-- ============================================================================ -- Copyright (C) 2012 by HUAWEI TECHNOLOGIES. All rights reserved. -- Description: This MIB is used for defining Huawei's ADSL management MIB objects. -- Reference: -- Version: V1.23 -- ============================================================================ HUAWEI-ADSL-EXT-MIB DEFINITIONS ::= BEGIN IMPORTS adslLineMib,adslLineConfProfileEntry, adslLineConfProfileName, adslLineEntry, adslAturChanEntry, adslAtucChanEntry, adslAtucChanPerfDataEntry, adslAturChanPerfDataEntry, adslAtucChanIntervalEntry, adslAturChanIntervalEntry, adslTraps, adslAturPhysEntry, adslAtucPhysEntry, adslAtucPerfDataEntry, adslAtucIntervalEntry, adslLineAlarmConfProfileEntry, adslAturChanIntervalNumber, adslLineAlarmConfProfileName, adslAtucIntervalNumber, adslAturIntervalNumber,adslAtucChanIntervalNumber, adslAtucConfRateMode, adslAtucConfTargetSnrMgn, adslAtucConfMaxSnrMgn, adslAtucConfMinSnrMgn, adslAtucConfDownshiftSnrMgn, adslAtucConfUpshiftSnrMgn, adslAtucConfMinUpshiftTime, adslAtucConfMinDownshiftTime, adslAtucChanConfFastMinTxRate, adslAtucChanConfInterleaveMinTxRate, adslAtucChanConfFastMaxTxRate, adslAtucChanConfInterleaveMaxTxRate, adslAtucChanConfMaxInterleaveDelay, adslAturConfRateMode, adslAturConfRateChanRatio, adslAturConfTargetSnrMgn, adslAturConfMaxSnrMgn, adslAturConfMinSnrMgn, adslAturConfDownshiftSnrMgn, adslAturConfUpshiftSnrMgn, adslAturConfMinUpshiftTime, adslAturConfMinDownshiftTime, adslAturChanConfFastMinTxRate, adslAturChanConfInterleaveMinTxRate, adslAturChanConfFastMaxTxRate, adslAturChanConfInterleaveMaxTxRate, adslAturChanConfMaxInterleaveDelay, adslLineConfProfileRowStatus, adslAtucThresh15MinLofs, adslAtucThresh15MinLoss, adslAtucThresh15MinLols, adslAtucThresh15MinLprs, adslAtucThresh15MinESs, adslAtucThreshFastRateUp, adslAtucThreshInterleaveRateUp, adslAtucThreshFastRateDown, adslAtucThreshInterleaveRateDown, adslAtucInitFailureTrapEnable, adslAturThresh15MinLofs, adslAturThresh15MinLoss, adslAturThresh15MinLprs, adslAturThresh15MinESs, adslAturThreshFastRateUp, adslAturThreshInterleaveRateUp, adslAturThreshFastRateDown, adslAturThreshInterleaveRateDown, adslLineAlarmConfProfileRowStatus FROM ADSL-LINE-MIB ifIndex FROM IF-MIB ifType FROM RFC1213-MIB hwFrameIndex, hwSlotIndex,hwSubslotIndex,hwPortIndex,hwPortOperStatus,hwPortPrimaryStatus,hwPortSecondaryStatus, hwConfigChangeIP FROM HUAWEI-DEVICE-MIB hwIasConfigChangeTrapID FROM HWMUSA-DEV-MIB Integer32, Unsigned32, Gauge32, Counter32, OBJECT-TYPE, NOTIFICATION-TYPE, MODULE-IDENTITY FROM SNMPv2-SMI Adsl2TransmissionModeType, Adsl2PsdMaskDs, Adsl2PsdMaskUs, Adsl2SymbolProtection FROM ADSL2-LINE-TC-MIB adslLineExtEntry, adslConfProfileLineType,adslAtucThreshold15MinFailedFastR, adslAtucThreshold15MinSesL, adslAtucThreshold15MinUasL, adslAturThreshold15MinSesL, adslAturThreshold15MinUasL FROM ADSL-LINE-EXT-MIB PerfIntervalCount FROM PerfHist-TC-MIB HCPerfIntervalThreshold FROM HC-PerfHist-TC-MIB -- [RFC3705] sysName FROM SNMPv2-MIB RowStatus, PhysAddress, TruthValue, DateAndTime,TEXTUAL-CONVENTION FROM SNMPv2-TC hwAlarmId, hwAlarmTime, hwAlarmSn, hwCauseId, hwTrapType FROM HUAWEI-TC-MIB huaweiUtility FROM HUAWEI-MIB HWADSLSYMBOLPROTECTION, HWADSLTRANSMISSIONMODETYPE, HWADSL2ANNEXMSCOPE, hwAdsllinePvcVpi, hwAdslLinePvcVci, hwAdslAtucConfDownBitSwap, hwAdslAtucConfUpBitSwap, hwAdslTrellionsModeEnable FROM HUAWEI-ADSL-MIB hwBTSSAdslDeltTestOperResult FROM HUAWEI-BTEST-MIB; hwAdsl MODULE-IDENTITY LAST-UPDATED "201306250000Z" ORGANIZATION "Huawei Technologies Co.,Ltd." CONTACT-INFO "Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China Website: http://www.huawei.com Email: support@huawei.com " DESCRIPTION "This MIB is used for defining Huawei's ADSL management MIB objects." -- Revision history REVISION "201306250000Z" DESCRIPTION "V1.23, Add leaf node hwADSLExtLineProfChangeTrap in hwAdslCommonTrapsPrefix." REVISION "201212270000Z" DESCRIPTION "V1.22, modify the status of the nodes to deprecated:hwXdslDynamicInfoCollectInfoTable. hwAdslAtucConfDownBitSwap, hwAdslAtucConfUpBitSwap, hwAdslTrellionsModeEnable are not defined in ADSL-LINE_MIB, but in HUAWEI-ADSL-MIB" REVISION "201207010000Z" DESCRIPTION "V1.21, modify the node name from hwdslAtucChanPerfPrev1DayCrcBlksInfo to hwadslAtucChanPerfPrev1DayCrcBlksInfo. Modify the description of the leaf node: HwadslLineAlarmConfProfileCfgEntry, hwadsl2LExtLineProfForceInpUs, hwadsl2LExtLineProfForceInpDs" REVISION "201205020000Z" DESCRIPTION "V1.20, modify the description of the leaf nodes:hwxdslDynamicProfMaxNomPsdDsCfg, hwxdslDynamicProfMaxNomPsdUsCfg. Add leaf node hwadslAturChanL2NetDataRate, hwadslAtucChanL2NetDataRate" REVISION "201203200000Z" DESCRIPTION "V1.19, Add the definition of the leaf node hwadsl2MaximumInterleavedDepth. Modify the defination of the trap node hwAdslPortStatReachThresholdAlarmTrap. Add the leaf nodes in table hwAdslTrapsVbOids as follow:hwadslLinePMCurrentValue, hwadslLinePMThresholdValue." REVISION "201112050000Z" DESCRIPTION "V1.18, add the definition of the leaf node hwAdslLineAlarmConfProfileActiveFailAlarmSwitch, add the definition of the leaf node hwadslLineStatusLineRateDs, hwadslLineStatusLineRateUs. Modify the definition of the trap node hwADSLAlarmProfChangeTrap." REVISION "201107070000Z" DESCRIPTION "V1.17, modify the description of the leaf nodes:hwadsl2TranMissionStardardMaskCfg, hwadsl2TransMissionAnnexMaskCfg, hwAdslTransmissionModeCfg. modify the unit of the leaf nodes from bps to Kbps:hwadsl2L2ModeMinDataRateCfg, hwadsl2L2ModeMaxDataRateCfg, hwadsl2L2ModePayloadRateThresholdCfg." REVISION "201105100000Z" DESCRIPTION "V1.16, add the definition of the leaf node hwadslLineStatusLastRetrainInfo for getting the last retrained information." REVISION "201104070000Z" DESCRIPTION "V1.15, add annexA998-D-48, annexA998-D-128, annexB998ADE17-M2x-M in hwxdslDynamicProfClassMaskCfg. modify the description of hwxdslDynamicProfClassMaskCfg." REVISION "201102120000Z" DESCRIPTION "V1.14, Add leaf node hwadsl2LExtLineProfReferenceClock,hwadsl2LExtLineProfL3Time,hwadsl2LExtLineProfRfiBands, hwadsl2LExtLineProfDpboEPsd,hwadsl2LExtLineProfDpboEsEL,hwadsl2LExtLineProfDpboEselMin,hwadsl2LExtLineProfDpboEsCableModelA, hwadsl2LExtLineProfDpboEsCableModelB,hwadsl2LExtLineProfDpboEsCableModelC,hwadsl2LExtLineProfDpboMus, hwadsl2LExtLineProfDpboFMin,hwadsl2LExtLineProfDpboFMax,hwadsl2LExtLineProfMaxNomPsdUs,hwadsl2LExtLineProfMaxNomAtpDs, hwadsl2LExtLineProfMaxNomAtpUs,hwadsl2LExtLineProfInmIatoDs,hwadsl2LExtLineProfInmIatsDs,hwadsl2LExtLineProfInmCcDs, hwadsl2LExtLineProfInmInpeqModeDs, hwadsl2LExtLineProfForceInpDs,hwadsl2LExtLineProfForceInpUs,hwadsl2LExtLineProfInitPolicy, hwadsl2LExtLineProfL3ModeState,hwAdslAturPerfCurr15MLeftrs,hwAdslAturPerfCurr15MEfb,hwAdslAturPerfCurr15MMinEftr, hwAdslAturPerfCurr1DayLeftrs,hwAdslAturPerfCurr1DayEfb,hwAdslAturPerfCurr1DayMinEftr,hwAdslAturPerfPrev1DayLeftrs, hwAdslAturPerfPrev1DayEfb,hwAdslAturPerfPrev1DayMinEftr,hwAdslAturPerfCurrEverBeforeLeftrs,hwAdslAturPerfCurrEverBeforeEfb, hwAdslAturPerfCurrEverBeforeMinEftr,hwAdslAturIntervalLeftrs,hwAdslAturIntervalEfb,hwAdslAturIntervalMinEftr. Modify the description of the leaf node:hwAdslAtucPerfCurr15MLeftrs,hwAdslAtucPerfCurr15MEfb,hwAdslAtucPerfCurr15MMinEftr, hwAdslAtucPerfCurr1DayLeftrs,hwAdslAtucPerfCurr1DayEfb,hwAdslAtucPerfCurr1DayMinEftr,hwAdslAtucPerfPrev1DayLeftrs, hwAdslAtucPerfPrev1DayEfb,hwAdslAtucPerfPrev1DayMinEftr,hwAdslAtucPerfCurrEverBeforeLeftrs,hwAdslAtucPerfCurrEverBeforeEfb, hwAdslAtucPerfCurrEverBeforeMinEftr,hwAdslAtucIntervalLeftrs,hwAdslAtucIntervalEfb,hwAdslAtucIntervalMinEftr. modify the leaf name from hwadslLineAlarmConfProfXtucThresh15MinLeftrs to hwadslLineAlarmConfProfXturThresh15MinLeftrs. modify syntax from annexB997E17-M2x-NUS0 to annexB997E17-M2x-A in hwxdslDynamicProfClassMaskCfg. " REVISION "201101120000Z" DESCRIPTION "V1.13, Add leaf node hwadslLineStatusInitResult,hwadslLineStatusSigAttenDs,hwadslLineStatusSigAttenUs,hwadslLineStatusActPsdDs, hwadslLineStatusActPsdUs,hwadslAtucChanCurr15MStartTime,hwadslAtucChanCurr1DayStartTime,hwadslAturChanCurr15MStartTime,hwadslAturChanCurr1DayStartTime, hwAdslAturChanIntervalStartTime,hwAdslAtucPerfCurr15MStartTime,hwAdslAtucPerfCurr1DayStartTime,hwAdslAtucPerfCurr15MInmainpeq,hwAdslAtucPerfCurr15MInmame, hwAdslAtucPerfCurr15MInmaiat,hwAdslAtucPerfCurr1DayInmainpeq,hwAdslAtucPerfCurr1DayInmame,hwAdslAtucPerfCurr1DayInmaiat,hwAdslAtucPerfPre1DayInmainpeq, hwAdslAtucPerfPre1DayInmame,hwAdslAtucPerfPre1DayInmaiat,hwAdslAtucPerfCurrEverBeforeInmainpeq,hwAdslAtucPerfCurrEverBeforeInmame, hwAdslAtucPerfCurrEverBeforeInmaiat,hwAdslAtucIntervalStartTime,hwAdslAtucIntervalInmainpeq,hwAdslAtucIntervalInmame,hwAdslAtucIntervalInmaiat, hwAdslAtucChanIntervalStartTime,hwAdslAturPerfCurr15MStartTime,hwAdslAturPerfCurr1DayStartTime,hwAdslAturPerfCurr15MInmainpeq, hwAdslAturPerfCurr15MInmame,hwAdslAturPerfCurr15MInmaiat,hwAdslAturPerfCurr1DayInmainpeq,hwAdslAturPerfCurr1DayInmame,hwAdslAturPerfCurr1DayInmaiat, hwAdslAturPerfPre1DayInmainpeq,hwAdslAturPerfPre1DayInmame,hwAdslAturPerfPre1DayInmaiat,hwAdslAturPerfCurrEverBeforeInmainpeq, hwAdslAturPerfCurrEverBeforeInmame,hwAdslAturPerfCurrEverBeforeInmaiat,hwAdslAturIntervalStartTime,hwAdslAturIntervalInmainpeq, hwAdslAturIntervalInmame,hwAdslAturIntervalInmaiat,hwadslAtucTransmissionCapabilitiesInfo." REVISION "201012190000Z" DESCRIPTION "V1.12, Add leaf node hwadslAtucChanActNetDataRate,hwadslAtucChanActINPAgainstREIN,hwadslLineExtConfProfRtxModeDs,hwadslLineExtConfProfLeftrThreshDs, hwadslLineExtConfProfMinEtrRtxDs,hwadslLineExtConfProfMaxEtrRtxDs,hwadslLineExtConfProfMaxNdrRtxDs,hwadslLineExtConfProfMaxDelayRtxDs, hwadslLineExtConfProfMinDelayRtxDs,hwadslLineExtConfProfMinInpShineRtxDs,hwadslLineExtConfProfShineRatioRtxDs,hwadslLineExtConfProfMinInpReinRtxDs, hwadslLineExtConfProfIatReinRtxDs,hwadslLineStatusRtxUsedDs,hwadslLineAlarmConfProfXtucThresh15MinLeftrs,hwAdslAtucPerfCurr15MLeftrs, hwAdslAtucPerfCurr15MEfb,hwAdslAtucPerfCurr15MMinEftr,hwAdslAtucPerfCurr1DayLeftrs,hwAdslAtucPerfCurr1DayEfb,hwAdslAtucPerfCurr1DayMinEftr, hwAdslAtucPerfPrev1DayLeftrs,hwAdslAtucPerfPrev1DayEfb,hwAdslAtucPerfPrev1DayMinEftr,hwAdslAtucPerfCurrEverBeforeLeftrs,hwAdslAtucPerfCurrEverBeforeEfb, hwAdslAtucPerfCurrEverBeforeMinEftr,hwAdslAtucIntervalLeftrs,hwAdslAtucIntervalEfb,hwAdslAtucIntervalMinEftr for G.998.4 retransmission function." REVISION "201010140000Z" DESCRIPTION "V1.11, Add leaf node hwXdslDynamicInfoCollectPortList in table hwXdslDynamicInfoCollectInfoTable for collecting dynamic info with port list." REVISION "201009280000Z" DESCRIPTION "V1.10, Modify the output string length range of hwadslAturInvG994VendorId and hwadslAtucInvG994VendorId nodes." REVISION "201009260000Z" DESCRIPTION "V1.09, Add invalid value: hwXdslPortIopCaptureOperTypeCfg, hwXdslPortIopCaptureOperStatusInfo, hwXdslDynamicInfoCollectInfo. modify the description of the whole MIB file." REVISION "201009070000Z" DESCRIPTION "V1.08, Modify the OBJECTS list of node hwadslAturPhysInfoTable. Add the definition of the node: hwadslAturInvG994VendorId, hwadslAturLInvSelfTestResult. Add leaf node hwadslAturInvG994VendorId and hwadslAturLInvSelfTestResult in table hwadslAturPhysInfoTable. Modify the OBJECTS list of node hwadslAtucPhysInfoTable. Add the definition of the node: hwadslAtucInvG994VendorId, hwadslAtucLInvSelfTestResult. Add leaf node hwadslAtucInvG994VendorId and hwadslAtucLInvSelfTestResult in table hwadslAtucPhysInfoTable. Modify the OBJECTS list of node hwadslAtucPerfDataInfoTable. Add the definition of the node: hwAdslAtucPerfFullInitsInfo, hwAdslAtucPerfCurr15MinFullInitsInfo, hwAdslAtucPerfCurr1DayFullInitsInfo, hwAdslAtucPerfPrev1DayFullInitsInfo. Add leaf node hwAdslAtucPerfFullInitsInfo, hwAdslAtucPerfCurr15MinFullInitsInfo, hwAdslAtucPerfCurr1DayFullInitsInfo, hwAdslAtucPerfPrev1DayFullInitsInfo. in table hwadslAtucPerfDataInfoTable. Modify the name of the node: hwAdslAtucPerfFailFullInitsInfo, hwAdslAtucPerfCurr15MinFailFullInitsInfo, hwAdslAtucPerfCurr1DayFailFullInitsInfo, hwAdslAtucPerfPrev1DayFailFullInitsInfo for trap optimization. " REVISION "201008140000Z" DESCRIPTION "V1.07, Modify the name of the node hwAdslChipsetNotAvailbaleAlarmTrap.The new name is hwAdslChipsetNotAvailableAlarmTrap." REVISION "201007190900Z" DESCRIPTION "V1.06, Modify the OBJECTS list of node hwADSLLineProfChangeTrap. Add the definition of the trap node: hwADSLLineProfChangeTrap, hwADSLAlarmProfChangeTrap. Add leaf node hwADSLProfOperType in table hwAdslTrapsVbOids. Modify the definition of the trap node: hwAdslDeltOperResultInfoTrap for trap optimization. The description of hwXdslPortPowerStateCfg is changed and enumerated value l1(4) is added." REVISION "201006220000Z" DESCRIPTION "V1.05, Modify chinese character." REVISION "201005200000Z" DESCRIPTION "V1.04, Modify the OBJECTS list of node hwAdslPortActRateLowerThresholdAlarmTrap. Add the definition of the trap node: hwAdslSeltStartResultTrap. Add leaf nodes hwAdslRequestID, hwadslSeltTestStartResult in table hwAdslTrapsVbOids. Modify the definition of the trap node hwAdslPortStatusChangeInfoTrap." REVISION "201003220000Z" DESCRIPTION "V1.03, Modify the SYNTAX string. Add invalid value. Modify the description." REVISION "201002080000Z" DESCRIPTION "V1.02, modify the description of the leaf node, and delete the parameter hwPortDesc of the alarm trap." REVISION "201001120000Z" DESCRIPTION "V1.01, add the definition of the trap node. Change the data type of nodes hwXdslPortLastUpTimeCfg, hwXdslPortLastDownTimeCfg, and hwXdslPortRetrainCntCfg from PortDateAndTime to DateAndTime." REVISION "200208220000Z" DESCRIPTION "V1.00, initial version." ::= { huaweiUtility 31 } -- hwAdslMibObjects hwAdslMibObjects OBJECT IDENTIFIER ::= { hwAdsl 1} -- hwadslAturChanInfoTable hwadslAturChanInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF HwadslAturChanInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides the channel parameters of the ATUR end of each port. The index of this table is ifIndex. " ::= { hwAdslMibObjects 1 } hwadslAturChanInfoEntry OBJECT-TYPE SYNTAX HwadslAturChanInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides the channel parameters of the ATUR end of each port. The index of this entry is ifIndex. " INDEX { ifIndex } ::= { hwadslAturChanInfoTable 1 } HwadslAturChanInfoEntry ::= SEQUENCE { hwadslAturChanCurrINPInfo Gauge32, hwadslAturChanRsSymbolsInfo Gauge32, hwadslAturChanRsRedundancyInfo Gauge32, hwadslAturChanRsDepthInfo Gauge32, hwadslAturChanSymbolLengthInfo Gauge32, hwadslAturChanPhyRrrcBitsInfo Gauge32, hwadslAturChanPhyRtxQueueInfo Gauge32, hwadslAturChanRsSizeInfo Gauge32, hwadslAturChanCodeGainInfo Gauge32, hwadslAturChanL2NetDataRate Gauge32 } hwadslAturChanCurrINPInfo OBJECT-TYPE SYNTAX Gauge32 UNITS "DMT Symbol" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates Impulse Noise Protection on upstream direction. The value multiply 1/10000 is the real value. Unit: DMT Symbol " ::= { hwadslAturChanInfoEntry 1 } hwadslAturChanRsSymbolsInfo OBJECT-TYPE SYNTAX Gauge32 UNITS "byte" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates Reed-Solomon symbols on upstream direction. The value multiply 1/10000 is the real value. Unit: byte " ::= { hwadslAturChanInfoEntry 2 } hwadslAturChanRsRedundancyInfo OBJECT-TYPE SYNTAX Gauge32 UNITS "byte" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates Reed-Solomon redundancy on upstream direction. Unit: byte " ::= { hwadslAturChanInfoEntry 3 } hwadslAturChanRsDepthInfo OBJECT-TYPE SYNTAX Gauge32 UNITS "byte" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates Reed-Solomon depth on upstream direction. Unit: byte " ::= { hwadslAturChanInfoEntry 4 } hwadslAturChanSymbolLengthInfo OBJECT-TYPE SYNTAX Gauge32 UNITS "bit" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the Bit Number of the DMT Symbol on upstream direction. Unit: bit " ::= { hwadslAturChanInfoEntry 5 } hwadslAturChanPhyRrrcBitsInfo OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The bits in the channel that used to retransmission on upstream direction." ::= { hwadslAturChanInfoEntry 6 } hwadslAturChanPhyRtxQueueInfo OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Queues in send buffer on upstream direction." ::= { hwadslAturChanInfoEntry 7 } hwadslAturChanRsSizeInfo OBJECT-TYPE SYNTAX Gauge32 UNITS "byte" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates Reed-Solomon Codeword Size on upstream direction. Range: 0-255 Unit: byte " ::= { hwadslAturChanInfoEntry 8 } hwadslAturChanCodeGainInfo OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates Code Gain on upstream direction. It ranges from 0 to 16 units of 0.5 dB (physical values are 0 to 8 dB). " ::= { hwadslAturChanInfoEntry 9 } hwadslAturChanL2NetDataRate OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "In L2 state, this parameter reports the Net Data Rate in low power state. The data rate is coded in steps of 1000 bit/s. " ::= { hwadslAturChanInfoEntry 10} -- hwadslAturPhysInfoTable hwadslAturPhysInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF HwadslAturPhysInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object provides the physical layer parameters of each ATUR. The index of this table is ifIndex. " ::= { hwAdslMibObjects 2 } hwadslAturPhysInfoEntry OBJECT-TYPE SYNTAX HwadslAturPhysInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object provides the physical layer parameters of each ATUR. The index of this entry is ifIndex. " INDEX { ifIndex } ::= { hwadslAturPhysInfoTable 1 } HwadslAturPhysInfoEntry ::= SEQUENCE { hwadslAturTransmissionCapabilitiesInfo Adsl2TransmissionModeType, hwAdslAturCurrSignalAtnInfo Gauge32, hwadslAturInvG994VendorId OCTET STRING, hwadslAturLInvSelfTestResult Unsigned32 } hwadslAturTransmissionCapabilitiesInfo OBJECT-TYPE SYNTAX Adsl2TransmissionModeType MAX-ACCESS read-only STATUS current DESCRIPTION "The ATU transmission system capability list of the different coding types. It is coded in a bit-map representation with 1 or more bits set. A bit set to '1' means that the ATU supports the respective coding. The value may be derived from the handshaking procedures defined in G.994.1. " ::= { hwadslAturPhysInfoEntry 1 } hwAdslAturCurrSignalAtnInfo OBJECT-TYPE SYNTAX Gauge32 (0..630) UNITS "tenth dB" MAX-ACCESS read-only STATUS current DESCRIPTION "The signal attenuation value on ATUR: It indicates the difference between the transmit signal of the ATU-C and the receive signal of the ATU-R. Range: 0-630 Unit: tenth dB " ::= { hwadslAturPhysInfoEntry 2 } hwadslAturInvG994VendorId OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The ATU G.994.1 Vendor ID as inserted in the G.994.1 CL/CLR message. It consists of 8 binary octets, including a country code followed by a (regionally allocated) provider code, as defined in Recommendation T.35." REFERENCE "ITU-T G.997.1, paragraph 7.4" ::= { hwadslAturPhysInfoEntry 3 } hwadslAturLInvSelfTestResult OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The ATU self-test result, coded as a 32-bit value. The most significant octet of the result is '0' if the self-test passed, and '1' if the self-test failed. The interpretation of the other octets is vendor discretionary." REFERENCE "ITU-T G.997.1, paragraph 7.4" ::= { hwadslAturPhysInfoEntry 4 } -- hwadslAtucChanInfoTable hwadslAtucChanInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF HwadslAtucChanInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object provides the channel parameters of each ATUC. The index of this table is ifIndex. " ::= { hwAdslMibObjects 3 } hwadslAtucChanInfoEntry OBJECT-TYPE SYNTAX HwadslAtucChanInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object provides the channel parameters of each ATUC. The index of this entry is ifIndex." INDEX { ifIndex } ::= { hwadslAtucChanInfoTable 1 } HwadslAtucChanInfoEntry ::= SEQUENCE { hwadslAtucChanCurrINPInfo Gauge32, hwadslAtucChanRsSymbolsInfo Gauge32, hwadslAtucChanRsRedundancyInfo Gauge32, hwadslAtucChanRsDepthInfo Gauge32, hwadslAtucChanSymbolLengthInfo Gauge32, hwadslAtucChanPhyRrrcBitsInfo Gauge32, hwadslAtucChanPhyRtxQueueInfo Gauge32, hwadslAtucChanRsSizeInfo Gauge32, hwadslAtucChanCodeGainInfo Gauge32, hwadslAtucChanPcbInfo Gauge32, hwadslAtucChanActNetDataRate Gauge32, hwadslAtucChanActINPAgainstREIN Gauge32, hwadslAtucChanL2NetDataRate Gauge32 } hwadslAtucChanCurrINPInfo OBJECT-TYPE SYNTAX Gauge32 UNITS "DMT Symbol" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates Impulse Noise Protection on downstream direction. The value multiply 1/10000 is the real value. If retransmission is used in a given transmit direction, this parameter reports the actual impulse noise protection (INP) against SHINE (under specific conditions detailed in G.998.4) on the bearer channel in the L0 state.In the L2 state, the parameter contains the INP in the previous L0 state. Unit: DMT Symbol " ::= { hwadslAtucChanInfoEntry 1 } hwadslAtucChanRsSymbolsInfo OBJECT-TYPE SYNTAX Gauge32 UNITS "byte" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates Reed-Solomon symbols on downstream direction. The value multiply 1/10000 is the real value. Unit: byte " ::= { hwadslAtucChanInfoEntry 2 } hwadslAtucChanRsRedundancyInfo OBJECT-TYPE SYNTAX Gauge32 UNITS "byte" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates Reed-Solomon redundancy on downstream direction. Unit: byte " ::= { hwadslAtucChanInfoEntry 3 } hwadslAtucChanRsDepthInfo OBJECT-TYPE SYNTAX Gauge32 UNITS "byte" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates Reed-Solomon depth on downstream direction. Unit: byte " ::= { hwadslAtucChanInfoEntry 4 } hwadslAtucChanSymbolLengthInfo OBJECT-TYPE SYNTAX Gauge32 UNITS "bit" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the Bit Number of the DMT Symbol on downstream direction. Unit: bit " ::= { hwadslAtucChanInfoEntry 5 } hwadslAtucChanPhyRrrcBitsInfo OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The bits in the channel that used to retransmission on downstream direction." ::= { hwadslAtucChanInfoEntry 6 } hwadslAtucChanPhyRtxQueueInfo OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Queues in send buffer on downstream direction." ::= { hwadslAtucChanInfoEntry 7 } hwadslAtucChanRsSizeInfo OBJECT-TYPE SYNTAX Gauge32 UNITS "byte" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates Reed-Solomon Codeword Size on downstream direction. Range: 0-255 Unit: byte " ::= { hwadslAtucChanInfoEntry 8 } hwadslAtucChanCodeGainInfo OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates Code Gain on downstream direction. It ranges from 0 to 16 units of 0.5 dB (physical values are 0 to 8 dB). " ::= { hwadslAtucChanInfoEntry 9 } hwadslAtucChanPcbInfo OBJECT-TYPE SYNTAX Gauge32 UNITS "tenth dB" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates Power Cut-back on downstream direction. It ranges from 0 to 400 units of 0.1 dB (physical values are 0 to 40 dB) Unit: tenth dB " ::= { hwadslAtucChanInfoEntry 10 } hwadslAtucChanActNetDataRate OBJECT-TYPE SYNTAX Gauge32 UNITS "bits/second" MAX-ACCESS read-only STATUS current DESCRIPTION "Independent whether retransmission is used or not in a given transmit direction: In L0 state, this parameter reports the Net Data Rate (as specified in G.992.3, G.992.5 or G.993.2) at which the bearer channel is operating. In L2 state, the parameter contains the Net Data Rate (as specified in G.992.3, G.992.5 or G.993.2) in the previous L0 state. The data rate is coded in steps of 1000 bit/s. " REFERENCE "ITU-T G.997.1, paragraph 7.5.2.8" ::= { hwadslAtucChanInfoEntry 11 } hwadslAtucChanActINPAgainstREIN OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "If retransmission is used in a given transmit direction, this parameter reports the actual impulse noise protection (INP) against REIN (under specific conditions detailed in G.998.4) on the bearer channel in the L0 state. In the L2 state, the parameter contains the INP in the previous L0 state. The value is coded in fractions of DMT symbols with a granularity of 0.1 symbols. " REFERENCE "ITU-T G.997.1, paragraph 7.5.2.9" ::= { hwadslAtucChanInfoEntry 12 } hwadslAtucChanL2NetDataRate OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "In L2 state, this parameter reports the Net Data Rate in low power state. The data rate is coded in steps of 1000 bit/s. " ::= { hwadslAtucChanInfoEntry 13} -- hwadslLineConfProfileCfgTable hwadslLineConfProfileCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF HwadslLineConfProfileCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains information on the ADSL line configuration. The index of this table is adslLineConfProfileName. " ::= { hwAdslMibObjects 4 } hwadslLineConfProfileCfgEntry OBJECT-TYPE SYNTAX HwadslLineConfProfileCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains information on the ADSL line configuration. The index of this entry is adslLineConfProfileName. " INDEX { adslLineConfProfileName } ::= { hwadslLineConfProfileCfgTable 1 } HwadslLineConfProfileCfgEntry ::= SEQUENCE { hwAdslAtucConfDownBitSwapCfg INTEGER, hwAdslAtucConfUpBitSwapCfg INTEGER, hwAdslTrellionsModeEnableCfg INTEGER, hwAdslTransmissionModeCfg INTEGER } hwAdslAtucConfDownBitSwapCfg OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enables and disables the down bitswap of a template. Options: 1. enabled(1) - Indicates that the downstream bit swap is enabled 2. disabled(2) - Indicates that the downstream bit swap is disabled Default: enabled(1) " ::= { hwadslLineConfProfileCfgEntry 1 } hwAdslAtucConfUpBitSwapCfg OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enables and disables the up bitswap of a template. Options: 1. enabled(1) - Indicates that the upstream bit swap is enabled 2. disabled(2) - Indicates that the upstream bit swap is disabled Default: enabled(1) " ::= { hwadslLineConfProfileCfgEntry 2 } hwAdslTrellionsModeEnableCfg OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enables and disables the Trellions mode. Options: 1. enabled(1) - Indicates that the trellis coding is enabled. 2. disabled(2) - Indicates that the trellis coding is disabled. Default: enabled(1) " ::= { hwadslLineConfProfileCfgEntry 3 } hwAdslTransmissionModeCfg OBJECT-TYPE SYNTAX INTEGER { all(1), fullRate(2), gliteOnly(3), t1413Only(4), gdmtOnly(5), ghs(6), g992Dot1(7), g992Dot2(8), g992Dot3(9), g992Dot4(10), g992Dot5(11), adslAllOnly(12), adslAndAdsl2(13) } MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the transmission mode of this channel. Options: 1. all(1) - All (G992.1, G992.2, T1.413)(Default) 2. fullRate(2) - Full rate(G992.1 or T1.413) 3. gliteOnly(3) - G992.2(g.lite) only 4. t1413Only(4) - T1.413 only 5. gdmtOnly(5) - G992.1,G992.3,G992.5,(g.dmt) only 6. ghs(6) - g.hs (G992.1,G992.2,G992.3,G992.4,G992.5,G992.5 is prior) 7. g992Dot1(7) - G992.1 8. g992Dot2(8) - G992.2 9. g992Dot3(9) - G992.3 10. g992Dot4(10) - G992.4 11. g992Dot5(11) - G992.5 12. adslAllOnly(12) - ADSL ALL ONLY 13. adslAndAdsl2(13) - G.992.1,G.992.3,T1.413(Not support) Default: all(1) " ::= { hwadslLineConfProfileCfgEntry 4 } -- hwAdslLinePvcCfgTable hwAdslLinePvcCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF HwAdslLinePvcCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "PVC configuration table of the ADSL port. The indexes of this table are ifIndex,hwAdsllinePvcVpi,and hwAdsllinePvcVci. " ::= { hwAdslMibObjects 5 } hwAdslLinePvcCfgEntry OBJECT-TYPE SYNTAX HwAdslLinePvcCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "PVC configuration table of the ADSL port. The indexes of this entry are ifIndex,hwAdsllinePvcVpi,and hwAdsllinePvcVci. " INDEX { ifIndex, hwAdsllinePvcVpi, hwAdslLinePvcVci } ::= { hwAdslLinePvcCfgTable 1 } HwAdslLinePvcCfgEntry ::= SEQUENCE { hwAdslLinePvcVlanIdCfg Integer32, hwAdslLinePvcPriorityCfg Integer32, hwAdslLinePvcDsBandCfg Integer32, hwAdslLinePvcUsBandCfg Integer32, hwAdslLinePvcMCastEnableCfg INTEGER, hwAdslLinePvcIGMPEnableCfg INTEGER, hwAdslLinePvcIndexCfg Integer32, hwAdslLinePvcConnectTypeCfg INTEGER, hwAdslLinePvcRowStatusCfg RowStatus } hwAdslLinePvcVlanIdCfg OBJECT-TYPE SYNTAX Integer32 (1..4000) MAX-ACCESS read-write STATUS current DESCRIPTION "The VLAN ID of the adsl line PVC. Range: 1-4000 " ::= { hwAdslLinePvcCfgEntry 3 } hwAdslLinePvcPriorityCfg OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "The Priority value of the adsl line PVC. Range: 0-7 Default: 0 " DEFVAL { 0 } ::= { hwAdslLinePvcCfgEntry 4 } hwAdslLinePvcDsBandCfg OBJECT-TYPE SYNTAX Integer32 (0..450) MAX-ACCESS read-write STATUS current DESCRIPTION "The down stream band of the adsl line PVC. Range: 0-450 Default: 0 " DEFVAL { 0 } ::= { hwAdslLinePvcCfgEntry 5 } hwAdslLinePvcUsBandCfg OBJECT-TYPE SYNTAX Integer32 (0..450) MAX-ACCESS read-write STATUS current DESCRIPTION "The up stream band of the adsl line PVC. Range: 0-450 " ::= { hwAdslLinePvcCfgEntry 6 } hwAdslLinePvcMCastEnableCfg OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows the adsl line PVC to support multicast. Options: 1. enable(1) - Indicates that the PVC of the ADSL port is enabled to support the multicast 2. disable(2) - Indicates that the PVC of the ADSL port is disabled to support the multicast Default: disable(2) " DEFVAL { disable } ::= { hwAdslLinePvcCfgEntry 7 } hwAdslLinePvcIGMPEnableCfg OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows the adsl line PVC to support IGMP. Options: 1. enable(1) - Indicates that the PVC of the ADSL port is enabled to support IGMP 2. disable(2) - Indicates that the PVC of the ADSL port is disabled to support IGMP Default: disable(2) " DEFVAL { disable } ::= { hwAdslLinePvcCfgEntry 8 } hwAdslLinePvcIndexCfg OBJECT-TYPE SYNTAX Integer32 (1..8) MAX-ACCESS read-write STATUS current DESCRIPTION "The index of the adsl line PVC. Range: 1-8 " ::= { hwAdslLinePvcCfgEntry 9 } hwAdslLinePvcConnectTypeCfg OBJECT-TYPE SYNTAX INTEGER { auto(0), llc1483B(1), pppoaLLC(2), pppoaVcmux(3), ipoaLLc(4), ipoaVcmux(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "The Connected type of the adsl line PVC Options: 1. auto(0) - The Connected type of the adsl line PVC is auto 2. llc1483B(1) - The Connected type of the adsl line PVC is llc1483B 3. pppoaLLC(2) - The Connected type of the adsl line PVC is pppoaLLC 4. pppoaVcmux(3) - The Connected type of the adsl line PVC is pppoaVcmux 5. ipoaLLc(4) - The Connected type of the adsl line PVC is ipoaLLc 6. ipoaVcmux(5) - The Connected type of the adsl line PVC is ipoaVcmux " ::= { hwAdslLinePvcCfgEntry 10 } hwAdslLinePvcRowStatusCfg OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row status. Add or delete a table item." ::= { hwAdslLinePvcCfgEntry 11 } -- hwadslLineCfgTable hwadslLineCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF HwadslLineCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table includes common attributes describing both ends of the line. The index of this table is ifIndex. " ::= { hwAdslMibObjects 6 } hwadslLineCfgEntry OBJECT-TYPE SYNTAX HwadslLineCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table includes common attributes describing both ends of the line. The index of this entry is ifIndex. " INDEX { ifIndex } ::= { hwadslLineCfgTable 1 } HwadslLineCfgEntry ::= SEQUENCE { hwadslLineExtConfProfileCfg OCTET STRING, hwadslLineDynamicProfileCfg OCTET STRING } hwadslLineExtConfProfileCfg OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this object identifies the row in the ADSL Extend Line Configuration Profile Table, (adslLineExtConfProfileTable), which applies to this ADSL line, and channels if applicable. NULL - indicates that there is no extend line profile bound to this port. Range: 0-32 " ::= { hwadslLineCfgEntry 1 } hwadslLineDynamicProfileCfg OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this object identifies the row in the ADSL Dynamic Profile Table,which applies to this ADSL line, and channels if applicable. NULL - indicates that there is no Dynamic profile bound to this port. Range: 0-32 " ::= { hwadslLineCfgEntry 2 } -- hwAdslLineBitAllocationInfoTable hwAdslLineBitAllocationInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF HwAdslLineBitAllocationInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This hwAdslLineBitAllocationInfoTable contains the detailed bit-allocation information for the current link. This information can be used to determine whether a given sub-carrier loop has sufficient margin to support ADSL data rates, and possibly to determine whether certain specific types of interference or line attenuation exist. The bit allocation information are only valid when the ATU-C is in the C-ACTIVE state. The index of this table is ifIndex." ::= { hwAdslMibObjects 7 } hwAdslLineBitAllocationInfoEntry OBJECT-TYPE SYNTAX HwAdslLineBitAllocationInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This hwAdslLineBitAllocationInfoTable contains the detailed bit-allocation information for the current link. This information can be used to determine whether a given sub-carrier loop has sufficient margin to support ADSL data rates, and possibly to determine whether certain specific types of interference or line attenuation exist. The bit allocation information are only valid when the ATU-C is in the C-ACTIVE state. The index of this entry is ifIndex." INDEX { ifIndex } ::= { hwAdslLineBitAllocationInfoTable 1 } HwAdslLineBitAllocationInfoEntry ::= SEQUENCE { hwAdslLineDownStreamBitsPerFrameInfo Integer32, hwAdslLineUpStreamBitsPerFrameInfo Integer32, hwAdslLineDownStreamBitAllocLowInfo OCTET STRING, hwAdslLineDownStreamBitAllocHighInfo OCTET STRING, hwAdslLineUpStreamBitAllocInfo OCTET STRING } hwAdslLineDownStreamBitsPerFrameInfo OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of bits required per frame in the downstream data path for the current configuration. " ::= { hwAdslLineBitAllocationInfoEntry 1 } hwAdslLineUpStreamBitsPerFrameInfo OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of bits required per frame in the upstream data path for the current configuration. " ::= { hwAdslLineBitAllocationInfoEntry 2 } hwAdslLineDownStreamBitAllocLowInfo OBJECT-TYPE SYNTAX OCTET STRING (SIZE (256)) MAX-ACCESS read-only STATUS current DESCRIPTION "when used to Adsl board This object contains the first 128 downstream sub-carrier bit allocations (sub-carrier # 1-128). This object is 64 bytes in length, where each byte contains 2 sub-carrier values. Byte 1 - 64 Downstream bit allocation (first 128 sub-carriers), one byte for two sub-carriers. 