-- ================================================================== -- Copyright (C) 2018 by HUAWEI TECHNOLOGIES. All rights reserved. -- -- Description: HUAWEI Private ATM Interface MIB -- Reference: -- Version: V2.17 -- History: -- V1.0 initial -- V1.1 add hwAtmPvcGroupTable and hwAtmPvcGroupMemTable for -- pvc-group; add hwAtmPvcPppTable for PPPoA on demand; add a node -- hwAtmPvcBridgeBroadcast in hwAtmPvcBridgeTable for bridge. -- V1.2 add hwAtmPvcDynamicTable for auto PVC, add hwAtmPvcDynamicPppTable -- for PPP on auto PVC, add hwAtmPvcDynamicBridgeTable for auto PVC, -- add hwAtmDynamicEncapsulateTable for auto PVC. -- V2.11 add hwAtmPvcStatisticInputCellDrops,hwAtmPvcStatisticInputPktDrops, -- hwAtmPvcStatisticOutputCellDrops and hwAtmPvcStatisticOutputPktDrops -- for HwAtmPvcStatisticEntry. -- V2.12 modify the invalid value of hwAtmPvcServiceBuffer and hwAtmPvpServiceBuffer -- from 4294967295 to -1. Modify the MAX-ACCESS of hwAtmVpcConnectivityTestRowStatus -- and hwAtmVccConnectivityTestRowStatus from accessible-for-notify to read-create. -- ================================================================== -- ================================================================== -- -- Variables and types be imported -- -- ================================================================== HUAWEI-ATM-MIB DEFINITIONS ::= BEGIN IMPORTS AtmVpIdentifier, AtmVcIdentifier FROM ATM-TC-MIB atmMIBObjects FROM ATM-MIB hwDatacomm FROM HUAWEI-MIB ifName, InterfaceIndex, InterfaceIndexOrZero FROM IF-MIB OBJECT-GROUP, MODULE-COMPLIANCE ,NOTIFICATION-GROUP FROM SNMPv2-CONF IpAddress, Integer32, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE, Counter64 FROM SNMPv2-SMI RowStatus, TruthValue, DisplayString FROM SNMPv2-TC hwFrameIndex, hwSlotIndex, hwPortIndex FROM HUAWEI-DEVICE-MIB; -- October 17, 2007 at 22:30 GMT -- October 17, 2007 at 22:30 GMT hwAtmMIB MODULE-IDENTITY LAST-UPDATED "201803160000Z" ORGANIZATION "Huawei Technologies Co.,Ltd." CONTACT-INFO "Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China Website: http://www.huawei.com Email: support@huawei.com " DESCRIPTION "V1.3, add hwAtmPvcStatisticInputCellDrops,hwAtmPvcStatisticInputPktDrops, hwAtmPvcStatisticOutputCellDrops and hwAtmPvcStatisticOutputPktDrops for HwAtmPvcStatisticEntry." REVISION "201803160000Z" DESCRIPTION "V2.17, modify default value of hwAtmVccAal5EncapsType and hwAtmPvcDynamicAal5EncapsType." REVISION "201801130000Z" DESCRIPTION "V2.16, modify node description." REVISION "201702170000Z" DESCRIPTION "V2.15, modify the description of hwAtmVpcConnectivityTestResultNotify and hwAtmVccConnectivityTestResultNotify." REVISION "201612270000Z" DESCRIPTION "V2.14, add trap node hwNoAtmResourceAlarmTrap of table hwAtmTraps." REVISION "201509300000Z" DESCRIPTION "V2.13, add hwAtmPvcQueueStatisticTable for pvc-queue." REVISION "201509300000Z" DESCRIPTION "Modify the MAX-ACCESS of hwAtmPvcTransmittalDirection from not-accessible to read-only." REVISION "201407280000Z" DESCRIPTION "Modify the invalid value of hwAtmPvcServiceBuffer and hwAtmPvpServiceBuffer from 4294967295 to -1. Modify the MAX-ACCESS of hwAtmVpcConnectivityTestRowStatus and hwAtmVccConnectivityTestRowStatus from accessible-for-notify to read-create" REVISION "201402180000Z" DESCRIPTION "This MIB is mainly used to configure the ATM OC-3/STM-1 and ATM OC-12/STM-4 interface, IPoA, IPoEoA, PVC service type, OAM F5 loopback, parameters of the VP limit, and mapping between the peer VPI and the local VPI." REVISION "201103250000Z" DESCRIPTION "V1.2, add hwAtmPvcDynamicTable for auto PVC, add hwAtmDynamicPppTable for PPP on auto PVC, add hwAtmDynamicBridgeTable for auto PVC, add hwAtmDynamicEncapsulateTable for auto PVC." REVISION "201009250000Z" DESCRIPTION "V1.1, add hwAtmPvcGroupTable and hwAtmPvcGroupMemTable for pvc-group; add hwAtmPvcPppTable for PPPoA on demand; add a node hwAtmPvcBridgeBroadcast in hwAtmPvcBridgeTable for bridge." REVISION "200710172230Z" DESCRIPTION "V1.0, the initial revision for MIB about ATM protocl." ::= { hwDatacomm 156 } -- -- Node definitions -- -- Node definitions -- hwAtmObjects OBJECT IDENTIFIER ::= { hwAtmMIB 1 } -- hwAtmTable Table -- hwAtmTable OBJECT-TYPE SYNTAX SEQUENCE OF HwAtmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to configure the parameters of the ATM interface." ::= { hwAtmObjects 1 } hwAtmEntry OBJECT-TYPE SYNTAX HwAtmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to configure the parameters of the ATM interface." INDEX { hwAtmIfIndex } ::= { hwAtmTable 1 } HwAtmEntry ::= SEQUENCE { hwAtmIfIndex InterfaceIndex, hwAtmIfType INTEGER, hwAtmClock INTEGER, hwAtmFrameFormat INTEGER, hwAtmScramble TruthValue, hwAtmLoopback INTEGER, hwAtmPitp INTEGER, hwAtmFlagJ0Mode INTEGER, hwAtmFlagJ0Value Integer32, hwAtmFlagJ0Trace OCTET STRING, hwAtmFlagJ1Mode INTEGER, hwAtmFlagJ1Value Integer32, hwAtmFlagJ1Trace OCTET STRING, hwAtmFlagC2Value Integer32 } hwAtmIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the interface index." ::= { hwAtmEntry 1 } hwAtmIfType OBJECT-TYPE SYNTAX INTEGER { oc3OrStm1(1), oc12OrStm4(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the interface type." ::= { hwAtmEntry 11 } hwAtmClock OBJECT-TYPE SYNTAX INTEGER { master(1), slave(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Master clock: uses the internal clock signal. Slave clock: uses the line clock signal." ::= { hwAtmEntry 12 } hwAtmFrameFormat OBJECT-TYPE SYNTAX INTEGER { sdh(1), sonet(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "For the optical interface STM-1/STM-4, the frame format on the ATM interface is SDH; for the OC-3/OC-12 interface, the frame format is SONET. The default frame format is SDH." DEFVAL { sdh } ::= { hwAtmEntry 13 } hwAtmScramble OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "By default, the scramble function is enabled. The scramble function takes effect only on payload rather than cell header. true: enables the scramble function. false: disables the scramble function." DEFVAL { true } ::= { hwAtmEntry 14 } hwAtmLoopback OBJECT-TYPE SYNTAX INTEGER { local(1), remote(2), payload(3), none(255) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable the loopback function of the channel. local: enables the local loopback on the interface. remote: enables the remote loopback on the interface. payload: enables the remote payload loopback on the interface. By default, all loopback functions are disabled." DEFVAL { none } ::= { hwAtmEntry 15 } hwAtmPitp OBJECT-TYPE SYNTAX INTEGER { true(1), false(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable the function of PITP." DEFVAL { false } ::= { hwAtmEntry 16 } hwAtmFlagJ0Mode OBJECT-TYPE SYNTAX INTEGER { j01ByteMode(1), j016ByteMode(2), j064ByteOrNullMode(3), peer(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the overhead byte of the SDH frame. j0: sets section trace byte. The default value is j016ByteMode(2);hwAtmFlagJ0Trace:NetEngine." ::= { hwAtmEntry 17 } hwAtmFlagJ0Value OBJECT-TYPE SYNTAX Integer32 (0..127) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the value of j01ByteMode. When hwAtmFlagJ0Mode is set to j01ByteMode, hwAtmFlagJ0Value takes effect." ::= { hwAtmEntry 18 } hwAtmFlagJ0Trace OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "Set section trace byte. When hwAtmFlagJ0Mode is set to j016ByteMode or j064ByteOrNullMode, this variable takes effect. When hwAtmFlagJ0Mode is set to j016ByteMode, the value of this variable is up to 15 characters trace byte. When hwAtmFlagJ0Mode is set to j064ByteOrNullMode, the value of this variable is up to 64 characters trace byte." ::= { hwAtmEntry 19 } hwAtmFlagJ1Mode OBJECT-TYPE SYNTAX INTEGER { j11ByteMode(1), j116ByteMode(2), j164ByteOrNullMode(3), peer(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the overhead byte of the SDH frame. j1: sets path trace byte. The default value is j116ByteMode(2);hwAtmFlagJ1Trace:NetEngine." ::= { hwAtmEntry 20 } hwAtmFlagJ1Value OBJECT-TYPE SYNTAX Integer32 (0..127) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the value of j11ByteMode. When hwAtmFlagJ1Mode is set to j11ByteMode, hwAtmFlagJ1Value takes effect." ::= { hwAtmEntry 21 } hwAtmFlagJ1Trace OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "Set path trace byte. When hwAtmFlagJ1Mode is set to j116ByteMode or j164ByteOrNullMode, this variable takes effect. When hwAtmFlagJ1Mode is set to j116ByteMode, this variable is up to 15 characters trace byte. When hwAtmFlagJ1Mode is set to j164ByteOrNullMode, this variable is up to 64 characters trace byte." ::= { hwAtmEntry 22 } hwAtmFlagC2Value OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the overhead byte of the SDH frame. c2: indicates the signal label byte. It is a hexdecimal value ranging from 00 to FF. The default value is 0x02." ::= { hwAtmEntry 23 } -- hwAtmMapPvpTable table -- hwAtmMapPvpTable OBJECT-TYPE SYNTAX SEQUENCE OF HwAtmMapPvpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to configure the mapping between the peer VPI and the local VPI." ::= { hwAtmObjects 2 } hwAtmMapPvpEntry OBJECT-TYPE SYNTAX HwAtmMapPvpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to configure the mapping between the peer VPI and the local VPI." INDEX { hwAtmMapPvpIfIndex, hwAtmMapPvpVplVpi } ::= { hwAtmMapPvpTable 1 } HwAtmMapPvpEntry ::= SEQUENCE { hwAtmMapPvpIfIndex InterfaceIndex, hwAtmMapPvpVplVpi AtmVpIdentifier, hwAtmMapPvpRemoteVplVpi AtmVpIdentifier, hwAtmMapPvpBi INTEGER, hwAtmMapPvpRowStatus RowStatus } hwAtmMapPvpIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the interface index." ::= { hwAtmMapPvpEntry 1 } hwAtmMapPvpVplVpi OBJECT-TYPE SYNTAX AtmVpIdentifier MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the local VPI value. The value is an integer. For UNI interface, VPI value ranging from 0 to 255; For NNI interface, VPI value ranging from 0 to 4095." ::= { hwAtmMapPvpEntry 2 } hwAtmMapPvpRemoteVplVpi OBJECT-TYPE SYNTAX AtmVpIdentifier MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the peer VPI value. The value is an integer. For UNI interface, VPI value ranging from 0 to 255; For NNI interface, VPI value ranging from 0 to 4095." ::= { hwAtmMapPvpEntry 11 } -- 1.3.6.1.4.1.2011.5.25.156.1.2.1.12 hwAtmMapPvpBi OBJECT-TYPE SYNTAX INTEGER { downdirectional(0), bidirectional(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { hwAtmMapPvpEntry 12 } hwAtmMapPvpRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This variable is used to create or delete an object." ::= { hwAtmMapPvpEntry 51 } -- hwAtmMapPvcTable table -- hwAtmMapPvcTable OBJECT-TYPE SYNTAX SEQUENCE OF HwAtmMapPvcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to configure the mapping between the peer VPI/VCI and the local VPI/VCI." ::= { hwAtmObjects 3 } hwAtmMapPvcEntry OBJECT-TYPE SYNTAX HwAtmMapPvcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to configure the mapping between the peer VPI/VCI and the local VPI/VCI." INDEX { hwAtmMapPvcIfIndex, hwAtmMapPvcVclVpi, hwAtmMapPvcVclVci } ::= { hwAtmMapPvcTable 1 } HwAtmMapPvcEntry ::= SEQUENCE { hwAtmMapPvcIfIndex InterfaceIndex, hwAtmMapPvcVclVpi AtmVpIdentifier, hwAtmMapPvcVclVci AtmVcIdentifier, hwAtmMapPvcRemoteVclVci AtmVcIdentifier, hwAtmMapPvcRemoteVclVpi AtmVpIdentifier, hwAtmMapPvcBi INTEGER, hwAtmMapPvcRowStatus RowStatus } hwAtmMapPvcIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the interface index." ::= { hwAtmMapPvcEntry 1 } hwAtmMapPvcVclVpi OBJECT-TYPE SYNTAX AtmVpIdentifier MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the local VPI value. The value is an integer. For UNI interface, VPI value ranging from 0 to 255; For NNI interface, VPI value ranging from 0 to 4095." ::= { hwAtmMapPvcEntry 2 } hwAtmMapPvcVclVci OBJECT-TYPE SYNTAX AtmVcIdentifier MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the local VCI value. VCI is short for Virtual Channel Identifier. The VCI value ranges from 0 to 65535. Generally, the values 3, 4 and 65535 are reserved for specail use." ::= { hwAtmMapPvcEntry 3 } hwAtmMapPvcRemoteVclVci OBJECT-TYPE SYNTAX AtmVcIdentifier MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the peer VCI value. VCI is short for Virtual Channel Identifier. The VCI value ranges from 0 to 65535. Generally, the values 3, 4 and 65535 are reserved for specail use." ::= { hwAtmMapPvcEntry 11 } hwAtmMapPvcRemoteVclVpi OBJECT-TYPE SYNTAX AtmVpIdentifier MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the peer VPI value. The value is an integer. For UNI interface, VPI value ranging from 0 to 255; For NNI interface, VPI value ranging from 0 to 4095." ::= { hwAtmMapPvcEntry 12 } -- 1.3.6.1.4.1.2011.5.25.156.1.3.1.13 hwAtmMapPvcBi OBJECT-TYPE SYNTAX INTEGER { downdirectional(0), bidirectional(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { hwAtmMapPvcEntry 13 } hwAtmMapPvcRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This variable is used to create or delete an object." ::= { hwAtmMapPvcEntry 51 } hwAtmServiceTable OBJECT-TYPE SYNTAX SEQUENCE OF HwAtmServiceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to configure the service type and related parameters for the PVC." ::= { hwAtmObjects 4 } hwAtmServiceEntry OBJECT-TYPE SYNTAX HwAtmServiceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to configure the service type for the PVC." INDEX { hwAtmServiceName } ::= { hwAtmServiceTable 1 } HwAtmServiceEntry ::= SEQUENCE { hwAtmServiceName OCTET STRING, hwAtmServiceType INTEGER, hwAtmServiceOutputPcr Integer32, hwAtmServiceOutputScr Integer32, hwAtmServiceOutputMbs Integer32, hwAtmServiceCbrCdvtValue Integer32, hwAtmServiceOutputMcr Integer32, hwAtmServiceRowStatus RowStatus } hwAtmServiceName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the name of the service type. The name is a string of 1 to 31 characters." ::= { hwAtmServiceEntry 1 } hwAtmServiceType OBJECT-TYPE SYNTAX INTEGER { cbr(1), vbrNrt(2), vbrRt(3), ubr(4), ubrPlus(5) } MAX-ACCESS read-create STATUS current DESCRIPTION "Set the service type for the PVC as required." DEFVAL { ubr } ::= { hwAtmServiceEntry 11 } hwAtmServiceOutputPcr OBJECT-TYPE SYNTAX Integer32 (0 | 8..599040) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the peak output rate of the ATM cell. When hwPvcServiceTableType is ubr, the peak output rate is 0." DEFVAL { 149760 } ::= { hwAtmServiceEntry 12 } hwAtmServiceOutputScr OBJECT-TYPE SYNTAX Integer32 (0 | 8..599040) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the peak output rate of the ATM cell. When hwPvcServiceTableType is cbr or ubr, the peak output rate is 0." DEFVAL { 149760 } ::= { hwAtmServiceEntry 13 } hwAtmServiceOutputMbs OBJECT-TYPE SYNTAX Integer32 (0 | 1..512) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the peak output rate of the ATM cell. When hwPvcServiceTableType is cbr or ubr, the peak output rate is 0." ::= { hwAtmServiceEntry 14 } hwAtmServiceCbrCdvtValue OBJECT-TYPE SYNTAX Integer32 (0..10000000) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the limit of the ATM cell delay variation. When hwPvcServiceTableType is cbr, the variable is valid. For other service types, the variable is 0." DEFVAL { 500 } ::= { hwAtmServiceEntry 15 } hwAtmServiceOutputMcr OBJECT-TYPE SYNTAX Integer32 (0 | 8..599040) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the mini width guarantee bit rate of the ATM cell. When hwPvcServiceTableType is ubr, the peak output rate is 0." DEFVAL { 149760 } ::= { hwAtmServiceEntry 16 } hwAtmServiceRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This variable is used to create or delete an object." ::= { hwAtmServiceEntry 51 } hwAtmPvcServiceTable OBJECT-TYPE SYNTAX SEQUENCE OF HwAtmPvcServiceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to configure the service type for the PVC." ::= { hwAtmObjects 5 } hwAtmPvcServiceEntry OBJECT-TYPE SYNTAX HwAtmPvcServiceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to configure the service type for the PVC." INDEX { hwAtmPvcServiceIfIndex, hwAtmPvcServiceVpi, hwAtmPvcServiceVci, hwAtmPvcTransmittalDirection } ::= { hwAtmPvcServiceTable 1 } HwAtmPvcServiceEntry ::= SEQUENCE { hwAtmPvcServiceIfIndex InterfaceIndex, hwAtmPvcServiceVpi AtmVpIdentifier, hwAtmPvcServiceVci AtmVcIdentifier, hwAtmPvcServiceName OCTET STRING, hwAtmPvcTransmittalDirection INTEGER, hwAtmPvcPriority Integer32, hwAtmPvcServiceBuffer Integer32, hwAtmPvcServiceRowStatus RowStatus } hwAtmPvcServiceIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the interface index." ::= { hwAtmPvcServiceEntry 1 } hwAtmPvcServiceVpi OBJECT-TYPE SYNTAX AtmVpIdentifier MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the local VPI value. The value is an integer. For UNI interface, VPI value ranging from 0 to 255; For NNI interface, VPI value ranging from 0 to 4095." ::= { hwAtmPvcServiceEntry 2 } hwAtmPvcServiceVci OBJECT-TYPE SYNTAX AtmVcIdentifier MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the local VCI value. VCI is short for Virtual Channel Identifier. The VCI value ranges from 0 to 65535. Generally, the values 3, 4 and 65535 are reserved for specail use." ::= { hwAtmPvcServiceEntry 3 } hwAtmPvcServiceName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..31)) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the name of the service type. The name is a string of 1 to 31 characters." ::= { hwAtmPvcServiceEntry 11 } hwAtmPvcTransmittalDirection OBJECT-TYPE SYNTAX INTEGER { input(1), output(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the input or output tpye of the service type." ::= { hwAtmPvcServiceEntry 21 } hwAtmPvcPriority OBJECT-TYPE SYNTAX Integer32 (1..