EMAP-MIB DEFINITIONS ::= BEGIN IMPORTS huaweiUtility FROM HUAWEI-MIB OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF Integer32, Unsigned32, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE FROM SNMPv2-SMI TEXTUAL-CONVENTION FROM SNMPv2-TC; hwSiteMonitorMIB MODULE-IDENTITY LAST-UPDATED "201210240000Z" ORGANIZATION "Huawei Technologies Co., Ltd." CONTACT-INFO "Floor 5, Block 4, R&D Building, Huawei Longgang Production Base, Shenzhen, P.R.C. http: // www.huawei.com Zip: 518129." DESCRIPTION "EMAP MIB defines MIB objects which provides load and backup management, patch management NMS interfaces. The current version is v1.01" REVISION "201210240000Z" DESCRIPTION "Huawei emap mib v1.00" ::= { huaweiUtility 164 } DisplayString ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Description." SYNTAX OCTET STRING (SIZE (1..64)) RowStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Description." SYNTAX INTEGER { active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) } DateAndTime ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Description." SYNTAX OCTET STRING (SIZE (8..11)) RunStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This integer value represents running status of the system. Depending on situation there may be limits on allowed values. Operational values: (1) unknown - status has not yet been defined (2) normal - there are no activated alarms (3) alarm - alarm status " SYNTAX INTEGER { unknow(1), normal(2), alarm(3) } MeasuresRange ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Description." SYNTAX Integer32 TruthValue ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Description." SYNTAX INTEGER { true(1), false(2) } hwSiteMonitorMIBObjects OBJECT IDENTIFIER ::= { hwSiteMonitorMIB 1 } hwSiteInfo OBJECT IDENTIFIER ::= { hwSiteMonitorMIBObjects 1 } hwSiteSummary OBJECT IDENTIFIER ::= { hwSiteInfo 1 } hwSiteId OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "Site ID, default value: 000,000.Naming rule of the site device ID (six digits): The first three digits indicate the device name and the last three digits indicate the serial number (SN) of the device. If the last three digits are 000, it indicates a virtual device." ::= { hwSiteSummary 1 } hwSiteName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..63)) MAX-ACCESS read-write STATUS current DESCRIPTION "Site name, which users can configure, is used to specify a site. Otherwise, the configured character can not be any other languages except English." ::= { hwSiteSummary 2 } hwSiteAdminAddr OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Site administrant address, which users can assigned, is the unique ID of a site. It is used for device management by NMS, and value range is 0 to 65535. " ::= { hwSiteSummary 3 } hwSiteDescription OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..63)) MAX-ACCESS read-write STATUS current DESCRIPTION "Site description. It is of the character string type. It is used to describe the site information such as the site location, which users can configure. Otherwise, the configured character can not be any other languages except English." ::= { hwSiteSummary 4 } hwNetIdentifier OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..63)) MAX-ACCESS read-write STATUS current DESCRIPTION "NE ID. It is of the character string type. It is the unique ID of the site (an independent network element (NE)) on the network. Otherwise, the configured character can not be any other languages except English." ::= { hwSiteSummary 5 } hwSiteIp OBJECT-TYPE SYNTAX OCTET STRING (SIZE (8..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "Site IP address, default value is 192.168.0.10. Users need to configure the site IP address." ::= { hwSiteSummary 6 } hwSiteNetmask OBJECT-TYPE SYNTAX OCTET STRING (SIZE (8..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "Site netmask, default value is 255.255.255.0. Users need to configure the site netmask." ::= { hwSiteSummary 7 } hwSiteGateway OBJECT-TYPE SYNTAX OCTET STRING (SIZE (8..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "Site gateway, default value: 192.168.0.1. Users need to configure the site gateway." ::= { hwSiteSummary 8 } hwSiteDGWorkStatus OBJECT-TYPE SYNTAX INTEGER { idle(1), working(2), unknown(255) } MAX-ACCESS read-only STATUS current DESCRIPTION "State of the diesel working state. It is an enumeration type: If the enumeration value is 1, it indicates that the diesel is in the idle state; If the enumeration value is 2, it indicates that the diesel is in the working state; If the enumeration value is 255, it indicates diesel operation status unknown." ::= { hwSiteSummary 9 } hwSiteRunningStatus OBJECT-TYPE SYNTAX INTEGER { normal(1), alarm(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "State of the site alarm state. It is an enumeration type: If the enumeration value is 1, it indicates that the site is in the normal state; If the enumeration value is 2, it indicates that the site is in the alarm state." ::= { hwSiteSummary 10 } hwSiteSystemEsn OBJECT-TYPE SYNTAX OCTET STRING (SIZE (8..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "System ESN Report Neteco" ::= { hwSiteSummary 12 } hwSiteTime OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "Set Site date and time, YYYY-MM-DD HH:MM:SS" ::= { hwSiteSummary 13 } hwSiteNetecoPrimaryServerIP OBJECT-TYPE SYNTAX OCTET STRING (SIZE (8..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "Neteco Primary Server IP Address" ::= { hwSiteSummary 14 } hwSiteNetecoBackupServerIP OBJECT-TYPE SYNTAX OCTET STRING (SIZE (8..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "Neteco Backup Server IP Address" ::= { hwSiteSummary 15 } hwSiteNetecoPortNumber OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Neteco Port Number" ::= { hwSiteSummary 16 } hwSiteAlarms OBJECT IDENTIFIER ::= { hwSiteInfo 2 } hwDeviceTrapOrdinalNumber OBJECT-TYPE SYNTAX Unsigned32 ( 0..4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION "Site device event trap serial number (SN) is the unique ID of the device event trap. It is used to resend and synchronize event traps. Its value range is 0 to 4294967295. When the value exceeds the maximum value, the system automatically clears the value and numbers the alarm from 0 to 4294967295. If the network management system (NMS) recieve the alarm number is not consequential, in such case that it notifies the SNMP agent the event trap number required. So the monitor send the 100 event trap messages in maximum, after consequencial number required by NMS again. Specially, if NMS set the value to 0, the agent would clear the alarm queue automatically." ::= { hwSiteAlarms 1 } hwAlarmTrapOrdinalNumber OBJECT-TYPE SYNTAX Unsigned32 ( 0..4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION "Site alarm serial number (SN) is the unique ID of the alarm Trap. It is used to resend and synchronize alarms. Its value range is 0 to 4294967295. When the value exceeds the maximum value, the system automatically clears the value and numbers the alarm from 0 to 4294967295. If the network management system (NMS) recieve the alarm number is not consequential, in such case that it notifies the SNMP agent the alarm number required. So the monitor send the 100 alarm messages in maximum, after consequencial number required by NMS again. Specially, if NMS set the value to 0, the agent would clear the alarm queue automatically." ::= { hwSiteAlarms 2 } hwAlarmQuantity OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Alarm number in site alarm list which are support. It is used for alarm list management by NMS, and value range is 0 to 65535. " ::= { hwSiteAlarms 3 } hwSiteActiveAlarmTable OBJECT-TYPE SYNTAX SEQUENCE OF HwSiteActiveAlarmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { hwSiteAlarms 99 } hwSiteActiveAlarmEntry OBJECT-TYPE SYNTAX HwSiteActiveAlarmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { hwActiveAlarmIndex } ::= { hwSiteActiveAlarmTable 1 } HwSiteActiveAlarmEntry ::= SEQUENCE { hwActiveAlarmIndex Integer32, hwActiveAlarmText OCTET STRING, hwActiveAlarmLevel INTEGER, hwActiveAlarmSigDesc OCTET STRING, hwActiveAlarmTime OCTET STRING, hwActiveAlarmRowStatus RowStatus, hwSMUSiteName OCTET STRING, hwSMUSiteAdminAddr Unsigned32, hwSMUNetIdentifier OCTET STRING, hwSMUSiteDescription OCTET STRING, hwEquipId Unsigned32, hwEquipName OCTET STRING } hwActiveAlarmIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Site active alarm table index. It is the unique ID of the site alarm." ::= { hwSiteActiveAlarmEntry 1 } hwActiveAlarmText OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..63)) MAX-ACCESS read-only STATUS current DESCRIPTION "Active alarm name. It is of the character string type, and used to specify the content of a specific alarm. " ::= { hwSiteActiveAlarmEntry 2 } hwActiveAlarmLevel OBJECT-TYPE SYNTAX INTEGER { critical(1), major(2), minor(3), warning(4), unknown(255) } MAX-ACCESS read-only STATUS current DESCRIPTION "Active alarm level, which users can configure the alarm severity, is an enumeration type: If the enumeration value is 1, it indicates a critical alarm; If the enumeration value is 2, it indicates a major alarm; If the enumeration value is 3, it indicates a minor alarm; If the enumeration value is 4, it indicates a warning; If the enumeration value is 255, it indicates a unknown;" ::= { hwSiteActiveAlarmEntry 3 } hwActiveAlarmSigDesc OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..127)) MAX-ACCESS read-only STATUS current DESCRIPTION "Active alarm signal description. It is used to add and describe alarm content. Users can define the description of the alarm. Otherwise, the configured character can not be any other languages except English." ::= { hwSiteActiveAlarmEntry 4 } hwActiveAlarmTime OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..127)) MAX-ACCESS read-only STATUS current DESCRIPTION "Active alarm time. It is of the character string type, and used to specify the content of a specific alarm. " ::= { hwSiteActiveAlarmEntry 5 } hwActiveAlarmRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Rowstatus of active alarm table." ::= { hwSiteActiveAlarmEntry 100 } hwSMUSiteName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..63)) MAX-ACCESS read-only STATUS current DESCRIPTION "Site name, which users can configure, is used to specify a site. Otherwise, the configured character can not be any other languages except English." ::= { hwSiteActiveAlarmEntry 6 } hwSMUSiteAdminAddr OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Site administrant address, which users can assigned, is the unique ID of a site. It is used for device management by NMS, and value range is 0 to 65535. " ::= { hwSiteActiveAlarmEntry 7 } hwSMUNetIdentifier OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..63)) MAX-ACCESS read-only STATUS current DESCRIPTION "NE ID. It is of the character string type. It is the unique ID of the site (an independent network element (NE)) on the network. Otherwise, the configured character can not be any other languages except English." ::= { hwSiteActiveAlarmEntry 8 } hwSMUSiteDescription OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..63)) MAX-ACCESS read-only STATUS current DESCRIPTION "Site description. It is of the character string type. It is used to describe the site information such as the site location, which users can configure. Otherwise, the configured character can not be any other languages except English." ::= { hwSiteActiveAlarmEntry 9 } hwEquipId OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Equipment ID. Value range: 000,000 to 000,100, in which the first three digits indicate the device type and the last three digits indicate the device SN. " ::= { hwSiteActiveAlarmEntry 10 } hwEquipName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..63)) MAX-ACCESS read-only STATUS current DESCRIPTION "Equipment name. It is of the character string type, and users can set the name of the monitor. Otherwise, the configured character can not be any other languages except English." ::= { hwSiteActiveAlarmEntry 11 } hwSiteAlarmTable OBJECT-TYPE SYNTAX SEQUENCE OF HwSiteAlarmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "/" ::= { hwSiteAlarms 100 } hwSiteAlarmEntry OBJECT-TYPE SYNTAX HwSiteAlarmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "/" INDEX { hwAlarmIndex } ::= { hwSiteAlarmTable 1 } HwSiteAlarmEntry ::= SEQUENCE { hwAlarmIndex Unsigned32, hwAlarmText OCTET STRING, hwAlarmLevel INTEGER, hwAlarmSigDesc OCTET STRING, hwAlarmRowStatus RowStatus } hwAlarmIndex OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Site alarm table index. It is the unique ID of the site alarm." ::= { hwSiteAlarmEntry 1 } hwAlarmText OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..63)) MAX-ACCESS read-only STATUS current DESCRIPTION "Alarm name. It is of the character string type, and used to specify the content of a specific alarm. " ::= { hwSiteAlarmEntry 2 } hwAlarmLevel OBJECT-TYPE SYNTAX INTEGER { critical(1), major(2), minor(3), warning(4), unknown(255) } MAX-ACCESS read-write STATUS current DESCRIPTION "Alarm level, which users can configure the alarm severity, is an enumeration type: If the enumeration value is 1, it indicates a critical alarm; If the enumeration value is 2, it indicates a major alarm; If the enumeration value is 3, it indicates a minor alarm; If the enumeration value is 4, it indicates a warning; " ::= { hwSiteAlarmEntry 3 } hwAlarmSigDesc OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..127)) MAX-ACCESS read-only STATUS current DESCRIPTION "Alarm signal description. It is used to add and describe alarm content. Users can define the description of the alarm. Otherwise, the configured character can not be any other languages except English." ::= { hwSiteAlarmEntry 4 } hwAlarmRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus of site alarms table." ::= { hwSiteAlarmEntry 100 } hwSiteStatus OBJECT IDENTIFIER ::= { hwSiteInfo 3 } hwAcInputStatus OBJECT-TYPE SYNTAX INTEGER { noalarm(0), alarm(1), } MAX-ACCESS read-only STATUS current DESCRIPTION "AC fail 0: no alarm, 1:alarm" ::= { hwSiteStatus 1 } hwRectifierStatus OBJECT-TYPE SYNTAX INTEGER { noalarm(0), alarm(1), } MAX-ACCESS read-only STATUS current DESCRIPTION "Rectifier fault 0: no alarm, 1:alarm" ::= { hwSiteStatus 2 } hwBatteryDischarge OBJECT-TYPE SYNTAX INTEGER { noalarm(0), alarm(1), } MAX-ACCESS read-only STATUS current DESCRIPTION "Battery discharge 0: no alarm, 1:alarm" ::= { hwSiteStatus 3 } hwBatteryLowVoltage OBJECT-TYPE SYNTAX INTEGER { noalarm(0), alarm(1), } MAX-ACCESS read-only STATUS current DESCRIPTION "Battery low voltage 0: no alarm, 1:alarm" ::= { hwSiteStatus 4 } hwBatteryUltraLowVoltage OBJECT-TYPE SYNTAX INTEGER { noalarm(0), alarm(1), } MAX-ACCESS read-only STATUS current DESCRIPTION "Battery ultra-low voltage 0: no alarm, 1:alarm" ::= { hwSiteStatus 5 } hwBatteryDisconnect OBJECT-TYPE SYNTAX INTEGER { noalarm(0), alarm(1), } MAX-ACCESS read-only STATUS current DESCRIPTION "Battery disconnect 0: no alarm, 1:alarm" ::= { hwSiteStatus 6 } hwFuseBroken OBJECT-TYPE SYNTAX INTEGER { noalarm(0), alarm(1), } MAX-ACCESS read-only STATUS current DESCRIPTION "Load fuse or battery fuse broken 0: no alarm, 1:alarm" ::= { hwSiteStatus 7 } hwLowRecitiferCapacity OBJECT-TYPE SYNTAX INTEGER { noalarm(0), alarm(1), } MAX-ACCESS read-only STATUS current DESCRIPTION "large load current and low rectifier capacity 0: no alarm, 1:alarm" ::= { hwSiteStatus 8 } hwBatteryTestNegative OBJECT-TYPE SYNTAX INTEGER { noalarm(0), alarm(1), } MAX-ACCESS read-only STATUS current DESCRIPTION "Battery test result negative 0: no alarm, 1:alarm" ::= { hwSiteStatus 9 } hwUrgentAlarmStatus OBJECT-TYPE SYNTAX INTEGER { noalarm(0), alarm(1), } MAX-ACCESS read-only STATUS current DESCRIPTION "Urgent Alarm 0: no alarm, 1:alarm" ::= { hwSiteStatus 10 } hwNonurgentAlarmStatus OBJECT-TYPE SYNTAX INTEGER { noalarm(0), alarm(1), } MAX-ACCESS read-only STATUS current DESCRIPTION "Non-Urgent Alarm 0: no alarm, 1:alarm" ::= { hwSiteStatus 11 } hwSiteMonitors OBJECT IDENTIFIER ::= { hwSiteMonitorMIBObjects 2 } hwMonitorsGroup OBJECT IDENTIFIER ::= { hwSiteMonitors 1 } hwMonsGroupId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Site monitor group ID, is the unique ID of the site monitors." ::= { hwMonitorsGroup 1 } hwMonsGroupName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..63)) MAX-ACCESS read-write STATUS current DESCRIPTION "Site monitor group name is of the character string type, used to specify the monitor group. Users can configure it. Otherwise, the configured character can not be any other languages except English." ::= { hwMonitorsGroup 2 } hwMonsQuantity OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Total site intelligent monitors. Units:pcs." ::= { hwMonitorsGroup 3 } hwMonitor OBJECT IDENTIFIER ::= { hwSiteMonitors 2 } hwMonitorTable OBJECT-TYPE SYNTAX SEQUENCE OF HwMonitorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "/" ::= { hwMonitor 1 } hwMonitorEntry OBJECT-TYPE SYNTAX HwMonitorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "/" INDEX { hwMonIndex } ::= { hwMonitorTable 1 } HwMonitorEntry ::= SEQUENCE { hwMonIndex Integer32, hwMonEquipId Unsigned32, hwMonEquipName OCTET STRING, hwMonEquipDescription OCTET STRING, hwMonEquipSoftwareVersion OCTET STRING, hwMonEquipPcbVersion OCTET STRING, hwMonEquipManufacturer OCTET STRING, hwMonEquipManuDate OCTET STRING, hwMonEquipSerialNo OCTET STRING, hwMonEquipOperTotalTime Unsigned32, hwSetMonEquipCtrlState INTEGER, hwCtrlMonEquipReset INTEGER, hwMonitorOperStatus INTEGER, hwMonRowStatus RowStatus } hwMonIndex OBJECT-TYPE SYNTAX Integer32 (1..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Table index of the site monitors (hwSiteMonitorTable) is restricted by the quantity of the site monitors (hwMonsQuantity). Value range: 1 to 100." ::= { hwMonitorEntry 1 } hwMonEquipId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Site monitor ID. Value range: 001,001 to 001,100, in which the first three digits indicate the device type and the last three digits indicate the device SN. " ::= { hwMonitorEntry 2 } hwMonEquipName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..63)) MAX-ACCESS read-write STATUS current DESCRIPTION "Monitor name. It is of the character string type, and users can set the name of the monitor. Otherwise, the configured character can not be any other languages except English." ::= { hwMonitorEntry 3 } hwMonEquipDescription OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..63)) MAX-ACCESS read-write STATUS current DESCRIPTION "Monitor description. It is of the character string type. Users can set the description of the monitor. Otherwise, the configured character can not be any other languages except English." ::= { hwMonitorEntry 4 } hwMonEquipSoftwareVersion OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..63)) MAX-ACCESS read-only STATUS current DESCRIPTION "Monitor software version. It is of the character string type." ::= { hwMonitorEntry 5 } hwMonEquipPcbVersion OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..63)) MAX-ACCESS read-only STATUS current DESCRIPTION "Monitor printed circuit board (PCB) hardware version. It is of the character string type." ::= { hwMonitorEntry 6 } hwMonEquipManufacturer OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..63)) MAX-ACCESS read-only STATUS current DESCRIPTION "Monitor manufacture. It is of the character string type, and is an inherent attribute of the device." ::= { hwMonitorEntry 7 } hwMonEquipManuDate OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..127)) MAX-ACCESS read-only STATUS current DESCRIPTION "Monitor production date. It is of the character string type, and is an inherent attribute of the device. " ::= { hwMonitorEntry 8 } hwMonEquipSerialNo OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..127)) MAX-ACCESS read-only STATUS current DESCRIPTION "Production SN of the monitor. It is the electronic tag of the products." ::= { hwMonitorEntry 9 } hwMonEquipOperTotalTime OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Total monitor runtime. The monitor counts the data in real time. Value range is 0 to 65535, The value is an integer (1), Units:hours. (h). It is used for performance measurement and evaluation of the monitor." ::= { hwMonitorEntry 10 } hwSetMonEquipCtrlState OBJECT-TYPE SYNTAX INTEGER { manualMode(1), autoMode(2), unknown(255) } MAX-ACCESS read-write STATUS current DESCRIPTION "Monitor control status. It is an enumeration type: If the enumeration value is 1, it indicates the background control; If the enumeration value is 2, it indicates the automatic control. If the enumeration value is 255, it indicates monitor module operation status unknown. In manual state, monitor works under background commands; while monitors runs well automatically in auto state. For details, see the corresponding user manual of the monitor." ::= { hwMonitorEntry 11 } hwCtrlMonEquipReset OBJECT-TYPE SYNTAX INTEGER { normal(1), reset(2), unknown(255) } MAX-ACCESS read-write STATUS current DESCRIPTION "Warm-reset control of the monitor. It is an enumeration type: If the enumeration value is 1, it indicates the Warm-reset control of the monitor is normal; If the enumeration value is 2, it indicates the Warm-reset control of the monitor is reset. If the enumeration value is 255, it indicates the Warm-reset control of the monito is unknown. " ::= { hwMonitorEntry 12 } hwMonitorOperStatus OBJECT-TYPE SYNTAX INTEGER { normal(1), commRs485Fail(2), commNetFail(3), fault(4), alarmResume(254), unknown(255) } MAX-ACCESS read-only STATUS current DESCRIPTION "State of the site monitor module. It is an enumeration type: If the enumeration value is 1, it indicates that the site monitor module is in the normal state; If the enumeration value is 2, it indicates that the monitor module RS485 port communication failed; If the enumeration value is 3, it indicates that the monitor module net port communication failed; If the enumeration value is 4, it indicates that a fault occurs on the monitor module; If the enumeration value is 254, it indicates monitor module alarm resume; If the enumeration value is 255, it indicates monitor module operation status unknown. " ::= { hwMonitorEntry 99 } hwMonRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus of site monitor." ::= { hwMonitorEntry 100 } hwSiteRectifiers OBJECT IDENTIFIER ::= { hwSiteMonitorMIBObjects 3 } hwRectsGroup OBJECT IDENTIFIER ::= { hwSiteRectifiers 1 } hwRectsGroupId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Device group ID of the rectifier module. It is the unique ID of the rectifier module group, and its default value: 002,000. The first digits indicate the device type and the last three digits indicate the device SN. If the last three digits are 000, it indicates a virtual device. " ::= { hwRectsGroup 1 } hwRectsGroupName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..63)) MAX-ACCESS read-write STATUS current DESCRIPTION "Name of the rectifier module group, character string type, is used to specify the rectifier module group. Users can configure it. Otherwise, the configured character can not be any other languages except English." ::= { hwRectsGroup 2 } hwRectsTotalCurrent OBJECT-TYPE SYNTAX Unsigned32 (0..200000) MAX-ACCESS read-only STATUS current DESCRIPTION "Total current of the rectifier module group on the site. It indicates the real-time statistics of the rectifier module group on the site. Default value: 0 to 20000, units: A, and the value is accurate to one decimal place (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwRectsGroup 3 } hwRectsTotalQuantity OBJECT-TYPE SYNTAX Unsigned32 (0..256) MAX-ACCESS read-only STATUS current DESCRIPTION "Total quantity of the rectifier modules. Value range: 0 to 256. Units:pcs." ::= { hwRectsGroup 4 } hwRectsRatedVoltage OBJECT-TYPE SYNTAX Unsigned32 (420..583) MAX-ACCESS read-only STATUS current DESCRIPTION "Rated voltage of the rectifier module group. It is an inherent attribute. Value range: 42 to 58.3, Units: V, and the value is accurate to one decimal place (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwRectsGroup 5 } hwModifyRectsOutputVoltage OBJECT-TYPE SYNTAX Unsigned32 (410..590) MAX-ACCESS read-write STATUS current DESCRIPTION "Voltage adjustment of the rectifier module, which users can configure it. Value range: 41 to 59, Units: V, and the value is accurate to one decimal space (.1). Based on the actual requirements, users can modify the output voltage of the rectifier module by modifying the value of the node. If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid. NOTES: Be cautious about changing the value of the node. Only the system in manual mode, this parameter can be configured successfully." ::= { hwRectsGroup 6 } hwSetRectsRedundEnable OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2), funcNotSupport(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Sleep function of the rectifier module group on the site. It is an enumeration value: If the NMS notifies the SNMP agent that this node is set to 1, it means to disable the sleep function of the rectifier module group; If the NMS notifies the SNMP agent that this node is set to 2, it means to enable the sleep function of the rectifier module group. If NMS get the node value is 3, it indicates that this function is not support, and in such case the value set to the agent is invalid. Default value: to disable the sleep function of the rectifier module group. For details, see the corresponding user manual of the monitor." ::= { hwRectsGroup 7 } hwCtrlRectsAllOnOff OBJECT-TYPE SYNTAX INTEGER { on(1), off(2), nullOper(255) } MAX-ACCESS read-write STATUS current DESCRIPTION "Power-on or power-off of the rectifier module group (all the rectifier modules) on the site. It is an enumeration value: If the NMS notifies the SNMP agent that this node is set to 1, it indicates power-on of all rectifier modules; If the NMS notifies the SNMP agent that this node is set to 2, it indicates power-off of all the rectifier modules; If the NMS notifies the SNMP agent that this node is set to 255, it indicates nullOper of all the rectifier modules. NOTE: Only the system in manual mode, this parameter can be configured successfully." ::= { hwRectsGroup 8 } hwRectsTotalDCPower OBJECT-TYPE SYNTAX Unsigned32 (0..100000000) MAX-ACCESS read-only STATUS current DESCRIPTION "Total power of the direct current output. Value range: 0 to 100000000, units: W, and the value is an integer. If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwRectsGroup 9 } hwRectsLoadUsage OBJECT-TYPE SYNTAX Unsigned32 (0..150) MAX-ACCESS read-only STATUS current DESCRIPTION "Load Usage. Value range: 0 to 150, units: %, and the value is an integer. If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwRectsGroup 10 } hwRectsTotalACInputPower OBJECT-TYPE SYNTAX Unsigned32 (0..100000000) MAX-ACCESS read-only STATUS current DESCRIPTION "Total power of the direct current output. Value range: 0 to 100000000, units: W, and the value is an integer. If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwRectsGroup 11 } hwRectsHighRectifierCapacity OBJECT-TYPE SYNTAX Unsigned32 (0..150) MAX-ACCESS read-write STATUS current DESCRIPTION "High rectifier capacity. Value range: 0 to 150, units: %, and the value is an integer. If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwRectsGroup 12 } hwRectsLowRectifierCapacity OBJECT-TYPE SYNTAX Unsigned32 (0..150) MAX-ACCESS read-write STATUS current DESCRIPTION "Low rectifier capacity. Value range: 0 to 150, units: %, and the value is an integer. If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwRectsGroup 13 } hwRectsOverVoltProtThres OBJECT-TYPE SYNTAX Unsigned32 (560..605) MAX-ACCESS read-write STATUS current DESCRIPTION "Overvoltage protection threshold. Value range: 56.0 to 60.5, units: V, and the value is accurate to one decimal space (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwRectsGroup 14 } hwRectifier OBJECT IDENTIFIER ::= { hwSiteRectifiers 2 } hwRectConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF HwRectConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Rectifier config information table. Use this table to get rectifiers equipment ID, software version, manufacturer, rated current, efficency, AC input type, and to control equipment on or off. This table's index is hwRectConfigIndex, clone Rectifier config information table." ::= { hwRectifier 1 } hwRectConfigEntry OBJECT-TYPE SYNTAX HwRectConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Rectifier config information table. Use this table to get rectifiers equipment ID, software version, manufacturer, rated current, efficency, AC input type, and to control equipment on or off. This table's index is hwRectConfigIndex, clone Rectifier config information table." INDEX { hwRectConfigIndex } ::= { hwRectConfigTable 1 } HwRectConfigEntry ::= SEQUENCE { hwRectConfigIndex Integer32, hwRectEquipId Unsigned32, hwRectEquipName OCTET STRING, hwRectType INTEGER, hwRectSoftwareVersion OCTET STRING, hwRectManufacturer OCTET STRING, hwRectManuDate OCTET STRING, hwRectSerialNo OCTET STRING, hwRectRatedCurrent Unsigned32, hwRectEfficency Unsigned32, hwRectInputAcType INTEGER, hwCtrlRectOnOff INTEGER, hwRectConfigRowStatus RowStatus } hwRectConfigIndex OBJECT-TYPE SYNTAX Integer32 (1..256) MAX-ACCESS read-only STATUS current DESCRIPTION "Index of the device configuration list for the rectifier modules, which value range: 1 to 256(To the actual subject). Lines of the device list are restricted by the total quantity of the rectifier modules (hwRectsTotalQuantity)." ::= { hwRectConfigEntry 1 } hwRectEquipId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Rectifier module ID. Value range: 002'001 to 002'255. The first digits indicate the device type and last three digits indicate the device SN. " ::= { hwRectConfigEntry 2 } hwRectEquipName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..63)) MAX-ACCESS read-only STATUS current DESCRIPTION "Device name of the rectifier module, character string type, is used to specify the rectifier module. Users can configure it. Otherwise, the configured character can not be any other languages except English." ::= { hwRectConfigEntry 3 } hwRectType OBJECT-TYPE SYNTAX INTEGER { eps5(1), eps15(2), eps30(3), eps50(4), eps100(5), unknown(255) } MAX-ACCESS read-only STATUS current DESCRIPTION "Specific type of the rectifier module. It is an enumeration type: If the enumeration value is 1, it indicates a 5A rectifier module; If the enumeration value is 2, it indicates a 15A rectifier module; If the enumeration value is 3, it indicates a 30A rectifier module; If the enumeration value is 4, it indicates a 50A rectifier module; If the enumeration value is 5, it indicates a 100A rectifier module." ::= { hwRectConfigEntry 4 } hwRectSoftwareVersion OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..63)) MAX-ACCESS read-only STATUS current DESCRIPTION "Software version of the rectifier module. It indicates the software version ID of the module. " ::= { hwRectConfigEntry 5 } hwRectManufacturer OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..63)) MAX-ACCESS read-only STATUS current DESCRIPTION "Manufacture of the rectifier module." ::= { hwRectConfigEntry 6 } hwRectManuDate OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..127)) MAX-ACCESS read-only STATUS current DESCRIPTION "Manufacture date of rectifiers is of string type." ::= { hwRectConfigEntry 7 } hwRectSerialNo OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..127)) MAX-ACCESS read-only STATUS current DESCRIPTION "Rectifier module SN. It indicates the electronic tag of the product." ::= { hwRectConfigEntry 8 } hwRectRatedCurrent OBJECT-TYPE SYNTAX Unsigned32 (0..2000) MAX-ACCESS read-only STATUS current DESCRIPTION "Rated voltage of the rectifier module, is an inherent attribute. Value range: 0 to 200, Units: A, and the value is accurate to one decimal place (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid. " ::= { hwRectConfigEntry 9 } hwRectEfficency OBJECT-TYPE SYNTAX Unsigned32 (0..1000) MAX-ACCESS read-only STATUS current DESCRIPTION "Efficiency of the rectifier module, is an inherent attribute. Value range: 0 to 100, Units: %, and the value is accurate to one decimal place (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwRectConfigEntry 10 } hwRectInputAcType OBJECT-TYPE SYNTAX INTEGER { single(1), triple(2), threeLivelines(3), doubleLiveLines(4), unknown(255) } MAX-ACCESS read-only STATUS current DESCRIPTION "Input AC type of the rectifier module. It is an enumeration value: If the value of the node is 1, it indicates single-phase AC input; If the value of the node is 2, it indicates three-phase AC input; If the value of the node is 3, it indicates three-livelines AC input; If the value of the node is 4, it indicates double-liveLines AC input; If the value of the node is 255, it indicates unknown AC input. " ::= { hwRectConfigEntry 11 } hwCtrlRectOnOff OBJECT-TYPE SYNTAX INTEGER { on(1), off(2), nullOper(255) } MAX-ACCESS read-write STATUS current DESCRIPTION "Power-on or power-off of the rectifier module, is an enumeration value. Users can modify the enumeration value of this node, thus controlling of the power-on or power-off of the rectifier module: If the NMS notifies the SNMP agent that this node is set to 1, it indicates power-on of the rectifier module; If the NMS notifies the SNMP agent that this node is set to 2, it indicates power-off of the rectifier module. " ::= { hwRectConfigEntry 12 } hwRectConfigRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus of rectifier config table." ::= { hwRectConfigEntry 100 } hwRectOperTable OBJECT-TYPE SYNTAX SEQUENCE OF HwRectOperEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Rectifier runing information table. Use this table to get rectifiers output current, output voltage, totle runing time, and current run status. This table's index is hwRectRunIndex, clone rectifier runing information table." ::= { hwRectifier 2 } hwRectOperEntry OBJECT-TYPE SYNTAX HwRectOperEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Rectifier runing information table. Use this table to get rectifiers output current, output voltage, totle runing time, and current run status. This table's index is hwRectRunIndex, clone rectifier runing information table." INDEX { hwRectOperIndex } ::= { hwRectOperTable 1 } HwRectOperEntry ::= SEQUENCE { hwRectOperIndex Integer32, hwRectOutputCurrent Unsigned32, hwRectOutputVoltage Unsigned32, hwRectTotalOperTime Unsigned32, hwRectDCOutputPower Unsigned32, hwRectACVoltage Unsigned32, hwRectRatedEfficiency Unsigned32, hwRectifierTemperature Integer32, hwRectOperStatus INTEGER, hwRectOperRowStatus RowStatus } hwRectOperIndex OBJECT-TYPE SYNTAX Integer32 (1..256) MAX-ACCESS read-only STATUS current DESCRIPTION "Table index of the running rectifier modules, which value range: 1 to 256(To the actual subject). Lines of the device list are restricted by the total quantity of the rectifier modules (hwRectsTotalQuantity)." ::= { hwRectOperEntry 1 } hwRectOutputCurrent OBJECT-TYPE SYNTAX Unsigned32 (0..3000) MAX-ACCESS read-only STATUS current DESCRIPTION "Output current of the rectifier module. It is a real-time analog parameter. Value range: 0 to 300, Units: A, and the value is accurate to one decimal place (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwRectOperEntry 2 } hwRectOutputVoltage OBJECT-TYPE SYNTAX Unsigned32 (0..650) MAX-ACCESS read-only STATUS current DESCRIPTION "Output voltage of the rectifier module. It is a real-time analog parameter. Value range: 0 to 65, Units: V, the value is accurate to one decimal place (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid. " ::= { hwRectOperEntry 3 } hwRectTotalOperTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total runtime of the rectifier module. Value units: minute (m), and the value is an integer (1). " ::= { hwRectOperEntry 4 } hwRectDCOutputPower OBJECT-TYPE SYNTAX Unsigned32 (0..30000) MAX-ACCESS read-only STATUS current DESCRIPTION "DC output power. Value range: 0 to 30000, units: W, and the value is an integer.(1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwRectOperEntry 5 } hwRectACVoltage OBJECT-TYPE SYNTAX Unsigned32 (0..6000) MAX-ACCESS read-only STATUS current DESCRIPTION "AC input voltage. Value range: 0 to 600, units: V, and the value is accurate to one decimal space (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwRectOperEntry 6 } hwRectRatedEfficiency OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Rated Efficiency. Value range: 0 to 100, units: %, and the value is an integer.(1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwRectOperEntry 7 } hwRectifierTemperature OBJECT-TYPE SYNTAX Integer32 (-3000..3000) MAX-ACCESS read-only STATUS current DESCRIPTION "Rectifier Temperature. Value range: -300 to 300, units: degC, and the value is accurate to one decimal space (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwRectOperEntry 8 } hwRectOperStatus OBJECT-TYPE SYNTAX INTEGER { normal(1), fault(2), protect(3), commFail(4), switchOff(5), invalid(6), noConfig(7), acOff(8), rectLost(9), alarmResume(254), unknown(255) } MAX-ACCESS read-only STATUS current DESCRIPTION "State of the rectifier module. It is an enumeration type: If the enumeration value is 1, the rectifier module is in the normal state; If the enumeration value is 2, a fault occurs on the rectifier module; If the enumeration value is 3, automatic protection of the rectifier module; If the enumeration value is 4, communication of the rectifier module fails; If the enumeration value is 5, the rectifier module is shut down; If the enumeration value is 6, the rectifier module is invalid; If the enumeration value is 7, this rectifier is not configured; If the enumeration value is 8, this rectifier is ac off; If the enumeration value is 9, this rectifier is rectLost; If the enumeration value is 254, rectifier alarm resume; If the enumeration value is 255, rectifier operation status unknown." ::= { hwRectOperEntry 99 } hwRectOperRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus of rectifier runing table." ::= { hwRectOperEntry 100 } hwSiteBatterys OBJECT IDENTIFIER ::= { hwSiteMonitorMIBObjects 4 } hwBattsConfig OBJECT IDENTIFIER ::= { hwSiteBatterys 1 } hwBattsGroupId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Battery group ID. It is the unique ID of the battery group device. The first digits indicate the device type and the last three digits indicate the device SN. If the last three digits are 000, it indicates a virtual device. " ::= { hwBattsConfig 1 } hwBattsGroupName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..63)) MAX-ACCESS read-write STATUS current DESCRIPTION "Device name of the battery group. It is of the character string type, which can be configured by users. Otherwise, the configured character can not be any other languages except English." ::= { hwBattsConfig 2 } hwBattsTotalQuantity OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Total quantity of battery strings, which value range: 0 to 100. Units:strings." ::= { hwBattsConfig 3 } hwSetBattsHighTempAction OBJECT-TYPE SYNTAX INTEGER { blvd(1), lowerDcOutput(2), disable(255) } MAX-ACCESS read-write STATUS current DESCRIPTION "Battery high-temperature protection mode. It is an enumeration value, and can be configured. If the enumeration value is 1, it indicates the power-off protection mode; If the enumeration value is 2, it indicates the protection mode of lowering the output voltage of the rectifier module. If the enumeration value is 255, it indicates do nothing. " ::= { hwBattsConfig 4 } hwSetBattsHighTempVoltLimit OBJECT-TYPE SYNTAX Unsigned32 (420..530) MAX-ACCESS read-write STATUS current DESCRIPTION "Battery protection voltage under high temperature. It works with the low-voltage power-off protection in battery high-temperature protection mode, which can be configured by users. If the low-voltage power-off protection mode (that is, the enumeration value is 1) is selected, the node is a low-voltage power-off node. Value range: 42 to 53, units: V, and the value is accurate to one decimal place (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwBattsConfig 5 } hwSetBattsHTDLimit OBJECT-TYPE SYNTAX Integer32 (25..80) MAX-ACCESS read-write STATUS current DESCRIPTION "Upper threshold of the battery high temperature disconnection(HTD), can be configured by users. Value range: 25 to 80, Units: centigrade (degC), and the value is an integer (1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid. NOTE: There is linkage between hwSetBattsHTDLimit and hwSetBattsTempUpperLimit" ::= { hwBattsConfig 6 } hwSetBattsHTDEnable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Battery high temperature disconnection enable. It is an enumeration type: If the enumeration value is 1, enable the operation of the battery disconnection in high temperature; If the enumeration value is 2, disable the operation of the battery disconnection in high temperature. The operation of the battery disconnection in high temperature is disabled by default. " ::= { hwBattsConfig 7 } hwSetBattsFloatVoltage OBJECT-TYPE SYNTAX Unsigned32 (420..583) MAX-ACCESS read-write STATUS current DESCRIPTION "Float charge voltage of the batteries, can be configured by users. Value range: 42 to 58.3, units: V, and the value is accurate to one decimal place (.1) If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid. NOTE: There is linkage between hwSetBattsFloatVoltage and hwSetBattsBoostVoltage " ::= { hwBattsConfig 8 } hwSetBattsBoostVoltage OBJECT-TYPE SYNTAX Unsigned32 (420..583) MAX-ACCESS read-write STATUS current DESCRIPTION "Boostcharge voltage of the batteries, can be configured by users. Value range: 42 to 58.3, units: V, and the value is accurate to one decimal place (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid. NOTE: There is linkage between hwSetBattsFloatVoltage and hwSetBattsBoostVoltage" ::= { hwBattsConfig 9 } hwSetBattsCurrLimitCoefficient OBJECT-TYPE SYNTAX Unsigned32 (5..50) MAX-ACCESS read-write STATUS current DESCRIPTION "Current-limiting point coefficient of the batteries, can be configured by users. Value range: 0.05 to 0.5, units: C10, and the value is accurate to two decimal places (.01). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid. There is linkage between hwSetBattsChargeOvercurAlmThreshold and hwSetBattsCurrLimitCoefficient. Current-limiting point coefficient must be less than or equal to the charge overcurrent alarm threshold." ::= { hwBattsConfig 10 } hwSetBattsCompFactor OBJECT-TYPE SYNTAX Unsigned32 (0..500) MAX-ACCESS read-write STATUS current DESCRIPTION "Temperature compensated coefficient of the batteries, can be configured by user. Value range: 0 to 500, units: mv per centigrade, and the value is an integer (1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwBattsConfig 11 } hwCtrlBattsBoostFloat OBJECT-TYPE SYNTAX INTEGER { floatCharge(1), boostCharge(2), nullOper(255) } MAX-ACCESS read-write STATUS current DESCRIPTION "Control batteries charge mode between boost and float. It is an enumeration value. Users actively control the conversion. If the NMS notifies the SNMP agent that this node is set to 1, it means to start the float charge mode of the batteries; If the NMS notifies the SNMP agent that this node is set to 2, it means to start the boost charge mode of the batteries. If the NMS notifies the SNMP agent that this node is set to 255, it means to start the mode of the batteries is nullOper. " ::= { hwBattsConfig 12 } hwSetBattsRatedCapacity OBJECT-TYPE SYNTAX Unsigned32 (5..10000) MAX-ACCESS read-write STATUS current DESCRIPTION "Set batteries rated capacity. It is an analog parameter collected by the battery string in real time. Value range: 5 to 10000, units: Ah, the value is an integer (1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwBattsConfig 13 } hwSetBattsTimedBoostChargeEnabled OBJECT-TYPE SYNTAX INTEGER { disable(1),enable(2),unknown(255) } MAX-ACCESS read-write STATUS current DESCRIPTION "Timed Boost Charge Enabled. It is an enumeration value, and can be configured. If the enumeration value is 1, it indicates timed boost charge is disabled; If the enumeration value is 2, it indicates timed boost charge is enabled. If the enumeration value is 255, it indicates timed boost charge is unknown. " ::= { hwBattsConfig 14 } hwSetBattsTimedBoostChargePeriod OBJECT-TYPE SYNTAX Unsigned32 (1..365) MAX-ACCESS read-write STATUS current DESCRIPTION "Timed Boost Charge Interval. Value range: 1 to 365, units: Day, and the value is an integer.(1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwBattsConfig 15 } hwSetBattsMaxTimedBCDuration OBJECT-TYPE SYNTAX Unsigned32 (1..24) MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum Timed Boost Charge Duration. Value range: 1 to 24, units: h, and the value is an integer.(1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwBattsConfig 16 } hwSetBattsChargeOvercurAlmThreshold OBJECT-TYPE SYNTAX Unsigned32 (5..100) MAX-ACCESS read-write STATUS current DESCRIPTION "Charge Overcurrent Alarm Threshold. Value range: 0.05 to 1, units: C10, and the value is accurate to two decimal space (.01). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid. There is linkage between hwSetBattsChargeOvercurAlmThreshold and hwSetBattsCurrLimitCoefficient. Current-limiting point coefficient must be less than or equal to the charge overcurrent alarm threshold." ::= { hwBattsConfig 17 } hwSetBattsLowCapacityAlarmThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..90) MAX-ACCESS read-write STATUS current DESCRIPTION "Low Capacity Alarm Threshold. Value range: 0 to 90, units: %, and the value is an integer. (1) If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwBattsConfig 18 } hwBattsOperate OBJECT IDENTIFIER ::= { hwSiteBatterys 2 } hwBattsTotalCurrent OBJECT-TYPE SYNTAX Integer32 ( -4000000..4000000) MAX-ACCESS read-only STATUS current DESCRIPTION "Total current of the battery group. It indicates the real-time statistics of the battery group on the site. Value range: -400000 to +400000, units: A, and the value is accurate to one decimal place (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwBattsOperate 1 } hwBattsPreDischargeTime OBJECT-TYPE SYNTAX Unsigned32 (0..15360) MAX-ACCESS read-only STATUS current DESCRIPTION "Battery group backup time. It indicates the real-time statistics of the battery group. Value range: 0 to 15360, Units: minutes (min), and the value is an integer (1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwBattsOperate 2 } hwBattsChargeStatus OBJECT-TYPE SYNTAX INTEGER { floatCharge(1), boostCharge(2), disCharge(3), hibernating(4), offline(7), unknown(255) } MAX-ACCESS read-only STATUS current DESCRIPTION "Battery charging state, indicates the charging and discharging information about the battery group. It is an enumeration type. If the enumeration value is 1, it indicates a battery group in the float charging state. If the enumeration value is 2, it indicates a battery group in the boost charging state. If the enumeration value is 3, it indicates a battery group in the discharging state. If the enumeration value is 4, it indicates a battery group in the hibernating state. If the enumeration value is 7, it indicates a battery group in the Offline state. If the enumeration value is 7, it indicates a battery group in the Offline state. " ::= { hwBattsOperate 3 } hwBattsCurrLimitStatus OBJECT-TYPE SYNTAX INTEGER { unlimited(1), limited(2), unknown(255) } MAX-ACCESS read-only STATUS current DESCRIPTION "Battery group current-limiting state, indicates the state information about the battery group. It is an enumeration value. If the enumeration value is 1, it indicates that the current of the battery group is not limited. If the enumeration value is 2, it indicates the current of the battery group is limited. If the enumeration value is 2, it indicates the current of the battery group is unknown. " ::= { hwBattsOperate 4 } hwBattsTemprature1 OBJECT-TYPE SYNTAX Integer32 ( -300..200) MAX-ACCESS read-only STATUS current DESCRIPTION "Battery temperature. It is a battery parameter collected in real time. Value range: -300 to 200, unit: centigrade (degC), and the value is an integer . If the value is 2147483647(0x7FFFFFFF), it indicates that battery temperature sensor is not configured." ::= { hwBattsOperate 5 } hwBattsTemprature2 OBJECT-TYPE SYNTAX Integer32 ( -50..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Battery temperature. It is a battery parameter collected in real time. Value range: -50 to +100, unit: centigrade (degC), and the value is an integer (1). If the value is 2147483647(0x7FFFFFFF), it indicates that battery temperature sensor is not configured." ::= { hwBattsOperate 6 } hwBattsAlarmsClear OBJECT-TYPE SYNTAX INTEGER { clearBattTestFailAlm(1), clearBattTestCanceledAlm(2), clearHighStrImpedanceAlm(3), clearHighFloatCurrAlm(4), clearCurrImbalanceAlm(5), clearContactorFaultAlm(6), nullOper(255) } MAX-ACCESS read-write STATUS current DESCRIPTION "Battery alarms clear. It is an enumeration type: If the enumeration value is 1, it indicates the clear batt test fail alarm ; If the enumeration value is 2, it indicates the clear batt test canceled alarm . If the enumeration value is 3, it indicates the clear high str impedance alarm . If the enumeration value is 4, it indicates the clear high float current alarm . If the enumeration value is 5, it indicates the clear current imbalance alarm . If the enumeration value is 6, it indicates the clear contactor fault alarm . If the enumeration value is 255, it indicates null oper(can't set to smu)." ::= { hwBattsOperate 7 } hwBattsRatedCapacity OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Batteries actual capacity. It is an analog parameter collected by the battery string in real time. Value range: 0 to 2147483647, units: Ah, the value is an integer (1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwBattsOperate 8 } hwBattsRemainCapacity OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Remaining capacity of all of the battery. It is an analog parameter collected by the battery string in real time. Value range: 0 to 2147483647, units: Ah, and the value is an integer (1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwBattsOperate 9 } hwTotalRemainingCapacityPercent OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Total Remaining Capacity Percent. Value range: 0 to 100, units: %, and the value is an integer.(1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwBattsOperate 10 } hwBattsTotalDischargeDepth OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Battery Total Discharge Depth Percent. Value range: 0 to 100, units: %, and the value is an integer. If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwBattsOperate 11 } hwBattsTest OBJECT IDENTIFIER ::= { hwSiteBatterys 3 } hwBattsTestRecordCount OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Battery test records number." ::= { hwBattsTest 1 } hwSetBattsManuStdTestTime OBJECT-TYPE SYNTAX Unsigned32 (1..6000) MAX-ACCESS read-write STATUS current DESCRIPTION "Battery standard test time, It can be configured by users, value range defines between 1 to 6000, units: minutes(min). and its value is an integer (1). Here, if battery manual test is standard mode, If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwBattsTest 2 } hwSetBattsManuStdTestEndVolt OBJECT-TYPE SYNTAX Unsigned32 (170..220) MAX-ACCESS read-write STATUS current DESCRIPTION "Test end voltage of single battery, which can be configured by users. value range defines between 1.7 to 2.2 Units: V/cell, and the value is accurate to two decimal place (.01). Here, if battery manual test is standard mode, . If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwBattsTest 3 } hwSetBattsManuStdTestCellNum OBJECT-TYPE SYNTAX Unsigned32 (1..50) MAX-ACCESS read-write STATUS current DESCRIPTION "Battery cell number in each Group, which is used in the battery standard manual test, can be configured by users. Units: psc or cell, value range defines between 1 to 50. and value is an integer (1)." ::= { hwBattsTest 4 } hwSetBattsManuShortTestTime OBJECT-TYPE SYNTAX Unsigned32 (1..240) MAX-ACCESS read-write STATUS current DESCRIPTION "Battery short test time, It can be configured by users, value range defines between 1 to 240, units: minutes(min). and its value is an integer (1). If battery manual test is simple mode, If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwBattsTest 5 } hwSetBattsManuShortTestEndVolt OBJECT-TYPE SYNTAX Unsigned32 (442..530) MAX-ACCESS read-write STATUS current DESCRIPTION "Voltage when the battery short test is ended, can be configured by users. Here, if battery manual test is standard mode, value range defines between 44.2 to 53, Units: V, and the value is accurate to one decimal place (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwBattsTest 6 } hwCtrlBattsTestStartStop OBJECT-TYPE SYNTAX INTEGER { stdTestStart(1), shortTestStart(2), testStop(3), nullOper(255) } MAX-ACCESS read-write STATUS current DESCRIPTION "Battery manualtest start and stop. It is an enumeration value. If the value is 1, it means to start a standard manual test; If the value is 2, it means to start a short manual test; If the value is 3, it means to stop the battery test. If the value is 255, it means null operate(can't set to smu); Set the parameters, such as battery test time, and voltage when the battery test stops before the node controls the start of the battery test. If the parameters are not set this time, the system uses the configuration parameters by default; and if the battery test is started at the first time, the system uses the default value. Battery test can only start up in some conditions, so that the reason of Start of battery short test failed may be as follow: 1. Interval between this test and the latest AC outage or test is longer than the preset duration. 2. No major alarm is raised. 3. The number of healthy modules is greater than 0. 4. The number of battery strings is greater than 0." ::= { hwBattsTest 7 } hwBattsTestResultTable OBJECT-TYPE SYNTAX SEQUENCE OF HwBattsTestResultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Battery test result record table. Use this table to get battery test inital time, test result, battery efficiency, battery discharge time, terminated voltage, average current, discharge AH value, test temperature and test terminated course. This table's index is hwBattsTestResultIndex, clone Battery test result record table." ::= { hwBattsTest 100 } hwBattsTestResultEntry OBJECT-TYPE SYNTAX HwBattsTestResultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Battery test result record table. Use this table to get battery test inital time, test result, battery efficiency, battery discharge time, terminated voltage, average current, discharge AH value, test temperature and test terminated course. This table's index is hwBattsTestResultIndex, clone Battery test result record table." INDEX { hwBattsTestResultIndex } ::= { hwBattsTestResultTable 1 } HwBattsTestResultEntry ::= SEQUENCE { hwBattsTestResultIndex Integer32, hwBattsTestType INTEGER, hwBattsTestStartTime OCTET STRING, hwBattsTestResult INTEGER, hwBattsEfficiency Integer32, hwBattsDischargeTime Unsigned32, hwBattsDischargeEndVoltage Unsigned32, hwBattsDischargeAvCurrent Integer32, hwBattsDischargeAhValue Unsigned32, hwBattsTestTemperature Integer32, hwBattsTestEndCourse INTEGER, hwBattsTestResultRowStatus RowStatus } hwBattsTestResultIndex OBJECT-TYPE SYNTAX Integer32 (1..