 reference point. This MIB PSD mask may impose PSD restrictions in addition to the Limit PSD mask defined in the relevant Recommendations (e.g., ITU-T Recommendations G.992.3, G.993.2). This is a string of 16 pairs of values in the following structure: Octets 0+1 - Index of 1st sub-carrier used in the context of a first breakpoint. Octet 2 - The PSD reduction for the sub-carrier indicated in octets 0 and 1. Octets 3-5 - Same, for a 2nd breakpoint. Octets 45-47 - Same, for a 3rd breakpoint. This architecture continues until octets 45-47, which are associated with a 16th breakpoint. Each subcarrier index is an unsigned number in the range 0 and (NSCus - 1). Each PSD reduction value is in the range 0 (0dBm/Hz) to 255 (-127.5dBm/Hz) with steps of 0.5dBm/Hz. Valid values are in the range 0 to 190 (0 to -95dBm/Hz). When the number of breakpoints is less than 16, all remaining octets are set to the value 0xff. Note that the content of this object should be correlated with the sub-carriers mask and with the RFI setup. " REFERENCE "ITU-T G.997.1(200604), paragraph 7.3.1.2.12" ::= { vdsl2SpectrumProfModeSpecEntry 8 } vdsl2SpectrumProfUpsPsdMaskSelection OBJECT-TYPE SYNTAX Vdsl2UpsPsdMaskSelection MAX-ACCESS read-create STATUS current DESCRIPTION "This configuration parameter defines which upstream PSD mask is enabled. This parameter is used only for Annexes J and M of ITU T Recs G.992.3 and G.992.5. As only one selection parameter is defined in the MIB, the same selection value applies to all relevant modes enabled in the XTSE line configuration parameter. It ranges from 1 to 9 and selects the mask with the following definition This object is defaulted adlu-32/eu-32. " REFERENCE "ITU-T G.997.1 (amendment 1), 7.3.1.1.10" ::= { vdsl2SpectrumProfModeSpecEntry 9 } vdsl2SpectrumProfPmMode OBJECT-TYPE SYNTAX Vdsl2LConfProfPmMode MAX-ACCESS read-create STATUS current DESCRIPTION "Power management state Enabling. Defines the power states the ATU-C or ATU-R may autonomously transition to on this line. Options: 1. allowTransitionsToIdle (0) 2. allowTransitionsToLowPower (1) A bit with a '1' value means that the ATU is allowed to transit into the respective state and a '0' value means that the ATU is not allowed to transit into the respective state. " REFERENCE "ITU-T G.997.1, paragraph 7.3.1.1.4" DEFVAL { { allowTransitionsToIdle, allowTransitionsToLowPower } } ::= { vdsl2SpectrumProfModeSpecEntry 10 } vdsl2SpectrumProfL0Time OBJECT-TYPE SYNTAX Unsigned32 (0..255) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "This minimum time (in seconds) between an Exit from the L2 state and the next Entry into the L2 state. It ranges from 0 to 255 seconds. Unit: seconds " REFERENCE "ITU-T G.997.1, paragraph 7.3.1.1.5" DEFVAL { 255 } ::= { vdsl2SpectrumProfModeSpecEntry 11 } vdsl2SpectrumProfL2Time OBJECT-TYPE SYNTAX Unsigned32 (0..255) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "This minimum time (in seconds) between an Entry into the L2 state and the first Power Trim in the L2 state and between two consecutive Power Trims in the L2 State. It ranges from 0 to 255 seconds. Unit: seconds " REFERENCE "ITU-T G.997.1, paragraph 7.3.1.1.6" DEFVAL { 30 } ::= { vdsl2SpectrumProfModeSpecEntry 12 } vdsl2SpectrumProfL2Atpr OBJECT-TYPE SYNTAX Unsigned32 (0..31) UNITS "dB" MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum aggregate transmit power reduction (in dB) that can be performed at transition of L0 to L2 state or through a single Power Trim in the L2 state. Unit: dB " REFERENCE "ITU-T G.997.1 (amendment 1), 7.3.1.1.7" DEFVAL { 3 } ::= { vdsl2SpectrumProfModeSpecEntry 13 } vdsl2SpectrumProfL2Atprt OBJECT-TYPE SYNTAX Unsigned32 (0..31) UNITS "dB" MAX-ACCESS read-create STATUS current DESCRIPTION "The total maximum aggregate transmit power reduction (in dB) that can be performed in an L2 state. This is the sum of all reductions of L2 Request (i.e., at transition of L0 to L2 state) and Power Trims. Unit: dB " REFERENCE "ITU-T G.997.1 (amendment 1), 7.3.1.1.9" DEFVAL { 9 } ::= { vdsl2SpectrumProfModeSpecEntry 14 } vdsl2SpectrumProfModeSpecRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. When 'active' is set, the system will validate the profile. Before a profile can be deleted or taken out of service (by setting this object to 'destroy' or 'outOfService'), it must be not referenced from all associated lines. " ::= { vdsl2SpectrumProfModeSpecEntry 15 } -- vdsl2SpectrumProfSubProfTable vdsl2SpectrumProfSubProfTable OBJECT-TYPE SYNTAX SEQUENCE OF Vdsl2SpectrumProfSubProfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table vdsl2SpectrumProfSubProfTable extends the VDSL2 line configuration profile by profile parameters. The indexes of this table are vdsl2SpectrumProfName, vdsl2SpectrumProfXdslMode, and vdsl2SpectrumProfSubProfiles. " ::= { vdsl2ProfileTIMode 4 } vdsl2SpectrumProfSubProfEntry OBJECT-TYPE SYNTAX Vdsl2SpectrumProfSubProfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table vdsl2SpectrumProfSubProfTable extends the VDSL2 line configuration profile by profile parameters. The indexes of this entry are vdsl2SpectrumProfName, vdsl2SpectrumProfXdslMode, and vdsl2SpectrumProfSubProfiles. " INDEX { vdsl2SpectrumProfName, vdsl2SpectrumProfXdslMode, vdsl2SpectrumProfSubProfiles} ::= { vdsl2SpectrumProfSubProfTable 1 } Vdsl2SpectrumProfSubProfEntry ::= SEQUENCE { vdsl2SpectrumProfSubProfiles Vdsl2SubProfiles, vdsl2SpectrumProfSubProfilesWeight Vdsl2SubProfilesWeight, vdsl2SpectrumProfPsdClassMask Vdsl2TIPsdClassMask, vdsl2SpectrumProfPsdLimitMask Vdsl2PsdLimitMask, vdsl2SpectrumProfUs0PsdMask Vdsl2Us0PsdMask, vdsl2SpectrumProfUs0Disable Vdsl2Us0Disable, vdsl2SpectrumProfSubProfRowStatus RowStatus } vdsl2SpectrumProfSubProfiles OBJECT-TYPE SYNTAX Vdsl2SubProfiles MAX-ACCESS not-accessible STATUS current DESCRIPTION "This configuration parameter contains the G.993.2 profiles to be allowed by the near-end xTU on this line. This object is defaulted Profile17a. " REFERENCE "ITU-T G.997.1 (amendment 1), 7.3.1.1.11" ::= { vdsl2SpectrumProfSubProfEntry 1 } vdsl2SpectrumProfSubProfilesWeight OBJECT-TYPE SYNTAX Vdsl2SubProfilesWeight MAX-ACCESS read-create STATUS current DESCRIPTION "This configuration parameter contains the G.993.2 profiles' weight to be allowed by the near-end xTU on this line. This object is defaulted priorityWeight1. " REFERENCE "ITU-T G.997.1 (amendment 1), 7.3.1.1.11" ::= { vdsl2SpectrumProfSubProfEntry 2 } vdsl2SpectrumProfPsdClassMask OBJECT-TYPE SYNTAX Vdsl2TIPsdClassMask MAX-ACCESS read-create STATUS current DESCRIPTION "(CLASSMASK). In order to reduce the number of configuration possibilities, the limit Power Spectral Density masks (see LIMITMASK) are grouped in PSD mask classes. Each class is designed such that the PSD levels of each limit PSD mask of a specific class are equal in their respective passband above 276 kHz. This parameter is defined per VDSL2 Annex enabled in the xdsl2LConfProfXtuTransSysEna object. It selects a single PSD mask class per Annex that is activated at the VTU-O. This object is defaulted A998/B997M1c/C998. " REFERENCE "ITU-T G.997.1, paragraph #7.3.1.1.12" ::= { vdsl2SpectrumProfSubProfEntry 3 } vdsl2SpectrumProfPsdLimitMask OBJECT-TYPE SYNTAX Vdsl2PsdLimitMask MAX-ACCESS read-create STATUS current DESCRIPTION "(LIMITMASK). This configuration parameter contains the G.993.2 limit PSD masks of the selected PSD mask class, enabled by the near-end xTU on this line for each class of profiles. This parameter is defined per VDSL2 Annex enabled in the xdsl2LConfProfXtuTransSysEna object. Through this parameter several limit PSD masks of the selected PSD mask class (xdsl2LConfProfClassMask) may be enabled. The enabling parameter is coded in a bitmap representation (0 if the associated mask is not allowed, 1 if it is allowed).This object is defaulted AnnexB998-M2x-B. " REFERENCE "ITU-T G.997.1, paragraph #7.3.1.1.13" ::= { vdsl2SpectrumProfSubProfEntry 4 } vdsl2SpectrumProfUs0PsdMask OBJECT-TYPE SYNTAX Vdsl2Us0PsdMask MAX-ACCESS read-create STATUS current DESCRIPTION "This parameter contains the US0 PSD masks to be allowed by the near-end xTU on the line. This parameter is only defined for G.993.2 Annex A. It is represented as a bitmap (0 if not allowed and 1 if allowed) with the following definitions. This object is defaulted ADLU-32/EU-32. " REFERENCE "ITU-T G.997.1 (amendment 1), 7.3.1.1.15" ::= { vdsl2SpectrumProfSubProfEntry 5 } vdsl2SpectrumProfUs0Disable OBJECT-TYPE SYNTAX Vdsl2Us0Disable MAX-ACCESS read-create STATUS current DESCRIPTION "This configuration parameter indicates if the use of US0 is disabled for each limit PSD mask enabled in the LIMITMASK parameter. This object is defaulted Unused. " REFERENCE "ITU-T G.997.1 (amendment 1), 7.3.1.1.14" ::= { vdsl2SpectrumProfSubProfEntry 6 } vdsl2SpectrumProfSubProfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. When 'active' is set, the system will validate the profile. Before a profile can be deleted or taken out of service (by setting this object to 'destroy' or 'outOfService'), it must be not referenced from all associated lines. " ::= { vdsl2SpectrumProfSubProfEntry 7 } -- vdsl2DpboProfTable vdsl2DpboProfTable OBJECT-TYPE SYNTAX SEQUENCE OF Vdsl2DpboProfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table vdsl2DpboProfTable contains VDSL2 DPBO configuration. The index of this table is vdsl2DpboProfName. A default profile with an index of 'DEFVAL' will always exist and its parameters will be set to vendor-specific values, unless otherwise specified in this document. " ::= { vdsl2ProfileTIMode 5 } vdsl2DpboProfEntry OBJECT-TYPE SYNTAX Vdsl2DpboProfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table vdsl2DpboProfTable contains VDSL2 DPBO configuration. The index of this entry is vdsl2DpboProfName. A default profile with an index of 'DEFVAL' will always exist and its parameters will be set to vendor-specific values, unless otherwise specified in this document. " INDEX { IMPLIED vdsl2DpboProfName } ::= { vdsl2DpboProfTable 1 } Vdsl2DpboProfEntry ::= SEQUENCE { vdsl2DpboProfName OCTET STRING, vdsl2DpboProfWkMdMask Unsigned32, vdsl2DpboProfEpsd Vdsl2DpboEpsd, vdsl2DpboProfEsel Unsigned32, vdsl2DpboProfEscm Vdsl2DpboEscm, vdsl2DpboProfMus Unsigned32, vdsl2DpboProfFmin Unsigned32, vdsl2DpboProfFmax Unsigned32, vdsl2DpboProfRowStatus RowStatus, vdsl2DpboProfEselMin Unsigned32 } vdsl2DpboProfName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object identifies a row in this table." REFERENCE "DSL Forum TR-90, paragraph 5.1.4" ::= { vdsl2DpboProfEntry 1 } vdsl2DpboProfWkMdMask OBJECT-TYPE SYNTAX Unsigned32 (0..511) MAX-ACCESS read-create STATUS current DESCRIPTION "This configuration parameter defines the current enabled DPBO working mode mask. DPBO working mode enabling:1-ADSL, 2-ADSL2+ 3-VDSL2. Options: 1. current enabled dpbo work mode:ADSL 2. current enabled dpbo work mode:ADSL2+ 3. current enabled dpbo work mode:ADSL,ADSL2+ 4. current enabled dpbo work mode:VDSL2 5. current enabled dpbo work mode:ADSL,VDSL2 6. current enabled dpbo work mode:ADSL2+,VDSL2 7. current enabled dpbo work mode:ADSL,ADSL2+,VDSL2 " DEFVAL { 7 } ::= { vdsl2DpboProfEntry 2 } vdsl2DpboProfEpsd OBJECT-TYPE SYNTAX Vdsl2DpboEpsd MAX-ACCESS read-create STATUS current DESCRIPTION "This parameter defines the PSD mask that is assumed to be permitted at the exchange. This parameter shall use the same format as PSDMASKds.The maximum number of breakpoints for DPBOEPSD is 16. This is a string of 16 pairs of values in the following structure: Octets 0+1 - Index of 1st sub-carrier used in the context of a first breakpoint. Octet 2 - The PSD reduction for the sub-carrier indicated in octets 0 and 1. Octets 3-5 - Same, for a 2nd breakpoint. Octets 6-8 - Same, for a 3rd breakpoint. This architecture continues until octets 45-47, which are associated with a 16th breakpoint. Each subcarrier index is an unsigned number in the range 1 and NSCds. Each PSD reduction value is in the range 0 (0dBm/Hz) to 255 (-127.5dBm/Hz) with steps of 0.5dBm/Hz. Valid values are in the range 0 to 190 (0 to -95dBm/Hz). When the number of breakpoints is less than 16, all remaining octets are set to the value 0xff. " REFERENCE "ITU-T G.997.1(200604), paragraph 7.3.1.2.13" ::= { vdsl2DpboProfEntry 3 } vdsl2DpboProfEsel OBJECT-TYPE SYNTAX Unsigned32 (0..511) UNITS "0.5dB" MAX-ACCESS read-create STATUS current DESCRIPTION "This configuration parameter defines the assumed electrical length of cables (E-side cables) connecting exchange based DSL services to a remote flexibility point (cabinet), that hosts the xTU-C that is subject to spectrally shaped downstream power back-off depending on this length. For this parameter the electrical length is defined as the loss (in dB) of an equivalent length of hypothetical cable at a reference frequency defined by the network operator or in spectrum management regulations. DPBOESEL shall be coded as an unsigned integer representing an electrical length from 0 dB (coded as 0) to 255.5 dB (coded as 511) in steps of 0.5 dB. All values in the range are valid.If DPBOESEL is set to zero, the DPBO in this section shall be disabled. Unit: 0.5dB " REFERENCE "ITU-T G.997.1(200604), paragraph 7.3.1.2.13" DEFVAL { 0 } ::= { vdsl2DpboProfEntry 4 } vdsl2DpboProfEscm OBJECT-TYPE SYNTAX Vdsl2DpboEscm MAX-ACCESS read-create STATUS current DESCRIPTION "This configuration parameter defines a cable model in terms of three scalars DPBOESCMA, DPBOESCMB and DPBOESCMC that shall be used to describe the frequency dependent loss of E-side cables.Parameters DPBOESCMA, DPBOESCMB, DPBOESCMC shall be coded as unsigned integers representing a scalar value from -1 (coded as 0) to 1.5 (coded as 640) in step of 1/256. All values in the range are valid. Octets 0+1 DPBOESCMA Octets 2+3 DPBOESCMB Octets 4+5 DPBOESCMC " REFERENCE "ITU-T G.997.1(200604), paragraph 7.3.1.2.13" ::= { vdsl2DpboProfEntry 5 } vdsl2DpboProfMus OBJECT-TYPE SYNTAX Unsigned32 (0..255) UNITS "-0.5dBm/Hz" MAX-ACCESS read-create STATUS current DESCRIPTION "DPBOMUS defines the assumed Minimum Usable receive Signal PSD (in dBm/Hz) for exchange based services, used to modify parameter DPBOFMAX defined below. It shall be coded as an unsigned integer representing a PSD level from 0 dBm/Hz (coded as 0) to -127.5 dBm/Hz (coded as 255) in steps of 0.5 dBm/Hz. All values in the range are valid. Unit: -0.5dBm/Hz " REFERENCE "ITU-T G.997.1(200604), paragraph 7.3.1.2.13" DEFVAL { 180 } ::= { vdsl2DpboProfEntry 6 } vdsl2DpboProfFmin OBJECT-TYPE SYNTAX Unsigned32 (0..2048) UNITS "4.3125 KHz" MAX-ACCESS read-create STATUS current DESCRIPTION "DPBOFMIN defines the minimum frequency from which the DPBO shall be applied. It shall be coded as a 16 bits unsigned integer representing a frequency in multiple of 4.3125 KHz. The range of valid values is from 0 kHz (coded as 0) to 8832 kHz (coded as 2048). Unit: 4.3125 KHz " REFERENCE "ITU-T G.997.1(200604), paragraph 7.3.1.2.13" DEFVAL { 0 } ::= { vdsl2DpboProfEntry 7 } vdsl2DpboProfFmax OBJECT-TYPE SYNTAX Unsigned32 (32..6956) UNITS "4.3125 KHz" MAX-ACCESS read-create STATUS current DESCRIPTION "DPBOFMAX defines the maximum frequency at which DPBO may be applied. It shall be coded as a 16 bits unsigned integer representing a frequency in multiple of 4.3125 KHz. The range of valid values is from 138 kHz (coded as 32) to 29997.75 kHz (coded as 6956). Unit: 4.3125 KHz " REFERENCE "ITU-T G.997.1(200604), paragraph 7.3.1.2.13" DEFVAL { 511 } ::= { vdsl2DpboProfEntry 8 } vdsl2DpboProfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. When 'active' is set, the system will validate the profile. Before a profile can be deleted or taken out of service (by setting this object to 'destroy' or 'outOfService'), it must be not referenced from all associated lines. " ::= { vdsl2DpboProfEntry 9 } vdsl2DpboProfEselMin OBJECT-TYPE SYNTAX Unsigned32 (0..511) UNITS "0.5dB" MAX-ACCESS read-create STATUS current DESCRIPTION "DPBOESELMIN in dB is the minimum of all main cable losses for the KVz supplied when using the SOL model (expansion of a KVz and VDSL2 provision of additional KVz areas from this KVz using cross-cables to additional KVz), including the KVz at the MSAN site. This value must be adjustable as the minimum requirement via the SNMP interface in the configuration profile for each VDSL2 port, and is set individually for each MSAN site and usage. As an option, As an option, adjustment can be done for each MSAN or line card, thus taking effect for entire port groups. It is used only for determining the MUF. Unit: 0.5dB " ::= { vdsl2DpboProfEntry 65535 } -- vdsl2UpboProfTable vdsl2UpboProfTable OBJECT-TYPE SYNTAX SEQUENCE OF Vdsl2UpboProfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table vdsl2UpboProfTable contains VDSL2 upbo configuration. The index of this table is vdsl2UpboProfName. A default profile with an index of 'DEFVAL' will always exist and its parameters will be set to vendor-specific values, unless otherwise specified in this document. " ::= { vdsl2ProfileTIMode 6 } vdsl2UpboProfEntry OBJECT-TYPE SYNTAX Vdsl2UpboProfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table vdsl2UpboProfTable contains VDSL2 upbo configuration . The index of this entry is vdsl2UpboProfName. A default profile with an index of 'DEFVAL' will always exist and its parameters will be set to vendor-specific values, unless otherwise specified in this document. " INDEX { IMPLIED vdsl2UpboProfName } ::= { vdsl2UpboProfTable 1 } Vdsl2UpboProfEntry ::= SEQUENCE { vdsl2UpboProfName OCTET STRING, vdsl2UpboProfPsdBand Vdsl2UpboPsdBand, vdsl2UpboProfKl Unsigned32, vdsl2UpboProfKlf Vdsl2UpboKlf, vdsl2UpboProfKlAuto Unsigned32, vdsl2UpboProfRowStatus RowStatus, vdsl2UpboProfBoostMode Vdsl2UpboBoostMode, vdsl2UpboProfKl0RefBand Vdsl2UpboKl0RefBand } vdsl2UpboProfName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object identifies a row in this table." REFERENCE "DSL Forum TR-90, paragraph 5.1.4" ::= { vdsl2UpboProfEntry 1 } vdsl2UpboProfPsdBand OBJECT-TYPE SYNTAX Vdsl2UpboPsdBand MAX-ACCESS read-create STATUS current DESCRIPTION "This parameter defines the UPBO reference PSD used to compute the upstream power back-off for each upstream band. A UPBOPSD defined for each band shall consist of two parameters [a, b]. Parameter a shall be coded as an unsigned 12-bit number from 40 dBm/Hz (coded as 0) to 80.95 dBm/Hz (coded as 4095) in steps of 0.01 dBm/Hz; and b shall be coded as an unsigned 12 bit number from 0 (coded as 0) to 40.95 dBm/Hz (coded as 4095) in steps of 0.01 dBm/Hz. The UPBO reference PSD at the frequency f expressed in MHz shall be equal to '-a-b(SQRT(f))'. The set of parameter values a = 40 dBm/Hz, b = 0 dBm/Hz is a special configuration to disable UPBO in the respective upstream band. Octets 0+1 - a[0] Octets 2+3 - b[0] Octets 4+5 - a[1] Octets 6+7 - b[1] Octets 8+9 - a[2] Octets 10+11 - b[2] Octets 12+13 - a[3] Octets 14+15 - b[3] Octets 16+17 - a[4] Octets 18+19 - b[4] " REFERENCE "ITU-T G.997.1(200604), paragraph 7.3.1.2.14" ::= { vdsl2UpboProfEntry 2 } vdsl2UpboProfKl OBJECT-TYPE SYNTAX Unsigned32 (0..1280) UNITS "0.1 dB" MAX-ACCESS read-create STATUS current DESCRIPTION "This parameter defines the electrical loop length expressed in dB at 1MHz, kl0, configured by the CO-MIB. The value shall be coded as an unsigned 16 bit number in the range 0 (coded as 0) to 128 dB (coded as 1280) in steps of 0.1 dB. Unit: 0.1 dB " REFERENCE "ITU-T G.997.1(200604), paragraph 7.3.1.2.14" DEFVAL { 0 } ::= { vdsl2UpboProfEntry 3 } vdsl2UpboProfKlf OBJECT-TYPE SYNTAX Vdsl2UpboKlf MAX-ACCESS read-create STATUS current DESCRIPTION "This parameter is a flag that forces the VTU-R to use the electrical loop length of the CO-MIB (UPBOKL) to compute the UPBO. The value shall be forced if the flag is set to 1. Otherwise, the electrical loop length shall be autonomously selected by the VTU-O. " REFERENCE "ITU-T G.997.1(200604), paragraph 7.3.1.2.14" DEFVAL { auto } ::= { vdsl2UpboProfEntry 4 } vdsl2UpboProfKlAuto OBJECT-TYPE SYNTAX Unsigned32(1..4) MAX-ACCESS read-create STATUS current DESCRIPTION "This parameter defines the mode in which kl0 is computed when Vdsl2UpboKlf is auto. The value is defined as below: 1-max(kl0CO,kl0CPE) 2-min(kl0CO,kl0CPE) 3-kl0CO 4-kl0CPE The default value is 3 " DEFVAL { 3 } ::= { vdsl2UpboProfEntry 5 } vdsl2UpboProfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. When 'active' is set, the system will validate the profile. Before a profile can be deleted or taken out of service (by setting this object to 'destroy' or 'outOfService'), it must be not referenced from all associated lines. " ::= { vdsl2UpboProfEntry 6 } vdsl2UpboProfBoostMode OBJECT-TYPE SYNTAX Vdsl2UpboBoostMode MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates whether the equalized FEXT UPBO method is supported or not. Options: 1. disable(1) - The Equalized FEXT UPBO method is not supported 2. enable(2) - The Equalized FEXT UPBO method is supported " DEFVAL { enable } ::= { vdsl2UpboProfEntry 65535 } vdsl2UpboProfKl0RefBand OBJECT-TYPE SYNTAX Vdsl2UpboKl0RefBand MAX-ACCESS read-create STATUS current DESCRIPTION "Octets 0+1 - length[1] Octets 2+3 - length[2] Octets 4+5 - length[3] Octets 6+7 - length[4] " REFERENCE "This parameter defines the UPBO reference electrical length used to compute the upstream power back-off for each upstream band except US0, for the optional Equalized FEXT UPBO method. The value ranges from 1.8 to 63.5 dB in steps of 0.1 dB with special value 0.The special value 0 indicates optional Equalized FEXT UPBO method is not supported. " ::= { vdsl2UpboProfEntry 65536 } -- vdsl2NoiseMarginProfTable vdsl2NoiseMarginProfTable OBJECT-TYPE SYNTAX SEQUENCE OF Vdsl2NoiseMarginProfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table vdsl2NoiseMarginProfTable contains VDSL2 noise margin configuration. The index of this table is vdsl2NoiseMarginProfName. A default profile with an index of 'DEFVAL' will always exist and its parameters will be set to vendor-specific values, unless otherwise specified in this document. " ::= { vdsl2ProfileTIMode 7 } vdsl2NoiseMarginProfEntry OBJECT-TYPE SYNTAX Vdsl2NoiseMarginProfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table vdsl2NoiseMarginProfTable contains VDSL2 noise margin configuration. The index of this entry is vdsl2NoiseMarginProfName. A default profile with an index of 'DEFVAL' will always exist and its parameters will be set to vendor-specific values, unless otherwise specified in this document. " INDEX { IMPLIED vdsl2NoiseMarginProfName } ::= { vdsl2NoiseMarginProfTable 1 } Vdsl2NoiseMarginProfEntry ::= SEQUENCE { vdsl2NoiseMarginProfName OCTET STRING, vdsl2NoiseMarginProfTargetSnrmDs Unsigned32, vdsl2NoiseMarginProfTargetSnrmUs Unsigned32, vdsl2NoiseMarginProfMaxSnrmDs Unsigned32, vdsl2NoiseMarginProfMaxSnrmUs Unsigned32, vdsl2NoiseMarginProfMinSnrmDs Unsigned32, vdsl2NoiseMarginProfMinSnrmUs Unsigned32, vdsl2NoiseMarginProfRaUsNrmDs Unsigned32, vdsl2NoiseMarginProfRaUsNrmUs Unsigned32, vdsl2NoiseMarginProfRaUsTimeDs Unsigned32, vdsl2NoiseMarginProfRaUsTimeUs Unsigned32, vdsl2NoiseMarginProfRaDsNrmsDs Unsigned32, vdsl2NoiseMarginProfRaDsNrmsUs Unsigned32, vdsl2NoiseMarginProfRaDsTimeDs Unsigned32, vdsl2NoiseMarginProfRaDsTimeUs Unsigned32, vdsl2NoiseMarginProfDsThresholdDs Unsigned32, vdsl2NoiseMarginProfUsThresholdDs Unsigned32, vdsl2NoiseMarginProfDsThresholdUs Unsigned32, vdsl2NoiseMarginProfUsThresholdUs Unsigned32, vdsl2NoiseMarginProfRowStatus RowStatus } vdsl2NoiseMarginProfName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object identifies a row in this table." REFERENCE "DSL Forum TR-90, paragraph 5.1.4" ::= { vdsl2NoiseMarginProfEntry 1 } vdsl2NoiseMarginProfTargetSnrmDs OBJECT-TYPE SYNTAX Unsigned32(0..310) UNITS "0.1 dB" MAX-ACCESS read-create STATUS current DESCRIPTION "The minimum Noise Margin the xTU-R receiver shall achieve, relative to the BER requirement for each of the downstream bearer channels, to successfully complete initialization. The target noise margin ranges from 0 to 310 units of 0.1 dB (Physical values are 0 to 31 dB). Unit: 0.1 dB " REFERENCE "ITU-T G.997.1, paragraph 7.3.1.3.1" DEFVAL { 60 } ::= { vdsl2NoiseMarginProfEntry 2 } vdsl2NoiseMarginProfTargetSnrmUs OBJECT-TYPE SYNTAX Unsigned32(0..310) UNITS "0.1 dB" MAX-ACCESS read-create STATUS current DESCRIPTION "The minimum Noise Margin the xTU-C receiver shall achieve, relative to the BER requirement for each of the upstream bearer channels, to successfully complete initialization. The target noise margin ranges from 0 to 310 units of 0.1 dB (Physical values are 0 to 31 dB). Unit: 0.1 dB " REFERENCE "ITU-T G.997.1, paragraph 7.3.1.3.2" DEFVAL { 60 } ::= { vdsl2NoiseMarginProfEntry 3 } vdsl2NoiseMarginProfMaxSnrmDs OBJECT-TYPE SYNTAX Unsigned32 UNITS "0.1 dB" MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum Noise Margin the xTU-R receiver shall try to sustain. If the Noise Margin is above this level, the xTU-R shall request that the xTU-C reduce the xTU-C transmit power to get a noise margin below this limit (if this functionality is supported). The maximum noise margin ranges from 0 to 310 units of 0.1 dB (Physical values are 0 to 31 dB). A value of all 1's means that there is no maximum. Unit: 0.1 dB " REFERENCE "ITU-T G.997.1, paragraph 7.3.1.3.3" DEFVAL { 310 } ::= { vdsl2NoiseMarginProfEntry 4 } vdsl2NoiseMarginProfMaxSnrmUs OBJECT-TYPE SYNTAX Unsigned32 UNITS "0.1 dB" MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum Noise Margin the xTU-C receiver shall try to sustain. If the Noise Margin is above this level, the xTU-C shall request that the xTU-R reduce the xTU-R transmit power to get a noise margin below this limit (if this functionality is supported). The maximum noise margin ranges from 0 to 310 units of 0.1 dB (Physical values are 0 to 31 dB). A value of all 1's means that there is no maximum. Unit: 0.1 dB " REFERENCE "ITU-T G.997.1, paragraph 7.3.1.3.4" DEFVAL { 310 } ::= { vdsl2NoiseMarginProfEntry 5 } vdsl2NoiseMarginProfMinSnrmDs OBJECT-TYPE SYNTAX Unsigned32(0..310) UNITS "0.1 dB" MAX-ACCESS read-create STATUS current DESCRIPTION "The minimum Noise Margin the xTU-R receiver shall tolerate. If the noise margin falls below this level, the xTU-R shall request that the xTU-C increase the xTU-C transmit power. If an increase to xTU-C transmit power is not possible, a loss-of-margin (LOM) defect occurs, the xTU-R shall fail and attempt to reinitialize and the NMS shall be notified. The minimum noise margin ranges from 0 to 310 units of 0.1 dB (Physical values are 0 to 31 dB). A value of 0 means that there is no minimum. Unit: 0.1 dB " REFERENCE "ITU-T G.997.1, paragraph 7.3.1.3.5" DEFVAL { 10 } ::= { vdsl2NoiseMarginProfEntry 6 } vdsl2NoiseMarginProfMinSnrmUs OBJECT-TYPE SYNTAX Unsigned32(0..310) UNITS "0.1 dB" MAX-ACCESS read-create STATUS current DESCRIPTION "The minimum Noise Margin the xTU-C receiver shall tolerate. If the noise margin falls below this level, the xTU-C shall request that the xTU-R increase the xTU-R transmit power. If an increase of xTU-R transmit power is not possible, a loss-of-margin (LOM) defect occurs, the xTU-C shall fail and attempt to re-initialize and the NMS shall be notified. The minimum noise margin ranges from 0 to 310 units of 0.1 dB (Physical values are 0 to 31 dB). A value of 0 means that there is no minimum. Unit: 0.1 dB " REFERENCE "ITU-T G.997.1, paragraph 7.3.1.3.6" DEFVAL { 10 } ::= { vdsl2NoiseMarginProfEntry 7 } vdsl2NoiseMarginProfRaUsNrmDs OBJECT-TYPE SYNTAX Unsigned32(0..310) UNITS "0.1 dB" MAX-ACCESS read-create STATUS current DESCRIPTION "The Downstream Up-Shift Noise Margin value, to be used when Vdsl2LineConfRaModeDs is set to DynamicRa. If the downstream noise margin is above this value and stays above it for more than the time specified by the Vdsl2ServProfRaUsTimeDs, the xTU-R shall attempt to increase the downstream net data rate. The Downstream Up-shift Noise Margin ranges from 0 to 310 units of 0.1 dB (Physical values are 0 to 31 dB). Unit: 0.1 dB " REFERENCE "ITU-T G.997.1, paragraph 