-- ================================================================================================== -- Copyright (C) 2019 by HUAWEI TECHNOLOGIES. All rights reserved. -- Description: The mib is used for defining the RSTP MIB object. -- RSTP is used to check the ring network on the user side to prevent -- the services from being affected. -- After that, the system checks the ring network on the user side automatically. -- Reference: -- Version: V3.15 -- =================================================================================================== HUAWEI-RSTP-EXT-MIB DEFINITIONS ::= BEGIN IMPORTS dot1dStpPortEntry FROM BRIDGE-MIB huaweiMgmt FROM HUAWEI-MIB Counter32, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE, Integer32, Unsigned32 FROM SNMPv2-SMI MacAddress, TruthValue, TEXTUAL-CONVENTION, DateAndTime FROM SNMPv2-TC InterfaceIndex FROM IF-MIB hwFrameIndex, hwSlotIndex, hwPortIndex, hwOntIndex FROM HUAWEI-DEVICE-MIB; hwRstpExt MODULE-IDENTITY LAST-UPDATED "201903130000Z" ORGANIZATION "Huawei Technologies Co.,Ltd." CONTACT-INFO "Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China Website: http://www.huawei.com Email: support@huawei.com " DESCRIPTION "The mib is used for defining the RSTP MIB object. RSTP is used to check the ring network on the user side to prevent the services from being affected. After that, the system checks the ring network on the user side automatically." -- Revision history REVISION "201903130000Z" DESCRIPTION "V3.15, modified the description of hwRingCheckOnuSingleTestStartTime and hwRingCheckOnuSingleTestStopTime." REVISION "201903110000Z" DESCRIPTION "V3.14, modified the description of hwRingCheckOnuSingleTestStartTime and hwRingCheckOnuSingleTestStopTime." REVISION "201801200000Z" DESCRIPTION "V3.13, added hwRingCheckOnuSingleTestOperate in hwRstpMibObject. Added hwRingCheckOnuSingleTestOvertime in hwRstpMibObject. Added hwRingCheckOnuSingleTestStartTime in hwRstpMibObject. Added hwRingCheckOnuSingleTestStopTime in hwRstpMibObject. Added hwRingCheckOnuSingleTestTargetType in hwRstpMibObject. Added hwRingCheckOnuSingleTestTargetSlot in hwRstpMibObject. Added hwRingCheckOnuSingleTestReportTable in hwRstpMibObject." REVISION "201509240000Z" DESCRIPTION "V3.12, added hwRingCheckUplinkDetectionControl in hwRstpMibObject. Added hwRingCheckCascadeDetectionControl in hwRstpMibObject." REVISION "201412230000Z" DESCRIPTION "V3.11, modified the description of hwRingCheckRecordOntIndex." REVISION "201406100000Z" DESCRIPTION "V3.10, modified the enumerate of hwRingCheckModeStatus." REVISION "201209170000Z" DESCRIPTION "V3.09, added hwRingCheckTrapNotify in hwRstpMibObject. Add hwRingCheckPortRingWarningTrap in hwRingCheckAlarmTraps." REVISION "201103040000Z" DESCRIPTION "V3.08, added hwRingCheckRecordTable in hwRstpMibObject. Added hwRingCheckResumeInterval in hwRstpMibObject." REVISION "201011200000Z" DESCRIPTION "V3.07, added hwCnuIndex and hwRingCheckEocPortRingTrap for the ring topology in the subscriber EoC port, modified the descriptions of this MIB file and leaves." REVISION "201007160000Z" DESCRIPTION "V3.06, modified the description." REVISION "201006201630Z" DESCRIPTION "V3.05, deleted the Chinese characters in this file." REVISION "201004131630Z" DESCRIPTION "V3.04, modified description of hwRingCheckAdminStatus and hwRingCheckPrivateEthtype." REVISION "200912301630Z" DESCRIPTION "V3.03, added hwRingCheckTrapsVbOids in hwRstpExt. Added hwRingCheckTraps in hwRstpExt. Added hwRingCheckAlarmTraps in hwRingCheckTraps." REVISION "200804290000Z" DESCRIPTION "V3.02, added hwRingCheckModeStatus, hwRingCheckPrivateEthtype, hwRingCheckModeStatus used for setting ring check mode, and hwRingCheckPrivateEthtype used for setting the private ethtype of ring check packet." REVISION "200611270000Z" DESCRIPTION "V3.01, modified according to MIB rules." REVISION "200304280900Z" DESCRIPTION "V3.00, added IPR