1 Bits 4 - 7 # bits in 1st downstream sub-carrier 1 Bits 0 - 3 # bits in 2nd downstream sub-carrier ... 64 Bits 4 - 7 # bits in 127th downstream sub-carrier 64 Bits 0 - 3 # bits in 128th downstream sub-carrier when used to Adsl2+ board This object contains the first 256 downstream sub-carrier bit allocations (sub-carrier # 1-256). This object is 256 bytes in length, where each byte contains 1 sub-carrier values. Byte 1 - 256 Downstream bit allocation (first 256 sub-carriers), one byte for one sub-carriers. 1 Bits 0 - 7 # bits in 1st downstream sub-carrier ... 255 Bits 0 - 7 # bits in 255th downstream sub-carrier 256 Bits 0 - 7 # bits in 256th downstream sub-carrier " ::= { hwAdslLineBitAllocationInfoEntry 3 } hwAdslLineDownStreamBitAllocHighInfo OBJECT-TYPE SYNTAX OCTET STRING (SIZE (256)) MAX-ACCESS read-only STATUS current DESCRIPTION "when used to Adsl board This object contains the second 128 downstream sub-carrier bit allocations (sub-carrier # 129-256). This object is 64 bytes in length, where each byte contains 2 sub-carrier values. Byte 1 - 64 Downstream bit allocation (second 128 sub-carriers), one byte for two sub-carriers. 1 Bits 4 - 7 # bits in 129th downstream sub-carrier 1 Bits 0 - 3 # bits in 130th downstream sub-carrier ... 64 Bits 4 - 7 # bits in 255th downstream sub-carrier 64 Bits 0 - 3 # bits in 256th downstream sub-carrier when used to Adsl2+ board This object contains the second 256 downstream sub-carrier bit allocations (sub-carrier # 257-512). This object is 256 bytes in length, where each byte contains 1 sub-carrier values. Byte 1 - 256 Downstream bit allocation (second 256 sub-carriers), one byte for one sub-carriers. 1 Bits 0 - 7 # bits in 1st downstream sub-carrier ... 255 Bits 0 - 7 # bits in 255th downstream sub-carrier 256 Bits 0 - 7 # bits in 256th downstream sub-carrier " ::= { hwAdslLineBitAllocationInfoEntry 4 } hwAdslLineUpStreamBitAllocInfo OBJECT-TYPE SYNTAX OCTET STRING (SIZE (64)) MAX-ACCESS read-only STATUS current DESCRIPTION "when used to Adsl board This Object contains 64 upstream sub-carrier bit allocations (sub-carrier # 1-64). This Object is 32 bytes in length, where each byte contains 2 sub-carrier values. Byte 1 - 32 Upstream bit allocation information, total: 32 bytes, one byte for two sub-carriers. 1 Bits 7 - 4 # bits in 1st upstream sub-carrier 1 Bits 3 - 0 # bits in 2nd upstream sub-carrier ... 32 Bits 7 - 4 # bits in 63rd upstream sub-carrier 32 Bits 3 - 0 # bits in 64th upstream sub-carrier when used to Adsl2+ board This Object contains 64 upstream sub-carrier bit allocations (sub-carrier # 1-64). This Object is 64 bytes in length, where each byte contains 1 sub-carrier values. Byte 1 - 64 Upstream bit allocation information, total: 64 bytes, one byte for one sub-carriers. 1 Bits 7 - 0 # bits in 1st upstream sub-carrier ... 64 Bits 7 - 0 # bits in 64th upstream sub-carrier " ::= { hwAdslLineBitAllocationInfoEntry 5 } -- hwXdslPortCfgTable hwXdslPortCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF HwXdslPortCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table includes xDSL(e.g. adsl,g.shdsl,vdsl...)port information. Used to support common attributes of the ADSL, G.SHDSL, and VDSL ports The index of this table is ifIndex. " ::= { hwAdslMibObjects 8 } hwXdslPortCfgEntry OBJECT-TYPE SYNTAX HwXdslPortCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table includes xDSL(e.g. adsl,g.shdsl,vdsl...)port information. Used to support common attributes of the ADSL, G.SHDSL, and VDSL ports The index of this entry is ifIndex. " INDEX { ifIndex } ::= { hwXdslPortCfgTable 1 } HwXdslPortCfgEntry ::= SEQUENCE { hwXdslPortMaxMacLearnCfg Integer32, hwXdslPortRateMonitorThresholdCfg Integer32, hwXdslPortUpThresholdTxRateCfg Gauge32, hwXdslPortDownThresholdTxRateCfg Gauge32, hwXdslPortRateMonitorAlarmEnableCfg INTEGER, hwXdslPortUpTimeCfg Counter32, hwXdslPortNTEPowerStatusCfg INTEGER, hwXdslPortCurrentUpRateCfg Integer32 , hwXdslPortCurrentDownRateCfg Integer32 , hwXdslPortFarEndRunStateCfg INTEGER, hwXdslPortPowerStateCfg INTEGER, hwXdslPortUpCntCfg Unsigned32 , hwXdslPortUpCntAdminStatusCfg INTEGER , hwXdslPortLastUpTimeCfg DateAndTime, hwXdslPortLastDownTimeCfg DateAndTime, hwXdslPortClearUpCntTimeCfg DateAndTime, hwXdslPortRetrainCntCfg Unsigned32 , hwXdslPortLastRetrainReasonCfg Unsigned32, hwXdslPortLoopFlagCfg INTEGER, hwXdslPortUpThresholdCfg Integer32, hwXdslPortDownThresholdCfg Integer32 } hwXdslPortMaxMacLearnCfg OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Set Max MAC count on the xDSL port. Range: 0-255 Default: 255 " DEFVAL { 255 } ::= { hwXdslPortCfgEntry 1 } hwXdslPortRateMonitorThresholdCfg OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "Set Port monitoring rate threshold percent. Including upstream and downstream. Range: 0-100 Default: 0 " DEFVAL { 0 } ::= { hwXdslPortCfgEntry 2 } hwXdslPortUpThresholdTxRateCfg OBJECT-TYPE SYNTAX Gauge32 UNITS "bps" MAX-ACCESS read-write STATUS current DESCRIPTION "Set Port monitoring upstream rate threshold value. Default: 0 Unit:bps " DEFVAL { 0 } ::= { hwXdslPortCfgEntry 3 } hwXdslPortDownThresholdTxRateCfg OBJECT-TYPE SYNTAX Gauge32 UNITS "bps" MAX-ACCESS read-write STATUS current DESCRIPTION "Set Port monitoring downstream rate threshold value. Default: 0 Unit:bps " DEFVAL { 0 } ::= { hwXdslPortCfgEntry 4 } hwXdslPortRateMonitorAlarmEnableCfg OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enables or disables port rate monitor alarm. Options: 1. enabled(1) - Enables port rate monitor alarm 2. disabled(2) - Disables port rate monitor alarm " ::= { hwXdslPortCfgEntry 5 } hwXdslPortUpTimeCfg OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Duration of the xDSL port activation Unit: second " ::= { hwXdslPortCfgEntry 6 } hwXdslPortNTEPowerStatusCfg OBJECT-TYPE SYNTAX INTEGER { on(1), off(2), unknown(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "NTE power status, this object is defaulted off(2). Options: 1. on(1) - NTE power status is on 2. off(2) - NTE power status is off 3. unknown(3) - NTE power is in unknown status " ::= { hwXdslPortCfgEntry 7 } hwXdslPortCurrentUpRateCfg OBJECT-TYPE SYNTAX Integer32 (0..30000) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Xdsl port current upstream value. Range: 0-30000 Default: 0 " ::= { hwXdslPortCfgEntry 8 } hwXdslPortCurrentDownRateCfg OBJECT-TYPE SYNTAX Integer32 (0..30000) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Xdsl port current downstream value. Range: 0-30000 Default: 0 " ::= { hwXdslPortCfgEntry 9 } hwXdslPortFarEndRunStateCfg OBJECT-TYPE SYNTAX INTEGER { unknown(1), noModem(2), handshake(3), showtime(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Remote running status of the xDSL port. This object is defaulted unknown(1). Options: 1. unknown(1) - Unknown status 2. noModem(2) - Port is not connected to modem 3. handshake(3) - Handshake status 4. showtime(4) - Port is activated " ::= { hwXdslPortCfgEntry 10 } hwXdslPortPowerStateCfg OBJECT-TYPE SYNTAX INTEGER { l0(1), l2(2), l3(3), l1(4), invalidValue(-1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Xdsl port power state. Options: 1. l0(1) - Full-on state 2. l2(2) - Low power state 3. l3(3) - Idle state 4. l1(4) - Low power state 5. invalidValue(-1) - Invalid state Default: l0(1) " ::= { hwXdslPortCfgEntry 11 } hwXdslPortUpCntCfg OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The up counts of xDSL port." ::= { hwXdslPortCfgEntry 12 } hwXdslPortUpCntAdminStatusCfg OBJECT-TYPE SYNTAX INTEGER { reset(0) } MAX-ACCESS read-write STATUS current DESCRIPTION "Admin the up counts of xDSL port. Options: 1. reset(0) - Reset the up counts of xDSL port " ::= { hwXdslPortCfgEntry 13 } hwXdslPortLastUpTimeCfg OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Last up time of a xDSL port." ::= { hwXdslPortCfgEntry 14 } hwXdslPortLastDownTimeCfg OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Last down time of a xDSL port." ::= { hwXdslPortCfgEntry 15 } hwXdslPortClearUpCntTimeCfg OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The time when up counts of a xDSL port is cleared." ::= { hwXdslPortCfgEntry 16 } hwXdslPortRetrainCntCfg OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The retrain counts of xDSL Line." ::= { hwXdslPortCfgEntry 17 } hwXdslPortLastRetrainReasonCfg OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The last retrain reson of xDSL Line, coded as bit mask. Only one bit can be set valid, all bits set valid means invalid retrain reason. " ::= { hwXdslPortCfgEntry 18 } hwXdslPortLoopFlagCfg OBJECT-TYPE SYNTAX INTEGER { false(0), true(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Loop flag. Options: 1. false(0) - No loop 2. true (1) - Loop " ::= { hwXdslPortCfgEntry 19 } hwXdslPortUpThresholdCfg OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "Set Port monitoring upstream rate threshold percent value. Range: 0-100 Default: 0 " DEFVAL { 0 } ::= { hwXdslPortCfgEntry 20 } hwXdslPortDownThresholdCfg OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "Set Port monitoring downstream rate threshold percent value. Range: 0-100 Default: 0 " DEFVAL { 0 } ::= { hwXdslPortCfgEntry 21 } -- hwAdslLinePreActParaInfoTable hwAdslLinePreActParaInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF HwAdslLinePreActParaInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides one row for each ADSL PORT. Each row contains the preactived parameters. The index of this table is ifIndex." ::= { hwAdslMibObjects 9 } hwAdslLinePreActParaInfoEntry OBJECT-TYPE SYNTAX HwAdslLinePreActParaInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides one row for each ADSL PORT. Each row contains the preactived parameters. The index of this entry is ifIndex." INDEX { ifIndex } ::= { hwAdslLinePreActParaInfoTable 1 } HwAdslLinePreActParaInfoEntry ::= SEQUENCE { hwAdslAtucPrevSnrMgnInfo Integer32, hwAdslAturPrevSnrMgnInfo Integer32, hwAdslAtucPrevAttainableRateInfo Unsigned32, hwAdslAturPrevAttainableRateInfo Unsigned32, hwAdslAtucPreAtnInfo Gauge32, hwAdslAturPreAtnInfo Gauge32, hwAdslPreActiveTimeInfo DateAndTime } hwAdslAtucPrevSnrMgnInfo OBJECT-TYPE SYNTAX Integer32 UNITS "tenth dB" MAX-ACCESS read-only STATUS current DESCRIPTION "Noise Margin as seen by this ATU-C at the time of the last adslAtucRateChangeTrap event. Unit: tenth dB " ::= { hwAdslLinePreActParaInfoEntry 1 } hwAdslAturPrevSnrMgnInfo OBJECT-TYPE SYNTAX Integer32 UNITS "tenth dB" MAX-ACCESS read-only STATUS current DESCRIPTION "Noise Margin as seen by this ATU-R at the time of the last adslAtucRateChangeTrap event. Unit: tenth dB " ::= { hwAdslLinePreActParaInfoEntry 2 } hwAdslAtucPrevAttainableRateInfo OBJECT-TYPE SYNTAX Unsigned32 UNITS "bps" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the maximum attainable data rate by the ATU-C at the time of the last adslAtucRateChangeTrap event. Unit: bps " ::= { hwAdslLinePreActParaInfoEntry 3 } hwAdslAturPrevAttainableRateInfo OBJECT-TYPE SYNTAX Unsigned32 UNITS "bps" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the maximum attainable data rate by the ATU-R at the time of the last adslAtucRateChangeTrap event. Unit: bps " ::= { hwAdslLinePreActParaInfoEntry 4 } hwAdslAtucPreAtnInfo OBJECT-TYPE SYNTAX Gauge32 UNITS "tenth dB" MAX-ACCESS read-only STATUS current DESCRIPTION "Measured difference in the total power transmitted as seen by this ATU-C at the time of the last adslAtucRateChangeTrap event. Unit: tenth dB " ::= { hwAdslLinePreActParaInfoEntry 5 } hwAdslAturPreAtnInfo OBJECT-TYPE SYNTAX Gauge32 UNITS "tenth dB" MAX-ACCESS read-only STATUS current DESCRIPTION "Measured difference in the total power transmitted as seen by this ATU-R at the time of the last adslAtucRateChangeTrap event. Unit: tenth dB " ::= { hwAdslLinePreActParaInfoEntry 6 } hwAdslPreActiveTimeInfo OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The last time at that the port was activated." ::= { hwAdslLinePreActParaInfoEntry 7 } -- hwPortThreePriorityCfgTable hwPortThreePriorityCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF HwPortThreePriorityCfgEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "Adsl port three priority table. The index of this table is ifIndex. " ::= { hwAdslMibObjects 10 } hwPortThreePriorityCfgEntry OBJECT-TYPE SYNTAX HwPortThreePriorityCfgEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "Adsl port three priority table. The index of this entry is ifIndex. " INDEX { ifIndex } ::= { hwPortThreePriorityCfgTable 1 } HwPortThreePriorityCfgEntry ::= SEQUENCE { hwPortThreePriorityEnableCfg INTEGER } hwPortThreePriorityEnableCfg OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Three Priority status of the interface. Options: 1. enable(1) - Adsl port three priority is enabled 2. disable(2) - Adsl port three priority is disabled " ::= { hwPortThreePriorityCfgEntry 1 } -- hwSlotMacMaxNoLimitCfgTable hwSlotMacMaxNoLimitCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF HwSlotMacMaxNoLimitCfgEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "Max mac learning no limit table. The indexes of this table are hwFrameIndex and hwSlotIndex. " ::= { hwAdslMibObjects 11 } hwSlotMacMaxNoLimitCfgEntry OBJECT-TYPE SYNTAX HwSlotMacMaxNoLimitCfgEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "Max mac learning no limit table. The indexes of this entry are hwFrameIndex and hwSlotIndex. " INDEX { hwFrameIndex, hwSlotIndex } ::= { hwSlotMacMaxNoLimitCfgTable 1 } HwSlotMacMaxNoLimitCfgEntry ::= SEQUENCE { hwSlotMacMaxNoLimitEnableCfg INTEGER } hwSlotMacMaxNoLimitEnableCfg OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS obsolete DESCRIPTION "This object is used to set whether all the ports in the slot limits the maximum number of learning MAC addresses. Options: 1. enable(1) - Don't limit the max NO. of learning mac addresses in the slot 2. disable(2) - Limit the max NO. of learning mac addresses in the slot " ::= { hwSlotMacMaxNoLimitCfgEntry 1 } -- hwXdslPortStateStatisticInfoTable hwXdslPortStateStatisticInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF HwXdslPortStateStatisticInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "XDSL port state staticstic table. Used to support the statistics information about the status mapping and status of ports on service boards, such as the ADSL, G.SHDSL, and VDSL boards The indexes of this table are ifType, hwFrameIndex, hwSlotIndex. " ::= { hwAdslMibObjects 12 } hwXdslPortStateStatisticInfoEntry OBJECT-TYPE SYNTAX HwXdslPortStateStatisticInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "XDSL port state staticstic table. Used to support the statistics information about the status mapping and status of ports on service boards, such as the ADSL, G.SHDSL, and VDSL boards The indexes of this entry are ifType, hwFrameIndex, hwSlotIndex. " INDEX { ifType, hwFrameIndex, hwSlotIndex } ::= { hwXdslPortStateStatisticInfoTable 1 } HwXdslPortStateStatisticInfoEntry ::= SEQUENCE{ hwXdslPortStatePortNumberInfo Unsigned32, hwXdslPortStateBitmapListInfo OCTET STRING, hwXdslTotalOfActivatedPortsInfo Unsigned32, hwXdslTotalOfDeactivatedPortsInfo Unsigned32, hwXdslTotalOfActivatingPortsInfo Unsigned32, hwXdslTotalOfTestingPortsInfo Unsigned32, hwXdslTotalOfBlockedPortsInfo Unsigned32, hwXdslTotalOfLocalLoopbackPortsInfo Unsigned32, hwXdslTotalOfRemoteLoopbackPortsInfo Unsigned32, hwXdslTotalOfFailedPortsInfo Unsigned32, hwXdslTotalOfUnknownPortsInfo Unsigned32 } hwXdslPortStatePortNumberInfo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object is port number of one slot." ::= { hwXdslPortStateStatisticInfoEntry 1 } hwXdslPortStateBitmapListInfo OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The type of port status: 2 failed; 8 testing; 9 activated; 10 activating; 11 deactivated; 18 localloopback; 19 remoteloopback; 20 blocked; 37 utopialoopback; 38 afeloopback; 39 hybridloopback; 255 unknown; The hwXdslPortStateBitmapListInfo describes the states of all ports. Every byte describe the current state of every port. The length is equal to the value of the hwXdslPortStatePortNumberInfo. " ::= { hwXdslPortStateStatisticInfoEntry 2 } hwXdslTotalOfActivatedPortsInfo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total of the activated ports." ::= { hwXdslPortStateStatisticInfoEntry 3 } hwXdslTotalOfDeactivatedPortsInfo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total of the deactivated ports." ::= { hwXdslPortStateStatisticInfoEntry 4 } hwXdslTotalOfActivatingPortsInfo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total of the activating ports." ::= { hwXdslPortStateStatisticInfoEntry 5 } hwXdslTotalOfTestingPortsInfo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total of the Testing ports." ::= { hwXdslPortStateStatisticInfoEntry 6 } hwXdslTotalOfBlockedPortsInfo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total of the blocked ports." ::= { hwXdslPortStateStatisticInfoEntry 7 } hwXdslTotalOfLocalLoopbackPortsInfo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total of the local testing ports." ::= { hwXdslPortStateStatisticInfoEntry 8 } hwXdslTotalOfRemoteLoopbackPortsInfo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total of the remote testing ports." ::= { hwXdslPortStateStatisticInfoEntry 9 } hwXdslTotalOfFailedPortsInfo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total of the failed ports." ::= { hwXdslPortStateStatisticInfoEntry 10 } hwXdslTotalOfUnknownPortsInfo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total of the unknown xDSL ports." ::= { hwXdslPortStateStatisticInfoEntry 11 } -- hwadslLineExtConfProfileCfgTable hwadslLineExtConfProfileCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF HwadslLineExtConfProfileCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains information on the ADSL extend line configuration. One entry in this table reflects a extend line profile defined by a manager which can be used to configure the ADSL line. The index of this table is hwadslLineExtConfProfileNameCfg. " ::= { hwAdslMibObjects 13 } hwadslLineExtConfProfileCfgEntry OBJECT-TYPE SYNTAX HwadslLineExtConfProfileCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains information on the ADSL extend line configuration. One entry in this table reflects a extend line profile defined by a manager which can be used to configure the ADSL line. The index of this entry is hwadslLineExtConfProfileNameCfg. " INDEX {IMPLIED hwadslLineExtConfProfileNameCfg } ::= { hwadslLineExtConfProfileCfgTable 1 } HwadslLineExtConfProfileCfgEntry ::= SEQUENCE { hwadslLineExtConfProfileNameCfg OCTET STRING, hwadslLineDisableToneSection1BeginCfg Integer32, hwadslLineDisableToneSection1EndCfg Integer32, hwadslLineDisableToneSection1FlagCfg INTEGER, hwadslLineDisableToneSection2BeginCfg Integer32, hwadslLineDisableToneSection2EndCfg Integer32, hwadslLineDisableToneSection2FlagCfg INTEGER, hwadslLineDisableToneSection3BeginCfg Integer32, hwadslLineDisableToneSection3EndCfg Integer32, hwadslLineDisableToneSection3FlagCfg INTEGER, hwadslLineDisableToneSection4BeginCfg Integer32, hwadslLineDisableToneSection4EndCfg Integer32, hwadslLineDisableToneSection4FlagCfg INTEGER, hwadsl2ChConfProfMinProtectionDsCfg HWADSLSYMBOLPROTECTION, hwadsl2ChConfProfMinProtectionUsCfg HWADSLSYMBOLPROTECTION, hwAdslExtDsMinTrainSnrMgnCfg Integer32, hwAdslExtUsMinTrainSnrMgnCfg Integer32, hwAdslExtDsMaxPsdCfg Integer32, hwadsl2TSSiPsdMaskDsCfg Adsl2PsdMaskDs, hwadsl2TranMissionStardardMaskCfg Unsigned32, hwadsl2TransMissionAnnexMaskCfg Unsigned32, hwadsl2TransMissionAnnexMScopeCfg HWADSL2ANNEXMSCOPE, hwadsl2L2ModeStateCfg INTEGER, hwadsl2L2ModeMinDataRateCfg Integer32, hwadsl2L2ModeMaxDataRateCfg Integer32, hwadsl2L2ModePayloadRateThresholdCfg Integer32, hwadsl2L2ModeGuardTimeCfg Integer32, hwadsl2L2ModeIntervalTimeCfg Integer32, hwadsl2L2ModeIntervalPowerValueCfg Integer32, hwadsl2L2ModeTotalPowerValueCfg Integer32, hwadslExtUsPhyRcontrolCfg INTEGER, hwadslExtUsINPmaxCfg Adsl2SymbolProtection, hwadslExtUsMinRtxRatioCfg Integer32, hwadslExtUsMinRSoverheadCfg Integer32, hwadslExtDsPhyRcontrolCfg INTEGER, hwadslExtDsINPmaxCfg Adsl2SymbolProtection, hwadslExtDsMinRtxRatioCfg Integer32, hwadslExtDsMinRSoverheadCfg Integer32, hwadsl2TSSiPsdMaskUsCfg Adsl2PsdMaskUs, hwadslLConfProfAdslModeCfg INTEGER, hwadslLineExtConfProfileRowStatusCfg RowStatus, hwadsl2L2ModeL2TimeCfg Integer32, hwadslLineExtConfProfRtxModeDs INTEGER, hwadslLineExtConfProfLeftrThreshDs Unsigned32, hwadslLineExtConfProfMinEtrRtxDs Unsigned32, hwadslLineExtConfProfMaxEtrRtxDs Unsigned32, hwadslLineExtConfProfMaxNdrRtxDs Unsigned32, hwadslLineExtConfProfMaxDelayRtxDs Unsigned32, hwadslLineExtConfProfMinDelayRtxDs Unsigned32, hwadslLineExtConfProfMinInpShineRtxDs Unsigned32, hwadslLineExtConfProfShineRatioRtxDs Unsigned32, hwadslLineExtConfProfMinInpReinRtxDs Unsigned32, hwadslLineExtConfProfIatReinRtxDs INTEGER, hwadsl2LExtLineProfReferenceClock INTEGER, hwadsl2LExtLineProfRfiBands OCTET STRING, hwadsl2LExtLineProfDpboEPsd OCTET STRING, hwadsl2LExtLineProfDpboEsEL Unsigned32, hwadsl2LExtLineProfDpboEselMin Unsigned32, hwadsl2LExtLineProfDpboEsCableModelA Unsigned32, hwadsl2LExtLineProfDpboEsCableModelB Unsigned32, hwadsl2LExtLineProfDpboEsCableModelC Unsigned32, hwadsl2LExtLineProfDpboMus Unsigned32, hwadsl2LExtLineProfDpboFMin Unsigned32, hwadsl2LExtLineProfDpboFMax Unsigned32, hwadsl2LExtLineProfMaxNomPsdUs Integer32, hwadsl2LExtLineProfMaxNomAtpDs Unsigned32, hwadsl2LExtLineProfMaxNomAtpUs Unsigned32, hwadsl2LExtLineProfInmIatoDs Unsigned32, hwadsl2LExtLineProfInmIatsDs Unsigned32, hwadsl2LExtLineProfInmCcDs Unsigned32, hwadsl2LExtLineProfInmInpeqModeDs Unsigned32, hwadsl2LExtLineProfForceInpDs TruthValue, hwadsl2LExtLineProfForceInpUs TruthValue, hwadsl2LExtLineProfInitPolicy INTEGER, hwadsl2LExtLineProfL3Time Unsigned32, hwadsl2LExtLineProfL3ModeState INTEGER } hwadslLineExtConfProfileNameCfg OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object is used by the hwadslLineExtConfProfileTable in order to identify a row of this table. Indicates the name of the extended line profile. " ::= { hwadslLineExtConfProfileCfgEntry 1 } hwadslLineDisableToneSection1BeginCfg OBJECT-TYPE SYNTAX Integer32(0..511) MAX-ACCESS read-create STATUS current DESCRIPTION "The begin index of the first section. Range: 0-511 " ::= { hwadslLineExtConfProfileCfgEntry 2 } hwadslLineDisableToneSection1EndCfg OBJECT-TYPE SYNTAX Integer32(0..511) MAX-ACCESS read-create STATUS current DESCRIPTION "The end index of the first section. Range: 0-511 " ::= { hwadslLineExtConfProfileCfgEntry 3 } hwadslLineDisableToneSection1FlagCfg OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The enable flag of the first section. Options: 1. enabled(1) - The first tone section is enabled 2. disabled(2) - The first tone section is disabled " ::= { hwadslLineExtConfProfileCfgEntry 4 } hwadslLineDisableToneSection2BeginCfg OBJECT-TYPE SYNTAX Integer32(0..511) MAX-ACCESS read-create STATUS current DESCRIPTION "The begin index of the second section. Range: 0-511 " ::= { hwadslLineExtConfProfileCfgEntry 5 } hwadslLineDisableToneSection2EndCfg OBJECT-TYPE SYNTAX Integer32(0..511) MAX-ACCESS read-create STATUS current DESCRIPTION "The end index of the second section. Range: 0-511 " ::= { hwadslLineExtConfProfileCfgEntry 6 } hwadslLineDisableToneSection2FlagCfg OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The enable flag of the second section. Options: 1. enabled(1) - The second tone section is enabled 2. disabled(2) - The second tone section is disabled " ::= { hwadslLineExtConfProfileCfgEntry 7 } hwadslLineDisableToneSection3BeginCfg OBJECT-TYPE SYNTAX Integer32(0..511) MAX-ACCESS read-create STATUS current DESCRIPTION "The begin index of the third section. Range: 0-511 " ::= { hwadslLineExtConfProfileCfgEntry 8 } hwadslLineDisableToneSection3EndCfg OBJECT-TYPE SYNTAX Integer32(0..511) MAX-ACCESS read-create STATUS current DESCRIPTION "The end index of the third section. Range: 0-511 " ::= { hwadslLineExtConfProfileCfgEntry 9 } hwadslLineDisableToneSection3FlagCfg OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The enable flag of the third section. Options: 1. enabled(1) - The third tone section is enabled 2. disabled(2) - The third tone section is disabled " ::= { hwadslLineExtConfProfileCfgEntry 10 } hwadslLineDisableToneSection4BeginCfg OBJECT-TYPE SYNTAX Integer32(0..511) MAX-ACCESS read-create STATUS current DESCRIPTION "The begin index of the fourth section. Range: 0-511 " ::= { hwadslLineExtConfProfileCfgEntry 11 } hwadslLineDisableToneSection4EndCfg OBJECT-TYPE SYNTAX Integer32(0..511) MAX-ACCESS read-create STATUS current DESCRIPTION "The end index of the fourth section. Range: 0-511 " ::= { hwadslLineExtConfProfileCfgEntry 12 } hwadslLineDisableToneSection4FlagCfg OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The enable flag of the fourth section. Options: 1. enabled(1) - The fourth tone section is enabled 2. disabled(2) - The fourth tone section is disabled " ::= { hwadslLineExtConfProfileCfgEntry 13 } hwadsl2ChConfProfMinProtectionDsCfg OBJECT-TYPE SYNTAX HWADSLSYMBOLPROTECTION MAX-ACCESS read-write STATUS current DESCRIPTION "If retransmission is not used in downstream direction,this parameter is minimum impulse noise protection on downstream direction. The minimum impulse noise protection for the bearer channel, expressed in symbols. The parameter can take the following values: noProtection(0), halfSymbol(1), singleSymbol(2), twoSymbols(4), threeSymbols(6), fourSymbols(8), fiveSymbols(10), sixSymbols(12), sevenSymbols(14), eightSymbols(16), nineSymbols(18), tenSymbols(20), elevenSymbols(22), twelveSymbols(24), thirteenSymbols(26), fourteenSymbols(28), fifteenSymbols(30), sixteenSymbols(32), null(65535) The value multiply 1/2 is the real value of Noise Protection values. " ::= { hwadslLineExtConfProfileCfgEntry 14 } hwadsl2ChConfProfMinProtectionUsCfg OBJECT-TYPE SYNTAX HWADSLSYMBOLPROTECTION MAX-ACCESS read-write STATUS current DESCRIPTION "If retransmission is not used in upstream direction,this parameter is minimum impulse noise protection on upstream direction. The minimum impulse noise protection for the bearer channel, expressed in symbols. The parameter can take the following values: noProtection(0), halfSymbol(1), singleSymbol(2), twoSymbols(4), threeSymbols(6), fourSymbols(8), fiveSymbols(10), sixSymbols(12), sevenSymbols(14), eightSymbols(16), nineSymbols(18), tenSymbols(20), elevenSymbols(22), twelveSymbols(24), thirteenSymbols(26), fourteenSymbols(28), fifteenSymbols(30), sixteenSymbols(32), null(65535) The value multiply 1/2 is the real value of Noise Protection values. " ::= { hwadslLineExtConfProfileCfgEntry 15 } hwAdslExtDsMinTrainSnrMgnCfg OBJECT-TYPE SYNTAX Integer32 (0..310) UNITS "tenth dB" MAX-ACCESS read-create STATUS current DESCRIPTION "Maximum Trainning Margin in downstream. Range: 0-310 Default: 30 Unit: tenth dB " DEFVAL { 30 } ::= { hwadslLineExtConfProfileCfgEntry 16 } hwAdslExtUsMinTrainSnrMgnCfg OBJECT-TYPE SYNTAX Integer32 (0..310) UNITS "tenth dB" MAX-ACCESS read-create STATUS current DESCRIPTION "Maximum Trainning Margin in upstream. Range: 0-310 Default: 30 Unit: tenth dB " DEFVAL { 30 } ::= { hwadslLineExtConfProfileCfgEntry 17 } hwAdslExtDsMaxPsdCfg OBJECT-TYPE SYNTAX Integer32 (-60..