-- -- HUAWEI-AR-SERIAL-CONNECT-MIB.mib -- MIB generated by MG-SOFT Visual MIB Builder Version 4.0 Build 341 -- Tuesday, December 09, 2014 at 16:31:27 -- -- ================================================================== -- Copyright (C) 2018 by HUAWEI TECHNOLOGIES. All rights reserved. -- -- Description: This MIB module defines MIB objects of hwGpioTable, hwTransportSessionTable, hwTransSessionOperateTable, -- hwSocketTransTable, hwModbusTransTable and hwGpioTraps. -- Reference: -- Version: V1.02 -- History: -- V1.0 2007-10-21 publish -- ================================================================== HUAWEI-AR-SERIAL-CONNECT-MIB DEFINITIONS ::= BEGIN IMPORTS hwDatacomm FROM HUAWEI-MIB OBJECT-GROUP, MODULE-COMPLIANCE, NOTIFICATION-GROUP FROM SNMPv2-CONF IpAddress, Integer32, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE FROM SNMPv2-SMI DateAndTime, RowStatus FROM SNMPv2-TC; -- FROM SNMPv2-SMI; -- DisplayString,TruthValue,RowStatus -- FROM SNMPv2-TC; -- EnabledStatus -- 1.3.6.1.4.1.2011.5.25.338 -- November 21, 2014 at 11:39 GMT -- 1.3.6.1.4.1.2011.5.25.338 hwARSerialConnectMIB MODULE-IDENTITY LAST-UPDATED "201804131139Z" -- April 13, 2018 at 11:39 GMT ORGANIZATION "Huawei Technologies Co.,Ltd." CONTACT-INFO "Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China Website: http://www.huawei.com Email: support@huawei.com " DESCRIPTION "The private mib file includes the general extent information of the device.hwDatacomm(338).hwARSerialConnectMIB" REVISION "201804131139Z" DESCRIPTION "V1.02, Add trap node hwGpioDIFailure hwGpioDIRecovery" REVISION "201411211139Z" DESCRIPTION "Create hwARSerialConnectMIB at 2014-11-21" ::= { hwDatacomm 338 } -- -- Node definitions -- -- Node definitions -- -- 1.3.6.1.4.1.2011.5.25.338.1 hwARSerialConnectMIBObjects OBJECT IDENTIFIER ::= { hwARSerialConnectMIB 1 } -- hwGpioTable Table -- -- 1.3.6.1.4.1.2011.5.25.338.1.1 hwGpioTable OBJECT-TYPE SYNTAX SEQUENCE OF HwGpioEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the functions of GPIO port. This table lists the base setting information of GPIO port to realize the function of DI/DO." ::= { hwARSerialConnectMIBObjects 1 } -- 1.3.6.1.4.1.2011.5.25.338.1.1.1 hwGpioEntry OBJECT-TYPE SYNTAX HwGpioEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the functions of GPIO port. This table lists the base setting information of GPIO port to realize the function of DI/DO." INDEX { hwGpioId } ::= { hwGpioTable 1 } HwGpioEntry ::= SEQUENCE { hwGpioId Integer32, hwGpioMode INTEGER, hwGpioDOLevel INTEGER, hwGpioDIState INTEGER, hwGpioDODefaultLevel INTEGER, hwGpioDIFailReason INTEGER } -- 1.3.6.1.4.1.2011.5.25.338.1.1.1.1 hwGpioId OBJECT-TYPE SYNTAX Integer32 (1..6) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates current used GPIO id on the device ." ::= { hwGpioEntry 1 } -- 1.3.6.1.4.1.2011.5.25.338.1.1.1.2 hwGpioMode OBJECT-TYPE SYNTAX INTEGER { di(0), do(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the GPIO work mode,the default value is di." DEFVAL { di } ::= { hwGpioEntry 2 } -- 1.3.6.1.4.1.2011.5.25.338.1.1.1.3 hwGpioDOLevel OBJECT-TYPE SYNTAX INTEGER { low(0), high(1), null(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the current level of DO mode.When the current GPIOID is in DI mode,the value is null." DEFVAL { null } ::= { hwGpioEntry 3 } -- 1.3.6.1.4.1.2011.5.25.338.1.1.1.4 hwGpioDIState OBJECT-TYPE SYNTAX INTEGER { low(0), high(1), null(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the current state of DI mode.When the current GPIOID is in DO mode,the value is null." DEFVAL { null } ::= { hwGpioEntry 4 } -- 1.3.6.1.4.1.2011.5.25.338.1.1.1.5 hwGpioDODefaultLevel OBJECT-TYPE SYNTAX INTEGER { low(0), high(1), null(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the default state of DO mode.When the current GPIOID is in DI mode,the value is null." DEFVAL { high } ::= { hwGpioEntry 