-- ================================================================= -- Copyright (C) 2018 by HUAWEI TECHNOLOGIES. All rights reserved. -- Description: The MIB is used for defining Huawei's EQAM attribute. -- Reference: None -- Version: V1.37 -- ================================================================= HUAWEI-EQAM-AN-MIB DEFINITIONS ::= BEGIN IMPORTS huaweiUtility FROM HUAWEI-MIB EnabledStatus FROM P-BRIDGE-MIB VlanId FROM Q-BRIDGE-MIB OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF ifIndex, InterfaceIndex, InterfaceIndexOrZero FROM IF-MIB Integer32, Unsigned32, OBJECT-TYPE, MODULE-IDENTITY, OBJECT-IDENTITY, NOTIFICATION-TYPE, TimeTicks, Counter32, Counter64 FROM SNMPv2-SMI RowStatus,DisplayString, TruthValue, TEXTUAL-CONVENTION, DateAndTime FROM SNMPv2-TC ChannelList FROM DOCS-IF3-MIB InetAddressType, InetAddress, InetPortNumber FROM INET-ADDRESS-MIB hwFrameIndex, hwSlotIndex, hwPortIndex FROM HUAWEI-DEVICE-MIB; hwEqamAn MODULE-IDENTITY LAST-UPDATED "201812200000Z" ORGANIZATION "Huawei Technologies Co.,Ltd." CONTACT-INFO "Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China Website: http://www.huawei.com Email: support@huawei.com " DESCRIPTION "The MIB is used for defining Huawei's EQAM attribute. " -- Revision history REVISION "201812200000Z" DESCRIPTION "V1.37, Added hwDocsQamVideoDomainLocalInterfaceLoopbackNumber to hwDocsQamVideoDomainTable. " REVISION "201810250000Z" DESCRIPTION "V1.36, Added value invalid(255) to hwDocsQamScsEisProtocolVersion and hwDocsQamScsEcmgProtocolVersion. Modified the description of hwDocsQamVideoStreamESSrambleStateList. Added hwDocsQamVideoStreamOutputESSrambleStateList to hwDocsQamVideoStreamTable. " REVISION "201809190000Z" DESCRIPTION "V1.35, Added value ver2(3) to hwDocsQamScsEisProtocolVersion. Modified the description of hwDocsQamScsEcmgEcmTable. Modified the index of hwDocsQamScsEcmgEcmEntry from hwDocsQamScsEcmgECMID to hwDocsQamScsEcmgStreamID. Modified the value range of hwDocsQamScsEcmgStreamID from (0..65535 | 4294967295) to (0..4294967295). " REVISION "201808290000Z" DESCRIPTION "V1.34, Modified the description of hwDocsQamInputTSPIDList. Modified the description of hwDocsQamInputTSPIDStateMask. Modified the description of hwDocsQamOutputTSPIDList. Modified the description of hwDocsQamOutputTSPIDStateMask. " REVISION "201808220000Z" DESCRIPTION "V1.33, Modified the value range of hwDocsQamEISProfileCPDuration from (10..300) to (10..3600). Modified the value range of hwDocsQamInputTSPIDNumber from (0..256) to (0..512). Modified the value range of hwDocsQamOutputTSPIDNumber from (0..256) to (0..512). Modified the value range of hwDocsQamInputTSPIDList from (0..512) to (0..1024). Modified the value range of hwDocsQamInputTSPIDStateMask from (0..512) to (0..1024). Modified the value range of hwDocsQamOutputTSPIDList from (0..512) to (0..1024). Modified the value range of hwDocsQamOutputTSPIDStateMask from (0..512) to (0..1024). Added hwDocsQamEISProfileProtocol to hwDocsQamEISProfileTable. Added hwDocsQamScsEisNominalCPDuration, hwDocsQamScsEisMinAcDelayStart, hwDocsQamScsEisCpDurationConfigMode to hwDocsQamEISProfileTable. Modified the description of hwDocsQamVideoDomainReservedPID, hwDocsQamChannelProfileRate, hwDocsQamChannelSCSName, hwDocsQamEISProfileTcpPort, hwDocsQamECMGCASubSystemId, hwDocsQamECMGTcpPort, hwDocsQamSCSEISProfileName, hwDocsQamScsEisScgOriginalNetworkID, hwDocsQamScsEisScgReferenceID, hwDocsQamScsEisScgActivationTime, hwDocsQamScsEisScgRecommendedCPDuration, hwDocsQamScsEisScgEcmACTransferMode. " REVISION "201805310000Z" DESCRIPTION "V1.32, added hwDocsQamVODProcessFrameSlot, hwDocsQamVideoDomainReservedPID, hwDocsQamChannelProfileRate, hwDocsQamVODProcessGroupTable and hwDocsQamEISProfileTable, hwDocsQamECMGTable, hwDocsQamECMGChannelTable,hwDocsQamSCSTable, hwDocsQamSCSECMGTable. " REVISION "201803270000Z" DESCRIPTION "V1.31, Modified the description of hwEqamExtendLicenseDVBPortLockFlg . Modified the description of hwEqamExtendLicenseVODChannelLockFlg. Modified the description of hwDocsQamInputTSETR290MonitoringType. Modified the description of hwDocsQamInputTSETR290MonitoringState. Modified the description of hwDocsQamInputTSETR290MonitoringLastErrorIndication. Modified the description of hwDocsQamInputPIDETR290MonitoringState. Modified the description of hwDocsQamInputPIDETR290MonitoringLastErrorIndication. Modified the description of hwDocsQamNotificationPSIType. " REVISION "201803220000Z" DESCRIPTION "V1.30, Modified the default value of hwEqamExtendLicenseDVBPortLockFlg from unlocked(2) to locked(1). Modified the default value of hwEqamExtendLicenseVODChannelLockFlg from unlocked(2) to locked(1). Modified the description of hwDocsQamDVBPATErrorTrap. Modified the description of hwDocsQamDVBPATMissingTrap. Modified the description of hwDocsQamDVBPMTErrorTrap. Modified the description of hwDocsQamDVBPMTMissingTrap. Modified the description of hwDocsQamDVBContinutyCounterErrorTrap. Modified the description of hwDocsQamETR290MonitoringAlarmTsSyncLossTrap. Modified the description of hwDocsQamETR290MonitoringAlarmSyncByteErrorTrap. Modified the description of hwDocsQamETR290MonitoringAlarmPATErrorTrap. Modified the description of hwDocsQamETR290MonitoringAlarmContinuitycountErrorTrap. Modified the description of hwDocsQamETR290MonitoringAlarmPMTErrorTrap. Modified the description of hwDocsQamETR290MonitoringAlarmPIDErrorTrap. Modified the description of hwDocsQamETR290MonitoringAlarmTransportErrorTrap. Modified the description of hwDocsQamETR290MonitoringAlarmCRCErrorTrap. Modified the description of hwDocsQamETR290MonitoringAlarmPCRErrorTrap. Modified the description of hwDocsQamETR290MonitoringAlarmPCRAccuracyErrorTrap. Modified the description of hwDocsQamETR290MonitoringAlarmCATErrorTrap. " REVISION "201802280000Z" DESCRIPTION "V1.29, added hwEqamLicControlObjects. " REVISION "201802130000Z" DESCRIPTION "V1.28, added hwDocsQamVideoFrequncyOffsetCorrectionFactor to hwDocsQamVideoGlobalConfigObject. " REVISION "201801120000Z" DESCRIPTION "V1.27, added hwDocsQamVODLocalIpHashConflictTrap. Added hwFrameIndex, hwSlotIndex, hwPortIndex to HUAWEI-EQAM-AN-MIB DEFINITIONS. " REVISION "201710120000Z" DESCRIPTION "V1.26, added hwDocsQamDVBInputTsTimeOut to hwDocsQamVideoGlobalConfigObject. Added hwDocsQamDVBPrimaryInputTSLossTrap, hwDocsQamDVBPrimaryInputTSRecoveryTrap, hwDocsQamDVBSecondaryInputTSLossTrap, hwDocsQamDVBSecondaryInputTSRecoveryTrap. " REVISION "201708100000Z" DESCRIPTION "V1.25, added hwDocsQamInputTSSeamlessPrimaryPacketSpacing, hwDocsQamInputTSSeamlessSecondaryPacketSpacing, hwDocsQamInputTSSeamlessPrimaryPacketSpacingMax and hwDocsQamInputTSSeamlessSecondaryPacketSpacingMax to hwDocsQamDVBInputTSStatisticsTable. Modified the description of hwDocsQamInputTSETR290MonitoringLastErrorOccurTime. Modified the description of hwDocsQamInputPIDETR290MonitoringLastErrorOccurTime. " REVISION "201707280000Z" DESCRIPTION "V1.24, Modified the value range of hwDocsQamInputPIDETR290MonitoringPCRDiscontinuity from (1..500) to (0..4294967295). Modified the value range of hwDocsQamInputPIDETR290MonitoringPCRDiscontinuityMax from (1..500) to (0..4294967295). Modified the value range of hwDocsQamInputPIDETR290MonitoringPCRAccuracyJitter from (500..1000) to (0..4294967295). Modified the value range of hwDocsQamInputPIDETR290MonitoringPCRAccuracyJitterMax from (500..1000) to (0..4294967295). " REVISION "201707050000Z" DESCRIPTION "V1.23, added hwDocsQamETR290MonitoringObj, hwDocsQamETR290MonitoringProfileTable, hwDocsQamETR290MonitoringInputTSTable, hwDocsQamInputTSETR290DetailsTable and hwDocsQamInputPIDETR290DetailsTable. Added hwDocsQamNotificationProgramName, hwDocsQamNotificationPSIType, hwDocsQamETR290MonitoringAlarmTsSyncLossTrap, hwDocsQamETR290MonitoringAlarmSyncByteErrorTrap, hwDocsQamETR290MonitoringAlarmPATErrorTrap, hwDocsQamETR290MonitoringAlarmContinuitycountErrorTrap, hwDocsQamETR290MonitoringAlarmPMTErrorTrap, hwDocsQamETR290MonitoringAlarmPIDErrorTrap, hwDocsQamETR290MonitoringAlarmTransportErrorTrap, hwDocsQamETR290MonitoringAlarmCRCErrorTrap, hwDocsQamETR290MonitoringAlarmPCRErrorTrap, hwDocsQamETR290MonitoringAlarmPCRAccuracyErrorTrap, hwDocsQamETR290MonitoringAlarmCATErrorTrap. " REVISION "201706290000Z" DESCRIPTION "V1.22, Modified the value range of hwDocsQamLocationID from (1..4096|4294967295) to (0..4294967295). Delete BITS from HUAWEI-EQAM-AN-MIB DEFINITIONS. " REVISION "201705230000Z" DESCRIPTION "V1.21, added hwDocsQamOutputTSStatisticsOperMode to hwDocsQamOutputTSTable. Added hwDocsQamVideoProgramNumberTotalGlobal, hwDocsQamVideoProgramNumberOnlineGlobal and hwDocsQamDVBChannelMonitoringProbeDuration to hwDocsQamVideoGlobalConfigObject. Added hwDocsQamVideoStreamSrambled and hwDocsQamVideoStreamESSrambleStateList to hwDocsQamVideoStreamTable. Added hwDocsQamVODSummaryTable, hwDocsQamDVBChannelMonitoringControlTable, hwDocsQamDVBChannelMonitoringTable and hwDocsQamDVBChannelPidMonitoringTable. " REVISION "201705150000Z" DESCRIPTION "V1.20, added hwDocsQamVideoMapPIDKeepOriginal to hwDocsQamVideoMapTable. " REVISION "201702200000Z" DESCRIPTION "V1.19, added hwDocsQamInputTSStateSwitchoverReason to hwDocsQamInputTSStateTable. Added hwDocsQamInputTSRedundancyTriggers and hwDocsQamInputTSRedundancyTriggersDefault to hwDocsQamInputTSTable. Added hwDocsQamInputTSDefaultSwitchoverTriggers and hwDocsQamInputTSStatisticsClearAll to hwDocsQamVideoGlobalConfigObject. Added hwDocsQamInputTSStatisticsLastCleared to hwDocsQamDVBInputTSStatisticsTable. Modified the description of hwDocsQamFmRDSRealTimeClock. " REVISION "201612300000Z" DESCRIPTION "V1.18, added hwDocsQamInputTSMode and hwDocsQamInputTSTransportStreamID to hwDocsQamInputTSTable. Added hwDocsQamInputTSProgramState, hwDocsQamInputTSProgramRate, hwDocsQamInputTSProgramMaxRate, hwDocsQamInputTSProgramMinRate, hwDocsQamInputTSProgramCaNumber, hwDocsQamInputTSProgramCaPIDList and hwDocsQamInputTSProgramCaSystemIDList to hwDocsQamInputTSProgramTable. Added hwDocsQamOutputTSProgramState, hwDocsQamOutputTSProgramRate, hwDocsQamOutputTSProgramMaxRate, hwDocsQamOutputTSProgramMinRate, hwDocsQamOutputTSProgramCaNumber, hwDocsQamOutputTSProgramCaPIDList, hwDocsQamOutputTSProgramCaSystemIDList to hwDocsQamOutputTSProgramTable. Added hwDocsQamVideoMapEnable to hwDocsQamVideoMapTable. Added hwDocsQamDVBDomainChannelOutputEnable to hwDocsQamDVBDomainChannelTable. Added hwDocsQamInputTSProgramEsTable, hwDocsQamOutputTSTable, hwDocsQamOutputTSProgramEsTable, hwDocsQamOutputPIDInfoTable, hwDocsQamOutputTSPIDTable and hwDocsQamEPGTable. " REVISION "201612190000Z" DESCRIPTION "V1.17, added hwDocsQamLocationIDInsertionConfigObject and hwDocsQamLocationIDConfigTable. Added hwDocsQamDVBInputTSSeamlessAverageDelay,hwDocsQamDVBInputTSSeamlessMaxDelay,hwDocsQamDVBInputTSSeamlessMinDelay, hwDocsQamDVBInputTSOriginalPrimaryRTPSequenceErrorCounter and hwDocsQamDVBInputTSOriginalSecondaryRTPSequenceErrorCounter to hwDocsQamDVBInputTSStatisticsTable. " REVISION "201611080000Z" DESCRIPTION "V1.16, modified hwDocsQamInputTSUdpPort and hwDocsQamInputTSSecondaryUdpPort to hwDocsQamInputTSTable. " REVISION "201610220000Z" DESCRIPTION "V1.15, Modified the hwDocsQamFmRDSRadioTest to hwDocsQamFmRDSRadioText. " REVISION "201609270000Z" DESCRIPTION "V1.14, Modified the description of hwDocsQamFmRDSProgramType. " REVISION "201609180000Z" DESCRIPTION "V1.13, deleted hwDocsQamFmRDSCountryCode of hwDocsQamFmRDSTable. Added hwDocsQamFmRDSMode, hwDocsQamFmRDSCTDef, hwDocsQamFmRDSCountryCodeValue, hwDocsQamFmRDSTATP, hwDocsQamFmRDSDI, hwDocsQamFmRDSMS, hwDocsQamFmRDSCT and hwDocsQamFmRDSRealTimeClock to hwDocsQamFmRDSTable. " REVISION "201608310000Z" DESCRIPTION "V1.12, added hwDocsQamDVBDomainDefChannelOutputRate to hwDocsQamDVBDomainTable. Added hwDocsQamDVBDomainChannelOutputRate to hwDocsQamDVBDomainChannelTable. " REVISION "201608180000Z" DESCRIPTION "V1.11, added hwDocsQamVideoMapProgramName to hwDocsQamVideoMapTable. Added hwDocsQamDVBDomainChannelOriginalNetworkID to hwDocsQamDVBDomainChannelTable. Added hwDocsQamDVBInputTSPATErrors, hwDocsQamDVBInputTSPATMissings, hwDocsQamDVBInputTSPMTErrors, hwDocsQamDVBInputTSPMTMissings to hwDocsQamDVBInputTSStatisticsTable. Added hwDocsQamInputPIDInfoTable, hwDocsQamInputTSPIDTable. " REVISION "201606280000Z" DESCRIPTION "V1.10, added hwDocsQamInputTSEPGInput, hwDocsQamInputTSJitter and hwDocsQamInputTSRTPSequenceErrorCounter to hwDocsQamInputTSTable. Added hwDocsQamDVBDomainPSISIDefModeSDTA, hwDocsQamDVBDomainPSISIDefModeSDTO, hwDocsQamDVBDomainPSISIDefModeEITpfA, hwDocsQamDVBDomainPSISIDefModeEITpfO, hwDocsQamDVBDomainPSISIDefModeEITsFirstA, hwDocsQamDVBDomainPSISIDefModeEITsFirstO, hwDocsQamDVBDomainPSISIDefModeEITsSecondA, hwDocsQamDVBDomainPSISIDefModeEITsSecondO, hwDocsQamDVBDomainPSISIDefIntervalSDTA, hwDocsQamDVBDomainPSISIDefIntervalSDTO, hwDocsQamDVBDomainPSISIDefIntervalPAT, hwDocsQamDVBDomainPSISIDefIntervalPMT, hwDocsQamDVBDomainPSISIDefIntervalEITpfA, hwDocsQamDVBDomainPSISIDefIntervalEITpfO, hwDocsQamDVBDomainPSISIDefIntervalEITsFirstA, hwDocsQamDVBDomainPSISIDefIntervalEITsFirstO, hwDocsQamDVBDomainPSISIDefIntervalEITsSecondA, hwDocsQamDVBDomainPSISIDefIntervalEITsSecondO, and hwDocsQamDVBDomainPSISIDefSpeedEIT to hwDocsQamDVBDomainTable. Added hwDocsQamInputTSProgramName to hwDocsQamInputTSProgramTable. Added hwDocsQamOutputTSProgramName to hwDocsQamOutputTSProgramTable. Added hwDocsQamDVBInputTSDiscontinuityCounter to hwDocsQamDVBInputTSStatisticsTable. Added hwDocsQamDVBDomainChannelTable, hwDocsQamFMDomainTable, hwDocsQamFmMapTable, hwDocsQamFMPortConfigTable, hwDocsQamFmRDSTable, hwDocsQamDVBPIDMappingTable. Added three enumerated values remap(2), remapfirst(3) and remapall(4) in hwDocsQamVideoMapMode leaf node. Modified description of hwDocsQamDVBInputTSStatisticsTable and hwDocsQamDVBInputTSStatisticsEntry. Added hwDocsQamInputTSRedundancyMode to hwDocsQamInputTSTable. Added hwDocsQamDVBProcessFrameSlot to hwDocsQamVideoGlobalConfigObject. Added hwDocsQamDVBProcessGroupTable. " REVISION "201603150000Z" DESCRIPTION "V1.09, added hwDocsQamNGODEdgeDevicelocalIfType and hwDocsQamNGODEdgeDevicelocalIfNumbe to hwDocsQamNGODEdgeDeviceTable. Added hwDocsQamGratuitousArpPeriodSendMode to hwDocsQamVideoGlobalConfigObject. " REVISION "201602240000Z" DESCRIPTION "V1.08, Modified description of hwDocsQamInputTSIndex. Modified description of hwDocsQamDVBDomainRowStatus. Modified description of hwDocsQamVODPortConfigRowStatus. Modified description of hwDocsQamDVBPortConfigRowStatus. " REVISION "201601280000Z" DESCRIPTION "V1.07, Modified oid of hwDocsQamMulticastVlanId and hwDocsQamSecondaryMulticastVlanId. Modified oid of hwDocsQamVideoMapMode, hwDocsQamVideoMapNITRemap, hwDocsQamVideoMapFilterPIDList and hwDocsQamVideoMapInputTsIndex. Modified oid of hwDocsQamVideoDomainUDPPortStep and hwDocsQamVideoDomainBindVideoProfile. Modified oid of hwDocsQamVideoStreamSourceIpAddressType, hwDocsQamVideoStreamSourceIpAddress and hwDocsQamVideoStreamDiscontinuityCounter. " REVISION "201601040000Z" DESCRIPTION "V1.06, deleted hwDocsQamAutoConfigMulticastVlanId of hwDocsQamVideoGlobalConfigObject, added hwDocsQamMulticastVlanId and hwDocsQamSecondaryMulticastVlanId to hwDocsQamVideoGlobalConfigObject. Deleted hwDocsQamVideoDomainMulticastVlanID of hwDocsQamVideoDomainTable, added hwDocsQamVideoDomainBindVideoProfile and hwDocsQamVideoDomainUDPPortStep to hwDocsQamVideoDomainTable. Deleted hwDocsQamVideoMapMulticastIPAddrType and hwDocsQamVideoMapMulticastIPAddr of HwDocsQamVideoMapEntry, added hwDocsQamVideoMapInputTsIndex to HwDocsQamVideoMapEntry. Deleted hwDocsQamVideoDomainBindTable. Deleted hwDocsQamVideoStreamConfigState, hwDocsQamVideoStreamMapMode, hwDocsQamVideoStreamProgramNum, hwDocsQamVideoStreamNITRemap and hwDocsQamVideoStreamFilterPIDList of HwDocsQamVideoStreamEntry, added hwDocsQamVideoStreamSourceIpAddressType, hwDocsQamVideoStreamSourceIpAddress and hwDocsQamVideoStreamDiscontinuityCounter to HwDocsQamVideoStreamEntry. Modified name of hwDocsQamVideoInputStreamCountOfJitterOverrun to hwDocsQamVideoInputStreamCountOfJitterOverflow, Modified name of hwDocsQamVideoInputStreamCountOfJitterUnderrun to hwDocsQamVideoInputStreamCountOfJitterUnderflow. added hwDocsQamVideoInputTSDiscontinuityCounter to HwDocsQamVideoInputStreamStatisticsEntry. Added hwDocsQamDVBDomainTable, hwDocsQamInputTSTable, hwDocsQamVODPortConfigTable, hwDocsQamDVBPortConfigTable, hwDocsQamInputTSStateTable, hwDocsQamInputTSProgramTable, hwDocsQamOutputTSProgramTable, hwDocsQamDVBInputTSStatisticsTable, hwDocsQamNotificationObject, hwDocsQamDVBPATErrorTrap, hwDocsQamDVBPATMissingTrap, hwDocsQamDVBPMTErrorTrap, hwDocsQamDVBPMTMissingTrap and hwDocsQamDVBContinutyCounterErrorTrap. " REVISION "201507070000Z" DESCRIPTION "V1.05, added hwDocsQamAutoConfigMulticastVlanId to hwDocsQamVideoGlobalConfigObject. Added hwDocsQamVideoMapMulticastIPAddrType, hwDocsQamVideoMapMulticastIPAddr, hwDocsQamVideoMapMode, hwDocsQamVideoMapNITRemap and hwDocsQamVideoMapFilterPIDList to hwDocsQamVideoMapTable. Modified description of hwDocsQamVideoMapUdpPort and hwDocsQamVideoMapPmtPid to hwDocsQamVideoMapTable. Added hwDocsQamVideoDomainMulticastVlanID to hwDocsQamVideoDomainTable. Added hwDocsQamVideoStreamConfigState, hwDocsQamVideoStreamMapMode, hwDocsQamVideoStreamProgramNum, hwDocsQamVideoStreamNITRemap and hwDocsQamVideoStreamFilterPIDList to hwDocsQamVideoStreamTable. Modified description of hwDocsQamVideoStreamDestinationUdpPort to hwDocsQamVideoStreamTable. Added hwDocsQamVideoStreamMPTSProgramTable. " REVISION "201505270000Z" DESCRIPTION "V1.04, Modified the SYNTAX of hwDocsQamNGODEdgeDeviceEdgeInputIfindex from InterfaceIndexOrZero to Unsigned32. " REVISION "201502170000Z" DESCRIPTION "V1.03, added hwDocsQamNGODEdgeDeviceRecvNotificationErrPkts to hwDocsQamNGODEdgeDeviceStatisticsTable. " REVISION "201501220000Z" DESCRIPTION "V1.02, Added hwDocsQamNGODEdgeDeviceTable, hwDocsQamNGODEdgeDeviceEdgeInputTable, hwDocsQamNGODEdgeDeviceStatisticsTable and hwDocsQamChannelTable" REVISION "201405280000Z" DESCRIPTION "V1.01, add the node hwDocsQamVideoStreamTraffic." REVISION "201310100000Z" DESCRIPTION "V1.00, initial version." ::= { huaweiUtility 187 } -- Textual Conventions HwEqamPsiPolicyDvbDomain ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "PSI/SI output policy for DVB domain. 'stop' indicates PSI/SI output is disabled. 'play' indicates PSI/SI will be enabled for playout. " SYNTAX INTEGER { stop(1), play(2) } HwEqamPsiPolicyChannnel ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "PSI/SI output policy for channel. 'stop' indicates PSI/SI output is disabled. 'play' indicates PSI/SI will be enabled for playout. 'default' indicates the output policy inherits from the DVB domain. " SYNTAX INTEGER { stop(1), play(2), default(3) } HwEqamInputPIDType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Indicates the input PID type. Options: pat(1) --Program Association Table pmt(2) --Program Map Table cat(3) --Conditional Access Table nit(4) --Network Information Table sdt(5) --Service Description Table eit(6) --Event Information Table tdttot(7) --Time and Date Table/Time Offset Table ecm(8) --Entitlement Control Message emm(9) --Entitlement Management Message pcr(10) --Program Clock Reference null(11) --NULL media(12) --Media unknown(255)--Unkonwn " SYNTAX INTEGER { pat(1), pmt(2), cat(3), nit(4), sdt(5), eit(6), tdttot(7), ecm(8), emm(9), pcr(10), null(11), media(12), unknown(255) } -- Node definitions -- 1.3.6.1.4.1.2011.6.187.1 hwDocsQamVideoGlobalConfigObject OBJECT IDENTIFIER ::= { hwEqamAn 1 } -- 1.3.6.1.4.1.2011.6.187.1.1 hwDocsQamVideoTimeOutInterval OBJECT-TYPE SYNTAX Integer32 (1..6000) UNITS "second" MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the video timeout interval. Default: 60 " ::= { hwDocsQamVideoGlobalConfigObject 1 } -- 1.3.6.1.4.1.2011.6.187.1.2 hwDocsQamAutoConfigIppoolAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the address type of the address pool. Only IPv4 addresses are supported. " ::= { hwDocsQamVideoGlobalConfigObject 2 } -- 1.3.6.1.4.1.2011.6.187.1.3 hwDocsQamAutoConfigIppoolStartAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the start address of the address pool. To delete an IP address pool, bind hwDocsQamAutoConfigIppoolStartAddress and hwDocsQamAutoConfigIppoolEndAddress together and set their values to 0xff 0xff 0xff 0xff. The value of hwDocsQamAutoConfigIppoolStartAddress or hwDocsQamAutoConfigIppoolEndAddress must be set to a valid unicast IP address in other scenarios. " ::= { hwDocsQamVideoGlobalConfigObject 3 } -- 1.3.6.1.4.1.2011.6.187.1.4 hwDocsQamAutoConfigIppoolEndAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the end address of the address pool. To delete an IP address pool, bind hwDocsQamAutoConfigIppoolStartAddress and hwDocsQamAutoConfigIppoolEndAddress together and set their values to 0xff 0xff 0xff 0xff. The value of hwDocsQamAutoConfigIppoolStartAddress or hwDocsQamAutoConfigIppoolEndAddress must be set to a valid unicast IP address in other scenarios. " ::= { hwDocsQamVideoGlobalConfigObject 4 } -- 1.3.6.1.4.1.2011.6.187.1.5 hwDocsQamAutoConfigIppoolVlanId OBJECT-TYPE SYNTAX Integer32 (-1|1..4093) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the VLAN ID of the video domain. The default value is -1, indicating that the VLAN ID is invalid. " ::= { hwDocsQamVideoGlobalConfigObject 5 } -- 1.3.6.1.4.1.2011.6.187.1.6 hwDocsQamAutoConfigVideoProfile OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..15)) MAX-ACCESS read-write STATUS current DESCRIPTION "Automatically pre-configures the name of the video profile. " ::= { hwDocsQamVideoGlobalConfigObject 6 } -- 1.3.6.1.4.1.2011.6.187.1.8 hwDocsQamMulticastVlanId OBJECT-TYPE SYNTAX Integer32 (-1|1..4093) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the multicast VLAN ID of the video service. The default value is -1, indicating that the multicast VLAN ID is invalid. " ::= { hwDocsQamVideoGlobalConfigObject 8 } -- 1.3.6.1.4.1.2011.6.187.1.9 hwDocsQamSecondaryMulticastVlanId OBJECT-TYPE SYNTAX Integer32 (-1|1..4093) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the secondary multicast VLAN ID. The default value is -1, indicating that the multicast VLAN ID is invalid. " ::= { hwDocsQamVideoGlobalConfigObject 9 } -- 1.3.6.1.4.1.2011.6.187.1.10 hwDocsQamGratuitousArpPeriodSendMode OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the gratuitous ARP period send mode, the default value is disabled(2). Options: 1. enabled(1) -indicates the gratuitous ARP period send mode is enabled 2. disabled(2) -indicates the gratuitous ARP period send mode is disabled " ::= { hwDocsQamVideoGlobalConfigObject 10 } -- 1.3.6.1.4.1.2011.6.187.1.11 hwDocsQamDVBProcessFrameSlot OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the frame ID and slot ID of the DVB service processing board. The most significant 16 bits indicate the frame ID while the least significant 16 bits indicate the slot ID. The default value is 0xFFFFFFFF, indicating that no DVB service processing board is configured. " ::= { hwDocsQamVideoGlobalConfigObject 11 } -- 1.3.6.1.4.1.2011.6.187.1.12 hwDocsQamInputTSDefaultSwitchoverTriggers OBJECT-TYPE SYNTAX BITS { nobitrate(0), nosignal(1), patmissing(2), pmtmissing(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the default trigger conditions for protection switching on input TSs. The format is 4 bits. A bit of this attribute is set to 1 if the parameter indicated by the comment was present in the protection switching, and to 0 otherwise. None of the trigger bit is set by default. Bit 0 -indicates that the trigger condition is no-bitrate. Bit 1 -indicates that the trigger condition is no-signal. Bit 2 -indicates that the trigger condition is pat-missing. Bit 3 -indicates that the trigger condition is pmt-missing. " ::= { hwDocsQamVideoGlobalConfigObject 12 } -- 1.3.6.1.4.1.2011.6.187.1.13 hwDocsQamInputTSStatisticsClearAll OBJECT-TYPE SYNTAX INTEGER { clearStatistic(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Clears all the input TS statistics. Options: 1. clearStatistic(1) -Clears all the input TS statistics The default value is clearStatistic(1). " ::= { hwDocsQamVideoGlobalConfigObject 13 } -- 1.3.6.1.4.1.2011.6.187.1.14 hwDocsQamVideoProgramNumberTotalGlobal OBJECT-TYPE SYNTAX Unsigned32(0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of global VOD programs. " ::= { hwDocsQamVideoGlobalConfigObject 14 } -- 1.3.6.1.4.1.2011.6.187.1.15 hwDocsQamVideoProgramNumberOnlineGlobal OBJECT-TYPE SYNTAX Unsigned32(0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of global online VOD programs. " ::= { hwDocsQamVideoGlobalConfigObject 15 } -- 1.3.6.1.4.1.2011.6.187.1.16 hwDocsQamDVBChannelMonitoringProbeDuration OBJECT-TYPE SYNTAX Unsigned32 (60..120) UNITS "second" MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the duration of DVB channel monitoring. The default value is 60. " ::= { hwDocsQamVideoGlobalConfigObject 16 } -- 1.3.6.1.4.1.2011.6.187.1.17 hwDocsQamDVBInputTsTimeOut OBJECT-TYPE SYNTAX Unsigned32 (5..60) UNITS "second" MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the timeout interval of input TSs . The default value is 5. " ::= { hwDocsQamVideoGlobalConfigObject 17 } -- 1.3.6.1.4.1.2011.6.187.1.18 hwDocsQamVideoFrequncyOffsetCorrectionFactor OBJECT-TYPE SYNTAX Integer32 (1..10) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the frequency offset correction factor. The default value is 2. " ::= { hwDocsQamVideoGlobalConfigObject 18 } -- 1.3.6.1.4.1.2011.6.187.1.19 hwDocsQamVODProcessFrameSlot OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the frame ID and slot ID of the VOD service processing board. The most significant 16 bits indicate the frame ID while the least significant 16 bits indicate the slot ID. The default value is 0xFFFFFFFF, indicating that no VOD service processing board is configured. " ::= { hwDocsQamVideoGlobalConfigObject 19 } -- 1.3.6.1.4.1.2011.6.187.2 hwDocsQamVideoProfileTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDocsQamVideoProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the video profile table used to manage information including video mapping. The index of this table is hwDocsQamVideoProfileName. " ::= { hwEqamAn 2 } -- 1.3.6.1.4.1.2011.6.187.2.1 hwDocsQamVideoProfileEntry OBJECT-TYPE SYNTAX HwDocsQamVideoProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the video profile table used to manage information including video mapping. The index of this entry is hwDocsQamVideoProfileName. " INDEX { hwDocsQamVideoProfileName } ::= { hwDocsQamVideoProfileTable 1 } HwDocsQamVideoProfileEntry ::= SEQUENCE { hwDocsQamVideoProfileName OCTET STRING, hwDocsQamVideoProfileRowStatus RowStatus } -- 1.3.6.1.4.1.2011.6.187.2.1.1 hwDocsQamVideoProfileName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..15)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the video profile name. " ::= { hwDocsQamVideoProfileEntry 1} -- 1.3.6.1.4.1.2011.6.187.2.1.2 hwDocsQamVideoProfileRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row status, used to query, create, modify, and delete a video profile table. It supports the active(1), createAndGo(4), and destroy(6) operations. During query, the value of this leaf is always active(1). During deletion, specify the value of this leaf to destroy(6). During creation, specify the value of this leaf to createAndGo(4). To modify the parameters of a video profile table, this leaf need not be issued together. Options: 1. active(1) -indicates the query operation 2. createAndGo(4) -indicates the creating operation 3. destroy(6) -indicates the deleting operation " ::= { hwDocsQamVideoProfileEntry 2} -- 1.3.6.1.4.1.2011.6.187.3 hwDocsQamVideoMapTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDocsQamVideoMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the video mapping table used to configure the mapping between video streams and cable channels. The indexes of this table are hwDocsQamVideoProfileName and hwDocsQamVideoMapIndex. " ::= { hwEqamAn 3 } -- 1.3.6.1.4.1.2011.6.187.3.1 hwDocsQamVideoMapEntry OBJECT-TYPE SYNTAX HwDocsQamVideoMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the video mapping table used to configure the mapping between video streams and cable channels. The indexes of this entry are hwDocsQamVideoProfileName and hwDocsQamVideoMapIndex. " INDEX { hwDocsQamVideoProfileName, hwDocsQamVideoMapIndex } ::= { hwDocsQamVideoMapTable 1 } HwDocsQamVideoMapEntry ::= SEQUENCE { hwDocsQamVideoMapIndex Unsigned32, hwDocsQamVideoMapUdpPort InetPortNumber, hwDocsQamVideoMapStreamType INTEGER, hwDocsQamVideoMapInputProgram Integer32, hwDocsQamVideoMapOutputProgram Integer32, hwDocsQamVideoMapJitter Integer32, hwDocsQamVideoMapPmtPid Integer32, hwDocsQamVideoMapChannelList ChannelList, hwDocsQamVideoMapRowStatus RowStatus, hwDocsQamVideoMapMode INTEGER, hwDocsQamVideoMapNITRemap Integer32, hwDocsQamVideoMapFilterPIDList OCTET STRING, hwDocsQamVideoMapInputTsIndex Integer32, hwDocsQamVideoMapProgramName OCTET STRING, hwDocsQamVideoMapEnable TruthValue, hwDocsQamVideoMapPIDKeepOriginal TruthValue, hwDocsQamVideoMapScramblingRule BITS } -- 1.3.6.1.4.1.2011.6.187.3.1.1 hwDocsQamVideoMapIndex OBJECT-TYPE SYNTAX Unsigned32 (1..65535|4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the index of a video mapping table. You can also fill 4294967295 and the system will automatically allocate an index. " ::= { hwDocsQamVideoMapEntry 1 } -- 1.3.6.1.4.1.2011.6.187.3.1.2 hwDocsQamVideoMapUdpPort OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the UDP port number. The default value is 0, indicating that the UDP port number is invalid. Range: 0-65535 " ::= { hwDocsQamVideoMapEntry 2 } -- 1.3.6.1.4.1.2011.6.187.3.1.3 hwDocsQamVideoMapStreamType OBJECT-TYPE SYNTAX INTEGER { data(1), spts(2), mpts(3), plant(4) } MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the program stream type. Options: 1. data(1) -indicates the data type 2. spts(2) -indicates the spts type 3. mpts(3) -indicates the mpts type 4. plant(4) -indicates the plant type " ::= { hwDocsQamVideoMapEntry 3 } -- 1.3.6.1.4.1.2011.6.187.3.1.4 hwDocsQamVideoMapInputProgram OBJECT-TYPE SYNTAX Integer32 (-1|1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the program ID of the input stream. The default value is -1, indicating that the program ID is ignored. " ::= { hwDocsQamVideoMapEntry 4 } -- 1.3.6.1.4.1.2011.6.187.3.1.5 hwDocsQamVideoMapOutputProgram OBJECT-TYPE SYNTAX Integer32 (-1|1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the program ID of the output stream. The default value is -1, indicating that the program ID is ignored. " ::= { hwDocsQamVideoMapEntry 5 } -- 1.3.6.1.4.1.2011.6.187.3.1.6 hwDocsQamVideoMapJitter OBJECT-TYPE SYNTAX Integer32 (-1|0..250) UNITS "millisecond" MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the network jitter allowed. If hwDocsQamVideoMapStreamType is data or mpts, the default value is -1, indicating that network jitter is ignored. If hwDocsQamVideoMapStreamType is spts, the default value is 100. " ::= { hwDocsQamVideoMapEntry 6 } -- 1.3.6.1.4.1.2011.6.187.3.1.7 hwDocsQamVideoMapPmtPid OBJECT-TYPE SYNTAX Integer32 (-1|32..8190) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the PMT PID of the output program. If hwDocsQamVideoMapStreamType is data or hwDocsQamVideoMapStreamType is mpts and hwDocsQamVideoMapMode is passthrough, the default value is -1, indicating that output programs' PMT PIDs are ignored; if hwDocsQamVideoMapStreamType is spts or hwDocsQamVideoMapStreamType is mpts and hwDocsQamVideoMapMode is not passthrough, when the user does not specify the pmt pid, the system will automatically allocate one. " ::= { hwDocsQamVideoMapEntry 7 } -- 1.3.6.1.4.1.2011.6.187.3.1.8 hwDocsQamVideoMapChannelList OBJECT-TYPE SYNTAX ChannelList MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the channel list for output videos. " ::= { hwDocsQamVideoMapEntry 8 } -- 1.3.6.1.4.1.2011.6.187.3.1.9 hwDocsQamVideoMapRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row status, used to query, create, modify, and delete a video mapping table. It supports the active(1), createAndGo(4), and destroy(6) operations. During query, the value of this leaf is always active(1). During deletion, specify the value of this leaf to destroy(6). During creation, specify the value of this leaf to createAndGo(4). To modify the parameters of a video mapping table, this leaf need not be issued together. Options: 1. active(1) -indicates the query operation 2. createAndGo(4) -indicates the creating operation 3. destroy(6) -indicates the deleting operation " ::= { hwDocsQamVideoMapEntry 9} -- 1.3.6.1.4.1.2011.6.187.3.1.12 hwDocsQamVideoMapMode OBJECT-TYPE SYNTAX INTEGER { passthrough(1), remap(2), remapfirst(3), remapall(4), invalid(255) } MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the video stream map mode, the default value is invalid(255). Options: 1. passthrough(1) -indicates the MPTS video stream mode is passthrough. When video stream is configured to this mode, all programs from the input TS will transparently forward to the output without any modifications. 