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Table index of the battery test results. Currently up to 10 times of the battery test results are saved by default. " ::= { hwBattsTestResultEntry 1 } hwBattsTestType OBJECT-TYPE SYNTAX INTEGER { manualTest(1), acOffAutoTest(2), timedTest(3), shortTest(4), unknown(255) } MAX-ACCESS read-only STATUS current DESCRIPTION "Record test type of the battery test. It is an enumeration value: If the NMS notifies the SNMP agent that this node is set to 1, it indicates a manual test; If the NMS notifies the SNMP agent that this node is set to 2, it indicates a simplified test; If the NMS notifies the SNMP agent that this node is set to 3, it indicates a timed test; If the NMS notifies the SNMP agent that this node is set to 4, it indicates a short test; If the NMS notifies the SNMP agent that this node is set to 255, it indicates a other test." ::= { hwBattsTestResultEntry 2 } hwBattsTestStartTime OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..127)) MAX-ACCESS read-only STATUS current DESCRIPTION "Test start time of the record in the battery test. It is of the character string type." ::= { hwBattsTestResultEntry 3 } hwBattsTestResult OBJECT-TYPE SYNTAX INTEGER { battNoResult(1), battNormal(2), battPreAlarm(3), battAlarm(4), unknown(255) } MAX-ACCESS read-only STATUS current DESCRIPTION "Battery test result. It is an enumeration value. If the enumeration value of the node is 1, it indicates that the battery test has no result: If the enumeration value of the node is 2, it indicates that the battery is in the normal state: If the enumeration value of the node is 3, it indicates that the battery is in the minor abnormal state, If the enumeration value of the node is 4, it indicates that the battery is in the alarm state, If the enumeration value of the node is 255, it indicates that the battery state is unknown," ::= { hwBattsTestResultEntry 4 } hwBattsEfficiency OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Battery efficiency test. Value range: 0 to 100, Units: %, and the value is an integer (1). If the value is -1, it indicates that the test value is inefficient. If the value is 255, it indicates that the test value is invalid." ::= { hwBattsTestResultEntry 5 } hwBattsDischargeTime OBJECT-TYPE SYNTAX Unsigned32 (0..10000) MAX-ACCESS read-only STATUS current DESCRIPTION "Discharge time of the battery test records. Value range: 0 to 100, units: hour (h), and the value is accurate to two decimal places (.01). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwBattsTestResultEntry 6 } hwBattsDischargeEndVoltage OBJECT-TYPE SYNTAX Unsigned32 (0..600) MAX-ACCESS read-only STATUS current DESCRIPTION "Discharge termination voltage of the battery test. Value range: 0 to 60, units: V, and the value is accurate to one decimal place (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwBattsTestResultEntry 7 } hwBattsDischargeAvCurrent OBJECT-TYPE SYNTAX Integer32 ( -10000..10000) MAX-ACCESS read-only STATUS current DESCRIPTION "Average discharge current of the battery test. Value range: -1000 to 1000, units: A, and the value is accurate to one decimal place (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwBattsTestResultEntry 8 } hwBattsDischargeAhValue OBJECT-TYPE SYNTAX Unsigned32 (0..5000) MAX-ACCESS read-only STATUS current DESCRIPTION "Discharge ampere per hour the battery test. Value range: 0 to 5000, Units: Ah, and the value is an integer (1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwBattsTestResultEntry 9 } hwBattsTestTemperature OBJECT-TYPE SYNTAX Integer32 ( -50..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Battery temperature of the battery test termination. Value range: -50 to +100, Units: centigrade (degC), and the value is an integer (1). If the value is -1024, it indicates that no battery temperature value sensor is detected." ::= { hwBattsTestResultEntry 10 } hwBattsTestEndCourse OBJECT-TYPE SYNTAX INTEGER { voltageToEnd(1), timeToEnd(2), acOnToEnd(3), manulToEnd(4), faultAlarmToEnd(5), lowCapacityToEnd(6), lowTempToEnd(7), unknown(255) } MAX-ACCESS read-only STATUS current DESCRIPTION "Termination factors of the battery test. It is an enumeration value. If the enumeration value is 1, it indicates that the voltage value of the battery test reaches the set termination voltage; If the enumeration value is 2, it indicates that the voltage value of the battery test reaches the timing limit; If the enumeration value is 3, it indicates that an alarm related to the battery leads to the stop of the battery test; If the enumeration value is 4, it indicates that a battery test is stopped manually, If the enumeration value is 5, it indicates that battery fault alarm happened, If the enumeration value is 6, it indicates that battery low capacity happened, If the enumeration value is 7, it indicates that battery low temp happened, If the enumeration value is 255, it indicates that battery test end for other courses." ::= { hwBattsTestResultEntry 11 } hwBattsTestResultRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus of battery test table." ::= { hwBattsTestResultEntry 100 } hwSetBattsConsCurrTestEnable OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Battery constant current test function enable or disable. It is an enumeration value. If the value is 1, it means the function is disabled; If the value is 2, it means the function is enabled." ::= { hwBattsTest 8 } hwSetBattsConsCurrTestDischCurrent OBJECT-TYPE SYNTAX Unsigned32 (1..9999) MAX-ACCESS read-write STATUS current DESCRIPTION "The battery discharge current in the constant current test. It is an integer value(range:1A~9999A) and the value is accurate to 1A." ::= { hwBattsTest 9 } hwSetBattsTimeTestMode OBJECT-TYPE SYNTAX INTEGER { disable(1),scheduledTest(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Battery constant current test function enable or disable. It is an enumeration value. If the value is 1, it means to disable the timed test of battery; If the value is 3, it means to enable the scheduled test of battery." ::= { hwBattsTest 10 } hwSetBattsScheduledTestPeriod OBJECT-TYPE SYNTAX Unsigned32 (2..999) MAX-ACCESS read-write STATUS current DESCRIPTION "Scheduled Test Period. Value range: 2 to 999, units: Day, and the value is an integer.(1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwBattsTest 11 } hwSetBattsTestEndCapacity OBJECT-TYPE SYNTAX Unsigned32 (0..99) MAX-ACCESS read-write STATUS current DESCRIPTION "Test End Capacity. Value range: 0 to 99, units: %, and the value is an integer. If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwBattsTest 12 } hwSetBattsTestEndTemperature OBJECT-TYPE SYNTAX Integer32 (-5..15) MAX-ACCESS read-write STATUS current DESCRIPTION "Test End Temperature. Value range: -5 to 15, units: degC, and the value is an integer.(1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwBattsTest 13 } hwSetBattsShortTestEnable OBJECT-TYPE SYNTAX INTEGER { disable(1),enable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Battery short test enable. It is an enumeration value, and can be configured. If the enumeration value is 1, it indicates battery short test is disabled; If the enumeration value is 2, it indicates battery short test is enabled. " ::= { hwBattsTest 14 } hwSetBattsShortTestPeriod OBJECT-TYPE SYNTAX Unsigned32 (1..360) MAX-ACCESS read-write STATUS current DESCRIPTION "Short Test Period. Value range: 1 to 360, units: Day, and the value is an integer.(1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwBattsTest 15 } hwBattString OBJECT IDENTIFIER ::= { hwSiteBatterys 4 } hwBattStringConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF HwBattStringConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Battery string config table. Use this table to get battery string equipment ID and equipment name, to set battery standard capacity and battery install time as well. This table's index is hwBattStringConfigIndex, clone battery string config table." ::= { hwBattString 1 } hwBattStringConfigEntry OBJECT-TYPE SYNTAX HwBattStringConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Battery string config table. Use this table to get battery string equipment ID and equipment name, to set battery standard capacity and battery install time as well. This table's index is hwBattStringConfigIndex, clone battery string config table." INDEX { hwBattStringConfigIndex } ::= { hwBattStringConfigTable 1 } HwBattStringConfigEntry ::= SEQUENCE { hwBattStringConfigIndex Integer32, hwBattStringEquipId Unsigned32, hwBattStringEquipName OCTET STRING, hwSetBattsTempUpperLimit Integer32, hwSetBattsTempLowerLimit Integer32, hwSetBattsTempMeasureUpperLimit Integer32, hwSetBattsTempMeasureLowerLimit Integer32, hwSetBattStdCapacity Integer32, hwSetBattInstallTime OCTET STRING, hwBattStringConfigRowStatus RowStatus } hwBattStringConfigIndex OBJECT-TYPE SYNTAX Integer32 (1..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Device table index of the battery string, value range: 1 to 100(To the actual subject)." ::= { hwBattStringConfigEntry 1 } hwBattStringEquipId OBJECT-TYPE SYNTAX Unsigned32 (3001..3100) MAX-ACCESS read-only STATUS current DESCRIPTION "Batteries device ID, can be configured by users. Value range: 003,001 to 003,100, in which the first three digits specify the device type and the last three specify the device SN." ::= { hwBattStringConfigEntry 2 } hwBattStringEquipName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..63)) MAX-ACCESS read-only STATUS current DESCRIPTION "Batteries device name, of the character string type, is used to specify the batteries. Users can configure it. Otherwise, the configured character can not be any other languages except English." ::= { hwBattStringConfigEntry 3 } hwSetBattsTempUpperLimit OBJECT-TYPE SYNTAX Integer32 ( 25..80) MAX-ACCESS read-write STATUS current DESCRIPTION "Upper threshold of the battery temperature alarm, can be configured by users. Value range: 25 to 80, Units: centigrade (degC), and the value is an integer (1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid. NOTE: There is linkage between hwSetBattsHTDLimit and hwSetBattsTempUpperLimit" ::= { hwBattStringConfigEntry 4 } hwSetBattsTempLowerLimit OBJECT-TYPE SYNTAX Integer32 ( -20..20) MAX-ACCESS read-write STATUS current DESCRIPTION "Lower threshold of the battery temperature alarm, can be configured by users. Value range: -20 to 20, Units: centigrade (degC), and the value is an integer (1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwBattStringConfigEntry 5 } hwSetBattsTempMeasureUpperLimit OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "Upper threshold of the battery temperature measurement, can be configured by users. Value range: 0 to 100, Units: centigrade (degC), and the value is an integer (1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwBattStringConfigEntry 6 } hwSetBattsTempMeasureLowerLimit OBJECT-TYPE SYNTAX Integer32 ( -50..0) MAX-ACCESS read-write STATUS current DESCRIPTION "Lower threshold of the battery temperature measurement, can be configured by users. Value range: -50 to 0, Units: centigrade (degC), and the value is an integer (1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwBattStringConfigEntry 7 } hwSetBattStdCapacity OBJECT-TYPE SYNTAX Integer32 (5..10000) MAX-ACCESS read-write STATUS current DESCRIPTION "Set battery standard capacity, is an inherent attribute of the device. Value range: 5 to 10000, units: Ah, the value is an integer (1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwBattStringConfigEntry 8 } hwSetBattInstallTime OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "Set battery install time, of the character string type, can be configured by users. Otherwise, the configured character can not be any other languages except English. " ::= { hwBattStringConfigEntry 9 } hwBattStringConfigRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus of battery string config table." ::= { hwBattStringConfigEntry 100 } hwBattStringOperTable OBJECT-TYPE SYNTAX SEQUENCE OF HwBattStringOperEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Battery string runing table. Use this table to get battery string current, persent of remain capacity, battery remain capacity, battery actual capacity, as well as battery temperature. This table's index is hwBattStringRunIndex, clone battery string runing table." ::= { hwBattString 2 } hwBattStringOperEntry OBJECT-TYPE SYNTAX HwBattStringOperEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Battery string runing table. Use this table to get battery string current, persent of remain capacity, battery remain capacity, battery actual capacity, as well as battery temperature. This table's index is hwBattStringRunIndex, clone battery string runing table." INDEX { hwBattStringOperIndex } ::= { hwBattStringOperTable 1 } HwBattStringOperEntry ::= SEQUENCE { hwBattStringOperIndex Integer32, hwBattStringCurrent Integer32, hwBattStringRemainCapacityPercent Unsigned32, hwBattStringRemainCapacity Unsigned32, hwBattStringActualCapacity Unsigned32, hwBattStringTemprature Integer32, hwBattStringMidpointVoltage Integer32, hwBattStringOperStatus INTEGER, hwBattStringOperRowStatus RowStatus } hwBattStringOperIndex OBJECT-TYPE SYNTAX Integer32 (1..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Device table index of the battery string, which value range: 1 to 100(To the actual subject)." ::= { hwBattStringOperEntry 1 } hwBattStringCurrent OBJECT-TYPE SYNTAX Integer32 ( -10000..10000) MAX-ACCESS read-only STATUS current DESCRIPTION "Batteries current. It is an analog parameter collected by the battery string in real time. Value range: -1000 to +1000, units: A, and the value is accurate to one decimal place (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwBattStringOperEntry 2 } hwBattStringRemainCapacityPercent OBJECT-TYPE SYNTAX Unsigned32 (0..1000) MAX-ACCESS read-only STATUS current DESCRIPTION "Remaining capacity percentage of the battery string. Value range: 0 to 100, units: %, and the value is accurate to one decimal place (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwBattStringOperEntry 3 } hwBattStringRemainCapacity OBJECT-TYPE SYNTAX Unsigned32 (0..1000) MAX-ACCESS read-only STATUS current DESCRIPTION "Remaining capacity of the battery string. It is an analog parameter collected by the battery string in real time. Value range: 0 to 1000, units: Ah, and the value is an integer (1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwBattStringOperEntry 4 } hwBattStringActualCapacity OBJECT-TYPE SYNTAX Unsigned32 (0..5000) MAX-ACCESS read-only STATUS current DESCRIPTION "Batteries actual capacity. It is an analog parameter collected by the battery string in real time. Value range: 0 to 5000, units: Ah, the value is an integer (1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwBattStringOperEntry 5 } hwBattStringTemprature OBJECT-TYPE SYNTAX Integer32 ( -3000..2000) MAX-ACCESS read-only STATUS current DESCRIPTION "Battery temperature. It is a battery parameter collected in real time. Value range: -300 to +200, unit: centigrade (degC), and the value is accurate to one decimal place (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that battery temperature sensor is not configured." ::= { hwBattStringOperEntry 6 } hwBattStringMidpointVoltage OBJECT-TYPE SYNTAX Integer32 ( -900..900) MAX-ACCESS read-only STATUS current DESCRIPTION "Batteries midpoint voltage. It is an analog parameter collected by the battery string in real time. Value range: -90 to +90, unit: V, and the value is accurate to one decimal place (.1)." ::= { hwBattStringOperEntry 7 } hwBattStringOperStatus OBJECT-TYPE SYNTAX INTEGER { normal(1), tempHigh(2), tempLow(3), loopBreak(4), overCurrent(5), unbalance(6), discharge(7), fuseBreak(8), alarmResume(254), unknown(255) } MAX-ACCESS read-only STATUS current DESCRIPTION "State of the site battery string module. It is an enumeration type: If the enumeration value is 1, it indicates that the site battery string is in the normal state; If the enumeration value is 2, it indicates that the battery string is over upper alarm threshold of temperature; If the enumeration value is 3, it indicates that the battery string is under lower alarm threshold of temperature; If the enumeration value is 4, it indicates that battery string loop has disconnected; If the enumeration value is 5, it indicates that the current of batery is over upper charging threshold; If the enumeration value is 6, it indicates that the battery string is unbalance; If the enumeration value is 7, it indicates that battery string is discharge; If the enumeration value is 8, it indicates that battery string is fuseBreak; If the enumeration value is 254, it indicates battery string alarm resume; If the enumeration value is 255, it indicates battery string operation status unknown. " ::= { hwBattStringOperEntry 99 } hwBattStringOperRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus of battery string runing table." ::= { hwBattStringOperEntry 100 } hwSiteAcDistributions OBJECT IDENTIFIER ::= { hwSiteMonitorMIBObjects 5 } hwAcDistributionsGroup OBJECT IDENTIFIER ::= { hwSiteAcDistributions 1 } hwAcsGroupId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "AC group ID, is the unique ID of the AC group. The first three digits indicate the device type and the last three indicate the device SN. If the last three digits are 000, it indicates a virtual device. " ::= { hwAcDistributionsGroup 1 } hwAcsGroupName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..63)) MAX-ACCESS read-write STATUS current DESCRIPTION "Device name of the AC group. It is of the character string type, and can be configured by users. Otherwise, the configured character can not be any other languages except English." ::= { hwAcDistributionsGroup 2 } hwAcsTotalCurrent OBJECT-TYPE SYNTAX Unsigned32 (0..10000) MAX-ACCESS read-only STATUS current DESCRIPTION "Total current of the AC group. It indicates the real-time statistics of the AC group. Value range: 0 to 1000, units: A, and the value is accurate to one decimal place (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwAcDistributionsGroup 3 } hwAcsInputQuantity OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Total quantity of the site ACUs. Value range: 0 to 100. " ::= { hwAcDistributionsGroup 4 } hwSetAcsUpperVoltLimit OBJECT-TYPE SYNTAX Unsigned32 (50..600) MAX-ACCESS read-write STATUS current DESCRIPTION "Upper threshold of the AC voltage alarm, can be configured by users. Value range: 50 to 600, units: V, and the value is an integer (1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid. NOTE: There is linkage between hwSetAcsUpperVoltLimit and hwSetAcsLowerVoltLimit" ::= { hwAcDistributionsGroup 5 } hwSetAcsLowerVoltLimit OBJECT-TYPE SYNTAX Unsigned32 (50..600) MAX-ACCESS read-write STATUS current DESCRIPTION "Lower threshold of the AC voltage alarm, can be configured by users. Value range: 50 to 600, units: V, and the value is an integer (1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid. NOTE: There is linkage between hwSetAcsUpperVoltLimit and hwSetAcsLowerVoltLimit" ::= { hwAcDistributionsGroup 6 } hwAcsPowerConsumption OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Low 32bits of AC Active power Consumption. Value range:0 to 4294967295, resolution 10wh. If GET value is 10, it means the real consumption is 10*10wh = 100wh (0.1kwh)" ::= { hwAcDistributionsGroup 7 } hwAcsReactivePowerConsumption OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Low 32bits of AC Reactive Power Consumption. Value range:0 to 4294967295, resolution 10varh. If GET value is 10, it means the real consumption is 10*10varh = 100varh (0.1kvarh)" ::= { hwAcDistributionsGroup 9 } hwAcsReactivePowerConsumptionHigh32b OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "High 32bits of AC Reactive Power Consumption. Value range:0 to 4294967295, resolution 10varh." ::= { hwAcDistributionsGroup 10 } hwAcsActivePowerConsumptionKw OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "AC Active Power Consumption. Value range:0 to 4294967295, resolution 1kwh." ::= { hwAcDistributionsGroup 11 } hwAcsReactivePowerConsumptionKvar OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "AC Reactive Power Consumption. Value range:0 to 4294967295, resolution 1kwh." ::= { hwAcDistributionsGroup 12 } hwAcsPowerConsumptionHigh32b OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "High 32bits of AC Active Power Consumption. Value range:0 to 4294967295, resolution 10wh." ::= { hwAcDistributionsGroup 8 } hwAcDistribution OBJECT IDENTIFIER ::= { hwSiteAcDistributions 2 } hwAcInputTable OBJECT-TYPE SYNTAX SEQUENCE OF HwAcInputEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "AC input table. Use this table to get AC distribution unit ID, AC distribution unit name, A phase or AB line voltage, B phase or BC line voltage, C phase or CA line voltage, AC input breaker status, as well as AC output breakers quantity, which defines hwAcOutputBreakerTable row number. This table's index is hwAcInputIndex, clone AC input table." ::= { hwAcDistribution 1 } hwAcInputEntry OBJECT-TYPE SYNTAX HwAcInputEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "AC input table. Use this table to get AC distribution unit ID, AC distribution unit name, A phase or AB line voltage, B phase or BC line voltage, C phase or CA line voltage, AC input breaker status, as well as AC output breakers quantity, which defines hwAcOutputBreakerTable row number. This table's index is hwAcInputIndex, clone AC input table." INDEX { hwAcInputIndex } ::= { hwAcInputTable 1 } HwAcInputEntry ::= SEQUENCE { hwAcInputIndex Integer32, hwAcEquipId Unsigned32, hwAcEquipName OCTET STRING, hwApOrAblVoltage Unsigned32, hwBpOrBclVoltage Unsigned32, hwCpOrCalVoltage Unsigned32, hwAphaseCurrent Integer32, hwBphaseCurrent Integer32, hwCphaseCurrent Integer32, hwAcInputBreakersQuantity Unsigned32, hwAcInputOperStatus INTEGER, hwAcRowStatus RowStatus } hwAcInputIndex OBJECT-TYPE SYNTAX Integer32 (1..100) MAX-ACCESS read-only STATUS current DESCRIPTION "ACU device table index, which value range: 1 to 100. Lines of the device list are restricted by the total quantity of ACUs (hwAcsInputQuantity)." ::= { hwAcInputEntry 1 } hwAcEquipId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "ACU device ID, which users can configure. Value range: 004,001 to 004,100, in which The first digits indicate the device type and the last three digits indicate the device SN." ::= { hwAcInputEntry 2 } hwAcEquipName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..63)) MAX-ACCESS read-write STATUS current DESCRIPTION "ACU device name, of the character string type, is used to specify the alternating current unit (ACU). Users can configure it. Otherwise, the configured character can not be any other languages except English." ::= { hwAcInputEntry 3 } hwApOrAblVoltage OBJECT-TYPE SYNTAX Unsigned32 (0..6000) MAX-ACCESS read-only STATUS current DESCRIPTION "ACU A-phase or AB-line voltage. Value range: 0 to 600, units: V, and the value is accurate to one decimal place (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwAcInputEntry 4 } hwBpOrBclVoltage OBJECT-TYPE SYNTAX Unsigned32 (0..6000) MAX-ACCESS read-only STATUS current DESCRIPTION "ACU B-phase or BC-line voltage. Value range: 0 to 600, units: V, and the value is accurate to one decimal place (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwAcInputEntry 5 } hwCpOrCalVoltage OBJECT-TYPE SYNTAX Unsigned32 (0..6000) MAX-ACCESS read-only STATUS current DESCRIPTION "ACU C-phase or CA-line voltage. Value range: 0 to 600, units: V, and the value is accurate to one decimal place (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwAcInputEntry 6 } hwAphaseCurrent OBJECT-TYPE SYNTAX Integer32 (0..200000) MAX-ACCESS read-only STATUS current DESCRIPTION "ACU A-phase current. It is an analog parameter collected by the ACU in real time. Value range: 0 to 20000, units: A, and the value is accurate to one decimal place (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwAcInputEntry 7 } hwBphaseCurrent OBJECT-TYPE SYNTAX Integer32 (0..200000) MAX-ACCESS read-only STATUS current DESCRIPTION "ACU B-phase current. It is an analog parameter collected by the ACU in real time. Value range: 0 to 20000, units: A, and the value is accurate to one decimal place (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwAcInputEntry 8 } hwCphaseCurrent OBJECT-TYPE SYNTAX Integer32 (0..200000) MAX-ACCESS read-only STATUS current DESCRIPTION "ACU C-phase current. It is an analog parameter collected by the ACU in real time. Value range: 0 to 20000, units: A, and the value is accurate to one decimal place (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwAcInputEntry 9 } hwAcInputBreakersQuantity OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Quantity of the AC air circuit breakers. As the ACU lower-level subset, the node indicates the quantity of the output air circuit breakers contained by each ACU lower-level subset. Value range: 0 to 100. " ::= { hwAcInputEntry 10 } hwAcInputOperStatus OBJECT-TYPE SYNTAX INTEGER { normal(1), acOff(2), acAbsent(3), voltHigh(4), voltLow(5), freqHigh(6), freqLow(7), alarmResume(254), unknown(255) } MAX-ACCESS read-only STATUS current DESCRIPTION "State of the site AC distribution uint. It is an enumeration type: If the enumeration value is 1, it indicates that the site AC distribution uint is in the normal state; If the enumeration value is 2, it indicates that AC distribution uint power off; If the enumeration value is 3, it indicates that AC input phase absent; If the enumeration value is 4, it indicates that AC voltage is over upper alarm threshold; If the enumeration value is 5, it indicates that AC voltage is under lower alarm threshold; If the enumeration value is 6, it indicates that AC voltage is freqHigh; If the enumeration value is 7, it indicates that AC voltage is freqLow; If the enumeration value is 254, it indicates AC distribution uint alarm resume; If the enumeration value is 255, it indicates AC distribution uint operation status unknown. " ::= { hwAcInputEntry 99 } hwAcRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus of ACU." ::= { hwAcInputEntry 100 } hwAcInputBreakerTable OBJECT-TYPE SYNTAX SEQUENCE OF HwAcInputBreakerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Ac input breaker table. Use this table to get AC input breaker equipment ID, AC input breaker equipment name, and AC input breaker status. This table's index is hwAcInputBreakerIndex, which qualificated by hwAcInputBreakersQuantity in hwAcInputTable, clone Ac input breaker table." ::= { hwAcDistribution 2 } hwAcInputBreakerEntry OBJECT-TYPE SYNTAX HwAcInputBreakerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Ac input breaker table. Use this table to get AC input breaker equipment ID, AC input breaker equipment name, and AC input breaker status. This table's index is hwAcInputBreakerIndex, which qualificated by hwAcInputBreakersQuantity in hwAcInputTable, clone Ac input breaker table." INDEX { hwAcInputBreakerIndex } ::= { hwAcInputBreakerTable 1 } HwAcInputBreakerEntry ::= SEQUENCE { hwAcInputBreakerIndex Integer32, hwAcInputBreakerEquipId Unsigned32, hwAcInputBreakerEquipName OCTET STRING, hwAcInputBreakerOperStatus INTEGER, hwAcInputBreakerRowStatus RowStatus } hwAcInputBreakerIndex OBJECT-TYPE SYNTAX Integer32 (1..