-30) UNITS "dBm/Hz" MAX-ACCESS read-create STATUS current DESCRIPTION "Maximum PSD margin in downstream." DEFVAL { -40 } ::= { hwadslLineExtConfProfileCfgEntry 18 } hwadsl2TSSiPsdMaskDsCfg OBJECT-TYPE SYNTAX Adsl2PsdMaskDs MAX-ACCESS read-write STATUS current DESCRIPTION "The downstream PSD mask applicable at the U-C2 reference point. This parameter is used only for G992.3 or G992.5 and it may impose PSD restrictions (breakpoints) in addition to the Limit PSD mask defined in G992.5. This is a string of 32 pairs of values in the following structure: Octets 0-1 - Index of 1st sub-carrier used in the context of a first breakpoint. Octet 2 - The PSD reduction for the sub-carrier indicated in octets 0 and 1. Octets 3-5 - Same, for a 2nd breakpoint. Octets 6-8 - Same, for a 3rd breakpoint. This architecture continues until octets 94-95, which are associated with a 32nd breakpoint. Each subcarrier index is an unsigned number in the range 1 and NSCds. Each PSD reduction value is in the range 0 (0dBm/Hz) to 255 (-127.5dBm/Hz) with steps of 0.5dBm/Hz. Valid values are in the range 0 to 190 (0 to -95dBm/Hz). When the number of breakpoints is less than 32, all remaining octets are set to the value 0. Note that the content of this object should be correlated with the sub-carriers mask and with the RFI setup. " REFERENCE "ITU-T G.997.1, paragraph 7.3.1.2" ::= { hwadslLineExtConfProfileCfgEntry 19 } hwadsl2TranMissionStardardMaskCfg OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The transmission stardard mask . The Mask bit and the corresponding Transmission Standard: 0x 1 1 1 1 1 1 ETSI T1.413 G992.5 G992.3 G992.2 G992.1 The Default BitMask: 0X0. " ::= { hwadslLineExtConfProfileCfgEntry 20 } hwadsl2TransMissionAnnexMaskCfg OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The transMission annex Mask. The Mask bit and the corresponding Transmission Annex: 0x 1 1 1 1 1 Annex .J Annex .M Annex .L Annex .B Annex .A The Default BitMask: 0X0. " ::= { hwadslLineExtConfProfileCfgEntry 21 } hwadsl2TransMissionAnnexMScopeCfg OBJECT-TYPE SYNTAX HWADSL2ANNEXMSCOPE MAX-ACCESS read-create STATUS current DESCRIPTION "Annex M expand scope: 1-Tone Index(7~32) 2-Tone Index(7~36) 3-Tone Index(7~40) 4-Tone Index(7~44) 5-Tone Index(7~48) 6-Tone Index(7~52) 7-Tone Index(7~56) 8-Tone Index(7~60) 9-Tone Index(7~64) -1-invalidValue " ::= { hwadslLineExtConfProfileCfgEntry 22 } hwadsl2L2ModeStateCfg OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2), forced(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "The state of L2 power management mode. Options: 1. disabled(1) - The L2 power management mode is disabled 2. enabled(2) - The L2 power management mode is enabled 3. forced(3) - The L2 power management mode is forced Default: disabled(1) " DEFVAL { disabled } ::= { hwadslLineExtConfProfileCfgEntry 23 } hwadsl2L2ModeMinDataRateCfg OBJECT-TYPE SYNTAX Integer32 (128..16384) UNITS "Kbps" MAX-ACCESS read-create STATUS current DESCRIPTION "Minimum data rate in L2 mode. Range: 128-16384 Default: 256 Unit: Kbps " DEFVAL { 256 } ::= { hwadslLineExtConfProfileCfgEntry 24 } hwadsl2L2ModeMaxDataRateCfg OBJECT-TYPE SYNTAX Integer32 (128..16384) UNITS "Kbps" MAX-ACCESS read-create STATUS current DESCRIPTION "Maximum data rate in L2 mode. Range: 128-16384 Default: 1024 Unit: Kbps " DEFVAL { 1024 } ::= { hwadslLineExtConfProfileCfgEntry 25 } hwadsl2L2ModePayloadRateThresholdCfg OBJECT-TYPE SYNTAX Integer32 (128..16384) UNITS "Kbps" MAX-ACCESS read-create STATUS current DESCRIPTION "Threshold for the Payload Rate Ratio. Range: 128-16384 Default: 128 Unit: Kbps " DEFVAL { 128 } ::= { hwadslLineExtConfProfileCfgEntry 26 } hwadsl2L2ModeGuardTimeCfg OBJECT-TYPE SYNTAX Integer32 (0..1024) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "Guard time before entering L2 mode. Range: 0-1024 Default: 60 Unit: seconds " DEFVAL { 60 } ::= { hwadslLineExtConfProfileCfgEntry 27 } hwadsl2L2ModeIntervalTimeCfg OBJECT-TYPE SYNTAX Integer32 (0..255) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The minimum interval between two records of L2 mode. Range: 0-255 Default: 255 Unit: seconds " DEFVAL { 255 } ::= { hwadslLineExtConfProfileCfgEntry 28 } hwadsl2L2ModeIntervalPowerValueCfg OBJECT-TYPE SYNTAX Integer32 (0..31) UNITS "db" MAX-ACCESS read-create STATUS current DESCRIPTION "Maximum aggregate transmit power reduction per L2 request or L2 power trim. Range: 0-31 Default: 3 Unit: db " DEFVAL { 3 } ::= { hwadslLineExtConfProfileCfgEntry 29 } hwadsl2L2ModeTotalPowerValueCfg OBJECT-TYPE SYNTAX Integer32 (0..31) UNITS "db" MAX-ACCESS read-create STATUS current DESCRIPTION "Total maximum aggregate transmit power reduction in L2. Range: 0-31 Default: 9 Unit: db " DEFVAL { 9 } ::= { hwadslLineExtConfProfileCfgEntry 30 } hwadslExtUsPhyRcontrolCfg OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "To enable or disable the PHY-R function on upstream direction. Options: 1. enable(1) - The PHY-R function on upstream direction is enabled 2. disable(2) - The PHY-R function on upstream direction is disabled Default: disable(2) " DEFVAL { disable } ::= { hwadslLineExtConfProfileCfgEntry 31 } hwadslExtUsINPmaxCfg OBJECT-TYPE SYNTAX Adsl2SymbolProtection UNITS "DMT Symbol" MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum Impulse Noise Protection on upstream direction. The parameter can take the following values: noProtection(1), halfSymbol(2), singleSymbol(3), twoSymbols(4), threeSymbols(5), fourSymbols(6), fiveSymbols(7), sixSymbols(8), sevenSymbols(9), eightSymbols(10), nineSymbols(11), tenSymbols(12), elevenSymbols(13), twelveSymbols(14), thirteenSymbols(15), fourteenSymbols(16), fifteenSymbols(17), sixteenSymbols(18) The value multiply 1/2 is the real value of Noise Protection values. Default: 1 Unit: DMT Symbol " DEFVAL { 1 } ::= { hwadslLineExtConfProfileCfgEntry 32 } hwadslExtUsMinRtxRatioCfg OBJECT-TYPE SYNTAX Integer32 (0..255) UNITS "1/256" MAX-ACCESS read-write STATUS current DESCRIPTION "Minimum rtx ratio on upstream direction. Range: 0-255 Default: 0 Unit: 1/256 " DEFVAL { 0 } ::= { hwadslLineExtConfProfileCfgEntry 33 } hwadslExtUsMinRSoverheadCfg OBJECT-TYPE SYNTAX Integer32 (0..128) UNITS "1/256" MAX-ACCESS read-write STATUS current DESCRIPTION "The minimum value of R/N on upstream direction. Range: 0-128 Default: 0 Unit: 1/256 " DEFVAL { 0 } ::= { hwadslLineExtConfProfileCfgEntry 34 } hwadslExtDsPhyRcontrolCfg OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "To enable or disable the PHY-R function on downstream direction. Options: 1. enable(1) - The PHY-R function on downstream direction is enabled 2. disable(2) - The PHY-R function on downstream direction is disabled Default: disable(2) " DEFVAL { disable } ::= { hwadslLineExtConfProfileCfgEntry 35 } hwadslExtDsINPmaxCfg OBJECT-TYPE SYNTAX Adsl2SymbolProtection UNITS "DMT Symbol" MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum Impulse Noise Protection on downstream direction. The parameter can take the following values: noProtection(1), halfSymbol(2), singleSymbol(3), twoSymbols(4), threeSymbols(5), fourSymbols(6), fiveSymbols(7), sixSymbols(8), sevenSymbols(9), eightSymbols(10), nineSymbols(11), tenSymbols(12), elevenSymbols(13), twelveSymbols(14), thirteenSymbols(15), fourteenSymbols(16), fifteenSymbols(17), sixteenSymbols(18) The value multiply 1/2 is the real value of Noise Protection values. Default: 1 Unit: DMT Symbol " DEFVAL { 1 } ::= { hwadslLineExtConfProfileCfgEntry 36 } hwadslExtDsMinRtxRatioCfg OBJECT-TYPE SYNTAX Integer32 (0..255) UNITS "1/256" MAX-ACCESS read-write STATUS current DESCRIPTION "Minimum rtx ratio on downstream direction. Range: 0-255 Default: 0 Unit: 1/256 " DEFVAL { 0 } ::= { hwadslLineExtConfProfileCfgEntry 37 } hwadslExtDsMinRSoverheadCfg OBJECT-TYPE SYNTAX Integer32 (0..128) UNITS "1/256" MAX-ACCESS read-write STATUS current DESCRIPTION "The minimum value of R/N on downstream direction. Range: 0-128 Default: 0 Unit: 1/256 " DEFVAL { 0 } ::= { hwadslLineExtConfProfileCfgEntry 38 } hwadsl2TSSiPsdMaskUsCfg OBJECT-TYPE SYNTAX Adsl2PsdMaskUs MAX-ACCESS read-write STATUS current DESCRIPTION "The upstream PSD mask applicable at the U-C2 reference point. This parameter is used only for G992.3 or G992.5 and it may impose PSD restrictions (breakpoints) in addition to the Limit PSD mask defined in G992.5. This is a string of 32 pairs of values in the following structure: Octets 0+1 - Index of 1st sub-carrier used in the context of a first breakpoint. Octet 2 - The PSD reduction for the sub-carrier indicated in octets 0 and 1. Octets 3-5 - Same, for a 2nd breakpoint. Octets 6-8 - Same, for a 3rd breakpoint. This architecture continues until octets 9-11, which are associated with a fourth breakpoint. Each subcarrier index is an unsigned number in the range 1 and NSCus. Each PSD reduction value is in the range 0 (0dBm/Hz) to 255 (-127.5dBm/Hz) with steps of 0.5dBm/Hz. Valid values are in the range 0 to 190 (0 to -95dBm/Hz). When the number of breakpoints is less than 4, all remaining octets are set to the value 0. Note that the content of this object should be correlated with the sub-carriers mask and with the RFI setup. " REFERENCE "ITU-T G.997.1, paragraph 7.3.1.2" ::= { hwadslLineExtConfProfileCfgEntry 39 } hwadslLConfProfAdslModeCfg OBJECT-TYPE SYNTAX INTEGER { defMode (1), adsl (2), adsl2Pots (3), adsl2Isdn (4), adsl2PlusPots (5), adsl2PlusIsdn (6), adsl2ReachExtended (7), invalidValue(-1) } MAX-ACCESS read-write STATUS current DESCRIPTION "The ADSL2 management model specified includes an ADSL Mode attribute which identifies an instance of ADSL Mode-Specific PSD Configuration object in the ADSL Line Profile. The following classes of ADSL operating mode are defined. Options: 1. defMode(1) - ADSL transmit mode is defMode 2. adsl(2) - ADSL transmit mode is adsl 3. adsl2Pots(3) - ADSL transmit mode is adsl2Pots 4. adsl2Isdn(4) - ADSL transmit mode is adsl2Isdn 5. adsl2PlusPots(5) - ADSL transmit mode is adsl2PlusPots 6. adsl2PlusIsdn(6) - ADSL transmit mode is adsl2PlusIsdn 7. adsl2ReachExtended(7) - ADSL transmit mode is adsl2ReachExtended 8. invalidValue(-1) - Invalid value " ::= { hwadslLineExtConfProfileCfgEntry 40 } hwadslLineExtConfProfileRowStatusCfg OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to create a new row or modify or delete an existing row in this table. A profile activated by setting this object to 'active'. When 'active' is set, the system will validate the profile. Before a profile can be deleted or taken out of service, (by setting this object to 'destroy' or 'outOfService') it must be first unreferenced from all associated lines. If the implementator of this MIB has chosen not to implement 'dynamic assignment' of profiles, this object's MIN-ACCESS is read-only and its value is always to be 'active'. " ::= { hwadslLineExtConfProfileCfgEntry 41 } hwadsl2L2ModeL2TimeCfg OBJECT-TYPE SYNTAX Integer32 (0..255) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "This minimum time (in seconds) between an entry into the L2 state and the first power trim in the L2 state and between two consecutive power trims in the L2 State. It ranges from 0 to 255 seconds. Range: 0-255 Default: 30 Unit: seconds " DEFVAL { 30 } ::= { hwadslLineExtConfProfileCfgEntry 42 } hwadslLineExtConfProfRtxModeDs OBJECT-TYPE SYNTAX INTEGER { forbidden(0), preferred(1), forced(2), testmode(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "The mode of operation of G.998.4 retransmission in downstream direction. Options: 1. forbidden(0) - G.998.4 retransmission not allowed. 2. preferred(1) - G.998.4 retransmission is preferred. 3. forced(2) - Force the use of the G.998.4 retransmission. 4. testmode(3) - Force the use of the G.998.4 retransmission in test mode. " REFERENCE "ITU-T G.997.1, paragraph 7.3.1.11" DEFVAL { forbidden } ::= { hwadslLineExtConfProfileCfgEntry 43 } hwadslLineExtConfProfLeftrThreshDs OBJECT-TYPE SYNTAX Unsigned32(0..99) UNITS "0.01" MAX-ACCESS read-create STATUS current DESCRIPTION "If retransmission is used in downstream direction, this parameter specifies the threshold for declaring a near-end leftr defect. The value is coded as a fraction of the NDR with valid range from 0.01 to 0.99 with increments of 0.01. A special value means the ETR shall be used as the default threshold for declaring a leftr defect. " REFERENCE "ITU-T G.997.1, paragraph 7.3.1.12" DEFVAL { 0 } ::= { hwadslLineExtConfProfileCfgEntry 44 } hwadslLineExtConfProfMinEtrRtxDs OBJECT-TYPE SYNTAX Unsigned32(32000..32000000) UNITS "bits/second" MAX-ACCESS read-create STATUS current DESCRIPTION "If retransmission is used in downstream direction, this parameter specifies the minimum expected throughput for the bearer channel.The values range in steps of 1000 bit/s. " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.1.8" ::= { hwadslLineExtConfProfileCfgEntry 45 } hwadslLineExtConfProfMaxEtrRtxDs OBJECT-TYPE SYNTAX Unsigned32(32000..32000000) UNITS "bits/second" MAX-ACCESS read-create STATUS current DESCRIPTION "If retransmission is used in downstream direction, this parameter specifies the maxmum expected throughput for the bearer channel.The values range in steps of 1000 bit/s. " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.1.9" ::= { hwadslLineExtConfProfileCfgEntry 46 } hwadslLineExtConfProfMaxNdrRtxDs OBJECT-TYPE SYNTAX Unsigned32(32000..32000000) UNITS "bits/second" MAX-ACCESS read-create STATUS current DESCRIPTION "If retransmission is used in downstream direction, this parameter specifies the maximum net data rate for the bearer channel. The values range in steps of 1000 bit/s. " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.1.10" ::= { hwadslLineExtConfProfileCfgEntry 47 } hwadslLineExtConfProfMaxDelayRtxDs OBJECT-TYPE SYNTAX Unsigned32(1..63) UNITS "milliseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "If retransmission is used in downstream direction, this parameter specifies the maximum for the instantaneous delay due to the effect of retransmission only (see G.998.4 for detailed specification). The delay ranges from 1 to 63 ms by steps of 1 ms. Unit: milliseconds " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.11" ::= { hwadslLineExtConfProfileCfgEntry 48 } hwadslLineExtConfProfMinDelayRtxDs OBJECT-TYPE SYNTAX Unsigned32(0..63) UNITS "milliseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "If retransmission is used in downstream direction, this parameter specifies the minimum for the instantaneous delay due to the effect of retransmission only (see G.998.4 for detailed specification). The delay ranges from 0 to 63 ms by steps of 1 ms. Unit: milliseconds " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.12" ::= { hwadslLineExtConfProfileCfgEntry 49 } hwadslLineExtConfProfMinInpShineRtxDs OBJECT-TYPE SYNTAX Unsigned32(0..63) UNITS "symbols" MAX-ACCESS read-create STATUS current DESCRIPTION "If retransmission is used in downstream direction, this parameter specifies the minimum impulse noise protection against SHINE for the bearer channel if it is transported over DMT symbols with a subcarrier spacing of 4.3125 kHz. The impulse noise protection is expressed in DMT symbols with a subcarrier spacing of 4.3125 kHz and can take any integer value from 0 to 63, inclusive. Unit: symbols " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.13" DEFVAL { 0 } ::= { hwadslLineExtConfProfileCfgEntry 50 } hwadslLineExtConfProfShineRatioRtxDs OBJECT-TYPE SYNTAX Unsigned32(0..100) MAX-ACCESS read-create STATUS current DESCRIPTION "If retransmission is used in downstream direction, this parameter specifies the SHINE ratio (detailed definition see G.998.4). The values range from 0 to 0.100 in increments of 0.001. " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.15" DEFVAL { 0 } ::= { hwadslLineExtConfProfileCfgEntry 51 } hwadslLineExtConfProfMinInpReinRtxDs OBJECT-TYPE SYNTAX Unsigned32(0..7) MAX-ACCESS read-create STATUS current DESCRIPTION "If retransmission is used in downstream direction, this parameter specifies the minimum impulse noise protection against REIN for the bearer channel if it is transported over DMT symbols with a subcarrier spacing of 4.3125 kHz. The impulse noise protection is expressed in DMT symbols with a subcarrier spacing of 4.3125 kHz and can take any integer value from 0 to 7, inclusive. " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.16" DEFVAL { 0 } ::= { hwadslLineExtConfProfileCfgEntry 52 } hwadslLineExtConfProfIatReinRtxDs OBJECT-TYPE SYNTAX INTEGER { frequency100Hz(0), frequency120Hz(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "If retransmission is used in downstream direction, this parameter specifies the inter-arrival time that shall be assumed for REIN protection. Options: 1. frequency100Hz(0) - an inter-arrival time derived from a REIN at 100 Hz 2. frequency120Hz(1) - an inter-arrival time derived from a REIN at 120 Hz " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.18" DEFVAL { frequency100Hz } ::= { hwadslLineExtConfProfileCfgEntry 53 } hwadsl2LExtLineProfReferenceClock OBJECT-TYPE SYNTAX INTEGER { freeRun(1), system(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object configures the clock reference for the ATU-C in an ADSL line. Represented as an enumeration. Options: 1. freeRun(1) - Indicates the local clock 2. system(2) - Indicates the system clock " DEFVAL { freeRun } ::= { hwadslLineExtConfProfileCfgEntry 54 } hwadsl2LExtLineProfRfiBands OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..16)) MAX-ACCESS read-create STATUS current DESCRIPTION "The RFI notch parameter. It is a string consist of begin tone index, end tone index. This is a string of 4 groups of values in the following structure: Octets 0+1 - Index of start sub-carrier used in the context of a first group Octets 2+3 - Index of end sub-carrier used in the context of a first group Octets 4-7 - Same, for a 2nd group This architecture continues until octets 12-15, which are associated with a 4th group.It can contain as most as 4 groups. " ::= { hwadslLineExtConfProfileCfgEntry 55 } hwadsl2LExtLineProfDpboEPsd OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..48)) MAX-ACCESS read-create STATUS current DESCRIPTION "This parameter defines the PSD mask that is assumed to be permitted at the exchange. This parameter shall use the same format as PSDMASKds.The maximum number of breakpoints for DPBOEPSD is 16. This is a string of 16 pairs of values in the following structure: Octets 0+1 - Index of 1st sub-carrier used in the context of a first breakpoint. Octet 2 - The PSD reduction for the sub-carrier indicated in octets 0 and 1 Octets 3-5 - Same, for a 2nd breakpoint Octets 6-8 - Same, for a 3rd breakpoint This architecture continues until octets 45-47, which are associated with a 16th breakpoint. Each subcarrier index is an unsigned number in the range 1 and NSCds. Each PSD reduction value is in the range 0 (0dBm/Hz) to 255 (-127.5dBm/Hz) with steps of 0.5dBm/Hz. Valid values are in the range 0 to 190 (0 to -95dBm/Hz). When the number of breakpoints is less than 16, all remaining octets are set to the value 0xff. " REFERENCE "ITU-T G.997.1(200604), paragraph 7.3.1.2.13" ::= { hwadslLineExtConfProfileCfgEntry 56 } hwadsl2LExtLineProfDpboEsEL OBJECT-TYPE SYNTAX Unsigned32 (0..511) UNITS "0.5dB" MAX-ACCESS read-create STATUS current DESCRIPTION "This configuration parameter defines the assumed electrical length of cables (E-side cables) connecting exchange based DSL services to a remote flexibility point (cabinet), that hosts the xTU-C that is subject to spectrally shaped downstream power back-off depending on this length. For this parameter the electrical length is defined as the loss (in dB) of an equivalent length of hypothetical cable at a reference frequency defined by the network operator or in spectrum management regulations. DPBOESEL shall be coded as an unsigned integer representing an electrical length from 0 dB (coded as 0) to 255.5 dB (coded as 511) in steps of 0.5 dB. All values in the range are valid.If DPBOESEL is set to zero, the DPBO in this section shall be disabled. " REFERENCE "ITU-T G.997.1(200604), paragraph 7.3.1.2.13" DEFVAL { 0 } ::= { hwadslLineExtConfProfileCfgEntry 57 } hwadsl2LExtLineProfDpboEselMin OBJECT-TYPE SYNTAX Unsigned32 (0..511) UNITS "0.5dB" MAX-ACCESS read-create STATUS current DESCRIPTION "DPBOESELMIN in dB is the minimum of all main cable losses for the KVz supplied when using the SOL model (expansion of a KVz and ADSL2 provision of additional KVz areas from this KVz using cross-cables to additional KVz), including the KVz at the MSAN site. This value must be adjustable as the minimum requirement via the SNMP interface in the configuration profile for each ADSL2 port, and is set individually for each MSAN site and usage. As an option, adjustment can be done for each MSAN or line card, thus taking effect for entire port groups. It is used only for determining the MUF. " DEFVAL { 0 } ::= { hwadslLineExtConfProfileCfgEntry 58 } hwadsl2LExtLineProfDpboEsCableModelA OBJECT-TYPE SYNTAX Unsigned32 (0..640) MAX-ACCESS read-create STATUS current DESCRIPTION "This configuration parameter defines a cable model in terms of three scalars DPBOESCMA, DPBOESCMB and DPBOESCMC that shall be used to describe the frequency dependent loss of E-side cables.Parameters DPBOESCMA, DPBOESCMB, DPBOESCMC shall be coded as unsigned integers representing a scalar value from -1 (coded as 0) to 1.5 (coded as 640) in step of 1/256. All values in the range are valid. " REFERENCE "ITU-T G.997.1(200604), paragraph 7.3.1.2.13" DEFVAL { 256 } ::= { hwadslLineExtConfProfileCfgEntry 59 } hwadsl2LExtLineProfDpboEsCableModelB OBJECT-TYPE SYNTAX Unsigned32 (0..640) MAX-ACCESS read-create STATUS current DESCRIPTION "This configuration parameter defines a cable model in terms of three scalars DPBOESCMA, DPBOESCMB and DPBOESCMC that shall be used to describe the frequency dependent loss of E-side cables.Parameters DPBOESCMA, DPBOESCMB, DPBOESCMC shall be coded as unsigned integers representing a scalar value from -1 (coded as 0) to 1.5 (coded as 640) in step of 1/256. All values in the range are valid. " REFERENCE "ITU-T G.997.1(200604), paragraph 7.3.1.2.13" DEFVAL { 512 } ::= { hwadslLineExtConfProfileCfgEntry 60 } hwadsl2LExtLineProfDpboEsCableModelC OBJECT-TYPE SYNTAX Unsigned32 (0..640) MAX-ACCESS read-create STATUS current DESCRIPTION "This configuration parameter defines a cable model in terms of three scalars DPBOESCMA, DPBOESCMB and DPBOESCMC that shall be used to describe the frequency dependent loss of E-side cables.Parameters DPBOESCMA, DPBOESCMB, DPBOESCMC shall be coded as unsigned integers representing a scalar value from -1 (coded as 0) to 1.5 (coded as 640) in step of 1/256. All values in the range are valid. " REFERENCE "ITU-T G.997.1(200604), paragraph 7.3.1.2.13" DEFVAL { 256 } ::= { hwadslLineExtConfProfileCfgEntry 61 } hwadsl2LExtLineProfDpboMus OBJECT-TYPE SYNTAX Unsigned32 (0..255) UNITS "0.5dBm/Hz" MAX-ACCESS read-create STATUS current DESCRIPTION "DPBOMUS defines the assumed minimum usable receive signal PSD (in dBm/Hz) for exchange based services, used to modify parameter DPBOFMAX defined below. It shall be coded as an unsigned integer representing a PSD level from 0 dBm/Hz (coded as 0) to -127.5 dBm/Hz (coded as 255) in steps of 0.5 dBm/Hz. All values in the range are valid. " REFERENCE "ITU-T G.997.1(200604), paragraph 7.3.1.2.13" DEFVAL { 180 } ::= { hwadslLineExtConfProfileCfgEntry 62 } hwadsl2LExtLineProfDpboFMin OBJECT-TYPE SYNTAX Unsigned32 (0..511) UNITS "4.3125 KHz" MAX-ACCESS read-create STATUS current DESCRIPTION "DPBOFMIN defines the minimum frequency from which the DPBO shall be applied. It shall be coded as a 16 bits unsigned integer representing a frequency in multiple of 4.3125 KHz. The range of valid values is from 0 kHz (coded as 0) to 2203.6875 kHz (coded as 511). " REFERENCE "ITU-T G.997.1(200604), paragraph 7.3.1.2.13" DEFVAL { 0 } ::= { hwadslLineExtConfProfileCfgEntry 63 } hwadsl2LExtLineProfDpboFMax OBJECT-TYPE SYNTAX Unsigned32 (32..511) UNITS "4.3125 KHz" MAX-ACCESS read-create STATUS current DESCRIPTION "DPBOFMAX defines the maximum frequency at which DPBO may be applied. It shall be coded as a 16 bits unsigned integer representing a frequency in multiple of 4.3125 KHz. The range of valid values is from 138 kHz (coded as 32) to 2203.6875 kHz (coded as 511). " REFERENCE "ITU-T G.997.1(200604), paragraph 7.3.1.2.13" DEFVAL { 511 } ::= { hwadslLineExtConfProfileCfgEntry 64 } hwadsl2LExtLineProfMaxNomPsdUs OBJECT-TYPE SYNTAX Integer32 (-60..-30) UNITS "dBm/Hz" MAX-ACCESS read-create STATUS current DESCRIPTION "Maximum PSD margin in upstream." DEFVAL { -38 } ::= { hwadslLineExtConfProfileCfgEntry 65 } hwadsl2LExtLineProfMaxNomAtpDs OBJECT-TYPE SYNTAX Unsigned32 (0..255) UNITS "0.1 dBm" MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum nominal aggregate transmit power in the downstream direction during initialization and showtime. It ranges from 0 to 255 units of 0.1 dBm (physical values are 0 to 25.5 dBm)." REFERENCE "ITU-T G.997.1, paragraph 7.3.1.2" DEFVAL { 204 } ::= { hwadslLineExtConfProfileCfgEntry 66 } hwadsl2LExtLineProfMaxNomAtpUs OBJECT-TYPE SYNTAX Unsigned32 (0..255) UNITS "0.1 dBm" MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum nominal aggregate transmit power in the upstream direction during initialization and showtime. It ranges from 0 to 255 units of 0.1 dBm (physical values are 0 to 25.5 dBm)." REFERENCE "ITU-T G.997.1, paragraph 7.3.1.2" DEFVAL { 125 } ::= { hwadslLineExtConfProfileCfgEntry 67 } hwadsl2LExtLineProfInmIatoDs OBJECT-TYPE SYNTAX Unsigned32(3..511) MAX-ACCESS read-create STATUS current DESCRIPTION "The parameter of downstream impulse noise monitoring inter arrival time offset. This is the inter arrival time offset that the xTU receiver shall use to determine in which bin of the inter arrival time histogram the IAT is reported. The valid values for INMIATO ranges from 3 to 511 DMT symbols in steps of 1 DMT symbol. " REFERENCE "ITU-T G.997.1, paragraph 7.3.1.9.1" DEFVAL { 3 } ::= { hwadslLineExtConfProfileCfgEntry 68 } hwadsl2LExtLineProfInmIatsDs OBJECT-TYPE SYNTAX Unsigned32(0..7) MAX-ACCESS read-create STATUS current DESCRIPTION "The parameter of downstream impulse noise monitoring inter arrival time step. This is the inter arrival time step that the xTU receiver shall use to determine in which bin of the inter arrival time histogram the IAT is reported. The valid values for INMIATS ranges from 0 to 7 in steps of 1. " REFERENCE "ITU-T G.997.1, paragraph 7.3.1.9.2" DEFVAL { 0 } ::= { hwadslLineExtConfProfileCfgEntry 69 } hwadsl2LExtLineProfInmCcDs OBJECT-TYPE SYNTAX Unsigned32(0..64) MAX-ACCESS read-create STATUS current DESCRIPTION "The parameter of downstream impulse noise monitoring cluster continuation value. This is the cluster continuation value that the xTU receiver shall use in the cluster indication process described in the relevant ITU-T Recommendation. The valid values for INMCC range from 0 to 64 DMT symbols in steps of 1 DMT symbol. " REFERENCE "ITU-T G.997.1, paragraph 7.3.1.9.3" DEFVAL { 0 } ::= { hwadslLineExtConfProfileCfgEntry 70 } hwadsl2LExtLineProfInmInpeqModeDs OBJECT-TYPE SYNTAX Unsigned32(0..4) MAX-ACCESS read-create STATUS current DESCRIPTION "The parameter of downstream impulse noise monitoring equivalent impulse noise protect mode. This is the INM Equivalent INP Mode that the xTU receiver shall use in the computation of the Equivalent INP, as defined in the relevant ITU-T Recommendation. The valid values for INM_INPEQ_MODE are 0, 1, 2, 3, and 4. " REFERENCE "ITU-T G.997.1, paragraph 7.3.1.9.4" DEFVAL { 0 } ::= { hwadslLineExtConfProfileCfgEntry 71 } hwadsl2LExtLineProfForceInpDs OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The parameter indicates that the framer settings of the upstream bearer shall be selected such that the impulse noise protection computed according to the formula specified in the relevant recommendation is greater than or equal to the minimal impulse noise protection requirement. This flag shall have the same value for all the bearers of one line in the same direction. " DEFVAL { false } ::= { hwadslLineExtConfProfileCfgEntry 72 } hwadsl2LExtLineProfForceInpUs OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The parameter indicates that the framer settings of the upstream bearer shall be selected such that the impulse noise protection computed according to the formula specified in the relevant recommendation is greater than or equal to the minimal impulse noise protection requirement. This flag shall have the same value for all the bearers of one line in the same direction. " DEFVAL { false } ::= { hwadslLineExtConfProfileCfgEntry 73 } hwadsl2LExtLineProfInitPolicy OBJECT-TYPE SYNTAX INTEGER { policy0(1), policy1(2), policy2(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "If retransmission is not used in a given transmit direction, this parameter indicates which policy shall be applied to determine the transceiver configuration parameters at initialization. The valid values for CIPOLICY are 0,1 and 2. Those policies are defined in the respective recommendations. Options: 1. policy0 (1) - Policy 0 according to the applicable standard 2. policy1 (2) - Policy 1 according to the applicable standard 3. policy2 (3) - Policy 2 according to the applicable standard " REFERENCE "ITU-T G.997.1 Amendment 1, paragraph #7.3.2.10 (CIPOLICY)" DEFVAL { policy0 } ::= { hwadslLineExtConfProfileCfgEntry 74 } hwadsl2LExtLineProfL3Time OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "This minimum time (in seconds) between an entry into the L3 state and the L0 or L2 state. " DEFVAL { 255 } ::= { hwadslLineExtConfProfileCfgEntry 75 } hwadsl2LExtLineProfL3ModeState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Power management state enabling. The state of L3 power management mode. Options: 1. enabled(1) - The L3 power management mode is enabled 2. disabled(2) - The L3 power management mode is disabled " DEFVAL { disabled } ::= { hwadslLineExtConfProfileCfgEntry 76 } -- hwAdslLineLatestActParaInfoTable hwAdslLineLatestActParaInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF HwAdslLineLatestActParaInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides one row for each ADSL port. Each row contains the latest actived parameters. The index of this table is ifIndex. " ::= { hwAdslMibObjects 14 } hwAdslLineLatestActParaInfoEntry OBJECT-TYPE SYNTAX HwAdslLineLatestActParaInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides one row for each ADSL port. Each row contains the latest actived parameters. The index of this entry is ifIndex. " INDEX { ifIndex } ::= { hwAdslLineLatestActParaInfoTable 1 } HwAdslLineLatestActParaInfoEntry ::= SEQUENCE { hwAdslLineLatestActiveTimeInfo DateAndTime, hwAdslLineLatestDeactiveTimeInfo DateAndTime, hwAdslAtucLatestTxRateInfo Gauge32, hwAdslAturLatestTxRateInfo Gauge32, hwAdslAtucLatestSnrMgnInfo Integer32, hwAdslAturLatestSnrMgnInfo Integer32, hwAdslAtucLatestAtnInfo Gauge32, hwAdslAturLatestAtnInfo Gauge32, hwAdslAtucLatestAttainableRateInfo Gauge32, hwAdslAturLatestAttainableRateInfo Gauge32, hwAdslAtucLatestConfTxRateInfo Gauge32, hwAdslAturLatestConfTxRateInfo Gauge32, hwAdslAtucLatestInterleaveDelayInfo Gauge32, hwAdslAturLatestInterleaveDelayInfo Gauge32, hwAdslAtucLatestTargetSnrMgnInfo Integer32, hwAdslAturLatestTargetSnrMgnInfo Integer32, hwAdslAtucLatestTxRateThresholdInfo Gauge32, hwAdslAturLatestTxRateThresholdInfo Gauge32 } hwAdslLineLatestActiveTimeInfo OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Actual time when latest actived." ::= { hwAdslLineLatestActParaInfoEntry 1 } hwAdslLineLatestDeactiveTimeInfo OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Actual time when latest deactived. If port is actived, the value is invalid." ::= { hwAdslLineLatestActParaInfoEntry 2 } hwAdslAtucLatestTxRateInfo OBJECT-TYPE SYNTAX Gauge32 UNITS "bps" MAX-ACCESS read-only STATUS current DESCRIPTION "Actual transmit rate on this channel when latest actived. Unit: bps " ::= { hwAdslLineLatestActParaInfoEntry 3 } hwAdslAturLatestTxRateInfo OBJECT-TYPE SYNTAX Gauge32 UNITS "bps" MAX-ACCESS read-only STATUS current DESCRIPTION "Actual transmit rate on this channel when latest actived. Unit: bps " ::= { hwAdslLineLatestActParaInfoEntry 4 } hwAdslAtucLatestSnrMgnInfo OBJECT-TYPE SYNTAX Integer32 UNITS "tenth dB" MAX-ACCESS read-only STATUS current DESCRIPTION "Noise Margin as seen by this ATU-C at the time of the last adslAtucRateChangeTrap event. Unit: tenth dB. " ::= { hwAdslLineLatestActParaInfoEntry 5 } hwAdslAturLatestSnrMgnInfo OBJECT-TYPE SYNTAX Integer32 UNITS "tenth dB" MAX-ACCESS read-only STATUS current DESCRIPTION "Noise Margin as seen by this ATU-R at the time of the last adslAtucRateChangeTrap event. Unit: tenth dB. " ::= { hwAdslLineLatestActParaInfoEntry 6 } hwAdslAtucLatestAtnInfo OBJECT-TYPE SYNTAX Gauge32 UNITS "tenth dB" MAX-ACCESS read-only STATUS current DESCRIPTION "Measured difference in the total power transmitted as seen by this ATU-C at the time of the last adslAtucRateChangeTrap event. Unit: tenth dB. " ::= { hwAdslLineLatestActParaInfoEntry 7 } hwAdslAturLatestAtnInfo OBJECT-TYPE SYNTAX Gauge32 UNITS "tenth dB" MAX-ACCESS read-only STATUS current DESCRIPTION "Measured difference in the total power transmitted as seen by this ATU-R at the time of the last adslAtucRateChangeTrap event. Unit: tenth dB. " ::= { hwAdslLineLatestActParaInfoEntry 8 } hwAdslAtucLatestAttainableRateInfo OBJECT-TYPE SYNTAX Gauge32 UNITS "bps" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the maximum attainable data rate by the ATU-C at the time of the last adslAtucRateChangeTrap event. Unit: bps " ::= { hwAdslLineLatestActParaInfoEntry 9 } hwAdslAturLatestAttainableRateInfo OBJECT-TYPE SYNTAX Gauge32 UNITS "bps" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the maximum attainable data rate by the ATU-R at the time of the last adslAtucRateChangeTrap event. Unit: bps " ::= { hwAdslLineLatestActParaInfoEntry 10 } hwAdslAtucLatestConfTxRateInfo OBJECT-TYPE SYNTAX Gauge32 UNITS "bps" MAX-ACCESS read-only STATUS current DESCRIPTION "Configured transmit rate for ADSL port. See adslAtucConfRateChanRatio for information regarding RADSL mode and ATUR transmit rate for ATUC receive rates. Unit: bps. " ::= { hwAdslLineLatestActParaInfoEntry 11 } hwAdslAturLatestConfTxRateInfo OBJECT-TYPE SYNTAX Gauge32 UNITS "bps" MAX-ACCESS read-only STATUS current DESCRIPTION "Configured receive rate for ADSL port. See adslAtucConfRateChanRatio for information regarding RADSL mode and ATUR transmit rate for ATUC receive rates. Unit: bps. " ::= { hwAdslLineLatestActParaInfoEntry 12 } hwAdslAtucLatestInterleaveDelayInfo OBJECT-TYPE SYNTAX Gauge32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Interleave delay for this channel when latest actived. Unit: milliseconds " ::= { hwAdslLineLatestActParaInfoEntry 13 } hwAdslAturLatestInterleaveDelayInfo OBJECT-TYPE SYNTAX