-- ============================================================================ -- Copyright (C) 2018 by HUAWEI TECHNOLOGIES. All rights reserved. -- Description: The MIB is used to configure the simulation for the DSLAM. -- Reference: -- Version: V1.09 -- ============================================================================ HUAWEI-IPDSLAM-SIMULATION-MIB DEFINITIONS ::= BEGIN IMPORTS huaweiMgmt FROM HUAWEI-MIB IpAddress, Integer32, Unsigned32, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE FROM SNMPv2-SMI RowStatus, MacAddress FROM SNMPv2-TC InetAddress, InetAddressType FROM INET-ADDRESS-MIB; hwIpdslamSimulation MODULE-IDENTITY LAST-UPDATED "201809210000Z" ORGANIZATION "Huawei Technologies Co.,Ltd." CONTACT-INFO "Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China Website: http://www.huawei.com Email: support@huawei.com " DESCRIPTION "The MIB is used to configure the simulation for the DSLAM. " -- Revision history REVISION "201809210000Z" DESCRIPTION "V1.09, modify the description of hwOntDhcpSimulateOntPortType." REVISION "201703020000Z" DESCRIPTION "V1.08, add node hwOntDhcpSimulateMulticastGroupIPType, hwOntDhcpSimulateMulticastGroupIP, hwOntDhcpSimulateMulticastVersion, hwOntDhcpSimulateMulticastSourceIPType, hwOntDhcpSimulateMulticastSourceIP and hwOntDhcpSimulateMulticastDataRate, modify the value range of hwOntDhcpSimulateStatus and hwOntDhcpSimulateResult." REVISION "201503190000Z" DESCRIPTION "V1.07, modify the description of hwOntDhcpSimulateOntPortId." REVISION "201410190000Z" DESCRIPTION "V1.06, modify the access of hwDhcpSimulateRowStatus and hwOntDhcpSimulateRowStatus." REVISION "201306060000Z" DESCRIPTION "V1.05, add node hwOntDhcpSimulateOntPortType, modify the enumeration of hwOntDhcpSimulateResult." REVISION "201306050000Z" DESCRIPTION "V1.04, modify the description of the nodes which are hwDhcpSimulateUserVlanTagNumber, hwDhcpSimulateOption61Type, hwOntDhcpSimulateOption61Type." REVISION "201303180000Z" DESCRIPTION "V1.03, modify the description of the nodes which are hwDhcpSimulateUserVlanTagNumber, hwDhcpSimulateUserVlanid, hwDhcpSimulateOption61Type, hwOntDhcpSimulateOption61Type." REVISION "201105190000Z" DESCRIPTION "V1.00, add DHCP simulation." ::= { huaweiMgmt 113 } hwDhcpSimulateObject OBJECT IDENTIFIER ::= { hwIpdslamSimulation 1 } hwOntDhcpSimulateObject OBJECT IDENTIFIER ::= { hwIpdslamSimulation 2 } hwDhcpSimulateCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDhcpSimulateCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is mainly used to configure the DHCP simulation. You can use the set operation to set a leave in the table to start a DHCP simulation instance and simulate an actual user. You can use the get operation to query the existing DHCP simulation instances in the current system. The indexes of this table are hwDhcpSimulateFlowId and hwDhcpSimulateMacAddress. " ::= { hwDhcpSimulateObject 1 } hwDhcpSimulateCfgEntry OBJECT-TYPE SYNTAX HwDhcpSimulateCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is mainly used to configure the DHCP simulation. You can use the set operation to set a leave in the table to start a DHCP simulation instance and simulate an actual user. You can use the get operation to query the existing DHCP simulation instances in the current system. The indexes of this entry are hwDhcpSimulateFlowId and hwDhcpSimulateMacAddress. " INDEX { hwDhcpSimulateFlowId, hwDhcpSimulateMacAddress } ::= { hwDhcpSimulateCfgTable 1 } HwDhcpSimulateCfgEntry ::= SEQUENCE { hwDhcpSimulateFlowId Integer32, hwDhcpSimulateMacAddress MacAddress, hwDhcpSimulateUserVlanTagNumber Unsigned32, hwDhcpSimulateUserVlanid Unsigned32, hwDhcpSimulateOption60 OCTET STRING, hwDhcpSimulateOption61Type Unsigned32, hwDhcpSimulateOption61ClientId OCTET STRING, hwDhcpSimulatePingHost1IPAddress IpAddress, hwDhcpSimulatePingHost2IPAddress IpAddress, hwDhcpSimulatePingHost3IPAddress IpAddress, hwDhcpSimulatePingHost4IPAddress IpAddress, hwDhcpSimulatePingHost5IPAddress IpAddress, hwDhcpSimulateRowStatus RowStatus } hwDhcpSimulateFlowId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Indicates the flow ID of the user to be simulated. This leave is the index of hwDhcpSimulateCfgTable. The value of this leave must be set when a DHCP simulation is started on the OLT. " ::= { hwDhcpSimulateCfgEntry 1 } hwDhcpSimulateMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Indicates the MAC address of the user to be simulated. In the start of DHCP simulation, the recommended MAC address corresponding this leave is the MAC address of an actual user. This leave is the index of hwDhcpSimulateCfgTable. The value of this leave must be set when a DHCP simulation is started on the OLT. " ::= { hwDhcpSimulateCfgEntry 2 } hwDhcpSimulateUserVlanTagNumber OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the number of tags carried by the user-side packet. Options: 1. untag(0) -Indicates that the user packet is untagged. 