5 } -- 1.3.6.1.4.1.2011.5.25.338.1.1.1.6 hwGpioDIFailReason OBJECT-TYPE SYNTAX INTEGER { null(0), acfailure(1), batterylow(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the default FailReason of DI." DEFVAL { high } ::= { hwGpioEntry 6 } -- hwTransportSessionTable Table -- -- 1.3.6.1.4.1.2011.5.25.338.1.2 hwTransportSessionTable OBJECT-TYPE SYNTAX SEQUENCE OF HwTransportSessionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the business of serial transportation.This table lists the session information of the serial." ::= { hwARSerialConnectMIBObjects 2 } -- 1.3.6.1.4.1.2011.5.25.338.1.2.1 hwTransportSessionEntry OBJECT-TYPE SYNTAX HwTransportSessionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the business of serial transportation. This table lists the session information of the remote serial." INDEX { hwTtyId } ::= { hwTransportSessionTable 1 } HwTransportSessionEntry ::= SEQUENCE { hwTtyId Integer32, hwTransportMode INTEGER, hwTransportRemoteIP IpAddress, hwTransportRemotePort Integer32, hwConnectDuration OCTET STRING, hwBytesReceived Integer32, hwBytesSend Integer32, hwConnectionNum Integer32, hwRefuseConnectionNum Integer32, hwMsgStatics Integer32 } -- 1.3.6.1.4.1.2011.5.25.338.1.2.1.1 hwTtyId OBJECT-TYPE SYNTAX Integer32 (1..2) MAX-ACCESS read-only STATUS current DESCRIPTION "Inicates the current tty index ." ::= { hwTransportSessionEntry 1 } -- 1.3.6.1.4.1.2011.5.25.338.1.2.1.2 hwTransportMode OBJECT-TYPE SYNTAX INTEGER { none(0), raw(1), t101(2), modbus(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the current used mode of transparent.During mode switching, if the current communication parameter configuration is not the default configuration ,the mode switching is not allowed." ::= { hwTransportSessionEntry 2 } -- 1.3.6.1.4.1.2011.5.25.338.1.2.1.3 hwTransportRemoteIP OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the remote IP." ::= { hwTransportSessionEntry 3 } -- 1.3.6.1.4.1.2011.5.25.338.1.2.1.4 hwTransportRemotePort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the remote port." ::= { hwTransportSessionEntry 4 } -- 1.3.6.1.4.1.2011.5.25.338.1.2.1.5 hwConnectDuration OBJECT-TYPE SYNTAX OCTET STRING(SIZE (0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the time when the connection begins." ::= { hwTransportSessionEntry 5 } -- 1.3.6.1.4.1.2011.5.25.338.1.2.1.6 hwBytesReceived OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Statistics the number of packets received on current connection." ::= { hwTransportSessionEntry 6 } -- 1.3.6.1.4.1.2011.5.25.338.1.2.1.7 hwBytesSend OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Statistics the number of packets sent on current connection." ::= { hwTransportSessionEntry 7 } -- 1.3.6.1.4.1.2011.5.25.338.1.2.1.8 hwConnectionNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Statistics the number of connection on current serial." ::= { hwTransportSessionEntry 8 } -- 1.3.6.1.4.1.2011.5.25.338.1.2.1.9 hwRefuseConnectionNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Statistics the number of refuseing connection on current serial." ::= { hwTransportSessionEntry 9 } -- 1.3.6.1.4.1.2011.5.25.338.1.2.1.10 hwMsgStatics OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Statistics the number of transmitted and received packets on current connection." ::= { hwTransportSessionEntry 10 } -- hwTransSessionOperateTable Table -- -- 1.3.6.1.4.1.2011.5.25.338.1.3 hwTransSessionOperateTable OBJECT-TYPE SYNTAX SEQUENCE OF HwTransSessionOperateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the business of serial transportation. This table lists the session information of the serial." ::= { hwARSerialConnectMIBObjects 3 } -- 1.3.6.1.4.1.2011.5.25.338.1.3.1 hwTransSessionOperateEntry OBJECT-TYPE SYNTAX HwTransSessionOperateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the business of serial transportation. This