-- ================================================================================================= -- Copyright (C) 2018 by HUAWEI TECHNOLOGIES. All rights reserved. -- Description: This mib is used for defining the IPMB Aiu Proctect MIB objects of the protection -- group and smart link monitor group. -- Reference: Inherit from APMB -- Version: V1.37 -- ================================================================================================== HUAWEI-PROTECTION-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Integer32, Unsigned32, IpAddress FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF TEXTUAL-CONVENTION, RowStatus, DateAndTime, MacAddress FROM SNMPv2-TC ifIndex FROM IF-MIB huaweiUtility FROM HUAWEI-MIB hwFrameIndex, hwSlotIndex FROM HUAWEI-DEVICE-MIB; hwProtection MODULE-IDENTITY LAST-UPDATED "201803140000Z" ORGANIZATION "Huawei Technologies Co.,Ltd." CONTACT-INFO "Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China Website: http://www.huawei.com Email: support@huawei.com " DESCRIPTION "This mib is used for defining the IPMB Aiu Proctect MIB objects of the protection group and smart link monitor group." -- Revision history REVISION "201803140000Z" DESCRIPTION "V1.37, changes in this revision: - Added invalid value for hwPsGroupPortStateTimerOffTime and hwPsGroupPortStateTimerOnTime. " REVISION "201801230000Z" DESCRIPTION "V1.36, changes in this revision: - Add leaf hwPsGroupStandbyPortRssiMonitoringPolicySwitch in table hwPsGroupExtTable. - Add leaf hwPsGroupStandbyPortRssiMonitoringInterval in table hwPsGroupExtTable. - Add leaf hwPsGroupStandbyPortRssiMonitoringLowRssiAlarmThreshold in table hwPsGroupExtTable. " REVISION "201712120000Z" DESCRIPTION "V1.35, changes in this revision: - Added enumerate value invalid(-1) for hwMonitorLinkUpLinkStatus." REVISION "201711070000Z" DESCRIPTION "V1.34, changes in this revision: - Add leaf hwPsGroupStandbyPortSuppressFlappingSwitch in table hwPsGroupExtTable. " REVISION "201709290000Z" DESCRIPTION "V1.33, changes in this revision: - Add leaf hwPsGroupPortStateTimerOffTime in table hwPsGroupExtTable. - Add leaf hwPsGroupPortStateTimerOnTime in table hwPsGroupExtTable. " REVISION "201708160000Z" DESCRIPTION "V1.32, changes in this revision: - modified the description of hwSmartLinkFlushRecvLastTime, hwSmartLinkFlushRecvLastSrcMacAddr, hwMonitorLinkUpLinkUpTime, hwMonitorLinkUpLinkDownTime, hwMonitorLinkDownLinkUpTime and hwMonitorLinkDownLinkDownTime. " REVISION "201707070000Z" DESCRIPTION "V1.31, changes in this revision: - added hwMonitorLinkDownLinkOntId and hwMonitorLinkDownLinkOntPortId. - modified the description of hwMonitorLinkGroupId and hwMonitorLinkDownLinkId. " REVISION "201701050000Z" DESCRIPTION "V1.30, changes in this revision: - added enumerate value for hwPgGroupProtectTarget. " REVISION "201608290000Z" DESCRIPTION "V1.29, changes in this revision: - Modify the value range of hwPsGroupAntiJitterTime. - Modify the value range of hwPgGroupAssociatedUpLinkMdIndex. - Modify the value range of hwPgGroupAssociatedUpLinkMaIndex. - Modify the value range of hwPgGroupAssociatedUpLinkMepIndex. " REVISION "201603310000Z" DESCRIPTION "V1.28, changes in this revision: - Add leaf hwPsGroupStandbyDetectSwitch in table hwPsGroupExtTable. " REVISION "201508050000Z" DESCRIPTION "V1.27, changes in this revision: - Modify the description of hwPsDpLocalNodeIpAddress. - Modify the description of hwPsDpLocalNodeTcpPort. - Modify the description of hwPsDpPeerNodeIpAddress. - Modify the description of hwPsDpPeerNodeTcpPort. " REVISION "201507290000Z" DESCRIPTION "V1.26, changes in this revision: - Modify the description of hwPsDpPeerNodeRowStatus. " REVISION "201504290000Z" DESCRIPTION "V1.25, changes in this revision: - Add the leaf hwPgGroupAssociatedUpLinkMdIndex, hwPgGroupAssociatedUpLinkMaIndex, hwPgGroupAssociatedUpLinkMepIndex, hwPsGroupDpPeerNodeName, hwPsGroupDpPeerFrameSlotPort and hwPsGroupDpHandshakeStatus in table hwPsGroupExtTable. - Add the table hwPsDpGlobalConfig to configure the global configuration information of dual parenting. - Add the table hwPsDpPeerNodeTable to configure the peer node information of dual parenting. " REVISION "201412160000Z" DESCRIPTION "V1.24, delete the illlegal string IMPLIED." REVISION "201410140000Z" DESCRIPTION "V1.23, modified the value range of hwPgGroupAssociatedUpLinkBfd." REVISION "201406300000Z" DESCRIPTION "V1.22, modified the MAX-ACCESS of hwPgGroupId and hwMonitorLinkGroupId. modified hwProtectionTrapsVbOids to hwPgGroupTraps." REVISION "201211120000Z" DESCRIPTION "V1.21, changes in this revision: - Add leaf hwPsGroupStandardTypeB in table hwPsGroupExtTable. " REVISION "201204140000Z" DESCRIPTION "V1.20, added invalid enumerate value for hwPgGroupAssociatedUpLinkStatus. Added invalid value for hwPgGroupAssociatedUpLinkBfd and hwPgGroupAssociatedUpLinkPort." REVISION "201202090000Z" DESCRIPTION "V1.19, modified the description of hwSmartLinkFlushRecvLastIfIndex and hwSmartLinkFlushRecvLastCtrlVlan." REVISION "201109090000Z" DESCRIPTION "V1.18, added enumerate value for hwPgGroupWorkMode." REVISION "201107140000Z" DESCRIPTION "V1.17, Added enumerate values exerciseswitch(7) and undoexerciseswitch(8) for hwPgMemberOper and hwPgOntMemberOper. Added enumerate value exerciseswitch(9) for hwPgMemberStatus and hwPgOntMemberStatus." REVISION "201012210000Z" DESCRIPTION "V1.16, added invalid enumerate value for hwPsGroupLoadBalanceState and hwPsGroupPppoeSingleMac. Added invalid value for hwPsGroupAntiJitterTime." REVISION "201011160000Z" DESCRIPTION "V1.15, the description of this MIB is modified according to the tool." REVISION "201008030000Z" DESCRIPTION "V1.14, modified description and format of the file." REVISION "201006180000Z" DESCRIPTION "V1.13, the object description contained in hwPsGroupTable, hwPsMemberTable and hwPsOntMemberTable was modified." REVISION "201005150000Z" DESCRIPTION "V1.12, modified description of leaves." REVISION "201004020000Z" DESCRIPTION "V1.11, the system supported the definitions of a new standard trap node." REVISION "201001280000Z" DESCRIPTION "V1.10, added hwPsOntMemberTable Modified hwPsGroupTable, and added enumerate value for hwPgGroupProtectTarget Modified hwSmartLinkTraps, and redefined OBJECT IDENTIFIER 14 to 17." REVISION "201001090000Z" DESCRIPTION "V1.08, modified description of objects. Modified datatype definition INTEGER to Integer32." REVISION "200903260000Z" DESCRIPTION "V1.06, modified hwPsGroupTable. Renamed stm-unidirection to unidirection. Renamed stm-bidirection to bidirection. Renamed stm1-nni-port to stm-nni-port." REVISION "200812310000Z" DESCRIPTION "V1.05, modified hwPsGroupTable. Renamed hwPgGroupWTR to hwPgGroupReversionTime. Added enumerate value for hwPgGroupWorkMode. Added hwPgGroupProtectTarget. Moved hwPgGroupAntiJitterTime to hwPsGroupExtTable. Added hwPsGroupExtTable, hwPsGroupLoadBalanceTable. Added hwSmartLinkFlushRecvPortTable. Added hwSmartLinkFlushRecvLastIfIndex, hwSmartLinkFlushRecvLastTime. Added hwSmartLinkFlushRecvLastSrcMacAddr, hwSmartLinkFlushRecvLastIfIndex. Added hwMonitorLinkGroupTable, hwMonitorLinkUpLinkTable, hwMonitorLinkDownLinkTable." REVISION "200607310000Z" DESCRIPTION "V1.00, initial version" ::= { huaweiUtility 50 } hwProtectionTable OBJECT-TYPE SYNTAX SEQUENCE OF HwProtectionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Port protection table.This table is use to record the indices, workMode and other infomation of the two ports which is in protection group. ifIndex is the index of the working interface. For non-ETH board-level protection group, the port number is 0; for the ETH board-level protection group, the port number is 127. The index of this table is ifIndex. " ::= { hwProtection 1 } hwProtectionEntry OBJECT-TYPE SYNTAX HwProtectionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Port protection table.This table is use to record the indices, workMode and other infomation of the two ports which is in protection group. ifIndex is the index of the working interface. For non-ETH board-level protection group, the port number is 0; for the ETH board-level protection group, the port number is 127. The index of this entry is ifIndex. " INDEX { ifIndex } ::= { hwProtectionTable 1 } HwProtectionEntry ::= SEQUENCE { hwPgType INTEGER, hwPgCurrentWorkEntity INTEGER, hwPgProtectIfIndex Integer32, hwPgMngtEnable INTEGER, hwPgMngtAdminStatus INTEGER, hwPgWorkMode INTEGER, hwPgRowStatus RowStatus, hwPgWeight Integer32, hwPgStandbyOnTime Integer32, hwPgHoldTime Integer32, hwPgPriority INTEGER } hwPgType OBJECT-TYPE SYNTAX INTEGER { e1(1), atmapm(2), atmaiu(3), atmaic(4), atmmmxboard(5), atmmmxport(6), eth(7) } MAX-ACCESS read-create STATUS current DESCRIPTION " Port protection type. Options: 1.e1(1) - indicates that the port protection type is e1 2.atmapm(2) - indicates that the port protection type is atmapm 3.atmaiu(3) - indicates that the port protection type is atmaiu 4.atmaic(4) - indicates that the port protection type is atmaic 5.atmmmxboard(5) - indicates that the port protection type is atmmmxboard 6.atmmmxport(6) - indicates that the port protection type is atmmmxport 7.eth(7) - indicates that the port protection type is eth " ::= { hwProtectionEntry 1 } hwPgCurrentWorkEntity OBJECT-TYPE SYNTAX INTEGER { work(1), protect(2) } MAX-ACCESS read-only STATUS current DESCRIPTION " Whether the current board or port is the working or the protecting one. Options: 1. work(1) - indicates that the port is working 2. protect(2) - indicates that the port is protecting " ::= { hwProtectionEntry 2 } hwPgProtectIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION " Index of the protecting board (the specified port number is 0). " ::= { hwProtectionEntry 3 } hwPgMngtEnable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-create STATUS current DESCRIPTION " Enables or disables the protection function. Options: 1. enable(1) - indicates that the port protection function is enabled 2. disable(2) - indicates that the port protection function is disabled " ::= { hwProtectionEntry 4 } hwPgMngtAdminStatus OBJECT-TYPE SYNTAX INTEGER { switch(1) } MAX-ACCESS read-create STATUS current DESCRIPTION " Protection operation. Options: 1. switch(1) - Forced switchover " ::= { hwProtectionEntry 5 } hwPgWorkMode OBJECT-TYPE SYNTAX INTEGER { uniformRoute(1), diverseRoute(2), portState(3), timedelay(4), lacp(5), timebis(6) } MAX-ACCESS read-create STATUS current DESCRIPTION " Working mode of the protection group. Options: 1.uniformRoute(1) - working mode of the protection group is uniform route 2.diverseRoute(2) - working mode of the protection group is diverse route 3.portState(3) - working mode of the protection group is port state 4.timedelay(4) - working mode of the protection group is delay detection 5.lacp(5) - working mode of the protection group is LACP 6.timebis(6) - working mode of the protection group is timebis " DEFVAL{ 1 } ::= { hwProtectionEntry 6 } hwPgRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION " Protection operation (4: Add; 6: Delete). Options: 1. Add(4) - add protection group 2. Delete(6) - delete protection group " ::= { hwProtectionEntry 7 } hwPgWeight OBJECT-TYPE SYNTAX Integer32 (1..100) MAX-ACCESS read-create STATUS current DESCRIPTION " Protection group weight. " DEFVAL{ 10 } ::= { hwProtectionEntry 8 } hwPgStandbyOnTime OBJECT-TYPE SYNTAX Integer32 (40..1000) UNITS "ms" MAX-ACCESS read-create STATUS current DESCRIPTION " Open time of standby port when checking port status of the standby board. Unit: ms The time equals to the returnd value multiply by 10. " DEFVAL{ 100 } ::= { hwProtectionEntry 9 } hwPgHoldTime OBJECT-TYPE SYNTAX Integer32 (0..1000) UNITS "ms" MAX-ACCESS read-create STATUS current DESCRIPTION " The delay-time of checking protection group. Unit: ms The time equals to the returnd value multiply by 10. " DEFVAL{ 0 } ::= { hwProtectionEntry 10 } hwPgPriority OBJECT-TYPE SYNTAX INTEGER { low(1), middle(2), high(3) } MAX-ACCESS read-create STATUS current DESCRIPTION " Group-protect Priority. Options: 1.low(1) - indicates that the priority of the protection group is low 2.middle(2) - indicates that the priority of the protection group is middle 3.high(3) - indicates that the priority of the protection group is high " DEFVAL{ 1 } ::= { hwProtectionEntry 11 } hwProtectionAbilityTable OBJECT-TYPE SYNTAX SEQUENCE OF HwProtectionAbilityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table is no longer used. The indexes of this table are hwFrameIndex and hwSlotIndex. " ::= { hwProtection 2 } hwProtectionAbilityEntry OBJECT-TYPE SYNTAX HwProtectionAbilityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table is no longer used. The indexes of this entry are hwFrameIndex and hwSlotIndex. " INDEX { hwFrameIndex, hwSlotIndex } ::= { hwProtectionAbilityTable 1 } HwProtectionAbilityEntry ::= SEQUENCE { hwPgAbilityType INTEGER, hwPgOtherFrame Integer32, hwPgOtherSlot Integer32 } hwPgAbilityType OBJECT-TYPE SYNTAX INTEGER { e1(1), atmapm(2), atmaiu(3), atmaic(4), atmmmxboard(5), atmmmxport(6), eth(7) } MAX-ACCESS read-only STATUS current DESCRIPTION " Protection type.This object is no longer used. Options: 1.e1(1) - indicates that the protection type is e1 2.atmapm(2) - indicates that the protection type is atmapm 3.atmaiu(3) - indicates that the protection type is atmaiu 4.atmaic(4) - indicates that the protection type is atmaic 5.atmmmxboard(5) - indicates that the protection type is atmmmxboard 6.atmmmxport(6) - indicates that the protection type is atmmmxport 7.eth(7) - indicates that the protection type is eth " ::= { hwProtectionAbilityEntry 1 } hwPgOtherFrame OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " ID of the shelf where protection group 2 is located. This object is no longer used. " ::= { hwProtectionAbilityEntry 2 } hwPgOtherSlot OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " ID of the slot where protection group 2 is located. This object is no longer used. " ::= { hwProtectionAbilityEntry 3 } hwGauPortProtectTable OBJECT-TYPE SYNTAX SEQUENCE OF HwGauPortProtectEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Gau port config protective group.The index of this table is hwGauFirstPortIfIndex. " ::= { hwProtection 3 } hwGauPortProtectEntry OBJECT-TYPE SYNTAX HwGauPortProtectEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Gau port config protective group.The index of this entry is hwGauFirstPortIfIndex. " INDEX { hwGauFirstPortIfIndex } ::= { hwGauPortProtectTable 1 } HwGauPortProtectEntry ::= SEQUENCE { hwGauFirstPortIfIndex Integer32, hwGauSecondPortIfIndex Integer32, hwGauPortrotectRowStatus RowStatus, hwGauPortCurrentActiveIfIndex Integer32 } hwGauFirstPortIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION " Gau first port ifindex. " ::= { hwGauPortProtectEntry 1 } hwGauSecondPortIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION " Gau Second port ifindex. " ::= { hwGauPortProtectEntry 2 } hwGauPortrotectRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION " Config protective group rowstauts. " ::= { hwGauPortProtectEntry 3 } hwGauPortCurrentActiveIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " Current active port ifindex. " ::= { hwGauPortProtectEntry 4 } hwPgCheckFrequency OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION " protection group check frequency. " ::= { hwProtection 4 } hwPsGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF HwPsGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Group table. The objects in hwPsGroupTable are used for performing operations associated with