2. remap(2) -indicates the MPTS video stream mode is remap. When video stream configured to this mode, only one specified program from the input TS will be remap to the output with the specified program id and program name. 3. remapfirst(3) -indicates the MPTS video stream mode is remapfirst. When video stream configured to this mode, only the first learned program from the input TS will be remap to the output automatically without any modifications of program id or program name. 4. remapall(4) -indicates the MPTS video stream mode is remapall. When video stream configured to this mode, all learned programs from the input TS will be remap to the output automatically without any modifications of program id or program name. 5. invalid(255) -indicates the video stream mode is ignored if hwDocsQamVideoMapStreamType is not mpts. " ::= { hwDocsQamVideoMapEntry 12 } -- 1.3.6.1.4.1.2011.6.187.3.1.13 hwDocsQamVideoMapNITRemap OBJECT-TYPE SYNTAX Integer32 (-1 | 16 | 32..8190) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the output NIT PID which the input NIT PID mapped to. If hwDocsQamVideoMapStreamType is not mpts, the default value is always -1, indicating that the NIT remap PID is ignored. If hwDocsQamVideoMapStreamType is mpts, vlaue -1 means cancel the NIT remap. " ::= { hwDocsQamVideoMapEntry 13 } -- 1.3.6.1.4.1.2011.6.187.3.1.14 hwDocsQamVideoMapFilterPIDList OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the filter PID list which are not allowed to forward. Filter PID consists of two bytes and no greater than 8190. Max of 32 filter PIDs can be configured for each video mapping. If hwDocsQamVideoMapStreamType is not mpts, the default value is always null string, indicating that the filter PID is ignored. If hwDocsQamVideoMapStreamType is mpts, the default value null string means cancel the PID filter. " ::= { hwDocsQamVideoMapEntry 14 } -- 1.3.6.1.4.1.2011.6.187.3.1.15 hwDocsQamVideoMapInputTsIndex OBJECT-TYPE SYNTAX Integer32 (-1|1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the index of the transport stream, the default value is -1, indicating that the index of the transport stream is ignored. " ::= { hwDocsQamVideoMapEntry 15} -- 1.3.6.1.4.1.2011.6.187.3.1.16 hwDocsQamVideoMapProgramName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..63)) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the name of an output program in video mapping. The default value is a null string, which indicates that the name of the input program is inherited. " ::= { hwDocsQamVideoMapEntry 16} -- 1.3.6.1.4.1.2011.6.187.3.1.17 hwDocsQamVideoMapEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the enabling status of video mapping. If hwDocsQamVideoMapStreamType is mpts, this value can be set to true or false; if hwDocsQamVideoMapStreamType is not mpts, this value can be set to only true. The default value is true(1)." ::= { hwDocsQamVideoMapEntry 17} -- 1.3.6.1.4.1.2011.6.187.3.1.18 hwDocsQamVideoMapPIDKeepOriginal OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the keeping program PID original of video mapping. If hwDocsQamVideoMapMode is remap, this value can be set to true or false; if hwDocsQamVideoMapMode is not remap, this value can be set to only false. The default value is false(2)." ::= { hwDocsQamVideoMapEntry 18} -- 1.3.6.1.4.1.2011.6.187.3.1.19 hwDocsQamVideoMapScramblingRule OBJECT-TYPE SYNTAX BITS { reserved(0), other(1), video(2), audio(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the scrambling rule of video mapping. reserved 0 - reserved. other 1 - other scrambling rule. video 2 - video scrambling rule. audio 3 - audio scrambling rule. " ::= { hwDocsQamVideoMapEntry 19 } -- 1.3.6.1.4.1.2011.6.187.4 hwDocsQamVideoDomainTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDocsQamVideoDomainEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the video domain table used to manage information, such as EQAM's IP address. The index of this table is hwDocsQamVideoDomainName. " ::= { hwEqamAn 4 } -- 1.3.6.1.4.1.2011.6.187.4.1 hwDocsQamVideoDomainEntry OBJECT-TYPE SYNTAX HwDocsQamVideoDomainEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the video domain table used to manage information, such as EQAM's IP address. The index of this entry is hwDocsQamVideoDomainName. " INDEX { hwDocsQamVideoDomainName } ::= { hwDocsQamVideoDomainTable 1 } HwDocsQamVideoDomainEntry ::= SEQUENCE { hwDocsQamVideoDomainName OCTET STRING, hwDocsQamVideoDomainLocalIpAddress InetAddress, hwDocsQamVideoDomainLocalIpAddressType InetAddressType, hwDocsQamVideoDomainLocalVlanID Integer32, hwDocsQamVideoDomainRowStatus RowStatus, hwDocsQamVideoDomainUDPPortStep Unsigned32, hwDocsQamVideoDomainBindVideoProfile OCTET STRING, hwDocsQamVideoDomainReservedPID OCTET STRING, hwDocsQamVideoDomainLocalInterfaceLoopbackNumber Unsigned32 } -- 1.3.6.1.4.1.2011.6.187.4.1.1 hwDocsQamVideoDomainName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..15)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the video domain name. " ::= { hwDocsQamVideoDomainEntry 1 } -- 1.3.6.1.4.1.2011.6.187.4.1.2 hwDocsQamVideoDomainLocalIpAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the local IP address of the video domain. " ::= { hwDocsQamVideoDomainEntry 2 } -- 1.3.6.1.4.1.2011.6.187.4.1.3 hwDocsQamVideoDomainLocalIpAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the local IP address type of the local end. " ::= { hwDocsQamVideoDomainEntry 3 } -- 1.3.6.1.4.1.2011.6.187.4.1.4 hwDocsQamVideoDomainLocalVlanID OBJECT-TYPE SYNTAX Integer32 (-1|1..4093) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the local VLAN ID of the video domain. The default value is -1, indicating that the local VLAN ID is invalid. " ::= { hwDocsQamVideoDomainEntry 4 } -- 1.3.6.1.4.1.2011.6.187.4.1.5 hwDocsQamVideoDomainRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row status, used to query, create, modify, and delete a video domain table. It supports the active(1), createAndGo(4), and destroy(6) operations. During query, the value of this leaf is always active(1). During deletion, specify the value of this leaf to destroy(6). During creation, specify the value of this leaf to createAndGo(4). To modify the parameters of a video domain table, this leaf need not be issued together. Options: 1. active(1) -indicates the query operation 2. createAndGo(4) -indicates the creating operation 3. destroy(6) -indicates the deleting operation " ::= { hwDocsQamVideoDomainEntry 5 } -- 1.3.6.1.4.1.2011.6.187.4.1.7 hwDocsQamVideoDomainUDPPortStep OBJECT-TYPE SYNTAX Unsigned32(1..10000) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the step of udp port. The default value is 512. " ::= { hwDocsQamVideoDomainEntry 7 } -- 1.3.6.1.4.1.2011.6.187.4.1.8 hwDocsQamVideoDomainBindVideoProfile OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..15)) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the bind video profile name. " ::= { hwDocsQamVideoDomainEntry 8 } -- 1.3.6.1.4.1.2011.6.187.4.1.9 hwDocsQamVideoDomainReservedPID OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..8)) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the reserved pid of video domain. For the reserved PID, you can enter 1 or 2 ranges, and specify a 2-byte minimum value and a 2-byte maximum value for each range. For example, value 0x00 0x20 0x00 0x30 0x00 0x90 0x00 0xF0 indicates that 2 ranges ( range 32-48 and range 144-240 ) are configured. For another example, value 0x01 0x10 0x01 0x20 indicates that the reserved PID range is configured as 272-288. The default value is a null string, indicating that the reserved PID is not configured. " ::= { hwDocsQamVideoDomainEntry 9 } -- 1.3.6.1.4.1.2011.6.187.4.1.10 hwDocsQamVideoDomainLocalInterfaceLoopbackNumber OBJECT-TYPE SYNTAX Unsigned32 (0..31|4294967295) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the local Loopback Interface of the video domain. The default value is 4294967295. " DEFVAL { 4294967295 } ::= { hwDocsQamVideoDomainEntry 10 } -- 1.3.6.1.4.1.2011.6.187.6 hwDocsQamChannelProfileTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDocsQamChannelProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the EQAM channel profile table used for managing parameters related to channels. The index of this table is hwDocsQamChannelProfileName. " ::= { hwEqamAn 6 } -- 1.3.6.1.4.1.2011.6.187.6.1 hwDocsQamChannelProfileEntry OBJECT-TYPE SYNTAX HwDocsQamChannelProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the EQAM channel profile table used for managing parameters related to channels. The index of this entry is hwDocsQamChannelProfileName. " INDEX { hwDocsQamChannelProfileName } ::= { hwDocsQamChannelProfileTable 1 } HwDocsQamChannelProfileEntry ::= SEQUENCE { hwDocsQamChannelProfileName OCTET STRING, hwDocsQamChannelProfileTransportStreamID Integer32, hwDocsQamChannelProfilePATSendPeriod Integer32, hwDocsQamChannelProfilePMTSendPeriod Integer32, hwDocsQamChannelProfileRowStatus RowStatus, hwDocsQamChannelProfileRate Unsigned32 } -- 1.3.6.1.4.1.2011.6.187.6.1.1 hwDocsQamChannelProfileName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..15)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the name of the channel profile table. " ::= { hwDocsQamChannelProfileEntry 1 } -- 1.3.6.1.4.1.2011.6.187.6.1.2 hwDocsQamChannelProfileTransportStreamID OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the transport stream ID. " DEFVAL { 0 } ::= { hwDocsQamChannelProfileEntry 2 } -- 1.3.6.1.4.1.2011.6.187.6.1.3 hwDocsQamChannelProfilePATSendPeriod OBJECT-TYPE SYNTAX Integer32 (30..1000) UNITS "millisecond" MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the PAT send interval. " DEFVAL { 100 } ::= { hwDocsQamChannelProfileEntry 3 } -- 1.3.6.1.4.1.2011.6.187.6.1.4 hwDocsQamChannelProfilePMTSendPeriod OBJECT-TYPE SYNTAX Integer32 (30..1000) UNITS "millisecond" MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the PMT send interval. " DEFVAL { 100 } ::= { hwDocsQamChannelProfileEntry 4 } -- 1.3.6.1.4.1.2011.6.187.6.1.5 hwDocsQamChannelProfileRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row status, used to query, create, modify, and delete a channel profile table. It supports the active(1), createAndGo(4), and destroy(6) operations. During query, the value of this leaf is always active(1). During deletion, specify the value of this leaf to destroy(6). During creation, specify the value of this leaf to createAndGo(4). To modify the parameters of a channel profile table, this leaf need not be issued together. Options: 1. active(1) -indicates the query operation 2. createAndGo(4) -indicates the creating operation 3. destroy(6) -indicates the deleting operation " ::= { hwDocsQamChannelProfileEntry 5 } -- 1.3.6.1.4.1.2011.6.187.6.1.6 hwDocsQamChannelProfileRate OBJECT-TYPE SYNTAX Unsigned32(0..10000000) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the rate of channel. The default value is 38015kbps. " DEFVAL { 38015 } ::= { hwDocsQamChannelProfileEntry 6 } -- 1.3.6.1.4.1.2011.6.187.7 hwDocsQamDChannelBindTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDocsQamDChannelBindEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the EQAM channel binding table used for managing binding relationships between channel profiles and channel IDs. The index of this table is ifIndex. " ::= { hwEqamAn 7 } -- 1.3.6.1.4.1.2011.6.187.7.1 hwDocsQamDChannelBindEntry OBJECT-TYPE SYNTAX HwDocsQamDChannelBindEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the EQAM channel binding table used for managing binding relationships between channel profiles and channel IDs. The index of this entry is ifIndex. " INDEX { ifIndex } ::= { hwDocsQamDChannelBindTable 1 } HwDocsQamDChannelBindEntry ::= SEQUENCE { hwDocsQamDChannelBindProfileName OCTET STRING } -- 1.3.6.1.4.1.2011.6.187.7.1.1 hwDocsQamDChannelBindProfileName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..15)) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the channel profile name. hwDocsQamChannelProfileTable is a reference for setting parameters in the profile. " ::= { hwDocsQamDChannelBindEntry 1 } -- 1.3.6.1.4.1.2011.6.187.8 hwDocsQamVideoStreamTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDocsQamVideoStreamEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the dynamic video stream information table used for obtaining dynamic video stream information. The indexes of this table are ifIndex and hwDocsQamVideoStreamIndex. " ::= { hwEqamAn 8 } -- 1.3.6.1.4.1.2011.6.187.8.1 hwDocsQamVideoStreamEntry OBJECT-TYPE SYNTAX HwDocsQamVideoStreamEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the dynamic video stream information table used for obtaining dynamic video stream information. The indexes of this entry are ifIndex and hwDocsQamVideoStreamIndex. " INDEX { ifIndex, hwDocsQamVideoStreamIndex } ::= { hwDocsQamVideoStreamTable 1 } HwDocsQamVideoStreamEntry ::= SEQUENCE { hwDocsQamVideoStreamIndex Unsigned32, hwDocsQamVideoStreamDestinationIpAddress InetAddress, hwDocsQamVideoStreamDestinationIpAddressType InetAddressType, hwDocsQamVideoStreamDestinationUdpPort InetPortNumber, hwDocsQamVideoStreamType INTEGER, hwDocsQamVideoStreamJitter Integer32, hwDocsQamVideoStreamState INTEGER, hwDocsQamVideoStreamInputStreamID Integer32, hwDocsQamVideoStreamInputProgram Integer32, hwDocsQamVideoStreamInputPMTPID Integer32, hwDocsQamVideoStreamInputPCRPID Integer32, hwDocsQamVideoStreamOutputStreamID Integer32, hwDocsQamVideoStreamOutputProgram Integer32, hwDocsQamVideoStreamOutputPMTPID Integer32, hwDocsQamVideoStreamOutputPCRPID Integer32, hwDocsQamVideoStreamInputESPIDList OCTET STRING, hwDocsQamVideoStreamOutputESPIDList OCTET STRING, hwDocsQamVideoStreamESTypeList OCTET STRING, hwDocsQamVideoStreamChannelList ChannelList, hwDocsQamVideoStreamTraffic Unsigned32, hwDocsQamVideoStreamSourceIpAddressType InetAddressType, hwDocsQamVideoStreamSourceIpAddress InetAddress, hwDocsQamVideoStreamDiscontinuityCounter Counter64, hwDocsQamVideoStreamSrambled TruthValue, hwDocsQamVideoStreamESSrambleStateList OCTET STRING, hwDocsQamVideoStreamOutputESSrambleStateList OCTET STRING } -- 1.3.6.1.4.1.2011.6.187.8.1.1 hwDocsQamVideoStreamIndex OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the index of a dynamic video stream information table. " ::= { hwDocsQamVideoStreamEntry 1 } -- 1.3.6.1.4.1.2011.6.187.8.1.2 hwDocsQamVideoStreamDestinationIpAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the destination IP address. " ::= { hwDocsQamVideoStreamEntry 2 } -- 1.3.6.1.4.1.2011.6.187.8.1.3 hwDocsQamVideoStreamDestinationIpAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the destination IP address type. " ::= { hwDocsQamVideoStreamEntry 3 } -- 1.3.6.1.4.1.2011.6.187.8.1.4 hwDocsQamVideoStreamDestinationUdpPort OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the destination UDP port number. The default value is 0, indicating that the UDP port number is invalid. Range: 0-65535 " ::= { hwDocsQamVideoStreamEntry 4 } -- 1.3.6.1.4.1.2011.6.187.8.1.5 hwDocsQamVideoStreamType OBJECT-TYPE SYNTAX INTEGER { data(1), spts(2), mpts(3), plant(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the data flow type. Options: 1. data(1) -indicates the data type 2. spts(2) -indicates the spts type 3. mpts(3) -indicates the mpts type 4. plant(4) -indicates the plant type " ::= { hwDocsQamVideoStreamEntry 5 } -- 1.3.6.1.4.1.2011.6.187.8.1.6 hwDocsQamVideoStreamJitter OBJECT-TYPE SYNTAX Integer32 (-1|0..250) UNITS "millisecond" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the network jitter allowed. If the current video stream is not supported, -1 is returned. " ::= { hwDocsQamVideoStreamEntry 6 } -- 1.3.6.1.4.1.2011.6.187.8.1.7 hwDocsQamVideoStreamState OBJECT-TYPE SYNTAX INTEGER { offline(1), online(2), unknown(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the video stream status. Options: 1. offline(1) -indicates the offline state 2. online(2) -indicates the online state 3. unknown(3) -indicates the unknown state " ::= { hwDocsQamVideoStreamEntry 7 } -- 1.3.6.1.4.1.2011.6.187.8.1.8 hwDocsQamVideoStreamInputStreamID OBJECT-TYPE SYNTAX Integer32 (-1|0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the input transport stream ID, the value -1 indicates that the input transport stream ID is invalid. " ::= { hwDocsQamVideoStreamEntry 8 } -- 1.3.6.1.4.1.2011.6.187.8.1.9 hwDocsQamVideoStreamInputProgram OBJECT-TYPE SYNTAX Integer32 (-1|0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the input program ID, the value -1 indicates that the input program ID is invalid. " ::= { hwDocsQamVideoStreamEntry 9 } -- 1.3.6.1.4.1.2011.6.187.8.1.10 hwDocsQamVideoStreamInputPMTPID OBJECT-TYPE SYNTAX Integer32 (-1|0..8191) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the input PMT PID, the value -1 indicates that the input PMT PID is invalid. " ::= { hwDocsQamVideoStreamEntry 10 } -- 1.3.6.1.4.1.2011.6.187.8.1.11 hwDocsQamVideoStreamInputPCRPID OBJECT-TYPE SYNTAX Integer32 (-1|0..8191) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the input PCR PID, the value -1 indicates that the input PCR PID is invalid. " ::= { hwDocsQamVideoStreamEntry 11 } -- 1.3.6.1.4.1.2011.6.187.8.1.12 hwDocsQamVideoStreamOutputStreamID OBJECT-TYPE SYNTAX Integer32 (-1|0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the output transport stream ID, the value -1 indicates that the output transport stream ID is invalid. " ::= { hwDocsQamVideoStreamEntry 12 } -- 1.3.6.1.4.1.2011.6.187.8.1.13 hwDocsQamVideoStreamOutputProgram OBJECT-TYPE SYNTAX Integer32 (-1|0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the program ID of the output stream, the value -1 indicates that the program ID of the output stream is invalid. " ::= { hwDocsQamVideoStreamEntry 13 } -- 1.3.6.1.4.1.2011.6.187.8.1.14 hwDocsQamVideoStreamOutputPMTPID OBJECT-TYPE SYNTAX Integer32 (-1|0..8191) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the PMT PID of the output stream, the value -1 indicates that the PMT PID of the output stream is invalid. " ::= { hwDocsQamVideoStreamEntry 14 } -- 1.3.6.1.4.1.2011.6.187.8.1.15 hwDocsQamVideoStreamOutputPCRPID OBJECT-TYPE SYNTAX Integer32 (-1|0..8191) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the PCR PID of the output stream, the value -1 indicates that the PCR PID of the output stream is invalid. " ::= { hwDocsQamVideoStreamEntry 15 } -- 1.3.6.1.4.1.2011.6.187.8.1.16 hwDocsQamVideoStreamInputESPIDList OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the ESPID list for input streams. PID consists of two bytes and must be in one-to-one mapping with ESTypeList. " ::= { hwDocsQamVideoStreamEntry 16 } -- 1.3.6.1.4.1.2011.6.187.8.1.17 hwDocsQamVideoStreamOutputESPIDList OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the ESPID list for output streams. PID consists of two bytes and must be in one-to-one mapping with ESTypeList. " ::= { hwDocsQamVideoStreamEntry 17 } -- 1.3.6.1.4.1.2011.6.187.8.1.18 hwDocsQamVideoStreamESTypeList OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicate the ES type list. One byte indicates a type, which must be in one-to-one mapping with the ESPID list for input or output streams. " ::= { hwDocsQamVideoStreamEntry 18 } -- 1.3.6.1.4.1.2011.6.187.8.1.19 hwDocsQamVideoStreamChannelList OBJECT-TYPE SYNTAX ChannelList MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the output channel list. " ::= { hwDocsQamVideoStreamEntry 19 } -- 1.3.6.1.4.1.2011.6.187.8.1.20 hwDocsQamVideoStreamTraffic OBJECT-TYPE SYNTAX Unsigned32 UNITS "kbps" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the video stream traffic. " ::= { hwDocsQamVideoStreamEntry 20 } -- 1.3.6.1.4.1.2011.6.187.8.1.26 hwDocsQamVideoStreamSourceIpAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the address type of the source IP address in video stream. Only IPv4 addresses are supported. " ::= { hwDocsQamVideoStreamEntry 26 } -- 1.3.6.1.4.1.2011.6.187.8.1.27 hwDocsQamVideoStreamSourceIpAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the source IP address of the video stream. " ::= { hwDocsQamVideoStreamEntry 27 } -- 1.3.6.1.4.1.2011.6.187.8.1.28 hwDocsQamVideoStreamDiscontinuityCounter OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the discontinuity counter of video stream. Default: 0 " ::= { hwDocsQamVideoStreamEntry 28 } -- 1.3.6.1.4.1.2011.6.187.8.1.29 hwDocsQamVideoStreamSrambled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether a VOD program is scrambled. If one ES is scrambled, the entire program is scrambled. Default: false(2). " ::= { hwDocsQamVideoStreamEntry 29 } -- 1.3.6.1.4.1.2011.6.187.8.1.30 hwDocsQamVideoStreamESSrambleStateList OBJECT-TYPE SYNTAX OCTET STRING(SIZE (0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the sramble type mask of the video input stream ES. The default value is an empty character string, indicating no sramble type list mask. Format: 2 bytes in network byte order, which indicates a sramble type list mask. A maximum of 64 sramble type list masks are supported. a 2-byte bit-field value defined as follows: Bit 0:notScambled Bit 1:evenScambled Bit 2:oddScambled " ::= { hwDocsQamVideoStreamEntry 30 } -- 1.3.6.1.4.1.2011.6.187.8.1.31 hwDocsQamVideoStreamOutputESSrambleStateList OBJECT-TYPE SYNTAX OCTET STRING(SIZE (0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the sramble type mask of the video output stream ES. The default value is an empty character string, indicating no sramble type list mask. Format: 2 bytes in network byte order, which indicates a sramble type list mask. A maximum of 64 sramble type list masks are supported. a 2-byte bit-field value defined as follows: Bit 0:notScambled Bit 1:evenScambled Bit 2:oddScambled " ::= { hwDocsQamVideoStreamEntry 31 } -- 1.3.6.1.4.1.2011.6.187.9 hwDocsQamVideoInputStreamStatisticsTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDocsQamVideoInputStreamStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the input statistics table for dynamic video streams. The indexes of this table are ifIndex and hwDocsQamVideoInputStreamStatisticsIndex. " ::= { hwEqamAn 9 } -- 1.3.6.1.4.1.2011.6.187.9.1 hwDocsQamVideoInputStreamStatisticsEntry OBJECT-TYPE SYNTAX HwDocsQamVideoInputStreamStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the input statistics table for dynamic video streams. The indexes of this entry are ifIndex and hwDocsQamVideoInputStreamStatisticsIndex. " INDEX { ifIndex, hwDocsQamVideoInputStreamStatisticsIndex } ::= { hwDocsQamVideoInputStreamStatisticsTable 1 } HwDocsQamVideoInputStreamStatisticsEntry ::= SEQUENCE { hwDocsQamVideoInputStreamStatisticsIndex Unsigned32, hwDocsQamVideoInputStreamOperMode INTEGER, hwDocsQamVideoInputStreamPackets Counter64, hwDocsQamVideoInputStreamCountOfJitterOverflow Counter64, hwDocsQamVideoInputStreamCountOfJitterUnderflow Counter64, hwDocsQamVideoInputTSDiscontinuityCounter Counter64 } -- 1.3.6.1.4.1.2011.6.187.9.1.1 hwDocsQamVideoInputStreamStatisticsIndex OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the index of input statistics table for dynamic video streams. " ::= { hwDocsQamVideoInputStreamStatisticsEntry 1 } -- 1.3.6.1.4.1.2011.6.187.9.1.2 hwDocsQamVideoInputStreamOperMode OBJECT-TYPE SYNTAX INTEGER { clearStatistic(1), invalid(-1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the operation mode. The set operation can clear input statistics for dynamic video streams. Options: 1. clearStatistic(1) -indicates clearing input statistics for dynamic video streams 2. invalid(-1) -indicates invalid " ::= { hwDocsQamVideoInputStreamStatisticsEntry 2 } -- 1.3.6.1.4.1.2011.6.187.9.1.3 hwDocsQamVideoInputStreamPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates packet statistics for input streams. " ::= { hwDocsQamVideoInputStreamStatisticsEntry 3 } -- 1.3.6.1.4.1.2011.6.187.9.1.4 hwDocsQamVideoInputStreamCountOfJitterOverflow OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the jitter overflow statistics. " ::= { hwDocsQamVideoInputStreamStatisticsEntry 4 } -- 1.3.6.1.4.1.2011.6.187.9.1.5 hwDocsQamVideoInputStreamCountOfJitterUnderflow OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the jitter underflow statistics. " ::= { hwDocsQamVideoInputStreamStatisticsEntry 5 } -- 1.3.6.1.4.1.2011.6.187.9.1.6 hwDocsQamVideoInputTSDiscontinuityCounter OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the discontinuity counter of input streams. " ::= { hwDocsQamVideoInputStreamStatisticsEntry 6 } -- 1.3.6.1.4.1.2011.6.187.10 hwDocsQamVideoOutputDChannelStatisticsTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDocsQamVideoOutputDChannelStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the output channel statistics table for dynamic video streams. The index of this table is ifIndex. " ::= { hwEqamAn 10 } -- 1.3.6.1.4.1.2011.6.187.10.1 hwDocsQamVideoOutputDChannelStatisticsEntry OBJECT-TYPE SYNTAX HwDocsQamVideoOutputDChannelStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the output channel statistics table for dynamic video streams. The index of this entry is ifIndex. " INDEX { ifIndex } ::= { hwDocsQamVideoOutputDChannelStatisticsTable 1 } HwDocsQamVideoOutputDChannelStatisticsEntry ::= SEQUENCE { hwDocsQamVideoOutputDChannelOperMode INTEGER, hwDocsQamVideoOutputDChannelPackets Counter64, hwDocsQamVideoOutputDChannelDiscardPackets Counter64, hwDocsQamVideoOutputDChannelPATNumber Counter64, hwDocsQamVideoOutputDChannelPMTNumber Counter64, hwDocsQamVideoOutputDChannelCATNumber Counter64 } -- 1.3.6.1.4.1.2011.6.187.10.1.1 hwDocsQamVideoOutputDChannelOperMode OBJECT-TYPE SYNTAX INTEGER { clearStatistic(1), invalid(-1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the operation mode. The set operation can clear output channel statistics for dynamic video streams. Options: 1. clearStatistic(1) -indicates clearing output channel statistics for dynamic video streams 2. invalid(-1) -indicates invalid " ::= { hwDocsQamVideoOutputDChannelStatisticsEntry 1 } -- 1.3.6.1.4.1.2011.6.187.10.1.2 hwDocsQamVideoOutputDChannelPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the packet statistics for output channels. " ::= { hwDocsQamVideoOutputDChannelStatisticsEntry 2 } -- 1.3.6.1.4.1.2011.6.187.10.1.3 hwDocsQamVideoOutputDChannelDiscardPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the packet loss statistics for output channels. " ::= { hwDocsQamVideoOutputDChannelStatisticsEntry 3 } -- 1.3.6.1.4.1.2011.6.187.10.1.4 hwDocsQamVideoOutputDChannelPATNumber OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the PAT statistics for output channels. " ::= { hwDocsQamVideoOutputDChannelStatisticsEntry 4 } -- 1.3.6.1.4.1.2011.6.187.10.1.5 hwDocsQamVideoOutputDChannelPMTNumber OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the PMT statistics for output channels. " ::= { hwDocsQamVideoOutputDChannelStatisticsEntry 5 } -- 1.3.6.1.4.1.2011.6.187.10.1.6 hwDocsQamVideoOutputDChannelCATNumber OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the CAT statistics for output channels. " ::= { hwDocsQamVideoOutputDChannelStatisticsEntry 6 } -- 1.3.6.1.4.1.2011.6.187.11 hwDocsQamNGODEdgeDeviceTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDocsQamNGODEdgeDeviceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the edge device table. The index of this table is hwDocsQamNGODEdgeDeviceName. " ::= { hwEqamAn 11 } -- 1.3.6.1.4.1.2011.6.187.11.1 hwDocsQamNGODEdgeDeviceEntry OBJECT-TYPE SYNTAX HwDocsQamNGODEdgeDeviceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the edge device table. The index of this entry is hwDocsQamNGODEdgeDeviceName. " INDEX { hwDocsQamNGODEdgeDeviceName } ::= { hwDocsQamNGODEdgeDeviceTable 1 } HwDocsQamNGODEdgeDeviceEntry ::= SEQUENCE { hwDocsQamNGODEdgeDeviceName OCTET STRING, hwDocsQamNGODEdgeDeviceStreamingZone OCTET STRING, hwDocsQamNGODEdgeDevicePeerAddressType InetAddressType, hwDocsQamNGODEdgeDevicePeerAddress InetAddress, hwDocsQamNGODEdgeDevicePeerPort InetPortNumber, hwDocsQamNGODEdgeDeviceLocalAddressType InetAddressType, hwDocsQamNGODEdgeDeviceLocalAddress InetAddress, hwDocsQamNGODEdgeDeviceVREPIDMode INTEGER, hwDocsQamNGODEdgeDeviceVREPID Unsigned32, hwDocsQamNGODEdgeDeviceHoldTime Unsigned32, hwDocsQamNGODEdgeDeviceConnectRetry Unsigned32, hwDocsQamNGODEdgeDeviceActive TruthValue, hwDocsQamNGODEdgeDeviceState INTEGER, hwDocsQamNGODEdgeDeviceNegotiatedHoldTime Unsigned32, hwDocsQamNGODEdgeDeviceEstablishedPeerAddressType InetAddressType, hwDocsQamNGODEdgeDeviceEstablishedPeerAddress InetAddress, hwDocsQamNGODEdgeDeviceEstablishedPeerPort InetPortNumber, hwDocsQamNGODEdgeDeviceEstablishedLocalAddressType InetAddressType, hwDocsQamNGODEdgeDeviceEstablishedLocalAddress InetAddress, hwDocsQamNGODEdgeDeviceEstablishedLocalPort InetPortNumber, hwDocsQamNGODEdgeDeviceCost Unsigned32, hwDocsQamNGODEdgeDevicelocalIfType INTEGER, hwDocsQamNGODEdgeDevicelocalIfNumber Integer32, hwDocsQamNGODEdgeDeviceRowStatus RowStatus } -- 1.3.6.1.4.1.2011.6.187.11.1.1 hwDocsQamNGODEdgeDeviceName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION " This attribute is the key that identifies the instance of the edge device. Suggested format .. " REFERENCE "Comcast-SP-NGOD-GEN-SDR-I03-100731" ::= { hwDocsQamNGODEdgeDeviceEntry 1} -- 1.3.6.1.4.1.2011.6.187.11.1.2 hwDocsQamNGODEdgeDeviceStreamingZone OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..31)) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute identifies the streaming zone name which the edge device belongs to. Suggested format .. Null string means that the edge device does not belong to any streaming zone. " REFERENCE "Comcast-SP-NGOD-GEN-SDR-I03-100731" ::= { hwDocsQamNGODEdgeDeviceEntry 2} -- 1.3.6.1.4.1.2011.6.187.11.1.3 hwDocsQamNGODEdgeDevicePeerAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute identifies the IP address type of ERM peer which the edge device setting up VREP session with. " ::= { hwDocsQamNGODEdgeDeviceEntry 3 } -- 1.3.6.1.4.1.2011.6.187.11.1.4 hwDocsQamNGODEdgeDevicePeerAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute identifies the IP address of ERM peer which the edge device setting up VREP session with. " ::= { hwDocsQamNGODEdgeDeviceEntry 4 } -- 1.3.6.1.4.1.2011.6.187.11.1.5 hwDocsQamNGODEdgeDevicePeerPort OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute identifies the TCP port number of ERM peer which the edge device setting up VREP session with. The default port number is 6069. " ::= { hwDocsQamNGODEdgeDeviceEntry 5 } -- 1.3.6.1.4.1.2011.6.187.11.1.6 hwDocsQamNGODEdgeDeviceLocalAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute identifies the IP address type of the edge device to setup VREP session. " ::= { hwDocsQamNGODEdgeDeviceEntry 6 } -- 1.3.6.1.4.1.2011.6.187.11.1.7 hwDocsQamNGODEdgeDeviceLocalAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute identifies the IP address of the edge device to setup VREP session. " ::= { hwDocsQamNGODEdgeDeviceEntry 7 } -- 1.3.6.1.4.1.2011.6.187.11.1.8 hwDocsQamNGODEdgeDeviceVREPIDMode OBJECT-TYPE SYNTAX INTEGER { localip(1), integer(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute identifies the IP address type of the edge device to setup VREP session.. The default value is localip(1). Options: 1. localip(1) -indicates the localip mode. In this mode, edge device uses the hwDocsQamNGODEdgeDeviceLocalAddress as the VREPID in the VREP OPEN message. 2. integer(2) -indicates the integer mode. In this mode, edge device uses the manual configured VREPID which can be configured through hwDocsQamNGODEdgeDeviceVREPID as the VREPID in the VREP OPEN message. " ::= { hwDocsQamNGODEdgeDeviceEntry 8 } -- 1.3.6.1.4.1.2011.6.187.11.1.9 hwDocsQamNGODEdgeDeviceVREPID OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute identifies the VREPID value of the edge device. The VREP Identifier MUST uniquely identify this speaker/listener within its Streaming Zone. A given node MAY set the value of its VREP Identifier to an IPv4 address assigned to that device. The value of the VREP Identifier is determined on startup and MUST be the same for all peer connections. When comparing two VREP identifiers, the VREP Identifier is to be interpreted as a numerical 4-octet unsigned integer. It is recommended that NGOD components set the VREP identifier to their IPv4 address when no identifier is configured in the Nx interface When hwDocsQamNGODEdgeDeviceVREPIDMode is localip(1), this attribute can't be modified and the value is the same with hwDocsQamNGODEdgeDeviceLocalAddress. When hwDocsQamNGODEdgeDeviceVREPIDMode is integer(2), this atrribute can be configured to any integer as the VREPID. The default value is 0. " REFERENCE "Comcast-SP-NGOD-GEN-SDR-I03-100731" ::= { hwDocsQamNGODEdgeDeviceEntry 9 } -- 1.3.6.1.4.1.2011.6.187.11.1.10 hwDocsQamNGODEdgeDeviceHoldTime OBJECT-TYPE SYNTAX Unsigned32 (0 | 3..3600) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute identifies the number of seconds that the edge device proposes for the value of the Hold Timer. Upon receipt of an OPEN message, a VREP speaker or listener MUST calculate the value of the Hold Timer by using the smaller of its configured Hold Time and the Hold Time received in the OPEN message. The Hold Time MUST be either zero or at least three seconds. The calculated value indicates the maximum number of seconds that may elapse between the receipt of successive KEEPALIVE and/or UPDATE messages by the sender. If the Hold Timer is zero, then no procedures are necessary for keeping a peering session alive. The default value is 240. Unit: s. " REFERENCE "Comcast-SP-NGOD-GEN-SDR-I03-100731" ::= { hwDocsQamNGODEdgeDeviceEntry 10 } -- 1.3.6.1.4.1.2011.6.187.11.1.11 hwDocsQamNGODEdgeDeviceConnectRetry OBJECT-TYPE SYNTAX Unsigned32 (60..3600) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute identifies the expire time for the edge device to setup an TCP connection. The exact value of the ConnectRetry timer is a local matter, but should be sufficiently large to allow TCP initialization. The default value is 120 second. Unit: s. " REFERENCE "Comcast-SP-NGOD-GEN-SDR-I03-100731" ::= { hwDocsQamNGODEdgeDeviceEntry 11 } -- 1.3.6.1.4.1.2011.6.187.11.1.12 hwDocsQamNGODEdgeDeviceActive OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute identifies the state of the edge device. Set ture to active the edge device and false to deactive. The default value is false. " ::= { hwDocsQamNGODEdgeDeviceEntry 12 } -- 1.3.6.1.4.1.2011.6.187.11.1.13 hwDocsQamNGODEdgeDeviceState OBJECT-TYPE SYNTAX INTEGER { idle(1), connect(2), active(3), opensent(4), openconfirm(5), established(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the state of the edge device VREP FSM. Options: 1. idle(1) -Initially VREP is in the Idle state for each peer 2. connect(2) -In this state, an edge device is waiting for a transport protocol connection to be completed to the peer, and is listening for inbound transport connections from the peer 3. active(3) -In this state, an edge device is listening for an inbound connection from the peer, but is not in the process of initiating a connection to the peer 4. opensent(4) -In this state, an edge device has sent an OPEN message to its peer and is waiting for an OPEN message from its peer 5. openconfirm(5) -In this state, an edge device has sent an OPEN to its peer, received an OPEN from its peer, and sent a KEEPALIVE in response to the OPEN 6. established(6) -In the Established state, an LS can exchange UPDATE, NOTIFICATION, and KEEPALIVE messages with its peer " REFERENCE "Comcast-SP-NGOD-GEN-SDR-I03-100731" ::= { hwDocsQamNGODEdgeDeviceEntry 13 } -- 1.3.6.1.4.1.2011.6.187.11.1.14 hwDocsQamNGODEdgeDeviceNegotiatedHoldTime OBJECT-TYPE SYNTAX Unsigned32 (0 | 3..3600) MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute identifies the negotiated number of seconds that the edge device proposes for the value of the Hold Timer. See hwDocsQamNGODEdgeDeviceHoldTime decription. The default value is 0. Unit: s. " REFERENCE "Comcast-SP-NGOD-GEN-SDR-I03-100731" ::= { hwDocsQamNGODEdgeDeviceEntry 14 } -- 1.3.6.1.4.1.2011.6.187.11.1.15 hwDocsQamNGODEdgeDeviceEstablishedPeerAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute identifies the IP address type of ERM peer which the edge device established a VREP session with. " ::= { hwDocsQamNGODEdgeDeviceEntry 15 } -- 1.3.6.1.4.1.2011.6.187.11.1.16 hwDocsQamNGODEdgeDeviceEstablishedPeerAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute identifies the IP address of ERM peer which the edge device established a VREP session with. When VREP session is not in established state, this value is 0. The default value is 0. " ::= { hwDocsQamNGODEdgeDeviceEntry 16 } -- 1.3.6.1.4.1.2011.6.187.11.1.17 hwDocsQamNGODEdgeDeviceEstablishedPeerPort OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute identifies the TCP port number of ERM peer which the edge device established a VREP session with. When VREP session is not in established state, this value is 0. The default value is 0. " ::= { hwDocsQamNGODEdgeDeviceEntry 17 } -- 1.3.6.1.4.1.2011.6.187.11.1.18 hwDocsQamNGODEdgeDeviceEstablishedLocalAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute identifies the IP address type of the edge device established a VREP session. " ::= { hwDocsQamNGODEdgeDeviceEntry 18 } -- 1.3.6.1.4.1.2011.6.187.11.1.19 hwDocsQamNGODEdgeDeviceEstablishedLocalAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute identifies the IP address of the edge device established a VREP session. When VREP session is not in established state, this value is 0. The default value is 0. " ::= { hwDocsQamNGODEdgeDeviceEntry 19 } -- 1.3.6.1.4.1.2011.6.187.11.1.20 hwDocsQamNGODEdgeDeviceEstablishedLocalPort OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute identifies the TCP port number of the edge device established a VREP session. When VREP session is not in established state, this value is 0. The default value is 0. " ::= { hwDocsQamNGODEdgeDeviceEntry 20 } -- 1.3.6.1.4.1.2011.6.187.11.1.21 hwDocsQamNGODEdgeDeviceCost OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute identifies the cost of the edge devie. The cost attribute is a topology independent attribute. It represents the relative cost associated with the resources from a resource manager or of a data plane component. The default value is 0. " REFERENCE "Comcast-SP-NGOD-GEN-SDR-I03-100731" ::= { hwDocsQamNGODEdgeDeviceEntry 