table lists the session information of the remote serial." INDEX { hwTtyId, hwSessionIndex } ::= { hwTransSessionOperateTable 1 } HwTransSessionOperateEntry ::= SEQUENCE { hwSessionIndex Integer32, hwTransSessionSessionID Integer32, hwTransSessionRowStatus RowStatus } -- 1.3.6.1.4.1.2011.5.25.338.1.3.1.1 hwSessionIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Inicates the connection session id ." ::= { hwTransSessionOperateEntry 1 } -- 1.3.6.1.4.1.2011.5.25.338.1.3.1.2 hwTransSessionSessionID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the current used connection session id." ::= { hwTransSessionOperateEntry 2 } -- 1.3.6.1.4.1.2011.5.25.338.1.3.1.3 hwTransSessionRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This project used to create and delete a connection." ::= { hwTransSessionOperateEntry 3 } -- hwSocketTransTable Table -- -- 1.3.6.1.4.1.2011.5.25.338.1.4 hwSocketTransTable OBJECT-TYPE SYNTAX SEQUENCE OF HwSocketTransEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the socket information. This table lists the base communication of tcp/udp on serial socket." ::= { hwARSerialConnectMIBObjects 4 } -- 1.3.6.1.4.1.2011.5.25.338.1.4.1 hwSocketTransEntry OBJECT-TYPE SYNTAX HwSocketTransEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the socket information. This table lists the base communication of tcp/udp on serial socket." INDEX { hwTtyId } ::= { hwSocketTransTable 1 } HwSocketTransEntry ::= SEQUENCE { hwSocketTransEnable INTEGER, hwSocketTransType INTEGER, hwSocketTransPacketSize Integer32, hwSocketTransPacketTime Integer32, hwSocketTransSpecialChar Integer32, hwSocketTransClientIP IpAddress, hwSocketTransClientPort Integer32, hwSocketTransServerIP IpAddress, hwSocketTransServerPort Integer32, hwSocketTransTcpIdleTimeout Integer32, hwSocketTransBestEffort INTEGER, hwRawModeSocketTransEnable INTEGER } -- 1.3.6.1.4.1.2011.5.25.338.1.4.1.1 hwSocketTransEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "When current TTY ID is 1,this object used to switch the serial back and forth from management serial to bussiness serial. TTY 2 is a bussiness serial,no need to switch." DEFVAL { disable } ::= { hwSocketTransEntry 1 } -- 1.3.6.1.4.1.2011.5.25.338.1.4.1.2 hwSocketTransType OBJECT-TYPE SYNTAX INTEGER { tcpServer(0), tcpClient(1), udp(2), null(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Used to set or get the type used to transport.The default value is null(3), meaning current serial is not configured for any operating mode." ::= { hwSocketTransEntry 2 } -- 1.3.6.1.4.1.2011.5.25.338.1.4.1.3 hwSocketTransPacketSize OBJECT-TYPE SYNTAX Integer32 (0..1400) MAX-ACCESS read-write STATUS current DESCRIPTION "Used to set or get max size of trans packets.The setting range is 16 - 1400.0 is default value." ::= { hwSocketTransEntry 3 } -- 1.3.6.1.4.1.2011.5.25.338.1.4.1.4 hwSocketTransPacketTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the packet encapsulation timer,the default value is 100ms,parameter units is ms." DEFVAL { 100 } ::= { hwSocketTransEntry 4 } -- 1.3.6.1.4.1.2011.5.25.338.1.4.1.5 hwSocketTransSpecialChar OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the byte of special characters used to specifie a packet end." ::= { hwSocketTransEntry 5 } -- 1.3.6.1.4.1.2011.5.25.338.1.4.1.6 hwSocketTransClientIP OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Indicate the client IP when the serial is worked in tcp server, this project can also be the client local IP when the serial is worked in tcp client or udp client." ::= { hwSocketTransEntry 6 } -- 1.3.6.1.4.1.2011.5.25.338.1.4.1.7 hwSocketTransClientPort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Indicate the client port when the serial is worked in tcp server, this project can also be the client local port when the serial is worked in tcp client or udp client." ::= { hwSocketTransEntry 7 } -- 