-- ================================================================= -- Copyright (C) 2017 by HUAWEI TECHNOLOGIES. All rights reserved -- -- Description: ITU-T G.8032 huawei mib define -- Reference: ITU-T G.8032/Y.1344 -- Version: V2.15 -- History: -- ,<2011.07.05>, -- ================================================================= HUAWEI-ERPS-MIB DEFINITIONS ::= BEGIN IMPORTS hwDatacomm FROM HUAWEI-MIB EnabledStatus FROM P-BRIDGE-MIB VlanId FROM Q-BRIDGE-MIB OBJECT-GROUP, NOTIFICATION-GROUP, MODULE-COMPLIANCE FROM SNMPv2-CONF InterfaceIndex, ifName FROM IF-MIB Integer32, Unsigned32, OBJECT-TYPE, MODULE-IDENTITY, OBJECT-IDENTITY, NOTIFICATION-TYPE,TimeTicks,Counter32 FROM SNMPv2-SMI RowStatus,DisplayString FROM SNMPv2-TC; -- 1.3.6.1.4.1.2011.5.25.256 hwErpsMIB MODULE-IDENTITY LAST-UPDATED "201711060001Z" ORGANIZATION "Huawei Technologies Co.,Ltd." CONTACT-INFO "Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China Website: http://www.huawei.com Email: support@huawei.com " DESCRIPTION "The private mib file includes the general extent information of the device.hwDatacomm(25).hwErpsMIB. " REVISION "201711060001Z" DESCRIPTION "delete constrictions of table" REVISION "201711010001Z" DESCRIPTION "change English description of nodes" REVISION "201610280000Z" DESCRIPTION "fix the errors points of hwErpsNotifications." REVISION "201308310000Z" DESCRIPTION "fix the errors checked by a tool." REVISION "201306280001Z" DESCRIPTION "Add new node hwErpsNotifications" ::= { hwDatacomm 256 } -- Node definitions -- -- 1.3.6.1.4.1.2011.5.25.256.1 hwErpsObjects OBJECT IDENTIFIER ::= { hwErpsMIB 1 } -- 1.3.6.1.4.1.2011.5.25.256.1.1 hwErpsGlobalResetRapsPktCnt OBJECT-TYPE SYNTAX INTEGER { clear(1), unused(65535) } MAX-ACCESS read-write STATUS current DESCRIPTION "Reset the RAPS packets counter of all running ERPS ports. The value is unused(65535) when it is read. And it must be clear(1) when it is set." ::= { hwErpsObjects 1 } -- ring config table -- 1.3.6.1.4.1.2011.5.25.256.1.2 hwErpsRingConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF HwErpsRingConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table describes the ERPS ring configurations." ::= { hwErpsObjects 2 } -- 1.3.6.1.4.1.2011.5.25.256.1.2.1 hwErpsRingConfigEntry OBJECT-TYPE SYNTAX HwErpsRingConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table includes the configurtion of ERPS rings. The index of the table is ERPS ring id." INDEX { hwConfigRingId } ::= { hwErpsRingConfigTable 1 } HwErpsRingConfigEntry ::= SEQUENCE { hwConfigRingId Integer32, hwConfigRingRowStatus RowStatus, hwConfigDescription DisplayString, hwConfigControlVlanId Integer32, hwConfigProtectedInstanceList OCTET STRING, hwConfigWtrTimerSettingValue Integer32, hwConfigGuardTimerSettingValue Integer32, hwConfigHoldoffTimerSettingValue Integer32, hwConfigResetRapsPktCnt INTEGER, hwConfigRapsMel Integer32, hwConfigVersion INTEGER, hwConfigRevertiveMode INTEGER, hwConfigRingRole INTEGER, hwConfigRapsChannelMode INTEGER, hwConfigTcNotifyErpsRing OCTET STRING, hwConfigTcProtectionInterval Integer32, hwConfigTcProtectionThreshold Integer32, hwConfigProtectionSwitch INTEGER } -- 1.3.6.1.4.1.2011.5.25.256.1.2.1.1 hwConfigRingId OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object indicates the ring ID." ::= { hwErpsRingConfigEntry 1 } -- 1.3.6.1.4.1.2011.5.25.256.1.2.1.2 hwConfigRingRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Operation of CreateAndGo can be used to create a new ERPS ring, and operation of Destroy be used to destroy an existent ERPS ring." ::= { hwErpsRingConfigEntry 2 } -- 1.3.6.1.4.1.2011.5.25.256.1.2.1.3 hwConfigDescription OBJECT-TYPE SYNTAX DisplayString (SIZE (0..80)) MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the ring description. The description can contain a maximum of 80 ASCII characters." ::= { hwErpsRingConfigEntry 3 } -- 1.3.6.1.4.1.2011.5.25.256.1.2.1.4 hwConfigControlVlanId OBJECT-TYPE SYNTAX Integer32 (0 | 1..4094) MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the control VLAN information of the ring. If the value of this object is set to 0, the configuration is deleted." DEFVAL { 0 } ::= { hwErpsRingConfigEntry 4 } -- 1.3.6.1.4.1.2011.5.25.256.1.2.1.5 hwConfigProtectedInstanceList OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..512)) MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the protection instance ID of the ring." ::= { hwErpsRingConfigEntry 5 } -- 1.3.6.1.4.1.2011.5.25.256.1.2.1.6 hwConfigWtrTimerSettingValue OBJECT-TYPE SYNTAX Integer32 (1..12) UNITS "minutes" MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the ring switchover protection time." DEFVAL { 5 } ::= { hwErpsRingConfigEntry 6 } -- 1.3.6.1.4.1.2011.5.25.256.1.2.1.7 hwConfigGuardTimerSettingValue OBJECT-TYPE SYNTAX Integer32 (1..200) UNITS "centiseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the interval for discarding RAPS packets." ::= { hwErpsRingConfigEntry 7 } -- 1.3.6.1.4.1.2011.5.25.256.1.2.1.8 hwConfigHoldoffTimerSettingValue OBJECT-TYPE SYNTAX Integer32 (0..100) UNITS "deciseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the interval for keeping the interface status." DEFVAL { 0 } ::= { hwErpsRingConfigEntry 8 } -- 1.3.6.1.4.1.2011.5.25.256.1.2.1.9 hwConfigResetRapsPktCnt OBJECT-TYPE SYNTAX INTEGER { clear(1), unused(65535) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates resetting packet statistics on an interface. When the read operation is performed, the system returns 65535 (not used). When the set operation is performed, the value of this object must be set to 1 (cleared)." ::= { hwErpsRingConfigEntry 9 } -- 1.3.6.1.4.1.2011.5.25.256.1.2.1.10 hwConfigRapsMel OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the maintenance entity level of the ring, providing a channel to read the ring RAPS information." DEFVAL { 7 } ::= { hwErpsRingConfigEntry 10 } -- 1.3.6.1.4.1.2011.5.25.256.1.2.1.11 hwConfigVersion OBJECT-TYPE SYNTAX INTEGER { v1(1), v2(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the version information of the ring. The default version is V1." DEFVAL { 1 } ::= { hwErpsRingConfigEntry 11 } -- 1.3.6.1.4.1.2011.5.25.256.1.2.1.12 hwConfigRevertiveMode OBJECT-TYPE SYNTAX INTEGER { revertive(1), nonRevertive(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the ring's switchback mode. The default mode is revertive switching." DEFVAL { 1 } ::= { hwErpsRingConfigEntry 12 } -- 1.3.6.1.4.1.2011.5.25.256.1.2.1.13 hwConfigRingRole OBJECT-TYPE SYNTAX INTEGER { majorRing(1), subRing(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates that the ring is configured as a sub-ring." DEFVAL { 1 } ::= { hwErpsRingConfigEntry 13 } -- 1.3.6.1.4.1.2011.5.25.256.1.2.1.14 hwConfigRapsChannelMode OBJECT-TYPE SYNTAX INTEGER { virtualChannel(1), nonVirtualChannel(2), unused(65535) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the sub-ring channel mode. By default, a non-virtual channel is used. If the ring is the primary ring, the system returns 65535 (not used) after the read operation is performed." ::= { hwErpsRingConfigEntry 14 } -- 1.3.6.1.4.1.2011.5.25.256.1.2.1.15 hwConfigTcNotifyErpsRing OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the list of rings to be informed when the topology changes." ::= { hwErpsRingConfigEntry 15 } -- 1.3.6.1.4.1.2011.5.25.256.1.2.1.16 hwConfigTcProtectionInterval OBJECT-TYPE SYNTAX Integer32 (1..600) MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the notification interval when the ring topology changes. The default value is 2s." DEFVAL { 2 } ::= { hwErpsRingConfigEntry 16 } -- 1.3.6.1.4.1.2011.5.25.256.1.2.1.17 hwConfigTcProtectionThreshold OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the notification threshold when the ring topology changes. The default value is 3." DEFVAL { 3 } ::= { hwErpsRingConfigEntry 17 } -- 1.3.6.1.4.1.2011.5.25.256.1.2.1.18 hwConfigProtectionSwitch OBJECT-TYPE SYNTAX INTEGER { clear(1), idle(65535) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates canceling the ring configuration. The value is 65535 by default. When the ring configuration is canceled, the value is 1 (cleared)." ::= { hwErpsRingConfigEntry 18 } --ring status table -- 1.3.6.1.4.1.2011.5.25.256.1.3 hwErpsRingStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF HwErpsRingStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table describes the ERPS ring status." ::= { hwErpsObjects 3 } -- 1.3.6.1.4.1.2011.5.25.256.1.3.1 hwErpsRingStatusEntry OBJECT-TYPE SYNTAX HwErpsRingStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table includes the status of ERPS rings. The index of the table is ERPS ring id." INDEX { hwConfigRingId } ::= { hwErpsRingStatusTable 1 } HwErpsRingStatusEntry ::= SEQUENCE { hwStatusWtrTimerRunningValue Integer32, hwStatusGuardTimerRunningValue Integer32, hwStatusHoldoffTimerRunningValue Integer32, hwStatusMachineState INTEGER, hwStatusTopoLastChangeTime TimeTicks, hwStatusWtbTimerRunningValue Integer32 } -- 1.3.6.1.4.1.2011.5.25.256.1.2.1.1 hwStatusWtrTimerRunningValue OBJECT-TYPE SYNTAX Integer32 (0..720) UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the time that the ring WTR timer is running." ::= { hwErpsRingStatusEntry 1 } -- 1.3.6.1.4.1.2011.5.25.256.1.2.1.2 hwStatusGuardTimerRunningValue OBJECT-TYPE SYNTAX Integer32 (0..200) UNITS "centiseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the time that the ring protection timer is running." ::= { hwErpsRingStatusEntry 2 } -- 1.3.6.1.4.1.2011.5.25.256.1.2.1.3 hwStatusHoldoffTimerRunningValue OBJECT-TYPE SYNTAX Integer32 (0..100) UNITS "deciseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the time that the ring delay timer is running." ::= { hwErpsRingStatusEntry 3 } -- 1.3.6.1.4.1.2011.5.25.256.1.2.1.4 hwStatusMachineState OBJECT-TYPE SYNTAX INTEGER { idle(1), protection(2), manualSwitch(3), forcedSwitch(4), pending(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the ring state machine status. 1: default state. 2: protection state. 3: manual switching state. 4: forced switching state. 5: waiting state." ::= { hwErpsRingStatusEntry 4 } -- 1.3.6.1.4.1.2011.5.25.256.1.2.1.5 hwStatusTopoLastChangeTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the time when the ring topology changed for the last time." ::= { hwErpsRingStatusEntry 5 } -- 1.3.6.1.4.1.2011.5.25.256.1.2.1.6 hwStatusWtbTimerRunningValue OBJECT-TYPE SYNTAX Integer32 (0..700) UNITS "centiseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the running time after which the ring is blocked." ::= { hwErpsRingStatusEntry 6 } --port config table --1.3.6.1.4.1.2011.5.25.256.1.3 hwErpsPortConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF HwErpsPortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table describes interface configurations on an ERPS ring." ::= { hwErpsObjects 4 } -- 1.3.6.1.4.1.2011.5.25.256.1.4.1 hwErpsPortConfigEntry OBJECT-TYPE SYNTAX HwErpsPortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table includes the configuration of ERPS ports. The index of the table is ERPS ring identifier, port type, port identifier1, port identifier2, port