21 } -- 1.3.6.1.4.1.2011.6.187.11.1.22 hwDocsQamNGODEdgeDevicelocalIfType OBJECT-TYPE SYNTAX INTEGER { inloopback(1), null(2), meth(3), vlanif(4), loopback(5), tunnel(6), notconfigured(255) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the interface type. Options: 1. inloopback(1) -the system inner loopback interface 2. null(2) -the NULL interface 3. meth(3) -the ethernet interface for management 4. vlanif(4) -the VLAN interface 5. loopback(5) -the loopback interface 6. tunnel(6) -the tunnel interface 7. notconfigured(255) -not configiured The interface number (hwDocsQamNGODEdgeDevicelocalIfNumber)and interface type together identify an interface. The default value is notConfigured(255), it indicates that no interface is configured. It only supports vlanif(4) and loopback(5). " ::= { hwDocsQamNGODEdgeDeviceEntry 22 } -- 1.3.6.1.4.1.2011.6.187.11.1.23 hwDocsQamNGODEdgeDevicelocalIfNumber OBJECT-TYPE SYNTAX Integer32 (-1|0..4093) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the interface number. Range: 0-4093 Range for the inloopback interface: 0 Range for the NULL interface: 0 Range for the MEth interface: 0 Range for the VLAN interface: 1-4093 Range for the loopback interface: 0-31 Range for the tunnel interface: 1-64 The interface number and interface type (hwDocsQamNGODEdgeDevicelocalIfType) together identify an interface. The default value is -1, it indicates that no interface is configured. " ::= { hwDocsQamNGODEdgeDeviceEntry 23 } -- 1.3.6.1.4.1.2011.6.187.11.1.255 hwDocsQamNGODEdgeDeviceRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row status, used to query, create, modify, and delete a edge device. It supports the active(1), createAndGo(4), and destroy(6) operations. During query, the value of this leaf is always active(1). During deletion, specify the value of this leaf to destroy(6). During creation, specify the value of this leaf to createAndGo(4). To modify the parameters of a edge device table, this leaf need not be issued together. Options: 1. active(1) -indicates the query operation 2. createAndGo(4) -indicates the creating operation 3. destroy(6) -indicates the deleting operation " ::= { hwDocsQamNGODEdgeDeviceEntry 255} -- 1.3.6.1.4.1.2011.6.187.12 hwDocsQamNGODEdgeDeviceEdgeInputTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDocsQamNGODEdgeDeviceEdgeInputEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the edge device input table. The index of this table is hwDocsQamNGODEdgeDeviceName and hwDocsQamNGODEdgeDeviceEdgeInputIndex. " ::= { hwEqamAn 12 } -- 1.3.6.1.4.1.2011.6.187.12.1 hwDocsQamNGODEdgeDeviceEdgeInputEntry OBJECT-TYPE SYNTAX HwDocsQamNGODEdgeDeviceEdgeInputEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the edge device input table. The index of this entry is hwDocsQamNGODEdgeDeviceName and hwDocsQamNGODEdgeDeviceEdgeInputIndex. " INDEX { hwDocsQamNGODEdgeDeviceName, hwDocsQamNGODEdgeDeviceEdgeInputIndex } ::= { hwDocsQamNGODEdgeDeviceEdgeInputTable 1 } HwDocsQamNGODEdgeDeviceEdgeInputEntry ::= SEQUENCE { hwDocsQamNGODEdgeDeviceEdgeInputIndex Unsigned32, hwDocsQamNGODEdgeDeviceEdgeInputAddressType InetAddressType, hwDocsQamNGODEdgeDeviceEdgeInputAddress InetAddress, hwDocsQamNGODEdgeDeviceEdgeInputAddressMask InetAddress, hwDocsQamNGODEdgeDeviceEdgeInputIfindex Unsigned32, hwDocsQamNGODEdgeDeviceEdgeInputMaxBandwidth Unsigned32, hwDocsQamNGODEdgeDeviceEdgeInputGroupName OCTET STRING, hwDocsQamNGODEdgeDeviceEdgeInputRowStatus RowStatus } -- 1.3.6.1.4.1.2011.6.187.12.1.1 hwDocsQamNGODEdgeDeviceEdgeInputIndex OBJECT-TYPE SYNTAX Unsigned32 (1..4|4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the index of the edge device input table. when set to 4294967295, the system automatically allocates an index for the instance. " ::= { hwDocsQamNGODEdgeDeviceEdgeInputEntry 1 } -- 1.3.6.1.4.1.2011.6.187.12.1.2 hwDocsQamNGODEdgeDeviceEdgeInputAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute identifies the IP address type of the edge device input host adress. " ::= { hwDocsQamNGODEdgeDeviceEdgeInputEntry 2 } -- 1.3.6.1.4.1.2011.6.187.12.1.3 hwDocsQamNGODEdgeDeviceEdgeInputAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute identifies the IP address of the edge device input host adress. " REFERENCE "Comcast-SP-NGOD-GEN-SDR-I03-100731" ::= { hwDocsQamNGODEdgeDeviceEdgeInputEntry 3 } -- 1.3.6.1.4.1.2011.6.187.12.1.4 hwDocsQamNGODEdgeDeviceEdgeInputAddressMask OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute identifies the IP address mask of the edge device input host adress. " REFERENCE "Comcast-SP-NGOD-GEN-SDR-I03-100731" ::= { hwDocsQamNGODEdgeDeviceEdgeInputEntry 4 } -- 1.3.6.1.4.1.2011.6.187.12.1.5 hwDocsQamNGODEdgeDeviceEdgeInputIfindex OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute identifies the input ifindex of the edge device input port. The ifIndex is an ifType of docsCableMaclayer(127). " REFERENCE "Comcast-SP-NGOD-GEN-SDR-I03-100731" ::= { hwDocsQamNGODEdgeDeviceEdgeInputEntry 5 } -- 1.3.6.1.4.1.2011.6.187.12.1.6 hwDocsQamNGODEdgeDeviceEdgeInputMaxBandwidth OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute identifies the max bandwidth of the edge device input port. The default value is 0. Unit: kbps. " REFERENCE "Comcast-SP-NGOD-GEN-SDR-I03-100731" ::= { hwDocsQamNGODEdgeDeviceEdgeInputEntry 6 } -- 1.3.6.1.4.1.2011.6.187.12.1.7 hwDocsQamNGODEdgeDeviceEdgeInputGroupName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..31)) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute identifies the group name of the edge device input belongs to. The default value is null string. " REFERENCE "Comcast-SP-NGOD-GEN-SDR-I03-100731" ::= { hwDocsQamNGODEdgeDeviceEdgeInputEntry 7} -- 1.3.6.1.4.1.2011.6.187.12.1.255 hwDocsQamNGODEdgeDeviceEdgeInputRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row status, used to query, create, modify, and delete a edge device input. It supports the active(1), createAndGo(4), and destroy(6) operations. During query, the value of this leaf is always active(1). During deletion, specify the value of this leaf to destroy(6). During creation, specify the value of this leaf to createAndGo(4). To modify the parameters of a device input table, this leaf need not be issued together. Options: 1. active(1) -indicates the query operation 2. createAndGo(4) -indicates the creating operation 3. destroy(6) -indicates the deleting operation " ::= { hwDocsQamNGODEdgeDeviceEdgeInputEntry 255} -- 1.3.6.1.4.1.2011.6.187.13 hwDocsQamNGODEdgeDeviceStatisticsTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDocsQamNGODEdgeDeviceStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the edge device statistics table. The index of this table is hwDocsQamNGODEdgeDeviceName. " ::= { hwEqamAn 13 } -- 1.3.6.1.4.1.2011.6.187.13.1 hwDocsQamNGODEdgeDeviceStatisticsEntry OBJECT-TYPE SYNTAX HwDocsQamNGODEdgeDeviceStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the edge device statistics table. The index of this entry is hwDocsQamNGODEdgeDeviceName. " INDEX { hwDocsQamNGODEdgeDeviceName } ::= { hwDocsQamNGODEdgeDeviceStatisticsTable 1 } HwDocsQamNGODEdgeDeviceStatisticsEntry ::= SEQUENCE { hwDocsQamNGODEdgeDeviceRecvOpenPkts Counter32, hwDocsQamNGODEdgeDeviceSentOpenPkts Counter32, hwDocsQamNGODEdgeDeviceRecvKeepalivePkts Counter32, hwDocsQamNGODEdgeDeviceSentKeepalivePkts Counter32, hwDocsQamNGODEdgeDeviceRecvNotificationPkts Counter32, hwDocsQamNGODEdgeDeviceSentNotificationPkts Counter32, hwDocsQamNGODEdgeDeviceSentUpdatePkts Counter32, hwDocsQamNGODEdgeDeviceRecvErrPkts Counter32, hwDocsQamNGODEdgeDeviceRecvMsgHeaderErrPkts Counter32, hwDocsQamNGODEdgeDeviceRecvMsgHeaderBadLengthErrPkts Counter32, hwDocsQamNGODEdgeDeviceRecvMsgHeaderBadTypeErrPkts Counter32, hwDocsQamNGODEdgeDeviceRecvOpenMsgErrPkts Counter32, hwDocsQamNGODEdgeDeviceRecvOpenMsgUnsupportedVersionErrPkts Counter32, hwDocsQamNGODEdgeDeviceRecvOpenMsgBadPeerAddressDomainErrPkts Counter32, hwDocsQamNGODEdgeDeviceRecvOpenMsgBadVREPIDErrPkts Counter32, hwDocsQamNGODEdgeDeviceRecvOpenMsgUnsupportedOptionParaErrPkts Counter32, hwDocsQamNGODEdgeDeviceRecvOpenMsgUnacceptableHoldTimeErrPkts Counter32, hwDocsQamNGODEdgeDeviceRecvOpenMsgUnsupportedCapabilityErrPkts Counter32, hwDocsQamNGODEdgeDeviceRecvOpenMsgCapabilityMissmatchErrPkts Counter32, hwDocsQamNGODEdgeDeviceStatisticsReset INTEGER, hwDocsQamNGODEdgeDeviceRecvNotificationErrPkts Counter32 } -- 1.3.6.1.4.1.2011.6.187.13.1.1 hwDocsQamNGODEdgeDeviceRecvOpenPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of OPEN packets received. " REFERENCE "Comcast-SP-NGOD-GEN-SDR-I03-100731" ::= { hwDocsQamNGODEdgeDeviceStatisticsEntry 1 } -- 1.3.6.1.4.1.2011.6.187.13.1.2 hwDocsQamNGODEdgeDeviceSentOpenPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of OPEN packets sent. " REFERENCE "Comcast-SP-NGOD-GEN-SDR-I03-100731" ::= { hwDocsQamNGODEdgeDeviceStatisticsEntry 2 } -- 1.3.6.1.4.1.2011.6.187.13.1.3 hwDocsQamNGODEdgeDeviceRecvKeepalivePkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of KEEPALIVE packets received . " REFERENCE "Comcast-SP-NGOD-GEN-SDR-I03-100731" ::= { hwDocsQamNGODEdgeDeviceStatisticsEntry 3 } -- 1.3.6.1.4.1.2011.6.187.13.1.4 hwDocsQamNGODEdgeDeviceSentKeepalivePkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of KEEPALIVE packets sent. " REFERENCE "Comcast-SP-NGOD-GEN-SDR-I03-100731" ::= { hwDocsQamNGODEdgeDeviceStatisticsEntry 4 } -- 1.3.6.1.4.1.2011.6.187.13.1.5 hwDocsQamNGODEdgeDeviceRecvNotificationPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of NOTIFICATION packets received . " REFERENCE "Comcast-SP-NGOD-GEN-SDR-I03-100731" ::= { hwDocsQamNGODEdgeDeviceStatisticsEntry 5 } -- 1.3.6.1.4.1.2011.6.187.13.1.6 hwDocsQamNGODEdgeDeviceSentNotificationPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of NOTIFICATION packets sent. " REFERENCE "Comcast-SP-NGOD-GEN-SDR-I03-100731" ::= { hwDocsQamNGODEdgeDeviceStatisticsEntry 6 } -- 1.3.6.1.4.1.2011.6.187.13.1.7 hwDocsQamNGODEdgeDeviceSentUpdatePkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of UPDATE packets sent. " REFERENCE "Comcast-SP-NGOD-GEN-SDR-I03-100731" ::= { hwDocsQamNGODEdgeDeviceStatisticsEntry 7 } -- 1.3.6.1.4.1.2011.6.187.13.1.8 hwDocsQamNGODEdgeDeviceRecvErrPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of ERROR packets received. " REFERENCE "Comcast-SP-NGOD-GEN-SDR-I03-100731" ::= { hwDocsQamNGODEdgeDeviceStatisticsEntry 8 } -- 1.3.6.1.4.1.2011.6.187.13.1.9 hwDocsQamNGODEdgeDeviceRecvMsgHeaderErrPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of message header error packets received. " REFERENCE "Comcast-SP-NGOD-GEN-SDR-I03-100731" ::= { hwDocsQamNGODEdgeDeviceStatisticsEntry 9 } -- 1.3.6.1.4.1.2011.6.187.13.1.10 hwDocsQamNGODEdgeDeviceRecvMsgHeaderBadLengthErrPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of message header bad length packets received. " REFERENCE "Comcast-SP-NGOD-GEN-SDR-I03-100731" ::= { hwDocsQamNGODEdgeDeviceStatisticsEntry 10 } -- 1.3.6.1.4.1.2011.6.187.13.1.11 hwDocsQamNGODEdgeDeviceRecvMsgHeaderBadTypeErrPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of message header bad type packets received. " REFERENCE "Comcast-SP-NGOD-GEN-SDR-I03-100731" ::= { hwDocsQamNGODEdgeDeviceStatisticsEntry 11 } -- 1.3.6.1.4.1.2011.6.187.13.1.12 hwDocsQamNGODEdgeDeviceRecvOpenMsgErrPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of OPEN message error packets received. " REFERENCE "Comcast-SP-NGOD-GEN-SDR-I03-100731" ::= { hwDocsQamNGODEdgeDeviceStatisticsEntry 12 } -- 1.3.6.1.4.1.2011.6.187.13.1.13 hwDocsQamNGODEdgeDeviceRecvOpenMsgUnsupportedVersionErrPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of OPEN message unsupported versionError error packets received. " REFERENCE "Comcast-SP-NGOD-GEN-SDR-I03-100731" ::= { hwDocsQamNGODEdgeDeviceStatisticsEntry 13 } -- 1.3.6.1.4.1.2011.6.187.13.1.14 hwDocsQamNGODEdgeDeviceRecvOpenMsgBadPeerAddressDomainErrPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of OPEN message bad peer address domain error packets received. " REFERENCE "Comcast-SP-NGOD-GEN-SDR-I03-100731" ::= { hwDocsQamNGODEdgeDeviceStatisticsEntry 14 } -- 1.3.6.1.4.1.2011.6.187.13.1.15 hwDocsQamNGODEdgeDeviceRecvOpenMsgBadVREPIDErrPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of OPEN message VREPID error packets received. " REFERENCE "Comcast-SP-NGOD-GEN-SDR-I03-100731" ::= { hwDocsQamNGODEdgeDeviceStatisticsEntry 15 } -- 1.3.6.1.4.1.2011.6.187.13.1.16 hwDocsQamNGODEdgeDeviceRecvOpenMsgUnsupportedOptionParaErrPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of OPEN message unsupported Option parameter error packets received. " REFERENCE "Comcast-SP-NGOD-GEN-SDR-I03-100731" ::= { hwDocsQamNGODEdgeDeviceStatisticsEntry 16 } -- 1.3.6.1.4.1.2011.6.187.13.1.17 hwDocsQamNGODEdgeDeviceRecvOpenMsgUnacceptableHoldTimeErrPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of OPEN message unacceptable hold time error packets received. " REFERENCE "Comcast-SP-NGOD-GEN-SDR-I03-100731" ::= { hwDocsQamNGODEdgeDeviceStatisticsEntry 17 } -- 1.3.6.1.4.1.2011.6.187.13.1.18 hwDocsQamNGODEdgeDeviceRecvOpenMsgUnsupportedCapabilityErrPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of OPEN message unsupported capability error packets received. " REFERENCE "Comcast-SP-NGOD-GEN-SDR-I03-100731" ::= { hwDocsQamNGODEdgeDeviceStatisticsEntry 18 } -- 1.3.6.1.4.1.2011.6.187.13.1.19 hwDocsQamNGODEdgeDeviceRecvOpenMsgCapabilityMissmatchErrPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of OPEN message capability missmatch error packets received. " REFERENCE "Comcast-SP-NGOD-GEN-SDR-I03-100731" ::= { hwDocsQamNGODEdgeDeviceStatisticsEntry 19 } -- 1.3.6.1.4.1.2011.6.187.13.1.20 hwDocsQamNGODEdgeDeviceStatisticsReset OBJECT-TYPE SYNTAX INTEGER{ clear(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Rest the statistics of edge device. Options: 1. clear(1) -indicates resetingthe statistics of edge device " REFERENCE "Comcast-SP-NGOD-GEN-SDR-I03-100731" ::= { hwDocsQamNGODEdgeDeviceStatisticsEntry 20 } -- 1.3.6.1.4.1.2011.6.187.13.1.21 hwDocsQamNGODEdgeDeviceRecvNotificationErrPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of NOTIFICATION error packets received. " REFERENCE "Comcast-SP-NGOD-GEN-SDR-I03-100731" ::= { hwDocsQamNGODEdgeDeviceStatisticsEntry 21 } -- 1.3.6.1.4.1.2011.6.187.14 hwDocsQamChannelTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDocsQamChannelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the qam channel table. The index of this table is ifindex. " ::= { hwEqamAn 14 } -- 1.3.6.1.4.1.2011.6.187.14.1 hwDocsQamChannelEntry OBJECT-TYPE SYNTAX HwDocsQamChannelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the qam channel table. The index of this entry is ifindex. " INDEX { ifIndex } ::= { hwDocsQamChannelTable 1 } HwDocsQamChannelEntry ::= SEQUENCE { hwDocsQamChannelStreamID Unsigned32, hwDocsQamChannelServiceGroupName OCTET STRING, hwDocsQamChannelEdgeDeviceName OCTET STRING, hwDocsQamChannelSCSName OCTET STRING } -- 1.3.6.1.4.1.2011.6.187.14.1.1 hwDocsQamChannelStreamID OBJECT-TYPE SYNTAX Unsigned32 (0..65535 | 4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute identifies the TSID of the EQAM channel. The default value is 4294967295. " ::= { hwDocsQamChannelEntry 1 } -- 1.3.6.1.4.1.2011.6.187.14.1.2 hwDocsQamChannelServiceGroupName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..31)) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute identifies the service group of the EQAM channel belongs to. Suggested format .. The default value is null string. " REFERENCE "Comcast-SP-NGOD-GEN-SDR-I03-100731" ::= { hwDocsQamChannelEntry 2} -- 1.3.6.1.4.1.2011.6.187.14.1.3 hwDocsQamChannelEdgeDeviceName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..31)) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute identifies the egdge device of the EQAM channel belongs to. The default value is null string. " REFERENCE "Comcast-SP-NGOD-GEN-SDR-I03-100731" ::= { hwDocsQamChannelEntry 3} -- 1.3.6.1.4.1.2011.6.187.14.1.4 hwDocsQamChannelSCSName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..31)) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the name of the SCS table. The default value is null string. If the node value is set to a null string, the SCS used by the channel will be deleted. " ::= { hwDocsQamChannelEntry 4 } -- 1.3.6.1.4.1.2011.6.187.15 hwDocsQamVideoStreamMPTSProgramTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDocsQamVideoStreamMPTSProgramEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the dynamic program information table for mpts video stream. The indexes of this table are ifIndex, hwDocsQamVideoStreamIndex and hwDocsQamVideoStreamMultiProgramIndex. " ::= { hwEqamAn 15 } -- 1.3.6.1.4.1.2011.6.187.15.1 hwDocsQamVideoStreamMPTSProgramEntry OBJECT-TYPE SYNTAX HwDocsQamVideoStreamMPTSProgramEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the dynamic program information table for mpts video stream. The indexes of this entry are ifIndex, hwDocsQamVideoStreamIndex and hwDocsQamVideoStreamMultiProgramIndex. " INDEX { ifIndex, hwDocsQamVideoStreamIndex, hwDocsQamVideoStreamMPTSProgramIndex } ::= { hwDocsQamVideoStreamMPTSProgramTable 1 } HwDocsQamVideoStreamMPTSProgramEntry ::= SEQUENCE { hwDocsQamVideoStreamMPTSProgramIndex Unsigned32, hwDocsQamVideoStreamMPTSInputProgram Integer32, hwDocsQamVideoStreamMPTSInputPMTPID Integer32, hwDocsQamVideoStreamMPTSInputPCRPID Integer32, hwDocsQamVideoStreamMPTSOutputProgram Integer32, hwDocsQamVideoStreamMPTSOutputPMTPID Integer32, hwDocsQamVideoStreamMPTSOutputPCRPID Integer32, hwDocsQamVideoStreamMPTSInputESPIDList OCTET STRING, hwDocsQamVideoStreamMPTSOutputESPIDList OCTET STRING, hwDocsQamVideoStreamMPTSESTypeList OCTET STRING } -- 1.3.6.1.4.1.2011.6.187.8.15.1 hwDocsQamVideoStreamMPTSProgramIndex OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the program index of a MPTS video stream. " ::= { hwDocsQamVideoStreamMPTSProgramEntry 1 } -- 1.3.6.1.4.1.2011.6.187.8.15.2 hwDocsQamVideoStreamMPTSInputProgram OBJECT-TYPE SYNTAX Integer32 (-1 | 0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the input program ID, the value -1 indicates that the input program ID is invalid. " ::= { hwDocsQamVideoStreamMPTSProgramEntry 2 } -- 1.3.6.1.4.1.2011.6.187.8.15.3 hwDocsQamVideoStreamMPTSInputPMTPID OBJECT-TYPE SYNTAX Integer32 (-1 | 0..8191) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the input PMT PID, the value -1 indicates that the input PMT PID is invalid. " ::= { hwDocsQamVideoStreamMPTSProgramEntry 3 } -- 1.3.6.1.4.1.2011.6.187.8.15.4 hwDocsQamVideoStreamMPTSInputPCRPID OBJECT-TYPE SYNTAX Integer32 (-1 | 0..8191) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the input PCR PID, the value -1 indicates that the input PCR PID is invalid. " ::= { hwDocsQamVideoStreamMPTSProgramEntry 4 } -- 1.3.6.1.4.1.2011.6.187.8.15.5 hwDocsQamVideoStreamMPTSOutputProgram OBJECT-TYPE SYNTAX Integer32 (-1 | 0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the program ID of the output stream, the value -1 indicates that the program ID of the output stream is invalid. " ::= { hwDocsQamVideoStreamMPTSProgramEntry 5 } -- 1.3.6.1.4.1.2011.6.187.8.15.6 hwDocsQamVideoStreamMPTSOutputPMTPID OBJECT-TYPE SYNTAX Integer32 (-1 | 0..8191) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the PMT PID of the output stream, the value -1 indicates that the PMT PID of the output stream is invalid. " ::= { hwDocsQamVideoStreamMPTSProgramEntry 6 } -- 1.3.6.1.4.1.2011.6.187.8.15.7 hwDocsQamVideoStreamMPTSOutputPCRPID OBJECT-TYPE SYNTAX Integer32 (-1 | 0..8191) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the PCR PID of the output stream, the value -1 indicates that the PCR PID of the output stream is invalid. " ::= { hwDocsQamVideoStreamMPTSProgramEntry 7 } -- 1.3.6.1.4.1.2011.6.187.8.15.8 hwDocsQamVideoStreamMPTSInputESPIDList OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the ESPID list for input MPTS streams. PID consists of two bytes and must be in one-to-one mapping with ESTypeList. " ::= { hwDocsQamVideoStreamMPTSProgramEntry 8 } -- 1.3.6.1.4.1.2011.6.187.8.15.9 hwDocsQamVideoStreamMPTSOutputESPIDList OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the ESPID list for output MPTS streams. PID consists of two bytes and must be in one-to-one mapping with ESTypeList. " ::= { hwDocsQamVideoStreamMPTSProgramEntry 9 } -- 1.3.6.1.4.1.2011.6.187.8.15.10 hwDocsQamVideoStreamMPTSESTypeList OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicate the ES type list. One byte indicates a type, which must be in one-to-one mapping with the ESPID list for input or output streams. " ::= { hwDocsQamVideoStreamMPTSProgramEntry 10 } -- 1.3.6.1.4.1.2011.6.187.16 hwDocsQamInputTSTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDocsQamInputTSEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the input TS table. The index of this table is hwDocsQamInputTSIndex. " ::= { hwEqamAn 16 } -- 1.3.6.1.4.1.2011.6.187.16.1 hwDocsQamInputTSEntry OBJECT-TYPE SYNTAX HwDocsQamInputTSEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the input TS table. The index of this entry is hwDocsQamInputTSIndex. " INDEX { hwDocsQamInputTSIndex } ::= { hwDocsQamInputTSTable 1 } HwDocsQamInputTSEntry ::= SEQUENCE { hwDocsQamInputTSIndex Unsigned32, hwDocsQamInputTSIpAddressType InetAddressType, hwDocsQamInputTSMulticastIpAddress InetAddress, hwDocsQamInputTSSourceIpAddress InetAddress, hwDocsQamInputTSSecondaryMulticastIpAddress InetAddress, hwDocsQamInputTSSecondarySourceIpAddress InetAddress, hwDocsQamInputTSState INTEGER, hwDocsQamInputTSTraffic Unsigned32, hwDocsQamInputTSDiscontinuityCounter Counter64, hwDocsQamInputTSEPGInput TruthValue, hwDocsQamInputTSJitter Integer32, hwDocsQamInputTSRTPSequenceErrorCounter Counter64, hwDocsQamInputTSRedundancyMode INTEGER, hwDocsQamInputTSUdpPort InetPortNumber, hwDocsQamInputTSSecondaryUdpPort InetPortNumber, hwDocsQamInputTSMode INTEGER, hwDocsQamInputTSTransportStreamID Unsigned32, hwDocsQamInputTSRedundancyTriggers BITS, hwDocsQamInputTSRedundancyTriggersDefault TruthValue, hwDocsQamInputTSRowStatus RowStatus } -- 1.3.6.1.4.1.2011.6.187.16.1.1 hwDocsQamInputTSIndex OBJECT-TYPE SYNTAX Unsigned32 (1..65535|4294967295) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Indicates the index of a input TS. You can also fill 4294967295 and the system will automatically allocate an index. " ::= { hwDocsQamInputTSEntry 1 } -- 1.3.6.1.4.1.2011.6.187.16.1.2 hwDocsQamInputTSIpAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the address type of the multicast IP address in input TS. Only IPv4 addresses are supported. " ::= { hwDocsQamInputTSEntry 2 } -- 1.3.6.1.4.1.2011.6.187.16.1.3 hwDocsQamInputTSMulticastIpAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the multicast IP address of the input TS. " ::= { hwDocsQamInputTSEntry 3 } -- 1.3.6.1.4.1.2011.6.187.16.1.4 hwDocsQamInputTSSourceIpAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the source IP address of the input TS. " ::= { hwDocsQamInputTSEntry 4 } -- 1.3.6.1.4.1.2011.6.187.16.1.5 hwDocsQamInputTSSecondaryMulticastIpAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the secondary multicast IP address of the input TS. " ::= { hwDocsQamInputTSEntry 5 } -- 1.3.6.1.4.1.2011.6.187.16.1.6 hwDocsQamInputTSSecondarySourceIpAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the secondary source IP address of the input TS. " ::= { hwDocsQamInputTSEntry 6 } -- 1.3.6.1.4.1.2011.6.187.16.1.7 hwDocsQamInputTSState OBJECT-TYPE SYNTAX INTEGER { offline(1), online(2), unknown(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the state of input TS. Options: 1. offline(1) -indicates the offline state 2. online(2) -indicates the online state 3. unknown(3) -indicates the unknown state " ::= { hwDocsQamInputTSEntry 7 } -- 1.3.6.1.4.1.2011.6.187.16.1.8 hwDocsQamInputTSTraffic OBJECT-TYPE SYNTAX Unsigned32 UNITS "kbps" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the traffic of input TS. Default: 0 " ::= { hwDocsQamInputTSEntry 8 } -- 1.3.6.1.4.1.2011.6.187.16.1.9 hwDocsQamInputTSDiscontinuityCounter OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the discontinuity counter of input TS. Default: 0 " ::= { hwDocsQamInputTSEntry 9 } -- 1.3.6.1.4.1.2011.6.187.16.1.10 hwDocsQamInputTSEPGInput OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates whether the transport stream is treated as the EPG input. The default value is false. " ::= { hwDocsQamInputTSEntry 10 } -- 1.3.6.1.4.1.2011.6.187.16.1.11 hwDocsQamInputTSJitter OBJECT-TYPE SYNTAX Integer32(0..250) UNITS "millisecond" MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the network jitter allowed. The default value is 100. 0 indicatdes network jitter is not allowed. " ::= { hwDocsQamInputTSEntry 11 } -- 1.3.6.1.4.1.2011.6.187.16.1.12 hwDocsQamInputTSRTPSequenceErrorCounter OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the RTP sequence error counter of input TS. " ::= { hwDocsQamInputTSEntry 12 } -- 1.3.6.1.4.1.2011.6.187.16.1.13 hwDocsQamInputTSRedundancyMode OBJECT-TYPE SYNTAX INTEGER { backup(1), seamless(2), invalid(255) } MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the redundancy mode of input TS. Options: 1. backup(1) -Indicates the redundancy mode in which one TS is selected from two input TSs. When the secondary multicast IP address is valid and the protection mode is not configured, the default redundancy mode is backup. 2. seamless(2) -Indicates that two input TSs are merged into one output TS, which is complete. 3. invalid(255)-Indicates that the secondary multicast IP address is not configured and the redundancy mode is not used. " ::= { hwDocsQamInputTSEntry 13 } -- 1.3.6.1.4.1.2011.6.187.16.1.14 hwDocsQamInputTSUdpPort OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the UDP port number of the input TS. The default value is 0, indicating that the UDP port number is invalid. Range: 0-65535 " ::= { hwDocsQamInputTSEntry 14 } -- 1.3.6.1.4.1.2011.6.187.16.1.15 hwDocsQamInputTSSecondaryUdpPort OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the secondary UDP port number of the input TS. The default value is 0, indicating that the UDP port number is invalid. Range: 0-65535 " ::= { hwDocsQamInputTSEntry 15 } -- 1.3.6.1.4.1.2011.6.187.16.1.16 hwDocsQamInputTSMode OBJECT-TYPE SYNTAX INTEGER { dvb(1), mpeg(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the PSI parsing mode of an input TS.The default value is dvb(1). Options: 1. dvb(1) - The PSI parsing mode is dvb. 2. mpeg(2)- The PSI parsing mode is mpeg. " ::= { hwDocsQamInputTSEntry 16 } -- 1.3.6.1.4.1.2011.6.187.16.1.17 hwDocsQamInputTSTransportStreamID OBJECT-TYPE SYNTAX Unsigned32(0..65535|4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the transport stream id of an input TS .The default value is 4294967295, which indicates that stream id is not learned. " ::= { hwDocsQamInputTSEntry 17 } -- 1.3.6.1.4.1.2011.6.187.16.1.18 hwDocsQamInputTSRedundancyTriggers OBJECT-TYPE SYNTAX BITS { nobitrate(0), nosignal(1), patmissing(2), pmtmissing(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the trigger conditions for protection switching on input TSs. The format is 4 bits. The default value is 0, indicates that there is no trigger condition for protection switching. Bit 0 -indicates that the trigger condition is no-bitrate. Bit 1 -indicates that the trigger condition is no-signal. Bit 2 -indicates that the trigger condition is pat-missing. Bit 3 -indicates that the trigger condition is pmt-missing. " ::= { hwDocsQamInputTSEntry 18 } -- 1.3.6.1.4.1.2011.6.187.16.1.19 hwDocsQamInputTSRedundancyTriggersDefault OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates whether the default trigger condition is used for protection switching. The default value is true, indicates that the trigger condition of hwDocsQamInputTSDefaultSwitchoverTriggers is used when the value is true. " ::= { hwDocsQamInputTSEntry 19 } -- 1.3.6.1.4.1.2011.6.187.16.1.255 hwDocsQamInputTSRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row status, used to query, create, modify, and delete a input TS table. It supports the active(1), createAndGo(4), and destroy(6) operations. During query, the value of this leaf is always active(1). During deletion, specify the value of this leaf to destroy(6). During creation, specify the value of this leaf to createAndGo(4). To modify the parameters of a channel profile table, this leaf need not be issued together. Options: 1. active(1) -indicates the query operation 2. createAndGo(4) -indicates the creating operation 3. destroy(6) -indicates the deleting operation " ::= { hwDocsQamInputTSEntry 255 } -- 1.3.6.1.4.1.2011.6.187.17 hwDocsQamDVBDomainTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDocsQamDVBDomainEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the DVB video domain table used to manage information, such as EQAM's profile name. The index of this table is hwDocsQamDVBDomainName. " ::= { hwEqamAn 17 } -- 1.3.6.1.4.1.2011.6.187.17.1 hwDocsQamDVBDomainEntry OBJECT-TYPE SYNTAX HwDocsQamDVBDomainEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the DVB video domain table used to manage information, such as EQAM's profile name. The index of this entry is hwDocsQamDVBDomainName. " INDEX { hwDocsQamDVBDomainName } ::= { hwDocsQamDVBDomainTable 1 } HwDocsQamDVBDomainEntry ::= SEQUENCE { hwDocsQamDVBDomainName OCTET STRING, hwDocsQamDVBDomainBindVideoProfile OCTET STRING, hwDocsQamDVBDomainRowStatus RowStatus, hwDocsQamDVBDomainPSISIDefModeSDTA HwEqamPsiPolicyDvbDomain, hwDocsQamDVBDomainPSISIDefModeSDTO HwEqamPsiPolicyDvbDomain, hwDocsQamDVBDomainPSISIDefModeEITpfA HwEqamPsiPolicyDvbDomain, hwDocsQamDVBDomainPSISIDefModeEITpfO HwEqamPsiPolicyDvbDomain, hwDocsQamDVBDomainPSISIDefModeEITsFirstA HwEqamPsiPolicyDvbDomain, hwDocsQamDVBDomainPSISIDefModeEITsFirstO HwEqamPsiPolicyDvbDomain, hwDocsQamDVBDomainPSISIDefModeEITsSecondA HwEqamPsiPolicyDvbDomain, hwDocsQamDVBDomainPSISIDefModeEITsSecondO HwEqamPsiPolicyDvbDomain, hwDocsQamDVBDomainPSISIDefIntervalPAT Integer32, hwDocsQamDVBDomainPSISIDefIntervalPMT Integer32, hwDocsQamDVBDomainPSISIDefIntervalSDTA Integer32, hwDocsQamDVBDomainPSISIDefIntervalSDTO Integer32, hwDocsQamDVBDomainPSISIDefIntervalEITpfA Integer32, hwDocsQamDVBDomainPSISIDefIntervalEITpfO Integer32, hwDocsQamDVBDomainPSISIDefIntervalEITsFirstA Integer32, hwDocsQamDVBDomainPSISIDefIntervalEITsFirstO Integer32, hwDocsQamDVBDomainPSISIDefIntervalEITsSecondA Integer32, hwDocsQamDVBDomainPSISIDefIntervalEITsSecondO Integer32, hwDocsQamDVBDomainPSISIDefSpeedEIT Integer32, hwDocsQamDVBDomainDefChannelOutputRate Unsigned32 } -- 1.3.6.1.4.1.2011.6.187.17.1.1 hwDocsQamDVBDomainName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..15)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the DVB video domain name. " ::= { hwDocsQamDVBDomainEntry 1 } -- 1.3.6.1.4.1.2011.6.187.17.1.2 hwDocsQamDVBDomainBindVideoProfile OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..15)) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the bind video profile name. " ::= { hwDocsQamDVBDomainEntry 2 } -- 1.3.6.1.4.1.2011.6.187.17.1.3 hwDocsQamDVBDomainRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row status, used to query, create, and delete a DVB domain table. It supports the active(1), createAndGo(4), and destroy(6) operations. During query, the value of this leaf is always active(1). During deletion, specify the value of this leaf to destroy(6). During creation, specify the value of this leaf to createAndGo(4). Options: 1. active(1) -indicates the query operation 2. createAndGo(4) -indicates the creating operation 3. destroy(6) -indicates the deleting operation " ::= { hwDocsQamDVBDomainEntry 3 } -- 1.3.6.1.4.1.2011.6.187.17.1.4 hwDocsQamDVBDomainPSISIDefModeSDTA OBJECT-TYPE SYNTAX HwEqamPsiPolicyDvbDomain MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the output policy of SDT(Service Information Table) actual. The default value is stop(1). " ::= { hwDocsQamDVBDomainEntry 4 } -- 1.3.6.1.4.1.2011.6.187.17.1.5 hwDocsQamDVBDomainPSISIDefModeSDTO OBJECT-TYPE SYNTAX HwEqamPsiPolicyDvbDomain MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the output policy of SDT(Service Information Table) other. The default value is stop(1). " ::= { hwDocsQamDVBDomainEntry 5 } -- 1.3.6.1.4.1.2011.6.187.17.1.6 hwDocsQamDVBDomainPSISIDefModeEITpfA OBJECT-TYPE SYNTAX HwEqamPsiPolicyDvbDomain MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the output policy of actual TS, present/following EIT(Event Information Table). The default value is stop(1). " ::= { hwDocsQamDVBDomainEntry 6 } -- 1.3.6.1.4.1.2011.6.187.17.1.7 hwDocsQamDVBDomainPSISIDefModeEITpfO OBJECT-TYPE SYNTAX HwEqamPsiPolicyDvbDomain MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the output policy of other TS, present/following EIT(Event Information Table). The default value is stop(1). " ::= { hwDocsQamDVBDomainEntry 7 } -- 1.3.6.1.4.1.2011.6.187.17.1.8 hwDocsQamDVBDomainPSISIDefModeEITsFirstA OBJECT-TYPE SYNTAX HwEqamPsiPolicyDvbDomain MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the output policy of actual TS, first(day 0-3) schedual EIT(Event Information Table). The default value is stop(1). " ::= { hwDocsQamDVBDomainEntry 8 } -- 1.3.6.1.4.1.2011.6.187.17.1.9 hwDocsQamDVBDomainPSISIDefModeEITsFirstO OBJECT-TYPE SYNTAX HwEqamPsiPolicyDvbDomain MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the output policy of other TS, first(day 0-3) schedual EIT(Event Information Table). The default value is stop(1). " ::= { hwDocsQamDVBDomainEntry 9 } -- 1.3.6.1.4.1.2011.6.187.17.1.10 hwDocsQamDVBDomainPSISIDefModeEITsSecondA OBJECT-TYPE SYNTAX HwEqamPsiPolicyDvbDomain MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the output policy of actual TS, second(day 4-7) schedual EIT(Event Information Table). The default value is stop(1). " ::= { hwDocsQamDVBDomainEntry 10 } -- 1.3.6.1.4.1.2011.6.187.17.1.11 hwDocsQamDVBDomainPSISIDefModeEITsSecondO OBJECT-TYPE SYNTAX HwEqamPsiPolicyDvbDomain MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the output policy of other TS, second(day 4-7) schedual EIT(Event Information Table). The default value is stop(1). " ::= { hwDocsQamDVBDomainEntry 11 } -- 1.3.6.1.4.1.2011.6.187.17.1.12 hwDocsQamDVBDomainPSISIDefIntervalPAT OBJECT-TYPE SYNTAX Integer32(30..1000) UNITS "millisecond" MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the playout interval of PAT(Program Association Table). Default: 100 " ::= { hwDocsQamDVBDomainEntry 12 } -- 1.3.6.1.4.1.2011.6.187.17.1.13 hwDocsQamDVBDomainPSISIDefIntervalPMT OBJECT-TYPE SYNTAX Integer32(30..1000) UNITS "millisecond" MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the playout interval of PMT(Program Map Table). Default: 100 " ::= { hwDocsQamDVBDomainEntry 13 } -- 1.3.6.1.4.1.2011.6.187.17.1.14 hwDocsQamDVBDomainPSISIDefIntervalSDTA OBJECT-TYPE SYNTAX Integer32(25..2000) UNITS "millisecond" MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the playout interval of SDT(Service Information Table) actual. Default: 1000 " ::= { hwDocsQamDVBDomainEntry 14 } -- 1.3.6.1.4.1.2011.6.187.17.1.15 hwDocsQamDVBDomainPSISIDefIntervalSDTO OBJECT-TYPE SYNTAX Integer32(25..10000) UNITS "millisecond" MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the playout interval of SDT(Service Information Table) other. Default: 2000 " ::= { hwDocsQamDVBDomainEntry 15 } -- 1.3.6.1.4.1.2011.6.187.17.1.16 hwDocsQamDVBDomainPSISIDefIntervalEITpfA OBJECT-TYPE SYNTAX Integer32(5000..10000) UNITS "millisecond" MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the playout interval of actual TS, present/following EIT(Event Information Table). Default: 5000 " ::= { hwDocsQamDVBDomainEntry 16 } -- 1.3.6.1.4.1.2011.6.187.17.1.17 hwDocsQamDVBDomainPSISIDefIntervalEITpfO