decriptions and updated all MIB version" REVISION "200211290000Z" DESCRIPTION "V2.00, reunification version based on the fix-net MIBs baseline by the MIB standard community." ::= { huaweiMgmt 21 } EnabledStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION " A simple status value for the object. " SYNTAX INTEGER { enabled(1), disabled(2) } hwRstpMibObject OBJECT IDENTIFIER ::= { hwRstpExt 1 } hwdot1dStpAdminStatus OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION " Enabling/Disabling Spanning Tree of the Switch Options: 1. enabled(1) 2. disabled(2) Default: disabled(2) " ::= { hwRstpMibObject 1 } hwdot1dStpForceVersion OBJECT-TYPE SYNTAX INTEGER { stp(0), rstp(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Configuring RSTP Operating Mode, RSTP is compatible with STP. If a bridge running STP is in this switched network, this can be used to set RSTP to work in STP compatible mode or RSTP compatible mode. DEFVAL { 2 } Options: 1. stp(0) -indicates the configuring RSTP operating mode is stp 2. rstp(2) -indicates the configuring RSTP operating mode is rstp " ::= { hwRstpMibObject 2 } hwdot1dStpDiameter OBJECT-TYPE SYNTAX Integer32 (1..7) MAX-ACCESS read-write STATUS current DESCRIPTION " Configuring Diameter of the Switched Network, Switched network is a loop-free tree structure in which any two PCs are connected by a series of bridges. Network diameter refers to the path with the most bridges. It is denoted by the number of bridges on the path. " ::= { hwRstpMibObject 3 } hwdot1dStpRootBridgeAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION " MAC Address of the root bridge. " ::= { hwRstpMibObject 4 } hwdot1dStpPortXTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDot1dStpPortXEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table describes rstp port expand table, The index of this table is is not supported. " ::= { hwRstpMibObject 5 } hwdot1dStpPortXEntry OBJECT-TYPE SYNTAX HwDot1dStpPortXEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table describes rstp port expand table, The index of this entry is is not supported. " AUGMENTS { dot1dStpPortEntry } ::= { hwdot1dStpPortXTable 1 } HwDot1dStpPortXEntry ::= SEQUENCE { hwdot1dStpPortAdminStatus EnabledStatus, hwdot1dStpPortEdgeport TruthValue, hwdot1dStpPortPointToPoint INTEGER, hwdot1dStpMcheck TruthValue, hwdot1dStpTransLimit Integer32, hwdot1dSetStpDefaultPortCost INTEGER } hwdot1dStpPortAdminStatus OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION " Enabling/Disabling Spanning Tree on the Port The spanning tree can be disabled on specified Ethernet port to forbid these ports participating in spanning tree calculation. " DEFVAL { 1 } ::= { hwdot1dStpPortXEntry 1 } hwdot1dStpPortEdgeport OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION " Configuring specified port to be EdgePort, If the current Ethernet port is not connected with any Ethernet port of other bridges, this port should be configured as EdgePort to enable it to enter forwarding state directly without the unnecessary transition. If the specified port that is connected with the port of other bridges, RSTP will automatically detect and reconfigure it as non-EdgePort " DEFVAL { 2 } ::= { hwdot1dStpPortXEntry 2 } hwdot1dStpPortPointToPoint OBJECT-TYPE SYNTAX INTEGER { forceTrue(1), forceFalse(2), auto(3) } MAX-ACCESS read-write STATUS current DESCRIPTION " Configuring the Port to Connect Point-to-Point Link, The two ports connected via the Point-to-Point link can enter the forwarding state rapidly by transmitting synchronous packets, so that unnecessary forwarding delay can be avoided. If the configuration mode for this parameter is set to auto, RSTP can automatically detect if the current Ethernet port is connected with Point-to-Point link. Options: 1. forceTrue(1) -indicates the configuration of the port to connect Point-to-Point link is forceTrue 2. forceFalse(2) -indicates