-- =================================================================== -- Copyright (C) 2022 by HUAWEI TECHNOLOGIES. All rights reserved. -- Description: This MIB contains private managed object and notification -- trap definitions for MPLS LDP. -- Reference: -- Version: V3.08 -- =================================================================== HUAWEI-MPLSLDP-MIB DEFINITIONS ::= BEGIN IMPORTS hwDatacomm FROM HUAWEI-MIB InterfaceIndex FROM IF-MIB InterfaceIndexOrZero FROM IF-MIB InetAddress FROM INET-ADDRESS-MIB EnabledStatus FROM P-BRIDGE-MIB MplsLdpIdentifier, MplsLsrIdentifier FROM MPLS-TC-STD-MIB OBJECT-GROUP, MODULE-COMPLIANCE, NOTIFICATION-GROUP FROM SNMPv2-CONF DisplayString, RowStatus FROM SNMPv2-TC TimeTicks, Integer32, Unsigned32, IpAddress, Counter32, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE FROM SNMPv2-SMI; hwMplsLdp MODULE-IDENTITY LAST-UPDATED "202206062000Z" -- June 6, 2022 at 20:00:00 GMT ORGANIZATION "Huawei Technologies Co.,Ltd." CONTACT-INFO "Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China Website: http://www.huawei.com Email: support@huawei.com " DESCRIPTION "This MIB contains private managed object and notification trap definitions for MPLS LDP." -- -- Revision history -- REVISION "202206062000Z" DESCRIPTION "V3.08, modify hwLdpLastLocalAdjDownEntry index" REVISION "202205262000Z" DESCRIPTION "V3.07, modify hwMplsLdpLastLocalAdjDownClear" REVISION "202205262000Z" DESCRIPTION "V3.06, add hwMplsLdpLastLocalAdjDown and hwMplsLdpLastLocalAdjDownClear" REVISION "202202192000Z" DESCRIPTION "V3.05, add hwMplsLdpSessionDownReason object type." REVISION "202201202000Z" DESCRIPTION "V3.04, add hwMplsLdpSessionDownReason object type configICCP(32)." REVISION "202112162000Z" DESCRIPTION "V3.03, delete hwMplsLdpSessionDownReason object type configICCP(32)." REVISION "202112151638Z" DESCRIPTION "V3.02, modify description of hwLdpPeerMd5Type, hwLdpVpnPeerMd5Type." REVISION "202111112000Z" DESCRIPTION "V3.01, add hwMplsLdpSessionDownReason object type configICCP(32)." REVISION "202102182000Z" DESCRIPTION "V3.00, add and modify hwMplsLdpMappingCountExceed and hwMplsLdpMappingCountExceedClear." REVISION "202102042000Z" DESCRIPTION "V2.52, add hwMplsLdpPeerAddressCountExceed and hwMplsLdpPeerAddressCountExceedClear." REVISION "201908141800Z" DESCRIPTION "V2.51, add hwMplsLdpSessionDownReason object type rlfaIidDel(31)." REVISION "201810101810Z" DESCRIPTION "V2.50, modify description of hwLdpVpnTable,hwLdpRemoteEntityTable,hwLdpPeerTable,hwLdpInterfaceTable,hwMplsLdpSessionStateTable." REVISION "201809211810Z" DESCRIPTION "V2.49, modify description of hwMplsFrrLspTrigger,hwMplsVpnFrrLspTrigger,hwLdpPeerOutBoundPolicyRange,hwLdpPeerOutBoundPolicyBgpRange, hwLdpPeerInBoundPolicyRange,hwLdpVpnPeerMd5Type,hwLdpPeerGroupOutBoundRange,hwLdpPeerGroupOutBoundBgpRange,hwLdpPeerGroupInBoundRange, hwLdpOutBoundPolicyPeerAllRange,hwLdpOutBoundPolicyPeerAllBgpRange,hwLdpInBoundPolicyPeerAllRange,hwLdpLspDownReason." REVISION "201711231800Z" DESCRIPTION "V2.48, modify description of hwMplsLdpSessionTable." REVISION "201709211800Z" DESCRIPTION "V2.47, add hwMplsLdpMultiLinkCfgInconsistent and hwMplsLdpMultiLinkCfgInconsistentClear, and add table hwLdpMultiLinkCfgTable include objects belong to it." REVISION "201411061640Z" DESCRIPTION "V2.46, delete LDP GR timer range's validity check, include hwLdpGrNeighborLivenessTimer,hwLdpGrReconnectTimer,hwLdpGrRecoveryTimer." REVISION "201408221126Z" DESCRIPTION "V2.45, add hwMplsLdpSessionDownReason object type sessionProtectTimerExp(30)." REVISION "201405281126Z" DESCRIPTION "V2.44, add four nodes for LDP session statistics: hwLdpLocalOperationalSessionNumber, hwLdpRemoteOperationalSessionNumber, hwLdpLocalAndRemoteOperationalSessionNumber and hwLdpTotalOperationalSessionNumber." REVISION "201401151600Z" DESCRIPTION "V2.43, add hwMplsLdpSessionDownReason object type modifyMp2mp(29)." REVISION "201307151600Z" DESCRIPTION "V2.42, add hwMplsLdpSessionDownReason object type modifyP2mp(28)." REVISION "201306141000Z" DESCRIPTION "V2.41, add trap hwMplsLdpHostIngressLspDownClear, hwMplsLdpHostIngressLspDown, and the trap VB: hwLdpLspDownReason, hwLdpLspDownMplsLsrId, hwLdpLspDownOutIfIndex, hwLdpLspDownOutIfMainIp, hwLdpLspDownOutIfState, hwLdpLspDownDownstreamPeerLsrId." REVISION "201301151000Z" DESCRIPTION "V2.30, modify the name for these nodes:hwLdpPolicyPeerGroupOutBoundRange, hwLdpPolicyPeerGroupOutBoundFecIpPrefix, hwLdpPolicyPeerGroupOutBoundBgpRange, hwLdpPolicyPeerGroupOutBoundBgpIpPrefix, hwLdpPolicyPeerGroupInBoundRange, hwLdpPolicyPeerGroupInBoundIpPrefix, hwLdpPolicyPeerGroupRowStatus.correct name is :hwLdpPeerGroupOutBoundRange,hwLdpPeerGroupOutBoundFecIpPrefix, hwLdpPeerGroupOutBoundBgpRange, hwLdpPeerGroupOutBoundBgpIpPrefix, hwLdpPeerGroupInBoundRange, hwLdpPeerGroupInBoundIpPrefix, hwLdpPeerGroupRowStatus." REVISION "201301071000Z" DESCRIPTION "V2.20, add two nodes hwLdpRemoteLocalLsrIdIfIndex and hwLdpInterfaceLocalLsrIdIfIndex." REVISION "201207141000Z" DESCRIPTION "V2.10, set the length of hwLdpPeerGroupName." REVISION "201111161000Z" DESCRIPTION "V2.02, delete the default value in the description for these nodes: hwLdpGrReconnectTimer, hwLdpGrRecoveryTimer, hwLdpGrNeighborLivenessTimer." REVISION "201109281000Z" DESCRIPTION "V2.01, modify the description for these nodes: hwMplsLdpSessionTable, hwMplsLdpSessionEntry, hwMplsLdpSessionStateTable, hwMplsLdpSessionStateEntry, hwMplsLspTriggerIpPrefix, hwMplsLspTriggerBgpRouteIpPrefix, hwLdpDeleteGtsmAll, hwMplsFrrLspTriggerIpPrefix, hwLdpVpnTable, hwLdpVpnEntry, hwMplsVpnFrrLspTriggerIpPrefix, hwLdpRemoteEntityTable, hwLdpRemoteEntityEntry, hwLdpPeerTable. change the SYNTAX from DisplayString to OCTET STRING for these nodes: hwLdpPropagateIpPrefix, hwMplsLspTriggerIpPrefix, hwMplsLspTriggerBgpRouteIpPrefix, hwMplsFrrLspTriggerIpPrefix, hwMplsVpnFrrLspTriggerIpPrefix." REVISION "201109071000Z" DESCRIPTION "V2.00, modify the description for these nodes, hwMplsLspTriggerIpPrefix, hwMplsLspTrigger, hwMplsFrrLspTriggerIpPrefix, hwMplsFrrLspTrigger, hwLdpOutBoundPolicyPeerAllFecIpPrefix, hwLdpOutBoundPolicyPeerAllRange, hwLdpInBoundPolicyPeerAllIpPrefix, hwLdpInBoundPolicyPeerAllRange, hwLdpOutBoundPolicyPeerAllBgpIpPrefix, hwLdpOutBoundPolicyPeerAllBgpRange, hwMplsVpnFrrLspTrigger, hwMplsVpnFrrLspTriggerIpPrefix, hwLdpPeerOutBoundPolicyRange, hwLdpPeerOutBoundPolicyFecIpPrefix, hwLdpPeerOutBoundPolicyBgpRange, hwLdpPeerOutBoundPolicyBgpIpPrefix, hwLdpPeerOutBoundPolicyFecRange, hwLdpPeerInBoundPolicyFecIpPrefix, hwLdpPeerGroupOutBoundRange, hwLdpPeerGroupOutBoundFecIpPrefix, hwLdpPeerGroupOutBoundBgpRange, hwLdpPeerGroupOutBoundBgpIpPrefix, hwLdpPeerGroupInBoundRange, hwLdpPeerGroupInBoundIpPrefix." REVISION "201105101000Z" DESCRIPTION "V1.03, add four nodes for MPLS LDP Graceful-Delete, hwLdpVpnGracefulDeleteCapability, hwLdpVpnGracefulDeleteTimer, hwLdpGracefulDeleteCapability, hwLdpGracefulDeleteTimer." REVISION "201008111600Z" DESCRIPTION "V1.02, some description is modified." REVISION "201007121600Z" DESCRIPTION "V1.01, some nodes support the set operation." REVISION "200903101600Z" DESCRIPTION "V1.00, initial version." ::= { hwDatacomm 143 } -- -- Node definitions -- hwMplsLdpInfo OBJECT IDENTIFIER ::= { hwMplsLdp 1 } hwMplsLdpProcessName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the process name of LDP running on the router. By default, the value is LDP." ::= { hwMplsLdpInfo 1 } hwMplsLdpLspFec OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object indicates the destination address of an LSP. The value is either a destination IP address or a prefix of an IP address." ::= { hwMplsLdpInfo 2 } hwMplsLdpLspInLabel OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object indicates that labels are pushed into all the packets for direct MPLS forwarding." ::= { hwMplsLdpInfo 3 } hwMplsLdpLspOutLabel OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object indicates that all the packets swap labels for MPLS forwarding." ::= { hwMplsLdpInfo 4 } hwMplsLdpLspOutIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of this object identifies the index of the outgoing interface of the LSP." ::= { hwMplsLdpInfo 5 } hwMplsLdpLspDownReason OBJECT-TYPE SYNTAX INTEGER { routeDelete(1), lspmNotify(2), canNotRecoveryFromGr(3), recvReleaseMsg(4), recvWithdrawMsg(5), upStreamLost(6), downStreamLost(7), otherReason(8) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object indicates the cause that the LSP becomes Down. Options: 1. routeDelete(1) -indicates that a route has been deleted. 2. lspmNotify(2) -indicates that LSPM notify. 3. canNotRecoveryFromGr(3) -indicates that the recovery from GR was failed. 4. recvReleaseMsg(4) -indicates that the release message was received. 5. recvWithdrawMsg(5) -indicates that the withdraw message was received. 