OBJECT-TYPE SYNTAX Integer32(5000..20000) UNITS "millisecond" MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the playout interval of other TS, present/following EIT(Event Information Table). Default: 20000 " ::= { hwDocsQamDVBDomainEntry 17 } -- 1.3.6.1.4.1.2011.6.187.17.1.18 hwDocsQamDVBDomainPSISIDefIntervalEITsFirstA OBJECT-TYPE SYNTAX Integer32(4000..150000) UNITS "millisecond" MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the playout interval of actual TS, first(day 0-3) schedual EIT(Event Information Table). Default: 60000 " ::= { hwDocsQamDVBDomainEntry 18 } -- 1.3.6.1.4.1.2011.6.187.17.1.19 hwDocsQamDVBDomainPSISIDefIntervalEITsFirstO OBJECT-TYPE SYNTAX Integer32(4000..1000000) UNITS "millisecond" MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the playout interval of other TS, first(day 0-3) schedual EIT(Event Information Table). Default: 600000 " ::= { hwDocsQamDVBDomainEntry 19 } -- 1.3.6.1.4.1.2011.6.187.17.1.20 hwDocsQamDVBDomainPSISIDefIntervalEITsSecondA OBJECT-TYPE SYNTAX Integer32(25000..1500000) UNITS "millisecond" MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the playout interval of actual TS, second(day 4-7) schedual EIT(Event Information Table). Default: 600000 " ::= { hwDocsQamDVBDomainEntry 20 } -- 1.3.6.1.4.1.2011.6.187.17.1.21 hwDocsQamDVBDomainPSISIDefIntervalEITsSecondO OBJECT-TYPE SYNTAX Integer32(25000..3600000) UNITS "millisecond" MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the playout interval of other TS, second(day 4-7) schedual EIT(Event Information Table). Default: 1800000 " ::= { hwDocsQamDVBDomainEntry 21 } -- 1.3.6.1.4.1.2011.6.187.17.1.22 hwDocsQamDVBDomainPSISIDefSpeedEIT OBJECT-TYPE SYNTAX Integer32(100..4000) UNITS "kbps" MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the output speed of EIT(Event Information Table). Default: 1000 " ::= { hwDocsQamDVBDomainEntry 22 } -- 1.3.6.1.4.1.2011.6.187.17.1.23 hwDocsQamDVBDomainDefChannelOutputRate OBJECT-TYPE SYNTAX Unsigned32(0..10000000) UNITS "kbps" MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the default output rate of the channel in the DVB domain. Default: 38015 " ::= { hwDocsQamDVBDomainEntry 23 } -- 1.3.6.1.4.1.2011.6.187.18 hwDocsQamVODPortConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDocsQamVODPortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the VOD domain port table used to manage relationships between VOD domains and ports. The index of this table is ifIndex. " ::= { hwEqamAn 18 } -- 1.3.6.1.4.1.2011.6.187.18.1 hwDocsQamVODPortConfigEntry OBJECT-TYPE SYNTAX HwDocsQamVODPortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the VOD domain port table used to manage relationships between VOD domains and ports. The index of this entry is ifIndex. " INDEX { ifIndex } ::= { hwDocsQamVODPortConfigTable 1 } HwDocsQamVODPortConfigEntry ::= SEQUENCE { hwDocsQamVODPortConfigDomainName OCTET STRING, hwDocsQamVODPortConfigStartUDPPort InetPortNumber, hwDocsQamVODPortConfigRowStatus RowStatus } -- 1.3.6.1.4.1.2011.6.187.18.1.1 hwDocsQamVODPortConfigDomainName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..15)) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the VOD domain name. " ::= { hwDocsQamVODPortConfigEntry 1 } -- 1.3.6.1.4.1.2011.6.187.18.1.2 hwDocsQamVODPortConfigStartUDPPort OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the start udp value of port. " ::= { hwDocsQamVODPortConfigEntry 2 } -- 1.3.6.1.4.1.2011.6.187.18.1.3 hwDocsQamVODPortConfigRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row status, used to query, create, modify, and delete a port table. It supports the active(1), createAndGo(4), and destroy(6) operations. During query, the value of this leaf is always active(1). During deletion, specify the value of this leaf to destroy(6). During creation, specify the value of this leaf to createAndGo(4). To modify the parameters of a channel profile table, this leaf need not be issued together. Options: 1. active(1) -indicates the query operation 2. createAndGo(4) -indicates the creating operation 3. destroy(6) -indicates the deleting operation " ::= { hwDocsQamVODPortConfigEntry 3} -- 1.3.6.1.4.1.2011.6.187.19 hwDocsQamDVBPortConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDocsQamDVBPortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the DVB domain port table used to manage relationships between DVB domains and ports. The index of this table is ifIndex. " ::= { hwEqamAn 19 } -- 1.3.6.1.4.1.2011.6.187.19.1 hwDocsQamDVBPortConfigEntry OBJECT-TYPE SYNTAX HwDocsQamDVBPortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the DVB domain port table used to manage relationships between DVB domains and ports. The index of this entry is ifIndex. " INDEX { ifIndex } ::= { hwDocsQamDVBPortConfigTable 1 } HwDocsQamDVBPortConfigEntry ::= SEQUENCE { hwDocsQamDVBPortConfigDomainName OCTET STRING, hwDocsQamDVBPortConfigRowStatus RowStatus } -- 1.3.6.1.4.1.2011.6.187.19.1.1 hwDocsQamDVBPortConfigDomainName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..15)) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the DVB domain name. " ::= { hwDocsQamDVBPortConfigEntry 1 } -- 1.3.6.1.4.1.2011.6.187.19.1.2 hwDocsQamDVBPortConfigRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row status, used to query, create, modify, and delete a port table. It supports the active(1), createAndGo(4), and destroy(6) operations. During query, the value of this leaf is always active(1). During deletion, specify the value of this leaf to destroy(6). During creation, specify the value of this leaf to createAndGo(4). To modify the parameters of a channel profile table, this leaf need not be issued together. Options: 1. active(1) -indicates the query operation 2. createAndGo(4) -indicates the creating operation 3. destroy(6) -indicates the deleting operation " ::= { hwDocsQamDVBPortConfigEntry 2} -- 1.3.6.1.4.1.2011.6.187.20 hwDocsQamInputTSStateTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDocsQamInputTSStateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the EQAM TS state. The index of this table is hwDocsQamInputTSIndex. " ::= { hwEqamAn 20 } -- 1.3.6.1.4.1.2011.6.187.20.1 hwDocsQamInputTSStateEntry OBJECT-TYPE SYNTAX HwDocsQamInputTSStateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the EQAM TS state. The index of this entry is hwDocsQamInputTSIndex. " INDEX { hwDocsQamInputTSIndex } ::= { hwDocsQamInputTSStateTable 1 } HwDocsQamInputTSStateEntry ::= SEQUENCE { hwDocsQamInputTSStateSwitchOver INTEGER, hwDocsQamInputTSStateActive INTEGER, hwDocsQamInputTSStateSwitchoverReason INTEGER } -- 1.3.6.1.4.1.2011.6.187.20.1 hwDocsQamInputTSStateSwitchOver OBJECT-TYPE SYNTAX INTEGER { switchover(1), none(255) } MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the opeartion for swiching over, the default value is none(255). Options: 1. switchover(1) -switch over the input TS. 2. none(255) -no operation. " ::= { hwDocsQamInputTSStateEntry 1 } -- 1.3.6.1.4.1.2011.6.187.20.2 hwDocsQamInputTSStateActive OBJECT-TYPE SYNTAX INTEGER { primary(1), secondary(2), none(255) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the active state of input TS. Options: 1. primary(1) -indicates the active state of the input TS is primary. 2. secondary(2) -indicates the active state of the input TS is secondary. 3. none(255) -indicates it is not a redundancy input TS. " ::= { hwDocsQamInputTSStateEntry 2 } -- 1.3.6.1.4.1.2011.6.187.20.3 hwDocsQamInputTSStateSwitchoverReason OBJECT-TYPE SYNTAX INTEGER { manual(1), nobitrate(2), nosignal(3), patmissing(4), pmtmissing(5), none(255) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the protection switching cause, the default value is none(255). Options: 1. manual(1) -indicates the protection switching cause is manual switching. 2. nobitrate(2) -indicates switching is triggered because no bit rate. 3. nosignal(3) -indicates switching is triggered because no signals. 4. patmissing(4) -indicates switching is triggered because of PAT missing. 5. pmtmissing(5) -indicates switching is triggered because of PMT missing. 6. none(255) -indicates no switching occurs. " ::= { hwDocsQamInputTSStateEntry 3 } -- 1.3.6.1.4.1.2011.6.187.21 hwDocsQamInputTSProgramTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDocsQamInputTSProgramEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the program information of input TS. The indexes of this table are hwDocsQamInputTSIndex and hwDocsQamInputTSProgramIndex. " ::= { hwEqamAn 21 } -- 1.3.6.1.4.1.2011.6.187.21.1 hwDocsQamInputTSProgramEntry OBJECT-TYPE SYNTAX HwDocsQamInputTSProgramEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the program information of input TS. The indexes of this entry are hwDocsQamInputTSIndex and hwDocsQamInputTSProgramIndex. " INDEX { hwDocsQamInputTSIndex, hwDocsQamInputTSProgramIndex } ::= { hwDocsQamInputTSProgramTable 1 } HwDocsQamInputTSProgramEntry ::= SEQUENCE { hwDocsQamInputTSProgramIndex Unsigned32, hwDocsQamInputTSProgramID Integer32, hwDocsQamInputTSProgramPMTPID Integer32, hwDocsQamInputTSProgramPCRPID Integer32, hwDocsQamInputTSProgramESPIDList OCTET STRING, hwDocsQamInputTSProgramESTypeList OCTET STRING, hwDocsQamInputTSProgramDiscontinuityCounter Counter64, hwDocsQamInputTSProgramName OCTET STRING, hwDocsQamInputTSProgramState INTEGER, hwDocsQamInputTSProgramRate Unsigned32, hwDocsQamInputTSProgramMaxRate Unsigned32, hwDocsQamInputTSProgramMinRate Unsigned32, hwDocsQamInputTSProgramCaNumber Unsigned32, hwDocsQamInputTSProgramCaPIDList OCTET STRING, hwDocsQamInputTSProgramCaSystemIDList OCTET STRING } -- 1.3.6.1.4.1.2011.6.187.21.1.1 hwDocsQamInputTSProgramIndex OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the index of a program in input TS. " ::= { hwDocsQamInputTSProgramEntry 1 } -- 1.3.6.1.4.1.2011.6.187.21.1.2 hwDocsQamInputTSProgramID OBJECT-TYPE SYNTAX Integer32 (-1|0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the program ID , the value -1 indicates that the program ID is invalid. " ::= { hwDocsQamInputTSProgramEntry 2 } -- 1.3.6.1.4.1.2011.6.187.21.1.3 hwDocsQamInputTSProgramPMTPID OBJECT-TYPE SYNTAX Integer32 (-1|0..8191) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the PMT PID, the value -1 indicates that the PMT PID is invalid. " ::= { hwDocsQamInputTSProgramEntry 3 } -- 1.3.6.1.4.1.2011.6.187.21.1.4 hwDocsQamInputTSProgramPCRPID OBJECT-TYPE SYNTAX Integer32 (-1|0..8191) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the PCR PID, the value -1 indicates that the PCR PID is invalid. " ::= { hwDocsQamInputTSProgramEntry 4 } -- 1.3.6.1.4.1.2011.6.187.21.1.5 hwDocsQamInputTSProgramESPIDList OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the ESPID list. PID consists of two bytes and must be in one-to-one mapping with ESTypeList. " ::= { hwDocsQamInputTSProgramEntry 5 } -- 1.3.6.1.4.1.2011.6.187.21.1.6 hwDocsQamInputTSProgramESTypeList OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicate the ES type list. One byte indicates a type, which must be in one-to-one mapping with the ESPID list for program. " ::= { hwDocsQamInputTSProgramEntry 6 } -- 1.3.6.1.4.1.2011.6.187.21.1.7 hwDocsQamInputTSProgramDiscontinuityCounter OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the discontinuity counter of program. Default: 0 " ::= { hwDocsQamInputTSProgramEntry 7 } -- 1.3.6.1.4.1.2011.6.187.21.1.8 hwDocsQamInputTSProgramName OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..63)) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the program name in input TS. " ::= { hwDocsQamInputTSProgramEntry 8 } -- 1.3.6.1.4.1.2011.6.187.21.1.9 hwDocsQamInputTSProgramState OBJECT-TYPE SYNTAX INTEGER { offline(1), online(2), unknown(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the program state in input TS. Options: 1. offline(1) -indicates the offline state 2. online(2) -indicates the online state 3. unknown(3) -indicates the unknown state The default value is offline(1). " ::= { hwDocsQamInputTSProgramEntry 9 } -- 1.3.6.1.4.1.2011.6.187.21.1.10 hwDocsQamInputTSProgramRate OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) UNITS "kbps" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the rate of program in input TS. Unit: kbit/s. The default value is 0. " ::= { hwDocsQamInputTSProgramEntry 10 } -- 1.3.6.1.4.1.2011.6.187.21.1.11 hwDocsQamInputTSProgramMaxRate OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) UNITS "kbps" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the maximum rate of program in input TS. Unit: kbit/s. The default value is 0. " ::= { hwDocsQamInputTSProgramEntry 11 } -- 1.3.6.1.4.1.2011.6.187.21.1.12 hwDocsQamInputTSProgramMinRate OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) UNITS "kbps" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the minimum rate of program in input TS. Unit: kbit/s. The default value is 0. " ::= { hwDocsQamInputTSProgramEntry 12 } -- 1.3.6.1.4.1.2011.6.187.21.1.13 hwDocsQamInputTSProgramCaNumber OBJECT-TYPE SYNTAX Unsigned32 (0..4) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the CA number of program in input TS. " ::= { hwDocsQamInputTSProgramEntry 13 } -- 1.3.6.1.4.1.2011.6.187.21.1.14 hwDocsQamInputTSProgramCaPIDList OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..8)) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the CA PID list of an input program. A PID is displayed as a 2-byte string in network order. A maximum of 4 CAs are supported. The default value is null string. " ::= { hwDocsQamInputTSProgramEntry 14 } -- 1.3.6.1.4.1.2011.6.187.21.1.15 hwDocsQamInputTSProgramCaSystemIDList OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..8)) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the CA system ID list of an input program. A CA system ID is displayed as a 2-byte string in network order. A maximum of 4 CAs are supported. The default value is null string. " ::= { hwDocsQamInputTSProgramEntry 15 } -- 1.3.6.1.4.1.2011.6.187.22 hwDocsQamOutputTSProgramTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDocsQamOutputTSProgramEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the program information of output TS. The indexes of this table are ifIndex and hwDocsQamOutputTSProgramIndex. " ::= { hwEqamAn 22 } -- 1.3.6.1.4.1.2011.6.187.22.1 hwDocsQamOutputTSProgramEntry OBJECT-TYPE SYNTAX HwDocsQamOutputTSProgramEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the program information of output TS. The indexes of this entry are ifIndex and hwDocsQamOutputTSProgramIndex. " INDEX { ifIndex, hwDocsQamOutputTSProgramIndex } ::= { hwDocsQamOutputTSProgramTable 1 } HwDocsQamOutputTSProgramEntry ::= SEQUENCE { hwDocsQamOutputTSProgramIndex Unsigned32, hwDocsQamOutputTSProgramID Integer32, hwDocsQamOutputTSProgramPMTPID Integer32, hwDocsQamOutputTSProgramPCRPID Integer32, hwDocsQamOutputTSProgramESPIDList OCTET STRING, hwDocsQamOutputTSProgramESTypeList OCTET STRING, hwDocsQamOutputTSProgramName OCTET STRING, hwDocsQamOutputTSProgramState INTEGER, hwDocsQamOutputTSProgramRate Unsigned32, hwDocsQamOutputTSProgramMaxRate Unsigned32, hwDocsQamOutputTSProgramMinRate Unsigned32, hwDocsQamOutputTSProgramCaNumber Unsigned32, hwDocsQamOutputTSProgramCaPIDList OCTET STRING, hwDocsQamOutputTSProgramCaSystemIDList OCTET STRING } -- 1.3.6.1.4.1.2011.6.187.22.1.1 hwDocsQamOutputTSProgramIndex OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the index of a program in output TS. " ::= { hwDocsQamOutputTSProgramEntry 1 } -- 1.3.6.1.4.1.2011.6.187.22.1.2 hwDocsQamOutputTSProgramID OBJECT-TYPE SYNTAX Integer32 (-1|0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the program ID , the value -1 indicates that the program ID is invalid. " ::= { hwDocsQamOutputTSProgramEntry 2 } -- 1.3.6.1.4.1.2011.6.187.22.1.3 hwDocsQamOutputTSProgramPMTPID OBJECT-TYPE SYNTAX Integer32 (-1|0..8191) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the PMT PID, the value -1 indicates that the PMT PID is invalid. " ::= { hwDocsQamOutputTSProgramEntry 3 } -- 1.3.6.1.4.1.2011.6.187.22.1.4 hwDocsQamOutputTSProgramPCRPID OBJECT-TYPE SYNTAX Integer32 (-1|0..8191) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the PCR PID, the value -1 indicates that the PCR PID is invalid. " ::= { hwDocsQamOutputTSProgramEntry 4 } -- 1.3.6.1.4.1.2011.6.187.22.1.5 hwDocsQamOutputTSProgramESPIDList OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the ESPID list. PID consists of two bytes and must be in one-to-one mapping with ESTypeList. " ::= { hwDocsQamOutputTSProgramEntry 5 } -- 1.3.6.1.4.1.2011.6.187.22.1.6 hwDocsQamOutputTSProgramESTypeList OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicate the ES type list. One byte indicates a type, which must be in one-to-one mapping with the ESPID list for program. " ::= { hwDocsQamOutputTSProgramEntry 6 } -- 1.3.6.1.4.1.2011.6.187.22.1.7 hwDocsQamOutputTSProgramName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..63)) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicate the program name in output TS. " ::= { hwDocsQamOutputTSProgramEntry 7 } -- 1.3.6.1.4.1.2011.6.187.22.1.8 hwDocsQamOutputTSProgramState OBJECT-TYPE SYNTAX INTEGER { offline(1), online(2), unknown(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicate the state of program in output TS. Options: 1. offline(1) -indicates the offline state 2. online(2) -indicates the online state 3. unknown(3) -indicates the unknown state The default value is offline(1). " ::= { hwDocsQamOutputTSProgramEntry 8 } -- 1.3.6.1.4.1.2011.6.187.22.1.9 hwDocsQamOutputTSProgramRate OBJECT-TYPE SYNTAX Unsigned32(0..4294967295) UNITS "kbps" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicate the rate of program in output TS. Unit: kbit/s. The default value is 0. " ::= { hwDocsQamOutputTSProgramEntry 9 } -- 1.3.6.1.4.1.2011.6.187.22.1.10 hwDocsQamOutputTSProgramMaxRate OBJECT-TYPE SYNTAX Unsigned32(0..4294967295) UNITS "kbps" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicate the maximum rate of program in output TS. Unit: kbit/s. The default value is 0. " ::= { hwDocsQamOutputTSProgramEntry 10 } -- 1.3.6.1.4.1.2011.6.187.22.1.11 hwDocsQamOutputTSProgramMinRate OBJECT-TYPE SYNTAX Unsigned32(0..4294967295) UNITS "kbps" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicate the minimum rate of program in output TS. Unit: kbit/s. The default value is 0. " ::= { hwDocsQamOutputTSProgramEntry 11 } -- 1.3.6.1.4.1.2011.6.187.22.1.12 hwDocsQamOutputTSProgramCaNumber OBJECT-TYPE SYNTAX Unsigned32(0..4) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicate the CA number of program in output TS. " ::= { hwDocsQamOutputTSProgramEntry 12 } -- 1.3.6.1.4.1.2011.6.187.22.1.13 hwDocsQamOutputTSProgramCaPIDList OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..8)) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the CA PID list of an output program. A PID is displayed as a 2-byte string in network order. A maximum of 4 CAs are supported. " ::= { hwDocsQamOutputTSProgramEntry 13 } -- 1.3.6.1.4.1.2011.6.187.22.1.14 hwDocsQamOutputTSProgramCaSystemIDList OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..8)) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the CA system ID list of an output program. A CA system ID is displayed as a 2-byte string in network order. A maximum of 4 CAs are supported. " ::= { hwDocsQamOutputTSProgramEntry 14 } -- 1.3.6.1.4.1.2011.6.187.23 hwDocsQamDVBInputTSStatisticsTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDocsQamDVBInputTSStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the statistics table for input TS. The index of this table is hwDocsQamDVBInputTSStatisticsIndex. " ::= { hwEqamAn 23 } -- 1.3.6.1.4.1.2011.6.187.23.1 hwDocsQamDVBInputTSStatisticsEntry OBJECT-TYPE SYNTAX HwDocsQamDVBInputTSStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the statistics table for input TS. The index of this entry is hwDocsQamDVBInputTSStatisticsIndex. " INDEX { hwDocsQamDVBInputTSStatisticsIndex } ::= { hwDocsQamDVBInputTSStatisticsTable 1 } HwDocsQamDVBInputTSStatisticsEntry ::= SEQUENCE { hwDocsQamDVBInputTSStatisticsIndex Unsigned32, hwDocsQamDVBInputTSStatisticsOperMode INTEGER, hwDocsQamDVBInputTSPackets Counter64, hwDocsQamDVBInputTSCountOfJitterOverflow Counter64, hwDocsQamDVBInputTSCountOfJitterUnderflow Counter64, hwDocsQamDVBInputTSDiscontinuityCounter Counter64, hwDocsQamDVBInputTSRTPSequenceErrorCounter Counter64, hwDocsQamDVBInputTSPATErrors Counter64, hwDocsQamDVBInputTSPATMissings Counter64, hwDocsQamDVBInputTSPMTErrors Counter64, hwDocsQamDVBInputTSPMTMissings Counter64, hwDocsQamDVBInputTSOriginalPrimaryRTPSequenceErrorCounter Counter64, hwDocsQamDVBInputTSOriginalSecondaryRTPSequenceErrorCounter Counter64, hwDocsQamDVBInputTSSeamlessAverageDelay Unsigned32, hwDocsQamDVBInputTSSeamlessMaxDelay Unsigned32, hwDocsQamDVBInputTSSeamlessMinDelay Unsigned32, hwDocsQamInputTSStatisticsLastCleared DateAndTime, hwDocsQamInputTSSeamlessPrimaryPacketSpacing Unsigned32, hwDocsQamInputTSSeamlessSecondaryPacketSpacing Unsigned32, hwDocsQamInputTSSeamlessPrimaryPacketSpacingMax Unsigned32, hwDocsQamInputTSSeamlessSecondaryPacketSpacingMax Unsigned32 } -- 1.3.6.1.4.1.2011.6.187.23.1.1 hwDocsQamDVBInputTSStatisticsIndex OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the index of statistics table for input TS. " ::= { hwDocsQamDVBInputTSStatisticsEntry 1 } -- 1.3.6.1.4.1.2011.6.187.23.1.2 hwDocsQamDVBInputTSStatisticsOperMode OBJECT-TYPE SYNTAX INTEGER { clearStatistic(1), invalid(-1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the operation mode. The set operation can clear statistics for input TS. Options: 1. clearStatistic(1) -indicates clearing statistics for input TS 2. invalid(-1) -indicates invalid " ::= { hwDocsQamDVBInputTSStatisticsEntry 2 } -- 1.3.6.1.4.1.2011.6.187.23.1.3 hwDocsQamDVBInputTSPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates packet statistics for input TS. " ::= { hwDocsQamDVBInputTSStatisticsEntry 3 } -- 1.3.6.1.4.1.2011.6.187.23.1.4 hwDocsQamDVBInputTSCountOfJitterOverflow OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the jitter overflow statistics. " ::= { hwDocsQamDVBInputTSStatisticsEntry 4 } -- 1.3.6.1.4.1.2011.6.187.23.1.5 hwDocsQamDVBInputTSCountOfJitterUnderflow OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the jitter underflow statistics. " ::= { hwDocsQamDVBInputTSStatisticsEntry 5 } -- 1.3.6.1.4.1.2011.6.187.23.1.6 hwDocsQamDVBInputTSDiscontinuityCounter OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the discontinuity counter of input TS. " ::= { hwDocsQamDVBInputTSStatisticsEntry 6 } -- 1.3.6.1.4.1.2011.6.187.23.1.7 hwDocsQamDVBInputTSRTPSequenceErrorCounter OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the RTP sequence error counter of input TS. " ::= { hwDocsQamDVBInputTSStatisticsEntry 7 } -- 1.3.6.1.4.1.2011.6.187.23.1.8 hwDocsQamDVBInputTSPATErrors OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of program association table (PAT) errors of the input transport stream (TS). " ::= { hwDocsQamDVBInputTSStatisticsEntry 8 } -- 1.3.6.1.4.1.2011.6.187.23.1.9 hwDocsQamDVBInputTSPATMissings OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of lost PATs of the input TS. " ::= { hwDocsQamDVBInputTSStatisticsEntry 9 } -- 1.3.6.1.4.1.2011.6.187.23.1.10 hwDocsQamDVBInputTSPMTErrors OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of program map table (PMT) errors of the input TS. " ::= { hwDocsQamDVBInputTSStatisticsEntry 10 } -- 1.3.6.1.4.1.2011.6.187.23.1.11 hwDocsQamDVBInputTSPMTMissings OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of lost PMTs of the input TS. " ::= { hwDocsQamDVBInputTSStatisticsEntry 11 } -- 1.3.6.1.4.1.2011.6.187.23.1.12 hwDocsQamDVBInputTSOriginalPrimaryRTPSequenceErrorCounter OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the primary original RTP error count of the input TS. " ::= { hwDocsQamDVBInputTSStatisticsEntry 12 } -- 1.3.6.1.4.1.2011.6.187.23.1.13 hwDocsQamDVBInputTSOriginalSecondaryRTPSequenceErrorCounter OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the secondary original RTP error count of the input TS. " ::= { hwDocsQamDVBInputTSStatisticsEntry 13 } -- 1.3.6.1.4.1.2011.6.187.23.1.14 hwDocsQamDVBInputTSSeamlessAverageDelay OBJECT-TYPE SYNTAX Unsigned32(0..4294967295) UNITS "millisecond" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the average delay of the input TS in seamless mode. The default value is 4294967295, indicates that no delay is detected. " ::= { hwDocsQamDVBInputTSStatisticsEntry 14 } -- 1.3.6.1.4.1.2011.6.187.23.1.15 hwDocsQamDVBInputTSSeamlessMaxDelay OBJECT-TYPE SYNTAX Unsigned32(0..4294967295) UNITS "millisecond" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the maximum delay of the input TS in seamless mode. The default value is 4294967295, indicates that no delay is detected. " ::= { hwDocsQamDVBInputTSStatisticsEntry 15 } -- 1.3.6.1.4.1.2011.6.187.23.1.16 hwDocsQamDVBInputTSSeamlessMinDelay OBJECT-TYPE SYNTAX Unsigned32(0..4294967295) UNITS "millisecond" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the minimum delay of the input TS in seamless mode. The default value is 4294967295, indicates that no delay is detected. " ::= { hwDocsQamDVBInputTSStatisticsEntry 16 } -- 1.3.6.1.4.1.2011.6.187.23.1.17 hwDocsQamInputTSStatisticsLastCleared OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the time on which input TS statistics are cleared the last time. The default value is 1970-01-01 00:00:00, indicates input TS statistics has never been cleared. " ::= { hwDocsQamDVBInputTSStatisticsEntry 17 } -- 1.3.6.1.4.1.2011.6.187.23.1.18 hwDocsQamInputTSSeamlessPrimaryPacketSpacing OBJECT-TYPE SYNTAX Unsigned32(0..4294967295) UNITS "millisecond" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the interval for packet transmission for the primary TS of the input TS in seamless mode. The default value is 4294967295, indicates that no interval is detected. " ::= { hwDocsQamDVBInputTSStatisticsEntry 18 } -- 1.3.6.1.4.1.2011.6.187.23.1.19 hwDocsQamInputTSSeamlessSecondaryPacketSpacing OBJECT-TYPE SYNTAX Unsigned32(0..4294967295) UNITS "millisecond" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the interval for packet transmission for the secondary TS of the input TS in seamless mode. The default value is 4294967295, indicates that no interval is detected. " ::= { hwDocsQamDVBInputTSStatisticsEntry 19 } -- 1.3.6.1.4.1.2011.6.187.23.1.20 hwDocsQamInputTSSeamlessPrimaryPacketSpacingMax OBJECT-TYPE SYNTAX Unsigned32(0..4294967295) UNITS "millisecond" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the maximum interval for packet transmission for the primary TS of the input TS in seamless mode. The default value is 4294967295, indicates that no interval is detected. " ::= { hwDocsQamDVBInputTSStatisticsEntry 20 } -- 1.3.6.1.4.1.2011.6.187.23.1.21 hwDocsQamInputTSSeamlessSecondaryPacketSpacingMax OBJECT-TYPE SYNTAX Unsigned32(0..4294967295) UNITS "millisecond" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the maximum interval for packet transmission for the secondary TS of the input TS in seamless mode. The default value is 4294967295, indicates that no interval is detected. " ::= { hwDocsQamDVBInputTSStatisticsEntry 21 } -- 1.3.6.1.4.1.2011.6.187.30 hwDocsQamDVBDomainChannelTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDocsQamDVBDomainChannelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the DVB domain channel table used to configure the networkid, streamid and output policy of channels in a DVB domain. The indexes of this table are hwDocsQamDVBDomainName and hwDocsQamDVBDomainChannelID. " ::= { hwEqamAn 30 } -- 1.3.6.1.4.1.2011.6.187.30.1 hwDocsQamDVBDomainChannelEntry OBJECT-TYPE SYNTAX HwDocsQamDVBDomainChannelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the DVB domain channel table used to configure the networkid, streamid and output policy of channels in a DVB domain. The indexes of this entry are hwDocsQamDVBDomainName and hwDocsQamDVBDomainChannelID. " INDEX { hwDocsQamDVBDomainName, hwDocsQamDVBDomainChannelID } ::= { hwDocsQamDVBDomainChannelTable 1 } HwDocsQamDVBDomainChannelEntry ::= SEQUENCE { hwDocsQamDVBDomainChannelID Unsigned32, hwDocsQamDVBDomainChannelNetworkID Unsigned32, hwDocsQamDVBDomainChannelTransportStreamID Unsigned32, hwDocsQamDVBDomainChannelPSISIModeSDTA HwEqamPsiPolicyChannnel, hwDocsQamDVBDomainChannelPSISIModeSDTO HwEqamPsiPolicyChannnel, hwDocsQamDVBDomainChannelPSISIModeEITpfA HwEqamPsiPolicyChannnel, hwDocsQamDVBDomainChannelPSISIModeEITpfO HwEqamPsiPolicyChannnel, hwDocsQamDVBDomainChannelPSISIModeEITsFirstA HwEqamPsiPolicyChannnel, hwDocsQamDVBDomainChannelPSISIModeEITsFirstO HwEqamPsiPolicyChannnel, hwDocsQamDVBDomainChannelPSISIModeEITsSecondA HwEqamPsiPolicyChannnel, hwDocsQamDVBDomainChannelPSISIModeEITsSecondO HwEqamPsiPolicyChannnel, hwDocsQamDVBDomainChannelOriginalNetworkID Unsigned32, hwDocsQamDVBDomainChannelOutputRate Unsigned32, hwDocsQamDVBDomainChannelOutputEnable TruthValue } -- 1.3.6.1.4.1.2011.6.187.30.1.1 hwDocsQamDVBDomainChannelID OBJECT-TYPE SYNTAX Unsigned32(1..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the channel ID. " ::= { hwDocsQamDVBDomainChannelEntry 1 } -- 1.3.6.1.4.1.2011.6.187.30.1.2 hwDocsQamDVBDomainChannelNetworkID OBJECT-TYPE SYNTAX Unsigned32(0..65535|4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the network id of the channel. The default value is 4294967295, indicating the network id of the channel is invalid. " ::= { hwDocsQamDVBDomainChannelEntry 2 } -- 1.3.6.1.4.1.2011.6.187.30.1.3 hwDocsQamDVBDomainChannelTransportStreamID OBJECT-TYPE SYNTAX Unsigned32(0..65535|4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the transport stream id of the channel. The default value is 4294967295, indicating the stream id of the channel is invalid. " ::= { hwDocsQamDVBDomainChannelEntry 3 } -- 1.3.6.1.4.1.2011.6.187.30.1.4 hwDocsQamDVBDomainChannelPSISIModeSDTA OBJECT-TYPE SYNTAX HwEqamPsiPolicyChannnel MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the output policy of SDT(Service Information Table) actual. The default value is default(3). " ::= { hwDocsQamDVBDomainChannelEntry 4 } -- 1.3.6.1.4.1.2011.6.187.30.1.5 hwDocsQamDVBDomainChannelPSISIModeSDTO OBJECT-TYPE SYNTAX HwEqamPsiPolicyChannnel MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the output policy of SDT(Service Information Table) other. The default value is default(3). " ::= { hwDocsQamDVBDomainChannelEntry 5 } -- 1.3.6.1.4.1.2011.6.187.30.1.6 hwDocsQamDVBDomainChannelPSISIModeEITpfA OBJECT-TYPE SYNTAX HwEqamPsiPolicyChannnel MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the output policy of actual TS, present/following EIT(Event Information Table). The default value is default(3). " ::= { hwDocsQamDVBDomainChannelEntry 6 } -- 1.3.6.1.4.1.2011.6.187.30.1.7 hwDocsQamDVBDomainChannelPSISIModeEITpfO OBJECT-TYPE SYNTAX HwEqamPsiPolicyChannnel MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the output policy of other TS, present/following EIT(Event Information Table). The default value is default(3). " ::= { hwDocsQamDVBDomainChannelEntry 7 } -- 1.3.6.1.4.1.2011.6.187.30.1.8 hwDocsQamDVBDomainChannelPSISIModeEITsFirstA OBJECT-TYPE SYNTAX HwEqamPsiPolicyChannnel MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the output policy of actual TS, first(day 0-3) schedual EIT(Event Information Table). The default value is default(3). " ::= { hwDocsQamDVBDomainChannelEntry 8 } -- 1.3.6.1.4.1.2011.6.187.30.1.9 hwDocsQamDVBDomainChannelPSISIModeEITsFirstO OBJECT-TYPE SYNTAX HwEqamPsiPolicyChannnel MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the output policy of other TS, first(day 0-3) schedual EIT(Event Information Table). The default value is default(3). " ::= { hwDocsQamDVBDomainChannelEntry 9 } -- 1.3.6.1.4.1.2011.6.187.30.1.10 hwDocsQamDVBDomainChannelPSISIModeEITsSecondA OBJECT-TYPE SYNTAX HwEqamPsiPolicyChannnel MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the output policy of actual TS, second(day 4-7) schedual EIT(Event Information Table). The default value is default(3). " ::= { hwDocsQamDVBDomainChannelEntry 10 } -- 1.3.6.1.4.1.2011.6.187.30.1.11 hwDocsQamDVBDomainChannelPSISIModeEITsSecondO OBJECT-TYPE SYNTAX HwEqamPsiPolicyChannnel MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the output policy of other TS, second(day 4-7) schedual EIT(Event Information Table). The default value is default(3). " ::= { hwDocsQamDVBDomainChannelEntry 11 } -- 1.3.6.1.4.1.2011.6.187.30.1.12 hwDocsQamDVBDomainChannelOriginalNetworkID OBJECT-TYPE SYNTAX Unsigned32(0..65535|4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the original network ID of a DVB channel. The default value is 4294967295, which indicates that no original network ID is configured. When no original network ID is configured, the value of hwDocsQamDVBDomainChannelNetworkID takes effect. " ::= { hwDocsQamDVBDomainChannelEntry 12 } -- 1.3.6.1.4.1.2011.6.187.30.1.13 hwDocsQamDVBDomainChannelOutputRate OBJECT-TYPE SYNTAX Unsigned32(0..10000000|4294967295) UNITS "kbps" MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the output rate of the channel in the DVB domain. The default value is 4294967295, which indicates that no output rate of the channel is configured. And the value of hwDocsQamDVBDomainDefChannelOutputRate takes effect. " ::= { hwDocsQamDVBDomainChannelEntry 13 } -- 1.3.6.1.4.1.2011.6.187.30.1.14 hwDocsQamDVBDomainChannelOutputEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the status of the channel in the DVB domain. The default value is true. " ::= { hwDocsQamDVBDomainChannelEntry 14 } -- 1.3.6.1.4.1.2011.6.187.31 hwDocsQamFMDomainTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDocsQamFMDomainEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the FM domain table used to create or destroy a FM domain. The index of this table is hwDocsQamFMDomainName. " ::= { hwEqamAn 31 } -- 1.3.6.1.4.1.2011.6.187.31.1 hwDocsQamFMDomainEntry OBJECT-TYPE SYNTAX HwDocsQamFMDomainEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the FM domain table used to create or destroy a FM domain. The index of this entry is hwDocsQamFMDomainName. " INDEX { hwDocsQamFMDomainName } ::= { hwDocsQamFMDomainTable 1 } HwDocsQamFMDomainEntry ::= SEQUENCE { hwDocsQamFMDomainName OCTET STRING, hwDocsQamFMDomainMapNumber Unsigned32, hwDocsQamFMDomainPortNumber Unsigned32, hwDocsQamFMDomainRowStatus RowStatus } -- 1.3.6.1.4.1.2011.6.187.31.1.1 hwDocsQamFMDomainName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..15)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the FM domain name. " ::= { hwDocsQamFMDomainEntry 1 } -- 1.3.6.1.4.1.2011.6.187.31.1.2 hwDocsQamFMDomainMapNumber OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of FM mapping in the FM domain. " ::= { hwDocsQamFMDomainEntry 2 } -- 1.3.6.1.4.1.2011.6.187.31.1.3 hwDocsQamFMDomainPortNumber OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of ports added in the FM domain. " ::= { hwDocsQamFMDomainEntry 3 } -- 1.3.6.1.4.1.2011.6.187.31.1.4 hwDocsQamFMDomainRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row status, used to query, create, and delete a FM domain table. It supports the active(1), createAndGo(4) and destroy(6) operations. During query, the value of this leaf is always active(1). During deletion, specify the value of this leaf to destroy(6). During creation, specify the value of this leaf to createAndGo(4). Options: 1. active(1) -indicates the query operation 2. createAndGo(4) -indicates the creating operation 3. destroy(6) -indicates the deleting operation " ::= { hwDocsQamFMDomainEntry 4 } -- 1.3.6.1.4.1.2011.6.187.32 hwDocsQamFmMapTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDocsQamFmMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the FM mapping table used to configure the mapping between video streams and cable channels. The indexes of this table are hwDocsQamFMDomainName and hwDocsQamFmMapIndex. " ::= { hwEqamAn 32 } -- 1.3.6.1.4.1.2011.6.187.32.1 hwDocsQamFmMapEntry OBJECT-TYPE SYNTAX HwDocsQamFmMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the FM mapping table used to configure the mapping between video streams and cable channels. The indexes of this entry are hwDocsQamFMDomainName and hwDocsQamFmMapIndex. " INDEX { hwDocsQamFMDomainName, hwDocsQamFmMapIndex } ::= { hwDocsQamFmMapTable 1 } HwDocsQamFmMapEntry ::= SEQUENCE { hwDocsQamFmMapIndex Unsigned32, hwDocsQamFmInputTs Unsigned32, hwDocsQamFmInputProgramID Unsigned32, hwDocsQamFmChannelID Unsigned32, hwDocsQamFmMapRowStatus RowStatus } -- 1.3.6.1.4.1.2011.6.187.32.1.1 hwDocsQamFmMapIndex OBJECT-TYPE SYNTAX Unsigned32 (1..65535|4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the index of a FM mapping table. You can also fill 4294967295 and the system will automatically allocate an index. " ::= { hwDocsQamFmMapEntry 1 } -- 1.3.6.1.4.1.2011.6.187.32.1.2 hwDocsQamFmInputTs OBJECT-TYPE SYNTAX Unsigned32(1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the index of a input TS. " ::= { hwDocsQamFmMapEntry 2 } -- 1.3.6.1.4.1.2011.6.187.32.1.3 hwDocsQamFmInputProgramID OBJECT-TYPE SYNTAX Unsigned32(1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the program ID in the input TS. " ::= { hwDocsQamFmMapEntry 3 } -- 1.3.6.1.4.1.2011.6.187.32.1.4 hwDocsQamFmChannelID OBJECT-TYPE SYNTAX Unsigned32(1..255) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the channel ID. " ::= { hwDocsQamFmMapEntry 4 } -- 1.3.6.1.4.1.2011.6.187.32.1.5 hwDocsQamFmMapRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row status, used to query, create, and delete a FM mapping. It supports the active(1), createAndGo(4) and destroy(6) operations. During query, the value of this leaf is always active(1). During deletion, specify the value of this leaf to destroy(6). During creation, specify the value of this leaf to createAndGo(4). Options: 1. active(1) -indicates the query operation 2. createAndGo(4) -indicates the creating operation 3. destroy(6) -indicates the deleting operation " ::= { hwDocsQamFmMapEntry 5 } -- 1.3.6.1.4.1.2011.6.187.33 hwDocsQamFMPortConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDocsQamFMPortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the FM domain port table used to manage relationships between FM domains and ports. The index of this table is ifIndex. " ::= { hwEqamAn 33 } -- 1.3.6.1.4.1.2011.6.187.33.1 hwDocsQamFMPortConfigEntry OBJECT-TYPE SYNTAX HwDocsQamFMPortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the FM domain port table used to manage relationships between FM domains and ports. The index of this entry is ifIndex. " INDEX { ifIndex } ::= { hwDocsQamFMPortConfigTable 1 } HwDocsQamFMPortConfigEntry ::= SEQUENCE { hwDocsQamFMPortConfigDomainName OCTET STRING, hwDocsQamFMPortConfigRowStatus RowStatus } -- 1.3.6.1.4.1.2011.6.187.33.1.1 hwDocsQamFMPortConfigDomainName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..15)) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the FM domain name. " ::= { hwDocsQamFMPortConfigEntry 1 } -- 1.3.6.1.4.1.2011.6.187.33.1.2 hwDocsQamFMPortConfigRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row status, used to query, create, modify, and delete a port table. It supports the active(1), createAndGo(4), and destroy(6) operations. During query, the value of this leaf is always active(1). During deletion, specify the value of this leaf to destroy(6). During creation, specify the value of this leaf to createAndGo(4). Options: 1. active(1) -indicates the query operation 2. createAndGo(4) -indicates the creating operation 3. destroy(6) -indicates the deleting operation " ::= { hwDocsQamFMPortConfigEntry 2} -- 1.3.6.1.4.1.2011.6.187.34 hwDocsQamFmRDSTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDocsQamFmRDSEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the FM RDS table used to configure the RDS information of a FM mapping in FM domain. The indexes of this table are hwDocsQamFMDomainName and hwDocsQamFmMapIndex. " ::= { hwEqamAn 34 } -- 1.3.6.1.4.1.2011.6.187.34.1 hwDocsQamFmRDSEntry OBJECT-TYPE SYNTAX HwDocsQamFmRDSEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the FM RDS table used to configure the RDS information of a FM mapping in FM domain. The indexes of this entry are hwDocsQamFMDomainName and hwDocsQamFmMapIndex. " INDEX { hwDocsQamFMDomainName, hwDocsQamFmMapIndex } ::= { hwDocsQamFmRDSTable 1 } HwDocsQamFmRDSEntry ::= SEQUENCE { hwDocsQamFmRDSAdminStatus INTEGER, hwDocsQamFmRDSProgramType Integer32, hwDocsQamFmRDSProgramServiceName OCTET STRING, hwDocsQamFmRDSRadioText OCTET STRING, hwDocsQamFmRDSCoverageArea Integer32, hwDocsQamFmRDSProgramReference Integer32, hwDocsQamFmRDSMode INTEGER, hwDocsQamFmRDSCTDef INTEGER, hwDocsQamFmRDSCountryCodeValue Integer32, hwDocsQamFmRDSTATP BITS, hwDocsQamFmRDSDI BITS, hwDocsQamFmRDSMS BITS, hwDocsQamFmRDSCT INTEGER, hwDocsQamFmRDSRealTimeClock DateAndTime } -- 1.3.6.1.4.1.2011.6.187.34.1.1 hwDocsQamFmRDSAdminStatus OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the status of RDS admin, the default value is disable(1). Options: 1. disable(1) -indicates the status of RDS admin is disable. 