the configuration of the port to connect Point-to-Point link is forceFalse 3. auto(3) -indicates the configuration of the port to connect Point-to-Point link is auto " DEFVAL { auto } ::= { hwdot1dStpPortXEntry 3 } hwdot1dStpMcheck OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION " Configuring mCheck of Specified Port, By configuring mCheck, the user can check if there is the bridge running STP in the network segment connected with the active Ethernet port. If there is, the port will transfer to STP compatible mode. In a stable network, though the bridge running STP has been removed, this port will still work in STP compatible mode. In this case, the port can be forced to RSTP mode by setting the variable mCheck " ::= { hwdot1dStpPortXEntry 4 } hwdot1dStpTransLimit OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION " Configuring Maximum Transmission Speed of Specified Port, The maximum transmission speed of Ethernet port is related to its physical state and network structure. The user can configure it according to the actual network situation. " ::= { hwdot1dStpPortXEntry 5 } hwdot1dSetStpDefaultPortCost OBJECT-TYPE SYNTAX INTEGER { enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION " come back to default path cost of specified port, The path cost of Ethernet port is related to its link speed. The higher the link speed is, the lower the path cost should be configured. When this parameter is set to the default value, RSTP can automatically detect the link speed on the current Ethernet port and transform it to corresponding path cost. Options: 1. enable(1) -indicates default path cost of specified port is enabled " ::= { hwdot1dStpPortXEntry 6 } hwdot1dStpPortStatTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDot1dStpPortStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table describes rstp port statistic table, The index of this table is not supported. " ::= { hwRstpMibObject 6 } hwdot1dStpPortStatEntry OBJECT-TYPE SYNTAX HwDot1dStpPortStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table describes rstp port statistic table, The index of this entry is not supported. " AUGMENTS { dot1dStpPortEntry } ::= { hwdot1dStpPortStatTable 1 } HwDot1dStpPortStatEntry ::= SEQUENCE { hwdot1dStpRXStpBPDU Counter32, hwdot1dStpTXStpBPDU Counter32, hwdot1dStpRXTCNBPDU Counter32, hwdot1dStpTXTCNBPDU Counter32, hwdot1dStpRXRSTPBPDU Counter32, hwdot1dStpTXRSTPBPDU Counter32, hwdot1dStpClearStatistics INTEGER } hwdot1dStpRXStpBPDU OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " Number of STP BPDU Received. " ::= { hwdot1dStpPortStatEntry 1 } hwdot1dStpTXStpBPDU OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " Number of STP BPDU Transmitted. " ::= { hwdot1dStpPortStatEntry 2 } hwdot1dStpRXTCNBPDU OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " Number of TCN BPDU Received. " ::= { hwdot1dStpPortStatEntry 3 } hwdot1dStpTXTCNBPDU OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " Number of TCN BPDU Transmitted. " ::= { hwdot1dStpPortStatEntry 4 } hwdot1dStpRXRSTPBPDU OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of RSTP BPDU Received. " ::= { hwdot1dStpPortStatEntry 5 } hwdot1dStpTXRSTPBPDU OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of RSTP BPDU Transmitted. " ::= { hwdot1dStpPortStatEntry 6 } hwdot1dStpClearStatistics OBJECT-TYPE SYNTAX INTEGER { clear(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "To clear statistics of Rapid Spanning Tree Protocol (RSTP for short). Options: 1. clear(1) -indicates clearing statistics of Rapid Spanning Tree Protocol " ::= { hwdot1dStpPortStatEntry 7 } hwRingCheckAdminStatus OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the status of the ring check on the user side. Options: 1. enabled(1) 2. disabled(2) Default: disabled(2) " ::= { hwRstpMibObject 7 } hwBpduTunnelAdminStatus OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Enabling/Disabling BPDU tunneling function. Options: 1. enabled(1) 2. disabled(2) Default: disabled(2) " ::= { hwRstpMibObject 8 } hwRingCheckModeStatus OBJECT-TYPE SYNTAX INTEGER { privateBpdu(0), privateEthtype(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Set ring check mode. Options: 1. privateBpdu(0) -indicates the ring check mode is private-bpdu 2. privateEthtype(1) -indicates the ring check mode is private-ethtype Default: privateBpdu(0) " ::= { hwRstpMibObject 9 } hwRingCheckPrivateEthtype OBJECT-TYPE SYNTAX Unsigned32 (1536..