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Device table index of the AC air circuit breaker. Value range: 1 to 100. An input air circuit breaker device can be uniquely identified through the ACU table index and device index of the AC air circuit breaker. " ::= { hwAcInputBreakerEntry 1 } hwAcInputBreakerEquipId OBJECT-TYPE SYNTAX Unsigned32 (5001..5100) MAX-ACCESS read-only STATUS current DESCRIPTION "AC input air circuit breaker ID. Value range: 005,001 to 005,100. The first digits indicate the device type and the last three digits indicate the device SN." ::= { hwAcInputBreakerEntry 2 } hwAcInputBreakerEquipName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..63)) MAX-ACCESS read-write STATUS current DESCRIPTION "AC input air circuit breaker name, of the character string type, can configured by users. Otherwise, the configured character can not be any other languages except English." ::= { hwAcInputBreakerEntry 3 } hwAcInputBreakerOperStatus OBJECT-TYPE SYNTAX INTEGER { normal(1), disconnect(2), alarmResume(254), unknown(255) } MAX-ACCESS read-only STATUS current DESCRIPTION "Operation state of the site AC input breaker. It is an enumeration type: If the enumeration value is 1, it indicates that the site AC input breaker is in the normal state; If the enumeration value is 2, it indicates that the AC input breaker disconnect; If the enumeration value is 254, it indicates AC input breaker alarm resume; If the enumeration value is 255, it indicates AC input breaker operation status unknown. " ::= { hwAcInputBreakerEntry 99 } hwAcInputBreakerRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus of AC input breaker." ::= { hwAcInputBreakerEntry 100 } hwSiteDcDistributions OBJECT IDENTIFIER ::= { hwSiteMonitorMIBObjects 6 } hwDcDistributionsGroup OBJECT IDENTIFIER ::= { hwSiteDcDistributions 1 } hwDcsGroupId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "DC group ID: unique ID of the DC group. in which The first digits indicate the device type and the last three digits indicate the device SN. If the last three digits are 000, it indicates a virtual device." ::= { hwDcDistributionsGroup 1 } hwDcsGroupName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..63)) MAX-ACCESS read-write STATUS current DESCRIPTION "Device name of the DC group, of the character string type, can be configured by users. Otherwise, the configured character can not be any other languages except English." ::= { hwDcDistributionsGroup 2 } hwDcsTotalVoltage OBJECT-TYPE SYNTAX Unsigned32 (0..1000) MAX-ACCESS read-only STATUS current DESCRIPTION "Total voltage of the DC group. Value range: 0 to 100, units: V, and the value is accurate to one decimal place (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwDcDistributionsGroup 3 } hwDcsTotalCurrent OBJECT-TYPE SYNTAX Integer32 ( -300000..300000) MAX-ACCESS read-only STATUS current DESCRIPTION "Total current of the DC group. Value range: -30000 to 30000, units: A, and the value is accurate to one decimal place (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwDcDistributionsGroup 4 } hwDcsTotalPower OBJECT-TYPE SYNTAX Unsigned32 (0..3000000) MAX-ACCESS read-only STATUS current DESCRIPTION "Total power of the DC group. Value range: 0 to 3000000, units: W, and the value is an integer (1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwDcDistributionsGroup 5 } hwDcsTotalQuantity OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Total quantity of the DC units, and its Value range: 0 to 100." ::= { hwDcDistributionsGroup 6 } hwSetDcsUpperVoltLimit OBJECT-TYPE SYNTAX Unsigned32 (530..600) MAX-ACCESS read-write STATUS current DESCRIPTION "Upper threshold of the DC voltage alarm, can be configued by users. Value range: 53 to 60, units: V, and the value is accurate to one decimal space (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid. NOTE: There is linkage between hwSetDcsUpperVoltLimit and hwSetDcsLowerVoltLimit" ::= { hwDcDistributionsGroup 7 } hwSetDcsLowerVoltLimit OBJECT-TYPE SYNTAX Unsigned32 (350..570) MAX-ACCESS read-write STATUS current DESCRIPTION "Lower threshold of the DC voltage alarm, can be configued by users. Value range: 35 to 57, units: V, and the value is accurate to one decimal space (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid. NOTE: There is linkage between hwSetDcsUpperVoltLimit and hwSetDcsLowerVoltLimit" ::= { hwDcDistributionsGroup 8 } hwDcsPerfoLoadConsume OBJECT-TYPE SYNTAX Unsigned32 (0..429467295) MAX-ACCESS read-only STATUS current DESCRIPTION "PerfoLoad Consume of the DC, Value range: 0 to 429467295, units: KWh, and the value is an integer (1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwDcDistributionsGroup 9 } hwDcsLoadConsumptionLow32b OBJECT-TYPE SYNTAX Unsigned32 (0..429467295) MAX-ACCESS read-only STATUS current DESCRIPTION "Low 32bits of total DC Load Consumption,Value range: 0 to 429467295, resolution 10wh. If GET value is 10, it means the real consumption is 10*10wh = 100wh (0.1kwh)" ::= { hwDcDistributionsGroup 12 } hwDcsLoadConsumptionHigh32b OBJECT-TYPE SYNTAX Unsigned32 (0..429467295) MAX-ACCESS read-only STATUS current DESCRIPTION "High 32bits of total DC Load Consumption,Value range: 0 to 429467295, resolution 10wh." ::= { hwDcDistributionsGroup 13 } hwDcDistribution OBJECT IDENTIFIER ::= { hwSiteDcDistributions 2 } hwDcOutputTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDcOutputEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "/" ::= { hwDcDistribution 1 } hwDcOutputEntry OBJECT-TYPE SYNTAX HwDcOutputEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "/" INDEX { hwDcOutputIndex } ::= { hwDcOutputTable 1 } HwDcOutputEntry ::= SEQUENCE { hwDcOutputIndex Integer32, hwDcOutputEquipId Unsigned32, hwDcOutputEquipName OCTET STRING, hwDcOutputVoltage Unsigned32, hwDcOutputCurrent Integer32, hwDcOutputPower Unsigned32, hwLoadsQuantity Unsigned32, hwLoadUsage Unsigned32, hwDcOutputOperStatus INTEGER, hwDcOutputRowStatus RowStatus } hwDcOutputIndex OBJECT-TYPE SYNTAX Integer32 (1..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Device table index of the DC units, which value range: 1 to 100. Lines of the device list are restricted by the total quantity of DC units (hwDcsQuantity)." ::= { hwDcOutputEntry 1 } hwDcOutputEquipId OBJECT-TYPE SYNTAX Unsigned32 (6001..6100) MAX-ACCESS read-only STATUS current DESCRIPTION "DC unit device ID, which value range: 006,001 to 006,100. The first digits indicate the device type and the last three digits indicate the device SN. " ::= { hwDcOutputEntry 2 } hwDcOutputEquipName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..63)) MAX-ACCESS read-write STATUS current DESCRIPTION "DC unit device name, of the character string type, can be configued by users. Otherwise, the configured character can not be any other languages except English." ::= { hwDcOutputEntry 3 } hwDcOutputVoltage OBJECT-TYPE SYNTAX Unsigned32 (0..1000) MAX-ACCESS read-only STATUS current DESCRIPTION "DC output voltage. It is an analog parameter collected by the DC power in real time. Value range: 0 to 100, units: V, and the value is accurate to one decimal space (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwDcOutputEntry 4 } hwDcOutputCurrent OBJECT-TYPE SYNTAX Integer32 ( -300000..300000) MAX-ACCESS read-only STATUS current DESCRIPTION "DC output current. It is an analog parameter collected by the DC power in real time. Value range: -30000 to 30000, units: A, and the value is accurate to one decimal space (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwDcOutputEntry 5 } hwDcOutputPower OBJECT-TYPE SYNTAX Unsigned32 (0..3000000) MAX-ACCESS read-only STATUS current DESCRIPTION "DC output power. It is an analog parameter collected by the DC power in real time. Value range: 0 to 3000000, units: W, and the value is an integer (1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwDcOutputEntry 6 } hwLoadsQuantity OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Quantity of the DC load output branches, which value range: 0 to 100. As the DC unit lower-level subset, the node indicates the quantity of the DC load output branches contained by each DC unit lower-level subset." ::= { hwDcOutputEntry 7 } hwLoadUsage OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "The load usage of rated rectifier capacity. Value range: 0 to 100, units: %, and the value is an integer (1)." ::= { hwDcOutputEntry 8 } hwDcOutputOperStatus OBJECT-TYPE SYNTAX INTEGER { normal(1), voltHigh(2), voltLow(3), dcAbsent(4), overload(5), alarmResume(254), unknown(255) } MAX-ACCESS read-only STATUS current DESCRIPTION "State of the site DC distribution uint. It is an enumeration type: If the enumeration value is 1, it indicates that the site DC distribution uint is in the normal state; If the enumeration value is 2, it indicates that DC voltage is over the upper alarm threshold; If the enumeration value is 3, it indicates that DC voltage is under the lower alarm threshold; If the enumeration value is 4, it indicates that DC voltage is dcAbsent; If the enumeration value is 5, it indicates that DC voltage is overload; If the enumeration value is 254, it indicates DC distribution uint alarm resume; If the enumeration value is 255, it indicates DC distribution uint operation status unknown. " ::= { hwDcOutputEntry 99 } hwDcOutputRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus of Dc output equipments." ::= { hwDcOutputEntry 100 } hwLoadBranchTable OBJECT-TYPE SYNTAX SEQUENCE OF HwLoadBranchEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Loads output table. Use this table to get load branch equipment ID, load branch equipment name, load branch current, and load branch power. This table's index is hwLoadBranchIndex, which qualificated by hwloadsQuantity in hwDcOutputTable, clone loads output table." ::= { hwDcDistribution 2 } hwLoadBranchEntry OBJECT-TYPE SYNTAX HwLoadBranchEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Loads output table. Use this table to get load branch equipment ID, load branch equipment name, load branch current, and load branch power. This table's index is hwLoadBranchIndex, which qualificated by hwloadsQuantity in hwDcOutputTable, clone loads output table." INDEX { hwLoadBranchIndex } ::= { hwLoadBranchTable 1 } HwLoadBranchEntry ::= SEQUENCE { hwLoadBranchIndex Integer32, hwLoadBranchEquipId Unsigned32, hwLoadBranchEquipName OCTET STRING, hwLoadBranchCurrent Integer32, hwLoadBranchPower Unsigned32, hwLoadBranchOperStatus INTEGER, hwLoadBranchRowStatus RowStatus, hwLoadBranchConsume Unsigned32, hwLoadBranchConsumption Unsigned32, hwLoadBranchConsumptionLow32b Unsigned32, hwLoadBranchConsumptionHigh32b Unsigned32 } hwLoadBranchIndex OBJECT-TYPE SYNTAX Integer32 (1..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Device table index of the DC load output branch, which value range: 1 to 100. A DC load output branch can be uniquely identified through the DC unit table index and device index of the DC load output branch." ::= { hwLoadBranchEntry 1 } hwLoadBranchEquipId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Device ID of the DC load output branch. Value range: 007,001 to 007,100. The first digits indicate the device type and the last three digits indicate the SN of the device. " ::= { hwLoadBranchEntry 2 } hwLoadBranchEquipName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..63)) MAX-ACCESS read-write STATUS current DESCRIPTION "Device name of the DC load output branch, of the character string type, can be configured by users. Otherwise, the configured character can not be any other languages except English." ::= { hwLoadBranchEntry 3 } hwLoadBranchCurrent OBJECT-TYPE SYNTAX Integer32 (0..100000) MAX-ACCESS read-only STATUS current DESCRIPTION "DC load output branch current. It is an analog parameter collected by the load branch in real time. Value range: 0 to 10000, units: A, and the value is accurate to one decimal space (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwLoadBranchEntry 4 } hwLoadBranchPower OBJECT-TYPE SYNTAX Unsigned32 (0..600000) MAX-ACCESS read-only STATUS current DESCRIPTION "DC load branch power. It is an analog parameter collected by the DC power in real time. Value range: 0 to 600000, units: W, and the value is an integer (1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwLoadBranchEntry 5 } hwLoadBranchOperStatus OBJECT-TYPE SYNTAX INTEGER { normal(1), disconnect(2), noresponse(3), overload(4), alarmResume(254), unknown(255) } MAX-ACCESS read-only STATUS current DESCRIPTION "State of the site load output branch. It is an enumeration type: If the enumeration value is 1, it indicates that the site load output branch is in the normal state; If the enumeration value is 2, it indicates that the load output branch disconnect; If the enumeration value is 3, it indicates that the site load output branch is in noresponse state; If the enumeration value is 2, it indicates that the site load output branch is in the overload state; If the enumeration value is 254, it indicates load output branch alarm resume; If the enumeration value is 255, it indicates load output branch operation status unknown. " ::= { hwLoadBranchEntry 99 } hwLoadBranchRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus of loads output branch." ::= { hwLoadBranchEntry 100 } hwLoadBranchConsume OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "DC load branch power consumption, Value range: 0 to 4294967295, units: KWh, and the value is accurate to one decimal space (.1)." ::= { hwLoadBranchEntry 6 } hwLoadBranchConsumption OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "DC load branch power consumption,Value range: 0 to 4294967295, resolution:1 KWh." ::= { hwLoadBranchEntry 8 } hwLoadBranchConsumptionLow32b OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Low 32 bits of DC load branch power consumption,Value range: 0 to 4294967295, resolution:10Wh" ::= { hwLoadBranchEntry 9 } hwLoadBranchConsumptionHigh32b OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "High 32 bits of DC load branch power consumption,Value range: 0 to 4294967295, resolution:10Wh" ::= { hwLoadBranchEntry 10 } hwLvdUnits OBJECT IDENTIFIER ::= { hwSiteMonitorMIBObjects 7 } hwLvdsGroup OBJECT IDENTIFIER ::= { hwLvdUnits 1 } hwLvdsGroupId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "LVD unit group ID. It is the unique ID of the LVD unit group. The first digits indicate the device type. The last three digits indicate the device SN. If the last three digits are 000, it indicates a virtual device." ::= { hwLvdsGroup 1 } hwLvdsGroupName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..63)) MAX-ACCESS read-write STATUS current DESCRIPTION "Low-voltage power-off unit group name, of the character string type, can be configured by users. Otherwise, the configured character can not be any other languages except English." ::= { hwLvdsGroup 2 } hwLvdsTotalQuantity OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Total quantity of power-off units. Value range: 0 to 100." ::= { hwLvdsGroup 3 } hwLvdUnit OBJECT IDENTIFIER ::= { hwLvdUnits 2 } hwLvdBranchTable OBJECT-TYPE SYNTAX SEQUENCE OF HwLvdBranchEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Power-off unit table. Use this table to get Lvd unit equipment ID and power-off unit equipment name, set power-off enable and power-off voltage, as well as control power-off unit disconnected. This table's index is hwLvdBranchIndex, which qualificated by hwLvdsQuantity, clone power-off unit table." ::= { hwLvdUnit 1 } hwLvdBranchEntry OBJECT-TYPE SYNTAX HwLvdBranchEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Power-off unit table. Use this table to get Lvd unit equipment ID and power-off unit equipment name, set power-off enable and power-off voltage, as well as control power-off unit disconnected. This table's index is hwLvdBranchIndex, which qualificated by hwLvdsQuantity, clone power-off unit table." INDEX { hwLvdBranchIndex } ::= { hwLvdBranchTable 1 } HwLvdBranchEntry ::= SEQUENCE { hwLvdBranchIndex Integer32, hwLvdUnitEquipId Unsigned32, hwLvdUnitEquipName OCTET STRING, hwSetLvdEnable INTEGER, hwSetLvdVoltage Integer32, hwCtrlLvd INTEGER, hwSetLvdMode INTEGER, hwSetLvdReconnectedVoltage Integer32, hwSetLvdDisconnectedTime Integer32, hwSetLvdDisconnectedCapacity Integer32, hwLvdBranchOperStatus INTEGER, hwLvdBranchRowStatus RowStatus } hwLvdBranchIndex OBJECT-TYPE SYNTAX Integer32 (1..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Device table index of a power-off unit. Value range: 1 to 100. Lines of the device list are restricted by the total quantity of the power-off units (hwLvdsTotalQuantity). " ::= { hwLvdBranchEntry 1 } hwLvdUnitEquipId OBJECT-TYPE SYNTAX Unsigned32 (8001..8100) MAX-ACCESS read-only STATUS current DESCRIPTION "Device ID of a power-off unit. Value range: 8001 to 8100. The first digits indicate the device type and the last three digits indicate the device SN. " ::= { hwLvdBranchEntry 2 } hwLvdUnitEquipName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..63)) MAX-ACCESS read-only STATUS current DESCRIPTION "Device name of a power-off unit, of the character string type, is used to specify the low-voltage power-off unit. Users can configure it. Otherwise, the configured character can not be any other languages except English. " ::= { hwLvdBranchEntry 3 } hwSetLvdEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Control power-off unit enabling. It is an enumeration value, and users actively set it. If the enumeration value is 1, it means to enable the power-off unit; If the enumeration value is 2, it means to disable the power-off unit. When the power-off unit control is not configured, the power-off unit is enabled by default." ::= { hwLvdBranchEntry 4 } hwSetLvdVoltage OBJECT-TYPE SYNTAX Integer32 (350..560) MAX-ACCESS read-write STATUS current DESCRIPTION "Low-voltage power-off voltage of a power-off unit can be configured by users. Its value range: 35 to 56, units: V, and the value is accurate to one decimal space (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid. NOTE: There is linkage between hwSetLvdVoltage and hwSetLvdReconnectedVoltage" ::= { hwLvdBranchEntry 5 } hwCtrlLvd OBJECT-TYPE SYNTAX INTEGER { powerOff(1), powerOn(2), nullOper(255) } MAX-ACCESS read-write STATUS current DESCRIPTION "Control of the power-off unit. It is an enumeration value, users control it manually. If the NMS notifies the SNMP agent that the node is set to 1, it means to power off the power-off unit; If the NMS notifies the SNMP agent that the node is set to 2, it means that the background controls the power-on of the LVD unit. If the NMS notifies the SNMP agent that the node is set to 255, it means that the background controls the nulloper of the LVD unit. NOTE: Only the system in manual mode, this parameter can be configured successfully. " ::= { hwLvdBranchEntry 6 } hwSetLvdMode OBJECT-TYPE SYNTAX INTEGER { byVoltage(1), byTime(2), byCapacity(3), unknown(255) } MAX-ACCESS read-write STATUS current DESCRIPTION "Select the control mode of the power-off unit. It is an enumeration value, users can configure it manually. If the NMS notifies the SNMP agent that the node is set to 1, it means to select the voltage power off mode; If the NMS notifies the SNMP agent that the node is set to 2, it means to select the time power off mode; If the NMS notifies the SNMP agent that the node is set to 3, it means to select the capacity power off mode; If the NMS notifies the SNMP agent that the node is set to 255, it means to select the capacity power unknown mode;" ::= { hwLvdBranchEntry 7 } hwSetLvdReconnectedVoltage OBJECT-TYPE SYNTAX Integer32 (370..580) MAX-ACCESS read-write STATUS current DESCRIPTION "Low-voltage power-off recover of a power-off unit can be configured by users. Its value range: 37.0 to 58.0, unit: V, and the value is accurate to one decimal space (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid. The default value is 51.5 NOTE: There is linkage between hwSetLvdVoltage and hwSetLvdReconnectedVoltage" ::= { hwLvdBranchEntry 8 } hwSetLvdDisconnectedTime OBJECT-TYPE SYNTAX Integer32 (5..1000) MAX-ACCESS read-write STATUS current DESCRIPTION "Low-voltage power-off disconnected time, It can be configured by users, value range defines between 5 to 1000, unit: minutes(min) £¬ and its value is an integer (1). Here, if battery manual test is standard mode, If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid. NOTE: Only the lvd in time power off mode, this parameter can be configured successfully." ::= { hwLvdBranchEntry 9 } hwSetLvdDisconnectedCapacity OBJECT-TYPE SYNTAX Integer32 (0..1000) MAX-ACCESS read-write STATUS current DESCRIPTION "Power-off unit control the power off, when Remaining capacity percentage of the battery strings is below the calue. Value range: 0 to 100, unit: %, and the value is accurate to one decimal space (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid. NOTE: Only the lvd in capacity power off mode, this parameter can be configured successfully." ::= { hwLvdBranchEntry 10 } hwLvdBranchOperStatus OBJECT-TYPE SYNTAX INTEGER { normal(1), lowVoltOff(2), backgroundOff(3), localManualOff(4), lowTempOff(5), highTempOff(6), timeOff(7), capacityOff(8), forceOff(9), maintenanceOff(10), alarmResume(254), unknown(255) } MAX-ACCESS read-only STATUS current DESCRIPTION "State of the site LVD uint. It is an enumeration type: If the enumeration value is 1, the site LVD uint is in the normal state; If the enumeration value is 2, the power-off uint disconnect for low voltage; If the enumeration value is 3, the power-off uint disconnect bakeground; If the enumeration value is 4, the power-off uint local disconnect manually; If the enumeration value is 5, the power-off uint disconnect for under temperature; If the enumeration value is 6, the power-off uint disconnect for over temperature; If the enumeration value is 7, the ower-off uint disconnect for time; If the enumeration value is 8, the power-off uint disconnect for capacity; If the enumeration value is 9, the power-off uint disconnect for force; If the enumeration value is 10, the power-off uint disconnect for maintenance; If the enumeration value is 254, the power-off uint alarm resume; If the enumeration value is 255, it indicates LVD uint operation status unknown. " ::= { hwLvdBranchEntry 99 } hwLvdBranchRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus of lvd table." ::= { hwLvdBranchEntry 100 } hwSiteEnvUnits OBJECT IDENTIFIER ::= { hwSiteMonitorMIBObjects 8 } hwEnvUnitsGroup OBJECT IDENTIFIER ::= { hwSiteEnvUnits 1 } hwEnvUnitsGroupId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Unit group ID of the site environment. It is the unique ID of the unit group on the site. The first digits indicate the device type. The last three digits indicate the device SN. If the last three digits are 000, it indicates a virtual device. " ::= { hwEnvUnitsGroup 1 } hwEnvUnitsGroupName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..63)) MAX-ACCESS read-write STATUS current DESCRIPTION "Unit group name of the site environment, of the character string type, can be configured by users. Otherwise, the configured character can not be any other languages except English." ::= { hwEnvUnitsGroup 2 } hwCtrlSmokeReset OBJECT-TYPE SYNTAX INTEGER { normal(1), reset(2), nullOper(255) } MAX-ACCESS read-write STATUS current DESCRIPTION "Smoke sensor reset. It manually controls clearance of the smoke sensor alarm, and this node is of the enumeration type. If the enumeration value of the node is 1, it indicates that the reset of the smoke sensor is not required. If the enumeration value of the node is 2, it indicates that the background controls the reset of the smoke sensor. If the enumeration value of the node is 255, it indicates that the background controls the unknown of the smoke sensor. " ::= { hwEnvUnitsGroup 3 } hwCtrlDoorReset OBJECT-TYPE SYNTAX INTEGER { normal(1), reset(2), nullOper(255) } MAX-ACCESS read-write STATUS current DESCRIPTION "Door actuator reset control. It manually controls clearance of the door actuator alarm. This node is of the enumeration type. If the enumeration value is 1, it indicates that clearance of the door actuator is not required; If the enumeration value is 2, it indicates that the background controls clearance of the door actuator. If the enumeration value is 255, it indicates that the background controls nulloper of the door actuator. " ::= { hwEnvUnitsGroup 4 } hwCtrlBuzzerEnable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2), nullOper(255) } MAX-ACCESS read-write STATUS current DESCRIPTION "Buzzer enabling. It manually controls the enabling of the buzzer alarm. This node is of the enumeration type. When the enumeration value is 1, it means to enable the buzzer; When the enumeration value is 2, it means to disable the buzzer. When the enumeration value is 255, it means to nulloper the buzzer. " ::= { hwEnvUnitsGroup 5 } hwEnvTempSensorsTotalQuantity OBJECT-TYPE SYNTAX Unsigned32 (0..256) MAX-ACCESS read-only STATUS current DESCRIPTION "Quantity of the environment temperature sensors, and its value range: 0 to 256." ::= { hwEnvUnitsGroup 6 } hwEnvHumiSensorsTotalQuantity OBJECT-TYPE SYNTAX Unsigned32 (0..256) MAX-ACCESS read-only STATUS current DESCRIPTION "Quantity of the environment humidity sensors, and its value range: 0 to 256." ::= { hwEnvUnitsGroup 7 } hwSpareDigitalsTotalQuantity OBJECT-TYPE SYNTAX Unsigned32 (0..256) MAX-ACCESS read-only STATUS current DESCRIPTION "Quantity of the Spare digitals, and its value range: 0 to 256." ::= { hwEnvUnitsGroup 8 } hwSpareDigitalsOutputQuantity OBJECT-TYPE SYNTAX Unsigned32 (0..256) MAX-ACCESS read-only STATUS current DESCRIPTION "Quantity of the Spare digitals Output, and its value range: 0 to 256." ::= { hwEnvUnitsGroup 9 } hwEnvSensor OBJECT IDENTIFIER ::= { hwSiteEnvUnits 2 } hwEnvTempSensorTable OBJECT-TYPE SYNTAX SEQUENCE OF HwEnvTempSensorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Site environment temperature table. Use this table to get environment temperature equipment ID, environment temperature equipment name, and environment temperature, set environment temperature upper limit, environment temperature lower limit, and environment temperature alarm enable. This table's index is hwEnvTempSensorIndex, which qualificated by hwEnvTempSensorsQuantity, clone site environment temperature table." ::= { hwEnvSensor 1 } hwEnvTempSensorEntry OBJECT-TYPE SYNTAX HwEnvTempSensorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Site environment temperature table. Use this table to get environment temperature equipment ID, environment temperature equipment name, and environment temperature, set environment temperature upper limit, environment temperature lower limit, and environment temperature alarm enable. This table's index is hwEnvTempSensorIndex, which qualificated by hwEnvTempSensorsQuantity, clone site environment temperature table." INDEX { hwEnvTempSensorIndex } ::= { hwEnvTempSensorTable 1 } HwEnvTempSensorEntry ::= SEQUENCE { hwEnvTempSensorIndex Integer32, hwEnvTempEquipId Unsigned32, hwEnvTempEquipName OCTET STRING, hwEnvTemperature Integer32, hwSetEnvTempUpperLimit Integer32, hwSetEnvTempLowerLimit Integer32, hwSetEnvTempMeasureUpperLimit Integer32, hwSetEnvTempMeasureLowerLimit Integer32, hwSetEnvTempAlarmEnable INTEGER, hwSetEnvTempUltraHighTempThreshold Unsigned32, hwEnvTempSensorOperStatus INTEGER, hwEnvTempSensorRowStatus RowStatus } hwEnvTempSensorIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Table index of the environment temperature sensors." ::= { hwEnvTempSensorEntry 1 } hwEnvTempEquipId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Environment temperature sensor ID." ::= { hwEnvTempSensorEntry 2 } hwEnvTempEquipName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..63)) MAX-ACCESS read-write STATUS current DESCRIPTION "Environment temperature sensor name, of the character string type, is used to specify an environment temperature sensor. Users can configure it. Otherwise, the configured character can not be any other languages except English. " ::= { hwEnvTempSensorEntry 3 } hwEnvTemperature OBJECT-TYPE SYNTAX Integer32 ( -50..