-- ============================================================================ -- Copyright (C) 2012 by HUAWEI TECHNOLOGIES. All rights reserved. -- Description: The MIB is used for defining HUAWEI NGADSL LINE MIB objects, which -- expand from RFC4706 ADSL2-LINE MIB. -- Reference: -- Version: V1.25 -- ============================================================================ HUAWEI-NGADSL-LINE-MIB DEFINITIONS ::= BEGIN IMPORTS huaweiUtility FROM HUAWEI-MIB ifIndex FROM IF-MIB adsl2, adsl2PMLCurrUnit, adsl2PMLHist15MUnit, adsl2PMLHist15MInterval, adsl2PMLHistInit15MInterval, adsl2PMLHist1DUnit, adsl2PMLHist1DInterval, adsl2PMLHistinit1DInterval, adsl2ChannelStatusEntry, adsl2ChAlarmConfProfileEntry, adsl2PMLineCurrEntry, adsl2PMLineCurrInitEntry, adsl2PMChCurrEntry, adsl2LineConfProfEntry, adsl2SCStatusEntry, adsl2LineEntry, adsl2ChStatusUnit, adsl2PMChCurrUnit, adsl2PMChHist15MUnit, adsl2PMChHist15MInterval, adsl2PMChHist1DUnit, adsl2PMChHist1DInterval, adsl2LConfProfProfileName, adsl2SCStatusDirection, adsl2LineAlarmConfProfileName, adsl2ChAlarmConfProfileName, adsl2ChConfProfProfileName, adsl2LineCmndConfLdsfFailReason, adsl2ChStatusActDataRate, adsl2ChStatusChannelNum FROM ADSL2-LINE-MIB -- [-rfc4706] MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF MODULE-IDENTITY, Gauge32, OBJECT-TYPE, Unsigned32, Counter32, Integer32, NOTIFICATION-TYPE FROM SNMPv2-SMI TEXTUAL-CONVENTION, DateAndTime FROM SNMPv2-TC HCPerfIntervalThreshold, HCPerfTimeElapsed FROM HC-PerfHist-TC-MIB -- [RFC3705] hwFrameIndex, hwSlotIndex, hwPortIndex, hwPortOperStatus,hwPortPrimaryStatus,hwPortSecondaryStatus FROM HUAWEI-DEVICE-MIB; -- adsl2MIB huawei private mib hwadsl2MIB MODULE-IDENTITY LAST-UPDATED "201207200000Z" ORGANIZATION "Huawei Technologies Co.,Ltd." CONTACT-INFO "Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China Website: http://www.huawei.com Email: support@huawei.com " DESCRIPTION "The MIB is used for defining HUAWEI NGADSL LINE MIB objects, which expand from RFC4706 ADSL2-LINE MIB. " -- Revision history REVISION "201207200000Z" DESCRIPTION "V1.25, Delete unnecessary en dashes." REVISION "201203080000Z" DESCRIPTION "V1.24, Modify the data type of the trap node hwadsl2LineTemplateID. Modify the defination of the trap node hwAdsl2LinePerformanceStatAlarmTrap, hwAdsl2ChannelPerformanceStatAlarmTrap. Add the leaf nodes in table hwAdsl2TrapsVbOids as follow:hwadsl2LinePMThresholdValue, hwadsl2LinePMCurrentValue, hwadsl2ChPMThresholdValue, hwadsl2ChPMCurrentValue." REVISION "201112050000Z" DESCRIPTION "V1.23, add the definition of the leaf node hwadsl2LineStatusLineRateDs, hwadsl2LineStatusLineRateUs." REVISION "201110150000Z" DESCRIPTION "V1.22, add the definition of the leaf node hwAdsl2LineAlarmConfProfileDyingGaspAlarmSwitch, hwAdsl2LineAlarmConfProfileActiveFailAlarmSwitch." REVISION "201105100000Z" DESCRIPTION "V1.21, add the definition of the leaf node hwadsl2LineStatusLastRetrainInfo for getting the last retrained information." REVISION "201104070000Z" DESCRIPTION "V1.20, modify the leaf name from hwadsl2LineAlarmConfProfileXtucThresh15MinLeftrs to hwadsl2LineAlarmConfProfileXturThresh15MinLeftrs." REVISION "201012220000Z" DESCRIPTION "V1.19, added type Hwadsl2StatusRtxUsed and type Adsl2InitResult for G.998.4 retransmission function. Added the leaf node for G.998.4 retransmission function. " REVISION "201011160000Z" DESCRIPTION "V1.18, Modify leaf node hwAdsl2ChipsetNotAvailbaleAlarmTrap to hwAdsl2ChipsetNotAvailableAlarmTrap." REVISION "201009270000Z" DESCRIPTION "V1.17, modify the description of the whole MIB file." REVISION "201009070000Z" DESCRIPTION "V1.16, modify the description of the node hwadsl2LineStatusPcbUsInfo. Modify the data type of the trap node hwAdsl2SwitchResult. Modify the data type of the trap node hwadsl2LineCmndConfLdsfResult. " REVISION "201007080000Z" DESCRIPTION "V1.15, Modify chinese character." REVISION "201005200000Z" DESCRIPTION "V1.14, changes in this revision: Modify the definition of the trap node hwAdsl2PortStatusChangeTrap. " REVISION "201005080000Z" DESCRIPTION "V1.13, changes in this revision: Modify the definition of the trap node hwAdsl2ChannelPerformanceStatAlarmTrap. Modify the value range of the leaf node hwadsl2LConfProfL3Time. Add the definition of the leaf node hwadslabrmodecfgCfg for changing abr-calculation mode. " REVISION "201003180000Z" DESCRIPTION "V1.12, changes in this revision: Add leaf node hwadsl2LineCmndConfLdsfResult for indicating the result of test. Modify leaf node hwadsl2Dynamicprofile, hwadsl2DynamicprofileInfo, hwadslmodecfg. Modify the definition of the trap node hwAdsl2DeltOperResultTrap. Modify the description of the table hwadsl2PMLineCurrInitTable, hwadsl2LineTable, hwadsl2SCStatusTable. Modify the description of the leaf node hwAdsl2ModeSwitchResultTrap, hwAdsl2AdminModeTrap, hwAdsl2DeltOperResultTrap. Add leaf node hwadsl2PMLCurr15MLofs, hwadsl2PMLCurr15MLols, hwadsl2PMLCurr15MLops, hwadsl2PMLCurr1DayLofs, hwadsl2PMLCurr1DayLols, hwadsl2PMLCurr1DayLops, hwadsl2PMLEverBeforeLofs, hwadsl2PMLEverBeforeLols, hwadsl2PMLEverBeforeLops, hwadsl2PMLHist15MLofs, hwadsl2PMLHist15MLols, hwadsl2PMLHist15MLops, hwadsl2PMLHist1DayLofs, hwadsl2PMLHist1DayLols, hwadsl2PMLHist1DayLops for performance monitoring. " REVISION "201002280000Z" DESCRIPTION "V1.11, changes in this revision: Modify the definition of the trap node and modify the description of the node. " REVISION "201002120000Z" DESCRIPTION "V1.10, changes in this revision: Add leaf node hwadsl2PMLCurr15MStartTime, hwadsl2PMLCurr1DayStartTime, hwadsl2PMLHist15MStartTime, hwadsl2PMLHist1DayStartTime, hwadsl2PMLHist1DayStartTime,hwadsl2PMChHist15MStartTime, hwadsl2PMChHist1DStartTime for obtaining current Performance Monitoring results of ADSL2 line. Add table hwadsl2PMLineCurrInitTable,hwadsl2PMLineInitHist15MinTable,hwadsl2PMLineInitHist1DayTable for performance monitoring. " REVISION "201001120000Z" DESCRIPTION "V1.09, Add the definition of the trap node." REVISION "200912210000Z" DESCRIPTION "V1.08, changes in this revision: Add Huawei private leaf node. " REVISION "200911210000Z" DESCRIPTION "V1.07, changes in this revision: Add leaf node hwadslLConfProfAdslMode for changing abr-calculation mode. " REVISION "200902280000Z" DESCRIPTION "V1.03, changes in this revision: Add hwadsl2LineConfProfTable hwadsl2ChConfProfileTable hwadsl2PMLineCurrTable hwadsl2PMLineHist15MinTable hwadsl2PMLineHist1DayTable for impulse noise performance monitoring parameters. " REVISION "200710180000Z" DESCRIPTION "V1.00, Initial version." ::= { huaweiUtility 138 } -- Textual Conventions Adsl2SymbolProtection ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Attributes with this syntax are configuration parameters that reference the minimum-length impulse noise protection (INP) in terms of number of symbols. The possible values are: noProtection (i.e., INP not required), halfSymbol (i.e., INP length is 1/2 symbol), and 1-16 symbols in steps of 1 symbol. Options: 1. noProtection(1) - Indicates that the INP value is 0 2. halfSymbol(2) - Indicates that the INP value is 0.5 3. singleSymbol(3) - Indicates that the INP value is 1 4. twoSymbols(4) - Indicates that the INP value is 2 5. threeSymbols(5) - Indicates that the INP value is 3 6. fourSymbols(6) - Indicates that the INP value is 4 7. fiveSymbols(7) - Indicates that the INP value is 5 8. sixSymbols(8) - Indicates that the INP value is 6 9. sevenSymbols(9) - Indicates that the INP value is 7 10.eightSymbols(10) - Indicates that the INP value is 8 11.nineSymbols(11) - Indicates that the INP value is 9 12.tenSymbols(12) - Indicates that the INP value is 10 13.elevenSymbols(13) - Indicates that the INP value is 11 14.twelveSymbols(14) - Indicates that the INP value is 12 15.thirteeSymbols(15) - Indicates that the INP value is 13 16.fourteenSymbols(16) - Indicates that the INP value is 14 17.fifteenSymbols(17) - Indicates that the INP value is 15 18.sixteenSymbols(18) - Indicates that the INP value is 16 " SYNTAX INTEGER { noProtection(1), halfSymbol(2), singleSymbol(3), twoSymbols(4), threeSymbols(5), fourSymbols(6), fiveSymbols(7), sixSymbols(8), sevenSymbols(9), eightSymbols(10), nineSymbols(11), tenSymbols(12), elevenSymbols(13), twelveSymbols(14), thirteeSymbols(15), fourteenSymbols(16), fifteenSymbols(17), sixteenSymbols(18) } Adsl2TrellisMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enable and disable the trellis mode. This default value is enabled(2). Options: 1. disable(1) - Disable the trellis mode 2. enable(2) - Enable the trellis mode " SYNTAX INTEGER { disable(1), enable(2) } Adsl2BitSwap ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enable and disable the bit swap upstream or downstream of a line. Options: 1. disable(1) - Disable the bit swap upstream or downstream of a line 2. enable(2) - Enable the bit swap upstream or downstream of a line " SYNTAX INTEGER { disable(1), enable(2) } Adsl2DpboEpsd ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This is a structure that represents up to 16 PSD Mask breakpoints. Each breakpoint occupies 3 octets: The first two octets hold the index of the sub-carrier associated with the breakpoint. The third octet holds the PSD reduction at the breakpoint from 0 (0dBm/Hz) to 255 (-127.5dBm/Hz) using units of 0.5dBm/Hz.Valid values are in the range 0 to 190 (0 to -95dBm/Hz). Options: 1. disable(1) 2. enable(2) " SYNTAX OCTET STRING (SIZE(0..48)) Adsl2CfgMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The configured ADSL management mode. Options: 1. rfc2662(1) - Management model based on RFC2662 and RFC3440 2. rfc4706(2) - Management model based on RFC4706 3. tr165(3) - Management model based on TR-165 " SYNTAX INTEGER { rfc2662(1), rfc4706(2), tr165(3) } Adsl2DataPathMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The channel data path mode. Options: 1. atm(1) - ATM data path 2. ptm(2) - PTM data path 3. both(3) - AMT and PTM data path " SYNTAX INTEGER { atm(1), ptm(2), both(3) } Adsl2PhyRControl ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "To enable or disable the retransmission function. Options: 1. enable(1) - Enable the retransmission function 2. disable(2) - Disable the retransmission function " SYNTAX INTEGER { enable(1), disable(2) } Adsl2StatusRtxUsed ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This parameter specifies whether G.998.4 retransmission is used in a given transmit direction. Options: 1. rtxInuse(1) - RTX in use 2. rtxUnusedModeForbidden(2) - RTX not in use, due to RTX_MODE = FORBIDDEN 3. rtxUnusedNotSupportedXtuc(3) - RTX not in use, due to not supported by the XTU-C 4. rtxUnusedNotSupportedXtur(4) - RTX not in use, due to not supported by the XTU-R 5. rtxUnusedNotSupportedXtucAndXtur(5) - RTX not in use, due to not supported by the XTU-C and XTU-R 6. invalidValue(-1) - Invalid value " SYNTAX INTEGER { rtxInuse(1), rtxUnusedModeForbidden(2), rtxUnusedNotSupportedXtuc(3), rtxUnusedNotSupportedXtur(4), rtxUnusedNotSupportedXtucAndXtur(5), invalidValue(-1) } Hwadsl2InitResult ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Specifies the result of a full initialization attempt; the six possible result values are: noFail(0) - Successful initialization. configError(1) - Configuration failure. configNotFeasible(2) - Configuration details not supported. commFail(3) - Communication failure. noPeerAtu(4) - Peer ATU not detected. otherCause(5) - Other initialization failure reason. ginpNotSelected(6) - G.998.4 Retransmission mode was not selected while RTX_MODE = FORCED or with RTX_MODE = RTX_TESTMODE The values used are as defined in ITU-T G.997.1, paragraph 7.5.1.3" SYNTAX INTEGER { noFail(0), configError(1), configNotFeasible(2), commFail(3), noPeerAtu(4), otherCause(5), ginpNotSelected(6) } Adsl2RfiBand ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This is a string of 4 groups of values in the following structure: Octets 0+1 - Index of start sub-carrier used in the context of a first group. Octets 2+3 - Index of end sub-carrier used in the context of a first group. Octet 4+5 - The psd value configurated in the first group Octets 6-11 - Same, for a 2nd group. This architecture continues until octets 22-23, which are associated with a 4th group. " SYNTAX OCTET STRING (SIZE(0..24)) adsl2Mode OBJECT IDENTIFIER ::= { adsl2 65535 } -- adsl2ChannelStatusTable adsl2ChStatusINP OBJECT-TYPE SYNTAX Unsigned32(0..254) UNITS "0.1 DMT symbol" MAX-ACCESS read-only STATUS current DESCRIPTION "The actual impulse noise protection (INP) on the bearer channel in L0 state. Unit: 0.1 DMT symbol " REFERENCE "ITU-T G.997.1, paragraph 7.5.2.4" ::= { adsl2ChannelStatusEntry 65535 } adsl2ChStatusRSRedundancy OBJECT-TYPE SYNTAX Unsigned32(0..16) UNITS "byte" MAX-ACCESS read-only STATUS current DESCRIPTION "The actual number of Reed-Solomon redundancy bytes per codeword used in the latency path in which the bearer channel is transported. The value is coded in bytes. The value 0 indicates no Reed-Solomon coding. Unit: byte " REFERENCE "ITU-T G.997.1, paragraph 7.5.2.6.2" ::= { adsl2ChannelStatusEntry 65536 } adsl2ChStatusRSSymbols OBJECT-TYPE SYNTAX Unsigned32 UNITS "0.01 DMT symbol" MAX-ACCESS read-only STATUS current DESCRIPTION "The DMT Symbol number per codeword used in the latency path in which the bearer channel is transported. Unit: 0.01 DMT symbol " REFERENCE "ITU-T G.997.1, paragraph 7.5.2.3" ::= { adsl2ChannelStatusEntry 65537 } adsl2ChStatusInterDepth OBJECT-TYPE SYNTAX Unsigned32(1..4096) MAX-ACCESS read-only STATUS current DESCRIPTION "The actual Reed-Solomon codeword size used in the latency path in which the bearer channel is transported. The value ranges from 1 to 4096 by step of 1. The value 1 indicates no interleaving. " REFERENCE "ITU-T G.997.1, paragraph 7.5.2.6.4" ::= { adsl2ChannelStatusEntry 65538 } adsl2ChStatusSymbolLength OBJECT-TYPE SYNTAX Unsigned32(0..65535) UNITS "bit" MAX-ACCESS read-only STATUS current DESCRIPTION "The actual number of bits per symbol assigned to the latency path in which the bearer channel is transported. This value does not include trellis overhead. Unit: bit " REFERENCE "ITU-T G.997.1, paragraph 7.5.2.6.3" ::= { adsl2ChannelStatusEntry 65539 } adsl2ChStatusRSSize OBJECT-TYPE SYNTAX Unsigned32(0..255) UNITS "byte" MAX-ACCESS read-only STATUS current DESCRIPTION "The actual Reed-Solomon codeword size used in the latency path in which the bearer channel is transported. Unit: byte " REFERENCE "ITU-T G.997.1, paragraph 7.5.2.6.1" ::= { adsl2ChannelStatusEntry 65540 } -- adsl2ChAlarmConfProfileTable adsl2ChAlarmConfProfileMonitoringRateDs OBJECT-TYPE SYNTAX Unsigned32(0..200000000) UNITS "bits/second" MAX-ACCESS read-create STATUS current DESCRIPTION "The channel monitoring rate downstream. When the value you set is larger than the value of the rate downstream defined in the channel profile, it will not be successful. The value 0 means that no threshold is specified for the associated counter. This object is defaulted 0. Unit: bits/second " ::= { adsl2ChAlarmConfProfileEntry 65535 } adsl2ChAlarmConfProfileMonitoringRateUs OBJECT-TYPE SYNTAX Unsigned32(0..200000000) UNITS "bits/second" MAX-ACCESS read-create STATUS current DESCRIPTION "The channel monitoring rate upstream. When the value you set is larger than the value of the rate upstream defined in the channel profile, it will not be successful. The value 0 means that no threshold is specified for the associated counter. This object is defaulted 0. Unit: bits/second " ::= { adsl2ChAlarmConfProfileEntry 65536 } -- PM line current counters adsl2PMLEverBeforeFecs OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds since agent reset that there was at least one FEC correction event for one or more bearer channels in this line. This parameter is inhibited during UAS or SES. Unit: seconds " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { adsl2PMLineCurrEntry 65535 } adsl2PMLEverBeforeEs OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds since agent reset that there was: ATU-C: CRC-8 >= 1 for one or more bearer channels OR LOS >= 1 OR SEF >= 1 OR LPR >= 1 ATU-R: FEBE >= 1 for one or more bearer channels OR LOS-FE >= 1 OR RDI >= 1 OR LPR-FE >= 1. This parameter is inhibited during UAS. Unit: seconds " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { adsl2PMLineCurrEntry 65536 } adsl2PMLEverBeforeSes OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds since agent reset that there was: ATU-C: (CRC-8 summed over all bearer channels) >= 18 OR LOS >= 1 OR SEF >= 1 OR LPR >= 1 ATU-R: (FEBE summed over all bearer channels) >= 18 OR LOS-FE >= 1 OR RDI >= 1 OR LPR-FE >= 1 This parameter is inhibited during UAS. Unit: seconds " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { adsl2PMLineCurrEntry 65537 } adsl2PMLEverBeforeLoss OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds since agent reset that there was LOS (or LOS-FE for ATU-R). Unit: seconds " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { adsl2PMLineCurrEntry 65538 } adsl2PMLEverBeforeUas OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds in Unavailability State since agent reset. Unavailability begins at the onset of 10 contiguous severely -errored seconds, and ends at the onset of 10 contiguous seconds with no severely-errored seconds. Unit: seconds " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { adsl2PMLineCurrEntry 65539 } -- PM line init current counters adsl2PMLInitEverBeforeFullInits OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of full initializations attempted on the line (successful and failed) since agent reset. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { adsl2PMLineCurrInitEntry 65535 } adsl2PMLInitEverBeforeFailedFullInits OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of failed full initializations on the line since agent reset. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { adsl2PMLineCurrInitEntry 65536 } adsl2PMLInitEverBeforeShortInits OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of short initializations attempted on the line (successful and failed) since agent reset. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { adsl2PMLineCurrInitEntry 65537 } adsl2PMLInitEverBeforeFailedShortInits OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of failed short initializations on the line since agent reset. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { adsl2PMLineCurrInitEntry 65538 } -- PM channel current counters adsl2PMChEverBeforeCodingViolations OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of CRC-8 (FEBE for ATU-R) anomalies occurring in the channel since agent reset. This parameter is inhibited during UAS or SES. If the CRC is applied over multiple channels, then each related CRC-8 (or FEBE) anomaly should increment each of the counters related to the individual channels. " REFERENCE "ITU-T G.997.1, paragraph 7.2.2" ::= { adsl2PMChCurrEntry 65535 } adsl2PMChEverBeforeCorrectedBlocks OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of FEC (FFEC for ATU-R) anomalies (corrected code words) occurring in the channel since agent reset. This parameter is inhibited during UAS or SES. If the FEC is applied over multiple channels, then each related FEC (or FFEC) anomaly should increment each of the counters related to the individual channels. " REFERENCE "ITU-T G.997.1, paragraph 7.2.2" ::= { adsl2PMChCurrEntry 65536 } -- mode information hwadslmodecfg OBJECT-TYPE SYNTAX Adsl2CfgMode MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to change ADSL management mode. After the mode being changed, system will automatically save data and reboot. Options: 1. rfc2662(1) - Management model based on RFC2662 and RFC3440 2. rfc4706(2) - Management model based on RFC4706 3. tr165(3) - Management model based on TR-165 " ::= { adsl2Mode 1 } hwadslabrmodecfg OBJECT-TYPE SYNTAX INTEGER { normalMode(1), ptMode(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to change abr-calculation mode. Options: 1. normalMode(1) - Change mode to normal abr-calculation 2. ptMode(2) - Change mode to pt abr-calculation " ::= { adsl2Mode 2 } -- adsl2LineConfProfTable adsl2LConfProfTrellisMode OBJECT-TYPE SYNTAX Adsl2TrellisMode MAX-ACCESS read-create STATUS current DESCRIPTION "Enable and disable the trellis mode. This object is defaulted enabled(2). Options: 1. disable(1) - Disable the trellis 2. enable(2) - Enable the trellis " ::= { adsl2LineConfProfEntry 65535 } adsl2LConfProfBitSwapDs OBJECT-TYPE SYNTAX Adsl2BitSwap MAX-ACCESS read-create STATUS current DESCRIPTION "Enable and disable the bit swap downstream of a line. This object is defaulted enable(2). Options: 1. disable(1) - Disable the bit swap downstream of a line 2. enable(2) - Enable the bit swap downstream of a line " ::= { adsl2LineConfProfEntry 65536 } adsl2LConfProfBitSwapUs OBJECT-TYPE SYNTAX Adsl2BitSwap MAX-ACCESS read-create STATUS current DESCRIPTION "Enable and disable the bit swap upstream of a line. This object is defaulted enable(2). Options: 1. disable(1) - Disable the bit swap upstream of a line 2. enable(2) - Enable the bit swap upstream of a line " -- DEFVAL { enable } ::= { adsl2LineConfProfEntry 65537 } adsl2LConfProfDpboEPsd OBJECT-TYPE SYNTAX Adsl2DpboEpsd UNITS "0.5dBm/Hz" MAX-ACCESS read-create STATUS current DESCRIPTION "This parameter defines the PSD mask that is assumed to be permitted at the exchange. This parameter shall use the same format as PSDMASKds.The maximum number of breakpoints for DPBOEPSD is 16. This is a string of 16 pairs of values in the following structure: Octets 0+1 - Index of 1st sub-carrier used in the context of a first breakpoint Octet 2 - The PSD reduction for the sub-carrier indicated in octets 0 and 1 Octets 3-5 - Same, for a 2nd breakpoint Octets 6-8 - Same, for a 3rd breakpoint This architecture continues until octets 45-47, which are associated with a 16th breakpoint. Each subcarrier index is an unsigned number in the range 1 and NSCds. Each PSD reduction value is in the range 0 (0dBm/Hz) to 255 (-127.5dBm/Hz) with steps of 0.5dBm/Hz. Valid values are in the range 0 to 190 (0 to -95dBm/Hz). When the number of breakpoints is less than 16, all remaining octets are set to the value 0xff. Unit: 0.5dBm/Hz " REFERENCE "ITU-T G.997.1(200604), paragraph 7.3.1.2.13" ::= { adsl2LineConfProfEntry 65538 } adsl2LConfProfDpboEsEL OBJECT-TYPE SYNTAX Unsigned32 (0..511) UNITS "0.5dB" MAX-ACCESS read-create STATUS current DESCRIPTION "This configuration parameter defines the assumed electrical length of cables (E-side cables) connecting exchange based DSL services to a remote flexibility point (cabinet), that hosts the xTU-C that is subject to spectrally shaped downstream power back-off depending on this length. For this parameter the electrical length is defined as the loss (in dB) of an equivalent length of hypothetical cable at a reference frequency defined by the network operator or in spectrum management regulations. DPBOESEL shall be coded as an unsigned integer representing an electrical length from 0 dB (coded as 0) to 255.5 dB (coded as 511) in steps of 0.5 dB. All values in the range are valid.If DPBOESEL is set to zero, the DPBO in this section shall be disabled. This object is defaulted 0. Unit: 0.5dB " REFERENCE "ITU-T G.997.1(200604), paragraph 7.3.1.2.13" ::= { adsl2LineConfProfEntry 65539 } adsl2LConfProfDpboEsCableModelA OBJECT-TYPE SYNTAX Unsigned32 (0..640) MAX-ACCESS read-create STATUS current DESCRIPTION "This configuration parameter defines a cable model in terms of three scalars DPBOESCMA, DPBOESCMB and DPBOESCMC that shall be used to describe the frequency dependent loss of E-side cables.Parameters DPBOESCMA, DPBOESCMB, DPBOESCMC shall be coded as unsigned integers representing a scalar value from -1 (coded as 0) to 1.5 (coded as 640) in step of 1/256. All values in the range are valid. This object is defaulted 256. " REFERENCE "ITU-T G.997.1(200604), paragraph 7.3.1.2.13" ::= { adsl2LineConfProfEntry 65540 } adsl2LConfProfDpboEsCableModelB OBJECT-TYPE SYNTAX Unsigned32 (0..640) MAX-ACCESS read-create STATUS current DESCRIPTION "This configuration parameter defines a cable model in terms of three scalars DPBOESCMA, DPBOESCMB and DPBOESCMC that shall be used to describe the frequency dependent loss of E-side cables.Parameters DPBOESCMA, DPBOESCMB, DPBOESCMC shall be coded as unsigned integers representing a scalar value from -1 (coded as 0) to 1.5 (coded as 640) in step of 1/256. All values in the range are valid.This object is defaulted 512. " REFERENCE "ITU-T G.997.1(200604), paragraph 7.3.1.2.13" ::= { adsl2LineConfProfEntry 65541 } adsl2LConfProfDpboEsCableModelC OBJECT-TYPE SYNTAX Unsigned32 (0..640) MAX-ACCESS read-create STATUS current DESCRIPTION "This configuration parameter defines a cable model in terms of three scalars DPBOESCMA, DPBOESCMB and DPBOESCMC that shall be used to describe the frequency dependent loss of E-side cables.Parameters DPBOESCMA, DPBOESCMB, DPBOESCMC shall be coded as unsigned integers representing a scalar value from -1 (coded as 0) to 1.5 (coded as 640) in step of 1/256. All values in the range are valid.This object is defaulted 256. " REFERENCE "ITU-T G.997.1(200604), paragraph 7.3.1.2.13" ::= { adsl2LineConfProfEntry 65542 } adsl2LConfProfDpboMus OBJECT-TYPE SYNTAX Unsigned32 (0..255) UNITS "0.5dBm/Hz" MAX-ACCESS read-create STATUS current DESCRIPTION "DPBOMUS defines the assumed Minimum Usable receive Signal PSD (in dBm/Hz) for exchange based services, used to modify parameter DPBOFMAX defined below. It shall be coded as an unsigned integer representing a PSD level from 0 dBm/Hz (coded as 0) to -127.5 dBm/Hz (coded as 255) in steps of 0.5 dBm/Hz. All values in the range are valid.This object is defaulted 180. Unit: 0.5dBm/Hz " REFERENCE "ITU-T G.997.1(200604), paragraph 7.3.1.2.13" ::= { adsl2LineConfProfEntry 65543 } adsl2LConfProfDpboFMin OBJECT-TYPE SYNTAX Unsigned32 (0..2048) UNITS "4.3125 KHz" MAX-ACCESS read-create STATUS current DESCRIPTION "DPBOFMIN defines the minimum frequency from which the DPBO shall be applied. It shall be coded as a 16 bits unsigned integer representing a frequency in multiple of 4.3125 KHz. The range of valid values is from 0 kHz (coded as 0) to 8832 kHz (coded as 2048). This object is defaulted 0. Unit: 4.3125 KHz " REFERENCE "ITU-T G.997.1(200604), paragraph 7.3.1.2.13" ::= { adsl2LineConfProfEntry 65544 } adsl2LConfProfDpboFMax OBJECT-TYPE SYNTAX Unsigned32 (32..6956) UNITS "4.3125 KHz" MAX-ACCESS read-create STATUS current DESCRIPTION "DPBOFMAX defines the maximum frequency at which DPBO may be applied. It shall be coded as a 16 bits unsigned integer representing a frequency in multiple of 4.3125 KHz. The range of valid values is from 138 kHz (coded as 32) to 29997.75 kHz (coded as 6956). This object is defaulted 511. Unit: 4.3125 KHz " REFERENCE "ITU-T G.997.1(200604), paragraph 7.3.1.2.13" ::= { adsl2LineConfProfEntry 65545 } -- adsl2SCStatusTable adsl2SCStatusTxPSD OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..1024)) UNITS "0.1 dBm/Hz" MAX-ACCESS read-only STATUS current DESCRIPTION "The PSD MASK per sub-carrier.An array of 512 16-bits values, designed for supporting up to 512 (downstream) sub-carriers. It ranges from -1400 to -300 units of 0.1 dBm/Hz (physical values are -140 to -30 dBm/Hz) Unit: 0.1 dBm/Hz " ::= { adsl2SCStatusEntry 65535 } adsl2SCStatusSnrMargins OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..1024)) UNITS "0.1 dB" MAX-ACCESS read-only STATUS current DESCRIPTION "SNR Margin is the maximum increase in dB of the noise power received at the ATU (ATU-R on downstream direction and ATU-C on upstream direction), such that the BER requirements are met for all bearer channels received at the ATU. It ranges from -640 to 630 units of 0.1 dB (physical values are -64 to 63 dB). Unit: 0.1 dB " ::= { adsl2SCStatusEntry 65536 } -- adsl2LineTable adsl2LineStatusCodingGainDs OBJECT-TYPE SYNTAX Unsigned32 UNITS "0.5 dB" MAX-ACCESS read-only STATUS current DESCRIPTION "The actual value of Coding gain upstream parameter,it ranges from 0 to 16. Unit: 0.5 dB " ::= { adsl2LineEntry 65535 } adsl2LineStatusCodingGainUs OBJECT-TYPE SYNTAX Unsigned32 UNITS "0.5 dB" MAX-ACCESS read-only STATUS current DESCRIPTION "The actual value of Coding gain downstream parameter,it ranges from 0 to 16. Unit: 0.5 dB " ::= { adsl2LineEntry 65536 } adsl2LineStatusPcbDs OBJECT-TYPE SYNTAX Unsigned32 UNITS "tenth dB" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates Power Cut-back on downstream direction. It ranges from 0 to 400 units of 0.1 dB (physical values are 0 to 40 dB). Unit: tenth dB " ::= { adsl2LineEntry 65537 } adsl2LineStatusPcbUs OBJECT-TYPE SYNTAX Unsigned32 UNITS "tenth dB" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates Power Cut-back on upstream direction. It ranges from 0 to 400 units of 0.1 dB (physical values are 0 to 40 dB) Unit: tenth dB " ::= { adsl2LineEntry 65538 } hwadsl2Dynamicprofile OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this object identifies the row in the ADSL Dynamic Profile Table,which applies to this ADSL line, and channels if applicable. NULL - indicates that there is no Dynamic profile bound to this port. " ::= { adsl2LineEntry 65539 } hwadsl2 OBJECT IDENTIFIER ::= { hwadsl2MIB 