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the private Ethernet protocol type of the user-side ring check packet. Range: 1536-65535 Default: 33536 " ::= { hwRstpMibObject 10 } hwRingCheckResumeInterval OBJECT-TYPE SYNTAX Integer32 (0|1..1440) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the interval time of re-activating the ring check port/ONT/CNU. 0 means to disable the function of automatically re-activating a port/ONT/CNU. 1-1440 indicates the waiting period for the port/ONT/CNU to be automatically re-activated after it is automatically deactivated. Unit: minute Range: 0-1440 Default: 0 " ::= { hwRstpMibObject 11 } hwRingCheckRecordTable OBJECT-TYPE SYNTAX SEQUENCE OF HwRingCheckRecordEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Used to query the deactivation information of ring check, The index of this table is hwRingCheckRecordIndex. " ::= { hwRstpMibObject 12 } hwRingCheckRecordEntry OBJECT-TYPE SYNTAX HwRingCheckRecordEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Used to query the deactivation information of ring check, The index of this entry is hwRingCheckRecordIndex. " INDEX { hwRingCheckRecordIndex } ::= { hwRingCheckRecordTable 1 } HwRingCheckRecordEntry ::= SEQUENCE { hwRingCheckRecordIndex Unsigned32, hwRingCheckRecordFrameIndex Integer32, hwRingCheckRecordSlotIndex Integer32, hwRingCheckRecordPortIndex Integer32, hwRingCheckRecordOntIndex Integer32, hwRingCheckRecordCountdown Integer32 } hwRingCheckRecordIndex OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the index of a deactivation record." ::= { hwRingCheckRecordEntry 1 } hwRingCheckRecordFrameIndex OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the Frame ID of the port/ONT/CNU that is deactivated by ring check." ::= { hwRingCheckRecordEntry 2 } hwRingCheckRecordSlotIndex OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the Slot ID of the port/ONT/CNU that is deactivated by ring check." ::= { hwRingCheckRecordEntry 3 } hwRingCheckRecordPortIndex OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the Port ID of the port/ONT/CNU that is deactivated by ring check." ::= { hwRingCheckRecordEntry 4 } hwRingCheckRecordOntIndex OBJECT-TYPE SYNTAX Integer32 (-1|0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the index of the ONT/CNU that is deactivated by ring check. -1 indicates that the operation object is not ONT/CNU." ::= { hwRingCheckRecordEntry 5 } hwRingCheckRecordCountdown OBJECT-TYPE SYNTAX Integer32 (-1|0..1440) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates remaining waiting time for automatic activation. -1 indicates that the automatic activation function of ring check is disabled. Unit: minute " ::= { hwRingCheckRecordEntry 6 } hwRingCheckTrapNotify OBJECT-TYPE SYNTAX INTEGER { event(1), alarm(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the trap notification mode of ring check on the user side. Options: 1. event(1) -indicates the way of trap is event 2. alarm(2) -indicates the way of trap is alarm Default: event(1) " ::= { hwRstpMibObject 13 } hwRingCheckUplinkDetectionControl OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION " Configure the ring check function on the network side. Options: 1. enabled(1) 2. disabled(2) Default: disabled(2) " ::= { hwRstpMibObject 14 } hwRingCheckCascadeDetectionControl OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION " Configure the ring check function on the cascading side. Options: 1. enabled(1) 2. disabled(2) Default: disabled(2) " ::= { hwRstpMibObject 15 } hwRingCheckOnuSingleTestOperate OBJECT-TYPE SYNTAX INTEGER { start(1), stop(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Starts or stops a single ONU ring check. Options: 1. start(1) -indicates starting a single ONU ring check. 