-- ============================================================================ -- Copyright (C) 2019 by HUAWEI TECHNOLOGIES. All rights reserved. -- Description: This MIB object provides IPDR settings, including settings of -- sessions, collectors, the association between sessions and collectors, and IPDR parameters. -- Reference: -- Version: V1.08 -- ============================================================================ HUAWEI-IPDR-MIB DEFINITIONS ::= BEGIN IMPORTS huaweiUtility FROM HUAWEI-MIB OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE, Unsigned32, Counter32, Integer32 FROM SNMPv2-SMI RowStatus, DisplayString FROM SNMPv2-TC InetAddressType, InetAddress FROM INET-ADDRESS-MIB; hwIpdr MODULE-IDENTITY LAST-UPDATED "201902260000Z" ORGANIZATION "Huawei Technologies Co.,Ltd." CONTACT-INFO "Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China Website: http://www.huawei.com Email: support@huawei.com " DESCRIPTION " This MIB object provides IPDR settings, including settings of sessions, collectors, the association between sessions and collectors, and IPDR parameters. " -- Revision history REVISION "201902260000Z" DESCRIPTION "V1.08, Modify the value of hwIpdrSessionId from (1..255) to (4294967295 | 1..255)." REVISION "201902140000Z" DESCRIPTION "V1.07, add the hwIpdrOntSwitch to hwIpdrSystemPara." REVISION "201708170000Z" DESCRIPTION "V1.06, Modify the value of hwIpdrCollectorVpnInstance from (1..31) to (0..31)." REVISION "201706140000Z" DESCRIPTION "V1.05, add the hwIpdrCollectorVpnInstance to HwIpdrCollectorEntry." REVISION "201505190000Z" DESCRIPTION "V1.04, 1. Node name is modified [hwIpdrSessionAdminStatu -> hwIpdrSessionAdminStatus,hwIpdrSessionRowStatu -> hwIpdrSessionRowStatus,hwIpdrCollectorRowstatu -> hwIpdrCollectorRowstatus,hwIpdrSessionAndCollectorRowstatu -> hwIpdrSessionAndCollectorRowstatus]. 2. Modify the MAX-ACCESS value of hwIpdrCollectorRowstatus and hwIpdrSessionAndCollectorRowstatus from read-write to read-create. 3. Modify the INDEX of hwIpdrSessionAndCollectorEntry from { hwIpdrSessionId, hwIpdrCollectorName } to { hwIpdrSessionId, IMPLIED hwIpdrCollectorName }." REVISION "201406300000Z" DESCRIPTION "V1.03, 1. removed all hyphens (-) from enumerated values of hwIpdrTemplate. 2. removed all hyphens (-) from enumerated values of hwIpdrCollectorMethod." REVISION "201308120000Z" DESCRIPTION "V1.02, add hwIpdrCollectorType node in table hwIpdrSystemPara." REVISION "201305290000Z" DESCRIPTION "V1.01, modified the unconfig value of hwIpdrTemplate and hwIpdrCollectorMethod." REVISION "201304240000Z" DESCRIPTION "V1.00, completed the draft." ::= { huaweiUtility 184 } hwIpdrSessionTable OBJECT-TYPE SYNTAX SEQUENCE OF HwIpdrSessionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " A session table is used to create a session. The index of this table is hwIpdrSessionId. " ::= { hwIpdr 1 } hwIpdrSessionEntry OBJECT-TYPE SYNTAX HwIpdrSessionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " A session table is used to create a session. The index of this entry is hwIpdrSessionId. " INDEX { hwIpdrSessionId } ::= { hwIpdrSessionTable 1 } HwIpdrSessionEntry ::= SEQUENCE { hwIpdrSessionId Unsigned32, hwIpdrSessionName OCTET STRING, hwIpdrSessionDesc OCTET STRING, hwIpdrSessionTransCounter Counter32, hwIpdrSessionAckCounter Counter32, hwIpdrSessionLostCounter Counter32, hwIpdrTemplate INTEGER, hwIpdrCollectorMethod INTEGER, hwIpdrCollectorTime Integer32, hwIpdrSessionAdminStatus INTEGER, hwIpdrSessionRowStatus RowStatus } hwIpdrSessionId OBJECT-TYPE SYNTAX Unsigned32 (4294967295 | 1..