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Environment temperature. It is an environment parameter collected in real time. Value range: -50 to +100, units: centigrade (degC), and the value is an integer (1). If the value is 2147483647, it indicates that the temperature sensor is not configured." ::= { hwEnvTempSensorEntry 4 } hwSetEnvTempUpperLimit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Upper threshold of the environment temperature alarm, can be configured by users. units: centigrade (degC), and the value is an integer (1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid. NOTE: There is linkage between hwSetEnvTempUpperLimit and hwSetEnvTempLowerLimit. If the result of the setting returns an error, it means that it is not supported." ::= { hwEnvTempSensorEntry 5 } hwSetEnvTempLowerLimit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Lower threshold of the environment temperature alarm, can be configured by users. units: centigrade (degC), and the value is an integer (1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid. NOTE: There is linkage between hwSetEnvTempUpperLimit and hwSetEnvTempLowerLimit. If the result of the setting returns an error, it means that it is not supported." ::= { hwEnvTempSensorEntry 6 } hwSetEnvTempMeasureUpperLimit OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "Upper threshold of the environment temperature measurement, can be configured by users. Value range: 0 to 100, unit: centigrade (degC), and the value is an integer (1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwEnvTempSensorEntry 7 } hwSetEnvTempMeasureLowerLimit OBJECT-TYPE SYNTAX Integer32 ( -50..0) MAX-ACCESS read-write STATUS current DESCRIPTION "Lower threshold of the environment temperature measurement, can be configured by users. Value range: -50 to 0, unit: centigrade (degC), and the value is an integer (1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwEnvTempSensorEntry 8 } hwSetEnvTempAlarmEnable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Environment temperature alarm. It is an enumeration type: If the enumeration value is 1, enable the alarm of the environment temperature; If the enumeration value is 2, disable the alarm of the environment temperature. " ::= { hwEnvTempSensorEntry 9 } hwSetEnvTempUltraHighTempThreshold OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Threshold of the environment ultra high temperature measurement, can be configured by users. unit: centigrade (degC), and the value is an integer (1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid. If the result of the setting returns an error, it means that it is not supported. " ::= { hwEnvTempSensorEntry 10 } hwEnvTempSensorOperStatus OBJECT-TYPE SYNTAX INTEGER { normal(1), tempHigh(2), tempLow(3), notInslot(4), alarmResume(254), unknown(255) } MAX-ACCESS read-only STATUS current DESCRIPTION "State of the site environment temperature sensor. It is an enumeration type: If the enumeration value is 1, it indicates that the site environment temperature sensor is in the normal state; If the enumeration value is 2, it indicates that the environment temperature sensor is over temperature; If the enumeration value is 3, it indicates that the environment temperature sensor is under temperature; If the enumeration value is 4, it indicates that the environment temperature sensor is not in slot; If the enumeration value is 254, it indicates that environment temperature alarm resume; If the enumeration value is 255, it indicates environment temperature sensor operation status unknown. " ::= { hwEnvTempSensorEntry 99 } hwEnvTempSensorRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus of Environment temperature table." ::= { hwEnvTempSensorEntry 100 } hwEnvHumiSensorTable OBJECT-TYPE SYNTAX SEQUENCE OF HwEnvHumiSensorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Environment humidity table. Use this table to get environment humidity equipment ID , environment humidity equipment name, and environment humidity, set environment humidity upper limit, environment humidity lower limit, and environment humidity alarm enable. This table's index is hwEnvHumiSensorIndex, which qualificated by hwEnvHumiSensorIndex, clone site environment humidity table." ::= { hwEnvSensor 2 } hwEnvHumiSensorEntry OBJECT-TYPE SYNTAX HwEnvHumiSensorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Environment humidity table. Use this table to get environment humidity equipment ID , environment humidity equipment name, and environment humidity, set environment humidity upper limit, environment humidity lower limit, and environment humidity alarm enable. This table's index is hwEnvHumiSensorIndex, which qualificated by hwEnvHumiSensorIndex, clone site environment humidity table." INDEX { hwEnvHumiSensorIndex } ::= { hwEnvHumiSensorTable 1 } HwEnvHumiSensorEntry ::= SEQUENCE { hwEnvHumiSensorIndex Integer32, hwEnvHumiEquipId Unsigned32, hwEnvHumiEquipName OCTET STRING, hwEnvHumidity Integer32, hwSetEnvHumidityUpperLimit Integer32, hwSetEnvHumidityLowerLimit Integer32, hwSetEnvHumidityMeasureUpperLimit Integer32, hwSetEnvHumidityMeasureLowerLimit Integer32, hwSetEnvHumiAlarmEnable INTEGER, hwEnvHumiSensorOperStatus INTEGER, hwEnvHumiSensorRowStatus RowStatus } hwEnvHumiSensorIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Table index of the environment humility sensors. " ::= { hwEnvHumiSensorEntry 1 } hwEnvHumiEquipId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Environment humility sensor ID" ::= { hwEnvHumiSensorEntry 2 } hwEnvHumiEquipName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..63)) MAX-ACCESS read-write STATUS current DESCRIPTION "Environment humility sensor name, of the character string type, is used to specify an environment humility sensor. Users can configure it.Otherwise, the configured character can not be any other languages except English. " ::= { hwEnvHumiSensorEntry 3 } hwEnvHumidity OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Environment humility. It is an environment parameter collected in real time. Value range: 0 to 100, units: %RH, and the value is an integer (1). If the value is 2147483647(0x7FFFFFFF), it indicates that the humidity sensor is not configured." ::= { hwEnvHumiSensorEntry 4 } hwSetEnvHumidityUpperLimit OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "Upper threshold of the environment humility alarm, can be configured by users. Value range: 0 to 100, units: %RH, and the value is an integer (1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwEnvHumiSensorEntry 5 } hwSetEnvHumidityLowerLimit OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "Lower threshold of the environment humility alarm, can be configured by users. Value range: 0 to 100, units: %RH, and the value is an integer (1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwEnvHumiSensorEntry 6 } hwSetEnvHumidityMeasureUpperLimit OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "Upper threshold of the environment humility measurement, can be configured by users. Value range: 0 to 100, units: %RH, and the value is an integer (1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwEnvHumiSensorEntry 7 } hwSetEnvHumidityMeasureLowerLimit OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "Lower threshold of the environment humility measurement, can be configured by users. Value range: 0 to 100, units: %RH, and the value is an integer (1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwEnvHumiSensorEntry 8 } hwSetEnvHumiAlarmEnable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Environment humility alarm. It is an enumeration type: If the enumeration value is 1, enable the alarm of the environment humility; If the enumeration value is 2, disable the alarm of the environment humility. The environment humility alarm is enabled by default. " ::= { hwEnvHumiSensorEntry 9 } hwEnvHumiSensorOperStatus OBJECT-TYPE SYNTAX INTEGER { normal(1), humidityHigh(2), humidityLow(3), notInslot(4), alarmResume(254), unknown(255) } MAX-ACCESS read-only STATUS current DESCRIPTION "State of the site environment humidity sensor. It is an enumeration type: If the enumeration value is 1, it indicates that the site environment humidity sensor is in the normal state; If the enumeration value is 2, it indicates that the environment humidity sensor is over humidity; If the enumeration value is 3, it indicates that the environment humidity sensor is under humidity; If the enumeration value is 4, it indicates that the environment humidity sensor is not in slot; If the enumeration value is 254, it indicates that environment humidity alarm resume; If the enumeration value is 255, it indicates environment humidity sensor operation status unknown. " ::= { hwEnvHumiSensorEntry 99 } hwEnvHumiSensorRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus of Environment humidity table." ::= { hwEnvHumiSensorEntry 100 } hwSpareDigitalTable OBJECT-TYPE SYNTAX SEQUENCE OF HwSpareDigitalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Spare digital table. Use this table to get Spare digital equipment ID , Spare digital equipment name, and current Spare digital alarm tension, ae well as to set Spare digital alarm enable. This table's index is hwSpareDigitalIndex, which qualificated by hwSpareDigitalsTotalQuantity, clone switch input table." ::= { hwEnvSensor 3 } hwSpareDigitalEntry OBJECT-TYPE SYNTAX HwSpareDigitalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Spare digital table. Use this table to get Spare digital equipment ID , Spare digital equipment name, and current Spare digital alarm tension, ae well as to set Spare digital alarm enable. This table's index is hwSpareDigitalIndex, which qualificated by hwSpareDigitalsTotalQuantity, clone switch input table." INDEX { hwSpareDigitalIndex } ::= { hwSpareDigitalTable 1 } HwSpareDigitalEntry ::= SEQUENCE { hwSpareDigitalIndex Integer32, hwSpareDigitalEquipId Unsigned32, hwSpareDigitalEquipName OCTET STRING, hwSpareDigitalAlarmTension INTEGER, hwSpareDigitalAlarmEnable INTEGER, hwSpareDigitalOperStatus INTEGER, hwSpareDigitalRowStatus RowStatus } hwSpareDigitalIndex OBJECT-TYPE SYNTAX Integer32 (1..256) MAX-ACCESS read-only STATUS current DESCRIPTION "Spare digital table index, which value range: 1 to 256. Lines of the device list are restricted by the quantity of Spare digitals (hwSpareDigitalsTotalQuantity). " ::= { hwSpareDigitalEntry 1 } hwSpareDigitalEquipId OBJECT-TYPE SYNTAX Unsigned32 (11001..11255) MAX-ACCESS read-only STATUS current DESCRIPTION "Spare digital device ID. Value range: 011'001 to 011'255, in which the first digits indicate the device type and the last three digits indicate the device SN. " ::= { hwSpareDigitalEntry 2 } hwSpareDigitalEquipName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..8)) MAX-ACCESS read-write STATUS current DESCRIPTION "Spare digital name, of the character string type, is used to specify Spare digitals. Users can configure it. Otherwise, the configured character can not be any other languages except English. " ::= { hwSpareDigitalEntry 3 } hwSpareDigitalAlarmTension OBJECT-TYPE SYNTAX INTEGER { open(0), close(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Spare digital alarm state. It is an enumeration value. If the value of the node is 1, it indicates a low-tension alarm; If the value of the node is 2, it indicates a high-tension alarm. " ::= { hwSpareDigitalEntry 4 } hwSpareDigitalAlarmEnable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Spare digital alarm enabling. It is an enumeration type: If the enumeration value is 1, it means to enable the alarm; If the enumeration value is 2, it means to disable the alarm. " ::= { hwSpareDigitalEntry 5 } hwSpareDigitalOperStatus OBJECT-TYPE SYNTAX INTEGER { normal(1), alarm(2), alarmResume(254), unknown(255) } MAX-ACCESS read-only STATUS current DESCRIPTION "State of the site Spare digital. It is an enumeration type: If the enumeration value is 1, it indicates that the Spare digital operation state is normal; If the enumeration value is 2, it indicates that a alarm occurs on the Spare digital; If the enumeration value is 254, it indicates that spare digital alarm resume; If the enumeration value is 255, it indicates Spare digital operation status unknown." ::= { hwSpareDigitalEntry 99 } hwSpareDigitalRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus of of the site Spare digital. " ::= { hwSpareDigitalEntry 100 } hwSpareDigitalOutputTable OBJECT-TYPE SYNTAX SEQUENCE OF HwSpareDigitalOutputEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Spare digital table. Use this table to get Spare digital equipment ID , Spare digital equipment name, and current Spare digital alarm tension, ae well as to set Spare digital alarm enable. This table's index is hwSpareDigitalIndex, which qualificated by hwSpareDigitalsTotalQuantity, clone switch input table." ::= { hwEnvSensor 4 } hwSpareDigitalOutputEntry OBJECT-TYPE SYNTAX HwSpareDigitalOutputEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Spare digital table. Use this table to get Spare digital equipment ID , Spare digital equipment name, and current Spare digital alarm tension, ae well as to set Spare digital alarm enable. This table's index is hwSpareDigitalIndex, which qualificated by hwSpareDigitalsTotalQuantity, clone switch input table." INDEX { hwSpareDigitalOutputIndex } ::= { hwSpareDigitalOutputTable 1 } HwSpareDigitalOutputEntry ::= SEQUENCE { hwSpareDigitalOutputIndex Integer32, hwSpareDigitalOutputEquipId Unsigned32, hwSpareDigitalOutputEquipName OCTET STRING, hwSetSpareDigitalOutputAlarmCondition INTEGER, hwSetSpareDigitalOutputEnable INTEGER, hwSpareDigitalOutputOperStatus INTEGER, hwSpareDigitalOutputRowStatus RowStatus } hwSpareDigitalOutputIndex OBJECT-TYPE SYNTAX Integer32 (1..256) MAX-ACCESS read-only STATUS current DESCRIPTION "Spare digital table index, which value range: 1 to 256. Lines of the device list are restricted by the quantity of Spare digitals (hwSpareDigitalsTotalQuantity). " ::= { hwSpareDigitalOutputEntry 1 } hwSpareDigitalOutputEquipId OBJECT-TYPE SYNTAX Unsigned32 (12001..12255) MAX-ACCESS read-only STATUS current DESCRIPTION "Spare digital device ID. Value range: 012'001 to 012'255, in which the first digits indicate the device type and the last three digits indicate the device SN. " ::= { hwSpareDigitalOutputEntry 2 } hwSpareDigitalOutputEquipName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..63)) MAX-ACCESS read-write STATUS current DESCRIPTION "Spare digital name, of the character string type, is used to specify Spare digitals. Users can configure it. Otherwise, the configured character can not be any other languages except English. " ::= { hwSpareDigitalOutputEntry 3 } hwSetSpareDigitalOutputAlarmCondition OBJECT-TYPE SYNTAX INTEGER { open(1), close(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Spare digital alarm state. It is an enumeration value. If the value of the node is 1, it indicates a low-tension alarm; If the value of the node is 2, it indicates a high-tension alarm. " ::= { hwSpareDigitalOutputEntry 4 } hwSetSpareDigitalOutputEnable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Spare digital alarm enabling. It is an enumeration type: If the enumeration value is 1, it means to enable the alarm; If the enumeration value is 2, it means to disable the alarm. " ::= { hwSpareDigitalOutputEntry 5 } hwSpareDigitalOutputOperStatus OBJECT-TYPE SYNTAX INTEGER { open(1), close(2), alarmResume(254), unknown(255) } MAX-ACCESS read-only STATUS current DESCRIPTION "State of the site Spare digital. It is an enumeration type: If the enumeration value is 1, it indicates that the Spare digital operation state is normal; If the enumeration value is 2, it indicates that a alarm occurs on the Spare digital; If the enumeration value is 254, it indicates that spare digital alarm resume; If the enumeration value is 255, it indicates Spare digital operation status unknown." ::= { hwSpareDigitalOutputEntry 99 } hwSpareDigitalOutputRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus of Spare digital device table." ::= { hwSpareDigitalOutputEntry 100 } hwTemp1Table OBJECT-TYPE SYNTAX SEQUENCE OF HwTemp1Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Temp1 Table." ::= { hwEnvSensor 5 } hwTemp1Entry OBJECT-TYPE SYNTAX HwTemp1Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Temp1 Table." INDEX { hwTemp1Index } ::= { hwTemp1Table 1 } HwTemp1Entry ::= SEQUENCE { hwTemp1Index Integer32, hwTemp1EquipId Unsigned32, hwTemp1EquipName OCTET STRING, hwTemp1Value Integer32, hwTemp1HighLimit Integer32, hwTemp1LowLimit Integer32, hwTemp1OperStatus INTEGER } hwTemp1Index OBJECT-TYPE SYNTAX Integer32 (3394) MAX-ACCESS read-only STATUS current DESCRIPTION "Table index of the temp1 sensors. Value range: 1 to 256. Lines of the device list are restricted by the quantity of temp1 sensors (hwEnvHumiSensorsTotalQuantity). " ::= { hwTemp1Entry 1 } hwTemp1EquipId OBJECT-TYPE SYNTAX Unsigned32 (26000..26255) MAX-ACCESS read-only STATUS current DESCRIPTION "Temp1 sensor ID, can be configured by users. Value range: 026'000 to 026'255, in which the first digits indicate the device type and the last three digits indicate the device SN." ::= { hwTemp1Entry 2 } hwTemp1EquipName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..63)) MAX-ACCESS read-only STATUS current DESCRIPTION "Temp1 sensor name, of the character string type, is used to specify an temp1 sensor. Users can configure it. Otherwise, the configured character can not be any other languages except English." ::= { hwTemp1Entry 3 } hwTemp1Value OBJECT-TYPE SYNTAX Integer32 ( -40..80) MAX-ACCESS read-only STATUS current DESCRIPTION "Temp1. It is an environment parameter collected in real time. Value range: -40 to +80, units: centigrade (degC), and the value is an integer (1). If the value is -1024, it indicates that the temperature sensor is not configured." ::= { hwTemp1Entry 4 } hwTemp1HighLimit OBJECT-TYPE SYNTAX Integer32 (25..80) MAX-ACCESS read-write STATUS current DESCRIPTION "Upper threshold of the temp1 alarm, can be configured by users. Value range: 25 to 80, units: centigrade (degC), and the value is an integer (1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwTemp1Entry 5 } hwTemp1LowLimit OBJECT-TYPE SYNTAX Integer32 ( -20..20) MAX-ACCESS read-write STATUS current DESCRIPTION "Lower threshold of the temp1 alarm, can be configured by users. Value range: -20 to 20, units: centigrade (degC), and the value is an integer (1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwTemp1Entry 6 } hwTemp1OperStatus OBJECT-TYPE SYNTAX INTEGER { normal(1), tempHigh(2), tempLow(3), notInslot(4), tempFault(5), alarmResume(254), unknown(255) } MAX-ACCESS read-only STATUS current DESCRIPTION "State of the site temp1 sensor. It is an enumeration type: If the enumeration value is 1, it indicates that the site temp1 sensor is in the normal state; If the enumeration value is 2, it indicates that the temp1 sensor is over temperature; If the enumeration value is 3, it indicates that the temp1 sensor is under temperature; If the enumeration value is 4, it indicates that the temp1 sensor is not in slot; If the enumeration value is 5, it indicates that the temp1 sensor is fault; If the enumeration value is 254, it indicates that temp1 alarm resume; If the enumeration value is 255, it indicates temp1 sensor operation status unknown." ::= { hwTemp1Entry 99 } hwTemp2Table OBJECT-TYPE SYNTAX SEQUENCE OF HwTemp2Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Temp2 Table." ::= { hwEnvSensor 6 } hwTemp2Entry OBJECT-TYPE SYNTAX HwTemp2Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Temp2 Table." INDEX { hwTemp2Index } ::= { hwTemp2Table 1 } HwTemp2Entry ::= SEQUENCE { hwTemp2Index Integer32, hwTemp2EquipId Unsigned32, hwTemp2EquipName OCTET STRING, hwTemp2Value Integer32, hwTemp2HighLimit Integer32, hwTemp2LowLimit Integer32, hwTemp2OperStatus INTEGER } hwTemp2Index OBJECT-TYPE SYNTAX Integer32 (3394) MAX-ACCESS read-only STATUS current DESCRIPTION "Table index of the temp2 sensors. Value range: 1 to 256. Lines of the device list are restricted by the quantity of temp2 sensors (hwEnvHumiSensorsTotalQuantity). " ::= { hwTemp2Entry 1 } hwTemp2EquipId OBJECT-TYPE SYNTAX Unsigned32 (27000..27255) MAX-ACCESS read-only STATUS current DESCRIPTION "Temp2 sensor ID, can be configured by users. Value range: 027'000 to 027'255, in which the first digits indicate the device type and the last three digits indicate the device SN." ::= { hwTemp2Entry 2 } hwTemp2EquipName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..63)) MAX-ACCESS read-only STATUS current DESCRIPTION "Temp2 sensor name, of the character string type, is used to specify an temp2 sensor. Users can configure it. Otherwise, the configured character can not be any other languages except English." ::= { hwTemp2Entry 3 } hwTemp2Value OBJECT-TYPE SYNTAX Integer32 ( -40..80) MAX-ACCESS read-only STATUS current DESCRIPTION "Temp2. It is an environment parameter collected in real time. Value range: -40 to +80, units: centigrade (degC), and the value is an integer (1). If the value is -1024, it indicates that the temperature sensor is not configured." ::= { hwTemp2Entry 4 } hwTemp2HighLimit OBJECT-TYPE SYNTAX Integer32 (25..80) MAX-ACCESS read-write STATUS current DESCRIPTION "Upper threshold of the temp2 alarm, can be configured by users. Value range: 25 to 80, units: centigrade (degC), and the value is an integer (1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwTemp2Entry 5 } hwTemp2LowLimit OBJECT-TYPE SYNTAX Integer32 ( -20..20) MAX-ACCESS read-write STATUS current DESCRIPTION "Lower threshold of the temp2 alarm, can be configured by users. Value range: -20 to 20, units: centigrade (degC), and the value is an integer (1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwTemp2Entry 6 } hwTemp2OperStatus OBJECT-TYPE SYNTAX INTEGER { normal(1), tempHigh(2), tempLow(3), notInslot(4), tempFault(5), alarmResume(254), unknown(255) } MAX-ACCESS read-only STATUS current DESCRIPTION "State of the site temp2 sensor. It is an enumeration type: If the enumeration value is 1, it indicates that the site temp2 sensor is in the normal state; If the enumeration value is 2, it indicates that the temp2 sensor is over temperature; If the enumeration value is 3, it indicates that the temp2 sensor is under temperature; If the enumeration value is 4, it indicates that the temp2 sensor is not in slot; If the enumeration value is 5, it indicates that the temp2 sensor is fault; If the enumeration value is 254, it indicates that temp2 alarm resume; If the enumeration value is 255, it indicates temp2 sensor operation status unknown." ::= { hwTemp2Entry 99 } hwSmokeSensorTable OBJECT-TYPE SYNTAX SEQUENCE OF HwSmokeSensorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "/" ::= { hwEnvSensor 13 } hwSmokeSensorEntry OBJECT-TYPE SYNTAX HwSmokeSensorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "/" INDEX { hwSmokeSensorIndex } ::= { hwSmokeSensorTable 1 } HwSmokeSensorEntry ::= SEQUENCE { hwSmokeSensorIndex Unsigned32, hwSmokeSensorEquipId Unsigned32, hwSmokeEquipName OCTET STRING, hwSmokeSensorStatus INTEGER } hwSmokeSensorIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The tem_hum equip Index." ::= { hwSmokeSensorEntry 1 } hwSmokeSensorEquipId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "/" ::= { hwSmokeSensorEntry 2 } hwSmokeEquipName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..63)) MAX-ACCESS read-only STATUS current DESCRIPTION "/" ::= { hwSmokeSensorEntry 3 } hwSmokeSensorStatus OBJECT-TYPE SYNTAX INTEGER { normal(0), alarm(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "The smoke sensor status" ::= { hwSmokeSensorEntry 4 } hwWaterSensorTable OBJECT-TYPE SYNTAX SEQUENCE OF HwWaterSensorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "/" ::= { hwEnvSensor 14 } hwWaterSensorEntry OBJECT-TYPE SYNTAX HwWaterSensorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "/" INDEX { hwWaterSensorIndex } ::= { hwWaterSensorTable 1 } HwWaterSensorEntry ::= SEQUENCE { hwWaterSensorIndex Unsigned32, hwWaterSensorEquipId Unsigned32, hwWaterEquipName OCTET STRING, hwWaterSensorStatus INTEGER } hwWaterSensorIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The tem_hum equip Index." ::= { hwWaterSensorEntry 1 } hwWaterSensorEquipId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "/" ::= { hwWaterSensorEntry 2 } hwWaterEquipName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..63)) MAX-ACCESS read-only STATUS current DESCRIPTION "/" ::= { hwWaterSensorEntry 3 } hwWaterSensorStatus OBJECT-TYPE SYNTAX INTEGER { normal(0), alarm(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "The smoke sensor status" ::= { hwWaterSensorEntry 4 } hwDoorSensorTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDoorSensorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "/" ::= { hwEnvSensor 15 } hwDoorSensorEntry OBJECT-TYPE SYNTAX HwDoorSensorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "/" INDEX { hwDoorSensorIndex } ::= { hwDoorSensorTable 1 } HwDoorSensorEntry ::= SEQUENCE { hwDoorSensorIndex Unsigned32, hwDoorSensorEquipId Unsigned32, hwDoorEquipName OCTET STRING, hwDoorSensorStatus INTEGER } hwDoorSensorIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The tem_hum equip Index." ::= { hwDoorSensorEntry 1 } hwDoorSensorEquipId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "/" ::= { hwDoorSensorEntry 2 } hwDoorEquipName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..63)) MAX-ACCESS read-only STATUS current DESCRIPTION "/" ::= { hwDoorSensorEntry 3 } hwDoorSensorStatus OBJECT-TYPE SYNTAX INTEGER { normal(0), alarm(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "The smoke sensor status" ::= { hwDoorSensorEntry 4 } hwSiteInverters OBJECT IDENTIFIER ::= { hwSiteMonitorMIBObjects 9 } hwInverterGroup OBJECT IDENTIFIER ::= { hwSiteInverters 1 } hwInverterGroupId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Inverter unit group ID. It is the unique ID of the Inverter unit group. The first digits indicate the device type. The last three digits indicate the device SN. If the last three digits are 000, it indicates a virtual device." ::= { hwInverterGroup 1 } hwInverterGroupName OBJECT-TYPE SYNTAX Unsigned32 (0..63 ) MAX-ACCESS read-write STATUS current DESCRIPTION "Inverter unit group name, of the character string type, can be configured by users.Otherwise, the configured character can not be any other languages except English." ::= { hwInverterGroup 2 } hwInverterQuantity OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total site intelligent Inverters. " ::= { hwInverterGroup 3 } hwInverter OBJECT IDENTIFIER ::= { hwSiteInverters 2 } hwInverterTable OBJECT-TYPE SYNTAX SEQUENCE OF HwInverterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "/" ::= { hwInverter 1 } hwInverterEntry OBJECT-TYPE SYNTAX HwInverterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "/" INDEX { hwInverterIndex } ::= { hwInverterTable 1 } HwInverterEntry ::= SEQUENCE { hwInverterIndex Unsigned32, hwInverterEquipId Unsigned32, hwInverterEquipName OCTET STRING, hwInverterAcOutputVolt Unsigned32, hwInverterAcOutputCurr Unsigned32, hwInverterAcOutputFreq