7.3.1.4.3" DEFVAL { 310 } ::= { vdsl2NoiseMarginProfEntry 8 } vdsl2NoiseMarginProfRaUsNrmUs OBJECT-TYPE SYNTAX Unsigned32(0..310) UNITS "0.1 dB" MAX-ACCESS read-create STATUS current DESCRIPTION "The Upstream Up-Shift Noise Margin value, to be used when Vdsl2LineConfRaModeUs is set to DynamicRa. If the upstream noise margin is above this value and stays above it for more than the time specified by the Vdsl2LineConfRaUsTimeUs, the xTU-C shall attempt to increase the upstream net data rate. The Upstream Up-shift Noise Margin ranges from 0 to 310 units of 0.1 dB (Physical values are 0 to 31 dB). Unit: 0.1 dB " REFERENCE "ITU-T G.997.1, paragraph 7.3.1.4.4" DEFVAL { 310 } ::= { vdsl2NoiseMarginProfEntry 9 } vdsl2NoiseMarginProfRaUsTimeDs OBJECT-TYPE SYNTAX Unsigned32(0..16383) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The Downstream Up-Shift Time Interval, to be used when Vdsl2LineConfRaModeDs is set to DynamicRa. The interval of time that the downstream noise margin should stay above the Downstream Up-shift Noise Margin before the xTU-R shall attempt to increase the downstream net data rate. Unit: seconds " REFERENCE "ITU-T G.997.1, paragraph 7.3.1.4.5" DEFVAL { 3600 } ::= { vdsl2NoiseMarginProfEntry 10 } vdsl2NoiseMarginProfRaUsTimeUs OBJECT-TYPE SYNTAX Unsigned32(0..16383) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The Upstream Up-Shift Time Interval, to be used when Vdsl2LineConfRaModeUs is set to DynamicRa. The interval of time the upstream noise margin should stay above the Upstream Up-shift Noise Margin before the xTU-C shall attempt to increase the upstream net data rate. Unit: seconds " REFERENCE "ITU-T G.997.1, paragraph 7.3.1.4.6" DEFVAL { 3600 } ::= { vdsl2NoiseMarginProfEntry 11 } vdsl2NoiseMarginProfRaDsNrmsDs OBJECT-TYPE SYNTAX Unsigned32(0..310) UNITS "0.1 dB" MAX-ACCESS read-create STATUS current DESCRIPTION "The Downstream Down-Shift Noise Margin value, to be used when Vdsl2LineConfRaModeDs is set to DynamicRa. If the downstream noise margin is below this value and stays below that for more than the time specified by the Vdsl2LineConfRaDsTimeDs, the xTU-R shall attempt to decrease the downstream net data rate. The Downstream Down-shift Noise Margin ranges from 0 to 310 units of 0.1 dB (Physical values are 0 to 31 dB). Unit: 0.1 dB " REFERENCE "ITU-T G.997.1, paragraph 7.3.1.4.7" DEFVAL { 10 } ::= { vdsl2NoiseMarginProfEntry 12 } vdsl2NoiseMarginProfRaDsNrmsUs OBJECT-TYPE SYNTAX Unsigned32(0..310) UNITS "0.1 dB" MAX-ACCESS read-create STATUS current DESCRIPTION "The Upstream Downshift Noise Margin value, to be used when Vdsl2LineConfRaModeUs is set to DynamicRa. If the upstream noise margin is below this value and stays below that for more than the time specified by the Vdsl2LineConfRaDsTimeUs, the xTU-C shall attempt to decrease the upstream net data rate. The Upstream Down-shift Noise Margin ranges from 0 to 310 units of 0.1 dB (Physical values are 0 to 31 dB). Unit: 0.1 dB " REFERENCE "ITU-T G.997.1, paragraph 7.3.1.4.8" DEFVAL { 10 } ::= { vdsl2NoiseMarginProfEntry 13 } vdsl2NoiseMarginProfRaDsTimeDs OBJECT-TYPE SYNTAX Unsigned32(0..16383) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The Downstream Downshift Time Interval, to be used when Vdsl2LineConfRaModeDs is set to DynamicRa. The interval of time the downstream noise margin should stay below the Downstream Down-shift Noise Margin before the xTU-R shall attempt to decrease the downstream net data rate. Unit: seconds " REFERENCE "ITU-T G.997.1, paragraph 7.3.1.4.9" DEFVAL { 3600 } ::= { vdsl2NoiseMarginProfEntry 14 } vdsl2NoiseMarginProfRaDsTimeUs OBJECT-TYPE SYNTAX Unsigned32(0..16383) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The Upstream Down-Shift Time Interval, to be used when Vdsl2LineConfRaModeUs is set to DynamicRa. The interval of time the upstream noise margin should stay below the Upstream Down-shift Noise Margin before the xTU-C shall attempt to decrease the upstream net data rate. Unit: seconds " REFERENCE "ITU-T G.997.1, paragraph 7.3.1.4.10" DEFVAL { 3600 } ::= { vdsl2NoiseMarginProfEntry 15 } vdsl2NoiseMarginProfDsThresholdDs OBJECT-TYPE SYNTAX Unsigned32(0..200000000) UNITS "bits/second" MAX-ACCESS read-create STATUS current DESCRIPTION "Data Rate Threshold Downshift for downstream direction. A 'Down-shift rate change' event is triggered when the actual downstream data rate is below the data rate at the last entry into Showtime, by more than the threshold. The parameter is coded in bit/s. Unit: bits/second " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.6" DEFVAL { 0 } ::= { vdsl2NoiseMarginProfEntry 16 } vdsl2NoiseMarginProfUsThresholdDs OBJECT-TYPE SYNTAX Unsigned32(0..200000000) UNITS "bits/second" MAX-ACCESS read-create STATUS current DESCRIPTION "Data Rate Threshold Up shift for downstream direction. An 'Up-shift rate change' event is triggered when the actual downstream data rate exceeds, by more than the threshold, the data rate at the last entry into Showtime. The parameter is coded in bit/s. Unit: bits/second " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.6" DEFVAL { 0 } ::= { vdsl2NoiseMarginProfEntry 17 } vdsl2NoiseMarginProfDsThresholdUs OBJECT-TYPE SYNTAX Unsigned32(0..200000000) UNITS "bits/second" MAX-ACCESS read-create STATUS current DESCRIPTION "Data Rate Threshold Downshift for upstream direction. A 'Down-shift rate change' event is triggered when the actual upstream data rate is below the data rate at the last entry into Showtime, by more than the threshold. The parameter is coded in bit/s. Unit: bits/second " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.6" DEFVAL { 0 } ::= { vdsl2NoiseMarginProfEntry 18 } vdsl2NoiseMarginProfUsThresholdUs OBJECT-TYPE SYNTAX Unsigned32(0..200000000) UNITS "bits/second" MAX-ACCESS read-create STATUS current DESCRIPTION "Data Rate Threshold Up shift for upstream direction. An 'Up-shift rate change' event is triggered when the actual upstream data rate exceeds, by more than the threshold, the data rate at the last entry into Showtime. The parameter is coded in bit/s. Unit: bits/second " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.6" DEFVAL { 0 } ::= { vdsl2NoiseMarginProfEntry 19 } vdsl2NoiseMarginProfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. When 'active' is set, the system will validate the profile. Before a profile can be deleted or taken out of service (by setting this object to 'destroy' or 'outOfService'), it must be not referenced from all associated lines. " ::= { vdsl2NoiseMarginProfEntry 20 } -- vdsl2DelayInpProfTable vdsl2DelayInpProfTable OBJECT-TYPE SYNTAX SEQUENCE OF Vdsl2DelayInpProfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table vdsl2DelayInpProfTable contains VDSL2 delay inp configuration. The index of this table is vdsl2DelayInpProfName. A default profile with an index of 'DEFVAL' will always exist and its parameters will be set to vendor-specific values, unless otherwise specified in this document. " ::= { vdsl2ProfileTIMode 8 } vdsl2DelayInpProfEntry OBJECT-TYPE SYNTAX Vdsl2DelayInpProfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table vdsl2DelayInpProfTable contains VDSL2 delay inp configuration. The index of this entry is vdsl2DelayInpProfName. A default profile with an index of 'DEFVAL' will always exist and its parameters will be set to vendor-specific values, unless otherwise specified in this document. " INDEX { IMPLIED vdsl2DelayInpProfName } ::= { vdsl2DelayInpProfTable 1 } Vdsl2DelayInpProfEntry ::= SEQUENCE { vdsl2DelayInpProfName OCTET STRING, vdsl2DelayInpProfForceINP Vdsl2ForceINP, vdsl2DelayInpProfCh1MaxDelayDs Unsigned32, vdsl2DelayInpProfCh1MaxDelayUs Unsigned32, vdsl2DelayInpProfCh1MinProtectionDs Vdsl2SymbolProtectionDs, vdsl2DelayInpProfCh1MinProtectionUs Vdsl2SymbolProtectionUs, vdsl2DelayInpProfCh2MaxDelayDs Unsigned32, vdsl2DelayInpProfCh2MaxDelayUs Unsigned32, vdsl2DelayInpProfCh2MinProtectionDs Vdsl2SymbolProtectionDs, vdsl2DelayInpProfCh2MinProtectionUs Vdsl2SymbolProtectionUs, vdsl2DelayInpProfRowStatus RowStatus, vdsl2DelayInpProfCh1PhyRcontrolDs Vdsl2PhyRControl, vdsl2DelayInpProfCh1PhyRcontrolUs Vdsl2PhyRControl, vdsl2DelayInpProfCh1INPmaxDs Vdsl2SymbolProtectionDs, vdsl2DelayInpProfCh1INPmaxUs Vdsl2SymbolProtectionUs, vdsl2DelayInpProfCh1MinRtxRatioDs Integer32, vdsl2DelayInpProfCh1MinRtxRatioUs Integer32, vdsl2DelayInpProfCh1MinRSoverheadDs Integer32, vdsl2DelayInpProfCh1MinRSoverheadUs Integer32, vdsl2DelayInpProfCh2PhyRcontrolDs Vdsl2PhyRControl, vdsl2DelayInpProfCh2PhyRcontrolUs Vdsl2PhyRControl, vdsl2DelayInpProfCh2INPmaxDs Vdsl2SymbolProtectionDs, vdsl2DelayInpProfCh2INPmaxUs Vdsl2SymbolProtectionUs, vdsl2DelayInpProfCh2MinRtxRatioDs Integer32, vdsl2DelayInpProfCh2MinRtxRatioUs Integer32, vdsl2DelayInpProfCh2MinRSoverheadDs Integer32, vdsl2DelayInpProfCh2MinRSoverheadUs Integer32, hwvdsl2DelayInpProfCh1MaxDelayRtxDs Unsigned32, hwvdsl2DelayInpProfCh1MaxDelayRtxUs Unsigned32, hwvdsl2DelayInpProfCh1MinDelayRtxDs Unsigned32, hwvdsl2DelayInpProfCh1MinDelayRtxUs Unsigned32, hwvdsl2DelayInpProfCh1MinInpShineRtxDs Unsigned32, hwvdsl2DelayInpProfCh1MinInpShineRtxUs Unsigned32, hwvdsl2DelayInpProfCh1MinInp8ShineRtxDs Unsigned32, hwvdsl2DelayInpProfCh1MinInp8ShineRtxUs Unsigned32, hwvdsl2DelayInpProfCh1ShineRatioRtxDs Unsigned32, hwvdsl2DelayInpProfCh1ShineRatioRtxUs Unsigned32, hwvdsl2DelayInpProfCh1MinInpReinRtxDs Unsigned32, hwvdsl2DelayInpProfCh1MinInpReinRtxUs Unsigned32, hwvdsl2DelayInpProfCh1MinInp8ReinRtxDs Unsigned32, hwvdsl2DelayInpProfCh1MinInp8ReinRtxUs Unsigned32, hwvdsl2DelayInpProfCh1IatReinRtxDs INTEGER, hwvdsl2DelayInpProfCh1IatReinRtxUs INTEGER } vdsl2DelayInpProfName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object identifies a row in this table." REFERENCE "DSL Forum TR-90, paragraph 5.1.4" ::= { vdsl2DelayInpProfEntry 1 } vdsl2DelayInpProfForceINP OBJECT-TYPE SYNTAX Vdsl2ForceINP MAX-ACCESS read-create STATUS current DESCRIPTION "This parameter indicates that the framer settings of the bearer shall be selected such that the impulse noise protection computed according to the formula specified in the relevant Recommendation is greater or equal to the minimal impulse noise protection requirement. This flag shall have the same value for all the bearers of one line in the same direction. " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.5" DEFVAL { force } ::= { vdsl2DelayInpProfEntry 2 } vdsl2DelayInpProfCh1MaxDelayDs OBJECT-TYPE SYNTAX Unsigned32(0..200) UNITS "milliseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "If retransmission is not used in downstream direction,this parameter is maximum interleave delay on downstream direction. The maximum one-way interleaving delay introduced by the PMS-TC on Downstream direction. The XTUs shall choose the S (factor) and D (depth) values such that the actual one-way interleaving delay (Vdsl2ChanStatusActDelay) is as close as possible to, but less than or equal to, Vdsl2ChanConfMaxDelayDs. The delay is coded in ms, with the value 0 indicating no delay bound is being imposed. Unit: milliseconds " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.2" DEFVAL { 20 } ::= { vdsl2DelayInpProfEntry 3 } vdsl2DelayInpProfCh1MaxDelayUs OBJECT-TYPE SYNTAX Unsigned32(0..200) UNITS "milliseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "If retransmission is not used in upstream direction. The maximum one-way interleaving delay introduced by the PMS-TC on Upstream direction. The XTUs shall choose the S (factor) and D (depth) values such that the actual one-way interleaving delay (Vdsl2ChanStatusActDelay) is as close as possible to, but less than or equal to, Vdsl2ChanConfMaxDelayUs. The delay is coded in ms, with the value 0 indicating no delay bound is being imposed. Unit: milliseconds " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.2" DEFVAL { 20 } ::= { vdsl2DelayInpProfEntry 4 } vdsl2DelayInpProfCh1MinProtectionDs OBJECT-TYPE SYNTAX Vdsl2SymbolProtectionDs UNITS "symbols" MAX-ACCESS read-create STATUS current DESCRIPTION "If retransmission is not used in downstream direction,this parameter is minimum impulse noise protection for the bearer channel on downstream direction. The minimum impulse noise protection for the bearer channel, expressed in symbols. The parameter can take the following values: noProtection (i.e., INP not required), halfSymbol (i.e., INP length is 1/2 symbol) and 1-16 symbols in steps of 1 symbol. Unit: symbols " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.3" DEFVAL { noProtection } ::= { vdsl2DelayInpProfEntry 5 } vdsl2DelayInpProfCh1MinProtectionUs OBJECT-TYPE SYNTAX Vdsl2SymbolProtectionUs UNITS "symbols" MAX-ACCESS read-create STATUS current DESCRIPTION "If retransmission is not used in upstream direction,this parameter is minimum impulse noise protection for the bearer channel on upstream direction. The minimum impulse noise protection for the bearer channel, expressed in symbols. The parameter can take the following values: noProtection (i.e., INP not required), halfSymbol (i.e., INP length is 1/2 symbol) and 1-16 symbols in steps of 1 symbol. Unit: symbols " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.3" DEFVAL { noProtection } ::= { vdsl2DelayInpProfEntry 6 } vdsl2DelayInpProfCh2MaxDelayDs OBJECT-TYPE SYNTAX Unsigned32(0..200) UNITS "milliseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "Maximum Interleave Delay on Downstream direction. The maximum one-way interleaving delay introduced by the PMS-TC on Downstream direction. The XTUs shall choose the S (factor) and D (depth) values such that the actual one-way interleaving delay (Vdsl2ChanStatusActDelay) is as close as possible to, but less than or equal to, Vdsl2ChanConfMaxDelayDs. The delay is coded in ms, with the value 0 indicating no delay bound is being imposed. Unit: milliseconds " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.2" DEFVAL { 20 } ::= { vdsl2DelayInpProfEntry 7 } vdsl2DelayInpProfCh2MaxDelayUs OBJECT-TYPE SYNTAX Unsigned32(0..200) UNITS "milliseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "Maximum Interleave Delay on Upstream direction. The maximum one-way interleaving delay introduced by the PMS-TC on Upstream direction. The XTUs shall choose the S (factor) and D (depth) values such that the actual one-way interleaving delay (Vdsl2ChanStatusActDelay) is as close as possible to, but less than or equal to, Vdsl2ChanConfMaxDelayUs. The delay is coded in ms, with the value 0 indicating no delay bound is being imposed. Unit: milliseconds " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.2" DEFVAL { 20 } ::= { vdsl2DelayInpProfEntry 8 } vdsl2DelayInpProfCh2MinProtectionDs OBJECT-TYPE SYNTAX Vdsl2SymbolProtectionDs UNITS "symbols" MAX-ACCESS read-create STATUS current DESCRIPTION "Minimum Impulse Noise Protection on Downstream direction. The minimum impulse noise protection for the bearer channel, expressed in symbols. The parameter can take the following values: noProtection (i.e., INP not required), halfSymbol (i.e., INP length is 1/2 symbol) and 1-16 symbols in steps of 1 symbol. Unit: symbols " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.3" DEFVAL { noProtection } ::= { vdsl2DelayInpProfEntry 9 } vdsl2DelayInpProfCh2MinProtectionUs OBJECT-TYPE SYNTAX Vdsl2SymbolProtectionUs UNITS "symbols" MAX-ACCESS read-create STATUS current DESCRIPTION "Minimum Impulse Noise Protection on Upstream direction. The minimum impulse noise protection for the bearer channel, expressed in symbols. The parameter can take the following values: noProtection (i.e., INP not required), halfSymbol (i.e., INP length is 1/2 symbol) and 1-16 symbols in steps of 1 symbol. Unit: symbols " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.3" DEFVAL { noProtection } ::= { vdsl2DelayInpProfEntry 10 } vdsl2DelayInpProfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. When 'active' is set, the system will validate the profile. Before a profile can be deleted or taken out of service (by setting this object to 'destroy' or 'outOfService'), it must be not referenced from all associated lines. " ::= { vdsl2DelayInpProfEntry 11 } vdsl2DelayInpProfCh1PhyRcontrolDs OBJECT-TYPE SYNTAX Vdsl2PhyRControl MAX-ACCESS read-write STATUS current DESCRIPTION "To enable or disable the retransmission function on downstream direction." DEFVAL { 2 } ::= { vdsl2DelayInpProfEntry 12 } vdsl2DelayInpProfCh1PhyRcontrolUs OBJECT-TYPE SYNTAX Vdsl2PhyRControl MAX-ACCESS read-write STATUS current DESCRIPTION "To enable or disable the retransmission function on upstream direction." DEFVAL { 2 } ::= { vdsl2DelayInpProfEntry 13 } vdsl2DelayInpProfCh1INPmaxDs OBJECT-TYPE SYNTAX Vdsl2SymbolProtectionDs UNITS "DMT Symbol" MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum Impulse Noise Protection on downstream direction. Options: 1. noProtection(1) 2. halfSymbol(2) 3. singleSymbol(3) 4. twoSymbols(4) 5. threeSymbols(5) 6. fourSymbols(6) 7. fiveSymbols(7) 8. sixSymbols(8) 9. sevenSymbols(9) 10. eightSymbols(10) 11. nineSymbols(11) 12. tenSymbols(12) 13. elevenSymbols(13) 14. twelveSymbols(14) 15. thirteeSymbols(15) 16. fourteenSymbols(16) 17. fifteenSymbols(17) 18. sixteenSymbols(18) The value multiply 1/2 is the real value of Noise Protection values. Unit: DMT Symbol " DEFVAL { 1 } ::= { vdsl2DelayInpProfEntry 14 } vdsl2DelayInpProfCh1INPmaxUs OBJECT-TYPE SYNTAX Vdsl2SymbolProtectionUs UNITS "DMT Symbol" MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum Impulse Noise Protection on upstream direction. Options: 1. noProtection(1) 2. halfSymbol(2) 3. singleSymbol(3) 4. twoSymbols(4) 5. threeSymbols(5) 6. fourSymbols(6) 7. fiveSymbols(7) 8. sixSymbols(8) 9. sevenSymbols(9) 10. eightSymbols(10) 11. nineSymbols(11) 12. tenSymbols(12) 13. elevenSymbols(13) 14. twelveSymbols(14) 15. thirteeSymbols(15) 16. fourteenSymbols(16) 17. fifteenSymbols(17) 18. sixteenSymbols(18) The value multiply 1/2 is the real value of Noise Protection values. Unit: DMT Symbol " DEFVAL { 1 } ::= { vdsl2DelayInpProfEntry 15 } vdsl2DelayInpProfCh1MinRtxRatioDs OBJECT-TYPE SYNTAX Integer32 (0..255) UNITS "1/256" MAX-ACCESS read-write STATUS current DESCRIPTION "Minimum rtxratio on downstream direction. Unit: 1/256 " DEFVAL { 0 } ::= { vdsl2DelayInpProfEntry 16 } vdsl2DelayInpProfCh1MinRtxRatioUs OBJECT-TYPE SYNTAX Integer32 (0..255) UNITS "1/256" MAX-ACCESS read-write STATUS current DESCRIPTION "Minimum rtxratio on upstream direction. Unit: 1/256 " DEFVAL { 0 } ::= { vdsl2DelayInpProfEntry 17 } vdsl2DelayInpProfCh1MinRSoverheadDs OBJECT-TYPE SYNTAX Integer32 (0..128) UNITS "1/256" MAX-ACCESS read-write STATUS current DESCRIPTION "The minimum value of R/N on downstream direction. Unit: 1/256 " DEFVAL { 0 } ::= { vdsl2DelayInpProfEntry 18 } vdsl2DelayInpProfCh1MinRSoverheadUs OBJECT-TYPE SYNTAX Integer32 (0..128) UNITS "1/256" MAX-ACCESS read-write STATUS current DESCRIPTION "The minimum value of R/N on upstream direction. Unit: 1/256 " DEFVAL { 0 } ::= { vdsl2DelayInpProfEntry 19 } vdsl2DelayInpProfCh2PhyRcontrolDs OBJECT-TYPE SYNTAX Vdsl2PhyRControl MAX-ACCESS read-write STATUS current DESCRIPTION "To enable or disable the retransmission function on downstream direction." DEFVAL { 2 } ::= { vdsl2DelayInpProfEntry 20 } vdsl2DelayInpProfCh2PhyRcontrolUs OBJECT-TYPE SYNTAX Vdsl2PhyRControl MAX-ACCESS read-write STATUS current DESCRIPTION "To enable or disable the retransmission function on upstream direction." DEFVAL { 2 } ::= { vdsl2DelayInpProfEntry 21 } vdsl2DelayInpProfCh2INPmaxDs OBJECT-TYPE SYNTAX Vdsl2SymbolProtectionDs UNITS "DMT Symbol" MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum Impulse Noise Protection on downstream direction. Options: 1. noProtection(1) 2. halfSymbol(2) 3. singleSymbol(3) 4. twoSymbols(4) 5. threeSymbols(5) 6. fourSymbols(6) 7. fiveSymbols(7) 8. sixSymbols(8) 9. sevenSymbols(9) 10. eightSymbols(10) 11. nineSymbols(11) 12. tenSymbols(12) 13. elevenSymbols(13) 14. twelveSymbols(14) 15. thirteeSymbols(15) 16. fourteenSymbols(16) 17. fifteenSymbols(17) 18. sixteenSymbols(18) The value multiply 1/2 is the real value of Noise Protection values. Unit: DMT Symbol " DEFVAL { 1 } ::= { vdsl2DelayInpProfEntry 22 } vdsl2DelayInpProfCh2INPmaxUs OBJECT-TYPE SYNTAX Vdsl2SymbolProtectionUs UNITS "DMT Symbol" MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum Impulse Noise Protection on upstream direction. Options: 1. noProtection(1) 2. halfSymbol(2) 3. singleSymbol(3) 4. twoSymbols(4) 5. threeSymbols(5) 6. fourSymbols(6) 7. fiveSymbols(7) 8. sixSymbols(8) 9. sevenSymbols(9) 10. eightSymbols(10) 11. nineSymbols(11) 12. tenSymbols(12) 13. elevenSymbols(13) 14. twelveSymbols(14) 15. thirteeSymbols(15) 16. fourteenSymbols(16) 17. fifteenSymbols(17) 18. sixteenSymbols(18) The value multiply 1/2 is the real value of Noise Protection values. Unit: DMT Symbol " DEFVAL { 1 } ::= { vdsl2DelayInpProfEntry 23 } vdsl2DelayInpProfCh2MinRtxRatioDs OBJECT-TYPE SYNTAX Integer32 (0..255) UNITS "1/256" MAX-ACCESS read-write STATUS current DESCRIPTION "Minimum rtxratio on downstream direction. Unit: 1/256 " DEFVAL { 0 } ::= { vdsl2DelayInpProfEntry 24 } vdsl2DelayInpProfCh2MinRtxRatioUs OBJECT-TYPE SYNTAX Integer32 (0..255) UNITS "1/256" MAX-ACCESS read-write STATUS current DESCRIPTION "Minimum rtxratio on upstream direction. Unit: 1/256 " DEFVAL { 0 } ::= { vdsl2DelayInpProfEntry 25 } vdsl2DelayInpProfCh2MinRSoverheadDs OBJECT-TYPE SYNTAX Integer32 (0..128) UNITS "1/256" MAX-ACCESS read-write STATUS current DESCRIPTION "The minimum value of R/N on downstream direction. Unit: 1/256 " DEFVAL { 0 } ::= { vdsl2DelayInpProfEntry 26 } vdsl2DelayInpProfCh2MinRSoverheadUs OBJECT-TYPE SYNTAX Integer32 (0..128) UNITS "1/256" MAX-ACCESS read-write STATUS current DESCRIPTION "The minimum value of R/N on upstream direction. Unit: 1/256 " DEFVAL { 0 } ::= { vdsl2DelayInpProfEntry 27 } hwvdsl2DelayInpProfCh1MaxDelayRtxDs OBJECT-TYPE SYNTAX Unsigned32(1..63) UNITS "milliseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "If retransmission is used in downstream direction, this parameter specifies the maximum for the instantaneous delay due to the effect of retransmission only (see G.998.4 for detailed specification). The delay ranges from 1 to 63 ms by steps of 1 ms. Unit: milliseconds " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.11" ::= { vdsl2DelayInpProfEntry 28 } hwvdsl2DelayInpProfCh1MaxDelayRtxUs OBJECT-TYPE SYNTAX Unsigned32(1..63) UNITS "milliseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "If retransmission is used in upstream direction, this parameter specifies the maximum for the instantaneous delay due to the effect of retransmission only (see G.998.4 for detailed specification). The delay ranges from 1 to 63 ms by steps of 1 ms. Unit: milliseconds " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.11" ::= { vdsl2DelayInpProfEntry 29 } hwvdsl2DelayInpProfCh1MinDelayRtxDs OBJECT-TYPE SYNTAX Unsigned32(0..63) UNITS "milliseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "If retransmission is used in downstream direction, this parameter specifies the minimum for the instantaneous delay due to the effect of retransmission only (see G.998.4 for detailed specification). The delay ranges from 0 to 63 ms by steps of 1 ms. Unit: milliseconds " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.12" ::= { vdsl2DelayInpProfEntry 30 } hwvdsl2DelayInpProfCh1MinDelayRtxUs OBJECT-TYPE SYNTAX Unsigned32(0..63) UNITS "milliseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "If retransmission is used in upstream direction, this parameter specifies the minimum for the instantaneous delay due to the effect of retransmission only (see G.998.4 for detailed specification). The delay ranges from 0 to 63 ms by steps of 1 ms. Unit: milliseconds " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.12" ::= { vdsl2DelayInpProfEntry 31 } hwvdsl2DelayInpProfCh1MinInpShineRtxDs OBJECT-TYPE SYNTAX Unsigned32(0..63) UNITS "symbols" MAX-ACCESS read-create STATUS current DESCRIPTION "If retransmission is used in downstream direction, this parameter specifies the minimum impulse noise protection against SHINE for the bearer channel if it is transported over DMT symbols with a subcarrier spacing of 4.3125 kHz. The impulse noise protection is expressed in DMT symbols with a subcarrier spacing of 4.3125 kHz and can take any integer value from 0 to 63, inclusive. Unit: symbols " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.13" DEFVAL { 0 } ::= { vdsl2DelayInpProfEntry 32 } hwvdsl2DelayInpProfCh1MinInpShineRtxUs OBJECT-TYPE SYNTAX Unsigned32(0..63) UNITS "symbols" MAX-ACCESS read-create STATUS current DESCRIPTION "If retransmission is used in upstream direction, this parameter specifies the minimum impulse noise protection against SHINE for the bearer channel if it is transported over DMT symbols with a subcarrier spacing of 4.3125 kHz. The impulse noise protection is expressed in DMT symbols with a subcarrier spacing of 4.3125 kHz and can take any integer value from 0 to 63, inclusive. Unit: symbols " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.13" DEFVAL { 0 } ::= { vdsl2DelayInpProfEntry 33 } hwvdsl2DelayInpProfCh1MinInp8ShineRtxDs OBJECT-TYPE SYNTAX Unsigned32(0..127) UNITS "symbols" MAX-ACCESS read-create STATUS current DESCRIPTION "If retransmission is used in downstream direction, this parameter specifies the minimum impulse noise protection against SHINE for the bearer channel if it is transported over DMT symbols with a subcarrier spacing of 8.625 kHz. The impulse noise protection is expressed in DMT symbols with a subcarrier spacing of 8.625 kHz and can take any integer value from 0 to 127, inclusive. Unit: symbols " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.14" DEFVAL { 0 } ::= { vdsl2DelayInpProfEntry 34 } hwvdsl2DelayInpProfCh1MinInp8ShineRtxUs OBJECT-TYPE SYNTAX Unsigned32(0..127) UNITS "symbols" MAX-ACCESS read-create STATUS current DESCRIPTION "If retransmission is used in upstream direction, this parameter specifies the minimum impulse noise protection against SHINE for the bearer channel if it is transported over DMT symbols with a subcarrier spacing of 8.625 kHz. The impulse noise protection is expressed in DMT symbols with a subcarrier spacing of 8.625 kHz and can take any integer value from 0 to 127, inclusive. Unit: symbols " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.14" DEFVAL { 0 } ::= { vdsl2DelayInpProfEntry 35 } hwvdsl2DelayInpProfCh1ShineRatioRtxDs OBJECT-TYPE SYNTAX Unsigned32(0..100) MAX-ACCESS read-create STATUS current DESCRIPTION "If retransmission is used in downstream direction, this parameter specifies the SHINE ratio (detailed definition see G.998.4). The values range from 0 to 0.100 in increments of 0.001. " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.15" DEFVAL { 0 } ::= { vdsl2DelayInpProfEntry 36 } hwvdsl2DelayInpProfCh1ShineRatioRtxUs OBJECT-TYPE SYNTAX Unsigned32(0..100) MAX-ACCESS read-create STATUS current DESCRIPTION "If retransmission is used in upstream direction, this parameter specifies the SHINE ratio (detailed definition see G.998.4). The values range from 0 to 0.100 in increments of 0.001. " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.15" DEFVAL { 0 } ::= { vdsl2DelayInpProfEntry 37 } hwvdsl2DelayInpProfCh1MinInpReinRtxDs OBJECT-TYPE SYNTAX Unsigned32(0..7) MAX-ACCESS read-create STATUS current DESCRIPTION "If retransmission is used in downstream direction, this parameter specifies the minimum impulse noise protection against REIN for the bearer channel if it is transported over DMT symbols with a subcarrier spacing of 4.3125 kHz. The impulse noise protection is expressed in DMT symbols with a subcarrier spacing of 4.3125 kHz and can take any integer value from 0 to 7, inclusive. " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.16" DEFVAL { 0 } ::= { vdsl2DelayInpProfEntry 38 } hwvdsl2DelayInpProfCh1MinInpReinRtxUs OBJECT-TYPE SYNTAX Unsigned32(0..7) MAX-ACCESS read-create STATUS current DESCRIPTION "If retransmission is used in upstream direction, this parameter specifies the minimum impulse noise