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the priority of the output service." DEFVAL { 7 } ::= { hwAtmPvcServiceEntry 22 } hwAtmPvcServiceBuffer OBJECT-TYPE SYNTAX Integer32 (128..8192|-1) MAX-ACCESS read-write STATUS current DESCRIPTION "The range of buffer,0xFFFFFFFF is invalid value for ima/serial interface which not support." ::= { hwAtmPvcServiceEntry 23 } hwAtmPvcServiceRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This variable is used to create or delete an object." ::= { hwAtmPvcServiceEntry 51 } hwAtmVpVlanMapTable OBJECT-TYPE SYNTAX SEQUENCE OF HwAtmVpVlanMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to configure the VP vlan map." ::= { hwAtmObjects 6 } hwAtmVpVlanMapEntry OBJECT-TYPE SYNTAX HwAtmVpVlanMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to configure the VP vlan map." INDEX { hwAtmVpVlanMapIfIndex, hwAtmVpVlanMapVpi, hwAtmVpVlanMapPeVid } ::= { hwAtmVpVlanMapTable 1 } HwAtmVpVlanMapEntry ::= SEQUENCE { hwAtmVpVlanMapIfIndex InterfaceIndex, hwAtmVpVlanMapVpi AtmVpIdentifier, hwAtmVpVlanMapPeVid Integer32, hwAtmVpVlanMapRowStatus RowStatus } hwAtmVpVlanMapIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the interface index." ::= { hwAtmVpVlanMapEntry 1 } hwAtmVpVlanMapVpi OBJECT-TYPE SYNTAX AtmVpIdentifier MAX-ACCESS not-accessible STATUS current DESCRIPTION "VPI." ::= { hwAtmVpVlanMapEntry 2 } hwAtmVpVlanMapPeVid OBJECT-TYPE SYNTAX Integer32 (1..4094) MAX-ACCESS read-create STATUS current DESCRIPTION "PE VLAN ID." ::= { hwAtmVpVlanMapEntry 11 } hwAtmVpVlanMapRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus. " ::= { hwAtmVpVlanMapEntry 51 } hwAtmVcVlanMapTable OBJECT-TYPE SYNTAX SEQUENCE OF HwAtmVcVlanMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to configure the VC vlan map." ::= { hwAtmObjects 7 } hwAtmVcVlanMapEntry OBJECT-TYPE SYNTAX HwAtmVcVlanMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to configure the VC vlan map." INDEX { hwAtmVcVlanMapIfIndex, hwAtmVcVlanMapVpi, hwAtmVcVlanMapCeVid } ::= { hwAtmVcVlanMapTable 1 } HwAtmVcVlanMapEntry ::= SEQUENCE { hwAtmVcVlanMapIfIndex InterfaceIndex, hwAtmVcVlanMapVpi AtmVpIdentifier, hwAtmVcVlanMapBeginVci Integer32, hwAtmVcVlanMapEndVci Integer32, hwAtmVcVlanMapCeVid Integer32, hwAtmVpVlanMapServiceName OCTET STRING, hwAtmVcVlanMapPiority Integer32, hwAtmVcVlanMapPBit Integer32, hwAtmVcVlanMapRowStatus RowStatus } hwAtmVcVlanMapIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the interface index." ::= { hwAtmVcVlanMapEntry 1 } hwAtmVcVlanMapVpi OBJECT-TYPE SYNTAX AtmVpIdentifier MAX-ACCESS not-accessible STATUS current DESCRIPTION "VPI." ::= { hwAtmVcVlanMapEntry 2 } hwAtmVcVlanMapBeginVci OBJECT-TYPE SYNTAX Integer32 (0..2|5..65534) MAX-ACCESS read-create STATUS current DESCRIPTION "Begin VCI Value, not config 3 or 4." ::= { hwAtmVcVlanMapEntry 11 } hwAtmVcVlanMapEndVci OBJECT-TYPE SYNTAX Integer32 (0..2|5..65534) MAX-ACCESS read-create STATUS current DESCRIPTION "End VCI Value, not config 3 or 4." ::= { hwAtmVcVlanMapEntry 12 } hwAtmVcVlanMapCeVid OBJECT-TYPE SYNTAX Integer32 (0..4089) MAX-ACCESS read-create STATUS current DESCRIPTION "CE VLAN ID." ::= { hwAtmVcVlanMapEntry 13 } hwAtmVpVlanMapServiceName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the name of the service type. The name is a string of 1 to 31 characters." ::= { hwAtmVcVlanMapEntry 14 } hwAtmVcVlanMapPiority OBJECT-TYPE SYNTAX Integer32 (1..7) MAX-ACCESS read-create STATUS current DESCRIPTION "Piority." DEFVAL { 1 } ::= { hwAtmVcVlanMapEntry 15 } hwAtmVcVlanMapPBit OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the p-bit value,the default value is 0." DEFVAL { 0 } ::= { hwAtmVcVlanMapEntry 18 } hwAtmVcVlanMapRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus. " ::= { hwAtmVcVlanMapEntry 51 } hwAtmPvpServiceTable OBJECT-TYPE SYNTAX SEQUENCE OF HwAtmPvpServiceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to configure the service type for the PVP." ::= { hwAtmObjects 8 } hwAtmPvpServiceEntry OBJECT-TYPE SYNTAX HwAtmPvpServiceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to configure the service type for the PVP." INDEX { hwAtmPvpServiceIfIndex, hwAtmPvpServiceVpi } ::= { hwAtmPvpServiceTable 1 } HwAtmPvpServiceEntry ::= SEQUENCE { hwAtmPvpServiceIfIndex InterfaceIndex, hwAtmPvpServiceVpi AtmVpIdentifier, hwAtmPvpServiceName OCTET STRING, hwAtmPvpTransmittalDirection INTEGER, hwAtmPvpPriority Integer32, hwAtmPvpServiceBuffer Integer32, hwAtmPvpServiceRowStatus RowStatus } hwAtmPvpServiceIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the interface index." ::= { hwAtmPvpServiceEntry 1 } hwAtmPvpServiceVpi OBJECT-TYPE SYNTAX AtmVpIdentifier MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the local VPI value. The value is an integer. For UNI interface, VPI value ranging from 0 to 255; For NNI interface, VPI value ranging from 0 to 4095." ::= { hwAtmPvpServiceEntry 2 } hwAtmPvpServiceName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..31)) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the name of the service type. The name is a string of 1 to 31 characters." ::= { hwAtmPvpServiceEntry 11 } hwAtmPvpTransmittalDirection OBJECT-TYPE SYNTAX INTEGER { input(1), output(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the input or output tpye of the service type." ::= { hwAtmPvpServiceEntry 21 } hwAtmPvpPriority OBJECT-TYPE SYNTAX Integer32 (1..7) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the priority of the output service." DEFVAL { 7 } ::= { hwAtmPvpServiceEntry 22 } hwAtmPvpServiceBuffer OBJECT-TYPE SYNTAX Integer32 (128..8192|-1) MAX-ACCESS read-write STATUS current DESCRIPTION "The range of buffer,0xFFFFFFFF is invalid value for ima/serial interface which not support" ::= { hwAtmPvpServiceEntry 23 } hwAtmPvpServiceRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This variable is used to create or delete an object." ::= { hwAtmPvpServiceEntry 51 } -- 1.3.6.1.4.1.2011.5.25.156.1.9 hwAtmPvcStatisticTable OBJECT-TYPE SYNTAX SEQUENCE OF HwAtmPvcStatisticEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to configure pvc statistic including inputPackets, inputBytes,inputPktErrors,outputPackets,outputBytes and outputPktErrors." ::= { hwAtmObjects 9 } -- 1.3.6.1.4.1.2011.5.25.156.1.9.1 hwAtmPvcStatisticEntry OBJECT-TYPE SYNTAX HwAtmPvcStatisticEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to configure pvc statistic including inputPackets, inputBytes,inputPktErrors,outputPackets,outputBytes and outputPktErrors." INDEX { hwAtmPvcStatisticIfIndex, hwAtmPvcStatisticVpi, hwAtmPvcStatisticVci } ::= { hwAtmPvcStatisticTable 1 } HwAtmPvcStatisticEntry ::= SEQUENCE { hwAtmPvcStatisticIfIndex InterfaceIndex, hwAtmPvcStatisticVpi AtmVpIdentifier, hwAtmPvcStatisticVci AtmVcIdentifier, hwAtmPvcStatisticInputPackets Counter64, hwAtmPvcStatisticInputBytes Counter64, hwAtmPvcStatisticInputPktErrors Integer32, hwAtmPvcStatisticInputCells Counter64, hwAtmPvcStatisticInputCellErrors Integer32, hwAtmPvcStatisticOutputPackets