Unsigned32, hwInverterAcOutputActivePower Unsigned32, hwInverterAcOutputVA Unsigned32, hwInverterAcInputVolt Unsigned32, hwInverterAcInputCurr Unsigned32, hwInverterAcInputFreq Unsigned32, hwInverterAcInputActivePower Unsigned32, hwInverterAcInputVA Unsigned32, hwInverterDcInputVolt Unsigned32, hwInverterDcInputCurr Unsigned32, hwInverterDcInputPower Unsigned32, hwInverterRevision OCTET STRING, hwInverterPhaseNum Unsigned32, hwInverterAcGroupNum Unsigned32, hwInverterDcGroupNum Unsigned32, hwInverterMajorAlarmNum Unsigned32, hwInverterMinorAlarmNum Unsigned32, hwInverterT2SSerialNum Unsigned32, hwInverterModuleTemp Integer32, hwInverterOperStatus INTEGER, hwInverterRowStatus RowStatus } hwInverterIndex OBJECT-TYPE SYNTAX Unsigned32 (1..256) MAX-ACCESS read-only STATUS current DESCRIPTION "Inverter table index,which value range:1 to 256.Lines of the device list are restricted by the quantity of Inverter." ::= { hwInverterEntry 1 } hwInverterEquipId OBJECT-TYPE SYNTAX Unsigned32 (18001..18255) MAX-ACCESS read-only STATUS current DESCRIPTION "Inverter device ID. Value range: 018'001 to 018'255, in which the first digits indicate the device type and the last three digits indicate the device SN. " ::= { hwInverterEntry 2 } hwInverterEquipName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..63)) MAX-ACCESS read-only STATUS current DESCRIPTION "Inverter name, of the character string type, is used to specify Inverters. Users can configure it.Otherwise, the configured character can not be any other languages except English. " ::= { hwInverterEntry 3 } hwInverterAcOutputVolt OBJECT-TYPE SYNTAX Unsigned32 (0..100000) MAX-ACCESS read-only STATUS current DESCRIPTION "Inverter AC Output voltage, Value range: 0.0 to 10000.0. Unit: V. and the value is accurate to one decimal space (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwInverterEntry 4 } hwInverterAcOutputCurr OBJECT-TYPE SYNTAX Unsigned32 (0..100000) MAX-ACCESS read-only STATUS current DESCRIPTION "Inverter AC Output current, Value range: 0.0 to 10000.0. Unit: A. and the value is accurate to one decimal space (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwInverterEntry 5 } hwInverterAcOutputFreq OBJECT-TYPE SYNTAX Unsigned32 (0..10000) MAX-ACCESS read-only STATUS current DESCRIPTION "Inverter AC Output frequency, Value range: 0 to 10000. Unit: Hz. If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwInverterEntry 6 } hwInverterAcOutputActivePower OBJECT-TYPE SYNTAX Unsigned32 (0..10000000) MAX-ACCESS read-only STATUS current DESCRIPTION "Inverter AC Output power, Value range: 0 to 10000000. Unit: W. If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwInverterEntry 7 } hwInverterAcOutputVA OBJECT-TYPE SYNTAX Unsigned32 (0..100000) MAX-ACCESS read-only STATUS current DESCRIPTION "Inverter AC Output power, Value range: 0.0 to 100000.0. Unit: VA. and the value is accurate to one decimal space (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwInverterEntry 8 } hwInverterAcInputVolt OBJECT-TYPE SYNTAX Unsigned32 (0..100000) MAX-ACCESS read-only STATUS current DESCRIPTION "Inverter AC Input voltage, Value range: 0.0 to 10000.0. Unit: V. and the value is accurate to one decimal space (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwInverterEntry 9 } hwInverterAcInputCurr OBJECT-TYPE SYNTAX Unsigned32 (0..100000) MAX-ACCESS read-only STATUS current DESCRIPTION "Inverter AC Input current, Value range: 0.0 to 10000.0. Unit: A. and the value is accurate to one decimal space (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwInverterEntry 10 } hwInverterAcInputFreq OBJECT-TYPE SYNTAX Unsigned32 (0..10000) MAX-ACCESS read-only STATUS current DESCRIPTION "Inverter AC Input frequency, Value range: 0 to 10000. Unit: Hz. If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwInverterEntry 11 } hwInverterAcInputActivePower OBJECT-TYPE SYNTAX Unsigned32 (0..10000000) MAX-ACCESS read-only STATUS current DESCRIPTION "Inverter AC Input power, Value range: 0 to 10000000. Unit: W. If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwInverterEntry 12 } hwInverterAcInputVA OBJECT-TYPE SYNTAX Unsigned32 (0..100000) MAX-ACCESS read-only STATUS current DESCRIPTION "Inverter AC Input power, Value range: 0.0 to 10000.0. Unit: VA. and the value is accurate to one decimal space (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwInverterEntry 13 } hwInverterDcInputVolt OBJECT-TYPE SYNTAX Unsigned32 (0..100000) MAX-ACCESS read-only STATUS current DESCRIPTION "Inverter DC Input voltage, Value range: 0.0 to 10000.0. Unit: V. and the value is accurate to one decimal space (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwInverterEntry 14 } hwInverterDcInputCurr OBJECT-TYPE SYNTAX Unsigned32 (0..100000) MAX-ACCESS read-only STATUS current DESCRIPTION "Inverter DC Input current, Value range: 0 to 10000. Unit: A. and the value is accurate to one decimal space (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwInverterEntry 15 } hwInverterDcInputPower OBJECT-TYPE SYNTAX Unsigned32 (0..10000000) MAX-ACCESS read-only STATUS current DESCRIPTION "Inverter DC Input power, Value range: 0 to 10000000. Unit: W. If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwInverterEntry 16 } hwInverterRevision OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..63)) MAX-ACCESS read-only STATUS current DESCRIPTION "Inverter software version number." ::= { hwInverterEntry 17 } hwInverterPhaseNum OBJECT-TYPE SYNTAX Unsigned32 (0..10000) MAX-ACCESS read-only STATUS current DESCRIPTION "Inverter Number of the phase module, Value range: 0 to 10000. If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwInverterEntry 18 } hwInverterAcGroupNum OBJECT-TYPE SYNTAX Unsigned32 (0..10000) MAX-ACCESS read-only STATUS current DESCRIPTION "Inverter Number of AC group, Value range: 0 to 10000. If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwInverterEntry 19 } hwInverterDcGroupNum OBJECT-TYPE SYNTAX Unsigned32 (0..10000) MAX-ACCESS read-only STATUS current DESCRIPTION "Inverter Number of DC group, Value range: 0 to 10000. If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwInverterEntry 20 } hwInverterMajorAlarmNum OBJECT-TYPE SYNTAX Unsigned32 (0..10000) MAX-ACCESS read-only STATUS current DESCRIPTION "Inverter Number of Major alarm, Value range: 0 to 10000. If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwInverterEntry 21 } hwInverterMinorAlarmNum OBJECT-TYPE SYNTAX Unsigned32 (0..10000) MAX-ACCESS read-only STATUS current DESCRIPTION "Inverter Number of Minor alarm, Value range: 0 to 10000. If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwInverterEntry 22 } hwInverterT2SSerialNum OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Inverter T2S serial number, Value range: 0 to 4294967295. If the value is 4294967295(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwInverterEntry 23 } hwInverterModuleTemp OBJECT-TYPE SYNTAX Integer32 (-300..10000) MAX-ACCESS read-only STATUS current DESCRIPTION "Inverter module Temperature, Value range: -300 to 10000. Unit: degC. If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwInverterEntry 24 } hwInverterOperStatus OBJECT-TYPE SYNTAX INTEGER { normal(1), alarm(2), alarmResume(254), unknow(255) } MAX-ACCESS read-only STATUS current DESCRIPTION "State of the Inverter. It is an enumeration type: If the enumeration value is 1, it indicates that the Inverter is in the normal state; If the enumeration value is 2, it indicates that the Inverter is in the alarm state; If the enumeration value is 254, it indicates that the Inverter is in the resume state; If the enumeration value is 255, it indicates Inverter operation status unknown. " ::= { hwInverterEntry 99 } hwInverterRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS current DESCRIPTION "RowStatus of Inverter table." ::= { hwInverterEntry 100 } hwSiteCoolingDevices OBJECT IDENTIFIER ::= { hwSiteMonitorMIBObjects 10 } hwCoolingDevicesGroup OBJECT IDENTIFIER ::= { hwSiteCoolingDevices 1 } hwCoolingDevicesEquipId OBJECT-TYPE SYNTAX Integer32 (19001..19255) MAX-ACCESS read-only STATUS current DESCRIPTION "CoolingDevices unit group ID. Value range: 019'001 to 019'255, in which the first digits indicate the device type and the last three digits indicate the device SN. " ::= { hwCoolingDevicesGroup 1 } hwCoolingDevicesEquipName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..63)) MAX-ACCESS read-write STATUS current DESCRIPTION "CoolingDevices unit group name, of the character string type, can be configured by users. Otherwise, the configured character can not be any other languages except English." ::= { hwCoolingDevicesGroup 2 } hwCoolingDevicesMode OBJECT-TYPE SYNTAX INTEGER { fanOnly(1), acOnly(2), smartMode(3), unknown(255) } MAX-ACCESS read-write STATUS current DESCRIPTION "State of the CoolingDevices TC mode. It is an enumeration type: If the enumeration value is 1, it indicates that the CoolingDeviecs is in fanOnly state; If the enumeration value is 2, it indicates that the CoolingDeviecs is in acOnly state; If the enumeration value is 3, it indicates that the CoolingDeviecs is in smartMode state; If the enumeration value is 255, it indicates Inverter operation status unknown. " ::= { hwCoolingDevicesGroup 3 } hwCoolingDevicesHighTempAlarmTreshold OBJECT-TYPE SYNTAX Integer32 (25..80) MAX-ACCESS read-write STATUS current DESCRIPTION "CoolingDevices high temp alarm tres, Value range: 25 to 80 Unit: degC. and the value is an integer (1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwCoolingDevicesGroup 4 } hwCoolingDevicesHighTempAlarmClearTreshold OBJECT-TYPE SYNTAX Integer32 (25..80) MAX-ACCESS read-write STATUS current DESCRIPTION "CoolingDevices high temp alarm clear tres, Value range: 25 to 80 Unit: degC. and the value is an integer (1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwCoolingDevicesGroup 5 } hwCoolingDevicesExpelHidry OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "State of the CoolingDevices expel hidry. It is an enumeration type: If the enumeration value is 1, it indicates that the CoolingDeviecs is in no state; If the enumeration value is 2, it indicates that the CoolingDeviecs is in yes state; " ::= { hwCoolingDevicesGroup 6 } hwCoolingDevicesEquip OBJECT IDENTIFIER ::= { hwSiteCoolingDevices 2 } hwFanTable OBJECT-TYPE SYNTAX SEQUENCE OF HwFanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "/" ::= { hwCoolingDevicesEquip 1 } hwFanEntry OBJECT-TYPE SYNTAX HwFanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "/" INDEX { hwFanIndex } ::= { hwFanTable 1 } HwFanEntry ::= SEQUENCE { hwFanIndex Unsigned32, hwFanEquipId Unsigned32, hwFanEquipName OCTET STRING, hwFanCtrlMode INTEGER, hwFan1Status INTEGER, hwFan2Status INTEGER, hwFan3Status INTEGER, hwFan4Status INTEGER, hwFan1Speed Integer32, hwFan2Speed Integer32, hwFan3Speed Integer32, hwFan4Speed Integer32, hwFanOperStatus INTEGER, hwFanRowStatus RowStatus } hwFanIndex OBJECT-TYPE SYNTAX Unsigned32 (1..256) MAX-ACCESS read-only STATUS current DESCRIPTION "Fan table index,which value range: 1 to 256. Lines of the device list are restricted by the quantity of Fan." ::= { hwFanEntry 1 } hwFanEquipId OBJECT-TYPE SYNTAX Unsigned32 (20001..20255) MAX-ACCESS read-only STATUS current DESCRIPTION "Fan device ID. Value range: 020'001 to 020'255, in which the first digits indicate the device type and the last three digits indicate the device SN. " ::= { hwFanEntry 2 } hwFanEquipName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..63)) MAX-ACCESS read-only STATUS current DESCRIPTION "Fan name, of the character string type, is used to specify Fans. Users can configure it. Otherwise, the configured character can not be any other languages except English. " ::= { hwFanEntry 3 } hwFanCtrlMode OBJECT-TYPE SYNTAX INTEGER { autoControl(1), manualControl(2), other(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "State of the Fan ctrl mode. It is an enumeration type: If the enumeration value is 1, it indicates that the fan is in autoControl state; If the enumeration value is 2, it indicates that the fan is in manualControl state; If the enumeration value is 3, it indicates that the fan is in other state;" ::= { hwFanEntry 4 } hwFan1Status OBJECT-TYPE SYNTAX INTEGER { normal(1), fault(2), inexistent(3), unknown(255) } MAX-ACCESS read-only STATUS current DESCRIPTION "State of the Fan1 status. It is an enumeration type: If the enumeration value is 1, it indicates that the fan is in normal state; If the enumeration value is 2, it indicates that the fan is in fault state; If the enumeration value is 3, it indicates that the fan is in inexistent state; If the enumeration value is 255, it indicates that the fan is in unknown state;" ::= { hwFanEntry 5 } hwFan2Status OBJECT-TYPE SYNTAX INTEGER { normal(1), fault(2), inexistent(3), unknown(255) } MAX-ACCESS read-only STATUS current DESCRIPTION "State of the Fan2 status. It is an enumeration type: If the enumeration value is 1, it indicates that the fan is in normal state; If the enumeration value is 2, it indicates that the fan is in fault state; If the enumeration value is 3, it indicates that the fan is in inexistent state; If the enumeration value is 255, it indicates that the fan is in unknown state;" ::= { hwFanEntry 6 } hwFan3Status OBJECT-TYPE SYNTAX INTEGER { normal(1), fault(2), inexistent(3), unknown(255) } MAX-ACCESS read-only STATUS current DESCRIPTION "State of the Fan3 status. It is an enumeration type: If the enumeration value is 1, it indicates that the fan is in normal state; If the enumeration value is 2, it indicates that the fan is in fault state; If the enumeration value is 3, it indicates that the fan is in inexistent state; If the enumeration value is 255, it indicates that the fan is in unknown state;" ::= { hwFanEntry 7 } hwFan4Status OBJECT-TYPE SYNTAX INTEGER { normal(1), fault(2), inexistent(3), unknown(255) } MAX-ACCESS read-only STATUS current DESCRIPTION "State of the Fan4 status. It is an enumeration type: If the enumeration value is 1, it indicates that the fan is in normal state; If the enumeration value is 2, it indicates that the fan is in fault state; If the enumeration value is 3, it indicates that the fan is in inexistent state; If the enumeration value is 255, it indicates that the fan is in unknown state;" ::= { hwFanEntry 8 } hwFan1Speed OBJECT-TYPE SYNTAX Integer32 (0..10000) MAX-ACCESS read-only STATUS current DESCRIPTION "Fan1 speed, Value range: 0 to 10000. Unit: rpm. the value is an integer (1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwFanEntry 9 } hwFan2Speed OBJECT-TYPE SYNTAX Integer32 (0..10000) MAX-ACCESS read-only STATUS current DESCRIPTION "Fan2 speed, Value range: 0 to 10000. Unit: rpm. the value is an integer (1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwFanEntry 10 } hwFan3Speed OBJECT-TYPE SYNTAX Integer32 (0..10000) MAX-ACCESS read-only STATUS current DESCRIPTION "Fan3 speed, Value range: 0 to 10000. Unit: rpm. the value is an integer (1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwFanEntry 11 } hwFan4Speed OBJECT-TYPE SYNTAX Integer32 (0..10000) MAX-ACCESS read-only STATUS current DESCRIPTION "Fan4 speed, Value range: 0 to 10000. Unit: rpm. the value is an integer (1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwFanEntry 12 } hwFanOperStatus OBJECT-TYPE SYNTAX INTEGER { normal(1), fault(2), alarmResume(254), unknow(255) } MAX-ACCESS read-only STATUS current DESCRIPTION "State of the fan. It is an enumeration type: If the enumeration value is 1, it indicates that the Inverter is in the normal state; If the enumeration value is 2, it indicates that the Inverter is in the fault state; If the enumeration value is 254, it indicates that the Inverter is in the resume state; If the enumeration value is 255, it indicates Inverter operation status unknown. " ::= { hwFanEntry 99 } hwFanRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus fo fan table." ::= { hwFanEntry 100 } hwDcAirConditionTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDcAirConditionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { hwCoolingDevicesEquip 2 } hwDcAirConditionEntry OBJECT-TYPE SYNTAX HwDcAirConditionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { hwDcAirIndex } ::= { hwDcAirConditionTable 1 } HwDcAirConditionEntry ::= SEQUENCE { hwDcAirIndex Unsigned32, hwDcAirEquipId Unsigned32, hwDcAirEquipName OCTET STRING, hwDcAirCtrlMode INTEGER, hwDcAirCtrlOnOff INTEGER, hwDcAirRunStatus INTEGER, hwDcAirCompressorRunStatus INTEGER, hwDcAirInnrFanSpeed Integer32, hwDcAirOuterFanSpeed Integer32, hwDcAirCompressorRunTime Integer32, hwDcAirRunTime Integer32, hwDcAirEnterChannelTemp Integer32, hwDcAirPowerOnTempPoint Integer32, hwDcAirPowerOffTempPoint Integer32, hwAcOffEnergySaving INTEGER, hwDcAirPowerOnAcOffPoint Integer32, hwDcAirPowerOffAcOffPoint Integer32, hwDcAirEquipAddress Unsigned32, hwDcAirOperStatus INTEGER, hwDcAirRowStatus RowStatus } hwDcAirIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Dc aircondition table index" ::= { hwDcAirConditionEntry 1 } hwDcAirEquipId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Dc aircondition device ID. " ::= { hwDcAirConditionEntry 2 } hwDcAirEquipName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..63)) MAX-ACCESS read-only STATUS current DESCRIPTION "Dc aircondition name, of the character string type, is used to specify Fans. Users can configure it. Otherwise, the configured character can not be any other languages except English. " ::= { hwDcAirConditionEntry 3 } hwDcAirCtrlMode OBJECT-TYPE SYNTAX INTEGER { autoControl(1), manualControl(2), unknown(255) } MAX-ACCESS read-write STATUS current DESCRIPTION "State of the Dc aircondition ctrl mode. It is an enumeration type: If the enumeration value is 1, it indicates that the Dc aircondition is in autoControl state; If the enumeration value is 2, it indicates that the Dc aircondition is in manualControl state; If the enumeration value is 255, it indicates that the Dc aircondition is in unknown state;" ::= { hwDcAirConditionEntry 4 } hwDcAirCtrlOnOff OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "State of the Dc aircondition control on or off. It is an enumeration type: If the enumeration value is 1, it indicates that the Dc aircondition is in on state; If the enumeration value is 2, it indicates that the Dc aircondition is in off state;" ::= { hwDcAirConditionEntry 5 } hwDcAirRunStatus OBJECT-TYPE SYNTAX INTEGER { standby(1), run(2), fault(3), unknown(255) } MAX-ACCESS read-only STATUS current DESCRIPTION "State of the Dc aircondition run status. It is an enumeration type: If the enumeration value is 1, it indicates that the Dc aircondition is in standby state; If the enumeration value is 2, it indicates that the Dc aircondition is in run state; If the enumeration value is 3, it indicates that the Dc aircondition is in fault state; If the enumeration value is 255, it indicates that the Dc aircondition is other state." ::= { hwDcAirConditionEntry 6 } hwDcAirCompressorRunStatus OBJECT-TYPE SYNTAX INTEGER { standby(1), run(2), fault(3), unknown(255) } MAX-ACCESS read-only STATUS current DESCRIPTION "State of the Dc air compressor run status. It is an enumeration type: If the enumeration value is 1, it indicates that the Dc aircondition is in standby state; If the enumeration value is 2, it indicates that the Dc aircondition is in run state; If the enumeration value is 3, it indicates that the Dc aircondition is in fault state; If the enumeration value is 255, it indicates that the Dc aircondition is unknown state." ::= { hwDcAirConditionEntry 7 } hwDcAirInnrFanSpeed OBJECT-TYPE SYNTAX Integer32 (0..60000) MAX-ACCESS read-only STATUS current DESCRIPTION "Dc aircondition innr speed, Value range: 0 to 60000. Unit: rpm, and the value is an integer (1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwDcAirConditionEntry 8 } hwDcAirOuterFanSpeed OBJECT-TYPE SYNTAX Integer32 (0..60000) MAX-ACCESS read-only STATUS current DESCRIPTION "Dc aircondition outer speed, Value range: 0.0 to 60000.0. Unit: rpm, and the value is an integer (1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwDcAirConditionEntry 9 } hwDcAirCompressorRunTime OBJECT-TYPE SYNTAX Integer32 (0..175200) MAX-ACCESS read-only STATUS current DESCRIPTION "Dc aircondition compressor run time, Value range: 0 to 175200. Unit: h, the value is an integer (1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwDcAirConditionEntry 10 } hwDcAirRunTime OBJECT-TYPE SYNTAX Integer32 (0..175200) MAX-ACCESS read-only STATUS current DESCRIPTION "Dc aircondition run time, Value range: 0 to 175200. Unit: H, the value is an integer (1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwDcAirConditionEntry 11 } hwDcAirEnterChannelTemp OBJECT-TYPE SYNTAX Integer32 ( -500..1000) MAX-ACCESS read-only STATUS current DESCRIPTION "Dc aircondition enter channel temperature, Value range:-500.0 to 1000.0. Unit: degC. and the value is an integer (1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwDcAirConditionEntry 13 } hwDcAirPowerOnTempPoint OBJECT-TYPE SYNTAX Integer32 ( -200..800) MAX-ACCESS read-write STATUS current DESCRIPTION "Dc aircondition power on temperature point, Value range:-200 to 800. Unit: degC. the value is an integer (1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwDcAirConditionEntry 14 } hwDcAirPowerOffTempPoint OBJECT-TYPE SYNTAX Integer32 ( -200..800) MAX-ACCESS read-write STATUS current DESCRIPTION "Dc aircondition power off temperature point, Value range:-200 to 800 Unit: degC. the value is an integer (1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwDcAirConditionEntry 15 } hwAcOffEnergySaving OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "State of the Dc air energy saving status. It is an enumeration type: If the enumeration value is 1, it indicates that the Dc aircondition is in disable state; If the enumeration value is 2, it indicates that the Dc aircondition is in enable state;" ::= { hwDcAirConditionEntry 17 } hwDcAirPowerOnAcOffPoint OBJECT-TYPE SYNTAX Integer32 ( -200..800) MAX-ACCESS read-write STATUS current DESCRIPTION "Dc aircondition power on ac fail temperature point, Value range:-200 to 800. Unit: degC. and the value is an integer (1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwDcAirConditionEntry 18 } hwDcAirPowerOffAcOffPoint OBJECT-TYPE SYNTAX Integer32 ( -200..800) MAX-ACCESS read-write STATUS current DESCRIPTION "Dc aircondition compressor start temperature point, Value range:-200 to 800. Unit: degC. and the value is an integer (1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwDcAirConditionEntry 19 } hwDcAirEquipAddress OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION " DC Air Device address And the value is an integer (1)." ::= { hwDcAirConditionEntry 21 } hwDcAirOperStatus OBJECT-TYPE SYNTAX INTEGER { standby(1), run(2), fault(3), alarmResume(254), unknown(255) } MAX-ACCESS read-only STATUS current DESCRIPTION "State of the dc aircondition. It is an enumeration type: If the enumeration value is 1, it indicates that the Inverter is in the standby state; If the enumeration value is 2, it indicates that the Inverter is in the run state; If the enumeration value is 3, it indicates that the Inverter is in the fault state; If the enumeration value is 254, it indicates that the Inverter is in the resume state; If the enumeration value is 255, it indicates Inverter operation status unknown. " ::= { hwDcAirConditionEntry 99 } hwDcAirRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus fo dc aircondition table." ::= { hwDcAirConditionEntry 100 } hwSiteAcAmmeters OBJECT IDENTIFIER ::= { hwSiteMonitorMIBObjects 11 } hwSiteAcAmmeterEquip OBJECT IDENTIFIER ::= { hwSiteAcAmmeters 2 } hwSiteAcAmmeterTable OBJECT-TYPE SYNTAX SEQUENCE OF HwSiteAcAmmeterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "/" ::= { hwSiteAcAmmeterEquip 1 } hwSiteAcAmmeterEntry OBJECT-TYPE SYNTAX HwSiteAcAmmeterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "/" INDEX { hwAcAmmeterIndex } ::= { hwSiteAcAmmeterTable 1 } HwSiteAcAmmeterEntry ::= SEQUENCE { hwAcAmmeterIndex Unsigned32, hwAcAmmeterEquipId Unsigned32, hwAcAmmeterEquipName OCTET STRING, hwAcAmmeterFrequency Unsigned32, hwAcAmmeterPhaseL1Voltage Unsigned32, hwAcAmmeterPhaseL2Voltage Unsigned32, hwAcAmmeterPhaseL3Voltage Unsigned32, hwAcAmmeterSetChannelNum Unsigned32, hwAcAmmeterClear INTEGER, hwAcAmmeterType Unsigned32, hwAcAmmeterVersion OCTET STRING, hwAcAmmeterPhaseL1CurrentCH1 Unsigned32, hwAcAmmeterPhaseL2CurrentCH1 Unsigned32, hwAcAmmeterPhaseL3CurrentCH1 Unsigned32, hwAcAmmeterTotalActivePowerCH1 Integer32, hwAcAmmeterTotalPowerFactorCH1 Integer32, hwAcAmmeterTotalActiveEngryAccCH1 Unsigned32, hwAcAmmeterPhaseL1CurrentCH2 Unsigned32, hwAcAmmeterPhaseL2CurrentCH2 Unsigned32, hwAcAmmeterPhaseL3CurrentCH2 Unsigned32, hwAcAmmeterTotalActivePowerCH2 Integer32, hwAcAmmeterTotalPowerFactorCH2 Integer32, hwAcAmmeterTotalActiveEngryAccCH2 Unsigned32, hwAcAmmeterPhaseL1CurrentCH3 Unsigned32, hwAcAmmeterPhaseL2CurrentCH3 Unsigned32, hwAcAmmeterPhaseL3CurrentCH3 Unsigned32, hwAcAmmeterTotalActivePowerCH3 Integer32, hwAcAmmeterTotalPowerFactorCH3 Integer32, hwAcAmmeterTotalActiveEngryAccCH3 Unsigned32, hwAcAmmeterPhaseL1CurrentCH4 Unsigned32, hwAcAmmeterPhaseL2CurrentCH4 Unsigned32, hwAcAmmeterPhaseL3CurrentCH4 Unsigned32, hwAcAmmeterTotalActivePowerCH4 Integer32, hwAcAmmeterTotalPowerFactorCH4 Integer32, hwAcAmmeterTotalActiveEngryAccCH4 Unsigned32, hwAcAmmeterOperStatus INTEGER, hwAcAmmeterRowStatus RowStatus } hwAcAmmeterIndex OBJECT-TYPE SYNTAX Unsigned32 (4096..20479) MAX-ACCESS read-only STATUS current DESCRIPTION "Ac Ammeter table index,which value range:4096 to 20479. Lines of the device list are restricted by the quantity of AcAmmeter" ::= { hwSiteAcAmmeterEntry 1 } hwAcAmmeterEquipId OBJECT-TYPE SYNTAX Unsigned32 (22001..22255) MAX-ACCESS read-only STATUS current DESCRIPTION "Ac Ammeter device ID. Value range: 022'001 to 022'255, in which the first digits indicate the device type and the last three digits indicate the device SN." ::= { hwSiteAcAmmeterEntry 2 } hwAcAmmeterEquipName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..63)) MAX-ACCESS read-only STATUS current DESCRIPTION "Ac Ammeter name, of the character string type, is used to specify Fans. Users can configure it. Otherwise, the configured character can not be any other languages except English. " ::= { hwSiteAcAmmeterEntry 3 } hwAcAmmeterFrequency OBJECT-TYPE SYNTAX Unsigned32 (0..100000) MAX-ACCESS read-only STATUS current DESCRIPTION "Ac Ammeter frequency, Value range: 0.00 to 1000.00. Unit: Hz. and the value is accurate to two decimal space (.01). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwSiteAcAmmeterEntry 4 } hwAcAmmeterPhaseL1Voltage OBJECT-TYPE SYNTAX Unsigned32 (0..200000) MAX-ACCESS read-only STATUS current DESCRIPTION "Ac Ammeter phase a voltage, Value range: 0.00 to 2000.00. Unit: V. and the value is accurate to two decimal space (.01). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwSiteAcAmmeterEntry 5 } hwAcAmmeterPhaseL2Voltage OBJECT-TYPE SYNTAX Unsigned32 (0..200000) MAX-ACCESS read-only STATUS current DESCRIPTION "Ac Ammeter phase b voltage, Value range: 0.00 to 2000.0. Unit: V. and the value is accurate to two decimal space (.01). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwSiteAcAmmeterEntry 6 } hwAcAmmeterPhaseL3Voltage OBJECT-TYPE SYNTAX Unsigned32 (0..200000) MAX-ACCESS read-only STATUS current DESCRIPTION "Ac Ammeter phase c voltage, Value range: 0.00 to 2000.0. Unit: V. and the value is accurate to two decimal space (.01). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwSiteAcAmmeterEntry 7 } hwAcAmmeterSetChannelNum OBJECT-TYPE SYNTAX Unsigned32 (1..4) MAX-ACCESS read-write STATUS current DESCRIPTION "Ac Ammeter set channel number, Value range: 1 to 4. Unit: NA. and the value is an integer (1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwSiteAcAmmeterEntry 8 } hwAcAmmeterClear OBJECT-TYPE SYNTAX INTEGER { clear(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Ac Ammeter clear communication failure . It is an enumeration type: If the enumeration value is 1, it indicates that the ac ammeter clear communication failure alarm;" ::= { hwSiteAcAmmeterEntry 9 } hwAcAmmeterType OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Ac Ammeter type, Value range: 0 to 65535. And the value is an integer(1)." ::= { hwSiteAcAmmeterEntry 10 } hwAcAmmeterVersion OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..56)) MAX-ACCESS read-only STATUS current DESCRIPTION "Ac Ammeter version, of the character string type, is used to specify Ac Ammeter. Users can not configure it." ::= { hwSiteAcAmmeterEntry 11 } hwAcAmmeterPhaseL1CurrentCH1 OBJECT-TYPE SYNTAX Unsigned32 (0..100000) MAX-ACCESS read-only STATUS current DESCRIPTION "Ac Ammeter phase a current of channel 1, Value range: 0.00 to 1000.0. Unit: A. and the value is accurate to two decimal space (.01). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwSiteAcAmmeterEntry 12 } hwAcAmmeterPhaseL2CurrentCH1 OBJECT-TYPE SYNTAX Unsigned32 (0..100000) MAX-ACCESS read-only STATUS current DESCRIPTION "Ac Ammeter phase b current of channel 1, Value range: 0.00 to 1000.0. Unit: A. and the value is accurate to two decimal space (.01). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwSiteAcAmmeterEntry 13 } hwAcAmmeterPhaseL3CurrentCH1 OBJECT-TYPE SYNTAX Unsigned32 (0..100000) MAX-ACCESS read-only STATUS current DESCRIPTION "Ac Ammeter phase c current of channel 1, Value range: 0.00 to 1000.0. Unit: A. and the value is accurate to two decimal space (.01). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwSiteAcAmmeterEntry 14 } hwAcAmmeterTotalActivePowerCH1 OBJECT-TYPE SYNTAX Integer32 (-100000000..100000000) MAX-ACCESS read-only STATUS current DESCRIPTION "Ac Ammeter phase c current of channel 1, Value range: -1000000.00 to 1000000.00. Unit: kW. and the value is accurate to two decimal space (.01). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwSiteAcAmmeterEntry 15 } hwAcAmmeterTotalPowerFactorCH1 OBJECT-TYPE SYNTAX Integer32 (-1000..1000) MAX-ACCESS read-only STATUS current DESCRIPTION "Ac Ammeter total power factor of channel 1, Value range: -10.00 to 10.00. and the value is accurate to two decimal space (.01). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwSiteAcAmmeterEntry 16 } hwAcAmmeterTotalActiveEngryAccCH1 OBJECT-TYPE SYNTAX Unsigned32 (0..10000000000000) MAX-ACCESS read-only STATUS current DESCRIPTION "Ac Ammeter total active engry acc of channel 1, Value range: 0.00 to 1000000000.00. Unit: kWh. and the value is accurate to two decimal space (.01). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwSiteAcAmmeterEntry 17 } hwAcAmmeterPhaseL1CurrentCH2 OBJECT-TYPE SYNTAX Unsigned32 (0..100000) MAX-ACCESS read-only STATUS current DESCRIPTION "Ac Ammeter phase a current of channel 2, Value range: 0.00 to 1000.00. Unit: A. and the value is accurate to two decimal space (.01). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwSiteAcAmmeterEntry 18 } hwAcAmmeterPhaseL2CurrentCH2 OBJECT-TYPE SYNTAX Unsigned32 (0..100000) MAX-ACCESS read-only STATUS current DESCRIPTION "Ac Ammeter phase b current of channel 2, Value range: 0.00 to 1000.00. Unit: A. and the value is accurate to two decimal space (.01). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwSiteAcAmmeterEntry 19 } hwAcAmmeterPhaseL3CurrentCH2 OBJECT-TYPE SYNTAX Unsigned32 (0..100000) MAX-ACCESS read-only STATUS current DESCRIPTION "Ac Ammeter phase c current of channel 2, Value range: 0.00 to 1000.00. Unit: A. and the value is accurate to two decimal space (.01). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwSiteAcAmmeterEntry 20 } hwAcAmmeterTotalActivePowerCH2 OBJECT-TYPE SYNTAX Integer32 (-100000000..100000000) MAX-ACCESS read-only STATUS current DESCRIPTION "Ac Ammeter phase c current of channel 2, Value range: -1000000.00 to 1000000.00. Unit: kW. and the value is accurate to two decimal space (.01). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwSiteAcAmmeterEntry 21 } hwAcAmmeterTotalPowerFactorCH2 OBJECT-TYPE SYNTAX Integer32 (-1000..1000) MAX-ACCESS read-only STATUS current DESCRIPTION "Ac Ammeter total power factor of channel 2, Value range: -10.00 to 10.00. and the value is accurate to two decimal space (.01). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwSiteAcAmmeterEntry 22 } hwAcAmmeterTotalActiveEngryAccCH2 OBJECT-TYPE SYNTAX Unsigned32 (0..100000000000) MAX-ACCESS read-only STATUS current DESCRIPTION "Ac Ammeter total active engry acc of channel 2, Value range: 0.00 to 1000000000.00. Unit: A. and the value is accurate to two decimal space (.01). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwSiteAcAmmeterEntry 23 } hwAcAmmeterPhaseL1CurrentCH3 OBJECT-TYPE SYNTAX Unsigned32 (0..100000) MAX-ACCESS read-only STATUS current DESCRIPTION "Ac Ammeter phase a current of channel 3, Value range: 0.00 to 1000.00. Unit: A. and the value is accurate to two decimal space (.01). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwSiteAcAmmeterEntry 24 } hwAcAmmeterPhaseL2CurrentCH3 OBJECT-TYPE SYNTAX Unsigned32 (0..100000) MAX-ACCESS read-only STATUS current DESCRIPTION "Ac Ammeter phase b current of channel 3, Value range: 0.00 to 1000.00. Unit: A. and the value is accurate to two decimal space (.01). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwSiteAcAmmeterEntry 25 } hwAcAmmeterPhaseL3CurrentCH3 OBJECT-TYPE SYNTAX Unsigned32 (0..100000) MAX-ACCESS read-only STATUS current DESCRIPTION "Ac Ammeter phase c current of channel 3, Value range: 0.00 to 1000.00. Unit: A. and the value is accurate to two decimal space (.01). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwSiteAcAmmeterEntry 26 } hwAcAmmeterTotalActivePowerCH3 OBJECT-TYPE SYNTAX Integer32 (-100000000..100000000) MAX-ACCESS read-only STATUS current DESCRIPTION "Ac Ammeter phase c current of channel 3, Value range: -1000000.00 to 1000000.00. Unit: kW. and the value is accurate to two decimal space (.01). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwSiteAcAmmeterEntry 27 } hwAcAmmeterTotalPowerFactorCH3 OBJECT-TYPE SYNTAX Integer32 (-1000..1000) MAX-ACCESS read-only STATUS current DESCRIPTION "Ac Ammeter total power factor of channel 3, Value range: -10.00 to 10.00. and the value is accurate to two decimal space (.01). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwSiteAcAmmeterEntry 28 } hwAcAmmeterTotalActiveEngryAccCH3 OBJECT-TYPE SYNTAX Unsigned32 (0..100000000000) MAX-ACCESS read-only STATUS current DESCRIPTION "Ac Ammeter total active engry acc of channel 3, Value range: 0.00 to 1000000000.00. Unit: kWh. and the value is accurate to two decimal space (.01). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwSiteAcAmmeterEntry 29 } hwAcAmmeterPhaseL1CurrentCH4 OBJECT-TYPE SYNTAX Unsigned32 (0..100000) MAX-ACCESS read-only STATUS current DESCRIPTION "Ac Ammeter phase a current of channel 4, Value range: 0 to 1000. Unit: A. and the value is accurate to two decimal space (.01). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwSiteAcAmmeterEntry 30 } hwAcAmmeterPhaseL2CurrentCH4 OBJECT-TYPE SYNTAX Unsigned32 (0..100000) MAX-ACCESS read-only STATUS current DESCRIPTION "Ac Ammeter phase b current of channel 4, Value range: 0 to 1000. Unit: A. and the value is accurate to two decimal space (.01). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwSiteAcAmmeterEntry 31 } hwAcAmmeterPhaseL3CurrentCH4 OBJECT-TYPE SYNTAX Unsigned32 (0..100000) MAX-ACCESS read-only STATUS current DESCRIPTION "Ac Ammeter phase c current of channel 4, Value range: 0 to 1000. Unit: A. and the value is accurate to two decimal space (.01). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwSiteAcAmmeterEntry 32 } hwAcAmmeterTotalActivePowerCH4 OBJECT-TYPE SYNTAX Integer32 (-100000000..100000000) MAX-ACCESS read-only STATUS current DESCRIPTION "Ac Ammeter phase c current of channel 4, Value range: -1000000 to 1000000. Unit: kW. and the value is accurate to two decimal space (.01). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwSiteAcAmmeterEntry 33 } hwAcAmmeterTotalPowerFactorCH4 OBJECT-TYPE SYNTAX Integer32 (-1000..1000) MAX-ACCESS read-only STATUS current DESCRIPTION "Ac Ammeter total power factor of channel 4, Value range: -10.00 to 10.00. and the value is accurate to two decimal space (.01). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwSiteAcAmmeterEntry 34 } hwAcAmmeterTotalActiveEngryAccCH4 OBJECT-TYPE SYNTAX Unsigned32 (0..100000000000) MAX-ACCESS read-only STATUS current DESCRIPTION "Ac Ammeter total active engry acc of channel 4, Value range: 0 to 1000000000. Unit: kWh. and the value is accurate to two decimal space (.01). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwSiteAcAmmeterEntry 35 } hwAcAmmeterOperStatus OBJECT-TYPE SYNTAX INTEGER { normal(1), fault(2), unknown(255) } MAX-ACCESS read-only STATUS current DESCRIPTION "State of the Ac Ammeter. It is an enumeration type: If the enumeration value is 1, it indicates that the Ac Ammeter is in the normal state; If the enumeration value is 2, it indicates that the Ac Ammeter is in the fault state; If the enumeration value is 255, it indicates that the Ac Ammeter is in the unknown state; " ::= { hwSiteAcAmmeterEntry 99 } hwAcAmmeterRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus fo Ac Ammeter table." ::= { hwSiteAcAmmeterEntry 100 } hwSiteDG OBJECT IDENTIFIER ::= { hwSiteMonitorMIBObjects 12 } hwDGGroup OBJECT IDENTIFIER ::= { hwSiteDG 1 } hwDGGroupId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Device group ID of the DG module. It is the unique ID of the DG module group, and its default value: 023,000. The first digits indicate the device type and the last three digits indicate the device SN. If the last three digits are 000, it indicates a virtual device. " ::= { hwDGGroup 1 } hwDGGroupName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..56)) MAX-ACCESS read-only STATUS current DESCRIPTION "Name of the DG module group, character string type, is used to specify the DG module group. Otherwise, the configured character can not be any other languages except English." ::= { hwDGGroup 2 } hwDGAmount OBJECT-TYPE SYNTAX Unsigned32 (0..2) MAX-ACCESS read-write STATUS current DESCRIPTION "Total quantity of the DG modules. Value range: 0 to 2. Units:pcs." ::= { hwDGGroup 3 } hwDG OBJECT IDENTIFIER ::= { hwSiteDG 2 } hwDGTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDGEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "/" ::= { hwDG 1 } hwDGEntry OBJECT-TYPE SYNTAX HwDGEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "/" INDEX { hwDGIndex } ::= { hwDGTable 1 } HwDGEntry ::= SEQUENCE { hwDGIndex Integer32, hwDGEquipId Unsigned32, hwDGEquipName OCTET STRING, hwDGType INTEGER, hwDGAphaseVoltage Unsigned32, hwDGBphaseVoltage Unsigned32, hwDGCphaseVoltage Unsigned32, hwDGAphaseCurrent Unsigned32, hwDGBphaseCurrent Unsigned32, hwDGCphaseCurrent Unsigned32, hwDGOutputPower Unsigned32, hwDGFrequency Unsigned32, hwDGBatteryVoltage Unsigned32, hwDGTotalRuntime Unsigned32, hwDGAphasePowerFactor Integer32, hwDGBphasePowerFactor Integer32, hwDGCphasePowerFactor Integer32, hwDGLoadRate Unsigned32, hwDGOnOffControl INTEGER, hwDGFaultReset INTEGER, hwDGMaintenanceConfirm INTEGER, hwDGOperStatus INTEGER, hwDGRowStatus RowStatus } hwDGIndex OBJECT-TYPE SYNTAX Integer32 (0..256) MAX-ACCESS read-only STATUS current DESCRIPTION "DG table index,which value range:1 to 256. Lines of the device list are restricted by the quantity of DG." ::= { hwDGEntry 1 } hwDGEquipId OBJECT-TYPE SYNTAX Unsigned32 (23001..23255) MAX-ACCESS read-only STATUS current DESCRIPTION "DG device ID. Value range: 023'001 to 023'255, in which the first digits indicate the device type and the last three digits indicate the device SN." ::= { hwDGEntry 2 } hwDGEquipName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..63)) MAX-ACCESS read-only STATUS current DESCRIPTION "Device name of the DG module, character string type, is used to specify the DG module. Otherwise, the configured character can not be any other languages except English." ::= { hwDGEntry 3 } hwDGType OBJECT-TYPE SYNTAX INTEGER { intelligent(1), non_intelligent(2), unknown(255) } MAX-ACCESS read-only STATUS current DESCRIPTION "Specific type of the DG module. It is an enumeration type: If the enumeration value is 1, it indicates a intelligent DG module; If the enumeration value is 2, it indicates a non_intelligent module; If the enumeration value is 255, it indicates a unknown module; " ::= { hwDGEntry 4 } hwDGAphaseVoltage OBJECT-TYPE SYNTAX Unsigned32 (0..5000) MAX-ACCESS read-only STATUS current DESCRIPTION "A-phase voltage. Value range: 0 to 500, units: V, and the value is accurate to one decimal place (.1)." ::= { hwDGEntry 5 } hwDGBphaseVoltage OBJECT-TYPE SYNTAX Unsigned32 (0..5000) MAX-ACCESS read-only STATUS current DESCRIPTION "B-phase voltage. Value range: 0 to 500, units: V, and the value is accurate to one decimal place (.1)." ::= { hwDGEntry 6 } hwDGCphaseVoltage OBJECT-TYPE SYNTAX Unsigned32 (0..5000) MAX-ACCESS read-only STATUS current DESCRIPTION "C-phase voltage. Value range: 0 to 500, units: V, and the value is accurate to one decimal place (.1)." ::= { hwDGEntry 7 } hwDGAphaseCurrent OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "A-phase current. Value range: 0 to 100, units: A, and the value is an integer (1)." ::= { hwDGEntry 8 } hwDGBphaseCurrent OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "B-phase current. Value range: 0 to 100, units: A, and the value is an integer (1)." ::= { hwDGEntry 9 } hwDGCphaseCurrent OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "C-phase current. Value range: 0 to 100, units: A, and the value is an integer (1)." ::= { hwDGEntry 10 } hwDGOutputPower OBJECT-TYPE SYNTAX Unsigned32 (0..1000) MAX-ACCESS read-only STATUS current DESCRIPTION "DG output power. Value range: 0 to 100, units: kw, and the value is one decimal space (.1)." ::= { hwDGEntry 11 } hwDGFrequency OBJECT-TYPE SYNTAX Unsigned32 (50..1200) MAX-ACCESS read-only STATUS current DESCRIPTION "The frequency of DG. Value range: 5 to 120, units: Hz, and the value is one decimal space (.1)." ::= { hwDGEntry 12 } hwDGBatteryVoltage OBJECT-TYPE SYNTAX Unsigned32 (0..240) MAX-ACCESS read-only STATUS current DESCRIPTION "The voltage of DG battery. Value range: 0 to 24, units: V, and the value is one decimal space (.1)." ::= { hwDGEntry 13 } hwDGTotalRuntime OBJECT-TYPE SYNTAX Unsigned32 (0..8760000) MAX-ACCESS read-only STATUS current DESCRIPTION "The total running time of DG, Value range: 0 to 876000, units: h, and the value is one decimal space (.1)." ::= { hwDGEntry 14 } hwDGAphasePowerFactor OBJECT-TYPE SYNTAX Integer32 (-100..100) MAX-ACCESS read-only STATUS current DESCRIPTION "A phase power factor of DG, Value range: -1 to 1, units: , and the value is two decimal space (.01)." ::= { hwDGEntry 15 } hwDGBphasePowerFactor OBJECT-TYPE SYNTAX Integer32 (-100..100) MAX-ACCESS read-only STATUS current DESCRIPTION "B phase power factor of DG, Value range: -1 to 1, units: , and the value is two decimal space (.01)." ::= { hwDGEntry 16 } hwDGCphasePowerFactor OBJECT-TYPE SYNTAX Integer32 (-100..100) MAX-ACCESS read-only STATUS current DESCRIPTION "C phase power factor of DG, Value range: -1 to 1, units: , and the value is two decimal space (.01)." ::= { hwDGEntry 17 } hwDGLoadRate OBJECT-TYPE SYNTAX Unsigned32 (0..1000) MAX-ACCESS read-only STATUS current DESCRIPTION "The load rate of DG, Value range: 0 to 100, units: %, and the value is one decimal space (.1). " ::= { hwDGEntry 18 } hwDGOnOffControl OBJECT-TYPE SYNTAX INTEGER { on(1), off(2), unknown(255) } MAX-ACCESS read-write STATUS current DESCRIPTION "Power-on or power-off of the DG module, is an enumeration value. Users can modify the enumeration value of this node, thus controlling of the power-on or power-off of the DG module: If the NMS notifies the SNMP agent that this node is set to 1, it indicates power-on of the DG module; If the NMS notifies the SNMP agent that this node is set to 2, it indicates power-off of the DG module. If the NMS notifies the SNMP agent that this node is set to 255, it indicates unknown of the DG module." ::= { hwDGEntry 19 } hwDGFaultReset OBJECT-TYPE SYNTAX INTEGER { reset(1), unknown(255) } MAX-ACCESS read-write STATUS current DESCRIPTION "DG fault reset." ::= { hwDGEntry 20 } hwDGMaintenanceConfirm OBJECT-TYPE SYNTAX INTEGER { reset(1), unknown(255) } MAX-ACCESS read-write STATUS current DESCRIPTION "DG maintenance confirm." ::= { hwDGEntry 21 } hwDGOperStatus OBJECT-TYPE SYNTAX INTEGER { stop(1), running(2), unknown(255) } MAX-ACCESS read-only STATUS current DESCRIPTION "State of the DG. It is an enumeration type: If the enumeration value is 1, it indicates that the DG is in the normal state; If the enumeration value is 2, it indicates that the DG is in the fault state; If the enumeration value is 255, it indicates that the DG is in the unknown state; " ::= { hwDGEntry 99 } hwDGRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus fo DG." ::= { hwDGEntry 100 } hwSiteSSU OBJECT IDENTIFIER ::= { hwSiteMonitorMIBObjects 13 } hwSSUGroup OBJECT IDENTIFIER ::= { hwSiteSSU 1 } hwSSUGroupId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Device group ID of the SSU module. It is the unique ID of the SSU module group, and its default value: 024,000. The first digits indicate the device type and the last three digits indicate the device SN. If the last three digits are 000, it indicates a virtual device. " ::= { hwSSUGroup 1 } hwSSUGroupName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..56)) MAX-ACCESS read-only STATUS current DESCRIPTION "Name of the SSU module group, character string type, is used to specify the SSU module group. Otherwise, the configured character can not be any other languages except English." ::= { hwSSUGroup 2 } hwSSUTotalCurrent OBJECT-TYPE SYNTAX Unsigned32 (0..10000) MAX-ACCESS read-only STATUS current DESCRIPTION "The total output current of SSU. Value range: 0 to 1000, units: A, and the value is one decimal space (.1)." ::= { hwSSUGroup 3 } hwSSUTotalOutputPower OBJECT-TYPE SYNTAX Unsigned32 (0..100000000) MAX-ACCESS read-only STATUS current DESCRIPTION "The total output current of SSU. Value range: 0 to 10000000, units: kWh, and the value is one decimal space (.1)." ::= { hwSSUGroup 4 } hwSSUClearLostAlarms OBJECT-TYPE SYNTAX INTEGER { normal(1), clear(2), unknown(255) } MAX-ACCESS read-write STATUS current DESCRIPTION "Clear the lost alarm of SSU." ::= { hwSSUGroup 5 } hwSSUAmount OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Total quantity of the SSU modules. Value range: 0 to 100. Units:pcs." ::= { hwSSUGroup 6 } hwSSU OBJECT IDENTIFIER ::= { hwSiteSSU 2 } hwSSUTable OBJECT-TYPE SYNTAX SEQUENCE OF HwSSUEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "/" ::= { hwSSU 1 } hwSSUEntry OBJECT-TYPE SYNTAX HwSSUEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "/" INDEX { hwSSUIndex } ::= { hwSSUTable 1 } HwSSUEntry ::= SEQUENCE { hwSSUIndex Integer32, hwSSUEquipId Unsigned32, hwSSUEquipName OCTET STRING, hwSSURunningState INTEGER, hwSSUInputVoltage Unsigned32, hwSSUOutputVoltage Unsigned32, hwSSUOutputCurrent Unsigned32, hwSSUAddress Unsigned32, hwSSURowStatus RowStatus } hwSSUIndex OBJECT-TYPE SYNTAX Integer32 (0..256) MAX-ACCESS read-only STATUS current DESCRIPTION "SSU table index,which value range:1 to 256. Lines of the device list are restricted by the quantity of SSU." ::= { hwSSUEntry 1 } hwSSUEquipId OBJECT-TYPE SYNTAX Unsigned32 (24001..24255) MAX-ACCESS read-only STATUS current DESCRIPTION "SSU device ID. Value range: 024'001 to 024'255, in which the first digits indicate the device type and the last three digits indicate the device SN." ::= { hwSSUEntry 2 } hwSSUEquipName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..63)) MAX-ACCESS read-only STATUS current DESCRIPTION "Device name of the SSU module, character string type, is used to specify the SSU module. Otherwise, the configured character can not be any other languages except English." ::= { hwSSUEntry 3 } hwSSURunningState OBJECT-TYPE SYNTAX INTEGER { on(1), off(2), nullOper(255) } MAX-ACCESS read-only STATUS current DESCRIPTION "The running status of the SSU module. It is an enumeration type: If the enumeration value is 1, it indicates that the SSU module is power on ; If the enumeration value is 2, it indicates that the SSU module is power off; If the enumeration value is 255, it indicates that the SSU module is nulloper; " ::= { hwSSUEntry 4 } hwSSUInputVoltage OBJECT-TYPE SYNTAX Unsigned32 (0..2000) MAX-ACCESS read-only STATUS current DESCRIPTION "The input voltage of SSU, Value range: 0 to 200, units: V, and the value is one decimal space (.1)." ::= { hwSSUEntry 5 } hwSSUOutputVoltage OBJECT-TYPE SYNTAX Unsigned32 (0..2000) MAX-ACCESS read-only STATUS current DESCRIPTION "The output voltage of SSU, Value range: 0 to 200, units: V, and the value is one decimal space (.1)." ::= { hwSSUEntry 6 } hwSSUOutputCurrent OBJECT-TYPE SYNTAX Unsigned32 (0..10000) MAX-ACCESS read-only STATUS current DESCRIPTION "The output current of SSU, Value range: 0 to 1000, units: A, and the value is one decimal space (.1)." ::= { hwSSUEntry 7 } hwSSUAddress OBJECT-TYPE SYNTAX Unsigned32 (0..100 ) MAX-ACCESS read-only STATUS current DESCRIPTION "The address of SSU, Value range: 0 to 100, units: , and the value is an integer (1)." ::= { hwSSUEntry 8 } hwSSURowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus fo SSU." ::= { hwSSUEntry 100 } hwSiteBatteryCabinets OBJECT IDENTIFIER ::= { hwSiteMonitorMIBObjects 14 } hwSiteBatteryCabinetEquip OBJECT IDENTIFIER ::= { hwSiteBatteryCabinets 2 } hwSiteBatteryCabinetTable OBJECT-TYPE SYNTAX SEQUENCE OF HwSiteBatteryCabinetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "/" ::= { hwSiteBatteryCabinetEquip 1 } hwSiteBatteryCabinetEntry OBJECT-TYPE SYNTAX HwSiteBatteryCabinetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "/" INDEX { hwBatteryCabinetIndex } ::= { hwSiteBatteryCabinetTable 1 } HwSiteBatteryCabinetEntry ::= SEQUENCE { hwBatteryCabinetIndex Unsigned32, hwBatteryCabinetEquipId Unsigned32, hwBatteryCabinetEquipName OCTET STRING, hwBatteryCabinetIndoorVentTemp Integer32, hwBatteryCabinetBattTemp Integer32, hwBatteryCabinetFan1Speed Integer32, hwBatteryCabinetFan2Speed Integer32, hwBatteryCabinetFan3Speed Integer32, hwBatteryCabinetFan4Speed Integer32, hwBatteryCabinetAirConditionerStatus INTEGER, hwBatteryCabinetCompressorStatus INTEGER, hwBatteryCabinetInternalFanSpeed Integer32, hwBatteryCabinetExternalFanSpeed Integer32, hwBatteryCabinetAirConditionerRuntime Unsigned32, hwBatteryCabinetCompressorRuntime Unsigned32, hwBatteryCabinetAirConWorkTemp Integer32, hwBatteryCabinetAirConStopTemp Integer32, hwBatteryCabinetOperStatus INTEGER, hwBatteryCabinetRowStatus RowStatus } hwBatteryCabinetIndex OBJECT-TYPE SYNTAX Unsigned32 (4096..20479) MAX-ACCESS read-only STATUS current DESCRIPTION "Battery Cabinet table index,which value is according to the actual subject. Lines of the device list are restricted by the quantity of Battery Cabinet" ::= { hwSiteBatteryCabinetEntry 1 } hwBatteryCabinetEquipId OBJECT-TYPE SYNTAX Unsigned32 (25000..25255) MAX-ACCESS read-only STATUS current DESCRIPTION "Battery Cabinet device ID. Value range: 025'001 to 025'255, in which the first digits indicate the device type and the last three digits indicate the device SN." ::= { hwSiteBatteryCabinetEntry 2 } hwBatteryCabinetEquipName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..63)) MAX-ACCESS read-only STATUS current DESCRIPTION "Battery Cabinet name, of the character string type, is used to specify battery cabinet. Users can configure it. Otherwise, the configured character can not be any other languages except English. " ::= { hwSiteBatteryCabinetEntry 3 } hwBatteryCabinetIndoorVentTemp OBJECT-TYPE SYNTAX Integer32 ( -40..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Indoor vent temperature. It is an environment parameter collected in real time. Value range: -40 to +100, units: centigrade, and the value is an integer (1). If the value is -99999, it indicates that the temperature sensor is not configured." ::= { hwSiteBatteryCabinetEntry 4 } hwBatteryCabinetBattTemp OBJECT-TYPE SYNTAX Integer32 ( -40..