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION " Session ID. " ::= { hwIpdrSessionEntry 1 } hwIpdrSessionName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..20)) MAX-ACCESS read-write STATUS current DESCRIPTION " Session name. " ::= { hwIpdrSessionEntry 2 } hwIpdrSessionDesc OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..64)) MAX-ACCESS read-write STATUS current DESCRIPTION " Session description. " ::= { hwIpdrSessionEntry 3 } hwIpdrSessionTransCounter OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " Number of packets sent by the session. " ::= { hwIpdrSessionEntry 4 } hwIpdrSessionAckCounter OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " Number of packets responded by the session. " ::= { hwIpdrSessionEntry 5 } hwIpdrSessionLostCounter OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " Number of packets that are lost because they are not acknowledged by the collector. " ::= { hwIpdrSessionEntry 6 } hwIpdrTemplate OBJECT-TYPE SYNTAX INTEGER { templateUnconfiged(-1), samisType1(1), samisType2(2), diaglogType(3), diaglogEventType(4), diaglogDetailType(5), spectrumMeasurement(6), cmRegStatus(7), cmUsStats(8), topology(9), cpeType(10), usUtil(11), dsUtil(12), serviceFlow(13) } MAX-ACCESS read-write STATUS current DESCRIPTION " The type of the template. Options: 1.templateUnconfiged(-1) - Template id is not configured. 2.samisType1(1) - DOCSIS-SAMIS-TYPE-1 is an IPDR Service Definition schema defining the Subscriber Account Management (SAMIS) Type 1 IPDR data record which references the imported global elements. SAMIS-TYPE-1 is based on the inclusive streaming model where all fields are included in each streamed record. 3.samisType2(2) - DOCSIS-SAMIS-TYPE-2 is an IPDR Service Definition schema defining the Subscriber Account Management (SAMIS) Type 2 IPDR data record which references the imported global elements. SAMIS-TYPE-2 is based on the optimized streaming model where only updated fields are included in each streamed record. 4.diaglogType(3) - DOCSIS-DIAG-LOG-TYPE is an IPDR Service Definition schema defining the CMTS Diagnostic Log Type IPDR data record which references the imported global elements. 5.diaglogEventType(4) - DOCSIS-DIAG-LOG-EVENT-TYPE is an IPDR Service Definition schema defining the CMTS Diagnostic Log Event Type IPDR data record which references the imported global elements. 6.diaglogDetailType(5) - DOCSIS-DIAG-LOG-DETAIL-TYPE is an IPDR Service Definition schema defining the CMTS Diagnostic Log Detail Type IPDR data record which references the imported global elements. 7.spectrumMeasurement(6) - DOCSIS-SPECTRUM-MEASUREMENT-TYPE is an IPDR Service Definition schema defining the Enhanced Signal Quality Monitoring Spectrum Measurement Type IPDR data record which references the imported global elements. 8.cmRegStatus(7) - DOCSIS-CMTS-CM-REG-STATUS is an IPDR Service Definition Schema that defines the Registration status of the CM as perceived by the CMTS. 9.cmUsStats(8) - DOCSIS-CMTS-CM-US-STATS is an IPDR Service Definition Schema that defines the Upstream Channel statistics. This definition supports multiple upstream channels. 10.topology(9) - DOCSIS-CMTS-TOPOLOGY-TYPE is an IPDR Service Definition Schema that defines the RF topology information that shows the connectivities of downstream and upstream channels to the fiber nodes within the CMTS. 11.cpeType(10) - DOCSIS-CPE-TYPE is an IPDR Service Definition schema defining the Customer Premise Equipment (CPE) Type IPDR data record which references the imported global elements. 