protection against REIN for the bearer channel if it is transported over DMT symbols with a subcarrier spacing of 4.3125 kHz. The impulse noise protection is expressed in DMT symbols with a subcarrier spacing of 4.3125 kHz and can take any integer value from 0 to 7, inclusive. " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.16" DEFVAL { 0 } ::= { vdsl2DelayInpProfEntry 39 } hwvdsl2DelayInpProfCh1MinInp8ReinRtxDs OBJECT-TYPE SYNTAX Unsigned32(0..13) MAX-ACCESS read-create STATUS current DESCRIPTION "If retransmission is used in downstream direction, this parameter specifies the minimum impulse noise protection against REIN for the bearer channel if it is transported over DMT symbols with a subcarrier spacing of 8.625 kHz. The impulse noise protection is expressed in DMT symbols with a subcarrier spacing of 8.625 kHz and can take any integer value from 0 to 13, inclusive. " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.17" DEFVAL { 0 } ::= { vdsl2DelayInpProfEntry 40 } hwvdsl2DelayInpProfCh1MinInp8ReinRtxUs OBJECT-TYPE SYNTAX Unsigned32(0..13) MAX-ACCESS read-create STATUS current DESCRIPTION "If retransmission is used in upstream direction, this parameter specifies the minimum impulse noise protection against REIN for the bearer channel if it is transported over DMT symbols with a subcarrier spacing of 8.625 kHz. The impulse noise protection is expressed in DMT symbols with a subcarrier spacing of 8.625 kHz and can take any integer value from 0 to 13, inclusive. " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.17" DEFVAL { 0 } ::= { vdsl2DelayInpProfEntry 41 } hwvdsl2DelayInpProfCh1IatReinRtxDs OBJECT-TYPE SYNTAX INTEGER { frequency100Hz(0), frequency120Hz(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "If retransmission is used in downstream direction, this parameter specifies the inter-arrival time that shall be assumed for REIN protection. Options: 1. frequency100Hz(0) - an inter-arrival time derived from a REIN at 100 Hz 2. frequency120Hz(1) - an inter-arrival time derived from a REIN at 120 Hz " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.18" DEFVAL { frequency100Hz } ::= { vdsl2DelayInpProfEntry 42 } hwvdsl2DelayInpProfCh1IatReinRtxUs OBJECT-TYPE SYNTAX INTEGER { frequency100Hz(0), frequency120Hz(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "If retransmission is used in upstream direction, this parameter specifies the inter-arrival time that shall be assumed for REIN protection. Options: 1. frequency100Hz(0) - an inter-arrival time derived from a REIN at 100 Hz 2. frequency120Hz(1) - an inter-arrival time derived from a REIN at 120 Hz " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.18" DEFVAL { frequency100Hz } ::= { vdsl2DelayInpProfEntry 43 } -- vdsl2ChConfProfileTable vdsl2ChConfProfileTable OBJECT-TYPE SYNTAX SEQUENCE OF Vdsl2ChConfProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table vdsl2ChConfProfileTable contains VDSL2 channel profile configuration. The index of this table is vdsl2ChConfProfProfileName. A default profile with an index of 'DEFVAL' will always exist and its parameters will be set to vendor-specific values, unless otherwise specified in this document. " ::= { vdsl2ProfileChannel 1 } vdsl2ChConfProfileEntry OBJECT-TYPE SYNTAX Vdsl2ChConfProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table vdsl2ChConfProfileTable contains VDSL2 channel profile configuration. The index of this entry is vdsl2ChConfProfProfileName. A default profile with an index of 'DEFVAL' will always exist and its parameters will be set to vendor-specific values, unless otherwise specified in this document. " INDEX { IMPLIED vdsl2ChConfProfProfileName } ::= { vdsl2ChConfProfileTable 1 } Vdsl2ChConfProfileEntry ::= SEQUENCE { vdsl2ChConfProfProfileName OCTET STRING, vdsl2ChConfProfMinDataRateDs Unsigned32, vdsl2ChConfProfMinDataRateUs Unsigned32, vdsl2ChConfProfMinResDataRateDs Unsigned32, vdsl2ChConfProfMinResDataRateUs Unsigned32, vdsl2ChConfProfMaxDataRateDs Unsigned32, vdsl2ChConfProfMaxDataRateUs Unsigned32, vdsl2ChConfProfMinDataRateLowPwrDs Unsigned32, vdsl2ChConfProfMinDataRateLowPwrUs Unsigned32, vdsl2ChConfProfMaxDelayDs Unsigned32, vdsl2ChConfProfMaxDelayUs Unsigned32, vdsl2ChConfProfMinProtectionDs Vdsl2SymbolProtectionDs, vdsl2ChConfProfMinProtectionUs Vdsl2SymbolProtectionUs, vdsl2ChConfProfMaxBerDs Vdsl2MaxBer, vdsl2ChConfProfMaxBerUs Vdsl2MaxBer, vdsl2ChConfProfUsDataRateDs Unsigned32, vdsl2ChConfProfDsDataRateDs Unsigned32, vdsl2ChConfProfUsDataRateUs Unsigned32, vdsl2ChConfProfDsDataRateUs Unsigned32, vdsl2ChConfProfImaEnabled TruthValue, vdsl2ChConfProfDataPathMode Vdsl2DataPathMode, vdsl2ChConfProfRowStatus RowStatus, vdsl2ChConfProfPhyRcontrolDs Vdsl2PhyRControl, vdsl2ChConfProfPhyRcontrolUs Vdsl2PhyRControl, vdsl2ChConfProfInpMaxDs Vdsl2SymbolProtectionDs, vdsl2ChConfProfInpMaxUs Vdsl2SymbolProtectionDs, vdsl2ChConfProfMinRtxRatioDs Unsigned32, vdsl2ChConfProfMinRtxRatioUs Unsigned32, vdsl2ChConfProfMinRSoverheadDs Unsigned32, vdsl2ChConfProfMinRSoverheadUs Unsigned32, vdsl2ChConfProfErasureDecoding Vdsl2ProfSwitchType, vdsl2ChConfProfMinSosBrDs Unsigned32, vdsl2ChConfProfMinSosBrUs Unsigned32, vdsl2ChConfProfMinEtrRtxDs Unsigned32, vdsl2ChConfProfMinEtrRtxUs Unsigned32, vdsl2ChConfProfMaxEtrRtxDs Unsigned32, vdsl2ChConfProfMaxEtrRtxUs Unsigned32, vdsl2ChConfProfMaxNdrRtxDs Unsigned32, vdsl2ChConfProfMaxNdrRtxUs Unsigned32, vdsl2ChConfProfMaxDelayRtxDs Unsigned32, vdsl2ChConfProfMaxDelayRtxUs Unsigned32, vdsl2ChConfProfMinDelayRtxDs Unsigned32, vdsl2ChConfProfMinDelayRtxUs Unsigned32, vdsl2ChConfProfMinInpShineRtxDs Unsigned32, vdsl2ChConfProfMinInpShineRtxUs Unsigned32, vdsl2ChConfProfMinInp8ShineRtxDs Unsigned32, vdsl2ChConfProfMinInp8ShineRtxUs Unsigned32, vdsl2ChConfProfShineRatioRtxDs Unsigned32, vdsl2ChConfProfShineRatioRtxUs Unsigned32, vdsl2ChConfProfMinInpReinRtxDs Unsigned32, vdsl2ChConfProfMinInpReinRtxUs Unsigned32, vdsl2ChConfProfMinInp8ReinRtxDs Unsigned32, vdsl2ChConfProfMinInp8ReinRtxUs Unsigned32, vdsl2ChConfProfIatReinRtxDs INTEGER, vdsl2ChConfProfIatReinRtxUs INTEGER, vdsl2ChConfProfInitPolicy INTEGER } vdsl2ChConfProfProfileName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object identifies a row in this table. " ::= { vdsl2ChConfProfileEntry 1 } vdsl2ChConfProfMinDataRateDs OBJECT-TYPE SYNTAX Unsigned32(32000..200000000) UNITS "bits/second" MAX-ACCESS read-create STATUS current DESCRIPTION "If retransmission is not used in downstream direction,this parameter specifics minimum data rate for the bearer channel on downstream direction. The rate is coded in steps of 1000 bit/s. Unit: bits/second " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.1" ::= { vdsl2ChConfProfileEntry 2 } vdsl2ChConfProfMinDataRateUs OBJECT-TYPE SYNTAX Unsigned32(32000..200000000) UNITS "bits/second" MAX-ACCESS read-create STATUS current DESCRIPTION "If retransmission is not used in upstream direction,this parameter specifics minimum data rate for the bearer channel on upstream direction. The rate is coded in steps of 1000 bit/s Unit: bits/second " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.1" ::= { vdsl2ChConfProfileEntry 3 } vdsl2ChConfProfMinResDataRateDs OBJECT-TYPE SYNTAX Unsigned32(32000..200000000) UNITS "bits/second" MAX-ACCESS read-create STATUS current DESCRIPTION "Minimum Reserved Data Rate on Downstream direction. The minimum reserved net data rate for the bearer channel, coded in bit/s. This parameter is used only if the Rate Adaptation Mode in the direction of the bearer channel (i.e., Vdsl2LineConfRaModeDs) is set to DynamicRa. Unit: bits/second " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.1" ::= { vdsl2ChConfProfileEntry 4 } vdsl2ChConfProfMinResDataRateUs OBJECT-TYPE SYNTAX Unsigned32(32000..200000000) UNITS "bits/second" MAX-ACCESS read-create STATUS current DESCRIPTION "Minimum Reserved Data Rate on Upstream direction. The minimum reserved net data rate for the bearer channel, coded in bit/s. This parameter is used only if the Rate Adaptation Mode in the direction of the bearer channel (i.e., Vdsl2LineConfRaModeUs) is set to DynamicRa. Unit: bits/second " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.1" ::= { vdsl2ChConfProfileEntry 5 } vdsl2ChConfProfMaxDataRateDs OBJECT-TYPE SYNTAX Unsigned32(32000..200000000) UNITS "bits/second" MAX-ACCESS read-create STATUS current DESCRIPTION "If retransmission is not used in downstream direction,this parameter specifics maximum data rate for the bearer channel on downstream direction. The rate is coded in steps of 1000 bit/s. Unit: bits/second " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.1" ::= { vdsl2ChConfProfileEntry 6 } vdsl2ChConfProfMaxDataRateUs OBJECT-TYPE SYNTAX Unsigned32(32000..200000000) UNITS "bits/second" MAX-ACCESS read-create STATUS current DESCRIPTION "If retransmission is not used in upstream direction,this parameter specifics maximum data rate for the bearer channel on upstream direction. The rate is coded in steps of 1000 bit/s. Unit: bits/second " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.1" ::= { vdsl2ChConfProfileEntry 7 } vdsl2ChConfProfMinDataRateLowPwrDs OBJECT-TYPE SYNTAX Unsigned32(0..200000000) UNITS "bits/second" MAX-ACCESS read-create STATUS current DESCRIPTION "Minimum Data Rate in Low Power state on Downstream direction. The minimum net data rate for the bearer channel, coded in bit/s, during the low power state (L1 in G.992.2, L2 in G.992.3). Unit: bits/second " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.1" ::= { vdsl2ChConfProfileEntry 8 } vdsl2ChConfProfMinDataRateLowPwrUs OBJECT-TYPE SYNTAX Unsigned32(0..200000000) UNITS "bits/second" MAX-ACCESS read-create STATUS current DESCRIPTION "Minimum Data Rate in Low Power state on Upstream direction. The minimum net data rate for the bearer channel, coded in bit/s, during the low power state (L1 in G.992.2, L2 in G.992.3). Unit: bits/second " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.1" ::= { vdsl2ChConfProfileEntry 9 } vdsl2ChConfProfMaxDelayDs OBJECT-TYPE SYNTAX Unsigned32 (0..200 | 255) UNITS "milliseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "If retransmission is not used in downstream direction,this parameter is maximum interleave delay on downstream direction. The maximum one-way interleaving delay introduced by the PMS-TC on Downstream direction. The XTUs shall choose the S (factor) and D (depth) values such that the actual one-way interleaving delay (Vdsl2ChanStatusActDelay) is as close as possible to, but less than or equal to, Vdsl2ChanConfMaxDelayDs. The delay is coded in ms, with the value 0 indicating no delay bound is being imposed. The delay is coded in ms, with the special values 0, 1 and 255. - The value 0 indicates no delay bound is being imposed. - The value 1 indicates the Fast Latency Path shall be used in the G.992.1 operating mode and S and D shall be selected such that S <= 1 and D = 1 in ITU-T Recs G.992.2, G.992.3 and G.992.4 operating modes (G.997.1 special value S1). - The value 255 indicates a delay bound of 1 ms in ITU-T Recs G.993.2 (G.997.1 special value S2). Unit: milliseconds " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.2 (Maximum interleaving delay)" ::= { vdsl2ChConfProfileEntry 10 } vdsl2ChConfProfMaxDelayUs OBJECT-TYPE SYNTAX Unsigned32 (0..200 | 255) UNITS "milliseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "If retransmission is not used in upstream direction,this parameter is maximum interleave delay on upstream direction. The maximum one-way interleaving delay introduced by the PMS-TC on Upstream direction. The XTUs shall choose the S (factor) and D (depth) values such that the actual one-way interleaving delay (Vdsl2ChanStatusActDelay) is as close as possible to, but less than or equal to, Vdsl2ChanConfMaxDelayUs. The delay is coded in ms, with the value 0 indicating no delay bound is being imposed. The delay is coded in ms, with the special values 0, 1 and 255. - The value 0 indicates no delay bound is being imposed. - The value 1 indicates the Fast Latency Path shall be used in the G.992.1 operating mode and S and D shall be selected such that S <= 1 and D = 1 in ITU-T Recs G.992.2, G.992.3 and G.992.4 operating modes (G.997.1 special value S1). - The value 255 indicates a delay bound of 1 ms in ITU-T Recs G.993.2 (G.997.1 special value S2). Unit: milliseconds " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.2 (Maximum interleaving delay)" ::= { vdsl2ChConfProfileEntry 11 } vdsl2ChConfProfMinProtectionDs OBJECT-TYPE SYNTAX Vdsl2SymbolProtectionDs UNITS "symbols" MAX-ACCESS read-create STATUS current DESCRIPTION "If retransmission is not used in downstream direction,this parameter is minimum impulse noise protection for the bearer channel on downstream direction. The minimum impulse noise protection for the bearer channel, expressed in symbols. The parameter can take the following values: noProtection (i.e., INP not required), halfSymbol (i.e., INP length is 1/2 symbol) and 1-16 symbols in steps of 1 symbol. Unit: symbols " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.3" DEFVAL { noProtection } ::= { vdsl2ChConfProfileEntry 12 } vdsl2ChConfProfMinProtectionUs OBJECT-TYPE SYNTAX Vdsl2SymbolProtectionUs UNITS "symbols" MAX-ACCESS read-create STATUS current DESCRIPTION "If retransmission is not used in upstream direction,this parameter is minimum impulse noise protection for the bearer channel on upstream direction. The minimum impulse noise protection for the bearer channel, expressed in symbols. The parameter can take the following values: noProtection (i.e., INP not required), halfSymbol (i.e., INP length is 1/2 symbol) and 1-16 symbols in steps of 1 symbol. Unit: symbols " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.3" DEFVAL { noProtection } ::= { vdsl2ChConfProfileEntry 13 } vdsl2ChConfProfMaxBerDs OBJECT-TYPE SYNTAX Vdsl2MaxBer MAX-ACCESS read-create STATUS current DESCRIPTION "Maximum Bit Error Ratio on Downstream direction. The maximum bit error ratio for the bearer channel. The parameter can take the following values (for 1E-3, 1E-5 or 1E-7). Options: 1. eminus3 (1) - 1E-3 2. eminus5 (2) - 1E-5 3. eminus7 (3) - 1E-7 " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.4" DEFVAL { eminus5 } ::= { vdsl2ChConfProfileEntry 14 } vdsl2ChConfProfMaxBerUs OBJECT-TYPE SYNTAX Vdsl2MaxBer MAX-ACCESS read-create STATUS current DESCRIPTION "Maximum Bit Error Ratio on Upstream direction. The maximum bit error ratio for the bearer channel. The parameter can take the following values (for 1E-3, 1E-5 or 1E-7). Options: 1. eminus3 (1) - 1E-3 2. eminus5 (2) - 1E-5 3. eminus7 (3) - 1E-7 " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.4" DEFVAL { eminus5 } ::= { vdsl2ChConfProfileEntry 15 } vdsl2ChConfProfUsDataRateDs OBJECT-TYPE SYNTAX Unsigned32(0..200000000) UNITS "bits/second" MAX-ACCESS read-create STATUS current DESCRIPTION "If retransmission is not used in downstream direction,this parameter is data rate threshold upshift for downstream direction. An 'Up-shift rate change' event is triggered when the actual downstream data rate exceeds, by more than the threshold, the data rate at the last entry into Showtime. The parameter is coded in bit/s. Unit: bits/second " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.8" ::= { vdsl2ChConfProfileEntry 16 } vdsl2ChConfProfDsDataRateDs OBJECT-TYPE SYNTAX Unsigned32(0..200000000) UNITS "bits/second" MAX-ACCESS read-create STATUS current DESCRIPTION "If retransmission is not used in downstream direction,this parameter is data rate threshold downshift for downstream direction. A 'Down-shift rate change' event is triggered when the actual downstream data rate is below the data rate at the last entry into Showtime, by more than the threshold. The parameter is coded in bit/s. Unit: bits/second " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.8" ::= { vdsl2ChConfProfileEntry 17 } vdsl2ChConfProfUsDataRateUs OBJECT-TYPE SYNTAX Unsigned32(0..200000000) UNITS "bits/second" MAX-ACCESS read-create STATUS current DESCRIPTION "If retransmission is not used in upstream direction,this parameter is data rate threshold up shift for upstream direction. An 'Up-shift rate change' event is triggered when the actual upstream data rate exceeds, by more than the threshold, the data rate at the last entry into Showtime. The parameter is coded in bit/s. Unit: bits/second " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.8" ::= { vdsl2ChConfProfileEntry 18 } vdsl2ChConfProfDsDataRateUs OBJECT-TYPE SYNTAX Unsigned32(0..200000000) UNITS "bits/second" MAX-ACCESS read-create STATUS current DESCRIPTION "If retransmission is not used in upstream direction,this parameter is data rate threshold downshift for upstream direction. A 'Down-shift rate change' event is triggered when the actual upstream data rate is below the data rate at the last entry into Showtime, by more than the threshold. The parameter is coded in bit/s. Unit: bits/second " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.8" ::= { vdsl2ChConfProfileEntry 19 } vdsl2ChConfProfImaEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "IMA Mode Enable. The parameter enables the IMA operation mode in the ATM Data Path. Relevant only if the channel is of ATM Data Path. When in 'enable' state, the ATM data path should comply with the requirements for IMA transmission. " REFERENCE "ITU-T G.997.1, paragraph 7.3.4.1" DEFVAL { false } ::= { vdsl2ChConfProfileEntry 20 } vdsl2ChConfProfDataPathMode OBJECT-TYPE SYNTAX Vdsl2DataPathMode MAX-ACCESS read-create STATUS current DESCRIPTION "The channel data path mode. Options: 1. atm(1) - ATM 2. ptm(2) - PTM 3. both(3) - ATM and PTM Huawei defined. " DEFVAL { both } ::= { vdsl2ChConfProfileEntry 21 } vdsl2ChConfProfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. When 'active' is set, the system will validate the profile. Before a profile can be deleted or taken out of service (by setting this object to 'destroy' or 'outOfService'), it must be not referenced from all associated templates. " ::= { vdsl2ChConfProfileEntry 22 } vdsl2ChConfProfPhyRcontrolDs OBJECT-TYPE SYNTAX Vdsl2PhyRControl MAX-ACCESS read-create STATUS current DESCRIPTION "To enable or disable the retransmission function." DEFVAL { disable } ::= { vdsl2ChConfProfileEntry 23 } vdsl2ChConfProfPhyRcontrolUs OBJECT-TYPE SYNTAX Vdsl2PhyRControl MAX-ACCESS read-create STATUS current DESCRIPTION "To enable or disable the retransmission function." DEFVAL { disable } ::= { vdsl2ChConfProfileEntry 24 } vdsl2ChConfProfInpMaxDs OBJECT-TYPE SYNTAX Vdsl2SymbolProtectionDs MAX-ACCESS read-create STATUS current DESCRIPTION "Maximum Impulse Noise Protection on downstream direction." ::= { vdsl2ChConfProfileEntry 25 } vdsl2ChConfProfInpMaxUs OBJECT-TYPE SYNTAX Vdsl2SymbolProtectionDs MAX-ACCESS read-create STATUS current DESCRIPTION "Maximum Impulse Noise Protection on upstream direction." ::= { vdsl2ChConfProfileEntry 26 } vdsl2ChConfProfMinRtxRatioDs OBJECT-TYPE SYNTAX Unsigned32(0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to config the minimum retransmission band width parameter downstream." ::= { vdsl2ChConfProfileEntry 27 } vdsl2ChConfProfMinRtxRatioUs OBJECT-TYPE SYNTAX Unsigned32(0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to config the minimum retransmission band width parameter upstream." ::= { vdsl2ChConfProfileEntry 28 } vdsl2ChConfProfMinRSoverheadDs OBJECT-TYPE SYNTAX Unsigned32(0..128) MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to config the minimum RSoverhead parameter downstream.." ::= { vdsl2ChConfProfileEntry 29 } vdsl2ChConfProfMinRSoverheadUs OBJECT-TYPE SYNTAX Unsigned32(0..128) MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to config the minimum RSoverhead parameter upstream.." ::= { vdsl2ChConfProfileEntry 30 } vdsl2ChConfProfErasureDecoding OBJECT-TYPE SYNTAX Vdsl2ProfSwitchType MAX-ACCESS read-create STATUS current DESCRIPTION "To enable or disable the erasure decoding of a channel. Options: 1. enable(1) 2. disable(2) " DEFVAL { disable } ::= { vdsl2ChConfProfileEntry 31 } vdsl2ChConfProfMinSosBrDs OBJECT-TYPE SYNTAX Unsigned32(0..65535) UNITS "8Kbps" MAX-ACCESS read-create STATUS current DESCRIPTION "This parameter specifies the minimum net data rate required for a valid SOS request in the downstream direction. The valid range of values is from 0 to 524280Kbps in steps of 8Kbps. Unit: 8Kbps " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.1.6" ::= { vdsl2ChConfProfileEntry 32 } vdsl2ChConfProfMinSosBrUs OBJECT-TYPE SYNTAX Unsigned32(0..65535) UNITS "8Kbps" MAX-ACCESS read-create STATUS current DESCRIPTION "This parameter specifies the minimum net data rate required for a valid SOS request in the upstream direction.The valid range of values is from 0 to 524280Kbps in steps of 8Kbps. Unit: 8Kbps " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.1.7" ::= { vdsl2ChConfProfileEntry 33 } vdsl2ChConfProfMinEtrRtxDs OBJECT-TYPE SYNTAX Unsigned32(32000..200000000) UNITS "bits/second" MAX-ACCESS read-create STATUS current DESCRIPTION "If retransmission is used in downstream direction, this parameter specifies the minimum expected throughput for the bearer channel.The values range in steps of 1000 bit/s. " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.1.8" ::= { vdsl2ChConfProfileEntry 34 } vdsl2ChConfProfMinEtrRtxUs OBJECT-TYPE SYNTAX Unsigned32(32000..200000000) UNITS "bits/second" MAX-ACCESS read-create STATUS current DESCRIPTION "If retransmission is used in upstream direction, this parameter specifies the minimum expected throughput for the bearer channel.The values range in steps of 1000 bit/s. " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.1.8" ::= { vdsl2ChConfProfileEntry 35 } vdsl2ChConfProfMaxEtrRtxDs OBJECT-TYPE SYNTAX Unsigned32(32000..200000000) UNITS "bits/second" MAX-ACCESS read-create STATUS current DESCRIPTION "If retransmission is used in downstream direction, this parameter specifies the maximum expected throughput for the bearer channel.The values range in steps of 1000 bit/s. " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.1.9" ::= { vdsl2ChConfProfileEntry 36 } vdsl2ChConfProfMaxEtrRtxUs OBJECT-TYPE SYNTAX Unsigned32(32000..200000000) UNITS "bits/second" MAX-ACCESS read-create STATUS current DESCRIPTION "If retransmission is used in upstream direction, this parameter specifies the maximum expected throughput for the bearer channel.The values range in steps of 1000 bit/s. " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.1.9" ::= { vdsl2ChConfProfileEntry 37 } vdsl2ChConfProfMaxNdrRtxDs OBJECT-TYPE SYNTAX Unsigned32(32000..200000000) UNITS "bits/second" MAX-ACCESS read-create STATUS current DESCRIPTION "If retransmission is used in downstream direction, this parameter specifies the maximum net data rate for the bearer channel. The values range in steps of 1000 bit/s. " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.1.10" ::= { vdsl2ChConfProfileEntry 38 } vdsl2ChConfProfMaxNdrRtxUs OBJECT-TYPE SYNTAX Unsigned32(32000..200000000) UNITS "bits/second" MAX-ACCESS read-create STATUS current DESCRIPTION "If retransmission is used in upstream direction, this parameter specifies the maximum net data rate for the bearer channel.The values range in steps of 1000 bit/s. " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.1.10" ::= { vdsl2ChConfProfileEntry 39 } vdsl2ChConfProfMaxDelayRtxDs OBJECT-TYPE SYNTAX Unsigned32(1..63) UNITS "milliseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "If retransmission is used in downstream direction, this parameter specifies the maximum for the instantaneous delay due to the effect of retransmission only (see G.998.4 for detailed specification). The delay ranges from 1 to 63 ms by steps of 1 ms. Unit: milliseconds " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.11" ::= { vdsl2ChConfProfileEntry 40 } vdsl2ChConfProfMaxDelayRtxUs OBJECT-TYPE SYNTAX Unsigned32(1..63) UNITS "milliseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "If retransmission is used in upstream direction, this parameter specifies the maximum for the instantaneous delay due to the effect of retransmission only (see G.998.4 for detailed specification). The delay ranges from 1 to 63 ms by steps of 1 ms. Unit: milliseconds " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.11" ::= { vdsl2ChConfProfileEntry 41 } vdsl2ChConfProfMinDelayRtxDs OBJECT-TYPE SYNTAX Unsigned32(0..63) UNITS "milliseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "If retransmission is used in downstream direction, this parameter specifies the minimum for the instantaneous delay due to the effect of retransmission only (see G.998.4 for detailed specification). The delay ranges from 0 to 63 ms by steps of 1 ms. Unit: milliseconds " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.12" ::= { vdsl2ChConfProfileEntry 42 } vdsl2ChConfProfMinDelayRtxUs OBJECT-TYPE SYNTAX Unsigned32(0..63) UNITS "milliseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "If retransmission is used in upstream direction, this parameter specifies the minimum for the instantaneous delay due to the effect of retransmission only (see G.998.4 for detailed specification). The delay ranges from 0 to 63 ms by steps of 1 ms. Unit: milliseconds " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.12" ::= { vdsl2ChConfProfileEntry 43 } vdsl2ChConfProfMinInpShineRtxDs OBJECT-TYPE SYNTAX Unsigned32(0..63) UNITS "symbols" MAX-ACCESS read-create STATUS current DESCRIPTION "If retransmission is used in downstream direction, this parameter specifies the minimum impulse noise protection against SHINE for the bearer channel if it is transported over DMT symbols with a subcarrier spacing of 4.3125 kHz. The impulse noise protection is expressed in DMT symbols with a subcarrier spacing of 4.3125 kHz and can take any integer value from 0 to 63, inclusive. Unit: symbols " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.13" DEFVAL { 0 } ::= { vdsl2ChConfProfileEntry 44 } vdsl2ChConfProfMinInpShineRtxUs OBJECT-TYPE SYNTAX Unsigned32(0..63) UNITS "symbols" MAX-ACCESS read-create STATUS current DESCRIPTION "If retransmission is used in upstream direction, this parameter specifies the minimum impulse noise protection against SHINE for the bearer channel if it is transported over DMT symbols with a subcarrier spacing of 4.3125 kHz. The impulse noise protection is expressed in DMT symbols with a subcarrier spacing of 4.3125 kHz and can take any integer value from 0 to 63, inclusive. Unit: symbols " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.13" DEFVAL { 0 } ::= { vdsl2ChConfProfileEntry 45 } vdsl2ChConfProfMinInp8ShineRtxDs OBJECT-TYPE SYNTAX Unsigned32(0..127) UNITS "symbols" MAX-ACCESS read-create STATUS current DESCRIPTION "If retransmission is used in downstream direction, this parameter specifies the minimum impulse noise protection against SHINE for the bearer channel if it is transported over DMT symbols with a subcarrier spacing of 8.625 kHz. The impulse noise protection is expressed in DMT symbols with a subcarrier spacing of 8.625 kHz and can take any integer value from 0 to 127, inclusive. Unit: symbols " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.14" DEFVAL { 0 } ::= { vdsl2ChConfProfileEntry 46 } vdsl2ChConfProfMinInp8ShineRtxUs OBJECT-TYPE SYNTAX Unsigned32(0..127) UNITS "symbols" MAX-ACCESS read-create STATUS current DESCRIPTION "If retransmission is used in upstream direction, this parameter specifies the minimum impulse noise protection against SHINE for the bearer channel if it is transported over DMT symbols with a subcarrier spacing of 8.625 kHz. The impulse noise protection is expressed in DMT symbols with a subcarrier spacing of 8.625 kHz and can take any integer value from 0 to 127, inclusive. Unit: symbols " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.14" DEFVAL { 0 } ::= { vdsl2ChConfProfileEntry 47 } vdsl2ChConfProfShineRatioRtxDs OBJECT-TYPE SYNTAX Unsigned32(0..100) MAX-ACCESS read-create STATUS current DESCRIPTION "If retransmission is used in downstream