6. upStreamLost(6) -indicates that the upstream route was lost. 7. downStreamLost(7) -indicates that the downstream route was lost. 8. otherReason(8) -indicates that another cause was involved. " ::= { hwMplsLdpInfo 6 } --Mpls Ldp Session Table hwMplsLdpSessionTable OBJECT-TYPE SYNTAX SEQUENCE OF HwMplsLdpSessionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table describes LDP session parameters, including the index of an interface of a session, the cause for a session Down event, and time elapsed since a session was established." ::= { hwMplsLdpInfo 7 } hwMplsLdpSessionEntry OBJECT-TYPE SYNTAX HwMplsLdpSessionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object is used to display the session parameters and session age. The index of this entry is hwMplsLdpSessionPeerLsrId. " INDEX { hwMplsLdpSessionPeerLsrId } ::= { hwMplsLdpSessionTable 1 } HwMplsLdpSessionEntry ::= SEQUENCE { hwMplsLdpSessionPeerLsrId MplsLdpIdentifier, hwMplsLdpSessionIfIndex Integer32, hwMplsLdpSessionDownReason INTEGER, hwMplsLdpSessionAge TimeTicks } hwMplsLdpSessionPeerLsrId OBJECT-TYPE SYNTAX MplsLdpIdentifier MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the LSR ID of the peer in a session." ::= { hwMplsLdpSessionEntry 1 } hwMplsLdpSessionIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object indicates the index of the interface on which the session is established." ::= { hwMplsLdpSessionEntry 2 } hwMplsLdpSessionDownReason OBJECT-TYPE SYNTAX INTEGER { sessionUp(0), helloHoldTimerExp(1), ssnHoldTimerExp(2), resetMplsLdp(3), undoMplsLdp(4), undoMpls(5), undoMplsLdpRemotePeer(6), modifyGRConfig(7), modifyGRTimer(8), modifyKeepaliveTimer(9), modifyMD5Config(10), ssnRoleSwitch(11), modifyMTUConfig(12), modifyTransportAddress(13), modifyLDPLsrID(14), recvNotification(15), transportAddressNotMatch(16), protocolGR(17), ifStatusChanged(18), tcpDown(19), otherReason(20), sentNotification(21), canntBuildSessionRelation(22), receiveErrorMessageFromPeer(23), receiveSocketError(24), sessionDelete(25), modifyCapabilityAnnouncementConfig(26), modifyLocalLsrID(27), modifyP2MP(28), modifyMP2MP(29), sessionProtectTimerExp(30), rlfaIidDel(31), excessiveMessagesReceived(32), configICCP(33), packetSendReceiveError(34), socketSetOptError(35), receiveSocketClose(36) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object indicates the cause that the session becomes Down. Options: 1. sessionUp(0) -indicates that the session was Up. 2. helloHoldTimerExp(1) -indicates that the Hello hold timer expired. 3. ssnHoldTimerExp(2) -indicates that the session hold timer expired. 4. resetMplsLdp(3) -indicates MPLS LDP was reset. 5. undoMplsLdp(4) -indicates that MPLS LDP was disabled. 6. undoMpls(5) -indicates that MPLS was disabled. 7. undoMplsLdpRemotePeer(6) -indicates that the remote peer was deleted. 8. modifyGRConfig(7) -indicates that GR capability was modified. 9. modifyGRTimer(8) -indicates that the GR timer was modified. 10. modifyKeepaliveTimer(9) -indicates that the keepalive timer was modified. 11. modifyMD5Config(10) -indicates that MD5 was configured. 12. ssnRoleSwitch(11) -indicates that the session role was switched. 13. modifyMTUConfig(12) -indicates that the MTU was modified. 14. modifyTransportAddress(13) -indicates that the transport address was modified. 15. modifyLDPLsrID(14) -indicates that the LDP LSR ID was modified. 16. recvNotification(15) -indicates that the notification message was received. 17. transportAddressNotMatch(16) -indicates that the transport address was not matched. 18. protocolGR(17) -indicates that the protocol GR was in processing. 19. ifStatusChanged(18) -indicates that the interface status was changed. 20. tcpDown(19) -indicates that TCP was Down. 21. otherReason(20) -indicates that another cause was involved. 22. sentNotification(21) -indicates that the notification was sent. 23. canntBuildSessionRelation(22) -indicates that the session relation cannot be built. 24. receiveErrorMessageFromPeer(23) -indicates that error message from peer was received. 25. receiveSocketError(24) -indicates that error pakcet from socket was received. 26. sessionDelete(25) -indicates that the session was deleted. 27. modifyCapabilityAnnouncementConfig(26) -indicates that the capability-announcement was modified. 28. modifyLocalLsrID(27) -indicates that the Local LSR ID was modified. 29. modifyP2MP(28) -indicates that the mLDP P2MP was modified. 30. modifyMP2MP(29) -indicates that the mLDP MP2MP was modified. 31. sessionProtectTimerExp(30) -indicates that the session protection timer expired. 32. rlfaIidDel(31) -indicates that IGP deleted the RLFA IID. 33. excessiveMessagesReceived(32) -indicates Excessive messages were received. 34. configICCP(33) -indicates that the ICCP was configured. 35. packetSendReceiveError(34) -indicates that LDP cannot send or receive packets successfully. 36. socketSetOptError(35) -indicates that LDP cannot set the socket option successfully. 37. receiveSocketClose(36) -indicates that LDP received a socket close message. " ::= { hwMplsLdpSessionEntry 3 } hwMplsLdpSessionAge OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the duration since the session is set up." ::= { hwMplsLdpSessionEntry 4 } --Mpls Ldp Session State Table hwMplsLdpSessionStateTable OBJECT-TYPE SYNTAX SEQUENCE OF HwMplsLdpSessionStateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object is used to display the detailed state parameters of the session." ::= { hwMplsLdpInfo 8 } hwMplsLdpSessionStateEntry OBJECT-TYPE SYNTAX HwMplsLdpSessionStateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object is used to display the detailed state parameters of the session. The index of this entry is hwMplsLdpSessionPeerId. " INDEX { hwMplsLdpSessionPeerId } ::= { hwMplsLdpSessionStateTable 1 } HwMplsLdpSessionStateEntry ::= SEQUENCE { hwMplsLdpSessionPeerId MplsLdpIdentifier, hwMplsLdpSessionLsrId MplsLdpIdentifier, hwMplsLdpSessionTcpConnectionState OCTET STRING, hwMplsLdpSessionState OCTET STRING, hwMplsLdpSessionRole OCTET STRING, hwMplsLdpSessionFtFlag OCTET STRING, hwMplsLdpSessionMd5Flag OCTET STRING, hwMplsLdpSessionReconnectTimer Unsigned32, hwMplsLdpSessionRecoveryTimer Unsigned32, hwMplsLdpSessionKeepAliveTimer Unsigned32, hwMplsLdpSessionKeepAliveMsgReceived Unsigned32, hwMplsLdpSessionKeepAliveMsgSent Unsigned32, hwMplsLdpSessionLabelAdvMode OCTET STRING, hwMplsLdpSessionLocalLabelResourceStatus OCTET STRING, hwMplsLdpSessionPeerLabelResourceStatus OCTET STRING, hwMplsLdpSessionAgeStatus TimeTicks } hwMplsLdpSessionPeerId OBJECT-TYPE SYNTAX MplsLdpIdentifier MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the LSR ID of the LDP peer to which the session is connected." ::= { hwMplsLdpSessionStateEntry 1 } hwMplsLdpSessionLsrId OBJECT-TYPE SYNTAX MplsLdpIdentifier MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the ID of the local LSR." ::= { hwMplsLdpSessionStateEntry 2 } hwMplsLdpSessionTcpConnectionState OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the TCP link status of the session." ::= { hwMplsLdpSessionStateEntry 3 } hwMplsLdpSessionState OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the current status of the session." ::= { hwMplsLdpSessionStateEntry 4 } hwMplsLdpSessionRole OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the session roles." ::= { hwMplsLdpSessionStateEntry 5 } hwMplsLdpSessionFtFlag OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates whether the FT of the session is enabled." ::= { hwMplsLdpSessionStateEntry 6 } hwMplsLdpSessionMd5Flag OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates whether the MD5 is enabled for the peer." ::= { hwMplsLdpSessionStateEntry 7 } hwMplsLdpSessionReconnectTimer OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the value of the GR reconnection timer after the negotiation. Unit: seconds " ::= { hwMplsLdpSessionStateEntry 8 } hwMplsLdpSessionRecoveryTimer OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the value of the GR recovery timer after the negotiation. Unit: seconds " ::= { hwMplsLdpSessionStateEntry 9 } hwMplsLdpSessionKeepAliveTimer OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the value of the KeepAlive timer after the negotiation. Unit: seconds " ::= { hwMplsLdpSessionStateEntry 10 } hwMplsLdpSessionKeepAliveMsgReceived OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of the KeepAlive messages that the session obtains." ::= { hwMplsLdpSessionStateEntry 11 } hwMplsLdpSessionKeepAliveMsgSent OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of the KeepAlive messages that the session sends." ::= { hwMplsLdpSessionStateEntry 12 } hwMplsLdpSessionLabelAdvMode OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the label distribution mode of the session." ::= { hwMplsLdpSessionStateEntry 13 } hwMplsLdpSessionLocalLabelResourceStatus OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the status of the local label resources of the session." ::= { hwMplsLdpSessionStateEntry 14 } hwMplsLdpSessionPeerLabelResourceStatus OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the status of the label resources of the LDP peer." ::= { hwMplsLdpSessionStateEntry 15 } hwMplsLdpSessionAgeStatus OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the existence time of the session." ::= { hwMplsLdpSessionStateEntry 16 } hwLdpCapabilityConfig OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the global configuration or deletion of the LDP capability. Before enabling LDP capability, ensure that the MPLS capability is enabled globally." ::= { hwMplsLdpInfo 9 } hwLdpLsrId OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the way to change the LDP LSR ID. The default LDP LSR ID has the same value as the MPLS LSR ID. It is recommended not to change the LDP LSR ID unless necessary." ::= { hwMplsLdpInfo 10 } hwLdpPropagateIpPrefix OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the