12.usUtil(11) - DOCSIS-CMTS-US-UTIL-STATS-TYPE is an IPDR Service Definition Schema that defines upstream utilization statistics for a specified upstream logical channel interface for the specified CMTS. 13.dsUtil(12) - DOCSIS-CMTS-DS-UTIL-STATS-TYPE is an IPDR Service Definition Schema that defines downstream utilization statistics for a specified downstream interface for the specified CMTS. 14.serviceFlow(13) - DOCSIS-CMTS-CM-SERVICE-FLOW-TYPE " ::= { hwIpdrSessionEntry 7 } hwIpdrCollectorMethod OBJECT-TYPE SYNTAX INTEGER { collectMethodUnconfiged(-1), adHoc(1), event(2), timeInterval(3) } MAX-ACCESS read-write STATUS current DESCRIPTION " The type of collect mode. Options: 1.collectMethodUnconfiged(-1) - Collect method is not configured. 2.adHoc(1) - Ad-hoc Session: Per request (from a Collector), the Exporter creates a session and closes it when either the data is streamed or a closing command is generated.Once Collector starts flow CMTS Exporter SHOULD start session, stream data and stop session. The CMTS Exporter can optionally support additional management interface triggers for starting the session. 3.event(2) - Event Based Session: It consists of an open-ended session or a Time Interval Session. During the time the IPDR session is open the exporter can stream records at any time, thus the name Event Based Session. In the case of an open-ended session, the collector could create documents based on size, number of records received, timestamps (to simulate Time Interval Sessions), or never creates an IPDRDoc. 4.timeInterval(3) - Time Interval Session: The exporter follows a schedule based session to stream data on a periodic time interval. The collector creates the IPDRDoc within those demarcation points. Note that the Time Interval Session is managed by the exporter as being delimited by session start/stop messages. A collector initiated flow operation is possible as well; the collector issues Flow Stop messages to stop the exporter streaming. Finally, it is possible to control the Time Interval Session at either end-points. A Time Interval Session may close immediately after the exporter streams the records or remain open until the end of the time interval in which case, the exporter stops the session and starts a new session for the next time interval. " ::= { hwIpdrSessionEntry 8 } hwIpdrCollectorTime OBJECT-TYPE SYNTAX Integer32 (0|15..1440) UNITS "minutes" MAX-ACCESS read-write STATUS current DESCRIPTION " Reporting interval. " ::= { hwIpdrSessionEntry 9 } hwIpdrSessionAdminStatus OBJECT-TYPE SYNTAX INTEGER { deactivate(1), activate(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " Session state. Options: 1.deactivate(1) - Session deactivate. 2.activate(2) - Session activate. " ::= { hwIpdrSessionEntry 10 } hwIpdrSessionRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION " This object is used to create, delete, and modify records in the table. In a query, an leaf is displayed as active if a queried record is found. " ::= { hwIpdrSessionEntry 11 } hwIpdrCollectorTable OBJECT-TYPE SYNTAX SEQUENCE OF HwIpdrCollectorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " A collector table is used to create a session. The index of this table is hwIpdrCollectorName. " ::= { hwIpdr 2 } hwIpdrCollectorEntry OBJECT-TYPE SYNTAX HwIpdrCollectorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " A collector table is used to create a session. The index of this entry is hwIpdrCollectorName. " INDEX { IMPLIED hwIpdrCollectorName } ::= { hwIpdrCollectorTable 1 } HwIpdrCollectorEntry ::= SEQUENCE { hwIpdrCollectorName OCTET STRING, hwIpdrCollectorIpAddrType InetAddressType, hwIpdrCollectorIpAddress InetAddress, hwIpdrCollectorPort Unsigned32, hwIpdrCollectorRowstatus RowStatus, hwIpdrCollectorVpnInstance OCTET STRING } hwIpdrCollectorName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..20)) MAX-ACCESS not-accessible STATUS current DESCRIPTION " Collector name. " ::= { hwIpdrCollectorEntry 1 } hwIpdrCollectorIpAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-write STATUS current DESCRIPTION " Type of the collector's ip address. " ::= { hwIpdrCollectorEntry 2 } hwIpdrCollectorIpAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION " Collector ip address. " ::= { hwIpdrCollectorEntry 3 } hwIpdrCollectorPort OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION " Collector port. " ::= { hwIpdrCollectorEntry 4 } hwIpdrCollectorRowstatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION " This object is used to create, delete, and modify records in the table. In a query, an leaf is displayed as active if a queried record is found. " ::= { hwIpdrCollectorEntry 5 } hwIpdrCollectorVpnInstance OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..31)) MAX-ACCESS read-write STATUS current DESCRIPTION " This object is used to establish a connection to the collector in a VPN network, and this object can only be used in passive mode. " ::= { hwIpdrCollectorEntry 6 } hwIpdrSessionAndCollectorTable OBJECT-TYPE SYNTAX SEQUENCE OF HwIpdrSessionAndCollectorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " The session and collector relationship table is used to create the association between the session and the collector. The indexes of this table are hwIpdrSessionId and hwIpdrCollectorName. " ::= { hwIpdr 3 } hwIpdrSessionAndCollectorEntry OBJECT-TYPE SYNTAX HwIpdrSessionAndCollectorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " The session and collector relationship table is used to create the association between the session and the collector. The indexes of this entry are hwIpdrSessionId and hwIpdrCollectorName. " INDEX { hwIpdrSessionId, IMPLIED hwIpdrCollectorName } ::= { hwIpdrSessionAndCollectorTable 1 } HwIpdrSessionAndCollectorEntry ::= SEQUENCE { hwIpdrCollectorPriority Integer32, hwIpdrSessionAndCollectorRowstatus RowStatus } hwIpdrCollectorPriority OBJECT-TYPE SYNTAX Integer32 (1..10) MAX-ACCESS read-write STATUS current DESCRIPTION " Collector's priority, a smaller value indicates a higher priority. " ::= { hwIpdrSessionAndCollectorEntry 1 } hwIpdrSessionAndCollectorRowstatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION " This object is used to create, delete, and modify records in the table. In a query, an leaf is displayed as active if a queried record is found. " ::= { hwIpdrSessionAndCollectorEntry 2 } hwIpdrSystemPara OBJECT IDENTIFIER ::= { hwIpdr 4 } hwIpdrKeepAliveInterval OBJECT-TYPE SYNTAX Integer32 (5..300) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION " IPDR keepalive time. Default: 300 " ::= { hwIpdrSystemPara 1 } hwIpdrAckTimeout OBJECT-TYPE SYNTAX Integer32 (5..60) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION " IPDR acknowledgement timeout time. Default: 60 " ::= { hwIpdrSystemPara 2 } hwIpdrMaxUnackRecords OBJECT-TYPE SYNTAX Integer32 (5..200) MAX-ACCESS read-write STATUS current DESCRIPTION " Maximum number of records of unacknowledged IPDR messages. Default: 200 " ::= { hwIpdrSystemPara 3 } hwIpdrCollectorType OBJECT-TYPE SYNTAX INTEGER { active (1), passive (2) } MAX-ACCESS read-write STATUS current DESCRIPTION " Ipdr collector connection type. Default: active Options: 1.active(1) - IPDR Collector initiating a connection. 2.passive(2) - IPDR Collector receiving a connection. " ::= { hwIpdrSystemPara 4 } hwIpdrOntSwitch OBJECT-TYPE SYNTAX INTEGER { disable (1), enable (2) } MAX-ACCESS read-write STATUS current DESCRIPTION " Ipdr ont switch type. Default: disable Options: 1.disable(1) - IPDR Ont switch disable. 2.enable(2) - IPDR Ont switch enable. " ::= { hwIpdrSystemPara 5 } END