-- ============================================================================ -- Copyright (C) 2011 by HUAWEI TECHNOLOGIES. All rights reserved. -- -- Description: -- Reference: -- Version: V1.0 -- History: -- ============================================================================ HUAWEI-ENT-VOICE-DIAGNOSE-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, private, Integer32, Unsigned32 FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF TEXTUAL-CONVENTION FROM SNMPv2-TC IpAddress, TimeTicks, Counter32 FROM SNMPv2-SMI RowStatus, DisplayString FROM SNMPv2-TC hwDatacomm FROM HUAWEI-MIB; hwEntVoiceDiagnoseMIB MODULE-IDENTITY LAST-UPDATED "201107010000Z" ORGANIZATION "Huawei Technologies Co.,Ltd." CONTACT-INFO "Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China Website: http://www.huawei.com Email: support@huawei.com " DESCRIPTION "Huawei VOICE DIAGNOSE mib." -- Revision history REVISION "201107010000Z" DESCRIPTION "V1.0, create this file." ::= { hwDatacomm 314 } --== hwEntPotsCircuitTestTable OBJECT IDENTIFIER ::= { hwEntVoiceDiagnoseMIB 1 } hwEntPotsCircuitTestOprType OBJECT-TYPE SYNTAX INTEGER { stop(1), start(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the operation type." ::= { hwEntPotsCircuitTestTable 1 } hwEntPotsCircuitTestPort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the test port. bits 31-24: reserved bits 23-16: slot index bits 15-8: subcard index bits 7-0: port index " ::= { hwEntPotsCircuitTestTable 2 } hwEntPotsCircuitTestBusyFlag OBJECT-TYPE SYNTAX INTEGER {cancel(1), busytest(2), force(3), defer(4)} MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the process method, when the test port is busy." ::= { hwEntPotsCircuitTestTable 3 } hwEntPotsCircuitTestTimeOut OBJECT-TYPE SYNTAX Integer32 (1..1440) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the time out of busy. (Unit: min) Default: 30" ::= { hwEntPotsCircuitTestTable 4 } hwEntPotsCircuitTestTimeProc OBJECT-TYPE SYNTAX INTEGER { noTest(1), mandatoryTest(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the process method afert time out." ::= { hwEntPotsCircuitTestTable 5 } hwEntPotsCircuitTestStatus OBJECT-TYPE SYNTAX INTEGER { normal(1), testfail(2), portbusy(3), outoftime(4), testingAbnormal(5), testcanceled(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the test result." ::= { hwEntPotsCircuitTestTable 6 } hwEntPotsCircuitTestDigitalVoltageResult OBJECT-TYPE SYNTAX INTEGER { normal(1), abnormal (2), notTested(3)} MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the test result of digital voltage." ::= { hwEntPotsCircuitTestTable 7 } hwEntPotsCircuitTestLowBatteryResult OBJECT-TYPE SYNTAX INTEGER { normal(1), abnormal (2), notTested(3)} MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the test result of low battery." ::= { hwEntPotsCircuitTestTable 8 } hwEntPotsCircuitTestHighBatteryResult OBJECT-TYPE SYNTAX INTEGER { normal(1), abnormal (2), notTested(3)} MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the test result of high battery." ::= { hwEntPotsCircuitTestTable 9 } hwEntPotsCircuitTestPositiveBatteryResult OBJECT-TYPE SYNTAX INTEGER { normal(1), abnormal (2), notTested(3)} MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the test result of positive battery. Default: enable(1)" ::= { hwEntPotsCircuitTestTable 10 } hwEntPotsCircuitTestVAGResult OBJECT-TYPE SYNTAX INTEGER { normal(1), abnormal (2), notTested(3)} MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the test result of a-ground voltage." ::= { hwEntPotsCircuitTestTable 11 } hwEntPotsCircuitTestVBGResult OBJECT-TYPE SYNTAX INTEGER { normal(1), abnormal (2), notTested(3)} MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the test result of b-ground voltage." ::= { hwEntPotsCircuitTestTable 12 } hwEntPotsCircuitTestLoopCurrentResult OBJECT-TYPE SYNTAX INTEGER { normal(1), abnormal (2), notTested(3)} MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the test result of loop current." ::= { hwEntPotsCircuitTestTable 13 } hwEntPotsCircuitTestFeederVoltageResult OBJECT-TYPE SYNTAX INTEGER { normal(1), abnormal (2), notTested(3)} MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the test result of feeder voltage." ::= { hwEntPotsCircuitTestTable 14 } hwEntPotsCircuitTestRingingCurrentVoltageResult OBJECT-TYPE SYNTAX INTEGER { normal(1), abnormal (2), notTested(3)} MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the test result of ringing current voltage." ::= { hwEntPotsCircuitTestTable 15 } hwEntPotsCircuitTestRingingCurrentFrequencyResult OBJECT-TYPE SYNTAX INTEGER { normal(1), abnormal (2), notTested(3)} MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the test result of ringing current frequency." ::= { hwEntPotsCircuitTestTable 16 } hwEntPotsCircuitTestFeedervoltageValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the feeder voltage. (Unit: v)" ::= { hwEntPotsCircuitTestTable 17 } hwEntPotsCircuitTestRingingCurrentVoltageValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the ringing current voltage. (Unit: v)" ::= { hwEntPotsCircuitTestTable 18 } hwEntPotsCircuitTestLoopCurrentValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the loop current. (Unit: mA)" ::= { hwEntPotsCircuitTestTable 19 } --== hwEntPotsLoopTestTable OBJECT IDENTIFIER ::= { hwEntVoiceDiagnoseMIB 2 } hwEntPotsLoopTestOprType OBJECT-TYPE SYNTAX INTEGER { stop(1), start(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the operation type" ::= { hwEntPotsLoopTestTable 1 } hwEntPotsLoopTestPort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the test port. bits 31-24: reserved bits 23-16: slot index bits 15-8: subcard index bits 7-0: port index " ::= { hwEntPotsLoopTestTable 2 } hwEntPotsLoopTestBusyFlag OBJECT-TYPE SYNTAX INTEGER { cancel(1), busytest(2), force(3), defer(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the process method, when the test port is busy." ::= { hwEntPotsLoopTestTable 3 } hwEntPotsLoopTestTimeOut OBJECT-TYPE SYNTAX Integer32 (1..1440) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the time out of busy. (Unit: min) Default: 30" ::= { hwEntPotsLoopTestTable 4 } hwEntPotsLoopTestTimeProc OBJECT-TYPE SYNTAX INTEGER { noTest(1), mandatoryTest(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the process method, after the time out of busy." ::= { hwEntPotsLoopTestTable 5 } hwEntPotsLoopTestVoltage OBJECT-TYPE SYNTAX INTEGER { noSelect(1), select(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the test result of voltage." ::= { hwEntPotsLoopTestTable 6 } hwEntPotsLoopTestResistance OBJECT-TYPE SYNTAX INTEGER { noSelect(1), select(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the test result of resistance." ::= { hwEntPotsLoopTestTable 7 } hwEntPotsLoopTestCapacitance OBJECT-TYPE SYNTAX INTEGER { noSelect(1), select(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the test result of capacitance." ::= { hwEntPotsLoopTestTable 8 } hwEntPotsLoopTestLoopResistance OBJECT-TYPE SYNTAX INTEGER { noSelect(1), select(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the test result of loop resistance." ::= { hwEntPotsLoopTestTable 9 } hwEntPotsLoopTestInverseResistance OBJECT-TYPE SYNTAX INTEGER { noSelect(1), select(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the test result of