direction, this parameter specifies the SHINE ratio (detailed definition see G.998.4). The values range from 0 to 0.100 in increments of 0.001. " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.15" DEFVAL { 0 } ::= { vdsl2ChConfProfileEntry 48 } vdsl2ChConfProfShineRatioRtxUs OBJECT-TYPE SYNTAX Unsigned32(0..100) MAX-ACCESS read-create STATUS current DESCRIPTION "If retransmission is used in upstream direction, this parameter specifies the SHINE ratio (detailed definition see G.998.4). The values range from 0 to 0.100 in increments of 0.001. " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.15" DEFVAL { 0 } ::= { vdsl2ChConfProfileEntry 49 } vdsl2ChConfProfMinInpReinRtxDs OBJECT-TYPE SYNTAX Unsigned32(0..7) MAX-ACCESS read-create STATUS current DESCRIPTION "If retransmission is used in downstream direction, this parameter specifies the minimum impulse noise protection against REIN for the bearer channel if it is transported over DMT symbols with a subcarrier spacing of 4.3125 kHz. The impulse noise protection is expressed in DMT symbols with a subcarrier spacing of 4.3125 kHz and can take any integer value from 0 to 7, inclusive. " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.16" DEFVAL { 0 } ::= { vdsl2ChConfProfileEntry 50 } vdsl2ChConfProfMinInpReinRtxUs OBJECT-TYPE SYNTAX Unsigned32(0..7) MAX-ACCESS read-create STATUS current DESCRIPTION "If retransmission is used in upstream direction, this parameter specifies the minimum impulse noise protection against REIN for the bearer channel if it is transported over DMT symbols with a subcarrier spacing of 4.3125 kHz. The impulse noise protection is expressed in DMT symbols with a subcarrier spacing of 4.3125 kHz and can take any integer value from 0 to 7, inclusive. " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.16" DEFVAL { 0 } ::= { vdsl2ChConfProfileEntry 51 } vdsl2ChConfProfMinInp8ReinRtxDs OBJECT-TYPE SYNTAX Unsigned32(0..13) MAX-ACCESS read-create STATUS current DESCRIPTION "If retransmission is used in downstream direction, this parameter specifies the minimum impulse noise protection against REIN for the bearer channel if it is transported over DMT symbols with a subcarrier spacing of 8.625 kHz. The impulse noise protection is expressed in DMT symbols with a subcarrier spacing of 8.625 kHz and can take any integer value from 0 to 13, inclusive. " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.17" DEFVAL { 0 } ::= { vdsl2ChConfProfileEntry 52 } vdsl2ChConfProfMinInp8ReinRtxUs OBJECT-TYPE SYNTAX Unsigned32(0..13) MAX-ACCESS read-create STATUS current DESCRIPTION "If retransmission is used in upstream direction, this parameter specifies the minimum impulse noise protection against REIN for the bearer channel if it is transported over DMT symbols with a subcarrier spacing of 8.625 kHz. The impulse noise protection is expressed in DMT symbols with a subcarrier spacing of 8.625 kHz and can take any integer value from 0 to 13, inclusive. " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.17" DEFVAL { 0 } ::= { vdsl2ChConfProfileEntry 53 } vdsl2ChConfProfIatReinRtxDs OBJECT-TYPE SYNTAX INTEGER { frequency100Hz(0), frequency120Hz(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "If retransmission is used in downstream direction, this parameter specifies the inter-arrival time that shall be assumed for REIN protection. Options: 1. frequency100Hz(0) - an inter-arrival time derived from a REIN at 100 Hz 2. frequency120Hz(1) - an inter-arrival time derived from a REIN at 120 Hz " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.18" DEFVAL { frequency100Hz } ::= { vdsl2ChConfProfileEntry 54 } vdsl2ChConfProfIatReinRtxUs OBJECT-TYPE SYNTAX INTEGER { frequency100Hz(0), frequency120Hz(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "If retransmission is used in upstream direction, this parameter specifies the inter-arrival time that shall be assumed for REIN protection. Options: 1. frequency100Hz(0) - an inter-arrival time derived from a REIN at 100 Hz 2. frequency120Hz(1) - an inter-arrival time derived from a REIN at 120 Hz " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.18" DEFVAL { frequency100Hz } ::= { vdsl2ChConfProfileEntry 55 } vdsl2ChConfProfInitPolicy OBJECT-TYPE SYNTAX INTEGER { policy0(1), policy1(2), policy2(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "This parameter indicates which policy shall be applied to determine the transceiver configuration parameters at initialization. The valid values for CIPOLICY are 0,1 and 2. Those policies are defined in the respective recommendations. Options: 1. policy0 (1) - Policy 0 according to the applicable standard 2. policy1 (2) - Policy 1 according to the applicable standard 3. policy2 (3) - Policy 2 according to the applicable standard " REFERENCE "ITU-T G.997.1 Amendment 1, paragraph #7.3.2.10 (CIPOLICY)" DEFVAL { policy0 } ::= { vdsl2ChConfProfileEntry 56 } -- vdsl2LineAlarmConfTemplateTable vdsl2LineAlarmConfTemplateTable OBJECT-TYPE SYNTAX SEQUENCE OF Vdsl2LineAlarmConfTemplateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table vdsl2LineAlarmConfTemplateTable contains VDSL2 line alarm configuration template. The index of this table is vdsl2LAlarmConfTempTemplateName. A default template with an index of 'DEFVAL' will always exist and its parameters will be set to vendor specific values, unless otherwise specified in this document. " ::= { vdsl2ProfileAlarmConf 1 } vdsl2LineAlarmConfTemplateEntry OBJECT-TYPE SYNTAX Vdsl2LineAlarmConfTemplateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table vdsl2LineAlarmConfTemplateTable contains VDSL2 line alarm configuration template. The index of this entry is vdsl2LAlarmConfTempTemplateName. A default template with an index of 'DEFVAL' will always exist and its parameters will be set to vendor specific values, unless otherwise specified in this document. " INDEX { IMPLIED vdsl2LAlarmConfTempTemplateName } ::= { vdsl2LineAlarmConfTemplateTable 1 } Vdsl2LineAlarmConfTemplateEntry ::= SEQUENCE { vdsl2LAlarmConfTempTemplateName OCTET STRING, vdsl2LAlarmConfTempLineProfile OCTET STRING, vdsl2LAlarmConfTempChan1ConfProfile OCTET STRING, vdsl2LAlarmConfTempChan2ConfProfile OCTET STRING, vdsl2LAlarmConfTempChan3ConfProfile OCTET STRING, vdsl2LAlarmConfTempChan4ConfProfile OCTET STRING, vdsl2LAlarmConfTempRowStatus RowStatus } vdsl2LAlarmConfTempTemplateName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object identifies a row in this table." ::= { vdsl2LineAlarmConfTemplateEntry 1 } vdsl2LAlarmConfTempLineProfile OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of this object identifies the row in the VDSL2 Line Thresholds Configuration Profile Table (vdsl2LineAlarmConfProfileTable) that applies to this VDSL2 line. " REFERENCE "DSL Forum TR-90, paragraph 5.4.1" DEFVAL { "DEFVAL" } ::= { vdsl2LineAlarmConfTemplateEntry 2 } vdsl2LAlarmConfTempChan1ConfProfile OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of this object identifies the row in the VDSL2 Channel Thresholds Configuration Profile Table (vdsl2ChAlarmConfProfileTable) that applies for VDSL2 bearer channel #1. The channel profile name specified here must match the name of an existing row in the vdsl2ChAlarmConfProfileTable table. " REFERENCE "DSL Forum TR-90, paragraph 5.4.1" DEFVAL { "DEFVAL" } ::= { vdsl2LineAlarmConfTemplateEntry 3 } vdsl2LAlarmConfTempChan2ConfProfile OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of this object identifies the row in the VDSL2 Channel Thresholds Configuration Profile Table (vdsl2ChAlarmConfProfileTable) that applies for VDSL2 bearer channel #2. The channel profile name specified here must match the name of an existing row in the vdsl2ChAlarmConfProfileTable table. If the channel is unused, then the object is set to a zero length string. " REFERENCE "DSL Forum TR-90, paragraph 5.4.1" ::= { vdsl2LineAlarmConfTemplateEntry 4 } vdsl2LAlarmConfTempChan3ConfProfile OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of this object identifies the row in the VDSL2 Channel Thresholds Configuration Profile Table (vdsl2ChAlarmConfProfileTable) that applies for VDSL2 bearer channel #3. The channel profile name specified here must match the name of an existing row in the vdsl2ChAlarmConfProfileTable table. This object may be set to a non-zero length string only if vdsl2LAlarmConfTempChan2ConfProfile contains a non-zero length string. " REFERENCE "DSL Forum TR-90, paragraph 5.4.1" ::= { vdsl2LineAlarmConfTemplateEntry 5 } vdsl2LAlarmConfTempChan4ConfProfile OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of this object identifies the row in the VDSL2 Channel Thresholds Configuration Profile Table (vdsl2ChAlarmConfProfileTable) that applies for VDSL2 bearer channel #4. The channel profile name specified here must match the name of an existing row in the vdsl2ChAlarmConfProfileTable table. This object may be set to a non-zero length string only if vdsl2LAlarmConfTempChan3ConfProfile contains a non-zero length string. " REFERENCE "DSL Forum TR-90, paragraph 5.4.1" ::= { vdsl2LineAlarmConfTemplateEntry 6 } vdsl2LAlarmConfTempRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. When 'active' is set, the system will validate the profile. Before a profile can be deleted or taken out of service (by setting this object to 'destroy' or 'outOfService'), it must be not referenced from all associated lines. " ::= { vdsl2LineAlarmConfTemplateEntry 7 } -- vdsl2LineAlarmConfProfileTable vdsl2LineAlarmConfProfileTable OBJECT-TYPE SYNTAX SEQUENCE OF Vdsl2LineAlarmConfProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table vdsl2LineAlarmConfProfileTable contains VDSL2 line PM thresholds profiles. The index of this table is vdsl2LineAlarmConfProfileName. A default profile with an index of 'DEFVAL' will always exist and its parameters will be set to vendor specific values, unless otherwise specified in this document. " ::= { vdsl2ProfileAlarmConf 2 } vdsl2LineAlarmConfProfileEntry OBJECT-TYPE SYNTAX Vdsl2LineAlarmConfProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table vdsl2LineAlarmConfProfileTable contains VDSL2 line PM thresholds profiles. The index of this entry is vdsl2LineAlarmConfProfileName. A default profile with an index of 'DEFVAL' will always exist and its parameters will be set to vendor specific values, unless otherwise specified in this document. " INDEX { IMPLIED vdsl2LineAlarmConfProfileName } ::= { vdsl2LineAlarmConfProfileTable 1 } Vdsl2LineAlarmConfProfileEntry ::= SEQUENCE { vdsl2LineAlarmConfProfileName OCTET STRING, vdsl2LineAlarmConfProfileXtucThresh15MinFecs HCPerfIntervalThreshold, vdsl2LineAlarmConfProfileXtucThresh15MinEs HCPerfIntervalThreshold, vdsl2LineAlarmConfProfileXtucThresh15MinSes HCPerfIntervalThreshold, vdsl2LineAlarmConfProfileXtucThresh15MinLoss HCPerfIntervalThreshold, vdsl2LineAlarmConfProfileXtucThresh15MinUas HCPerfIntervalThreshold, vdsl2LineAlarmConfProfileXturThresh15MinFecs HCPerfIntervalThreshold, vdsl2LineAlarmConfProfileXturThresh15MinEs HCPerfIntervalThreshold, vdsl2LineAlarmConfProfileXturThresh15MinSes HCPerfIntervalThreshold, vdsl2LineAlarmConfProfileXturThresh15MinLoss HCPerfIntervalThreshold, vdsl2LineAlarmConfProfileXturThresh15MinUas HCPerfIntervalThreshold, vdsl2LineAlarmConfProfileThresh15MinFailedFullInt Unsigned32, vdsl2LineAlarmConfProfileThresh15MinFailedShrtInt Unsigned32, vdsl2LineAlarmConfProfileRowStatus RowStatus, vdsl2LineAlarmConfProfileThresh15MinFullInt Unsigned32, vdsl2LineAlarmConfProfileXtucThresh15MinLeftrs HCPerfIntervalThreshold, vdsl2LineAlarmConfProfileXturThresh15MinLeftrs HCPerfIntervalThreshold, hwVdsl2LineAlarmConfProfileDyingGaspAlarmSwitch INTEGER, hwVdsl2LineAlarmConfProfileActiveFailAlarmSwitch INTEGER, hwVdsl2LineAlarmConfProfileRateChangeAlarmSwitch INTEGER, hwVdsl2LineAlarmConfProfileLegacyCpeAlarmSwitch INTEGER, hwVdsl2LineAlarmConfProfileVictAbnormalVariationAlarmSwitch INTEGER, hwVdsl2LineAlarmConfProfileDistAbnormalVariationAlarmSwitch INTEGER, hwVdsl2LineAlarmConfProfileReceivedESAbnormalAlarmSwitch INTEGER, hwVdsl2LineAlarmConfProfileNonVectoringCPEActivatedAlarmSwitch INTEGER, hwVdsl2LineAlarmConfProfileFreqRetrainReachThresholdAlarmSwitch INTEGER, hwvdsl2LineAlarmConfProfilePSConfigAbnormalAlarmSwitch INTEGER } vdsl2LineAlarmConfProfileName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object identifies a row in this table." ::= { vdsl2LineAlarmConfProfileEntry 1 } vdsl2LineAlarmConfProfileXtucThresh15MinFecs OBJECT-TYPE SYNTAX HCPerfIntervalThreshold UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "A threshold for the vdsl2PMLCurr15MFecs counter, when vdsl2PMLCurrUnit is XTUC {1}. The value 0 means that no threshold is specified for the associated counter. Unit: seconds " REFERENCE "ITU-T G.997.1, paragraph 7.3.1" DEFVAL { 0 } ::= { vdsl2LineAlarmConfProfileEntry 2 } vdsl2LineAlarmConfProfileXtucThresh15MinEs OBJECT-TYPE SYNTAX HCPerfIntervalThreshold UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "A threshold for the vdsl2PMLCurr15MEs counter, when vdsl2PMLCurrUnit is XTUC {1}. The value 0 means that no threshold is specified for the associated counter. Unit: seconds " REFERENCE "ITU-T G.997.1, paragraph 7.3.1" DEFVAL { 0 } ::= { vdsl2LineAlarmConfProfileEntry 3 } vdsl2LineAlarmConfProfileXtucThresh15MinSes OBJECT-TYPE SYNTAX HCPerfIntervalThreshold UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "A threshold for the vdsl2PMLCurr15MSes counter, when vdsl2PMLCurrUnit is XTUC {1}. The value 0 means that no threshold is specified for the associated counter. Unit: seconds " REFERENCE "ITU-T G.997.1, paragraph 7.3.1" DEFVAL { 0 } ::= { vdsl2LineAlarmConfProfileEntry 4 } vdsl2LineAlarmConfProfileXtucThresh15MinLoss OBJECT-TYPE SYNTAX HCPerfIntervalThreshold UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "A threshold for the vdsl2PMLCurr15MLoss counter, when vdsl2PMLCurrUnit is XTUC {1}. The value 0 means that no threshold is specified for the associated counter. Unit: seconds " REFERENCE "ITU-T G.997.1, paragraph 7.3.1" DEFVAL { 0 } ::= { vdsl2LineAlarmConfProfileEntry 5 } vdsl2LineAlarmConfProfileXtucThresh15MinUas OBJECT-TYPE SYNTAX HCPerfIntervalThreshold UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "A threshold for the vdsl2PMLCurr15MUas counter, when vdsl2PMLCurrUnit is XTUC {1}. The value 0 means that no threshold is specified for the associated counter. Unit: seconds " REFERENCE "ITU-T G.997.1, paragraph 7.3.1" DEFVAL { 0 } ::= { vdsl2LineAlarmConfProfileEntry 6 } vdsl2LineAlarmConfProfileXturThresh15MinFecs OBJECT-TYPE SYNTAX HCPerfIntervalThreshold UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "A threshold for the vdsl2PMLCurr15MFecs counter, when vdsl2PMLCurrUnit is XTUR {2}. The value 0 means that no threshold is specified for the associated counter. Unit: seconds " REFERENCE "ITU-T G.997.1, paragraph 7.3.1" DEFVAL { 0 } ::= { vdsl2LineAlarmConfProfileEntry 7 } vdsl2LineAlarmConfProfileXturThresh15MinEs OBJECT-TYPE SYNTAX HCPerfIntervalThreshold UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "A threshold for the vdsl2PMLCurr15MEs counter, when vdsl2PMLCurrUnit is XTUR {2}. The value 0 means that no threshold is specified for the associated counter. Unit: seconds " REFERENCE "ITU-T G.997.1, paragraph 7.3.1" DEFVAL { 0 } ::= { vdsl2LineAlarmConfProfileEntry 8 } vdsl2LineAlarmConfProfileXturThresh15MinSes OBJECT-TYPE SYNTAX HCPerfIntervalThreshold UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "A threshold for the vdsl2PMLCurr15MSes counter, when vdsl2PMLCurrUnit is XTUR {2}. The value 0 means that no threshold is specified for the associated counter. Unit: seconds " REFERENCE "ITU-T G.997.1, paragraph 7.3.1" DEFVAL { 0 } ::= { vdsl2LineAlarmConfProfileEntry 9 } vdsl2LineAlarmConfProfileXturThresh15MinLoss OBJECT-TYPE SYNTAX HCPerfIntervalThreshold UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "A threshold for the vdsl2PMLCurr15MLoss counter, when vdsl2PMLCurrUnit is XTUR {2}. The value 0 means that no threshold is specified for the associated counter. Unit: seconds " REFERENCE "ITU-T G.997.1, paragraph 7.3.1" DEFVAL { 0 } ::= { vdsl2LineAlarmConfProfileEntry 10 } vdsl2LineAlarmConfProfileXturThresh15MinUas OBJECT-TYPE SYNTAX HCPerfIntervalThreshold UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "A threshold for the vdsl2PMLCurr15MUas counter, when vdsl2PMLCurrUnit is XTUR {2}. The value 0 means that no threshold is specified for the associated counter. Unit: seconds " REFERENCE "ITU-T G.997.1, paragraph 7.3.1" DEFVAL { 0 } ::= { vdsl2LineAlarmConfProfileEntry 11 } vdsl2LineAlarmConfProfileThresh15MinFailedFullInt OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "A threshold for the vdsl2PMLCurrInit15MfailedFullInits counter. The value 0 means that no threshold is specified for the associated counter. " REFERENCE "ITU-T G.997.1, paragraph 7.3.1" DEFVAL { 0 } ::= { vdsl2LineAlarmConfProfileEntry 12 } vdsl2LineAlarmConfProfileThresh15MinFailedShrtInt OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "A threshold for the vdsl2PMLCurrInit15MFailedShortInits counter. The value 0 means that no threshold is specified for the associated counter. " REFERENCE "ITU-T G.997.1, paragraph 7.3.1" DEFVAL { 0 } ::= { vdsl2LineAlarmConfProfileEntry 13 } vdsl2LineAlarmConfProfileRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. When 'active' is set, the system will validate the profile. Before a profile can be deleted or taken out of service (by setting this object to 'destroy' or 'outOfService'), it must be not referenced from all associated templates. " ::= { vdsl2LineAlarmConfProfileEntry 14 } vdsl2LineAlarmConfProfileThresh15MinFullInt OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "A threshold for the vdsl2PMLCurrInit15MFullInits counter. The value 0 means that no threshold is specified for the associated counter. " REFERENCE "ITU-T G.997.1, paragraph 7.3.1" DEFVAL { 0 } ::= { vdsl2LineAlarmConfProfileEntry 15 } vdsl2LineAlarmConfProfileXtucThresh15MinLeftrs OBJECT-TYPE SYNTAX HCPerfIntervalThreshold UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "A threshold for the vdsl2PMLCurr15MLeftrs counter, when vdsl2PMLCurrUnit is XTUC {1}. The value 0 means that no threshold is specified for the associated counter. Unit: seconds " REFERENCE "ITU-T G.997.1, paragraph 7.3.1" DEFVAL { 0 } ::= { vdsl2LineAlarmConfProfileEntry 16 } vdsl2LineAlarmConfProfileXturThresh15MinLeftrs OBJECT-TYPE SYNTAX HCPerfIntervalThreshold UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "A threshold for the vdsl2PMLCurr15MLeftrs counter, when vdsl2PMLCurrUnit is XTUR {2}. The value 0 means that no threshold is specified for the associated counter. Unit: seconds " REFERENCE "ITU-T G.997.1, paragraph 7.3.1" DEFVAL { 0 } ::= { vdsl2LineAlarmConfProfileEntry 17 } hwVdsl2LineAlarmConfProfileDyingGaspAlarmSwitch OBJECT-TYPE SYNTAX INTEGER { enable (1), disable (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object enable/disable the report of LOSS-OF-POWER alarm in a VDSL line. Options: 1. enable(1) - The report of LOSS-OF-POWER alarm in a VDSL line is enabled 2. disable(2) - The report of LOSS-OF-POWER alarm in a VDSL line is disabled " DEFVAL { enable } ::= { vdsl2LineAlarmConfProfileEntry 18 } hwVdsl2LineAlarmConfProfileActiveFailAlarmSwitch OBJECT-TYPE SYNTAX INTEGER { enable (1), disable (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object enable/disable the active fail alarm switch. Options: 1. enable(1) - The active fail alarm switch is enabled 2. disable(2) - The active fail alarm switch is disabled " DEFVAL { enable } ::= { vdsl2LineAlarmConfProfileEntry 19 } hwVdsl2LineAlarmConfProfileRateChangeAlarmSwitch OBJECT-TYPE SYNTAX INTEGER { enable (1), disable (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object enable/disable the active rate change alarm switch. Options: 1. enable(1) - The active rate change alarm switch is enabled 2. disable(2) - The active rate change alarm switch is disabled " DEFVAL { enable } ::= { vdsl2LineAlarmConfProfileEntry 20 } hwVdsl2LineAlarmConfProfileLegacyCpeAlarmSwitch OBJECT-TYPE SYNTAX INTEGER { enable (1), disable (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object enable/disable the legacy cpe alarm switch. Options: 1. enable(1) - The legacy cpe alarm switch is enabled 2. disable(2) - The legacy cpe alarm switch is disabled " DEFVAL { enable } ::= { vdsl2LineAlarmConfProfileEntry 21 } hwVdsl2LineAlarmConfProfileVictAbnormalVariationAlarmSwitch OBJECT-TYPE SYNTAX INTEGER { enable (1), disable (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object enable/disable alarm switch that the port receives abnormal crosstalk. Options: 1. enable(1) - The alarm switch that the port receives abnormal crosstalk is enabled 2. disable(2) - The alarm switch that the port receives abnormal crosstalk is disabled " DEFVAL { enable } ::= { vdsl2LineAlarmConfProfileEntry 22 } hwVdsl2LineAlarmConfProfileDistAbnormalVariationAlarmSwitch OBJECT-TYPE SYNTAX INTEGER { enable (1), disable (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object enable/disable the alarm switch that the port causes abnormal crosstalk. Options: 1. enable(1) - The alarm switch that the port causes abnormal crosstalk is enabled 2. disable(2) - The alarm switch that the port causes abnormal crosstalk is disabled " DEFVAL { enable } ::= { vdsl2LineAlarmConfProfileEntry 23 } hwVdsl2LineAlarmConfProfileReceivedESAbnormalAlarmSwitch OBJECT-TYPE SYNTAX INTEGER { enable (1), disable (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object enable/disable the alarm switch that The port receives abnormal error sample messages. Options: 1. enable(1) - The alarm switch that the port receives abnormal error sample messages is enabled 2. disable(2) - The alarm switch that the port receives abnormal error sample messages is disabled " DEFVAL { enable } ::= { vdsl2LineAlarmConfProfileEntry 24 } hwVdsl2LineAlarmConfProfileNonVectoringCPEActivatedAlarmSwitch OBJECT-TYPE SYNTAX INTEGER { enable (1), disable (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object enable/disable the alarm switch that the port is activated in none-vectoring mode. Options: 1. enable(1) - The alarm switch that the port is activated in none-vectoring mode is enabled 2. disable(2) - The alarm switch that the port is activated in none-vectoring mode is disabled " DEFVAL { enable } ::= { vdsl2LineAlarmConfProfileEntry 25 } hwVdsl2LineAlarmConfProfileFreqRetrainReachThresholdAlarmSwitch OBJECT-TYPE SYNTAX INTEGER { enable (1), disable (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object enable/disable the alarm switch that the port frequently retrain times in 15 minutes reach the threshold. Options: 1. enable(1) - The alarm switch that the port frequently retrain times in 15 minutes reach the threshold is enabled 2. disable(2) - The alarm switch that the port frequently retrain times in 15 minutes reach the threshold is disabled " DEFVAL { enable } ::= { vdsl2LineAlarmConfProfileEntry 26 } hwvdsl2LineAlarmConfProfilePSConfigAbnormalAlarmSwitch OBJECT-TYPE SYNTAX INTEGER { enable (1), disable (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object enable/disable the pilot sequence configuration abnormal alarm switch. Options: 1. enable(1) - The pilot sequence configuration abnormal alarm switch is enabled 2. disable(2) - The pilot sequence configuration abnormal alarm switch is disabled " DEFVAL { enable } ::= { vdsl2LineAlarmConfProfileEntry 27 } -- vdsl2ChAlarmConfProfileTable vdsl2ChAlarmConfProfileTable OBJECT-TYPE SYNTAX SEQUENCE OF Vdsl2ChAlarmConfProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table vdsl2ChAlarmConfProfileTable contains VDSL2 channel PM thresholds profiles. The index of this table is vdsl2ChAlarmConfProfileName. A default profile with an index of 'DEFVAL' will always exist and its parameters will be set to vendor-specific values, unless otherwise specified in this document. " ::= { vdsl2ProfileAlarmConf 3 } vdsl2ChAlarmConfProfileEntry OBJECT-TYPE SYNTAX Vdsl2ChAlarmConfProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table vdsl2ChAlarmConfProfileTable contains VDSL2 channel PM thresholds profiles. The index of this entry is vdsl2ChAlarmConfProfileName. A default profile with an index of 'DEFVAL' will always exist and its parameters will be set to vendor-specific values, unless otherwise specified in this document. " INDEX { IMPLIED vdsl2ChAlarmConfProfileName } ::= { vdsl2ChAlarmConfProfileTable 1 } Vdsl2ChAlarmConfProfileEntry ::= SEQUENCE { vdsl2ChAlarmConfProfileName OCTET STRING, vdsl2ChAlarmConfProfileXtucThresh15MinCodingViolations Unsigned32, vdsl2ChAlarmConfProfileXtucThresh15MinCorrected Unsigned32, vdsl2ChAlarmConfProfileXturThresh15MinCodingViolations Unsigned32, vdsl2ChAlarmConfProfileXturThresh15MinCorrected Unsigned32, vdsl2ChAlarmConfProfileMonitoringRateDs Unsigned32, vdsl2ChAlarmConfProfileMonitoringRateUs Unsigned32, vdsl2ChAlarmConfProfileRowStatus RowStatus } vdsl2ChAlarmConfProfileName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object identifies a row in this table." ::= { vdsl2ChAlarmConfProfileEntry 1 } vdsl2ChAlarmConfProfileXtucThresh15MinCodingViolations OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "A threshold for the vdsl2PMChCurr15MCodingViolations counter, when vdsl2PMChCurrUnit is XTUC {1}. The value 0 means that no threshold is specified for the associated counter. " REFERENCE "ITU-T G.997.1, paragraph 7.3.2" DEFVAL { 0 } ::= { vdsl2ChAlarmConfProfileEntry 2 } vdsl2ChAlarmConfProfileXtucThresh15MinCorrected OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "A threshold for the vdsl2PMChCurr15MCorrectedBlocks counter, when vdsl2PMChCurrUnit is XTUC {1}. The value 0 means that no threshold is specified for the associated counter. " REFERENCE "ITU-T G.997.1, paragraph 7.3.2" DEFVAL { 0 } ::= { vdsl2ChAlarmConfProfileEntry 3 } vdsl2ChAlarmConfProfileXturThresh15MinCodingViolations OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "A threshold for the vdsl2PMChCurr15MCodingViolations counter, when vdsl2PMChCurrUnit is XTUR {2}. The value 0 means that no threshold is specified for the associated counter. " REFERENCE "ITU-T G.997.1, paragraph 7.3.2" DEFVAL { 0 } ::= { vdsl2ChAlarmConfProfileEntry 4 } vdsl2ChAlarmConfProfileXturThresh15MinCorrected OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "A threshold for the vdsl2PMChCurr15MCorrectedBlocks counter, when vdsl2PMChCurrUnit is XTUR {2}. The value 0 means that no threshold is specified for the associated counter. " REFERENCE "ITU-T G.997.1, paragraph 7.3.2" DEFVAL { 0 } ::= { vdsl2ChAlarmConfProfileEntry 5 } vdsl2ChAlarmConfProfileMonitoringRateDs OBJECT-TYPE SYNTAX Unsigned32(0..200000000) UNITS "bits/second" MAX-ACCESS read-create STATUS current DESCRIPTION "The channel monitoring rate downstream. Huawei defined. When the value you set is larger than the value of the rate downstream defined in the channel profile, it will not be successful. The value 0 means that no threshold is specified for the associated counter. Unit: bits/second " DEFVAL { 0 } ::= { vdsl2ChAlarmConfProfileEntry 6 } vdsl2ChAlarmConfProfileMonitoringRateUs OBJECT-TYPE SYNTAX Unsigned32(0..200000000) UNITS "bits/second" MAX-ACCESS read-create STATUS current DESCRIPTION "The channel monitoring rate upstream. Huawei defined. When the value you set is larger than the value of the rate upstream defined in the channel profile, it will not be successful. The value 0 means that no threshold is specified for the associated counter. Unit: bits/second " DEFVAL { 0 } ::= { vdsl2ChAlarmConfProfileEntry 7 } vdsl2ChAlarmConfProfileRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. When 'active' is set, the system will validate the profile. Before a profile can be deleted or taken out of service (by setting this object to 'destroy' or 'outOfService'), it must be not referenced from all associated templates. " ::= { vdsl2ChAlarmConfProfileEntry 8 } -- PM line current counters vdsl2PMLineCurrTable OBJECT-TYPE SYNTAX SEQUENCE OF