2. stop(2) -indicates stopping a single ONU ring check. Default: stop(2) " ::= { hwRstpMibObject 16 } hwRingCheckOnuSingleTestOvertime OBJECT-TYPE SYNTAX Integer32 (-1|1..100) MAX-ACCESS read-write STATUS current DESCRIPTION "Duration for a single ONU ring check, unit: hour. -1 indicates an invalid value. Default : 1 " ::= { hwRstpMibObject 17 } hwRingCheckOnuSingleTestStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Start time of a single ONU ring check. 1970-1-1,0:0:0.0 indicates that the single ONU ring check does not start. " ::= { hwRstpMibObject 18 } hwRingCheckOnuSingleTestStopTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Stop time of a single ONU ring check. Except for the completed single ONU ring check, 1970-1-1,0:0:0.0 is displayed." ::= { hwRstpMibObject 19 } hwRingCheckOnuSingleTestTargetType OBJECT-TYPE SYNTAX INTEGER { invalid(-1), all(1), slot(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Target type of a single ONU ring check. Options: 1. invalid(-1) -indicates a invalid target type. 2. all(1) -indicates all boards are checked. 3. slot(2) -indicates a specified board is checked. Default: all(1) " ::= { hwRstpMibObject 20 } hwRingCheckOnuSingleTestTargetSlot OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the object specified in a single ONU ring network detection. This node is valid only when hwRingCheckOnuSingleTestTargetType is set to slot. -1 indicates an invalid value. " ::= { hwRstpMibObject 21 } hwRingCheckOnuSingleTestReportTable OBJECT-TYPE SYNTAX SEQUENCE OF HwRingCheckOnuSingleTestReportEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Used to query the report of a single ONU ring check. The index of this table is hwRingCheckOnuSingleTestReportIndex. " ::= { hwRstpMibObject 22 } hwRingCheckOnuSingleTestReportEntry OBJECT-TYPE SYNTAX HwRingCheckOnuSingleTestReportEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Used to query the report of a single ONU ring check. The index of this entry is hwRingCheckOnuSingleTestReportIndex. " INDEX { hwRingCheckOnuSingleTestReportIndex } ::= { hwRingCheckOnuSingleTestReportTable 1 } HwRingCheckOnuSingleTestReportEntry ::= SEQUENCE { hwRingCheckOnuSingleTestReportIndex Unsigned32, hwRingCheckOnuSingleTestReportPonPort InterfaceIndex, hwRingCheckOnuSingleTestReportOnuId Unsigned32, hwRingCheckOnuSingleTestReportLastTime DateAndTime, hwRingCheckOnuSingleTestReportLocation OCTET STRING, hwRingCheckOnuSingleTestReportStatus INTEGER } hwRingCheckOnuSingleTestReportIndex OBJECT-TYPE SYNTAX Unsigned32 (1..16) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of the report of a single ONU ring check." ::= { hwRingCheckOnuSingleTestReportEntry 1 } hwRingCheckOnuSingleTestReportPonPort OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Port index in a single ONU ring check." ::= { hwRingCheckOnuSingleTestReportEntry 2 } hwRingCheckOnuSingleTestReportOnuId OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "ONT ID in a single ONU ring check." ::= { hwRingCheckOnuSingleTestReportEntry 3 } hwRingCheckOnuSingleTestReportLastTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Latest report time of a single ONU ring check." ::= { hwRingCheckOnuSingleTestReportEntry 4 } hwRingCheckOnuSingleTestReportLocation OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Port in a single ONU ring check." ::= { hwRingCheckOnuSingleTestReportEntry 5 } hwRingCheckOnuSingleTestReportStatus OBJECT-TYPE SYNTAX INTEGER { detected(1), resumed(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Status of a single ONU ring check. Options: 1. detected(1) -indicates a ring network is detected. 