-- ============================================================================ -- Copyright (C) 2010 by HUAWEI TECHNOLOGIES. All rights reserved. -- Description: This MIB is used for defining Huawei's ADSLNNI management MIB objects. -- Reference: -- Version: V1.04 -- ============================================================================ HUAWEI-ADSLNNI-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, NOTIFICATION-TYPE, Integer32, Counter32 FROM SNMPv2-SMI ifIndex FROM IF-MIB hwFrameIndex, hwSlotIndex FROM HUAWEI-DEVICE-MIB HCPerfTimeElapsed FROM HC-PerfHist-TC-MIB -- [RFC3705] Adsl2Unit, Adsl2TransmissionModeType, Adsl2Direction, Adsl2PowerMngState, Adsl2InitResult, Adsl2Tssi, Adsl2LastTransmittedState, Adsl2LineStatus, Adsl2ChAtmStatus, Adsl2ChPtmStatus FROM ADSL2-LINE-TC-MIB huaweiUtility FROM HUAWEI-MIB; hwAdslnniMIB MODULE-IDENTITY LAST-UPDATED "201207200000Z" ORGANIZATION "Huawei Technologies Co.,Ltd." CONTACT-INFO "Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China Website: http://www.huawei.com Email: support@huawei.com " DESCRIPTION "This MIB is used for defining Huawei's ADSLNNI management MIB objects." -- Revision history REVISION "201207200000Z" DESCRIPTION "V1.04, delete unnecessary en dashes." REVISION "201009270000Z" DESCRIPTION "V1.03, modify the description of the whole MIB file." REVISION "201009070000Z" DESCRIPTION "V1.02, Modify for MIB standardization." REVISION "200911120000Z" DESCRIPTION "V1.01, Add MIB for ADSLNNI." REVISION "200911040000Z" DESCRIPTION "V1.00, Initial version." ::= { huaweiUtility 143 } hwAdslnni OBJECT IDENTIFIER ::= { hwAdslnniMIB 1 } hwAdslnniCfg OBJECT IDENTIFIER ::= { hwAdslnni 1 } hwAdslnniStatistics OBJECT IDENTIFIER ::= { hwAdslnni 2 } hwAdslnniPerStatis OBJECT IDENTIFIER ::= { hwAdslnni 3 } hwAdslnniPMLine OBJECT IDENTIFIER ::= { hwAdslnniPerStatis 1 } hwAdslnniPMChannel OBJECT IDENTIFIER ::= { hwAdslnniPerStatis 2 } -- AdslnniCfg hwAdslnniPvcCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF HwAdslnniPvcCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table hwAdslnniPvcCfgTable config the PVC of ADSLNNI is used to set and query the ADSL upstream VPI/VCI. This table is used for the bonding group instead of the ADSL port. Each bonding group corresponds to one PVC and the PVC takes effect only in the ATM bonding mode. The index of this table is ifIndex. " ::= { hwAdslnniCfg 1 } hwAdslnniPvcCfgEntry OBJECT-TYPE SYNTAX HwAdslnniPvcCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table hwAdslnniPvcCfgTable config the PVC of ADSLNNI is used to set and query the ADSL upstream VPI/VCI. This table is used for the bonding group instead of the ADSL port. Each bonding group corresponds to one PVC and the PVC takes effect only in the ATM bonding mode. The index of this entry is ifIndex. " INDEX { ifIndex } ::= { hwAdslnniPvcCfgTable 1 } HwAdslnniPvcCfgEntry ::= SEQUENCE { hwAdslnniPvcVpi Integer32, hwAdslnniPvcVci Integer32 } hwAdslnniPvcVpi OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The VPI of the adslnni port." DEFVAL { 0 } ::= { hwAdslnniPvcCfgEntry 1 } hwAdslnniPvcVci OBJECT-TYPE SYNTAX Integer32(32..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The VCI of the adslnni port." DEFVAL { 35 } ::= { hwAdslnniPvcCfgEntry 2 } hwAdslnniInventoryTable OBJECT-TYPE SYNTAX SEQUENCE OF HwAdslnniInventoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table hwAdslnniInventoryTable contains inventory of the ADSL2 units. The indexes of this table are ifIndex and hwAdslnniLInvUnit. " ::= { hwAdslnniCfg 2 } hwAdslnniInventoryEntry OBJECT-TYPE SYNTAX HwAdslnniInventoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table hwAdslnniInventoryTable contains inventory of the ADSL2 units. The indexes of this entry are ifIndex and hwAdslnniLInvUnit. " INDEX { ifIndex, hwAdslnniLInvUnit } ::= { hwAdslnniInventoryTable 1 } HwAdslnniInventoryEntry ::= SEQUENCE { hwAdslnniLInvUnit Adsl2Unit, hwAdslnniLInvG994VendorId OCTET STRING, hwAdslnniLInvSystemVendorId OCTET STRING, hwAdslnniLInvVersionNumber OCTET STRING, hwAdslnniLInvSerialNumber OCTET STRING, hwAdslnniLInvSelfTestResult Unsigned32, hwAdslnniLInvTransmissionCapabilities Adsl2TransmissionModeType } hwAdslnniLInvUnit OBJECT-TYPE SYNTAX Adsl2Unit MAX-ACCESS not-accessible STATUS current DESCRIPTION "The termination unit atuc(1) or atur(2)." ::= { hwAdslnniInventoryEntry 1 } hwAdslnniLInvG994VendorId OBJECT-TYPE SYNTAX OCTET STRING (SIZE(8)) MAX-ACCESS read-only STATUS current DESCRIPTION "The ATU G.994.1 Vendor ID as inserted in the G.994.1 CL/CLR message. It consists of 8 binary octets, including a country code followed by a (regionally allocated) provider code, as defined in Recommendation T.35. " REFERENCE "ITU-T G.997.1, paragraph 7.4" ::= { hwAdslnniInventoryEntry 2 } hwAdslnniLInvSystemVendorId OBJECT-TYPE SYNTAX OCTET STRING (SIZE(8)) MAX-ACCESS read-only STATUS current DESCRIPTION "The ATU System Vendor ID (identifies the ATU system integrator) as inserted in the Overhead Messages (both ATUs for G.992.3 and G.992.4) or in the