configuration or deletion of the transit policy for the LDP. The object has a valid length ranging from 1 to 169 characters. The length 0 characters shows that the transit policy is deleted." ::= { hwMplsLdpInfo 11 } hwLdpGlobalRemotePwe3 OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the configuration or deletion of the policy for the LDP remote session. When the object is enabled, it is forbidden to send mapping message to the remote peer. By default, the policy is disabled, which means that there is no limitation to send mapping message to the remote peer." ::= { hwMplsLdpInfo 12 } hwLdpMtuSignaling OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the configuration or deletion of the MTU signaling function. By default, the MTU signaling function is enabled, and the MTU TLV type in the LDP message is 0x900. " ::= { hwMplsLdpInfo 13 } hwLdpMtuApplyTlv OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This object conflicts with the object hwLdpMtuSignaling. If the object is enabled, it indicates that the MTU TLV type in the LDP message is 0x601 according to the RFC 3988." ::= { hwMplsLdpInfo 14 } hwLdpGrCapabilityConfig OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the configuration or deletion of the LDP GR capability." ::= { hwMplsLdpInfo 15 } hwLdpGrNeighborLivenessTimer OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the way to configure the value of GR neighbor life timer. When the status of hwLdpGrCapabilityConfig is enabled, the default value returned by the object is valid. Unit: seconds " ::= { hwMplsLdpInfo 16 } hwLdpGrReconnectTimer OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the way to configure the value of GR reconnect timer. When the status of hwLdpGrCapabilityConfig is enabled, the default value returned by the object is valid. Unit: seconds " ::= { hwMplsLdpInfo 17 } hwLdpGrRecoveryTimer OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the way to configure the value of GR recovery timer. When the status of hwLdpGrCapabilityConfig is enabled, the default value returned by the object is valid. Unit: seconds " ::= { hwMplsLdpInfo 18 } hwMplsLspTrigger OBJECT-TYPE SYNTAX INTEGER { all(1), none(2), host(3), ipprefix(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the way to configure the LDP policy for the ingress LSP and egress LSP. Options: 1. all(1) -indicates that all FECs are triggered for the IGP. 2. none(2) -indicates that no FEC is triggered for the IGP. 3. host(3) -indicates that the host FEC is triggered for the IGP. 4. ipprefix(4) -indicates that the ip-prefix list is triggered for the IGP. If the object is set as ipprefix, the value of hwMplsLspTriggerIpPrefix must be set together. Default: host " ::= { hwMplsLdpInfo 19 } hwMplsLspTriggerIpPrefix OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the IP prefix when configuring the LDP policy for the ingress LSP and egress LSP. The object has a valid length ranging from 1 to 169 characters. If the object is set with a value, the value of hwMplsLspTrigger must be set as ipprefix." ::= { hwMplsLdpInfo 20 } hwMplsLspTriggerBgpRoute OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the policy of triggering the BGP route to create the LDP LSP. Default: disabled " ::= { hwMplsLdpInfo 21 } hwMplsLspTriggerBgpRouteIpPrefix OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the IP prefix when triggering the BGP route to create the LDP LSP. The object has a valid length ranging from 1 to 169 characters. " ::= { hwMplsLdpInfo 22 } hwLdpReset OBJECT-TYPE SYNTAX INTEGER { reset(1), resetall(2), ready(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the reset of the LDP protocol. Options: 1. reset(1) -indicates the reset of the LDP protocol. 2. resetall(2) -indicates the reset of all LDP instances. 3. ready(3) -indicates that it is ready to reset LDP. This value cannot be set. " ::= { hwMplsLdpInfo 23 } hwLdpOutBoundSplitHorizonAll OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the way to set the flag of global split horizon. Default: disabled " ::= { hwMplsLdpInfo 24 } hwLdpDeleteGtsmAll OBJECT-TYPE SYNTAX INTEGER { delete(1), ready(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the deletion of the global GTSM configurations. Options: 1. delete(1) -indicates that global GTSM configurations are to be deleted. 2. ready(2) -indicates that it is ready to delete global GTSM configurations. " ::= { hwMplsLdpInfo 25 } hwMplsFrrLspTrigger OBJECT-TYPE SYNTAX INTEGER { all(1), none(2), host(3), ipPrefix(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the way to configure the LDP policy of global instance for LDP Auto FRR. If the object is set as ipprefix, the value of hwMplsFrrLspTriggerIpPrefix must be set together. Default: host Options: 1. all(1) -indicates that all FECs are triggered for the IGP. 2. none(2) -indicates that no FEC is triggered for the IGP. 3. host(3) -indicates that the host FEC is triggered for the IGP. 4. ipprefix(4) -indicates that the ip-prefix list is triggered for the IGP. " ::= { hwMplsLdpInfo 26 } hwMplsFrrLspTriggerIpPrefix OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the IP prefix when configuring LDP Auto FRR for the public network instance. The object has a valid length ranging from 1 to 169 characters. If the object is set with a value, the value of hwMplsFrrLspTrigger must be set as ipprefix." ::= { hwMplsLdpInfo 27 } hwLdpBackOffTimerInit OBJECT-TYPE SYNTAX Integer32 (5..2147483) MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the initial value of backoff timer. Default: 15 Unit: seconds " ::= { hwMplsLdpInfo 28 } hwLdpBackOffTimerMax OBJECT-TYPE SYNTAX Integer32 (5..2147483) MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the maximum value of backoff timer. Default: 120 Unit: seconds " ::= { hwMplsLdpInfo 29 } hwLdpLongestMatch OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates that the LDP is enabled with the function of searching for routes according to the longest match rule to establish LSPs. Default: disabled " ::= { hwMplsLdpInfo 30 } hwLdpRemotePeerAutoDodRequest OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this object identifies whether the remote peer is globally enabled with the capability of automatically sending a DoD request." ::= { hwMplsLdpInfo 37 } hwLdpCapabilityAnnouncementConfig OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this object identifies whether LDP has Capability-Announcement ability." ::= { hwMplsLdpInfo 38 } -- Ldp Vpn Table hwLdpVpnTable OBJECT-TYPE SYNTAX SEQUENCE OF HwLdpVpnEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object is used to configure or delete the LDP multi-instance. Make sure the relevant VPN instance is already created. " ::= { hwMplsLdpInfo 50 } hwLdpVpnEntry OBJECT-TYPE SYNTAX HwLdpVpnEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object is used to configure or delete the LDP multi-instance. The index of this entry is hwLdpVpnInstanceId. Make sure the relevant VPN instance is already created. " INDEX { hwLdpVpnInstanceId } ::= { hwLdpVpnTable 1 } HwLdpVpnEntry ::= SEQUENCE { hwLdpVpnInstanceId Unsigned32, hwLdpVpnLsrId IpAddress, hwLdpVpnSplitHorizonAll EnabledStatus, hwLdpVpnReset INTEGER, hwMplsVpnFrrLspTrigger INTEGER, hwMplsVpnFrrLspTriggerIpPrefix OCTET STRING, hwLdpVpnGracefulDeleteCapability EnabledStatus, hwLdpVpnGracefulDeleteTimer Integer32, hwLdpVpnRowStatus RowStatus } hwLdpVpnInstanceId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the ID of the VPN instance. You can find the correct VPN instance ID based on hwL3vpnVrfIndex of hwL3vpnStatisticsTable." ::= { hwLdpVpnEntry 1 } hwLdpVpnLsrId OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the way to configure the LDP LSR ID. If the value of the LDP LSR ID is the same as the value of the MPLS LSR ID, the LDP LSR ID is deleted. It is recommended not to change the LDP LSR ID unless necessary." ::= { hwLdpVpnEntry 11 } hwLdpVpnSplitHorizonAll OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the way to set the flag of split horizon for all LDP VPN peers. Default: disabled " DEFVAL{ disabled } ::= { hwLdpVpnEntry 12 } hwLdpVpnReset OBJECT-TYPE SYNTAX INTEGER { reset(1), ready(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the reset of the LDP multi-instance corresponding to the VPN. Options: 1.reset(1) -indicates that the LDP multi-instance will be reset. 