2. enable(2) -indicates the status of RDS admin is enable. " ::= { hwDocsQamFmRDSEntry 1 } -- 1.3.6.1.4.1.2011.6.187.34.1.2 hwDocsQamFmRDSProgramType OBJECT-TYPE SYNTAX Integer32(0..31) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the type of program. Refers to the section 3.2.1.2 of EN50067_RDS_Standard.pdf 0 - None. 1 - News. 2 - Affairs. 3 - Info. 4 - Sport. 5 - Educate. 6 - Drama. 7 - Culture. 8 - Science. 9 - Varied. 10 - Pop M. 11 - Rock M. 12 - Easy M. 13 - Light M. 14 - Classics. 15 - Other M. 16 - Weather. 17 - Finance. 18 - Children. 19 - Social. 20 - Religion. 21 - Phone In. 22 - Travel. 23 - Leisure. 24 - Jazz. 25 - Country. 26 - Nation M. 27 - Oldies. 28 - Folk M. 29 - Document. 30 - TEST. 31 - Alarm !. the default value is 0. " ::= { hwDocsQamFmRDSEntry 2 } -- 1.3.6.1.4.1.2011.6.187.34.1.3 hwDocsQamFmRDSProgramServiceName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..8)) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the service name of the FM program. " ::= { hwDocsQamFmRDSEntry 3 } -- 1.3.6.1.4.1.2011.6.187.34.1.4 hwDocsQamFmRDSRadioText OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the radio text of the FM program. " ::= { hwDocsQamFmRDSEntry 4 } -- 1.3.6.1.4.1.2011.6.187.34.1.5 hwDocsQamFmRDSCoverageArea OBJECT-TYPE SYNTAX Integer32(0..15) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the coverage area of the FM program. Refers to the section 3.2.1.1 of EN50067_RDS_Standard.pdf. 0 - L. 1 - I. 2 - N. 3 - S. 4 - R1. 5 - R2 6 - R3. 7 - R4. 8 - R5. 9 - R6. 10 - R7. 11 - R8. 12 - R9. 13 - R10. 14 - R11. 15 - R12. the default value is 0. " ::= { hwDocsQamFmRDSEntry 5 } -- 1.3.6.1.4.1.2011.6.187.34.1.6 hwDocsQamFmRDSProgramReference OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the program reference value. The default value is 0. " ::= { hwDocsQamFmRDSEntry 6 } -- 1.3.6.1.4.1.2011.6.187.34.1.7 hwDocsQamFmRDSMode OBJECT-TYPE SYNTAX INTEGER { manual(1), embedded(2), external(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the mode of RDS. The default value is manual(1). Options: 1. manual(1) -indicates RDS is configured manually. 2. embedded(2)-indicates RDS information is embedded in the bit stream of FM. 3. external(3)-indicates RDS information is in the bit stream of PID. " ::= { hwDocsQamFmRDSEntry 7 } -- 1.3.6.1.4.1.2011.6.187.34.1.8 hwDocsQamFmRDSCTDef OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2), invalid(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates default Clock-time and date switch of RDS. The default value is invalid(3). Options: 1. enable(1) -indicates the switch is on. 2. disable(2) -indicates the switch is off. 3. invalid(3) -indicates the switch is invalid. " ::= { hwDocsQamFmRDSEntry 8 } -- 1.3.6.1.4.1.2011.6.187.34.1.9 hwDocsQamFmRDSCountryCodeValue OBJECT-TYPE SYNTAX Integer32(0..15) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the country of the FM program. The default value is 0. " ::= { hwDocsQamFmRDSEntry 9 } -- 1.3.6.1.4.1.2011.6.187.34.1.10 hwDocsQamFmRDSTATP OBJECT-TYPE SYNTAX BITS { ta(0), tp(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates Traffic-announcement identification and Traffic-programme identification of RDS. The format is 2 bits. The default value is 0. Refers to the section 3.2.1.3 of EN50067_RDS_Standard.pdf. Bit 0 -indicates Traffic-announcement identification. Bit 1 -indicates Traffic-programme identification. " ::= { hwDocsQamFmRDSEntry 10 } -- 1.3.6.1.4.1.2011.6.187.34.1.11 hwDocsQamFmRDSDI OBJECT-TYPE SYNTAX BITS { monostereo(0), artificialhead(1), compressed(2), dynamicPtyIndicator(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the Decoder Identification and Dynamic PTY Indicator.The format is 4 bits. The default value is 0. Refers to the section 3.2.1.4 of EN50067_RDS_Standard.pdf. Bit 0 -Mono/Stereo. Bit 1 -Not Artificial Head/Artificial Head. Bit 2 -Not Compressed/Compressed. Bit 3 -Static PTY/Dynamically switched. " ::= { hwDocsQamFmRDSEntry 11 } -- 1.3.6.1.4.1.2011.6.187.34.1.12 hwDocsQamFmRDSMS OBJECT-TYPE SYNTAX BITS { ms(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the state of Music Speech switch. The format is 1 bit. The default value is 0, indicating the Music Speech switch is off. Refers to the section 3.2.1.4 of EN50067_RDS_Standard.pdf. " ::= { hwDocsQamFmRDSEntry 12 } -- 1.3.6.1.4.1.2011.6.187.34.1.13 hwDocsQamFmRDSCT OBJECT-TYPE SYNTAX INTEGER { on(1), off(2), invalid(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates Clock-time and date switch. The default value is invalid(3). Options: 1. on(1) -indicates the switch is on. 2. off(2) -indicates the switch is off. 3. invalid(3) -indicates the switch is invalid. " ::= { hwDocsQamFmRDSEntry 13 } -- 1.3.6.1.4.1.2011.6.187.34.1.14 hwDocsQamFmRDSRealTimeClock OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Indicate date and time(with time zone) of RDS. The default value is 1900-01-01 00:00:00. " ::= { hwDocsQamFmRDSEntry 14 } -- 1.3.6.1.4.1.2011.6.187.35 hwDocsQamDVBPIDMappingTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDocsQamDVBPIDMappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the DVB PID mapping table used to configure the input TS list, input PID list, output PID list of channels in a DVB domain. The indexes of this table are hwDocsQamDVBDomainName and hwDocsQamDVBPIDMappingChannelID. " ::= { hwEqamAn 35 } -- 1.3.6.1.4.1.2011.6.187.35.1 hwDocsQamDVBPIDMappingEntry OBJECT-TYPE SYNTAX HwDocsQamDVBPIDMappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the DVB PID mapping table used to configure the input TS list, input PID list, output PID list of channels in a DVB domain. The indexes of this entry are hwDocsQamDVBDomainName and hwDocsQamDVBPIDMappingChannelID. " INDEX { hwDocsQamDVBDomainName, hwDocsQamDVBPIDMappingChannelID } ::= { hwDocsQamDVBPIDMappingTable 1 } HwDocsQamDVBPIDMappingEntry ::= SEQUENCE { hwDocsQamDVBPIDMappingChannelID Unsigned32, hwDocsQamDVBPIDMappingInputTSList OCTET STRING, hwDocsQamDVBPIDMappingInputPIDList OCTET STRING, hwDocsQamDVBPIDMappingOutputPIDList OCTET STRING } -- 1.3.6.1.4.1.2011.6.187.35.1.1 hwDocsQamDVBPIDMappingChannelID OBJECT-TYPE SYNTAX Unsigned32(1..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the ChannelID. " ::= { hwDocsQamDVBPIDMappingEntry 1 } -- 1.3.6.1.4.1.2011.6.187.35.1.2 hwDocsQamDVBPIDMappingInputTSList OBJECT-TYPE SYNTAX OCTET STRING(SIZE (0..16)) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the input TS list. Input TS ID consists of two bytes and must be in one-to-one mapping with input PID list and output PID list. " ::= { hwDocsQamDVBPIDMappingEntry 2 } -- 1.3.6.1.4.1.2011.6.187.35.1.3 hwDocsQamDVBPIDMappingInputPIDList OBJECT-TYPE SYNTAX OCTET STRING(SIZE (0..16)) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the input PID list. Input PID consists of two bytes and must be in one-to-one mapping with input TS list and output PID list. " ::= { hwDocsQamDVBPIDMappingEntry 3 } -- 1.3.6.1.4.1.2011.6.187.35.1.4 hwDocsQamDVBPIDMappingOutputPIDList OBJECT-TYPE SYNTAX OCTET STRING(SIZE (0..16)) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the output PID list. Output PID consists of two bytes and must be in one-to-one mapping with input TS list and input PID list. " ::= { hwDocsQamDVBPIDMappingEntry 4 } -- 1.3.6.1.4.1.2011.6.187.37 hwDocsQamDVBProcessGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDocsQamDVBProcessGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the table for configuring the working board and protection board in the DVB service processing protection group, and perform switchover. The index of this table is hwDocsQamDVBProcessGroupID. " ::= { hwEqamAn 37 } -- 1.3.6.1.4.1.2011.6.187.37.1 hwDocsQamDVBProcessGroupEntry OBJECT-TYPE SYNTAX HwDocsQamDVBProcessGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the table for configuring the working board and protection board in the DVB service processing protection group, and perform switchover. The index of this entry is hwDocsQamDVBProcessGroupID. " INDEX { hwDocsQamDVBProcessGroupID } ::= { hwDocsQamDVBProcessGroupTable 1 } HwDocsQamDVBProcessGroupEntry ::= SEQUENCE { hwDocsQamDVBProcessGroupID Unsigned32, hwDocsQamDVBProcessGroupWorkFrameID Unsigned32, hwDocsQamDVBProcessGroupWorkSlotID Unsigned32, hwDocsQamDVBProcessGroupProtectFrameID Unsigned32, hwDocsQamDVBProcessGroupProtectSlotID Unsigned32, hwDocsQamDVBProcessGroupSwitchover INTEGER, hwDocsQamDVBProcessGroupActiveFrameID Unsigned32, hwDocsQamDVBProcessGroupActiveSlotID Unsigned32, hwDocsQamDVBProcessGroupActive INTEGER, hwDocsQamDVBProcessGroupRowStatus RowStatus } -- 1.3.6.1.4.1.2011.6.187.37.1.1 hwDocsQamDVBProcessGroupID OBJECT-TYPE SYNTAX Unsigned32(1..8|4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the ID of a DVB service processing protection group. " ::= { hwDocsQamDVBProcessGroupEntry 1 } -- 1.3.6.1.4.1.2011.6.187.37.1.2 hwDocsQamDVBProcessGroupWorkFrameID OBJECT-TYPE SYNTAX Unsigned32(0..255|4294967295) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the ID of the frame that accomdates the working board in a DVB service processing protection group. " ::= { hwDocsQamDVBProcessGroupEntry 2 } -- 1.3.6.1.4.1.2011.6.187.37.1.3 hwDocsQamDVBProcessGroupWorkSlotID OBJECT-TYPE SYNTAX Unsigned32(0..255|4294967295) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the ID of the slot that accommodates the working board in a DVB service processing protection group. " ::= { hwDocsQamDVBProcessGroupEntry 3 } -- 1.3.6.1.4.1.2011.6.187.37.1.4 hwDocsQamDVBProcessGroupProtectFrameID OBJECT-TYPE SYNTAX Unsigned32(0..255|4294967295) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the ID of the frame that accommodates the protection board in a DVB service processing protection group. " ::= { hwDocsQamDVBProcessGroupEntry 4 } -- 1.3.6.1.4.1.2011.6.187.37.1.5 hwDocsQamDVBProcessGroupProtectSlotID OBJECT-TYPE SYNTAX Unsigned32(0..255|4294967295) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the ID of the slot that accommodates the protection board in a DVB service processing protection group. " ::= { hwDocsQamDVBProcessGroupEntry 5 } -- 1.3.6.1.4.1.2011.6.187.37.1.6 hwDocsQamDVBProcessGroupSwitchover OBJECT-TYPE SYNTAX INTEGER { switchover(1), none(255) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates switchover in a DVB service processing protection group. The default value is none(255). Options: 1. switchover(1) -Perform a switchover operation. 2. none(255) -Do not perform any operation. " ::= { hwDocsQamDVBProcessGroupEntry 6 } -- 1.3.6.1.4.1.2011.6.187.37.1.7 hwDocsQamDVBProcessGroupActiveFrameID OBJECT-TYPE SYNTAX Unsigned32(0..255|4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the ID of the frame that accommodates the active board in a DVB service processing protection group. " ::= { hwDocsQamDVBProcessGroupEntry 7 } -- 1.3.6.1.4.1.2011.6.187.37.1.8 hwDocsQamDVBProcessGroupActiveSlotID OBJECT-TYPE SYNTAX Unsigned32(0..255|4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the ID of the slot that accommodates the active board in a DVB service processing protection group. " ::= { hwDocsQamDVBProcessGroupEntry 8 } -- 1.3.6.1.4.1.2011.6.187.37.1.9 hwDocsQamDVBProcessGroupActive OBJECT-TYPE SYNTAX INTEGER { work(1), protect(2), none(255) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the role of the active board in a DVB service processing protection group. Options: 1. work(1) -Indicates that the working board in a DVB service processing protection group is the active board. 2. protect(2) -Indicates that the protection board in a DVB service processing protection group is the active board. 3. none(255) -Indicates that the current DVB service processing protection group does not have an active board. " ::= { hwDocsQamDVBProcessGroupEntry 9 } -- 1.3.6.1.4.1.2011.6.187.37.1.10 hwDocsQamDVBProcessGroupRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates a row status for querying, creating, modifying, and deleting a DVB service processing protection group table. It supports active(1), createAndGo(4), and destroy(6) operations. During query operations, the value of this leaf is always active(1). During delete operations, the value of this leaf must be set to destroy(6). During create operations, the value of this leaf must be set to createAndGo(4). This leaf is not mandatory when the table of a DVB service processing protection group needs to be modified. Options: 1. active(1) -indicates the query operation 2. createAndGo(4) -indicates the creating operation 3. destroy(6) -indicates the deleting operation " ::= { hwDocsQamDVBProcessGroupEntry 10 } -- 1.3.6.1.4.1.2011.6.187.38 hwDocsQamInputPIDInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDocsQamInputPIDInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the input PID info table used to display the packet identifier (PID), PID type, PID subtype, PID rate, maximum PID rate, minimum PID rate, PID scrambling information, program clock reference (PCR) association of the PID, continuity counter (CC) error count of the PID, ID and name of the program associated with the PID of the input TS. The indexes of this table are hwDocsQamInputTSIndex and hwDocsQamInputPIDIndex. " ::= { hwEqamAn 38 } -- 1.3.6.1.4.1.2011.6.187.38.1 hwDocsQamInputPIDInfoEntry OBJECT-TYPE SYNTAX HwDocsQamInputPIDInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the input PID info table used to display the packet identifier (PID), PID type, PID subtype, PID rate, maximum PID rate, minimum PID rate, PID scrambling information, program clock reference (PCR) association of the PID, continuity counter (CC) error count of the PID, ID and name of the program associated with the PID of the input TS. The indexes of this entry are hwDocsQamInputTSIndex and hwDocsQamInputPIDIndex. " INDEX { hwDocsQamInputTSIndex, hwDocsQamInputPIDIndex } ::= { hwDocsQamInputPIDInfoTable 1 } HwDocsQamInputPIDInfoEntry ::= SEQUENCE { hwDocsQamInputPIDIndex Unsigned32, hwDocsQamInputPID Unsigned32, hwDocsQamInputPIDType HwEqamInputPIDType, hwDocsQamInputPIDStreamType Integer32, hwDocsQamInputPIDRate Unsigned32, hwDocsQamInputPIDMaxRate Unsigned32, hwDocsQamInputPIDMinRate Unsigned32, hwDocsQamInputPIDScambled INTEGER, hwDocsQamInputPIDCCErrorCount Counter64, hwDocsQamInputPIDPCRReference TruthValue, hwDocsQamInputPIDProgramIDReference Unsigned32, hwDocsQamInputPIDProgramNameReference OCTET STRING } -- 1.3.6.1.4.1.2011.6.187.38.1.1 hwDocsQamInputPIDIndex OBJECT-TYPE SYNTAX Unsigned32(1..8192) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the input PID index, whose value is obtained by adding 1 to the value of hwDocsQamInputPID. " ::= { hwDocsQamInputPIDInfoEntry 1 } -- 1.3.6.1.4.1.2011.6.187.38.1.2 hwDocsQamInputPID OBJECT-TYPE SYNTAX Unsigned32(0..8191) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the value of input PID. " ::= { hwDocsQamInputPIDInfoEntry 2 } -- 1.3.6.1.4.1.2011.6.187.38.1.3 hwDocsQamInputPIDType OBJECT-TYPE SYNTAX HwEqamInputPIDType MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the input PID type. The default value is unknown(255), indicating the unknown type. " ::= { hwDocsQamInputPIDInfoEntry 3 } -- 1.3.6.1.4.1.2011.6.187.38.1.4 hwDocsQamInputPIDStreamType OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "When the value of hwDocsQamInputPIDStreamType is 12, hwDocsQamInputPIDStreamType indicates the corresponding media type. For details about its value, see ISO/IEC 13818-1 [18] Program Map Table (PMT). Otherwise, the value of hwDocsQamInputPIDStreamType is 0. " ::= { hwDocsQamInputPIDInfoEntry 4 } -- 1.3.6.1.4.1.2011.6.187.38.1.5 hwDocsQamInputPIDRate OBJECT-TYPE SYNTAX Unsigned32(0..4294967295) UNITS "kbps" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the rate of the input PID. Unit: kbit/s. " ::= { hwDocsQamInputPIDInfoEntry 5 } -- 1.3.6.1.4.1.2011.6.187.38.1.6 hwDocsQamInputPIDMaxRate OBJECT-TYPE SYNTAX Unsigned32(0..4294967295) UNITS "kbps" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the maximum rate of the input PID. Unit: kbit/s. " ::= { hwDocsQamInputPIDInfoEntry 6 } -- 1.3.6.1.4.1.2011.6.187.38.1.7 hwDocsQamInputPIDMinRate OBJECT-TYPE SYNTAX Unsigned32(0..4294967295) UNITS "kbps" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the minimum rate of the input PID. Unit: kbit/s. " ::= { hwDocsQamInputPIDInfoEntry 7 } -- 1.3.6.1.4.1.2011.6.187.38.1.8 hwDocsQamInputPIDScambled OBJECT-TYPE SYNTAX INTEGER { notScambled(1), evenScambled(2), oddScambled(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the input PID scrambling information. Options: 1. notScambled(1) --Indicates no scrambling 2. evenScambled(2) --Indicates scrambling with even control word (CW) 3. oddScambled(3) --Indicates scrambling with odd CW " ::= { hwDocsQamInputPIDInfoEntry 8 } -- 1.3.6.1.4.1.2011.6.187.38.1.9 hwDocsQamInputPIDCCErrorCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the CC error count of the input PID. " ::= { hwDocsQamInputPIDInfoEntry 9 } -- 1.3.6.1.4.1.2011.6.187.38.1.10 hwDocsQamInputPIDPCRReference OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the PCR association of the input PID. The default value is false. " ::= { hwDocsQamInputPIDInfoEntry 10 } -- 1.3.6.1.4.1.2011.6.187.38.1.11 hwDocsQamInputPIDProgramIDReference OBJECT-TYPE SYNTAX Unsigned32(0..65535|4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the ID of the program associated with the PID. The default value is 4294967295, indicating no associated program. " ::= { hwDocsQamInputPIDInfoEntry 11 } -- 1.3.6.1.4.1.2011.6.187.38.1.12 hwDocsQamInputPIDProgramNameReference OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..63)) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the name of the program associated with the PID. The default value is an empty character string, indicating no associated program name.. " ::= { hwDocsQamInputPIDInfoEntry 12 } -- 1.3.6.1.4.1.2011.6.187.39 hwDocsQamInputTSPIDTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDocsQamInputTSPIDEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the input TS PID table used to display the number of PIDs, PID list, and PID list status mask of the input TS. The index of this table is hwDocsQamInputTSIndex. " ::= { hwEqamAn 39 } -- 1.3.6.1.4.1.2011.6.187.39.1 hwDocsQamInputTSPIDEntry OBJECT-TYPE SYNTAX HwDocsQamInputTSPIDEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the input TS PID table used to display the number of PIDs, PID list, and PID list status mask of the input TS. The index of this entry is hwDocsQamInputTSIndex. " INDEX { hwDocsQamInputTSIndex } ::= { hwDocsQamInputTSPIDTable 1 } HwDocsQamInputTSPIDEntry ::= SEQUENCE { hwDocsQamInputTSPIDNumber Unsigned32, hwDocsQamInputTSPIDList OCTET STRING, hwDocsQamInputTSPIDStateMask OCTET STRING } -- 1.3.6.1.4.1.2011.6.187.39.1.1 hwDocsQamInputTSPIDNumber OBJECT-TYPE SYNTAX Unsigned32(0..512) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of the input TS PID. " ::= { hwDocsQamInputTSPIDEntry 1 } -- 1.3.6.1.4.1.2011.6.187.39.1.2 hwDocsQamInputTSPIDList OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..1024)) MAX-ACCESS read-only STATUS current DESCRIPTION "Format: 2 bytes in network byte order, which indicates a PID. A maximum of 512 PIDs are supported. a 2-byte bit-field value defined as follows: Bit 0:xx Bit 1:xx. " ::= { hwDocsQamInputTSPIDEntry 2 } -- 1.3.6.1.4.1.2011.6.187.39.1.3 hwDocsQamInputTSPIDStateMask OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..1024)) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the PID list status mask of the input TS. The default value is an empty character string, indicating no PID list status mask. Format: 2 bytes in network byte order, which indicates a PID list status mask. A maximum of 512 PID list status masks are supported. a 2-byte bit-field value defined as follows: Bit 0:notScambled Bit 1:evenScambled Bit 2:oddScambled Bit 3:pcrreferenced Bit 4:ccerror. " ::= { hwDocsQamInputTSPIDEntry 3 } -- 1.3.6.1.4.1.2011.6.187.40 hwDocsQamLocationIDInsertionConfigObject OBJECT IDENTIFIER ::= { hwEqamAn 40 } -- 1.3.6.1.4.1.2011.6.187.40.1 hwDocsQamLocationIDInsertionSwitch OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the insertion function of the location ID. The default value is disabled(2). Options: 1. enabled(1) -indicates that the insertion function of the location ID is enabled. 2. disabled(2) -indicates that the insertion function of the location ID is disabled. " ::= { hwDocsQamLocationIDInsertionConfigObject 1 } -- 1.3.6.1.4.1.2011.6.187.40.2 hwDocsQamLocationIDInsertionPID OBJECT-TYPE SYNTAX Unsigned32 (3..15) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the PID for the insertion function of the location ID. Range: 3-15 Default: 14 " ::= { hwDocsQamLocationIDInsertionConfigObject 2 } -- 1.3.6.1.4.1.2011.6.187.40.3 hwDocsQamLocationIDInsertionInterval OBJECT-TYPE SYNTAX Unsigned32 (2..10) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the Tx interval for the insertion function of the location ID. Range: 2-10 Unit: second Default: 2 " ::= { hwDocsQamLocationIDInsertionConfigObject 3 } -- 1.3.6.1.4.1.2011.6.187.41 hwDocsQamLocationIDConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDocsQamLocationIDConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the location ID of a port on the extended subrack. The index of this table is ifIndex. " ::= { hwEqamAn 41 } -- 1.3.6.1.4.1.2011.6.187.41.1 hwDocsQamLocationIDConfigEntry OBJECT-TYPE SYNTAX HwDocsQamLocationIDConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the location ID of a port on the extended subrack. The index of this entry is ifIndex. " INDEX { ifIndex } ::= { hwDocsQamLocationIDConfigTable 1 } HwDocsQamLocationIDConfigEntry ::= SEQUENCE { hwDocsQamLocationID Unsigned32 } -- 1.3.6.1.4.1.2011.6.187.41.1.1 hwDocsQamLocationID OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the configured location ID. 4294967295 indicates the unconfigured location ID. Range: 0..4294967295 Default: 4294967295 " ::= { hwDocsQamLocationIDConfigEntry 1 } -- 1.3.6.1.4.1.2011.6.187.42 hwDocsQamInputTSProgramEsTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDocsQamInputTSProgramEsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the program elementary stream (ES) table of an input TS, which is used to query the rate, maximum rate, minimum rate, number of CAs, CA PID list, and CA system ID list. The indexes of this table are hwDocsQamInputTSIndex, hwDocsQamInputTSProgramIndex and hwDocsQamInputTSProgramEsIndex. " ::= { hwEqamAn 42} -- 1.3.6.1.4.1.2011.6.187.42.1 hwDocsQamInputTSProgramEsEntry OBJECT-TYPE SYNTAX HwDocsQamInputTSProgramEsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the program elementary stream (ES) table of an input TS, which is used to query the rate, maximum rate, minimum rate, number of CAs, CA PID list, and CA system ID list. The indexes of this entry are hwDocsQamInputTSIndex, hwDocsQamInputTSProgramIndex and hwDocsQamInputTSProgramEsIndex. " INDEX { hwDocsQamInputTSIndex, hwDocsQamInputTSProgramIndex, hwDocsQamInputTSProgramEsIndex } ::= { hwDocsQamInputTSProgramEsTable 1 } HwDocsQamInputTSProgramEsEntry ::= SEQUENCE { hwDocsQamInputTSProgramEsIndex Unsigned32, hwDocsQamInputTSProgramEsType Integer32, hwDocsQamInputTSProgramEsPID Unsigned32, hwDocsQamInputTSProgramEsRate Unsigned32, hwDocsQamInputTSProgramEsMaxRate Unsigned32, hwDocsQamInputTSProgramEsMinRate Unsigned32, hwDocsQamInputTSProgramEsCaNumber Unsigned32, hwDocsQamInputTSProgramEsCaPIDList OCTET STRING, hwDocsQamInputTSProgramEsCaSystemIDList OCTET STRING } -- 1.3.6.1.4.1.2011.6.187.42.1.1 hwDocsQamInputTSProgramEsIndex OBJECT-TYPE SYNTAX Unsigned32(1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the index of program ES in input TS. " ::= { hwDocsQamInputTSProgramEsEntry 1 } -- 1.3.6.1.4.1.2011.6.187.42.1.2 hwDocsQamInputTSProgramEsType OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the type of program ES in input TS. For details about its value, see ISO/IEC 13818-1 [18] Program Map Table (PMT). The default value is 0. " ::= { hwDocsQamInputTSProgramEsEntry 2 } -- 1.3.6.1.4.1.2011.6.187.42.1.3 hwDocsQamInputTSProgramEsPID OBJECT-TYPE SYNTAX Unsigned32(0..8191) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the PID of program ES in input TS. " ::= { hwDocsQamInputTSProgramEsEntry 3 } -- 1.3.6.1.4.1.2011.6.187.42.1.4 hwDocsQamInputTSProgramEsRate OBJECT-TYPE SYNTAX Unsigned32(0..4294967295) UNITS "kbps" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the rate of program ES in input TS. Unit: kbit/s. The default value is 0. " ::= { hwDocsQamInputTSProgramEsEntry 4 } -- 1.3.6.1.4.1.2011.6.187.42.1.5 hwDocsQamInputTSProgramEsMaxRate OBJECT-TYPE SYNTAX Unsigned32(0..4294967295) UNITS "kbps" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the maximum rate of program ES in input TS. Unit: kbit/s. The default value is 0. " ::= { hwDocsQamInputTSProgramEsEntry 5 } -- 1.3.6.1.4.1.2011.6.187.42.1.6 hwDocsQamInputTSProgramEsMinRate OBJECT-TYPE SYNTAX Unsigned32(0..4294967295) UNITS "kbps" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the minimum rate of program ES in input TS. Unit: kbit/s. The default value is 0. " ::= { hwDocsQamInputTSProgramEsEntry 6 } -- 1.3.6.1.4.1.2011.6.187.42.1.7 hwDocsQamInputTSProgramEsCaNumber OBJECT-TYPE SYNTAX Unsigned32(0..4) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the CA number of program ES in input TS. " ::= { hwDocsQamInputTSProgramEsEntry 7 } -- 1.3.6.1.4.1.2011.6.187.42.1.8 hwDocsQamInputTSProgramEsCaPIDList OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..8)) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the CA PID list of an input program ES. A PID is displayed as a 2-byte string in network order. A maximum of 4 CAs are supported. The default value is null string. " ::= { hwDocsQamInputTSProgramEsEntry 8 } -- 1.3.6.1.4.1.2011.6.187.42.1.9 hwDocsQamInputTSProgramEsCaSystemIDList OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..8)) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the CA system ID list of an input program ES. A CA system ID is displayed as a 2-byte string in network order. A maximum of 4 CAs are supported. " ::= { hwDocsQamInputTSProgramEsEntry 9 } -- 1.3.6.1.4.1.2011.6.187.43 hwDocsQamOutputTSTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDocsQamOutputTSEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the output TS table. The index of this table is ifIndex. " ::= { hwEqamAn 43 } -- 1.3.6.1.4.1.2011.6.187.43.1 hwDocsQamOutputTSEntry OBJECT-TYPE SYNTAX HwDocsQamOutputTSEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the output TS table. The index of this entry is ifIndex. " INDEX { ifIndex } ::= { hwDocsQamOutputTSTable 1 } HwDocsQamOutputTSEntry ::= SEQUENCE { hwDocsQamOutputTSProgramNumber Unsigned32, hwDocsQamOutputTSRate Unsigned32, hwDocsQamOutputTSMaxRate Unsigned32, hwDocsQamOutputTSMinRate Unsigned32, hwDocsQamOutputTSDiscards Counter64, hwDocsQamOutputTSEPG TruthValue, hwDocsQamOutputTSStatisticsOperMode INTEGER } -- 1.3.6.1.4.1.2011.6.187.43.1.1 hwDocsQamOutputTSProgramNumber OBJECT-TYPE SYNTAX Unsigned32(0..64) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the program number in output TS. " ::= { hwDocsQamOutputTSEntry 1 } -- 1.3.6.1.4.1.2011.6.187.43.1.2 hwDocsQamOutputTSRate OBJECT-TYPE SYNTAX Unsigned32(0..4294967295) UNITS "kbps" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the rate of program in output TS. Unit: kbit/s. The default value is 0. " ::= { hwDocsQamOutputTSEntry 2 } -- 1.3.6.1.4.1.2011.6.187.43.1.3 hwDocsQamOutputTSMaxRate OBJECT-TYPE SYNTAX Unsigned32(0..4294967295) UNITS "kbps" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the maximum rate of program in output TS. Unit: kbit/s. The default value is 0. " ::= { hwDocsQamOutputTSEntry 3 } -- 1.3.6.1.4.1.2011.6.187.43.1.4 hwDocsQamOutputTSMinRate OBJECT-TYPE SYNTAX Unsigned32(0..4294967295) UNITS "kbps" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the mininum rate of program in output TS. Unit: kbit/s. The default value is 0. " ::= { hwDocsQamOutputTSEntry 4 } -- 1.3.6.1.4.1.2011.6.187.43.1.5 hwDocsQamOutputTSDiscards OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the packet loss of output TS. " ::= { hwDocsQamOutputTSEntry 5 } -- 1.3.6.1.4.1.2011.6.187.43.1.6 hwDocsQamOutputTSEPG OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the transport stream is treated as the EPG input. The default value is false(2). " ::= { hwDocsQamOutputTSEntry 6 } -- 1.3.6.1.4.1.2011.6.187.43.1.7 hwDocsQamOutputTSStatisticsOperMode OBJECT-TYPE SYNTAX INTEGER{ clearStatistic(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Clear output TS statistics. Options: 1. clearStatistic(1) -indicates clearing the statistics of output TS. " ::= { hwDocsQamOutputTSEntry 7 } -- 1.3.6.1.4.1.2011.6.187.44 hwDocsQamOutputTSProgramEsTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDocsQamOutputTSProgramEsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the program elementary stream (ES) table of an output TS, which is used to query the rate, maximum rate, minimum rate, number of CAs, CA PID list, and CA system ID list. The indexes of this table are ifIndex, hwDocsQamOutputTSProgramIndex and hwDocsQamOutputTSProgramEsIndex. " ::= { hwEqamAn 44 } -- 1.3.6.1.4.1.2011.6.187.44.1 hwDocsQamOutputTSProgramEsEntry OBJECT-TYPE SYNTAX HwDocsQamOutputTSProgramEsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the program elementary stream (ES) table of an output TS, which is used to query the rate, maximum rate, minimum rate, number of CAs, CA PID list, and CA system ID list. The indexes of this entry are ifIndex, hwDocsQamOutputTSProgramIndex and hwDocsQamOutputTSProgramEsIndex. " INDEX { ifIndex, hwDocsQamOutputTSProgramIndex, hwDocsQamOutputTSProgramEsIndex } ::= { hwDocsQamOutputTSProgramEsTable 1 } HwDocsQamOutputTSProgramEsEntry ::= SEQUENCE { hwDocsQamOutputTSProgramEsIndex Unsigned32, hwDocsQamOutputTSProgramEsType Integer32, hwDocsQamOutputTSProgramEsPID Unsigned32, hwDocsQamOutputTSProgramEsRate Unsigned32, hwDocsQamOutputTSProgramEsMaxRate Unsigned32, hwDocsQamOutputTSProgramEsMinRate Unsigned32, hwDocsQamOutputTSProgramEsCaNumber Unsigned32, hwDocsQamOutputTSProgramEsCaPIDList OCTET STRING, hwDocsQamOutputTSProgramEsCaSystemIDList OCTET STRING } -- 1.3.6.1.4.1.2011.6.187.44.1.1 hwDocsQamOutputTSProgramEsIndex OBJECT-TYPE SYNTAX Unsigned32(1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the index of program ES in output