2. singleTag(1) -Indicates that the user packet is single tag. 3. invalid(4294967295) -Invalid value, an invalid value is returned if the user vlan is not configured. " ::= { hwDhcpSimulateCfgEntry 3 } hwDhcpSimulateUserVlanid OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the VLAN ID of the user-side packet. If hwDhcpSimulateUserVlanTagNumber is 0, this item does not need to be configured. If the value of this leave is 0 and hwDhcpSimulateUserVlanTagNumber is 1, the current mode is priority-tag. An invalid value(4294967295) is returned if the user vlan is not configured or the user vlan tag number is configured untag. Range: 0-4095. " ::= { hwDhcpSimulateCfgEntry 4 } hwDhcpSimulateOption60 OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the option 60 contents of the DHCP simulation instance. The length is 0-64 bytes. The system considers that this leave is not configured when the length is 0. " ::= { hwDhcpSimulateCfgEntry 5 } hwDhcpSimulateOption61Type OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the option 61 type of the DHCP simulation instance. The values are 0 and 1. Options: 1. string(0) -Indicates that the option 61 contents are a string. 2. mac(1) -Indicates that the option 61 contents are a hardware address. 3. invalid(4294967295) -Invalid value, an invalid value is returned if the option61 type is not configured. " ::= { hwDhcpSimulateCfgEntry 6 } hwDhcpSimulateOption61ClientId OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the option 61 contents of the DHCP simulation instance. The length is 0-64 bytes. " ::= { hwDhcpSimulateCfgEntry 7 } hwDhcpSimulatePingHost1IPAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the first host IP address to be pinged in the DHCP simulation instance. After an IP address is requested successfully in the DHCP simulation instance, this IP address is pinged to verify the connectivity to the host. " ::= { hwDhcpSimulateCfgEntry 8 } hwDhcpSimulatePingHost2IPAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the second host IP address to be pinged in the DHCP simulation instance. After an IP address is requested successfully in the DHCP simulation instance, this IP address is pinged to verify the connectivity to the host. " ::= { hwDhcpSimulateCfgEntry 9 } hwDhcpSimulatePingHost3IPAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the third host IP address to be pinged in the DHCP simulation instance. After an IP address is requested successfully in the DHCP simulation instance, this IP address is pinged to verify the connectivity to the host. " ::= { hwDhcpSimulateCfgEntry 10 } hwDhcpSimulatePingHost4IPAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the fourth host IP address to be pinged in the DHCP simulation instance. After an IP address is requested successfully in the DHCP simulation instance, this IP address is pinged to verify the connectivity to the host. " ::= { hwDhcpSimulateCfgEntry 11 } hwDhcpSimulatePingHost5IPAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the fifth host IP address to be pinged in the DHCP simulation instance. After an IP address is requested successfully in the DHCP simulation instance, this IP address is pinged to verify the connectivity to the host. " ::= { hwDhcpSimulateCfgEntry 12 } hwDhcpSimulateRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the operation type and is mainly used to start or stop the DHCP simulation. During query, if the corresponding simulation instance exists, the result is active. Options: 1. active(1) -indicates the query operation. 2. createAndGo(4) -means to create a DHCP simulation. 3. destroy(6) -means to stop a DHCP simulation. " ::= { hwDhcpSimulateCfgEntry 13 } hwDhcpSimulateResultTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDhcpSimulateResultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the simulation result. During simulation, you can perform the get operation to query the simulation result of the simulation instance. The indexes of this table are hwDhcpSimulateFlowId and hwDhcpSimulateMacAddress. " ::= { hwDhcpSimulateObject 2 } hwDhcpSimulateResultEntry OBJECT-TYPE SYNTAX HwDhcpSimulateResultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the simulation result. During simulation, you can perform the get operation to query the simulation result of the simulation instance. The indexes of this entry are hwDhcpSimulateFlowId and hwDhcpSimulateMacAddress. " INDEX { hwDhcpSimulateFlowId, hwDhcpSimulateMacAddress } ::= { hwDhcpSimulateResultTable 1 } HwDhcpSimulateResultEntry ::= SEQUENCE { hwDhcpSimulateStatus INTEGER, hwDhcpSimulateResult INTEGER, hwDhcpSimulateUserIp IpAddress, hwDhcpSimulateSubNetMask IpAddress, hwDhcpSimulateDhcpServerIp IpAddress, hwDhcpSimulatePrimaryDnsServerIp IpAddress, hwDhcpSimulateSecondaryDnsServerIp IpAddress, hwDhcpSimulateGatewayIp IpAddress, hwDhcpSimulateDefaultGatewayIp IpAddress, hwDhcpSimulateDest1IpAddr IpAddress, hwDhcpSimulateDest1MaskAddr IpAddress, hwDhcpSimulateDest1NextHop IpAddress, hwDhcpSimulateDest2IpAddr IpAddress, hwDhcpSimulateDest2MaskAddr IpAddress, hwDhcpSimulateDest2NextHop IpAddress, hwDhcpSimulateDest3IpAddr