the protection group. The operations include creating and deleting a protection group, setting the protection group switchover function, setting the switchover recovery waiting time, setting the description information about a protection group, freezing and unfreezing a protection group, enabling and disabling a protection group, and querying the settings of a protection group. The index of this table is hwPgGroupId. " ::= { hwProtection 5 } hwPsGroupEntry OBJECT-TYPE SYNTAX HwPsGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Group table. The objects in hwPsGroupTable are used for performing operations associated with the protection group. The operations include creating and deleting a protection group, setting the protection group switchover function, setting the switchover recovery waiting time, setting the description information about a protection group, freezing and unfreezing a protection group, enabling and disabling a protection group, and querying the settings of a protection group. The index of this entry is hwPgGroupId. " INDEX{ hwPgGroupId } ::= { hwPsGroupTable 1 } HwPsGroupEntry ::= SEQUENCE { hwPgGroupId Integer32, hwPgGroupWorkMode INTEGER, hwPgGroupReversionTime Integer32, hwPgGroupReversion INTEGER, hwPgGroupFreeze INTEGER, hwPgGroupAdmin INTEGER, hwPgGroupDesc OCTET STRING, hwPgGroupProtectTarget INTEGER, hwPgGroupRowStatus RowStatus } hwPgGroupId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION " Protection group ID. " ::= { hwPsGroupEntry 1 } hwPgGroupWorkMode OBJECT-TYPE SYNTAX INTEGER { timedelay(1), portstate(2), smartlink(3), unidirection(4), bidirection(5), smartlinkbalance(6), boardstate(7), dualparenting(8) } MAX-ACCESS read-create STATUS current DESCRIPTION " Group workmode. Options: 1. timedelay(1) -ETH delay mode. 2. portstate(2) -ETH state mode. 3. smartlink(3) -SMART LINK active/standby mode. 4. unidirection(4) -STM-1 single-direction protection mode. 5. bidirection(5) -bidirection. 6. smartlinkbalance(6)-SMART LINK load sharing mode. 7. boardstate(7) -Board state mode. 8. dualparenting(8) -Dual-parenting mode. " ::= { hwPsGroupEntry 2 } hwPgGroupReversionTime OBJECT-TYPE SYNTAX Integer32 (1..1440) UNITS "second" MAX-ACCESS read-create STATUS current DESCRIPTION " Group reversion time. Range: 1-1440 Default: 720 Unit: second " ::= { hwPsGroupEntry 3 } hwPgGroupReversion OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-create STATUS current DESCRIPTION " Group reversion operation. Options: 1. enable(1) -indicates that the protection group switchover recovery function is enabled 2. disable(2) -indicates that the protection group switchover recovery function is disabled " ::= { hwPsGroupEntry 4 } hwPgGroupFreeze OBJECT-TYPE SYNTAX INTEGER { freeze(1), undofreeze(2) } MAX-ACCESS read-create STATUS current DESCRIPTION " Group freeze operation. Options: 1. freeze(1) -Frozen state 2. undofreeze(2) -Unfrozen state " ::= { hwPsGroupEntry 5 } hwPgGroupAdmin OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-create STATUS current DESCRIPTION " Group admin operation. Options: 1. enable(1) -The protection group is enabled 2. disable(2) -The protection group is disabled " ::= { hwPsGroupEntry 6 } hwPgGroupDesc OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) MAX-ACCESS read-create STATUS current DESCRIPTION " Group description. All characters must between 0x20 and 0x7E, and can not be question mark. Double quotation mark can not be the first or last character. Blank can not follow double quotation mark. " ::= { hwPsGroupEntry 7 } hwPgGroupProtectTarget OBJECT-TYPE SYNTAX INTEGER { asmainboard(1), asmainboardport(2), asmainboardlag(3), ethnniport(4), ethnnilagmember(5), eponuniport(6), gponuniport(7), stmnniport(8), serviceprocessboard(9), eponuniont(10), gponuniont(11), twdmchannelgroup(12) } MAX-ACCESS read-create STATUS current DESCRIPTION " Group protect target. Options: 1. asmainboard(1) -Active main board and standby main board. 2. asmainboardport(2) -Port of active main board and standby main board. 3. asmainboardlag(3) -LAG of active main board and standby main board. 4. ethnniport(4) -Port of Ethernet nni. 5. ethnnilagmember(5) -LAG member of Ethernet nni. 6. eponuniport(6) -Port of EPON uni. 7. gponuniport(7) -Port of GPON uni. 8. stmnniport(8) -Port of STM-1 nni. 9. serviceprocessboard(9)-serviceprocessboard. 10.eponuniont(10) -Ont of EPON uni. 11.gponuniont(11) -Ont of GPON uni. 12.twdmchannelgroup(12) - Channel group of TWDM PON. " ::= { hwPsGroupEntry 9 } hwPgGroupRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION " Group rowstatus. Options: 1. createAndGo(4) -create a new instance of a conceptual row 2. destroy(6) -delete the instances associated with an existing conceptual row " ::= { hwPsGroupEntry 10 } hwPsMemberTable OBJECT-TYPE SYNTAX SEQUENCE OF HwPsMemberEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Member table. The objects in hwPsMemberTable are used for performing operations associated with the protection group member. The operations include adding and deleting a member, forced or manual switchover, locking a member, and querying the information about a member. This table is used to manage only the protection group member which is a port or a board. To manage the protection group member which is an ONT, use hwPsOntMemberTable. The indexes of this table are IfIndex and hwPgGroupId. When IfIndex = -1, walk all member of hwPgGroupId. Only ifIndex can be used to determine specific members. " ::= { hwProtection 6 } hwPsMemberEntry OBJECT-TYPE SYNTAX HwPsMemberEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Member table. The objects in hwPsMemberTable are used for performing operations associated with the protection group member. The operations include adding and deleting a member, forced or manual switchover, locking a member, and querying the information about a member. This table is used to manage only the protection group member which is a port or a board. To manage the protection group member which is an ONT, use hwPsOntMemberTable. The indexes of this entry are IfIndex and hwPgGroupId. When IfIndex = -1, walk all member of hwPgGroupId. Only ifIndex can be used to determine specific members. " INDEX { ifIndex, hwPgGroupId } ::= { hwPsMemberTable 1 } HwPsMemberEntry ::= SEQUENCE { hwPgMemberRole INTEGER, hwPgMemberOper INTEGER, hwPgMemberStatus INTEGER, hwPgDstMember Integer32, hwPgMemberRunningState INTEGER, hwPgMemberPeerMember Integer32, hwPgMemberRowStatus RowStatus } hwPgMemberRole OBJECT-TYPE SYNTAX INTEGER { work(1), protect(2) } MAX-ACCESS read-create STATUS current DESCRIPTION " Member role. Options: 1. work(1) -Working member 2. protect(2) -Protection member " ::= { hwPsMemberEntry 1 } hwPgMemberOper OBJECT-TYPE SYNTAX INTEGER { manualswitch(1), undomanualswitch(2), forceswitch(3), undoforceswitch(4), lockout(5), unlockout(6), exerciseswitch(7), undoexerciseswitch(8) } MAX-ACCESS read-write STATUS current DESCRIPTION " Member operation. Options: 1. manualswitch(1) -manual-switch The manual switchover can be performed only when the protection group is enabled, no member is locked, no forced switchover is performed, and no member is faulty 2. undomanualswitch(2)-undo-manual-switch 3. forceswitch(3) -force-switch The forced switchover can be performed only when the protection group is enabled and no member is locked When the command for this operation is issued, the switchover is performed regardless of whether the specified target member is normal 4. undoforceswitch(4) -undo force-switch 5. lockout(5) -The protection group member is locked. After being locked, the protection group member does not participate in protection group switchover 6. unlockout(6) -The protection group member is unlocked. After being unlocked, the protection group member continues