2.ready(2) -indicates that it is ready to reset ldp multi-instance. This value cannot be set. " ::= { hwLdpVpnEntry 13 } hwMplsVpnFrrLspTrigger OBJECT-TYPE SYNTAX INTEGER { all(1), none(2), host(3), ipPrefix(4) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the way to configure the LDP policy of vpn instance for LDP Auto FRR. If the object is set as ipprefix, the value of hwMplsVpnFrrLspTriggerIpPrefix must be set together. Options: 1. all(1) -indicates that all FECs are triggered for the IGP. 2. none(2) -indicates that no FEC is triggered for the IGP. 3. host(3) -indicates that the host FEC is triggered for the IGP. 4. ipprefix(4) -indicates that the ip-prefix list is triggered for the IGP. " ::= { hwLdpVpnEntry 14 } hwMplsVpnFrrLspTriggerIpPrefix OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the IP prefix when configuring the LDP policy of vpn instance for LDP Auto FRR. The object has a valid length ranging from 1 to 169 characters. If the object is set with a value, the value of hwMplsVpnFrrLspTrigger must be set as ipprefix." ::= { hwLdpVpnEntry 15 } hwLdpVpnGracefulDeleteCapability OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates whether the LDP graceful-delete capability is enabled for a VPN instance." ::= { hwLdpVpnEntry 16 } hwLdpVpnGracefulDeleteTimer OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of this object identifies the value of a graceful-delete timer for a VPN instance. When the status of hwLdpVpnGracefulDeleteCapability is enabled, the default value returned by the object is valid. Default: 5 Unit: seconds " ::= { hwLdpVpnEntry 17 } hwLdpVpnRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates whether one entry of hwLdpVpnTable is created or destroyed. The value of this object can be CreatAndGo or Destroy. When the value of the object is set as CreatAndGo, and the entry is correctly created, the status of the object will change into active." ::= { hwLdpVpnEntry 51 } -- Ldp Remote Entity Table hwLdpRemoteEntityTable OBJECT-TYPE SYNTAX SEQUENCE OF HwLdpRemoteEntityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object is used to configure or delete the LDP remote peer." ::= { hwMplsLdpInfo 51 } hwLdpRemoteEntityEntry OBJECT-TYPE SYNTAX HwLdpRemoteEntityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object is used to configure or delete the LDP remote peer. The index of this entry is hwLdpRemoteName. " INDEX { hwLdpRemoteName } ::= { hwLdpRemoteEntityTable 1 } HwLdpRemoteEntityEntry ::= SEQUENCE { hwLdpRemoteName DisplayString, hwLdpRemoteIp IpAddress, hwLdpRemotePwe3 EnabledStatus, hwLdpRemoteKeepaliveTimer Integer32, hwLdpRemoteHelloTimer Integer32, hwLdpRemoteKeepaliveSendTimer Integer32, hwLdpRemoteHelloSendTimer Integer32, hwLdpRemoteIgpSyncTimer Integer32, hwLdpRemoteIpAutoDoDRequest EnabledStatus, hwLdpRemoteIpAutoDoDRequestBlock EnabledStatus, hwLdpRemoteLabelAdvertisementMode INTEGER, hwLdpRemoteLocalLsrIdIfIndex InterfaceIndexOrZero, hwLdpRemoteRowStatus RowStatus } hwLdpRemoteName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the name of the LDP remote peer. Range: 1-32 characters " ::= { hwLdpRemoteEntityEntry 1 } hwLdpRemoteIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the configuration of the remote peer LSR ID. If being set, the ID cannot be modified. To modify the ID, delete the original ID and create a new one. If the ID is set as 0.0.0.0, it indicates that the ID is deleted." ::= { hwLdpRemoteEntityEntry 11 } hwLdpRemotePwe3 OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the configuration or deletion of the policy for the remote LDP session. When the object is enabled, it is forbidden to send the mapping message to the remote peer. Default: disabled " DEFVAL { disabled } ::= { hwLdpRemoteEntityEntry 12 } hwLdpRemoteKeepaliveTimer OBJECT-TYPE SYNTAX Integer32 (30..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the value of LDP Keepalive timer. Default: 45 Unit: seconds " ::= { hwLdpRemoteEntityEntry 13 } hwLdpRemoteHelloTimer OBJECT-TYPE SYNTAX Integer32 (3..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the value of LDP Hello hold timer. Default: 45 Unit: seconds " ::= { hwLdpRemoteEntityEntry 14 } hwLdpRemoteKeepaliveSendTimer OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the value of LDP Keepalive send timer. By default, the value of the timer is 0, configuration does not take effect. Default: 0 Unit: seconds " ::= { hwLdpRemoteEntityEntry 15 } hwLdpRemoteHelloSendTimer OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the value of LDP Hello send timer. By default, the value of the timer is 0, configuration does not take effect. Default: 0 Unit: seconds " ::= { hwLdpRemoteEntityEntry 16 } hwLdpRemoteIgpSyncTimer OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the value of IGP-Sync timer. Default: 10 Unit: seconds " ::= { hwLdpRemoteEntityEntry 17 } hwLdpRemoteIpAutoDoDRequest OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies whether the remote peer is enabled with the capability of automatically sending a DoD request. Default: disabled " DEFVAL { disabled } ::= { hwLdpRemoteEntityEntry 18 } hwLdpRemoteIpAutoDoDRequestBlock OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates whether the remote ip auto dod request function blocked. Default: disabled " ::= { hwLdpRemoteEntityEntry 19 } hwLdpRemoteLabelAdvertisementMode OBJECT-TYPE SYNTAX INTEGER { dod(1), du(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the label distribution mode. Options: 1. dod(1) -indicates that the label distribution mode is dod. 2. du(2) -indicates that the label distribution mode is du. Default: du " ::= { hwLdpRemoteEntityEntry 20 } hwLdpRemoteLocalLsrIdIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the way to specify the interface that the local LDP LSR-ID based on remote entity is assigned to. Value: 0..2147483647 The default value of the object is the interface that the global LDP LSR ID is assigned to. If the global LDP LSR ID is not assigned to any interface, then the value of the object is 0. If set 0, the value of the object will be the default value. " ::= { hwLdpRemoteEntityEntry 21 } hwLdpRemoteRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates whether one entry of hwLdpRemoteEntityTable is created or destroyed. The value of this object can be CreatAndGo or Destroy. When the value of the object is set as CreatAndGo, and the entry is correctly created, the status of the object will change into active." ::= { hwLdpRemoteEntityEntry 51 } -- Ldp Peer Table hwLdpPeerTable OBJECT-TYPE SYNTAX SEQUENCE OF HwLdpPeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object is used to configure the LDP peer." ::= { hwMplsLdpInfo 52 } hwLdpPeerEntry OBJECT-TYPE SYNTAX HwLdpPeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of the peer feature table, used to configure and display features, such as the MD5 password and split horizon policy negotiated with the local peer. The index of this entry is hwLdpPeerLsrId. " INDEX { hwLdpPeerLsrId } ::= { hwLdpPeerTable 1 } HwLdpPeerEntry ::= SEQUENCE { hwLdpPeerLsrId IpAddress, hwLdpPeerMd5Type INTEGER, hwLdpPeerMd5Password OCTET STRING, hwLdpPeerGtsmHops Integer32, hwLdpPeerSplitHorizon EnabledStatus, hwLdpPeerReset INTEGER, hwLdpPeerKeychainName OCTET STRING, hwLdpPeerOutBoundPolicyRange INTEGER, hwLdpPeerOutBoundPolicyFecIpPrefix OCTET STRING, hwLdpPeerOutBoundPolicyBgpRange INTEGER, hwLdpPeerOutBoundPolicyBgpIpPrefix OCTET STRING, hwLdpPeerInBoundPolicyRange INTEGER, hwLdpPeerInBoundPolicyFecIpPrefix OCTET STRING, hwLdpPeerRowStatus RowStatus } hwLdpPeerLsrId OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the LSR ID of the LDP peer." ::= { hwLdpPeerEntry 1 } hwLdpPeerMd5Type OBJECT-TYPE SYNTAX INTEGER { cipher(1), plain(2), null(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the Md5 type. MD5 is an insecure algorithm and is not recommended. Options: 1. cipher(1) -indicates that the MD5 password is in cipher text mode. 2. plain(2) -indicates that the MD5 password is in plain text mode. 3. null(3) -indicates that the MD5 type is null, which means that the MD5 authentication is not configured for the LDP peer. " ::= { hwLdpPeerEntry 11 } hwLdpPeerMd5Password OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the MD5 password of LDP neighbor. To delete the password, set the password length as zero. When read, it always returns an Octet string with the length of zero. " ::= { hwLdpPeerEntry 12 } hwLdpPeerGtsmHops OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the number of GTSM hops. The valid number of GTSM hops ranges from 1 to 255. To clear the configuration of GTSM hops, set the number of GTSM hops as 0." ::= { hwLdpPeerEntry 13 } hwLdpPeerSplitHorizon OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the way to set the flag of split horizon for the specified LDP peer. Default: disabled " DEFVAL { disabled } ::= { hwLdpPeerEntry 14 } hwLdpPeerReset OBJECT-TYPE SYNTAX INTEGER { reset(1), ready(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the reset of the neighbor services. Options: 1. reset(1) -indicates that the neighbor services will be reset. Only when the object is ready, can this value take effect. 2. ready(2) -indicates that it is ready to reset the neighbor services. This value cannot be set. " ::= { hwLdpPeerEntry 15 } hwLdpPeerKeychainName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the Keychain name. To cancel the Keychain authentication, set the Keychain name length as 0." ::= { hwLdpPeerEntry 18 } hwLdpPeerOutBoundPolicyRange OBJECT-TYPE SYNTAX INTEGER { clear(1), none(2), ipprefix(3), host(4) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the range of IGP routes for an outbound policy. The default value is clear. If the object is set as ipprefix, the value of hwLdpPeerOutBoundPolicyFecIpPrefix must be set together. Options: 1. clear(1) -This policy is disabled by default. 2. none(2) -The policy filters out all FECs. 3. ipprefix(3) -The policy allows FECs only in a specified IP prefix to pass through. 