Gauge32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Interleave delay for this channel when latest actived. Unit: milliseconds " ::= { hwAdslLineLatestActParaInfoEntry 14 } hwAdslAtucLatestTargetSnrMgnInfo OBJECT-TYPE SYNTAX Integer32 (0..310) UNITS "tenth dB" MAX-ACCESS read-only STATUS current DESCRIPTION "Port Signal/Noise Margin. Range: 0-310 Unit: tenth dB " ::= { hwAdslLineLatestActParaInfoEntry 15 } hwAdslAturLatestTargetSnrMgnInfo OBJECT-TYPE SYNTAX Integer32 (0..310) UNITS "tenth dB" MAX-ACCESS read-only STATUS current DESCRIPTION "Port Signal/Noise Margin. Range: 0-310 Unit: tenth dB " ::= { hwAdslLineLatestActParaInfoEntry 16 } hwAdslAtucLatestTxRateThresholdInfo OBJECT-TYPE SYNTAX Gauge32 UNITS "bps" MAX-ACCESS read-only STATUS current DESCRIPTION "Port down stream threshold. Unit: bps " ::= { hwAdslLineLatestActParaInfoEntry 17 } hwAdslAturLatestTxRateThresholdInfo OBJECT-TYPE SYNTAX Gauge32 UNITS "bps" MAX-ACCESS read-only STATUS current DESCRIPTION "Port up stream threshold. Unit: bps " ::= { hwAdslLineLatestActParaInfoEntry 18 } -- hwXdslPortPerformanceStatInfoTable hwXdslPortPerformanceStatInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF HwXdslPortPerformanceStatInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "XDSL port performance staticstic table. The indexes of this table are ifIndex and hwXdslPort15minutesPerformanceIntervalInfo. " ::= { hwAdslMibObjects 15 } hwXdslPortPerformanceStatInfoEntry OBJECT-TYPE SYNTAX HwXdslPortPerformanceStatInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "XDSL port performance staticstic table. The indexes of this entry are ifIndex and hwXdslPort15minutesPerformanceIntervalInfo. " INDEX {ifIndex, hwXdslPort15minutesPerformanceIntervalInfo } ::= { hwXdslPortPerformanceStatInfoTable 1 } HwXdslPortPerformanceStatInfoEntry ::= SEQUENCE { hwXdslPort15minutesPerformanceIntervalInfo Integer32, hwXdslPort15minutesPerformanceInBytesInfo Counter32, hwXdslPort15minutesPerformanceOutBytesInfo Counter32, hwXdslPortSyncSuccNumberInfo Counter32, hwXdslPortSyncFailNumberInfo Counter32, hwXdslPortAtucCodeViolationInfo Counter32, hwXdslPortAturCodeViolationInfo Counter32, hwXdslPortAtucFecSecondsInfo Counter32, hwXdslPortAturFecSecondsInfo Counter32, hwXdslPortCurrent15minutesStatTimeInfo Counter32 } hwXdslPort15minutesPerformanceIntervalInfo OBJECT-TYPE SYNTAX Integer32(0..96) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of the interval which is queried. Range: 0-96 " ::= { hwXdslPortPerformanceStatInfoEntry 1 } hwXdslPort15minutesPerformanceInBytesInfo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Read the receive bytes of xDSL port during 15 minutes." ::= { hwXdslPortPerformanceStatInfoEntry 2 } hwXdslPort15minutesPerformanceOutBytesInfo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Read the transmit bytes of xDSL port during 15 minutes." ::= { hwXdslPortPerformanceStatInfoEntry 3 } hwXdslPortSyncSuccNumberInfo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of successful activations of the ADSL/G.SHDSL port within 15 minutes" ::= { hwXdslPortPerformanceStatInfoEntry 4 } hwXdslPortSyncFailNumberInfo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of failed activations of the ADSL/G.SHDSL port within 15 minutes" ::= { hwXdslPortPerformanceStatInfoEntry 5 } hwXdslPortAtucCodeViolationInfo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of head errors of the ATUC cell within 15 minutes." ::= { hwXdslPortPerformanceStatInfoEntry 6 } hwXdslPortAturCodeViolationInfo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of head errors of the ATUR cell within 15 minutes." ::= { hwXdslPortPerformanceStatInfoEntry 7 } hwXdslPortAtucFecSecondsInfo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Seconds of the ATUC FEC errors within 15 minutes." ::= { hwXdslPortPerformanceStatInfoEntry 8 } hwXdslPortAturFecSecondsInfo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Seconds of the ATUR FEC errors within 15 minutes." ::= { hwXdslPortPerformanceStatInfoEntry 9 } hwXdslPortCurrent15minutesStatTimeInfo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Read the Stat. time of current 15 minutes." ::= { hwXdslPortPerformanceStatInfoEntry 10 } -- hwadslAtucPhysInfoTable hwadslAtucPhysInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF HwadslAtucPhysInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides the physical layer parameters of each ATUC. The index of this table is ifIndex. " ::= { hwAdslMibObjects 16 } hwadslAtucPhysInfoEntry OBJECT-TYPE SYNTAX HwadslAtucPhysInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides the physical layer parameters of each ATUC. The index of this entry is ifIndex. " INDEX {ifIndex } ::= { hwadslAtucPhysInfoTable 1 } HwadslAtucPhysInfoEntry ::= SEQUENCE { hwAdslAtucCurrTransModeInfo HWADSLTRANSMISSIONMODETYPE, hwAdslAtucCurrSignalAtnInfo Gauge32, hwadslAtucInvG994VendorId OCTET STRING, hwadslAtucLInvSelfTestResult Unsigned32, hwadslAtucTransmissionCapabilitiesInfo Adsl2TransmissionModeType } hwAdslAtucCurrTransModeInfo OBJECT-TYPE SYNTAX HWADSLTRANSMISSIONMODETYPE MAX-ACCESS read-only STATUS current DESCRIPTION "A set of ADSL line transmission modes." ::= { hwadslAtucPhysInfoEntry 1 } hwAdslAtucCurrSignalAtnInfo OBJECT-TYPE SYNTAX Gauge32 (0..630) UNITS "tenth dB" MAX-ACCESS read-only STATUS current DESCRIPTION "Current signal attenuation of the ATU-C, indicating the difference between the transmit signal of the ATU-R and the receive signal of the ATU-C. Range: 0-630 Unit: tenth dB " ::= { hwadslAtucPhysInfoEntry 2 } hwadslAtucInvG994VendorId OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The ATU G.994.1 Vendor ID as inserted in the G.994.1 CL/CLR message. It consists of 8 binary octets, including a country code followed by a (regionally allocated) provider code, as defined in Recommendation T.35." REFERENCE "ITU-T G.997.1, paragraph 7.4" ::= { hwadslAtucPhysInfoEntry 3 } hwadslAtucLInvSelfTestResult OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The ATU self-test result, coded as a 32-bit value. The most significant octet of the result is '0' if the self-test passed, and '1' if the self-test failed. The interpretation of the other octets is vendor discretionary." REFERENCE "ITU-T G.997.1, paragraph 7.4" ::= { hwadslAtucPhysInfoEntry 4 } hwadslAtucTransmissionCapabilitiesInfo OBJECT-TYPE SYNTAX Adsl2TransmissionModeType MAX-ACCESS read-only STATUS current DESCRIPTION "The ATU transmission system capability list of the different coding types. It is coded in a bit-map representation with 1 or more bits set. A bit set to '1' means that the ATU supports the respective coding. The value may be derived from the handshaking procedures defined in G.994.1. " ::= { hwadslAtucPhysInfoEntry 5 } -- hwadslLineExtInfoTable hwadslLineExtInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF HwadslLineExtInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is an extension of RFC 2662. It contains ADSL line configuration and monitoring information. This includes the ADSL line's capabilities and actual ADSL transmission system. An entry extends the adslLineEntry defined in [RFC2662]. Each entry corresponds to an ADSL line. The index of this table is ifIndex. " ::= { hwAdslMibObjects 17 } hwadslLineExtInfoEntry OBJECT-TYPE SYNTAX HwadslLineExtInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is an extension of RFC 2662. It contains ADSL line configuration and monitoring information. This includes the ADSL line's capabilities and actual ADSL transmission system. An entry extends the adslLineEntry defined in [RFC2662]. Each entry corresponds to an ADSL line. The index of this entry is ifIndex. " AUGMENTS { adslLineEntry } ::= { hwadslLineExtInfoTable 1 } HwadslLineExtInfoEntry ::= SEQUENCE { hwadsl2LineTransAtucActualInfo Adsl2TransmissionModeType, hwadslLineStatusRtxUsedDs INTEGER, hwadslLineStatusInitResult INTEGER, hwadslLineStatusSigAttenDs Unsigned32, hwadslLineStatusSigAttenUs Unsigned32, hwadslLineStatusActPsdDs Integer32, hwadslLineStatusActPsdUs Integer32, hwadslLineStatusLastRetrainInfo INTEGER, hwadslLineStatusLineRateDs Unsigned32, hwadslLineStatusLineRateUs Unsigned32 } hwadsl2LineTransAtucActualInfo OBJECT-TYPE SYNTAX Adsl2TransmissionModeType MAX-ACCESS read-only STATUS current DESCRIPTION "The actual transmission mode of the ATU-C. During ADSL line initialization, the ADSL Transceiver Unit - Remote terminal end (ATU-R) will determine the mode used for the link. This value will be limited a single transmission mode that is a subset of those modes enabled by the ATU-C and denoted by adslLineTransAtucConfig. After an initialization has occurred, its mode is saved as the 'Current' mode and is persistence should the link go down. This object returns 0 (i.e. BITS with no mode bit set) if the mode is not known. " REFERENCE "Section 7.3.2 ITU G.997.1 " ::= { hwadslLineExtInfoEntry 1 } hwadslLineStatusRtxUsedDs OBJECT-TYPE SYNTAX INTEGER{ rtxInuse(1), rtxUnusedModeForbidden(2), rtxUnusedNotSupportedXtuc(3), rtxUnusedNotSupportedXtur(4), rtxUnusedNotSupportedXtucAndXtur(5), invalidValue(-1) } MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter specifies whether G.998.4 retransmission is used (i.e., active in Showtime) in a given transmit direction. The parameter in downstream is RTX_USED_ds, and the parameter in upstream is RTX_USED_us. In G.992.3 and G992.5 only the downstream parameter RTX_USED_ds is relevant, the value in the upstream direction shall be ignored. In G.993.2, both parameters are relevant. Options: 1. rtxInuse(1) - RTX in use 2. rtxUnusedModeForbidden(2) - RTX not in use, due to RTX_MODE = FORBIDDEN 3. rtxUnusedNotSupportedXtuc(3) - RTX not in use, due to not supported by the XTU-C 4. rtxUnusedNotSupportedXtur(4) - RTX not in use, due to not supported by the XTU-R 5. rtxUnusedNotSupportedXtucAndXtur(5) - RTX not in use, due to not supported by the XTU-C and XTU-R 6. invalidValue(-1) - Invalid value This parameter shall also be reported in the case of RTX_MODE=RTX_FORCED with INIT FAILURE or with RTX_MODE=RTX_TESTMODE with INIT FAILURE. " REFERENCE "ITU-T G.997.1, paragraph 7.5.1.38" ::= { hwadslLineExtInfoEntry 2 } hwadslLineStatusInitResult OBJECT-TYPE SYNTAX INTEGER { noFail(0), configError(1), configNotFeasible(2), commFail(3), noPeerXtu(4), otherCause(5), ginpNotSelected(6), invalidValue(-1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the result of the last full initialization performed on the line. Options: 1. noFail(0) - Successful initialization 2. configError(1) - Configuration failure 3. configNotFeasible(2) - Configuration details not supported 4. commFail(3) - Communication failure 5. noPeerXtu(4) - Peer xTU not detected 6. otherCause(5) - Other initialization failure reason 7. ginpNotSelected(6) - G.998.4 Retransmission mode was not selected while RTX_MODE = FORCED or with RTX_MODE = RTX_TESTMODE 8. invalidValue(-1) - Invalid value" REFERENCE "ITU-T G.997.1, paragraph 7.5.1.3" ::= { hwadslLineExtInfoEntry 3 } hwadslLineStatusSigAttenDs OBJECT-TYPE SYNTAX Unsigned32 (0..1270 | 2147483646 | 2147483647) UNITS "0.1 dB" MAX-ACCESS read-only STATUS current DESCRIPTION "The measured difference in the total power transmitted by the ATU-C and the total power received by the ATU-R over all sub- carriers during Showtime. It ranges from 0 to 1270 units of 0.1 dB (physical values are 0 to 127 dB). A special value of 0x7FFFFFFF (2147483647) indicates the signal attenuation is out of range to be represented. A special value of 0x7FFFFFFE (2147483646) indicates the signal attenuation measurement is currently unavailable." REFERENCE "ITU-T G.997.1, paragraph 7.5.1.8" ::= { hwadslLineExtInfoEntry 4 } hwadslLineStatusSigAttenUs OBJECT-TYPE SYNTAX Unsigned32 (0..1270 | 2147483646 | 2147483647) UNITS "0.1 dB" MAX-ACCESS read-only STATUS current DESCRIPTION "The measured difference in the total power transmitted by the ATU-R and the total power received by the ATU-C over all sub- carriers during Showtime. It ranges from 0 to 1270 units of 0.1 dB (physical values are 0 to 127 dB). A special value of 0x7FFFFFFF (2147483647) indicates the signal attenuation is out of range to be represented. A special value of 0x7FFFFFFE (2147483646) indicates the signal attenuation measurement is currently unavailable." REFERENCE "ITU-T G.997.1, paragraph 7.5.1.9" ::= { hwadslLineExtInfoEntry 5 } hwadslLineStatusActPsdDs OBJECT-TYPE SYNTAX Integer32 (-900..0 | 2147483647) UNITS "0.1 dB" MAX-ACCESS read-only STATUS current DESCRIPTION "Actual Power Spectrum Density (PSD) Downstream. The average downstream transmit PSD over the sub-carriers used for downstream. It ranges from -900 to 0 units of 0.1 dB (physical values are -90 to 0 dBm/Hz). A value of 0x7FFFFFFF (2147483647) indicates the measurement is out of range to be represented." REFERENCE "ITU-T G.997.1, paragraph 7.5.1.14" ::= { hwadslLineExtInfoEntry 6 } hwadslLineStatusActPsdUs OBJECT-TYPE SYNTAX Integer32 (-900..0 | 2147483647) UNITS "0.1 dB" MAX-ACCESS read-only STATUS current DESCRIPTION "Actual Power Spectrum Density (PSD) Upstream. The average upstream transmit PSD over the sub-carriers used for upstream. It ranges from -900 to 0 units of 0.1 dB (physical values are -90 to 0 dBm/Hz). A value of 0x7FFFFFFF (2147483647) indicates the measurement is out of range to be represented." REFERENCE "ITU-T G.997.1, paragraph 7.5.1.15" ::= { hwadslLineExtInfoEntry 7 } hwadslLineStatusLastRetrainInfo OBJECT-TYPE SYNTAX INTEGER { none(1), cpe-l3-trigger(2), lom-us-trigger-dra(3), lom-ds-trigger-dra(4), cpe-never-answer-oam(5), cpe-no-more-answer-oam(6), persistent-ncd-us(7), persistent-ncd-ds(8), persistent-lcd-us(9), persistent-lcd-ds(10), l2-problem-co-drop(11), l2-problem-cpe-drop(12), bitswap-refused-us-co-drop(13), bitswap-refused-us-cpe-drop(14), channel-change-us-co-drop(15), channel-change-us-cpe-drop(16), noise-increase-us-co-drop(17), noise-increase-us-cpe-drop(18), bitswap-refused-ds-co-drop(19), bitswap-refused-ds-cpe-drop(20), channel-change-ds-co-drop(21), channel-change-ds-cpe-drop(22), noise-increase-ds-co-drop(23), noise-increase-ds-cpe-drop(24), lom-us-co-drop(25), lom-us-cpe-drop(26), lom-ds-co-drop(27), lom-ds-cpe-drop(28), sra-problem-us-co-drop(29), sra-problem-us-cpe-drop(30), sra-failed-us-co-drop(31), sra-failed-us-cpe-drop(32), sra-problem-ds-co-drop(33), sra-problem-ds-cpe-drop(34), sra-rejected-ds-co-drop(35), sra-rejected-ds-cpe-drop(36), bitswap-problem-us-co-drop(37), bitswap-problem-us-cpe-drop(38), bitswap-failed-us-co-drop(39), bitswap-failed-us-cpe-drop(40), bitswap-problem-ds-co-drop(41), bitswap-problem-ds-cpe-drop(42), bitswap-rejected-ds-co-drop(43), bitswap-rejected-ds-cpe-drop(44), cpe-switched-off(45), cpe-lost(46), co-reset(47), co-stop(48), unknown(49) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the last retrained information performed on the line. Options: 1. none(1) - No record is available 2. cpe-l3-trigger(2) - The terminal initiates a low power consumption L3 request 3. lom-us-trigger-dra(3) - The upstream noise margin is smaller than the minimum noise margin in rate dynamic adjustment 4. lom-ds-trigger-dra(4) - The downstream noise margin is smaller than the minimum noise margin in rate dynamic adjustment 5. cpe-never-answer-oam(5) - No OAM response is received from the CPE all the time 6. cpe-no-more-answer-oam(6) - No OAM response is received from the CPE 7. persistent-ncd-us(7) - Upstream continuous no cell delineation 8. persistent-ncd-ds(8) - Downstream continuous no cell delineation 9. persistent-lcd-us(9) - Upstream continuous loss of cell delineation 10.persistent-lcd-ds(10) - Downstream continuous loss of cell delineation 11.l2-problem-co-drop(11) - The CO is faulty during the switching from L0 to L2 12.l2-problem-cpe-drop(12) - The CPE is faulty during the switching from L0 to L2 13.bitswap-refused-us-co-drop(13) - The CO goes offline when the upstream bit swap fault occurs 10 times consecutively 14.bitswap-refused-us-cpe-drop(14) - The CPE goes offline when the downstream bit swap fault occurs 10 times consecutively 15.channel-change-us-co-drop(15) - The CO goes offline when the upstream net rate changes 16.channel-change-us-cpe-drop(16) - The CPE goes offline when the upstream net rate changes 17.noise-increase-us-co-drop(17) - The CO goes offline when the upstream noise increases 18.noise-increase-us-cpe-drop(18) - The CPE goes offline when the upstream noise increases 19.bitswap-refused-ds-co-drop(19) - The CO goes offline when the downstream bit swap fault occurs 10 times consecutively 20.bitswap-refused-ds-cpe-drop(20) - The CPE goes offline when the downstream bit swap fault occurs 10 times consecutively 21.channel-change-ds-co-drop(21) - The CO goes offline when the downstream net rate changes 22.channel-change-ds-cpe-drop(22) - The CPE goes offline when the downstream net rate changes 23.noise-increase-ds-co-drop(23) - The CO goes offline when the downstream noise increases 24.noise-increase-ds-cpe-drop(24) - The CPE goes offline when the downstream noise increases 25.lom-us-co-drop(25) - The CO goes offline when the upstream noise margin is smaller than the minimum noise margin 26.lom-us-cpe-drop(26) - The CPE goes offline when the upstream noise margin is smaller than the minimum noise margin 27.lom-ds-co-drop(27) - The CO goes offline when the downstream noise margin is smaller than the minimum noise margin 28.lom-ds-cpe-drop(28) - The CPE goes offline when the downstream noise margin is smaller than the minimum noise margin 29.sra-problem-us-co-drop(29) - The CO goes offline when the upstream SRA is faulty 30.sra-problem-us-cpe-drop(30) - The CPE goes offline when the upstream SRA is faulty 31.sra-failed-us-co-drop(31) - The CO goes offline when the upstream SRA fails 32.sra-failed-us-cpe-drop(32) - The CPE goes offline when the upstream SRA fails 33.sra-problem-ds-co-drop(33) - The CO goes offline when the downstream SRA is fault 34.sra-problem-ds-cpe-drop(34) - The CPE goes offline when the downstream SRA is faulty 35.sra-rejected-ds-co-drop(35) - The CO goes offline when the downstream SRA is rejected 36.sra-rejected-ds-cpe-drop(36) - The CPE goes offline when the downstream SRA is rejected 37.bitswap-problem-us-co-drop(37) - The CO goes offline when the upstream bit swap is faulty 38.bitswap-problem-us-cpe-drop(38) - The CPE goes offline when the upstream bit swap is faulty 39.bitswap-failed-us-co-drop(39) - The CO goes offline when the upstream bit swap fails 40.bitswap-failed-us-cpe-drop(40) - The CPE goes offline when the upstream bit swap fails 41.bitswap-problem-ds-co-drop(41) - The CO goes offline when the downstream bit swap is faulty 42.bitswap-problem-ds-cpe-drop(42) - The CPE goes offline when the downstream bit swap is faulty 43.bitswap-rejected-ds-co-drop(43) - The CO goes offline when the downstream bit swap is rejected 44.bitswap-rejected-ds-cpe-drop(44) - The CPE goes offline when the downstream bit swap is rejected 45.cpe-switched-off(45) - The CPE power supply is shut down 46.cpe-lost(46) - The CPE is disconnected 47.co-reset(47) - The CO resets the chipset or line 48.co-stop(48) - The CO actively deactivate the port 49.unknown(49) - Unknown reason " ::= { hwadslLineExtInfoEntry 8 } hwadslLineStatusLineRateDs OBJECT-TYPE SYNTAX Unsigned32 UNITS "bits/second" MAX-ACCESS read-only STATUS current DESCRIPTION "The actual line rate downstream. Unit: bits/second " ::= { hwadslLineExtInfoEntry 9 } hwadslLineStatusLineRateUs OBJECT-TYPE SYNTAX Unsigned32 UNITS "bits/second" MAX-ACCESS read-only STATUS current DESCRIPTION "The actual line rate upstream. Unit: bits/second " ::= { hwadslLineExtInfoEntry 10 } -- hwadslAtucChanPerfDataInfoTable hwadslAtucChanPerfDataInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF HwadslAtucChanPerfDataInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Parameter table of the ATUC channel performance: This table is used to query the performance statistics of the ATUC channel. The index of this table is ifIndex. " ::= { hwAdslMibObjects 18 } hwadslAtucChanPerfDataInfoEntry OBJECT-TYPE SYNTAX HwadslAtucChanPerfDataInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Parameter table of the ATUC channel performance: This table is used to query the performance statistics of the ATUC channel. The index of this entry is ifIndex. " INDEX {ifIndex } ::= { hwadslAtucChanPerfDataInfoTable 1 } HwadslAtucChanPerfDataInfoEntry ::= SEQUENCE { hwadslAtucChanFecBlksInfo Counter32, hwadslAtucChanHecBlksInfo Counter32, hwadslAtucChanCrcBlksInfo Counter32, hwadslAtucChanPerfCurr15MinFecBlksInfo Counter32, hwadslAtucChanPerfCurr15MinHecBlksInfo Counter32, hwadslAtucChanPerfCurr15MinCrcBlksInfo Counter32, hwadslAtucChanPerfCurr1DayFecBlksInfo Counter32, hwadslAtucChanPerfCurr1DayHecBlksInfo Counter32, hwadslAtucChanPerfCurr1DayCrcBlksInfo Counter32, hwadslAtucChanPerfPrev1DayFecBlksInfo Counter32, hwadslAtucChanPerfPrev1DayHecBlksInfo Counter32, hwadslAtucChanPerfPrev1DayCrcBlksInfo Counter32, hwadslAtucChanRtxCWInfo Gauge32, hwadslAtucChanRtxCorrectedCWInfo Gauge32, hwadslAtucChanRtxUncorrectedCWInfo Gauge32, hwadslAtucChanPerfCurr15MinRtxCWInfo Gauge32, hwadslAtucChanPerfCurr15MinRtxCorrectedCWInfo Gauge32, hwadslAtucChanPerfCurr15MinRtxUncorrectedCWInfo Gauge32, hwadslAtucChanPerfCurr1DayRtxCWInfo Gauge32, hwadslAtucChanPerfCurr1DayRtxCorrectedCWInfo Gauge32, hwadslAtucChanPerfCurr1DayRtxUncorrectedCWInfo Gauge32, hwadslAtucChanPerfPrev1DayRtxCWInfo Gauge32, hwadslAtucChanPerfPrev1DayRtxCorrectedCWInfo Gauge32, hwadslAtucChanPerfPrev1DayRtxUncorrectedCWInfo Gauge32, hwadslAtucChanCurr15MStartTime DateAndTime, hwadslAtucChanCurr1DayStartTime DateAndTime } hwadslAtucChanFecBlksInfo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of all blocks received with FEC anomalies since agent reset. " ::= { hwadslAtucChanPerfDataInfoEntry 1 } hwadslAtucChanHecBlksInfo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of all blocks received with HEC anomalies since agent reset. " ::= { hwadslAtucChanPerfDataInfoEntry 2 } hwadslAtucChanCrcBlksInfo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of all blocks received with CRC anomalies since agent reset. " ::= { hwadslAtucChanPerfDataInfoEntry 3 } hwadslAtucChanPerfCurr15MinFecBlksInfo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of all blocks received with FEC anomalies on this channel within the current 15 minutes interval. " ::= { hwadslAtucChanPerfDataInfoEntry 4 } hwadslAtucChanPerfCurr15MinHecBlksInfo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of all blocks received with HEC anomalies on this channel within the current 15 minutes interval. " ::= { hwadslAtucChanPerfDataInfoEntry 5 } hwadslAtucChanPerfCurr15MinCrcBlksInfo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of all blocks received with CRC anomalies on this channel within the current 15 minutes interval. " ::= { hwadslAtucChanPerfDataInfoEntry 6 } hwadslAtucChanPerfCurr1DayFecBlksInfo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of all blocks received with FEC anomalies on this channel during the current day as measured by adslAtucChanPerfCurr1DayTimeElapsed. " ::= { hwadslAtucChanPerfDataInfoEntry 7 } hwadslAtucChanPerfCurr1DayHecBlksInfo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of all blocks received with HEC anomalies on this channel during the current day as measured by adslAtucChanPerfCurr1DayTimeElapsed. " ::= { hwadslAtucChanPerfDataInfoEntry 8 } hwadslAtucChanPerfCurr1DayCrcBlksInfo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of all blocks received with CRC anomalies on this channel during the current day as measured by adslAtucChanPerfCurr1DayTimeElapsed. " ::= { hwadslAtucChanPerfDataInfoEntry 9 } hwadslAtucChanPerfPrev1DayFecBlksInfo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of all blocks received with FEC anomalies on this channel within the most recent previous 1-day period. " ::= { hwadslAtucChanPerfDataInfoEntry 10 } hwadslAtucChanPerfPrev1DayHecBlksInfo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of all blocks received with HEC anomalies on this channel within the most recent previous 1-day period. " ::= { hwadslAtucChanPerfDataInfoEntry 11 } hwadslAtucChanPerfPrev1DayCrcBlksInfo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of all blocks received with CRC anomalies on this channel within the most recent previous 1-day period. " ::= { hwadslAtucChanPerfDataInfoEntry 12 } hwadslAtucChanRtxCWInfo OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of units request retransmission since agent reset." ::= { hwadslAtucChanPerfDataInfoEntry 13 } hwadslAtucChanRtxCorrectedCWInfo OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of units corrected by retransmission since agent reset." ::= { hwadslAtucChanPerfDataInfoEntry 14 } hwadslAtucChanRtxUncorrectedCWInfo OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of units uncorrected by retransmission since agent reset." ::= { hwadslAtucChanPerfDataInfoEntry 15 } hwadslAtucChanPerfCurr15MinRtxCWInfo OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of units request retransmission on this channel within the current 15 minutes interval. " ::= { hwadslAtucChanPerfDataInfoEntry 16 } hwadslAtucChanPerfCurr15MinRtxCorrectedCWInfo OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of units corrected by retransmission on this channel within the current 15 minutes interval. " ::= { hwadslAtucChanPerfDataInfoEntry 17 } hwadslAtucChanPerfCurr15MinRtxUncorrectedCWInfo OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of units uncorrected by retransmission on this channel within the current 15 minutes interval. " ::= { hwadslAtucChanPerfDataInfoEntry 18 } hwadslAtucChanPerfCurr1DayRtxCWInfo OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of units request retransmission on this channel during the current day. " ::= { hwadslAtucChanPerfDataInfoEntry 19 } hwadslAtucChanPerfCurr1DayRtxCorrectedCWInfo OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of units corrected by retransmission on this channel during the current day. " ::= { hwadslAtucChanPerfDataInfoEntry 20 } hwadslAtucChanPerfCurr1DayRtxUncorrectedCWInfo OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of units uncorrected by retransmission on this channel during the current day. " ::= { hwadslAtucChanPerfDataInfoEntry 21 } hwadslAtucChanPerfPrev1DayRtxCWInfo OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of units request retransmission on this channel within the most recent previous 1-day period. " ::= { hwadslAtucChanPerfDataInfoEntry 22 } hwadslAtucChanPerfPrev1DayRtxCorrectedCWInfo OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of units corrected by retransmission on this channel within the most recent previous 1-day period. " ::= { hwadslAtucChanPerfDataInfoEntry 23 } hwadslAtucChanPerfPrev1DayRtxUncorrectedCWInfo OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of units uncorrected by retransmission on this channel within the most recent previous 1-day period. " ::= { hwadslAtucChanPerfDataInfoEntry 24 } hwadslAtucChanCurr15MStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Start time of the current 15-minute performance statistics." ::= { hwadslAtucChanPerfDataInfoEntry 25 } hwadslAtucChanCurr1DayStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Start time of the current 1-day performance statistics." ::= { hwadslAtucChanPerfDataInfoEntry 26 } -- hwadslAturChanPerfDataInfoTable hwadslAturChanPerfDataInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF HwadslAturChanPerfDataInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Parameter table of the ATUR channel performance: This table is used to query the performance statistics of the ATUR channel. The index of this table is ifIndex. " ::= { hwAdslMibObjects 19 } hwadslAturChanPerfDataInfoEntry OBJECT-TYPE SYNTAX HwadslAturChanPerfDataInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Parameter table of the ATUR channel performance: This table is used to query the performance statistics of the ATUR channel. The index of this entry is ifIndex. " INDEX { ifIndex } ::= { hwadslAturChanPerfDataInfoTable 1 } HwadslAturChanPerfDataInfoEntry ::= SEQUENCE { hwadslAturChanFecBlksInfo Counter32, hwadslAturChanHecBlksInfo Counter32, hwadslAturChanCrcBlksInfo Counter32, hwadslAturChanPerfCurr15MinFecBlksInfo Counter32, hwadslAturChanPerfCurr15MinHecBlksInfo Counter32, hwadslAturChanPerfCurr15MinCrcBlksInfo Counter32, hwadslAturChanPerfCurr1DayFecBlksInfo Counter32, hwadslAturChanPerfCurr1DayHecBlksInfo Counter32, hwadslAturChanPerfCurr1DayCrcBlksInfo Counter32, hwadslAturChanPerfPrev1DayFecBlksInfo Counter32, hwadslAturChanPerfPrev1DayHecBlksInfo Counter32, hwadslAturChanPerfPrev1DayCrcBlksInfo Counter32, hwadslAturChanRtxCWInfo Gauge32, hwadslAturChanRtxCorrectedCWInfo Gauge32, hwadslAturChanRtxUncorrectedCWInfo Gauge32, hwadslAturChanPerfCurr15MinRtxCWInfo Gauge32, hwadslAturChanPerfCurr15MinRtxCorrectedCWInfo Gauge32, hwadslAturChanPerfCurr15MinRtxUncorrectedCWInfo Gauge32, hwadslAturChanPerfCurr1DayRtxCWInfo Gauge32, hwadslAturChanPerfCurr1DayRtxCorrectedCWInfo Gauge32, hwadslAturChanPerfCurr1DayRtxUncorrectedCWInfo Gauge32, hwadslAturChanPerfPrev1DayRtxCWInfo Gauge32, hwadslAturChanPerfPrev1DayRtxCorrectedCWInfo Gauge32, hwadslAturChanPerfPrev1DayRtxUncorrectedCWInfo Gauge32, hwadslAturChanCurr15MStartTime DateAndTime, hwadslAturChanCurr1DayStartTime DateAndTime } hwadslAturChanFecBlksInfo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of all blocks received with FEC anomalies since agent reset. " ::= { hwadslAturChanPerfDataInfoEntry 1 } hwadslAturChanHecBlksInfo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of all blocks received with HEC anomalies since agent reset. " ::= { hwadslAturChanPerfDataInfoEntry 2 } hwadslAturChanCrcBlksInfo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of all blocks received with CRC anomalies since agent reset. " ::= { hwadslAturChanPerfDataInfoEntry 3 } hwadslAturChanPerfCurr15MinFecBlksInfo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of all blocks received with FEC anomalies on this channel within the current 15 minutes interval. " ::= { hwadslAturChanPerfDataInfoEntry 4 } hwadslAturChanPerfCurr15MinHecBlksInfo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of all blocks received with HEC anomalies on this channel within the current 15 minutes interval. " ::= { hwadslAturChanPerfDataInfoEntry 5 } hwadslAturChanPerfCurr15MinCrcBlksInfo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of all blocks received with CRC anomalies on this channel within the current 15 minutes interval. " ::= { hwadslAturChanPerfDataInfoEntry 6 } hwadslAturChanPerfCurr1DayFecBlksInfo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of all blocks received with FEC anomalies on this channel during the current day as measured by adslAturChanPerfCurr1DayTimeElapsed. " ::= { hwadslAturChanPerfDataInfoEntry 7 } hwadslAturChanPerfCurr1DayHecBlksInfo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of all blocks received with HEC anomalies on this channel during the current day as measured by adslAturChanPerfCurr1DayTimeElapsed. " ::= { hwadslAturChanPerfDataInfoEntry 8 } hwadslAturChanPerfCurr1DayCrcBlksInfo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of all blocks received with CRC anomalies on this channel during the current day as measured by adslAturChanPerfCurr1DayTimeElapsed. " ::= { hwadslAturChanPerfDataInfoEntry 9 } hwadslAturChanPerfPrev1DayFecBlksInfo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of all blocks received with FEC anomalies on this channel within the most recent previous 1-day period. " ::= { hwadslAturChanPerfDataInfoEntry 10 } hwadslAturChanPerfPrev1DayHecBlksInfo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of all blocks received with HEC anomalies on this channel within the most recent previous 1-day period. " ::= { hwadslAturChanPerfDataInfoEntry 11 } hwadslAturChanPerfPrev1DayCrcBlksInfo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of all blocks received with HEC anomalies on this channel within the most recent previous 1-day period. " ::= { hwadslAturChanPerfDataInfoEntry 12 } hwadslAturChanRtxCWInfo OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of units request