identifier3, port identifier4. If it is an ethernet port including fast ethernet/gigabit ethernet/eth-trunk, the port type is 1, the port identifier1 is the IfIndex of the ethernet port. the other port identifier is for extension and not used currently, should be set 0." INDEX { hwConfigRingId, hwConfigPortType, hwConfigPortId1, hwConfigPortId2, hwConfigPortId3, hwConfigPortId4 } ::= { hwErpsPortConfigTable 1 } HwErpsPortConfigEntry ::= SEQUENCE { hwConfigPortType Unsigned32, hwConfigPortId1 Unsigned32, hwConfigPortId2 Unsigned32, hwConfigPortId3 Unsigned32, hwConfigPortId4 Unsigned32, hwConfigPortRowStatus RowStatus, hwConfigPortConfigRole Integer32, hwConfigPortProtectionSwitch INTEGER } -- 1.3.6.1.4.1.2011.5.25.256.1.4.1.1 hwConfigPortType OBJECT-TYPE SYNTAX Unsigned32 (1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the interface type on the ring. Currently, ERPS supports only Ethernet interfaces. The value is fixed at 1." ::= { hwErpsPortConfigEntry 1 } -- 1.3.6.1.4.1.2011.5.25.256.1.4.1.2 hwConfigPortId1 OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the interface identified by Id1 on the ring. When the hwConfigPortType value is 1, this object indicates the interface index on the ring." ::= { hwErpsPortConfigEntry 2 } -- 1.3.6.1.4.1.2011.5.25.256.1.4.1.3 hwConfigPortId2 OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the interface identified by Id2. This field is used for extension and is not used currently. The value should be set to 0." ::= { hwErpsPortConfigEntry 3 } -- 1.3.6.1.4.1.2011.5.25.256.1.4.1.4 hwConfigPortId3 OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the interface identified by Id3. This field is used for extension and is not used currently. The value should be set to 0." ::= { hwErpsPortConfigEntry 4 } -- 1.3.6.1.4.1.2011.5.25.256.1.4.1.5 hwConfigPortId4 OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the interface identified by Id4 on the ring. This field is used for extension and is not used currently. The value should be set to 0." ::= { hwErpsPortConfigEntry 5 } -- 1.3.6.1.4.1.2011.5.25.256.1.4.1.6 hwConfigPortRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Operation of CreateAndGo can be used to have a port join the ERPS ring. and operation of Destroy be used to have a port leave the ERPS ring." ::= { hwErpsPortConfigEntry 6 } -- 1.3.6.1.4.1.2011.5.25.256.1.4.1.7 hwConfigPortConfigRole OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the configured role of the ring interface. 0x10: common interface. 0x21: rplOwner interface. 0x22: rplNeighbour interface." ::= { hwErpsPortConfigEntry 7 } -- 1.3.6.1.4.1.2011.5.25.256.1.4.1.8 hwConfigPortProtectionSwitch OBJECT-TYPE SYNTAX INTEGER { forcedSwitch(1), manualSwitch(2), idle(65535) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the protection switching mode, including forced switching and manual switching. If the mode is not set, the default value 65535 is returned." ::= { hwErpsPortConfigEntry 8 } --port status table --1.3.6.1.4.1.2011.5.25.256.1.5 hwErpsPortStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF HwErpsPortStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table describes the ERPS ring interface status." ::= { hwErpsObjects 5 } -- 1.3.6.1.4.1.2011.5.25.256.1.5.1 hwErpsPortStatusEntry OBJECT-TYPE SYNTAX HwErpsPortStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table includes the status of ERPS ports. The index of the table is ERPS ring identifier, port type, port identifier1, port identifier2, port identifier3, port identifier4. If it is an ethernet port including fast ethernet/gigabit ethernet/eth-trunk, the port type is 1, the port identifier1 is the IfIndex of the ethernet port. the other port identifier is for extension and not used currently, should be set 0." INDEX { hwConfigRingId, hwConfigPortType, hwConfigPortId1, hwConfigPortId2, hwConfigPortId3, hwConfigPortId4 } ::= { hwErpsPortStatusTable 1 } HwErpsPortStatusEntry ::= SEQUENCE { hwPortStatusActiveRole Integer32, hwPortStatusSignalStatus INTEGER, hwPortStatusFwdStatus INTEGER } -- 1.3.6.1.4.1.2011.5.25.256.1.5.1.1 hwPortStatusActiveRole OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the member role of the ring interface. 