inverse resistance." ::= { hwEntPotsLoopTestTable 10 } hwEntPotsLoopTestStatus OBJECT-TYPE SYNTAX INTEGER { normal(1), testFail(2), portBusy(3), outofTime(4), testingAbnormal(5), testCanceled(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the test status." ::= { hwEntPotsLoopTestTable 11 } hwEntPotsLoopTestConclusion OBJECT-TYPE SYNTAX Integer32 (1..28) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the test conclusion." ::= { hwEntPotsLoopTestTable 12 } hwEntPotsLoopTestACAGnd OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the a-ground AC voltage. (Unit: v)" ::= { hwEntPotsLoopTestTable 13 } hwEntPotsLoopTestACBGnd OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the b-ground AC voltage. (Unit: v)" ::= { hwEntPotsLoopTestTable 14 } hwEntPotsLoopTestACAB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the a-b AC voltage. (Unit: v)" ::= { hwEntPotsLoopTestTable 15 } hwEntPotsLoopTestDCAGnd OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the a-ground DC voltage. (Unit: v)" ::= { hwEntPotsLoopTestTable 16 } hwEntPotsLoopTestDCBGnd OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the b-ground DC voltage. (Unit: v)" ::= { hwEntPotsLoopTestTable 17 } hwEntPotsLoopTestDCAB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the a-b DC voltage. (Unit: v)" ::= { hwEntPotsLoopTestTable 18 } hwEntPotsLoopTestRAGnd OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the a-ground resistance. (Unit: Om)" ::= { hwEntPotsLoopTestTable 19 } hwEntPotsLoopTestRBGnd OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the b-ground resistance. (Unit: Om)" ::= { hwEntPotsLoopTestTable 20 } hwEntPotsLoopTestRAB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the a-b resistance. (Unit: Om)" ::= { hwEntPotsLoopTestTable 21 } hwEntPotsLoopTestCAGnd OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the a-ground capacitance. (Unit: uF)" ::= { hwEntPotsLoopTestTable 22 } hwEntPotsLoopTestCBGnd OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the b-ground capacitance. (Unit: uF)" ::= { hwEntPotsLoopTestTable 23 } hwEntPotsLoopTestCAB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the a-b capacitance. (Unit: uF)" ::= { hwEntPotsLoopTestTable 24 } hwEntPotsLoopTestLR OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the loop resistance. (Unit: Om)" ::= { hwEntPotsLoopTestTable 25 } hwEntPotsLoopTestRRevPole OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the rev pole resistance. (Unit: Om)" ::= { hwEntPotsLoopTestTable 26 } hwEntPotsLoopTestMSocket OBJECT-TYPE SYNTAX INTEGER { notConnected(1), connected(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the MSocket." ::= { hwEntPotsLoopTestTable 27 } --== hwEntPotsPathTestTable OBJECT IDENTIFIER ::= { hwEntVoiceDiagnoseMIB 3 } hwEntPotsPathTestPort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the test port. bits 31-24: reserved bits 23-16: slot index bits 15-8: subcard index bits 7-0: port index " ::= { hwEntPotsPathTestTable 1 } hwEntPotsPathTestMode OBJECT-TYPE SYNTAX INTEGER { hardware(1), business(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the test type." ::= { hwEntPotsPathTestTable 2 } hwEntPotsPathTestAssistPort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the assist port. bits 31-24: reserved bits 23-16: slot index bits 15-8: subcard index bits 7-0: port index " ::= { hwEntPotsPathTestTable 3 } hwEntPotsPathTestDestTelno OBJECT-TYPE SYNTAX DisplayString(SIZE (1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the destination telephone number." ::= { hwEntPotsPathTestTable 4 } hwEntPotsPathTestOprType OBJECT-TYPE SYNTAX INTEGER { stop(1), start(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the operation type." ::= { hwEntPotsPathTestTable 5 } hwEntPotsPathTestResult OBJECT-TYPE SYNTAX Integer32 (1..23) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the test result." ::= { hwEntPotsPathTestTable 6 } --== hwEntLineTestConfigTable OBJECT IDENTIFIER ::= { hwEntVoiceDiagnoseMIB 4 } hwEntLineTestACVolGate OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the AC voltage gate. (Unit: v) Default: 55" ::= { hwEntLineTestConfigTable 1 } hwEntLineTestDCVolGate OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the DC voltage gate. (Unit: v) Default: 40" ::= { hwEntLineTestConfigTable 2 } hwEntLineTestResistGate OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the resistance gate. (Unit: Om) Default: 20000" ::= { hwEntLineTestConfigTable 3 } hwEntLineTestOffHookRABLow OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the low limit of a-b resistance in off hook. (Unit: Om) Default: 100" ::= { hwEntLineTestConfigTable 4 } hwEntLineTestOffHookRABUp OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the up limit of a-b resistance in off hook. (Unit: Om) Default: 100000" ::= { hwEntLineTestConfigTable 5 } hwEntLineTestLRLow OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the low limit of loop resistance. (Unit: Om) Default: 100" ::= { hwEntLineTestConfigTable 6 } hwEntLineTestLRLUp OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the up limit of loop resistance. (Unit: Om) Default: 2000" ::= { hwEntLineTestConfigTable 7 } hwEntLineTestSelfMixRAB OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the a-b resistance of mix. (Unit: Om) Default: 2000" ::= { hwEntLineTestConfigTable 8 } hwEntLineTestInsRABLow OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the low limit of a-b resistance. (Unit: Om) Default: 2000" ::= { hwEntLineTestConfigTable 9 } hwEntLineTestInsRABUp OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the up limit of a-b resistance. (Unit: Om) Default: 20000" ::= { hwEntLineTestConfigTable 10 } hwEntLineTestCapACUpGate OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the ground capacitance up gate. (Unit: nF) Default: 700" ::= { hwEntLineTestConfigTable 11 } hwEntLineTestCapGroundNormalGate OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the ground capacitance normal gate. (Unit: nF) Default: 200" ::= { hwEntLineTestConfigTable 12 } hwEntLineTestCapACLowGate OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the ground capacitance low gate. (Unit: nF) Default: 350" ::= { hwEntLineTestConfigTable 13 } hwEntLineTestCapGroundNormalSmallGate OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the ground capacitance normal small gate. (Unit: nF) Default: 350" ::= { hwEntLineTestConfigTable 14 } hwEntLineTestAdjustCAB OBJECT-TYPE SYNTAX Integer32 (0..10000000) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the a-b adjest capacitance. (Unit: nF)" ::= { hwEntLineTestConfigTable 15 } hwEntLineTestAdjustCAG OBJECT-TYPE SYNTAX Integer32 (0..10000000) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the a-ground adjest capacitance. (Unit: nF)" ::= { hwEntLineTestConfigTable 16 } hwEntLineTestAdjustCBG OBJECT-TYPE SYNTAX Integer32 (0..10000000) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the b-ground adjest capacitance. (Unit: nF)" ::= { hwEntLineTestConfigTable 17 } hwEntLineTestAdjustRAB OBJECT-TYPE SYNTAX Integer32 (0..10000000) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the a-b adjest resistance. (Unit: Om)" ::= { hwEntLineTestConfigTable 18 } hwEntLineTestAdjustCutPort OBJECT-TYPE SYNTAX Integer32 (0..10000000) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the