TS. " ::= { hwDocsQamOutputTSProgramEsEntry 1 } -- 1.3.6.1.4.1.2011.6.187.44.1.2 hwDocsQamOutputTSProgramEsType OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the type of program ES in output TS. For details about its value, see ISO/IEC 13818-1 [18] Program Map Table (PMT). The default value is 0. " ::= { hwDocsQamOutputTSProgramEsEntry 2 } -- 1.3.6.1.4.1.2011.6.187.44.1.3 hwDocsQamOutputTSProgramEsPID OBJECT-TYPE SYNTAX Unsigned32(0..8191) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the PID of program ES in output TS. " ::= { hwDocsQamOutputTSProgramEsEntry 3 } -- 1.3.6.1.4.1.2011.6.187.44.1.4 hwDocsQamOutputTSProgramEsRate OBJECT-TYPE SYNTAX Unsigned32(0..4294967295) UNITS "kbps" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the rate of program ES in output TS. Unit: kbit/s. The default value is 0. " ::= { hwDocsQamOutputTSProgramEsEntry 4 } -- 1.3.6.1.4.1.2011.6.187.44.1.5 hwDocsQamOutputTSProgramEsMaxRate OBJECT-TYPE SYNTAX Unsigned32(0..4294967295) UNITS "kbps" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the maximum rate of program ES in output TS. Unit: kbit/s. The default value is 0. " ::= { hwDocsQamOutputTSProgramEsEntry 5 } -- 1.3.6.1.4.1.2011.6.187.44.1.6 hwDocsQamOutputTSProgramEsMinRate OBJECT-TYPE SYNTAX Unsigned32(0..4294967295) UNITS "kbps" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the minimum rate of program ES in output TS. Unit: kbit/s. The default value is 0. " ::= { hwDocsQamOutputTSProgramEsEntry 6 } -- 1.3.6.1.4.1.2011.6.187.44.1.7 hwDocsQamOutputTSProgramEsCaNumber OBJECT-TYPE SYNTAX Unsigned32(0..4) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the CA number of program ES in output TS. " ::= { hwDocsQamOutputTSProgramEsEntry 7 } -- 1.3.6.1.4.1.2011.6.187.44.1.8 hwDocsQamOutputTSProgramEsCaPIDList OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..8)) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the CA PID list of an output program ES. A PID is displayed as a 2-byte string in network order. A maximum of 4 CAs are supported. The default value is null string. " ::= { hwDocsQamOutputTSProgramEsEntry 8 } -- 1.3.6.1.4.1.2011.6.187.44.1.9 hwDocsQamOutputTSProgramEsCaSystemIDList OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..8)) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the CA system ID list of an output program ES. A CA system ID is displayed as a 2-byte string in network order. A maximum of 4 CAs are supported. " ::= { hwDocsQamOutputTSProgramEsEntry 9 } -- 1.3.6.1.4.1.2011.6.187.45 hwDocsQamOutputPIDInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDocsQamOutputPIDInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the output PID info table used to display the packet identifier (PID), PID type, PID subtype, PID rate, maximum PID rate, minimum PID rate, PID scrambling information, program clock reference (PCR) association of the PID, continuity counter (CC) error count of the PID, ID and name of the program associated with the PID of the output TS. The indexes of this table are ifIndex and hwDocsQamOutputPIDIndex. " ::= { hwEqamAn 45 } -- 1.3.6.1.4.1.2011.6.187.45.1 hwDocsQamOutputPIDInfoEntry OBJECT-TYPE SYNTAX HwDocsQamOutputPIDInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the output PID info table used to display the packet identifier (PID), PID type, PID subtype, PID rate, maximum PID rate, minimum PID rate, PID scrambling information, program clock reference (PCR) association of the PID, continuity counter (CC) error count of the PID, ID and name of the program associated with the PID of the output TS. The indexes of this entry are ifIndex and hwDocsQamOutputPIDIndex. " INDEX { ifIndex, hwDocsQamOutputPIDIndex } ::= { hwDocsQamOutputPIDInfoTable 1 } HwDocsQamOutputPIDInfoEntry ::= SEQUENCE { hwDocsQamOutputPIDIndex Unsigned32, hwDocsQamOutputPID Unsigned32, hwDocsQamOutputPIDType HwEqamInputPIDType, hwDocsQamOutputPIDStreamType Integer32, hwDocsQamOutputPIDRate Unsigned32, hwDocsQamOutputPIDMaxRate Unsigned32, hwDocsQamOutputPIDMinRate Unsigned32, hwDocsQamOutputPIDScambled INTEGER, hwDocsQamOutputPIDCCErrorCount Counter64, hwDocsQamOutputPIDPCRReference TruthValue, hwDocsQamOutputPIDProgramIDReference Unsigned32, hwDocsQamOutputPIDProgramNameReference OCTET STRING } -- 1.3.6.1.4.1.2011.6.187.45.1.1 hwDocsQamOutputPIDIndex OBJECT-TYPE SYNTAX Unsigned32(1..8192) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the output PID index, whose value is obtained by adding 1 to the value of hwDocsQamOutputPID. " ::= { hwDocsQamOutputPIDInfoEntry 1 } -- 1.3.6.1.4.1.2011.6.187.45.1.2 hwDocsQamOutputPID OBJECT-TYPE SYNTAX Unsigned32(0..8191) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the value of output PID. " ::= { hwDocsQamOutputPIDInfoEntry 2 } -- 1.3.6.1.4.1.2011.6.187.45.1.3 hwDocsQamOutputPIDType OBJECT-TYPE SYNTAX HwEqamInputPIDType MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the output PID type. The default value is unknown(255), indicating the unknown type. " ::= { hwDocsQamOutputPIDInfoEntry 3 } -- 1.3.6.1.4.1.2011.6.187.45.1.4 hwDocsQamOutputPIDStreamType OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "When the value of hwDocsQamOutputPIDStreamType is 12, hwDocsQamOutputPIDStreamType indicates the corresponding media type. For details about its value, see ISO/IEC 13818-1 [18] Program Map Table (PMT). Otherwise, the value of hwDocsQamOutputPIDStreamType is 0. " ::= { hwDocsQamOutputPIDInfoEntry 4 } -- 1.3.6.1.4.1.2011.6.187.45.1.5 hwDocsQamOutputPIDRate OBJECT-TYPE SYNTAX Unsigned32(0..4294967295) UNITS "kbps" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the rate of the output PID. Unit: kbit/s. " ::= { hwDocsQamOutputPIDInfoEntry 5 } -- 1.3.6.1.4.1.2011.6.187.45.1.6 hwDocsQamOutputPIDMaxRate OBJECT-TYPE SYNTAX Unsigned32(0..4294967295) UNITS "kbps" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the maximum rate of the output PID. Unit: kbit/s. " ::= { hwDocsQamOutputPIDInfoEntry 6 } -- 1.3.6.1.4.1.2011.6.187.45.1.7 hwDocsQamOutputPIDMinRate OBJECT-TYPE SYNTAX Unsigned32(0..4294967295) UNITS "kbps" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the minimum rate of the output PID. Unit: kbit/s. " ::= { hwDocsQamOutputPIDInfoEntry 7 } -- 1.3.6.1.4.1.2011.6.187.45.1.8 hwDocsQamOutputPIDScambled OBJECT-TYPE SYNTAX INTEGER { notScambled(1), evenScambled(2), oddScambled(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the output PID scrambling information. Options: 1. notScambled(1) --Indicates no scrambling 2. evenScambled(2) --Indicates scrambling with even control word (CW) 3. oddScambled(3) --Indicates scrambling with odd CW " ::= { hwDocsQamOutputPIDInfoEntry 8 } -- 1.3.6.1.4.1.2011.6.187.45.1.9 hwDocsQamOutputPIDCCErrorCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the CC error count of the output PID. " ::= { hwDocsQamOutputPIDInfoEntry 9 } -- 1.3.6.1.4.1.2011.6.187.45.1.10 hwDocsQamOutputPIDPCRReference OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the PCR association of the output PID. The default value is false. " ::= { hwDocsQamOutputPIDInfoEntry 10 } -- 1.3.6.1.4.1.2011.6.187.45.1.11 hwDocsQamOutputPIDProgramIDReference OBJECT-TYPE SYNTAX Unsigned32(0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the ID of the program associated with the PID. The default value is 4294967295, indicating no associated program. " ::= { hwDocsQamOutputPIDInfoEntry 11 } -- 1.3.6.1.4.1.2011.6.187.45.1.12 hwDocsQamOutputPIDProgramNameReference OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..63)) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the name of the program associated with the PID. The default value is an empty character string, indicating no associated program name.. " ::= { hwDocsQamOutputPIDInfoEntry 12 } -- 1.3.6.1.4.1.2011.6.187.46 hwDocsQamOutputTSPIDTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDocsQamOutputTSPIDEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the output TS PID table used to display the number of PIDs, PID list, and PID list status mask of the output TS. The index of this table is ifIndex. " ::= { hwEqamAn 46 } -- 1.3.6.1.4.1.2011.6.187.46.1 hwDocsQamOutputTSPIDEntry OBJECT-TYPE SYNTAX HwDocsQamOutputTSPIDEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the output TS PID table used to display the number of PIDs, PID list, and PID list status mask of the output TS. The index of this entry is ifIndex. " INDEX { ifIndex } ::= { hwDocsQamOutputTSPIDTable 1 } HwDocsQamOutputTSPIDEntry ::= SEQUENCE { hwDocsQamOutputTSPIDNumber Unsigned32, hwDocsQamOutputTSPIDList OCTET STRING, hwDocsQamOutputTSPIDStateMask OCTET STRING } -- 1.3.6.1.4.1.2011.6.187.46.1.1 hwDocsQamOutputTSPIDNumber OBJECT-TYPE SYNTAX Unsigned32(0..512) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of the output TS PID. " ::= { hwDocsQamOutputTSPIDEntry 1 } -- 1.3.6.1.4.1.2011.6.187.46.1.2 hwDocsQamOutputTSPIDList OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..1024)) MAX-ACCESS read-only STATUS current DESCRIPTION "Format: 2 bytes in network byte order, which indicates a PID. A maximum of 512 PIDs are supported. a 2-byte bit-field value defined as follows: Bit 0:xx Bit 1:xx. " ::= { hwDocsQamOutputTSPIDEntry 2 } -- 1.3.6.1.4.1.2011.6.187.46.1.3 hwDocsQamOutputTSPIDStateMask OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..1024)) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the PID list status mask of the output TS. The default value is an empty character string, indicating no PID list status mask. Format: 2 bytes in network byte order, which indicates a PID list status mask. A maximum of 512 PID list status masks are supported. a 2-byte bit-field value defined as follows: Bit 0:notScambled Bit 1:evenScambled Bit 2:oddScambled Bit 3:pcrreferenced Bit 4:ccerror. " ::= { hwDocsQamOutputTSPIDEntry 3 } -- 1.3.6.1.4.1.2011.6.187.47 hwDocsQamEPGTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDocsQamEPGEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates a table used to query the electronic program guide (EPG) status of a DVB video domain. The indexes of this table are ifIndex and hwDocsQamEPGProgramID. " ::= { hwEqamAn 47 } -- 1.3.6.1.4.1.2011.6.187.47.1 hwDocsQamEPGEntry OBJECT-TYPE SYNTAX HwDocsQamEPGEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates a table used to query the electronic program guide (EPG) status of a DVB video domain. The indexes of this entry are ifIndex and hwDocsQamEPGProgramID. " INDEX { ifIndex, hwDocsQamEPGProgramID } ::= { hwDocsQamEPGTable 1 } HwDocsQamEPGEntry ::= SEQUENCE { hwDocsQamEPGProgramID Unsigned32, hwDocsQamEPGProgramName OCTET STRING, hwDocsQamEPGProgramInputTSIndex Unsigned32, hwDocsQamEPGProgramInputProgramID Unsigned32, hwDocsQamEPGSourceTSIndex Unsigned32, hwDocsQamEPGSourceProgramID Unsigned32, hwDocsQamEPGPresentAndFollowingMatched TruthValue, hwDocsQamEPGScheduleMatched TruthValue } -- 1.3.6.1.4.1.2011.6.187.47.1.1 hwDocsQamEPGProgramID OBJECT-TYPE SYNTAX Unsigned32(1..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the output program ID. " ::= { hwDocsQamEPGEntry 1 } -- 1.3.6.1.4.1.2011.6.187.47.1.2 hwDocsQamEPGProgramName OBJECT-TYPE SYNTAX OCTET STRING(SIZE (0..63)) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the output program name. The default value is null string. " ::= { hwDocsQamEPGEntry 2 } -- 1.3.6.1.4.1.2011.6.187.47.1.3 hwDocsQamEPGProgramInputTSIndex OBJECT-TYPE SYNTAX Unsigned32(1..65535 | 4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the index of the input TS corresponding to a program. The default value is 4294967295, which indicates that no input TS is associated. " ::= { hwDocsQamEPGEntry 3 } -- 1.3.6.1.4.1.2011.6.187.47.1.4 hwDocsQamEPGProgramInputProgramID OBJECT-TYPE SYNTAX Unsigned32(1..65535 | 4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the input program id corresponding to a program. The default value is 4294967295, which indicates that no input program is associated. " ::= { hwDocsQamEPGEntry 4 } -- 1.3.6.1.4.1.2011.6.187.47.1.5 hwDocsQamEPGSourceTSIndex OBJECT-TYPE SYNTAX Unsigned32(1..65535 | 4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the index of the source TS corresponding to an EPG. The default value is 4294967295, which indicates that no input TS is associated. " ::= { hwDocsQamEPGEntry 5 } -- 1.3.6.1.4.1.2011.6.187.47.1.6 hwDocsQamEPGSourceProgramID OBJECT-TYPE SYNTAX Unsigned32(1..65535 | 4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the ID of the source program corresponding to an EPG. The default value is 4294967295, which indicates that no input program is associated. " ::= { hwDocsQamEPGEntry 6 } -- 1.3.6.1.4.1.2011.6.187.47.1.7 hwDocsQamEPGPresentAndFollowingMatched OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether an EPG matches the present/follow-up event information. true indicates that they are matched and the default value false indicates that they are not matched. " ::= { hwDocsQamEPGEntry 7 } -- 1.3.6.1.4.1.2011.6.187.47.1.8 hwDocsQamEPGScheduleMatched OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether an EPG matches event schedule information. true indicates that they are matched and the default value false indicates that they are not matched. " ::= { hwDocsQamEPGEntry 8 } -- 1.3.6.1.4.1.2011.6.187.48 hwDocsQamVODSummaryTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDocsQamVODSummaryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the video program abstract. The index of this table is ifIndex. " ::= { hwEqamAn 48 } -- 1.3.6.1.4.1.2011.6.187.48.1 hwDocsQamVODSummaryEntry OBJECT-TYPE SYNTAX HwDocsQamVODSummaryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the video program abstract. The index of this entry is ifIndex. " INDEX { ifIndex } ::= { hwDocsQamVODSummaryTable 1 } HwDocsQamVODSummaryEntry ::= SEQUENCE { hwDocsQamVODProgramNumberTotal Unsigned32, hwDocsQamVODProgramNumberOnline Unsigned32 } -- 1.3.6.1.4.1.2011.6.187.48.1.1 hwDocsQamVODProgramNumberTotal OBJECT-TYPE SYNTAX Unsigned32(0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of VOD programs on a RF port. " ::= { hwDocsQamVODSummaryEntry 1 } -- 1.3.6.1.4.1.2011.6.187.48.1.2 hwDocsQamVODProgramNumberOnline OBJECT-TYPE SYNTAX Unsigned32(0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of online VOD programs on a RF port. " ::= { hwDocsQamVODSummaryEntry 2 } -- 1.3.6.1.4.1.2011.6.187.49 hwDocsQamDVBChannelMonitoringControlTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDocsQamDVBChannelMonitoringControlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the table for DVB channel monitoring, which is used to configure channel monitoring locking and query the ID of the channel being monitored. The index of this table is ifIndex. " ::= { hwEqamAn 49 } -- 1.3.6.1.4.1.2011.6.187.49.1 hwDocsQamDVBChannelMonitoringControlEntry OBJECT-TYPE SYNTAX HwDocsQamDVBChannelMonitoringControlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the table for DVB channel monitoring, which is used to configure channel monitoring locking and query the ID of the channel being monitored. The index of this entry is ifIndex. " INDEX { ifIndex } ::= { hwDocsQamDVBChannelMonitoringControlTable 1 } HwDocsQamDVBChannelMonitoringControlEntry ::= SEQUENCE { hwDocsQamDVBChannelMonitoringControlCurrentChannelID Unsigned32, hwDocsQamDVBChannelMonitoringControlLockedChannelID Unsigned32 } -- 1.3.6.1.4.1.2011.6.187.49.1.1 hwDocsQamDVBChannelMonitoringControlCurrentChannelID OBJECT-TYPE SYNTAX Unsigned32(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the ID of the channel being monitored. The default value is 0, indicates that no channel is in the monitoring state. " ::= { hwDocsQamDVBChannelMonitoringControlEntry 1 } -- 1.3.6.1.4.1.2011.6.187.49.1.2 hwDocsQamDVBChannelMonitoringControlLockedChannelID OBJECT-TYPE SYNTAX Unsigned32(0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the ID of the channel locked by monitoring. The default value is 0, indicates that no channel is locked by monitoring. " ::= { hwDocsQamDVBChannelMonitoringControlEntry 2 } -- 1.3.6.1.4.1.2011.6.187.50 hwDocsQamDVBChannelMonitoringTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDocsQamDVBChannelMonitoringEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the DVB channel monitoring table, which is used to query the monitoring information and reset DVB monitoring. The index of this table is ifIndex. " ::= { hwEqamAn 50 } -- 1.3.6.1.4.1.2011.6.187.50.1 hwDocsQamDVBChannelMonitoringEntry OBJECT-TYPE SYNTAX HwDocsQamDVBChannelMonitoringEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the DVB channel monitoring table, which is used to query the monitoring information and reset DVB monitoring. The index of this entry is ifIndex. " INDEX { ifIndex } ::= { hwDocsQamDVBChannelMonitoringTable 1 } HwDocsQamDVBChannelMonitoringEntry ::= SEQUENCE { hwDocsQamChannelMonitoringRTPSequenceErrorCounter Counter64, hwDocsQamChannelMonitoringOperMode INTEGER, hwDocsQamChannelMonitoringPIDList OCTET STRING, hwDocsQamChannelMonitoringPIDStateMask OCTET STRING } -- 1.3.6.1.4.1.2011.6.187.50.1.1 hwDocsQamChannelMonitoringRTPSequenceErrorCounter OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates RTP error statistics of a monitored channel. " ::= { hwDocsQamDVBChannelMonitoringEntry 1 } -- 1.3.6.1.4.1.2011.6.187.50.1.2 hwDocsQamChannelMonitoringOperMode OBJECT-TYPE SYNTAX INTEGER{ reset(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates reseting channel monitoring. Options: 1. reset(1) -indicates reseting channel monitoring. " ::= { hwDocsQamDVBChannelMonitoringEntry 2 } -- 1.3.6.1.4.1.2011.6.187.50.1.3 hwDocsQamChannelMonitoringPIDList OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..512)) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the PID list of a monitored channel. The default value is null string. Format: 2 bytes in network byte order, which indicates a PID. A maximum of 256 PIDs are supported. " ::= { hwDocsQamDVBChannelMonitoringEntry 3 } -- 1.3.6.1.4.1.2011.6.187.50.1.4 hwDocsQamChannelMonitoringPIDStateMask OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..512)) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the PID list status mask of the monitoring channel. The default value is an empty character string. Format: 2 bytes in network byte order, which indicates a PID list status mask. A maximum of 256 PID list status masks are supported. A 2-byte bit-field value defined as follows: Bit 0:reserved Bit 1:reserved Bit 2:reserved Bit 3:reserved Bit 4:ccerror. " ::= { hwDocsQamDVBChannelMonitoringEntry 4 } -- 1.3.6.1.4.1.2011.6.187.51 hwDocsQamDVBChannelPidMonitoringTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDocsQamDVBChannelPidMonitoringEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates PID table for DVB channel monitoring. The indexes of this table are ifIndex and hwDocsQamDVBChannelMonitoringPIDIndex. " ::= { hwEqamAn 51 } -- 1.3.6.1.4.1.2011.6.187.51.1 hwDocsQamDVBChannelPidMonitoringEntry OBJECT-TYPE SYNTAX HwDocsQamDVBChannelPidMonitoringEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates PID table for DVB channel monitoring. The indexes of this entry are ifIndex and hwDocsQamDVBChannelMonitoringPIDIndex. " INDEX { ifIndex, hwDocsQamDVBChannelMonitoringPIDIndex } ::= { hwDocsQamDVBChannelPidMonitoringTable 1 } HwDocsQamDVBChannelPidMonitoringEntry ::= SEQUENCE { hwDocsQamDVBChannelMonitoringPIDIndex Unsigned32, hwDocsQamDVBChannelMonitoringPID Unsigned32, hwDocsQamDVBChannelMonitoringPIDCCErrorCount Counter64 } -- 1.3.6.1.4.1.2011.6.187.51.1.1 hwDocsQamDVBChannelMonitoringPIDIndex OBJECT-TYPE SYNTAX Unsigned32(1..8192) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates PID index of a DVB monitoring channel. " ::= { hwDocsQamDVBChannelPidMonitoringEntry 1 } -- 1.3.6.1.4.1.2011.6.187.51.1.2 hwDocsQamDVBChannelMonitoringPID OBJECT-TYPE SYNTAX Unsigned32(0..8191) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the PID of a DVB monitoring channel. " ::= { hwDocsQamDVBChannelPidMonitoringEntry 2 } -- 1.3.6.1.4.1.2011.6.187.51.1.3 hwDocsQamDVBChannelMonitoringPIDCCErrorCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of PID CC errors of a DVB monitoring channel. " ::= { hwDocsQamDVBChannelPidMonitoringEntry 3 } -- 1.3.6.1.4.1.2011.6.187.52 hwDocsQamETR290MonitoringObj OBJECT IDENTIFIER ::= { hwEqamAn 52 } -- 1.3.6.1.4.1.2011.6.187.52.1 hwDocsQamETR290MonitoringCurrentTSIndex OBJECT-TYPE SYNTAX Unsigned32(0..65535 | 4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the index of the input TS being monitored. The default value is 4294967295, indicating that no input TS is in the monitoring state. " ::= { hwDocsQamETR290MonitoringObj 1 } -- 1.3.6.1.4.1.2011.6.187.52.2 hwDocsQamETR290MonitoringLockedTSIndex OBJECT-TYPE SYNTAX Unsigned32(0..65535 | 4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the index of the input TS being locked by monitoring. The default value is 4294967295, indicating that no input TS is locked by monitoring. " ::= { hwDocsQamETR290MonitoringObj 2 } -- 1.3.6.1.4.1.2011.6.187.53 hwDocsQamETR290MonitoringProfileTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDocsQamETR290MonitoringProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the ETR290 monitoring profile table. The index of this table is hwDocsQamETR290MonitoringProfileName. " ::= { hwEqamAn 53 } -- 1.3.6.1.4.1.2011.6.187.53.1 hwDocsQamETR290MonitoringProfileEntry OBJECT-TYPE SYNTAX HwDocsQamETR290MonitoringProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the ETR290 monitoring profile table. The index of this entry is hwDocsQamETR290MonitoringProfileName. " INDEX { hwDocsQamETR290MonitoringProfileName } ::= { hwDocsQamETR290MonitoringProfileTable 1 } HwDocsQamETR290MonitoringProfileEntry ::= SEQUENCE { hwDocsQamETR290MonitoringProfileName OCTET STRING, hwDocsQamETR290MonitoringEnableMask BITS, hwDocsQamETR290MonitoringAlarmEnableMask BITS, hwDocsQamETR290MonitoringErrorTimeout Unsigned32, hwDocsQamETR290MonitoringAlarmDetectTime Unsigned32, hwDocsQamETR290MonitoringProbeDuration Unsigned32, hwDocsQamETR290MonitoringTsSyncLossDetectTime Unsigned32, hwDocsQamETR290MonitoringPATInterval Unsigned32, hwDocsQamETR290MonitoringPMTInterval Unsigned32, hwDocsQamETR290MonitoringPIDLossThreshold Unsigned32, hwDocsQamETR290MonitoringPCRInterval Unsigned32, hwDocsQamETR290MonitoringPCRDiscontinuityThreshold Unsigned32, hwDocsQamETR290MonitoringPCRAccuracyJitterThreshold Unsigned32, hwDocsQamETR290MonitoringCATInterval Unsigned32, hwDocsQamETR290MonitoringRowStatus RowStatus } -- 1.3.6.1.4.1.2011.6.187.53.1.1 hwDocsQamETR290MonitoringProfileName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..15)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the ETR290 monitoring profile name. " ::= { hwDocsQamETR290MonitoringProfileEntry 1 } -- 1.3.6.1.4.1.2011.6.187.53.1.2 hwDocsQamETR290MonitoringEnableMask OBJECT-TYPE SYNTAX BITS { tsSyncLoss(0), syncByteError(1), patError(2), ccError(3), pmtError(4), pidError(5), transportError(6), crcError(7), pcrError(8), pcrAccuracyError(9), catError(10) } MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the mask of ETR290 monitoring. 1 indicates enabled and 0 indicates disabled. By default, patError and pmtError are enabled. " ::= { hwDocsQamETR290MonitoringProfileEntry 2 } -- 1.3.6.1.4.1.2011.6.187.53.1.3 hwDocsQamETR290MonitoringAlarmEnableMask OBJECT-TYPE SYNTAX BITS { tsSyncLossAlarm(0), syncByteErrorAlarm(1), patErrorAlarm(2), ccErrorAlarm(3), pmtErrorAlarm(4), pidErrorAlarm(5), transportErrorAlarm(6), crcErrorAlarm(7), pcrErrorAlarm(8), pcrAccuracyErroAlarmr(9), catErrorAlarm(10) } MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the alarm mask of ETR290 monitoring. 1 indicates enabled and 0 indicates disabled. By default, patErrorAlarm and pmtErrorAlarm are enabled. " ::= { hwDocsQamETR290MonitoringProfileEntry 3 } -- 1.3.6.1.4.1.2011.6.187.53.1.4 hwDocsQamETR290MonitoringErrorTimeout OBJECT-TYPE SYNTAX Unsigned32(10..60) UNITS "second" MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the error timeout time of ETR290 monitoring. The default value is 10. " ::= { hwDocsQamETR290MonitoringProfileEntry 4 } -- 1.3.6.1.4.1.2011.6.187.53.1.5 hwDocsQamETR290MonitoringAlarmDetectTime OBJECT-TYPE SYNTAX Unsigned32(10..30) UNITS "second" MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the alarm discovery time of ETR290 monitoring. The default value is 10. " ::= { hwDocsQamETR290MonitoringProfileEntry 5 } -- 1.3.6.1.4.1.2011.6.187.53.1.6 hwDocsQamETR290MonitoringProbeDuration OBJECT-TYPE SYNTAX Unsigned32(60..120) UNITS "second" MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the probe duration of ETR290 monitoring. The default value is 70. " ::= { hwDocsQamETR290MonitoringProfileEntry 6 } -- 1.3.6.1.4.1.2011.6.187.53.1.7 hwDocsQamETR290MonitoringTsSyncLossDetectTime OBJECT-TYPE SYNTAX Unsigned32(15..60) UNITS "second" MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the discovery time of TS synchronization loss in ETR290 monitoring. The default value is 15. " ::= { hwDocsQamETR290MonitoringProfileEntry 7 } -- 1.3.6.1.4.1.2011.6.187.53.1.8 hwDocsQamETR290MonitoringPATInterval OBJECT-TYPE SYNTAX Unsigned32(500..1000) UNITS "millisecond" MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the PAT detection period in ETR290 monitoring. The default value is 500. " ::= { hwDocsQamETR290MonitoringProfileEntry 8 } -- 1.3.6.1.4.1.2011.6.187.53.1.9 hwDocsQamETR290MonitoringPMTInterval OBJECT-TYPE SYNTAX Unsigned32(500..1000) UNITS "millisecond" MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the PMT detection period in ETR290 monitoring. The default value is 500. " ::= { hwDocsQamETR290MonitoringProfileEntry 9 } -- 1.3.6.1.4.1.2011.6.187.53.1.10 hwDocsQamETR290MonitoringPIDLossThreshold OBJECT-TYPE SYNTAX Unsigned32(5..10) UNITS "second" MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the detection threshold for PID loss in ETR290 monitoring. The default value is 5. " ::= { hwDocsQamETR290MonitoringProfileEntry 10 } -- 1.3.6.1.4.1.2011.6.187.53.1.11 hwDocsQamETR290MonitoringPCRInterval OBJECT-TYPE SYNTAX Unsigned32(40..500) UNITS "millisecond" MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the PCR detection period in ETR290 monitoring. The default value is 40. " ::= { hwDocsQamETR290MonitoringProfileEntry 11 } -- 1.3.6.1.4.1.2011.6.187.53.1.12 hwDocsQamETR290MonitoringPCRDiscontinuityThreshold OBJECT-TYPE SYNTAX Unsigned32(100..500) UNITS "millisecond" MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the PCR difference threshold in ETR290 monitoring. The default value is 100. " ::= { hwDocsQamETR290MonitoringProfileEntry 12 } -- 1.3.6.1.4.1.2011.6.187.53.1.13 hwDocsQamETR290MonitoringPCRAccuracyJitterThreshold OBJECT-TYPE SYNTAX Unsigned32(500..1000) UNITS "nanosecond" MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the PCR precise jitter threshold in ETR290 monitoring. The default value is 500. " ::= { hwDocsQamETR290MonitoringProfileEntry 13 } -- 1.3.6.1.4.1.2011.6.187.53.1.14 hwDocsQamETR290MonitoringCATInterval OBJECT-TYPE SYNTAX Unsigned32(500..2000) UNITS "nanosecond" MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the CAT detection period in ETR290 monitoring. The default value is 500. " ::= { hwDocsQamETR290MonitoringProfileEntry 14 } -- 1.3.6.1.4.1.2011.6.187.53.1.255 hwDocsQamETR290MonitoringRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row status, used to query, create, modify, and delete a input TS table. It supports the active(1), createAndGo(4), and destroy(6) operations. During query, the value of this leaf is always active(1). During deletion, specify the value of this leaf to destroy(6). During creation, specify the value of this leaf to createAndGo(4). To modify the parameters of a channel profile table, this leaf need not be issued together. Options: 1. active(1) -indicates the query operation 2. createAndGo(4) -indicates the creating operation 3. destroy(6) -indicates the deleting operation " ::= { hwDocsQamETR290MonitoringProfileEntry 255 } -- 1.3.6.1.4.1.2011.6.187.54 hwDocsQamETR290MonitoringInputTSTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDocsQamETR290MonitoringInputTSEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the ETR290 monitoring information table of an input TS. The index of this table is hwDocsQamInputTSIndex. " ::= { hwEqamAn 54 } -- 1.3.6.1.4.1.2011.6.187.54.1 hwDocsQamETR290MonitoringInputTSEntry OBJECT-TYPE SYNTAX HwDocsQamETR290MonitoringInputTSEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the ETR290 monitoring information table of an input TS. The index of this entry is hwDocsQamInputTSIndex. " INDEX { hwDocsQamInputTSIndex } ::= { hwDocsQamETR290MonitoringInputTSTable 1 } HwDocsQamETR290MonitoringInputTSEntry ::= SEQUENCE { hwDocsQamInputTSETR290MonitoringEnable TruthValue, hwDocsQamInputTSETR290MonitoringProfileName OCTET STRING, hwDocsQamInputTSETR290MonitoringClearStatus INTEGER } -- 1.3.6.1.4.1.2011.6.187.54.1.1 hwDocsQamInputTSETR290MonitoringEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the ETR290 monitoring enabling status of an input TS. The default value is false(2). " ::= { hwDocsQamETR290MonitoringInputTSEntry 1 } -- 1.3.6.1.4.1.2011.6.187.54.1.2 hwDocsQamInputTSETR290MonitoringProfileName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..15)) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the ETR290 monitoring profile name. " ::= { hwDocsQamETR290MonitoringInputTSEntry 2 } -- 1.3.6.1.4.1.2011.6.187.54.1.3 hwDocsQamInputTSETR290MonitoringClearStatus OBJECT-TYPE SYNTAX INTEGER{ clear(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates clearing the ETR290 detection status of an input TS. Options: 1. clear(1) -indicates clearing the ETR290 detection status of an input TS. " ::= { hwDocsQamETR290MonitoringInputTSEntry 3 } -- 1.3.6.1.4.1.2011.6.187.55 hwDocsQamInputTSETR290DetailsTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDocsQamInputTSETR290DetailsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the detailed ETR290 monitoring information table of an input TS. The indexes of this table are hwDocsQamInputTSIndex and hwDocsQamInputTSETR290MonitoringType. " ::= { hwEqamAn 55 } -- 1.3.6.1.4.1.2011.6.187.55.1 hwDocsQamInputTSETR290DetailsEntry OBJECT-TYPE SYNTAX HwDocsQamInputTSETR290DetailsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the detailed ETR290 monitoring information table of an input TS. The indexes of this entry are hwDocsQamInputTSIndex and hwDocsQamInputTSETR290MonitoringType. " INDEX { hwDocsQamInputTSIndex, hwDocsQamInputTSETR290MonitoringType } ::= { hwDocsQamInputTSETR290DetailsTable 1 } HwDocsQamInputTSETR290DetailsEntry ::= SEQUENCE { hwDocsQamInputTSETR290MonitoringType INTEGER, hwDocsQamInputTSETR290MonitoringState INTEGER, hwDocsQamInputTSETR290MonitoringLastErrorIndication INTEGER, hwDocsQamInputTSETR290MonitoringLastErrorOccurTime TimeTicks, hwDocsQamInputTSETR290MonitoringCurrentErrorCount Counter64, hwDocsQamInputTSETR290MonitoringTotalErrorCount Counter64 } -- 1.3.6.1.4.1.2011.6.187.55.1.1 hwDocsQamInputTSETR290MonitoringType OBJECT-TYPE SYNTAX INTEGER { tsSyncLoss(1), syncByteError(2), patError(3), ccError(4), pmtError(5), pidError(6), transportError(7), crcError(8), pcrError(9), pcrAccuracyError(10), catError(11) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the ETR290 monitoring type of an input TS. Options: 1. tsSyncLoss(1) --TS sync loss 2. syncByteError(2) --Sync byte error 3. patError(3) --PAT error 4. ccError(4) --Continuity count error 5. pmtError(5) --PMT error 6. pidError(6) --PID error 7. transportError(7) --Transport error 8. crcError(8) --CRC error 9. pcrError(9) --PCR error 10. pcrAccuracyError(10) --PCR accuracy error 11. catError(11) --CAT error " ::= { hwDocsQamInputTSETR290DetailsEntry 1 } -- 1.3.6.1.4.1.2011.6.187.55.1.2 hwDocsQamInputTSETR290MonitoringState OBJECT-TYPE SYNTAX INTEGER { ok(1), alarm(2), unknown(3), disable(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the ETR290 monitoring status of an input TS. Options: 1. ok(1) --No error 2. alarm(2) --Have error 3. unknown(3) --Monitoring 4. disable(4) --ETR290 monitor disable The default value is unknown(3). " ::= { hwDocsQamInputTSETR290DetailsEntry 2 } -- 1.3.6.1.4.1.2011.6.187.55.1.3 hwDocsQamInputTSETR290MonitoringLastErrorIndication OBJECT-TYPE SYNTAX INTEGER { now(1), never(2), last(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the last error indication of ETR290 monitoring for an input TS. Options: 1. now(1) --Now 2. never(2) --No error 3. last(3) --Last error 4. The default value is never(2). " ::= { hwDocsQamInputTSETR290DetailsEntry 3 } -- 1.3.6.1.4.1.2011.6.187.55.1.4 hwDocsQamInputTSETR290MonitoringLastErrorOccurTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the difference between the time when ETR290 monitoring of an input TS has an error and the current time. The default value is 0. " ::= { hwDocsQamInputTSETR290DetailsEntry 4 } -- 1.3.6.1.4.1.2011.6.187.55.1.5 hwDocsQamInputTSETR290MonitoringCurrentErrorCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the error count of the current probe in ETR290 monitoring for an input TS. " ::= { hwDocsQamInputTSETR290DetailsEntry 5 } -- 1.3.6.1.4.1.2011.6.187.55.1.6 hwDocsQamInputTSETR290MonitoringTotalErrorCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the total error count in ETR290 monitoring for an input TS. " ::= { hwDocsQamInputTSETR290DetailsEntry 6 } -- 1.3.6.1.4.1.2011.6.187.56 hwDocsQamInputPIDETR290DetailsTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDocsQamInputPIDETR290DetailsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the detailed ETR290 monitoring information table for the PID of an input TS. The indexes of this table are hwDocsQamInputTSIndex, hwDocsQamInputTSETR290MonitoringType, hwDocsQamInputPIDETR290DetailsPIDIndex and hwDocsQamInputPIDETR290DetailsTableIndex. " ::= { hwEqamAn 56 } -- 1.3.6.1.4.1.2011.6.187.56.1 hwDocsQamInputPIDETR290DetailsEntry OBJECT-TYPE SYNTAX HwDocsQamInputPIDETR290DetailsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the detailed ETR290 monitoring information table for the PID of an input TS. The indexes of this entry are hwDocsQamInputTSIndex, hwDocsQamInputTSETR290MonitoringType, hwDocsQamInputPIDETR290DetailsPIDIndex and hwDocsQamInputPIDETR290DetailsTableIndex. " INDEX { hwDocsQamInputTSIndex, hwDocsQamInputTSETR290MonitoringType, hwDocsQamInputPIDETR290DetailsPIDIndex, hwDocsQamInputPIDETR290DetailsTableIndex } ::= { hwDocsQamInputPIDETR290DetailsTable 1 } HwDocsQamInputPIDETR290DetailsEntry ::= SEQUENCE { hwDocsQamInputPIDETR290DetailsPIDIndex Unsigned32, hwDocsQamInputPIDETR290DetailsTableIndex Unsigned32, hwDocsQamInputPIDETR290DetailsPID Unsigned32, hwDocsQamInputPIDETR290DetailsTableID Unsigned32, hwDocsQamInputPIDETR290MonitoringState INTEGER, hwDocsQamInputPIDETR290MonitoringLastErrorIndication INTEGER, hwDocsQamInputPIDETR290MonitoringLastErrorOccurTime TimeTicks, hwDocsQamInputPIDETR290MonitoringCurrentErrorCount Counter64, hwDocsQamInputPIDETR290MonitoringCurrentRecv TruthValue, hwDocsQamInputPIDETR290MonitoringRecvCount Counter64, hwDocsQamInputPIDETR290MonitoringPCRDiscontinuity Unsigned32, hwDocsQamInputPIDETR290MonitoringPCRDiscontinuityMax Unsigned32, hwDocsQamInputPIDETR290MonitoringPCRAccuracyJitter Unsigned32, hwDocsQamInputPIDETR290MonitoringPCRAccuracyJitterMax Unsigned32 } -- 1.3.6.1.4.1.2011.6.187.56.1.1 hwDocsQamInputPIDETR290DetailsPIDIndex OBJECT-TYPE SYNTAX Unsigned32(1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the PID index of an input TS. " ::= { hwDocsQamInputPIDETR290DetailsEntry 1 } -- 1.3.6.1.4.1.2011.6.187.56.1.2 hwDocsQamInputPIDETR290DetailsTableIndex OBJECT-TYPE SYNTAX Unsigned32(1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the PID table index of an input TS. " ::= { hwDocsQamInputPIDETR290DetailsEntry 