IpAddress, hwDhcpSimulateDest3MaskAddr IpAddress, hwDhcpSimulateDest3NextHop IpAddress, hwDhcpSimulatePingHost1TotalCount Unsigned32, hwDhcpSimulatePingHost1OkCount Unsigned32, hwDhcpSimulatePingHost2TotalCount Unsigned32, hwDhcpSimulatePingHost2OkCount Unsigned32, hwDhcpSimulatePingHost3TotalCount Unsigned32, hwDhcpSimulatePingHost3OkCount Unsigned32, hwDhcpSimulatePingHost4TotalCount Unsigned32, hwDhcpSimulatePingHost4OkCount Unsigned32, hwDhcpSimulatePingHost5TotalCount Unsigned32, hwDhcpSimulatePingHost5OkCount Unsigned32, hwDhcpSimulateTftpServer OCTET STRING, hwDhcpSimulateBootFileName OCTET STRING, hwDhcpSimulateTimeServerIp IpAddress } hwDhcpSimulateStatus OBJECT-TYPE SYNTAX INTEGER{ dhcpProcessing(1), pingProcessing(2), finished(3), unknown(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the simulation status of the current simulation instance. Options: 1. dhcpProcessing(1) -indicates DHCP processing. 2. pingProcessing(2) -indicates ping processing. 3. finished(3) -Indicates that the simulation is finished. 4. unknown(4) -indicates other status. " ::= { hwDhcpSimulateResultEntry 1 } hwDhcpSimulateResult OBJECT-TYPE SYNTAX INTEGER{ sendPacketFail(1), dhcpServerNotFound(2), dhcpServerRejectRequest(3), getIpOvertime(4), getIpSuccessful(5), allPingSucceed(6), partialPingSucceed(7), allPingFail(8), systemResourceNotEnough(9), unknown(10) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the simulation result of the current simulation instance. Options: 1. sendPacketFail(1) -Indicates that the packet fails to be sent. 2. dhcpServerNotFound(2) -Indicates that the DHCP server cannot be found. 3. dhcpServerRejectRequest(3) -Indicates that the DHCP server rejects the request. 4. getIpOvertime(4) -Indicates that the request for IP address is overtime. 5. getIpSuccessful(5) -Indicates that the request for IP address succeeds. 6. allPingSucceed(6) -Indicates that all ping operations succeed. 7. partialPingSucceed(7) -Indicates that parts of ping operations succeed. 8. allPingFail(8) -Indicates that all ping operations fail. 9. systemResourceNotEnough(9) -Indicates that the resource is not enough. 10. unknown(10) -Indicates other results. " ::= { hwDhcpSimulateResultEntry 2 } hwDhcpSimulateUserIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the simulation user IP address that is obtained in the DHCP simulation instance. " ::= { hwDhcpSimulateResultEntry 3 } hwDhcpSimulateSubNetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the mask of the simulation user IP address that is obtained in the DHCP simulation instance. " ::= { hwDhcpSimulateResultEntry 4 } hwDhcpSimulateDhcpServerIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the DHCP server IP address in the DHCP simulation instance. " ::= { hwDhcpSimulateResultEntry 5 } hwDhcpSimulatePrimaryDnsServerIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the IP address of the primary DNS server in the DHCP simulation instance. " ::= { hwDhcpSimulateResultEntry 6 } hwDhcpSimulateSecondaryDnsServerIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the IP address of the secondary DNS server in the DHCP simulation instance. " ::= { hwDhcpSimulateResultEntry 7 } hwDhcpSimulateGatewayIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the IP address of the gateway in the DHCP simulation instance. " ::= { hwDhcpSimulateResultEntry 8 } hwDhcpSimulateDefaultGatewayIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the IP address of the default gateway in the DHCP simulation instance. " ::= { hwDhcpSimulateResultEntry 9 } hwDhcpSimulateDest1IpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the destination IP address of the first route in the DHCP simulation instance. " ::= { hwDhcpSimulateResultEntry 10 } hwDhcpSimulateDest1MaskAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the mask corresponding to the destination IP address of the first route in the DHCP simulation instance. " ::= { hwDhcpSimulateResultEntry 11 } hwDhcpSimulateDest1NextHop OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the next hop IP address of the first route in the DHCP simulation instance. " ::= { hwDhcpSimulateResultEntry 12 } hwDhcpSimulateDest2IpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the destination IP address of the second route in the DHCP simulation instance. " ::= { hwDhcpSimulateResultEntry 13 } hwDhcpSimulateDest2MaskAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the mask corresponding to the destination IP address of the second route in the DHCP simulation instance. " ::= { hwDhcpSimulateResultEntry 14 } hwDhcpSimulateDest2NextHop OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the next hop IP address of the second route in the DHCP simulation instance. " ::= { hwDhcpSimulateResultEntry 15 } hwDhcpSimulateDest3IpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the destination IP address of the third route in the DHCP simulation instance. " ::= { hwDhcpSimulateResultEntry 16 } hwDhcpSimulateDest3MaskAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the mask corresponding to the