Embedded Operations Channel (only ATU-R in G.992.1 and G.992.2). It consists of 8 binary octets, with the same format as used for Adsl2InvG994VendorId. " REFERENCE "ITU-T G.997.1, paragraph 7.4" ::= { hwAdslnniInventoryEntry 3 } hwAdslnniLInvVersionNumber OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The ATU version number (vendor-specific information) as inserted in the Overhead Messages (both ATUs for G.992.3 and G.992.4) or in the Embedded Operations Channel (only ATU-R in G.992.1 and G.992.2). It consists of up to 16 binary octets. " REFERENCE "ITU-T G.997.1, paragraph 7.4" ::= { hwAdslnniInventoryEntry 4 } hwAdslnniLInvSerialNumber OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The ATU serial number (vendor-specific information) as inserted in the Overhead Messages (both ATUs for G.992.3 and G.992.4) or in the Embedded Operations Channel (only ATU-R in G.992.1 and G.992.2). It is vendor-specific information. It consists of up to 32 ASCII characters. " REFERENCE "ITU-T G.997.1, paragraph 7.4" ::= { hwAdslnniInventoryEntry 5 } hwAdslnniLInvSelfTestResult OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The ATU self-test result, coded as a 32-bit value. The most significant octet of the result is '0' if the self-test passed, and '1' if the self-test failed. The interpretation of the other octets is vendor discretionary. " REFERENCE "ITU-T G.997.1, paragraph 7.4" ::= { hwAdslnniInventoryEntry 6 } hwAdslnniLInvTransmissionCapabilities OBJECT-TYPE SYNTAX Adsl2TransmissionModeType MAX-ACCESS read-only STATUS current DESCRIPTION "The ATU transmission system capability list of the different coding types. It is coded in a bit-map representation with 1 or more bits set. A bit set to '1' means that the ATU supports the respective coding. The value may be derived from the handshaking procedures defined in G.994.1. A set of ADSL2 line transmission modes, with one bit per mode. " REFERENCE "ITU-T G.997.1, paragraph 7.4" ::= { hwAdslnniInventoryEntry 7 } hwAdslnniLineTable OBJECT-TYPE SYNTAX SEQUENCE OF HwAdslnniLineEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table hwAdslnniLineTable contains configuration, commands, and status parameters of the ADSL2 line. The index of this table is an interface index where the interface has an ifType of adslnni. " ::= { hwAdslnniCfg 3 } hwAdslnniLineEntry OBJECT-TYPE SYNTAX HwAdslnniLineEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table hwAdslnniLineTable contains configuration, commands, and status parameters of the ADSL2 line. The index of this entry is an interface index where the interface has an ifType of adslnni. " INDEX { ifIndex } ::= { hwAdslnniLineTable 1 } HwAdslnniLineEntry ::= SEQUENCE { hwAdslnniLineStatusAtuTransSys Adsl2TransmissionModeType, hwAdslnniLineStatusPwrMngState Adsl2PowerMngState, hwAdslnniLineStatusInitResult Adsl2InitResult, hwAdslnniLineStatusLastStateDs Adsl2LastTransmittedState, hwAdslnniLineStatusLastStateUs Adsl2LastTransmittedState, hwAdslnniLineStatusAtur Adsl2LineStatus, hwAdslnniLineStatusAtuc Adsl2LineStatus, hwAdslnniLineStatusLnAttenDs Unsigned32, hwAdslnniLineStatusLnAttenUs Unsigned32, hwAdslnniLineStatusSigAttenDs Unsigned32, hwAdslnniLineStatusSigAttenUs Unsigned32, hwAdslnniLineStatusSnrMarginDs Integer32, hwAdslnniLineStatusSnrMarginUs Integer32, hwAdslnniLineStatusAttainableRateDs Unsigned32, hwAdslnniLineStatusAttainableRateUs Unsigned32, hwAdslnniLineStatusActPsdDs Integer32, hwAdslnniLineStatusActPsdUs Integer32, hwAdslnniLineStatusActAtpDs Integer32, hwAdslnniLineStatusActAtpUs Integer32 } hwAdslnniLineStatusAtuTransSys OBJECT-TYPE SYNTAX Adsl2TransmissionModeType MAX-ACCESS read-only STATUS current DESCRIPTION "The ATU Transmission System (ATS) in use. It is coded in a bit-map representation with only a single bit set to '1' (the selected coding for the ADSL line). This parameter may be derived from the handshaking procedures defined in Recommendation G.994.1. A set of ADSL2 line transmission modes, with one bit per mode. " REFERENCE "ITU-T G.997.1, paragraph 7.3.1.1.1" ::= { hwAdslnniLineEntry 1 } hwAdslnniLineStatusPwrMngState OBJECT-TYPE SYNTAX Adsl2PowerMngState MAX-ACCESS read-only STATUS current DESCRIPTION "The current power management state. Options: 1. L0(1) - Synchronized and full transmission (i.e., Showtime). 2. L1(2) - Low Power with reduced net data rate (G.992.2 only). 3. L2(3) - Low Power with reduced net data rate (G.992.3 and G.992.4 only). 4. L3(4) - No power. " REFERENCE "ITU-T G.997.1, paragraph 7.5.1.2" ::= { hwAdslnniLineEntry 2 } hwAdslnniLineStatusInitResult OBJECT-TYPE SYNTAX Adsl2InitResult MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the result of the last full initialization performed on the line. Options: 1. noFail(0) -Indicates that no abnormity occurs. 2. configError(1) -Indicates that the configuration is incorrect. 3. configNotFeasible(2) -Indicates that the configuration is improper. 4. commFail(3) -Indicates that the communication fails. 5. noPeerAtu(4) -Indicates that the peer ATU does not exist. 