4. host(4) -The policy allows FECs only of host routes to pass through. " ::= { hwLdpPeerEntry 19 } hwLdpPeerOutBoundPolicyFecIpPrefix OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the IP prefix list name of IGP routes for an outbound policy. If the object is set with a value, the value of hwLdpPeerOutBoundPolicyRange must be set as ipprefix." ::= { hwLdpPeerEntry 20 } hwLdpPeerOutBoundPolicyBgpRange OBJECT-TYPE SYNTAX INTEGER { clear(1), none(2), ipprefix(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the range of BGP routes for an outbound policy. The default value is clear. If the object is set as ipprefix, the value of hwLdpPeerOutBoundPolicyBgpIpPrefix must be set together. Options: 1. clear(1) -This policy is disabled by default. 2. none(2) -The policy filters out all FECs. 3. ipprefix(3) -The policy allows FECs only in a specified IP prefix to pass through. " ::= { hwLdpPeerEntry 21 } hwLdpPeerOutBoundPolicyBgpIpPrefix OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the IP prefix list name of BGP routes for the outbound policy. If the object is set with a value, the value of hwLdpPeerOutBoundPolicyBgpRange must be set as ipprefix." ::= { hwLdpPeerEntry 22 } hwLdpPeerInBoundPolicyRange OBJECT-TYPE SYNTAX INTEGER { clear(1), none(2), ipprefix(3), host(4) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the route range for the inbound policy. The default value is clear. If the object is set as ipprefix, the value of hwLdpPeerInBoundPolicyFecIpPrefix must be set together. Options: 1. clear(1) -This policy is disabled by default. 2. none(2) -The policy filters out all FECs. 3. ipprefix(3) -The policy allows FECs only in a specified IP prefix to pass through. 4. host(4) -The policy allows FECs only of host routes to pass through. " ::= { hwLdpPeerEntry 23 } hwLdpPeerInBoundPolicyFecIpPrefix OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the IP prefix list name for the inbound policy. If the object is set with a value, the value of hwLdpPeerInBoundPolicyRange must be set as ipprefix." ::= { hwLdpPeerEntry 24 } hwLdpPeerRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates whether one entry of hwLdpPeerTable is created or destroyed. The value of this object can be CreatAndGo or Destroy. When the value of the object is set as CreatAndGo, and the entry is correctly created, the status of the object will change into active." ::= { hwLdpPeerEntry 51 } -- Ldp Vpn Peer Table hwLdpVpnPeerTable OBJECT-TYPE SYNTAX SEQUENCE OF HwLdpVpnPeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to create and delete peer configurations in the LDP multi-instance. Make sure the corresponding LDP VPN-instance is already created in hwLdpVpnTable. " ::= { hwMplsLdpInfo 53 } hwLdpVpnPeerEntry OBJECT-TYPE SYNTAX HwLdpVpnPeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of the VPN peer feature table, used to configure and display features, such as the MD5 password and split horizon policy negotiated with the local peer on the VPN. The indexs of this entry are hwLdpVpnInstanceId, hwLdpVpnPeerLsrId. Make sure the corresponding LDP VPN-instance is already created in hwLdpVpnTable. " INDEX { hwLdpVpnInstanceId, hwLdpVpnPeerLsrId } ::= { hwLdpVpnPeerTable 1 } HwLdpVpnPeerEntry ::= SEQUENCE { hwLdpVpnPeerLsrId IpAddress, hwLdpVpnPeerMd5Type INTEGER, hwLdpVpnPeerMd5Password OCTET STRING, hwLdpVpnPeerSplitHorizon EnabledStatus, hwLdpVpnPeerReset INTEGER, hwLdpVpnPeerKeychainName OCTET STRING, hwLdpVpnPeerRowStatus RowStatus } hwLdpVpnPeerLsrId OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the LSR ID of the LDP peer." ::= { hwLdpVpnPeerEntry 1 } hwLdpVpnPeerMd5Type OBJECT-TYPE SYNTAX INTEGER { cipher(1), plain(2), null(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the Md5 type. MD5 is an insecure algorithm and is not recommended. Options: 1. cipher(1) -indicates that the MD5 password is in cipher text mode. 2. plain(2) -indicates that the MD5 password is in plain text mode. 3. null(3) -indicates that the MD5 type is null, which means that the MD5 authentication is not configured for the LDP peer. " ::= { hwLdpVpnPeerEntry 11 } hwLdpVpnPeerMd5Password OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the MD5 password of VPN LDP neighbor. To delete the password, set the password length as zero. When read, it always returns an Octet string with the length of zero. " ::= { hwLdpVpnPeerEntry 12 } hwLdpVpnPeerSplitHorizon OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the way to set the flag of split horizon for the specified LDP peer. Default: disabled " DEFVAL { disabled } ::= { hwLdpVpnPeerEntry 13 } hwLdpVpnPeerReset OBJECT-TYPE SYNTAX INTEGER { reset(1), ready(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the reset of the neighbor services. Options: 1. reset(1) -indicates that the neighbor services will be reset. Only when the object is ready, can this value take effect. 2. ready(2) -indicates that it is ready to reset the neighbor services. This value cannot be set. " ::= { hwLdpVpnPeerEntry 14 } hwLdpVpnPeerKeychainName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the Keychain name. To cancel the Keychain authentication, set the Keychain name length as 0." ::= { hwLdpVpnPeerEntry 17 } hwLdpVpnPeerRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates whether one entry of hwLdpVpnPeerTable is created or destroyed. The value of this object can be CreatAndGo or Destroy. When the value of the object is set as CreatAndGo, and the entry is correctly created, the status of the object will change into active." ::= { hwLdpVpnPeerEntry 51 } -- Ldp Interface Table hwLdpInterfaceTable OBJECT-TYPE SYNTAX SEQUENCE OF HwLdpInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to configure or delete the LDP capability on the interface." ::= { hwMplsLdpInfo 54 } hwLdpInterfaceEntry OBJECT-TYPE SYNTAX HwLdpInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of the LDP interface table, used to configure and display the LDP negotiation parameters on the interface enabled with LDP capabilities. The index of this entry is hwLdpInterfaceIndex. " INDEX { hwLdpInterfaceIndex } ::= { hwLdpInterfaceTable 1 } HwLdpInterfaceEntry ::= SEQUENCE { hwLdpInterfaceIndex InterfaceIndex, hwLdpStaticFrrProtectTimer Integer32, hwLdpKeepAliveTimer Integer32, hwLdpIgpSyncTimer Integer32, hwLdpHelloTimer Integer32, hwLdpTransportAddressIfIndex InterfaceIndexOrZero, hwLdpKeepAliveSendTimer Integer32, hwLdpHelloSendTimer Integer32, hwLdpInterfaceLabelAdvertisementMode INTEGER, hwLdpInterfaceLocalLsrIdIfIndex InterfaceIndexOrZero, hwLdpInterfaceRowStatus RowStatus } hwLdpInterfaceIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the interface index. You can get the correct interface index based on ifIndex of ifTable." ::= { hwLdpInterfaceEntry 1 } hwLdpStaticFrrProtectTimer OBJECT-TYPE SYNTAX Integer32 (5..30) MAX-ACCESS read-create STATUS obsolete DESCRIPTION "This object indicates the value of static FRR protect timer. Default: 10 Unit: seconds " DEFVAL { 10 } ::= { hwLdpInterfaceEntry 11 } hwLdpKeepAliveTimer OBJECT-TYPE SYNTAX Integer32 (30..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the value of Keepalive timer. Default: 45 Unit: seconds " ::= { hwLdpInterfaceEntry 12 } hwLdpIgpSyncTimer OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the value of IGP-Sync timer. By default, the timer is set to 10 seconds. Default: 10 Unit: seconds " ::= { hwLdpInterfaceEntry 13 } hwLdpHelloTimer OBJECT-TYPE SYNTAX Integer32 (3..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the value of Hello hold timer. By default, the value of the timer is 15 seconds. Default: 15 Unit: seconds " ::= { hwLdpInterfaceEntry 14 } hwLdpTransportAddressIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the way to specify the interface that the Transport Address is assigned to. Value: 0..2147483647 The default value of the object for the public interface is the interface that the LDP LSR ID is assigned to. If the LDP LSR ID is not assigned to any interface, then the value of the object is 0, and 0 cannot be set. The default value of the object for the private interface is the private interface itself. Based on mplsL3VpnIfConfRowStatus of mplsL3VpnIfConfTable, you can find which interface belongs to the VPN. The interface must be bound with the same VPN instance. " ::= { hwLdpInterfaceEntry 15 } hwLdpKeepAliveSendTimer OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the value of LDP Keepalive send timer. Default: 0 Unit: seconds " ::= { hwLdpInterfaceEntry 16 } hwLdpHelloSendTimer OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the value of LDP Hello send timer. Default: 0 Unit: seconds " ::= { hwLdpInterfaceEntry 17 } hwLdpInterfaceLabelAdvertisementMode OBJECT-TYPE SYNTAX INTEGER { dod(1), du(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the label distribution mode. Options: 1. dod(1) -indicates that the label distribution mode is dod. 2. du(2) -indicates that the label distribution mode is du. Default: du " ::= { hwLdpInterfaceEntry 18 } hwLdpInterfaceLocalLsrIdIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the way to specify the interface that the local LDP LSR-ID based on interface is assigned to. Value: 0..2147483647 The default value of the object for the public interface is the interface that the global LDP LSR ID is assigned to. If the global LDP LSR ID is not assigned to any interface, then the value of the object is 0. If set 0, the value of the object will be the default value. The default value of the object for the private interface is the interface that the global LDP LSR ID of VPN Instance is assigned to. Based on mplsL3VpnIfConfRowStatus of mplsL3VpnIfConfTable, you