-- ================================================================== -- Copyright (C) 2010 by HUAWEI TECHNOLOGIES. All rights reserved. -- Description: This MIB is used for defining the HUAWEI private -- extended Multiprotocol Label Switching (MPLS) MIB -- object. All MIB objects are used to describe private -- managed objects and trap definitions for MPLS. -- Reference: -- Version: V1.00 -- ================================================================== -- ================================================================== -- -- Varibles and types be imported -- -- ================================================================== HUAWEI-MPLS-TP-MIB DEFINITIONS ::= BEGIN IMPORTS hwDatacomm FROM HUAWEI-MIB ifIndex, ifName FROM IF-MIB MplsTunnelIndex, MplsTunnelInstanceIndex, MplsExtendedTunnelId FROM MPLS-TC-STD-MIB SnmpAdminString FROM SNMP-FRAMEWORK-MIB OBJECT-GROUP, NOTIFICATION-GROUP, MODULE-COMPLIANCE FROM SNMPv2-CONF Integer32, Unsigned32, Counter32, BITS, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE FROM SNMPv2-SMI; -- 1.3.6.1.4.1.2011.5.25.305 hwMplsTpMib MODULE-IDENTITY LAST-UPDATED "201007131535Z" ORGANIZATION "Huawei Technologies Co.,Ltd." CONTACT-INFO "Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China Website: http://www.huawei.com Email: support@huawei.com " DESCRIPTION "This MIB is used for defining the HUAWEI private extended Transport Profile of Multiprotocol Label Switching (MPLS-TP) MIB object. All MIB objects are used to describe private managed objects and trap definitions for MPLS-TP." -- Revision history REVISION "201203201000Z" DESCRIPTION "V1.00,Initial LSPM IETFTP MIB" ::= { hwDatacomm 305 } -- -- Node definitions -- -- 1.3.6.1.4.1.2011.5.25.305.1 hwMplsTpObjects OBJECT IDENTIFIER ::= { hwMplsTpMib 1 } hwMplsTpTables OBJECT IDENTIFIER ::= { hwMplsTpObjects 1 } -- 1.3.6.1.4.1.2011.5.25.305.1.1 hwMplsTpTunnelTable OBJECT-TYPE SYNTAX SEQUENCE OF HwMplsTpTunnelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A tp-tunnel needs to be uniquely identified across an MPLS-TP network. Indexes hwMplsTpTunnelIngressIndex, hwMplsTpTunnelIngressLSRId, hwMplsTpIngressGlobalId, hwMplsTpTunnelEgressIndex, hwMplsTpTunnelEgressLSRId and hwMplsTpEgressGlobalId uniquely identifies a tunnel across an MPLS-TP network. The indexes of this table are hwMplsTpTunnelIngressIndex, hwMplsTpTunnelIngressLSRId, hwMplsTpIngressGlobalId, hwMplsTpTunnelEgressIndex, hwMplsTpTunnelEgressLSRId and hwMplsTpEgressGlobalId." ::= { hwMplsTpTables 1 } -- 1.3.6.1.4.1.2011.5.25.305.1.1.1.1 hwMplsTpTunnelEntry OBJECT-TYPE SYNTAX HwMplsTpTunnelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A tp-tunnel needs to be uniquely identified across an MPLS-TP network. Indexes hwMplsTpTunnelIngressIndex, hwMplsTpTunnelIngressLSRId, hwMplsTpIngressGlobalId, hwMplsTpTunnelEgressIndex, hwMplsTpTunnelEgressLSRId and hwMplsTpEgressGlobalId uniquely identifies a tunnel across an MPLS-TP network. The indexes of this entry are hwMplsTpTunnelIngressIndex, hwMplsTpTunnelIngressLSRId, hwMplsTpIngressGlobalId, hwMplsTpTunnelEgressIndex, hwMplsTpTunnelEgressLSRId