Counter64, hwAtmPvcStatisticOutputBytes Counter64, hwAtmPvcStatisticOutputPktErrors Integer32, hwAtmPvcStatisticOutputCells Counter64, hwAtmPvcStatisticOutputCellErrors Integer32, hwAtmPvcStatisticInputCellDrops Counter64, hwAtmPvcStatisticInputPktDrops Counter64, hwAtmPvcStatisticOutputCellDrops Counter64, hwAtmPvcStatisticOutputPktDrops Counter64, hwAtmPvcStatisticReset INTEGER } -- 1.3.6.1.4.1.2011.5.25.156.1.9.1.1 hwAtmPvcStatisticIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the interface index." ::= { hwAtmPvcStatisticEntry 1 } -- 1.3.6.1.4.1.2011.5.25.156.1.9.1.2 hwAtmPvcStatisticVpi OBJECT-TYPE SYNTAX AtmVpIdentifier MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the virtual path identifier (VPI) of ATM. The value is an integer. For a UNI, the value ranges from 0 to 255. For an NNI, the value ranges from 0 to 4095." ::= { hwAtmPvcStatisticEntry 2 } -- 1.3.6.1.4.1.2011.5.25.156.1.9.1.3 hwAtmPvcStatisticVci OBJECT-TYPE SYNTAX AtmVcIdentifier MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the virtual channel identifier (VCI) of ATM." ::= { hwAtmPvcStatisticEntry 3 } -- 1.3.6.1.4.1.2011.5.25.156.1.9.1.11 hwAtmPvcStatisticInputPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of received packets." ::= { hwAtmPvcStatisticEntry 11 } -- 1.3.6.1.4.1.2011.5.25.156.1.9.1.12 hwAtmPvcStatisticInputBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of received bytes." ::= { hwAtmPvcStatisticEntry 12 } -- 1.3.6.1.4.1.2011.5.25.156.1.9.1.13 hwAtmPvcStatisticInputPktErrors OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of received error packets." ::= { hwAtmPvcStatisticEntry 13 } -- 1.3.6.1.4.1.2011.5.25.156.1.9.1.14 hwAtmPvcStatisticInputCells OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of received cells." ::= { hwAtmPvcStatisticEntry 14 } -- 1.3.6.1.4.1.2011.5.25.156.1.9.1.15 hwAtmPvcStatisticInputCellErrors OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of received error cells." ::= { hwAtmPvcStatisticEntry 15 } -- 1.3.6.1.4.1.2011.5.25.156.1.9.1.16 hwAtmPvcStatisticOutputPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of sent packets." ::= { hwAtmPvcStatisticEntry 16 } -- 1.3.6.1.4.1.2011.5.25.156.1.9.1.17 hwAtmPvcStatisticOutputBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of sent bytes." ::= { hwAtmPvcStatisticEntry 17 } -- 1.3.6.1.4.1.2011.5.25.156.1.9.1.18 hwAtmPvcStatisticOutputPktErrors OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of sent error packets." ::= { hwAtmPvcStatisticEntry 18 } -- 1.3.6.1.4.1.2011.5.25.156.1.9.1.19 hwAtmPvcStatisticOutputCells OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of sent cells." ::= { hwAtmPvcStatisticEntry 19 } -- 1.3.6.1.4.1.2011.5.25.156.1.9.1.20 hwAtmPvcStatisticOutputCellErrors OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of sent error cells." ::= { hwAtmPvcStatisticEntry 20 } -- 1.3.6.1.4.1.2011.5.25.156.1.9.1.21 hwAtmPvcStatisticInputCellDrops OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of discarded received cells." ::= { hwAtmPvcStatisticEntry 21 } -- 1.3.6.1.4.1.2011.5.25.156.1.9.1.22 hwAtmPvcStatisticInputPktDrops OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of discarded received packets." ::= { hwAtmPvcStatisticEntry 22 } -- 1.3.6.1.4.1.2011.5.25.156.1.9.1.23 hwAtmPvcStatisticOutputCellDrops OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of discarded sent cells." ::= { hwAtmPvcStatisticEntry 23 } -- 1.3.6.1.4.1.2011.5.25.156.1.9.1.24 hwAtmPvcStatisticOutputPktDrops OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of discarded sent packets." ::= { hwAtmPvcStatisticEntry 24 } -- 1.3.6.1.4.1.2011.5.25.156.1.9.1.51 hwAtmPvcStatisticReset OBJECT-TYPE SYNTAX INTEGER { reset(1), ready(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates cleared statistics." ::= { hwAtmPvcStatisticEntry 51 } hwAtmIfConfTable OBJECT-TYPE SYNTAX SEQUENCE OF HwAtmIfConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the configuration of the ATM interface." ::= { hwAtmObjects 11 } hwAtmIfConfEntry OBJECT-TYPE SYNTAX HwAtmIfConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the configuration of the ATM interface." INDEX { hwAtmIfConfIfIndex } ::= { hwAtmIfConfTable 1 } HwAtmIfConfEntry ::= SEQUENCE { hwAtmIfConfIfIndex InterfaceIndex, hwAtmIfConfMaxVccs Integer32, hwAtmIfConfOperVccs Integer32, hwAtmIfConfIntfType INTEGER, hwAtmIfConfCellTransfer TruthValue } hwAtmIfConfIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the interface index." ::= { hwAtmIfConfEntry 1 } hwAtmIfConfMaxVccs OBJECT-TYPE SYNTAX Integer32 (1..16384) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the maximum number of the PVCs. Only main-interfaces encapsulated with ATM protocol can be set." ::= { hwAtmIfConfEntry 11 } hwAtmIfConfOperVccs OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of the configured PVCs." ::= { hwAtmIfConfEntry 12 } hwAtmIfConfIntfType OBJECT-TYPE SYNTAX INTEGER { uni(1), nni(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the type of the serial interface with the ATM protocol. Only main-interfaces encapsulated with ATM protocol can be set." ::= { hwAtmIfConfEntry 13 } hwAtmIfConfCellTransfer OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates whether the cell transfer function is enabled. By default, the cell transfer function is enabled on IMA sub-interfaces and serial sub-interfaces and disabled on other types of interfaces. This object can not be set on IMA sub-interfaces and serial sub-interface. true: enables the cell transfer function. false: disables the cell transfer function." ::= { hwAtmIfConfEntry 14 } hwAtmVplTable OBJECT-TYPE SYNTAX SEQUENCE OF HwAtmVplEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the configuration of the ATM PVP." ::= { hwAtmObjects 12 } hwAtmVplEntry OBJECT-TYPE SYNTAX HwAtmVplEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the configuration of the ATM PVP." INDEX { hwAtmVplIfIndex, hwAtmVplVpi } ::= { hwAtmVplTable 1 } HwAtmVplEntry ::= SEQUENCE { hwAtmVplIfIndex InterfaceIndex, hwAtmVplVpi AtmVpIdentifier, hwAtmVplRowStatus RowStatus } hwAtmVplIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Indicates the interface index." ::= { hwAtmVplEntry 1 } hwAtmVplVpi OBJECT-TYPE SYNTAX AtmVpIdentifier MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "VPI." ::= { hwAtmVplEntry 2 } hwAtmVplRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the status of the row." ::= { hwAtmVplEntry 51 } hwAtmVclTable OBJECT-TYPE SYNTAX SEQUENCE OF HwAtmVclEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the configuration of the ATM PVC." ::= { hwAtmObjects 13 } hwAtmVclEntry OBJECT-TYPE SYNTAX HwAtmVclEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the configuration of the ATM PVC." INDEX { hwAtmVclIfIndex, hwAtmVclVpi, hwAtmVclVci } ::= { hwAtmVclTable 1 } HwAtmVclEntry ::= SEQUENCE { hwAtmVclIfIndex InterfaceIndex, hwAtmVclVpi AtmVpIdentifier, hwAtmVclVci AtmVcIdentifier, hwAtmVclName OCTET STRING, hwAtmVccAal5EncapsType INTEGER, hwAtmVclRowStatus RowStatus, hwAtmVclDescr OCTET STRING } hwAtmVclIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Indicates the interface index." ::= { hwAtmVclEntry 1 } hwAtmVclVpi OBJECT-TYPE SYNTAX AtmVpIdentifier MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "VPI." ::= { hwAtmVclEntry 2 } hwAtmVclVci OBJECT-TYPE SYNTAX AtmVcIdentifier MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "VCI." ::= { hwAtmVclEntry 3 } hwAtmVclName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..16)) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the name of the PVC." ::= { hwAtmVclEntry 11 } hwAtmVccAal5EncapsType OBJECT-TYPE SYNTAX INTEGER { aal5Snap(1), aal5Mux(2), aal5MuxNonstandard(3), aal5Nlpid(4), aal5NlpidIetf(5), aal5Auto(6) } MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the encapsulation mode of AAL5. aal5snap: LLC/SNAP (Logical Link Control (LLC)/Subnet Access Protocol (SNAP)) encapsulation type. aal5mux: MUX encapsulation type. aal5muxnonstandard: nonstandard MUX encapsulation type, which used to interconnect other devices. aal5nlpid: RFC1490 encapsulation type. aal5nlpidietf: RFC1490 encapsulation type, which used to differentiate with aal5nlpid