retransmission since agent reset." ::= { hwadslAturChanPerfDataInfoEntry 13 } hwadslAturChanRtxCorrectedCWInfo OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of units corrected by retransmission since agent reset." ::= { hwadslAturChanPerfDataInfoEntry 14 } hwadslAturChanRtxUncorrectedCWInfo OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of units uncorrected by retransmission since agent reset." ::= { hwadslAturChanPerfDataInfoEntry 15 } hwadslAturChanPerfCurr15MinRtxCWInfo OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of units request retransmission on this channel within the current 15 minutes interval. " ::= { hwadslAturChanPerfDataInfoEntry 16 } hwadslAturChanPerfCurr15MinRtxCorrectedCWInfo OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of units corrected by retransmission on this channel within the current 15 minutes interval. " ::= { hwadslAturChanPerfDataInfoEntry 17 } hwadslAturChanPerfCurr15MinRtxUncorrectedCWInfo OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of units uncorrected by retransmission on this channel within the current 15 minutes interval. " ::= { hwadslAturChanPerfDataInfoEntry 18 } hwadslAturChanPerfCurr1DayRtxCWInfo OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of units request retransmission on this channel during the current day. " ::= { hwadslAturChanPerfDataInfoEntry 19 } hwadslAturChanPerfCurr1DayRtxCorrectedCWInfo OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of units corrected by retransmission on this channel during the current day. " ::= { hwadslAturChanPerfDataInfoEntry 20 } hwadslAturChanPerfCurr1DayRtxUncorrectedCWInfo OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of units uncorrected by retransmission on this channel during the current day. " ::= { hwadslAturChanPerfDataInfoEntry 21 } hwadslAturChanPerfPrev1DayRtxCWInfo OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of units request retransmission on this channel within the most recent previous 1-day period. " ::= { hwadslAturChanPerfDataInfoEntry 22 } hwadslAturChanPerfPrev1DayRtxCorrectedCWInfo OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of units corrected by retransmission on this channel within the most recent previous 1-day period. " ::= { hwadslAturChanPerfDataInfoEntry 23 } hwadslAturChanPerfPrev1DayRtxUncorrectedCWInfo OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of units uncorrected by retransmission on this channel within the most recent previous 1-day period. " ::= { hwadslAturChanPerfDataInfoEntry 24 } hwadslAturChanCurr15MStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Start time of the current 15-minute performance statistics." ::= { hwadslAturChanPerfDataInfoEntry 25 } hwadslAturChanCurr1DayStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Start time of the current 1-day performance statistics." ::= { hwadslAturChanPerfDataInfoEntry 26 } -- hwadslAturChanPerfPrev1DayCrcBlks OBJECT-TYPE -- SYNTAX Counter32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "Count of all blocks received with CRC anomalies -- on this channel within the most recent previous -- 1-day period." -- ::= { adslAturChanPerfDataEntry 65547 } -- hwadslAturChanIntervalInfoTable hwadslAturChanIntervalInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF HwadslAturChanIntervalInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Period table of collecting the ATUR channel performance data. This table is used to query the ATUR channel performance data collected in each period (a day is divided into 96 15-minute periods). The indexes of this table are ifIndex and adslAturChanIntervalNumber. " ::= { hwAdslMibObjects 20 } hwadslAturChanIntervalInfoEntry OBJECT-TYPE SYNTAX HwadslAturChanIntervalInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Period table of collecting the ATUR channel performance data. This table is used to query the ATUR channel performance data collected in each period (a day is divided into 96 15-minute periods). The indexes of this entry are ifIndex and adslAturChanIntervalNumber. " INDEX { ifIndex, adslAturChanIntervalNumber } ::= { hwadslAturChanIntervalInfoTable 1 } HwadslAturChanIntervalInfoEntry ::= SEQUENCE { hwadslAturChanIntervalFecBlksInfo PerfIntervalCount, hwadslAturChanIntervalHecBlksInfo PerfIntervalCount, hwadslAturChanIntervalCrcBlksInfo PerfIntervalCount, hwadslAturChanIntervalRtxCWInfo Gauge32, hwadslAturChanIntervalRtxCorrectedCWInfo Gauge32, hwadslAturChanIntervalRtxUncorrectedCWInfo Gauge32, hwAdslAturChanIntervalStartTime DateAndTime } hwadslAturChanIntervalFecBlksInfo OBJECT-TYPE SYNTAX PerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "The count of all blocks received with FRC anomalies on this channel during this interval. " ::= { hwadslAturChanIntervalInfoEntry 1 } hwadslAturChanIntervalHecBlksInfo OBJECT-TYPE SYNTAX PerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "The count of all blocks received with HRC anomalies on this channel during this interval. " ::= { hwadslAturChanIntervalInfoEntry 2 } hwadslAturChanIntervalCrcBlksInfo OBJECT-TYPE SYNTAX PerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "The count of all blocks received with CRC anomalies on this channel during this interval. " ::= { hwadslAturChanIntervalInfoEntry 3 } hwadslAturChanIntervalRtxCWInfo OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of units request retransmission on this channel during this interval." ::= { hwadslAturChanIntervalInfoEntry 4 } hwadslAturChanIntervalRtxCorrectedCWInfo OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of units corrected by retransmission on this channel during this interval." ::= { hwadslAturChanIntervalInfoEntry 5 } hwadslAturChanIntervalRtxUncorrectedCWInfo OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of units uncorrected by retransmission on this channel during this interval." ::= { hwadslAturChanIntervalInfoEntry 6 } hwAdslAturChanIntervalStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Start time of the historical 15-minute performance statistics." ::= { hwadslAturChanIntervalInfoEntry 7 } -- hwadslLineAlarmConfProfileCfgTable hwadslLineAlarmConfProfileCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF HwadslLineAlarmConfProfileCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains information on the ADSL line configuration. One entry in this table reflects a profile defined by a manager which can be used to configure the modem for a physical line. The entry contains information on the ADSL line configuration. Each entry consists of a list of parameters that represents the configuration of an ADSL modem. When 'dynamic' profiles are implemented, a default profile will always exist. This profile's name will be set to 'DEFVAL' and its parameters will be set to vendor specific values, unless otherwise specified in this document. When 'static' profiles are implemented, profiles are automatically created or destroyed as ADSL physical lines are discovered and removed by the system. The name of the profile will be equivalent to the decimal value of the line's interface index. The index of this table is adslLineAlarmConfProfileName. " ::= { hwAdslMibObjects 21 } hwadslLineAlarmConfProfileCfgEntry OBJECT-TYPE SYNTAX HwadslLineAlarmConfProfileCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains information on the ADSL line configuration. One entry in this table reflects a profile defined by a manager which can be used to configure the modem for a physical line. The entry contains information on the ADSL line configuration. Each entry consists of a list of parameters that represents the configuration of an ADSL modem. When 'dynamic' profiles are implemented, a default profile will always exist. This profile's name will be set to 'DEFVAL' and its parameters will be set to vendor specific values, unless otherwise specified in this document. When 'static' profiles are implemented, profiles are automatically created or destroyed as ADSL physical lines are discovered and removed by the system. The name of the profile will be equivalent to the decimal value of the line's interface index. The index of this entry is adslLineAlarmConfProfileName. " INDEX { IMPLIED adslLineAlarmConfProfileName } ::= { hwadslLineAlarmConfProfileCfgTable 1} HwadslLineAlarmConfProfileCfgEntry ::= SEQUENCE { hwadslLineAlarmConfProfileDyingGaspCfg INTEGER, hwadslLineAlarmConfProfXturThresh15MinLeftrs HCPerfIntervalThreshold, hwAdslLineAlarmConfProfileActiveFailAlarmSwitch INTEGER } hwadslLineAlarmConfProfileDyingGaspCfg OBJECT-TYPE SYNTAX INTEGER { enable (1), disable (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object enables/disables the report of LOSS-OF-POWER alarm in an ADSL line. This object is defaulted enable(1). Options: 1. enable(1) - The report of LOSS-OF-POWER alarm in an ADSL line is enabled 2. disable(2) - The report of LOSS-OF-POWER alarm in an ADSL line is disabled Default: enable(1) " ::= { hwadslLineAlarmConfProfileCfgEntry 1 } hwadslLineAlarmConfProfXturThresh15MinLeftrs OBJECT-TYPE SYNTAX HCPerfIntervalThreshold UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "A threshold for the hwAdslAturPerfCurr15MLeftrs counter, The value 0 means that no threshold is specified for the associated counter. Unit: seconds " REFERENCE "ITU-T G.997.1, paragraph 7.3.1" DEFVAL { 0 } ::= { hwadslLineAlarmConfProfileCfgEntry 2 } hwAdslLineAlarmConfProfileActiveFailAlarmSwitch OBJECT-TYPE SYNTAX INTEGER { enable (1), disable (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object enable/disable the active fail alarm switch. Options: 1. enable(1) - The active fail alarm switch is enabled 2. disable(2) - The active fail alarm switch is disabled " DEFVAL { enable } ::= { hwadslLineAlarmConfProfileCfgEntry 3 } -- hwAdslPortPerformanceStatTable hwAdslPortPerformanceStatInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF HwAdslPortPerformanceStatInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to describe the performance statistics of the ADSL port within 15 minutes. The indexes of this table are ifIndex and hwAdslPort15minutesPerformanceIntervalIndex. " ::= { hwAdslMibObjects 22 } hwAdslPortPerformanceStatInfoEntry OBJECT-TYPE SYNTAX HwAdslPortPerformanceStatInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to describe the performance statistics of the ADSL port within 15 minutes. The indexes of this entry are ifIndex and hwAdslPort15minutesPerformanceIntervalIndex. " INDEX { ifIndex, hwAdslPort15minutesPerformanceIntervalIndex } ::= { hwAdslPortPerformanceStatInfoTable 1 } HwAdslPortPerformanceStatInfoEntry ::= SEQUENCE{ hwAdslPort15minutesPerformanceIntervalIndex Integer32, hwAdslPort15minutesPerformanceInBytesInfo Counter32, hwAdslPort15minutesPerformanceOutBytesInfo Counter32, hwAdslPortSyncSuccNumberInfo Counter32, hwAdslPortSyncFailNumberInfo Counter32, hwAdslPortAtucCodeViolationInfo Counter32, hwAdslPortAturCodeViolationInfo Counter32, hwAdslPortAtucFecSecondsInfo Counter32, hwAdslPortAturFecSecondsInfo Counter32, hwAdslPortCurrent15minutesTimeElapseInfo Counter32, hwAdslPortAtucHecDropCellsCntInfo Counter32, hwAdslPortAturHecDropCellsCntInfo Counter32, hwAdslLineConfProfileInfo OCTET STRING, hwAdslPort15minUpTimeInfo Counter32, hwAdslAtucCurrAtnInfo Gauge32, hwAdslAtucCurrSnrMgnInfo Integer32, hwAdslAtucCurrAttainableRateInfo Gauge32, hwAdslAtucChanCurrTxRateInfo Gauge32, hwAdslAturCurrAtnInfo Gauge32, hwAdslAturCurrSnrMgnInfo Integer32, hwAdslAturCurrAttainableRateInfo Gauge32, hwAdslAturChanCurrTxRateInfo Gauge32, hwAdslAtucIntervalESsInfo PerfIntervalCount, hwAdslAtucIntervalLofsInfo PerfIntervalCount, hwAdslAtucIntervalLolsInfo PerfIntervalCount, hwAdslAtucIntervalLossInfo PerfIntervalCount, hwAdslAtucIntervalLprsInfo PerfIntervalCount, hwAdslAturIntervalESsInfo PerfIntervalCount, hwAdslAturIntervalLofsInfo PerfIntervalCount, hwAdslAturIntervalLossInfo PerfIntervalCount, hwAdslAturIntervalLprsInfo PerfIntervalCount, hwAdslAtucChanIntervalReceivedBlksInfo PerfIntervalCount, hwAdslAtucChanIntervalTransmittedBlksInfo PerfIntervalCount, hwAdslAtucChanIntervalCorrectedBlksInfo PerfIntervalCount, hwAdslAtucChanIntervalUncorrectBlksInfo PerfIntervalCount, hwAdslAturChanIntervalReceivedBlksInfo PerfIntervalCount, hwAdslAturChanIntervalTransmittedBlksInfo PerfIntervalCount, hwAdslAturChanIntervalCorrectedBlksInfo PerfIntervalCount, hwAdslAturChanIntervalUncorrectBlksInfo PerfIntervalCount, hwAdslAtucIntervalSesLInfo PerfIntervalCount, hwAdslAtucIntervalUasLInfo PerfIntervalCount, hwAdslAturIntervalSesLInfo PerfIntervalCount, hwAdslAturIntervalUasLInfo PerfIntervalCount, hwAdslPortCurrentActModeInfo INTEGER } hwAdslPort15minutesPerformanceIntervalIndex OBJECT-TYPE SYNTAX Integer32(0..96) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of the interval which is queried. Range: 0-96 " ::= { hwAdslPortPerformanceStatInfoEntry 1 } hwAdslPort15minutesPerformanceInBytesInfo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Read the received bytes of xDSL port during 15 minutes." ::= { hwAdslPortPerformanceStatInfoEntry 2 } hwAdslPort15minutesPerformanceOutBytesInfo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Read the transmitted bytes of xDSL port during 15 minutes." ::= { hwAdslPortPerformanceStatInfoEntry 3 } hwAdslPortSyncSuccNumberInfo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of successful activations within 15 minutes." ::= { hwAdslPortPerformanceStatInfoEntry 4 } hwAdslPortSyncFailNumberInfo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of failed activations within 15 minutes." ::= { hwAdslPortPerformanceStatInfoEntry 5 } hwAdslPortAtucCodeViolationInfo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Seconds of head errors of the ATUC cell within 15 minutes." ::= { hwAdslPortPerformanceStatInfoEntry 6 } hwAdslPortAturCodeViolationInfo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Seconds of the head errors of the ATUC cell within 15 minutes." ::= { hwAdslPortPerformanceStatInfoEntry 7 } hwAdslPortAtucFecSecondsInfo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Seconds of the ATUC FEC errors within 15 minutes." ::= { hwAdslPortPerformanceStatInfoEntry 8 } hwAdslPortAturFecSecondsInfo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Seconds of the ATUR FEC errors within 15 minutes." ::= { hwAdslPortPerformanceStatInfoEntry 9 } hwAdslPortCurrent15minutesTimeElapseInfo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Seconds that is passed within the current 15 minutes." ::= { hwAdslPortPerformanceStatInfoEntry 10 } hwAdslPortAtucHecDropCellsCntInfo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "ATUC cells discarded with HEC Errors." ::= { hwAdslPortPerformanceStatInfoEntry 11 } hwAdslPortAturHecDropCellsCntInfo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "ATUR cells discarded with HEC Errors." ::= { hwAdslPortPerformanceStatInfoEntry 12 } hwAdslLineConfProfileInfo OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of this object identifies the row in the ADSL Line Configuration Profile Table, (adslLineConfProfileTable), which applies for this ADSL line, and channels if applicable. For 'dynamic' mode, in the case which the configuration profile has not been set, the value will be set to 'DEFVAL'. If the implementator of this MIB has chosen not to implement 'dynamic assignment' of profiles, this object's MIN-ACCESS is read-only. " ::= { hwAdslPortPerformanceStatInfoEntry 13 } hwAdslPort15minUpTimeInfo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The up time in the interval. Unit: seconds " ::= { hwAdslPortPerformanceStatInfoEntry 14 } hwAdslAtucCurrAtnInfo OBJECT-TYPE SYNTAX Gauge32(0..630) UNITS "tenth dB" MAX-ACCESS read-only STATUS current DESCRIPTION "Measured difference in the total power transmitted by the peer ATU and the total power received by this ATU. Range: 0-630 Unit: tenth dB " ::= { hwAdslPortPerformanceStatInfoEntry 15 } hwAdslAtucCurrSnrMgnInfo OBJECT-TYPE SYNTAX Integer32 (-640..640) UNITS "tenth dB" MAX-ACCESS read-only STATUS current DESCRIPTION "Noise Margin as seen by this ATU with respect to its received signal. Unit: tenth dB " ::= { hwAdslPortPerformanceStatInfoEntry 16 } hwAdslAtucCurrAttainableRateInfo OBJECT-TYPE SYNTAX Gauge32 UNITS "bps" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the maximum currently attainable data rate by the ATU. This value will be equal or greater than the current line rate. Unit: bps " ::= { hwAdslPortPerformanceStatInfoEntry 17 } hwAdslAtucChanCurrTxRateInfo OBJECT-TYPE SYNTAX Gauge32 UNITS "bps" MAX-ACCESS read-only STATUS current DESCRIPTION "The actual transmitted rate on this channel. Unit: bps " ::= { hwAdslPortPerformanceStatInfoEntry 18 } hwAdslAturCurrAtnInfo OBJECT-TYPE SYNTAX Gauge32(0..630) UNITS "tenth dB" MAX-ACCESS read-only STATUS current DESCRIPTION "Measured difference in the total power transmitted by the peer ATU and the total power received by this ATU. Range: 0-630 Unit: tenth dB " ::= { hwAdslPortPerformanceStatInfoEntry 19 } hwAdslAturCurrSnrMgnInfo OBJECT-TYPE SYNTAX Integer32 (-640..640) UNITS "tenth dB" MAX-ACCESS read-only STATUS current DESCRIPTION "Noise Margin as seen by this ATU with respect to its received signal. Range: (-640)-(640) Unit: tenth dB " ::= { hwAdslPortPerformanceStatInfoEntry 20 } hwAdslAturCurrAttainableRateInfo OBJECT-TYPE SYNTAX Gauge32 UNITS "bps" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the maximum currently attainable data rate by the ATU. This value will be equal or greater than the current line rate. Unit: bps " ::= { hwAdslPortPerformanceStatInfoEntry 21 } hwAdslAturChanCurrTxRateInfo OBJECT-TYPE SYNTAX Gauge32 UNITS "bps" MAX-ACCESS read-only STATUS current DESCRIPTION "The actual transmitted rate on this channel. Unit: bps " ::= { hwAdslPortPerformanceStatInfoEntry 22 } hwAdslAtucIntervalESsInfo OBJECT-TYPE SYNTAX PerfIntervalCount UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Seconds of the ATU-C errors at the interval. Unit: seconds " ::= { hwAdslPortPerformanceStatInfoEntry 23 } hwAdslAtucIntervalLofsInfo OBJECT-TYPE SYNTAX PerfIntervalCount UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The count of seconds in the interval when there was Loss of Framing. Unit: seconds " ::= { hwAdslPortPerformanceStatInfoEntry 24 } hwAdslAtucIntervalLolsInfo OBJECT-TYPE SYNTAX PerfIntervalCount UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The count of seconds in the interval when there was Loss of Link. Unit: seconds " ::= { hwAdslPortPerformanceStatInfoEntry 25 } hwAdslAtucIntervalLossInfo OBJECT-TYPE SYNTAX PerfIntervalCount UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The count of seconds in the interval when there was Loss of Signal. Unit: seconds " ::= { hwAdslPortPerformanceStatInfoEntry 26 } hwAdslAtucIntervalLprsInfo OBJECT-TYPE SYNTAX PerfIntervalCount UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The count of seconds in the interval when there was Loss of Power. Unit: seconds " ::= { hwAdslPortPerformanceStatInfoEntry 27 } hwAdslAturIntervalESsInfo OBJECT-TYPE SYNTAX PerfIntervalCount UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Seconds of the ATU-R errors at the interval. Unit: seconds " ::= { hwAdslPortPerformanceStatInfoEntry 28 } hwAdslAturIntervalLofsInfo OBJECT-TYPE SYNTAX PerfIntervalCount UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The count of seconds in the interval when there was Loss of Framing. Unit: seconds " ::= { hwAdslPortPerformanceStatInfoEntry 29 } hwAdslAturIntervalLossInfo OBJECT-TYPE SYNTAX PerfIntervalCount UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The count of seconds in the interval when there was Loss of Signal. Unit: seconds " ::= { hwAdslPortPerformanceStatInfoEntry 30 } hwAdslAturIntervalLprsInfo OBJECT-TYPE SYNTAX PerfIntervalCount UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The count of seconds in the interval when there was Loss of Power. Unit: seconds " ::= { hwAdslPortPerformanceStatInfoEntry 31 } hwAdslAtucChanIntervalReceivedBlksInfo OBJECT-TYPE SYNTAX PerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "The count of all encoded blocks received on this channel during this interval. " ::= { hwAdslPortPerformanceStatInfoEntry 32 } hwAdslAtucChanIntervalTransmittedBlksInfo OBJECT-TYPE SYNTAX PerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "The count of all encoded blocks transmitted on this channel during this interval. " ::= { hwAdslPortPerformanceStatInfoEntry 33 } hwAdslAtucChanIntervalCorrectedBlksInfo OBJECT-TYPE SYNTAX PerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "The count of all blocks received with errors that were corrected on this channel during this interval. " ::= { hwAdslPortPerformanceStatInfoEntry 34 } hwAdslAtucChanIntervalUncorrectBlksInfo OBJECT-TYPE SYNTAX PerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "The count of all blocks received with uncorrectable errors on this channel during this interval. " ::= { hwAdslPortPerformanceStatInfoEntry 35 } hwAdslAturChanIntervalReceivedBlksInfo OBJECT-TYPE SYNTAX PerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "The count of all encoded blocks received on this channel during this interval. " ::= { hwAdslPortPerformanceStatInfoEntry 36 } hwAdslAturChanIntervalTransmittedBlksInfo OBJECT-TYPE SYNTAX PerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "The count of all encoded blocks transmitted on this channel during this interval. " ::= { hwAdslPortPerformanceStatInfoEntry 37 } hwAdslAturChanIntervalCorrectedBlksInfo OBJECT-TYPE SYNTAX PerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "The count of all blocks received with errors that were corrected on this channel during this interval. " ::= { hwAdslPortPerformanceStatInfoEntry 38 } hwAdslAturChanIntervalUncorrectBlksInfo OBJECT-TYPE SYNTAX PerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "The count of all blocks received with uncorrectable errors on this channel during this interval. " ::= { hwAdslPortPerformanceStatInfoEntry 39 } hwAdslAtucIntervalSesLInfo OBJECT-TYPE SYNTAX PerfIntervalCount UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "For the each interval, adslAtucIntervalSesL reports the number of seconds during which there have been severely errored seconds-line. Unit: seconds " ::= { hwAdslPortPerformanceStatInfoEntry 40 } hwAdslAtucIntervalUasLInfo OBJECT-TYPE SYNTAX PerfIntervalCount UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "For the each interval, adslAtucIntervalUasL reports the number of seconds during which there have been unavailable seconds-line. Unit: seconds " ::= { hwAdslPortPerformanceStatInfoEntry 41 } hwAdslAturIntervalSesLInfo OBJECT-TYPE SYNTAX PerfIntervalCount UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "For the each interval, adslAturIntervalSesL reports the number of seconds during which there have been severely errored seconds-line. Unit: seconds " ::= { hwAdslPortPerformanceStatInfoEntry 42 } hwAdslAturIntervalUasLInfo OBJECT-TYPE SYNTAX PerfIntervalCount UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "For the each interval, adslAturIntervalUasL reports the number of seconds during which there have been unavailable seconds-line. Unit: seconds " ::= { hwAdslPortPerformanceStatInfoEntry 43 } hwAdslPortCurrentActModeInfo OBJECT-TYPE SYNTAX INTEGER { adsl(1), adsl2(2), adsl2plus(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Instantaneous value of the technology type that line is currently trained up under. Options: 1. adsl(1) - Indicates that line is currently trained up under adsl type 2. adsl2(2) - Indicates that line is currently trained up under adsl2 type 2. adsl2plus(3) - Indicates that line is currently trained up under adsl2+ type " ::= { hwAdslPortPerformanceStatInfoEntry 44 } -- hwAdslPortRateChangeTrapParaTable hwadslPortRateChangeTrapParaInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF HwadslPortRateChangeTrapParaInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ADSL line rate change trap parameter table. The index of this table is ifIndex. " ::= { hwAdslMibObjects 23 } hwadslPortRateChangeTrapParaInfoEntry OBJECT-TYPE SYNTAX HwadslPortRateChangeTrapParaInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ADSL line rate change trap parameter table. The index of this entry is ifIndex. " INDEX { ifIndex } ::= { hwadslPortRateChangeTrapParaInfoTable 1 } HwadslPortRateChangeTrapParaInfoEntry ::= SEQUENCE{ hwAdslPortRateChangeTrapIPIAIDInfo OCTET STRING, hwAdslPortRateChangeTrapMUXIDInfo OCTET STRING, hwAdslPortRateChangeTrapTimeStampInfo Counter32, hwAdslPortRateChangeTrapDSLineRateInfo Gauge32, hwAdslPortRateChangeTrapUSLineRateInfo Gauge32, hwAdslPortRateChangeTrapEventTypeInfo OCTET STRING, hwAdslPortRateChangeTrapDslTypeInfo OCTET STRING } hwAdslPortRateChangeTrapIPIAIDInfo OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..63)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The port IPIAID is reported when the port rate changes." ::= { hwadslPortRateChangeTrapParaInfoEntry 1 } hwAdslPortRateChangeTrapMUXIDInfo OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..20)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The port MUXID is reported when the port rate changes. Range: 0-20 " ::= { hwadslPortRateChangeTrapParaInfoEntry 2 } hwAdslPortRateChangeTrapTimeStampInfo OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The time stamp of Line rate change trap. Standard Unix format; as the number of seconds since 1/1/1970. Unit:Seconds. " ::= { hwadslPortRateChangeTrapParaInfoEntry 3 } hwAdslPortRateChangeTrapDSLineRateInfo OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Down stream line rate after line rate change." ::= { hwadslPortRateChangeTrapParaInfoEntry 4 } hwAdslPortRateChangeTrapUSLineRateInfo OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Up stream line rate after line rate change." ::= { hwadslPortRateChangeTrapParaInfoEntry 5 } hwAdslPortRateChangeTrapEventTypeInfo OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..2)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Event type reported during the previous change of the rate If both the upstream and downstream rates change, this leaf outputs character string 'DU'. If only the upstream rates changes, this leaf outputs character string 'US'. If only the downstream rates changes, this leaf outputs character string 'DS'. " ::= { hwadslPortRateChangeTrapParaInfoEntry 6 } hwAdslPortRateChangeTrapDslTypeInfo OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..5)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "DSL line type of the port whose rate changes." ::= { hwadslPortRateChangeTrapParaInfoEntry 7 } -- hwadslSysManagementParaCfgTable hwadslSysManagementParaCfgTable OBJECT IDENTIFIER ::= { hwAdslMibObjects 24 } hwadslPortRateChangeTrapCfgConfig OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enables or disables ADSL port line-rate change trap feature. Options: 1. enabled(1) - ADSL port line-rate change trap feature is enabled 2. disabled(2) - ADSL port line-rate change trap feature is disabled " ::= { hwadslSysManagementParaCfgTable 1 } hwadsl2MaximumInterleavedDepth OBJECT-TYPE SYNTAX INTEGER { maxInterleavedDepth64(1), maxInterleavedDepth511(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Set the ADSL2 maximum interleaved depth function. Default values:maxInterleavedDepth511(2). Options: 1. maxInterleavedDepth64(1) - it means the interleaving depth up to 64 can be selected 2. maxInterleavedDepth511(2) - it means the interleaving depth up to 512 can be selected " ::= { hwadslSysManagementParaCfgTable 2 } -- hwadslAtucPerfDataInfoTable hwadslAtucPerfDataInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF HwadslAtucPerfDataInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of querying the performance statistics of the ATUC port. ADSL physical interfaces are those ifEntries where ifType is equal to adsl(94). The index of this table is ifIndex. " ::= { hwAdslMibObjects 25 } hwadslAtucPerfDataInfoEntry OBJECT-TYPE SYNTAX HwadslAtucPerfDataInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of querying the performance statistics of the ATUC port. ADSL physical interfaces are those ifEntries where ifType is equal to adsl(94). The index of this entry is ifIndex. " INDEX { ifIndex } ::= { hwadslAtucPerfDataInfoTable 1 } HwadslAtucPerfDataInfoEntry ::= SEQUENCE { hwAdslAtucPerfFailFullInitsInfo Counter32, hwAdslAtucPerfCurr15MinFailFullInitsInfo Counter32, hwAdslAtucPerfCurr1DayFailFullInitsInfo Counter32, hwAdslAtucPerfPrev1DayFailFullInitsInfo Counter32, hwAdslAtucPerfFullInitsInfo Counter32, hwAdslAtucPerfCurr15MinFullInitsInfo Counter32, hwAdslAtucPerfCurr1DayFullInitsInfo Counter32, hwAdslAtucPerfPrev1DayFullInitsInfo Counter32, hwAdslAtucPerfCurr15MLeftrs Counter32, hwAdslAtucPerfCurr15MEfb Counter32, hwAdslAtucPerfCurr15MMinEftr Counter32, hwAdslAtucPerfCurr1DayLeftrs Counter32, hwAdslAtucPerfCurr1DayEfb Counter32, hwAdslAtucPerfCurr1DayMinEftr Counter32, hwAdslAtucPerfPrev1DayLeftrs Counter32, hwAdslAtucPerfPrev1DayEfb Counter32, hwAdslAtucPerfPrev1DayMinEftr Counter32, hwAdslAtucPerfCurrEverBeforeLeftrs Counter32, hwAdslAtucPerfCurrEverBeforeEfb Counter32, hwAdslAtucPerfCurrEverBeforeMinEftr Counter32, hwAdslAtucPerfCurr15MStartTime DateAndTime, hwAdslAtucPerfCurr1DayStartTime DateAndTime, hwAdslAtucPerfCurr15MInmainpeq OCTET STRING, hwAdslAtucPerfCurr15MInmame Counter32, hwAdslAtucPerfCurr15MInmaiat OCTET STRING, hwAdslAtucPerfCurr1DayInmainpeq OCTET STRING, hwAdslAtucPerfCurr1DayInmame Counter32, hwAdslAtucPerfCurr1DayInmaiat OCTET STRING, hwAdslAtucPerfPre1DayInmainpeq OCTET STRING, hwAdslAtucPerfPre1DayInmame Counter32, hwAdslAtucPerfPre1DayInmaiat OCTET STRING, hwAdslAtucPerfCurrEverBeforeInmainpeq OCTET STRING, hwAdslAtucPerfCurrEverBeforeInmame Counter32, hwAdslAtucPerfCurrEverBeforeInmaiat OCTET STRING } hwAdslAtucPerfFailFullInitsInfo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of the line initialization failed attempts since agent reset." ::= { hwadslAtucPerfDataInfoEntry 1 } hwAdslAtucPerfCurr15MinFailFullInitsInfo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of the line initialization failed attempts in the current 15 minutes interval. " ::= { hwadslAtucPerfDataInfoEntry 2 } hwAdslAtucPerfCurr1DayFailFullInitsInfo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of the line initialization failed attempts in the day as measured by adslAtucPerfCurr1DayTimeElapsed. " ::= { hwadslAtucPerfDataInfoEntry 3 } hwAdslAtucPerfPrev1DayFailFullInitsInfo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of the line initialization failed attempts in the most recent previous 1-day period." ::= { hwadslAtucPerfDataInfoEntry 4 } hwAdslAtucPerfFullInitsInfo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the line initialization full attempts since agent reset." ::= { hwadslAtucPerfDataInfoEntry 5 } hwAdslAtucPerfCurr15MinFullInitsInfo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the line initialization full attempts in the current 15 minute interval. " ::= { hwadslAtucPerfDataInfoEntry 6 } hwAdslAtucPerfCurr1DayFullInitsInfo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the line initialization full attempts in the day as measured by adslAtucPerfCurr1DayTimeElapsed." ::= { hwadslAtucPerfDataInfoEntry 7 } hwAdslAtucPerfPrev1DayFullInitsInfo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the line initialization full attempts in the most recent previous 1-day period." ::= { hwadslAtucPerfDataInfoEntry 8 } hwAdslAtucPerfCurr15MLeftrs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "If retransmission is used in a given transmit direction, this parameter is a count of the seconds with a near-end leftr defect present observed over the current 15 minutes accumulation period. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1.1.6 7.2.1.1.6 " ::= { hwadslAtucPerfDataInfoEntry 9 } hwAdslAtucPerfCurr15MEfb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "If retransmission is used in a given transmit direction, this parameter is a count of the number of error-free bits observed over the current 15 minutes accumulation period. The near-end counter is only defined in upstream. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1.1.7 7.2.1.1.7 " ::= { hwadslAtucPerfDataInfoEntry 10 } hwAdslAtucPerfCurr15MMinEftr OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "If retransmission is used in a given transmit direction, this parameter MINEFTR reports the minimum of the EFTR(Error-free throughput rate) observed over the current 15 minutes accumulation period. The near-end value is only defined in upstream. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1.1.8 7.2.1.1.8 " ::= { hwadslAtucPerfDataInfoEntry 11 } hwAdslAtucPerfCurr1DayLeftrs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "If retransmission is used in a given transmit direction, this parameter is a count of the seconds with a near-end leftr defect present observed over the current 24 hours accumulation period. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1.1.6 7.2.1.1.6 " ::= { hwadslAtucPerfDataInfoEntry 12 } hwAdslAtucPerfCurr1DayEfb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "If retransmission is used in a given transmit direction, this parameter is a count of the number of error-free bits current observed over the current 24 hours accumulation period. The near-end counter is only defined in upstream. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1.1.7 7.2.1.1.7 " ::= { hwadslAtucPerfDataInfoEntry 13 } hwAdslAtucPerfCurr1DayMinEftr OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "If retransmission is used in a given transmit direction, this parameter MINEFTR reports the minimum of the EFTR(Error-free throughput rate) observed over the current 24 hours accumulation period. The near-end value is only defined in upstream. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1.1.8 7.2.1.1.8 " ::= { hwadslAtucPerfDataInfoEntry 14 } hwAdslAtucPerfPrev1DayLeftrs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "If retransmission is used in a given transmit direction, this parameter is a count of the seconds with a near-end leftr defect present over the previous 24 hours accumulation period during this interval. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1.1.6 7.2.1.1.6 " ::= { hwadslAtucPerfDataInfoEntry 15 } hwAdslAtucPerfPrev1DayEfb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "If retransmission is used in a given transmit direction, this parameter is a count of the number of error-free bits observed over the previous 24 hours accumulation period during this interval. The near-end counter is only defined in upstream. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1.1.7 7.2.1.1.7 " ::= { hwadslAtucPerfDataInfoEntry 16 } hwAdslAtucPerfPrev1DayMinEftr OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "If retransmission is used in a given transmit direction, this parameter MINEFTR reports the minimum of the EFTR(Error-free throughput rate) observed over the previous 24 hours accumulation period during this interval. The near-end value is only defined in upstream. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1.1.8 7.2.1.1.8 " ::= { hwadslAtucPerfDataInfoEntry 17 } hwAdslAtucPerfCurrEverBeforeLeftrs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "If retransmission is used in a given transmit direction, this parameter is a count of the seconds with a near-end leftr defect present observed ever before. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1.1.6 7.2.1.1.6 " ::= { hwadslAtucPerfDataInfoEntry 18 } hwAdslAtucPerfCurrEverBeforeEfb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "If retransmission is used in a given transmit direction, this parameter is a count of the number of error-free bits observed ever before. The near-end counter is only defined in upstream. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1.1.7 7.2.1.1.7 " ::= { hwadslAtucPerfDataInfoEntry 19 } hwAdslAtucPerfCurrEverBeforeMinEftr OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "If retransmission is used in a given transmit direction, this parameter MINEFTR reports the minimum of the EFTR(Error-free throughput rate) observed ever before. The near-end value is only defined in upstream. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1.1.8 7.2.1.1.8 " ::= { hwadslAtucPerfDataInfoEntry 20 } hwAdslAtucPerfCurr15MStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Start time of the current 15-minute performance statistics." ::= { hwadslAtucPerfDataInfoEntry 21 } hwAdslAtucPerfCurr1DayStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Start time of the current 1-day performance statistics." ::= { hwadslAtucPerfDataInfoEntry 22 } hwAdslAtucPerfCurr15MInmainpeq OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..68)) MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is a count of the INMAINPEQi anomalies occurring on the line during current 15 minutes. Each INMAINPEQ needs 4 bytes. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { hwadslAtucPerfDataInfoEntry 23 } hwAdslAtucPerfCurr15MInmame OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is a count of the INMAME anomalies occurring on the line during current 15 minutes. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { hwadslAtucPerfDataInfoEntry 24 } hwAdslAtucPerfCurr15MInmaiat OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is a count of the INMAIATi anomalies occurring on the line during current 15 minutes. Each INMAIAT needs 4 bytes. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { hwadslAtucPerfDataInfoEntry 25 } hwAdslAtucPerfCurr1DayInmainpeq OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..68)) MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is a count of the INMAINPEQi anomalies occurring on the line during current 1 day. Each INMAINPEQ needs 4 bytes. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { hwadslAtucPerfDataInfoEntry 26 } hwAdslAtucPerfCurr1DayInmame OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is a count of the INMAME anomalies occurring on the line during current 1 day. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { hwadslAtucPerfDataInfoEntry 27 } hwAdslAtucPerfCurr1DayInmaiat OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is a count of the INMAIATi anomalies occurring on the line during current 1 day. Each INMAIAT needs 4 bytes. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { hwadslAtucPerfDataInfoEntry 28 } hwAdslAtucPerfPre1DayInmainpeq OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..68)) MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is a count of the INMAINPEQi anomalies occurring on the line during the most recent previous 1-day period. Each INMAINPEQ needs 4 bytes. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { hwadslAtucPerfDataInfoEntry 29 } hwAdslAtucPerfPre1DayInmame OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is a count of the INMAME anomalies occurring on the line during the most recent previous 1-day period. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { hwadslAtucPerfDataInfoEntry 30 } hwAdslAtucPerfPre1DayInmaiat OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is a count of the INMAIATi anomalies occurring on the line during the most recent previous 1-day period. Each INMAIAT needs 4 bytes. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { hwadslAtucPerfDataInfoEntry 31 } hwAdslAtucPerfCurrEverBeforeInmainpeq OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..68)) MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is a count of the INMAINPEQi anomalies occurring on the line ever before. Each INMAINPEQ needs 4 bytes. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { hwadslAtucPerfDataInfoEntry 32 } hwAdslAtucPerfCurrEverBeforeInmame OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is a count of the INMAME anomalies occurring on the line ever before. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { hwadslAtucPerfDataInfoEntry 33 } hwAdslAtucPerfCurrEverBeforeInmaiat OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is a count of the INMAIATi anomalies occurring on the line ever before. Each INMAIAT needs 4 bytes. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { hwadslAtucPerfDataInfoEntry 34 } -- hwadslAtucIntervalInfoTable hwadslAtucIntervalInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF HwadslAtucIntervalInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides one row for each ATUC performance data collection interval. ADSL physical interfaces are those ifEntries where ifType is equal to adsl(94). The index of this table is ifIndex. " ::= { hwAdslMibObjects 26 } hwadslAtucIntervalInfoEntry OBJECT-TYPE SYNTAX HwadslAtucIntervalInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides one row for each ATUC performance data collection interval. ADSL physical interfaces are those ifEntries where ifType is equal to adsl(94). The index of this entry is ifIndex. " INDEX { ifIndex, adslAtucIntervalNumber } ::= { hwadslAtucIntervalInfoTable 1 } HwadslAtucIntervalInfoEntry ::= SEQUENCE { hwAdslAtucIntervalFailFullInitsInfo Counter32, hwAdslAtucIntervalFullInitsInfo Counter32, hwAdslAtucIntervalLeftrs Counter32, hwAdslAtucIntervalEfb Counter32, hwAdslAtucIntervalMinEftr Counter32, hwAdslAtucIntervalStartTime DateAndTime, hwAdslAtucIntervalInmainpeq OCTET STRING, hwAdslAtucIntervalInmame Counter32, hwAdslAtucIntervalInmaiat OCTET STRING } hwAdslAtucIntervalFailFullInitsInfo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of the line initialization failed attempts during the interval." ::= { hwadslAtucIntervalInfoEntry 1 } hwAdslAtucIntervalFullInitsInfo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the line initialization full attempts during the interval." ::= { hwadslAtucIntervalInfoEntry 2 } hwAdslAtucIntervalLeftrs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "If retransmission is used in a given transmit direction, this parameter is a count of the seconds with a near-end leftr defect present observed over the previous 15 minutes accumulation period during the interval. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1.1.6 7.2.1.1.6" ::= { hwadslAtucIntervalInfoEntry 3 } hwAdslAtucIntervalEfb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "If retransmission is used in a given transmit direction, this parameter is a count of the number of error-free bits observed over the previous 15 minutes accumulation period during the interval. The near-end counter is only defined in upstream. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1.1.6 7.2.1.1.7" ::= { hwadslAtucIntervalInfoEntry 4 } hwAdslAtucIntervalMinEftr OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "If retransmission is used in a given transmit direction, this parameter MINEFTR reports the minimum of the EFTR(Error-free throughput rate) observed over the previous 15 minutes accumulation period during the interval. The near-end value is only defined in upstream. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1.1.6 7.2.1.1.8" ::= { hwadslAtucIntervalInfoEntry 5 } hwAdslAtucIntervalStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Start time of the historical 15-minute performance statistics." ::= { hwadslAtucIntervalInfoEntry 6 } hwAdslAtucIntervalInmainpeq OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..68)) MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is a count of the INMAINPEQi anomalies occurring on the line at 15 minutes interval. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { hwadslAtucIntervalInfoEntry 7 } hwAdslAtucIntervalInmame OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is a count of the INMAME anomalies occurring on the line at 15 minutes interval. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { hwadslAtucIntervalInfoEntry 8} hwAdslAtucIntervalInmaiat OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is a count of the INMAIATi anomalies occurring on the line at 15 minutes interval. Each INMAIAT needs 4 bytes. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { hwadslAtucIntervalInfoEntry 9} -- adslAtucChanIntervalTable hwadslAtucChanIntervalInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF HwadslAtucChanIntervalInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Period table of collecting the ATUC channel performance data This table is used to query the ATUC channel performance data collected in each period (a day is divided into 96 15-minute periods). The indexes of this table are ifIndex and adslAtucChanIntervalNumber. " ::= { hwAdslMibObjects 28 } hwadslAtucChanIntervalInfoEntry OBJECT-TYPE SYNTAX HwadslAtucChanIntervalInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Period table of collecting the ATUC channel performance data This table is used to query the ATUC channel performance data collected in each period (a day is divided into 96 15-minute periods). The indexes of this entry are ifIndex and adslAtucChanIntervalNumber. " INDEX { ifIndex, adslAtucChanIntervalNumber } ::= { hwadslAtucChanIntervalInfoTable 1 } HwadslAtucChanIntervalInfoEntry ::= SEQUENCE { hwadslAtucChanIntervalFecBlksInfo PerfIntervalCount, hwadslAtucChanIntervalHecBlksInfo PerfIntervalCount, hwadslAtucChanIntervalCrcBlksInfo PerfIntervalCount, hwadslAtucChanIntervalRtxCWInfo Gauge32, hwadslAtucChanIntervalRtxCorrectedCWInfo Gauge32, hwadslAtucChanIntervalRtxUncorrectedCWInfo Gauge32, hwAdslAtucChanIntervalStartTime DateAndTime } hwadslAtucChanIntervalFecBlksInfo OBJECT-TYPE SYNTAX PerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "The count of all blocks received with FRC anomalies on this channel during this interval. " ::= { hwadslAtucChanIntervalInfoEntry 1 } hwadslAtucChanIntervalHecBlksInfo OBJECT-TYPE SYNTAX PerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "The count of all blocks received with HRC anomalies on this channel during this interval. " ::= { hwadslAtucChanIntervalInfoEntry 2 } hwadslAtucChanIntervalCrcBlksInfo OBJECT-TYPE SYNTAX PerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "The count of all blocks received with CRC anomalies on this channel during this interval. " ::= { hwadslAtucChanIntervalInfoEntry 3 } hwadslAtucChanIntervalRtxCWInfo OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of units request retransmission on this channel during this interval." ::= { hwadslAtucChanIntervalInfoEntry 4 } hwadslAtucChanIntervalRtxCorrectedCWInfo OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of units corrected by retransmission on this channel during this interval." ::= { hwadslAtucChanIntervalInfoEntry 5 } hwadslAtucChanIntervalRtxUncorrectedCWInfo OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of units uncorrected by retransmission on this channel during this interval." ::= { hwadslAtucChanIntervalInfoEntry 6 } hwAdslAtucChanIntervalStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Start time of the historical 15-minute performance statistics." ::= { hwadslAtucChanIntervalInfoEntry 7 } --hwAdsl2SCStatusInfoTable hwAdsl2SCStatusInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF HwAdsl2SCStatusInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table hwAdsl2SCStatusInfoTable contains status parameters of the ADSL2 sub-carriers. The indexes of this table are ifIndex and hwAdsl2SCStatusDirectionInfo. " ::= { hwAdslMibObjects 29 } hwAdsl2SCStatusInfoEntry OBJECT-TYPE SYNTAX HwAdsl2SCStatusInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table hwAdsl2SCStatusInfoTable contains status parameters of the ADSL2 sub-carriers. The indexes of this entry are ifIndex and hwAdsl2SCStatusDirectionInfo. " INDEX { ifIndex, hwAdsl2SCStatusDirectionInfo } ::= { hwAdsl2SCStatusInfoTable 1 } HwAdsl2SCStatusInfoEntry ::= SEQUENCE { hwAdsl2SCStatusDirectionInfo INTEGER, hwAdsl2SCStatusSnrInfo OCTET STRING, hwAdsl2SCStatusBitsAllocInfo OCTET STRING, hwAdsl2SCStatusGainAllocInfo OCTET STRING, hwAdsl2SCStatusLogInfo OCTET STRING, hwAdsl2SCStatusQlnInfo OCTET STRING, hwAdsl2SCStatusSnrMarginInfo OCTET STRING, hwAdsl2SCStatusTxPSDInfo OCTET STRING } hwAdsl2SCStatusDirectionInfo OBJECT-TYPE SYNTAX INTEGER { upstream(1), downstream(2) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "The direction of the sub-carrier is either upstream or downstream. Options: 1. upstream(1) - The direction of the sub-carrier is upstream 2. downstream(2) - The direction of the sub-carrier is downstream " ::= { hwAdsl2SCStatusInfoEntry 1 } hwAdsl2SCStatusSnrInfo OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..512)) MAX-ACCESS read-only STATUS current DESCRIPTION "The SNR Margin per sub-carrier, expressing the ratio between the received signal power and received noise power per subscriber. It is an array of 512 octets, designed for supporting up to 512 (downstream) sub-carriers. The number of utilized octets on downstream direction depends on NSCds, and on upstream direction it depends on NSCus. This value is referred to here as NSC. Octet i (0 <= i < NSC) is set to a value in the range 0 to 254 to indicate that the respective downstream or upstream sub- carrier i has SNR of: (-32 + Adsl2SubcarrierSnr(i)/2) in dB (i.e., -32 to 95dB). The special value 255 means that no measurement could be done for the subcarrier because it is out of the PSD mask passband or that the noise PSD is out of range to be represented. Each value in this array is 8 bits wide. " ::= { hwAdsl2SCStatusInfoEntry 2 } hwAdsl2SCStatusBitsAllocInfo OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "The bits allocation per sub-carrier. An array of 256 octets (512 nibbles), designed for supporting up to 512 (downstream) sub-carriers. The number of utilized nibbles on downstream direction depends on NSCds, and on upstream direction it depends on NSCus. This value is referred to here as NSC. Nibble i (0 <= i < NSC) is set to a value in the range 0 to 15 to indicate that the respective downstream or upstream sub-carrier i has the same amount of bits allocation. " ::= { hwAdsl2SCStatusInfoEntry 3 } hwAdsl2SCStatusGainAllocInfo OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..1024)) MAX-ACCESS read-only STATUS current DESCRIPTION "The gain allocation per sub-carrier. An array of 512 16-bits values, designed for supporting up to 512 (downstream) sub- carriers. The number of utilized octets on downstream direction depends on NSCds, and on upstream direction it depends on NSCus. This value is referred to here as NSC. Value i (0 <= i < NSC) is in the range 0 to 4093 to indicate that the respective downstream or upstream sub-carrier i has the same amount of gain value. The gain value is represented as a multiple of 1/512 on a linear scale. Each value in this array is 16 bits wide and is stored in big endian format. " ::= { hwAdsl2SCStatusInfoEntry 4 } hwAdsl2SCStatusLogInfo OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..1024)) MAX-ACCESS read-only STATUS current DESCRIPTION "An array of up to 512 real H(f) logarithmic representation values in dB for the respective transmission direction. It is designed to support up to 512 (downstream) sub-carriers. The number of utilized values on downstream direction depends on NSCds, and on upstream direction it depends on NSCus. This value is referred to here as NSC. Each array entry represents the real Hlog(f = i*Df) value for a particular sub-carrier index i, (0 <= i < NSC). The real Hlog(f) value is represented as (6-m(i)/10), with m(i) in the range 0 to 1022. A special value m=1023 indicates that no measurement could be done for the subcarrier because it is out of the passband or that the attenuation is out of range to be represented. This parameter is applicable in loop diagnostic procedure and initialization. Each value in this array is 16 bits wide and is stored in big endian format. " ::= { hwAdsl2SCStatusInfoEntry 5 } hwAdsl2SCStatusQlnInfo OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..512)) MAX-ACCESS read-only STATUS current DESCRIPTION "An array of up to 512 real Quiet Line Noise values in dBm/Hz for the respective transmission direction. It is designed for up to 512 (downstream) sub-carriers. The number of utilized values on downstream direction depends on NSCds, and on upstream direction it depends on NSCus. This value is referred to here as NSC. Each array entry represents the QLN(f = i*Df) value for a particular sub-carrier index i, (0 <= i < NSC). The QLN(f) is represented as (-23-n(i)/2), with n(i) in the range 0 to 254. A special value n(i)=255 indicates that no measurement could be done for the subcarrier because it is out of the passband or that the noise PSD is out of range to be represented. This parameter is applicable in loop diagnostic procedure and initialization. Each value in this array is 8 bits wide. " ::= { hwAdsl2SCStatusInfoEntry 6 } hwAdsl2SCStatusSnrMarginInfo OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..1024)) MAX-ACCESS read-only STATUS current DESCRIPTION "SNR Margin is the maximum increase in dB of the noise power received at the ATU (ATU-R on downstream direction and ATU-C on upstream direction), such that the BER requirements are met for all bearer channels received at the ATU. It ranges from -640 to 630 units of 0.1 dB (physical values are -64 to 63 dB). " ::= { hwAdsl2SCStatusInfoEntry 7 } hwAdsl2SCStatusTxPSDInfo OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..1024)) MAX-ACCESS read-only STATUS current DESCRIPTION "The PSD MASK per sub-carrier. An array of 512 16-bits values, designed for supporting up to 512 (downstream) sub-carriers. It ranges from -1400 to -300 units of 0.1 dBm/Hz (physical values are -140 to -30 dBm/Hz) " ::= { hwAdsl2SCStatusInfoEntry 8 } --hwxdslDynamicProfCfgTable hwxdslDynamicProfCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF HwxdslDynamicProfCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table includes common parameters of the xDSL Dynamic profile. The index of this table is hwxdslDynamicProfProfileNameCfg. " ::= { hwAdslMibObjects 30 } hwxdslDynamicProfCfgEntry OBJECT-TYPE SYNTAX HwxdslDynamicProfCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table includes common parameters of the xDSL Dynamic profile. The index of this entry is hwxdslDynamicProfProfileNameCfg. " INDEX {hwxdslDynamicProfProfileNameCfg } ::= { hwxdslDynamicProfCfgTable 1 } HwxdslDynamicProfCfgEntry ::= SEQUENCE { hwxdslDynamicProfProfileNameCfg OCTET STRING, hwxdslDynamicProfXtuTransSysEnaCfg BITS, hwxdslDynamicProfBitSwapDSCfg INTEGER, hwxdslDynamicProfBitSwapUSCfg INTEGER, hwxdslDynamicProfTargetSnrmDsCfg Unsigned32, hwxdslDynamicProfTargetSnrmUsCfg Unsigned32, hwxdslDynamicProfMaxSnrmDsCfg Unsigned32, hwxdslDynamicProfMaxSnrmUsCfg Unsigned32, hwxdslDynamicProfMinSnrmDsCfg Unsigned32, hwxdslDynamicProfMinSnrmUsCfg Unsigned32, hwxdslDynamicProfCh1MinProtectionDsCfg INTEGER, hwxdslDynamicProfCh1MinProtectionUsCfg INTEGER, hwxdslDynamicProfCh1MaxDelayDsCfg Unsigned32, hwxdslDynamicProfCh1MaxDelayUsCfg Unsigned32, hwxdslDynamicProfCh2MinProtectionDsCfg INTEGER, hwxdslDynamicProfCh2MinProtectionUsCfg INTEGER, hwxdslDynamicProfCh2MaxDelayDsCfg Unsigned32, hwxdslDynamicProfCh2MaxDelayUsCfg Unsigned32, hwxdslDynamicProfPmModeCfg BITS, hwxdslDynamicProfL0TimeCfg Unsigned32, hwxdslDynamicProfL2TimeCfg Unsigned32, hwxdslDynamicProfL2AtprCfg Unsigned32, hwxdslDynamicProfL2AtprtCfg Unsigned32, hwxdslDynamicProfDpboEPsdCfg OCTET STRING, hwxdslDynamicProfDpboEsELCfg Unsigned32, hwxdslDynamicProfDpboEscmCfg OCTET STRING, hwxdslDynamicProfDpboMusCfg Unsigned32, hwxdslDynamicProfDpboFMinCfg Unsigned32, hwxdslDynamicProfDpboFMaxCfg Unsigned32, hwxdslDynamicProfUpboPsdBandCfg OCTET STRING, hwxdslDynamicProfUpboKLFCfg INTEGER, hwxdslDynamicProfUpboKLCfg Unsigned32, hwxdslDynamicProfRfiBandsCfg OCTET STRING, hwxdslDynamicProfToneBlackOutCfg OCTET STRING, hwxdslDynamicProfCarMaskDSCfg OCTET STRING, hwxdslDynamicProfCarMaskUSCfg OCTET STRING, hwxdslDynamicProfXdslModeCfg INTEGER, hwxdslDynamicProfMaxNomPsdDsCfg Integer32, hwxdslDynamicProfMaxNomPsdUsCfg Integer32, hwxdslDynamicProfMaxNomAtpDsCfg Unsigned32, hwxdslDynamicProfMaxNomAtpUsCfg Unsigned32, hwxdslDynamicProfPsdMaskDsCfg OCTET STRING, hwxdslDynamicProfPsdMaskUsCfg OCTET STRING, hwxdslDynamicProfLimitMaskCfg INTEGER, hwxdslDynamicProfClassMaskCfg INTEGER, hwxdslDynamicProfBandOptUsageCfg INTEGER, hwxdslDynamicProfVirtualNoiseModeDsCfg INTEGER, hwxdslDynamicProfVirtualNoiseModeUsCfg INTEGER, hwxdslDynamicProfVirtualNoiseDsCfg OCTET STRING, hwxdslDynamicProfVirtualNoiseUsCfg OCTET STRING, hwxdslDynamicProfRowStatusCfg RowStatus } hwxdslDynamicProfProfileNameCfg OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The name of xDSL Dynamic Profile." ::= { hwxdslDynamicProfCfgEntry 1 } hwxdslDynamicProfXtuTransSysEnaCfg OBJECT-TYPE SYNTAX BITS { ansit1413(0), etsi(1), g9921PotsNonOverlapped(2), g9921PotsOverlapped(3), g9921IsdnNonOverlapped(4), g9921isdnOverlapped(5), g9921tcmIsdnNonOverlapped(6), g9921tcmIsdnOverlapped(7), g9922potsNonOverlapped(8), g9922potsOverlapped(9), g9922tcmIsdnNonOverlapped(10), g9922tcmIsdnOverlapped(11), g9921tcmIsdnSymmetric(12), reserved1(13), reserved2(14), reserved3(15), reserved4(16), reserved5(17), g9923PotsNonOverlapped(18), g9923PotsOverlapped(19), g9923IsdnNonOverlapped(20), g9923isdnOverlapped(21), reserved6(22), reserved7(23), g9924potsNonOverlapped(24), g9924potsOverlapped(25), reserved8(26), reserved9(27), g9923AnnexIAllDigNonOverlapped(28), g9923AnnexIAllDigOverlapped(29), g9923AnnexJAllDigNonOverlapped(30), g9923AnnexJAllDigOverlapped(31), g9924AnnexIAllDigNonOverlapped(32), g9924AnnexIAllDigOverlapped(33), g9923AnnexLMode1NonOverlapped(34), g9923AnnexLMode2NonOverlapped(35), g9923AnnexLMode3Overlapped(36), g9923AnnexLMode4Overlapped(37), g9923AnnexMPotsNonOverlapped(38), g9923AnnexMPotsOverlapped(39), g9925PotsNonOverlapped(40), g9925PotsOverlapped(41), g9925IsdnNonOverlapped(42), g9925isdnOverlapped(43), reserved10(44), reserved11(45), g9925AnnexIAllDigNonOverlapped(46), g9925AnnexIAllDigOverlapped(47), g9925AnnexJAllDigNonOverlapped(48), g9925AnnexJAllDigOverlapped(49), g9925AnnexMPotsNonOverlapped(50), g9925AnnexMPotsOverlapped(51), reserved12(52), reserved13(53), reserved14(54), reserved15(55), reserved16(56), reserved17(57), reserved18(58), reserved19(59), reserved20(60), reserved21(61), reserved22(62), reserved23(63), reserved24(64), reserved25(65), reserved26(66), reserved27(67), reserved28(68), reserved29(69), reserved30(70), reserved31(71), g9932AnnexAPots(72), g9932AnnexAIsdn(73), g9932AnnexBPots(74), g9932AnnexBIsdn(75), g9932AnnexCPots(76), g9932AnnexCIsdn(77), reserved32(78), reserved33(79) } MAX-ACCESS read-create STATUS current DESCRIPTION "XTU Transmission System Enabling (ATSE). A list of the different coding types enabled in this profile. It is coded in a bit-map representation with 1 or more bits set. A bit set to '1' means that the XTUs may apply the respective coding for the xDSL line. A bit set to '0' means that the XTUs cannot apply the respective coding for the XDSL line. All 'reserved' bits should be set to '0'. " ::= { hwxdslDynamicProfCfgEntry 2 } hwxdslDynamicProfBitSwapDSCfg OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2), invalidValue(-1) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enables or disables the bit swap downstream of a line. Options: 1. disable(1) - The bit swap downstream of a line is disabled 2. enable(2) - The bit swap downstream of a line is enabled 3. invalidValue(-1) - Invalid value " ::= { hwxdslDynamicProfCfgEntry 3 } hwxdslDynamicProfBitSwapUSCfg OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2), invalidValue(-1) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enables or disables the bit swap upstream of a line. Options: 1. disable(1) - The bit swap upstream of a line is disabled 2. enable(2) - The bit swap upstream of a line is enabled 3. invalidValue(-1) - Invalid value " ::= { hwxdslDynamicProfCfgEntry 4 } hwxdslDynamicProfTargetSnrmDsCfg OBJECT-TYPE SYNTAX Unsigned32(0..310) UNITS "0.1 dB" MAX-ACCESS read-create STATUS current DESCRIPTION "The target Noise Margin the xTU-R receiver shall achieve, relative to the BER requirement for each of the downstream bearer channels, to successfully complete initialization. The target noise margin ranges from 0 to 310 units of 0.1 dB (Physical values are 0 to 31 dB). Range: 0-310 Unit: 0.1 dB " ::= { hwxdslDynamicProfCfgEntry 5 } hwxdslDynamicProfTargetSnrmUsCfg OBJECT-TYPE SYNTAX Unsigned32(0..310) UNITS "0.1 dB" MAX-ACCESS read-create STATUS current DESCRIPTION "The target Noise Margin the xTU-C receiver shall achieve, relative to the BER requirement for each of the downstream bearer channels, to successfully complete initialization. The target noise margin ranges from 0 to 310 units of 0.1 dB (Physical values are 0 to 31 dB). Range: 0-310 Unit: 0.1 dB " ::= { hwxdslDynamicProfCfgEntry 6 } hwxdslDynamicProfMaxSnrmDsCfg OBJECT-TYPE SYNTAX Unsigned32(0..310) UNITS "0.1 dB" MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum Noise Margin the xTU-R receiver shall achieve, relative to the BER requirement for each of the downstream bearer channels, to successfully complete initialization. The target noise margin ranges from 0 to 310 units of 0.1 dB (Physical values are 0 to 31 dB). Range: 0-310 Unit: 0.1 dB " ::= { hwxdslDynamicProfCfgEntry 7 } hwxdslDynamicProfMaxSnrmUsCfg OBJECT-TYPE SYNTAX Unsigned32(0..310) UNITS "0.1 dB" MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum Noise Margin the xTU-C receiver shall achieve, relative to the BER requirement for each of the downstream bearer channels, to successfully complete initialization. The target noise margin ranges from 0 to 310 units of 0.1 dB (Physical values are 0 to 31 dB). Range: 0-310 Unit: 0.1 dB " ::= { hwxdslDynamicProfCfgEntry 8 } hwxdslDynamicProfMinSnrmDsCfg OBJECT-TYPE SYNTAX Unsigned32(0..310) UNITS "0.1 dB" MAX-ACCESS read-create STATUS current DESCRIPTION "The minimum Noise Margin the xTU-R receiver shall achieve, relative to the BER requirement for each of the downstream bearer channels, to successfully complete initialization. The target noise margin ranges from 0 to 310 units of 0.1 dB (Physical values are 0 to 31 dB). Range: 0-310 Unit: 0.1 dB " ::= { hwxdslDynamicProfCfgEntry 9 } hwxdslDynamicProfMinSnrmUsCfg OBJECT-TYPE SYNTAX Unsigned32(0..310) UNITS "0.1 dB" MAX-ACCESS read-create STATUS current DESCRIPTION "The minimum Noise Margin the xTU-C receiver shall achieve, relative to the BER requirement for each of the downstream bearer channels, to successfully complete initialization. The target noise margin ranges from 0 to 310 units of 0.1 dB (Physical values are 0 to 31 dB). Range: 0-310 Unit: 0.1 dB " ::= { hwxdslDynamicProfCfgEntry 10 } hwxdslDynamicProfCh1MinProtectionDsCfg OBJECT-TYPE SYNTAX INTEGER { noProtection (1), halfSymbol (2), singleSymbol (3), twoSymbols (4), threeSymbols (5), fourSymbols (6), fiveSymbols (7), sixSymbols (8), sevenSymbols (9), eightSymbols (10), nineSymbols (11), tenSymbols (12), elevenSymbols (13), twelveSymbols (14), thirteenSymbols (15), fourteenSymbols (16), fifteenSymbols (17), sixteenSymbols (18), invalidValue(-1) } MAX-ACCESS read-create STATUS current DESCRIPTION "Minimum Impulse Noise Protection on Downstream direction. The minimum impulse noise protection for the bearer channel, expressed in symbols. The parameter can take the following values: noProtection (i.e., INP not required), halfSymbol (i.e., INP length is 1/2 symbol) and 1-16 symbols in steps of 1 symbol. Options: 1. noProtection (1) - Indicates that the INP value is 0 2. halfSymbol (2) - Indicates that the INP value is 0.5 3. singleSymbol (3) - Indicates that the INP value is 1 4. twoSymbols (4) - Indicates that the INP value is 2 5. threeSymbols (5) - Indicates that the INP value is 3 6. fourSymbols (6) - Indicates that the INP value is 4 7. fiveSymbols (7) - Indicates that the INP value is 5 8. sixSymbols (8) - Indicates that the INP value is 6 9. sevenSymbols (9) - Indicates that the INP value is 7 10. eightSymbols (10) - Indicates that the INP value is 8 11. nineSymbols (11) - Indicates that the INP value is 9 12. tenSymbols (12) - Indicates that the INP value is 10 13. elevenSymbols (13) - Indicates that the INP value is 11 14. twelveSymbols (14) - Indicates that the INP value is 12 15. thirteenSymbols (15) - Indicates that the INP value is 13 16. fourteenSymbols (16) - Indicates that the INP value is 14 17. fifteenSymbols (17) - Indicates that the INP value is 15 