to participate in protection group switchover 7. exerciseswitch(7) --exercise-switch The exercise switchover can be performed only when the protection group is enabled, no member is locked, no other type switchover is performed, and no member is faulty When the command for this operation is issued, no actual switchover is performed, only members's status is changed 8. undoexerciseswitch(8)-undo exercise-switch Reading this object will result in implementation-specific results. " ::= { hwPsMemberEntry 2 } hwPgMemberStatus OBJECT-TYPE SYNTAX INTEGER { null(1), manualswitchsrc(2), manualswitchdst(3), forceswitchsrc(4), forceswitchdst(5), autoswitchsrc(6), autoswitchdst(7), lockout(8), exerciseswitch(9) } MAX-ACCESS read-only STATUS current DESCRIPTION " Member status. Options: 1. null(1) -Null operation 2. manualswitchsrc(2) -Source member of the manual switchover 3. manualswitchdst(3) -Target member of the manual switchover 4. forceswitchsrc(4) -Source member of the forced switchover 5. forceswitchdst(5) -Target member of the forced switchover 6. autoswitchsrc(6) -Source member of the automatic switchover 7. autoswitchdst(7) -Target member of the automatic switchover 8. lockout(8) -Locked 9. exerciseswitch(9) -Exercise switched " ::= { hwPsMemberEntry 3 } hwPgDstMember OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION " Target member ifindex.Reading this object will result in implementation-specific results. " ::= { hwPsMemberEntry 4 } hwPgMemberRunningState OBJECT-TYPE SYNTAX INTEGER { active(1), standby(2), adding(3), deleting(4), switching(5) } MAX-ACCESS read-only STATUS current DESCRIPTION " Member status. Options: 1. active(1) -State of the member that carries the service 2. standby(2) -State of the member that does not carry the service 3. adding(3) -Adding 4. deleting(4) -Deleting 5. switching(5)-Switching " ::= { hwPsMemberEntry 5 } hwPgMemberPeerMember OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " Peer member ifindex. " ::= { hwPsMemberEntry 6 } hwPgMemberRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION " Member rowstatus. Options: 1. createAndGo(4) -create a new instance of a conceptual row 2. destroy(6) -delete the instances associated with an existing conceptual row " ::= { hwPsMemberEntry 8 } hwPsGroupExtTable OBJECT-TYPE SYNTAX SEQUENCE OF HwPsGroupExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Protect extended Group table.The index of this table is hwPgGroupId. This table is used to config private parameter of protection group. " ::= { hwProtection 7 } hwPsGroupExtEntry OBJECT-TYPE SYNTAX HwPsGroupExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Protect extended Group table.The index of this entry is hwPgGroupId. This table is used to config private parameter of protection group. " INDEX {hwPgGroupId} ::= { hwPsGroupExtTable 1 } HwPsGroupExtEntry ::= SEQUENCE { hwPsGroupFlushSendCtrlVlan Integer32, hwPsGroupFlushSendPassword OCTET STRING, hwPsGroupLoadBalanceState INTEGER, hwPsGroupPppoeSingleMac INTEGER, hwPsGroupAntiJitterTime Integer32, hwPgGroupAssociatedUpLinkBfd OCTET STRING, hwPgGroupAssociatedUpLinkPort Integer32, hwPgGroupAssociatedUpLinkStatus INTEGER, hwPsGroupStandardTypeB INTEGER, hwPgGroupAssociatedUpLinkMdIndex Integer32, hwPgGroupAssociatedUpLinkMaIndex Integer32, hwPgGroupAssociatedUpLinkMepIndex Integer32, hwPsGroupDpPeerNodeName OCTET STRING, hwPsGroupDpPeerFrameSlotPort Unsigned32, hwPsGroupDpHandshakeStatus INTEGER, hwPsGroupStandbyDetectSwitch INTEGER, hwPsGroupPortStateTimerOffTime Integer32, hwPsGroupPortStateTimerOnTime Integer32, hwPsGroupStandbyPortSuppressFlappingSwitch INTEGER, hwPsGroupStandbyPortRssiMonitoringPolicySwitch INTEGER, hwPsGroupStandbyPortRssiMonitoringInterval Integer32, hwPsGroupStandbyPortRssiMonitoringLowRssiAlarmThreshold Integer32 } hwPsGroupFlushSendCtrlVlan OBJECT-TYPE SYNTAX Integer32(-1 | 1..4093) MAX-ACCESS read-create STATUS current DESCRIPTION " Control VLAN ID of flush packet which to send. -1 means set VLAN ID to useless value. " ::= { hwPsGroupExtEntry 1 } hwPsGroupFlushSendPassword OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..16)) MAX-ACCESS read-create STATUS current DESCRIPTION " Password of flush packet which to send. Blank string means set password to useless value. All characters must between 0x20 and 0x7E, and can not be question mark. Double quotation mark can not be the first or last character. Blank can not follow double quotation mark. " ::= { hwPsGroupExtEntry 2 } hwPsGroupLoadBalanceState OBJECT-TYPE SYNTAX INTEGER { allonwork(1), allonprotect(2), loadbalance(3), invalid(-1) } MAX-ACCESS read-only STATUS current DESCRIPTION " Load balance state of smart link protect group. Options: 1. allonwork(1) - Load balance state of smart link protect group is allonwork 2. allonprotect(2) - Load balance state of smart link protect group is allonprotect 3. loadbalance(3) - Load balance state of smart link protect group is loadbalance 4. invalid(-1) - Load balance state of smart link protect group is invalid " ::= { hwPsGroupExtEntry 3 } hwPsGroupPppoeSingleMac OBJECT-TYPE SYNTAX INTEGER { bind(1), unbind(2), invalid(-1) } MAX-ACCESS read-create STATUS current DESCRIPTION " group pppoe single-mac operation. Options: 1.bind(1) - The operation is bound 2.unbind(2) - The operation is unbound 3.invalid(-1) - The operation is invalid " ::= { hwPsGroupExtEntry 4 } hwPsGroupAntiJitterTime OBJECT-TYPE SYNTAX Integer32 (-1 | 1..1440) MAX-ACCESS read-create STATUS current DESCRIPTION " Set anti-jitter time gpon or epon protect-group. The allowable value is from 1 to 1440 seconds. The invalid value is -1. Defaut value is 720 seconds. " ::= { hwPsGroupExtEntry 5 } hwPgGroupAssociatedUpLinkBfd OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..15)) MAX-ACCESS read-write STATUS current DESCRIPTION " This indicates the name of the BFD session which will be bound/unbound. " ::= { hwPsGroupExtEntry 6 } hwPgGroupAssociatedUpLinkPort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION " ETH port member ifindex which will be bound/unbound. " ::= { hwPsGroupExtEntry 7 } hwPgGroupAssociatedUpLinkStatus OBJECT-TYPE SYNTAX INTEGER { binddown(1), bindup(2), unbind(3), invalid(-1) } MAX-ACCESS read-only STATUS current DESCRIPTION " group uplink monitor status. Options: 1.binddown(1) - uplink status is down 2.bindup(2) - uplink status is up 3.unbind(3) - unbound uplink monitor 4.invalid(-1) - The operation is invalid " ::= { hwPsGroupExtEntry 8 } hwPsGroupStandardTypeB OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2), invalid(-1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates whether the GPON uni port protect-group is standard Type B. Options: 1. yes(1) - Standard Type B 2. no(2) - Nonstandard Type B 3. invalid(-1) - Indicates that no information is detected " ::= { hwPsGroupExtEntry 9 } hwPgGroupAssociatedUpLinkMdIndex OBJECT-TYPE SYNTAX Integer32(-1 | 0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the MD index which will be bound/unbound. hwPgGroupAssociatedUpLinkMdIndex, hwPgGroupAssociatedUpLinkMaIndex and hwPgGroupAssociatedUpLinkMepIndex must be issued together. " ::= { hwPsGroupExtEntry 10 } hwPgGroupAssociatedUpLinkMaIndex OBJECT-TYPE SYNTAX Integer32(-1 | 0..4095) MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the MA index which will be bound/unbound. hwPgGroupAssociatedUpLinkMdIndex, hwPgGroupAssociatedUpLinkMaIndex and hwPgGroupAssociatedUpLinkMepIndex must be issued together. " ::= { hwPsGroupExtEntry 11 } hwPgGroupAssociatedUpLinkMepIndex OBJECT-TYPE SYNTAX Integer32(-1 | 1..8191) MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the MEP index which will be bound/unbound. hwPgGroupAssociatedUpLinkMdIndex, hwPgGroupAssociatedUpLinkMaIndex and hwPgGroupAssociatedUpLinkMepIndex must be issued