6. otherCause(5) -Indicates that an unknown error occurs. " REFERENCE "ITU-T G.997.1, paragraph 7.5.1.3" ::= { hwAdslnniLineEntry 3 } hwAdslnniLineStatusLastStateDs OBJECT-TYPE SYNTAX Adsl2LastTransmittedState MAX-ACCESS read-only STATUS current DESCRIPTION "The last successful transmitted initialization state in the downstream direction in the last full initialization performed on the line. " REFERENCE "ITU-T G.997.1, paragraph 7.5.1.4" ::= { hwAdslnniLineEntry 4 } hwAdslnniLineStatusLastStateUs OBJECT-TYPE SYNTAX Adsl2LastTransmittedState MAX-ACCESS read-only STATUS current DESCRIPTION "The last successful transmitted initialization state in the upstream direction in the last full initialization performed on the line. " REFERENCE "ITU-T G.997.1, paragraph 7.5.1.5" ::= { hwAdslnniLineEntry 5 } hwAdslnniLineStatusAtur OBJECT-TYPE SYNTAX Adsl2LineStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates current state (existing failures) of the ATU-R. This is a bit-map of possible conditions. " REFERENCE "ITU-T G.997.1, paragraph 7.1.1.2" ::= { hwAdslnniLineEntry 6 } hwAdslnniLineStatusAtuc OBJECT-TYPE SYNTAX Adsl2LineStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates current state (existing failures) of the ATU-C. This is a bit-map of possible conditions. " REFERENCE "ITU-T G.997.1, paragraph 7.1.1.1" ::= { hwAdslnniLineEntry 7 } hwAdslnniLineStatusLnAttenDs OBJECT-TYPE SYNTAX Unsigned32 (0..1270 | 2147483646 | 2147483647) UNITS "0.1 dB" MAX-ACCESS read-only STATUS current DESCRIPTION "The measured difference in the total power transmitted by the ATU-C and the total power received by the ATU-R over all sub- carriers during diagnostics mode and initialization. It ranges from 0 to 1270 units of 0.1 dB (physical values are 0 to 127 dB). A special value of 0x7FFFFFFF (2147483647) indicates the line attenuation is out of range to be represented. A special value of 0x7FFFFFFE (2147483646) indicates the line attenuation measurement is currently unavailable. " REFERENCE "ITU-T G.997.1, paragraph 7.5.1.6" ::= { hwAdslnniLineEntry 8 } hwAdslnniLineStatusLnAttenUs OBJECT-TYPE SYNTAX Unsigned32 (0..1270 | 2147483646 | 2147483647) UNITS "0.1 dB" MAX-ACCESS read-only STATUS current DESCRIPTION "The measured difference in the total power transmitted by the ATU-R and the total power received by the ATU-C over all sub- carriers during diagnostics mode and initialization. It ranges from 0 to 1270 units of 0.1 dB (physical values are 0 to 127 dB). A special value of 0x7FFFFFFF (2147483647) indicates the line attenuation is out of range to be represented. A special value of 0x7FFFFFFE (2147483646) indicates the line attenuation measurement is currently unavailable. " REFERENCE "ITU-T G.997.1, paragraph 7.5.1.7" ::= { hwAdslnniLineEntry 9 } hwAdslnniLineStatusSigAttenDs OBJECT-TYPE SYNTAX Unsigned32 (0..1270 | 2147483646 | 2147483647) UNITS "0.1 dB" MAX-ACCESS read-only STATUS current DESCRIPTION "The measured difference in the total power transmitted by the ATU-C and the total power received by the ATU-R over all sub- carriers during Showtime. It ranges from 0 to 1270 units of 0.1 dB (physical values are 0 to 127 dB). A special value of 0x7FFFFFFF (2147483647) indicates the signal attenuation is out of range to be represented. A special value of 0x7FFFFFFE (2147483646) indicates the signal attenuation measurement is currently unavailable. " REFERENCE "ITU-T G.997.1, paragraph 7.5.1.8" ::= { hwAdslnniLineEntry 10 } hwAdslnniLineStatusSigAttenUs OBJECT-TYPE SYNTAX Unsigned32 (0..1270 | 2147483646 | 2147483647) UNITS "0.1 dB" MAX-ACCESS read-only STATUS current DESCRIPTION "The measured difference in the total power transmitted by the ATU-R and the total power received by the ATU-C over all sub- carriers during Showtime. It ranges from 0 to 1270 units of 0.1 dB (physical values are 0 to 127 dB). A special value of 0x7FFFFFFF (2147483647) indicates the signal attenuation is out of range to be represented. A special value of 0x7FFFFFFE (2147483646) indicates the signal attenuation measurement is currently unavailable. " REFERENCE "ITU-T G.997.1, paragraph 7.5.1.9" ::= { hwAdslnniLineEntry 11 } hwAdslnniLineStatusSnrMarginDs OBJECT-TYPE SYNTAX Integer32 (-640..630 | 2147483646 | 2147483647) UNITS "0.1 dB" MAX-ACCESS read-only STATUS current DESCRIPTION "Downstream SNR Margin is the maximum increase in dB of the noise power received at the ATU-R, such that the BER requirements are met for all downstream bearer channels. It ranges from -640 to 630 units of 0.1 dB (physical values are -64 to 63 dB). A special value of 0x7FFFFFFF (2147483647) indicates the SNR Margin is out of range to be represented. A special value of 0x7FFFFFFE (2147483646) indicates the SNR Margin measurement is currently unavailable. " REFERENCE "ITU-T G.997.1, paragraph 7.5.1.10" ::= { hwAdslnniLineEntry 12 } hwAdslnniLineStatusSnrMarginUs OBJECT-TYPE SYNTAX Integer32 (-640..630 | 2147483646 | 2147483647) UNITS "0.1 dB" MAX-ACCESS read-only STATUS current DESCRIPTION "Upstream SNR Margin is the maximum increase