can find which interface belongs to the VPN. The interface which the object specified must be bound with the same VPN instance with the interface which is configured. " ::= { hwLdpInterfaceEntry 19 } hwLdpInterfaceRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates whether one entry of hwLdpInterfaceTable is created or destroyed. The value of this object can be CreatAndGo or Destroy. When the value of the object is set as CreatAndGo, and the entry is correctly created, the status of the object will change into active." ::= { hwLdpInterfaceEntry 51 } -- Ldp PeerGroup Table -- 1.3.6.1.4.1.2011.5.25.143.1.58 hwLdpPeerGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF HwLdpPeerGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to configure an LDP peer group. " ::= { hwMplsLdpInfo 58 } hwLdpPeerGroupEntry OBJECT-TYPE SYNTAX HwLdpPeerGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of this table." INDEX { hwLdpPeerGroupName } ::= { hwLdpPeerGroupTable 1 } HwLdpPeerGroupEntry ::= SEQUENCE { hwLdpPeerGroupName OCTET STRING, hwLdpPeerGroupOutBoundRange INTEGER, hwLdpPeerGroupOutBoundFecIpPrefix OCTET STRING, hwLdpPeerGroupOutBoundBgpRange INTEGER, hwLdpPeerGroupOutBoundBgpIpPrefix OCTET STRING, hwLdpPeerGroupInBoundRange INTEGER, hwLdpPeerGroupInBoundIpPrefix OCTET STRING, hwLdpPeerGroupRowStatus RowStatus } hwLdpPeerGroupName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..110)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the name of a peer group." ::= { hwLdpPeerGroupEntry 1 } hwLdpPeerGroupOutBoundRange OBJECT-TYPE SYNTAX INTEGER { clear(1), none(2), ipprefix(3), host(4) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the range of IGP routes for an outbound policy. The default value is clear. If the object is set as ipprefix, the value of hwLdpPeerGroupOutBoundFecIpPrefix must be set together. Options: 1. clear(1) -This policy is disabled by default. 2. none(2) -The policy filters out all FECs. 3. ipprefix(3) -The policy allows FECs only in a specified IP prefix to pass through. 4. host(4) -The policy allows FECs only of host routes to pass through. " ::= { hwLdpPeerGroupEntry 11 } hwLdpPeerGroupOutBoundFecIpPrefix OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the IP prefix list name of IGP routes for an outbound policy. If the object is set with a value, the value of hwLdpPeerGroupOutBoundRange must be set as ipprefix." ::= { hwLdpPeerGroupEntry 12 } hwLdpPeerGroupOutBoundBgpRange OBJECT-TYPE SYNTAX INTEGER { clear(1), none(2), ipprefix(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the range of BGP routes for an outbound policy. The default value is clear. If the object is set as ipprefix, the value of hwLdpPeerGroupOutBoundBgpIpPrefix must be set together. Options: 1. clear(1) -This policy is disabled by default. 2. none(2) -The policy filters out all FECs. 3. ipprefix(3) -The policy allows FECs only in a specified IP prefix to pass through. " ::= { hwLdpPeerGroupEntry 13 } hwLdpPeerGroupOutBoundBgpIpPrefix OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the IP prefix list name of BGP routes for an outbound policy. If the object is set with a value, the value of hwLdpPeerGroupOutBoundBgpRange must be set as ipprefix." ::= { hwLdpPeerGroupEntry 14 } hwLdpPeerGroupInBoundRange OBJECT-TYPE SYNTAX INTEGER { clear(1), none(2), ipprefix(3), host(4) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the route range for an inbound policy. The default value is clear. If the object is set as ipprefix, the value of hwLdpPeerGroupInBoundIpPrefix must be set together. Options: 1. clear(1) -This policy is disabled by default. 2. none(2) -The policy filters out all FECs. 3. ipprefix(3) -The policy allows FECs only in a specified IP prefix to pass through. 4. host(4) -The policy allows FECs only of host routes to pass through. " ::= { hwLdpPeerGroupEntry 15 } hwLdpPeerGroupInBoundIpPrefix OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the IP prefix list name of routes for an inbound policy. If the object is set with a value, the value of hwLdpPeerGroupInBoundRange must be set as ipprefix." ::= { hwLdpPeerGroupEntry 16 } hwLdpPeerGroupRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates whether one entry of hwLdpPolicyPeerGroupTable is created or destroyed. The value of this object is CreatAndGo or Destroy. When the value of the object is set to CreatAndGo, and the entry is correctly created, the status of the object will change into active." ::= { hwLdpPeerGroupEntry 51 } -- 1.3.6.1.4.1.2011.5.25.143.1.59 hwLdpOutBoundPolicyPeerAllRange OBJECT-TYPE SYNTAX INTEGER { all(1), none(2), ipprefix(3), host(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the range of IGP routes for a global outbound LDP policy. The default value is all. If the object is set as ipprefix, the value of hwLdpOutBoundPolicyPeerAllFecIpPrefix must be set together. Options: 1. all(1) -The default policy allows all LDP peers. 2. none(2) -The policy filters out all FECs. 3. ipprefix(3) -The policy allows FECs only in a specified IP prefix to pass through. 4. host(4) -The policy allows FECs only of host routes to pass through. " ::= { hwMplsLdpInfo 59 } -- 1.3.6.1.4.1.2011.5.25.143.1.60 hwLdpOutBoundPolicyPeerAllFecIpPrefix OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the IP prefix list name of IGP routes for a global outbound LDP policy. The default value is NULL. If the object is set with a value, the value of hwLdpOutBoundPolicyPeerAllRange must be set as ipprefix." ::= { hwMplsLdpInfo 60 } -- 1.3.6.1.4.1.2011.5.25.143.1.61 hwLdpOutBoundPolicyPeerAllBgpRange OBJECT-TYPE SYNTAX INTEGER { all(1), none(2), ipprefix(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the range of BGP routes for a global outbound LDP policy. The default value is all. If the object is set as ipprefix, the value of hwLdpOutBoundPolicyPeerAllBgpIpPrefix must be set together. Options: 1. all(1) -The default policy allows all LDP peers. 2. none(2) -The policy filters out all FECs. 3. ipprefix(3) -The policy allows FECs only in a specified IP prefix to pass through. " ::= { hwMplsLdpInfo 61 } -- 1.3.6.1.4.1.2011.5.25.143.1.62 hwLdpOutBoundPolicyPeerAllBgpIpPrefix OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the IP prefix list name of BGP routes for a global outbound LDP policy. The default value is NULL. If the object is set with a value, the value of hwLdpOutBoundPolicyPeerAllBgpRange must be set as ipprefix." ::= { hwMplsLdpInfo 62 } -- 1.3.6.1.4.1.2011.5.25.143.1.63 hwLdpInBoundPolicyPeerAllRange OBJECT-TYPE SYNTAX INTEGER { all(1), none(2), ipprefix(3), host(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the range of routes for a global inbound LDP policy. The default value is all. If the object is set as ipprefix, the value of hwLdpInBoundPolicyPeerAllIpPrefix must be set together. Options: 1. all(1) -The default policy allows all LDP peers. 2. none(2) -The policy filters out all FECs. 3. ipprefix(3) -The policy allows FECs only in a specified IP prefix to pass through. 4. host(4) -The policy allows FECs only of host routes to pass through. " ::= { hwMplsLdpInfo 63 } -- 1.3.6.1.4.1.2011.5.25.143.1.64 hwLdpInBoundPolicyPeerAllIpPrefix OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the IP prefix list name of routes for a global inbound LDP policy. The default value is NULL. If the object is set with a value, the value of hwLdpInBoundPolicyPeerAllRange must be set as ipprefix." ::= { hwMplsLdpInfo 64 } -- 1.3.6.1.4.1.2011.5.25.143.1.65 hwLdpGracefulDeleteCapability OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates whether the LDP graceful-delete capability is enabled." ::= { hwMplsLdpInfo 65 } -- 1.3.6.1.4.1.2011.5.25.143.1.66 hwLdpGracefulDeleteTimer OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this object identifies the value of a graceful-delete timer. When the status of hwLdpGracefulDeleteCapability is enabled, the default value returned by the object is valid. Default: 5 Unit: seconds " ::= { hwMplsLdpInfo 66 } -- Ldp Lsp down reason hwLdpLspDownReason OBJECT-TYPE SYNTAX INTEGER { other(1), sessionDown(2), routeChange(3), canNotRecoveryFromGr(4), policyChange(5) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The LDP LSP down reason. Options: 1. other(1) -indicates other reasons. 2. session down(2) -indicates the ldp session went down. 3. route change(3) -indicates the route changed. 4. cannot recovery from GR(4) -indicates LSP cannot recovery from graceful-restart. 