together. " ::= { hwPsGroupExtEntry 12 } hwPsGroupDpPeerNodeName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..15)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the peer node name of Type B dual parenting protect group. The empty string indicates that the peer node name is deleted. " ::= { hwPsGroupExtEntry 13 } hwPsGroupDpPeerFrameSlotPort OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the peer node frameid, slotid and portid of Type B dual parenting protect group. Format: frameid(2bytes) + slotid(1bytes) + portid(1bytes) An invalid value 0xFFFFFFFF indicates that the peer node frameid, slotid and portid is deleted. " ::= { hwPsGroupExtEntry 14 } hwPsGroupDpHandshakeStatus OBJECT-TYPE SYNTAX INTEGER { normal(1), failed(2), invalid(-1) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the handshake status between the local member and peer member of dual parenting protect group. Options: 1. normal(1) - Indicates that the handshake status is normal 2. failed(2) - Indicates that the handshake status is failed 3. invalid(-1) - Indicates that the query fails or no information is detected " ::= { hwPsGroupExtEntry 15 } hwPsGroupStandbyDetectSwitch OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2), invalid(-1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Function of detecting the forced mode of the standby port in the timedelay protection group for active and standby control boards. Options: 1. enable(1) - Indicates that the detecting function is enable. 2. disable(2) - Indicates that the detecting function is disable. 3. invalid(-1) - Indicates invalid value. During the query operation, when the protection group does not support the detecting function, the value is invalid(-1). When the protection group supports the detecting function, the default value is disable(2). " ::= { hwPsGroupExtEntry 16 } hwPsGroupPortStateTimerOffTime OBJECT-TYPE SYNTAX Integer32(-1 | 1..1200) MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the closing time of portstate protect group active port, when the active port is offline. The allowable value is from 1 to 1200 seconds. The invalid value is -1. Default: 5 Unit: second " ::= { hwPsGroupExtEntry 17 } hwPsGroupPortStateTimerOnTime OBJECT-TYPE SYNTAX Integer32(-1 | 1..1200) MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the opening time of portstate protect group active port, after closing time for the active port offline. The allowable value is from 1 to 1200 seconds. The invalid value is -1. Default: 90 Unit: second " ::= { hwPsGroupExtEntry 18 } hwPsGroupStandbyPortSuppressFlappingSwitch OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1), invalid(-1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Function of flapping suppression of the standby port in the timedelay protection group. Options: 1. disable(0) - Indicates that the flapping suppression function is disable. 2. enable(1) - Indicates that the flapping suppression function is enable. 3. invalid(-1) - Indicates invalid value. During the query operation, when the protection group does not support the flapping suppression function, the value is invalid(-1). When the protection group supports the flapping suppression function, the default value is disable(0). " ::= { hwPsGroupExtEntry 19 } hwPsGroupStandbyPortRssiMonitoringPolicySwitch OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1), invalid(-1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Function of RSSI detect of the standby port in the protection group. Options: 1. disable(0) - Indicates that the RSSI detect function is disable. 2. enable(1) - Indicates that the RSSI detect function is enable. 3. invalid(-1) - Indicates invalid value. During the query operation, when the protection group does not support the RSSI detect function, the value is invalid(-1). When the protection group supports the RSSI detect function, the default value is disable(0). " ::= { hwPsGroupExtEntry 20 } hwPsGroupStandbyPortRssiMonitoringInterval OBJECT-TYPE SYNTAX Integer32 (-1 | 4..96) UNITS "15 minute" MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the interval of standby port RSSI detect, the default value is 8. A special value of -1 indicates the RSSI detect function of this protection group is disabled during the query operation. " ::= { hwPsGroupExtEntry 21 } hwPsGroupStandbyPortRssiMonitoringLowRssiAlarmThreshold OBJECT-TYPE SYNTAX Integer32 (-9900..10000 | 2147483647) UNITS "0.01 dBm" MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the threshold of standby port RSSI min value. It ranges from -9900 to 10000 units of 0.01 dBm, the default value is -2800. A special value of 0x7FFFFFFE (2147483646) indicates the RSSI detect function of this protection group is disabled during the query operation. " ::= { hwPsGroupExtEntry 22 } hwPsGroupLoadBalanceTable OBJECT-TYPE SYNTAX SEQUENCE OF HwPsGroupLoadBalanceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Protect group load balance configuration table. The indexes of this table are hwPgGroupId and hwPsGroupLoadBalanceInstance. " ::= { hwProtection 8 } hwPsGroupLoadBalanceEntry OBJECT-TYPE SYNTAX HwPsGroupLoadBalanceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Protect group load balance configuration table. The indexes of this entry are hwPgGroupId and hwPsGroupLoadBalanceInstance. " INDEX { hwPgGroupId, hwPsGroupLoadBalanceInstance} ::= { hwPsGroupLoadBalanceTable 1 } HwPsGroupLoadBalanceEntry ::= SEQUENCE { hwPsGroupLoadBalanceInstance Integer32, hwPsGroupLoadBalanceRole INTEGER } hwPsGroupLoadBalanceInstance OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION " Instance ID. From 0 to the max instance ID. The max intance ID is different for products. " ::= { hwPsGroupLoadBalanceEntry 1 } hwPsGroupLoadBalanceRole OBJECT-TYPE SYNTAX INTEGER { onwork(1), onprotect(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " Load balance configuration of instance in each protect group. Default value is on-work. Options: 1. onwork(1) -forward through work member on load-balance state 2. onprotect(2) -forward through protect member on load-balance state If not on load-balance state, all instance forward through active member. " ::= { hwPsGroupLoadBalanceEntry 2 } hwSmartLinkFlushRecvPortTable OBJECT-TYPE SYNTAX SEQUENCE OF HwSmartLinkFlushRecvPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Describes the configuration information for receiving the flush packet. The index of this table is ifIndex. " ::= { hwProtection 9 } hwSmartLinkFlushRecvPortEntry OBJECT-TYPE SYNTAX HwSmartLinkFlushRecvPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Describes the configuration information for receiving the flush packet. The index of this entry is ifIndex. " INDEX {ifIndex} ::= { hwSmartLinkFlushRecvPortTable 1 } HwSmartLinkFlushRecvPortEntry ::= SEQUENCE { hwSmartLinkFlushRecvCtrlVlan Integer32, hwSmartLinkFlushRecvPassword OCTET STRING } hwSmartLinkFlushRecvCtrlVlan OBJECT-TYPE SYNTAX Integer32(-1 | 1..4093) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the control VLAN of the received flush packet. Range: -1, 1-4093 -1 indicates deleting the control VLAN. " ::= { hwSmartLinkFlushRecvPortEntry 1 } hwSmartLinkFlushRecvPassword OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..16)) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the authentication password of the received flush packet. When the value of this leaf is a null character string, it indicates that no password authentication is required. All characters in the password must be ASCII codes from 0x20 to 0x7E. " ::= { hwSmartLinkFlushRecvPortEntry 2 } hwSmartLinkFlushRecvStatistics OBJECT IDENTIFIER ::= { hwProtection 10 } hwSmartLinkFlushRecvLastIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the index of the last port that receives the