in dB of the noise power received at the ATU-C, such that the BER requirements are met for all downstream bearer channels. It ranges from -640 to 630 units of 0.1 dB (physical values are -64 to 63 dB). A special value of 0x7FFFFFFF (2147483647) indicates the SNR Margin is out of range to be represented. A special value of 0x7FFFFFFE (2147483646) indicates the SNR Margin measurement is currently unavailable. " REFERENCE "ITU-T G.997.1, paragraph 7.5.1.11" ::= { hwAdslnniLineEntry 13 } hwAdslnniLineStatusAttainableRateDs OBJECT-TYPE SYNTAX Unsigned32 UNITS "bits/second" MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum Attainable Data Rate Downstream. The maximum downstream net data rate currently attainable by the ATU-C transmitter and the ATU-R receiver, coded in bits/second. " REFERENCE "ITU-T G.997.1, paragraph 7.5.1.12" ::= { hwAdslnniLineEntry 14 } hwAdslnniLineStatusAttainableRateUs OBJECT-TYPE SYNTAX Unsigned32 UNITS "bits/second" MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum Attainable Data Rate Upstream. The maximum upstream net data rate currently attainable by the ATU-R transmitter and the ATU-C receiver, coded in bits/second. " REFERENCE "ITU-T G.997.1, paragraph 7.5.1.13" ::= { hwAdslnniLineEntry 15 } hwAdslnniLineStatusActPsdDs OBJECT-TYPE SYNTAX Integer32 (-900..0 | 2147483647) UNITS "0.1 dB" MAX-ACCESS read-only STATUS current DESCRIPTION "Actual Power Spectrum Density (PSD) Downstream. The average downstream transmit PSD over the sub-carriers used for downstream. It ranges from -900 to 0 units of 0.1 dB (physical values are -90 to 0 dBm/Hz). A value of 0x7FFFFFFF (2147483647) indicates the measurement is out of range to be represented. " REFERENCE "ITU-T G.997.1, paragraph 7.5.1.14" ::= { hwAdslnniLineEntry 16 } hwAdslnniLineStatusActPsdUs OBJECT-TYPE SYNTAX Integer32 (-900..0 | 2147483647) UNITS "0.1 dB" MAX-ACCESS read-only STATUS current DESCRIPTION "Actual Power Spectrum Density (PSD) Upstream. The average upstream transmit PSD over the sub-carriers used for upstream. It ranges from -900 to 0 units of 0.1 dB (physical values are -90 to 0 dBm/Hz). A value of 0x7FFFFFFF (2147483647) indicates the measurement is out of range to be represented. " REFERENCE "ITU-T G.997.1, paragraph 7.5.1.15" ::= { hwAdslnniLineEntry 17 } hwAdslnniLineStatusActAtpDs OBJECT-TYPE SYNTAX Integer32 (-310..310 | 2147483647) UNITS "0.1 dB" MAX-ACCESS read-only STATUS current DESCRIPTION "Actual Aggregate Transmit Power Downstream. The total amount of transmit power delivered by the ATU-C at the U-C reference point, at the instant of measurement. It ranges from -310 to 310 units of 0.1 dB (physical values are -31 to 31 dBm). A value of 0x7FFFFFFF (2147483647) indicates the measurement is out of range to be represented. " REFERENCE "ITU-T G.997.1, paragraph 7.5.1.16" ::= { hwAdslnniLineEntry 18 } hwAdslnniLineStatusActAtpUs OBJECT-TYPE SYNTAX Integer32 (-310..310 | 2147483647) UNITS "0.1 dB" MAX-ACCESS read-only STATUS current DESCRIPTION "Actual Aggregate Transmit Power Upstream. The total amount of transmit power delivered by the ATU-R at the U-R reference point, at the instant of measurement. It ranges from -310 to 310 units of 0.1 dB (physical values are -31 to 31 dBm). A value of 0x7FFFFFFF (2147483647) indicates the measurement is out of range to be represented. " REFERENCE "ITU-T G.997.1, paragraph 7.5.1.17" ::= { hwAdslnniLineEntry 19 } hwAdslnniChannelStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF HwAdslnniChannelStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table hwAdslnniChannelStatusTable contains status parameters of the ADSL2 channel. This table contains live data from equipment. The indexes of this table are ifIndex and hwadslnniChStatusUnit. " ::= { hwAdslnniCfg 4 } hwAdslnniChannelStatusEntry OBJECT-TYPE SYNTAX HwAdslnniChannelStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table hwAdslnniChannelStatusTable contains status parameters of the ADSL2 channel. This table contains live data from equipment. The indexes of this entry are ifIndex and hwadslnniChStatusUnit. " INDEX { ifIndex, hwadslnniChStatusUnit } ::= { hwAdslnniChannelStatusTable 1 } HwAdslnniChannelStatusEntry ::= SEQUENCE { hwadslnniChStatusUnit Adsl2Unit, hwadslnniChStatusChannelNum Unsigned32, hwadslnniChStatusActDataRate Unsigned32, hwadslnniChStatusPrevDataRate Unsigned32, hwadslnniChStatusActDelay Unsigned32, hwadslnniChStatusAtmStatus Adsl2ChAtmStatus, hwadslnniChStatusPtmStatus Adsl2ChPtmStatus, hwadslnniChStatusINP Unsigned32, hwadslnniChStatusRSRedundancy Unsigned32, hwadslnniChStatusRSSymbols Unsigned32, hwadslnniChStatusInterDepth Unsigned32, hwadslnniChStatusSymbolLength Unsigned32, hwadslnniChStatusRSSize Unsigned32 } hwadslnniChStatusUnit OBJECT-TYPE SYNTAX Adsl2Unit MAX-ACCESS not-accessible STATUS current DESCRIPTION "The termination unit ATUC(1) or ATUR(2)." ::= { hwAdslnniChannelStatusEntry 1 } hwadslnniChStatusChannelNum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Provides the bearer channel number associated with this