destination IP address of the third route in the DHCP simulation instance. " ::= { hwDhcpSimulateResultEntry 17 } hwDhcpSimulateDest3NextHop OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the next hop IP address of the third route in the DHCP simulation instance. " ::= { hwDhcpSimulateResultEntry 18 } hwDhcpSimulatePingHost1TotalCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the total times of pinging the first host IP address in the DHCP simulation instance. " ::= { hwDhcpSimulateResultEntry 19 } hwDhcpSimulatePingHost1OkCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the times of successfully pinging the first host IP address in the DHCP simulation instance. " ::= { hwDhcpSimulateResultEntry 20 } hwDhcpSimulatePingHost2TotalCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the total times of pinging the second host IP address in the DHCP simulation instance. " ::= { hwDhcpSimulateResultEntry 21 } hwDhcpSimulatePingHost2OkCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the times of successfully pinging the second host IP address in the DHCP simulation instance. " ::= { hwDhcpSimulateResultEntry 22 } hwDhcpSimulatePingHost3TotalCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the total times of pinging the third host IP address in the DHCP simulation instance. " ::= { hwDhcpSimulateResultEntry 23 } hwDhcpSimulatePingHost3OkCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the times of successfully pinging the third host IP address in the DHCP simulation instance. " ::= { hwDhcpSimulateResultEntry 24 } hwDhcpSimulatePingHost4TotalCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the total times of pinging the fourth host IP address in the DHCP simulation instance. " ::= { hwDhcpSimulateResultEntry 25 } hwDhcpSimulatePingHost4OkCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the times of successfully pinging the fourth host IP address in the DHCP simulation instance. " ::= { hwDhcpSimulateResultEntry 26 } hwDhcpSimulatePingHost5TotalCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the total times of pinging the fifth host IP address in the DHCP simulation instance. " ::= { hwDhcpSimulateResultEntry 27 } hwDhcpSimulatePingHost5OkCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the times of successfully pinging the fifth host IP address in the DHCP simulation instance. " ::= { hwDhcpSimulateResultEntry 28 } hwDhcpSimulateTftpServer OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the name of the Tftp server in the DHCP simulation instance. The length is 0-256 bytes. " ::= { hwDhcpSimulateResultEntry 29 } hwDhcpSimulateBootFileName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the name of the boot file in the DHCP simulation instance. The length is 0-256 bytes. " ::= { hwDhcpSimulateResultEntry 30 } hwDhcpSimulateTimeServerIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the IP address of the time server in the DHCP simulation instance. " ::= { hwDhcpSimulateResultEntry 31 } hwOntDhcpSimulateCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF HwOntDhcpSimulateCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is mainly used to configure the ONT DHCP simulation. You can use the set operation to set a leave in the table to start an ONT DHCP simulation instance and simulate an actual user. You can use the get operation to query the existing ONT DHCP simulation instances in the current system. The indexes of this table are hwOntDhcpSimulatePortindex and hwOntDhcpSimulateOntId. " ::= { hwOntDhcpSimulateObject 1 } hwOntDhcpSimulateCfgEntry OBJECT-TYPE SYNTAX HwOntDhcpSimulateCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is mainly used to configure the ONT DHCP simulation. You can use the set operation to set a leave in the table to start an ONT DHCP simulation instance and simulate an actual user. You can use the get operation to query the existing ONT DHCP simulation instances in the current system. The indexes of this entry are hwOntDhcpSimulatePortindex and hwOntDhcpSimulateOntId. " INDEX { hwOntDhcpSimulatePortindex, hwOntDhcpSimulateOntId } ::= { hwOntDhcpSimulateCfgTable 1 } HwOntDhcpSimulateCfgEntry ::= SEQUENCE { hwOntDhcpSimulatePortindex Unsigned32, hwOntDhcpSimulateOntId Integer32, hwOntDhcpSimulateOntPortId Unsigned32, hwOntDhcpSimulateUserVlanTagNumber Unsigned32, hwOntDhcpSimulateUserOuterVlanId Unsigned32, hwOntDhcpSimulateUserOuterPriority Unsigned32, hwOntDhcpSimulateUserInnerVlanId Unsigned32, hwOntDhcpSimulateUserInnerPriority Unsigned32, hwOntDhcpSimulateMacAddress MacAddress, hwOntDhcpSimulateOption60 OCTET STRING, hwOntDhcpSimulateOption61Type Unsigned32, hwOntDhcpSimulateOption61ClientId OCTET STRING, hwOntDhcpSimulatePingHost1IPAddress IpAddress, hwOntDhcpSimulatePingHost2IPAddress IpAddress, hwOntDhcpSimulatePingHost3IPAddress IpAddress, hwOntDhcpSimulatePingHost4IPAddress IpAddress, hwOntDhcpSimulatePingHost5IPAddress IpAddress, hwOntDhcpSimulateRowStatus RowStatus, hwOntDhcpSimulateOntPortType INTEGER, hwOntDhcpSimulateMulticastGroupIPType