for ISIS. aal5Auto: Auto encapsulation type. " DEFVAL { aal5Snap } ::= { hwAtmVclEntry 12 } hwAtmVclRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the status of the row." ::= { hwAtmVclEntry 51 } hwAtmVclDescr OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..128)) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the Description of the PVC." ::= { hwAtmVclEntry 52 } hwAtmPvcIpoaTable OBJECT-TYPE SYNTAX SEQUENCE OF HwAtmPvcIpoaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to configure the IPoA mapping on the PVC." ::= { hwAtmObjects 14 } hwAtmPvcIpoaEntry OBJECT-TYPE SYNTAX HwAtmPvcIpoaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to configure the IPoA mapping on the PVC." INDEX { hwAtmVclIfIndex, hwAtmVclVpi, hwAtmVclVci, hwAtmPvcIpoaType, hwAtmPvcIpoaIpAddress } ::= { hwAtmPvcIpoaTable 1 } HwAtmPvcIpoaEntry ::= SEQUENCE { hwAtmPvcIpoaType INTEGER, hwAtmPvcIpoaIpAddress IpAddress, hwAtmPvcIpoaIpMask IpAddress, hwAtmPvcIpoaInarpInterval Integer32, hwAtmPvcIpoaBroadcast TruthValue, hwAtmPvcIpoaRowStatus RowStatus } hwAtmPvcIpoaType OBJECT-TYPE SYNTAX INTEGER { ip(1), default(2), inarp(3) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the type of the PVC IPoA mapping. ip: sets the peer IP address and mask that are mapped to the PVC. default: configures a mapping with default route attributes. If no mapping of the next hop address of a packet can be found, the packet is sent over the PVC if the PVC is configured with default mapping. inarp: configures InARP on the PVC." ::= { hwAtmPvcIpoaEntry 3 } hwAtmPvcIpoaIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the peer IP address mapped to the PVC." ::= { hwAtmPvcIpoaEntry 4 } hwAtmPvcIpoaIpMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the IP address mask. The IP address mask is an optional parameter." ::= { hwAtmPvcIpoaEntry 11 } hwAtmPvcIpoaInarpInterval OBJECT-TYPE SYNTAX Integer32 (0 | 1..600) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the interval for sending InARP packets. The parameter is optional. The value ranges from 1 to 600 in seconds. If the type of the PVC IPoA mapping is IP or default, the value is 0. The default value is 1." DEFVAL { 1 } ::= { hwAtmPvcIpoaEntry 12 } hwAtmPvcIpoaBroadcast OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "If a mapping with this attribute is configured on the PVC, broadcast packets on the interface where the PVC resides will be sent over the PVC." DEFVAL { false } ::= { hwAtmPvcIpoaEntry 13 } hwAtmPvcIpoaRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus." ::= { hwAtmPvcIpoaEntry 51 } hwAtmPvcBridgeTable OBJECT-TYPE SYNTAX SEQUENCE OF HwAtmPvcBridgeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to configure the IPoEoA mapping and PPPoEoA mapping on the PVC." ::= { hwAtmObjects 15 } hwAtmPvcBridgeEntry OBJECT-TYPE SYNTAX HwAtmPvcBridgeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to configure the IPoEoA mapping and PPPoEoA mapping on the PVC." INDEX { hwAtmVclIfIndex, hwAtmVclVpi, hwAtmVclVci } ::= { hwAtmPvcBridgeTable 1 } HwAtmPvcBridgeEntry ::= SEQUENCE { hwAtmPvcBridgeDstIfIndex InterfaceIndexOrZero, hwAtmPvcBridgeBroadcast TruthValue, hwAtmPvcBridgeRowStatus RowStatus } hwAtmPvcBridgeDstIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the index of the VE interface." ::= { hwAtmPvcBridgeEntry 11 } hwAtmPvcBridgeBroadcast OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the PVC can forward bridge packets." DEFVAL { false } ::= { hwAtmPvcBridgeEntry 12 } hwAtmPvcBridgeRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus. Only 'createAndGo' and 'destroy' is supported." ::= { hwAtmPvcBridgeEntry 51 } hwAtmPvcOAMLoopbackTable OBJECT-TYPE SYNTAX SEQUENCE OF HwAtmPvcOAMLoopbackEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to configure OAM F5 Loopback, enable the sending of OAM F5 Loopback cells, and configure the parameters of the retransmission check or modify the parameters of the retransmission check." ::= { hwAtmObjects 17 } hwAtmPvcOAMLoopbackEntry OBJECT-TYPE SYNTAX HwAtmPvcOAMLoopbackEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to configure OAM F5 Loopback." INDEX { hwAtmVclIfIndex, hwAtmVclVpi, hwAtmVclVci } ::= { hwAtmPvcOAMLoopbackTable 1 } HwAtmPvcOAMLoopbackEntry ::= SEQUENCE { hwAtmPvcOAMLoopbackFrequency Integer32, hwAtmPvcOAMLoopbackUpCount Integer32, hwAtmPvcOAMLoopbackDownCount Integer32, hwAtmPvcOAMLoopbackRetryFrequency Integer32, hwAtmPvcOAMLoopbackRowStatus RowStatus } hwAtmPvcOAMLoopbackFrequency OBJECT-TYPE SYNTAX Integer32 (1..600) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the interval for sending OAM F5 Loopback cells." ::= { hwAtmPvcOAMLoopbackEntry 11 } hwAtmPvcOAMLoopbackUpCount OBJECT-TYPE SYNTAX Integer32 (1..600) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the number of continuous OAM F5 Loopback cells that must be received before the PVC turns Up." DEFVAL { 3 } ::= { hwAtmPvcOAMLoopbackEntry 12 } hwAtmPvcOAMLoopbackDownCount OBJECT-TYPE SYNTAX Integer32 (1..600) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the number of continuous OAM F5 Loopback cells that are not received before the PVC turns Down." DEFVAL { 5 } ::= { hwAtmPvcOAMLoopbackEntry 13 } hwAtmPvcOAMLoopbackRetryFrequency OBJECT-TYPE SYNTAX Integer32 (1..1000) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the interval for sending cells during OAM F5 Loopback retransmission verification before the PVC status changes." ::= { hwAtmPvcOAMLoopbackEntry 14 } hwAtmPvcOAMLoopbackRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus" ::= { hwAtmPvcOAMLoopbackEntry 51 } hwAtmPvpLimitTable OBJECT-TYPE SYNTAX SEQUENCE OF HwAtmPvpLimitEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to configure the VP limit. To monitor the VP, configure related VP parameters." ::= { hwAtmObjects 18 } hwAtmPvpLimitEntry OBJECT-TYPE SYNTAX HwAtmPvpLimitEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to configure the VP limit." INDEX { hwAtmPvpLimitIfIndex, hwAtmPvpLimitVpi } ::= { hwAtmPvpLimitTable 1 } HwAtmPvpLimitEntry ::= SEQUENCE { hwAtmPvpLimitIfIndex InterfaceIndex, hwAtmPvpLimitVpi AtmVpIdentifier, hwAtmPvpLimitPeakRate Integer32, hwAtmPvpLimitRowStatus RowStatus } hwAtmPvpLimitIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the interface index." ::= { hwAtmPvpLimitEntry 1 } hwAtmPvpLimitVpi OBJECT-TYPE SYNTAX AtmVpIdentifier MAX-ACCESS not-accessible STATUS current DESCRIPTION "VPI." ::= { hwAtmPvpLimitEntry 2 } hwAtmPvpLimitPeakRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "VCI." ::= { hwAtmPvpLimitEntry 11 } hwAtmPvpLimitRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus. " ::= { hwAtmPvpLimitEntry 51 } -- -- hwAtmPvcPppTable -- hwAtmPvcPppTable OBJECT-TYPE SYNTAX SEQUENCE OF HwAtmPvcPppEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to configure the PPPoA mapping on the PVC." ::= { hwAtmObjects 16 } hwAtmPvcPppEntry OBJECT-TYPE SYNTAX HwAtmPvcPppEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to configure the PPPoA mapping on the PVC." INDEX { hwAtmVclIfIndex, hwAtmVclVpi, hwAtmVclVci } ::= { hwAtmPvcPppTable 1 } HwAtmPvcPppEntry::= SEQUENCE { hwAtmPvcPppDstIfIndex InterfaceIndex, hwAtmPvcPppServer TruthValue, hwAtmPvcPppRowStatus RowStatus } hwAtmPvcPppDstIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the index of the VT or dialer interface." ::= { hwAtmPvcPppEntry 11 } hwAtmPvcPppServer OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the node is server or not. By default, the node is not server. true: indicates the node is server. false: indicates the node is not server. " DEFVAL { false } ::= { hwAtmPvcPppEntry 12 } hwAtmPvcPppRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus. Only 'createAndGo' and 'destroy' is supported." ::= { hwAtmPvcPppEntry 51 } -- -- hwAtmPvcGroupTable -- hwAtmPvcGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF HwAtmPvcGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to create or delete the pvc-group, and get the TOS type or state of the pvc-group." ::= { hwAtmObjects 19 } hwAtmPvcGroupEntry OBJECT-TYPE SYNTAX HwAtmPvcGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to create or delete the pvc-group, and get the TOS type or state