18. sixteenSymbols (18) - Indicates that the INP value is 16 19. invalidValue(-1) - Invalid value " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.3" ::= { hwxdslDynamicProfCfgEntry 11 } hwxdslDynamicProfCh1MinProtectionUsCfg OBJECT-TYPE SYNTAX INTEGER { noProtection (1), halfSymbol (2), singleSymbol (3), twoSymbols (4), threeSymbols (5), fourSymbols (6), fiveSymbols (7), sixSymbols (8), sevenSymbols (9), eightSymbols (10), nineSymbols (11), tenSymbols (12), elevenSymbols (13), twelveSymbols (14), thirteenSymbols (15), fourteenSymbols (16), fifteenSymbols (17), sixteenSymbols (18), invalidValue(-1) } MAX-ACCESS read-create STATUS current DESCRIPTION "Minimum Impulse Noise Protection on Upstream direction. The minimum impulse noise protection for the bearer channel, expressed in symbols. The parameter can take the following values: noProtection (i.e., INP not required), halfSymbol (i.e., INP length is 1/2 symbol) and 1-16 symbols in steps of 1 symbol. Options: 1. noProtection (1) - Indicates that the INP value is 0 2. halfSymbol (2) - Indicates that the INP value is 0.5 3. singleSymbol (3) - Indicates that the INP value is 1 4. twoSymbols (4) - Indicates that the INP value is 2 5. threeSymbols (5) - Indicates that the INP value is 3 6. fourSymbols (6) - Indicates that the INP value is 4 7. fiveSymbols (7) - Indicates that the INP value is 5 8. sixSymbols (8) - Indicates that the INP value is 6 9. sevenSymbols (9) - Indicates that the INP value is 7 10. eightSymbols (10) - Indicates that the INP value is 8 11. nineSymbols (11) - Indicates that the INP value is 9 12. tenSymbols (12) - Indicates that the INP value is 10 13. elevenSymbols (13) - Indicates that the INP value is 11 14. twelveSymbols (14) - Indicates that the INP value is 12 15. thirteenSymbols (15) - Indicates that the INP value is 13 16. fourteenSymbols (16) - Indicates that the INP value is 14 17. fifteenSymbols (17) - Indicates that the INP value is 15 18. sixteenSymbols (18) - Indicates that the INP value is 16 19. invalidValue(-1) - Invalid value " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.3" ::= { hwxdslDynamicProfCfgEntry 12 } hwxdslDynamicProfCh1MaxDelayDsCfg OBJECT-TYPE SYNTAX Unsigned32(0..200) UNITS "milliseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "Maximum Interleave Delay on Downstream direction. The maximum one-way interleaving delay introduced by the PMS-TC on Downstream direction. The XTUs shall choose the S (factor) and D (depth) values such that the actual one-way interleaving delay is as close as possible to, but less than or equal to, hwxdslDynamicProfCh1MaxDelayDs. The delay is coded in ms, with the value 0 indicating no delay bound is being imposed. Range: 0-200 Unit: milliseconds " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.2" ::= { hwxdslDynamicProfCfgEntry 13 } hwxdslDynamicProfCh1MaxDelayUsCfg OBJECT-TYPE SYNTAX Unsigned32(0..200) UNITS "milliseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "Maximum Interleave Delay on Upstream direction. The maximum one-way interleaving delay introduced by the PMS-TC on Upstream direction. The XTUs shall choose the S (factor) and D (depth) values such that the actual one-way interleaving delay is as close as possible to, but less than or equal to, hwxdslDynamicProfCh1MaxDelayUs. The delay is coded in ms, with the value 0 indicating no delay bound is being imposed. Range: 0-200 Unit: milliseconds " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.2" ::= { hwxdslDynamicProfCfgEntry 14 } hwxdslDynamicProfCh2MinProtectionDsCfg OBJECT-TYPE SYNTAX INTEGER { noProtection (1), halfSymbol (2), singleSymbol (3), twoSymbols (4), threeSymbols (5), fourSymbols (6), fiveSymbols (7), sixSymbols (8), sevenSymbols (9), eightSymbols (10), nineSymbols (11), tenSymbols (12), elevenSymbols (13), twelveSymbols (14), thirteenSymbols (15), fourteenSymbols (16), fifteenSymbols (17), sixteenSymbols (18), invalidValue(-1) } MAX-ACCESS read-create STATUS current DESCRIPTION "Minimum Impulse Noise Protection on Downstream direction. The minimum impulse noise protection for the bearer channel, expressed in symbols. The parameter can take the following values: noProtection (i.e., INP not required), halfSymbol (i.e., INP length is 1/2 symbol) and 1-16 symbols in steps of 1 symbol. Options: 1. noProtection (1) - Indicates that the INP value is 0 2. halfSymbol (2) - Indicates that the INP value is 0.5 3. singleSymbol (3) - Indicates that the INP value is 1 4. twoSymbols (4) - Indicates that the INP value is 2 5. threeSymbols (5) - Indicates that the INP value is 3 6. fourSymbols (6) - Indicates that the INP value is 4 7. fiveSymbols (7) - Indicates that the INP value is 5 8. sixSymbols (8) - Indicates that the INP value is 6 9. sevenSymbols (9) - Indicates that the INP value is 7 10. eightSymbols (10) - Indicates that the INP value is 8 11. nineSymbols (11) - Indicates that the INP value is 9 12. tenSymbols (12) - Indicates that the INP value is 10 13. elevenSymbols (13) - Indicates that the INP value is 11 14. twelveSymbols (14) - Indicates that the INP value is 12 15. thirteenSymbols (15) - Indicates that the INP value is 13 16. fourteenSymbols (16) - Indicates that the INP value is 14 17. fifteenSymbols (17) - Indicates that the INP value is 15 18. sixteenSymbols (18) - Indicates that the INP value is 16 19. invalidValue(-1) - Invalid value " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.3" ::= { hwxdslDynamicProfCfgEntry 15 } hwxdslDynamicProfCh2MinProtectionUsCfg OBJECT-TYPE SYNTAX INTEGER { noProtection (1), halfSymbol (2), singleSymbol (3), twoSymbols (4), threeSymbols (5), fourSymbols (6), fiveSymbols (7), sixSymbols (8), sevenSymbols (9), eightSymbols (10), nineSymbols (11), tenSymbols (12), elevenSymbols (13), twelveSymbols (14), thirteenSymbols (15), fourteenSymbols (16), fifteenSymbols (17), sixteenSymbols (18), invalidValue(-1) } MAX-ACCESS read-create STATUS current DESCRIPTION "Minimum Impulse Noise Protection on Upstream direction. The minimum impulse noise protection for the bearer channel, expressed in symbols. The parameter can take the following values: noProtection (i.e., INP not required), halfSymbol (i.e., INP length is 1/2 symbol) and 1-16 symbols in steps of 1 symbol. Options: 1. noProtection (1) - Indicates that the INP value is 0 2. halfSymbol (2) - Indicates that the INP value is 0.5 3. singleSymbol (3) - Indicates that the INP value is 1 4. twoSymbols (4) - Indicates that the INP value is 2 5. threeSymbols (5) - Indicates that the INP value is 3 6. fourSymbols (6) - Indicates that the INP value is 4 7. fiveSymbols (7) - Indicates that the INP value is 5 8. sixSymbols (8) - Indicates that the INP value is 6 9. sevenSymbols (9) - Indicates that the INP value is 7 10. eightSymbols (10) - Indicates that the INP value is 8 11. nineSymbols (11) - Indicates that the INP value is 9 12. tenSymbols (12) - Indicates that the INP value is 10 13. elevenSymbols (13) - Indicates that the INP value is 11 14. twelveSymbols (14) - Indicates that the INP value is 12 15. thirteenSymbols (15) - Indicates that the INP value is 13 16. fourteenSymbols (16) - Indicates that the INP value is 14 17. fifteenSymbols (17) - Indicates that the INP value is 15 18. sixteenSymbols (18) - Indicates that the INP value is 16 19. invalidValue(-1) - Invalid value " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.3" ::= { hwxdslDynamicProfCfgEntry 16 } hwxdslDynamicProfCh2MaxDelayDsCfg OBJECT-TYPE SYNTAX Unsigned32(0..200) UNITS "milliseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "Maximum Interleave Delay on Downstream direction. The maximum one-way interleaving delay introduced by the PMS-TC on Downstream direction. The XTUs shall choose the S (factor) and D (depth) values such that the actual one-way interleaving delay is as close as possible to, but less than or equal to, hwxdslDynamicProfCh2MaxDelayDs. The delay is coded in ms, with the value 0 indicating no delay bound is being imposed. Range: 0-200 Unit: milliseconds " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.2" ::= { hwxdslDynamicProfCfgEntry 17 } hwxdslDynamicProfCh2MaxDelayUsCfg OBJECT-TYPE SYNTAX Unsigned32(0..200) UNITS "milliseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "Maximum Interleave Delay on Upstream direction. The maximum one-way interleaving delay introduced by the PMS-TC on Upstream direction. The XTUs shall choose the S (factor) and D (depth) values such that the actual one-way interleaving delay is as close as possible to, but less than or equal to, hwxdslDynamicProfCh2MaxDelayUs. The delay is coded in ms, with the value 0 indicating no delay bound is being imposed. Range: 0-200 Unit: milliseconds " REFERENCE "ITU-T G.997.1, paragraph 7.3.2.2" ::= { hwxdslDynamicProfCfgEntry 18 } hwxdslDynamicProfPmModeCfg OBJECT-TYPE SYNTAX BITS { allowTransitionsToIdle(0), allowTransitionsToLowPower(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "Power management state Enabling. Defines the power states the xTU-C or xTU-R may autonomously transition to on this line. The various bit positions are: allowTransitionsToIdle (0) and allowTransitionsToLowPower (1). A bit with a '1' value means that the xTU is allowed to transit into the respective state and a '0' value means that the xTU is not allowed to transit into the respective state. " REFERENCE "ITU-T G.997.1, paragraph 7.3.1.1.4" ::= { hwxdslDynamicProfCfgEntry 19 } hwxdslDynamicProfL0TimeCfg OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "This minimum time (in seconds) between an exit from the L2 state and the next Entry into the L2 state. It ranges from 0 to 255 seconds. Range: 0-255 " REFERENCE "ITU-T G.997.1, paragraph 7.3.1.1.5" ::= { hwxdslDynamicProfCfgEntry 20 } hwxdslDynamicProfL2TimeCfg OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "This minimum time (in seconds) between an entry into the L2 state and the first power trim in the L2 state and between two consecutive power trims in the L2 State. It ranges from 0 to 255 seconds. Range: 0-255 " REFERENCE "ITU-T G.997.1, paragraph 7.3.1.1.6" ::= { hwxdslDynamicProfCfgEntry 21 } hwxdslDynamicProfL2AtprCfg OBJECT-TYPE SYNTAX Unsigned32 (0..31) UNITS "dB" MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum aggregate transmit power reduction (in dB) that can be performed at transition of L0 to L2 state or through a single power trim in the L2 state. It ranges from 0 dB to 31 dB. Range: 0-31 Unit: dB " REFERENCE "ITU-T G.997.1 (amendment 1), 7.3.1.1.7" ::= { hwxdslDynamicProfCfgEntry 22 } hwxdslDynamicProfL2AtprtCfg OBJECT-TYPE SYNTAX Unsigned32 (0..31) UNITS "dB" MAX-ACCESS read-create STATUS current DESCRIPTION "The total maximum aggregate transmit power reduction (in dB) that can be performed in an L2 state. This is the sum of all reductions of L2 Request (i.e., at transition of L0 to L2 state) and power trims. Range: 0-31 Unit: dB " REFERENCE "ITU-T G.997.1 (amendment 1), 7.3.1.1.9" ::= { hwxdslDynamicProfCfgEntry 23 } hwxdslDynamicProfDpboEPsdCfg OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..48)) MAX-ACCESS read-create STATUS current DESCRIPTION "This parameter defines the PSD mask that is assumed to be permitted at the exchange. This parameter shall use the same format as PSDMASKds. The maximum number of breakpoints for DPBOEPSD is 16. This is a string of 16 pairs of values in the following structure: Octets 0+1 - Index of 1st sub-carrier used in the context of a first breakpoint. Octet 2 - The PSD reduction for the sub-carrier indicated in octets 0 and 1. Octets 3-5 - Same, for a 2nd breakpoint. Octets 6-8 - Same, for a 3rd breakpoint. This architecture continues until octets 45-47, which are associated with a 16th breakpoint. Each subcarrier index is an unsigned number in the range 1 and NSCds. Each PSD reduction value is in the range 0 (0dBm/Hz) to 255 (-127.5dBm/Hz) with steps of 0.5dBm/Hz. Valid values are in the range 0 to 190 (0 to -95dBm/Hz). When the number of breakpoints is less than 16, all remaining octets are set to the value 0xff. " REFERENCE "ITU-T G.997.1(200604), paragraph 7.3.1.2.13" ::= { hwxdslDynamicProfCfgEntry 24 } hwxdslDynamicProfDpboEsELCfg OBJECT-TYPE SYNTAX Unsigned32 (0..511) UNITS "0.5dB" MAX-ACCESS read-create STATUS current DESCRIPTION "This configuration parameter defines the assumed electrical length of cables (E-side cables) connecting exchange based DSL services to a remote flexibility point (cabinet), that hosts the xTU-C that is subject to spectrally shaped downstream power back-off depending on this length. For this parameter the electrical length is defined as the loss (in dB) of an equivalent length of hypothetical cable at a reference frequency defined by the network operator or in spectrum management regulations. DPBOESEL shall be coded as an unsigned integer representing an electrical length from 0 dB (coded as 0) to 255.5 dB (coded as 511) in steps of 0.5 dB. All values in the range are valid.If DPBOESEL is set to zero, the DPBO in this section shall be disabled. Range: 0-511 Unit: 0.5dB " REFERENCE "ITU-T G.997.1(200604), paragraph 7.3.1.2.13" ::= { hwxdslDynamicProfCfgEntry 25 } hwxdslDynamicProfDpboEscmCfg OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..6)) MAX-ACCESS read-create STATUS current DESCRIPTION "This configuration parameter defines a cable model in terms of three scalars DPBOESCMA, DPBOESCMB and DPBOESCMC that shall be used to describe the frequency dependent loss of E-side cables.Parameters DPBOESCMA, DPBOESCMB, DPBOESCMC shall be coded as unsigned integers representing a scalar value from -1 (coded as 0) to 1.5 (coded as 640) in step of 1/256. All values in the range are valid. Octets 0+1 DPBOESCMA Octets 2+3 DPBOESCMB Octets 4+5 DPBOESCMC " REFERENCE "ITU-T G.997.1(200604), paragraph 7.3.1.2.13" ::= { hwxdslDynamicProfCfgEntry 26 } hwxdslDynamicProfDpboMusCfg OBJECT-TYPE SYNTAX Unsigned32 (0..255) UNITS "0.5dBm/Hz" MAX-ACCESS read-create STATUS current DESCRIPTION "DPBOMUS defines the assumed Minimum Usable receive Signal PSD (in dBm/Hz) for exchange based services, used to modify parameter DPBOFMAX defined below. It shall be coded as an unsigned integer representing a PSD level from 0 dBm/Hz (coded as 0) to -127.5 dBm/Hz (coded as 255) in steps of 0.5 dBm/Hz. All values in the range are valid. Range: 0-255 Unit: 0.5dBm/Hz " REFERENCE "ITU-T G.997.1(200604), paragraph 7.3.1.2.13" ::= { hwxdslDynamicProfCfgEntry 27 } hwxdslDynamicProfDpboFMinCfg OBJECT-TYPE SYNTAX Unsigned32 (0..2048) UNITS "4.3125 KHz" MAX-ACCESS read-create STATUS current DESCRIPTION "DPBOFMIN defines the minimum frequency from which the DPBO shall be applied. It shall be coded as a 16 bits unsigned integer representing a frequency in multiple of 4.3125 KHz. The range of valid values is from 0 kHz (coded as 0) to 8832 kHz (coded as 2048). Range: 0-2048 Unit: 4.3125 KHz " REFERENCE "ITU-T G.997.1(200604), paragraph 7.3.1.2.13" ::= { hwxdslDynamicProfCfgEntry 28 } hwxdslDynamicProfDpboFMaxCfg OBJECT-TYPE SYNTAX Unsigned32 (32..6956) UNITS "4.3125 KHz" MAX-ACCESS read-create STATUS current DESCRIPTION "DPBOFMAX defines the maximum frequency at which DPBO may be applied. It shall be coded as a 16 bits unsigned integer representing a frequency in multiple of 4.3125 KHz. The range of valid values is from 138 kHz (coded as 32) to 29997.75 kHz (coded as 6956). Range: 32-6956 Unit: 4.3125 KHz " REFERENCE "ITU-T G.997.1(200604), paragraph 7.3.1.2.13" ::= { hwxdslDynamicProfCfgEntry 29 } hwxdslDynamicProfUpboPsdBandCfg OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..16)) MAX-ACCESS read-create STATUS current DESCRIPTION "This parameter defines the UPBO reference PSD used to compute the upstream power back-off for each upstream band except US0. A UPBOPSD defined for each band ahsll consist of two parameters [a, b]. Parameter a shall be coded as an unsigned 12-bit number from 40 dBm/Hz (coded as 0) to 80.95 dBm/Hz (coded as 4095) in steps of 0.01 dBm/Hz; and b shall be coded as an unsigned 12 bit number from 0 (coded as 0) to 40.95 dBm/Hz (coded as 4095) in steps of 0.01 dBm/Hz. The UPBO reference PSD at the frequency f expressed in MHz shall be equal to '-a-b(SQRT(f))'. The set of parameter values a = 40 dBm/Hz, b = 0 dBm/Hz is a special configuration to disable UPBO in the respective upstream band. Octets 0+1 - a[0] Octets 2+3 - b[0] Octets 4+5 - a[1] Octets 6+7 - b[1] Octets 8+9 - a[2] Octets 10+11 - b[2] Octets 12+13 - a[3] Octets 14+15 - b[3]" REFERENCE "ITU-T G.997.1(200604), paragraph 7.3.1.2.14" ::= { hwxdslDynamicProfCfgEntry 30 } hwxdslDynamicProfUpboKLFCfg OBJECT-TYPE SYNTAX INTEGER { forced(1), auto(2), invalidValue(-1) } MAX-ACCESS read-create STATUS current DESCRIPTION "This parameter is a flag that forces the VTU-R to use the electrical loop length of the CO-MIB (UPBOKL) to compute the UPBO. The value shall be forced if the flag is set to 1. Otherwise, the electrical loop length shall be autonomously selected by the VTU-O. Options: 1. forced(1) - Force the CPE to use the electrical length of the CO(UPBOKL) to compute the UPBO 2. auto(2) - Electrical length shall be autonomously selected by the CO 3. invalidValue(-1) - Invalid value " REFERENCE "ITU-T G.997.1(200604), paragraph 7.3.1.2.14" ::= { hwxdslDynamicProfCfgEntry 31 } hwxdslDynamicProfUpboKLCfg OBJECT-TYPE SYNTAX Unsigned32 (0..1280) UNITS "0.1 dB" MAX-ACCESS read-create STATUS current DESCRIPTION "This parameter defines the electrical loop length expressed in dB at 1MHz, kl0, configured by the CO-MIB. The value shall be coded as an unsigned 16 bit number in the range 0 (coded as 0) to 128 dB (coded as 1280) in steps of 0.1 dB. Range: 0-1280 Unit: 0.1 dB " REFERENCE "ITU-T G.997.1(200604), paragraph 7.3.1.2.14" ::= { hwxdslDynamicProfCfgEntry 32 } hwxdslDynamicProfRfiBandsCfg OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..159)) MAX-ACCESS read-create STATUS current DESCRIPTION "The subset of PSD mask breakpoints that shall be used to notch an RFI band. It is a string of bands consist of begin tone index and end tone index. for example :0-10,20-50,100-4095 It can contain as most as 16 bands. " REFERENCE "ITU-T G.997.1(200604), paragraph 7.3.1.2.10" ::= { hwxdslDynamicProfCfgEntry 33 } hwxdslDynamicProfToneBlackOutCfg OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..79)) MAX-ACCESS read-create STATUS current DESCRIPTION "The subset of subcarriermask that shall be used to mask the subcarriers. It is a string of bands consist of begin tone index and end tone index. For example :0-10,20-50,100-4095. It can contain as most as 8 bands. " REFERENCE "ITU-T G.997.1(200604), paragraph 7.3.1.2.8" ::= { hwxdslDynamicProfCfgEntry 34 } hwxdslDynamicProfCarMaskDSCfg OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..64)) MAX-ACCESS read-create STATUS current DESCRIPTION "Sub-carriers mask. A bitmap of 512 bits that allows masking up to 512 downstream sub-carriers, depending on NSCds. If bit i (0 <= i < NSCds) is set to '1', the respective downstream sub-carrier i is masked, and if set to '0', the respective sub-carrier is unmasked. Note that there should always be unmasked sub-carriers (i.e., the object cannot be all 1's). Also note that if NSCds < 512, all bits i (NSCds i <= 512) should be set to '1'. " REFERENCE "ITU-T G.997.1, paragraph 7.3.1.2.6" ::= { hwxdslDynamicProfCfgEntry 35 } hwxdslDynamicProfCarMaskUSCfg OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..8)) MAX-ACCESS read-create STATUS current DESCRIPTION "Sub-carriers mask. A bitmap of 64 bits that allows masking up to 64 downstream sub-carriers, depending on NSCds. If bit i (0 <= i < NSCus) is set to '1', the respective upstream sub-carrier i is masked, and if set to '0', the respective sub-carrier is unmasked. Note that there should always be unmasked sub-carriers (i.e., the object cannot be all 1's). Also note that if NSCus < 64, all bits i (NSCus < i <= 64) should be set to '1'. " REFERENCE "ITU-T G.997.1, paragraph 7.3.1.2.7" ::= { hwxdslDynamicProfCfgEntry 36 } hwxdslDynamicProfXdslModeCfg OBJECT-TYPE SYNTAX INTEGER { defMode (1), adsl (2), adsl2Pots (3), adsl2Isdn (4), adsl2PlusPots (5), adsl2PlusIsdn (6), adsl2ReachExtended (7), g9923PotsNonOverlapped(8), g9923PotsOverlapped(9), g9923IsdnNonOverlapped(10), g9923isdnOverlapped(11), g9924potsNonOverlapped(14), g9924potsOverlapped(15), g9923AnnexIAllDigNonOverlapped(18), g9923AnnexIAllDigOverlapped(19), g9923AnnexJAllDigNonOverlapped(20), g9923AnnexJAllDigOverlapped(21), g9924AnnexIAllDigNonOverlapped(22), g9924AnnexIAllDigOverlapped(23), g9923AnnexLMode1NonOverlapped(24), g9923AnnexLMode2NonOverlapped(25), g9923AnnexLMode3Overlapped(26), g9923AnnexLMode4Overlapped(27), g9923AnnexMPotsNonOverlapped(28), g9923AnnexMPotsOverlapped(29), g9925PotsNonOverlapped(30), g9925PotsOverlapped(31), g9925IsdnNonOverlapped(32), g9925isdnOverlapped(33), g9925AnnexIAllDigNonOverlapped(36), g9925AnnexIAllDigOverlapped(37), g9925AnnexJAllDigNonOverlapped(38), g9925AnnexJAllDigOverlapped(39), g9925AnnexMPotsNonOverlapped(40), g9925AnnexMPotsOverlapped(41), vdsl2Pots (42), vdsl2Isdn (43), invalidValue(-1) } MAX-ACCESS read-create STATUS current DESCRIPTION "The xDSL mode is a way of categorizing the various XDSL transmission modes into groups, each group (XDSL Mode) shares the same PSD configuration. Options: 1. defMode (1) - XDSL transmit mode is defMode 2. adsl (2) - XDSL transmit mode is adsl 3. adsl2Pots (3) - XDSL transmit mode is adsl2Pots 4. adsl2Isdn (4) - XDSL transmit mode is adsl2Isdn 5. adsl2PlusPots (5) - XDSL transmit mode is adsl2PlusPots 6. adsl2PlusIsdn (6) - XDSL transmit mode is adsl2PlusIsdn 7. adsl2ReachExtended (7) - XDSL transmit mode is adsl2ReachExtended 8. g9923PotsNonOverlapped(8) - XDSL transmit mode is g9923PotsNonOverlapped 9. g9923PotsOverlapped(9) - XDSL transmit mode is g9923PotsOverlapped 10. g9923IsdnNonOverlapped(10) - XDSL transmit mode is g9923IsdnNonOverlapped 11. g9923isdnOverlapped(11) - XDSL transmit mode is g9923isdnOverlapped 12. g9924potsNonOverlapped(14) - XDSL transmit mode is g9924potsNonOverlapped 13. g9924potsOverlapped(15) - XDSL transmit mode is g9924potsOverlapped 14. g9923AnnexIAllDigNonOverlapped(18) - XDSL transmit mode is g9923AnnexIAllDigNonOverlapped 15. g9923AnnexIAllDigOverlapped(19) - XDSL transmit mode is g9923AnnexIAllDigOverlapped 16. g9923AnnexJAllDigNonOverlapped(20) - XDSL transmit mode is g9923AnnexJAllDigNonOverlapped 17. g9923AnnexJAllDigOverlapped(21) - XDSL transmit mode is g9923AnnexJAllDigOverlapped 18. g9924AnnexIAllDigNonOverlapped(22) - XDSL transmit mode is g9924AnnexIAllDigNonOverlapped 19. g9924AnnexIAllDigOverlapped(23) - XDSL transmit mode is g9924AnnexIAllDigOverlapped 20. g9923AnnexLMode1NonOverlapped(24) - XDSL transmit mode is g9923AnnexLMode1NonOverlapped 21. g9923AnnexLMode2NonOverlapped(25) - XDSL transmit mode is g9923AnnexLMode2NonOverlapped 22. g9923AnnexLMode3Overlapped(26) - XDSL transmit mode is g9923AnnexLMode3Overlapped 23. g9923AnnexLMode4Overlapped(27) - XDSL transmit mode is g9923AnnexLMode4Overlapped 24. g9923AnnexMPotsNonOverlapped(28) - XDSL transmit mode is g9923AnnexMPotsNonOverlapped 25. g9923AnnexMPotsOverlapped(29) - XDSL transmit mode is g9923AnnexMPotsOverlapped 26. g9925PotsNonOverlapped(30) - XDSL transmit mode is g9925PotsNonOverlapped 27. g9925PotsOverlapped(31) - XDSL transmit mode is g9925PotsOverlapped 28. g9925IsdnNonOverlapped(32) - XDSL transmit mode is g9925IsdnNonOverlapped 29. g9925isdnOverlapped(33) - XDSL transmit mode is g9925isdnOverlapped 30. g9925AnnexIAllDigNonOverlapped(36) - XDSL transmit mode is g9925AnnexIAllDigNonOverlapped 31. g9925AnnexIAllDigOverlapped(37) - XDSL transmit mode is g9925AnnexIAllDigOverlapped 32. g9925AnnexJAllDigNonOverlapped(38) - XDSL transmit mode is g9925AnnexJAllDigNonOverlapped 33. g9925AnnexJAllDigOverlapped(39) - XDSL transmit mode is g9925AnnexJAllDigOverlapped 34. g9925AnnexMPotsNonOverlapped(40) - XDSL transmit mode is g9925AnnexMPotsNonOverlapped 35. g9925AnnexMPotsOverlapped(41) - XDSL transmit mode is g9925AnnexMPotsOverlapped 36. vdsl2Pots (42) - XDSL transmit mode is vdsl2Pots 37. vdsl2Isdn (43) - XDSL transmit mode is vdsl2Isdn 38. invalidValue(-1) - Invalid value " REFERENCE "DSL Forum TR-90, paragraph 5.1.8" ::= { hwxdslDynamicProfCfgEntry 37 } hwxdslDynamicProfMaxNomPsdDsCfg OBJECT-TYPE SYNTAX Integer32(-600..-300 | -1) UNITS "0.1 dB" MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum nominal transmit PSD in the downstream direction during initialization and show time. It ranges from -600 to -300 units of 0.1 dBm/Hz(physical values are -60 to -30 dBm/Hz). The invalid value is -1. If data is invalid, the invalid value will be returned. Unit: 0.1 dB " ::= { hwxdslDynamicProfCfgEntry 38 } hwxdslDynamicProfMaxNomPsdUsCfg OBJECT-TYPE SYNTAX Integer32(-600..-300 | -1) UNITS "0.1 dB" MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum nominal transmit PSD in the upstream direction during initialization and show time. It ranges from -600 to -300 units of 0.1 dBm/Hz(physical values are -60 to -30 dBm/Hz). The invalid value is -1. If data is invalid, the invalid value will be returned. Unit: 0.1 dB " ::= { hwxdslDynamicProfCfgEntry 39 } hwxdslDynamicProfMaxNomAtpDsCfg OBJECT-TYPE SYNTAX Unsigned32 (0..255) UNITS "0.1 dBm" MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum nominal aggregate transmit power in the downstream direction during initialization and show time. It ranges from 0 to 255 units of 0.1 dBm (physical values are 0 to 25.5 dBm). Range: 0-255 Unit: 0.1 dBm " REFERENCE "ITU-T G.997.1, paragraph 7.3.1.2" ::= { hwxdslDynamicProfCfgEntry 40 } hwxdslDynamicProfMaxNomAtpUsCfg OBJECT-TYPE SYNTAX Unsigned32 (0..255) UNITS "0.1 dBm" MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum nominal aggregate transmit power in the upstream direction during initialization and show time. It ranges from 0 to 255 units of 0.1 dBm (physical values are 0 to 25.5 dBm). Range: 0-255 Unit: 0.1 dBm " REFERENCE "ITU-T G.997.1, paragraph 7.3.1.2" ::= { hwxdslDynamicProfCfgEntry 41 } hwxdslDynamicProfPsdMaskDsCfg OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..96)) MAX-ACCESS read-create STATUS current DESCRIPTION "This configuration parameter defines the downstream PSD mask applicable at the U C2 reference point. This MIB PSD mask may impose PSD restrictions in addition to the Limit PSD mask defined in the relevant Recommendation (e.g., G.992.5, G.993.2). This is a string of 32 pairs of values in the following structure: Octets 0+1 - Index of 1st sub-carrier used in the context of a first breakpoint. Octet 2 - The PSD reduction for the sub-carrier indicated in octets 0 and 1. Octets 3-5 - Same, for a 2nd breakpoint. Octets 6-8 - Same, for a 3rd breakpoint. This architecture continues until octets 94-95, which are associated with a 32nd breakpoint. Each subcarrier index is an unsigned number in the range 0 and (NSCds - 1). Each PSD reduction value is in the range 0 (0dBm/Hz) to 255 (-127.5dBm/Hz) with steps of 0.5dBm/Hz. Valid values are in the range 0 to 190 (0 to -95dBm/Hz). When the number of breakpoints is less than 32, all remaining octets are set to the value 0xff. Note that the content of this object should be correlated with the sub-carriers mask and with the RFI setup. " REFERENCE "ITU-T G.997.1(200604), paragraph 7.3.1.2.9" ::= { hwxdslDynamicProfCfgEntry 42 } hwxdslDynamicProfPsdMaskUsCfg OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..48)) MAX-ACCESS read-create STATUS current DESCRIPTION "This configuration parameter defines the upstream PSD mask applicable at the U R2 reference point. This MIB PSD mask may impose PSD restrictions in addition to the Limit PSD mask defined in the relevant Recommendations (e.g., ITU-T Recommendations G.992.3, G.993.2). This is a string of 16 pairs of values in the following structure: Octets 0+1 - Index of 1st sub-carrier used in the context of a first breakpoint. Octet 2 - The PSD reduction for the sub-carrier indicated in octets 0 and 1. Octets 3-5 - Same, for a 2nd breakpoint. Octets 45-47 - Same, for a 3rd breakpoint. This architecture continues until octets 45-47, which are associated with a 16th breakpoint. Each subcarrier index is an unsigned number in the range 0 and (NSCus - 1). Each PSD reduction value is in the range 0 (0dBm/Hz) to 255 (-127.5dBm/Hz) with steps of 0.5dBm/Hz. Valid values are in the range 0 to 190 (0 to -95dBm/Hz). When the number of breakpoints is less than 16, all remaining octets are set to the value 0xff. Note that the content of this object should be correlated with the sub-carriers mask and with the RFI setup. " REFERENCE "ITU-T G.997.1(200604), paragraph 7.3.1.2.12" ::= { hwxdslDynamicProfCfgEntry 43 } hwxdslDynamicProfLimitMaskCfg OBJECT-TYPE SYNTAX INTEGER { profile8a (1), profile8b (2), profile8c (3), profile8d (4), profile12a (5), profile12b (6), profile17a (7), profile30a (8), invalidValue(-1) } MAX-ACCESS read-create STATUS current DESCRIPTION "This configuration parameter contains the G.993.2 profiles to be allowed by the near-end xTU on this line. Options: 1. profile8a (1) - The G.993.2 profile is profile8a 2. profile8b (2) - The G.993.2 profile is profile8b 3. profile8c (3) - The G.993.2 profile is profile8c 4. profile8d (4) - The G.993.2 profile is profile8d 5. profile12a (5) - The G.993.2 profile is profile12a 6. profile12b (6) - The G.993.2 profile is profile12b 7. profile17a (7) - The G.993.2 profile is profile17a 8. profile30a (8) - The G.993.2 profile is profile30a 9. invalidValue(-1) - Invalid value " REFERENCE "ITU-T G.997.1(200604), paragraph 7.3.1.1.11" ::= { hwxdslDynamicProfCfgEntry 44 } hwxdslDynamicProfClassMaskCfg OBJECT-TYPE SYNTAX INTEGER { annexA998-D-32 (1), annexA998-D-64 (2), annexB997-M1c-A-7 (3), annexB997-M1x-M-8 (4), annexB997-M1x-M (5), annexB997-M2x-M-8 (6), annexB997-M2x-A (7), annexB997-M2x-M (8), annexB998-M1x-A (9), annexB998-M1x-B (10), annexB998-M1x-NUS0 (11), annexB998-M2x-A (12), annexB998-M2x-M (13), annexB998-M2x-B (14), annexB998-M2x-NUS0 (15), annexBHPE17-M1 (16), annexBHPE30-M1 (17), annexB997E17-M2x-A (18), annexB997E30-M2x-NUS0 (19), annexB998E17-M2x-NUS0 (20), annexB998E17-M2x-NUS0-M (21), annexB998ADE17-M2x-NUS0-M (22), annexB998ADE17-M2x-B (23), annexB998E30-M2x-NUS0 (24), annexB998E30-M2x-NUS0-M (25), annexB998ADE30-M2x-NUS0-M (26), annexB998ADE17-M2x-A (27), annexB998ADE30-M2x-NUS0-A (28), annexA998-D-48 (29), annexA998-D-128 (30), annexB998ADE17-M2x-M (31), invalidValue(-1) } MAX-ACCESS read-create STATUS current DESCRIPTION "In order to reduce the number of configuration possibilities, the limit PSD masks are grouped in the following PSD mask classes: Options: 1. annexA998-D-32(1) - Class 998 Annex A: D-32, D-64, D-48, D-128 2. annexA998-D-64(2) - Class 998 Annex A: D-32, D-64, D-48, D-128 3. annexB997-M1c-A-7(3) - Class 997-M1c Annex B: 997-M1c-A-7 4. annexB997-M1x-M-8(4) - Class 997-M1x Annex B: 997-M1x-M-8, 997-M1x-M 5. annexB997-M1x-M(5) - Class 997-M1x Annex B: 997-M1x-M-8, 997-M1x-M 6. annexB997-M2x-M-8(6) - Class 997-M2x Annex B: 997-M2x-M-8, 997-M2x-A, 997-M2x-M 7. annexB997-M2x-A(7) - Class 997-M2x Annex B: 997-M2x-M-8, 997-M2x-A, 997-M2x-M 8. annexB997-M2x-M(8) - Class 997-M2x Annex B: 997-M2x-M-8, 997-M2x-A, 997-M2x-M 9. annexB998-M1x-A(9) - Class 998-M1x Annex B: 998-M1x-A, 998-M1x-B, 998-M1x-NUS0 10. annexB998-M1x-B(10) - Class 998-M1x Annex B: 998-M1x-A, 998-M1x-B, 998-M1x-NUS0 11. annexB998-M1x-NUS0(11) - Class 998-M1x Annex B: 998-M1x-A, 998-M1x-B, 998-M1x-NUS0 12. annexB998-M2x-A(12) - Class 998-M2x Annex B: 998-M2x-A, 998-M2x-M, 998-M2x-B, 998-M2x-NUS0 13. annexB998-M2x-M(13) - Class 998-M2x Annex B: 998-M2x-A, 998-M2x-M, 998-M2x-B, 998-M2x-NUS0 14. annexB998-M2x-B(14) - Class 998-M2x Annex B: 998-M2x-A, 998-M2x-M, 998-M2x-B, 998-M2x-NUS0 15. annexB998-M2x-NUS0(15) - Class 998-M2x Annex B: 998-M2x-A, 998-M2x-M, 998-M2x-B, 998-M2x-NUS0 16. annexBHPE17-M1(16) - Class HPE17 Annex B: HPE17-M1 17. annexBHPE30-M1(17) - Class HPE30 Annex B: HPE30-M1 18. annexB997E17-M2x-A(18) - Class 997E17-M2x Annex B: 997E17-M2x-A 19. annexB997E30-M2x-NUS0(19) - Class 997E30-M2x Annex B: 997E30-M2x-NUS0 20. annexB998E17-M2x-NUS0(20) - Class 998E17-M2x Annex B: 998E17-M2x-NUS0, 998E17-M2x-NUS0-M 21. annexB998E17-M2x-NUS0-M(21) - Class 998E17-M2x Annex B: 998E17-M2x-NUS0, 