InetAddressType, hwOntDhcpSimulateMulticastGroupIP InetAddress, hwOntDhcpSimulateMulticastVersion INTEGER, hwOntDhcpSimulateMulticastSourceIPType InetAddressType, hwOntDhcpSimulateMulticastSourceIP InetAddress } hwOntDhcpSimulatePortindex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the ptp index corresponding to the user to be simulated in the ONT DHCP simulation instance. " ::= { hwOntDhcpSimulateCfgEntry 1 } hwOntDhcpSimulateOntId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the ONT ID of the user to be simulated in the ONT DHCP simulation instance. " ::= { hwOntDhcpSimulateCfgEntry 2 } hwOntDhcpSimulateOntPortId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the ONT port ID. All-Fs indicates that the port is a WAN port and non-all Fs indicates that the port is a user-side port. " ::= { hwOntDhcpSimulateCfgEntry 3 } hwOntDhcpSimulateUserVlanTagNumber OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the number of VLAN tags when user packets are sent to the ONT. Range: 0-2. 0 - untag. 1 - simgle tag. 2 - double tag. " ::= { hwOntDhcpSimulateCfgEntry 4 } hwOntDhcpSimulateUserOuterVlanId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the outer VLAN ID of user packets and is used with TagNumber. This parameter can be ignored in the case of untag. It is valid in the case of single-tag or double-tag, and the range is 0-4095. All-Fs indicates invalid and no user input. Range: 0-4095. This leave is used when the number of VLAN tags is 1 or 2. " ::= { hwOntDhcpSimulateCfgEntry 5 } hwOntDhcpSimulateUserOuterPriority OBJECT-TYPE SYNTAX Unsigned32 (0..7 | 4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the outer VLAN priority of user packets and is used with TagNumber. This parameter can be ignored in the case of untag. It is valid in the case of single-tag or double-tag, and the range is 0-7. All-Fs indicates invalid and no user input. The default value is 0 in the case of no user input. Range: 0-7. " ::= { hwOntDhcpSimulateCfgEntry 6 } hwOntDhcpSimulateUserInnerVlanId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the inner VLAN ID of user packets and is used with TagNumber. This parameter is valid in the case of double-tag, and the range is 0-4095. All-Fs indicates invalid and no user input. Range: 0-4095. " ::= { hwOntDhcpSimulateCfgEntry 7 } hwOntDhcpSimulateUserInnerPriority OBJECT-TYPE SYNTAX Unsigned32 (0..7 | 4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the inner VLAN priority of user packets and is used with TagNumber. This parameter is valid in the case of double-tag, and the range is 0-7. All-Fs indicates invalid and no user input. The default value is 0 in the case of no user input. Range: 0-7. " ::= { hwOntDhcpSimulateCfgEntry 8 } hwOntDhcpSimulateMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the source MAC address used in the simulation. " ::= { hwOntDhcpSimulateCfgEntry 9 } hwOntDhcpSimulateOption60 OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the option 60 contents of the ONT DHCP simulation. Character string type, a string of 0-64 characters. " ::= { hwOntDhcpSimulateCfgEntry 10 } hwOntDhcpSimulateOption61Type OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the option 61 type of the ONT DHCP simulation. Values: 0-1. 0 indicates character string type and 1 indicate MAC address type. Options: 1. string(0) -Indicates that the option 61 contents are a string. 2. mac(1) -Indicates that the option 61 contents are a hardware address. 3. invalid(4294967295) -Invalid value, an invalid value is returned if the option61 type is not configured. " ::= { hwOntDhcpSimulateCfgEntry 11 } hwOntDhcpSimulateOption61ClientId OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the option 61 contents of the ONT DHCP simulation. Character string type, a string of 0-64 characters. Optiontype = 0 and null in this field indicate no user input for option 61. " ::= { hwOntDhcpSimulateCfgEntry 12 } hwOntDhcpSimulatePingHost1IPAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the first host IP address to be pinged in the ONT DHCP simulation instance. After an IP address is requested successfully in the DHCP simulation instance, this IP address is pinged to verify the connectivity to the host. " ::= { hwOntDhcpSimulateCfgEntry 13 } hwOntDhcpSimulatePingHost2IPAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the second host IP address to be pinged in the ONT DHCP simulation. After an IP address is requested successfully in the DHCP simulation instance, this IP address is pinged to verify the connectivity to the host. " ::= { hwOntDhcpSimulateCfgEntry 14 } hwOntDhcpSimulatePingHost3IPAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the third host IP address to be pinged in the ONT DHCP simulation instance. After an IP address is requested successfully in the DHCP simulation instance, this IP address is pinged to verify the connectivity to the host. " ::= { hwOntDhcpSimulateCfgEntry 15 } hwOntDhcpSimulatePingHost4IPAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the fourth host IP address to be pinged