and hwMplsTpEgressGlobalId." REFERENCE "1. RFC 2863 - The Interfaces Group MIB, McCloghrie, K., and F. Kastenholtz, June 2000 " INDEX { hwMplsTpTunnelIngressIndex, hwMplsTpTunnelIngressLSRId, hwMplsTpIngressGlobalId, hwMplsTpTunnelEgressIndex, hwMplsTpTunnelEgressLSRId, hwMplsTpEgressGlobalId } ::= { hwMplsTpTunnelTable 1 } HwMplsTpTunnelEntry ::= SEQUENCE { hwMplsTpTunnelIngressIndex MplsTunnelIndex, hwMplsTpTunnelIngressLSRId MplsExtendedTunnelId, hwMplsTpIngressGlobalId Integer32, hwMplsTpTunnelEgressIndex MplsTunnelIndex, hwMplsTpTunnelEgressLSRId MplsExtendedTunnelId, hwMplsTpEgressGlobalId Integer32, hwMplsTpTunnelIfName SnmpAdminString, hwMplsTpTunnelAdminStatus INTEGER, hwMplsTpTunnelOperStatus INTEGER } -- 1.3.6.1.4.1.2011.5.25.305.1.1.1.1.1 hwMplsTpTunnelIngressIndex OBJECT-TYPE SYNTAX MplsTunnelIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Identity of the ingress LSR associated with this tunnel instance. This value SHOULD be equal to the Tunnel Sender Address in the Sender Template object and MAY be equal to the Extended Tunnel Id field in the SESSION object." ::= { hwMplsTpTunnelEntry 1 } -- 1.3.6.1.4.1.2011.5.25.305.1.1.1.1.2 hwMplsTpTunnelIngressLSRId OBJECT-TYPE SYNTAX MplsExtendedTunnelId MAX-ACCESS not-accessible STATUS current DESCRIPTION "Identity of the ingress LSR associated with this tp-tunnel instance. " ::= { hwMplsTpTunnelEntry 2 } -- 1.3.6.1.4.1.2011.5.25.305.1.1.1.1.3 hwMplsTpIngressGlobalId OBJECT-TYPE SYNTAX Integer32(1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The GlobalId is defined to uniquely identify an Ingress LSR operator.This Value idefines a globally unique Attachment Interface Identifier (AII). That AII is composed of three parts: a Global_ID that uniquely identifies an operator, a prefix, and, finally, an attachment circuit identifier." ::= { hwMplsTpTunnelEntry 3 } -- 1.3.6.1.4.1.2011.5.25.305.1.1.1.1.4 hwMplsTpTunnelEgressIndex OBJECT-TYPE SYNTAX MplsTunnelIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Identity of the egress LSR associated with this tunnel instance." ::= { hwMplsTpTunnelEntry 4 } -- 1.3.6.1.4.1.2011.5.25.305.1.1.1.1.5 hwMplsTpTunnelEgressLSRId OBJECT-TYPE SYNTAX MplsExtendedTunnelId MAX-ACCESS not-accessible STATUS current DESCRIPTION "Identity of the egress LSR associated with this tunnel instance." ::= { hwMplsTpTunnelEntry 5 } -- 1.3.6.1.4.1.2011.5.25.305.1.1.1.1.6 hwMplsTpEgressGlobalId OBJECT-TYPE SYNTAX Integer32(1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The GlobalId is defined to uniquely identify an Ingress LSR operator.This Value idefines a globally unique Attachment Interface Identifier (AII). That AII is composed of three parts: a Global_ID that uniquely identifies an operator, a prefix, and, finally, an attachment circuit identifier." ::= { hwMplsTpTunnelEntry 6 } -- 1.3.6.1.4.1.2011.5.25.305.1.1.1.1.7 hwMplsTpTunnelIfName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the tp-tunnel interface name. The object is only valid at the ingress." ::= { hwMplsTpTunnelEntry 7 } -- 1.3.6.1.4.1.2011.5.25.305.1.1.1.1.8 hwMplsTpTunnelAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the management status of this tunnel.Reference to MPLS-TE-STD-MIB. Options: 1. up(1) -indicates the management status of this tunnel is up. 2. down(2) -indicates the management status of this tunnel is down. 3. testing(3) -indicates the tunnel is used in some test mode. " ::= { hwMplsTpTunnelEntry 8 } -- 1.3.6.1.4.1.2011.5.25.305.1.1.1.1.9 hwMplsTpTunnelOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3), unknown(4), dormant(5), notPresent(6), lowerLayerDown(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the actual operational status of this tunnel, which is but not limited to the status of this tunnel of a certain period.Reference to MPLS-TE-STD-MIB. Options: 1. up(1) -indicates that the operational status of this tunnel is up. 2. down(2) -indicates that the operational status of this tunnel is down. 3. testing(3) -indicates that the tunnel is used in some test mode. 4. unknown(4) -indicates the invalid value. 5. dormant(5) -indicates that the status can not be determined. 6. notPresent(6) -indicates that some component is missing 7. lowerLayerDown(7) -indicates the Down state due to the state of lower layer interfaces. " ::= { hwMplsTpTunnelEntry 9 } -- 1.3.6.1.4.1.2011.5.25.305.1.1.2 hwMplsTpLspTable OBJECT-TYPE SYNTAX SEQUENCE OF HwMplsTpLspEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of all TP lsps seen by a given sys-tem." ::= { hwMplsTpTables 2 } -- 1.3.6.1.4.1.2011.5.25.305.1.1.2.1 hwMplsTpLspEntry OBJECT-TYPE SYNTAX HwMplsTpLspEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in this table represents information on a single TP LSP which is represented by a session's index triple (hwMplsTpTunnelIngressInstance, hwMplsTpTunnelEgressInstance, hwMplsTpLspType)." REFERENCE "1. RFC 2863 - The Interfaces Group MIB, McCloghrie, K., and F. Kastenholtz, June 2000 " INDEX { hwMplsTpTunnelIngressIndex, hwMplsTpTunnelIngressInstance, hwMplsTpTunnelIngressLSRId, hwMplsTpIngressGlobalId, hwMplsTpTunnelEgressIndex, hwMplsTpTunnelEgressInstance, hwMplsTpTunnelEgressLSRId, hwMplsTpEgressGlobalId } ::= { hwMplsTpLspTable 1 } HwMplsTpLspEntry ::= SEQUENCE { hwMplsTpTunnelIngressInstance MplsTunnelInstanceIndex, hwMplsTpTunnelEgressInstance MplsTunnelInstanceIndex, hwMplsTpLspType INTEGER } -- 1.3.6.1.4.1.2011.5.25.305.1.1.2.1.1 hwMplsTpTunnelIngressInstance OBJECT-TYPE SYNTAX MplsTunnelInstanceIndex MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Uniquely identifies a particular instance of a tunnel between a pair of ingress and egress LSRs." ::= { hwMplsTpLspEntry 1 } -- 1.3.6.1.4.1.2011.5.25.305.1.1.2.1.2 hwMplsTpTunnelEgressInstance OBJECT-TYPE SYNTAX MplsTunnelInstanceIndex MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Uniquely identifies a particular instance of a tunnel between a pair of egress and ingress LSRs." ::= { hwMplsTpLspEntry 2 } -- 1.3.6.1.4.1.2011.5.25.305.1.1.2.1.3 hwMplsTpLspType OBJECT-TYPE SYNTAX INTEGER { protection(1), working(2) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The type of LSP connection. Options: 1. protection(1) -indicates