2. resumed(2) -indicates the ring network is fixed. " ::= { hwRingCheckOnuSingleTestReportEntry 6 } hwRingCheckTrapsVbOids OBJECT IDENTIFIER ::= { hwRstpExt 2 } hwRingCheckRemoteMACAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Indicates the remote Remote mac address. " ::= { hwRingCheckTrapsVbOids 1 } hwCnuIndex OBJECT-TYPE SYNTAX Integer32(0..127) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Indicates the CNU ID. " ::= { hwRingCheckTrapsVbOids 2 } hwRingCheckTraps OBJECT IDENTIFIER ::= { hwRstpExt 3 } hwRingCheckAlarmTraps OBJECT IDENTIFIER ::= { hwRingCheckTraps 1 } hwRingCheckAlarmTrapsPrefix OBJECT IDENTIFIER ::= { hwRingCheckAlarmTraps 0 } hwRingCheckPortRingTrap NOTIFICATION-TYPE OBJECTS { hwFrameIndex, hwSlotIndex, hwPortIndex, hwRingCheckRemoteMACAddress, hwFrameIndex, hwSlotIndex, hwPortIndex } STATUS current DESCRIPTION "The SNMP trap is generated when the ring topology in the subscriber port is found. " ::= { hwRingCheckAlarmTraps 0 1 } hwRingCheckXponPortRingTrap NOTIFICATION-TYPE OBJECTS { hwFrameIndex, hwSlotIndex, hwPortIndex, hwOntIndex, hwRingCheckRemoteMACAddress, hwFrameIndex, hwSlotIndex, hwPortIndex, hwOntIndex } STATUS current DESCRIPTION "The SNMP trap is generated when the ring topology in the subscriber xPON port is found. " ::= { hwRingCheckAlarmTraps 0 2 } hwRingCheckEocPortRingTrap NOTIFICATION-TYPE OBJECTS { hwFrameIndex, hwSlotIndex, hwPortIndex, hwCnuIndex, hwRingCheckRemoteMACAddress, hwFrameIndex, hwSlotIndex, hwPortIndex, hwCnuIndex } STATUS current DESCRIPTION "The SNMP trap is generated when the ring topology in the subscriber EoC port is found. " ::= { hwRingCheckAlarmTraps 0 3 } hwRingCheckAlarmWarningTrapsPrefix OBJECT IDENTIFIER ::= { hwRingCheckAlarmTraps 1 } hwRingCheckPortRingWarningTrap NOTIFICATION-TYPE OBJECTS { hwFrameIndex, hwSlotIndex, hwPortIndex, hwRingCheckRemoteMACAddress, hwFrameIndex, hwSlotIndex, hwPortIndex } STATUS current DESCRIPTION "The SNMP trap is generated when the ring topology in the subscriber port is found. " ::= { hwRingCheckAlarmTraps 1 1 } hwRingCheckXponPortRingWarningTrap NOTIFICATION-TYPE OBJECTS { hwFrameIndex, hwSlotIndex, hwPortIndex, hwOntIndex, hwRingCheckRemoteMACAddress, hwFrameIndex, hwSlotIndex, hwPortIndex, hwOntIndex } STATUS current DESCRIPTION "The SNMP trap is generated when the ring topology in the subscriber xPON port is found. " ::= { hwRingCheckAlarmTraps 1 2 } hwRingCheckEocPortRingWarningTrap NOTIFICATION-TYPE OBJECTS { hwFrameIndex, hwSlotIndex, hwPortIndex, hwCnuIndex, hwRingCheckRemoteMACAddress, hwFrameIndex, hwSlotIndex, hwPortIndex, hwCnuIndex } STATUS current DESCRIPTION "The SNMP trap is generated when the ring topology in the subscriber EoC port is found. " ::= { hwRingCheckAlarmTraps 1 3 } hwRingCheckPortRingClearedTrap NOTIFICATION-TYPE OBJECTS { hwFrameIndex, hwSlotIndex, hwPortIndex, hwRingCheckRemoteMACAddress, hwFrameIndex, hwSlotIndex, hwPortIndex } STATUS current DESCRIPTION "The SNMP trap is generated when the ring topology in the subscriber port is cleared. " ::= { hwRingCheckAlarmTraps 1 4 } hwRingCheckXponPortRingClearedTrap NOTIFICATION-TYPE OBJECTS { hwFrameIndex, hwSlotIndex, hwPortIndex, hwOntIndex, hwRingCheckRemoteMACAddress, hwFrameIndex, hwSlotIndex, hwPortIndex, hwOntIndex } STATUS current DESCRIPTION "The SNMP trap is generated when the ring topology in the subscriber xPON port is cleared. " ::= { hwRingCheckAlarmTraps 1 5 } hwRingCheckEocPortRingClearedTrap NOTIFICATION-TYPE OBJECTS { hwFrameIndex, hwSlotIndex, hwPortIndex, hwCnuIndex, hwRingCheckRemoteMACAddress, hwFrameIndex, hwSlotIndex, hwPortIndex, hwCnuIndex } STATUS current DESCRIPTION "The SNMP trap is generated when the ring topology in the subscriber EoC port is cleared. " ::= { hwRingCheckAlarmTraps 1 6 } END