flush packet. Its calculation is the same as that of ifIndex. -1 indicates invalid value. " ::= { hwSmartLinkFlushRecvStatistics 1 } hwSmartLinkFlushRecvLastTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the last time when the flush packet is received. The value format of this leaf is an 8-byte hexadecimal number. Among the eight bytes, the first and second bytes indicates the year, the third byte indicates the month, the fourth byte indicates the day, the fifth byte indicates the hour, the sixth byte indicates the minute, the seventh byte indicates 1/10 second and is fixedly filled with 0, and the eighth, ninth, and tenth bytes indicate the time zone. For example, if the time is 2010-2-8, 10:11:38 in GMT+ 8, the value is 0x07 0xDA 0x02 0x08 0x0A 0x0B 0x26 0x00 0x2B 0x08 0x00. Because the time range that can be identified by the device is from 1970-01-01 00:00 to 2099-12-31 23:59, the time set for this leaf must within this time range. The first 8-byte hexadecimal value is 0, it indicates invalid value. " ::= { hwSmartLinkFlushRecvStatistics 2 } hwSmartLinkFlushRecvLastSrcMacAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the last source MAC address that receives the flush packet. The 00:00:00:00:00:00 MAC address indicates invalid value. " ::= { hwSmartLinkFlushRecvStatistics 3 } hwSmartLinkFlushRecvLastCtrlVlan OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the last control VLAN that receives the flush packet. Range: -1, 1-4093 -1 indicates invalid value. " ::= { hwSmartLinkFlushRecvStatistics 4 } hwMonitorLinkGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF HwMonitorLinkGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Used for configuring a monitor link group. The index of this table is hwMonitorLinkGroupId. " ::= { hwProtection 11 } hwMonitorLinkGroupEntry OBJECT-TYPE SYNTAX HwMonitorLinkGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Used for configuring a monitor link group. The index of this entry is hwMonitorLinkGroupId. " INDEX {hwMonitorLinkGroupId } ::= { hwMonitorLinkGroupTable 1 } HwMonitorLinkGroupEntry ::= SEQUENCE { hwMonitorLinkGroupId Integer32, hwMonitorLinkGroupRecoverTime Integer32, hwMonitorLinkGroupState INTEGER, hwMonitorLinkGroupRowStatus RowStatus } hwMonitorLinkGroupId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Indicates the index of the monitored group. When the value of hwMonitorLinkGroupId is -1 or 65535, it indicates that an available monitoring group ID is automatically allocated. " ::= { hwMonitorLinkGroupEntry 1 } hwMonitorLinkGroupRecoverTime OBJECT-TYPE SYNTAX Integer32 (3..60) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the recovery time of the monitored group. Range: 3-60 Default: 3 Unit: second " ::= { hwMonitorLinkGroupEntry 2 } hwMonitorLinkGroupState OBJECT-TYPE SYNTAX INTEGER { idle(1), normal(2), failed(3), recovering(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the status of the monitored group. Options: 1. idle(1) -the status of a monitored group is idle 2. normal(2) -the status of a monitored group is normal 3. failed(3) -the status of a monitored group is failed 4. recovering(4) -the status of a monitored group is recovering " ::= { hwMonitorLinkGroupEntry 3 } hwMonitorLinkGroupRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the row status, used for creating or deleting a monitored group. createAndGo(4) and destroy(6) are supported. During the query operation, active(1) is always returned for this leaf. Options: 1. active(1) -when this leaf is queried, the value is fixed to active(1). 2. createAndGo(4) -create a monitored group 3. destroy(6) -delete a monitored group To create a monitored group, set hwMonitorLinkGroupRowStatus to createAndGo(4) and perform the set operation. hwMonitorLinkGroupRecoverTime is optional. To delete a monitored group, set hwMonitorLinkGroupRowStatus to destroy(6) and perform the set operation. " ::= { hwMonitorLinkGroupEntry 10 } hwMonitorLinkUpLinkTable OBJECT-TYPE SYNTAX SEQUENCE OF HwMonitorLinkUpLinkEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Used for configuring a monitor up link port. The index of this table is hwMonitorLinkUpLinkIfIndex. " ::= { hwProtection 12 } hwMonitorLinkUpLinkEntry OBJECT-TYPE SYNTAX HwMonitorLinkUpLinkEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Used for configuring a monitor up link port. The index of this entry is hwMonitorLinkUpLinkIfIndex. " INDEX {hwMonitorLinkGroupId} ::= { hwMonitorLinkUpLinkTable 1 } HwMonitorLinkUpLinkEntry ::= SEQUENCE { hwMonitorLinkUpLinkIfIndex Integer32, hwMonitorLinkUpLinkStatus INTEGER, hwMonitorLinkUpLinkUpTime DateAndTime, hwMonitorLinkUpLinkDownTime DateAndTime } hwMonitorLinkUpLinkIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the index of the upstream port of the monitored group. Its calculation is the same as that of ifIndex. When the value of this leaf is -1, it indicates that no upstream port exists. " ::= { hwMonitorLinkUpLinkEntry 1 } hwMonitorLinkUpLinkStatus OBJECT-TYPE SYNTAX INTEGER { linkUp(1), linkDown(2), invalid(-1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the status of the upstream port of the monitored group. Options: 1. linkUp(1) -the status of the upstream port of the monitored group is link up 2. linkDown(2) -the status of the upstream port of the monitored group is link down 3. invalid(-1) -indicates the status of the upstream port is invalid " ::= { hwMonitorLinkUpLinkEntry 2 } hwMonitorLinkUpLinkUpTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the last time when the upstream port of the monitored groups is up. The value format of this leaf is an 8-byte hexadecimal number. Among the eight bytes, the first and second bytes indicates the year, the third byte indicates the month, the fourth byte indicates the day, the fifth byte indicates the hour, the sixth byte indicates the minute, the seventh byte indicates 1/10 second and is fixedly filled with 0, and the eighth, ninth, and tenth bytes indicate the time zone. For example, if the time is 2010-2-8, 10:11:38 in GMT+ 8, the value is 0x07 0xDA 0x02 0x08 0x0A 0x0B 0x26 0x00 0x2B 0x08 0x00. Because the time range that can be identified by the device is from 1970-01-01 00:00 to 2099-12-31 23:59, the time set for this leaf must within this time range. The first 8-byte hexadecimal value is 0, it indicates invalid value. " ::= { hwMonitorLinkUpLinkEntry 3 } hwMonitorLinkUpLinkDownTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the last time when the upstream port of the monitored groups is down. The value format of this leaf is an 8-byte hexadecimal number. Among the eight bytes, the first and second bytes indicates the year, the third byte indicates the month, the fourth byte indicates the day, the fifth byte indicates the hour, the sixth byte indicates the minute, the seventh byte indicates 1/10 second and is fixedly filled with 0, and the eighth, ninth, and tenth bytes indicate the time zone. For example, if the time is 2010-2-8, 10:11:38 in GMT+ 8, the value is 0x07 0xDA 0x02 0x08 0x0A 0x0B 0x26 0x00 0x2B 0x08 0x00. Because the time range that can be identified by the device is from 1970-01-01 00:00 to 2099-12-31 23:59, the time set for this leaf must within this time range. The first 8-byte hexadecimal value is 0, it indicates invalid value. " ::= { hwMonitorLinkUpLinkEntry 4 } hwMonitorLinkDownLinkTable OBJECT-TYPE SYNTAX SEQUENCE OF HwMonitorLinkDownLinkEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Used for configuring a monitor down link port. The indexes of this table are hwMonitorLinkGroupId and hwMonitorLinkDownLinkIfIndex. " ::= { hwProtection 13 } hwMonitorLinkDownLinkEntry OBJECT-TYPE SYNTAX HwMonitorLinkDownLinkEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Used for configuring a monitor down link port. The