of the pvc-group." INDEX { hwAtmVclIfIndex, hwAtmVclVpi, hwAtmVclVci } ::= { hwAtmPvcGroupTable 1 } HwAtmPvcGroupEntry::= SEQUENCE { hwAtmPvcGroupTosType INTEGER, hwAtmPvcGroupState INTEGER, hwAtmPvcGroupName OCTET STRING, hwAtmPvcGroupRowStatus RowStatus } hwAtmPvcGroupTosType OBJECT-TYPE SYNTAX INTEGER { none(1), precedence(2), dscp(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the TOS type. The default value is 1." ::= { hwAtmPvcGroupEntry 1 } hwAtmPvcGroupState OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the state of the pvc-group." ::= { hwAtmPvcGroupEntry 2 } hwAtmPvcGroupName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the name of the pvc-group. Only support visible characters." ::= { hwAtmPvcGroupEntry 3 } hwAtmPvcGroupRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus. Only 'createAndGo' and 'destroy' is supported. " ::= { hwAtmPvcGroupEntry 51 } -- -- hwAtmPvcGroupMemTable -- hwAtmPvcGroupMemTable OBJECT-TYPE SYNTAX SEQUENCE OF HwAtmPvcGroupMemEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to configure the member PVC and TOS type and TOS type value on the pvc-group." ::= { hwAtmObjects 20 } hwAtmPvcGroupMemEntry OBJECT-TYPE SYNTAX HwAtmPvcGroupMemEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to configure the member PVC and TOS type and TOS type value on the pvc-group." INDEX { hwAtmVclIfIndex, hwAtmVclVpi, hwAtmVclVci, hwAtmPvcGroupMemVpi, hwAtmPvcGroupMemVci } ::= { hwAtmPvcGroupMemTable 1 } HwAtmPvcGroupMemEntry::= SEQUENCE { hwAtmPvcGroupMemVpi Integer32, hwAtmPvcGroupMemVci Integer32, hwAtmPvcGroupMemName OCTET STRING, hwAtmPvcGroupMemMinGrade Integer32, hwAtmPvcGroupMemMaxGrade Integer32, hwAtmPvcGroupMemDefault TruthValue, hwAtmPvcGroupMemTosType INTEGER, hwAtmPvcGroupMemRowStatus RowStatus } hwAtmPvcGroupMemVpi OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the VPI of the member PVC in pvc-group." ::= { hwAtmPvcGroupMemEntry 1 } hwAtmPvcGroupMemVci OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the VCI of the member PVC in pvc-group." ::= { hwAtmPvcGroupMemEntry 2 } hwAtmPvcGroupMemName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..16)) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the name of the member PVC of the pvc-group. Only support visible characters." ::= { hwAtmPvcGroupMemEntry 3 } hwAtmPvcGroupMemMinGrade OBJECT-TYPE SYNTAX Integer32 (0..63 | 255) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the minimum value of the TOS with one member PVC. If the TOS type is precedence, the maximum value cannot be larger than 7. Return 255 when this value is not configed." ::= { hwAtmPvcGroupMemEntry 4 } hwAtmPvcGroupMemMaxGrade OBJECT-TYPE SYNTAX Integer32 (0..63 | 255) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the maximum value of the TOS with one member PVC. If the TOS type is precedence, the maximum value cannot be larger than 7. Return 255 when this value is not configed." ::= { hwAtmPvcGroupMemEntry 5 } hwAtmPvcGroupMemDefault OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the PVC is default PVC or not. By default, the default TOS is disabled. true: with default. false: without default." DEFVAL { false } ::= { hwAtmPvcGroupMemEntry 6 } hwAtmPvcGroupMemTosType OBJECT-TYPE SYNTAX INTEGER { none(1), precedence(2), dscp(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the TOS type. The default value is 1." ::= { hwAtmPvcGroupMemEntry 7 } hwAtmPvcGroupMemRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus. Only 'createAndGo' and 'destroy' is supported. " ::= { hwAtmPvcGroupMemEntry 51 } -- hwAtmPvcDynamicTable hwAtmPvcDynamicTable OBJECT-TYPE SYNTAX SEQUENCE OF HwAtmPvcDynamicEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to configure the auto PVC." ::= { hwAtmObjects 21 } hwAtmPvcDynamicEntry OBJECT-TYPE SYNTAX HwAtmPvcDynamicEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to configure the auto PVC." INDEX { hwAtmPvcDynamicIfIndex, hwAtmPvcDynamicStartVpi, hwAtmPvcDynamicStartVci, hwAtmPvcDynamicEndVpi, hwAtmPvcDynamicEndVci } ::= { hwAtmPvcDynamicTable 1 } HwAtmPvcDynamicEntry::= SEQUENCE { hwAtmPvcDynamicIfIndex InterfaceIndex, hwAtmPvcDynamicStartVpi AtmVpIdentifier, hwAtmPvcDynamicStartVci AtmVcIdentifier, hwAtmPvcDynamicEndVpi AtmVpIdentifier, hwAtmPvcDynamicEndVci AtmVcIdentifier, hwAtmPvcDynamicAdminStatus INTEGER, hwAtmPvcDynamicAal5EncapsType INTEGER, hwAtmPvcDynamicRowStatus RowStatus } hwAtmPvcDynamicIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the index of ATM interface which support auto PVC." ::= { hwAtmPvcDynamicEntry 1 } hwAtmPvcDynamicStartVpi OBJECT-TYPE SYNTAX AtmVpIdentifier MAX-ACCESS not-accessible STATUS current DESCRIPTION "The start VPI of auto PVC." ::= { hwAtmPvcDynamicEntry 2 } hwAtmPvcDynamicStartVci OBJECT-TYPE SYNTAX AtmVcIdentifier MAX-ACCESS not-accessible STATUS current DESCRIPTION "The start VCI of auto PVC." ::= { hwAtmPvcDynamicEntry 3 } hwAtmPvcDynamicEndVpi OBJECT-TYPE SYNTAX AtmVpIdentifier MAX-ACCESS not-accessible STATUS current DESCRIPTION "The end VPI of auto PVC." ::= { hwAtmPvcDynamicEntry 4 } hwAtmPvcDynamicEndVci OBJECT-TYPE SYNTAX AtmVcIdentifier MAX-ACCESS not-accessible STATUS current DESCRIPTION "The end VCI of auto PVC." ::= { hwAtmPvcDynamicEntry 5 } hwAtmPvcDynamicAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the administrative status of auto PVC." DEFVAL { up } ::= { hwAtmPvcDynamicEntry 6 } hwAtmPvcDynamicAal5EncapsType OBJECT-TYPE SYNTAX INTEGER { aal5Snap(1), aal5Mux(2), aal5MuxNonstandard(3), aal5Nlpid(4), aal5NlpidIetf(5), aal5Auto(6) } MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the encapsulation mode of AAL5. aal5snap: LLC/SNAP (Logical Link Control (LLC)/Subnet Access Protocol (SNAP)) encapsulation type. aal5mux: MUX encapsulation type. aal5muxnonstandard: nonstandard MUX encapsulation type, which used to interconnect other devices. aal5nlpid: RFC1490 encapsulation type. aal5nlpidietf: RFC1490 encapsulation type, which used to differentiate with aal5nlpid for ISIS. aal5Auto: Auto encapsulation type." DEFVAL { aal5Snap } ::= { hwAtmPvcDynamicEntry 7 } hwAtmPvcDynamicRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus. Only 'createAndGo' and 'destroy' is supported. " ::= { hwAtmPvcDynamicEntry 8 } -- hwAtmPvcDynamicPppTable hwAtmPvcDynamicPppTable OBJECT-TYPE SYNTAX SEQUENCE OF HwAtmPvcDynamicPppEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to configure the map PPP on auto PVC." ::= { hwAtmObjects 22 } hwAtmPvcDynamicPppEntry OBJECT-TYPE SYNTAX HwAtmPvcDynamicPppEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to configure the map PPP on auto PVC." INDEX { hwAtmPvcDynamicIfIndex, hwAtmPvcDynamicStartVpi, hwAtmPvcDynamicStartVci, hwAtmPvcDynamicEndVpi, hwAtmPvcDynamicEndVci } ::= { hwAtmPvcDynamicPppTable 1 } HwAtmPvcDynamicPppEntry::= SEQUENCE { hwAtmPvcDynamicPppDstIfIndex InterfaceIndex, hwAtmPvcDynamicPppRowStatus RowStatus } hwAtmPvcDynamicPppDstIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the index of the VT interface." ::= { hwAtmPvcDynamicPppEntry 1 } hwAtmPvcDynamicPppRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus. Only 'createAndGo' and 'destroy' is supported. " ::= { hwAtmPvcDynamicPppEntry 2 } --hwAtmPvcDynamicBridgeTable hwAtmPvcDynamicBridgeTable OBJECT-TYPE SYNTAX SEQUENCE OF HwAtmPvcDynamicBridgeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to configure the map bridge on auto PVC." ::= { hwAtmObjects 23 } hwAtmPvcDynamicBridgeEntry OBJECT-TYPE SYNTAX HwAtmPvcDynamicBridgeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to configure the map bridge on auto PVC." INDEX { hwAtmPvcDynamicIfIndex, hwAtmPvcDynamicStartVpi, hwAtmPvcDynamicStartVci, hwAtmPvcDynamicEndVpi, hwAtmPvcDynamicEndVci } ::= { hwAtmPvcDynamicBridgeTable 1 } HwAtmPvcDynamicBridgeEntry::= SEQUENCE { hwAtmPvcDynamicBridgeDstIfIndex InterfaceIndex, hwAtmPvcDynamicBridgeRowStatus RowStatus } hwAtmPvcDynamicBridgeDstIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the index of the VE interface." ::= { hwAtmPvcDynamicBridgeEntry 1 } hwAtmPvcDynamicBridgeRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus. Only 'createAndGo' and 'destroy' is supported." ::= { hwAtmPvcDynamicBridgeEntry 2 } hwAtmTrunkTable OBJECT-TYPE SYNTAX SEQUENCE OF HwAtmTrunkEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to configure the parameters of the atm trunk interface." ::= { hwAtmObjects 24 } hwAtmTrunkEntry OBJECT-TYPE SYNTAX HwAtmTrunkEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to configure the parameters of the atm trunk interface." INDEX { hwAtmTrunkIfIndex } ::= { hwAtmTrunkTable 1 } HwAtmTrunkEntry ::= SEQUENCE { hwAtmTrunkIfIndex InterfaceIndex, hwAtmTrunkWorkMode INTEGER } hwAtmTrunkIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the interface index." ::= { hwAtmTrunkEntry 1 } hwAtmTrunkWorkMode OBJECT-TYPE SYNTAX INTEGER { true(1), false(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the work mode of atm trunk." DEFVAL { false } ::= { hwAtmTrunkEntry 2 } -- 1.3.6.1.4.1.2011.5.25.156.1.25 hwAtmVpcConnectivityTestTable OBJECT-TYPE SYNTAX SEQUENCE OF HwAtmVpcConnectivityTestEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." ::= { hwAtmObjects 25 } -- 1.3.6.1.4.1.2011.5.25.156.1.25.1 hwAtmVpcConnectivityTestEntry OBJECT-TYPE SYNTAX HwAtmVpcConnectivityTestEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." INDEX { hwAtmVpcConnectivityTestIfIndex, hwAtmVpcConnectivityTestVpi, hwAtmVpcConnectivityTestLLID } ::= { hwAtmVpcConnectivityTestTable 1 } HwAtmVpcConnectivityTestEntry ::= SEQUENCE { hwAtmVpcConnectivityTestIfIndex InterfaceIndex, hwAtmVpcConnectivityTestVpi AtmVpIdentifier, hwAtmVpcConnectivityTestLLID DisplayString, hwAtmVpcConnectivityTestResult Integer32, hwAtmVpcConnectivityTestIfName DisplayString, hwAtmVpcConnectivityTestRowStatus RowStatus } -- 1.3.6.1.4.1.2011.5.25.156.1.25.1.1 hwAtmVpcConnectivityTestIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Indicates the interface index." ::= { hwAtmVpcConnectivityTestEntry 1 } -- 1.3.6.1.4.1.2011.5.25.156.1.25.1.2 hwAtmVpcConnectivityTestVpi OBJECT-TYPE SYNTAX AtmVpIdentifier MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "VPI." ::= { hwAtmVpcConnectivityTestEntry 2 } -- 1.3.6.1.4.1.2011.5.25.156.1.25.1.3 hwAtmVpcConnectivityTestLLID OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Loopback Local Identify." ::= { hwAtmVpcConnectivityTestEntry 3 } -- 1.3.6.1.4.1.2011.5.25.156.1.25.1.4 hwAtmVpcConnectivityTestResult OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Indicates the result of the test." ::= { hwAtmVpcConnectivityTestEntry 4 } -- 1.3.6.1.4.1.2011.5.25.156.1.25.1.5 hwAtmVpcConnectivityTestIfName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Indicates the interface name." ::= { hwAtmVpcConnectivityTestEntry 5 } -- 1.3.6.1.4.1.2011.5.25.156.1.25.1.51 hwAtmVpcConnectivityTestRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the status of the row." ::= { hwAtmVpcConnectivityTestEntry 51 } -- 1.3.6.1.4.1.2011.5.25.156.1.26 hwAtmVccConnectivityTestTable OBJECT-TYPE SYNTAX SEQUENCE OF HwAtmVccConnectivityTestEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." ::= { hwAtmObjects 26 } -- 1.3.6.1.4.1.2011.5.25.156.1.26.1 hwAtmVccConnectivityTestEntry OBJECT-TYPE SYNTAX HwAtmVccConnectivityTestEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Description." INDEX { hwAtmVccConnectivityTestIfIndex, hwAtmVccConnectivityTestVpi, hwAtmVccConnectivityTestVci, hwAtmVccConnectivityTestLLID } ::= { hwAtmVccConnectivityTestTable 1 } HwAtmVccConnectivityTestEntry ::= SEQUENCE { hwAtmVccConnectivityTestIfIndex InterfaceIndex, hwAtmVccConnectivityTestVpi AtmVpIdentifier, hwAtmVccConnectivityTestVci AtmVcIdentifier, hwAtmVccConnectivityTestLLID DisplayString, hwAtmVccConnectivityTestResult Integer32, hwAtmVccConnectivityTestIfName DisplayString, hwAtmVccConnectivityTestRowStatus RowStatus } -- 1.3.6.1.4.1.2011.5.25.156.1.26.1.1 hwAtmVccConnectivityTestIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Indicates the interface index." ::= { hwAtmVccConnectivityTestEntry 1 } -- 1.3.6.1.4.1.2011.5.25.156.1.26.1.2 hwAtmVccConnectivityTestVpi OBJECT-TYPE SYNTAX AtmVpIdentifier MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "VPI." ::= { hwAtmVccConnectivityTestEntry 2 } -- 1.3.6.1.4.1.2011.5.25.156.1.26.1.3 hwAtmVccConnectivityTestVci OBJECT-TYPE SYNTAX AtmVcIdentifier MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "VCI." ::= { hwAtmVccConnectivityTestEntry 3 } -- 1.3.6.1.4.1.2011.5.25.156.1.26.1.4 hwAtmVccConnectivityTestLLID OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Loopback Local Identify." ::= { hwAtmVccConnectivityTestEntry 4 } -- 1.3.6.1.4.1.2011.5.25.156.1.26.1.5 hwAtmVccConnectivityTestResult OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Indicates the result of the test." ::= { hwAtmVccConnectivityTestEntry 5 } -- 1.3.6.1.4.1.2011.5.25.156.1.26.1.6 hwAtmVccConnectivityTestIfName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Indicates the interface name." ::= { hwAtmVccConnectivityTestEntry 6 } -- 1.3.6.1.4.1.2011.5.25.156.1.26.1.51 hwAtmVccConnectivityTestRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the status of the row." ::= { hwAtmVccConnectivityTestEntry 51 } -- hwAtmPvcQueueStatisticTable -- 1.3.6.1.4.1.2011.5.25.156.1.27 hwAtmPvcQueueStatisticTable OBJECT-TYPE SYNTAX SEQUENCE OF HwAtmPvcQueueStatisticEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to configure pvc-queue statistic including outputPackets, outputBytes and outputDropPackets." ::= { hwAtmObjects 27 } -- 1.3.6.1.4.1.2011.5.25.156.1.27.1 hwAtmPvcQueueStatisticEntry OBJECT-TYPE SYNTAX HwAtmPvcQueueStatisticEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to configure pvc-queue statistic including outputPackets, outputBytes and outputDropPackets." INDEX { hwAtmPvcQueueStatisticIfIndex, hwAtmPvcQueueStatisticVpi, hwAtmPvcQueueStatisticVci, hwAtmPvcQueueStatisticQueueIndex } ::= { hwAtmPvcQueueStatisticTable 1 } HwAtmPvcQueueStatisticEntry ::= SEQUENCE { hwAtmPvcQueueStatisticIfIndex InterfaceIndex, hwAtmPvcQueueStatisticVpi AtmVpIdentifier, hwAtmPvcQueueStatisticVci AtmVcIdentifier, hwAtmPvcQueueStatisticQueueIndex INTEGER, hwAtmPvcQueueStatisticReset INTEGER, hwAtmPvcQueueStatisticTxPks Counter64, hwAtmPvcQueueStatisticTxBytes Counter64, hwAtmPvcQueueStatisticTxDropPks Counter64 } -- 1.3.6.1.4.1.2011.5.25.156.1.27.1.1 hwAtmPvcQueueStatisticIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the interface index." ::= { hwAtmPvcQueueStatisticEntry 1 } -- 1.3.6.1.4.1.2011.5.25.156.1.27.1.2 hwAtmPvcQueueStatisticVpi OBJECT-TYPE SYNTAX AtmVpIdentifier MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the virtual path identifier (VPI) of ATM. The value is an integer. For a UNI, the value ranges from 0 to 255. For an NNI, the value ranges from 0 to 4095." ::= { hwAtmPvcQueueStatisticEntry 2 } -- 1.3.6.1.4.1.2011.5.25.156.1.27.1.3 hwAtmPvcQueueStatisticVci OBJECT-TYPE SYNTAX AtmVcIdentifier MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the virtual channel identifier (VCI) of ATM." ::= { hwAtmPvcQueueStatisticEntry 3 } -- 1.3.6.1.4.1.2011.5.25.156.1.27.1.4 hwAtmPvcQueueStatisticQueueIndex OBJECT-TYPE SYNTAX INTEGER { be(1), af1(2), af2(3), af3(4), af4(5), ef(6), cs6(7), cs7(8) } MAX-ACCESS read-only STATUS current DESCRIPTION " This object indicates the queue priority." ::= { hwAtmPvcQueueStatisticEntry 4 } -- 1.3.6.1.4.1.2011.5.25.156.1.27.1.5 hwAtmPvcQueueStatisticReset OBJECT-TYPE SYNTAX INTEGER { reset(1), ready(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates cleared statistics." ::= { hwAtmPvcQueueStatisticEntry 5 } -- 1.3.6.1.4.1.2011.5.25.156.1.27.1.6 hwAtmPvcQueueStatisticTxPks OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of sent packets." ::= { hwAtmPvcQueueStatisticEntry 6 } -- 1.3.6.1.4.1.2011.5.25.156.1.27.1.7 hwAtmPvcQueueStatisticTxBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of sent bytes." ::= { hwAtmPvcQueueStatisticEntry 7 } -- 1.3.6.1.4.1.2011.5.25.156.1.27.1.8 hwAtmPvcQueueStatisticTxDropPks OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of discarded sent packets." ::= { hwAtmPvcQueueStatisticEntry 8 } -- 1.3.6.1.4.1.2011.5.25.156.2 hwAtmNotification OBJECT IDENTIFIER ::= { hwAtmMIB 2 } -- 1.3.6.1.4.1.2011.5.25.156.2.1 hwVplTrap OBJECT IDENTIFIER ::= { hwAtmNotification 1 } -- 1.3.6.1.4.1.2011.5.25.156.2.1.1 hwAtmVpcConnectivityTestResultNotify