Vdsl2PMLineCurrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table vdsl2PMLineCurrTable contains current Performance Monitoring results of VDSL2 line. The indexes of this table are an interface index where the interface has an ifType of vdsl2(251) and the termination unit. " ::= { vdsl2PMLine 1 } vdsl2PMLineCurrEntry OBJECT-TYPE SYNTAX Vdsl2PMLineCurrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table vdsl2PMLineCurrTable contains current Performance Monitoring results of VDSL2 line. The indexes of this entry are an interface index where the interface has an ifType of vdsl2(251) and the termination unit. " INDEX { ifIndex, vdsl2PMLCurrUnit } ::= { vdsl2PMLineCurrTable 1 } Vdsl2PMLineCurrEntry ::= SEQUENCE { vdsl2PMLCurrUnit Vdsl2Unit, vdsl2PMLCurrValidIntervals Unsigned32, vdsl2PMLCurrInvalidIntervals Unsigned32, vdsl2PMLCurr15MTimeElapsed HCPerfTimeElapsed, vdsl2PMLCurr15MFecs Counter32, vdsl2PMLCurr15MEs Counter32, vdsl2PMLCurr15MSes Counter32, vdsl2PMLCurr15MLoss Counter32, vdsl2PMLCurr15MUas Counter32, vdsl2PMLCurr1DayValidIntervals Unsigned32, vdsl2PMLCurr1DayInvalidIntervals Unsigned32, vdsl2PMLCurr1DayTimeElapsed HCPerfTimeElapsed, vdsl2PMLCurr1DayFecs Counter32, vdsl2PMLCurr1DayEs Counter32, vdsl2PMLCurr1DaySes Counter32, vdsl2PMLCurr1DayLoss Counter32, vdsl2PMLCurr1DayUas Counter32, vdsl2PMLEverBeforeFecs Counter32, vdsl2PMLEverBeforeEs Counter32, vdsl2PMLEverBeforeSes Counter32, vdsl2PMLEverBeforeLoss Counter32, vdsl2PMLEverBeforeUas Counter32, vdsl2PMLCurr15MLofs Counter32, vdsl2PMLCurr15MLols Counter32, vdsl2PMLCurr15MLops Counter32, vdsl2PMLCurr1DayLofs Counter32, vdsl2PMLCurr1DayLols Counter32, vdsl2PMLCurr1DayLops Counter32, vdsl2PMLEverBeforeLofs Counter32, vdsl2PMLEverBeforeLols Counter32, vdsl2PMLEverBeforeLops Counter32, vdsl2PMLCurr15MSosSuccess Counter32, vdsl2PMLCurr1DaySosSuccess Counter32, vdsl2PMLEverBeforeSosSuccess Counter32, vdsl2PMLCurr15MInmainpeq OCTET STRING, vdsl2PMLCurr15MInmame Counter32, vdsl2PMLCurr15MInmaiat OCTET STRING, vdsl2PMLCurr1DayInmainpeq OCTET STRING, vdsl2PMLCurr1DayInmame Counter32, vdsl2PMLCurr1DayInmaiat OCTET STRING, vdsl2PMLEverBeforeInmainpeq OCTET STRING, vdsl2PMLEverBeforeInmame Counter32, vdsl2PMLEverBeforeInmaiat OCTET STRING, vdsl2PMLineCurr15MStartTime DateAndTime, vdsl2PMLineCurr1DayStartTime DateAndTime, vdsl2PMLCurr15MLeftrs Counter32, vdsl2PMLCurr15MEfb Counter32, vdsl2PMLCurr15MMinEftr Counter32, vdsl2PMLCurr1DayLeftrs Counter32, vdsl2PMLCurr1DayEfb Counter32, vdsl2PMLCurr1DayMinEftr Counter32, vdsl2PMLEverBeforeLeftrs Counter32, vdsl2PMLEverBeforeEfb Counter32, vdsl2PMLEverBeforeMinEftr Counter32, hwvdsl2PMLEverBeforeSraDownShiftEvent Counter32, hwvdsl2PMLEverBeforeSraUpShiftEvent Counter32, hwvdsl2PMLCurr15MSraDownShiftEvent Counter32, hwvdsl2PMLCurr15MSraUpShiftEvent Counter32, hwvdsl2PMLCurr1DaySraDownShiftEvent Counter32, hwvdsl2PMLCurr1DaySraUpShiftEvent Counter32, hwvdsl2PMLEverBeforeDisorderLeavingEvent Counter32, hwvdsl2PMLEverBeforeLof Counter32, hwvdsl2PMLEverBeforeLos Counter32, hwvdsl2PMLEverBeforeLop Counter32, hwvdsl2PMLEverBeforeLom Counter32, hwvdsl2PMLCurr15MDisorderLeavingEvent Counter32, hwvdsl2PMLCurr1DayDisorderLeavingEvent Counter32, hwvdsl2PMLCurr15MLof Counter32, hwvdsl2PMLCurr15MLos Counter32, hwvdsl2PMLCurr15MLop Counter32, hwvdsl2PMLCurr15MLom Counter32, hwvdsl2PMLCurr1DayLof Counter32, hwvdsl2PMLCurr1DayLos Counter32, hwvdsl2PMLCurr1DayLop Counter32, hwvdsl2PMLCurr1DayLom Counter32 } vdsl2PMLCurrUnit OBJECT-TYPE SYNTAX Vdsl2Unit MAX-ACCESS not-accessible STATUS current DESCRIPTION "The termination unit XTUC{1} or XTUR{2}." ::= { vdsl2PMLineCurrEntry 1 } vdsl2PMLCurrValidIntervals OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid intervals." ::= { vdsl2PMLineCurrEntry 2 } vdsl2PMLCurrInvalidIntervals OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Invalid intervals." ::= { vdsl2PMLineCurrEntry 3 } vdsl2PMLCurr15MTimeElapsed OBJECT-TYPE SYNTAX HCPerfTimeElapsed UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Total elapsed seconds in this interval. Unit: seconds " ::= { vdsl2PMLineCurrEntry 4 } vdsl2PMLCurr15MFecs OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds during this interval that there was at least one FEC correction event for one or more bearer channels in this line. This parameter is inhibited during UAS or SES. Unit: seconds " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { vdsl2PMLineCurrEntry 5 } vdsl2PMLCurr15MEs OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds during this interval that there was: xTU-C: CRC-8 >= 1 for one or more bearer channels OR LOS >= 1 OR SEF >=1 OR LPR >= 1 xTU-R: FEBE >= 1 for one or more bearer channels OR LOS-FE >=1 OR RDI >=1 OR LPR-FE >=1 . This parameter is inhibited during UAS. Unit: seconds " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { vdsl2PMLineCurrEntry 6 } vdsl2PMLCurr15MSes OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds during this interval that there was: xTU-C: If G.998.4 is supported and retransmission is enabled in the near-end received direction, a SES is declared if during a 1-second interval, there is one or more severe loss of error-free throughput (seftr) defect in the near-end received direction. Or else, an SES is declared if, during a 1 second interval, there are 18 or more CRC 8 anomalies in one or more of the received bearer channels, or one or more LOS defects, or one or more SEF defects, or one or more LPR defects. xTU-R: If G.998.4 is supported and retransmission is enabled in the far-end received direction, a SES-LFE is declared if during a 1-second interval, there is one or more severe loss of error-free throughput (seftr) defect in the far-end received direction. Or else, an SES is declared if, during a 1 second interval, there are 18 or more FEBE anomalies in one or more of the transmitted bearer channels, or one or more far end LOS defects, or one or more RDI defects, or one or more LPR FE defects. This parameter is inhibited during UAS. Unit: seconds " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { vdsl2PMLineCurrEntry 7 } vdsl2PMLCurr15MLoss OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds during this interval that there was LOS (or LOS-FE for xTU-R). Unit: seconds " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { vdsl2PMLineCurrEntry 8 } vdsl2PMLCurr15MUas OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds in Unavailability State during this interval. Unavailability begins at the onset of 10 contiguous severely-errored seconds, and ends at the onset of 10 contiguous seconds with no severely-errored seconds. Unit: seconds " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { vdsl2PMLineCurrEntry 9 } vdsl2PMLCurr1DayValidIntervals OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid intervals." ::= { vdsl2PMLineCurrEntry 10 } vdsl2PMLCurr1DayInvalidIntervals OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Invalid intervals." ::= { vdsl2PMLineCurrEntry 11 } vdsl2PMLCurr1DayTimeElapsed OBJECT-TYPE SYNTAX HCPerfTimeElapsed UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Total elapsed seconds in this interval. Unit: seconds " ::= { vdsl2PMLineCurrEntry 12 } vdsl2PMLCurr1DayFecs OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds during this interval that there was at least one FEC correction event for one or more bearer channels in this line. This parameter is inhibited during UAS or SES. Unit: seconds " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { vdsl2PMLineCurrEntry 13 } vdsl2PMLCurr1DayEs OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds during this interval that there was: xTU-C: CRC-8 >= 1 for one or more bearer channels OR LOS >= 1 OR SEF >= 1 OR LPR >= 1 xTU-R: FEBE >= 1 for one or more bearer channels OR LOS-FE >= 1 OR RDI >= 1 OR LPR-FE >= 1. This parameter is inhibited during UAS. Unit: seconds " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { vdsl2PMLineCurrEntry 14 } vdsl2PMLCurr1DaySes OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds during this interval that there was: xTU-C: (CRC-8 summed over all bearer channels) >= 18 OR LOS >= 1 OR SEF >= 1 OR LPR >= 1 xTU-R: (FEBE summed over all bearer channels) >= 18 OR LOS-FE >= 1 OR RDI >= 1 OR LPR-FE >= 1 This parameter is inhibited during UAS. Unit: seconds " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { vdsl2PMLineCurrEntry 15 } vdsl2PMLCurr1DayLoss OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds during this interval that there was LOS (or LOS-FE for xTU-R). Unit: seconds " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { vdsl2PMLineCurrEntry 16 } vdsl2PMLCurr1DayUas OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds in Unavailability State during this interval. Unavailability begins at the onset of 10 contiguous severely -errored seconds, and ends at the onset of 10 contiguous seconds with no severely-errored seconds. Unit: seconds " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { vdsl2PMLineCurrEntry 17 } vdsl2PMLEverBeforeFecs OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds since agent reset that there was at least one FEC correction event for one or more bearer channels in this line. This parameter is inhibited during UAS or SES. Huawei defined. Unit: seconds " ::= { vdsl2PMLineCurrEntry 18 } vdsl2PMLEverBeforeEs OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds since agent reset that there was: xTU-C: CRC-8 >= 1 for one or more bearer channels OR LOS >= 1 OR SEF >= 1 OR LPR >= 1 xTU-R: FEBE >= 1 for one or more bearer channels OR LOS-FE >= 1 OR RDI >= 1 OR LPR-FE >= 1. This parameter is inhibited during UAS. Huawei defined. Unit: seconds " ::= { vdsl2PMLineCurrEntry 19 } vdsl2PMLEverBeforeSes OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds since agent reset that there was: xTU-C: (CRC-8 summed over all bearer channels) >= 18 OR LOS >= 1 OR SEF >= 1 OR LPR >= 1 xTU-R: (FEBE summed over all bearer channels) >= 18 OR LOS-FE >= 1 OR RDI >= 1 OR LPR-FE >= 1 This parameter is inhibited during UAS. Huawei defined. Unit: seconds " ::= { vdsl2PMLineCurrEntry 20 } vdsl2PMLEverBeforeLoss OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds since agent reset that there was LOS (or LOS-FE for xTU-R). Huawei defined. Unit: seconds " ::= { vdsl2PMLineCurrEntry 21 } vdsl2PMLEverBeforeUas OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds in Unavailability State since agent reset. Unavailability begins at the onset of 10 contiguous severely -errored seconds, and ends at the onset of 10 contiguous seconds with no severely-errored seconds. Huawei defined. Unit: seconds " ::= { vdsl2PMLineCurrEntry 22 } vdsl2PMLCurr15MLofs OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds in the current 15 minute interval when there was Loss of Framing. Unit: seconds " ::= { vdsl2PMLineCurrEntry 23 } vdsl2PMLCurr15MLols OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds in the current 15 minute interval when there was Loss of Link. Unit: seconds " ::= { vdsl2PMLineCurrEntry 24 } vdsl2PMLCurr15MLops OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds in the current 15 minute interval when there was Loss of Power. Unit: seconds " ::= { vdsl2PMLineCurrEntry 25 } vdsl2PMLCurr1DayLofs OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the number of seconds when there was Loss of Framing during the current day. Unit: seconds " ::= { vdsl2PMLineCurrEntry 26 } vdsl2PMLCurr1DayLols OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the number of seconds when there was Loss of Link during the current day. Unit: seconds " ::= { vdsl2PMLineCurrEntry 27 } vdsl2PMLCurr1DayLops OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the number of seconds when there was Loss of Power during the current day. Unit: seconds " ::= { vdsl2PMLineCurrEntry 28 } vdsl2PMLEverBeforeLofs OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the number of seconds when there was Loss of Framing since agent reset. Unit: seconds " ::= { vdsl2PMLineCurrEntry 29 } vdsl2PMLEverBeforeLols OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the number of seconds when there was Loss of Link since agent reset. Unit: seconds " ::= { vdsl2PMLineCurrEntry 30 } vdsl2PMLEverBeforeLops OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the number of seconds when there was Loss of Power since agent reset. Unit: seconds " ::= { vdsl2PMLineCurrEntry 31 } vdsl2PMLCurr15MSosSuccess OBJECT-TYPE SYNTAX Counter32 UNITS "times" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the total number of successful SOS procedures initiated in the current 15 minute. Unit: times " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { vdsl2PMLineCurrEntry 32 } vdsl2PMLCurr1DaySosSuccess OBJECT-TYPE SYNTAX Counter32 UNITS "times" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the total number of successful SOS procedures initiated during the current day. Unit: times " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { vdsl2PMLineCurrEntry 33 } vdsl2PMLEverBeforeSosSuccess OBJECT-TYPE SYNTAX Counter32 UNITS "times" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the total number of successful SOS procedures initiated since agent reset. Unit: times " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { vdsl2PMLineCurrEntry 34 } vdsl2PMLCurr15MInmainpeq OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..68)) MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is a count of the INMAINPEQi anomalies occurring on the line during current 15 minutes. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { vdsl2PMLineCurrEntry 35 } vdsl2PMLCurr15MInmame OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is a count of the INMAME anomalies occurring on the line during current 15 minutes. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { vdsl2PMLineCurrEntry 36 } vdsl2PMLCurr15MInmaiat OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is a count of the INMAIATi anomalies occurring on the line during current 15 minutes. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { vdsl2PMLineCurrEntry 37 } vdsl2PMLCurr1DayInmainpeq OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..68)) MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is a count of the INMAINPEQi anomalies occurring on the line during current 1 day. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { vdsl2PMLineCurrEntry 38 } vdsl2PMLCurr1DayInmame OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is a count of the INMAME anomalies occurring on the line during current 1 day. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { vdsl2PMLineCurrEntry 39 } vdsl2PMLCurr1DayInmaiat OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is a count of the INMAIATi anomalies occurring on the line during current 1 day. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { vdsl2PMLineCurrEntry 40 } vdsl2PMLEverBeforeInmainpeq OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..68)) MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is a count of the INMAINPEQi anomalies occurring on the line ever before. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { vdsl2PMLineCurrEntry 41 } vdsl2PMLEverBeforeInmame OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is a count of the INMAME anomalies occurring on the line ever before. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { vdsl2PMLineCurrEntry 42 } vdsl2PMLEverBeforeInmaiat OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is a count of the INMAIATi anomalies occurring on the line ever before. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { vdsl2PMLineCurrEntry 43 } vdsl2PMLineCurr15MStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Start time of the current 15-minute performance statistics." ::= { vdsl2PMLineCurrEntry 44 } vdsl2PMLineCurr1DayStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Start time of the current 1-day performance statistics." ::= { vdsl2PMLineCurrEntry 45 } vdsl2PMLCurr15MLeftrs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "If retransmission is used in a given transmit direction, this parameter is a count of the seconds with a near-end leftr defect present observed over the 15 minutes accumulation period. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1.1.6 7.2.1.2.6" ::= { vdsl2PMLineCurrEntry 46 } vdsl2PMLCurr15MEfb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "If retransmission is used in a given transmit direction, this parameter is a count of the number of error-free bits observed over the 15 minutes accumulation period. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1.1.7 7.2.1.2.7" ::= { vdsl2PMLineCurrEntry 47 } vdsl2PMLCurr15MMinEftr OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "If retransmission is used in a given transmit direction, this parameter reports the minimum of the EFTR(Error-free throughput rate) observed over the 15 minutes accumulation period. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1.1.8 7.2.1.2.8" ::= { vdsl2PMLineCurrEntry 48 } vdsl2PMLCurr1DayLeftrs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "If retransmission is used in a given transmit direction, this parameter is a count of the seconds with a near-end leftr defect present observed over the 24 hours accumulation period. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1.1.6 7.2.1.2.6" ::= { vdsl2PMLineCurrEntry 49 } vdsl2PMLCurr1DayEfb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "If retransmission is used in a given transmit direction, this parameter is a count of the number of error-free bits observed over the 24 hours accumulation period. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1.1.7 7.2.1.2.7" ::= { vdsl2PMLineCurrEntry 50 } vdsl2PMLCurr1DayMinEftr OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "If retransmission is used in a given transmit direction, this parameter reports the minimum of the EFTR(Error-free throughput rate) observed over the 24 hours accumulation period. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1.1.8 7.2.1.2.8" ::= { vdsl2PMLineCurrEntry 51} vdsl2PMLEverBeforeLeftrs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "If retransmission is used in a given transmit direction, this parameter is a count of the seconds with a near-end leftr defect present observed ever before. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1.1.6 7.2.1.2.6" ::= { vdsl2PMLineCurrEntry 52 } vdsl2PMLEverBeforeEfb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "If retransmission is used in a given transmit direction, this parameter is a count of the number of error-free bits observed ever before. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1.1.7 7.2.1.2.7" ::= { vdsl2PMLineCurrEntry 53 } vdsl2PMLEverBeforeMinEftr OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "If retransmission is used in a given transmit direction, this parameter reports the minimum of the EFTR(Error-free throughput rate) observed ever before. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1.1.8 7.2.1.2.8" ::= { vdsl2PMLineCurrEntry 54 } hwvdsl2PMLEverBeforeSraDownShiftEvent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is a count of sra downshift event occurring on the line ever before." ::= { vdsl2PMLineCurrEntry 55 } hwvdsl2PMLEverBeforeSraUpShiftEvent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is a count of sra upshift event occurring on the line ever before." ::= { vdsl2PMLineCurrEntry 56 } hwvdsl2PMLCurr15MSraDownShiftEvent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is a count of sra downshift event occurring on the line over the 15 minutes accumulation period." ::= { vdsl2PMLineCurrEntry 57 } hwvdsl2PMLCurr15MSraUpShiftEvent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is a count of sra upshift event occurring on the line over the 15 minutes accumulation period." ::= { vdsl2PMLineCurrEntry 58 } hwvdsl2PMLCurr1DaySraDownShiftEvent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is a count of sra downshift event occurring on the line during current 1 day." ::= { vdsl2PMLineCurrEntry 59 } hwvdsl2PMLCurr1DaySraUpShiftEvent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is a count of sra upshift event occurring on the line during current 1 day." ::= { vdsl2PMLineCurrEntry 60 } hwvdsl2PMLEverBeforeDisorderLeavingEvent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is a count of disorder leaving event occurring on the line ever before." ::= { vdsl2PMLineCurrEntry 61 } hwvdsl2PMLEverBeforeLof OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is a count of loss of frame failure occurring on the line ever before." ::= { vdsl2PMLineCurrEntry 62 } hwvdsl2PMLEverBeforeLos OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is a count of loss of signal failure occurring on the line ever before." ::= { vdsl2PMLineCurrEntry 63 } hwvdsl2PMLEverBeforeLop OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is a count of loss of power failure occurring on the line ever before." ::= { vdsl2PMLineCurrEntry 64 } hwvdsl2PMLEverBeforeLom OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is a count of loss of margin failure occurring on the line ever before." ::= { vdsl2PMLineCurrEntry 65 } hwvdsl2PMLCurr15MDisorderLeavingEvent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is a count of disorder leaving event occurring on the line during current 15 minutes." ::= { vdsl2PMLineCurrEntry 66 } hwvdsl2PMLCurr1DayDisorderLeavingEvent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is a count of disorder leaving event occurring on the line during current 1 day." ::= { vdsl2PMLineCurrEntry 67 } hwvdsl2PMLCurr15MLof OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is a count of loss of frame failure occurring on the line during current 15 minutes." ::= { vdsl2PMLineCurrEntry 68 } hwvdsl2PMLCurr15MLos OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is a count of loss of signal failure occurring on the line during current 15 minutes." ::= { vdsl2PMLineCurrEntry 69 } hwvdsl2PMLCurr15MLop OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is a count of loss of power failure occurring on the line during current 15 minutes." ::= { vdsl2PMLineCurrEntry 70 } hwvdsl2PMLCurr15MLom OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is a count of loss of margin failure occurring on the line during current 15 minutes." ::= { vdsl2PMLineCurrEntry 71 } hwvdsl2PMLCurr1DayLof OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is a count of loss of frame failure occurring on the line during current 1 day." ::= { vdsl2PMLineCurrEntry 72 } hwvdsl2PMLCurr1DayLos OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is a count of loss of signal failure occurring on the line during current 1 day." ::= { vdsl2PMLineCurrEntry 73 } hwvdsl2PMLCurr1DayLop OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is a count of loss of power failure occurring on the line during current 1 day." ::= { vdsl2PMLineCurrEntry 74 } hwvdsl2PMLCurr1DayLom OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is a count of loss of margin failure occurring on the line during current 1 day." ::= { vdsl2PMLineCurrEntry 75 } -- PM line init current counters vdsl2PMLineCurrInitTable OBJECT-TYPE SYNTAX SEQUENCE OF Vdsl2PMLineCurrInitEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table vdsl2PMLineCurrInitTable contains current initialization counters of VDSL2 line. The indexes of this table are an interface index where the interface has an ifType of vdsl2(251) and the termination unit. " ::= { vdsl2PMLine 2 } vdsl2PMLineCurrInitEntry OBJECT-TYPE SYNTAX Vdsl2PMLineCurrInitEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table vdsl2PMLineCurrInitTable contains current initialization counters of VDSL2 line. The indexes of this entry are an interface index where the interface has an ifType of vdsl2(251) and the termination unit. " INDEX { ifIndex } ::= { vdsl2PMLineCurrInitTable 1 } Vdsl2PMLineCurrInitEntry ::= SEQUENCE { vdsl2PMLCurrInit15MTimeElapsed Unsigned32, vdsl2PMLCurrInit15MFullInits Unsigned32, vdsl2PMLCurrInit15MFailedFullInits Unsigned32, vdsl2PMLCurrInit15MShortInits Unsigned32, vdsl2PMLCurrInit15MFailedShortInits Unsigned32, vdsl2PMLCurrInit1DayTimeElapsed Unsigned32, vdsl2PMLCurrInit1DayFullInits Unsigned32, vdsl2PMLCurrInit1DayFailedFullInits Unsigned32, vdsl2PMLCurrInit1DayShortInits Unsigned32, vdsl2PMLCurrInit1DayFailedShortInits Unsigned32, vdsl2PMLInitEverBeforeFullInits Unsigned32, vdsl2PMLInitEverBeforeFailedFullInits Unsigned32, vdsl2PMLInitEverBeforeShortInits Unsigned32, vdsl2PMLInitEverBeforeFailedShortInits Unsigned32, vdsl2PMLineCurrInit15MStartTime DateAndTime, vdsl2PMLineCurrInit1DayStartTime DateAndTime } vdsl2PMLCurrInit15MTimeElapsed OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Total elapsed seconds in this interval. Unit: seconds " ::= { vdsl2PMLineCurrInitEntry 1 } vdsl2PMLCurrInit15MFullInits OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of full initializations attempted on the line (successful and failed) during this interval. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { vdsl2PMLineCurrInitEntry 2 } vdsl2PMLCurrInit15MFailedFullInits OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of failed full initializations on the line during this interval. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { vdsl2PMLineCurrInitEntry 3 } vdsl2PMLCurrInit15MShortInits OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of short initializations attempted on the line (successful and failed) during this interval. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { vdsl2PMLineCurrInitEntry 4 } vdsl2PMLCurrInit15MFailedShortInits OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of failed short initializations on the line during this interval. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { vdsl2PMLineCurrInitEntry 5 } vdsl2PMLCurrInit1DayTimeElapsed OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Total elapsed seconds in this interval. Unit: seconds " ::= { vdsl2PMLineCurrInitEntry 6 } vdsl2PMLCurrInit1DayFullInits OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of full initializations attempted on the line (successful and failed) during this interval. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { vdsl2PMLineCurrInitEntry 7 } vdsl2PMLCurrInit1DayFailedFullInits OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of failed full initializations on the line during this interval. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { vdsl2PMLineCurrInitEntry 8 } vdsl2PMLCurrInit1DayShortInits OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of short initializations attempted on the line (successful and failed) during this interval. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { vdsl2PMLineCurrInitEntry 9 } vdsl2PMLCurrInit1DayFailedShortInits OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of failed short initializations on the line during this interval. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { vdsl2PMLineCurrInitEntry 10 } vdsl2PMLInitEverBeforeFullInits OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of full initializations attempted on the line (successful and failed) since agent reset. Huawei defined. " ::= { vdsl2PMLineCurrInitEntry 11 } vdsl2PMLInitEverBeforeFailedFullInits OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of failed full initializations on the line since agent reset. Huawei defined. " ::= { vdsl2PMLineCurrInitEntry 12 } vdsl2PMLInitEverBeforeShortInits OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of short initializations attempted on the line (successful and failed) since agent reset. Huawei defined. " ::= { vdsl2PMLineCurrInitEntry 13 } vdsl2PMLInitEverBeforeFailedShortInits OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of failed short initializations on the line since agent reset. Huawei defined. " ::= { vdsl2PMLineCurrInitEntry 14 } vdsl2PMLineCurrInit15MStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Start time of the current initializations 15-minute performance statistics." ::= { vdsl2PMLineCurrInitEntry 15 } vdsl2PMLineCurrInit1DayStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Start time of the current initializations 1-day performance statistics." ::= { vdsl2PMLineCurrInitEntry 16 } -- PM line history 15 Minutes vdsl2PMLineHist15MinTable OBJECT-TYPE SYNTAX SEQUENCE OF Vdsl2PMLineHist15MinEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table vdsl2PMLineHist15MinTable contains PM line history for 15min intervals of VDSL2 line. The indexes of this table are an interface index where the interface has an ifType of vdsl2(251), the termination unit, and an interval number. " ::= { vdsl2PMLine 3 } vdsl2PMLineHist15MinEntry OBJECT-TYPE SYNTAX Vdsl2PMLineHist15MinEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table vdsl2PMLineHist15MinTable contains PM line history for 15min intervals of VDSL2 line. The indexes of this entry are an interface index where the interface has an ifType of vdsl2(251), the termination unit, and an interval number. " INDEX { ifIndex, vdsl2PMLHist15MUnit, vdsl2PMLHist15MInterval } ::= { vdsl2PMLineHist15MinTable 1 } Vdsl2PMLineHist15MinEntry ::= SEQUENCE { vdsl2PMLHist15MUnit Vdsl2Unit, vdsl2PMLHist15MInterval Unsigned32, vdsl2PMLHist15MMonitoredTime Unsigned32, vdsl2PMLHist15MFecs Counter32, vdsl2PMLHist15MEs Counter32, vdsl2PMLHist15MSes Counter32, vdsl2PMLHist15MLoss Counter32, vdsl2PMLHist15MUas Counter32, vdsl2PMLHist15MValidInterval TruthValue, vdsl2PMLHist15MLofs Counter32, vdsl2PMLHist15MLols Counter32, vdsl2PMLHist15MLops Counter32, vdsl2PMLHist15MSosSuccess Counter32, vdsl2PMLHist15MInmainpeq OCTET STRING, vdsl2PMLHist15MInmame Counter32, vdsl2PMLHist15MInmaiat OCTET STRING, vdsl2PMLHist15MStartTime DateAndTime, vdsl2PMLHist15MLeftrs Counter32, vdsl2PMLHist15MEfb Counter32, vdsl2PMLHist15MMinEftr Counter32, hwvdsl2PMLHist15MSraDownShiftEvent Counter32, hwvdsl2PMLHist15MSraUpShiftEvent Counter32, hwvdsl2PMLHist15MDisorderLeavingEvent Counter32, hwvdsl2PMLHist15MLof Counter32, hwvdsl2PMLHist15MLos Counter32, hwvdsl2PMLHist15MLop Counter32, hwvdsl2PMLHist15MLom Counter32 } vdsl2PMLHist15MUnit OBJECT-TYPE SYNTAX Vdsl2Unit MAX-ACCESS not-accessible STATUS current DESCRIPTION "The termination unit XTUC{1} or XTUR{2}." ::= { vdsl2PMLineHist15MinEntry 1 } vdsl2PMLHist15MInterval OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The interval number." ::= { vdsl2PMLineHist15MinEntry 2 } vdsl2PMLHist15MMonitoredTime OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Total seconds monitored in this interval. Unit: seconds " ::= { vdsl2PMLineHist15MinEntry 3 } vdsl2PMLHist15MFecs OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds during this interval that there was at least one FEC correction event for one or more bearer channels in this line. This parameter is inhibited during UAS or SES. Unit: seconds " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { vdsl2PMLineHist15MinEntry 4 } vdsl2PMLHist15MEs OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds during this interval that there was: xTU-C: CRC-8 >= 1 for one or more bearer channels OR LOS >= 1 OR SEF >= 1 OR LPR >= 1 xTU-R: FEBE >= 1 for one or more bearer channels OR LOS-FE >= 1 OR RDI >= 1 OR LPR-FE >= 1. This parameter is inhibited during UAS. Unit: seconds " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { vdsl2PMLineHist15MinEntry 5 } vdsl2PMLHist15MSes OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds during this interval that there was: xTU-C: (CRC-8 summed over all bearer channels) >= 18 OR LOS >= 1 OR SEF >= 1 OR LPR >= 1 xTU-R: (FEBE summed over all bearer channels) >= 18 OR LOS-FE >= 1 OR RDI >= 1 OR LPR-FE >= 1. This parameter is inhibited during UAS. Unit: seconds " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { vdsl2PMLineHist15MinEntry 6 } vdsl2PMLHist15MLoss OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds during this interval that there was LOS (or LOS-FE for xTU-R). Unit: seconds " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { vdsl2PMLineHist15MinEntry 7 } vdsl2PMLHist15MUas OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds in Unavailability State during this interval. Unavailability begins at the onset of 10 contiguous severely -errored seconds, and ends at the onset of 10 contiguous seconds with no severely-errored seconds. Unit: seconds " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { vdsl2PMLineHist15MinEntry 8 } vdsl2PMLHist15MValidInterval OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This variable indicates if the data for this interval is valid. " ::= { vdsl2PMLineHist15MinEntry 9 } vdsl2PMLHist15MLofs OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds in the interval when there was Loss of Framing. Unit: seconds " ::= { vdsl2PMLineHist15MinEntry 10 } vdsl2PMLHist15MLols OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds in the interval when there was Loss of Link. Unit: seconds " ::= { vdsl2PMLineHist15MinEntry 11 } vdsl2PMLHist15MLops OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds in the interval when there was Loss of Power. Unit: seconds " ::= { vdsl2PMLineHist15MinEntry 12 } vdsl2PMLHist15MSosSuccess OBJECT-TYPE SYNTAX Counter32 UNITS "times" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the total number of successful SOS procedures initiated in the interval. Unit: times " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { vdsl2PMLineHist15MinEntry 13 } vdsl2PMLHist15MInmainpeq OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..68)) MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is a count of the INMAINPEQi anomalies occurring on the line over the 15 minutes accumulation period. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { vdsl2PMLineHist15MinEntry 14 } vdsl2PMLHist15MInmame OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is a count of the INMAME anomalies occurring on the line over the 15 minutes accumulation period. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { vdsl2PMLineHist15MinEntry 15} vdsl2PMLHist15MInmaiat OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is a count of the INMAIATi anomalies occurring on the line over the 15 minutes accumulation period. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { vdsl2PMLineHist15MinEntry 16} vdsl2PMLHist15MStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Start time of the historical 15-minute performance statistics." ::= { vdsl2PMLineHist15MinEntry 17 } vdsl2PMLHist15MLeftrs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "If retransmission is used in a given transmit direction, this parameter is a count of the seconds with a near-end leftr defect present observed over the 15 minutes accumulation period. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1.1.6 7.2.1.2.6" ::= { vdsl2PMLineHist15MinEntry 18 } vdsl2PMLHist15MEfb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "If retransmission is used in a given transmit direction, this parameter is a count of the number of error-free bits observed over the 15 minutes accumulation period. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1.1.7 7.2.1.2.7" ::= { vdsl2PMLineHist15MinEntry 19 } vdsl2PMLHist15MMinEftr OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "If retransmission is used in a given transmit direction, this parameter reports the minimum of the EFTR(Error-free throughput rate) observed over the 15 minutes accumulation period. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1.1.8 7.2.1.2.8" ::= { vdsl2PMLineHist15MinEntry 20 } hwvdsl2PMLHist15MSraDownShiftEvent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is a count of sra downshift event occurring on the line over the 15 minutes accumulation period." ::= { vdsl2PMLineHist15MinEntry 21 } hwvdsl2PMLHist15MSraUpShiftEvent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is a count of sra upshift event occurring on the line over the 15 minutes accumulation period." ::= { vdsl2PMLineHist15MinEntry 22 } hwvdsl2PMLHist15MDisorderLeavingEvent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is a count of disorder leaving event occurring on the line over the 15 minutes accumulation period." ::= { vdsl2PMLineHist15MinEntry 23 } hwvdsl2PMLHist15MLof OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is a count of loss of frame failure occurring on the line over the 15 minutes accumulation period." ::= { vdsl2PMLineHist15MinEntry 24 } hwvdsl2PMLHist15MLos OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is a count of loss of signal failure occurring on the line over the 15 minutes accumulation period." ::= { vdsl2PMLineHist15MinEntry 25 } hwvdsl2PMLHist15MLop OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is a count of loss of power failure occurring on the line over the 15 minutes accumulation period." ::= { vdsl2PMLineHist15MinEntry 26 } hwvdsl2PMLHist15MLom OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is a count of loss of margin failure occurring on the line over the 15 minutes accumulation period." ::= { vdsl2PMLineHist15MinEntry 27 } -- PM line history 1 Day vdsl2PMLineHist1DayTable OBJECT-TYPE SYNTAX SEQUENCE OF Vdsl2PMLineHist1DayEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table vdsl2PMLineHist1DayTable contains PM line history for 24 hours intervals of VDSL2 line. The indexes of this table are an interface index where the interface has an ifType of vdsl2(251), the termination unit and an interval number. " ::= { vdsl2PMLine 4 } vdsl2PMLineHist1DayEntry OBJECT-TYPE SYNTAX Vdsl2PMLineHist1DayEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table vdsl2PMLineHist1DayTable contains PM line history for 24 hours intervals of VDSL2 line. The indexes of this entry are an interface index where the interface has an ifType of vdsl2(251), the termination unit and an interval number. " INDEX { ifIndex, vdsl2PMLHist1DUnit, vdsl2PMLHist1DInterval } ::= { vdsl2PMLineHist1DayTable 1 } Vdsl2PMLineHist1DayEntry ::= SEQUENCE { vdsl2PMLHist1DUnit Vdsl2Unit, vdsl2PMLHist1DInterval Unsigned32, vdsl2PMLHist1DMonitoredTime Unsigned32, vdsl2PMLHist1DFecs Counter32, vdsl2PMLHist1DEs Counter32, vdsl2PMLHist1DSes Counter32, vdsl2PMLHist1DLoss Counter32, vdsl2PMLHist1DUas Counter32, vdsl2PMLHist1DValidInterval TruthValue, vdsl2PMLHist1DLofs Counter32, vdsl2PMLHist1DLols Counter32, vdsl2PMLHist1DLops Counter32, vdsl2PMLHist1DSosSuccess Counter32, vdsl2PMLHist1DInmainpeq OCTET STRING, vdsl2PMLHist1DInmame Counter32, vdsl2PMLHist1DInmaiat OCTET STRING, vdsl2PMLHist1DStartTime DateAndTime, vdsl2PMLHist1DLeftrs Counter32, vdsl2PMLHist1DEfb Counter32, vdsl2PMLHist1DMinEftr Counter32, hwvdsl2PMLHist1DSraDownShiftEvent Counter32, hwvdsl2PMLHist1DSraUpShiftEvent Counter32, hwvdsl2PMLHist1DDisorderLeavingEvent Counter32, hwvdsl2PMLHist1DLof Counter32, hwvdsl2PMLHist1DLos Counter32, hwvdsl2PMLHist1DLop Counter32, hwvdsl2PMLHist1DLom Counter32 } vdsl2PMLHist1DUnit OBJECT-TYPE SYNTAX Vdsl2Unit MAX-ACCESS not-accessible STATUS current DESCRIPTION "The termination unit." ::= { vdsl2PMLineHist1DayEntry 1 } vdsl2PMLHist1DInterval OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The interval number." ::= { vdsl2PMLineHist1DayEntry 2 } vdsl2PMLHist1DMonitoredTime OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Total seconds monitored in this interval. Unit: seconds " ::= { vdsl2PMLineHist1DayEntry 3 } vdsl2PMLHist1DFecs OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds during this interval that there was at least one FEC correction event for one or more bearer channels in this line. This parameter is inhibited during UAS or SES. Unit: seconds " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { vdsl2PMLineHist1DayEntry 4 } vdsl2PMLHist1DEs OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds during this interval that there was: xTU-C: CRC-8 >= 1 for one or more bearer channels OR LOS >= 1 OR SEF >= 1 OR LPR >= 1 xTU-R: FEBE >= 1 for one or more bearer channels OR LOS-FE >= 1 OR RDI >= 1 OR LPR-FE >= 1. This parameter is inhibited during UAS. Unit: seconds " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { vdsl2PMLineHist1DayEntry 5 } vdsl2PMLHist1DSes OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds during this interval that there was: xTU-C: (CRC-8 summed over all bearer channels) >= 18 OR LOS >= 1 OR SEF >> 1 OR LPR >= 1 xTU-R: (FEBE summed over all bearer channels) >= 18 OR LOS-FE >= 1 OR RDI >= 1 OR LPR-FE >= 1. This parameter is inhibited during UAS. Unit: seconds " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { vdsl2PMLineHist1DayEntry 6 } vdsl2PMLHist1DLoss OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds during this interval that there was LOS (or LOS-FE for xTU-R). Unit: seconds " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { vdsl2PMLineHist1DayEntry 7 } vdsl2PMLHist1DUas OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds in Unavailability State during this interval. Unavailability begins at the onset of 10 contiguous severely -errored seconds, and ends at the onset of 10 contiguous seconds with no severely-errored seconds. Unit: seconds " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { vdsl2PMLineHist1DayEntry 8 } vdsl2PMLHist1DValidInterval OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This variable indicates if the data for this interval is valid. " ::= { vdsl2PMLineHist1DayEntry 9 } vdsl2PMLHist1DLofs OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds during this interval that there was Loss of Framing. Unit: seconds " ::= { vdsl2PMLineHist1DayEntry 10 } vdsl2PMLHist1DLols OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds during this interval that there was Loss of Link. Unit: seconds " ::= { vdsl2PMLineHist1DayEntry 11 } vdsl2PMLHist1DLops OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds during this interval that there was Loss of Power. Unit: seconds " ::= { vdsl2PMLineHist1DayEntry 12 } vdsl2PMLHist1DSosSuccess OBJECT-TYPE SYNTAX Counter32 UNITS "times" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the total number of successful SOS procedures initiated during this interval. Unit: times " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { vdsl2PMLineHist1DayEntry 13 } vdsl2PMLHist1DInmainpeq OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..68)) MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is a count of the INMAINPEQi anomalies occurring on the line over the 24 hours accumulation period. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { vdsl2PMLineHist1DayEntry 14 } vdsl2PMLHist1DInmame OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is a count of the INMAME anomalies occurring on the line over the 24 hours accumulation period. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { vdsl2PMLineHist1DayEntry 15 } vdsl2PMLHist1DInmaiat OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is a count of the INMAIATi anomalies occurring on the line over the 24 hours accumulation period. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { vdsl2PMLineHist1DayEntry 16 } vdsl2PMLHist1DStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Start time of the historical 1-day performance statistics." ::= { vdsl2PMLineHist1DayEntry 17 } vdsl2PMLHist1DLeftrs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "If retransmission is used in a given transmit direction, this parameter is a count of the seconds with a near-end leftr defect present observed over the 24 hours accumulation period. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1.1.6 7.2.1.2.6" ::= { vdsl2PMLineHist1DayEntry 18 } vdsl2PMLHist1DEfb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "If retransmission is used in a given transmit direction, this parameter is a count of the number of error-free bits observed over the 24 hours accumulation period. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1.1.7 7.2.1.2.7" ::= { vdsl2PMLineHist1DayEntry 19 } vdsl2PMLHist1DMinEftr OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "If retransmission is used in a given transmit direction, this parameter reports the minimum of the EFTR(Error-free throughput rate) observed over the 24 hours accumulation period. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1.1.8 7.2.1.2.8" ::= { vdsl2PMLineHist1DayEntry 20 } hwvdsl2PMLHist1DSraDownShiftEvent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is a count of sra downshift event occurring on the line over the 24 hours accumulation period." ::= { vdsl2PMLineHist1DayEntry 21 } hwvdsl2PMLHist1DSraUpShiftEvent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is a count of sra upshift event occurring on the line over the 24 hours accumulation period." ::= { vdsl2PMLineHist1DayEntry 22 } hwvdsl2PMLHist1DDisorderLeavingEvent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is a count of disorder leaving event occurring on the line over the 24 hours accumulation period." ::= { vdsl2PMLineHist1DayEntry 23 } hwvdsl2PMLHist1DLof OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is a count of loss of frame failure occurring on the line over the 24 hours accumulation period." ::= { vdsl2PMLineHist1DayEntry 24 } hwvdsl2PMLHist1DLos OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is a count of loss of signal failure occurring on the line over the 24 hours accumulation period." ::= { vdsl2PMLineHist1DayEntry 25 } hwvdsl2PMLHist1DLop OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is a count of loss of power failure occurring on the line over the 24 hours accumulation period." ::= { vdsl2PMLineHist1DayEntry 26 } hwvdsl2PMLHist1DLom OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is a count of loss of margin failure occurring on the line over the 24 hours accumulation period." ::= { vdsl2PMLineHist1DayEntry 27 } -- PM line init history 15 Minutes vdsl2PMLineInitHist15MinTable OBJECT-TYPE SYNTAX SEQUENCE OF Vdsl2PMLineInitHist15MinEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table vdsl2PMLineInitHist15MinTable contains PM line initialization history for 15 minutes intervals of VDSL2 line. The indexes of this table are an interface index where the interface has an ifType of vdsl2(251) and an interval number. " ::= { vdsl2PMLine 5 } vdsl2PMLineInitHist15MinEntry OBJECT-TYPE SYNTAX Vdsl2PMLineInitHist15MinEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table vdsl2PMLineInitHist15MinTable contains PM line initialization history for 15 minutes intervals of VDSL2 line. The indexes of this entry are an interface index where the interface has an ifType of vdsl2(251) and an interval number. " INDEX { ifIndex, vdsl2PMLHistInit15MInterval } ::= { vdsl2PMLineInitHist15MinTable 1 } Vdsl2PMLineInitHist15MinEntry ::= SEQUENCE { vdsl2PMLHistInit15MInterval Unsigned32, vdsl2PMLHistInit15MMonitoredTime Unsigned32, vdsl2PMLHistInit15MFullInits Unsigned32, vdsl2PMLHistInit15MFailedFullInits Unsigned32, vdsl2PMLHistInit15MShortInits Unsigned32, vdsl2PMLHistInit15MFailedShortInits Unsigned32, vdsl2PMLHistInit15MValidInterval TruthValue, vdsl2PMLHistInit15MStartTime DateAndTime } vdsl2PMLHistInit15MInterval OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The interval number." ::= { vdsl2PMLineInitHist15MinEntry 1 } vdsl2PMLHistInit15MMonitoredTime OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Total seconds monitored in this interval. Unit: seconds " ::= { vdsl2PMLineInitHist15MinEntry 2 } vdsl2PMLHistInit15MFullInits OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of full initializations attempted on the line (successful and failed) during this interval. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { vdsl2PMLineInitHist15MinEntry 3 } vdsl2PMLHistInit15MFailedFullInits OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of failed full initializations on the line during this interval. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { vdsl2PMLineInitHist15MinEntry 4 } vdsl2PMLHistInit15MShortInits OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of short initializations attempted on the line (successful and failed) during this interval. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { vdsl2PMLineInitHist15MinEntry 5 } vdsl2PMLHistInit15MFailedShortInits OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of failed short initializations on the line during this interval. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { vdsl2PMLineInitHist15MinEntry 6 } vdsl2PMLHistInit15MValidInterval OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This variable indicates if the data for this interval is valid. " ::= { vdsl2PMLineInitHist15MinEntry 7 } vdsl2PMLHistInit15MStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Start time of the historical initializations 15-minute performance statistics." ::= { vdsl2PMLineInitHist15MinEntry 8 } -- PM line init history 1 Day vdsl2PMLineInitHist1DayTable OBJECT-TYPE SYNTAX SEQUENCE OF Vdsl2PMLineInitHist1DayEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table vdsl2PMLineInitHist1DayTable contains PM line initialization history for 24 hours intervals of VDSL2 line. The indexes of this table are an interface index where the interface has an ifType of vdsl2(251) and an interval number. " ::= { vdsl2PMLine 6 } vdsl2PMLineInitHist1DayEntry OBJECT-TYPE SYNTAX Vdsl2PMLineInitHist1DayEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table vdsl2PMLineInitHist1DayTable contains PM line initialization history for 24 hours intervals of VDSL2 line. The indexes of this entry are an interface index where the interface has an ifType of vdsl2(251) and an interval number. " INDEX { ifIndex, vdsl2PMLHistinit1DInterval } ::= { vdsl2PMLineInitHist1DayTable 1 } Vdsl2PMLineInitHist1DayEntry ::= SEQUENCE { vdsl2PMLHistinit1DInterval Unsigned32, vdsl2PMLHistinit1DMonitoredTime Unsigned32, vdsl2PMLHistinit1DFullInits Unsigned32, vdsl2PMLHistinit1DFailedFullInits Unsigned32, vdsl2PMLHistinit1DShortInits Unsigned32, vdsl2PMLHistinit1DFailedShortInits Unsigned32, vdsl2PMLHistinit1DValidInterval TruthValue, vdsl2PMLHistinit1DStartTime DateAndTime } vdsl2PMLHistinit1DInterval OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The interval number." ::= { vdsl2PMLineInitHist1DayEntry 1 } vdsl2PMLHistinit1DMonitoredTime OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Total seconds monitored in this interval." ::= { vdsl2PMLineInitHist1DayEntry 2 } vdsl2PMLHistinit1DFullInits OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of full initializations attempted on the line (successful and failed) during this interval. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { vdsl2PMLineInitHist1DayEntry 3 } vdsl2PMLHistinit1DFailedFullInits OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of failed full initializations on the line during this interval. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { vdsl2PMLineInitHist1DayEntry 4 } vdsl2PMLHistinit1DShortInits OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of short initializations attempted on the line (successful and failed) during this interval. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { vdsl2PMLineInitHist1DayEntry 5 } vdsl2PMLHistinit1DFailedShortInits OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of failed short initializations on the line during this interval. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { vdsl2PMLineInitHist1DayEntry 6 } vdsl2PMLHistinit1DValidInterval OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This variable indicates if the data for this interval is valid. " ::= { vdsl2PMLineInitHist1DayEntry 7 } vdsl2PMLHistinit1DStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Start time of the historical initializations 1-day performance statistics." ::= { vdsl2PMLineInitHist1DayEntry 8 } -- PM channel current counters vdsl2PMChCurrTable OBJECT-TYPE SYNTAX SEQUENCE OF Vdsl2PMChCurrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table vdsl2PMChCurrTable contains current Performance Monitoring results of VDSL2 channel. The indexes of this table are an interface index where the interface has an ifType value which is applicable for a DSL channel and the termination unit. " ::= { vdsl2PMChannel 1 } vdsl2PMChCurrEntry OBJECT-TYPE SYNTAX Vdsl2PMChCurrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table vdsl2PMChCurrTable contains current Performance Monitoring results of VDSL2 channel. The indexes of this entry are an interface index where the interface has an ifType value which is applicable for a DSL channel and the termination unit. " INDEX { ifIndex, vdsl2PMChCurrUnit } ::= { vdsl2PMChCurrTable 1 } Vdsl2PMChCurrEntry ::= SEQUENCE { vdsl2PMChCurrUnit Vdsl2Unit, vdsl2PMChCurrValidIntervals Unsigned32, vdsl2PMChCurrInvalidIntervals Unsigned32, vdsl2PMChCurr15MTimeElapsed HCPerfTimeElapsed, vdsl2PMChCurr15MCodingViolations Unsigned32, vdsl2PMChCurr15MCorrectedBlocks Unsigned32, vdsl2PMChCurr1DayValidIntervals Unsigned32, vdsl2PMChCurr1DayInvalidIntervals Unsigned32, vdsl2PMChCurr1DayTimeElapsed HCPerfTimeElapsed, vdsl2PMChCurr1DayCodingViolations Unsigned32, vdsl2PMChCurr1DayCorrectedBlocks Unsigned32, vdsl2PMChEverBeforeCodingViolations Unsigned32, vdsl2PMChEverBeforeCorrectedBlocks Unsigned32, vdsl2PMChCurr15MEncodedBlocks Unsigned32, vdsl2PMChCurr15MUncorrectableBlocks Unsigned32, vdsl2PMChCurr1DayEncodedBlocks Unsigned32, vdsl2PMChCurr1DayUncorrectableBlocks Unsigned32, vdsl2PMChEverBeforeEncodedBlocks Unsigned32, vdsl2PMChEverBeforeUncorrectableBlocks Unsigned32, vdsl2PMChCurr15MAtmCells Counter32, vdsl2PMChCurr15MPtmPackets Counter32, vdsl2PMChCurr1DayAtmCells Counter32, vdsl2PMChCurr1DayPtmPackets Counter32, vdsl2PMChEverBeforeAtmCells Counter64, vdsl2PMChEverBeforePtmPackets Counter64, vdsl2PMChCurr15MRtxCW Counter32, vdsl2PMChCurr15MRtxCorrectedCW Counter32, vdsl2PMChCurr15MRtxUncorrectedCW Counter32, vdsl2PMChCurr1DayRtxCW Counter32, vdsl2PMChCurr1DayRtxCorrectedCW Counter32, vdsl2PMChCurr1DayRtxUncorrectedCW Counter32, vdsl2PMChEverBeforeRtxCW Counter32, vdsl2PMChEverBeforeRtxCorrectedCW Counter32, vdsl2PMChEverBeforeRtxUncorrectedCW Counter32, vdsl2PMChCurr15MStartTime DateAndTime, vdsl2PMChCurr1DayStartTime DateAndTime } vdsl2PMChCurrUnit OBJECT-TYPE SYNTAX Vdsl2Unit MAX-ACCESS not-accessible STATUS current DESCRIPTION "The termination unit." ::= { vdsl2PMChCurrEntry 1 } vdsl2PMChCurrValidIntervals OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid intervals." ::= { vdsl2PMChCurrEntry 2 } vdsl2PMChCurrInvalidIntervals OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Invalid intervals." ::= { vdsl2PMChCurrEntry 3 } vdsl2PMChCurr15MTimeElapsed OBJECT-TYPE SYNTAX HCPerfTimeElapsed UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Total elapsed seconds in this interval. Unit: seconds " ::= { vdsl2PMChCurrEntry 4 } vdsl2PMChCurr15MCodingViolations OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of CRC-8 (FEBE for xTU-R) anomalies occurring in the channel during the interval. This parameter is inhibited during UAS or SES. If the CRC is applied over multiple channels, then each related CRC-8 (or FEBE) anomaly should increment each of the counters related to the individual channels. " REFERENCE "ITU-T G.997.1, paragraph 7.2.2" ::= { vdsl2PMChCurrEntry 5 } vdsl2PMChCurr15MCorrectedBlocks OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of FEC (FFEC for xTU-R) anomalies (corrected code words) occurring in the channel during the interval. This parameter is inhibited during UAS or SES. If the FEC is applied over multiple channels, then each related FEC (or FFEC) anomaly should increment each of the counters related to the individual channels. " REFERENCE "ITU-T G.997.1, paragraph 7.2.2" ::= { vdsl2PMChCurrEntry 6 } vdsl2PMChCurr1DayValidIntervals OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid intervals." ::= { vdsl2PMChCurrEntry 7 } vdsl2PMChCurr1DayInvalidIntervals OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Invalid intervals." ::= { vdsl2PMChCurrEntry 8 } vdsl2PMChCurr1DayTimeElapsed OBJECT-TYPE SYNTAX HCPerfTimeElapsed UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Total elapsed seconds in this interval. Unit: seconds " ::= { vdsl2PMChCurrEntry 9 } vdsl2PMChCurr1DayCodingViolations OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of CRC-8 (FEBE for xTU-R) anomalies occurring in the channel during the interval. This parameter is inhibited during UAS or SES. If the CRC is applied over multiple channels, then each related CRC-8 (or FEBE) anomaly should increment each of the counters related to the individual channels. " REFERENCE "ITU-T G.997.1, paragraph 7.2.2" ::= { vdsl2PMChCurrEntry 10 } vdsl2PMChCurr1DayCorrectedBlocks OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of FEC (FFEC for xTU-R) anomalies (corrected code words) occurring in the channel during the interval. This parameter is inhibited during UAS or SES. If the FEC is applied over multiple channels, then each related FEC (or FFEC) anomaly should increment each of the counters related to the individual channels. " REFERENCE "ITU-T G.997.1, paragraph 7.2.2" ::= { vdsl2PMChCurrEntry 11 } vdsl2PMChEverBeforeCodingViolations OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of CRC-8 (FEBE for xTU-R) anomalies occurring in the channel since agent reset. This parameter is inhibited during UAS or SES. If the CRC is applied over multiple channels, then each related CRC-8 (or FEBE) anomaly should increment each of the counters related to the individual channels. Huawei defined. " ::= { vdsl2PMChCurrEntry 12 } vdsl2PMChEverBeforeCorrectedBlocks OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of FEC (FFEC for xTU-R) anomalies (corrected code words) occurring in the channel since agent reset. This parameter is inhibited during UAS or SES. If the FEC is applied over multiple channels, then each related FEC (or FFEC) anomaly should increment each of the counters related to the individual channels. Huawei defined. " ::= { vdsl2PMChCurrEntry 13 } vdsl2PMChCurr15MEncodedBlocks OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all encoded blocks received on this channel within the current 15 minute interval. " ::= { vdsl2PMChCurrEntry 14 } vdsl2PMChCurr15MUncorrectableBlocks OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all blocks received with uncorrectable errors on this channel within the current 15 minute interval. " ::= { vdsl2PMChCurrEntry 15 } vdsl2PMChCurr1DayEncodedBlocks OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all encoded blocks received on this channel during the current day." ::= { vdsl2PMChCurrEntry 16 } vdsl2PMChCurr1DayUncorrectableBlocks OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all blocks received with uncorrectable errors on this channel during the current day." ::= { vdsl2PMChCurrEntry 17 } vdsl2PMChEverBeforeEncodedBlocks OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all encoded blocks received on this channel since agent reset. " ::= { vdsl2PMChCurrEntry 18 } vdsl2PMChEverBeforeUncorrectableBlocks OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all blocks received with uncorrectable errors since agent reset. " ::= { vdsl2PMChCurrEntry 19 } vdsl2PMChCurr15MAtmCells OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of Atm Cells received within the current 15 minute interval. " ::= { vdsl2PMChCurrEntry 20 } vdsl2PMChCurr15MPtmPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of Ptm Packet received within the current 15 minute interval. " ::= { vdsl2PMChCurrEntry 21 } vdsl2PMChCurr1DayAtmCells OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of Atm Cells received during the current day. " ::= { vdsl2PMChCurrEntry 22 } vdsl2PMChCurr1DayPtmPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of Ptm Packets received during the current day. " ::= { vdsl2PMChCurrEntry 23 } vdsl2PMChEverBeforeAtmCells OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of Atm Cells received since agent reset. " ::= { vdsl2PMChCurrEntry 24 } vdsl2PMChEverBeforePtmPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of Ptm Packets received since agent reset." ::= { vdsl2PMChCurrEntry 25 } vdsl2PMChCurr15MRtxCW OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of units request retransmission within the current 15 minute interval." ::= { vdsl2PMChCurrEntry 26 } vdsl2PMChCurr15MRtxCorrectedCW OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of units corrected by retransmission within the current 15 minute interval." ::= { vdsl2PMChCurrEntry 27 } vdsl2PMChCurr15MRtxUncorrectedCW OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of units uncorrected by retransmission within the current 15 minute interval." ::= { vdsl2PMChCurrEntry 28 } vdsl2PMChCurr1DayRtxCW OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of units request retransmission during the current day." ::= { vdsl2PMChCurrEntry 29 } vdsl2PMChCurr1DayRtxCorrectedCW OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of units corrected by retransmission during the current day." ::= { vdsl2PMChCurrEntry 30 } vdsl2PMChCurr1DayRtxUncorrectedCW OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of units uncorrected by retransmission during the current day." ::= { vdsl2PMChCurrEntry 31 } vdsl2PMChEverBeforeRtxCW OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of units request retransmission since agent reset." ::= { vdsl2PMChCurrEntry 32 } vdsl2PMChEverBeforeRtxCorrectedCW OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of units corrected by retransmission since agent reset." ::= { vdsl2PMChCurrEntry 33 } vdsl2PMChEverBeforeRtxUncorrectedCW OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of units uncorrected by retransmission since agent reset." ::= { vdsl2PMChCurrEntry 34 } vdsl2PMChCurr15MStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Start time of the channel current 15-minute performance statistics." ::= { vdsl2PMChCurrEntry 35 } vdsl2PMChCurr1DayStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Start time of the channel current 1-day performance statistics." ::= { vdsl2PMChCurrEntry 36 } -- PM channel history 15 Minutes vdsl2PMChHist15MinTable OBJECT-TYPE SYNTAX SEQUENCE OF Vdsl2PMChHist15MinEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table vdsl2PMChHist15MinTable contains PM channel history for 15min intervals of VDSL2 channel. The indexes of this table are an interface index where the interface has an ifType value which is applicable for a DSL channel, the termination unit and the interval number. " ::= { vdsl2PMChannel 2 } vdsl2PMChHist15MinEntry OBJECT-TYPE SYNTAX Vdsl2PMChHist15MinEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table vdsl2PMChHist15MinTable contains PM channel history for 15min intervals of VDSL2 channel. The indexes of this entry are an interface index where the interface has an ifType value which is applicable for a DSL channel, the termination unit and the interval number. " INDEX { ifIndex, vdsl2PMChHist15MUnit, vdsl2PMChHist15MInterval } ::= { vdsl2PMChHist15MinTable 1 } Vdsl2PMChHist15MinEntry ::= SEQUENCE { vdsl2PMChHist15MUnit Vdsl2Unit, vdsl2PMChHist15MInterval Unsigned32, vdsl2PMChHist15MMonitoredTime Unsigned32, vdsl2PMChHist15MCodingViolations Unsigned32, vdsl2PMChHist15MCorrectedBlocks Unsigned32, vdsl2PMChHist15MValidInterval TruthValue, vdsl2PMChHist15MEncodedBlocks Unsigned32, vdsl2PMChHist15MUncorrectableBlocks Unsigned32, vdsl2PMChHist15MAtmCells Counter32, vdsl2PMChHist15MPtmPackets Counter32, vdsl2PMChHist15MRtxCW Counter32, vdsl2PMChHist15MRtxCorrectedCW Counter32, vdsl2PMChHist15MRtxUncorrectedCW Counter32, vdsl2PMChHist15MStartTime DateAndTime } vdsl2PMChHist15MUnit OBJECT-TYPE SYNTAX Vdsl2Unit MAX-ACCESS not-accessible STATUS current DESCRIPTION "The termination unit." ::= { vdsl2PMChHist15MinEntry 1 } vdsl2PMChHist15MInterval OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The interval number." ::= { vdsl2PMChHist15MinEntry 2 } vdsl2PMChHist15MMonitoredTime OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Total seconds monitored in this interval. Unit: seconds " ::= { vdsl2PMChHist15MinEntry 3 } vdsl2PMChHist15MCodingViolations OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of CRC-8 (FEBE for xTU-R) anomalies occurring in the channel during the interval. This parameter is inhibited during UAS or SES. If the CRC is applied over multiple channels, then each related CRC-8 (or FEBE) anomaly should increment each of the counters related to the individual channels. " REFERENCE "ITU-T G.997.1, paragraph 7.2.2" ::= { vdsl2PMChHist15MinEntry 4 } vdsl2PMChHist15MCorrectedBlocks OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of FEC (FFEC for xTU-R) anomalies (corrected code words) occurring in the channel during the interval. This parameter is inhibited during UAS or SES. If the FEC is applied over multiple channels, then each related FEC (or FFEC) anomaly should increment each of the counters related to the individual channels. " REFERENCE "ITU-T G.997.1, paragraph 7.2.2" ::= { vdsl2PMChHist15MinEntry 5 } vdsl2PMChHist15MValidInterval OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This variable indicates if the data for this interval is valid. " ::= { vdsl2PMChHist15MinEntry 6 } vdsl2PMChHist15MEncodedBlocks OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all encoded blocks received on this channel during the interval. " ::= { vdsl2PMChHist15MinEntry 7 } vdsl2PMChHist15MUncorrectableBlocks OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all blocks received with uncorrectable errors on this channel during the interval. " ::= { vdsl2PMChHist15MinEntry 8 } vdsl2PMChHist15MAtmCells OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of Atm Cells received on this channel during the interval. " ::= { vdsl2PMChHist15MinEntry 9 } vdsl2PMChHist15MPtmPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of Ptm Packets received on this channel during the interval. " ::= { vdsl2PMChHist15MinEntry 10 } vdsl2PMChHist15MRtxCW OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of units request retransmission during the serval 15 minute interval of history. " ::= { vdsl2PMChHist15MinEntry 11 } vdsl2PMChHist15MRtxCorrectedCW OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of units corrected by retransmission during the serval 15 minute interval of history. " ::= { vdsl2PMChHist15MinEntry 12 } vdsl2PMChHist15MRtxUncorrectedCW OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of units uncorrected by retransmission during the serval 15 minute interval of history. " ::= { vdsl2PMChHist15MinEntry 13 } vdsl2PMChHist15MStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Start time of the channel historical 15-minute performance statistics. " ::= { vdsl2PMChHist15MinEntry 14 } -- PM channel history 1 Day vdsl2PMChHist1DTable OBJECT-TYPE SYNTAX SEQUENCE OF Vdsl2PMChHist1DEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table vdsl2PMChHist1DTable contains PM channel history for 1 day intervals of VDSL2. The indexes of this table are an interface index where the interface has an ifType value which is applicable for a DSL channel, the termination unit and the interval number. " ::= { vdsl2PMChannel 3 } vdsl2PMChHist1DEntry OBJECT-TYPE SYNTAX Vdsl2PMChHist1DEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table vdsl2PMChHist1DTable contains PM channel history for 1 day intervals of VDSL2. The indexes of this entry are an interface index where the interface has an ifType value which is applicable for a DSL channel, the termination unit and the interval number. " INDEX { ifIndex, vdsl2PMChHist1DUnit, vdsl2PMChHist1DInterval } ::= { vdsl2PMChHist1DTable 1 } Vdsl2PMChHist1DEntry ::= SEQUENCE { vdsl2PMChHist1DUnit Vdsl2Unit, vdsl2PMChHist1DInterval Unsigned32, vdsl2PMChHist1DMonitoredTime Unsigned32, vdsl2PMChHist1DCodingViolations Unsigned32, vdsl2PMChHist1DCorrectedBlocks Unsigned32, vdsl2PMChHist1DValidInterval TruthValue, vdsl2PMChHist1DEncodedBlocks Unsigned32, vdsl2PMChHist1DUncorrectableBlocks Unsigned32, vdsl2PMChHist1DAtmCells Counter32, vdsl2PMChHist1DPtmPackets Counter32, vdsl2PMChHist1DRtxCW Counter32, vdsl2PMChHist1DRtxCorrectedCW Counter32, vdsl2PMChHist1DRtxUncorrectedCW Counter32, vdsl2PMChHist1DStartTime DateAndTime } vdsl2PMChHist1DUnit OBJECT-TYPE SYNTAX Vdsl2Unit MAX-ACCESS not-accessible STATUS current DESCRIPTION "The termination unit." ::= { vdsl2PMChHist1DEntry 1 } vdsl2PMChHist1DInterval OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The interval number." ::= { vdsl2PMChHist1DEntry 2 } vdsl2PMChHist1DMonitoredTime OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Total seconds monitored in this interval. Unit: seconds " ::= { vdsl2PMChHist1DEntry 3 } vdsl2PMChHist1DCodingViolations OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of CRC-8 (FEBE for xTU-R) anomalies occurring in the channel during the interval. This parameter is inhibited during UAS or SES. If the CRC is applied over multiple channels, then each related CRC-8 (or FEBE) anomaly should increment each of the counters related to the individual channels. " REFERENCE "ITU-T G.997.1, paragraph 7.2.2" ::= { vdsl2PMChHist1DEntry 4 } vdsl2PMChHist1DCorrectedBlocks OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of FEC (FFEC for xTU-R) anomalies (corrected code words) occurring in the channel during the interval. This parameter is inhibited during UAS or SES. If the FEC is applied over multiple channels, then each related FEC (or FFEC) anomaly should increment each of the counters related to the individual channels. " REFERENCE "ITU-T G.997.1, paragraph 7.2.2" ::= { vdsl2PMChHist1DEntry 5 } vdsl2PMChHist1DValidInterval OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This variable indicates if the data for this interval is valid. " ::= { vdsl2PMChHist1DEntry 6 } vdsl2PMChHist1DEncodedBlocks OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all encoded blocks received on this channel during the interval. " ::= { vdsl2PMChHist1DEntry 7 } vdsl2PMChHist1DUncorrectableBlocks OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all blocks received with uncorrectable errors on this channel during the interval." ::= { vdsl2PMChHist1DEntry 8 } vdsl2PMChHist1DAtmCells OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of Atm Cells received on this channel during the interval. " ::= { vdsl2PMChHist1DEntry 9 } vdsl2PMChHist1DPtmPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of Ptm Packets received on this channel during the interval. " ::= { vdsl2PMChHist1DEntry 10 } vdsl2PMChHist1DRtxCW OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of units request retransmission within the serval one day interval of history. " ::= { vdsl2PMChHist1DEntry 11 } vdsl2PMChHist1DRtxCorrectedCW OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of units corrected by retransmission during the serval one day interval of history. " ::= { vdsl2PMChHist1DEntry 12 } vdsl2PMChHist1DRtxUncorrectedCW OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of units uncorrected by retransmission during the serval one day interval of history. " ::= { vdsl2PMChHist1DEntry 13 } vdsl2PMChHist1DStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Start time of the channel historical 1-day performance statistics." ::= { vdsl2PMChHist1DEntry 14 } -- PM channel chipset statistics vdsl2PMChChipStatTable OBJECT-TYPE SYNTAX SEQUENCE OF Vdsl2PMChChipStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table vdsl2PMChChipStatTable contains packets and CRC errors on chipset of upstream and downstream of VDSL2 channel. The indexes of this table are an interface index where the interface has an ifType value which is applicable for a DSL channel and the termination unit. " ::= { vdsl2PMChannel 4 } vdsl2PMChChipStatEntry OBJECT-TYPE SYNTAX Vdsl2PMChChipStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table vdsl2PMChChipStatTable contains packets and CRC errors on chipset of upstream and downstream of VDSL2 channel. The indexes of this entry are an interface index where the interface has an ifType value which is applicable for a DSL channel and the termination unit. " INDEX { ifIndex, vdsl2PMChChipstatUnit } ::= { vdsl2PMChChipStatTable 1 } Vdsl2PMChChipStatEntry ::= SEQUENCE { vdsl2PMChChipstatUnit Vdsl2Unit, vdsl2PMChPktsDs Unsigned32, vdsl2PMChPktsUs Unsigned32, vdsl2PMChCrcErrsDs Unsigned32, vdsl2PMChCrcErrsUs Unsigned32, vdsl2PMChStatAdminStatus INTEGER } vdsl2PMChChipstatUnit OBJECT-TYPE SYNTAX Vdsl2Unit MAX-ACCESS not-accessible STATUS current DESCRIPTION "The termination unit." ::= { vdsl2PMChChipStatEntry 1 } vdsl2PMChPktsDs OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of downstream packets." ::= { vdsl2PMChChipStatEntry 2 } vdsl2PMChPktsUs OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of upstream packets." ::= { vdsl2PMChChipStatEntry 3 } vdsl2PMChCrcErrsDs OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of downstream CRC errors." ::= { vdsl2PMChChipStatEntry 4 } vdsl2PMChCrcErrsUs OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of upstream CRC errors." ::= { vdsl2PMChChipStatEntry 5 } vdsl2PMChStatAdminStatus OBJECT-TYPE SYNTAX INTEGER { reset(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Clear the number of packets transmitted and received, CRC errors upstream and downstream. Options: 1. reset(1) - reset statistic data " ::= { vdsl2PMChChipStatEntry 6 } -- Notifications Group vdsl2LinePerfFECSThreshXtuc NOTIFICATION-TYPE OBJECTS { vdsl2PMLCurr15MFecs, vdsl2LineAlarmConfProfileXtucThresh15MinFecs } STATUS current DESCRIPTION "This notification indicates that the FEC seconds threshold has been reached/exceeded for the referred xTU-C. " ::= { vdsl2Notifications 1 } vdsl2LinePerfFECSThreshXtur NOTIFICATION-TYPE OBJECTS { vdsl2PMLCurr15MFecs, vdsl2LineAlarmConfProfileXturThresh15MinFecs } STATUS current DESCRIPTION "This notification indicates that the FEC seconds threshold has been reached/exceeded for the referred xTU-R. " ::= { vdsl2Notifications 2 } vdsl2LinePerfESThreshXtuc NOTIFICATION-TYPE OBJECTS { vdsl2PMLCurr15MEs, vdsl2LineAlarmConfProfileXtucThresh15MinEs } STATUS current DESCRIPTION "This notification indicates that the errored seconds threshold has been reached/exceeded for the referred xTU-C. " ::= { vdsl2Notifications 3 } vdsl2LinePerfESThreshXtur NOTIFICATION-TYPE OBJECTS { vdsl2PMLCurr15MEs, vdsl2LineAlarmConfProfileXturThresh15MinEs } STATUS current DESCRIPTION "This notification indicates that the errored seconds threshold has been reached/exceeded for the referred xTU-R. " ::= { vdsl2Notifications 4 } vdsl2LinePerfSESThreshXtuc NOTIFICATION-TYPE OBJECTS { vdsl2PMLCurr15MSes, vdsl2LineAlarmConfProfileXtucThresh15MinSes } STATUS current DESCRIPTION "This notification indicates that the severely-errored seconds threshold has been reached/exceeded for the referred xTU-C. " ::= { vdsl2Notifications 5 } vdsl2LinePerfSESThreshXtur NOTIFICATION-TYPE OBJECTS { vdsl2PMLCurr15MSes, vdsl2LineAlarmConfProfileXturThresh15MinSes } STATUS current DESCRIPTION "This notification indicates that the severely-errored seconds threshold has been reached/exceeded for the referred xTU-R. " ::= { vdsl2Notifications 6 } vdsl2LinePerfLOSSThreshXtuc NOTIFICATION-TYPE OBJECTS { vdsl2PMLCurr15MLoss, vdsl2LineAlarmConfProfileXtucThresh15MinLoss } STATUS current DESCRIPTION "This notification indicates that the LOS seconds threshold has been reached/exceeded for the referred xTU-C. " ::= { vdsl2Notifications 7 } vdsl2LinePerfLOSSThreshXtur NOTIFICATION-TYPE OBJECTS { vdsl2PMLCurr15MLoss, vdsl2LineAlarmConfProfileXturThresh15MinLoss } STATUS current DESCRIPTION "This notification indicates that the LOS seconds threshold has been reached/exceeded for the referred xTU-R. " ::= { vdsl2Notifications 8 } vdsl2LinePerfUASThreshXtuc NOTIFICATION-TYPE OBJECTS { vdsl2PMLCurr15MUas, vdsl2LineAlarmConfProfileXtucThresh15MinUas } STATUS current DESCRIPTION "This notification indicates that the unavailable seconds threshold has been reached/exceeded for the referred xTU-C. " ::= { vdsl2Notifications 9 } vdsl2LinePerfUASThreshXtur NOTIFICATION-TYPE OBJECTS { vdsl2PMLCurr15MUas, vdsl2LineAlarmConfProfileXturThresh15MinUas } STATUS current DESCRIPTION "This notification indicates that the unavailable seconds threshold has been reached/exceeded for the referred xTU-R. " ::= { vdsl2Notifications 10 } vdsl2LinePerfCodingViolationsThreshXtuc NOTIFICATION-TYPE OBJECTS { vdsl2PMChCurr15MCodingViolations, vdsl2ChAlarmConfProfileXtucThresh15MinCodingViolations } STATUS current DESCRIPTION "This notification indicates that the coding violations threshold has been reached/exceeded for the referred xTU-C. " ::= { vdsl2Notifications 11 } vdsl2LinePerfCodingViolationsThreshXtur NOTIFICATION-TYPE OBJECTS { vdsl2PMChCurr15MCodingViolations, vdsl2ChAlarmConfProfileXturThresh15MinCodingViolations } STATUS current DESCRIPTION "This notification indicates that the coding violations threshold has been reached/exceeded for the referred xTU-R. " ::= { vdsl2Notifications 12 } vdsl2LinePerfCorrectedThreshXtuc NOTIFICATION-TYPE OBJECTS { vdsl2PMChCurr15MCorrectedBlocks, vdsl2ChAlarmConfProfileXtucThresh15MinCorrected } STATUS current DESCRIPTION "This notification indicates that the corrected blocks (FEC events) threshold has been reached/exceeded for the referred xTU-C. " ::= { vdsl2Notifications 13 } vdsl2LinePerfCorrectedThreshXtur NOTIFICATION-TYPE OBJECTS { vdsl2PMChCurr15MCorrectedBlocks, vdsl2ChAlarmConfProfileXturThresh15MinCorrected } STATUS current DESCRIPTION "This notification indicates that the corrected blocks (FEC events) threshold has been reached/exceeded for the referred xTU-R. " ::= { vdsl2Notifications 14 } vdsl2LinePerfFailedFullInitThresh NOTIFICATION-TYPE OBJECTS { vdsl2PMLCurrInit15MFailedFullInits, vdsl2LineAlarmConfProfileThresh15MinFailedFullInt } STATUS current DESCRIPTION "This notification indicates that the failed full initializations threshold has been reached/exceeded for the referred VDSL/VDSL2 or VDSL2 line. " ::= { vdsl2Notifications 15 } vdsl2LinePerfFailedShortInitThresh NOTIFICATION-TYPE OBJECTS { vdsl2PMLCurrInit15MFailedShortInits, vdsl2LineAlarmConfProfileThresh15MinFailedShrtInt } STATUS current DESCRIPTION "This notification indicates that the failed short initializations threshold has been reached/exceeded for the referred VDSL or VDSL2 line. " ::= { vdsl2Notifications 16 } vdsl2LineStatusChangeXtuc NOTIFICATION-TYPE OBJECTS { vdsl2LineStatusXtuc } STATUS current DESCRIPTION "This notification indicates that a status change is detected for the referred xTU-C. " ::= { vdsl2Notifications 17 } vdsl2LineStatusChangeXtur NOTIFICATION-TYPE OBJECTS { vdsl2LineStatusXtur } STATUS current DESCRIPTION "This notification indicates that a status change is detected for the referred xTU-R. " ::= { vdsl2Notifications 18 } vdsl2LinePerfFullInitThresh NOTIFICATION-TYPE OBJECTS { vdsl2PMLCurrInit15MFullInits, vdsl2LineAlarmConfProfileThresh15MinFullInt } STATUS current DESCRIPTION "This notification indicates that the full initializations threshold has been reached/exceeded for the referred VDSL/VDSL2 or VDSL2 line. " ::= { vdsl2Notifications 19 } -- conformance information vdsl2Groups OBJECT IDENTIFIER ::= { vdsl2Conformance 1 } vdsl2Compliances OBJECT IDENTIFIER ::= { vdsl2Conformance 2 } vdsl2LineMibCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for SNMP entities which manage VDSL2 interfaces. " MODULE -- this module MANDATORY-GROUPS { vdsl2LineGroup, vdsl2ChannelStatusGroup, vdsl2PrivSCStatusGroup, vdsl2DeltGroup, vdsl2LineInventoryGroup, vdsl2LineConfTemplateGroup, vdsl2LineConfProfGroup, vdsl2LineConfProfModeSpecGroup, vdsl2ChConfProfileGroup, vdsl2LineAlarmConfTemplateGroup, vdsl2PMLineCurrGroup, vdsl2PMLineCurrInitGroup, vdsl2PMLineHist15MinGroup, vdsl2PMLineHist1DayGroup, vdsl2PMLineInitHist15MinGroup, vdsl2PMLineInitHist1DayGroup, vdsl2PMChCurrGroup, vdsl2PMChHist15MinGroup, vdsl2PMChHist1DGroup } GROUP vdsl2ChannelStatusAtmGroup DESCRIPTION "The group of status objects required when the data path is ATM." GROUP vdsl2ChannelStatusPtmGroup DESCRIPTION "The group of status objects required when the data path is PTM." GROUP vdsl2LineConfProfRaGroup DESCRIPTION "The group of objects required for controlling the rate adaptive behavior of the line." GROUP vdsl2LineConfProfMsgMinGroup DESCRIPTION "The group of objects required for controlling the rate reserved for Overhead traffic." GROUP vdsl2LineAlarmConfProfileGroup DESCRIPTION "The group of objects that define the alarm thresholds on line level PM counters." GROUP vdsl2ChAlarmConfProfileGroup DESCRIPTION "The group of objects that define the alarm thresholds on channel level PM counters." GROUP vdsl2ChConfProfileAtmGroup DESCRIPTION "The group of configuration objects required when the data path is ATM." GROUP vdsl2ChConfProfileMinResGroup DESCRIPTION "The group of configuration objects required for the reserved data rate." GROUP vdsl2PMLineCurrInitShortGroup DESCRIPTION "The group of PM counters for the current intervals short initializations." GROUP vdsl2PMLineInitHist15MinShortGroup DESCRIPTION "The group of PM counters for the previous 15 minutes intervals short initializations." GROUP vdsl2PMLineInitHist1DayShortGroup DESCRIPTION "The group of PM counters for the previous 24 hours intervals short initializations." GROUP vdsl2ScalarDeltGroup DESCRIPTION "The group of objects that report the available memory resources for DELT processes." GROUP vdsl2ThreshNotificationGroup DESCRIPTION "The group of thresholds crossing notifications." GROUP vdsl2StatusChangeNotificationGroup DESCRIPTION "The group of status change notifications." ::= { vdsl2Compliances 1 } vdsl2LineGroup OBJECT-GROUP OBJECTS { vdsl2LineCnfgTemplate, vdsl2LineAlarmCnfgTemplate, vdsl2LineCmndConfPmsf, vdsl2LineCmndConfLdsf, vdsl2LineCmndConfLdsfFailReason, vdsl2LineCmndAutomodeColdStart, vdsl2LineStatusXtuTransSys, vdsl2LineStatusPwrMngState, vdsl2LineStatusInitResult, vdsl2LineStatusLastStateDs, vdsl2LineStatusLastStateUs, vdsl2LineStatusXtur, vdsl2LineStatusXtuc, vdsl2LineStatusLnAttenDs, vdsl2LineStatusLnAttenUs, vdsl2LineStatusSigAttenDs, vdsl2LineStatusSigAttenUs, vdsl2LineStatusSnrMarginDs, vdsl2LineStatusSnrMarginUs, vdsl2LineStatusAttainableRateDs, vdsl2LineStatusAttainableRateUs, vdsl2LineStatusActPsdDs, vdsl2LineStatusActPsdUs, vdsl2LineStatusActAtpDs, vdsl2LineStatusActAtpUs, vdsl2LineBandPlan, vdsl2LineCnfgServiceProf, vdsl2LineCnfgSpectrumProf, vdsl2LineCnfgDpboProf, vdsl2LineCnfgUpboProf, vdsl2LineCnfgNoiseMarginProf, vdsl2LineCnfgDelayINPProf, vdsl2UpboProfKl0CpeVal, vdsl2LineStatusCodingGainUs, vdsl2LineStatusCodingGainDs, vdsl2LineStatusPcbDs, hwvdslDlmDsmprofile, hwvdsl2LineActmode, vdsl2UpboProfKl0CoVal, vdsl2UpboRxThreshDs, vdsl2UpboRxThreshUs, hwvdsl2LineStatusLineRateDs, hwvdsl2LineStatusLineRateUs, hwvdsl2LineSplitterMode, hwvdsl2LineBackup, hwvdsl2LineBackupPort } STATUS current DESCRIPTION "The group of configuration, status, and commands objects on the line level. " ::= { vdsl2Groups 1 } vdsl2ChannelStatusGroup OBJECT-GROUP OBJECTS { vdsl2ChStatusChannelNum, vdsl2ChStatusActDataRate, vdsl2ChStatusPrevDataRate, vdsl2ChStatusActDelay } STATUS current DESCRIPTION "The group of status objects on the channel level." ::= { vdsl2Groups 2 } vdsl2ChannelStatusAtmGroup OBJECT-GROUP OBJECTS { vdsl2ChStatusAtmStatus } STATUS current DESCRIPTION "The group of status objects on the data path level when it is ATM." ::= { vdsl2Groups 3 } vdsl2ChannelStatusPtmGroup OBJECT-GROUP OBJECTS { vdsl2ChStatusPtmStatus } STATUS current DESCRIPTION "The group of status objects on the data path level when it is PTM." ::= { vdsl2Groups 4 } vdsl2PrivSCStatusGroup OBJECT-GROUP OBJECTS { vdsl2PrivSCStatusMtime, vdsl2PrivSCStatusSnr, vdsl2PrivSCStatusBitsAlloc, vdsl2PrivSCStatusGainAlloc } STATUS current DESCRIPTION "The group of status objects on the sub-carrier level. They are updated as a result of a DELT process." ::= { vdsl2Groups 5 } vdsl2DeltGroup OBJECT-GROUP OBJECTS { vdsl2SCStatusLinScale, vdsl2SCStatusLogMt, vdsl2SCStatusQlnMt, vdsl2SCStatusAttainableRate, vdsl2SCStatusActAtp, vdsl2SCStatusRowStatus } STATUS current DESCRIPTION "The group of status objects on the sub-carrier level. They are updated as a result of a DELT process." ::= { vdsl2Groups 6 } vdsl2LineInventoryGroup OBJECT-GROUP