0x10: common interface. 0x21: rplOwner interface. 0x22: rplNeighbour interface." ::= { hwErpsPortStatusEntry 1 } -- 1.3.6.1.4.1.2011.5.25.256.1.5.1.7 hwPortStatusSignalStatus OBJECT-TYPE SYNTAX INTEGER { failed(1), nonFailed(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the signal status of the ring interface. 1: failed. 2: successful." ::= { hwErpsPortStatusEntry 2 } -- 1.3.6.1.4.1.2011.5.25.256.1.5.1.8 hwPortStatusFwdStatus OBJECT-TYPE SYNTAX INTEGER { discarding(1), forwarding(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the forwarding status of the ring interface. 1: blocked. 2: forwarding." ::= { hwErpsPortStatusEntry 3 } --port Statistics table --1.3.6.1.4.1.2011.5.25.256.1.6 hwErpsPortStatisticsTable OBJECT-TYPE SYNTAX SEQUENCE OF HwErpsPortStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table describes the ERPS ring interface statistics." ::= { hwErpsObjects 6 } -- 1.3.6.1.4.1.2011.5.25.256.1.6.1 hwErpsPortStatisticsEntry OBJECT-TYPE SYNTAX HwErpsPortStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table includes the Statistics of ERPS ports. The index of the table is ERPS ring identifier, port type, port identifier1, port identifier2, port identifier3, port identifier4. If it is an ethernet port including fast ethernet/gigabit ethernet/eth-trunk, the port type is 1, the port identifier1 is the IfIndex of the ethernet port. the other port identifier is for extension and not used currently, should be set 0." INDEX { hwConfigRingId, hwConfigPortType, hwConfigPortId1, hwConfigPortId2, hwConfigPortId3, hwConfigPortId4} ::= { hwErpsPortStatisticsTable 1 } HwErpsPortStatisticsEntry ::= SEQUENCE { hwRxRapsSfPktCnt Counter32, hwTxRapsSfPktCnt Counter32, hwRxRapsNrPktCnt Counter32, hwTxRapsNrPktCnt Counter32, hwRxRapsNrRbPktCnt Counter32, hwTxRapsNrRbPktCnt Counter32, hwRxRapsFsPktCnt Counter32, hwTxRapsFsPktCnt Counter32, hwRxRapsMsPktCnt Counter32, hwTxRapsMsPktCnt Counter32, hwRxRapsEventPktCnt Counter32, hwTxRapsEventPktCnt Counter32 } -- 1.3.6.1.4.1.2011.5.25.256.1.6.1.1 hwRxRapsSfPktCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of received RAPS SF packets." ::= { hwErpsPortStatisticsEntry 1 } -- 1.3.6.1.4.1.2011.5.25.256.1.3.1.2 hwTxRapsSfPktCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of sent RAPS SF packets." ::= { hwErpsPortStatisticsEntry 2 } -- 1.3.6.1.4.1.2011.5.25.256.1.3.1.3 hwRxRapsNrPktCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of received RAPS NR packets." ::= { hwErpsPortStatisticsEntry 3 } -- 1.3.6.1.4.1.2011.5.25.256.1.3.1.4 hwTxRapsNrPktCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of sent RAPS NR packets." ::= { hwErpsPortStatisticsEntry 4 } -- 1.3.6.1.4.1.2011.5.25.256.1.3.1.5 hwRxRapsNrRbPktCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of received RAPS NRRB packets." ::= { hwErpsPortStatisticsEntry 5 } -- 1.3.6.1.4.1.2011.5.25.256.1.3.1.6 hwTxRapsNrRbPktCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of sent RAPS NRRB packets." ::= { hwErpsPortStatisticsEntry 6 } -- 1.3.6.1.4.1.2011.5.25.256.1.3.1.7 hwRxRapsFsPktCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of received RAPS FS packets." ::= { hwErpsPortStatisticsEntry 7 } -- 