in the ONT DHCP simulation instance. After an IP address is requested successfully in the DHCP simulation instance, this IP address is pinged to verify the connectivity to the host. " ::= { hwOntDhcpSimulateCfgEntry 16 } hwOntDhcpSimulatePingHost5IPAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the fifth host IP address to be pinged in the ONT DHCP simulation instance. After an IP address is requested successfully in the DHCP simulation instance, this IP address is pinged to verify the connectivity to the host. " ::= { hwOntDhcpSimulateCfgEntry 17 } hwOntDhcpSimulateRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the operation type and is mainly used to start or stop the ONT DHCP simulation. During query, if the corresponding simulation instance exists, the result is active. Options: 1. active(1) -indicates the query operation. 2. createAndGo(4) -means to create a DHCP simulation. 3. destroy(6) -means to stop a DHCP simulation. " ::= { hwOntDhcpSimulateCfgEntry 18 } hwOntDhcpSimulateOntPortType OBJECT-TYPE SYNTAX INTEGER { laneth(1), lanvdsl(2), wan(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the ONT port type of the user to be simulated in the ONT DHCP simulation instance. Options: 1. laneth(1) -indicates the type of the ONT port is ETH 2. lanvdsl(2) -indicates the type of the ONT port is VDSL 3. wan(3) -indicates the type of the ONT port is WAN " ::= { hwOntDhcpSimulateCfgEntry 19 } hwOntDhcpSimulateMulticastGroupIPType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the address type. Options: 1. IPv4(1) -indicates the address type is IPv4. " ::= { hwOntDhcpSimulateCfgEntry 20 } hwOntDhcpSimulateMulticastGroupIP OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the group IP address of the program. The format of this index is consistent with that of the address type. " ::= { hwOntDhcpSimulateCfgEntry 21 } hwOntDhcpSimulateMulticastVersion OBJECT-TYPE SYNTAX INTEGER { igmpV2(1), igmpV3(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the multicast version in the ONT Multicast simulation instance. Options: 1. igmpV2(1) -indicates the multicast version is IGMPV2. 2. igmpV3(2) -indicates the multicast version is IGMPV3. Default: igmpV2(1). " ::= { hwOntDhcpSimulateCfgEntry 22 } hwOntDhcpSimulateMulticastSourceIPType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the address type. Options: 1. IPv4(1) -indicates the address type is IPv4. " ::= { hwOntDhcpSimulateCfgEntry 23 } hwOntDhcpSimulateMulticastSourceIP OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the source IP address of the program. The format of this index is consistent with that of the address type. " ::= { hwOntDhcpSimulateCfgEntry 24 } hwOntDhcpSimulateResultTable OBJECT-TYPE SYNTAX SEQUENCE OF HwOntDhcpSimulateResultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the ONT simulation result. During simulation, you can perform the get operation to query the simulation result of the simulation instance. The indexes of this table are hwOntDhcpSimulatePortindex and hwOntDhcpSimulateOntId. " ::= { hwOntDhcpSimulateObject 2 } hwOntDhcpSimulateResultEntry OBJECT-TYPE SYNTAX HwOntDhcpSimulateResultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the ONT simulation result. During simulation, you can perform the get operation to query the simulation result of the simulation instance. The indexes of this entry are hwOntDhcpSimulatePortindex and hwOntDhcpSimulateOntId. " INDEX { hwOntDhcpSimulatePortindex, hwOntDhcpSimulateOntId } ::= { hwOntDhcpSimulateResultTable 1 } HwOntDhcpSimulateResultEntry ::= SEQUENCE { hwOntDhcpSimulateStatus INTEGER, hwOntDhcpSimulateResult INTEGER, hwOntDhcpSimulateUserIp IpAddress, hwOntDhcpSimulateSubNetMask IpAddress, hwOntDhcpSimulateDhcpServerIp IpAddress, hwOntDhcpSimulatePrimaryDnsServerIp IpAddress, hwOntDhcpSimulateSecondaryDnsServerIp IpAddress, hwOntDhcpSimulateGatewayIp IpAddress, hwOntDhcpSimulateDefaultGatewayIp IpAddress, hwOntDhcpSimulateDest1IpAddr IpAddress, hwOntDhcpSimulateDest1MaskAddr IpAddress, hwOntDhcpSimulateDest1NextHop IpAddress, hwOntDhcpSimulateDest2IpAddr IpAddress, hwOntDhcpSimulateDest2MaskAddr IpAddress, hwOntDhcpSimulateDest2NextHop IpAddress, hwOntDhcpSimulateDest3IpAddr IpAddress, hwOntDhcpSimulateDest3MaskAddr IpAddress, hwOntDhcpSimulateDest3NextHop IpAddress, hwOntDhcpSimulatePingHost1TotalCount Unsigned32, hwOntDhcpSimulatePingHost1OkCount Unsigned32, hwOntDhcpSimulatePingHost2TotalCount Unsigned32, hwOntDhcpSimulatePingHost2OkCount Unsigned32, hwOntDhcpSimulatePingHost3TotalCount Unsigned32, hwOntDhcpSimulatePingHost3OkCount Unsigned32, hwOntDhcpSimulatePingHost4TotalCount Unsigned32, hwOntDhcpSimulatePingHost4OkCount Unsigned32, hwOntDhcpSimulatePingHost5TotalCount Unsigned32, hwOntDhcpSimulatePingHost5OkCount Unsigned32, hwOntDhcpSimulateMulticastDataRate Unsigned32 } hwOntDhcpSimulateStatus OBJECT-TYPE SYNTAX INTEGER{ dhcpProcessing(1), pingProcessing(2), finished(3), unknown(4), btvProcessing(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the simulation status of the current simulation instance. Options: 1. dhcpProcessing(1) -Indicates DHCP processing. 