5. policy change(5) -indicates the policy changed. " ::= { hwMplsLdpInfo 67 } hwLdpLspDownMplsLsrId OBJECT-TYPE SYNTAX MplsLsrIdentifier MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object indicates the LSR ID of failed router." ::= { hwMplsLdpInfo 68 } hwLdpLspDownOutIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object indicates the outgoing interface index of the failed router." ::= { hwMplsLdpInfo 69 } hwLdpLspDownOutIfMainIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object indicates the main ip address of the failed router's outgoing interface." ::= { hwMplsLdpInfo 70 } hwLdpLspDownOutIfState OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The state of the failed router's outgoing interface. Options: 1. up(1) -indicates that the state of the outgoing interface is Up. 2. down(2) -indicates that the state of the outgoing interface is Down. " ::= { hwMplsLdpInfo 71 } hwLdpLspDownDownstreamPeerLsrId OBJECT-TYPE SYNTAX MplsLdpIdentifier MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object indicates the failed router's downstream peer's LSR ID." ::= { hwMplsLdpInfo 72 } hwLdpSessionStatistics OBJECT IDENTIFIER ::= { hwMplsLdpInfo 73 } hwLdpLocalOperationalSessionNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of local LDP operational sessions." ::= { hwLdpSessionStatistics 1 } hwLdpRemoteOperationalSessionNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of remote LDP operational sessions." ::= { hwLdpSessionStatistics 2 } hwLdpLocalAndRemoteOperationalSessionNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of local and remote LDP operational sessions." ::= { hwLdpSessionStatistics 3 } hwLdpTotalOperationalSessionNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the total number of LDP operational sessions." ::= { hwLdpSessionStatistics 4 } hwLdpMultiLinkCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF HwLdpMultiLinkCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates that MPLS LDP multi-link (include local and remote coexist) configurations are inconsistent. The index of this entry is hwMplsLdpVrfIndex,hwMplsLdpPeerLdpId,hwMplsLdpLocalLdpId,hwMplsLdpConfigIfIndex, hwMplsLdpConfigRemotePeerIP and hwMplsLdpConfigType. " ::= { hwMplsLdpInfo 74 } hwLdpMultiLinkCfgEntry OBJECT-TYPE SYNTAX HwLdpMultiLinkCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates that MPLS LDP multi-link (include local and remote coexist) configurations are inconsistent. The index of this entry is hwMplsLdpVrfIndex,hwMplsLdpPeerLdpId,hwMplsLdpLocalLdpId,hwMplsLdpConfigIfIndex, hwMplsLdpConfigRemotePeerIP and hwMplsLdpConfigType. " INDEX { hwMplsLdpVrfIndex, hwMplsLdpPeerLdpId, hwMplsLdpLocalLdpId, hwMplsLdpConfigIfIndex, hwMplsLdpConfigRemotePeerIP, hwMplsLdpConfigType } ::= { hwLdpMultiLinkCfgTable 1 } HwLdpMultiLinkCfgEntry ::= SEQUENCE { hwMplsLdpVrfIndex Integer32, hwMplsLdpPeerLdpId MplsLdpIdentifier, hwMplsLdpLocalLdpId MplsLdpIdentifier, hwMplsLdpConfigIfIndex Integer32, hwMplsLdpConfigRemotePeerIP InetAddress, hwMplsLdpConfigType OCTET STRING, hwMplsLdpConsistentState INTEGER, hwMplsLdpEffectKeepAlive Integer32, hwMplsLdpEffectTransportAddr InetAddress, hwMplsLdpEffectLabelAdvertisementMode OCTET STRING } hwMplsLdpVrfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the vrfIndex." ::= { hwLdpMultiLinkCfgEntry 1 } hwMplsLdpPeerLdpId OBJECT-TYPE SYNTAX MplsLdpIdentifier MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the peer LDP ID." ::= { hwLdpMultiLinkCfgEntry 2 } hwMplsLdpLocalLdpId OBJECT-TYPE SYNTAX MplsLdpIdentifier MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the local LDP ID." ::= { hwLdpMultiLinkCfgEntry 3 } hwMplsLdpConfigIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the inconsistent interface." ::= { hwLdpMultiLinkCfgEntry 4} hwMplsLdpConfigRemotePeerIP OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the rempte ip. Range: 1-32 characters" ::= { hwLdpMultiLinkCfgEntry 5} hwMplsLdpConfigType OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the inconsistent configuration type." ::= { hwLdpMultiLinkCfgEntry 6 } hwMplsLdpConsistentState OBJECT-TYPE SYNTAX INTEGER { consistent(1), inconsistent(2) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object indicates the the state is inconsistent or consistent." ::= { hwLdpMultiLinkCfgEntry 7 } hwMplsLdpEffectKeepAlive OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object indicates the value of effect keepalive time." ::= { hwLdpMultiLinkCfgEntry 8 } hwMplsLdpEffectTransportAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object indicates the value of effect transport address." ::= { hwLdpMultiLinkCfgEntry 9 } hwMplsLdpEffectLabelAdvertisementMode OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object indicates the value of effect label advertisement mode." ::= { hwLdpMultiLinkCfgEntry 10} hwLdpPeerAddressTable OBJECT-TYPE SYNTAX SEQUENCE OF HwLdpPeerAddressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates that peer address count has exceeded the total count. The index of this entry is hwLdpPeerAddressLsrId and hwLdpPeerVrfIndex. " ::= { hwMplsLdpInfo 75 } hwLdpPeerAddressEntry OBJECT-TYPE SYNTAX HwLdpPeerAddressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates that peer address count has exceeded the total count. The index of this entry is hwLdpPeerAddressLsrId and hwLdpPeerVrfIndex. " INDEX { hwLdpPeerAddressLsrId, hwLdpPeerVrfIndex } ::= { hwLdpPeerAddressTable 1 } HwLdpPeerAddressEntry ::= SEQUENCE { hwLdpPeerAddressLsrId MplsLdpIdentifier, hwLdpPeerVrfIndex Integer32, hwLdpAddressTotalCount Integer32 } hwLdpPeerAddressLsrId OBJECT-TYPE SYNTAX MplsLdpIdentifier MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object indicates peer LSR ID." ::= { hwLdpPeerAddressEntry 1 } hwLdpPeerVrfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object indicates the vrfIndex." ::= { hwLdpPeerAddressEntry 2 } hwLdpAddressTotalCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of this object identifies the maximum number of peer address." ::= { hwLdpPeerAddressEntry 3 } hwLdpMappingTable OBJECT-TYPE SYNTAX SEQUENCE OF HwLdpMappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates that mapping count has exceeded the total count. The index of this entry is hwLdpMappingType and hwLdpVrfIndex. " ::= { hwMplsLdpInfo 76 } hwLdpMappingEntry OBJECT-TYPE SYNTAX HwLdpMappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates that mapping count has exceeded the total count. The index of this entry is hwLdpMappingType and hwLdpVrfIndex. " INDEX { hwLdpMappingType, hwLdpVrfIndex } ::= { hwLdpMappingTable 1 } HwLdpMappingEntry ::= SEQUENCE { hwLdpMappingType OCTET STRING, hwLdpVrfIndex Integer32, hwLdpMappingTotalCount Integer32 } hwLdpMappingType OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "sent -Indicates that the sent mapping. received -Indicates that the received mapping. " ::= { hwLdpMappingEntry 1 } hwLdpVrfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object indicates the vrfIndex." ::= { hwLdpMappingEntry 2 } hwLdpMappingTotalCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of this object identifies the maximum number of mapping count." ::= { hwLdpMappingEntry 3 } hwLdpLastLocalAdjDownTable OBJECT-TYPE SYNTAX SEQUENCE OF HwLdpLastLocalAdjDownEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates that the last local adjacency in the local-and-remote LDP session went Down due to hello timeout. The index of this entry is hwLdpVrfName, hwLdpAdjPeerLsrId. " ::= { hwMplsLdpInfo 77 } hwLdpLastLocalAdjDownEntry OBJECT-TYPE SYNTAX HwLdpLastLocalAdjDownEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates that the last local adjacency in the local-and-remote LDP session went Down due to hello timeout. The index of this entry is hwLdpVrfName, hwLdpAdjPeerLsrId. " INDEX { hwLdpVrfName, hwLdpAdjPeerLsrId } ::= { hwLdpLastLocalAdjDownTable 1 } HwLdpLastLocalAdjDownEntry ::= SEQUENCE { hwLdpVrfName OCTET STRING, hwLdpAdjPeerLsrId MplsLdpIdentifier, hwLdpInterfaceName OCTET STRING } hwLdpVrfName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object indicates the VRF name." ::= { hwLdpLastLocalAdjDownEntry 1 } hwLdpAdjPeerLsrId OBJECT-TYPE SYNTAX MplsLdpIdentifier MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object indicates the LSR ID of the LDP peer." ::= { hwLdpLastLocalAdjDownEntry 2 } hwLdpInterfaceName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object indicates the interface name." ::= { hwLdpLastLocalAdjDownEntry 3 } hwMplsLdpTrap OBJECT IDENTIFIER ::= { hwMplsLdp 2 } hwMplsLdpSessionDown NOTIFICATION-TYPE OBJECTS { hwMplsLdpSessionDownReason, hwMplsLdpSessionIfIndex } STATUS obsolete DESCRIPTION "When the trap indicating that a session is down is sent, the cause for the down LDP session is displayed. " ::= { hwMplsLdpTrap 1 } hwMplsLdpLspDown NOTIFICATION-TYPE OBJECTS { hwMplsLdpLspFec, hwMplsLdpLspInLabel, hwMplsLdpLspOutLabel, hwMplsLdpLspOutIfIndex, hwMplsLdpLspDownReason } STATUS obsolete DESCRIPTION "When the trap indicating that a session is down is sent, the cause for the down LSP session is displayed." ::= { hwMplsLdpTrap 2 } hwMplsLdpHostIngressLspDownClear NOTIFICATION-TYPE OBJECTS { hwMplsLdpLspFec } STATUS current DESCRIPTION "A trap is sent to clear the down trap of a specified FEC's ingress lsp." ::= { hwMplsLdpTrap 3 } hwMplsLdpHostIngressLspDown NOTIFICATION-TYPE OBJECTS { hwMplsLdpLspFec, hwLdpLspDownReason, hwLdpLspDownMplsLsrId, hwLdpLspDownOutIfIndex, hwLdpLspDownOutIfMainIp, hwLdpLspDownOutIfState, hwLdpLspDownDownstreamPeerLsrId } STATUS current DESCRIPTION "A trap is sent when all the ingress lsp of a specified FEC went down." ::= { hwMplsLdpTrap 4 } hwMplsLdpMultiLinkCfgInconsistent NOTIFICATION-TYPE OBJECTS { hwMplsLdpConsistentState, hwMplsLdpEffectKeepAlive, hwMplsLdpEffectTransportAddr, hwMplsLdpEffectLabelAdvertisementMode } STATUS current DESCRIPTION "Indicates that MPLS LDP multi-link configurations are Inconsistent." ::= { hwMplsLdpTrap 5 } hwMplsLdpMultiLinkCfgInconsistentClear NOTIFICATION-TYPE OBJECTS { hwMplsLdpConsistentState, hwMplsLdpEffectKeepAlive, hwMplsLdpEffectTransportAddr, hwMplsLdpEffectLabelAdvertisementMode } STATUS current DESCRIPTION "Indicates that MPLS LDP multi-link configurations are