adjest cut port. bits 31-24: reserved bits 23-16: slot index bits 15-8: subcard index bits 7-0: port index " ::= { hwEntLineTestConfigTable 19 } hwEntLineTestAdjustSelfMixPort OBJECT-TYPE SYNTAX Integer32 (0..10000000) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the adjest self mix port. bits 31-24: reserved bits 23-16: slot index bits 15-8: subcard index bits 7-0: port index " ::= { hwEntLineTestConfigTable 20 } --== hwEntCallerEmulateTable OBJECT-TYPE SYNTAX SEQUENCE OF HwEntCallerEmulateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " A list of hwEntCallerEmulateEntry objects. " ::= { hwEntVoiceDiagnoseMIB 5 } hwEntCallerEmulateEntry OBJECT-TYPE SYNTAX HwEntCallerEmulateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " A list of hwEntCallerEmulateEntry objects. " INDEX { hwEntCallerEmulatePort } ::= { hwEntCallerEmulateTable 1 } HwEntCallerEmulateEntry ::= SEQUENCE { hwEntCallerEmulatePort Integer32, hwEntCallerEmulateOprType INTEGER, hwEntCallerEmulateTelno DisplayString, hwEntCallerEmulateStatus Integer32 } hwEntCallerEmulatePort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the caller port. bits 31-24: reserved bits 23-16: slot index bits 15-8: subcard index bits 7-0: port index " ::= { hwEntCallerEmulateEntry 1 } hwEntCallerEmulateOprType OBJECT-TYPE SYNTAX INTEGER { stop(1), start(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the operation type." ::= { hwEntCallerEmulateEntry 2 } hwEntCallerEmulateTelno OBJECT-TYPE SYNTAX DisplayString(SIZE (1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the telephone number." ::= { hwEntCallerEmulateEntry 3 } hwEntCallerEmulateStatus OBJECT-TYPE SYNTAX Integer32 (19..21) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the test status." ::= { hwEntCallerEmulateEntry 4 } --== hwEntCalledEmulateTable OBJECT-TYPE SYNTAX SEQUENCE OF HwEntCalledEmulateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " A list of hwEntCalledEmulateEntry objects. " ::= { hwEntVoiceDiagnoseMIB 6 } hwEntCalledEmulateEntry OBJECT-TYPE SYNTAX HwEntCalledEmulateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of hwEntCalledEmulateEntry objects." INDEX { hwEntCalledEmulatePort } ::= { hwEntCalledEmulateTable 1 } HwEntCalledEmulateEntry ::= SEQUENCE { hwEntCalledEmulatePort Integer32, hwEntCalledEmulateOprType INTEGER, hwEntCalledEmulateStatus Integer32 } hwEntCalledEmulatePort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the caller port. bits 31-24: reserved bits 23-16: slot index bits 15-8: subcard index bits 7-0: port index " ::= { hwEntCalledEmulateEntry 1 } hwEntCalledEmulateOprType OBJECT-TYPE SYNTAX INTEGER { stop(1), start(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the operation type." ::= { hwEntCalledEmulateEntry 2 } hwEntCalledEmulateStatus OBJECT-TYPE SYNTAX Integer32 (17..19) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the test status." ::= { hwEntCalledEmulateEntry 3 } --== hwEntCallEmulateTable OBJECT-TYPE SYNTAX SEQUENCE OF HwEntCallEmulateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " A list of hwEntCallEmulateEntry objects. " ::= { hwEntVoiceDiagnoseMIB 7 } hwEntCallEmulateEntry OBJECT-TYPE SYNTAX HwEntCallEmulateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of hwEntCallEmulateEntry objects." INDEX { hwEntCallEmulateIndex } ::= { hwEntCallEmulateTable 1 } HwEntCallEmulateEntry ::= SEQUENCE { hwEntCallEmulateIndex Integer32, hwEntCallEmulateOprType INTEGER, hwEntCallEmulateCallerPort Integer32, hwEntCallEmulateCalledPort Integer32, hwEntCallEmulateCalledTelno DisplayString, hwEntCallEmulateStatus Integer32, hwEntCallEmulateResult Integer32 } hwEntCallEmulateIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the test index." ::= { hwEntCallEmulateEntry 1 } hwEntCallEmulateOprType OBJECT-TYPE SYNTAX INTEGER { stop(1), start(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the operation type." ::= { hwEntCallEmulateEntry 2 } hwEntCallEmulateCallerPort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the calller port." ::= { hwEntCallEmulateEntry 3 } hwEntCallEmulateCalledPort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the callled port." ::= { hwEntCallEmulateEntry 4 } hwEntCallEmulateCalledTelno OBJECT-TYPE SYNTAX DisplayString(SIZE (1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the telephone number." ::= { hwEntCallEmulateEntry 5 } hwEntCallEmulateStatus OBJECT-TYPE SYNTAX Integer32 (1..6) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the call status." ::= { hwEntCallEmulateEntry 6 } hwEntCallEmulateResult OBJECT-TYPE SYNTAX Integer32 (1..6) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the call result." ::= { hwEntCallEmulateEntry 7 } hwEntVoiceTestTraps OBJECT IDENTIFIER ::= { hwEntVoiceDiagnoseMIB 8 } hwEntPotsCircuitTestTrap NOTIFICATION-TYPE OBJECTS { hwEntPotsCircuitTestPort, hwEntPotsCircuitTestStatus, hwEntPotsCircuitTestDigitalVoltageResult,hwEntPotsCircuitTestLowBatteryResult, hwEntPotsCircuitTestHighBatteryResult, hwEntPotsCircuitTestPositiveBatteryResult, hwEntPotsCircuitTestVAGResult, hwEntPotsCircuitTestVBGResult, hwEntPotsCircuitTestLoopCurrentResult, hwEntPotsCircuitTestFeederVoltageResult, hwEntPotsCircuitTestRingingCurrentVoltageResult, hwEntPotsCircuitTestRingingCurrentFrequencyResult, hwEntPotsCircuitTestFeedervoltageValue, hwEntPotsCircuitTestRingingCurrentVoltageValue, hwEntPotsCircuitTestLoopCurrentValue } STATUS current DESCRIPTION "circuit test result." ::= { hwEntVoiceTestTraps 1 } hwEntPotsLoopTestTrap NOTIFICATION-TYPE OBJECTS { hwEntPotsLoopTestPort, hwEntPotsLoopTestStatus, hwEntPotsLoopTestConclusion,hwEntPotsLoopTestACAGnd, hwEntPotsLoopTestACBGnd, hwEntPotsLoopTestACAB, hwEntPotsLoopTestDCAGnd, hwEntPotsLoopTestDCBGnd, hwEntPotsLoopTestDCAB, hwEntPotsLoopTestRAGnd, hwEntPotsLoopTestRBGnd, hwEntPotsLoopTestRAB, hwEntPotsLoopTestCAGnd, hwEntPotsLoopTestCBGnd, hwEntPotsLoopTestCAB, hwEntPotsLoopTestLR, hwEntPotsLoopTestRRevPole, hwEntPotsLoopTestMSocket } STATUS current DESCRIPTION "Loop test result." ::= { hwEntVoiceTestTraps 2 } hwEntPotsPathTestTrap NOTIFICATION-TYPE OBJECTS { hwEntPotsPathTestPort, hwEntPotsPathTestResult, hwEntPotsPathTestAssistPort } STATUS current DESCRIPTION "Path test result." ::= { hwEntVoiceTestTraps 3 } hwEntCallEmulateTrap NOTIFICATION-TYPE OBJECTS { hwEntCallEmulateCallerPort, hwEntCallEmulateCalledPort, hwEntCallEmulateResult } STATUS current DESCRIPTION "Call emulate result." ::= { hwEntVoiceTestTraps 4 } -- ============== conformance information ============== hwEntVoiceDiagnoseConformance OBJECT IDENTIFIER ::= { hwEntVoiceDiagnoseMIB 9 } hwEntVoiceDiagnoseCompliances OBJECT IDENTIFIER ::= { hwEntVoiceDiagnoseConformance 1 } hwEntVoiceDiagnoseCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for systems supporting the this module." MODULE -- this module MANDATORY-GROUPS {hwEntPotsCircuitTestGroup, hwEntPotsLoopTestGroup, hwEntPotsPathTestGroup, hwEntLineTestConfigGroup, hwEntCallerEmulateGroup, hwEntCalledEmulateGroup, hwEntCallEmulateGroup, hwEntVoiceTestTrapDefineGroup} ::= { hwEntVoiceDiagnoseCompliances 1 } -- ============== groups ============== hwEntVoiceDiagnoseGroups OBJECT IDENTIFIER ::= { hwEntVoiceDiagnoseConformance 2 } hwEntPotsCircuitTestGroup OBJECT-GROUP OBJECTS { hwEntPotsCircuitTestOprType, hwEntPotsCircuitTestPort, hwEntPotsCircuitTestBusyFlag, hwEntPotsCircuitTestTimeOut, hwEntPotsCircuitTestTimeProc, hwEntPotsCircuitTestStatus, hwEntPotsCircuitTestDigitalVoltageResult, hwEntPotsCircuitTestLowBatteryResult, hwEntPotsCircuitTestHighBatteryResult, hwEntPotsCircuitTestPositiveBatteryResult, hwEntPotsCircuitTestVAGResult, hwEntPotsCircuitTestVBGResult, hwEntPotsCircuitTestLoopCurrentResult, hwEntPotsCircuitTestFeederVoltageResult, hwEntPotsCircuitTestRingingCurrentVoltageResult, hwEntPotsCircuitTestRingingCurrentFrequencyResult, hwEntPotsCircuitTestFeedervoltageValue, hwEntPotsCircuitTestRingingCurrentVoltageValue, hwEntPotsCircuitTestLoopCurrentValue } STATUS current DESCRIPTION "The hwEntPotsCircuitTest group." ::= { hwEntVoiceDiagnoseGroups 1 } hwEntPotsLoopTestGroup OBJECT-GROUP OBJECTS { hwEntPotsLoopTestOprType, hwEntPotsLoopTestPort, hwEntPotsLoopTestBusyFlag, hwEntPotsLoopTestTimeOut, hwEntPotsLoopTestTimeProc, hwEntPotsLoopTestVoltage, hwEntPotsLoopTestResistance, hwEntPotsLoopTestCapacitance, hwEntPotsLoopTestLoopResistance, hwEntPotsLoopTestInverseResistance, hwEntPotsLoopTestStatus, hwEntPotsLoopTestConclusion, hwEntPotsLoopTestACAGnd, hwEntPotsLoopTestACBGnd, hwEntPotsLoopTestACAB, hwEntPotsLoopTestDCAGnd, hwEntPotsLoopTestDCBGnd, hwEntPotsLoopTestDCAB, hwEntPotsLoopTestRAGnd, hwEntPotsLoopTestRBGnd, hwEntPotsLoopTestRAB, hwEntPotsLoopTestCAGnd, hwEntPotsLoopTestCBGnd, hwEntPotsLoopTestCAB, hwEntPotsLoopTestLR, hwEntPotsLoopTestRRevPole, hwEntPotsLoopTestMSocket } STATUS current DESCRIPTION "The hwEntPotsLoopTest group." ::= { hwEntVoiceDiagnoseGroups 2 } hwEntPotsPathTestGroup OBJECT-GROUP OBJECTS { hwEntPotsPathTestPort, hwEntPotsPathTestMode, hwEntPotsPathTestAssistPort, hwEntPotsPathTestDestTelno, hwEntPotsPathTestOprType, hwEntPotsPathTestResult } STATUS current DESCRIPTION "The hwEntPotsPathTest group." ::= { hwEntVoiceDiagnoseGroups 3 } hwEntLineTestConfigGroup OBJECT-GROUP OBJECTS { hwEntLineTestACVolGate, hwEntLineTestDCVolGate, hwEntLineTestResistGate, hwEntLineTestOffHookRABLow, hwEntLineTestOffHookRABUp, hwEntLineTestLRLow, hwEntLineTestLRLUp, hwEntLineTestSelfMixRAB, hwEntLineTestInsRABLow, hwEntLineTestInsRABUp, hwEntLineTestCapACUpGate, hwEntLineTestCapGroundNormalGate, hwEntLineTestCapACLowGate, hwEntLineTestCapGroundNormalSmallGate, hwEntLineTestAdjustCAB, hwEntLineTestAdjustCAG, hwEntLineTestAdjustCBG, hwEntLineTestAdjustRAB, hwEntLineTestAdjustCutPort, hwEntLineTestAdjustSelfMixPort } STATUS current DESCRIPTION "The EntLineTest Config group." ::= { hwEntVoiceDiagnoseGroups 4 } hwEntCallerEmulateGroup OBJECT-GROUP OBJECTS { hwEntCallerEmulatePort, hwEntCallerEmulateOprType, hwEntCallerEmulateTelno, hwEntCallerEmulateStatus } STATUS current DESCRIPTION "The EntCaller Emulate Group." ::= { hwEntVoiceDiagnoseGroups 5 } hwEntCalledEmulateGroup OBJECT-GROUP OBJECTS { hwEntCalledEmulatePort, hwEntCalledEmulateOprType, hwEntCalledEmulateStatus } STATUS current DESCRIPTION "The EntCalled Emulate group." ::= { hwEntVoiceDiagnoseGroups 6 } hwEntCallEmulateGroup OBJECT-GROUP OBJECTS { hwEntCallEmulateIndex, hwEntCallEmulateOprType, hwEntCallEmulateCallerPort, hwEntCallEmulateCalledPort, hwEntCallEmulateCalledTelno, hwEntCallEmulateStatus, hwEntCallEmulateResult } STATUS current DESCRIPTION "The EntCallEmulate group." ::= { hwEntVoiceDiagnoseGroups 7 } hwEntVoiceTestTrapDefineGroup NOTIFICATION-GROUP NOTIFICATIONS { hwEntPotsCircuitTestTrap, hwEntPotsLoopTestTrap, hwEntPotsPathTestTrap, hwEntCallEmulateTrap } STATUS current DESCRIPTION "The EntVoiceTest Trap group." ::= { hwEntVoiceDiagnoseGroups 8 } -- ============== conformance information define end ============== END