998E17-M2x-NUS0-M 22. annexB998ADE17-M2x-NUS0-M(22) - Class 998ADE17-M2x Annex B: 998ADE17-M2x-NUS0-M, 998ADE17-M2x-A, 998ADE17-M2x-B, 998ADE17-M2x-M. 23. annexB998ADE17-M2x-B(23) - Class 998ADE17-M2x Annex B: 998ADE17-M2x-NUS0-M, 998ADE17-M2x-A, 998ADE17-M2x-B, 998ADE17-M2x-M. 24. annexB998E30-M2x-NUS0(24) - Class 998E30-M2x Annex B: 998E30-M2x-NUS0, 998E30-M2x-NUS0-M 25. annexB998E30-M2x-NUS0-M(25) - Class 998E30-M2x Annex B: 998E30-M2x-NUS0, 998E30-M2x-NUS0-M 26. annexB998ADE30-M2x-NUS0-M(26) - Class 998ADE30-M2x Annex B: 998ADE30-M2x-NUS0-M, 998ADE30-M2x-NUS0-A 27. annexB998ADE17-M2x-A(27) - Class 998ADE17-M2x Annex B: 998ADE17-M2x-NUS0-M, 998ADE17-M2x-A, 998ADE17-M2x-B, 998ADE17-M2x-M. 28. annexB998ADE30-M2x-NUS0-A(28) - Class 998ADE30-M2x Annex B: 998ADE30-M2x-NUS0-M, 998ADE30-M2x-NUS0-A 29. annexA998-D-48(29) - Class 998 Annex A: D-32, D-64, D-48, D-128 30. annexA998-D-128(30) - Class 998 Annex A: D-32, D-64, D-48, D-128 31. annexB998ADE17-M2x-M(31) - Class 998ADE17-M2x Annex B: 998ADE17-M2x-NUS0-M, 998ADE17-M2x-A, 998ADE17-M2x-B, 998ADE17-M2x-M. 32. invalidValue(-1) - Invalid value " REFERENCE "ITU-T G.997.1(200604), paragraph 7.3.1.1.12" ::= { hwxdslDynamicProfCfgEntry 45 } hwxdslDynamicProfBandOptUsageCfg OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2), invalidValue(-1) } MAX-ACCESS read-create STATUS current DESCRIPTION "Defines the VDSL link use of the optional frequency range [25kHz - 138kHz] (Opt). Options: 1. disable(1) - Indicates Opt is unused 2. enable(2) - Indicates Opt usage is for upstream 3. invalidValue(-1) - Invalid value Huawei defined. " ::= { hwxdslDynamicProfCfgEntry 46 } hwxdslDynamicProfVirtualNoiseModeDsCfg OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2), invalidValue(-1) } MAX-ACCESS read-create STATUS current DESCRIPTION "Defines the Virtual Noise of downsteam. Options: 1. disable(1) -unused 2. enable(2) -used 3. invalidValue(-1) -invalid Value Huawei defined. " ::= { hwxdslDynamicProfCfgEntry 47 } hwxdslDynamicProfVirtualNoiseModeUsCfg OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2), invalidValue(-1) } MAX-ACCESS read-create STATUS current DESCRIPTION "Defines the Virtual Noise of upstream. Options: 1. disable(1) -unused 2. enable(2) -used 3. invalidValue(-1) -invalid Value Huawei defined. " ::= { hwxdslDynamicProfCfgEntry 48 } hwxdslDynamicProfVirtualNoiseDsCfg OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..96)) MAX-ACCESS read-create STATUS current DESCRIPTION "The Virtual Noise of downsteam. This is a string of 32 pairs of values in the following structure: Octets 0+1 - Index of 1st sub-carrier used in the context of a first breakpoint. Octet 2 - The PSD reduction for the sub-carrier indicated in octets 0 and 1. Octets 3-5 - Same, for a 2nd breakpoint. Octets 6-8 - Same, for a 3rd breakpoint. This architecture continues until octets 94-95, which are associated with a 32nd breakpoint. Each subcarrier index is an unsigned number in the range 0 and (NSCds - 1). Each PSD reduction value is in the range 0 (0dBm/Hz) to 255 (127.5dBm/Hz) with steps of 0.5dBm/Hz. " ::= { hwxdslDynamicProfCfgEntry 49 } hwxdslDynamicProfVirtualNoiseUsCfg OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..48)) MAX-ACCESS read-create STATUS current DESCRIPTION "The Virtual Noise of upsteam. This is a string of 16 pairs of values in the following structure: Octets 0+1 - Index of 1st sub-carrier used in the context of a first breakpoint. Octet 2 - The PSD reduction for the sub-carrier indicated in octets 0 and 1. Octets 3-5 - Same, for a 2nd breakpoint. Octets 6-8 - Same, for a 3rd breakpoint. This architecture continues until octets 45-47, which are associated with a 16th breakpoint. Each subcarrier index is an unsigned number in the range 0 and (NSCds - 1). Each PSD reduction value is in the range 0 (0dBm/Hz) to 255 (127.5dBm/Hz) with steps of 0.5dBm/Hz. " ::= { hwxdslDynamicProfCfgEntry 50 } hwxdslDynamicProfRowStatusCfg OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. When 'active' is set, the system will validate the profile. Before a profile can be deleted or taken out of service (by setting this object to 'destroy' or 'outOfService'), it must be first unreferenced from all associated templates. " ::= { hwxdslDynamicProfCfgEntry 51 } --hwXdslPortIopCaptureTable hwXdslPortIopCaptureInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF HwXdslPortIopCaptureInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table hwXdslPortIopCaptureInfoTable implement xDSL port IOP information capture. The index of this table is ifIndex. " ::= { hwAdslMibObjects 31 } hwXdslPortIopCaptureInfoEntry OBJECT-TYPE SYNTAX HwXdslPortIopCaptureInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table hwXdslPortIopCaptureInfoTable implement xDSL port IOP information capture. The index of this entry is ifIndex. " INDEX{ ifIndex } ::= { hwXdslPortIopCaptureInfoTable 1 } HwXdslPortIopCaptureInfoEntry ::= SEQUENCE{ hwXdslPortIopCaptureOperTypeCfg INTEGER, hwXdslPortIopCaptureOperStatusInfo INTEGER } hwXdslPortIopCaptureOperTypeCfg OBJECT-TYPE SYNTAX INTEGER { start(1), stop(2), invalid(-1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Start or stop IOP information capture of xDSL port. Options: 1. start(1) - Start IOP information capture of xDSL port 2. stop(2) - Stop IOP information capture of xDSL port 3. invalid(-1) - Invalid value " ::= { hwXdslPortIopCaptureInfoEntry 1 } hwXdslPortIopCaptureOperStatusInfo OBJECT-TYPE SYNTAX INTEGER { noCapture(1), capturing(2), iop-generate(3), captured(4), invalid(-1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Port IOP capture status Options: 1. noCapture(1) - Indicates that the capture is not performed 2. capturing(2) - Indicates that the capture is being performed 3. iop-generate(3) - Indicates that the IOP file is generated 4. captured(4) - Indicates that the capture is completed 5. invalid(-1) - Invalid value " ::= { hwXdslPortIopCaptureInfoEntry 2 } --hwXdslDynamicInfoCollectInfoTable hwXdslDynamicInfoCollectInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF HwXdslDynamicInfoCollectInfoEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "The table hwXdslDynamicInfoCollectTable implement xDSL port Dynamic information collect. The indexes of this table are hwFrameIndex and hwSlotIndex. " ::= { hwAdslMibObjects 32 } hwXdslDynamicInfoCollectInfoEntry OBJECT-TYPE SYNTAX HwXdslDynamicInfoCollectInfoEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "The table hwXdslDynamicInfoCollectTable implement xDSL port Dynamic information collect. The indexes of this entry are hwFrameIndex and hwSlotIndex. " INDEX{ hwFrameIndex, hwSlotIndex } ::= { hwXdslDynamicInfoCollectInfoTable 1 } HwXdslDynamicInfoCollectInfoEntry ::= SEQUENCE{ hwXdslDynamicInfoCollectInfo INTEGER, hwXdslDynamicInfoCollectStatusInfo INTEGER, hwXdslDynamicInfoCollectTimeInfo DateAndTime, hwXdslDynamicInfoCollectPortList OCTET STRING } hwXdslDynamicInfoCollectInfo OBJECT-TYPE SYNTAX INTEGER { start(1), invalid(-1) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Start Dynamic information collecting of xDSL port. Options: 1. start(1) - Indicates the collecting starts 2. invalid(-1) - Invalid value " ::= { hwXdslDynamicInfoCollectInfoEntry 1 } hwXdslDynamicInfoCollectStatusInfo OBJECT-TYPE SYNTAX INTEGER { noCollect(1), collecting(2), collected(3) } MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Board Dynamic information collecting status. Options: 1. noCollect(1) - Indicates that collecting data is not performed 2. collecting(2) - Indicates that collecting data is being performed 3. collected(3) - Indicates that collecting data is complete " ::= { hwXdslDynamicInfoCollectInfoEntry 2 } hwXdslDynamicInfoCollectTimeInfo OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Time at which collecting the optimization information is complete." ::= { hwXdslDynamicInfoCollectInfoEntry 3 } hwXdslDynamicInfoCollectPortList OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..16)) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This object defines the operating port list of certain xDSL board. Each bit of this string specifies a port. If that bit has a value of '1', then that port is included in the set of ports; the port is not included if its bit has a value of '0'. For example, if 0xFE is set to this node, then port 0 to port 6 will start collection. If this node is not configed, collection will be started on all ports of the board. " ::= { hwXdslDynamicInfoCollectInfoEntry 4 } -- hwadslAturPerfDataInfoTable hwadslAturPerfDataInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF HwadslAturPerfDataInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides one row for each ATUR. ADSL physical interfaces are those ifEntries where ifType is equal to adsl(94). The index of this table is ifIndex. " ::= { hwAdslMibObjects 33 } hwadslAturPerfDataInfoEntry OBJECT-TYPE SYNTAX HwadslAturPerfDataInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides one row for each ATUR. ADSL physical interfaces are those ifEntries where ifType is equal to adsl(94). The index of this entry is ifIndex. " INDEX { ifIndex } ::= { hwadslAturPerfDataInfoTable 1 } HwadslAturPerfDataInfoEntry ::= SEQUENCE { hwAdslAturPerfCurr15MStartTime DateAndTime, hwAdslAturPerfCurr1DayStartTime DateAndTime, hwAdslAturPerfCurr15MInmainpeq OCTET STRING, hwAdslAturPerfCurr15MInmame Counter32, hwAdslAturPerfCurr15MInmaiat OCTET STRING, hwAdslAturPerfCurr1DayInmainpeq OCTET STRING, hwAdslAturPerfCurr1DayInmame Counter32, hwAdslAturPerfCurr1DayInmaiat OCTET STRING, hwAdslAturPerfPre1DayInmainpeq OCTET STRING, hwAdslAturPerfPre1DayInmame Counter32, hwAdslAturPerfPre1DayInmaiat OCTET STRING, hwAdslAturPerfCurrEverBeforeInmainpeq OCTET STRING, hwAdslAturPerfCurrEverBeforeInmame Counter32, hwAdslAturPerfCurrEverBeforeInmaiat OCTET STRING, hwAdslAturPerfCurr15MLeftrs Counter32, hwAdslAturPerfCurr15MEfb Counter32, hwAdslAturPerfCurr15MMinEftr Counter32, hwAdslAturPerfCurr1DayLeftrs Counter32, hwAdslAturPerfCurr1DayEfb Counter32, hwAdslAturPerfCurr1DayMinEftr Counter32, hwAdslAturPerfPrev1DayLeftrs Counter32, hwAdslAturPerfPrev1DayEfb Counter32, hwAdslAturPerfPrev1DayMinEftr Counter32, hwAdslAturPerfCurrEverBeforeLeftrs Counter32, hwAdslAturPerfCurrEverBeforeEfb Counter32, hwAdslAturPerfCurrEverBeforeMinEftr Counter32 } hwAdslAturPerfCurr15MStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Start time of the current 15-minute performance statistics." ::= { hwadslAturPerfDataInfoEntry 1 } hwAdslAturPerfCurr1DayStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Start time of the current 1-day performance statistics." ::= { hwadslAturPerfDataInfoEntry 2 } hwAdslAturPerfCurr15MInmainpeq OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..68)) MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is a count of the INMAINPEQi anomalies occurring on the line during current 15 minutes. Each INMAINPEQ needs 4 bytes. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { hwadslAturPerfDataInfoEntry 3 } hwAdslAturPerfCurr15MInmame OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is a count of the INMAME anomalies occurring on the line during current 15 minutes. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { hwadslAturPerfDataInfoEntry 4 } hwAdslAturPerfCurr15MInmaiat OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is a count of the INMAIATi anomalies occurring on the line during current 15 minutes. Each INMAIAT needs 4 bytes. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { hwadslAturPerfDataInfoEntry 5 } hwAdslAturPerfCurr1DayInmainpeq OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..68)) MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is a count of the INMAINPEQi anomalies occurring on the line during current 1 day. Each INMAINPEQ needs 4 bytes. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { hwadslAturPerfDataInfoEntry 6 } hwAdslAturPerfCurr1DayInmame OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is a count of the INMAME anomalies occurring on the line during current 1 day. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { hwadslAturPerfDataInfoEntry 7 } hwAdslAturPerfCurr1DayInmaiat OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is a count of the INMAIATi anomalies occurring on the line during current 1 day. Each INMAIAT needs 4 bytes. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { hwadslAturPerfDataInfoEntry 8 } hwAdslAturPerfPre1DayInmainpeq OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..68)) MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is a count of the INMAINPEQi anomalies occurring on the line during the most recent previous 1-day period. Each INMAINPEQ needs 4 bytes. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { hwadslAturPerfDataInfoEntry 9 } hwAdslAturPerfPre1DayInmame OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is a count of the INMAME anomalies occurring on the line during the most recent previous 1-day period. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { hwadslAturPerfDataInfoEntry 10 } hwAdslAturPerfPre1DayInmaiat OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is a count of the INMAIATi anomalies occurring on the line during the most recent previous 1-day period. Each INMAIAT needs 4 bytes. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { hwadslAturPerfDataInfoEntry 11 } hwAdslAturPerfCurrEverBeforeInmainpeq OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..68)) MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is a count of the INMAINPEQi anomalies occurring on the line ever before. Each INMAINPEQ needs 4 bytes. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { hwadslAturPerfDataInfoEntry 12 } hwAdslAturPerfCurrEverBeforeInmame OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is a count of the INMAME anomalies occurring on the line ever before. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { hwadslAturPerfDataInfoEntry 13 } hwAdslAturPerfCurrEverBeforeInmaiat OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is a count of the INMAIATi anomalies occurring on the line ever before. Each INMAIAT needs 4 bytes. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { hwadslAturPerfDataInfoEntry 14 } hwAdslAturPerfCurr15MLeftrs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "If retransmission is used in a given transmit direction, this parameter is a count of the seconds with a far-end leftr defect present observed over the current 15 minutes accumulation period. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1.1.6 7.2.1.2.6 " ::= { hwadslAturPerfDataInfoEntry 15 } hwAdslAturPerfCurr15MEfb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "If retransmission is used in a given transmit direction, this parameter is a count of the number of error-free bits observed over the current 15 minutes accumulation period. The far-end counter is only defined in downstream. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1.1.7 7.2.1.2.7 " ::= { hwadslAturPerfDataInfoEntry 16 } hwAdslAturPerfCurr15MMinEftr OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "If retransmission is used in a given transmit direction, this parameter MINEFTR reports the minimum of the EFTR(Error-free throughput rate) observed over the current 15 minutes accumulation period. The far-end value is only defined in downstream. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1.1.8 7.2.1.2.8 " ::= { hwadslAturPerfDataInfoEntry 17 } hwAdslAturPerfCurr1DayLeftrs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "If retransmission is used in a given transmit direction, this parameter is a count of the seconds with a far-end leftr defect present observed over the current 24 hours accumulation period. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1.1.6 7.2.1.2.6 " ::= { hwadslAturPerfDataInfoEntry 18 } hwAdslAturPerfCurr1DayEfb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "If retransmission is used in a given transmit direction, this parameter is a count of the number of error-free bits current observed over the current 24 hours accumulation period. The far-end counter is only defined in downstream. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1.1.7 7.2.1.2.7 " ::= { hwadslAturPerfDataInfoEntry 19 } hwAdslAturPerfCurr1DayMinEftr OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "If retransmission is used in a given transmit direction, this parameter MINEFTR reports the minimum of the EFTR(Error-free throughput rate) observed over the current 24 hours accumulation period. The far-end value is only defined in downstream. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1.1.8 7.2.1.2.8 " ::= { hwadslAturPerfDataInfoEntry 20 } hwAdslAturPerfPrev1DayLeftrs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "If retransmission is used in a given transmit direction, this parameter is a count of the seconds with a far-end leftr defect present over the previous 24 hours accumulation period during this interval. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1.1.6 7.2.1.2.6 " ::= { hwadslAturPerfDataInfoEntry 21 } hwAdslAturPerfPrev1DayEfb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "If retransmission is used in a given transmit direction, this parameter is a count of the number of error-free bits observed over the previous 24 hours accumulation period during this interval. The far-end counter is only defined in downstream. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1.1.7 7.2.1.2.7 " ::= { hwadslAturPerfDataInfoEntry 22 } hwAdslAturPerfPrev1DayMinEftr OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "If retransmission is used in a given transmit direction, this parameter MINEFTR reports the minimum of the EFTR(Error-free throughput rate) observed over the previous 24 hours accumulation period during this interval. The far-end value is only defined in downstream. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1.1.8 7.2.1.2.8 " ::= { hwadslAturPerfDataInfoEntry 23 } hwAdslAturPerfCurrEverBeforeLeftrs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "If retransmission is used in a given transmit direction, this parameter is a count of the seconds with a far-end leftr defect present observed ever before. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1.1.6 7.2.1.2.6 " ::= { hwadslAturPerfDataInfoEntry 24 } hwAdslAturPerfCurrEverBeforeEfb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "If retransmission is used in a given transmit direction, this parameter is a count of the number of error-free bits observed ever before. The far-end counter is only defined in downstream. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1.1.7 7.2.1.2.7 " ::= { hwadslAturPerfDataInfoEntry 25 } hwAdslAturPerfCurrEverBeforeMinEftr OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "If retransmission is used in a given transmit direction, this parameter MINEFTR reports the minimum of the EFTR(Error-free throughput rate) observed ever before. The far-end value is only defined in downstream. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1.1.8 7.2.1.2.8 " ::= { hwadslAturPerfDataInfoEntry 26 } -- hwadslAturIntervalInfoTable hwadslAturIntervalInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF HwadslAturIntervalInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides one row for each Atur performance data collection interval. ADSL physical interfaces are those ifEntries where ifType is equal to adsl(94). The indexes of this table are ifIndex and adslAturIntervalNumber. " ::= { hwAdslMibObjects 34 } hwadslAturIntervalInfoEntry OBJECT-TYPE SYNTAX HwadslAturIntervalInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides one row for each Atur performance data collection interval. ADSL physical interfaces are those ifEntries where ifType is equal to adsl(94). The indexes of this entry are ifIndex and adslAturIntervalNumber. " INDEX { ifIndex, adslAturIntervalNumber } ::= { hwadslAturIntervalInfoTable 1 } HwadslAturIntervalInfoEntry ::= SEQUENCE { hwAdslAturIntervalStartTime DateAndTime, hwAdslAturIntervalInmainpeq OCTET STRING, hwAdslAturIntervalInmame Counter32, hwAdslAturIntervalInmaiat OCTET STRING, hwAdslAturIntervalLeftrs Counter32, hwAdslAturIntervalEfb Counter32, hwAdslAturIntervalMinEftr Counter32 } hwAdslAturIntervalStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Start time of the historical 15-minute performance statistics." ::= { hwadslAturIntervalInfoEntry 1 } hwAdslAturIntervalInmainpeq OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..68)) MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is a count of the INMAINPEQi anomalies occurring on the line at 15 minutes interval. Each INMAINPEQ needs 4 bytes. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { hwadslAturIntervalInfoEntry 2 } hwAdslAturIntervalInmame OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is a count of the INMAME anomalies occurring on the line at 15 minutes interval. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { hwadslAturIntervalInfoEntry 3 } hwAdslAturIntervalInmaiat OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is a count of the INMAIATi anomalies occurring on the line at 15 minutes interval. Each INMAIAT needs 4 bytes. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1" ::= { hwadslAturIntervalInfoEntry 4 } hwAdslAturIntervalLeftrs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "If retransmission is used in a given transmit direction, this parameter is a count of the seconds with a far-end leftr defect present observed over the previous 15 minutes accumulation period during the interval. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1.1.6 7.2.1.2.6" ::= { hwadslAturIntervalInfoEntry 5 } hwAdslAturIntervalEfb OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "If retransmission is used in a given transmit direction, this parameter is a count of the number of error-free bits observed over the previous 15 minutes accumulation period during the interval. The far-end counter is only defined in downstream. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1.1.6 7.2.1.2.7" ::= { hwadslAturIntervalInfoEntry 6 } hwAdslAturIntervalMinEftr OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "If retransmission is used in a given transmit direction, this parameter MINEFTR reports the minimum of the EFTR(Error-free throughput rate) observed over the 15 minutes accumulation period during the interval. The far-end value is only defined in downstream. " REFERENCE "ITU-T G.997.1, paragraph 7.2.1.1.6 7.2.1.2.8" ::= { hwadslAturIntervalInfoEntry 7 } --ADSL traps description hwAdslTrapsVbOids OBJECT IDENTIFIER ::= { hwAdsl 3 } hwadslPMThresholdItem OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..1024)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Indicates the threshold item." ::= { hwAdslTrapsVbOids 0 } hwadslChipsetID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The chipset id of the board." ::= { hwAdslTrapsVbOids 1 } hwAdslRequestID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "RequestID." ::= { hwAdslTrapsVbOids 2 } hwadslSeltTestStartResult OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "ADSL selt test start result. Options: 1. normal - A message is returned indicating that the SELT is successful. 2. failed - A message is returned indicating that the SELT fails." ::= { hwAdslTrapsVbOids 3 } hwADSLProfOperType OBJECT-TYPE SYNTAX INTEGER { add(1), modify(2), delete(3) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "ADSL profile operate type. Options: 1.add(1) - Add an ADSL profile 2.modify(2) - Modify an ADSL profile 3.delete(3) - Delete an ADSL profile " ::= { hwAdslTrapsVbOids 4 } hwadslLinePMThresholdValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Indicate the threshold value of threshold item." ::= { hwAdslTrapsVbOids 5 } hwadslLinePMCurrentValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Indicate the current value of threshold item." ::= { hwAdslTrapsVbOids 6 } hwAdslExtTraps OBJECT IDENTIFIER ::= { hwAdsl 2 } hwAdslCommonTraps OBJECT IDENTIFIER ::= { hwAdslExtTraps 1 } hwAdslCommonTrapsPrefix OBJECT IDENTIFIER ::= { hwAdslCommonTraps 0 } hwAdslPortActRateMonitorInfoTrap NOTIFICATION-TYPE OBJECTS { hwFrameIndex, hwSlotIndex, hwPortIndex, hwAdslAtucLatestTxRateInfo, hwAdslAturLatestTxRateInfo, hwAdslAtucLatestTxRateThresholdInfo, hwAdslAturLatestTxRateThresholdInfo, hwAdslLineLatestActiveTimeInfo, hwAdslAtucLatestSnrMgnInfo, hwAdslAturLatestSnrMgnInfo, hwAdslAtucLatestAtnInfo, hwAdslAturLatestAtnInfo, hwAdslAtucLatestAttainableRateInfo, hwAdslAturLatestAttainableRateInfo, hwAdslAtucLatestConfTxRateInfo, hwAdslAturLatestConfTxRateInfo, hwAdslAtucLatestInterleaveDelayInfo, hwAdslAturLatestInterleaveDelayInfo, hwAdslAtucLatestTargetSnrMgnInfo, hwAdslAturLatestTargetSnrMgnInfo, hwSubslotIndex, hwAlarmId, hwAlarmTime, hwAlarmSn, hwCauseId, hwTrapType } STATUS current DESCRIPTION "If ADSL act rate is lower than threshold, hwTrapType is 1. Otherwise, hwTrapType is 2. This trap message is generated when the ADSL port rate fails to meet the requirement. " ::= { hwAdslCommonTraps 0 1 } hwAdslPortRateChangeInfoTrap NOTIFICATION-TYPE OBJECTS { hwFrameIndex, hwSlotIndex, hwPortIndex, hwIasConfigChangeTrapID, hwAdslPortRateChangeTrapIPIAIDInfo, hwAdslPortRateChangeTrapMUXIDInfo, hwAdslPortRateChangeTrapTimeStampInfo, hwAdslPortRateChangeTrapDSLineRateInfo, hwAdslPortRateChangeTrapUSLineRateInfo, hwAdslPortRateChangeTrapEventTypeInfo, hwAdslPortRateChangeTrapDslTypeInfo } STATUS current DESCRIPTION "ADSL act rate is change trap. This trap message is generated when the ADSL port rate changed. " ::= { hwAdslCommonTraps 0 2 } hwAdslDynamicCollectInfoTrap NOTIFICATION-TYPE OBJECTS { hwXdslDynamicInfoCollectStatusInfo, hwFrameIndex, hwSlotIndex, hwXdslDynamicInfoCollectTimeInfo } STATUS current DESCRIPTION "XDSL dynamic collect trap. This trap message is generated when xDSL port Dynamic information collect. " ::= { hwAdslCommonTraps 0 3 } hwAdslDeltOperResultInfoTrap NOTIFICATION-TYPE OBJECTS { hwBTSSAdslDeltTestOperResult, hwAdslRequestID, ifIndex } STATUS current DESCRIPTION "ADSL delt trap. This trap message is generated when the ADSL port delt test finish. " ::= { hwAdslCommonTraps 0 4 } hwAdslPortStatusChangeInfoTrap NOTIFICATION-TYPE OBJECTS { hwFrameIndex, hwSlotIndex, hwPortIndex, hwPortOperStatus, hwPortPrimaryStatus, hwPortSecondaryStatus } STATUS current DESCRIPTION "ADSL port status change trap. This trap message is generated when the ADSL port status changed. " ::= { hwAdslCommonTraps 0 5 } hwAdslSeltStartResultTrap NOTIFICATION-TYPE OBJECTS { hwadslSeltTestStartResult, hwAdslRequestID } STATUS current DESCRIPTION "ADSL selt test start trap. This trap message is generated when the ADSL port selt test finish. " ::= { hwAdslCommonTraps 0 6 } hwADSLLineProfChangeTrap NOTIFICATION-TYPE OBJECTS { hwConfigChangeIP, hwADSLProfOperType, adslLineConfProfileName, adslAtucConfRateMode, adslConfProfileLineType, adslAtucConfTargetSnrMgn, adslAtucConfMaxSnrMgn, adslAtucConfMinSnrMgn, adslAtucConfDownshiftSnrMgn, adslAtucConfUpshiftSnrMgn, adslAtucConfMinUpshiftTime, adslAtucConfMinDownshiftTime, adslAtucChanConfFastMinTxRate, adslAtucChanConfInterleaveMinTxRate, adslAtucChanConfFastMaxTxRate, adslAtucChanConfInterleaveMaxTxRate, adslAtucChanConfMaxInterleaveDelay, adslAturConfTargetSnrMgn, adslAturConfMaxSnrMgn, adslAturConfMinSnrMgn, adslAturConfDownshiftSnrMgn, adslAturConfUpshiftSnrMgn, adslAturConfMinUpshiftTime, adslAturConfMinDownshiftTime, adslAturChanConfFastMinTxRate, adslAturChanConfInterleaveMinTxRate, adslAturChanConfFastMaxTxRate, adslAturChanConfInterleaveMaxTxRate, adslAturChanConfMaxInterleaveDelay, hwAdslAtucConfDownBitSwap, hwAdslAtucConfUpBitSwap, hwAdslTrellionsModeEnable, hwAdslTransmissionModeCfg, adslConfProfileLineType } STATUS current DESCRIPTION "ADSL line profile change trap. This trap message is generated when the ADSL line profile changed. " ::= { hwAdslCommonTraps 0 7 } hwADSLAlarmProfChangeTrap NOTIFICATION-TYPE OBJECTS { hwConfigChangeIP, hwADSLProfOperType, adslLineAlarmConfProfileName, adslAtucThresh15MinLofs, adslAtucThresh15MinLoss, adslAtucThresh15MinLols, adslAtucThresh15MinLprs, adslAtucThresh15MinESs, adslAtucThreshFastRateUp, adslAtucThreshInterleaveRateUp, adslAtucThreshFastRateDown, adslAtucThreshInterleaveRateDown, adslAtucInitFailureTrapEnable, adslAturThresh15MinLofs, adslAturThresh15MinLoss, adslAturThresh15MinLprs, adslAturThresh15MinESs, adslAturThreshFastRateUp, adslAturThreshInterleaveRateUp, adslAturThreshFastRateDown, adslAturThreshInterleaveRateDown, adslLineAlarmConfProfileRowStatus, adslAtucThreshold15MinFailedFastR, adslAtucThreshold15MinSesL, adslAtucThreshold15MinUasL, adslAturThreshold15MinSesL, adslAturThreshold15MinUasL, hwadslLineAlarmConfProfileDyingGaspCfg, hwadslLineAlarmConfProfXturThresh15MinLeftrs, hwAdslLineAlarmConfProfileActiveFailAlarmSwitch } STATUS current DESCRIPTION "ADSL alarm profile change trap. This trap message is generated when the ADSL alarm profile changed. " ::= { hwAdslCommonTraps 0 8 } hwADSLExtLineProfChangeTrap NOTIFICATION-TYPE OBJECTS { hwConfigChangeIP, hwADSLProfOperType, hwadslLineExtConfProfileNameCfg } STATUS current DESCRIPTION "ADSL extended line profile change trap. This trap message is generated when the ADSL extended line profile changed. " ::= { hwAdslCommonTraps 0 9 } -- Alarm Trap hwAdslAlarmTraps OBJECT IDENTIFIER ::= { hwAdslExtTraps 2 } hwAdslAlarmTrapsPrefix OBJECT IDENTIFIER ::= { hwAdslAlarmTraps 0 } hwAdslPortActRateFailThresholdAlarmTrap NOTIFICATION-TYPE OBJECTS { hwFrameIndex, hwSlotIndex, hwPortIndex } STATUS current DESCRIPTION "This trap message is generated when the ADSL port activation rate fails to reach the rate threshold. " ::= { hwAdslAlarmTraps 0 1 } hwAdslPortActRateReachThresholdAlarmTrap NOTIFICATION-TYPE OBJECTS { hwFrameIndex, hwSlotIndex, hwPortIndex } STATUS current DESCRIPTION "This trap message is generated when the ADSL port activation rate succeeds in reaching the rate threshold. " ::= { hwAdslAlarmTraps 0 2 } hwAdslPortAutoDeactiveAlarmTrap NOTIFICATION-TYPE OBJECTS { hwFrameIndex, hwSlotIndex, hwPortIndex } STATUS current DESCRIPTION "This trap message is generated when the ADSL port is automatically deactivated due to the line fault." ::= { hwAdslAlarmTraps 0 3 } hwAdslPortReactiveAlarmTrap NOTIFICATION-TYPE OBJECTS { hwFrameIndex, hwSlotIndex, hwPortIndex } STATUS current DESCRIPTION "This trap message is generated when the ADSL port is re-activated after the ADSL line recovers." ::= { hwAdslAlarmTraps 0 4 } hwAdslPortStatReachThresholdAlarmTrap NOTIFICATION-TYPE OBJECTS { hwFrameIndex, hwSlotIndex, hwPortIndex, hwadslPMThresholdItem, hwadslLinePMThresholdValue, hwadslLinePMCurrentValue } STATUS current DESCRIPTION "This trap message is generated when the performance statistics of the ADSL port reach the threshold." ::= { hwAdslAlarmTraps 0 5 } hwAdslPortATURPowerOffAlarmTrap NOTIFICATION-TYPE OBJECTS { hwFrameIndex, hwSlotIndex, hwPortIndex } STATUS current DESCRIPTION "This trap message is generated when the ATU-R is powered off." ::= { hwAdslAlarmTraps 0 6 } hwAdslPortActRateLowerThresholdAlarmTrap NOTIFICATION-TYPE OBJECTS { hwFrameIndex, hwSlotIndex, hwPortIndex, hwAdslAtucLatestTxRateInfo, hwAdslAturLatestTxRateInfo } STATUS current DESCRIPTION "This trap message is generated when the activation rate of the xDSL line is lower than the threshold." ::= { hwAdslAlarmTraps 0 7 } hwAdslChipsetNotAvailableAlarmTrap NOTIFICATION-TYPE OBJECTS { hwFrameIndex, hwSlotIndex, hwadslChipsetID } STATUS current DESCRIPTION "This trap message is generated when the ADSL chipset is not available." ::= { hwAdslAlarmTraps 0 8 } hwAdslChipsetRecoverAlarmTrap NOTIFICATION-TYPE OBJECTS { hwFrameIndex, hwSlotIndex, hwadslChipsetID } STATUS current DESCRIPTION "This trap message is generated when the ADSL chipset recovers." ::= { hwAdslAlarmTraps 0 9 } hwAdslPortDeactiveAlarmTrap NOTIFICATION-TYPE OBJECTS { hwFrameIndex, hwSlotIndex } STATUS current DESCRIPTION "Some xDSL ports or all the xDSL ports are automatically deactivated due to lack of licenses. This trap message is generated when the xDSL ports are automatically deactivated." ::= { hwAdslAlarmTraps 0 10 } END