that the lsp type of this tunnel is protection lsp. 2. working(2) -indicates that the lsp type of this tunnel is working lsp. " ::= { hwMplsTpLspEntry 3 } hwMplsTpGlobalObjects OBJECT IDENTIFIER ::= { hwMplsTpObjects 2 } -- 1.3.6.1.4.1.2011.5.25.305.2 hwMplsTpNotifications OBJECT IDENTIFIER ::= { hwMplsTpMib 2 } -- 1.3.6.1.4.1.2011.5.25.305.2.1 hwMplsTpTrapObjects OBJECT IDENTIFIER ::= { hwMplsTpNotifications 1 } -- 1.3.6.1.4.1.2011.5.25.305.2.2 hwMplsTpTunnelTrap OBJECT IDENTIFIER ::= { hwMplsTpNotifications 2 } hwMplsTpTunnelDownClear NOTIFICATION-TYPE OBJECTS { hwMplsTpTunnelIfName, hwMplsTpTunnelAdminStatus, hwMplsTpTunnelOperStatus, ifName } STATUS current DESCRIPTION "This notification is generated when a mplsTpTunnelOperStatus object for one of the configured tunnels is about to leave the down state and transition into some other state (but not into the notPresent state). This other state is indicated by the included value of mplsTpTunnelOperStatus." ::= { hwMplsTpTunnelTrap 1 } hwMplsTpTunnelDown NOTIFICATION-TYPE OBJECTS { hwMplsTpTunnelIfName, hwMplsTpTunnelAdminStatus, hwMplsTpTunnelOperStatus, ifName } STATUS current DESCRIPTION "This notification is generated when a mplsTpTunnelOperStatus object for one of the configured tunnels is about to enter the down state from some other state (but not from the notPresent state). This other state is indicated by the included value of mplsTpTunnelOperStatus." ::= { hwMplsTpTunnelTrap 2 } hwMplsTpTunnelResume NOTIFICATION-TYPE OBJECTS { hwMplsTpTunnelIfName } STATUS current DESCRIPTION "This object is used to indicate that data switching from protection Lsp to Working Lsp." ::= { hwMplsTpTunnelTrap 3 } hwMplsTpTunnelSwitch NOTIFICATION-TYPE OBJECTS { hwMplsTpTunnelIfName } STATUS current DESCRIPTION "This object is used to indicate that data switching from protection Lsp to Working Lsp." ::= { hwMplsTpTunnelTrap 4 } -- 1.3.6.1.4.1.2011.5.25.305.2.3 hwMplsTpLspTrap OBJECT IDENTIFIER ::= { hwMplsTpNotifications 3 } hwMplsTpLspOamDlocClear NOTIFICATION-TYPE OBJECTS { hwMplsTpTunnelIfName, hwMplsTpLspType, ifName } STATUS current DESCRIPTION " This object indicates that the link recovers from a connectivity fault." ::= { hwMplsTpLspTrap 1 } hwMplsTpLspOamDloc NOTIFICATION-TYPE OBJECTS { hwMplsTpTunnelIfName, hwMplsTpLspType, ifName } STATUS current DESCRIPTION " This object is used to indicates the connectivity fault of the link." ::= { hwMplsTpLspTrap 2 } hwMplsTpLspOamRdiClear NOTIFICATION-TYPE OBJECTS { hwMplsTpTunnelIfName, hwMplsTpLspType, ifName } STATUS current DESCRIPTION " This object indicates that the link recovers from a remote defect." ::= { hwMplsTpLspTrap 3 } hwMplsTpLspOamRdi NOTIFICATION-TYPE OBJECTS { hwMplsTpTunnelIfName, hwMplsTpLspType, ifName } STATUS current DESCRIPTION " This object is used to indicates the remote defect of the link." ::= { hwMplsTpLspTrap 4 } hwMplsTpLspOamMisconnectionEncapClear NOTIFICATION-TYPE OBJECTS { hwMplsTpTunnelIfName, hwMplsTpLspType } STATUS current DESCRIPTION "This object indicates that the link recovers from an misconnection encap