2. pingProcessing(2) -Indicates ping processing. 3. finished(3) -Indicates that the simulation is finished. 4. unknown(4) -Indicates other status. 5. btvProcessing(5) -Indicates BTV processing. " ::= { hwOntDhcpSimulateResultEntry 1 } hwOntDhcpSimulateResult OBJECT-TYPE SYNTAX INTEGER{ success(1), userStop(2), deviceNotSupport(3), portNotFound(4), userMacError(5), pingDestIpError(6), vlanPriParaError(7), dhcpOptionError(8), wanNotFound(9), wanStateError(10), portStateError(11), userVlanError(12), devResourceNotEnough(13), gemportError(14), sendPktError(15), dhcpServerNotFound(16), dhcpServerDeny(17), getIpTimeout(18), concurrentSmltForbidden(19), allPingFail(20), partialPingFail(21), unknown(22), btvTestFail(23), btvTestSuccess(24), btvTestUserStopped(25), btvTestGroupIpError(26), btvTestSourceIpError(27), btvTestIGMPVersionError(28), btvTestVlanError(29), btvTestStartError(30) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the simulation result of the current simulation instance. Options: 1. success(1) -Indicates that ont dhcp simulation succeeds. 2. userStop(2) -Indicates that user stopped the ont simulation. 3. deviceNotSupport(3) -Indicates that the device does not support simulation. 4. portNotFound(4) -Indicates that the port is not found. 5. userMacError(5) -Indicates that user mac is invalid. 6. pingDestIpError(6) -Indicates that the destination ip(s) for ping is(are) invalid. 7. vlanPriParaError(7) -Indicates that the VLAN or priority parameters are invalid. 8. dhcpOptionError(8) -Indicates that dhcp options have some errors. 9. wanNotFound(9) -Indicates that WAN port is not found. 10. wanStateError(10) -Indicates that WAN port is in error state. 11. portStateError(11) -Indicates that the port is in error state. 12. userVlanError(12) -Indicates that user vlan has some error. 13. devResourceNotEnough(13) -Indicates that the resource for the device is not enough. 14. gemportError(14) -Indicates that gemport has some error. 15. sendPktError(15) -Indicates that the packet fails to be sent. 16. dhcpServerNotFound(16) -Indicates that the DHCP server cannot be found. 17. dhcpServerDeny(17) -Indicates that the DHCP server rejects the request. 18. getIpTimeout(18) -Indicates that the request for IP address is overtime. 19. concurrentSmltForbidden(19) -Indicates that the specified ont does not support concurrent simulations. 20. allPingFail(20) -Indicates that all ping operations fail. 21. partialPingFail(21) -Indicates that that parts of ping operations fail. 22. unknown(22) -Indicates that the result is unknown. 23. btvTestFail(23) -Indicates that ont multicast simulation fails. 24. btvTestSuccess(24) -Indicates that ont multicast simulation succeeds. 25. btvTestUserStopped(25) -Indicates that user stopped the ont multicast simulation. 26. btvTestGroupIpError(26) -Indicates that multicast group ip is invalid. 27. btvTestSourceIpError(27) -Indicates that multicast source ip is invalid. 28. btvTestIGMPVersionError(28) -Indicates that multicast IGMP version is error version. 29. btvTestVlanError(29) -Indicates that multicast vlan has some error. 30. btvTestStartError(30) -Indicates that starting multicast simulation has some error. " ::= { hwOntDhcpSimulateResultEntry 2 } hwOntDhcpSimulateUserIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the simulation user IP address that is obtained in the ONT DHCP simulation instance. " ::= { hwOntDhcpSimulateResultEntry 3 } hwOntDhcpSimulateSubNetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the mask of the simulation user IP address that is obtained in the ONT DHCP simulation instance. " ::= { hwOntDhcpSimulateResultEntry 4 } hwOntDhcpSimulateDhcpServerIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the DHCP server IP address in the ONT DHCP simulation instance. " ::= { hwOntDhcpSimulateResultEntry 5 } hwOntDhcpSimulatePrimaryDnsServerIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the IP address of the primary DNS server in the ONT DHCP simulation instance. " ::= { hwOntDhcpSimulateResultEntry 6 } hwOntDhcpSimulateSecondaryDnsServerIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the IP address of the secondary DNS server in the ONT DHCP simulation instance. " ::= { hwOntDhcpSimulateResultEntry 7 } hwOntDhcpSimulateGatewayIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the IP address of the gateway in the ONT DHCP simulation instance. " ::= { hwOntDhcpSimulateResultEntry 8 } hwOntDhcpSimulateDefaultGatewayIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the IP address of the default gateway in the ONT DHCP simulation instance. " ::= { hwOntDhcpSimulateResultEntry 9 } hwOntDhcpSimulateDest1IpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the destination IP address of the first route in the ONT DHCP simulation instance. " ::= { hwOntDhcpSimulateResultEntry 10 } hwOntDhcpSimulateDest1MaskAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the mask corresponding to the destination IP address