OBJECTS { vdsl2LInvG994VendorId, vdsl2LInvSystemVendorId, vdsl2LInvVersionNumber, vdsl2LInvSerialNumber, vdsl2LInvSelfTestResult, vdsl2LInvTransmissionCapabilities, vdsl2LInvModelId } STATUS current DESCRIPTION "The group of inventory objects per xTU." ::= { vdsl2Groups 7 } vdsl2LineConfTemplateGroup OBJECT-GROUP OBJECTS { vdsl2LConfTempLineProfile, vdsl2LConfTempChan1ConfProfile, vdsl2LConfTempChan1RaRatioDs, vdsl2LConfTempChan1RaRatioUs, vdsl2LConfTempChan2ConfProfile, vdsl2LConfTempChan2RaRatioDs, vdsl2LConfTempChan2RaRatioUs, vdsl2LConfTempChan3ConfProfile, vdsl2LConfTempChan3RaRatioDs, vdsl2LConfTempChan3RaRatioUs, vdsl2LConfTempChan4ConfProfile, vdsl2LConfTempChan4RaRatioDs, vdsl2LConfTempChan4RaRatioUs, vdsl2LConfTempRowStatus } STATUS current DESCRIPTION "The group of objects in a line configuration template." ::= { vdsl2Groups 8 } vdsl2LineConfProfGroup OBJECT-GROUP OBJECTS { vdsl2LConfProfScMaskDs, vdsl2LConfProfScMaskUs, vdsl2LConfProfRfiBands, vdsl2LConfProfVDSLtoneblackout, vdsl2LConfProfRaModeDs, vdsl2LConfProfRaModeUs, vdsl2LConfProfTargetSnrmDs, vdsl2LConfProfTargetSnrmUs, vdsl2LConfProfMaxSnrmDs, vdsl2LConfProfMaxSnrmUs, vdsl2LConfProfMinSnrmDs, vdsl2LConfProfMinSnrmUs, vdsl2LConfProfXtuTransSysEna, vdsl2LConfProfPmMode, vdsl2LConfProfL0Time, vdsl2LConfProfL2Time, vdsl2LConfProfL2Atpr, vdsl2LConfProfL2Atprt, vdsl2LConfProfDpboEpsd, vdsl2LConfProfDpboEsel, vdsl2LConfProfDpboEscm, vdsl2LConfProfDpboMus, vdsl2LConfProfDpboFmin, vdsl2LConfProfDpboFmax, vdsl2LConfProfUpboPsdBand, vdsl2LConfProfUpboKl, vdsl2LConfProfUpboKlf, vdsl2LConfProfBitSwapDs, vdsl2LConfProfBitSwapUs, vdsl2LConfProfRowStatus } STATUS current DESCRIPTION "The group of objects in a line configuration profile." ::= { vdsl2Groups 9 } vdsl2LineConfProfRaGroup OBJECT-GROUP OBJECTS { vdsl2LConfProfRaUsNrmDs, vdsl2LConfProfRaUsNrmUs, vdsl2LConfProfRaUsTimeDs, vdsl2LConfProfRaUsTimeUs, vdsl2LConfProfRaDsNrmsDs, vdsl2LConfProfRaDsNrmsUs, vdsl2LConfProfRaDsTimeDs, vdsl2LConfProfRaDsTimeUs } STATUS current DESCRIPTION "The group of objects required for controlling the rate adaptive behavior of the line." ::= { vdsl2Groups 10 } vdsl2LineConfProfMsgMinGroup OBJECT-GROUP OBJECTS { vdsl2LConfProfMsgMinUs, vdsl2LConfProfMsgMinDs } STATUS current DESCRIPTION "The group of objects required for controlling the rate reserved for Overhead traffic. " ::= { vdsl2Groups 11 } vdsl2LineConfProfModeSpecGroup OBJECT-GROUP OBJECTS { vdsl2LConfProfMaxNomPsdDs, vdsl2LConfProfMaxNomPsdUs, vdsl2LConfProfMaxNomAtpDs, vdsl2LConfProfMaxNomAtpUs, vdsl2LConfProfMaxAggRxPwrUs, vdsl2LConfProfPsdMaskDs, vdsl2LConfProfPsdMaskUs, vdsl2LConfProfPsdMaskSelectUs, vdsl2LConfProfModeSpecRowStatus, hwVdsl2ConfProfVirtualNoiseModeDs, hwVdsl2ConfProfVirtualNoiseModeUs, hwVdsl2ConfProfVirtualNoiseDs, hwVdsl2ConfProfVirtualNoiseUs, hwVdsl2ConfProfAutoProfile } STATUS current DESCRIPTION "The group of objects in a line configuration profile that have an instance for each operation mode allowed. " ::= { vdsl2Groups 12 } vdsl2ChConfProfileGroup OBJECT-GROUP OBJECTS { vdsl2ChConfProfMinDataRateDs, vdsl2ChConfProfMinDataRateUs, vdsl2ChConfProfMaxDataRateDs, vdsl2ChConfProfMaxDataRateUs, vdsl2ChConfProfMinDataRateLowPwrDs, vdsl2ChConfProfMinDataRateLowPwrUs, vdsl2ChConfProfMaxDelayDs, vdsl2ChConfProfMaxDelayUs, vdsl2ChConfProfMinProtectionDs, vdsl2ChConfProfMinProtectionUs, vdsl2ChConfProfMaxBerDs, vdsl2ChConfProfMaxBerUs, vdsl2ChConfProfUsDataRateDs, vdsl2ChConfProfDsDataRateDs, vdsl2ChConfProfUsDataRateUs, vdsl2ChConfProfDsDataRateUs, vdsl2ChConfProfRowStatus, vdsl2ChConfProfPhyRcontrolDs, vdsl2ChConfProfPhyRcontrolUs, vdsl2ChConfProfInpMaxDs, vdsl2ChConfProfInpMaxUs, vdsl2ChConfProfMinRtxRatioDs, vdsl2ChConfProfMinRtxRatioUs, vdsl2ChConfProfMinRSoverheadDs, vdsl2ChConfProfMinRSoverheadUs, vdsl2ChConfProfErasureDecoding, vdsl2ChConfProfMinSosBrDs, vdsl2ChConfProfMinSosBrUs , vdsl2ChConfProfMinEtrRtxDs , vdsl2ChConfProfMinEtrRtxUs , vdsl2ChConfProfMaxEtrRtxDs , vdsl2ChConfProfMaxEtrRtxUs , vdsl2ChConfProfMaxNdrRtxDs , vdsl2ChConfProfMaxNdrRtxUs , vdsl2ChConfProfMaxDelayRtxDs , vdsl2ChConfProfMaxDelayRtxUs , vdsl2ChConfProfMinDelayRtxDs , vdsl2ChConfProfMinDelayRtxUs , vdsl2ChConfProfMinInpShineRtxDs , vdsl2ChConfProfMinInpShineRtxUs , vdsl2ChConfProfMinInp8ShineRtxDs, vdsl2ChConfProfMinInp8ShineRtxUs, vdsl2ChConfProfShineRatioRtxDs , vdsl2ChConfProfShineRatioRtxUs , vdsl2ChConfProfMinInpReinRtxDs , vdsl2ChConfProfMinInpReinRtxUs , vdsl2ChConfProfMinInp8ReinRtxDs , vdsl2ChConfProfMinInp8ReinRtxUs , vdsl2ChConfProfIatReinRtxDs , vdsl2ChConfProfIatReinRtxUs } STATUS current DESCRIPTION "The group of objects in a channel configuration profile." ::= { vdsl2Groups 13 } vdsl2ChConfProfileAtmGroup OBJECT-GROUP OBJECTS { vdsl2ChConfProfImaEnabled, vdsl2ChStatusAtmStatus } STATUS current DESCRIPTION "The group of configuration objects required when the data path is ATM. " ::= { vdsl2Groups 14 } vdsl2ChConfProfileMinResGroup OBJECT-GROUP OBJECTS { vdsl2ChConfProfMinResDataRateDs, vdsl2ChConfProfMinResDataRateUs } STATUS current DESCRIPTION "The group of configuration objects required for the reserved data rate. " ::= { vdsl2Groups 15 } vdsl2LineAlarmConfTemplateGroup OBJECT-GROUP OBJECTS { vdsl2LAlarmConfTempLineProfile, vdsl2LAlarmConfTempChan1ConfProfile, vdsl2LAlarmConfTempChan2ConfProfile, vdsl2LAlarmConfTempChan3ConfProfile, vdsl2LAlarmConfTempChan4ConfProfile, vdsl2LAlarmConfTempRowStatus } STATUS current DESCRIPTION "The group of objects in a line alarm template. " ::= { vdsl2Groups 16 } vdsl2LineAlarmConfProfileGroup OBJECT-GROUP OBJECTS { vdsl2LineAlarmConfProfileXtucThresh15MinFecs, vdsl2LineAlarmConfProfileXtucThresh15MinEs, vdsl2LineAlarmConfProfileXtucThresh15MinSes, vdsl2LineAlarmConfProfileXtucThresh15MinLoss, vdsl2LineAlarmConfProfileXtucThresh15MinUas, vdsl2LineAlarmConfProfileXturThresh15MinFecs, vdsl2LineAlarmConfProfileXturThresh15MinEs, vdsl2LineAlarmConfProfileXturThresh15MinSes, vdsl2LineAlarmConfProfileXturThresh15MinLoss, vdsl2LineAlarmConfProfileXturThresh15MinUas, vdsl2LineAlarmConfProfileThresh15MinFailedFullInt, vdsl2LineAlarmConfProfileThresh15MinFailedShrtInt, vdsl2LineAlarmConfProfileRowStatus, vdsl2LineAlarmConfProfileThresh15MinFullInt, vdsl2LineAlarmConfProfileXtucThresh15MinLeftrs, vdsl2LineAlarmConfProfileXturThresh15MinLeftrs } STATUS current DESCRIPTION "The group of objects in a line alarm profile." ::= { vdsl2Groups 17 } vdsl2ChAlarmConfProfileGroup OBJECT-GROUP OBJECTS { vdsl2ChAlarmConfProfileXtucThresh15MinCodingViolations, vdsl2ChAlarmConfProfileXtucThresh15MinCorrected, vdsl2ChAlarmConfProfileXturThresh15MinCodingViolations, vdsl2ChAlarmConfProfileXturThresh15MinCorrected, vdsl2ChAlarmConfProfileMonitoringRateDs, vdsl2ChAlarmConfProfileMonitoringRateUs, vdsl2ChAlarmConfProfileRowStatus } STATUS current DESCRIPTION "The group of objects in a channel alarm profile." ::= { vdsl2Groups 18 } vdsl2PMLineCurrGroup OBJECT-GROUP OBJECTS { vdsl2PMLCurrValidIntervals, vdsl2PMLCurrInvalidIntervals, vdsl2PMLCurr15MTimeElapsed, vdsl2PMLCurr15MFecs, vdsl2PMLCurr15MEs, vdsl2PMLCurr15MSes, vdsl2PMLCurr15MLoss, vdsl2PMLCurr15MUas, vdsl2PMLCurr1DayValidIntervals, vdsl2PMLCurr1DayInvalidIntervals, vdsl2PMLCurr1DayTimeElapsed, vdsl2PMLCurr1DayFecs, vdsl2PMLCurr1DayEs, vdsl2PMLCurr1DaySes, vdsl2PMLCurr1DayLoss, vdsl2PMLCurr1DayUas, vdsl2PMLEverBeforeFecs, vdsl2PMLEverBeforeEs, vdsl2PMLEverBeforeSes, vdsl2PMLEverBeforeLoss, vdsl2PMLEverBeforeUas } STATUS current DESCRIPTION "The group of objects that report the line level counters for current PM intervals. " ::= { vdsl2Groups 19 } vdsl2PMLineCurrInitGroup OBJECT-GROUP OBJECTS { vdsl2PMLCurrInit15MTimeElapsed, vdsl2PMLCurrInit15MFullInits, vdsl2PMLCurrInit15MFailedFullInits, vdsl2PMLCurrInit1DayTimeElapsed, vdsl2PMLCurrInit1DayFullInits, vdsl2PMLCurrInit1DayFailedFullInits, vdsl2PMLInitEverBeforeFullInits, vdsl2PMLInitEverBeforeFailedFullInits } STATUS current DESCRIPTION "The group of objects that report the full initializations counters for current PM intervals. " ::= { vdsl2Groups 20 } vdsl2PMLineCurrInitShortGroup OBJECT-GROUP OBJECTS { vdsl2PMLCurrInit15MShortInits, vdsl2PMLCurrInit15MFailedShortInits, vdsl2PMLCurrInit1DayShortInits, vdsl2PMLCurrInit1DayFailedShortInits, vdsl2PMLInitEverBeforeShortInits, vdsl2PMLInitEverBeforeFailedShortInits } STATUS current DESCRIPTION "The group of objects that report the short initializations counters for current PM intervals. " ::= { vdsl2Groups 21 } vdsl2PMLineHist15MinGroup OBJECT-GROUP OBJECTS { vdsl2PMLHist15MMonitoredTime, vdsl2PMLHist15MFecs, vdsl2PMLHist15MEs, vdsl2PMLHist15MSes, vdsl2PMLHist15MLoss, vdsl2PMLHist15MUas, vdsl2PMLHist15MValidInterval } STATUS current DESCRIPTION "The group of line level PM counters for the previous 15 minutes intervals. " ::= { vdsl2Groups 22 } vdsl2PMLineHist1DayGroup OBJECT-GROUP OBJECTS { vdsl2PMLHist1DMonitoredTime, vdsl2PMLHist1DFecs, vdsl2PMLHist1DEs, vdsl2PMLHist1DSes, vdsl2PMLHist1DLoss, vdsl2PMLHist1DUas, vdsl2PMLHist1DValidInterval } STATUS current DESCRIPTION "The group of line level PM counters for the previous 24 hours intervals. " ::= { vdsl2Groups 23 } vdsl2PMLineInitHist15MinGroup OBJECT-GROUP OBJECTS { vdsl2PMLHistInit15MMonitoredTime, vdsl2PMLHistInit15MFullInits, vdsl2PMLHistInit15MFailedFullInits, vdsl2PMLHistInit15MValidInterval } STATUS current DESCRIPTION "The group of PM counters for the previous 15 minutes intervals full initializations. " ::= { vdsl2Groups 24 } vdsl2PMLineInitHist15MinShortGroup OBJECT-GROUP OBJECTS { vdsl2PMLHistInit15MShortInits, vdsl2PMLHistInit15MFailedShortInits } STATUS current DESCRIPTION "The group of PM counters for the previous 15 minutes intervals short initializations. " ::= { vdsl2Groups 25 } vdsl2PMLineInitHist1DayGroup OBJECT-GROUP OBJECTS { vdsl2PMLHistinit1DMonitoredTime, vdsl2PMLHistinit1DFullInits, vdsl2PMLHistinit1DFailedFullInits, vdsl2PMLHistinit1DValidInterval } STATUS current DESCRIPTION "The group of PM counters for the previous 24 hours intervals full initializations. " ::= { vdsl2Groups 26 } vdsl2PMLineInitHist1DayShortGroup OBJECT-GROUP OBJECTS { vdsl2PMLHistinit1DShortInits, vdsl2PMLHistinit1DFailedShortInits } STATUS current DESCRIPTION "The group of PM counters for the previous 24 hours intervals short initializations. " ::= { vdsl2Groups 27 } vdsl2PMChCurrGroup OBJECT-GROUP OBJECTS { vdsl2PMChCurrValidIntervals, vdsl2PMChCurrInvalidIntervals, vdsl2PMChCurr15MTimeElapsed, vdsl2PMChCurr15MCodingViolations, vdsl2PMChCurr15MCorrectedBlocks, vdsl2PMChCurr1DayValidIntervals, vdsl2PMChCurr1DayInvalidIntervals, vdsl2PMChCurr1DayTimeElapsed, vdsl2PMChCurr1DayCodingViolations, vdsl2PMChCurr1DayCorrectedBlocks, vdsl2PMChEverBeforeCodingViolations, vdsl2PMChEverBeforeCorrectedBlocks } STATUS current DESCRIPTION "The group of objects that report the channel level counters for current PM intervals. " ::= { vdsl2Groups 28 } vdsl2PMChHist15MinGroup OBJECT-GROUP OBJECTS { vdsl2PMChHist15MMonitoredTime, vdsl2PMChHist15MCodingViolations, vdsl2PMChHist15MCorrectedBlocks, vdsl2PMChHist15MValidInterval } STATUS current DESCRIPTION "The group of objects that report the channel level counters for previous 15 minutes PM intervals. " ::= { vdsl2Groups 29 } vdsl2PMChHist1DGroup OBJECT-GROUP OBJECTS { vdsl2PMChHist1DMonitoredTime, vdsl2PMChHist1DCodingViolations, vdsl2PMChHist1DCorrectedBlocks, vdsl2PMChHist1DValidInterval } STATUS current DESCRIPTION "The group of objects that report the channel level counters for previous 24 hours PM intervals. " ::= { vdsl2Groups 30 } vdsl2ScalarDeltGroup OBJECT-GROUP OBJECTS { vdsl2ScalarSCMaxInterfaces, vdsl2ScalarSCAvailInterfaces } STATUS current DESCRIPTION "The group of objects that report the available memory resources for DELT processes. " ::= { vdsl2Groups 31 } vdsl2ThreshNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { vdsl2LinePerfFECSThreshXtuc, vdsl2LinePerfFECSThreshXtur, vdsl2LinePerfESThreshXtuc, vdsl2LinePerfESThreshXtur, vdsl2LinePerfSESThreshXtuc, vdsl2LinePerfSESThreshXtur, vdsl2LinePerfLOSSThreshXtuc, vdsl2LinePerfLOSSThreshXtur, vdsl2LinePerfUASThreshXtuc, vdsl2LinePerfUASThreshXtur, vdsl2LinePerfCodingViolationsThreshXtuc, vdsl2LinePerfCodingViolationsThreshXtur, vdsl2LinePerfCorrectedThreshXtuc, vdsl2LinePerfCorrectedThreshXtur, vdsl2LinePerfFailedFullInitThresh, vdsl2LinePerfFailedShortInitThresh, vdsl2LinePerfFullInitThresh } STATUS current DESCRIPTION "This notification indicates alarm when this group supports notifications of significant conditions associated with VDSL2 lines. " ::= { vdsl2Groups 32 } vdsl2StatusChangeNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { vdsl2LineStatusChangeXtuc, vdsl2LineStatusChangeXtur } STATUS current DESCRIPTION "This notification indicates alarm when this group supports notifications of thresholds crossing associated with VDSL2 lines. " ::= { vdsl2Groups 33 } -- mode information hwvdslmodecfg OBJECT-TYPE SYNTAX Vdsl2CfgMode MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to change VDSL management mode. After the mode being changed, system will automatically save data and reboot. " ::= { vdsl2Mode 1 } -- VDSL DPBO ESEL vdsl2DpboEselGlobalConfigSwitch OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable VDSL port DPBOESEL shall Feature. This object is defaulted disabled(2). Options: 1. enabled(1) - enabled the switch 2. disabled(2) - disabled the switch " ::= { vdsl2GlobalConfig 1 } vdsl2DpboEselGlobalConfigValue OBJECT-TYPE SYNTAX Unsigned32 (0..511) UNITS "0.5dB" MAX-ACCESS read-write STATUS current DESCRIPTION "This configuration parameter defines the assumed electrical length of cables (E-side cables) connecting exchange based DSL services to a remote flexibility point (cabinet), that hosts the xTU-C that is subject to spectrally shaped downstream power back-off depending on this length. For this parameter the electrical length is defined as the loss (in dB) of an equivalent length of hypothetical cable at a reference frequency defined by the network operator or in spectrum management regulations. DPBOESEL shall be coded as an unsigned integer representing an electrical length from 0 dB (coded as 0) to 255.5 dB (coded as 511) in steps of 0.5 dB. All values in the range are valid.If DPBOESEL is set to zero, the DPBO in this section shall be disabled. This object is defaulted 84. Unit: 0.5dB " REFERENCE "ITU-T G.997.1(200604), paragraph 7.3.1.2.13" ::= { vdsl2GlobalConfig 2 } vdsl2ProfileAutoNegotiationSwitch OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable the VDSL2 G993.2 profile auto-negotiation function. Default values:disabled(2). Options: 1. enabled(1) - enabled the switch 2. disabled(2) - disabled the switch " ::= { vdsl2GlobalConfig 3 } vdsl2MaximumInterleavedDepth OBJECT-TYPE SYNTAX INTEGER { maxInterleavedDepth64(1), maxInterleavedDepth511(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Set the VDSL2 maximum interleaved depth function. Default values:maxInterleavedDepth511(2). Options: 1. maxInterleavedDepth64(1) - it means the interleaving depth up to 64 can be selected 2. maxInterleavedDepth511(2) - it means the interleaving depth up to 512 can be selected " ::= { vdsl2GlobalConfig 4 } -- VDSL auto delete profile unused hwvdsl2AutoDeleteProfUnusedProfType OBJECT-TYPE SYNTAX INTEGER { vdsl2LineConfTemplate(1), vdsl2LineConfProf(2), vdsl2ChConfProfile(3), vdsl2LineAlarmConfTemplate(4), vdsl2LineAlarmConfProfile(5), vdsl2ChAlarmConfProfile(6), vdsl2ServProf(7), vdsl2SpectrumProf(8), vdsl2DpboProf(9), vdsl2UpboProf(10), vdsl2NoiseMarginProf(11), vdsl2DelayInpProf(12), vopDataRateConfProf(13), vopLineSpectrumConfProf(14), vopUPBOConfProf(15), vopDPBOConfProf(16), vopRFIConfProf(17), vopSNRMarginConfProf(18), vopINPDelayConfProf(19), vopVirtualNoiseConfProf(20), vopModeSpecificPSDConfProf(21) } MAX-ACCESS read-write STATUS current DESCRIPTION "The profile type of deleting unused VDSL profile. Options: 1. vdsl2LineConfTemplate(1) - VDSL2 line template 2. vdsl2LineConfProf(2) - VDSL2 line profile 3. vdsl2ChConfProfile(3) - VDSL2 channel profile 4. vdsl2LineAlarmConfTemplate(4) - VDSL2 alarm template 5. vdsl2LineAlarmConfProfile(5) - VDSL2 alarm profile 6. vdsl2ChAlarmConfProfile(6) - VDSL2 channel alarm profile 7. vdsl2ServProf(7) - VDSL2 service profile 8. vdsl2SpectrumProf(8) - VDSL2 spectrum profile 9. vdsl2DpboProf(9) - VDSL2 dpbo profile 10. vdsl2UpboProf(10) - VDSL2 upbo profile 11. vdsl2NoiseMarginProf(11) - VDSL2 noise-margin profile 12. vdsl2DelayInpProf(12) - VDSL2 inp-delay profile 13. vopDataRateConfProf(13) - XDSL data rate profile 14. vopLineSpectrumConfProf(14) - XDSL line spectrum profile 15. vopUPBOConfProf(15) - XDSL upbo profile 16. vopDPBOConfProf(16) - XDSL dpbo profile 17. vopRFIConfProf(17) - XDSL rfi profile 18. vopSNRMarginConfProf(18) - XDSL noise-margin profile 19. vopINPDelayConfProf(19) - XDSL inp-delay profile 20. vopVirtualNoiseConfProf(20) - XDSL virtual noise profile 21. vopModeSpecificPSDConfProf(21) - XDSL PSD profile " ::= { hwvdsl2AutoDeleteProfUnused 1 } hwvdsl2AutoDeleteProfUnusedOperType OBJECT-TYPE SYNTAX INTEGER { first(1), all(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The operation type of deleting unused VDSL profile. This object is defaulted all(2). Options: 1. first(1) - Delete first profile 2. all(2) - Delete all profile " ::= { hwvdsl2AutoDeleteProfUnused 2 } -- hwvdsl2TrapsVbOids hwvdsl2LinePMThresholdItem OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..1024)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Indicate the threshold item." ::= { hwvdsl2TrapsVbOids 1 } hwvdsl2LinePMThresholdValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "VDSL threshold value" ::= { hwvdsl2TrapsVbOids 2 } hwvdsl2PortActFailReason OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..1024)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Indicate the the reason of the active port fail." ::= { hwvdsl2TrapsVbOids 3 } hwvdsl2ChPMThresholdItem OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..1024)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Indicate the threshold value of threshold item ." ::= { hwvdsl2TrapsVbOids 4 } hwvdsl2ChPMCurrentValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Indicate the current value of threshold item." ::= { hwvdsl2TrapsVbOids 5 } hwvdsl2ChPMThresholdValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Indicate the threshold value of threshold item." ::= { hwvdsl2TrapsVbOids 6 } hwvdsl2LineActRateUs OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Indicate the line active data rate in the upstream direction. " ::= { hwvdsl2TrapsVbOids 7 } hwvdsl2LineActRateDs OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Indicate the line active data rate in the downstream direction. " ::= { hwvdsl2TrapsVbOids 8 } hwvdsl2ChipsetID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "ChipsetID, the chipset id of the board." ::= { hwvdsl2TrapsVbOids 9 } hwvdsl2ModeSwitchResult OBJECT-TYPE SYNTAX INTEGER { success(0), fail(1) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "VDSL mode switch result. Options: 1. success(0) - success 2. fail(1) - fail " ::= { hwvdsl2TrapsVbOids 10 } hwvdsl2LinePMCurrentValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Indicate the current value of threshold item." ::= { hwvdsl2TrapsVbOids 11 } hwVdsl2RequestID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Request ID" ::= { hwvdsl2TrapsVbOids 12 } hwACTChngeDesc OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..256)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The VDSL port actived rate change description." ::= { hwvdsl2TrapsVbOids 13 } hwVdsl2TemplateType OBJECT-TYPE SYNTAX INTEGER { lineConfTemplate(1), alarmConfTemplate(2), spectrumProf(3), dpboProf(4), upboProf(5), serviceProf(6), noiseMarginProf(7), delayInpProf(8) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Type of the VDSL template ID. Options: 1. lineConfTemplate(1) - VDSL2 line template 2. alarmConfTemplate(2) - VDSL2 alarm template 3. spectrumProf(3) - VDSL2 spectrum profile 4. dpboProf(4) - VDSL2 dpbo profile 5. upboProf(5) - VDSL2 upbo profile 6. serviceProf(6) - VDSL2 service profile 7. noiseMarginProf(7) - VDSL2 noise-margin profile 8. delayInpProf(8) - VDSL2 delay-inp profile " ::= { hwvdsl2TrapsVbOids 14 } hwvdsl2ProfOperType OBJECT-TYPE SYNTAX INTEGER { add(1), modify(2), delete(3) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "VDSL profile operate type. Options: 1.add(1) - Add a VDSL profile 2.modify(2) - Modify a VDSL profile 3.delete(3) - Delete a VDSL profile " ::= { hwvdsl2TrapsVbOids 15 } -- VDSL TRAP hwvdsl2ModeSwitchTrap NOTIFICATION-TYPE OBJECTS { hwvdsl2ModeSwitchResult } STATUS current DESCRIPTION "VDSL mode switch trap. This trap message is generated when the VDSL line mode fails to be switched. " ::= { hwvdsl2CommonTraps 0 1 } hwvdsl2CurrentModeTrap NOTIFICATION-TYPE OBJECTS { hwvdslmodecfg } STATUS current DESCRIPTION "VDSL current mode trap. This trap message is generated when the current mode of the VDSL line is reported to the NMS periodically. " ::= { hwvdsl2CommonTraps 0 2 } hwvdsl2PortStatusChangeTrap NOTIFICATION-TYPE OBJECTS { hwFrameIndex, hwSlotIndex, hwPortIndex, hwPortOperStatus, hwPortPrimaryStatus, hwPortSecondaryStatus } STATUS current DESCRIPTION "VDSL port status change trap. This trap message is generated when the port status changes, for example from up to down or from down to up.The parameter information about the trap message describes the current status of the link and the location where the trap message is generated." ::= { hwvdsl2CommonTraps 0 3 } hwvdsl2DeltOperResultTrap NOTIFICATION-TYPE OBJECTS { hwVdsl2RequestID, vdsl2LineCmndConfLdsfFailReason, ifIndex } STATUS current DESCRIPTION "VDSL delt trap. This trap message is generated when the result of the DELT performed on the VDSL line is reported. " ::= { hwvdsl2CommonTraps 0 4 } hwvdsl2TemplateIDChangeTrap NOTIFICATION-TYPE OBJECTS { hwConfigChangeIP, hwVdsl2TemplateType, ifIndex, hwXdslProfName } STATUS current DESCRIPTION "VDSL template change trap. This trap message is generated when the VDSL templete changed. " ::= { hwvdsl2CommonTraps 0 5 } hwvdsl2LConfTempTemplateChangeTrap NOTIFICATION-TYPE OBJECTS { hwConfigChangeIP, hwvdsl2ProfOperType, vdsl2LConfTempTemplateName } STATUS current DESCRIPTION "VDSL line template change trap. This trap message is generated when the VDSL line template changed. " ::= { hwvdsl2CommonTraps 0 6 } hwvdsl2LConfProfProfileChangeTrap NOTIFICATION-TYPE OBJECTS { hwConfigChangeIP, hwvdsl2ProfOperType, vdsl2LConfProfProfileName } STATUS current DESCRIPTION "VDSL line profile change trap. This trap message is generated when the VDSL line profile changed. " ::= { hwvdsl2CommonTraps 0 7 } hwvdsl2ChConfProfProfileChangeTrap NOTIFICATION-TYPE OBJECTS { hwConfigChangeIP, hwvdsl2ProfOperType, vdsl2ChConfProfProfileName } STATUS current DESCRIPTION "VDSL channel profile change trap. This trap message is generated when the VDSL channel profile changed. " ::= { hwvdsl2CommonTraps 0 8 } -- VDSL ALARM hwvdsl2AutoDeactivateLackLicensesAlarmTrap NOTIFICATION-TYPE OBJECTS { hwFrameIndex, hwSlotIndex } STATUS current DESCRIPTION "This trap message is generated when some xDSL ports or all the xDSL ports are automatically deactivated due to lack of licenses. " ::= { hwvdsl2AlarmTraps 0 1 } hwvdsl2PortAutoDeactiveLineFaultAlarmTrap NOTIFICATION-TYPE OBJECTS { hwFrameIndex, hwSlotIndex, hwPortIndex } STATUS current DESCRIPTION "This trap message is generated when the VDSL port is automatically deactivated due to the line fault." ::= { hwvdsl2AlarmTraps 0 2 } hwvdsl2PortReactiveAfterRecoverAlarmTrap NOTIFICATION-TYPE OBJECTS { hwFrameIndex, hwSlotIndex, hwPortIndex } STATUS current DESCRIPTION "This trap message is generated when the VDSL port is re-activated after the VDSL line recovers." ::= { hwvdsl2AlarmTraps 0 3 } hwvdsl2PerformanceStatiReachThresholdAlarmTrap NOTIFICATION-TYPE OBJECTS { hwFrameIndex, hwSlotIndex, hwPortIndex, hwvdsl2LinePMThresholdItem, hwvdsl2LinePMCurrentValue, hwvdsl2LinePMThresholdValue } STATUS current DESCRIPTION "This trap message is generated when the line performance statistics of the VDSL port reach the threshold." ::= { hwvdsl2AlarmTraps 0 4 } hwvdsl2DownstreamRateLowerThresholdAlarmTrap NOTIFICATION-TYPE OBJECTS { hwFrameIndex, hwSlotIndex, hwPortIndex, vdsl2ChStatusChannelNum, vdsl2ChStatusActDataRate } STATUS current DESCRIPTION "This trap message is generated when the xDSL channel downstream rate is lower than the threshold." ::= { hwvdsl2AlarmTraps 0 5 } hwvdsl2ActivePortFailConfigParaAlarmTrap NOTIFICATION-TYPE OBJECTS { hwFrameIndex, hwSlotIndex, hwPortIndex, hwvdsl2PortActFailReason } STATUS current DESCRIPTION "This trap message is generated when it fails to activate the port by using the VDSL line configuration parameters." ::= { hwvdsl2AlarmTraps 0 6 } hwvdsl2PerformanceStatisReachThresholdAlarmTrap NOTIFICATION-TYPE OBJECTS { hwFrameIndex, hwSlotIndex, hwPortIndex, vdsl2ChStatusChannelNum, hwvdsl2ChPMThresholdItem, hwvdsl2ChPMThresholdValue, hwvdsl2ChPMCurrentValue } STATUS current DESCRIPTION "This trap message is generated when the channel performance statistics of the VDSL port reach the threshold." ::= { hwvdsl2AlarmTraps 0 7 } hwvdsl2ChannelUpstreamLowerThresholdAlarmTrap NOTIFICATION-TYPE OBJECTS { hwFrameIndex, hwSlotIndex, hwPortIndex, vdsl2ChStatusChannelNum, vdsl2ChStatusActDataRate } STATUS current DESCRIPTION "This trap message is generated when the xDSL channel upstream rate is lower than the threshold." ::= { hwvdsl2AlarmTraps 0 8 } hwvdsl2VTURPowerOffAlarmTrap NOTIFICATION-TYPE OBJECTS { hwFrameIndex, hwSlotIndex, hwPortIndex } STATUS current DESCRIPTION "This trap message is generated when the VTU-R is powered off." ::= { hwvdsl2AlarmTraps 0 9 } hwvdsl2PortActiveRateChangeAlarmTrap NOTIFICATION-TYPE OBJECTS { hwFrameIndex, hwSlotIndex, hwPortIndex, hwvdsl2LineActRateUs, hwvdsl2LineActRateDs, hwACTChngeDesc } STATUS current DESCRIPTION "This trap message is generated when the VDSL port actived rate change." ::= { hwvdsl2AlarmTraps 0 10 } hwvdsl2ChipsetUnavailableAlarmTrap NOTIFICATION-TYPE OBJECTS { hwFrameIndex, hwSlotIndex, hwvdsl2ChipsetID } STATUS current DESCRIPTION "This trap message is generated when the VDSL chipset is unavailable." ::= { hwvdsl2AlarmTraps 0 11 } hwvdsl2ChipsetRecoverAlarmTrap NOTIFICATION-TYPE OBJECTS { hwFrameIndex, hwSlotIndex, hwvdsl2ChipsetID } STATUS current DESCRIPTION "This trap message is generated when the VDSL chipset recovers from unavailability." ::= { hwvdsl2AlarmTraps 0 12 } hwvdsl2ChannelUpstreamExcThreAlarmTrap NOTIFICATION-TYPE OBJECTS { hwFrameIndex, hwSlotIndex, hwPortIndex, vdsl2ChStatusActDataRate } STATUS current DESCRIPTION "This trap message is generated when the xDSL channel upstream rate increases to a value higher than the threshold." ::= { hwvdsl2AlarmTraps 0 13 } hwvdsl2ChannelUpstreamRestoreThreAlarmTrap NOTIFICATION-TYPE OBJECTS { hwFrameIndex, hwSlotIndex, hwPortIndex, vdsl2ChStatusActDataRate } STATUS current DESCRIPTION "This trap message is generated when the xDSL channel upstream rate decreases to a value lower than the threshold." ::= { hwvdsl2AlarmTraps 0 14 } hwvdsl2ChannelDownstreamExcThreAlarmTrap NOTIFICATION-TYPE OBJECTS { hwFrameIndex, hwSlotIndex, hwPortIndex, vdsl2ChStatusActDataRate } STATUS current DESCRIPTION "This trap message is generated when the xDSL channel downstream rate increases to a value higher than the threshold." ::= { hwvdsl2AlarmTraps 0 15 } hwvdsl2ChannelDownstreamRestoreThreAlarmTrap NOTIFICATION-TYPE OBJECTS { hwFrameIndex, hwSlotIndex, hwPortIndex, vdsl2ChStatusActDataRate } STATUS current DESCRIPTION "This trap message is generated when the xDSL channel downstream rate decreases to a value lower than the threshold." ::= { hwvdsl2AlarmTraps 0 16 } hwvdsl2UnSuppVectorPortActFailAlarmTrap NOTIFICATION-TYPE OBJECTS { hwFrameIndex, hwSlotIndex, hwPortIndex } STATUS current DESCRIPTION "When the CPE connected to the port does not support vectoring and cannot be activated in 993.2 mode, this trap is sent." ::= { hwvdsl2AlarmTraps 0 17 } END