row (i.e., the channel ifIndex). This enables determining the channel configuration profile and the channel thresholds profile applicable for this bearer channel. " ::= { hwAdslnniChannelStatusEntry 2 } hwadslnniChStatusActDataRate OBJECT-TYPE SYNTAX Unsigned32(0..200000000) UNITS "bits/second" MAX-ACCESS read-only STATUS current DESCRIPTION "The actual net data rate that the bearer channel is operating at, if in L0 power management state. In L1 or L2 states, it relates to the previous L0 state. The data rate is coded in bit/s. " REFERENCE "ITU-T G.997.1, paragraph 7.5.2.1" ::= { hwAdslnniChannelStatusEntry 3 } hwadslnniChStatusPrevDataRate OBJECT-TYPE SYNTAX Unsigned32(0..200000000) UNITS "bits/second" MAX-ACCESS read-only STATUS current DESCRIPTION "The previous net data rate that the bearer channel was operating at just before the latest rate change event. This could be a full or short initialization, fast retrain, DRA or power management transitions, excluding transitions between L0 state and L1 or L2 states. The data rate is coded in bit/s. " REFERENCE "ITU-T G.997.1, paragraph 7.5.2.2" ::= { hwAdslnniChannelStatusEntry 4 } hwadslnniChStatusActDelay OBJECT-TYPE SYNTAX Unsigned32(0..8176) UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The actual one-way interleaving delay introduced by the PMS-TC in the direction of the bearer channel, if in L0 power management state. In L1 or L2 states, it relates to the previous L0 state. It is coded in ms (rounded to the nearest ms). " REFERENCE "ITU-T G.997.1, paragraph 7.5.2.3" ::= { hwAdslnniChannelStatusEntry 5 } hwadslnniChStatusAtmStatus OBJECT-TYPE SYNTAX Adsl2ChAtmStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates current state (existing failures) of the ADSL channel in case its Data Path is ATM. This is a bit-map of possible conditions. The various bit positions are: noFailure(0) - This bit position positively reports that no defect or failure exists. noCellDelineation(1) - The link was successfully initialized, but cell delineation was never acquired on the associated ATM data path. lossOfCellDelineation(2) - Loss of cell delineation on the associated ATM data path. In case the channel is not of ATM Data Path the object is set to '0'. " REFERENCE "ITU-T G.997.1, paragraph 7.1.4" ::= { hwAdslnniChannelStatusEntry 6 } hwadslnniChStatusPtmStatus OBJECT-TYPE SYNTAX Adsl2ChPtmStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates current state (existing failures) of the ADSL channel in case its Data Path is PTM. This is a bit-map of possible conditions. The various bit positions are: noFailure(0) - This bit position positively reports that no defect or failure exists. outOfSync (1) - Out of synchronization. In case the channel is not of PTM Data Path the object is set to '0'. " REFERENCE "ITU-T G.997.1, paragraph 7.1.5" ::= { hwAdslnniChannelStatusEntry 7 } hwadslnniChStatusINP OBJECT-TYPE SYNTAX Unsigned32(0..254) UNITS "0.1 DMT symbol" MAX-ACCESS read-only STATUS current DESCRIPTION "The actual impulse noise protection (INP) on the bearer channel in L0 state. " REFERENCE "ITU-T G.997.1, paragraph 7.5.2.4" ::= { hwAdslnniChannelStatusEntry 8 } hwadslnniChStatusRSRedundancy OBJECT-TYPE SYNTAX Unsigned32(0..16) UNITS "byte" MAX-ACCESS read-only STATUS current DESCRIPTION "The actual number of Reed-Solomon redundancy bytes per codeword used in the latency path in which the bearer channel is transported. The value is coded in bytes. Range: 0-16. The value 0 indicates no Reed-Solomon coding. " REFERENCE "ITU-T G.997.1, paragraph 7.5.2.6.2" ::= { hwAdslnniChannelStatusEntry 9 } hwadslnniChStatusRSSymbols OBJECT-TYPE SYNTAX Unsigned32 UNITS "0.01 DMT symbol" MAX-ACCESS read-only STATUS current DESCRIPTION "The DMT Symbol number per codeword used in the latency path in which the bearer channel is transported. " REFERENCE "ITU-T G.997.1, paragraph 7.5.2.3" ::= { hwAdslnniChannelStatusEntry 10 } hwadslnniChStatusInterDepth OBJECT-TYPE SYNTAX Unsigned32(1..4096) MAX-ACCESS read-only STATUS current DESCRIPTION "The actual Reed-Solomon codeword size used in the latency path in which the bearer channel is transported. The value ranges from 1 to 4096 by step of 1. The value 1 indicates no interleaving. " REFERENCE "ITU-T G.997.1, paragraph 7.5.2.6.4" ::= { hwAdslnniChannelStatusEntry 11 } hwadslnniChStatusSymbolLength OBJECT-TYPE SYNTAX Unsigned32(0..65535) UNITS "bit" MAX-ACCESS read-only STATUS current DESCRIPTION "The actual number of bits per symbol assigned to the latency path in which the bearer channel is transported. This value does not include trellis overhead. " REFERENCE "ITU-T G.997.1, paragraph 7.5.2.6.3" ::= { hwAdslnniChannelStatusEntry 12 } hwadslnniChStatusRSSize OBJECT-TYPE SYNTAX Unsigned32(0..255) UNITS "byte" MAX-ACCESS read-only STATUS current DESCRIPTION "The actual Reed-Solomon codeword size used in the latency path in which the bearer channel is transported. " REFERENCE "ITU-T G.997.1, paragraph 7.5.2.6.1" ::= { hwAdslnniChannelStatusEntry 13 } hwAdslnniSCStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF HwAdslnniSCStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table hwadslnniSCStatusTable contains status parameters of the ADSL2 sub-carriers. The indexes of this table are ifIndex and hwAdslnniSCStatusDirection. " ::= { hwAdslnniCfg 5 } hwAdslnniSCStatusEntry OBJECT-TYPE SYNTAX HwAdslnniSCStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table hwadslnniSCStatusTable contains status parameters of the ADSL2 sub-carriers. The indexes of this entry are ifIndex and hwAdslnniSCStatusDirection. " INDEX { ifIndex, hwAdslnniSCStatusDirection } ::= { hwAdslnniSCStatusTable 1 } HwAdslnniSCStatusEntry ::= SEQUENCE { hwAdslnniSCStatusDirection Adsl2Direction, hwadslnniSCStatusSnr OCTET STRING, hwadslnniSCStatusBitsAlloc OCTET STRING, hwadslnniSCStatusGainAlloc OCTET STRING, hwadslnniSCStatusTssi Adsl2Tssi } hwAdslnniSCStatusDirection OBJECT-TYPE SYNTAX Adsl2Direction MAX-ACCESS not-accessible STATUS current DESCRIPTION "The direction of the sub-carrier is either upstream or downstream." ::= { hwAdslnniSCStatusEntry 1 } hwadslnniSCStatusSnr OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..512)) MAX-ACCESS read-only STATUS current DESCRIPTION "The SNR Margin per sub-carrier, expressing the ratio between the received signal power and received noise power per subscriber. It is an array of 512 octets, designed for supporting up to 512 (downstream) sub-carriers. The number of utilized octets on downstream direction depends on NSCds, and on upstream direction it depends on NSCus. This value is referred here as NSC. Octet i (0 <= i < NSC) is set to a value in the range 0 to 254 to indicate that the respective downstream or upstream sub- carrier i has SNR of: (-32 + Adsl2SubcarrierSnr(i)/2) in dB (i.e., -32 to 95dB). The special value 255 means that no measurement could be done for the subcarrier because it is out of the PSD mask passband or that the noise PSD is out of range to be represented. Each value in this array is 8 bits wide. " REFERENCE "ITU-T G.997.1, paragraph 7.5.1.20.2 (SNRpsds) and paragraph 7.5.1.20.4 (SNRpsus)" ::= { hwAdslnniSCStatusEntry 2 } hwadslnniSCStatusBitsAlloc OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) UNITS "bits" MAX-ACCESS read-only STATUS current DESCRIPTION "The bits allocation per sub-carrier. An array of 256 octets (512 nibbles), designed for supporting up to 512 (downstream) sub-carriers. The number of utilized nibbles on downstream direction depends on NSCds, and on upstream direction it depends on NSCus. This value is referred here as NSC. Nibble i (0 <= i < NSC) is set to a value in the range 0 to 15 to indicate that the respective downstream or upstream sub-carrier i has the same amount of bits allocation. " REFERENCE "ITU-T G.997.1, paragraph 7.5.1.21.1 (BITSpsds) and paragraph 7.5.1.21.2 (BITSpsus)" ::= { hwAdslnniSCStatusEntry 3 } hwadslnniSCStatusGainAlloc OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..1024)) MAX-ACCESS read-only STATUS current DESCRIPTION "The gain allocation per sub-carrier. An array of 512 16-bits values, designed for supporting up to 512 (downstream) sub- carriers. The number of utilized octets on downstream direction depends on NSCds, and on upstream direction it depends on NSCus. This value is referred here as NSC. Value i (0 <= i < NSC) is in the range 0 to 4093 to indicate that the respective downstream or upstream sub-carrier i has the same amount of gain value. The gain value is represented as a multiple of 1/512 on linear scale. Each value in this array is 16 bits wide and is stored in big endian format. " REFERENCE "ITU-T G.997.1, paragraph 7.5.1.21.3 (GAINSpsds) and paragraph 7.5.1.21.4 (GAINSpsus)" ::= { hwAdslnniSCStatusEntry 4 } hwadslnniSCStatusTssi OBJECT-TYPE SYNTAX Adsl2Tssi MAX-ACCESS read-only STATUS current DESCRIPTION "The transmit spectrum shaping (TSSi) breakpoints expressed as the set of breakpoints exchanged during G.994.1. Each breakpoint is a pair of values occupying 3 octets with the following structure: First 2 octets - Index of the subcarrier used in the context of the breakpoint. Third octet - The shaping parameter at the breakpoint. Subcarrier index is an unsigned number in the range 1 to either NSCds (downstream direction) or NSCus (upstream direction). The shaping parameter value is in the range 0 to 127 (units of -0.5dB). The special value 127 indicates that the subcarrier is not transmitted. " REFERENCE "ITU-T G.997.1, paragraph 7.5.1.21.5 (TSSpsds) and paragraph 7.5.1.21.6 (TSSpsus)" ::= { hwAdslnniSCStatusEntry 5 } -- AdslnniStatistics hwAdslnniStatisticsTable OBJECT-TYPE SYNTAX SEQUENCE OF HwAdslnniStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table hwAdslnniStatisticsTable contains statistics of the Adsl NNI. The index of this table is ifIndex. " ::= { hwAdslnniStatistics 1 } hwAdslnniStatisticsEntry OBJECT-TYPE SYNTAX HwAdslnniStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table hwAdslnniStatisticsTable contains statistics of the Adsl NNI. The index of this entry is ifIndex. " INDEX { ifIndex } ::= { hwAdslnniStatisticsTable 1 } HwAdslnniStatisticsEntry ::= SEQUENCE { hwAdslnniRxFrameCount Counter32, hwAdslnniRxBytesCount Counter32, hwAdslnniTxFrameCount Counter32, hwAdslnniTxBytesCount Counter32, hwAdslnniStatisticsClear INTEGER } hwAdslnniRxFrameCount OBJECT-TYPE SYNTAX Counter32 UNITS "frames" MAX-ACCESS read-only STATUS current DESCRIPTION "The ADSLNNI port receive OK frames." ::= { hwAdslnniStatisticsEntry 1 } hwAdslnniRxBytesCount OBJECT-TYPE SYNTAX Counter32 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "The ADSLNNI port receive OK bytes." ::= { hwAdslnniStatisticsEntry 2 } hwAdslnniTxFrameCount OBJECT-TYPE SYNTAX Counter32 UNITS "frames" MAX-ACCESS read-only STATUS current DESCRIPTION "The ADSLNNI port transmit OK frames." ::= { hwAdslnniStatisticsEntry 3 } hwAdslnniTxBytesCount OBJECT-TYPE SYNTAX Counter32 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "The ADSLNNI port transmit OK bytes." ::= { hwAdslnniStatisticsEntry 4 } hwAdslnniStatisticsClear OBJECT-TYPE SYNTAX INTEGER { resetStat(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Clear the statistics of ADSL NNI, Options: 1. resetStat(1) -clear the statistics " ::= { hwAdslnniStatisticsEntry 5 } -- PM line current counters hwAdslnniPMLineCurrTable OBJECT-TYPE SYNTAX SEQUENCE OF HwAdslnniPMLineCurrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table hwAdslnniPMLineCurrTable contains current Performance Monitoring results of ADSL2 lines. The indexes of this table are ifIndex and hwadslnniPMLCurrUnit. " ::= { hwAdslnniPMLine 1 } hwAdslnniPMLineCurrEntry OBJECT-TYPE SYNTAX HwAdslnniPMLineCurrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table hwAdslnniPMLineCurrTable contains current Performance Monitoring results of ADSL2 lines. The indexes of this entry are ifIndex and hwadslnniPMLCurrUnit. " INDEX { ifIndex, hwadslnniPMLCurrUnit } ::= { hwAdslnniPMLineCurrTable 1 } HwAdslnniPMLineCurrEntry ::= SEQUENCE { hwadslnniPMLCurrUnit Adsl2Unit, hwadslnniPMLCurrValidIntervals Unsigned32, hwadslnniPMLCurrInvalidIntervals Unsigned32, hwadslnniPMLCurr15MTimeElapsed HCPerfTimeElapsed, hwadslnniPMLCurr15MFecs Counter32, hwadslnniPMLCurr15MEs Counter32, hwadslnniPMLCurr15MSes Counter32, hwadslnniPMLCurr15MLoss Counter32, hwadslnniPMLCurr15MUas Counter32 } hwadslnniPMLCurrUnit OBJECT-TYPE SYNTAX Adsl2Unit MAX-ACCESS not-accessible STATUS current DESCRIPTION "The termination unit atuc(1) or atur(2)." ::= { hwAdslnniPMLineCurrEntry 1 } hwadslnniPMLCurrValidIntervals OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid intervals." ::= { hwAdslnniPMLineCurrEntry 2 } hwadslnniPMLCurrInvalidIntervals OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Invalid intervals." ::= { hwAdslnniPMLineCurrEntry 3 } hwadslnniPMLCurr15MTimeElapsed OBJECT-TYPE SYNTAX HCPerfTimeElapsed UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Total elapsed seconds since this PM interval began. Note that the PM counters are not reset even when the XTU is reinitialized. They are reinitialized only when the agent itself is reset or reinitialized. " ::= { hwAdslnniPMLineCurrEntry 4 } hwadslnniPMLCurr15MFecs OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds during this interval where there was at least one FEC correction event for one or more bearer channels in this line. This parameter is inhibited during UAS or SES. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { hwAdslnniPMLineCurrEntry 5 } hwadslnniPMLCurr15MEs OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds during this interval where there was: ATU-C: CRC-8 >= 1 for one or more bearer channels OR LOS >= 1 OR SEF >=1 OR LPR >= 1 ATU-R: FEBE >= 1 for one or more bearer channels OR LOS-FE >=1 OR RDI >=1 OR LPR-FE >=1 . This parameter is inhibited during UAS. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { hwAdslnniPMLineCurrEntry 6 } hwadslnniPMLCurr15MSes OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds during this interval where there was: ATU-C: (CRC-8 summed over all bearer channels) >= 18 OR LOS >= 1 OR SEF >= 1 OR LPR >= 1 ATU-R: (FEBE summed over all bearer channels) >= 18 OR LOS-FE >= 1 OR RDI >= 1 OR LPR-FE >= 1 . This parameter is inhibited during UAS. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { hwAdslnniPMLineCurrEntry 7 } hwadslnniPMLCurr15MLoss OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds during this interval where there was LOS (or LOS-FE for ATU-R). " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { hwAdslnniPMLineCurrEntry 8 } hwadslnniPMLCurr15MUas OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds in Unavailability State during this interval. Unavailability begins at the onset of 10 contiguous severely-errored seconds, and ends at the onset of 10 contiguous seconds with no severely-errored seconds. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { hwAdslnniPMLineCurrEntry 9 } hwAdslnniPMLineCurrInitTable OBJECT-TYPE SYNTAX SEQUENCE OF HwAdslnniPMLineCurrInitEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table hwAdslnniPMLineCurrInitTable contains current initialization counters of the ADSL2 line. The index of this table consists of an interface index, where the interface has an ifType of adslnni, and a termination unit. The index of this table is ifIndex. " ::= { hwAdslnniPMLine 2 } hwAdslnniPMLineCurrInitEntry OBJECT-TYPE SYNTAX HwAdslnniPMLineCurrInitEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table hwAdslnniPMLineCurrInitTable contains current initialization counters of the ADSL2 line. The index of this table consists of an interface index, where the interface has an ifType of adslnni, and a termination unit. The index of this entry is ifIndex. " INDEX { ifIndex } ::= { hwAdslnniPMLineCurrInitTable 1 } HwAdslnniPMLineCurrInitEntry ::= SEQUENCE { hwAdslnniPMLCurrInit15MTimeElapsed Unsigned32, hwAdslnniPMLCurrInit15MFullInits Unsigned32, hwAdslnniPMLCurrInit15MFailedFullInits Unsigned32, hwAdslnniPMLCurrInit15MShortInits Unsigned32, hwAdslnniPMLCurrInit15MFailedShortInits Unsigned32 } hwAdslnniPMLCurrInit15MTimeElapsed OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Total elapsed seconds since this PM interval began. Note that the PM counters are not reset even when the XTU is reinitialized. They are reinitialized only when the agent itself is reset or reinitialized. " ::= { hwAdslnniPMLineCurrInitEntry 1 } hwAdslnniPMLCurrInit15MFullInits OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of full initializations attempted on the line (successful and failed) during this interval. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { hwAdslnniPMLineCurrInitEntry 2 } hwAdslnniPMLCurrInit15MFailedFullInits OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of failed full initializations on the line during this interval. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { hwAdslnniPMLineCurrInitEntry 3 } hwAdslnniPMLCurrInit15MShortInits OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of short initializations attempted on the line (successful and failed) during this interval. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { hwAdslnniPMLineCurrInitEntry 4 } hwAdslnniPMLCurrInit15MFailedShortInits OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of failed short initializations on the line during this interval. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { hwAdslnniPMLineCurrInitEntry 5 } hwAdslnniPMChCurrTable OBJECT-TYPE SYNTAX SEQUENCE OF HwAdslnniPMChCurrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table hwadslnniPMChCurrTable contains current Performance Monitoring results of the ADSL2 channel. The indexes of this table are ifIndex and hwadslnniPMChCurrUnit. " ::= { hwAdslnniPMChannel 1 } hwAdslnniPMChCurrEntry OBJECT-TYPE SYNTAX HwAdslnniPMChCurrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table hwadslnniPMChCurrTable contains current Performance Monitoring results of the ADSL2 channel. The indexes of this entry are ifIndex and hwadslnniPMChCurrUnit. " INDEX { ifIndex, hwadslnniPMChCurrUnit } ::= { hwAdslnniPMChCurrTable 1 } HwAdslnniPMChCurrEntry ::= SEQUENCE { hwadslnniPMChCurrUnit Adsl2Unit, hwadslnniPMChCurrValidIntervals Unsigned32, hwadslnniPMChCurrInvalidIntervals Unsigned32, hwadslnniPMChCurr15MTimeElapsed HCPerfTimeElapsed, hwadslnniPMChCurr15MCodingViolations Unsigned32, hwadslnniPMChCurr15MCorrectedBlocks Unsigned32 } hwadslnniPMChCurrUnit OBJECT-TYPE SYNTAX Adsl2Unit MAX-ACCESS not-accessible STATUS current DESCRIPTION "The termination unit." ::= { hwAdslnniPMChCurrEntry 1 } hwadslnniPMChCurrValidIntervals OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid intervals." ::= { hwAdslnniPMChCurrEntry 2 } hwadslnniPMChCurrInvalidIntervals OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Invalid intervals." ::= { hwAdslnniPMChCurrEntry 3 } hwadslnniPMChCurr15MTimeElapsed OBJECT-TYPE SYNTAX HCPerfTimeElapsed UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Total elapsed seconds since this PM interval began. Note that the PM counters are not reset even when the XTU is reinitialized. They are reinitialized only when the agent itself is reset or reinitialized. " ::= { hwAdslnniPMChCurrEntry 4 } hwadslnniPMChCurr15MCodingViolations OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of CRC-8 (FEBE for ATU-R) anomalies occurring in the channel during the interval. This parameter is inhibited during UAS or SES. If the CRC is applied over multiple channels, then each related CRC-8 (or FEBE) anomaly should increment each of the counters related to the individual channels. " REFERENCE "ITU-T G.997.1, paragraph 7.2.2" ::= { hwAdslnniPMChCurrEntry 5 } hwadslnniPMChCurr15MCorrectedBlocks OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of FEC (FFEC for ATU-R) anomalies (corrected code words) occurring in the channel during the interval. This parameter is inhibited during UAS or SES. If the FEC is applied over multiple channels, then each related FEC (or FFEC) anomaly should increment each of the counters related to the individual channels. " REFERENCE "ITU-T G.997.1, paragraph 7.2.2" ::= { hwAdslnniPMChCurrEntry 6 } END