indexes of this entry are hwMonitorLinkGroupId and hwMonitorLinkDownLinkIfIndex. " INDEX {hwMonitorLinkGroupId, hwMonitorLinkDownLinkId} ::= { hwMonitorLinkDownLinkTable 1 } HwMonitorLinkDownLinkEntry ::= SEQUENCE { hwMonitorLinkDownLinkId Integer32, hwMonitorLinkDownLinkIfIndex Integer32, hwMonitorLinkDownLinkStatus INTEGER, hwMonitorLinkDownLinkUpTime DateAndTime, hwMonitorLinkDownLinkDownTime DateAndTime, hwMonitorLinkDownLinkOntId Integer32, hwMonitorLinkDownLinkOntPortId Integer32, hwMonitorLinkDownRowStatus RowStatus } hwMonitorLinkDownLinkId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the index of the downlink of the monitored group. Range: 0-511. When the value of hwMonitorLinkDownLinkId is -1 or 65535, it indicates that an available downlink ID is automatically allocated. " ::= { hwMonitorLinkDownLinkEntry 1 } hwMonitorLinkDownLinkIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the index of the downstream port of the monitored group. " ::= { hwMonitorLinkDownLinkEntry 2 } hwMonitorLinkDownLinkStatus OBJECT-TYPE SYNTAX INTEGER { linkUp(1), linkDown(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the status of the downstream port of the monitored group. Options: 1. linkUp(1) -the status of the downstream port of the monitored group is link up 2. linkDown(2) -the status of the downstream port of the monitored group is link down " ::= { hwMonitorLinkDownLinkEntry 3 } hwMonitorLinkDownLinkUpTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the last time when the downstream port of the monitored groups is up. The value format of this leaf is an 8-byte hexadecimal number. Among the eight bytes, the first and second bytes indicates the year, the third byte indicates the month, the fourth byte indicates the day, the fifth byte indicates the hour, the sixth byte indicates the minute, the seventh byte indicates 1/10 second and is fixedly filled with 0, and the eighth, ninth, and tenth bytes indicate the time zone. For example, if the time is 2010-2-8, 10:11:38 in GMT+ 8, the value is 0x07 0xDA 0x02 0x08 0x0A 0x0B 0x26 0x00 0x2B 0x08 0x00. Because the time range that can be identified by the device is from 1970-01-01 00:00 to 2099-12-31 23:59, the time set for this leaf must within this time range. The first 8-byte hexadecimal value is 0, it indicates invalid value. " ::= { hwMonitorLinkDownLinkEntry 4 } hwMonitorLinkDownLinkDownTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the last time when the downstream port of the monitored groups is down. The value format of this leaf is an 8-byte hexadecimal number. Among the eight bytes, the first and second bytes indicates the year, the third byte indicates the month, the fourth byte indicates the day, the fifth byte indicates the hour, the sixth byte indicates the minute, the seventh byte indicates 1/10 second and is fixedly filled with 0, and the eighth, ninth, and tenth bytes indicate the time zone. For example, if the time is 2010-2-8, 10:11:38 in GMT+ 8, the value is 0x07 0xDA 0x02 0x08 0x0A 0x0B 0x26 0x00 0x2B 0x08 0x00. Because the time range that can be identified by the device is from 1970-01-01 00:00 to 2099-12-31 23:59, the time set for this leaf must within this time range. The first 8-byte hexadecimal value is 0, it indicates invalid value. " ::= { hwMonitorLinkDownLinkEntry 5 } hwMonitorLinkDownLinkOntId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the Ont ID of the downstream port of the monitored group. This node is not specified or is set to -1 if a no-xPON ONT Ethernet port is used for indicating a downlink. " ::= { hwMonitorLinkDownLinkEntry 6 } hwMonitorLinkDownLinkOntPortId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the Ont port ID of the downstream port of the monitored group. This node is not specified or is set to -1 if a no-xPON ONT Ethernet port is used for indicating a downlink. " ::= { hwMonitorLinkDownLinkEntry 7 } hwMonitorLinkDownRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the row status, used for creating or deleting a monitored downlink. createAndGo(4) and destroy(6) are supported. During the query operation, active(1) is always returned for this leaf. Options: 1. active(1) -when this leaf is queried, the value is fixed to active(1). 2. createAndGo(4) -create a monitored downlink 3. destroy(6) -delete a monitored downlink To create a monitored downlink, specify hwMonitorLinkDownLinkIfIndex, set hwMonitorLinkDownRowStatus to createAndGo(4) and perform the set operation. To delete a monitored downlink, set hwMonitorLinkGroupRowStatus to destroy(6) and perform the set operation. " ::= { hwMonitorLinkDownLinkEntry 10 } hwPsOntMemberTable OBJECT-TYPE SYNTAX SEQUENCE OF HwPsOntMemberEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Member table for ONT. The objects in hwPsOntMemberTable are used for performing operations associated with the ONT protection group member. The operations include adding and deleting a member, forced or manual switchover, locking a member, and querying the information about a member. This table determines a protection group member by the ifIndex and hwPgOntId of the member. The indexes of this table are IfIndex, hwOntId and hwPgGroupId. When IfIndex = -1, hwOntId = -1, walk all member of hwPgGroupId. " ::= { hwProtection 14 } hwPsOntMemberEntry OBJECT-TYPE SYNTAX HwPsOntMemberEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Member table for ONT. The objects in hwPsOntMemberTable are used for performing operations associated with the ONT protection group member. The operations include adding and deleting a member, forced or manual switchover, locking a member, and querying the information about a member. This table determines a protection group member by the ifIndex and hwPgOntId of the member. The indexes of this entry are IfIndex, hwOntId and hwPgGroupId. When IfIndex = -1, hwOntId = -1, walk all member of hwPgGroupId. " INDEX { ifIndex, hwPgOntId, hwPgGroupId } ::= { hwPsOntMemberTable 1 } HwPsOntMemberEntry ::= SEQUENCE { hwPgOntId Integer32, hwPgOntMemberRole INTEGER, hwPgOntMemberOper INTEGER, hwPgOntMemberStatus INTEGER, hwPgOntDstMemberPort Integer32, hwPgOntDstMemberOnt Integer32, hwPgOntMemberRunningState INTEGER, hwPgOntMemberPeerMemberPort Integer32, hwPgOntMemberPeerMemberOnt Integer32, hwPgOntMemberRowStatus RowStatus } hwPgOntId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION " Ont ID. " ::= { hwPsOntMemberEntry 1 } hwPgOntMemberRole OBJECT-TYPE SYNTAX INTEGER { work(1), protect(2) } MAX-ACCESS read-create STATUS current DESCRIPTION " Member role. Options: 1. work(1) -Working member 2. protect(2) -Protection member " ::= { hwPsOntMemberEntry 2 } hwPgOntMemberOper OBJECT-TYPE SYNTAX INTEGER { manualswitch(1), undomanualswitch(2), forceswitch(3), undoforceswitch(4), lockout(5), unlockout(6), exerciseswitch(7), undoexerciseswitch(8) } MAX-ACCESS read-write STATUS current DESCRIPTION " Member operation: Options: 1. manualswitch(1) -manual-switch The manual switchover can be performed only when the protection group is enabled, no member is locked, no forced switchover is performed, and no member is faulty 2. undomanualswitch(2)-undo-manual-switch 3. forceswitch(3) -force-switch The forced switchover can be performed only when the protection group is enabled and no member is locked. When the command for this operation is issued, the switchover is performed whenever the specified target member is normal 4. undoforceswitch(4) -undo force-switch 5. lockout(5) -The protection group member is locked. After being locked, the protection group member does not participate in protection group switchover 6. unlockout(6) -The protection group member is unlocked. After being unlocked, the protection group member continues to participate in protection group switchover 