1.3.6.1.4.1.2011.5.25.338.1.4.1.8 hwSocketTransServerIP OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Indicate the local server ip when the serial is worked in tcp server, this project can also be the server ip when the serial is worked in tcp client or udp client." ::= { hwSocketTransEntry 8 } -- 1.3.6.1.4.1.2011.5.25.338.1.4.1.9 hwSocketTransServerPort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Indicate the local listening server port when the serial is worked in tcp server, this project can also be the server port when the serial is worked in tcp client or udp client" ::= { hwSocketTransEntry 9 } -- 1.3.6.1.4.1.2011.5.25.338.1.4.1.10 hwSocketTransTcpIdleTimeout OBJECT-TYPE SYNTAX Integer32 (0..60) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the interval time of the tcp link keep alive." ::= { hwSocketTransEntry 10 } -- 1.3.6.1.4.1.2011.5.25.338.1.4.1.11 hwSocketTransBestEffort OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "When configuring a best effort mode, discarding older data cache first, otherwise discard newer data buffer." ::= { hwSocketTransEntry 11 } hwRawModeSocketTransEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Used to enable or disable the transport business on serial.When the transport business is enable,do not allowed to set socket param." DEFVAL { disable } ::= { hwSocketTransEntry 12 } -- hwModbusTransTable Table -- -- 1.3.6.1.4.1.2011.5.25.338.1.5 hwModbusTransTable OBJECT-TYPE SYNTAX SEQUENCE OF HwModbusTransEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the attribute of the conntection info of modbus. This table lists the connection info of the modbus interface." ::= { hwARSerialConnectMIBObjects 5 } -- 1.3.6.1.4.1.2011.5.25.338.1.5.1 hwModbusTransEntry OBJECT-TYPE SYNTAX HwModbusTransEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the attribute of the conntection info of modbus. This table lists the connection info of the modbus interface." INDEX { hwTtyId } ::= { hwModbusTransTable 1 } HwModbusTransEntry ::= SEQUENCE { hwModbusTransEnable INTEGER, hwModbusTransServerIP IpAddress, hwModbusTransServerPort Integer32, hwModbusTransServerDestIP IpAddress, hwModbusTransServerDestPort Integer32, hwModbusTransServerFrameBufNum Integer32, hwModbusTransServerClientNum Integer32, hwModbusTransSerialTimeout Integer32 } -- 1.3.6.1.4.1.2011.5.25.338.1.5.1.1 hwModbusTransEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "The object used to enable/disable the modbus transport." ::= { hwModbusTransEntry 1 } -- 1.3.6.1.4.1.2011.5.25.338.1.5.1.2 hwModbusTransServerIP OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the Server IP of Modbus Transportation,the device as a server." ::= { hwModbusTransEntry 2 } -- 1.3.6.1.4.1.2011.5.25.338.1.5.1.3 hwModbusTransServerPort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the Server Port of Modbus Transportation,the device as a server. Modbus used port is 502 + hwModbusTransServerPort." ::= { hwModbusTransEntry 3 } -- 1.3.6.1.4.1.2011.5.25.338.1.5.1.4 hwModbusTransServerDestIP OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the remote ip addr,only this ip can connect to the modbus server." ::= { hwModbusTransEntry 4 } -- 1.3.6.1.4.1.2011.5.25.338.1.5.1.5 hwModbusTransServerDestPort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the remote port,only this port can connect to the modbus server." ::= { hwModbusTransEntry 5 } -- 1.3.6.1.4.1.2011.5.25.338.1.5.1.6 hwModbusTransServerFrameBufNum OBJECT-TYPE SYNTAX Integer32 (1..6) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the size of cache packets,the default value is 3." DEFVAL { 3 } ::= { hwModbusTransEntry 6 } -- 1.3.6.1.4.1.2011.5.25.338.1.5.1.7 hwModbusTransServerClientNum OBJECT-TYPE SYNTAX Integer32 (1..4) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the number of customers which allow to acess the server at the same time, the