defect." ::= { hwMplsTpLspTrap 5 } hwMplsTpLspOamMisconnectionEncap NOTIFICATION-TYPE OBJECTS { hwMplsTpTunnelIfName, hwMplsTpLspType } STATUS current DESCRIPTION "This object indicates that the link receivs from an misconnection encap defect." ::= { hwMplsTpLspTrap 6 } hwMplsTpLspOamMisconnectionDiscrClear NOTIFICATION-TYPE OBJECTS { hwMplsTpTunnelIfName, hwMplsTpLspType } STATUS current DESCRIPTION "This object indicates that the link recovers from an misconnection discription defect." ::= { hwMplsTpLspTrap 7 } hwMplsTpLspOamMisconnectionDiscr NOTIFICATION-TYPE OBJECTS { hwMplsTpTunnelIfName, hwMplsTpLspType } STATUS current DESCRIPTION "This object indicates that the link receivs from an misconnection discription defect." ::= { hwMplsTpLspTrap 8 } hwMplsTpLspOamMisconnectionMEPClear NOTIFICATION-TYPE OBJECTS { hwMplsTpTunnelIfName, hwMplsTpLspType } STATUS current DESCRIPTION "This object indicates that the link recovers from an unexpect MEG-ID defect." ::= { hwMplsTpLspTrap 9 } hwMplsTpLspOamMisconnectionMEP NOTIFICATION-TYPE OBJECTS { hwMplsTpTunnelIfName, hwMplsTpLspType } STATUS current DESCRIPTION "This object indicates the link receivs an unexpect MEG-ID defect." ::= { hwMplsTpLspTrap 10 } hwMplsTpLspOamMisconnectionSECClear NOTIFICATION-TYPE OBJECTS { hwMplsTpTunnelIfName, hwMplsTpLspType } STATUS current DESCRIPTION "This object indicates that the link recovers from an Misconnection SEC defect ." ::= { hwMplsTpLspTrap 11 } hwMplsTpLspOamMisconnectionSEC NOTIFICATION-TYPE OBJECTS { hwMplsTpTunnelIfName, hwMplsTpLspType } STATUS current DESCRIPTION "This object indicates that the link receivs from an Misconnection SEC defect." ::= { hwMplsTpLspTrap 12 } -- 1.3.6.1.4.1.2011.5.25.305.3 hwMplsTpConformance OBJECT IDENTIFIER ::= { hwMplsTpMib 3 } -- 1.3.6.1.4.1.2011.5.25.305.3.1 hwMplsTpCompliances OBJECT IDENTIFIER ::= { hwMplsTpConformance 1 } -- 1.3.6.1.4.1.2011.5.25.305.3.2 hwMplsTpGroups OBJECT IDENTIFIER ::= { hwMplsTpConformance 2 } hwMplsTPGeneralGroup OBJECT-GROUP OBJECTS { hwMplsTpTunnelIfName, hwMplsTpTunnelAdminStatus, hwMplsTpTunnelOperStatus, hwMplsTpTunnelIngressInstance, hwMplsTpTunnelEgressInstance, hwMplsTpLspType } STATUS current DESCRIPTION "Indicate the atrributes of the TP tunnel." ::= { hwMplsTpGroups 1 } hwMplsTPNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { hwMplsTpTunnelDownClear, hwMplsTpTunnelDown, hwMplsTpTunnelResume, hwMplsTpTunnelSwitch, hwMplsTpLspOamDlocClear, hwMplsTpLspOamDloc, hwMplsTpLspOamRdiClear, hwMplsTpLspOamRdi, hwMplsTpLspOamMisconnectionEncapClear, hwMplsTpLspOamMisconnectionEncap, hwMplsTpLspOamMisconnectionDiscrClear, hwMplsTpLspOamMisconnectionDiscr, hwMplsTpLspOamMisconnectionMEPClear, hwMplsTpLspOamMisconnectionMEP, hwMplsTpLspOamMisconnectionSECClear, hwMplsTpLspOamMisconnectionSEC } STATUS current DESCRIPTION "Indicate the notification type." ::= { hwMplsTpGroups 2 } hwMplsTpCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "Description." MODULE HUAWEI-MPLS-TP-MIB GROUP hwMplsTPGeneralGroup DESCRIPTION "Indicate the atrributes of the TP tunnel." ::= { hwMplsTpCompliances 1 } END