2 } -- 1.3.6.1.4.1.2011.6.187.56.1.3 hwDocsQamInputPIDETR290DetailsPID OBJECT-TYPE SYNTAX Unsigned32(0..8191|4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the PID value of an input TS. " ::= { hwDocsQamInputPIDETR290DetailsEntry 3 } -- 1.3.6.1.4.1.2011.6.187.56.1.4 hwDocsQamInputPIDETR290DetailsTableID OBJECT-TYPE SYNTAX Unsigned32(0..255|4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the PID table ID of an input TS. " ::= { hwDocsQamInputPIDETR290DetailsEntry 4 } -- 1.3.6.1.4.1.2011.6.187.56.1.5 hwDocsQamInputPIDETR290MonitoringState OBJECT-TYPE SYNTAX INTEGER { ok(1), alarm(2), unknown(3), disable(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the ETR290 monitoring status of the PID of an input TS. Options: 1. ok(1) --No error 2. alarm(2) --Have error 3. unknown(3) --Monitoring 4. disable(4) --ETR290 monitor disable The default value is unknown(3). " ::= { hwDocsQamInputPIDETR290DetailsEntry 5 } -- 1.3.6.1.4.1.2011.6.187.56.1.6 hwDocsQamInputPIDETR290MonitoringLastErrorIndication OBJECT-TYPE SYNTAX INTEGER { now(1), never(2), last(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the last error indication of ETR290 monitoring for the PID of an input TS. Options: 1. now(1) --Now 2. never(2) --No error 3. last(3) --Last error 4. The default value is never(2). " ::= { hwDocsQamInputPIDETR290DetailsEntry 6 } -- 1.3.6.1.4.1.2011.6.187.56.1.7 hwDocsQamInputPIDETR290MonitoringLastErrorOccurTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the difference between the time when ETR290 monitoring of the PID of an input TS has an error and the current time. The default value is 0. " ::= { hwDocsQamInputPIDETR290DetailsEntry 7 } -- 1.3.6.1.4.1.2011.6.187.56.1.8 hwDocsQamInputPIDETR290MonitoringCurrentErrorCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the error count of the current probe in ETR290 monitoring for the PID of an input TS. " ::= { hwDocsQamInputPIDETR290DetailsEntry 8 } -- 1.3.6.1.4.1.2011.6.187.56.1.9 hwDocsQamInputPIDETR290MonitoringCurrentRecv OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the ETR290 monitoring probe for the PID of an input TS receives packets. The default value is false(2). " ::= { hwDocsQamInputPIDETR290DetailsEntry 9 } -- 1.3.6.1.4.1.2011.6.187.56.1.10 hwDocsQamInputPIDETR290MonitoringRecvCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of packets received in ETR290 monitoring for the PID of an input TS. " ::= { hwDocsQamInputPIDETR290DetailsEntry 10 } -- 1.3.6.1.4.1.2011.6.187.56.1.11 hwDocsQamInputPIDETR290MonitoringPCRDiscontinuity OBJECT-TYPE SYNTAX Unsigned32(0..4294967295) UNITS "millisecond" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the PCR discontinuity in ETR290 monitoring for the PID of an input TS. The default value is 0, indicating that the PCR discontinuity is invalid. " ::= { hwDocsQamInputPIDETR290DetailsEntry 11 } -- 1.3.6.1.4.1.2011.6.187.56.1.12 hwDocsQamInputPIDETR290MonitoringPCRDiscontinuityMax OBJECT-TYPE SYNTAX Unsigned32(0..4294967295) UNITS "millisecond" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the maximum PCR discontinuity in ETR290 monitoring for the PID of an input TS. The default value is 0, indicating that the maximum PCR discontinuity is invalid. " ::= { hwDocsQamInputPIDETR290DetailsEntry 12 } -- 1.3.6.1.4.1.2011.6.187.56.1.13 hwDocsQamInputPIDETR290MonitoringPCRAccuracyJitter OBJECT-TYPE SYNTAX Unsigned32(0..4294967295) UNITS "nanosecond" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the PCR accuracy jitter in ETR290 monitoring for the PID of an input TS. The default value is 0, indicating that the PCR accuracy jitter is invalid. " ::= { hwDocsQamInputPIDETR290DetailsEntry 13 } -- 1.3.6.1.4.1.2011.6.187.56.1.14 hwDocsQamInputPIDETR290MonitoringPCRAccuracyJitterMax OBJECT-TYPE SYNTAX Unsigned32(0..4294967295) UNITS "nanosecond" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the maximum PCR accuracy jitter in ETR290 monitoring for the PID of an input TS. The default value is 0, indicating that the maximum PCR accuracy jitter is invalid. " ::= { hwDocsQamInputPIDETR290DetailsEntry 14 } -- the traps VbOids hwDocsQamNotificationObject OBJECT IDENTIFIER ::= { hwEqamAn 24 } hwDocsQamNotificationProgramID OBJECT-TYPE SYNTAX Integer32(1..65535) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Program ID." ::= { hwDocsQamNotificationObject 1 } hwDocsQamNotificationPID OBJECT-TYPE SYNTAX Integer32(0..8190) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "PID." ::= { hwDocsQamNotificationObject 2 } hwDocsQamNotificationPSIType OBJECT-TYPE SYNTAX INTEGER { pat(1), cat(2), pmt(3), nit(4), sdt(5), eit(6), tdttot(7) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Indicates the program stream type. Options: 1. pat(1) --Program Association Table 2. cat(2) --Conditional Access Table 3. pmt(3) --Program Map Table 4. nit(4) --Network Information Table 5. sdt(5) --Service Description Table 6. eit(6) --Event Information Table 7. tdttot(7) --Time and Date Table/Time Offset Table " ::= { hwDocsQamNotificationObject 3 } hwDocsQamNotificationProgramName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..63)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Indicate the program name. " ::= { hwDocsQamNotificationObject 4 } hwDocsQamDVBPATErrorTrap NOTIFICATION-TYPE OBJECTS { hwDocsQamInputTSIndex } STATUS current DESCRIPTION "The hwDocsQamDVBPATErrorTrap will be sent when the content of input PAT is incorrect. " ::= { hwEqamAn 25 } hwDocsQamDVBPATMissingTrap NOTIFICATION-TYPE OBJECTS { hwDocsQamInputTSIndex } STATUS current DESCRIPTION "The hwDocsQamDVBPATMissingTrap will be sent when PAT is missing. " ::= { hwEqamAn 26 } hwDocsQamDVBPMTErrorTrap NOTIFICATION-TYPE OBJECTS { hwDocsQamInputTSIndex, hwDocsQamNotificationProgramID, hwDocsQamNotificationPID } STATUS current DESCRIPTION "The hwDocsQamDVBPMTErrorTrap will be sent when the content of input PMT is incorrect. " ::= { hwEqamAn 27 } hwDocsQamDVBPMTMissingTrap NOTIFICATION-TYPE OBJECTS { hwDocsQamInputTSIndex, hwDocsQamNotificationProgramID, hwDocsQamNotificationPID } STATUS current DESCRIPTION "The hwDocsQamDVBPMTMissingTrap will be sent when PMT is missing. " ::= { hwEqamAn 28 } hwDocsQamDVBContinutyCounterErrorTrap NOTIFICATION-TYPE OBJECTS { hwDocsQamInputTSIndex } STATUS current DESCRIPTION "The hwDocsQamDVBContinutyCounterErrorTrap will be sent when the continuity counter error rate is too high. " ::= { hwEqamAn 29 } hwDocsQamDVBRTPSequenceErrorTrap NOTIFICATION-TYPE OBJECTS { hwDocsQamInputTSIndex } STATUS current DESCRIPTION "The hwDocsQamDVBRTPSequenceErrorTrap will be sent when the counter of RTP sequence error reaches the uplimit. " ::= { hwEqamAn 36 } hwDocsQamETR290MonitoringAlarmTsSyncLossTrap NOTIFICATION-TYPE OBJECTS { hwDocsQamInputTSIndex } STATUS current DESCRIPTION "The hwDocsQamETR290MonitoringAlarmTsSyncLossTrap will be sent when the TS loss of synchronization. " ::= { hwEqamAn 57 } hwDocsQamETR290MonitoringAlarmSyncByteErrorTrap NOTIFICATION-TYPE OBJECTS { hwDocsQamInputTSIndex } STATUS current DESCRIPTION "The hwDocsQamETR290MonitoringAlarmSyncByteErrorTrap will be sent when the TS sync_byte not equal 0x47. " ::= { hwEqamAn 58 } hwDocsQamETR290MonitoringAlarmPATErrorTrap NOTIFICATION-TYPE OBJECTS { hwDocsQamInputTSIndex, hwDocsQamNotificationPID } STATUS current DESCRIPTION "The hwDocsQamETR290MonitoringAlarmPATErrorTrap will be sent when the PID 0x0000 does not occur at least every specified interval. " ::= { hwEqamAn 59 } hwDocsQamETR290MonitoringAlarmContinuitycountErrorTrap NOTIFICATION-TYPE OBJECTS { hwDocsQamInputTSIndex, hwDocsQamNotificationPID } STATUS current DESCRIPTION "The hwDocsQamETR290MonitoringAlarmContinuitycountErrorTrap will be sent when the incorrect packet order a packet occurs more than twice. " ::= { hwEqamAn 60 } hwDocsQamETR290MonitoringAlarmPMTErrorTrap NOTIFICATION-TYPE OBJECTS { hwDocsQamInputTSIndex, hwDocsQamNotificationPID, hwDocsQamNotificationProgramID, hwDocsQamNotificationProgramName } STATUS current DESCRIPTION "The hwDocsQamETR290MonitoringAlarmPMTErrorTrap will be sent when the sections with table_id 0x02 , do not occur at least every specified interval on the PID which is referred to in the PAT. " ::= { hwEqamAn 61 } hwDocsQamETR290MonitoringAlarmPIDErrorTrap NOTIFICATION-TYPE OBJECTS { hwDocsQamInputTSIndex, hwDocsQamNotificationPID, hwDocsQamNotificationProgramID, hwDocsQamNotificationProgramName } STATUS current DESCRIPTION "The hwDocsQamETR290MonitoringAlarmPIDErrorTrap will be sent when the referred PID does not occur for a user specified period. " ::= { hwEqamAn 62 } hwDocsQamETR290MonitoringAlarmTransportErrorTrap NOTIFICATION-TYPE OBJECTS { hwDocsQamInputTSIndex, hwDocsQamNotificationPID } STATUS current DESCRIPTION "The hwDocsQamETR290MonitoringAlarmTransportErrorTrap will be sent when the transport_error_indicator in the TS-Header is set to 1. " ::= { hwEqamAn 63 } hwDocsQamETR290MonitoringAlarmCRCErrorTrap NOTIFICATION-TYPE OBJECTS { hwDocsQamInputTSIndex, hwDocsQamNotificationPID, hwDocsQamNotificationPSIType } STATUS current DESCRIPTION "The hwDocsQamETR290MonitoringAlarmCRCErrorTrap will be sent when the CRC error occurred in CAT, PAT, PMT, NIT, EIT,BAT, SDT or TOT table. " ::= { hwEqamAn 64 } hwDocsQamETR290MonitoringAlarmPCRErrorTrap NOTIFICATION-TYPE OBJECTS { hwDocsQamInputTSIndex, hwDocsQamNotificationPID, hwDocsQamNotificationProgramID, hwDocsQamNotificationProgramName } STATUS current DESCRIPTION "The hwDocsQamETR290MonitoringAlarmPCRErrorTrap will be sent when PCR discontinuity of more than specified interval occurring without specific indication. " ::= { hwEqamAn 65 } hwDocsQamETR290MonitoringAlarmPCRAccuracyErrorTrap NOTIFICATION-TYPE OBJECTS { hwDocsQamInputTSIndex, hwDocsQamNotificationPID, hwDocsQamNotificationProgramID, hwDocsQamNotificationProgramName } STATUS current DESCRIPTION "The hwDocsQamETR290MonitoringAlarmPCRAccuracyErrorTrap will be sent when the PCR accuracy of selected programme is not within positive and negative 500 ns. " ::= { hwEqamAn 66 } hwDocsQamETR290MonitoringAlarmCATErrorTrap NOTIFICATION-TYPE OBJECTS { hwDocsQamInputTSIndex, hwDocsQamNotificationPID } STATUS current DESCRIPTION "The hwDocsQamETR290MonitoringAlarmCATErrorTrap will be sent when the packets with transport_scrambling_control not 00 present, but no section with table_id 0x01 present. " ::= { hwEqamAn 67 } hwDocsQamDVBPrimaryInputTSLossTrap NOTIFICATION-TYPE OBJECTS { hwDocsQamInputTSIndex, hwDocsQamInputTSIpAddressType, hwDocsQamInputTSMulticastIpAddress, hwDocsQamInputTSSourceIpAddress, hwDocsQamInputTSUdpPort } STATUS current DESCRIPTION "The hwDocsQamDVBPrimaryInputTSLossTrap will be sent when the primary input TS is lost. " ::= { hwEqamAn 68 } hwDocsQamDVBPrimaryInputTSRecoveryTrap NOTIFICATION-TYPE OBJECTS { hwDocsQamInputTSIndex, hwDocsQamInputTSIpAddressType, hwDocsQamInputTSMulticastIpAddress, hwDocsQamInputTSSourceIpAddress, hwDocsQamInputTSUdpPort } STATUS current DESCRIPTION "The hwDocsQamDVBPrimaryInputTSRecoveryTrap will be sent when the primary input TS recovers. " ::= { hwEqamAn 69 } hwDocsQamDVBSecondaryInputTSLossTrap NOTIFICATION-TYPE OBJECTS { hwDocsQamInputTSIndex, hwDocsQamInputTSIpAddressType, hwDocsQamInputTSSecondaryMulticastIpAddress, hwDocsQamInputTSSecondarySourceIpAddress, hwDocsQamInputTSSecondaryUdpPort } STATUS current DESCRIPTION "The hwDocsQamDVBSecondaryInputTSLossTrap will be sent when the secondary input TS is lost. " ::= { hwEqamAn 70 } hwDocsQamDVBSecondaryInputTSRecoveryTrap NOTIFICATION-TYPE OBJECTS { hwDocsQamInputTSIndex, hwDocsQamInputTSIpAddressType, hwDocsQamInputTSSecondaryMulticastIpAddress, hwDocsQamInputTSSecondarySourceIpAddress, hwDocsQamInputTSSecondaryUdpPort } STATUS current DESCRIPTION "The hwDocsQamDVBSecondaryInputTSRecoveryTrap will be sent when the secondary input TS recovers. " ::= { hwEqamAn 71 } hwDocsQamVODLocalIpHashConflictTrap NOTIFICATION-TYPE OBJECTS { hwFrameIndex, hwSlotIndex, hwPortIndex, hwDocsQamVideoDomainLocalIpAddressType, hwDocsQamVideoDomainLocalIpAddress } STATUS current DESCRIPTION "The hwDocsQamVODLocalIpHashConflictTrap will be sent when the local VOD IP address has a hash conflict. " ::= { hwEqamAn 72 } -- 1.3.6.1.4.1.2011.6.187.73 hwEqamLicControlObjects OBJECT IDENTIFIER ::= { hwEqamAn 73 } -- 1.3.6.1.4.1.2011.6.187.73.1 hwEqamExtendLicenseDVBPortUsed OBJECT-TYPE SYNTAX Unsigned32(0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the total number of ports used being authorized by the extended license for DVB. The default value is 0. " ::= { hwEqamLicControlObjects 1 } -- 1.3.6.1.4.1.2011.6.187.73.2 hwEqamExtendLicenseDVBPortLockFlg OBJECT-TYPE SYNTAX INTEGER { locked(1), unlocked(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether the DVB extended license is locked. Options: 1. locked(1) --License is locked 2. unlocked(2) --License is unlocked The default value is locked(1). " ::= { hwEqamLicControlObjects 2 } -- 1.3.6.1.4.1.2011.6.187.73.3 hwEqamExtendLicenseDVBPortLack OBJECT-TYPE SYNTAX Unsigned32(0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of ports to be authorized by the extended license for DVB. The default value is 0. " ::= { hwEqamLicControlObjects 3 } -- 1.3.6.1.4.1.2011.6.187.73.4 hwEqamExtendLicenseVODChannelUsed OBJECT-TYPE SYNTAX Unsigned32(0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the total number of channels used being authorized by the extended license for VOD. The default value is 0. " ::= { hwEqamLicControlObjects 4 } -- 1.3.6.1.4.1.2011.6.187.73.5 hwEqamExtendLicenseVODChannelLockFlg OBJECT-TYPE SYNTAX INTEGER { locked(1), unlocked(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether the VOD extended license is locked. Options: 1. locked(1) --License is locked 2. unlocked(2) --License is unlocked The default value is locked(1). " ::= { hwEqamLicControlObjects 5 } -- 1.3.6.1.4.1.2011.6.187.73.6 hwEqamExtendLicenseVODChannelLack OBJECT-TYPE SYNTAX Unsigned32(0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of channels to be authorized by the extended license for VOD. The default value is 0. " ::= { hwEqamLicControlObjects 6 } -- 1.3.6.1.4.1.2011.6.187.73.7 hwEqamLicenseSnmpControlValue OBJECT-TYPE SYNTAX Unsigned32(0..4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates SNMP cache for EQAM control. The default value is 0. " ::= { hwEqamLicControlObjects 7 } -- 1.3.6.1.4.1.2011.6.187.73.8 hwEqamExtendLicenseVODScrambleChannelUsed OBJECT-TYPE SYNTAX Unsigned32(0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the total number of channel being srcambled by the extended license for VOD. The default value is 0. " ::= { hwEqamLicControlObjects 8 } -- 1.3.6.1.4.1.2011.6.187.73.9 hwEqamExtendLicenseVODScrambleChannelLockFlg OBJECT-TYPE SYNTAX INTEGER { locked(1), unlocked(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether the VOD srcamble channel extended license is locked. Options: 1. locked(1) --License is locked 2. unlocked(2) --License is unlocked The default value is locked(1). " ::= { hwEqamLicControlObjects 9 } -- 1.3.6.1.4.1.2011.6.187.73.10 hwEqamExtendLicenseVODScrambleChannelLack OBJECT-TYPE SYNTAX Unsigned32(0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of channel to be srcambled by the extended license for VOD. The default value is 0. " ::= { hwEqamLicControlObjects 10 } -- 1.3.6.1.4.1.2011.6.187.74 hwDocsQamVODProcessGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDocsQamVODProcessGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the table for configuring the working board and protection board in the VOD service processing protection group, and perform switchover. The index of this table is hwDocsQamVODProcessGroupID. " ::= { hwEqamAn 74} -- 1.3.6.1.4.1.2011.6.187.74.1 hwDocsQamVODProcessGroupEntry OBJECT-TYPE SYNTAX HwDocsQamVODProcessGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the table for configuring the working board and protection board in the VOD service processing protection group, and perform switchover. The index of this entry is hwDocsQamVODProcessGroupID. " INDEX { hwDocsQamVODProcessGroupID } ::= { hwDocsQamVODProcessGroupTable 1 } HwDocsQamVODProcessGroupEntry ::= SEQUENCE { hwDocsQamVODProcessGroupID Unsigned32, hwDocsQamVODProcessGroupWorkFrameID Unsigned32, hwDocsQamVODProcessGroupWorkSlotID Unsigned32, hwDocsQamVODProcessGroupProtectFrameID Unsigned32, hwDocsQamVODProcessGroupProtectSlotID Unsigned32, hwDocsQamVODProcessGroupSwitchover INTEGER, hwDocsQamVODProcessGroupActiveFrameID Unsigned32, hwDocsQamVODProcessGroupActiveSlotID Unsigned32, hwDocsQamVODProcessGroupActive INTEGER, hwDocsQamVODProcessGroupRowStatus RowStatus } -- 1.3.6.1.4.1.2011.6.187.74.1.1 hwDocsQamVODProcessGroupID OBJECT-TYPE SYNTAX Unsigned32(1..8|4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the ID of a VOD service processing protection group. " ::= { hwDocsQamVODProcessGroupEntry 1 } -- 1.3.6.1.4.1.2011.6.187.74.1.2 hwDocsQamVODProcessGroupWorkFrameID OBJECT-TYPE SYNTAX Unsigned32(0..255|4294967295) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the ID of the frame that accomdates the working board in a VOD service processing protection group. " ::= { hwDocsQamVODProcessGroupEntry 2 } -- 1.3.6.1.4.1.2011.6.187.74.1.3 hwDocsQamVODProcessGroupWorkSlotID OBJECT-TYPE SYNTAX Unsigned32(0..255|4294967295) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the ID of the slot that accommodates the working board in a VOD service processing protection group. " ::= { hwDocsQamVODProcessGroupEntry 3 } -- 1.3.6.1.4.1.2011.6.187.74.1.4 hwDocsQamVODProcessGroupProtectFrameID OBJECT-TYPE SYNTAX Unsigned32(0..255|4294967295) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the ID of the frame that accommodates the protection board in a VOD service processing protection group. " ::= { hwDocsQamVODProcessGroupEntry 4 } -- 1.3.6.1.4.1.2011.6.187.74.1.5 hwDocsQamVODProcessGroupProtectSlotID OBJECT-TYPE SYNTAX Unsigned32(0..255|4294967295) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the ID of the slot that accommodates the protection board in a VOD service processing protection group. " ::= { hwDocsQamVODProcessGroupEntry 5 } -- 1.3.6.1.4.1.2011.6.187.74.1.6 hwDocsQamVODProcessGroupSwitchover OBJECT-TYPE SYNTAX INTEGER { switchover(1), none(255) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates switchover in a VOD service processing protection group. The default value is none(255). Options: 1. switchover(1) -Perform a switchover operation. 2. none(255) -Do not perform any operation. " ::= { hwDocsQamVODProcessGroupEntry 6 } -- 1.3.6.1.4.1.2011.6.187.74.1.7 hwDocsQamVODProcessGroupActiveFrameID OBJECT-TYPE SYNTAX Unsigned32(0..255|4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the ID of the frame that accommodates the active board in a VOD service processing protection group. " ::= { hwDocsQamVODProcessGroupEntry 7 } -- 1.3.6.1.4.1.2011.6.187.74.1.8 hwDocsQamVODProcessGroupActiveSlotID OBJECT-TYPE SYNTAX Unsigned32(0..255|4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the ID of the slot that accommodates the active board in a VOD service processing protection group. " ::= { hwDocsQamVODProcessGroupEntry 8 } -- 1.3.6.1.4.1.2011.6.187.74.1.9 hwDocsQamVODProcessGroupActive OBJECT-TYPE SYNTAX INTEGER { work(1), protect(2), none(255) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the role of the active board in a VOD service processing protection group. Options: 1. work(1) -Indicates that the working board in a VOD service processing protection group is the active board. 2. protect(2) -Indicates that the protection board in a VOD service processing protection group is the active board. 3. none(255) -Indicates that the current VOD service processing protection group does not have an active board. " ::= { hwDocsQamVODProcessGroupEntry 9 } -- 1.3.6.1.4.1.2011.6.187.74.1.255 hwDocsQamVODProcessGroupRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates a row status for querying, creating, modifying, and deleting a VOD service processing protection group table. It supports active(1), createAndGo(4), and destroy(6) operations. During query operations, the value of this leaf is always active(1). During delete operations, the value of this leaf must be set to destroy(6). During create operations, the value of this leaf must be set to createAndGo(4). This leaf is not mandatory when the table of a VOD service processing protection group needs to be modified. Options: 1. active(1) -indicates the query operation 2. createAndGo(4) -indicates the creating operation 3. destroy(6) -indicates the deleting operation " ::= { hwDocsQamVODProcessGroupEntry 255 } -- 1.3.6.1.4.1.2011.6.187.75 hwDocsQamEISProfileTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDocsQamEISProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the EQAM EIS profile table used for SCS. The index of this table is hwDocsQamEISProfileName. " ::= { hwEqamAn 75 } -- 1.3.6.1.4.1.2011.6.187.75.1 hwDocsQamEISProfileEntry OBJECT-TYPE SYNTAX HwDocsQamEISProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the EQAM EIS profile table used for SCS. The index of this entry is hwDocsQamEISProfileName. " INDEX { hwDocsQamEISProfileName } ::= { hwDocsQamEISProfileTable 1 } HwDocsQamEISProfileEntry ::= SEQUENCE { hwDocsQamEISProfileName OCTET STRING, hwDocsQamEISProfileTcpPort InetPortNumber, hwDocsQamEISProfileCPDuration Unsigned32, hwDocsQamEISProfileChannelTestInterval Unsigned32, hwDocsQamEISProfileChannelTestTimeout Unsigned32, hwDocsQamEISProfileDSCP Integer32, hwDocsQamEISProfileProtocol INTEGER, hwDocsQamEISProfileRowStatus RowStatus } -- 1.3.6.1.4.1.2011.6.187.75.1.1 hwDocsQamEISProfileName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the name of the EIS profile table. " ::= { hwDocsQamEISProfileEntry 1 } -- 1.3.6.1.4.1.2011.6.187.75.1.2 hwDocsQamEISProfileTcpPort OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the tcp port value. The default value is 0. If the node value is set to 0, the TCP port of the EIS profile will be deleted. " ::= { hwDocsQamEISProfileEntry 2 } -- 1.3.6.1.4.1.2011.6.187.75.1.3 hwDocsQamEISProfileCPDuration OBJECT-TYPE SYNTAX Unsigned32 (10..3600) UNITS "second" MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the Scrambling duration. The default value is 10. " DEFVAL { 10 } ::= { hwDocsQamEISProfileEntry 3 } -- 1.3.6.1.4.1.2011.6.187.75.1.4 hwDocsQamEISProfileChannelTestInterval OBJECT-TYPE SYNTAX Unsigned32 (10..300) UNITS "second" MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the channel test interval. The default value is 30. " DEFVAL { 30 } ::= { hwDocsQamEISProfileEntry 4 } -- 1.3.6.1.4.1.2011.6.187.75.1.5 hwDocsQamEISProfileChannelTestTimeout OBJECT-TYPE SYNTAX Unsigned32 (5..60) UNITS "second" MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the channel test timeout. The default value is 10. " DEFVAL { 10 } ::= { hwDocsQamEISProfileEntry 5 } -- 1.3.6.1.4.1.2011.6.187.75.1.6 hwDocsQamEISProfileDSCP OBJECT-TYPE SYNTAX Integer32 (0..63) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the dscp value. The default value is 0. " DEFVAL { 0 } ::= { hwDocsQamEISProfileEntry 6 } -- 1.3.6.1.4.1.2011.6.187.75.1.7 hwDocsQamEISProfileProtocol OBJECT-TYPE SYNTAX INTEGER { opencas(1), etsi(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the protocol standard for EIS. The default value is 1. Options: 1. opencas(1) - The protocol standard is OpenCAS. 2. etsi(2) - The protocol standard is ETSI. " DEFVAL { opencas } ::= { hwDocsQamEISProfileEntry 7 } -- 1.3.6.1.4.1.2011.6.187.75.1.255 hwDocsQamEISProfileRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row status, used to query, create, modify, and delete a EIS profile table. It supports the active(1), createAndGo(4), and destroy(6) operations. During query, the value of this leaf is always active(1). During deletion, specify the value of this leaf to destroy(6). During creation, specify the value of this leaf to createAndGo(4). To modify the parameters of a EIS profile table, this leaf need not be issued together. Options: 1. active(1) -indicates the query operation 2. createAndGo(4) -indicates the creating operation 3. destroy(6) -indicates the deleting operation " ::= { hwDocsQamEISProfileEntry 255 } -- 1.3.6.1.4.1.2011.6.187.76 hwDocsQamECMGTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDocsQamECMGEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the EQAM ECMG table used for SCS. The index of this table is hwDocsQamECMGName. " ::= { hwEqamAn 76 } -- 1.3.6.1.4.1.2011.6.187.76.1 hwDocsQamECMGEntry OBJECT-TYPE SYNTAX HwDocsQamECMGEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the EQAM ECMG table used for SCS. The index of this entry is hwDocsQamECMGName. " INDEX { hwDocsQamECMGName } ::= { hwDocsQamECMGTable 1 } HwDocsQamECMGEntry ::= SEQUENCE { hwDocsQamECMGName OCTET STRING, hwDocsQamECMGCASystemId Unsigned32, hwDocsQamECMGCASubSystemId Unsigned32, hwDocsQamECMGProtocolVersion INTEGER, hwDocsQamECMGChannelSetupTimeout Unsigned32, hwDocsQamECMGChannelTestInterval Unsigned32, hwDocsQamECMGChannelTestTimeout Unsigned32, hwDocsQamECMGDSCP Integer32, hwDocsQamECMGRowStatus RowStatus } -- 1.3.6.1.4.1.2011.6.187.76.1.1 hwDocsQamECMGName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the name of the ECMG table. " ::= { hwDocsQamECMGEntry 1 } -- 1.3.6.1.4.1.2011.6.187.76.1.2 hwDocsQamECMGCASystemId OBJECT-TYPE SYNTAX Unsigned32 (0..65535 | 4294967295) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the super conditional access system ID. The default value is 4294967295. " DEFVAL { 4294967295 } ::= { hwDocsQamECMGEntry 2 } -- 1.3.6.1.4.1.2011.6.187.76.1.3 hwDocsQamECMGCASubSystemId OBJECT-TYPE SYNTAX Unsigned32 (0..65535 | 4294967295) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the super conditional access subsystem ID. The default value is 4294967295. If both hwDocsQamECMGCASystemId and hwDocsQamECMGCASubSystemId are set to 4294967295, the super conditional access system ID will be deleted. " DEFVAL { 4294967295 } ::= { hwDocsQamECMGEntry 3 } -- 1.3.6.1.4.1.2011.6.187.76.1.4 hwDocsQamECMGProtocolVersion OBJECT-TYPE SYNTAX INTEGER { ver2(1), ver3(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the protocol version. The default value is ver2. Options: 1. ver2(1) - The protocol version is ver2. 2. ver3(2) - The protocol version is ver3. " DEFVAL { ver2 } ::= { hwDocsQamECMGEntry 4 } -- 1.3.6.1.4.1.2011.6.187.76.1.5 hwDocsQamECMGChannelSetupTimeout OBJECT-TYPE SYNTAX Unsigned32 (5..60) UNITS "second" MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the channel test setup timeout. The default value is 10. " DEFVAL { 10 } ::= { hwDocsQamECMGEntry 5 } -- 1.3.6.1.4.1.2011.6.187.76.1.6 hwDocsQamECMGChannelTestInterval OBJECT-TYPE SYNTAX Unsigned32 (10..300) UNITS "second" MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the channel test interval. The default value is 30. " DEFVAL { 30 } ::= { hwDocsQamECMGEntry 6 } -- 1.3.6.1.4.1.2011.6.187.76.1.7 hwDocsQamECMGChannelTestTimeout OBJECT-TYPE SYNTAX Unsigned32 (5..60) UNITS "second" MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the channel test timeout. The default value is 10. " DEFVAL { 10 } ::= { hwDocsQamECMGEntry 7 } -- 1.3.6.1.4.1.2011.6.187.76.1.8 hwDocsQamECMGDSCP OBJECT-TYPE SYNTAX Integer32 (0..63) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the ECMG dscp value. The default value is 0. " DEFVAL { 0 } ::= { hwDocsQamECMGEntry 8 } -- 1.3.6.1.4.1.2011.6.187.76.1.255 hwDocsQamECMGRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row status, used to query, create, modify, and delete a ECMG table. It supports the active(1), createAndGo(4), and destroy(6) operations. During query, the value of this leaf is always active(1). During deletion, specify the value of this leaf to destroy(6). During creation, specify the value of this leaf to createAndGo(4). To modify the parameters of a ECMG table, this leaf need not be issued together. Options: 1. active(1) -indicates the query operation 2. createAndGo(4) -indicates the creating operation 3. destroy(6) -indicates the deleting operation " ::= { hwDocsQamECMGEntry 255 } -- 1.3.6.1.4.1.2011.6.187.77 hwDocsQamECMGChannelTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDocsQamECMGChannelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the EQAM ECMG Channel table. The index of this table is hwDocsQamECMGName and hwDocsQamECMGChannelID. " ::= { hwEqamAn 77 } -- 1.3.6.1.4.1.2011.6.187.77.1 hwDocsQamECMGChannelEntry OBJECT-TYPE SYNTAX HwDocsQamECMGChannelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the EQAM ECMG Channel table. The index of this entry is hwDocsQamECMGName and hwDocsQamECMGChannelID. " INDEX { hwDocsQamECMGName, hwDocsQamECMGChannelID } ::= { hwDocsQamECMGChannelTable 1 } HwDocsQamECMGChannelEntry ::= SEQUENCE { hwDocsQamECMGChannelID Unsigned32, hwDocsQamECMGChannelIpAddressType InetAddressType, hwDocsQamECMGChannelIpAddress InetAddress, hwDocsQamECMGTcpPort InetPortNumber, hwDocsQamECMGChannelPriority Unsigned32, hwDocsQamECMGChannelRowStatus RowStatus } -- 1.3.6.1.4.1.2011.6.187.77.1.1 hwDocsQamECMGChannelID OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the ECMG Channel ID. " ::= { hwDocsQamECMGChannelEntry 1 } -- 1.3.6.1.4.1.2011.6.187.77.1.2 hwDocsQamECMGChannelIpAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the ECMG channel ip address type. The default value is ipv4. " ::= { hwDocsQamECMGChannelEntry 2 } -- 1.3.6.1.4.1.2011.6.187.77.1.3 hwDocsQamECMGChannelIpAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the ECMG channel IpAddress. The default value is 0.0.0.0 . " DEFVAL { 0 } ::= { hwDocsQamECMGChannelEntry 3 } -- 1.3.6.1.4.1.2011.6.187.77.1.4 hwDocsQamECMGTcpPort OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the ECMG tcp port. The default value is 0. If the value is set to 0, the ECMG TCP port will be deleted. " ::= { hwDocsQamECMGChannelEntry 4 } -- 1.3.6.1.4.1.2011.6.187.77.1.5 hwDocsQamECMGChannelPriority OBJECT-TYPE SYNTAX Unsigned32 (0..127) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the ECMG channel priority . The default value is 0. " DEFVAL { 0 } ::= { hwDocsQamECMGChannelEntry 5 } -- 1.3.6.1.4.1.2011.6.187.77.1.255 hwDocsQamECMGChannelRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row status, used to query, create, modify, and delete a ECMG channel table. It supports the active(1), createAndGo(4), and destroy(6) operations. During query, the value of this leaf is always active(1). During deletion, specify the value of this leaf to destroy(6). During creation, specify the value of this leaf to createAndGo(4). To modify the parameters of a ECMG channel table, this leaf need not be issued together. Options: 1. active(1) -indicates the query operation 2. createAndGo(4) -indicates the creating operation 3. destroy(6) -indicates the deleting operation " ::= { hwDocsQamECMGChannelEntry 255 } -- 1.3.6.1.4.1.2011.6.187.78 hwDocsQamSCSTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDocsQamSCSEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the EQAM SCS table. The index of this table is hwDocsQamSCSName. " ::= { hwEqamAn 78 } -- 1.3.6.1.4.1.2011.6.187.78.1 hwDocsQamSCSEntry OBJECT-TYPE SYNTAX HwDocsQamSCSEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the EQAM SCS table. The index of this entry is hwDocsQamSCSName. " INDEX { hwDocsQamSCSName } ::= { hwDocsQamSCSTable 1 } HwDocsQamSCSEntry ::= SEQUENCE { hwDocsQamSCSName OCTET STRING, hwDocsQamSCSScramblingAlgorithm INTEGER, hwDocsQamSCSEISProfileName OCTET STRING, hwDocsQamSCSEISSourceInterfaceType INTEGER, hwDocsQamSCSEISSourceInterfaceNumber Unsigned32, hwDocsQamSCSRowStatus RowStatus } -- 1.3.6.1.4.1.2011.6.187.78.1.1 hwDocsQamSCSName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the name of the SCS table. " ::= { hwDocsQamSCSEntry 1 } -- 1.3.6.1.4.1.2011.6.187.78.1.2 hwDocsQamSCSScramblingAlgorithm OBJECT-TYPE SYNTAX INTEGER { csav1(1), csav2(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the super conditional access system ID. The default value is csav2. Options: 1. csav1(1) - The protocol version is ver2. 2. csav2(2) - The protocol version is ver3. " DEFVAL { csav2 } ::= { hwDocsQamSCSEntry 2 } -- 1.3.6.1.4.1.2011.6.187.78.1.3 hwDocsQamSCSEISProfileName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..31)) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the name of the EIS profile table. If the node value is set to a null string, the bound EIS profile will be deleted. " ::= { hwDocsQamSCSEntry 3 } -- 1.3.6.1.4.1.2011.6.187.78.1.4 hwDocsQamSCSEISSourceInterfaceType OBJECT-TYPE SYNTAX INTEGER { loopback(1), vlanif(2), invalid(255) } MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the EIS source interface type. The default value is invalid. Options: 1. loopback(1) - The EIS source interface type is loopback. 2. vlanif(2) - The EIS source interface type is vlanif. 3. invalid(255) - The EIS source interface type is not configured. " DEFVAL { invalid } ::= { hwDocsQamSCSEntry 4 } -- 1.3.6.1.4.1.2011.6.187.78.1.5 hwDocsQamSCSEISSourceInterfaceNumber OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the EIS source interface number. The default value is 4294967295. " DEFVAL { 4294967295 } ::= { hwDocsQamSCSEntry 5 } -- 1.3.6.1.4.1.2011.6.187.78.1.255 hwDocsQamSCSRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row status, used to query, create, modify, and delete a SCS table. It supports the active(1), createAndGo(4), and destroy(6) operations. During query, the value of this leaf is always active(1). During deletion, specify the value of this leaf to destroy(6). During creation, specify the value of this leaf to createAndGo(4). To modify the parameters of a SCS table, this leaf need not be issued together. Options: 1. active(1) -indicates the query operation 2. createAndGo(4) -indicates the creating operation 3. destroy(6) -indicates the deleting operation " ::= { hwDocsQamSCSEntry 255 } -- 1.3.6.1.4.1.2011.6.187.79 hwDocsQamSCSECMGTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDocsQamSCSECMGEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the EQAM SCSECMG table. The index of this table is hwDocsQamSCSName and hwDocsQamECMGName. " ::= { hwEqamAn 79 } -- 1.3.6.1.4.1.2011.6.187.79.1 hwDocsQamSCSECMGEntry OBJECT-TYPE SYNTAX HwDocsQamSCSECMGEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the EQAM SCSECMG table. The index of this entry is hwDocsQamSCSName and hwDocsQamECMGName. " INDEX { hwDocsQamSCSName, hwDocsQamECMGName } ::= { hwDocsQamSCSECMGTable 1 } HwDocsQamSCSECMGEntry ::= SEQUENCE { hwDocsQamSCSECMGSourceInterfaceType INTEGER, hwDocsQamSCSECMGSourceInterfaceNumber Unsigned32, hwDocsQamSCSECMGRowStatus RowStatus } -- 1.3.6.1.4.1.2011.6.187.79.1.1 hwDocsQamSCSECMGSourceInterfaceType OBJECT-TYPE SYNTAX INTEGER { loopback(1), vlanif(2), invalid(255) } MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the ECMG source interface type. The default value is invalid. Options: 1. loopback(1) - The ECMG source interface type is loopback. 2. vlanif(2) - The ECMG source interface type is vlanif. 