default value is 1." DEFVAL { 1 } ::= { hwModbusTransEntry 7 } -- 1.3.6.1.4.1.2011.5.25.338.1.5.1.8 hwModbusTransSerialTimeout OBJECT-TYPE SYNTAX Integer32 (1..10) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the waitting time ,after the master send a message to the modbus slave." DEFVAL { 1 } ::= { hwModbusTransEntry 8 } -- 1.3.6.1.4.1.2011.5.25.338.2 hwARSerialConnectMIBNotifications OBJECT IDENTIFIER ::= { hwARSerialConnectMIB 2 } -- 1.3.6.1.4.1.2011.5.25.338.2.1 hwGpioTraps OBJECT IDENTIFIER ::= { hwARSerialConnectMIBNotifications 1 } -- 1.3.6.1.4.1.2011.5.25.338.2.1.1 hwGpioDILevelChange NOTIFICATION-TYPE OBJECTS { hwGpioId, hwGpioDIState } STATUS current DESCRIPTION "The notification indicates that the current DI level has changed." ::= { hwGpioTraps 1 } -- 1.3.6.1.4.1.2011.5.25.338.2.1.2 hwGpioDIFailure NOTIFICATION-TYPE OBJECTS { hwGpioId, hwGpioDIState, hwGpioDIFailReason } STATUS current DESCRIPTION "The GPIO DI state change fail reason." ::= { hwGpioTraps 2 } -- 1.3.6.1.4.1.2011.5.25.338.2.1.3 hwGpioDIRecovery NOTIFICATION-TYPE OBJECTS { hwGpioId, hwGpioDIState, hwGpioDIFailReason } STATUS current DESCRIPTION "The GPIO DI state recovery." ::= { hwGpioTraps 3 } -- ============== conformance information ============== -- 1.3.6.1.4.1.2011.5.25.338.3 hwARSerialConnectConformance OBJECT IDENTIFIER ::= { hwARSerialConnectMIB 3 } -- 1.3.6.1.4.1.2011.5.25.338.3.1 hwSerialConnectCompliances OBJECT IDENTIFIER ::= { hwARSerialConnectConformance 1 } -- this module -- 1.3.6.1.4.1.2011.5.25.338.3.1.1 hwSerialConnectCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for systems supporting the this module." MODULE HUAWEI-AR-SERIAL-CONNECT-MIB MANDATORY-GROUPS { hwGpioGroup, hwTransportSesionGroup, hwSocketTransGroup, hwGpioTrapsGroup, hwTransSessionOperateGroup, hwModbusTransGroup} ::= { hwSerialConnectCompliances 1 } -- ============== groups ============== -- 1.3.6.1.4.1.2011.5.25.338.3.2 hwSerialConnectGroups OBJECT IDENTIFIER ::= { hwARSerialConnectConformance 2 } -- 1.3.6.1.4.1.2011.5.25.338.3.2.1 hwGpioGroup OBJECT-GROUP OBJECTS { hwGpioId, hwGpioMode, hwGpioDOLevel, hwGpioDIState, hwGpioDODefaultLevel } STATUS current DESCRIPTION "The GPIO group." ::= { hwSerialConnectGroups 1 } -- 1.3.6.1.4.1.2011.5.25.338.3.2.2 hwTransportSesionGroup OBJECT-GROUP OBJECTS { hwTtyId, hwTransportMode, hwTransportRemoteIP, hwTransportRemotePort, hwConnectDuration, hwBytesReceived, hwBytesSend, hwConnectionNum, hwRefuseConnectionNum, hwMsgStatics } STATUS current DESCRIPTION "The TransportSesion group." ::= { hwSerialConnectGroups 2 } -- 1.3.6.1.4.1.2011.5.25.338.3.2.3 hwTransSessionOperateGroup OBJECT-GROUP OBJECTS { hwTransSessionSessionID, hwTransSessionRowStatus, hwSessionIndex } STATUS current DESCRIPTION "The TransportStatics group." ::= { hwSerialConnectGroups 3 } -- 1.3.6.1.4.1.2011.5.25.338.3.2.4 hwSocketTransGroup OBJECT-GROUP OBJECTS { hwSocketTransEnable, hwSocketTransType, hwSocketTransPacketSize, hwSocketTransPacketTime, hwSocketTransSpecialChar, hwSocketTransBestEffort, hwSocketTransTcpIdleTimeout, hwSocketTransClientIP, hwSocketTransClientPort, hwSocketTransServerIP, hwSocketTransServerPort,hwRawModeSocketTransEnable } STATUS current DESCRIPTION "The SocketTrans group." ::= { hwSerialConnectGroups 4 } -- 1.3.6.1.4.1.2011.5.25.338.3.2.5 hwModbusTransGroup OBJECT-GROUP OBJECTS { hwModbusTransEnable, hwModbusTransServerIP, hwModbusTransServerPort, hwModbusTransServerDestIP, hwModbusTransServerDestPort, hwModbusTransServerFrameBufNum, hwModbusTransServerClientNum, hwModbusTransSerialTimeout } STATUS current DESCRIPTION "The SPR Service group." ::= { hwSerialConnectGroups 5 } -- 1.3.6.1.4.1.2011.5.25.338.3.2.6 hwGpioTrapsGroup NOTIFICATION-GROUP NOTIFICATIONS { hwGpioDILevelChange } STATUS current DESCRIPTION "The GpioTraps group." ::= { hwSerialConnectGroups 6 } END -- -- HUAWEI-AR-SERIAL-CONNECT-MIB.mib --