1.3.6.1.4.1.2011.5.25.256.1.3.1.8 hwTxRapsFsPktCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of sent RAPS FS packets." ::= { hwErpsPortStatisticsEntry 8 } -- 1.3.6.1.4.1.2011.5.25.256.1.3.1.9 hwRxRapsMsPktCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of received RAPS MS packets." ::= { hwErpsPortStatisticsEntry 9 } -- 1.3.6.1.4.1.2011.5.25.256.1.3.1.10 hwTxRapsMsPktCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of sent RAPS MS packets." ::= { hwErpsPortStatisticsEntry 10 } -- 1.3.6.1.4.1.2011.5.25.256.1.3.1.11 hwRxRapsEventPktCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of received RAPS Event packets." ::= { hwErpsPortStatisticsEntry 11 } -- 1.3.6.1.4.1.2011.5.25.256.1.3.1.12 hwTxRapsEventPktCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of sent RAPS Event packets." ::= { hwErpsPortStatisticsEntry 12 } --ERPS port tracking information table --1.3.6.1.4.1.2011.5.25.256.1.7 hwErpsPortTrackTable OBJECT-TYPE SYNTAX SEQUENCE OF HwErpsPortTrackEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table includes the information of ERPS ports track." ::= { hwErpsObjects 7 } -- 1.3.6.1.4.1.2011.5.25.256.1.7.1 hwErpsPortTrackEntry OBJECT-TYPE SYNTAX HwErpsPortTrackEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table includes the information of ERPS ports track. The index of the table is ERPS ring identifier, port type, port identifier1, port identifier2, port identifier3, port identifier4, protocol type. If it is an ethernet port including fast ethernet/gigabit ethernet/eth-trunk, the port type is 1, the port identifier1 is the IfIndex of the ethernet port. the other port identifier is for extension and not used currently, should be set 0." INDEX { hwConfigRingId, hwConfigPortType, hwConfigPortId1, hwConfigPortId2, hwConfigPortId3, hwConfigPortId4, hwErpsPortTrackProtocolType} ::= { hwErpsPortTrackTable 1 } HwErpsPortTrackEntry ::= SEQUENCE { hwErpsPortTrackProtocolType INTEGER, hwErpsPortTrackRowStatus RowStatus, hwErpsPortTrackCfmMdName OCTET STRING, hwErpsPortTrackCfmMaName OCTET STRING, hwErpsPortTrackCfmMepId Integer32, hwErpsPortTrackCfmRmepId Integer32 } -- 1.3.6.1.4.1.2011.5.25.256.1.7.1.1 hwErpsPortTrackProtocolType OBJECT-TYPE SYNTAX INTEGER { cfm(1) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The protocol type that ERPS port tracks. Currently ERPS port just supports tracking CFM." ::= { hwErpsPortTrackEntry 1 } -- 1.3.6.1.4.1.2011.5.25.256.1.7.1.2 hwErpsPortTrackRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The CreateAndGo operation enables an ERPS port to track the protocol. The Destroy operation disables an ERPS port from tracking the protocol." ::= { hwErpsPortTrackEntry 2 } -- 1.3.6.1.4.1.2011.5.25.256.1.7.1.3 hwErpsPortTrackCfmMdName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..43)) MAX-ACCESS read-create STATUS current DESCRIPTION "The name of maintenance domain." ::= { hwErpsPortTrackEntry 3 } -- 1.3.6.1.4.1.2011.5.25.256.1.7.1.4 hwErpsPortTrackCfmMaName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..43)) MAX-ACCESS read-create STATUS current DESCRIPTION "The name of maintenance association." ::= { hwErpsPortTrackEntry 4 } -- 1.3.6.1.4.1.2011.5.25.256.1.7.1.5 hwErpsPortTrackCfmMepId OBJECT-TYPE SYNTAX Integer32 (1..8191) MAX-ACCESS read-create STATUS current DESCRIPTION "MEP ID." ::= { hwErpsPortTrackEntry 5 } -- 1.3.6.1.4.1.2011.5.25.256.1.7.1.6 hwErpsPortTrackCfmRmepId OBJECT-TYPE SYNTAX Integer32 (1..8191) MAX-ACCESS read-create STATUS current DESCRIPTION "Remote MEP ID." ::= { hwErpsPortTrackEntry 6 } -- 1.3.6.1.4.1.2011.5.25.256.4 hwErpsNotifications OBJECT IDENTIFIER ::= { hwErpsMIB 4 } -- 1.3.6.1.4.1.2011.5.25.256.4.1 hwErpsFwStateForwarding NOTIFICATION-TYPE