1 } hwadsl2Line OBJECT IDENTIFIER ::= { hwadsl2 1 } hwadsl2Status OBJECT IDENTIFIER ::= { hwadsl2 2 } hwadsl2Inventory OBJECT IDENTIFIER ::= { hwadsl2 3 } hwadsl2PM OBJECT IDENTIFIER ::= { hwadsl2 4 } hwadsl2Profile OBJECT IDENTIFIER ::= { hwadsl2 5 } hwadsl2Scalar OBJECT IDENTIFIER ::= { hwadsl2 6 } hwadsl2Notifications OBJECT IDENTIFIER ::= { hwadsl2 0 } hwadsl2Conformance OBJECT IDENTIFIER ::= { hwadsl2 8 } hwadsl2Mode OBJECT IDENTIFIER ::= { hwadsl2 9 } hwAdsl2TrapsVbOids OBJECT IDENTIFIER ::= { hwadsl2 10 } hwadsl2Traps OBJECT IDENTIFIER ::= { hwadsl2 11 } hwadsl2PMLine OBJECT IDENTIFIER ::= { hwadsl2PM 1 } hwadsl2PMChannel OBJECT IDENTIFIER ::= { hwadsl2PM 2 } hwadsl2ProfileLine OBJECT IDENTIFIER ::= { hwadsl2Profile 1 } hwadsl2ProfileChannel OBJECT IDENTIFIER ::= { hwadsl2Profile 2 } hwadsl2ProfileAlarmConf OBJECT IDENTIFIER ::= { hwadsl2Profile 3 } hwadsl2ScalarSC OBJECT IDENTIFIER ::= { hwadsl2Scalar 1 } hwAdsl2CommonTraps OBJECT IDENTIFIER ::= { hwadsl2Traps 1 } hwAdsl2CommonTrapsPrefix OBJECT IDENTIFIER ::= { hwAdsl2CommonTraps 0 } hwadsl2AlarmTraps OBJECT IDENTIFIER ::= { hwadsl2Traps 2 } hwadsl2AlarmTrapsPrefix OBJECT IDENTIFIER ::= { hwadsl2AlarmTraps 0 } -- hwadsl2ChannelStatusTable hwadsl2ChannelStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF Hwadsl2ChannelStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table hwadsl2ChannelStatusTable contains status parameters of the ADSL2 channel and live data from equipment. The indexes of this table are ifIndex and adsl2ChStatusUnit. " ::= { hwadsl2Status 1 } hwadsl2ChannelStatusEntry OBJECT-TYPE SYNTAX Hwadsl2ChannelStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table hwadsl2ChannelStatusTable contains status parameters of the ADSL2 channel and live data from equipment. The indexes of this entry are ifIndex and adsl2ChStatusUnit. " INDEX { ifIndex, adsl2ChStatusUnit } ::= { hwadsl2ChannelStatusTable 1 } Hwadsl2ChannelStatusEntry ::= SEQUENCE { hwadsl2ChStatusPhyRrrcBits Counter32, hwadsl2ChStatusPhyRtxQueue Counter32, hwadsl2ChStatusINP Unsigned32, hwadsl2ChStatusRSRedundancy Unsigned32, hwadsl2ChStatusRSSymbols Unsigned32, hwadsl2ChStatusInterDepth Unsigned32, hwadsl2ChStatusSymbolLength Unsigned32, hwadsl2ChStatusRSSize Unsigned32, hwadsl2ChStatusActNetDataRate Unsigned32, hwadsl2ChStatusActINPAgainstREIN Unsigned32 } hwadsl2ChStatusPhyRrrcBits OBJECT-TYPE SYNTAX Counter32 UNITS "bit" MAX-ACCESS read-only STATUS current DESCRIPTION "The bits in the channel that used to retransmission. Unit: bit " ::= { hwadsl2ChannelStatusEntry 1 } hwadsl2ChStatusPhyRtxQueue OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of the units for retransmission." ::= { hwadsl2ChannelStatusEntry 2 } hwadsl2ChStatusINP OBJECT-TYPE SYNTAX Unsigned32(0..254) UNITS "0.1 DMT symbol" MAX-ACCESS read-only STATUS current DESCRIPTION "If retransmission is not used in a given transmit direction, this parameter reports the actual impulse noise protection (INP) on the bearer channel in the L0 state. In the L1 or L2 state, the parameter contains the INP in the previous L0 state. If retransmission is used in a given transmit direction, this parameter reports the actual impulse noise protection (INP) against SHINE on the bearer channel in the L0 state. In the L2 state, the parameter contains the INP in the previous L0 state. Unit: 0.1 DMT symbol " REFERENCE "ITU-T G.997.1, paragraph 7.5.2.4" ::= { hwadsl2ChannelStatusEntry 3 } hwadsl2ChStatusRSRedundancy OBJECT-TYPE SYNTAX Unsigned32(0..16) UNITS "byte" MAX-ACCESS read-only STATUS current DESCRIPTION "The actual number of Reed-Solomon redundancy bytes per codeword used in the latency path in which the bearer channel is transported. The value is coded in bytes. The value 0 indicates no Reed-Solomon coding. Unit: byte " REFERENCE "ITU-T G.997.1, paragraph 7.5.2.6.2" ::= { hwadsl2ChannelStatusEntry 4 } hwadsl2ChStatusRSSymbols OBJECT-TYPE SYNTAX Unsigned32 UNITS "0.01 DMT symbol" MAX-ACCESS read-only STATUS current DESCRIPTION "The DMT Symbol number per codeword used in the latency path in which the bearer channel is transported. Unit: 0.01 DMT symbol " REFERENCE "ITU-T G.997.1, paragraph 7.5.2.3" ::= { hwadsl2ChannelStatusEntry 5 } hwadsl2ChStatusInterDepth OBJECT-TYPE SYNTAX Unsigned32(1..4096) MAX-ACCESS read-only STATUS current DESCRIPTION "The actual Reed-Solomon codeword size used in the latency path in which the bearer channel is transported. The value ranges from 1 to 4096 by step of 1. The value 1 indicates no interleaving. " REFERENCE "ITU-T G.997.1, paragraph 7.5.2.6.4" ::= { hwadsl2ChannelStatusEntry 6 } hwadsl2ChStatusSymbolLength OBJECT-TYPE SYNTAX Unsigned32(0..65535) UNITS "bit" MAX-ACCESS read-only STATUS current DESCRIPTION "The actual number of bits per symbol assigned to the latency path in which the bearer channel is transported. This value does not include trellis overhead. Unit: bit " REFERENCE "ITU-T G.997.1, paragraph 7.5.2.6.3" ::= { hwadsl2ChannelStatusEntry 7 } hwadsl2ChStatusRSSize OBJECT-TYPE SYNTAX Unsigned32(0..255) UNITS "byte" MAX-ACCESS read-only STATUS current DESCRIPTION "The actual Reed-Solomon codeword size used in the latency path in which the bearer channel is transported. Unit: byte " REFERENCE "ITU-T G.997.1, paragraph 7.5.2.6.1" ::= { hwadsl2ChannelStatusEntry 8 } hwadsl2ChStatusActNetDataRate OBJECT-TYPE SYNTAX Unsigned32 UNITS "bits/second" MAX-ACCESS read-only STATUS current DESCRIPTION "In L0 state, this parameter reports the Net Data Rate at which the bearer channel is operating. In L2 state, this parameter contains the Net Data Rate in the previous L0 state. This parameter is optional if G.998.4 retransmission function is not supported. The data rate is coded in steps of 1000 bit/s. " REFERENCE "ITU-T G.997.1, paragraph 7.5.2.8" ::= { hwadsl2ChannelStatusEntry 9 } hwadsl2ChStatusActINPAgainstREIN OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "If retransmission is used in a given transmit direction, this parameter reports the actual impulse noise protection (INP) against REIN (under specific conditions detailed in G.998.4) on the bearer channel in the L0 state. In the L2 state, the parameter contains the INP in the previous L0 state. The value is coded in fractions of DMT symbols with a granularity of 0.1 symbols. " REFERENCE "ITU-T G.997.1, paragraph 7.5.2.9" ::= { hwadsl2ChannelStatusEntry 10 } -- hwadsl2LineConfProfTable Adsl2LConfProfReferenceClockType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The various clock references for the ADSL line, represented as an enumeration. Options: 1. freeRun(1) - Indicates the local clock 2. system(2) - Indicates the system clock " SYNTAX INTEGER { freeRun(1), system(2) } Adsl2ProfSwitchType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The profile switch value is enable or disable. Options: 1. enable(1) - Enable the switch 2. disable(2) - Disable the switch " SYNTAX INTEGER { enable(1), disable(2) } hwadsl2LineConfProfTable OBJECT-TYPE SYNTAX SEQUENCE OF Hwadsl2LineConfProfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table hwadsl2LineConfProfTable contains huawei private ADSL2 line profile configuration.Entries in this table MUST be maintained in a persistent manner. The index of this table is adsl2LConfProfProfileName. " ::= { hwadsl2ProfileLine 2 } hwadsl2LineConfProfEntry OBJECT-TYPE SYNTAX Hwadsl2LineConfProfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table hwadsl2LineConfProfTable contains huawei private ADSL2 line profile configuration.Entries in this table MUST be maintained in a persistent manner. The index of this entry is adsl2LConfProfProfileName. " INDEX { IMPLIED adsl2LConfProfProfileName } ::= { hwadsl2LineConfProfTable 1 } Hwadsl2LineConfProfEntry ::= SEQUENCE { hwadsl2LConfProfInmIatoDs Unsigned32, hwadsl2LConfProfInmIatsDs Unsigned32, hwadsl2LConfProfInmCcDs Unsigned32, hwadsl2LConfProfInmInpeqModeDs Unsigned32, hwadsl2LConfProfRfiBands Adsl2RfiBand, hwadsl2LConfProfReferenceClock Adsl2LConfProfReferenceClockType, hwadsl2LConfProfL3Time Unsigned32, hwadsl2LConfProfDpboEselMin Unsigned32, hwadsl2LConfProfTrellisMode Adsl2TrellisMode, hwadsl2LConfProfBitSwapDs Adsl2BitSwap, hwadsl2LConfProfBitSwapUs Adsl2BitSwap, hwadsl2LConfProfDpboEPsd Adsl2DpboEpsd, hwadsl2LConfProfDpboEsEL Unsigned32, hwadsl2LConfProfDpboEsCableModelA Unsigned32, hwadsl2LConfProfDpboEsCableModelB Unsigned32, hwadsl2LConfProfDpboEsCableModelC Unsigned32, hwadsl2LConfProfDpboMus Unsigned32, hwadsl2LConfProfDpboFMin Unsigned32, hwadsl2LConfProfDpboFMax Unsigned32 } hwadsl2LConfProfInmIatoDs OBJECT-TYPE SYNTAX Unsigned32(3..511) MAX-ACCESS read-create STATUS current DESCRIPTION "The parameter of downstream impulse noise monitoring inter arrival time offset. This is the Inter Arrival Time Offset that the xTU receiver shall use to determine in which bin of the Inter Arrival Time histogram the IAT is reported. The valid values for INMIATO ranges from 3 to 511 DMT symbols in steps of 1 DMT symbol. " REFERENCE "ITU-T G.997.1, paragraph 7.3.1.9.1" DEFVAL { 3 } ::= { hwadsl2LineConfProfEntry 1 } hwadsl2LConfProfInmIatsDs OBJECT-TYPE SYNTAX Unsigned32(0..7) MAX-ACCESS read-create STATUS current DESCRIPTION "The parameter of downstream impulse noise monitoring inter arrival time step. This is the Inter Arrival Time Step that the xTU receiver shall use to determine in which bin of the Inter Arrival Time histogram the IAT is reported. The valid values for INMIATS ranges from 0 to 7 in steps of 1. " REFERENCE "ITU-T G.997.1, paragraph 7.3.1.9.2" DEFVAL { 0 } ::= { hwadsl2LineConfProfEntry 2 } hwadsl2LConfProfInmCcDs OBJECT-TYPE SYNTAX Unsigned32(0..64) MAX-ACCESS read-create STATUS current DESCRIPTION "The parameter of Downstream impulse noise monitoring cluster continuation value. This is the Cluster Continuation value that the xTU receiver shall use in the cluster indication process described in the relevant ITU-T Recommendation. The valid values for INMCC range from 0 to 64 DMT symbols in steps of 1 DMT symbol. " REFERENCE "ITU-T G.997.1, paragraph 7.3.1.9.3" DEFVAL { 0 } ::= { hwadsl2LineConfProfEntry 3 } hwadsl2LConfProfInmInpeqModeDs OBJECT-TYPE SYNTAX Unsigned32(0..4) MAX-ACCESS read-create STATUS current DESCRIPTION "The parameter of Downstream impulse noise monitoring equivalent impulse noise protect mode. This is the INM Equivalent INP Mode that the xTU receiver shall use in the computation of the Equivalent INP, as defined in the relevant ITU-T Recommendation. The valid values for INM_INPEQ_MODE are 0, 1, 2, 3, and 4. " REFERENCE "ITU-T G.997.1, paragraph 7.3.1.9.4" DEFVAL { 0 } ::= { hwadsl2LineConfProfEntry 4 } hwadsl2LConfProfRfiBands OBJECT-TYPE SYNTAX Adsl2RfiBand MAX-ACCESS read-create STATUS current DESCRIPTION "The RFI notch parameter. It is a string consist of begin tone index, end tone index and psd value. This is a string of 4 groups of values in the following structure: Octets 0+1 - Index of start sub-carrier used in the context of a first group Octets 2+3 - Index of end sub-carrier used in the context of a first group Octet 4+5 - The psd value configurated in the first group Octets 6-11 - Same, for a 2nd group This architecture continues until octets 22-23, which are associated with a 4th group.It can contain as most as 4 groups. " ::= { hwadsl2LineConfProfEntry 5 } hwadsl2LConfProfReferenceClock OBJECT-TYPE SYNTAX Adsl2LConfProfReferenceClockType MAX-ACCESS read-create STATUS current DESCRIPTION "This object configures the clock reference for the ATU-C in an ADSL Line. " DEFVAL { freeRun } ::= { hwadsl2LineConfProfEntry 6 } hwadsl2LConfProfL3Time OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "This minimum time (in seconds) between an Entry into the L3 state and the L0 or L2 state. Unit: seconds " DEFVAL { 255 } ::= { hwadsl2LineConfProfEntry 7 } hwadsl2LConfProfDpboEselMin OBJECT-TYPE SYNTAX Unsigned32 (0..511) UNITS "0.5dB" MAX-ACCESS read-create STATUS current DESCRIPTION "DPBOESELMIN in dB is the minimum of all main cable losses for the KVz supplied when using the SOL model (expansion of a KVz and ADSL2 provision of additional KVz areas from this KVz using cross-cables to additional KVz), including the KVz at the MSAN site. This value must be adjustable as the minimum requirement via the SNMP interface in the configuration profile for each ADSL2 port, and is set individually for each MSAN site and usage. As an option, adjustment can be done for each MSAN or line card, thus taking effect for entire port groups. It is used only for determining the MUF. Unit: 0.5dB " DEFVAL { 0 } ::= { hwadsl2LineConfProfEntry 8 } hwadsl2LConfProfTrellisMode OBJECT-TYPE SYNTAX Adsl2TrellisMode MAX-ACCESS read-create STATUS current DESCRIPTION "Enables and disables the trellis mode. This object is defaulted enabled(2). " DEFVAL { enable } ::= { hwadsl2LineConfProfEntry 9 } hwadsl2LConfProfBitSwapDs OBJECT-TYPE SYNTAX Adsl2BitSwap MAX-ACCESS read-create STATUS current DESCRIPTION "Enables and disables the bit swap downstream of a line." DEFVAL { enable } ::= { hwadsl2LineConfProfEntry 10 } hwadsl2LConfProfBitSwapUs OBJECT-TYPE SYNTAX Adsl2BitSwap MAX-ACCESS read-create STATUS current DESCRIPTION "Enables and disables the bit swap upstream of a line." DEFVAL { enable } ::= { hwadsl2LineConfProfEntry 11 } hwadsl2LConfProfDpboEPsd OBJECT-TYPE SYNTAX Adsl2DpboEpsd MAX-ACCESS read-create STATUS current DESCRIPTION "This parameter defines the PSD mask that is assumed to be permitted at the exchange. This parameter shall use the same format as PSDMASKds.The maximum number of breakpoints for DPBOEPSD is 16. This is a string of 16 pairs of values in the following structure: Octets 0+1 - Index of 1st sub-carrier used in the context of a first breakpoint. Octet 2 - The PSD reduction for the sub-carrier indicated in octets 0 and 1 Octets 3-5 - Same, for a 2nd breakpoint Octets 6-8 - Same, for a 3rd breakpoint This architecture continues until octets 45-47, which are associated with a 16th breakpoint. Each subcarrier index is an unsigned number in the range 1 and NSCds. Each PSD reduction value is in the range 0 (0dBm/Hz) to 255 (-127.5dBm/Hz) with steps of 0.5dBm/Hz. Valid values are in the range 0 to 190 (0 to -95dBm/Hz). When the number of breakpoints is less than 16, all remaining octets are set to the value 0xff. " REFERENCE "ITU-T G.997.1(200604), paragraph 7.3.1.2.13" ::= { hwadsl2LineConfProfEntry 12 } hwadsl2LConfProfDpboEsEL OBJECT-TYPE SYNTAX Unsigned32 (0..511) UNITS "0.5dB" MAX-ACCESS read-create STATUS current DESCRIPTION "This configuration parameter defines the assumed electrical length of cables (E-side cables) connecting exchange based DSL services