consistent." ::= { hwMplsLdpTrap 6 } hwMplsLdpPeerAddressCountExceed NOTIFICATION-TYPE OBJECTS { hwLdpPeerAddressLsrId, hwLdpPeerVrfIndex, hwLdpAddressTotalCount } STATUS current DESCRIPTION "Indicates that peer address count reaches the upper limit." ::= { hwMplsLdpTrap 7 } hwMplsLdpPeerAddressCountExceedClear NOTIFICATION-TYPE OBJECTS { hwLdpPeerAddressLsrId, hwLdpPeerVrfIndex } STATUS current DESCRIPTION "Indicates that peer address count falls from the upper limit." ::= { hwMplsLdpTrap 8 } hwMplsLdpMappingCountExceed NOTIFICATION-TYPE OBJECTS { hwLdpMappingType, hwLdpVrfIndex, hwLdpMappingTotalCount } STATUS current DESCRIPTION "Indicates that the number of LDP label mapping sent or received on the device exceeded the upper limit." ::= { hwMplsLdpTrap 9 } hwMplsLdpMappingCountExceedClear NOTIFICATION-TYPE OBJECTS { hwLdpMappingType, hwLdpVrfIndex } STATUS current DESCRIPTION "Indicates that the number of LDP label mapping sent or received on the device falls from the upper limit." ::= { hwMplsLdpTrap 10 } hwMplsLdpLastLocalAdjDown NOTIFICATION-TYPE OBJECTS { hwLdpVrfName, hwLdpAdjPeerLsrId, hwLdpInterfaceName } STATUS current DESCRIPTION "The last local adjacency in the local-and-remote LDP session went Down due to hello timeout." ::= { hwMplsLdpTrap 11 } hwMplsLdpLastLocalAdjDownClear NOTIFICATION-TYPE OBJECTS { hwLdpVrfName, hwLdpAdjPeerLsrId } STATUS current DESCRIPTION "A local adjacency is established, and the alarm is cleared." ::= { hwMplsLdpTrap 12 } hwMplsLdpConformance OBJECT IDENTIFIER ::= { hwMplsLdp 3 } hwMplsLdpCompliances MODULE-COMPLIANCE STATUS current DESCRIPTION "The Compliance statement for systems supporting the HUAWEI-MPLSLDP-MIB." MODULE -- this module MANDATORY-GROUPS { hwMplsLdpInfoGroup } ::= { hwMplsLdpConformance 1 } hwMplsLdpGroup OBJECT IDENTIFIER ::= { hwMplsLdpConformance 2 } hwMplsLdpInfoGroup OBJECT-GROUP OBJECTS { hwMplsLdpLspDownReason, hwMplsLdpLspFec, hwMplsLdpLspInLabel, hwMplsLdpLspOutLabel, hwMplsLdpSessionAge, hwMplsLdpSessionIfIndex, hwMplsLdpSessionAgeStatus, hwMplsLdpSessionPeerLabelResourceStatus, hwMplsLdpSessionLocalLabelResourceStatus, hwMplsLdpSessionLabelAdvMode, hwMplsLdpSessionKeepAliveMsgSent, hwMplsLdpSessionKeepAliveMsgReceived, hwMplsLdpSessionKeepAliveTimer, hwMplsLdpSessionRecoveryTimer, hwMplsLdpSessionReconnectTimer, hwMplsLdpSessionMd5Flag, hwMplsLdpSessionFtFlag, hwMplsLdpSessionRole, hwMplsLdpSessionState, hwMplsLdpSessionTcpConnectionState, hwMplsLdpSessionLsrId, hwLdpRemotePeerAutoDodRequest, hwLdpCapabilityAnnouncementConfig, hwMplsLdpSessionDownReason, hwMplsLdpProcessName, hwMplsLdpLspOutIfIndex, hwLdpOutBoundPolicyPeerAllRange, hwLdpOutBoundPolicyPeerAllFecIpPrefix, hwLdpOutBoundPolicyPeerAllBgpRange, hwLdpOutBoundPolicyPeerAllBgpIpPrefix, hwLdpInBoundPolicyPeerAllRange, hwLdpInBoundPolicyPeerAllIpPrefix, hwLdpGracefulDeleteCapability, hwLdpGracefulDeleteTimer, hwLdpLspDownReason, hwLdpLspDownMplsLsrId, hwLdpLspDownOutIfIndex, hwLdpLspDownOutIfMainIp, hwLdpLspDownOutIfState, hwLdpLspDownDownstreamPeerLsrId } STATUS current DESCRIPTION "Infomation about LDP LSP." ::= { hwMplsLdpGroup 1 } hwMplsLdpNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { hwMplsLdpSessionDown } STATUS obsolete DESCRIPTION "Notification information included in the mib." ::= { hwMplsLdpGroup 2 } hwMplsLdpLspDownNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { hwMplsLdpLspDown } STATUS obsolete DESCRIPTION "No use." ::= { hwMplsLdpGroup 3 } hwMplsLdpGlobalGroup OBJECT-GROUP OBJECTS { hwLdpCapabilityConfig, hwLdpLsrId, hwLdpPropagateIpPrefix, hwLdpGlobalRemotePwe3, hwLdpMtuSignaling, hwLdpMtuApplyTlv, hwLdpGrCapabilityConfig, hwLdpGrNeighborLivenessTimer, hwLdpGrReconnectTimer, hwLdpGrRecoveryTimer, hwMplsLspTrigger, hwMplsLspTriggerIpPrefix, hwMplsLspTriggerBgpRoute, hwMplsLspTriggerBgpRouteIpPrefix, hwLdpReset, hwLdpOutBoundSplitHorizonAll, hwLdpDeleteGtsmAll, hwMplsFrrLspTrigger, hwMplsFrrLspTriggerIpPrefix, hwLdpBackOffTimerInit, hwLdpBackOffTimerMax, hwLdpLongestMatch } STATUS current DESCRIPTION "Information about Ldp Global configuration." ::= { hwMplsLdpGroup 4 } hwMplsLdpVpnGlobalGroup OBJECT-GROUP OBJECTS { hwLdpVpnLsrId, hwLdpVpnSplitHorizonAll, hwLdpVpnReset, hwMplsVpnFrrLspTrigger, hwMplsVpnFrrLspTriggerIpPrefix, hwLdpVpnGracefulDeleteCapability, hwLdpVpnGracefulDeleteTimer, hwLdpVpnRowStatus } STATUS current DESCRIPTION "Information about Ldp Vpn configuration." ::= { hwMplsLdpGroup 5 } hwMplsLdpRemoteEntityGroup OBJECT-GROUP OBJECTS { hwLdpRemoteIp, hwLdpRemotePwe3, hwLdpRemoteKeepaliveTimer, hwLdpRemoteHelloTimer, hwLdpRemoteKeepaliveSendTimer, hwLdpRemoteHelloSendTimer, hwLdpRemoteIgpSyncTimer, hwLdpRemoteIpAutoDoDRequest, hwLdpRemoteIpAutoDoDRequestBlock, hwLdpRemoteLabelAdvertisementMode,hwLdpRemoteLocalLsrIdIfIndex, hwLdpRemoteRowStatus} STATUS current DESCRIPTION "Information about remote entity." ::= { hwMplsLdpGroup 6 } hwMplsLdpPeerGroup OBJECT-GROUP OBJECTS { hwLdpPeerMd5Type, hwLdpPeerMd5Password, hwLdpPeerGtsmHops, hwLdpPeerSplitHorizon, hwLdpPeerReset, hwLdpPeerKeychainName, hwLdpPeerOutBoundPolicyRange, hwLdpPeerOutBoundPolicyFecIpPrefix, hwLdpPeerOutBoundPolicyBgpRange, hwLdpPeerOutBoundPolicyBgpIpPrefix, hwLdpPeerInBoundPolicyRange, hwLdpPeerInBoundPolicyFecIpPrefix, hwLdpPeerRowStatus } STATUS current DESCRIPTION "Information about Ldp Peer." ::= { hwMplsLdpGroup 7 } hwMplsLdpVpnPeerGroup OBJECT-GROUP OBJECTS { hwLdpVpnPeerMd5Type, hwLdpVpnPeerMd5Password, hwLdpVpnPeerSplitHorizon, hwLdpVpnPeerReset, hwLdpVpnPeerKeychainName, hwLdpVpnPeerRowStatus } STATUS current DESCRIPTION "Information about Ldp Vpn Peer." ::= { hwMplsLdpGroup 8 } hwMplsLdpInterfaceGroup OBJECT-GROUP OBJECTS { hwLdpKeepAliveTimer, hwLdpIgpSyncTimer, hwLdpHelloTimer, hwLdpTransportAddressIfIndex, hwLdpKeepAliveSendTimer, hwLdpHelloSendTimer, hwLdpInterfaceLabelAdvertisementMode,hwLdpInterfaceLocalLsrIdIfIndex, hwLdpInterfaceRowStatus } STATUS current DESCRIPTION "Information about Ldp interface capability." ::= { hwMplsLdpGroup 9 } hwLdpLspDownReasonGroup OBJECT-GROUP OBJECTS { hwLdpLspDownReason, hwLdpLspDownMplsLsrId, hwLdpLspDownOutIfIndex, hwLdpLspDownOutIfMainIp, hwLdpLspDownOutIfState, hwLdpLspDownDownstreamPeerLsrId } STATUS current DESCRIPTION "Information about Ldp ingress Lsp down reason." ::= { hwMplsLdpGroup 10 } hwMplsLdpHostIngressLspDownNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { hwMplsLdpHostIngressLspDownClear, hwMplsLdpHostIngressLspDown } STATUS current DESCRIPTION "Notification information included in the mib." ::= { hwMplsLdpGroup 11 } hwLdpPolicyPeerGroupGroup OBJECT-GROUP OBJECTS { hwLdpPeerGroupOutBoundRange, hwLdpPeerGroupOutBoundFecIpPrefix, hwLdpPeerGroupOutBoundBgpRange, hwLdpPeerGroupOutBoundBgpIpPrefix, hwLdpPeerGroupInBoundRange, hwLdpPeerGroupInBoundIpPrefix, hwLdpPeerGroupRowStatus } STATUS current DESCRIPTION "Information about Ldp Policies of peer groups." ::= { hwMplsLdpGroup 15 } hwMplsLdpFrrProtectGroup OBJECT-GROUP OBJECTS { hwLdpStaticFrrProtectTimer } STATUS obsolete DESCRIPTION "Information about Ldp FRR protect timer." ::= { hwMplsLdpGroup 16 } hwMplsLdpSessionStatisticsGroup OBJECT-GROUP OBJECTS { hwLdpLocalOperationalSessionNumber, hwLdpRemoteOperationalSessionNumber, hwLdpLocalAndRemoteOperationalSessionNumber, hwLdpTotalOperationalSessionNumber } STATUS current DESCRIPTION "Information about Ldp Session Statistics." ::= { hwMplsLdpGroup 17} hwMplsLdpMultiLinkCfgGroup OBJECT-GROUP OBJECTS { hwMplsLdpConsistentState, hwMplsLdpEffectKeepAlive, hwMplsLdpEffectTransportAddr, hwMplsLdpEffectLabelAdvertisementMode } STATUS current DESCRIPTION "Information about MPLS LDP multi-link configurations." ::= { hwMplsLdpGroup 18} hwMplsLdpMultiLinkCfgNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { hwMplsLdpMultiLinkCfgInconsistent, hwMplsLdpMultiLinkCfgInconsistentClear} STATUS current DESCRIPTION "Information about MPLS LDP multi-link configurations." ::= { hwMplsLdpGroup 19 } hwMplsLdpPeerAddressGroup OBJECT-GROUP OBJECTS { hwLdpPeerAddressLsrId, hwLdpPeerVrfIndex, hwLdpAddressTotalCount} STATUS current DESCRIPTION "Information about MPLS LDP peer address." ::= { hwMplsLdpGroup 20 } hwMplsLdpPeerAddressTotalCountNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { hwMplsLdpPeerAddressCountExceed, hwMplsLdpPeerAddressCountExceedClear} STATUS current DESCRIPTION "Information about MPLS LDP peer address notification." ::= { hwMplsLdpGroup 21 } hwMplsLdpMappingCountGroup OBJECT-GROUP OBJECTS { hwLdpMappingType, hwLdpVrfIndex, hwLdpMappingTotalCount} STATUS current DESCRIPTION "Information about MPLS LDP mapping count." ::= { hwMplsLdpGroup 22 } hwMplsLdpMappingCountNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { hwMplsLdpMappingCountExceed, hwMplsLdpMappingCountExceedClear} STATUS current DESCRIPTION "Information about MPLS LDP mapping count notification." ::= { hwMplsLdpGroup 23 } hwMplsLdpLastLocalAdjDownGroup OBJECT-GROUP OBJECTS { hwLdpVrfName, hwLdpAdjPeerLsrId, hwLdpInterfaceName} STATUS current DESCRIPTION "Information about MPLS LDP last local adjacency." ::= { hwMplsLdpGroup 24 } hwMplsLdpLastLocalAdjDownNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { hwMplsLdpLastLocalAdjDown, hwMplsLdpLastLocalAdjDownClear} STATUS current DESCRIPTION "Information about MPLS LDP last local adjacency notification." ::= { hwMplsLdpGroup 25 } END -- -- HUAWEI-MPLSLDP-MIB.mib --