OBJECTS { hwConfigRingId , ifName } STATUS current DESCRIPTION "This object indicates that an alarm is generated when an interface added to the ERPS ring enters the Forwarding state." ::= { hwErpsNotifications 1 } -- 1.3.6.1.4.1.2011.5.25.256.4.2 hwErpsFwStateDiscarding NOTIFICATION-TYPE OBJECTS { hwConfigRingId , ifName } STATUS current DESCRIPTION "This object indicates that an alarm is generated when an interface added to the ERPS ring enters the Discarding state." ::= { hwErpsNotifications 2 } -- 1.3.6.1.4.1.2011.5.25.256.2 hwErpsGroups OBJECT IDENTIFIER ::= { hwErpsMIB 2 } -- 1.3.6.1.4.1.2011.5.25.256.2.1 hwErpsGlobalInfoGroup OBJECT-GROUP OBJECTS { hwErpsGlobalResetRapsPktCnt } STATUS current DESCRIPTION "The group of global information." ::= { hwErpsGroups 1 } -- 1.3.6.1.4.1.2011.5.25.256.2.2 hwErpsRingConfigInfoGroup OBJECT-GROUP OBJECTS { hwConfigRingRowStatus, hwConfigDescription, hwConfigControlVlanId, hwConfigProtectedInstanceList, hwConfigWtrTimerSettingValue, hwConfigGuardTimerSettingValue, hwConfigHoldoffTimerSettingValue, hwConfigResetRapsPktCnt, hwConfigRapsMel, hwConfigVersion, hwConfigRevertiveMode, hwConfigRingRole, hwConfigRapsChannelMode, hwConfigTcNotifyErpsRing, hwConfigTcProtectionInterval, hwConfigTcProtectionThreshold, hwConfigProtectionSwitch } STATUS current DESCRIPTION "The group of ring configuration." ::= { hwErpsGroups 2 } -- 1.3.6.1.4.1.2011.5.25.256.2.3 hwErpsRingStatusInfoGroup OBJECT-GROUP OBJECTS { hwStatusWtrTimerRunningValue, hwStatusGuardTimerRunningValue, hwStatusHoldoffTimerRunningValue, hwStatusMachineState, hwStatusTopoLastChangeTime, hwStatusWtbTimerRunningValue } STATUS current DESCRIPTION "The group of ring status." ::= { hwErpsGroups 3 } -- 1.3.6.1.4.1.2011.5.25.256.2.4 hwErpsPortConfigInfoGroup OBJECT-GROUP OBJECTS { hwConfigPortRowStatus, hwConfigPortConfigRole, hwConfigPortProtectionSwitch } STATUS current DESCRIPTION "The group of port configuration." ::= { hwErpsGroups 4 } -- 1.3.6.1.4.1.2011.5.25.256.2.5 hwErpsPortStatusInfoGroup OBJECT-GROUP OBJECTS { hwPortStatusActiveRole, hwPortStatusSignalStatus, hwPortStatusFwdStatus } STATUS current DESCRIPTION "The group of port status." ::= { hwErpsGroups 5 } -- 1.3.6.1.4.1.2011.5.25.256.2.6 hwErpsPortStatisticsInfoGroup OBJECT-GROUP OBJECTS { hwRxRapsSfPktCnt, hwTxRapsSfPktCnt, hwRxRapsNrPktCnt, hwTxRapsNrPktCnt, hwRxRapsNrRbPktCnt, hwTxRapsNrRbPktCnt, hwRxRapsFsPktCnt, hwTxRapsFsPktCnt, hwRxRapsMsPktCnt, hwTxRapsMsPktCnt, hwRxRapsEventPktCnt, hwTxRapsEventPktCnt } STATUS current DESCRIPTION "The group of port information." ::= { hwErpsGroups 6 } -- 1.3.6.1.4.1.2011.5.25.256.2.7 hwErpsPortTrackInfoGroup OBJECT-GROUP OBJECTS { hwErpsPortTrackProtocolType, hwErpsPortTrackRowStatus, hwErpsPortTrackCfmMdName, hwErpsPortTrackCfmMaName, hwErpsPortTrackCfmMepId, hwErpsPortTrackCfmRmepId } STATUS current DESCRIPTION "The group of ERPS port tracking information." ::= { hwErpsGroups 7 } -- 1.3.6.1.4.1.2011.5.25.256.2.8 hwErpsNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { hwErpsFwStateForwarding, hwErpsFwStateDiscarding } STATUS current DESCRIPTION "The notification group." ::= { hwErpsGroups 8 } -- compliance statements hwErpsConformance OBJECT IDENTIFIER ::= { hwErpsMIB 3 } hwErpsCompliances OBJECT IDENTIFIER ::= { hwErpsConformance 1 } hwErpsCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The core compliance statement for all implementations." MODULE -- this module MANDATORY-GROUPS { hwErpsGlobalInfoGroup, hwErpsRingConfigInfoGroup, hwErpsRingStatusInfoGroup, hwErpsPortConfigInfoGroup, hwErpsPortStatusInfoGroup, hwErpsPortStatisticsInfoGroup, hwErpsNotificationGroup } ::= { hwErpsCompliances 1 } END -- -- HUAWEI-ERPS-MIBv2.my --