to a remote flexibility point (cabinet), that hosts the xTU-C that is subject to spectrally shaped downstream power back-off depending on this length. For this parameter the electrical length is defined as the loss (in dB) of an equivalent length of hypothetical cable at a reference frequency defined by the network operator or in spectrum management regulations. DPBOESEL shall be coded as an unsigned integer representing an electrical length from 0 dB (coded as 0) to 255.5 dB (coded as 511) in steps of 0.5 dB. All values in the range are valid.If DPBOESEL is set to zero, the DPBO in this section shall be disabled. Unit: 0.5dB " REFERENCE "ITU-T G.997.1(200604), paragraph 7.3.1.2.13" DEFVAL { 0 } ::= { hwadsl2LineConfProfEntry 13 } hwadsl2LConfProfDpboEsCableModelA OBJECT-TYPE SYNTAX Unsigned32 (0..640) MAX-ACCESS read-create STATUS current DESCRIPTION "This configuration parameter defines a cable model in terms of three scalars DPBOESCMA, DPBOESCMB and DPBOESCMC that shall be used to describe the frequency dependent loss of E-side cables.Parameters DPBOESCMA, DPBOESCMB, DPBOESCMC shall be coded as unsigned integers representing a scalar value from -1 (coded as 0) to 1.5 (coded as 640) in step of 1/256. All values in the range are valid. " REFERENCE "ITU-T G.997.1(200604), paragraph 7.3.1.2.13" DEFVAL { 256 } ::= { hwadsl2LineConfProfEntry 14 } hwadsl2LConfProfDpboEsCableModelB OBJECT-TYPE SYNTAX Unsigned32 (0..640) MAX-ACCESS read-create STATUS current DESCRIPTION "This configuration parameter defines a cable model in terms of three scalars DPBOESCMA, DPBOESCMB and DPBOESCMC that shall be used to describe the frequency dependent loss of E-side cables.Parameters DPBOESCMA, DPBOESCMB, DPBOESCMC shall be coded as unsigned integers representing a scalar value from -1 (coded as 0) to 1.5 (coded as 640) in step of 1/256. All values in the range are valid. " REFERENCE "ITU-T G.997.1(200604), paragraph 7.3.1.2.13" DEFVAL { 512 } ::= { hwadsl2LineConfProfEntry 15 } hwadsl2LConfProfDpboEsCableModelC OBJECT-TYPE SYNTAX Unsigned32 (0..640) MAX-ACCESS read-create STATUS current DESCRIPTION "This configuration parameter defines a cable model in terms of three scalars DPBOESCMA, DPBOESCMB and DPBOESCMC that shall be used to describe the frequency dependent loss of E-side cables.Parameters DPBOESCMA, DPBOESCMB, DPBOESCMC shall be coded as unsigned integers representing a scalar value from -1 (coded as 0) to 1.5 (coded as 640) in step of 1/256. All values in the range are valid. " REFERENCE "ITU-T G.997.1(200604), paragraph 7.3.1.2.13" DEFVAL { 256 } ::= { hwadsl2LineConfProfEntry 16 } hwadsl2LConfProfDpboMus OBJECT-TYPE SYNTAX Unsigned32 (0..255) UNITS "0.5dBm/Hz" MAX-ACCESS read-create STATUS current DESCRIPTION "DPBOMUS defines the assumed Minimum Usable receive Signal PSD (in dBm/Hz) for exchange based services, used to modify parameter DPBOFMAX defined below. It shall be coded as an unsigned integer representing a PSD level from 0 dBm/Hz (coded as 0) to -127.5 dBm/Hz (coded as 255) in steps of 0.5 dBm/Hz. All values in the range are valid. Unit: 0.5dBm/Hz " REFERENCE "ITU-T G.997.1(200604), paragraph 7.3.1.2.13" DEFVAL { 180 } ::= { hwadsl2LineConfProfEntry 17 } hwadsl2LConfProfDpboFMin OBJECT-TYPE SYNTAX Unsigned32 (0..2048) UNITS "4.3125 KHz" MAX-ACCESS read-create STATUS current DESCRIPTION "DPBOFMIN defines the minimum frequency from which the DPBO shall be applied. It shall be coded as a 16 bits unsigned integer representing a frequency in multiple of 4.3125 KHz. The range of valid values is from 0 kHz (coded as 0) to 8832 kHz (coded as 2048). Unit: 4.3125 KHz " REFERENCE "ITU-T G.997.1(200604), paragraph 7.3.1.2.13" DEFVAL { 0 } ::= { hwadsl2LineConfProfEntry 18 } hwadsl2LConfProfDpboFMax OBJECT-TYPE SYNTAX Unsigned32 (32..6956) UNITS "4.3125 KHz" MAX-ACCESS read-create STATUS current DESCRIPTION "DPBOFMAX defines the maximum frequency at which DPBO may be applied. It shall be coded as a 16 bits unsigned integer representing a frequency in multiple of 4.3125 KHz. The range of valid values is from 138 kHz (coded as 32) to 29997.75 kHz (coded as 6956). Unit: 4.3125 KHz " REFERENCE "ITU-T G.997.1(200604), paragraph 7.3.1.2.13" DEFVAL { 511 } ::= { hwadsl2LineConfProfEntry 19 } -- hwadsl2ChConfProfileTable hwadsl2ChConfProfileTable OBJECT-TYPE SYNTAX SEQUENCE OF Hwadsl2ChConfProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table hwadsl2ChConfProfileTable contains huawei private ADSL2 channel profile configuration. Entries in this table MUST be maintained in a persistent manner. The index of this table is adsl2ChConfProfProfileName. " ::= { hwadsl2ProfileChannel 1 } hwadsl2ChConfProfileEntry OBJECT-TYPE SYNTAX Hwadsl2ChConfProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table hwadsl2ChConfProfileTable contains huawei private ADSL2 channel profile configuration. Entries in this table MUST be maintained in a persistent manner. The index of this entry is adsl2ChConfProfProfileName. " INDEX { IMPLIED adsl2ChConfProfProfileName } ::= { hwadsl2ChConfProfileTable 1 } Hwadsl2ChConfProfileEntry ::= SEQUENCE { hwadsl2ChConfProfDataPathMode Adsl2DataPathMode, hwadsl2ChConfProfErasureDecoding Adsl2ProfSwitchType, hwadsl2ChConfProfPhyRcontrolDs Adsl2PhyRControl, hwadsl2ChConfProfPhyRcontrolUs Adsl2PhyRControl, hwadsl2ChConfProfInpMaxDs Adsl2SymbolProtection, hwadsl2ChConfProfInpMaxUs Adsl2SymbolProtection, hwadsl2ChConfProfMinRtxRatioDs Unsigned32, hwadsl2ChConfProfMinRtxRatioUs Unsigned32, hwadsl2ChConfProfMinRSoverheadDs Unsigned32, hwadsl2ChConfProfMinRSoverheadUs Unsigned32 } hwadsl2ChConfProfDataPathMode OBJECT-TYPE SYNTAX Adsl2DataPathMode MAX-ACCESS read-create STATUS current DESCRIPTION "The channel data path mode. Options: 1. atm(1) - ATM data path 2. ptm(2) - PTM data path 3. both(3) - ATM and PTM data path Huawei defined. " DEFVAL { both } ::= { hwadsl2ChConfProfileEntry 1 } hwadsl2ChConfProfErasureDecoding OBJECT-TYPE SYNTAX Adsl2ProfSwitchType MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable the erasure decoding of a channel. Options: 1. enable(1) - Open the erasure decoding of a channel 2. disable(2) - Close the erasure decoding of a channel " DEFVAL { disable } ::= { hwadsl2ChConfProfileEntry 2 } hwadsl2ChConfProfPhyRcontrolDs OBJECT-TYPE SYNTAX Adsl2PhyRControl MAX-ACCESS read-create STATUS current DESCRIPTION "To enable or disable the retransmission function of downstream PHY-R. Options: 1. enable(1) - Enable the retransmission function of downstream PHY-R 2. disable(2) - Disable the retransmission function of downstream PHY-R " DEFVAL { disable } ::= { hwadsl2ChConfProfileEntry 3 } hwadsl2ChConfProfPhyRcontrolUs OBJECT-TYPE SYNTAX Adsl2PhyRControl MAX-ACCESS read-create STATUS current DESCRIPTION "To enable or disable the retransmission function of upstream PHY-R. Options: 1. enable(1) - Enable the retransmission function of upstream PHY-R 2. disable(2) - Disable the retransmission function of upstream PHY-R " DEFVAL { disable } ::= { hwadsl2ChConfProfileEntry 4 } hwadsl2ChConfProfInpMaxDs OBJECT-TYPE SYNTAX Adsl2SymbolProtection MAX-ACCESS read-create STATUS current DESCRIPTION "Maximum Impulse Noise Protection on downstream direction." ::= { hwadsl2ChConfProfileEntry 5 } hwadsl2ChConfProfInpMaxUs OBJECT-TYPE SYNTAX Adsl2SymbolProtection MAX-ACCESS read-create STATUS current DESCRIPTION "Maximum Impulse Noise Protection on upstream direction." ::= { hwadsl2ChConfProfileEntry 6 } hwadsl2ChConfProfMinRtxRatioDs OBJECT-TYPE SYNTAX Unsigned32(0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to config the minimum retransmission band width parameter downstream." ::= { hwadsl2ChConfProfileEntry 7 } hwadsl2ChConfProfMinRtxRatioUs OBJECT-TYPE SYNTAX Unsigned32(0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to config the minimum retransmission band width parameter upstream." ::= { hwadsl2ChConfProfileEntry 8 } hwadsl2ChConfProfMinRSoverheadDs OBJECT-TYPE SYNTAX Unsigned32(0..128) MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to config the minimum RSoverhead parameter downstream." ::= { hwadsl2ChConfProfileEntry 9 } hwadsl2ChConfProfMinRSoverheadUs OBJECT-TYPE SYNTAX Unsigned32(0..128) MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to config the minimum RSoverhead parameter upstream." ::= { hwadsl2ChConfProfileEntry 10 } -- PM current counters -- PM line current counters hwadsl2PMLineCurrTable OBJECT-TYPE SYNTAX SEQUENCE OF Hwadsl2PMLineCurrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table hwadsl2PMLineCurrTable contains current Performance Monitoring results of ADSL2 line. The PM counters in the table are not reset even when the xtU is reinitialized. They are re-initialized only when the agent itself is reset or reinitialized. The indexes of this table are ifIndex and adsl2PMLCurrUnit. " ::= { hwadsl2PMLine 1 } hwadsl2PMLineCurrEntry OBJECT-TYPE SYNTAX Hwadsl2PMLineCurrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table hwadsl2PMLineCurrTable contains current Performance Monitoring results of ADSL2 line. The PM counters in the table are not reset even when the xtU is reinitialized. They are re-initialized only when the agent itself is reset or reinitialized. The indexes of this entry are ifIndex and adsl2PMLCurrUnit. " INDEX { ifIndex, adsl2PMLCurrUnit } ::= { hwadsl2PMLineCurrTable 1 } Hwadsl2PMLineCurrEntry ::= SEQUENCE { hwadsl2PMLCurr15MInmainpeq OCTET STRING, hwadsl2PMLCurr15MInmame Counter32, hwadsl2PMLCurr15MInmaiat OCTET STRING, hwadsl2PMLCurr1DayInmainpeq OCTET STRING, hwadsl2PMLCurr1DayInmame Counter32, hwadsl2PMLCurr1DayInmaiat OCTET STRING, hwadsl2PMLEverBeforeInmainpeq OCTET STRING, hwadsl2PMLEverBeforeInmame Counter32, hwadsl2PMLEverBeforeInmaiat OCTET STRING, hwadsl2PMLEverBeforeFecs Counter32, hwadsl2PMLEverBeforeEs Counter32, hwadsl2PMLEverBeforeSes Counter32, hwadsl2PMLEverBeforeLoss Counter32, hwadsl2PMLEverBeforeUas Counter32, hwadsl2PMLCurr15MStartTime DateAndTime, hwadsl2PMLCurr1DayStartTime DateAndTime, hwadsl2PMLCurr15MLofs Counter32, hwadsl2PMLCurr15MLols Counter32, hwadsl2PMLCurr15MLops Counter32, hwadsl2PMLCurr1DayLofs Counter32, hwadsl2PMLCurr1DayLols Counter32, hwadsl2PMLCurr1DayLops Counter32, hwadsl2PMLEverBeforeLofs Counter32, hwadsl2PMLEverBeforeLols Counter32, hwadsl2PMLEverBeforeLops Counter32, hwadsl2PMLCurr15MLeftrs Counter32, hwadsl2PMLCurr15MEfb Counter32, hwadsl2PMLCurr15MMinEftr Counter32, hwadsl2PMLCurr1DayLeftrs Counter32, hwadsl2PMLCurr1DayEfb Counter32, hwadsl2PMLCurr1DayMinEftr Counter32, hwadsl2PMLEverBeforeLeftrs Counter32, hwadsl2PMLEverBeforeEfb Counter32, hwadsl2PMLEverBeforeMinEftr Counter32 } hwadsl2PMLCurr15MInmainpeq OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..68)) MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is a count of the INMAINPEQi anomalies occurring on the line during current 15 minutes. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { hwadsl2PMLineCurrEntry 1 } hwadsl2PMLCurr15MInmame OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is a count of the INMAME anomalies occurring on the line during current 15 minutes. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { hwadsl2PMLineCurrEntry 2 } hwadsl2PMLCurr15MInmaiat OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is a count of the INMAIATi anomalies occurring on the line during current 15 minutes. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { hwadsl2PMLineCurrEntry 3 } hwadsl2PMLCurr1DayInmainpeq OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..68)) MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is a count of the INMAINPEQi anomalies occurring on the line during current 1 day. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { hwadsl2PMLineCurrEntry 4 } hwadsl2PMLCurr1DayInmame OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is a count of the INMAME anomalies occurring on the line during current 1 day. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { hwadsl2PMLineCurrEntry 5 } hwadsl2PMLCurr1DayInmaiat OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is a count of the INMAIATi anomalies occurring on the line during current 1 day. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { hwadsl2PMLineCurrEntry 6 } hwadsl2PMLEverBeforeInmainpeq OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..68)) MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is a count of the INMAINPEQi anomalies occurring on the line ever before. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { hwadsl2PMLineCurrEntry 7 } hwadsl2PMLEverBeforeInmame OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is a count of the INMAME anomalies occurring on the line ever before. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { hwadsl2PMLineCurrEntry 8 } hwadsl2PMLEverBeforeInmaiat OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is a count of the INMAIATi anomalies occurring on the line ever before. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { hwadsl2PMLineCurrEntry 9 } hwadsl2PMLEverBeforeFecs OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds since agent reset that there was at least one FEC correction event for one or more bearer channels in this line. This parameter is inhibited during UAS or SES. Unit: seconds " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { hwadsl2PMLineCurrEntry 10 } hwadsl2PMLEverBeforeEs OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds since agent reset that there was: ATU-C: CRC-8 >= 1 for one or more bearer channels OR LOS >= 1 OR SEF >= 1 OR LPR >= 1 ATU-R: FEBE >= 1 for one or more bearer channels OR LOS-FE >= 1 OR RDI >= 1 OR LPR-FE >= 1. This parameter is inhibited during UAS. Unit: seconds " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { hwadsl2PMLineCurrEntry 11 } hwadsl2PMLEverBeforeSes OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds since agent reset that there was: ATU-C: (CRC-8 summed over all bearer channels) >= 18 OR LOS >= 1 OR SEF >= 1 OR LPR >= 1 ATU-R: (FEBE summed over all bearer channels) >= 18 OR LOS-FE >= 1 OR RDI >= 1 OR LPR-FE >= 1 This parameter is inhibited during UAS. Unit: seconds " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { hwadsl2PMLineCurrEntry 12 } hwadsl2PMLEverBeforeLoss OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds since agent reset that there was LOS (or LOS-FE for ATU-R). Unit: seconds " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { hwadsl2PMLineCurrEntry 13 } hwadsl2PMLEverBeforeUas OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds in Unavailability State since agent reset. Unavailability begins at the onset of 10 contiguous severely -errored seconds, and ends at the onset of 10 contiguous seconds with no severely-errored seconds. Unit: seconds " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { hwadsl2PMLineCurrEntry 14 } hwadsl2PMLCurr15MStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Start time of the current 15-minute performance statistics." ::= { hwadsl2PMLineCurrEntry 15 } hwadsl2PMLCurr1DayStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Start time of the current 1-day performance statistics." ::= { hwadsl2PMLineCurrEntry 16 } hwadsl2PMLCurr15MLofs OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds in the current 15 minute interval when there was Loss of Framing. Unit: seconds " ::= { hwadsl2PMLineCurrEntry 17 } hwadsl2PMLCurr15MLols OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds in the current 15 minute interval when there was Loss of Link. Unit: seconds " ::= { hwadsl2PMLineCurrEntry 18 } hwadsl2PMLCurr15MLops OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds in the current 15 minute interval when there was Loss of Power. Unit: seconds " ::= { hwadsl2PMLineCurrEntry 19 } hwadsl2PMLCurr1DayLofs OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the number of seconds when there was Loss of Framing during the current day. Unit: seconds " ::= { hwadsl2PMLineCurrEntry 20 } hwadsl2PMLCurr1DayLols OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the number of seconds when there was Loss of Link during the current day. Unit: seconds " ::= { hwadsl2PMLineCurrEntry 21 } hwadsl2PMLCurr1DayLops OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the number of seconds when there was Loss of Power during the current day. Unit: seconds " ::= { hwadsl2PMLineCurrEntry 22 } hwadsl2PMLEverBeforeLofs OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the number of seconds when there was Loss of Framing since agent reset. Unit: seconds " ::= { hwadsl2PMLineCurrEntry 23 } hwadsl2PMLEverBeforeLols OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the number of seconds when there was Loss of Link since agent reset. Unit: seconds " ::= { hwadsl2PMLineCurrEntry 24 } hwadsl2PMLEverBeforeLops OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the number of seconds when there was Loss of Power since agent reset. Unit: seconds " ::= { hwadsl2PMLineCurrEntry 25 } hwadsl2PMLCurr15MLeftrs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "If retransmission is used in a given transmit direction, this parameter is a count of the seconds with a near-end leftr defect present observed over the 15 minutes accumulation period. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1.1.6 7.2.1.2.6" ::= { hwadsl2PMLineCurrEntry 26 } hwadsl2PMLCurr15MEfb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "If retransmission is used in a given transmit direction, this parameter is a count of the number of error-free bits observed over the 15 minutes accumulation period. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1.1.7 7.2.1.2.7" ::= { hwadsl2PMLineCurrEntry 27 } hwadsl2PMLCurr15MMinEftr OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "If retransmission is used in a given transmit direction, this parameter reports the minimum of the EFTR(Error-free throughput rate) observed over the 15 minutes accumulation period. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1.1.8 7.2.1.2.8" ::= { hwadsl2PMLineCurrEntry 28 } hwadsl2PMLCurr1DayLeftrs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "If retransmission is used in a given transmit direction, this parameter is a count of the seconds with a near-end leftr defect present observed over the 24 hours accumulation period. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1.1.6 7.2.1.2.6" ::= { hwadsl2PMLineCurrEntry 29 } hwadsl2PMLCurr1DayEfb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "If retransmission is used in a given transmit direction, this parameter is a count of the number of error-free bits observed over the 24 hours accumulation period. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1.1.7 7.2.1.2.7" ::= { hwadsl2PMLineCurrEntry 30 } hwadsl2PMLCurr1DayMinEftr OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "If retransmission is used in a given transmit direction, this parameter reports the minimum of the EFTR(Error-free throughput rate) observed over the 24 hours accumulation period. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1.1.8 7.2.1.2.8" ::= { hwadsl2PMLineCurrEntry 31} hwadsl2PMLEverBeforeLeftrs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "If retransmission is used in a given transmit direction, this parameter is a count of the seconds with a near-end leftr defect present observed ever before. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1.1.6 7.2.1.2.6" ::= { hwadsl2PMLineCurrEntry 32 } hwadsl2PMLEverBeforeEfb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "If retransmission is used in a given transmit direction, this parameter is a count of the number of error-free bits observed ever before. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1.1.7 7.2.1.2.7" ::= { hwadsl2PMLineCurrEntry 33 } hwadsl2PMLEverBeforeMinEftr OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "If retransmission is used in a given transmit direction, this parameter reports the minimum of the EFTR(Error-free throughput rate) observed ever before. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1.1.7 7.2.1.2.7" ::= { hwadsl2PMLineCurrEntry 34 } -- PM line Hist15Min counters hwadsl2PMLineHist15MinTable OBJECT-TYPE SYNTAX SEQUENCE OF Hwadsl2PMLineHist15MinEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table hwadsl2PMLineHist15MinTable contains Performance Monitoring results of ADSL2 line at last 15 minutes. The PM counters in the table are not reset even when the xtU is reinitialized. They are re-initialized only when the agent itself is reset or reinitialized. The indexes of this table are ifIndex, adsl2PMLHist15MUnit and adsl2PMLHist15MInterval. " ::= { hwadsl2PMLine 2 } hwadsl2PMLineHist15MinEntry OBJECT-TYPE SYNTAX Hwadsl2PMLineHist15MinEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table hwadsl2PMLineHist15MinTable contains Performance Monitoring results of ADSL2 line at last 15 minutes. The PM counters in the table are not reset even when the xtU is reinitialized. They are re-initialized only when the agent itself is reset or reinitialized. The indexes of this entry are ifIndex, adsl2PMLHist15MUnit and adsl2PMLHist15MInterval. " INDEX { ifIndex, adsl2PMLHist15MUnit, adsl2PMLHist15MInterval } ::= { hwadsl2PMLineHist15MinTable 1 } Hwadsl2PMLineHist15MinEntry ::= SEQUENCE { hwadsl2PMLHist15MInmainpeq OCTET STRING, hwadsl2PMLHist15MInmame Counter32, hwadsl2PMLHist15MInmaiat OCTET STRING, hwadsl2PMLHist15MStartTime DateAndTime, hwadsl2PMLHist15MLofs Counter32, hwadsl2PMLHist15MLols Counter32, hwadsl2PMLHist15MLops Counter32, hwadsl2PMLHist15MLeftrs Counter32, hwadsl2PMLHist15MEfb Counter32, hwadsl2PMLHist15MMinEftr Counter32 } hwadsl2PMLHist15MInmainpeq OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..68)) MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is a count of the INMAINPEQi anomalies occurring on the line at last 15 minutes. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { hwadsl2PMLineHist15MinEntry 1 } hwadsl2PMLHist15MInmame OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is a count of the INMAME anomalies occurring on the line at last 15 minutes. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { hwadsl2PMLineHist15MinEntry 2} hwadsl2PMLHist15MInmaiat OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is a count of the INMAIATi anomalies occurring on the line at last 15 minutes. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { hwadsl2PMLineHist15MinEntry 3} hwadsl2PMLHist15MStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Start time of the historical 15-minute performance statistics." ::= { hwadsl2PMLineHist15MinEntry 4 } hwadsl2PMLHist15MLofs OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds in the interval when there was Loss of Framing. Unit: seconds " ::= { hwadsl2PMLineHist15MinEntry 5 } hwadsl2PMLHist15MLols OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds in the interval when there was Loss of Link. Unit: seconds " ::= { hwadsl2PMLineHist15MinEntry 6 } hwadsl2PMLHist15MLops OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds in the interval when there was Loss of Power. Unit: seconds " ::= { hwadsl2PMLineHist15MinEntry 7 } hwadsl2PMLHist15MLeftrs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "If retransmission is used in a given transmit direction, this parameter is a count of the seconds with a near-end leftr defect present observed over the 15 minutes accumulation period. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1.1.6 7.2.1.2.6" ::= { hwadsl2PMLineHist15MinEntry 8 } hwadsl2PMLHist15MEfb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "If retransmission is used in a given transmit direction, this parameter is a count of the number of error-free bits observed over the 15 minutes accumulation period. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1.1.7 7.2.1.2.7" ::= { hwadsl2PMLineHist15MinEntry 9 } hwadsl2PMLHist15MMinEftr OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "If retransmission is used in a given transmit direction, this parameter reports the minimum of the EFTR(Error-free throughput rate) observed over the 15 minutes accumulation period. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1.1.8 7.2.1.2.8" ::= { hwadsl2PMLineHist15MinEntry 10 } -- PM lineHist1Day counters hwadsl2PMLineHist1DayTable OBJECT-TYPE SYNTAX SEQUENCE OF Hwadsl2PMLineHist1DayEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table hwadsl2PMLineHist1DayTable contains Performance Monitoring results of ADSL2 line at last 1 day. The PM counters in the table are not reset even when the xtU is reinitialized. They are re-initialized only when the agent itself is reset or reinitialized. The indexes of this table are ifIndex, adsl2PMLHist1DUnit and adsl2PMLHist1DInterval. " ::= { hwadsl2PMLine 3 } hwadsl2PMLineHist1DayEntry OBJECT-TYPE SYNTAX Hwadsl2PMLineHist1DayEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table hwadsl2PMLineHist1DayTable contains Performance Monitoring results of ADSL2 line at last 1 day. The PM counters in the table are not reset even when the xtU is reinitialized. They are re-initialized only when the agent itself is reset or reinitialized. The indexes of this entry are ifIndex, adsl2PMLHist1DUnit and adsl2PMLHist1DInterval. " INDEX { ifIndex, adsl2PMLHist1DUnit, adsl2PMLHist1DInterval } ::= { hwadsl2PMLineHist1DayTable 1 } Hwadsl2PMLineHist1DayEntry ::= SEQUENCE { hwadsl2PMLHist1DayInmainpeq OCTET STRING, hwadsl2PMLHist1DayInmame Counter32, hwadsl2PMLHist1DayInmaiat OCTET STRING, hwadsl2PMLHist1DayStartTime DateAndTime, hwadsl2PMLHist1DayLofs Counter32, hwadsl2PMLHist1DayLols Counter32, hwadsl2PMLHist1DayLops Counter32, hwadsl2PMLHist1DLeftrs Counter32, hwadsl2PMLHist1DEfb Counter32, hwadsl2PMLHist1DMinEftr Counter32 } hwadsl2PMLHist1DayInmainpeq OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..68)) MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is a count of the INMAINPEQi anomalies occurring on the line at last 1 day. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { hwadsl2PMLineHist1DayEntry 1 } hwadsl2PMLHist1DayInmame OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is a count of the INMAME anomalies occurring on the line at last 1 day. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { hwadsl2PMLineHist1DayEntry 2 } hwadsl2PMLHist1DayInmaiat OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is a count of the INMAIATi anomalies occurring on the line at last 1 day. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { hwadsl2PMLineHist1DayEntry 3 } hwadsl2PMLHist1DayStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Start time of the historical 1-day performance statistics." ::= { hwadsl2PMLineHist1DayEntry 4 } hwadsl2PMLHist1DayLofs OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds during this interval that there was Loss of Framing. Unit: seconds " ::= { hwadsl2PMLineHist1DayEntry 5 } hwadsl2PMLHist1DayLols OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds during this interval that there was Loss of Link. Unit: seconds " ::= { hwadsl2PMLineHist1DayEntry 6 } hwadsl2PMLHist1DayLops OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds during this interval that there was Loss of Power. Unit: seconds " ::= { hwadsl2PMLineHist1DayEntry 7 } hwadsl2PMLHist1DLeftrs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "If retransmission is used in a given transmit direction, this parameter is a count of the seconds with a near-end leftr defect present observed over the 24 hours accumulation period. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1.1.6 7.2.1.2.6" ::= { hwadsl2PMLineHist1DayEntry 8 } hwadsl2PMLHist1DEfb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "If retransmission is used in a given transmit direction, this parameter is a count of the number of error-free bits observed over the 24 hours accumulation period. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1.1.7 7.2.1.2.7" ::= { hwadsl2PMLineHist1DayEntry 9 } hwadsl2PMLHist1DMinEftr OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "If retransmission is used in a given transmit direction, this parameter reports the minimum of the EFTR(Error-free throughput rate) observed over the 24 hours accumulation period. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1.1.8 7.2.1.2.8" ::= { hwadsl2PMLineHist1DayEntry 10 } -- PM lineCurrInit counters hwadsl2PMLineCurrInitTable OBJECT-TYPE SYNTAX SEQUENCE OF Hwadsl2PMLineCurrInitEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table hwadsl2PMLineCurrInitTable contains current initialization counters of the ADSL2 line. The PM counters in the table are not reset even when the XTU is reinitialized. They are reinitialized only when the agent itself is reset or reinitialized. The index of this table is ifIndex. " ::= { hwadsl2PMLine 4 } hwadsl2PMLineCurrInitEntry OBJECT-TYPE SYNTAX Hwadsl2PMLineCurrInitEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table hwadsl2PMLineCurrInitTable contains current initialization counters of the ADSL2 line. The PM counters in the table are not reset even when the XTU is reinitialized. They are reinitialized only when the agent itself is reset or reinitialized. The index of this entry is ifIndex. " INDEX { ifIndex } ::= { hwadsl2PMLineCurrInitTable 1 } Hwadsl2PMLineCurrInitEntry ::= SEQUENCE { hwadsl2PMLInitEverBeforeFullInits Unsigned32, hwadsl2PMLInitEverBeforeFailedFullInits Unsigned32, hwadsl2PMLInitEverBeforeShortInits Unsigned32, hwadsl2PMLInitEverBeforeFailedShortInits Unsigned32, hwadsl2PMLineCurrInit15MStartTime DateAndTime, hwadsl2PMLineCurrInit1DayStartTime DateAndTime } hwadsl2PMLInitEverBeforeFullInits OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of full initializations attempted on the line (successful and failed) since agent reset. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { hwadsl2PMLineCurrInitEntry 1 } hwadsl2PMLInitEverBeforeFailedFullInits OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of failed full initializations on the line since agent reset. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { hwadsl2PMLineCurrInitEntry 2 } hwadsl2PMLInitEverBeforeShortInits OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of short initializations attempted on the line (successful and failed) since agent reset. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { hwadsl2PMLineCurrInitEntry 3 } hwadsl2PMLInitEverBeforeFailedShortInits OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of failed short initializations on the line since agent reset. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { hwadsl2PMLineCurrInitEntry 4 } hwadsl2PMLineCurrInit15MStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Start time of the current init 15-minute performance statistics." ::= { hwadsl2PMLineCurrInitEntry 5 } hwadsl2PMLineCurrInit1DayStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Start time of the current init 1-day performance statistics." ::= { hwadsl2PMLineCurrInitEntry 6 } -- PM lineInitHist15Min counters hwadsl2PMLineInitHist15MinTable OBJECT-TYPE SYNTAX SEQUENCE OF Hwadsl2PMLineInitHist15MinEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table hwadsl2PMLineInitHist15MinTable contains Performance Monitoring results of ADSL2 line initialize at last 15 minutes. The PM counters in the table are not reset even when the xtU is reinitialized. They are re-initialized only when the agent itself is reset or reinitialized. The indexes of this table are ifIndex and adsl2PMLHistInit15MInterval. " ::= { hwadsl2PMLine 5 } hwadsl2PMLineInitHist15MinEntry OBJECT-TYPE SYNTAX Hwadsl2PMLineInitHist15MinEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table hwadsl2PMLineInitHist15MinTable contains Performance Monitoring results of ADSL2 line initialize at last 15 minutes. The PM counters in the table are not reset even when the xtU is reinitialized. They are re-initialized only when the agent itself is reset or reinitialized. The indexes of this entry are ifIndex and adsl2PMLHistInit15MInterval. " INDEX { ifIndex, adsl2PMLHistInit15MInterval } ::= { hwadsl2PMLineInitHist15MinTable 1 } Hwadsl2PMLineInitHist15MinEntry ::= SEQUENCE { hwadsl2PMLineInitHist15MinStartTime DateAndTime } hwadsl2PMLineInitHist15MinStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Start time of the historical init 15-minute performance statistics." ::= { hwadsl2PMLineInitHist15MinEntry 1 } -- PM lineInitHist1Day counters hwadsl2PMLineInitHist1DayTable OBJECT-TYPE SYNTAX SEQUENCE OF Hwadsl2PMLineInitHist1DayEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table hwadsl2PMLineInitHist1DayTable contains Performance Monitoring results of ADSL2 line initialize at last one day. The indexes of this table are ifIndex and adsl2PMLHistinit1DInterval. " ::= { hwadsl2PMLine 6 } hwadsl2PMLineInitHist1DayEntry OBJECT-TYPE SYNTAX Hwadsl2PMLineInitHist1DayEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table hwadsl2PMLineInitHist1DayTable contains Performance Monitoring results of ADSL2 line initialize at last one day. The indexes of this entry are ifIndex and adsl2PMLHistinit1DInterval. " INDEX { ifIndex, adsl2PMLHistinit1DInterval } ::= { hwadsl2PMLineInitHist1DayTable 1 } Hwadsl2PMLineInitHist1DayEntry ::= SEQUENCE { hwadsl2PMLineInitHist1DayStartTime DateAndTime } hwadsl2PMLineInitHist1DayStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Start time of the historical init 1-day performance statistics." ::= { hwadsl2PMLineInitHist1DayEntry 1 } -- PM channel current counters hwadsl2PMChCurrTable OBJECT-TYPE SYNTAX SEQUENCE OF Hwadsl2PMChCurrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table hwadsl2PMChCurrTable contains some extended current Performance Monitoring results of the ADSL2 channel. The PM counters in the table are not reset even when the XTU is reinitialized. They are reinitialized only when the agent itself is reset or reinitialized. The indexes of this table are ifIndex and adsl2PMChCurrUnit. " ::= { hwadsl2PMChannel 1 } hwadsl2PMChCurrEntry OBJECT-TYPE SYNTAX Hwadsl2PMChCurrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table hwadsl2PMChCurrTable contains some extended current Performance Monitoring results of the ADSL2 channel. The PM counters in the table are not reset even when the XTU is reinitialized. They are reinitialized only when the agent itself is reset or reinitialized. The indexes of this entry are ifIndex and adsl2PMChCurrUnit. " INDEX { ifIndex, adsl2PMChCurrUnit } ::= { hwadsl2PMChCurrTable 1 } Hwadsl2PMChCurrEntry ::= SEQUENCE { hwadsl2PMChCurr15MRtxCW Counter32, hwadsl2PMChCurr15MRtxCorrectedCW Counter32, hwadsl2PMChCurr15MRtxUncorrectedCW Counter32, hwadsl2PMChCurr1DayRtxCW Counter32, hwadsl2PMChCurr1DayRtxCorrectedCW Counter32, hwadsl2PMChCurr1DayRtxUncorrectedCW Counter32, hwadsl2PMChEverBeforeRtxCW Counter32, hwadsl2PMChEverBeforeRtxCorrectedCW Counter32, hwadsl2PMChEverBeforeRtxUncorrectedCW Counter32, hwadsl2PMChEverBeforeCodingViolations Unsigned32, hwadsl2PMChEverBeforeCorrectedBlocks Unsigned32, hwadsl2PMChCur15MStartTime DateAndTime, hwadsl2PMChCur1DayStartTime DateAndTime } hwadsl2PMChCurr15MRtxCW OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of units request retransmission on this channel within the current 15 minute interval. " ::= { hwadsl2PMChCurrEntry 1 } hwadsl2PMChCurr15MRtxCorrectedCW OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of units corrected by retransmission on this channel within the current 15 minute interval. " ::= { hwadsl2PMChCurrEntry 2 } hwadsl2PMChCurr15MRtxUncorrectedCW OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of units uncorrected by retransmission on this channel within the current 15 minute interval. " ::= { hwadsl2PMChCurrEntry 3 } hwadsl2PMChCurr1DayRtxCW OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of units request retransmission on this channel during the current day. " ::= { hwadsl2PMChCurrEntry 4 } hwadsl2PMChCurr1DayRtxCorrectedCW OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of units corrected by retransmission on this channel during the current day. " ::= { hwadsl2PMChCurrEntry 5 } hwadsl2PMChCurr1DayRtxUncorrectedCW OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of units uncorrected by retransmission on this channel during the current day. " ::= { hwadsl2PMChCurrEntry 6 } hwadsl2PMChEverBeforeRtxCW OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of units request retransmission on this channel ever before. " ::= { hwadsl2PMChCurrEntry 7 } hwadsl2PMChEverBeforeRtxCorrectedCW OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of units corrected by retransmission on this channel ever before. " ::= { hwadsl2PMChCurrEntry 8 } hwadsl2PMChEverBeforeRtxUncorrectedCW OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of units uncorrected by retransmission on this channel ever before. " ::= { hwadsl2PMChCurrEntry 9 } hwadsl2PMChEverBeforeCodingViolations OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of CRC-8 (FEBE for ATU-R) anomalies occurring in the channel since agent reset. This parameter is inhibited during UAS or SES. If the CRC is applied over multiple channels, then each related CRC-8 (or FEBE) anomaly should increment each of the counters related to the individual channels. " REFERENCE "ITU-T G.997.1, paragraph 7.2.2" ::= { hwadsl2PMChCurrEntry 10 } hwadsl2PMChEverBeforeCorrectedBlocks OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of FEC (FFEC for ATU-R) anomalies (corrected code words) occurring in the channel since agent reset. This parameter is inhibited during UAS or SES. If the FEC is applied over multiple channels, then each related FEC (or FFEC) anomaly should increment each of the counters related to the individual channels. " REFERENCE "ITU-T G.997.1, paragraph 7.2.2" ::= { hwadsl2PMChCurrEntry 11 } hwadsl2PMChCur15MStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Start time of the channel current 15-minute performance statistics." ::= { hwadsl2PMChCurrEntry 12 } hwadsl2PMChCur1DayStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Start time of the channel current 1-day performance statistics." ::= { hwadsl2PMChCurrEntry 13 } -- PM channel history 15 Minutes hwadsl2PMChHist15MinTable OBJECT-TYPE SYNTAX SEQUENCE OF Hwadsl2PMChHist15MinEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table hwadsl2PMChHist15MinTable contains PM channel history for 15min intervals of the ADSL2 channel. The indexes of this table are ifIndex,adsl2PMChHist15MUnit and adsl2PMChHist15MInterval. " ::= { hwadsl2PMChannel 2 } hwadsl2PMChHist15MinEntry OBJECT-TYPE SYNTAX Hwadsl2PMChHist15MinEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table hwadsl2PMChHist15MinTable contains PM channel history for 15min intervals of the ADSL2 channel. The indexes of this entry are ifIndex,adsl2PMChHist15MUnit and adsl2PMChHist15MInterval. " INDEX { ifIndex, adsl2PMChHist15MUnit, adsl2PMChHist15MInterval } ::= { hwadsl2PMChHist15MinTable 1 } Hwadsl2PMChHist15MinEntry ::= SEQUENCE { hwadsl2PMChHist15MRtxCW Counter32, hwadsl2PMChHist15MRtxCorrectedCW Counter32, hwadsl2PMChHist15MRtxUncorrectedCW Counter32, hwadsl2PMChHist15MStartTime DateAndTime } hwadsl2PMChHist15MRtxCW OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of units request retransmission on this channel within the last 15 minutes interval. " ::= { hwadsl2PMChHist15MinEntry 1 } hwadsl2PMChHist15MRtxCorrectedCW OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of units corrected by retransmission on this channel within the last 15 minutes interval. " ::= { hwadsl2PMChHist15MinEntry 2 } hwadsl2PMChHist15MRtxUncorrectedCW OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of units uncorrected by retransmission on this channel within the last 15 minutes interval. " ::= { hwadsl2PMChHist15MinEntry 3 } hwadsl2PMChHist15MStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Start time of the historical 15-minute performance statistics." ::= { hwadsl2PMChHist15MinEntry 4 } -- PM channel history 1 Day hwadsl2PMChHist1DTable OBJECT-TYPE SYNTAX SEQUENCE OF Hwadsl2PMChHist1DEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table hwadsl2PMChHist1DayTable contains some extended PM channel history for 1-day intervals of ADSL2. The indexes of this table are ifIndex,adsl2PMChHist1DUnit and adsl2PMChHist1DInterval. " ::= { hwadsl2PMChannel 3 } hwadsl2PMChHist1DEntry OBJECT-TYPE SYNTAX Hwadsl2PMChHist1DEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table hwadsl2PMChHist1DayTable contains some extended PM channel history for 1-day intervals of ADSL2. The indexes of this entry are ifIndex,adsl2PMChHist1DUnit and adsl2PMChHist1DInterval. " INDEX { ifIndex, adsl2PMChHist1DUnit, adsl2PMChHist1DInterval } ::= { hwadsl2PMChHist1DTable 1 } Hwadsl2PMChHist1DEntry ::= SEQUENCE { hwadsl2PMChHist1DRtxCW Counter32, hwadsl2PMChHist1DRtxCorrectedCW Counter32, hwadsl2PMChHist1DRtxUncorrectedCW Counter32, hwadsl2PMChHist1DStartTime DateAndTime } hwadsl2PMChHist1DRtxCW OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of units request retransmission on this channel within the last 1 day interval. " ::= { hwadsl2PMChHist1DEntry 1 } hwadsl2PMChHist1DRtxCorrectedCW OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of units corrected by retransmission on this channel within the last 1 day interval. " ::= { hwadsl2PMChHist1DEntry 2 } hwadsl2PMChHist1DRtxUncorrectedCW OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of units uncorrected by retransmission on this channel within the last 1 day interval. " ::= { hwadsl2PMChHist1DEntry 3 } hwadsl2PMChHist1DStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Start time of the historical 1-day performance statistics." ::= { hwadsl2PMChHist1DEntry 4 } -- hwadsl2LineTable hwadsl2LineTable OBJECT-TYPE SYNTAX SEQUENCE OF Hwadsl2LineEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table hwadsl2LineTable contains configuration, command, and status parameters of the ADSL2 line. The index of this table is an interface index where the interface has an ifType of adsl2plus(238). Several objects in this table MUST be maintained in a persistent manner. " ::= { hwadsl2Line 1 } hwadsl2LineEntry OBJECT-TYPE SYNTAX Hwadsl2LineEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table hwadsl2LineTable contains configuration, command, and status parameters of the ADSL2 line. The index of this entry is an interface index where the interface has an ifType of adsl2plus(238). Several objects in this table MUST be maintained in a persistent manner. " INDEX { ifIndex } ::= { hwadsl2LineTable 1 } Hwadsl2LineEntry ::= SEQUENCE { hwadsl2LineStatusCodingGainDsInfo Unsigned32, hwadsl2LineStatusCodingGainUsInfo Unsigned32, hwadsl2LineStatusPcbDsInfo Unsigned32, hwadsl2LineStatusPcbUsInfo Unsigned32, hwadsl2DynamicprofileInfo OCTET STRING, hwadsl2LineStatusInitResult Hwadsl2InitResult, hwadsl2LineStatusRtxUsedDs Adsl2StatusRtxUsed, hwadsl2LineStatusLastRetrainInfo INTEGER, hwadsl2LineStatusLineRateDs Unsigned32, hwadsl2LineStatusLineRateUs Unsigned32 } hwadsl2LineStatusCodingGainDsInfo OBJECT-TYPE SYNTAX Unsigned32 UNITS "0.5 dB" MAX-ACCESS read-only STATUS current DESCRIPTION "The actual value of Coding gain upstream parameter,it ranges from 0 to 16 units of 0.5 dB. Unit: 0.5 dB " ::= { hwadsl2LineEntry 1 } hwadsl2LineStatusCodingGainUsInfo OBJECT-TYPE SYNTAX Unsigned32 UNITS "0.5 dB" MAX-ACCESS read-only STATUS current DESCRIPTION "The actual value of Coding gain downstream parameter,it ranges from 0 to 16 units of 0.5 dB. Unit: 0.5 dB " ::= { hwadsl2LineEntry 2 } hwadsl2LineStatusPcbDsInfo OBJECT-TYPE SYNTAX Unsigned32 UNITS "tenth dB" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates Power Cut-back on downstream direction. It ranges from 0 to 400 units of 0.1 dB (physical values are 0 to 40 dB). Unit: tenth dB " ::= { hwadsl2LineEntry 3 } hwadsl2LineStatusPcbUsInfo OBJECT-TYPE SYNTAX Unsigned32 UNITS "tenth dB" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates Power Cut-back on upstream direction. It ranges from 0 to 400 units of 