3. invalid(255) - The ECMG source interface type is not configured. " DEFVAL { invalid } ::= { hwDocsQamSCSECMGEntry 1 } -- 1.3.6.1.4.1.2011.6.187.79.1.2 hwDocsQamSCSECMGSourceInterfaceNumber OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the ECMG source interface number. The default value is 4294967295. " DEFVAL { 4294967295 } ::= { hwDocsQamSCSECMGEntry 2 } -- 1.3.6.1.4.1.2011.6.187.79.1.255 hwDocsQamSCSECMGRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row status, used to query, create, modify, and delete a SCSECMG table. It supports the active(1), createAndGo(4), and destroy(6) operations. During query, the value of this leaf is always active(1). During deletion, specify the value of this leaf to destroy(6). During creation, specify the value of this leaf to createAndGo(4). To modify the parameters of a SCSECMG table, this leaf need not be issued together. Options: 1. active(1) -indicates the query operation 2. createAndGo(4) -indicates the creating operation 3. destroy(6) -indicates the deleting operation " ::= { hwDocsQamSCSECMGEntry 255 } -- 1.3.6.1.4.1.2011.6.187.80 hwDocsQamScsEisScgTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDocsQamScsEisScgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the EQAM SCG table used for SCS and EIS. The index of this table is hwDocsQamSCSName and hwDocsQamScsEisScgID. " ::= { hwEqamAn 80 } -- 1.3.6.1.4.1.2011.6.187.80.1 hwDocsQamScsEisScgEntry OBJECT-TYPE SYNTAX HwDocsQamScsEisScgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the EQAM SCG table used for SCS and EIS. The index of this entry is hwDocsQamSCSName and hwDocsQamScsEisScgID. " INDEX { hwDocsQamSCSName, hwDocsQamScsEisScgID } ::= { hwDocsQamScsEisScgTable 1 } HwDocsQamScsEisScgEntry ::= SEQUENCE { hwDocsQamScsEisScgID Unsigned32, hwDocsQamScsEisScgTransportStreamID Unsigned32, hwDocsQamScsEisScgOriginalNetworkID Unsigned32, hwDocsQamScsEisScgReferenceID Unsigned32, hwDocsQamScsEisScgActivationTime DateAndTime, hwDocsQamScsEisScgRecommendedCPDuration Unsigned32, hwDocsQamScsEisScgServiceList OCTET STRING } -- 1.3.6.1.4.1.2011.6.187.80.1.1 hwDocsQamScsEisScgID OBJECT-TYPE SYNTAX Unsigned32(0..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the index of a SCG mapping table. " ::= { hwDocsQamScsEisScgEntry 1 } -- 1.3.6.1.4.1.2011.6.187.80.1.2 hwDocsQamScsEisScgTransportStreamID OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the Transport stream ID of SCG. The default value is 4294967295. " DEFVAL { 4294967295 } ::= { hwDocsQamScsEisScgEntry 2 } -- 1.3.6.1.4.1.2011.6.187.80.1.3 hwDocsQamScsEisScgOriginalNetworkID OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the original network ID of SCG. The default value is 4294967295. If the queried node value is 4294967295, the server has not issued a valid original network ID of the SCG. " DEFVAL { 4294967295 } ::= { hwDocsQamScsEisScgEntry 3 } -- 1.3.6.1.4.1.2011.6.187.80.1.4 hwDocsQamScsEisScgReferenceID OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the reference ID of SCG. The default value is 4294967295. If the queried node value is 4294967295, the server has not issued a valid reference ID of the SCG. " DEFVAL { 4294967295 } ::= { hwDocsQamScsEisScgEntry 4 } -- 1.3.6.1.4.1.2011.6.187.80.1.5 hwDocsQamScsEisScgActivationTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the time on which SCG actived. The default value is 1900-01-01 00:00:00, which indicates that the SCG issued by the EIS takes effect immediately. " ::= { hwDocsQamScsEisScgEntry 5 } -- 1.3.6.1.4.1.2011.6.187.80.1.6 hwDocsQamScsEisScgRecommendedCPDuration OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) UNITS "milli-seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the cp duration of SCG. The default value is 4294967295 ms. If the queried node value is 4294967295, the server has not issued a valid CP duration of the SCG. " DEFVAL { 4294967295 } ::= { hwDocsQamScsEisScgEntry 6 } -- 1.3.6.1.4.1.2011.6.187.80.1.7 hwDocsQamScsEisScgServiceList OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the service list of SCG. The default value is 0. " ::= { hwDocsQamScsEisScgEntry 7 } -- 1.3.6.1.4.1.2011.6.187.81 hwDocsQamScsEisTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDocsQamScsEisEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the EQAM EIS table used for SCS. The index of this table is hwDocsQamSCSName and hwDocsQamScsEisChannelID. " ::= { hwEqamAn 81 } -- 1.3.6.1.4.1.2011.6.187.81.1 hwDocsQamScsEisEntry OBJECT-TYPE SYNTAX HwDocsQamScsEisEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the EQAM EIS table used for SCS. The index of this entry is hwDocsQamSCSName and hwDocsQamScsEisChannelID. " INDEX { hwDocsQamSCSName, hwDocsQamScsEisChannelID } ::= { hwDocsQamScsEisTable 1 } HwDocsQamScsEisEntry ::= SEQUENCE { hwDocsQamScsEisChannelID Unsigned32, hwDocsQamScsEisIpAddressType InetAddressType, hwDocsQamScsEisPeerIpAddress InetAddress, hwDocsQamScsEisPeerTcpPort InetPortNumber, hwDocsQamScsEisLocalIpAddress InetAddress, hwDocsQamScsEisLocalTcpPort InetPortNumber, hwDocsQamScsEisState INTEGER, hwDocsQamScsEisProtocolVersion INTEGER, hwDocsQamScsEisServiceFlag TruthValue, hwDocsQamScsEisComponentFlag TruthValue, hwDocsQamScsEisMaxSCG Unsigned32, hwDocsQamScsEisCPDurationFlag TruthValue, hwDocsQamScsEisErroStatusCode Unsigned32, hwDocsQamScsEisStatisticsReset INTEGER, hwDocsQamScsEisStatisticsReceivedTotalMessages Counter64, hwDocsQamScsEisStatisticsReceivedChannelSetupMessages Counter64, hwDocsQamScsEisStatisticsReceivedChannelTestMessages Counter64, hwDocsQamScsEisStatisticsReceivedChannelStatusMessages Counter64, hwDocsQamScsEisStatisticsReceivedChannelCloseMessages Counter64, hwDocsQamScsEisStatisticsReceivedChannelResetMessages Counter64, hwDocsQamScsEisStatisticsReceivedChannelErrorMessages Counter64, hwDocsQamScsEisStatisticsReceivedSCGProvisionMessages Counter64, hwDocsQamScsEisStatisticsReceivedSCGTestMessages Counter64, hwDocsQamScsEisStatisticsReceivedSCGListRequestMessages Counter64, hwDocsQamScsEisStatisticsSentTotalMessages Counter64, hwDocsQamScsEisStatisticsSentChannelTestMessages Counter64, hwDocsQamScsEisStatisticsSentChannelStatusMessages Counter64, hwDocsQamScsEisStatisticsSentChannelErrorMessages Counter64, hwDocsQamScsEisStatisticsSentSCGStatusMessages Counter64, hwDocsQamScsEisStatisticsSentSCGListResponseMessages Counter64, hwDocsQamScsEisStatisticsSentSCGErrorMessages Counter64, hwDocsQamScsEisNominalCPDuration Unsigned32, hwDocsQamScsEisMinAcDelayStart Integer32, hwDocsQamScsEisCpDurationConfigMode Unsigned32 } -- 1.3.6.1.4.1.2011.6.187.81.1.1 hwDocsQamScsEisChannelID OBJECT-TYPE SYNTAX Unsigned32(0..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the channel ID for EIS. " ::= { hwDocsQamScsEisEntry 1 } -- 1.3.6.1.4.1.2011.6.187.81.1.2 hwDocsQamScsEisIpAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute identifies the IP address type of the EIS. The default value is ipv4. " ::= { hwDocsQamScsEisEntry 2 } -- 1.3.6.1.4.1.2011.6.187.81.1.3 hwDocsQamScsEisPeerIpAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute identifies the peer IP address of the EIS. The default value is 0.0.0.0. " ::= { hwDocsQamScsEisEntry 3 } -- 1.3.6.1.4.1.2011.6.187.81.1.4 hwDocsQamScsEisPeerTcpPort OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the peer tcp port of EIS. The default value is 0. " DEFVAL { 0 } ::= { hwDocsQamScsEisEntry 4 } -- 1.3.6.1.4.1.2011.6.187.81.1.5 hwDocsQamScsEisLocalIpAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute identifies the IP address type of the SCS EIS local. " ::= { hwDocsQamScsEisEntry 5 } -- 1.3.6.1.4.1.2011.6.187.81.1.6 hwDocsQamScsEisLocalTcpPort OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the local tcpport of EIS. The default value is 0. " DEFVAL { 0 } ::= { hwDocsQamScsEisEntry 6 } -- 1.3.6.1.4.1.2011.6.187.81.1.7 hwDocsQamScsEisState OBJECT-TYPE SYNTAX INTEGER { listening(1), tcpestablished(2), notopen(3), settingup(4), open(5), error(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the status of EIS. The default value is listening(1). Options: 1. listening(1) --listening state 2. tcpestablished(2) --tcpestablished state 3. notopen(3) --notopen state 4. settingup(4) --settingup state 5. open(5) --open state 6. error(6) --error state " ::= { hwDocsQamScsEisEntry 7 } -- 1.3.6.1.4.1.2011.6.187.81.1.8 hwDocsQamScsEisProtocolVersion OBJECT-TYPE SYNTAX INTEGER { ver3(1), ver4(2), ver2(3), invalid(255) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the protocol version. Options: 1. ver3(1) --version 3 2. ver4(2) --version 4 3. ver2(3) --version 2 4. invalid(255) --version invalid " ::= { hwDocsQamScsEisEntry 8 } -- 1.3.6.1.4.1.2011.6.187.81.1.9 hwDocsQamScsEisServiceFlag OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the service flag of EIS.The default value is true(1). " ::= { hwDocsQamScsEisEntry 9 } -- 1.3.6.1.4.1.2011.6.187.81.1.10 hwDocsQamScsEisComponentFlag OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the component flag of EIS.The default value is false(2). " ::= { hwDocsQamScsEisEntry 10 } -- 1.3.6.1.4.1.2011.6.187.81.1.11 hwDocsQamScsEisMaxSCG OBJECT-TYPE SYNTAX Unsigned32(0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the max count of SCG. The default value is 7500. " DEFVAL { 7500 } ::= { hwDocsQamScsEisEntry 11 } -- 1.3.6.1.4.1.2011.6.187.81.1.12 hwDocsQamScsEisCPDurationFlag OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the CP duration flag. The default value is true(1). " ::= { hwDocsQamScsEisEntry 12 } -- 1.3.6.1.4.1.2011.6.187.81.1.13 hwDocsQamScsEisErroStatusCode OBJECT-TYPE SYNTAX Unsigned32(0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the error status code of EIS,please read 'ETSI TS 103 197 V1.5.1,chapter 10.7 Error status' for reference. The default value is 0. " DEFVAL { 0 } ::= { hwDocsQamScsEisEntry 13 } -- 1.3.6.1.4.1.2011.6.187.81.1.14 hwDocsQamScsEisStatisticsReset OBJECT-TYPE SYNTAX INTEGER { clear(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the reset process of EIS. The default value is clear(1). Options: 1. clear(1) --clear info " ::= { hwDocsQamScsEisEntry 14 } -- 1.3.6.1.4.1.2011.6.187.81.1.15 hwDocsQamScsEisStatisticsReceivedTotalMessages OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of received total messages. The default value is 0. " ::= { hwDocsQamScsEisEntry 15 } -- 1.3.6.1.4.1.2011.6.187.81.1.16 hwDocsQamScsEisStatisticsReceivedChannelSetupMessages OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of received channel setup messages. The default value is 0. " ::= { hwDocsQamScsEisEntry 16 } -- 1.3.6.1.4.1.2011.6.187.81.1.17 hwDocsQamScsEisStatisticsReceivedChannelTestMessages OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of received channel test messages. The default value is 0. " ::= { hwDocsQamScsEisEntry 17 } -- 1.3.6.1.4.1.2011.6.187.81.1.18 hwDocsQamScsEisStatisticsReceivedChannelStatusMessages OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of received channel status messages. The default value is 0. " ::= { hwDocsQamScsEisEntry 18 } -- 1.3.6.1.4.1.2011.6.187.81.1.19 hwDocsQamScsEisStatisticsReceivedChannelCloseMessages OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of received channel close messages. The default value is 0. " ::= { hwDocsQamScsEisEntry 19 } -- 1.3.6.1.4.1.2011.6.187.81.1.20 hwDocsQamScsEisStatisticsReceivedChannelResetMessages OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of received channel reset messages. The default value is 0. " ::= { hwDocsQamScsEisEntry 20 } -- 1.3.6.1.4.1.2011.6.187.81.1.21 hwDocsQamScsEisStatisticsReceivedChannelErrorMessages OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of received channel error messages. The default value is 0. " ::= { hwDocsQamScsEisEntry 21 } -- 1.3.6.1.4.1.2011.6.187.81.1.22 hwDocsQamScsEisStatisticsReceivedSCGProvisionMessages OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of received SCG provision messages. The default value is 0. " ::= { hwDocsQamScsEisEntry 22 } -- 1.3.6.1.4.1.2011.6.187.81.1.23 hwDocsQamScsEisStatisticsReceivedSCGTestMessages OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of received SCG test messages. The default value is 0. " ::= { hwDocsQamScsEisEntry 23 } -- 1.3.6.1.4.1.2011.6.187.81.1.24 hwDocsQamScsEisStatisticsReceivedSCGListRequestMessages OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of received SCG list request messages. The default value is 0. " ::= { hwDocsQamScsEisEntry 24 } -- 1.3.6.1.4.1.2011.6.187.81.1.25 hwDocsQamScsEisStatisticsSentTotalMessages OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of sent total messages. The default value is 0. " ::= { hwDocsQamScsEisEntry 25 } -- 1.3.6.1.4.1.2011.6.187.81.1.26 hwDocsQamScsEisStatisticsSentChannelTestMessages OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of sent channel test messages. The default value is 0. " ::= { hwDocsQamScsEisEntry 26 } -- 1.3.6.1.4.1.2011.6.187.81.1.27 hwDocsQamScsEisStatisticsSentChannelStatusMessages OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of sent channel status messages. The default value is 0. " ::= { hwDocsQamScsEisEntry 27 } -- 1.3.6.1.4.1.2011.6.187.81.1.28 hwDocsQamScsEisStatisticsSentChannelErrorMessages OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of sent channel error messages. The default value is 0. " ::= { hwDocsQamScsEisEntry 28 } -- 1.3.6.1.4.1.2011.6.187.81.1.29 hwDocsQamScsEisStatisticsSentSCGStatusMessages OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of sent SCG status messages. The default value is 0. " ::= { hwDocsQamScsEisEntry 29 } -- 1.3.6.1.4.1.2011.6.187.81.1.30 hwDocsQamScsEisStatisticsSentSCGListResponseMessages OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of sent SCG list response messages. The default value is 0. " ::= { hwDocsQamScsEisEntry 30 } -- 1.3.6.1.4.1.2011.6.187.81.1.31 hwDocsQamScsEisStatisticsSentSCGErrorMessages OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of sent SCG error messages. The default value is 0. " ::= { hwDocsQamScsEisEntry 31 } -- 1.3.6.1.4.1.2011.6.187.81.1.32 hwDocsQamScsEisNominalCPDuration OBJECT-TYPE SYNTAX Unsigned32(0..4294967295) UNITS "millisecond" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the nominal CP duration of EIS. This node is only valid under the OpenCAS protocol standard. The default value is 4294967295. If the current protocol is the OpenCAS protocol standard and the queried node value is 4294967295, the EIS server has not issued a valid CP duration of the SCG. If the current protocol is the ETSI protocol standard, the queried node is invalid and the value is 4294967295. " DEFVAL { 4294967295 } ::= { hwDocsQamScsEisEntry 32 } -- 1.3.6.1.4.1.2011.6.187.81.1.33 hwDocsQamScsEisMinAcDelayStart OBJECT-TYPE SYNTAX Integer32(-32768..32767) UNITS "millisecond" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the minimum ac delay start time of EIS. This node is only valid under the OpenCAS protocol standard. The default value is 0. If the current protocol is the OpenCAS protocol standard and the queried node value is 0, the minimum ac delay start time of EIS is 0. If the current protocol is the ETSI protocol standard, the queried node is invalid and the value is 0. " DEFVAL { 0 } ::= { hwDocsQamScsEisEntry 33 } -- 1.3.6.1.4.1.2011.6.187.81.1.34 hwDocsQamScsEisCpDurationConfigMode OBJECT-TYPE SYNTAX Unsigned32(0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the CP duration configuration mode of the EIS. This node is only valid under the OpenCAS protocol standard. The default value is 0. If the current protocol is the OpenCAS protocol standard and the queried node value is 0, the CP duration configuration is not supported. If the current protocol is the ETSI protocol standard, the queried node is invalid and the value is 0. " DEFVAL { 0 } ::= { hwDocsQamScsEisEntry 34 } -- 1.3.6.1.4.1.2011.6.187.82 hwDocsQamScsEisScgEcmTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDocsQamScsEisScgEcmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the EQAM scs eis scg ecm table used. The index of this table is hwDocsQamSCSName, hwDocsQamScsEisScgID and hwDocsQamScsEisScgEcmGroupIndex. " ::= { hwEqamAn 82 } -- 1.3.6.1.4.1.2011.6.187.82.1 hwDocsQamScsEisScgEcmEntry OBJECT-TYPE SYNTAX HwDocsQamScsEisScgEcmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the EQAM scs eis scg ecm table used. The index of this entry is hwDocsQamSCSName, hwDocsQamScsEisScgID and hwDocsQamScsEisScgEcmGroupIndex. " INDEX { hwDocsQamSCSName, hwDocsQamScsEisScgID, hwDocsQamScsEisScgEcmGroupIndex } ::= { hwDocsQamScsEisScgEcmTable 1 } HwDocsQamScsEisScgEcmEntry ::= SEQUENCE { hwDocsQamScsEisScgEcmGroupIndex Unsigned32, hwDocsQamScsEisScgEcmSuperCasID Unsigned32, hwDocsQamScsEisScgEcmID Unsigned32, hwDocsQamScsEisScgEcmAccessCriteria OCTET STRING, hwDocsQamScsEisScgEcmACTransferMode Unsigned32 } -- 1.3.6.1.4.1.2011.6.187.82.1.1 hwDocsQamScsEisScgEcmGroupIndex OBJECT-TYPE SYNTAX Unsigned32(0..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the index of a ECM group table. " ::= { hwDocsQamScsEisScgEcmEntry 1 } -- 1.3.6.1.4.1.2011.6.187.82.1.2 hwDocsQamScsEisScgEcmSuperCasID OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the super CAS ID. The default value is 0. " DEFVAL { 0 } ::= { hwDocsQamScsEisScgEcmEntry 2 } -- 1.3.6.1.4.1.2011.6.187.82.1.3 hwDocsQamScsEisScgEcmID OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the ECM ID. The default value is 0. " DEFVAL { 0 } ::= { hwDocsQamScsEisScgEcmEntry 3 } -- 1.3.6.1.4.1.2011.6.187.82.1.4 hwDocsQamScsEisScgEcmAccessCriteria OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..127)) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the access criteria. The default value is 0. " ::= { hwDocsQamScsEisScgEcmEntry 4 } -- 1.3.6.1.4.1.2011.6.187.82.1.5 hwDocsQamScsEisScgEcmACTransferMode OBJECT-TYPE SYNTAX Unsigned32 (0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the AC transfer mode. The default value is 0. If it equals 0, it indicates that the access_criteria parameter is required in the CW_provision message only when the contents of this parameter change. If it equals 1, it indicates that the ECMG requires the access_criteria parameter be present in each CW_provision message. " DEFVAL { 0 } ::= { hwDocsQamScsEisScgEcmEntry 5 } -- 1.3.6.1.4.1.2011.6.187.83 hwDocsQamScsEcmgInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDocsQamScsEcmgInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the EQAM SCS ECMG Info table. The index of this table is hwDocsQamSCSName and hwDocsQamScsEcmgChannelID. " ::= { hwEqamAn 83 } -- 1.3.6.1.4.1.2011.6.187.83.1 hwDocsQamScsEcmgInfoEntry OBJECT-TYPE SYNTAX HwDocsQamScsEcmgInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the EQAM SCS ECMG Info table. The index of this entry is hwDocsQamSCSName and hwDocsQamScsEcmgChannelID. " INDEX { hwDocsQamSCSName, hwDocsQamScsEcmgChannelID } ::= { hwDocsQamScsEcmgInfoTable 1 } HwDocsQamScsEcmgInfoEntry ::= SEQUENCE { hwDocsQamScsEcmgChannelID Unsigned32, hwDocsQamScsEcmgInfoName OCTET STRING, hwDocsQamScsEcmgIpAddressType InetAddressType, hwDocsQamScsEcmgPeerIpAddress InetAddress, hwDocsQamScsEcmgPeerTcpPort InetPortNumber, hwDocsQamScsEcmgLocalIpAddress InetAddress, hwDocsQamScsEcmgLocalTcpPort InetPortNumber, hwDocsQamScsEcmgState INTEGER, hwDocsQamScsEcmgProtocolVersion INTEGER, hwDocsQamScsEcmgSuperCasId Unsigned32, hwDocsQamScsEcmgSectionTsPacketFlag Unsigned32, hwDocsQamScsEcmgACDelayStart Integer32, hwDocsQamScsEcmgACDelayStop Integer32, hwDocsQamScsEcmgDelayStart Integer32, hwDocsQamScsEcmgDelayStop Integer32, hwDocsQamScsEcmgTransitionDelayStart Integer32, hwDocsQamScsEcmgTransitionDelayStop Integer32, hwDocsQamScsEcmgECMRepetitionPeriod Unsigned32, hwDocsQamScsEcmgMaxStreams Unsigned32, hwDocsQamScsEcmgMinCPDuration Unsigned32, hwDocsQamScsEcmgLeadCW Unsigned32, hwDocsQamScsEcmgCWperMsg Unsigned32, hwDocsQamScsEcmgMaxComputeTime Unsigned32, hwDocsQamScsEcmgErroStatusCode Unsigned32, hwDocsQamScsEcmgStatisticsReset INTEGER, hwDocsQamScsEcmgStatisticsReceivedTotalMessages Counter64, hwDocsQamScsEcmgStatisticsReceivedChannelTestMessages Counter64, hwDocsQamScsEcmgStatisticsReceivedChannelStatusMessages Counter64, hwDocsQamScsEcmgStatisticsReceivedChannelErrorMessages Counter64, hwDocsQamScsEcmgStatisticsReceivedStreamTestMessages Counter64, hwDocsQamScsEcmgStatisticsReceivedStreamStatusMessages Counter64, hwDocsQamScsEcmgStatisticsReceivedStreamCloseResponseMessages Counter64, hwDocsQamScsEcmgStatisticsReceivedStreamErrorMessages Counter64, hwDocsQamScsEcmgStatisticsReceivedECMResponseMessages Counter64, hwDocsQamScsEcmgStatisticsSentTotalMessages Counter64, hwDocsQamScsEcmgStatisticsSentChannelSetupMessages Counter64, hwDocsQamScsEcmgStatisticsSentChannelTestMessages Counter64, hwDocsQamScsEcmgStatisticsSentChannelStatusMessages Counter64, hwDocsQamScsEcmgStatisticsSentChannelCloseMessages Counter64, hwDocsQamScsEcmgStatisticsSentChannelErrorMessages Counter64, hwDocsQamScsEcmgStatisticsSentStreamSetupMessages Counter64, hwDocsQamScsEcmgStatisticsSentStreamTestMessages Counter64, hwDocsQamScsEcmgStatisticsSentStreamStatusMessages Counter64, hwDocsQamScsEcmgStatisticsSentStreamCloseRequestMessages Counter64, hwDocsQamScsEcmgStatisticsSentStreamErrorMessages Counter64, hwDocsQamScsEcmgStatisticsSentCWProvisionMessages Counter64 } -- 1.3.6.1.4.1.2011.6.187.83.1.1 hwDocsQamScsEcmgChannelID OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the ECMG Channel ID. " ::= { hwDocsQamScsEcmgInfoEntry 1 } -- 1.3.6.1.4.1.2011.6.187.83.1.2 hwDocsQamScsEcmgInfoName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..31)) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the ECMG name. The default value is null string. " ::= { hwDocsQamScsEcmgInfoEntry 2 } -- 1.3.6.1.4.1.2011.6.187.83.1.3 hwDocsQamScsEcmgIpAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the ip address type of ECMG session. The default value is ipv4. " ::= { hwDocsQamScsEcmgInfoEntry 3 } -- 1.3.6.1.4.1.2011.6.187.83.1.4 hwDocsQamScsEcmgPeerIpAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the peer IpAddress of ECMG session. The default value is 0.0.0.0 . " DEFVAL { 0 } ::= { hwDocsQamScsEcmgInfoEntry 4 } -- 1.3.6.1.4.1.2011.6.187.83.1.5 hwDocsQamScsEcmgPeerTcpPort OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the peer tcp port of ECMG session. The default value is 0. " DEFVAL { 0 } ::= { hwDocsQamScsEcmgInfoEntry 5 } -- 1.3.6.1.4.1.2011.6.187.83.1.6 hwDocsQamScsEcmgLocalIpAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the local IpAddress of ECMG session. The default value is 0.0.0.0 . " DEFVAL { 0 } ::= { hwDocsQamScsEcmgInfoEntry 6 } -- 1.3.6.1.4.1.2011.6.187.83.1.7 hwDocsQamScsEcmgLocalTcpPort OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the local tcp port of ECMG session. The default value is 0. " DEFVAL { 0 } ::= { hwDocsQamScsEcmgInfoEntry 7 } -- 1.3.6.1.4.1.2011.6.187.83.1.8 hwDocsQamScsEcmgState OBJECT-TYPE SYNTAX INTEGER { connecting(1), connected(2), notopen(3), settingup(4), open(5), error(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the state of ECMG session. The default value is connecting. Options: 1. connecting(1) - The ECMG is connecting. 2. connected(2) - The ECMG is connected. 3. notopen(3) - The ECMG is not open. 4. settingup(4) - The ECMG is setting up. 5. open(5) - The ECMG is open. 6. error(6) - The ECMG is error. " DEFVAL { connecting } ::= { hwDocsQamScsEcmgInfoEntry 8 } -- 1.3.6.1.4.1.2011.6.187.83.1.9 hwDocsQamScsEcmgProtocolVersion OBJECT-TYPE SYNTAX INTEGER { ver2(1), ver3(2), invalid(255) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the protocol version of ECMG session. The default value is ver2. Options: 1. ver2(1) - The protocol version is ver2. 2. ver3(2) - The protocol version is ver3. 3. invalid(255) - The protocol version is invalid. " DEFVAL { ver2 } ::= { hwDocsQamScsEcmgInfoEntry 9 } -- 1.3.6.1.4.1.2011.6.187.83.1.10 hwDocsQamScsEcmgSuperCasId OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the super conditional access system ID of ECMG session. The default value is 4294967295. " DEFVAL { 4294967295 } ::= { hwDocsQamScsEcmgInfoEntry 10 } -- 1.3.6.1.4.1.2011.6.187.83.1.11 hwDocsQamScsEcmgSectionTsPacketFlag OBJECT-TYPE SYNTAX Unsigned32 (0..2) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the ECM encapsulation format of the ECMG. The default value is 0. " DEFVAL { 0 } ::= { hwDocsQamScsEcmgInfoEntry 11 } -- 1.3.6.1.4.1.2011.6.187.83.1.12 hwDocsQamScsEcmgACDelayStart OBJECT-TYPE SYNTAX Integer32 (-32768..32767 ) UNITS "millisecond" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the ECM AC delay start time of the ECMG. The default value is 0. " DEFVAL { 0 } ::= { hwDocsQamScsEcmgInfoEntry 12 } -- 1.3.6.1.4.1.2011.6.187.83.1.13 hwDocsQamScsEcmgACDelayStop OBJECT-TYPE SYNTAX Integer32 (-32768..32767 ) UNITS "millisecond" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the ECM AC delay stop time of the ECMG. The default value is 0. " DEFVAL { 0 } ::= { hwDocsQamScsEcmgInfoEntry 13 } -- 1.3.6.1.4.1.2011.6.187.83.1.14 hwDocsQamScsEcmgDelayStart OBJECT-TYPE SYNTAX Integer32 (-32768..32767 ) UNITS "millisecond" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the ECM delay start time of the ECMG. The default value is 0. " DEFVAL { 0 } ::= { hwDocsQamScsEcmgInfoEntry 14 } -- 1.3.6.1.4.1.2011.6.187.83.1.15 hwDocsQamScsEcmgDelayStop OBJECT-TYPE SYNTAX Integer32 (-32768..32767 ) UNITS "millisecond" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the ECM delay stop time of the ECMG. The default value is 0. " DEFVAL { 0 } ::= { hwDocsQamScsEcmgInfoEntry 15 } -- 1.3.6.1.4.1.2011.6.187.83.1.16 hwDocsQamScsEcmgTransitionDelayStart OBJECT-TYPE SYNTAX Integer32 (-32768..32767 ) UNITS "millisecond" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the ECM transmission delay start time of the ECMG. The default value is 0. " DEFVAL { 0 } ::= { hwDocsQamScsEcmgInfoEntry 16 } -- 1.3.6.1.4.1.2011.6.187.83.1.17 hwDocsQamScsEcmgTransitionDelayStop OBJECT-TYPE SYNTAX Integer32 (-32768..32767 ) UNITS "millisecond" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the ECM transmission delay stop time of the ECMG. The default value is 0. " DEFVAL { 0 } ::= { hwDocsQamScsEcmgInfoEntry 17 } -- 1.3.6.1.4.1.2011.6.187.83.1.18 hwDocsQamScsEcmgECMRepetitionPeriod OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) UNITS "millisecond" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the ECM send cycle of the ECMG. The default value is 4294967295. " DEFVAL { 4294967295 } ::= { hwDocsQamScsEcmgInfoEntry 18 } -- 1.3.6.1.4.1.2011.6.187.83.1.19 hwDocsQamScsEcmgMaxStreams OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the ECM maximum flow quantity of the ECMG. The default value is 0. " DEFVAL { 0 } ::= { hwDocsQamScsEcmgInfoEntry 19 } -- 1.3.6.1.4.1.2011.6.187.83.1.20 hwDocsQamScsEcmgMinCPDuration OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) UNITS "millisecond" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the Minimum scrambling cycle of the ECMG. The default value is 4294967295. " DEFVAL { 4294967295 } ::= { hwDocsQamScsEcmgInfoEntry 20 } -- 1.3.6.1.4.1.2011.6.187.83.1.21 hwDocsQamScsEcmgLeadCW OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the starting CW of the ECMG. The default value is 0. " DEFVAL { 0 } ::= { hwDocsQamScsEcmgInfoEntry 21 } -- 1.3.6.1.4.1.2011.6.187.83.1.22 hwDocsQamScsEcmgCWperMsg OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the CW number of one message. The default value is 1. " DEFVAL { 1 } ::= { hwDocsQamScsEcmgInfoEntry 22 } -- 1.3.6.1.4.1.2011.6.187.83.1.23 hwDocsQamScsEcmgMaxComputeTime OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) UNITS "millisecond" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates The max computing time of the ECMG. The default value is 4294967295. " DEFVAL { 4294967295 } ::= { hwDocsQamScsEcmgInfoEntry 23 } -- 1.3.6.1.4.1.2011.6.187.83.1.24 hwDocsQamScsEcmgErroStatusCode OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the error code of ECMG session,please read 'ETSI TS 103 197 V1.5.1,chapter 5.6 Error status' for reference. The default value is 0. " DEFVAL { 0 } ::= { hwDocsQamScsEcmgInfoEntry 24 } -- 1.3.6.1.4.1.2011.6.187.83.1.25 hwDocsQamScsEcmgStatisticsReset OBJECT-TYPE SYNTAX INTEGER { clear(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the statistics action. The default value is clear. Options: 1. clear(1) - The statistics action is clear. " DEFVAL { clear } ::= { hwDocsQamScsEcmgInfoEntry 25 } -- 1.3.6.1.4.1.2011.6.187.83.1.26 hwDocsQamScsEcmgStatisticsReceivedTotalMessages OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the total number of receiving messages of SCS ECMG. The default value is 0. " ::= { hwDocsQamScsEcmgInfoEntry 26 } -- 1.3.6.1.4.1.2011.6.187.83.1.27 hwDocsQamScsEcmgStatisticsReceivedChannelTestMessages OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the total number of test messages in the receive channel of SCS ECMG. The default value is 0. " ::= { hwDocsQamScsEcmgInfoEntry 27 } -- 1.3.6.1.4.1.2011.6.187.83.1.28 hwDocsQamScsEcmgStatisticsReceivedChannelStatusMessages OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the total number of staus messages in the receive channel of SCS ECMG. The default value is 0. " ::= { hwDocsQamScsEcmgInfoEntry 28 } -- 1.3.6.1.4.1.2011.6.187.83.1.29 hwDocsQamScsEcmgStatisticsReceivedChannelErrorMessages OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the total number of error messages in the receive channel of SCS ECMG. The default value is 0. " ::= { hwDocsQamScsEcmgInfoEntry 29 } -- 1.3.6.1.4.1.2011.6.187.83.1.30 hwDocsQamScsEcmgStatisticsReceivedStreamTestMessages OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the total number of test messages in the receive flow of SCS ECMG. The default value is 0. " ::= { hwDocsQamScsEcmgInfoEntry 30 } -- 1.3.6.1.4.1.2011.6.187.83.1.31 hwDocsQamScsEcmgStatisticsReceivedStreamStatusMessages OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the total number of status messages in the receive flow of SCS ECMG. The default value is 0. " ::= { hwDocsQamScsEcmgInfoEntry 31 } -- 1.3.6.1.4.1.2011.6.187.83.1.32 hwDocsQamScsEcmgStatisticsReceivedStreamCloseResponseMessages OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the total number of close response messages in the receive flow of SCS ECMG. The default value is 0. " ::= { hwDocsQamScsEcmgInfoEntry 32 } -- 1.3.6.1.4.1.2011.6.187.83.1.33 hwDocsQamScsEcmgStatisticsReceivedStreamErrorMessages OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the total number of error messages in the receive flow of SCS ECMG. The default value is 0. " ::= { hwDocsQamScsEcmgInfoEntry 33 } -- 1.3.6.1.4.1.2011.6.187.83.1.34 hwDocsQamScsEcmgStatisticsReceivedECMResponseMessages OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the total number of response messages in the receive flow of SCS ECMG. The default value is 0. " ::= { hwDocsQamScsEcmgInfoEntry 34 } -- 1.3.6.1.4.1.2011.6.187.83.1.35 hwDocsQamScsEcmgStatisticsSentTotalMessages OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the total number of send messages of SCS ECMG. The default value is 0. " ::= { hwDocsQamScsEcmgInfoEntry 35 } -- 1.3.6.1.4.1.2011.6.187.83.1.36 hwDocsQamScsEcmgStatisticsSentChannelSetupMessages OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the total number of setup messages in the send channel of SCS ECMG. The default value is 0. " ::= { hwDocsQamScsEcmgInfoEntry 36 } -- 1.3.6.1.4.1.2011.6.187.83.1.37 hwDocsQamScsEcmgStatisticsSentChannelTestMessages OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the total number of test messages in the send channel of SCS ECMG. The default value is 0. " ::= { hwDocsQamScsEcmgInfoEntry 37 } -- 1.3.6.1.4.1.2011.6.187.83.1.38 hwDocsQamScsEcmgStatisticsSentChannelStatusMessages OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the total number of status messages in the send channel of SCS ECMG. The default value is 0. " ::= { hwDocsQamScsEcmgInfoEntry 38 } -- 1.3.6.1.4.1.2011.6.187.83.1.39 hwDocsQamScsEcmgStatisticsSentChannelCloseMessages OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the total number of close messages in the send channel of SCS ECMG. The default value is 0. " ::= { hwDocsQamScsEcmgInfoEntry 39 } -- 1.3.6.1.4.1.2011.6.187.83.1.40 hwDocsQamScsEcmgStatisticsSentChannelErrorMessages OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the total number of error messages in the send channel of SCS ECMG. The default value is 0. " ::= { hwDocsQamScsEcmgInfoEntry 40 } -- 1.3.6.1.4.1.2011.6.187.83.1.41 hwDocsQamScsEcmgStatisticsSentStreamSetupMessages OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the total number of setup messages in the send flow of SCS ECMG. The default value is 0. " ::= { hwDocsQamScsEcmgInfoEntry 41 } -- 1.3.6.1.4.1.2011.6.187.83.1.42 hwDocsQamScsEcmgStatisticsSentStreamTestMessages OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the total number of test messages in the send flow of SCS ECMG. The default value is 0. " ::= { hwDocsQamScsEcmgInfoEntry 42 } -- 1.3.6.1.4.1.2011.6.187.83.1.43 hwDocsQamScsEcmgStatisticsSentStreamStatusMessages OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the total number of status messages in the send flow of SCS ECMG. The default value is 0. " ::= { hwDocsQamScsEcmgInfoEntry 43 } -- 1.3.6.1.4.1.2011.6.187.83.1.44 hwDocsQamScsEcmgStatisticsSentStreamCloseRequestMessages OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the total number of close request messages in the send flow of SCS ECMG. The default value is 0. " ::= { hwDocsQamScsEcmgInfoEntry 44 } -- 1.3.6.1.4.1.2011.6.187.83.1.45 hwDocsQamScsEcmgStatisticsSentStreamErrorMessages OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the total number of error messages in the send flow of SCS ECMG. The default value is 0. " ::= { hwDocsQamScsEcmgInfoEntry 45 } -- 1.3.6.1.4.1.2011.6.187.83.1.46 hwDocsQamScsEcmgStatisticsSentCWProvisionMessages OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the total number of CW provision messages of SCS ECMG. The default value is 0. " ::= { hwDocsQamScsEcmgInfoEntry 46 } -- 1.3.6.1.4.1.2011.6.187.84 hwDocsQamScsEcmgEcmTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDocsQamScsEcmgEcmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the EQAM SCS ECMG ECM table. The index of this table is hwDocsQamSCSName, hwDocsQamScsEcmgChannelID and hwDocsQamScsEcmgStreamID. " ::= { hwEqamAn 84 } -- 1.3.6.1.4.1.2011.6.187.84.1 hwDocsQamScsEcmgEcmEntry OBJECT-TYPE SYNTAX HwDocsQamScsEcmgEcmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the EQAM SCS ECMG ECM table. The index of this entry is hwDocsQamSCSName, hwDocsQamScsEcmgChannelID and hwDocsQamScsEcmgStreamID. " INDEX { hwDocsQamSCSName, hwDocsQamScsEcmgChannelID, hwDocsQamScsEcmgStreamID } ::= { hwDocsQamScsEcmgEcmTable 1 } HwDocsQamScsEcmgEcmEntry ::= SEQUENCE { hwDocsQamScsEcmgStreamID Unsigned32, hwDocsQamScsEcmgECMID Unsigned32, hwDocsQamScsEcmgName OCTET STRING, hwDocsQamScsEcmgEcmSuperCasID Unsigned32, hwDocsQamScsEcmgEcmAccessCriteria OCTET STRING, hwDocsQamScsEcmgEcmACTransferMode Unsigned32 } -- 1.3.6.1.4.1.2011.6.187.84.1.1 hwDocsQamScsEcmgStreamID OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the stream ID of ECMG. " ::= { hwDocsQamScsEcmgEcmEntry 1 } -- 1.3.6.1.4.1.2011.6.187.84.1.2 hwDocsQamScsEcmgECMID OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the ECM ID. " DEFVAL { 4294967295 } ::= { hwDocsQamScsEcmgEcmEntry 2 } -- 1.3.6.1.4.1.2011.6.187.84.1.3 hwDocsQamScsEcmgName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..31)) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the ECMG name. The default value is null string. " ::= { hwDocsQamScsEcmgEcmEntry 3 } -- 1.3.6.1.4.1.2011.6.187.84.1.4 hwDocsQamScsEcmgEcmSuperCasID OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the super conditional access system ID of ECMG session. The default value is 0. " DEFVAL { 0 } ::= { hwDocsQamScsEcmgEcmEntry 4 } -- 1.3.6.1.4.1.2011.6.187.84.1.5 hwDocsQamScsEcmgEcmAccessCriteria OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..127)) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the ECMG access criteria. The default value is null string. " ::= { hwDocsQamScsEcmgEcmEntry 5 } -- 1.3.6.1.4.1.2011.6.187.84.1.6 hwDocsQamScsEcmgEcmACTransferMode OBJECT-TYPE SYNTAX Unsigned32 (0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the send mode of ECMG AC. " DEFVAL { 0 } ::= { hwDocsQamScsEcmgEcmEntry 6 } END