NOTIFICATION-TYPE OBJECTS { hwAtmVpcConnectivityTestIfIndex, hwAtmVpcConnectivityTestVpi, hwAtmVpcConnectivityTestLLID, hwAtmVpcConnectivityTestResult, hwAtmVpcConnectivityTestIfName } STATUS current DESCRIPTION "This object indicates that the connectivity test on ATM VPC services is ended." ::= { hwVplTrap 1 } -- 1.3.6.1.4.1.2011.5.25.156.2.2 hwVclTrap OBJECT IDENTIFIER ::= { hwAtmNotification 2 } -- 1.3.6.1.4.1.2011.5.25.156.2.2.1 hwAtmVccConnectivityTestResultNotify NOTIFICATION-TYPE OBJECTS { hwAtmVccConnectivityTestIfIndex, hwAtmVccConnectivityTestVpi, hwAtmVccConnectivityTestVci, hwAtmVccConnectivityTestLLID, hwAtmVccConnectivityTestResult, hwAtmVccConnectivityTestIfName } STATUS current DESCRIPTION "This object indicates that the connectivity test on ATM VCC services is ended." ::= { hwVclTrap 1 } hwAtmConformance OBJECT IDENTIFIER ::= { hwAtmMIB 11 } hwAtmCompliances OBJECT IDENTIFIER ::= { hwAtmConformance 1 } hwAtmCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for systems supporting the HUAWEI-ATM-MIB." MODULE MANDATORY-GROUPS { hwAtmObjectGroup, hwAtmMapPvpObjectGroup, hwAtmMapPvcObjectGroup, hwAtmPvcIpoaObjectGroup, hwAtmPvcBridgeObjectGroup, hwAtmPvcServiceObjectGroup, hwAtmPvcOAMLoopbackObjectGroup, hwAtmPvpLimitObjectGroup, hwAtmPvcDynamicObjectGroup, hwAtmPvcDynamicPppObjectGroup, hwAtmPvcDynamicBridgeObjectGroup } ::= { hwAtmCompliances 1 } hwAtmGroups OBJECT IDENTIFIER ::= { hwAtmConformance 2 } hwAtmObjectGroup OBJECT-GROUP OBJECTS { hwAtmIfType, hwAtmClock, hwAtmFrameFormat, hwAtmScramble, hwAtmLoopback, hwAtmPitp, hwAtmFlagJ0Mode, hwAtmFlagJ0Value, hwAtmFlagJ0Trace, hwAtmFlagJ1Mode, hwAtmFlagJ1Value, hwAtmFlagJ1Trace, hwAtmFlagC2Value } STATUS current DESCRIPTION "The Atm attribute group." ::= { hwAtmGroups 1 } hwAtmIfConf OBJECT-GROUP OBJECTS { hwAtmIfConfMaxVccs, hwAtmIfConfOperVccs, hwAtmIfConfIntfType, hwAtmIfConfCellTransfer } STATUS current DESCRIPTION "Description." ::= { hwAtmGroups 2 } hwAtmVplObjectGroup OBJECT-GROUP OBJECTS { hwAtmPvcBridgeDstIfIndex, hwAtmPvcBridgeRowStatus, hwAtmPvcPppDstIfIndex, hwAtmPvcPppRowStatus } STATUS current DESCRIPTION "The ATM PVC bridge attribute group." ::= { hwAtmGroups 3 } hwAtmVclObjectGroup OBJECT-GROUP OBJECTS { hwAtmVclName, hwAtmVccAal5EncapsType, hwAtmVclRowStatus, hwAtmVclDescr } STATUS current DESCRIPTION "Description." ::= { hwAtmGroups 4 } hwAtmMapPvpObjectGroup OBJECT-GROUP OBJECTS { hwAtmMapPvpRemoteVplVpi, hwAtmMapPvpBi, hwAtmMapPvpRowStatus } STATUS current DESCRIPTION "The ATM map PVP attribute group." ::= { hwAtmGroups 5 } hwAtmMapPvcObjectGroup OBJECT-GROUP OBJECTS { hwAtmMapPvcRemoteVclVpi, hwAtmMapPvcRemoteVclVci, hwAtmMapPvcBi, hwAtmMapPvcRowStatus } STATUS current DESCRIPTION "The ATM map PVC attribute group." ::= { hwAtmGroups 6 } hwAtmServiceObjectGroup OBJECT-GROUP OBJECTS { hwAtmServiceType, hwAtmServiceOutputPcr, hwAtmServiceOutputScr, hwAtmServiceOutputMbs, hwAtmServiceCbrCdvtValue, hwAtmServiceOutputMcr, hwAtmServiceRowStatus } STATUS current DESCRIPTION "The ATM service attribute group." ::= { hwAtmGroups 7 } hwAtmPvcServiceObjectGroup OBJECT-GROUP OBJECTS { hwAtmPvcServiceName, hwAtmPvcTransmittalDirection, hwAtmPvcServiceRowStatus } STATUS current DESCRIPTION "The ATM PVC service attribute group." ::= { hwAtmGroups 8 } hwAtmPvcIpoaObjectGroup OBJECT-GROUP OBJECTS { hwAtmPvcIpoaIpMask, hwAtmPvcIpoaInarpInterval, hwAtmPvcIpoaBroadcast, hwAtmPvcIpoaRowStatus } STATUS current DESCRIPTION "The ATM PVC IPOA attribute group." ::= { hwAtmGroups 9 } hwAtmPvcBridgeObjectGroup OBJECT-GROUP OBJECTS { hwAtmVplRowStatus } STATUS current DESCRIPTION "The ATM Pvl attribute group." ::= { hwAtmGroups 10 } hwAtmPvcOAMLoopbackObjectGroup OBJECT-GROUP OBJECTS { hwAtmPvcOAMLoopbackFrequency, hwAtmPvcOAMLoopbackUpCount, hwAtmPvcOAMLoopbackDownCount, hwAtmPvcOAMLoopbackRetryFrequency, hwAtmPvcOAMLoopbackRowStatus } STATUS current DESCRIPTION "The port attribute group." ::= { hwAtmGroups 11 } hwAtmPvpLimitObjectGroup OBJECT-GROUP OBJECTS { hwAtmPvpLimitPeakRate, hwAtmPvpLimitRowStatus } STATUS current DESCRIPTION "The port attribute group." ::= { hwAtmGroups 12 } hwAtmPvcDynamicObjectGroup OBJECT-GROUP OBJECTS { hwAtmPvcDynamicAdminStatus, hwAtmPvcDynamicAal5EncapsType, hwAtmPvcDynamicRowStatus } STATUS current DESCRIPTION "The ATM any other PVC attribute group." ::= { hwAtmGroups 13 } hwAtmPvcDynamicPppObjectGroup OBJECT-GROUP OBJECTS { hwAtmPvcDynamicPppDstIfIndex, hwAtmPvcDynamicPppRowStatus } STATUS current DESCRIPTION "The ATM any other map PPP attribute group." ::= { hwAtmGroups 14 } hwAtmPvcDynamicBridgeObjectGroup OBJECT-GROUP OBJECTS { hwAtmPvcDynamicBridgeDstIfIndex, hwAtmPvcDynamicBridgeRowStatus } STATUS current DESCRIPTION "The ATM any other map bridge attribute group." ::= { hwAtmGroups 15 } hwAtmVpcVccConnectivityTestTrapGroup NOTIFICATION-GROUP NOTIFICATIONS { hwAtmVpcConnectivityTestResultNotify, hwAtmVccConnectivityTestResultNotify } STATUS current DESCRIPTION "Description." ::= { hwAtmGroups 16 } hwAtmVpVcTrapGroup NOTIFICATION-GROUP NOTIFICATIONS { hwVpAis, hwVpAisResume, hwVpRdi, hwVpRdiResume, hwVcAis, hwVcAisResume, hwVcRdi, hwVcRdiResume, hwVpLoc, hwVpLocResume, hwVcLoc, hwVcLocResume, hwNoAtmResourceAlarmTrap } STATUS current DESCRIPTION "Description." ::= { hwAtmGroups 17 } hwAtmAlarmObjectGroup OBJECT-GROUP OBJECTS { hwOamAlmDirection } STATUS current DESCRIPTION "Description." ::= { hwAtmGroups 18 } hwAtmTraps OBJECT IDENTIFIER ::= { hwAtmMIB 12 } hwVpAis NOTIFICATION-TYPE OBJECTS { hwAtmVplIfIndex, hwAtmVplVpi, hwOamAlmDirection, ifName } STATUS current DESCRIPTION "The AIS alarm of the VP is found." ::= { hwAtmTraps 1 } hwVpAisResume NOTIFICATION-TYPE OBJECTS { hwAtmVplIfIndex, hwAtmVplVpi, hwOamAlmDirection, ifName } STATUS current DESCRIPTION "The AIS alarm of the VP is cancelled." ::= { hwAtmTraps 2 } hwVpRdi NOTIFICATION-TYPE OBJECTS { hwAtmVplIfIndex, hwAtmVplVpi, hwOamAlmDirection, ifName } STATUS current DESCRIPTION "The RDI alarm of the VP is found." ::= { hwAtmTraps 3 } hwVpRdiResume NOTIFICATION-TYPE OBJECTS { hwAtmVplIfIndex, hwAtmVplVpi, hwOamAlmDirection, ifName } STATUS current DESCRIPTION "The RDI alarm of the VP is cancelled." ::= { hwAtmTraps 4 } hwVcAis NOTIFICATION-TYPE OBJECTS { hwAtmVclIfIndex, hwAtmVclVpi, hwAtmVclVci, hwOamAlmDirection, ifName } STATUS current DESCRIPTION "The AIS alarm of the VC is found." ::= { hwAtmTraps 5 } hwVcAisResume NOTIFICATION-TYPE OBJECTS { hwAtmVclIfIndex, hwAtmVclVpi, hwAtmVclVci, hwOamAlmDirection, ifName } STATUS current DESCRIPTION "The AIS alarm of the VC is cancelled." ::= { hwAtmTraps 6 } hwVcRdi NOTIFICATION-TYPE OBJECTS { hwAtmVclIfIndex, hwAtmVclVpi, hwAtmVclVci, hwOamAlmDirection, ifName } STATUS current DESCRIPTION "The RDI alarm of the VC is found." ::= { hwAtmTraps 7 } hwVcRdiResume NOTIFICATION-TYPE OBJECTS { hwAtmVclIfIndex, hwAtmVclVpi, hwAtmVclVci, hwOamAlmDirection, ifName } STATUS current DESCRIPTION "The RDI alarm of the VC is cancelled." ::= { hwAtmTraps 8 } hwVpLoc NOTIFICATION-TYPE OBJECTS { hwAtmVplIfIndex, hwAtmVplVpi, hwOamAlmDirection, ifName } STATUS current DESCRIPTION "The CC-LOC alarm of the VP is found." ::= { hwAtmTraps 9 } hwVpLocResume NOTIFICATION-TYPE OBJECTS { hwAtmVplIfIndex, hwAtmVplVpi, hwOamAlmDirection, ifName } STATUS current DESCRIPTION "The CC-LOC alarm of the VP is cancelled." ::= { hwAtmTraps 10 } hwVcLoc NOTIFICATION-TYPE OBJECTS { hwAtmVclIfIndex, hwAtmVclVpi, hwAtmVclVci, hwOamAlmDirection, ifName } STATUS current DESCRIPTION "The CC-LOC alarm of the VC is found." ::= { hwAtmTraps 11 } hwVcLocResume NOTIFICATION-TYPE OBJECTS { hwAtmVclIfIndex, hwAtmVclVpi, hwAtmVclVci, hwOamAlmDirection, ifName } STATUS current DESCRIPTION "The CC-LOC alarm of the VC is cancelled." ::= { hwAtmTraps 12 } hwNoAtmResourceAlarmTrap NOTIFICATION-TYPE OBJECTS { hwFrameIndex, hwSlotIndex, hwPortIndex } STATUS current DESCRIPTION "When ATM resources of the system are insufficient, this trap will be generated." ::= { hwAtmTraps 13 } hwOamAlmDirection OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The direction of alarm such as ais, rdi, cc-loc, the value of directon is forward or backward." ::= { hwAtmMIB 13 } END -- -- HUAWEI-ATM-MIB.mib --