0.1 dB (physical values are 0 to 40 dB) and the invalid value is 4294967295. Unit: tenth dB " ::= { hwadsl2LineEntry 4 } hwadsl2DynamicprofileInfo OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this object identifies the row in the ADSL Dynamic Profile Table,which applies to this ADSL line, and channels if applicable. NULL -Indicates that there is no Dynamic profile bound to this port. " ::= { hwadsl2LineEntry 5 } hwadsl2LineStatusInitResult OBJECT-TYPE SYNTAX Hwadsl2InitResult MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the result of the last full initialization performed on the line. Options: 1. noFail(0) - Successful initialization 2. configError(1) - Configuration failure 3. configNotFeasible(2) - Configuration details not supported 4. commFail(3) - Communication failure 5. noPeerXtu(4) - Peer xTU not detected 6. otherCause(5) - Other initialization failure reason 7. ginpNotSelected(6) - G.998.4 Retransmission mode was not selected while RTX_MODE = FORCED or with RTX_MODE = RTX_TESTMODE 8. invalidValue(-1) - Invalid value " REFERENCE "ITU-T G.997.1, paragraph 7.5.1.3" ::= { hwadsl2LineEntry 6 } hwadsl2LineStatusRtxUsedDs OBJECT-TYPE SYNTAX Adsl2StatusRtxUsed MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter specifies whether G.998.4 retransmission is used in a given transmit direction. Options: 1. rtxInuse(1) - RTX in use 2. rtxUnusedModeForbidden(2) - RTX not in use, due to RTX_MODE = FORBIDDEN 3. rtxUnusedNotSupportedXtuc(3) - RTX not in use, due to not supported by the XTU-C 4. rtxUnusedNotSupportedXtur(4) - RTX not in use, due to not supported by the XTU-R 5. rtxUnusedNotSupportedXtucAndXtur(5) - RTX not in use, due to not supported by the XTU-C and XTU-R 6. invalidValue(-1) - Invalid value " REFERENCE "ITU-T G.997.1, paragraph 7.5.1.38" ::= { hwadsl2LineEntry 7 } hwadsl2LineStatusLastRetrainInfo OBJECT-TYPE SYNTAX INTEGER { none(1), cpe-l3-trigger(2), lom-us-trigger-dra(3), lom-ds-trigger-dra(4), cpe-never-answer-oam(5), cpe-no-more-answer-oam(6), persistent-ncd-us(7), persistent-ncd-ds(8), persistent-lcd-us(9), persistent-lcd-ds(10), l2-problem-co-drop(11), l2-problem-cpe-drop(12), bitswap-refused-us-co-drop(13), bitswap-refused-us-cpe-drop(14), channel-change-us-co-drop(15), channel-change-us-cpe-drop(16), noise-increase-us-co-drop(17), noise-increase-us-cpe-drop(18), bitswap-refused-ds-co-drop(19), bitswap-refused-ds-cpe-drop(20), channel-change-ds-co-drop(21), channel-change-ds-cpe-drop(22), noise-increase-ds-co-drop(23), noise-increase-ds-cpe-drop(24), lom-us-co-drop(25), lom-us-cpe-drop(26), lom-ds-co-drop(27), lom-ds-cpe-drop(28), sra-problem-us-co-drop(29), sra-problem-us-cpe-drop(30), sra-failed-us-co-drop(31), sra-failed-us-cpe-drop(32), sra-problem-ds-co-drop(33), sra-problem-ds-cpe-drop(34), sra-rejected-ds-co-drop(35), sra-rejected-ds-cpe-drop(36), bitswap-problem-us-co-drop(37), bitswap-problem-us-cpe-drop(38), bitswap-failed-us-co-drop(39), bitswap-failed-us-cpe-drop(40), bitswap-problem-ds-co-drop(41), bitswap-problem-ds-cpe-drop(42), bitswap-rejected-ds-co-drop(43), bitswap-rejected-ds-cpe-drop(44), cpe-switched-off(45), cpe-lost(46), co-reset(47), co-stop(48), unknown(49) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the last retrained information performed on the line. Options: 1. none(1) - No record is available 2. cpe-l3-trigger(2) - The terminal initiates a low power consumption L3 request 3. lom-us-trigger-dra(3) - The upstream noise margin is smaller than the minimum noise margin in rate dynamic adjustment 4. lom-ds-trigger-dra(4) - The downstream noise margin is smaller than the minimum noise margin in rate dynamic adjustment 5. cpe-never-answer-oam(5) - No OAM response is received from the CPE all the time 6. cpe-no-more-answer-oam(6) - No OAM response is received from the CPE 7. persistent-ncd-us(7) - Upstream continuous no cell delineation 8. persistent-ncd-ds(8) - Downstream continuous no cell delineation 9. persistent-lcd-us(9) - Upstream continuous loss of cell delineation 10.persistent-lcd-ds(10) - Downstream continuous loss of cell delineation 11.l2-problem-co-drop(11) - The CO is faulty during the switching from L0 to L2 12.l2-problem-cpe-drop(12) - The CPE is faulty during the switching from L0 to L2 13.bitswap-refused-us-co-drop(13) - The CO goes offline when the upstream bit swap fault occurs 10 times consecutively 14.bitswap-refused-us-cpe-drop(14) - The CPE goes offline when the downstream bit swap fault occurs 10 times consecutively 15.channel-change-us-co-drop(15) - The CO goes offline when the upstream net rate changes 16.channel-change-us-cpe-drop(16) - The CPE goes offline when the upstream net rate changes 17.noise-increase-us-co-drop(17) - The CO goes offline when the upstream noise increases 18.noise-increase-us-cpe-drop(18) - The CPE goes offline when the upstream noise increases 19.bitswap-refused-ds-co-drop(19) - The CO goes offline when the downstream bit swap fault occurs 10 times consecutively 20.bitswap-refused-ds-cpe-drop(20) - The CPE goes offline when the downstream bit swap fault occurs 10 times consecutively 21.channel-change-ds-co-drop(21) - The CO goes offline when the downstream net rate changes 22.channel-change-ds-cpe-drop(22) - The CPE goes offline when the downstream net rate changes 23.noise-increase-ds-co-drop(23) - The CO goes offline when the downstream noise increases 24.noise-increase-ds-cpe-drop(24) - The CPE goes offline when the downstream noise increases 25.lom-us-co-drop(25) - The CO goes offline when the upstream noise margin is smaller than the minimum noise margin 26.lom-us-cpe-drop(26) - The CPE goes offline when the upstream noise margin is smaller than the minimum noise margin 27.lom-ds-co-drop(27) - The CO goes offline when the downstream noise margin is smaller than the minimum noise margin 28.lom-ds-cpe-drop(28) - The CPE goes offline when the downstream noise margin is smaller than the minimum noise margin 29.sra-problem-us-co-drop(29) - The CO goes offline when the upstream SRA is faulty 30.sra-problem-us-cpe-drop(30) - The CPE goes offline when the upstream SRA is faulty 31.sra-failed-us-co-drop(31) - The CO goes offline when the upstream SRA fails 32.sra-failed-us-cpe-drop(32) - The CPE goes offline when the upstream SRA fails 33.sra-problem-ds-co-drop(33) - The CO goes offline when the downstream SRA is fault 34.sra-problem-ds-cpe-drop(34) - The CPE goes offline when the downstream SRA is faulty 35.sra-rejected-ds-co-drop(35) - The CO goes offline when the downstream SRA is rejected 36.sra-rejected-ds-cpe-drop(36) - The CPE goes offline when the downstream SRA is rejected 37.bitswap-problem-us-co-drop(37) - The CO goes offline when the upstream bit swap is faulty 38.bitswap-problem-us-cpe-drop(38) - The CPE goes offline when the upstream bit swap is faulty 39.bitswap-failed-us-co-drop(39) - The CO goes offline when the upstream bit swap fails 40.bitswap-failed-us-cpe-drop(40) - The CPE goes offline when the upstream bit swap fails 41.bitswap-problem-ds-co-drop(41) - The CO goes offline when the downstream bit swap is faulty 42.bitswap-problem-ds-cpe-drop(42) - The CPE goes offline when the downstream bit swap is faulty 43.bitswap-rejected-ds-co-drop(43) - The CO goes offline when the downstream bit swap is rejected 44.bitswap-rejected-ds-cpe-drop(44) - The CPE goes offline when the downstream bit swap is rejected 45.cpe-switched-off(45) - The CPE power supply is shut down 46.cpe-lost(46) - The CPE is disconnected 47.co-reset(47) - The CO resets the chipset or line 48.co-stop(48) - The CO actively deactivate the port 49.unknown(49) - Unknown reason " ::= { hwadsl2LineEntry 8 } hwadsl2LineStatusLineRateDs OBJECT-TYPE SYNTAX Unsigned32 UNITS "bits/second" MAX-ACCESS read-only STATUS current DESCRIPTION "The actual line rate downstream. Unit: bits/second " ::= { hwadsl2LineEntry 9 } hwadsl2LineStatusLineRateUs OBJECT-TYPE SYNTAX Unsigned32 UNITS "bits/second" MAX-ACCESS read-only STATUS current DESCRIPTION "The actual line rate upstream. Unit: bits/second " ::= { hwadsl2LineEntry 10 } -- adsl2SCStatusTable hwadsl2SCStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF Hwadsl2SCStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table hwadsl2SCStatusTable contains status parameters of the ADSL2 sub-carriers. The following points apply to this table: 1. The main purpose of this table is to hold the results of a DELT. 2. This table also holds parameters obtained at line initialization time. 3. The rows in this table are volatile; that is, they are lost if the SNMP agent is rebooted. 4. Due to the large OCTET STRING attributes in this table, the worst case memory requirements for this table are very high. The manager may use the row status attribute of this table to delete rows in order to reclaim memory. 5. The manager may create rows in this table. The SNMP agent may create rows in this table. Only the manager may delete rows in this table. 6. The maximum number of rows allowable in this table is indicated by the scalar attribute adsl2ScalarSCMaxInterfaces. The number of rows available in this table is indicated by the scalar attribute adsl2ScalarSCAvailInterfaces. 7. The SNMP agent is permitted to create rows in this table when a DELT completes successfully or when line initialization occurs. It is not mandatory for the SNMP agent to create rows in this table; hence, it may be necessary for the manager to create rows in this table before any results can be stored. 8. If the manager attempts to create a row in this table and there are no more rows available, the creation attempt will fail, and the response to the SNMP SET PDU will contain the error noCreation(11). 9. If the SNMP agent attempts to create a row in this table and there are no more rows available, the creation attempt will fail, and the attribute adsl2LineCmndConfLdsfFailReason will indicate the reason for the failure. The failure reason will be either tableFull(10) or noResources(11). 10. An example of use of this table is as follows: Step 1. : The DELT is started by setting the : adsl2LineCmndConfLdsf from inhibit to force. Step 2. : The DELT completes, and valid data is : available. Step 3. : The row in the adsl2SCStatusTable where the : results will be stored does not yet exist so : the SNMP agent attempts to create the row. Step 4. : Due to a low memory condition, a row in the : adsl2SCStatusTable table cannot be created at : this time. Step 5. : The reason for the failure, tableFull(10), is : indicated in the adsl2LineCmndConfLdsfFailReason : attribute. 11. Another example of use of this table is as follows : Step 1. : The DELT is started by setting the : adsl2LineCmndConfLdsf from inhibit to force. Step 2. : The DELT completes and valid data is : available. Step 3. : The row in the adsl2SCStatusTable where the : results will be stored does not yet exist so : the SNMP agent attempts to create the row. Step 4. : The row creation is successful. Step 5. : The value of the attribute : adsl2LineCmndConfLdsfFailReasonreason is set : to success(2). 12. Another example of use of this table is as follows: Step 1. : The manager creates a row in adsl2SCStatusTable : for a particular ADSL2 line. Step 2. : The DELT is started on the above-mentioned : line by setting the adsl2LineCmndConfLdsf from : inhibit to force. Step 3. : The DELT completes, and valid data is : available. Step 4. : The value of the attribute : adsl2LineCmndConfLdsfFailReasonreason is set : to success(2). The indexes of this table are ifIndex and adsl2SCStatusDirection. " ::= { hwadsl2Status 2 } hwadsl2SCStatusEntry OBJECT-TYPE SYNTAX Hwadsl2SCStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table hwadsl2SCStatusTable contains status parameters of the ADSL2 sub-carriers. The following points apply to this table: 1. The main purpose of this table is to hold the results of a DELT. 2. This table also holds parameters obtained at line initialization time. 3. The rows in this table are volatile; that is, they are lost if the SNMP agent is rebooted. 4. Due to the large OCTET STRING attributes in this table, the worst case memory requirements for this table are very high. The manager may use the row status attribute of this table to delete rows in order to reclaim memory. 5. The manager may create rows in this table. The SNMP agent may create rows in this table. Only the manager may delete rows in this table. 6. The maximum number of rows allowable in this table is indicated by the scalar attribute adsl2ScalarSCMaxInterfaces. The number of rows available in this table is indicated by the scalar attribute adsl2ScalarSCAvailInterfaces. 7. The SNMP agent is permitted to create rows in this table when a DELT completes successfully or when line initialization occurs. It is not mandatory for the SNMP agent to create rows in this table; hence, it may be necessary for the manager to create rows in this table before any results can be stored. 8. If the manager attempts to create a row in this table and there are no more rows available, the creation attempt will fail, and the response to the SNMP SET PDU will contain the error noCreation(11). 9. If the SNMP agent attempts to create a row in this table and there are no more rows available, the creation attempt will fail, and the attribute adsl2LineCmndConfLdsfFailReason will indicate the reason for the failure. The failure reason will be either tableFull(10) or noResources(11). 10. An example of use of this table is as follows: Step 1. : The DELT is started by setting the : adsl2LineCmndConfLdsf from inhibit to force. Step 2. : The DELT completes, and valid data is : available. Step 3. : The row in the adsl2SCStatusTable where the : results will be stored does not yet exist so : the SNMP agent attempts to create the row. Step 4. : Due to a low memory condition, a row in the : adsl2SCStatusTable table cannot be created at : this time. Step 5. : The reason for the failure, tableFull(10), is : indicated in the adsl2LineCmndConfLdsfFailReason : attribute. 11. Another example of use of this table is as follows : Step 1. : The DELT is started by setting the : adsl2LineCmndConfLdsf from inhibit to force. Step 2. : The DELT completes and valid data is : available. Step 3. : The row in the adsl2SCStatusTable where the : results will be stored does not yet exist so : the SNMP agent attempts to create the row. Step 4. : The row creation is successful. Step 5. : The value of the attribute : adsl2LineCmndConfLdsfFailReasonreason is set : to success(2). 