of the first route in the ONT DHCP simulation instance. " ::= { hwOntDhcpSimulateResultEntry 11 } hwOntDhcpSimulateDest1NextHop OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the next hop IP address of the first route in the ONT DHCP simulation instance. " ::= { hwOntDhcpSimulateResultEntry 12 } hwOntDhcpSimulateDest2IpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the destination IP address of the second route in the ONT DHCP simulation instance. " ::= { hwOntDhcpSimulateResultEntry 13 } hwOntDhcpSimulateDest2MaskAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the mask corresponding to the destination IP address of the second route in the ONT DHCP simulation instance. " ::= { hwOntDhcpSimulateResultEntry 14 } hwOntDhcpSimulateDest2NextHop OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the next hop IP address of the second route in the ONT DHCP simulation instance. " ::= { hwOntDhcpSimulateResultEntry 15 } hwOntDhcpSimulateDest3IpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the destination IP address of the third route in the ONT DHCP simulation instance. " ::= { hwOntDhcpSimulateResultEntry 16 } hwOntDhcpSimulateDest3MaskAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the mask corresponding to the destination IP address of the third route in the ONT DHCP simulation instance. " ::= { hwOntDhcpSimulateResultEntry 17 } hwOntDhcpSimulateDest3NextHop OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the next hop IP address of the third route in the ONT DHCP simulation instance. " ::= { hwOntDhcpSimulateResultEntry 18 } hwOntDhcpSimulatePingHost1TotalCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the total times of pinging the first host IP address in the ONT DHCP simulation instance. " ::= { hwOntDhcpSimulateResultEntry 19 } hwOntDhcpSimulatePingHost1OkCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the times of successfully pinging the first host IP address in the ONT DHCP simulation instance. " ::= { hwOntDhcpSimulateResultEntry 20 } hwOntDhcpSimulatePingHost2TotalCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the total times of pinging the second host IP address in the ONT DHCP simulation instance. " ::= { hwOntDhcpSimulateResultEntry 21 } hwOntDhcpSimulatePingHost2OkCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the times of successfully pinging the second host IP address in the ONT DHCP simulation instance. " ::= { hwOntDhcpSimulateResultEntry 22 } hwOntDhcpSimulatePingHost3TotalCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the total times of pinging the third host IP address in the ONT DHCP simulation instance. " ::= { hwOntDhcpSimulateResultEntry 23 } hwOntDhcpSimulatePingHost3OkCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the times of successfully pinging the third host IP address in the ONT DHCP simulation instance. " ::= { hwOntDhcpSimulateResultEntry 24 } hwOntDhcpSimulatePingHost4TotalCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the total times of pinging the fourth host IP address in the ONT DHCP simulation instance. " ::= { hwOntDhcpSimulateResultEntry 25 } hwOntDhcpSimulatePingHost4OkCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the times of successfully pinging the fourth host IP address in the ONT DHCP simulation instance. " ::= { hwOntDhcpSimulateResultEntry 26 } hwOntDhcpSimulatePingHost5TotalCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the total times of pinging the fifth host IP address in the ONT DHCP simulation instance. " ::= { hwOntDhcpSimulateResultEntry 27 } hwOntDhcpSimulatePingHost5OkCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the times of successfully pinging the fifth host IP address in the ONT DHCP simulation instance. " ::= { hwOntDhcpSimulateResultEntry 28 } hwOntDhcpSimulateMulticastDataRate OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the multicast date rate of the current simulation instance, it is valid when the simulation result is success. Unit: kbps. " ::= { hwOntDhcpSimulateResultEntry 29 } hwSimulationCommonTraps OBJECT IDENTIFIER ::= { hwIpdslamSimulation 3 } hwSimulationCommonTrapsPrefix OBJECT IDENTIFIER ::= { hwSimulationCommonTraps 0 } hwDhcpSimulateExtStatusTrap NOTIFICATION-TYPE OBJECTS { hwDhcpSimulateFlowId, hwDhcpSimulateMacAddress, hwDhcpSimulateStatus, hwDhcpSimulateResult } STATUS current DESCRIPTION "This item is mainly used to notify the gateway of the simulation status and result when the simulation is finished. It mainly includes four items: flow ID, MAC address, simulation status, and simulation result. " ::= { hwSimulationCommonTraps 0 1 } hwOntDhcpSimulateExtStatusTrap NOTIFICATION-TYPE OBJECTS { hwOntDhcpSimulatePortindex, hwOntDhcpSimulateOntId, hwOntDhcpSimulateStatus, hwOntDhcpSimulateResult } STATUS current DESCRIPTION "This item is mainly used to notify the gateway of the simulation status and result when the simulation is finished. It mainly includes four items: port ID, ONT ID, simulation status, and simulation result. " ::= { hwSimulationCommonTraps 0 2 } END