7. exerciseswitch(7) --exercise-switch The exercise switchover can be performed only when the protection group is enabled, no member is locked, no other type switchover is performed, and no member is faulty When the command for this operation is issued, no actual switchover is performed, only members's status is changed 8. undoexerciseswitch(8)-undo exercise-switch Reading this object will result in implementation-specific results. " ::= { hwPsOntMemberEntry 3 } hwPgOntMemberStatus OBJECT-TYPE SYNTAX INTEGER { null(1), manualswitchsrc(2), manualswitchdst(3), forceswitchsrc(4), forceswitchdst(5), autoswitchsrc(6), autoswitchdst(7), lockout(8), exerciseswitch(9) } MAX-ACCESS read-only STATUS current DESCRIPTION " Member status. Options: 1. null(1) -Null operation 2. manualswitchsrc(2) -Source member of the manual switchover 3. manualswitchdst(3) -Target member of the manual switchover 4. forceswitchsrc(4) -Source member of the forced switchover 5. forceswitchdst(5) -Target member of the forced switchover 6. autoswitchsrc(6) -Source member of the automatic switchover 7. autoswitchdst(7) -Target member of the automatic switchover 8. lockout(8) -Locked 9. exerciseswitch(9) -Exercise switched " ::= { hwPsOntMemberEntry 4 } hwPgOntDstMemberPort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION " Target member ifindex. Reading this object will result in implementation-specific results. " ::= { hwPsOntMemberEntry 5 } hwPgOntDstMemberOnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION " Target member ontId. Reading this object will result in implementation-specific results. " ::= { hwPsOntMemberEntry 6 } hwPgOntMemberRunningState OBJECT-TYPE SYNTAX INTEGER { active(1), standby(2), adding(3), deleting(4), switching(5) } MAX-ACCESS read-only STATUS current DESCRIPTION " Member status. Options: 1. active(1) -State of the member that carries the service 2. standby(2) -State of the member that does not carry the service 3. adding(3) -Adding 4. deleting(4) -Deleting 5. switching(5)-Switching " ::= { hwPsOntMemberEntry 7 } hwPgOntMemberPeerMemberPort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " Peer member ifindex. " ::= { hwPsOntMemberEntry 8 } hwPgOntMemberPeerMemberOnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " Peer member ontId. " ::= { hwPsOntMemberEntry 9 } hwPgOntMemberRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION " Member rowstatus. Options: 1. createAndGo(4) -create a new instance of a conceptual row 2. destroy(6) -delete the instances associated with an existing conceptual row " ::= { hwPsOntMemberEntry 11 } hwPgGroupTraps OBJECT IDENTIFIER ::= { hwProtection 15 } hwPgGroupCommonTraps OBJECT IDENTIFIER ::= { hwPgGroupTraps 1 } hwPgGroupCommonTrapsPrefix OBJECT IDENTIFIER ::= { hwPgGroupCommonTraps 0 } hwPgGroupLoadBalanceStateChangeTrap NOTIFICATION-TYPE OBJECTS { hwPgGroupId, hwPsGroupLoadBalanceState } STATUS current DESCRIPTION " This trap is generated when Load balance state of smart link protect group changes. " ::= { hwPgGroupCommonTraps 0 1 } hwProtectionTraps OBJECT IDENTIFIER ::= { hwProtection 16 } hwProtectionCommonTraps OBJECT IDENTIFIER ::= { hwProtectionTraps 1 } hwProtectionCommonTrapsPrefix OBJECT IDENTIFIER ::= { hwProtectionCommonTraps 0 } hwProtectionSwitchTrap NOTIFICATION-TYPE OBJECTS { hwPgGroupId } STATUS current DESCRIPTION "The agent generates this trap when a protect group switchs over." ::= { hwProtectionCommonTrapsPrefix 1 } hwProtectionAlarmTraps OBJECT IDENTIFIER ::= { hwProtectionTraps 2 } hwProtectionAlarmTrapsPrefix OBJECT IDENTIFIER ::= { hwProtectionAlarmTraps 0 } hwProtectionSwitchAlarmTrap NOTIFICATION-TYPE OBJECTS { hwPgGroupId } STATUS current DESCRIPTION "The agent generates this trap when a protect group switchs over." ::= { hwProtectionAlarmTrapsPrefix 1 } hwSmartLinkTraps OBJECT IDENTIFIER ::= { hwProtection 17 } hwSmartLinkCommonTraps OBJECT IDENTIFIER ::= { hwSmartLinkTraps 1 } hwSmartLinkCommonTrapsPrefix OBJECT IDENTIFIER ::= { hwSmartLinkCommonTraps 0 } hwMoniterGroupStateChangeTrap NOTIFICATION-TYPE OBJECTS { hwMonitorLinkGroupId, hwMonitorLinkGroupState } STATUS current DESCRIPTION " This trap is generated when the state of moniter link group changes. " ::= { hwSmartLinkCommonTraps 0 1 } hwPsDpGlobalConfig OBJECT IDENTIFIER ::= { hwProtection 18 } hwPsDpSyncSwitch OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The synchronous switch of dual-parenting. Options: 1. enable(1) - Indicates that the dual parenting synchronous switch is enable. 2. disable(2) - Indicates that the dual parenting synchronous switch is disable. " ::= { hwPsDpGlobalConfig 1 } hwPsDpLocalNodeIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the IP address of dual parenting local node. The IP address can not be multicast IP 224.0.0.0-239.255.255.255. The IP address 255.255.255.255 indicates that the IP address is deleted. " ::= { hwPsDpGlobalConfig 2 } hwPsDpLocalNodeTcpPort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the TCP port ID of dual parenting local node. Range: 1024-49151 Default: 6076 " ::= { hwPsDpGlobalConfig 3 } hwPsDpLocalNodeCommunicationKey OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..16)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the communication key of dual parenting local node. " ::= { hwPsDpGlobalConfig 4 } hwPsDpPeerNodeTable OBJECT-TYPE SYNTAX SEQUENCE OF HwPsDpPeerNodeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table is used to configure the information about the dual parenting peer node. The index of this table is hwPsDpPeerNodeNameIndex. " ::= { hwProtection 19 } hwPsDpPeerNodeEntry OBJECT-TYPE SYNTAX HwPsDpPeerNodeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table is used to configure the information about the dual parenting peer node. The index of this entry is hwPsDpPeerNodeNameIndex. " INDEX { IMPLIED hwPsDpPeerNodeNameIndex} ::= { hwPsDpPeerNodeTable 1 } HwPsDpPeerNodeEntry ::= SEQUENCE { hwPsDpPeerNodeNameIndex OCTET STRING, hwPsDpPeerNodeIpAddress IpAddress, hwPsDpPeerNodeTcpPort Integer32, hwPsDpPeerNodeCommunicationKey OCTET STRING, hwPsDpPeerNodeConnectStatus INTEGER, hwPsDpPeerNodeRowStatus RowStatus } hwPsDpPeerNodeNameIndex OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..15)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the dual parenting peer node name. " ::= { hwPsDpPeerNodeEntry 1 } hwPsDpPeerNodeIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the IP address of dual parenting peer node. The IP address can not be multicast IP 224.0.0.0-239.255.255.255 or broadcast IP 255.255.255.255. " ::= { hwPsDpPeerNodeEntry 2 } hwPsDpPeerNodeTcpPort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the TCP port ID of dual parenting peer node. Range: 1024-49151 " ::= { hwPsDpPeerNodeEntry 3 } hwPsDpPeerNodeCommunicationKey OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..16)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the communication key of dual parenting peer node. " ::= { hwPsDpPeerNodeEntry 4 } hwPsDpPeerNodeConnectStatus OBJECT-TYPE SYNTAX INTEGER { normal(1), failed(2), invalid(-1) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the connect status between the dual parenting local node and peer node. Options: 1. normal(1) - Indicates that the connect status is normal 2. failed(2) - Indicates that the connect status is failed 3. invalid(-1) - Indicates that the query fails or no information is detected " ::= { hwPsDpPeerNodeEntry 5 } hwPsDpPeerNodeRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The hwPsDpPeerNodeRowStatus is used to create a new row or to modify or delete an existing row in this table. Options: 1. createAndGo(4) -create a new instance of a conceptual row 2. destroy(6) -delete the instances associated with an existing conceptual row " ::= { hwPsDpPeerNodeEntry 6 } END