12. Another example of use of this table is as follows: Step 1. : The manager creates a row in adsl2SCStatusTable : for a particular ADSL2 line. Step 2. : The DELT is started on the above-mentioned : line by setting the adsl2LineCmndConfLdsf from : inhibit to force. Step 3. : The DELT completes, and valid data is : available. Step 4. : The value of the attribute : adsl2LineCmndConfLdsfFailReasonreason is set : to success(2). The indexes of this entry are ifIndex and adsl2SCStatusDirection. " INDEX { ifIndex, adsl2SCStatusDirection } ::= { hwadsl2SCStatusTable 1 } Hwadsl2SCStatusEntry ::= SEQUENCE { hwadsl2SCStatusInfoTxPSD OCTET STRING, hwadsl2SCStatusInfoSnrMargins OCTET STRING } hwadsl2SCStatusInfoTxPSD OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..1024)) UNITS "0.1 dBm/Hz" MAX-ACCESS read-only STATUS current DESCRIPTION "The PSD MASK per sub-carrier.An array of 512 16-bits values, designed for supporting up to 512 (downstream) sub-carriers. It ranges from -1400 to -300 units of 0.1 dBm/Hz (physical values are -140 to -30 dBm/Hz). Unit: 0.1 dBm/Hz " ::= { hwadsl2SCStatusEntry 1 } hwadsl2SCStatusInfoSnrMargins OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..1024)) UNITS "0.1 dB" MAX-ACCESS read-only STATUS current DESCRIPTION "SNR Margin is the maximum increase in dB of the noise power received at the ATU (ATU-R on downstream direction and ATU-C on upstream direction), such that the BER requirements are met for all bearer channels received at the ATU. It ranges from -640 to 630 units of 0.1 dB (physical values are -64 to 63 dB). Unit: 0.1 dB " ::= { hwadsl2SCStatusEntry 2 } -- adsl2ChAlarmConfProfileTable hwadsl2ChAlarmConfProfileTable OBJECT-TYPE SYNTAX SEQUENCE OF Hwadsl2ChAlarmConfProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table hwadsl2ChAlarmConfProfileTable contains ADSL2 channel PM thresholds profiles. Entries in this table MUST be maintained in a persistent manner. The index of this table is adsl2ChAlarmConfProfileName. " ::= { hwadsl2ProfileAlarmConf 1 } hwadsl2ChAlarmConfProfileEntry OBJECT-TYPE SYNTAX Hwadsl2ChAlarmConfProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table hwadsl2ChAlarmConfProfileTable contains ADSL2 channel PM thresholds profiles. Entries in this table MUST be maintained in a persistent manner. The index of this entry is adsl2ChAlarmConfProfileName. " INDEX { adsl2ChAlarmConfProfileName } ::= { hwadsl2ChAlarmConfProfileTable 1 } Hwadsl2ChAlarmConfProfileEntry ::= SEQUENCE { hwadsl2ChAlarmConfProfileMonitoringRateDs Unsigned32, hwadsl2ChAlarmConfProfileMonitoringRateUs Unsigned32 } hwadsl2ChAlarmConfProfileMonitoringRateDs OBJECT-TYPE SYNTAX Unsigned32(0..200000000) UNITS "bits/second" MAX-ACCESS read-create STATUS current DESCRIPTION "The channel monitoring rate downstream. When the value you set is larger than the value of the rate downstream defined in the channel profile, it will not be successful. The value 0 means that no threshold is specified for the associated counter. Unit: bits/second " DEFVAL { 0 } ::= { hwadsl2ChAlarmConfProfileEntry 1 } hwadsl2ChAlarmConfProfileMonitoringRateUs OBJECT-TYPE SYNTAX Unsigned32(0..200000000) UNITS "bits/second" MAX-ACCESS read-create STATUS current DESCRIPTION "The channel monitoring rate upstream. When the value you set is larger than the value of the rate upstream defined in the channel profile, it will not be successful. The value 0 means that no threshold is specified for the associated counter. Unit: bits/second " DEFVAL { 0 } ::= { hwadsl2ChAlarmConfProfileEntry 2 } -- mode INFO -- hwadsl2LineAlarmConfProfileTable hwadsl2LineAlarmConfProfileTable OBJECT-TYPE SYNTAX SEQUENCE OF Hwadsl2LineAlarmConfProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table hwadsl2LineAlarmConfProfileTable contains ADSL2 line PM thresholds profiles. A default profile with an index of 'DEFVAL' will always exist, and its parameters will be set to vendor- specific values, unless otherwise specified in this document. The index of this table is adsl2LineAlarmConfProfileName. " ::= { hwadsl2ProfileAlarmConf 2 } hwadsl2LineAlarmConfProfileEntry OBJECT-TYPE SYNTAX Hwadsl2LineAlarmConfProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table hwadsl2LineAlarmConfProfileTable contains ADSL2 line PM thresholds profiles. A default profile with an index of 'DEFVAL' will always exist, and its parameters will be set to vendor- specific values, unless otherwise specified in this document. The index of this entry is adsl2LineAlarmConfProfileName. " INDEX { adsl2LineAlarmConfProfileName } ::= { hwadsl2LineAlarmConfProfileTable 1 } Hwadsl2LineAlarmConfProfileEntry ::= SEQUENCE { hwadsl2LineAlarmConfProfileXturThresh15MinLeftrs HCPerfIntervalThreshold, hwAdsl2LineAlarmConfProfileDyingGaspAlarmSwitch INTEGER, hwAdsl2LineAlarmConfProfileActiveFailAlarmSwitch INTEGER } hwadsl2LineAlarmConfProfileXturThresh15MinLeftrs OBJECT-TYPE SYNTAX HCPerfIntervalThreshold UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "A threshold for the hwadsl2PMLCurr15MLeftrs counter, when adsl2PMLCurrUnit is ATUR {2}. The value 0 means that no threshold is specified for the associated counter. Unit: seconds " REFERENCE "ITU-T G.997.1, paragraph 7.3.1" DEFVAL { 0 } ::= { hwadsl2LineAlarmConfProfileEntry 1 } hwAdsl2LineAlarmConfProfileDyingGaspAlarmSwitch OBJECT-TYPE SYNTAX INTEGER { enable (1), disable (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object enable/disable the report of LOSS-OF-POWER alarm in an ADSL line. Options: 1. enable(1) - The report of LOSS-OF-POWER alarm in an ADSL line is enabled 2. disable(2) - The report of LOSS-OF-POWER alarm in an ADSL line is disabled " DEFVAL { enable } ::= { hwadsl2LineAlarmConfProfileEntry 2 } hwAdsl2LineAlarmConfProfileActiveFailAlarmSwitch OBJECT-TYPE SYNTAX INTEGER { enable (1), disable (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object enable/disable the active fail alarm switch. Options: 1. enable(1) - The active fail alarm switch is enabled 2. disable(2) - The active fail alarm switch is disabled " DEFVAL { enable } ::= { hwadsl2LineAlarmConfProfileEntry 3 } hwadslmodecfgCfg OBJECT-TYPE SYNTAX Adsl2CfgMode MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to change ADSL management mode. After the mode being changed, system will automatically save data and reboot. " ::= { hwadsl2Mode 1 } hwadslabrmodecfgCfg OBJECT-TYPE SYNTAX INTEGER { normalMode(1), ptMode(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to change abr-calculation mode. Options: 1. normalMode(1) - Normal abr-calculation mode 2. ptMode(2) - PT abr-calculation mode " ::= { hwadsl2Mode 2 } -- hwAdsl2TrapsVbOids hwadsl2LinePMThresholdItem OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..1024)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Indicate the threshold item." ::= { hwAdsl2TrapsVbOids 0 } hwadsl2LineTemplateID OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Indicate line template ID." ::= { hwAdsl2TrapsVbOids 1 } hwadsl2ActivationFailureCause OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..1024)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The reason of activation failure." ::= { hwAdsl2TrapsVbOids 2 } hwadsl2ChipsetID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The Chipset ID." ::= { hwAdsl2TrapsVbOids 3 } hwAdsl2SwitchResult OBJECT-TYPE SYNTAX INTEGER { success(0), fail(1) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Mode switch result. Options: 1. success(0) - Indicates that the adsl mode switch result is success 2. fail(1) - Indicates that the adsl mode switch result is fail " ::= { hwAdsl2TrapsVbOids 4 } hwAdsl2RequestID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Request ID." ::= { hwAdsl2TrapsVbOids 5 } hwadsl2LineCmndConfLdsfResult OBJECT-TYPE SYNTAX INTEGER { success(0), fail(1) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The result of the test. Options: 1. success(0) - Indicates that the test result is success 2. fail(1) - Indicates that the test result is fail " ::= { hwAdsl2TrapsVbOids 6 } hwadsl2LinePMThresholdValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Indicate the threshold value of threshold item." ::= { hwAdsl2TrapsVbOids 7 } hwadsl2LinePMCurrentValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Indicate the current value of threshold item." ::= { hwAdsl2TrapsVbOids 8 } hwadsl2ChPMThresholdValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Indicate the threshold value of threshold item." ::= { hwAdsl2TrapsVbOids 9 } hwadsl2ChPMCurrentValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Indicate the current value of threshold item." ::= { hwAdsl2TrapsVbOids 10 } -- NGADSL TRAP hwAdsl2ModeSwitchResultTrap NOTIFICATION-TYPE OBJECTS { hwAdsl2SwitchResult } STATUS current DESCRIPTION "Adsl2 mode switch result trap. This trap message is generated when the result of the recent ADSL mode switch process. " ::= { hwAdsl2CommonTraps 0 1 } hwAdsl2AdminModeTrap NOTIFICATION-TYPE OBJECTS { hwadslmodecfgCfg } STATUS current DESCRIPTION "Adsl2 administration mode trap. This trap message is generated when the ADSL mode is the system worked. " ::= { hwAdsl2CommonTraps 0 2 } hwAdsl2DeltOperResultTrap NOTIFICATION-TYPE OBJECTS { hwAdsl2RequestID, hwadsl2LineCmndConfLdsfResult } STATUS current DESCRIPTION "NGADSL delt trap. This trap message is generated when delt test result reported. " ::= { hwAdsl2CommonTraps 0 3 } hwAdsl2PortStatusChangeTrap NOTIFICATION-TYPE OBJECTS { hwFrameIndex, hwSlotIndex, hwPortIndex, hwPortOperStatus, hwPortPrimaryStatus, hwPortSecondaryStatus } STATUS current DESCRIPTION "Adsl2 port status change trap. This trap message is generated when port status changes. " ::= { hwAdsl2CommonTraps 0 4 } -- AlarmTraps hwadsl2PortAutoDeactiveAlarmTrap NOTIFICATION-TYPE OBJECTS { hwFrameIndex, hwSlotIndex, hwPortIndex } STATUS current DESCRIPTION "Port automatically trap. This trap message is generated when the ADSL port is automatically deactivated. The ADSL port is automatically deactivated due to the line fault. " ::= { hwadsl2AlarmTraps 0 0 } hwAdsl2PortReactiveAlarmTrap NOTIFICATION-TYPE OBJECTS { hwFrameIndex, hwSlotIndex, hwPortIndex } STATUS current DESCRIPTION "Port reactive trap. This trap message is generated when the ADSL port is re-activated after the ADSL line recovers. " ::= { hwadsl2AlarmTraps 0 1 } hwAdsl2PortATURPowerOffAlarmTrap NOTIFICATION-TYPE OBJECTS { hwFrameIndex, hwSlotIndex, hwPortIndex } STATUS current DESCRIPTION "Port ATU-R power off trap. This trap message is generated when ATU-R is powered off. " ::= { hwadsl2AlarmTraps 0 2 } hwAdsl2ChipsetRecoverAlarmTrap NOTIFICATION-TYPE OBJECTS { hwFrameIndex, hwSlotIndex, hwadsl2ChipsetID } STATUS current DESCRIPTION "Chipset recover trap. This trap message is generated when the ADSL chipset recovers. " ::= { hwadsl2AlarmTraps 0 3 } hwAdsl2PortDeactiveAlarmTrap NOTIFICATION-TYPE OBJECTS { hwFrameIndex, hwSlotIndex } STATUS current DESCRIPTION "Port deactive trap. This trap message is generated when some xDSL ports or all the xDSL ports are automatically deactivated. Some xDSL ports or all the xDSL ports are automatically deactivated due to lack of licenses. " ::= { hwadsl2AlarmTraps 0 4 } hwAdsl2LinePerformanceStatAlarmTrap NOTIFICATION-TYPE OBJECTS { hwFrameIndex, hwSlotIndex, hwPortIndex, hwadsl2LinePMThresholdItem, hwadsl2LinePMThresholdValue, hwadsl2LinePMCurrentValue } STATUS current DESCRIPTION "Line performance statistics trap. This trap message is generated when the line performance statistics of the ADSL port reach the threshold. " ::= { hwadsl2AlarmTraps 0 5 } hwAdsl2DownstreamActivationRateAlarmTrap NOTIFICATION-TYPE OBJECTS { hwFrameIndex, hwSlotIndex, hwPortIndex, adsl2ChStatusChannelNum, adsl2ChStatusActDataRate } STATUS current DESCRIPTION "ADSL channel downstream activation rate trap. This trap message is generated when the ADSL channel downstream activation rate is lower than the threshold. " ::= { hwadsl2AlarmTraps 0 6 } hwAdsl2ChannelPerformanceStatAlarmTrap NOTIFICATION-TYPE OBJECTS { hwFrameIndex, hwSlotIndex, hwPortIndex, adsl2ChStatusChannelNum, hwadsl2LinePMThresholdItem, hwadsl2ChPMThresholdValue, hwadsl2ChPMCurrentValue } STATUS current DESCRIPTION "Channel performance statistics trap. This trap message is generated when the channel performance statistics of the ADSL port reach the threshold. " ::= { hwadsl2AlarmTraps 0 7 } hwAdsl2UpstreamActivationRateAlarmTrap NOTIFICATION-TYPE OBJECTS { hwFrameIndex, hwSlotIndex, hwPortIndex, adsl2ChStatusChannelNum, adsl2ChStatusActDataRate } STATUS current DESCRIPTION "ADSL channel upstream activation rate trap. This trap message is generated when the ADSL channel upstream activation rate is lower than the threshold. " ::= { hwadsl2AlarmTraps 0 8 } hwAdsl2UpstreamRateIncreaseAlarmTrap NOTIFICATION-TYPE OBJECTS { hwFrameIndex, hwSlotIndex, hwPortIndex, adsl2ChStatusActDataRate } STATUS current DESCRIPTION "ADSL channel upstream rate increases trap. This trap message is generated when the ADSL channel upstream rate increases to a value higher than the threshold. " ::= { hwadsl2AlarmTraps 0 9 } hwAdsl2UpstreamRateDecreaseAlarmTrap NOTIFICATION-TYPE OBJECTS { hwFrameIndex, hwSlotIndex, hwPortIndex, adsl2ChStatusActDataRate } STATUS current DESCRIPTION "ADSL channel upstream rate decreases trap. This trap message is generated when the ADSL channel upstream rate decreases to a value lower than the threshold. " ::= { hwadsl2AlarmTraps 0 10 } hwAdsl2DownstreamRateIncreaseAlarmTrap NOTIFICATION-TYPE OBJECTS { hwFrameIndex, hwSlotIndex, hwPortIndex, adsl2ChStatusActDataRate } STATUS current DESCRIPTION "ADSL channel downstream rate increases trap. This trap message is generated when the ADSL channel downstream rate increases to a value higher than the threshold. " ::= { hwadsl2AlarmTraps 0 11 } hwAdsl2DownstreamRateDecreaseAlarmTrap NOTIFICATION-TYPE OBJECTS { hwFrameIndex, hwSlotIndex, hwPortIndex, adsl2ChStatusActDataRate } STATUS current DESCRIPTION "ADSL channel downstream rate decreases trap. This trap message is generated when the ADSL channel downstream rate decreases to a value lower than the threshold. " ::= { hwadsl2AlarmTraps 0 12 } hwAdsl2FailedActiveAlarmTrap NOTIFICATION-TYPE OBJECTS { hwFrameIndex, hwSlotIndex, hwPortIndex, hwadsl2LineTemplateID, hwadsl2ActivationFailureCause } STATUS current DESCRIPTION "Failed active trap. This trap message is generated when it failed to activate the port using the ADSL line configuration parameters. " ::= { hwadsl2AlarmTraps 0 13 } hwAdsl2ChipsetNotAvailableAlarmTrap NOTIFICATION-TYPE OBJECTS { hwFrameIndex, hwSlotIndex, hwadsl2ChipsetID } STATUS current DESCRIPTION "Chipset not available trap. This trap message is generated when the ADSL chipset is not available. " ::= { hwadsl2AlarmTraps 0 14 } END