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Battery temperature. It is an environment parameter collected in real time. Value range: -40 to +100, units: centigrade, and the value is an integer (1). If the value is -99999, it indicates that the temperature sensor is not configured." ::= { hwSiteBatteryCabinetEntry 5 } hwBatteryCabinetFan1Speed OBJECT-TYPE SYNTAX Integer32 (0..10000) MAX-ACCESS read-only STATUS current DESCRIPTION "Fan 1 speed, Value range: 0.0 to 10000.0. Unit: rpm, the value is an integer (1). If the value is -1, it indicates that the fan is not configured." ::= { hwSiteBatteryCabinetEntry 6 } hwBatteryCabinetFan2Speed OBJECT-TYPE SYNTAX Integer32 (0..10000) MAX-ACCESS read-only STATUS current DESCRIPTION "Fan 2 speed, Value range: 0.0 to 10000.0. Unit: rpm, the value is an integer (1). If the value is -1, it indicates that the fan is not configured." ::= { hwSiteBatteryCabinetEntry 7 } hwBatteryCabinetFan3Speed OBJECT-TYPE SYNTAX Integer32 (0..10000) MAX-ACCESS read-only STATUS current DESCRIPTION "Fan 3 speed, Value range: 0.0 to 10000.0. Unit: rpm, the value is an integer (1). If the value is -1, it indicates that the fan is not configured." ::= { hwSiteBatteryCabinetEntry 8 } hwBatteryCabinetFan4Speed OBJECT-TYPE SYNTAX Integer32 (0..10000) MAX-ACCESS read-only STATUS current DESCRIPTION "Fan 4 speed, Value range: 0.0 to 10000.0. Unit: rpm, the value is an integer (1). If the value is -1, it indicates that the fan is not configured." ::= { hwSiteBatteryCabinetEntry 9 } hwBatteryCabinetAirConditionerStatus OBJECT-TYPE SYNTAX INTEGER { standby(1), run(2), fault(3), unknown(255) } MAX-ACCESS read-only STATUS current DESCRIPTION "State of the airconditioner. It is an enumeration type: If the enumeration value is 1, it indicates that the airconditioner is in the standby state; If the enumeration value is 2, it indicates that the airconditioner is in the run state; If the enumeration value is 3, it indicates that the airconditioner is in the fault state; If the enumeration value is 255, it indicates airconditioner status unknown. " ::= { hwSiteBatteryCabinetEntry 10 } hwBatteryCabinetCompressorStatus OBJECT-TYPE SYNTAX INTEGER { standby(1), run(2), fault(3), unknown(255) } MAX-ACCESS read-only STATUS current DESCRIPTION "State of the compressor. It is an enumeration type: If the enumeration value is 1, it indicates that the compressor is in the standby state; If the enumeration value is 2, it indicates that the compressor is in the run state; If the enumeration value is 3, it indicates that the compressor is in the fault state; If the enumeration value is 255, it indicates compressor operation status unknown. " ::= { hwSiteBatteryCabinetEntry 11 } hwBatteryCabinetInternalFanSpeed OBJECT-TYPE SYNTAX Integer32 (0..10000) MAX-ACCESS read-only STATUS current DESCRIPTION "Internal Fan speed, Value range: 0 to 10000. Unit: rpm, the value is an integer (1). If the value is -1, it indicates that the fan is not configured." ::= { hwSiteBatteryCabinetEntry 12 } hwBatteryCabinetExternalFanSpeed OBJECT-TYPE SYNTAX Integer32 (0..10000) MAX-ACCESS read-only STATUS current DESCRIPTION "External Fan speed, Value range: 0 to 10000. Unit: rpm, the value is an integer (1). If the value is -1, it indicates that the temperature sensor is not configured." ::= { hwSiteBatteryCabinetEntry 13 } hwBatteryCabinetAirConditionerRuntime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total runtime of the air conditioner. Value units: hour (h), and the value is an integer (1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwSiteBatteryCabinetEntry 14 } hwBatteryCabinetCompressorRuntime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total runtime of the compressor. Value units: hour (h), and the value is an integer (1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwSiteBatteryCabinetEntry 15 } hwBatteryCabinetAirConWorkTemp OBJECT-TYPE SYNTAX Integer32 ( -20..80) MAX-ACCESS read-write STATUS current DESCRIPTION "Battery cabinet aircondition power on temperature point, Value range:-20 to 80 Unit: degC. and the value is an integer (1)." ::= { hwSiteBatteryCabinetEntry 16 } hwBatteryCabinetAirConStopTemp OBJECT-TYPE SYNTAX Integer32 ( -20..80) MAX-ACCESS read-write STATUS current DESCRIPTION "Battery cabinet aircondition power off temperature point, Value range:-20 to 80 Unit: degC. and the value is an integer(1)." ::= { hwSiteBatteryCabinetEntry 17 } hwBatteryCabinetOperStatus OBJECT-TYPE SYNTAX INTEGER { normal(1), fault(2), unknown(255) } MAX-ACCESS read-only STATUS current DESCRIPTION "State of the Battery Cabinet. It is an enumeration type: If the enumeration value is 1, it indicates that the Inverter is in the normal state; If the enumeration value is 2, it indicates that the Inverter is in the fault state; If the enumeration value is 255, it indicates that the Inverter is in the unknown state; " ::= { hwSiteBatteryCabinetEntry 99 } hwBatteryCabinetRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus fo Battery Cabinet table." ::= { hwSiteBatteryCabinetEntry 100 } hwSiteEsdu OBJECT IDENTIFIER ::= { hwSiteMonitorMIBObjects 15 } hwEsduTable OBJECT-TYPE SYNTAX SEQUENCE OF HwEsduEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "/" ::= { hwSiteEsdu 2 } hwEsduEntry OBJECT-TYPE SYNTAX HwEsduEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "/" INDEX { hwEsduIndex } ::= { hwEsduTable 1 } HwEsduEntry ::= SEQUENCE { hwEsduIndex Unsigned32, hwEsduEquipId Unsigned32, hwEsduEquipName OCTET STRING, hwEsduSetDigitalInput1AlarmCondition INTEGER, hwEsduDigitalInput1OperStatus INTEGER, hwEsduSetDigitalInput2AlarmCondition INTEGER, hwEsduDigitalInput2OperStatus INTEGER, hwEsduSetDigitalInput3AlarmCondition INTEGER, hwEsduDigitalInput3OperStatus INTEGER, hwEsduSetDigitalInput4AlarmCondition INTEGER, hwEsduDigitalInput4OperStatus INTEGER, hwEsduSetDigitalInput5AlarmCondition INTEGER, hwEsduDigitalInput5OperStatus INTEGER, hwEsduSetDigitalInput6AlarmCondition INTEGER, hwEsduDigitalInput6OperStatus INTEGER, hwEsduSetDigitalInput7AlarmCondition INTEGER, hwEsduDigitalInput7OperStatus INTEGER, hwEsduSetDigitalInput8AlarmCondition INTEGER, hwEsduDigitalInput8OperStatus INTEGER, hwEsduSetDigitalInput9AlarmCondition INTEGER, hwEsduDigitalInput9OperStatus INTEGER, hwEsduSetDigitalInput10AlarmCondition INTEGER, hwEsduDigitalInput10OperStatus INTEGER, hwEsduSetDigitalInput11AlarmCondition INTEGER, hwEsduDigitalInput11OperStatus INTEGER, hwEsduSetDigitalInput12AlarmCondition INTEGER, hwEsduDigitalInput12OperStatus INTEGER, hwEsduBtempValue Integer32, hwEsduBtempOperStatus INTEGER, hwEsduTemp1Value Integer32, hwEsduTemp1HighLimit Integer32, hwEsduTemp1LowLimit Integer32, hwEsduTemp1OperStatus INTEGER, hwEsduTemp2Value Integer32, hwEsduTemp2HighLimit Integer32, hwEsduTemp2LowLimit Integer32, hwEsduTemp2OperStatus INTEGER, hwEsduDoorSensorConnect INTEGER } hwEsduIndex OBJECT-TYPE SYNTAX Unsigned32 (3428..3443) MAX-ACCESS read-only STATUS current DESCRIPTION "ESDU equip index,which value is according to the actual subject. Lines of the device list are restricted by the quantity of Battery Cabinet" ::= { hwEsduEntry 1 } hwEsduEquipId OBJECT-TYPE SYNTAX Unsigned32 (28001..28255) MAX-ACCESS read-only STATUS current DESCRIPTION "Esdu device ID. Value range: 028,001 to 028,255, in which the first digits indicate the device type and the last three digits indicate the device SN." ::= { hwEsduEntry 2 } hwEsduEquipName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..63)) MAX-ACCESS read-only STATUS current DESCRIPTION "/" ::= { hwEsduEntry 3 } hwEsduSetDigitalInput1AlarmCondition OBJECT-TYPE SYNTAX INTEGER { close(1), open(2), unknown(255) } MAX-ACCESS read-write STATUS current DESCRIPTION "Spare digital alarm state. It is an enumeration value. If the value of the node is 1, it indicates a high-tension alarm; If the value of the node is 2, it indicates a low-tension alarm; If the value of the node is 255, it indicates airconditioner status unknown." ::= { hwEsduEntry 4 } hwEsduDigitalInput1OperStatus OBJECT-TYPE SYNTAX INTEGER { normal(1), alarm(2), alarmResume(254), unknown(255) } MAX-ACCESS read-only STATUS current DESCRIPTION "It indicates the digital input operation status. It is an enumeration value. If the value of the node is 1, it indicates that the diesel of state is normal; If the value of the node is 2, it indicates that the diesel of state is alarm; If the value of the node is 254, it indicates that the diesel of state is alarmResume; If the value of the node is 255, it indicates that the diesel of state is unknown;" ::= { hwEsduEntry 5 } hwEsduSetDigitalInput2AlarmCondition OBJECT-TYPE SYNTAX INTEGER { close(1), open(2), unknown(255) } MAX-ACCESS read-write STATUS current DESCRIPTION "Spare digital alarm state. It is an enumeration value. If the value of the node is 1, it indicates a high-tension alarm; If the value of the node is 2, it indicates a low-tension alarm; If the value of the node is 255, it indicates airconditioner status unknown." ::= { hwEsduEntry 6 } hwEsduDigitalInput2OperStatus OBJECT-TYPE SYNTAX INTEGER { normal(1), alarm(2), alarmResume(254), unknown(255) } MAX-ACCESS read-only STATUS current DESCRIPTION "It indicates the digital input operation status. It is an enumeration value. If the value of the node is 1, it indicates that the diesel of state is normal; If the value of the node is 2, it indicates that the diesel of state is alarm; If the value of the node is 254, it indicates that the diesel of state is alarmResume; If the value of the node is 255, it indicates that the diesel of state is unknown;" ::= { hwEsduEntry 7 } hwEsduSetDigitalInput3AlarmCondition OBJECT-TYPE SYNTAX INTEGER { close(1), open(2), unknown(255) } MAX-ACCESS read-write STATUS current DESCRIPTION "Spare digital alarm state. It is an enumeration value. If the value of the node is 1, it indicates a high-tension alarm; If the value of the node is 2, it indicates a low-tension alarm; If the value of the node is 255, it indicates airconditioner status unknown." ::= { hwEsduEntry 8 } hwEsduDigitalInput3OperStatus OBJECT-TYPE SYNTAX INTEGER { normal(1), alarm(2), alarmResume(254), unknown(255) } MAX-ACCESS read-only STATUS current DESCRIPTION "It indicates the digital input operation status. It is an enumeration value. If the value of the node is 1, it indicates that the diesel of state is normal; If the value of the node is 2, it indicates that the diesel of state is alarm; If the value of the node is 254, it indicates that the diesel of state is alarmResume; If the value of the node is 255, it indicates that the diesel of state is unknown;" ::= { hwEsduEntry 9 } hwEsduSetDigitalInput4AlarmCondition OBJECT-TYPE SYNTAX INTEGER { close(1), open(2), unknown(255) } MAX-ACCESS read-write STATUS current DESCRIPTION "Spare digital alarm state. It is an enumeration value. If the value of the node is 1, it indicates a high-tension alarm; If the value of the node is 2, it indicates a low-tension alarm; If the value of the node is 255, it indicates airconditioner status unknown." ::= { hwEsduEntry 10 } hwEsduDigitalInput4OperStatus OBJECT-TYPE SYNTAX INTEGER { normal(1), alarm(2), alarmResume(254), unknown(255) } MAX-ACCESS read-only STATUS current DESCRIPTION "It indicates the digital input operation status. It is an enumeration value. If the value of the node is 1, it indicates that the diesel of state is normal; If the value of the node is 2, it indicates that the diesel of state is alarm; If the value of the node is 254, it indicates that the diesel of state is alarmResume; If the value of the node is 255, it indicates that the diesel of state is unknown;" ::= { hwEsduEntry 11 } hwEsduSetDigitalInput5AlarmCondition OBJECT-TYPE SYNTAX INTEGER { close(1), open(2), unknown(255) } MAX-ACCESS read-write STATUS current DESCRIPTION "Spare digital alarm state. It is an enumeration value. If the value of the node is 1, it indicates a high-tension alarm; If the value of the node is 2, it indicates a low-tension alarm; If the value of the node is 255, it indicates airconditioner status unknown." ::= { hwEsduEntry 12 } hwEsduDigitalInput5OperStatus OBJECT-TYPE SYNTAX INTEGER { normal(1), alarm(2), alarmResume(254), unknown(255) } MAX-ACCESS read-only STATUS current DESCRIPTION "It indicates the digital input operation status. It is an enumeration value. If the value of the node is 1, it indicates that the diesel of state is normal; If the value of the node is 2, it indicates that the diesel of state is alarm; If the value of the node is 254, it indicates that the diesel of state is alarmResume; If the value of the node is 255, it indicates that the diesel of state is unknown;" ::= { hwEsduEntry 13 } hwEsduSetDigitalInput6AlarmCondition OBJECT-TYPE SYNTAX INTEGER { close(1), open(2), unknown(255) } MAX-ACCESS read-write STATUS current DESCRIPTION "Spare digital alarm state. It is an enumeration value.If the value of the node is 1, it indicates a high-tension alarm;If the value of the node is 2, it indicates a low-tension alarm;If the value of the node is 255, it indicates airconditioner status unknown." ::= { hwEsduEntry 14 } hwEsduDigitalInput6OperStatus OBJECT-TYPE SYNTAX INTEGER { normal(1), alarm(2), alarmResume(254), unknown(255) } MAX-ACCESS read-only STATUS current DESCRIPTION "It indicates the digital input operation status. It is an enumeration value. If the value of the node is 1, it indicates that the diesel of state is normal; If the value of the node is 2, it indicates that the diesel of state is alarm; If the value of the node is 254, it indicates that the diesel of state is alarmResume; If the value of the node is 255, it indicates that the diesel of state is unknown;" ::= { hwEsduEntry 15 } hwEsduSetDigitalInput7AlarmCondition OBJECT-TYPE SYNTAX INTEGER { close(1), open(2), unknown(255) } MAX-ACCESS read-write STATUS current DESCRIPTION "Spare digital alarm state. It is an enumeration value. If the value of the node is 1, it indicates a high-tension alarm; If the value of the node is 2, it indicates a low-tension alarm; If the value of the node is 255, it indicates airconditioner status unknown." ::= { hwEsduEntry 16 } hwEsduDigitalInput7OperStatus OBJECT-TYPE SYNTAX INTEGER { normal(1), alarm(2), alarmResume(254), unknown(255) } MAX-ACCESS read-only STATUS current DESCRIPTION "It indicates the digital input operation status. It is an enumeration value. If the value of the node is 1, it indicates that the diesel of state is normal; If the value of the node is 2, it indicates that the diesel of state is alarm; If the value of the node is 254, it indicates that the diesel of state is alarmResume; If the value of the node is 255, it indicates that the diesel of state is unknown;" ::= { hwEsduEntry 17 } hwEsduSetDigitalInput8AlarmCondition OBJECT-TYPE SYNTAX INTEGER { close(1), open(2), unknown(255) } MAX-ACCESS read-write STATUS current DESCRIPTION "Spare digital alarm state. It is an enumeration value. If the value of the node is 1, it indicates a high-tension alarm; If the value of the node is 2, it indicates a low-tension alarm; If the value of the node is 255, it indicates airconditioner status unknown." ::= { hwEsduEntry 18 } hwEsduDigitalInput8OperStatus OBJECT-TYPE SYNTAX INTEGER { normal(1), alarm(2), alarmResume(254), unknown(255) } MAX-ACCESS read-only STATUS current DESCRIPTION "It indicates the digital input operation status. It is an enumeration value. If the value of the node is 1, it indicates that the diesel of state is normal; If the value of the node is 2, it indicates that the diesel of state is alarm; If the value of the node is 254, it indicates that the diesel of state is alarmResume; If the value of the node is 255, it indicates that the diesel of state is unknown;" ::= { hwEsduEntry 19 } hwEsduSetDigitalInput9AlarmCondition OBJECT-TYPE SYNTAX INTEGER { close(1), open(2), unknown(255) } MAX-ACCESS read-write STATUS current DESCRIPTION "Spare digital alarm state. It is an enumeration value. If the value of the node is 1, it indicates a high-tension alarm; If the value of the node is 2, it indicates a low-tension alarm; If the value of the node is 255, it indicates airconditioner status unknown." ::= { hwEsduEntry 20 } hwEsduDigitalInput9OperStatus OBJECT-TYPE SYNTAX INTEGER { normal(1), alarm(2), alarmResume(254), unknown(255) } MAX-ACCESS read-only STATUS current DESCRIPTION "It indicates the digital input operation status. It is an enumeration value. If the value of the node is 1, it indicates that the diesel of state is normal; If the value of the node is 2, it indicates that the diesel of state is alarm; If the value of the node is 254, it indicates that the diesel of state is alarmResume; If the value of the node is 255, it indicates that the diesel of state is unknown;" ::= { hwEsduEntry 21 } hwEsduSetDigitalInput10AlarmCondition OBJECT-TYPE SYNTAX INTEGER { close(1), open(2), unknown(255) } MAX-ACCESS read-write STATUS current DESCRIPTION "Spare digital alarm state. It is an enumeration value. If the value of the node is 1, it indicates a high-tension alarm; If the value of the node is 2, it indicates a low-tension alarm; If the value of the node is 255, it indicates airconditioner status unknown." ::= { hwEsduEntry 22 } hwEsduDigitalInput10OperStatus OBJECT-TYPE SYNTAX INTEGER { normal(1), alarm(2), alarmResume(254), unknown(255) } MAX-ACCESS read-only STATUS current DESCRIPTION "It indicates the digital input operation status. It is an enumeration value. If the value of the node is 1, it indicates that the diesel of state is normal; If the value of the node is 2, it indicates that the diesel of state is alarm; If the value of the node is 254, it indicates that the diesel of state is alarmResume; If the value of the node is 255, it indicates that the diesel of state is unknown;" ::= { hwEsduEntry 23 } hwEsduSetDigitalInput11AlarmCondition OBJECT-TYPE SYNTAX INTEGER { close(1), open(2), unknown(255) } MAX-ACCESS read-write STATUS current DESCRIPTION "Spare digital alarm state. It is an enumeration value. If the value of the node is 1, it indicates a high-tension alarm; If the value of the node is 2, it indicates a low-tension alarm; If the value of the node is 255, it indicates airconditioner status unknown." ::= { hwEsduEntry 24 } hwEsduDigitalInput11OperStatus OBJECT-TYPE SYNTAX INTEGER { normal(1), alarm(2), alarmResume(254), unknown(255) } MAX-ACCESS read-only STATUS current DESCRIPTION "It indicates the digital input operation status. It is an enumeration value. If the value of the node is 1, it indicates that the diesel of state is normal; If the value of the node is 2, it indicates that the diesel of state is alarm; If the value of the node is 254, it indicates that the diesel of state is alarmResume; If the value of the node is 255, it indicates that the diesel of state is unknown;" ::= { hwEsduEntry 25 } hwEsduSetDigitalInput12AlarmCondition OBJECT-TYPE SYNTAX INTEGER { close(1), open(2), unknown(255) } MAX-ACCESS read-write STATUS current DESCRIPTION "Spare digital alarm state. It is an enumeration value. If the value of the node is 1, it indicates a high-tension alarm; If the value of the node is 2, it indicates a low-tension alarm; If the value of the node is 255, it indicates airconditioner status unknown." ::= { hwEsduEntry 26 } hwEsduDigitalInput12OperStatus OBJECT-TYPE SYNTAX INTEGER { normal(1), alarm(2), alarmResume(254), unknown(255) } MAX-ACCESS read-only STATUS current DESCRIPTION "It indicates the digital input operation status. It is an enumeration value. If the value of the node is 1, it indicates that the diesel of state is normal; If the value of the node is 2, it indicates that the diesel of state is alarm; If the value of the node is 254, it indicates that the diesel of state is alarmResume; If the value of the node is 255, it indicates that the diesel of state is unknown;" ::= { hwEsduEntry 27 } hwEsduBtempValue OBJECT-TYPE SYNTAX Integer32 ( -40..80) MAX-ACCESS read-only STATUS current DESCRIPTION "Temp1. It is an environment parameter collected in real time. Value range: -40 to +80, Unit: degC and the value is an integer (1). If the value is -1024, it indicates that the temperature sensor is not configured." ::= { hwEsduEntry 28 } hwEsduBtempOperStatus OBJECT-TYPE SYNTAX INTEGER { normal(1), tempHigh(2), tempLow(3), notInslot(4), tempFault(5), alarmResume(254), unknown(255) } MAX-ACCESS read-only STATUS current DESCRIPTION "State of the site temp1 sensor. It is an enumeration type: If the enumeration value is 1, it indicates that the site temp1 sensor is in the normal state; If the enumeration value is 2, it indicates that the temp1 sensor is over temperature; If the enumeration value is 3, it indicates that the temp1 sensor is under temperature; If the enumeration value is 4, it indicates that the temp1 sensor is not in slot; If the enumeration value is 5, it indicates that the temp1 sensor is fault; If the enumeration value is 254, it indicates that temp1 alarm resume; If the enumeration value is 255, it indicates temp1 sensor operation status unknown." ::= { hwEsduEntry 31 } hwEsduTemp1Value OBJECT-TYPE SYNTAX Integer32 ( -40..80) MAX-ACCESS read-only STATUS current DESCRIPTION "Temp1. It is an environment parameter collected in real time. Value range: -40 to +80, units: centigrade (degC), and the value is an integer (1). If the value is -1024, it indicates that the temperature sensor is not configured." ::= { hwEsduEntry 32 } hwEsduTemp1HighLimit OBJECT-TYPE SYNTAX Integer32 (25..80) MAX-ACCESS read-write STATUS current DESCRIPTION "Upper threshold of the temp1 alarm, can be configured by users. Value range: 25 to 80, units: centigrade (degC), and the value is an integer (1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwEsduEntry 33 } hwEsduTemp1LowLimit OBJECT-TYPE SYNTAX Integer32 ( -20..20) MAX-ACCESS read-write STATUS current DESCRIPTION "Lower threshold of the temp1 alarm, can be configured by users. Value range: -20 to 20, units: centigrade (degC), and the value is an integer (1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwEsduEntry 34 } hwEsduTemp1OperStatus OBJECT-TYPE SYNTAX INTEGER { normal(1), tempHigh(2), tempLow(3), notInslot(4), tempFault(5), alarmResume(254), unknown(255) } MAX-ACCESS read-only STATUS current DESCRIPTION "State of the site temp1 sensor. It is an enumeration type: If the enumeration value is 1, it indicates that the site temp1 sensor is in the normal state; If the enumeration value is 2, it indicates that the temp1 sensor is over temperature; If the enumeration value is 3, it indicates that the temp1 sensor is under temperature; If the enumeration value is 4, it indicates that the temp1 sensor is not in slot; If the enumeration value is 5, it indicates that the temp1 sensor is fault; If the enumeration value is 254, it indicates that temp1 alarm resume; If the enumeration value is 255, it indicates temp1 sensor operation status unknown." ::= { hwEsduEntry 35 } hwEsduTemp2Value OBJECT-TYPE SYNTAX Integer32 ( -40..80) MAX-ACCESS read-only STATUS current DESCRIPTION "Temp2. It is an environment parameter collected in real time. Value range: -40 to +80, units: centigrade (degC), and the value is an integer (1). If the value is -1024, it indicates that the temperature sensor is not configured." ::= { hwEsduEntry 36 } hwEsduTemp2HighLimit OBJECT-TYPE SYNTAX Integer32 (25..80) MAX-ACCESS read-write STATUS current DESCRIPTION "Upper threshold of the temp2 alarm, can be configured by users. Value range: 25 to 80, units: centigrade (degC), and the value is an integer (1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwEsduEntry 37 } hwEsduTemp2LowLimit OBJECT-TYPE SYNTAX Integer32 ( -20..20) MAX-ACCESS read-write STATUS current DESCRIPTION "Lower threshold of the temp2 alarm, can be configured by users. Value range: -20 to 20, units: centigrade (degC), and the value is an integer (1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwEsduEntry 38 } hwEsduTemp2OperStatus OBJECT-TYPE SYNTAX INTEGER { normal(1), tempHigh(2), tempLow(3), notInslot(4), tempFault(5), alarmResume(254), unknown(255) } MAX-ACCESS read-only STATUS current DESCRIPTION "State of the site temp2 sensor. It is an enumeration type: If the enumeration value is 1, it indicates that the site temp2 sensor is in the normal state; If the enumeration value is 2, it indicates that the temp2 sensor is over temperature; If the enumeration value is 3, it indicates that the temp2 sensor is under temperature; If the enumeration value is 4, it indicates that the temp2 sensor is not in slot; If the enumeration value is 5, it indicates that the temp2 sensor is fault; If the enumeration value is 254, it indicates that temp2 alarm resume; If the enumeration value is 255, it indicates temp2 sensor operation status unknown." ::= { hwEsduEntry 39 } hwEsduDoorSensorConnect OBJECT-TYPE SYNTAX INTEGER { disable(1),enable(2),unknown(255) } MAX-ACCESS read-write STATUS current DESCRIPTION "Door Sensor Connected; It is an enumeration value, and can be configured. If the enumeration value is 1, it indicates Door Sensor is disable; If the enumeration value is 2, it indicates Door Sensor is enalble; If the enumeration value is 255, it indicates timed boost charge is unknown. " ::= { hwEsduEntry 40 } hwSiteIbox OBJECT IDENTIFIER ::= { hwSiteMonitorMIBObjects 20 } hwSiteIboxTable OBJECT-TYPE SYNTAX SEQUENCE OF HwSiteIboxEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "/" ::= { hwSiteIbox 1 } hwSiteIboxEntry OBJECT-TYPE SYNTAX HwSiteIboxEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "/" INDEX { hwIboxIndex } ::= { hwSiteIboxTable 1 } HwSiteIboxEntry ::= SEQUENCE { hwIboxIndex Unsigned32, hwIboxEquipId Unsigned32, hwIboxEquipName OCTET STRING, hwIbatEquipNum Unsigned32 } hwIboxIndex OBJECT-TYPE SYNTAX Unsigned32 (560..575) MAX-ACCESS read-only STATUS current DESCRIPTION "ibox table index,which value is according to the actual subject. Lines of the device list are restricted by the quantity of ibox" ::= { hwSiteIboxEntry 1 } hwIboxEquipId OBJECT-TYPE SYNTAX Unsigned32 (29001..29255) MAX-ACCESS read-only STATUS current DESCRIPTION "ibox device ID. Value range: 029'001 to 029'255, in which the first digits indicate the device type and the last three digits indicate the device SN." ::= { hwSiteIboxEntry 2 } hwIboxEquipName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..63)) MAX-ACCESS read-only STATUS current DESCRIPTION "Ibox name, of the character string type, is used to specify battery cabinet. Users can configure it. Otherwise, the configured character can not be any other languages except English. " ::= { hwSiteIboxEntry 3 } hwIbatEquipNum OBJECT-TYPE SYNTAX Unsigned32 (0..96) MAX-ACCESS read-write STATUS current DESCRIPTION "Number of Batteries. Value range: 0 to 96, and the value is an integer (1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid. " ::= { hwSiteIboxEntry 4 } hwSiteIbat OBJECT IDENTIFIER ::= { hwSiteMonitorMIBObjects 21 } hwSiteIbatTable OBJECT-TYPE SYNTAX SEQUENCE OF HwSiteIbatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "/" ::= { hwSiteIbat 1 } hwSiteIbatEntry OBJECT-TYPE SYNTAX HwSiteIbatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "/" INDEX { hwIbatIndex } ::= { hwSiteIbatTable 1 } HwSiteIbatEntry ::= SEQUENCE { hwIbatIndex Unsigned32, hwIbatEquipId Unsigned32, hwIbatEquipName OCTET STRING, hwIbatTemperature Integer32, hwIbatVoltage Unsigned32, hwIbatResistance Unsigned32 } hwIbatIndex OBJECT-TYPE SYNTAX Unsigned32 (24576..26112) MAX-ACCESS read-only STATUS current DESCRIPTION "ibox table index,which value is according to the actual subject. Lines of the device list are restricted by the quantity of ibox" ::= { hwSiteIbatEntry 1 } hwIbatEquipId OBJECT-TYPE SYNTAX Unsigned32 (30001..31537) MAX-ACCESS read-only STATUS current DESCRIPTION "ibat device ID. Value range: 030'001 to 031'537, in which the first digits indicate the device type and the last three digits indicate the device SN." ::= { hwSiteIbatEntry 2 } hwIbatEquipName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..63)) MAX-ACCESS read-only STATUS current DESCRIPTION "Ibat name, of the character string type, is used to specify battery cabinet. Users can configure it. Otherwise, the configured character can not be any other languages except English. " ::= { hwSiteIbatEntry 3 } hwIbatTemperature OBJECT-TYPE SYNTAX Integer32 (-50..125) MAX-ACCESS read-only STATUS current DESCRIPTION "Ibat temperature. It is a ibat parameter collected in real time. Value range: -50 to +125, unit: centigrade (degC), and the value is an integer (1). If the value is 2147483647(0x7FFFFFFF), it indicates that ibox temperature sensor is not configured. " ::= { hwSiteIbatEntry 4 } hwIbatVoltage OBJECT-TYPE SYNTAX Unsigned32 (0..1000) MAX-ACCESS read-only STATUS current DESCRIPTION "Ibat Voltage of the ibat. It is an inherent attribute. Value range: 0 to 100, Units: V, and the value is accurate to one decimal place (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid. " ::= { hwSiteIbatEntry 5 } hwIbatResistance OBJECT-TYPE SYNTAX Unsigned32 (0..100000000) MAX-ACCESS read-only STATUS current DESCRIPTION "IbatResistance Value range: 0 to 1000000, units: (mohm), and the value is accurate to two decimal place (.01). " ::= { hwSiteIbatEntry 6 } hwSiteCommExBoard OBJECT IDENTIFIER ::= { hwSiteMonitorMIBObjects 22 } hwSiteCommExBoardTable OBJECT-TYPE SYNTAX SEQUENCE OF HwSiteCommExBoardEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "/" ::= { hwSiteCommExBoard 1 } hwSiteCommExBoardEntry OBJECT-TYPE SYNTAX HwSiteCommExBoardEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "/" INDEX { hwCommExBoardIndex } ::= { hwSiteCommExBoardTable 1 } HwSiteCommExBoardEntry ::= SEQUENCE { hwCommExBoardIndex Unsigned32, hwCommExBoardEquipId Unsigned32, hwCommExBoardEquipName OCTET STRING } hwCommExBoardIndex OBJECT-TYPE SYNTAX Unsigned32 (1297..1301) MAX-ACCESS read-only STATUS current DESCRIPTION "Communication Expansion Board table index,which value is according to the actual subject. Lines of the device list are restricted by the quantity of Communication Expansion Board" ::= { hwSiteCommExBoardEntry 1 } hwCommExBoardEquipId OBJECT-TYPE SYNTAX Unsigned32 (32266..33049) MAX-ACCESS read-only STATUS current DESCRIPTION "Communication Expansion Board device ID. Value range: 032,256 to 033,249, in which the first digits indicate the device type and the last three digits indicate the device SN." ::= { hwSiteCommExBoardEntry 2 } hwCommExBoardEquipName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..63)) MAX-ACCESS read-only STATUS current DESCRIPTION "Communication Expansion Board name, of the character string type, is used to specify battery cabinet. Users can configure it. Otherwise, the configured character can not be any other languages except English. " ::= { hwSiteCommExBoardEntry 3 } hwSiteDGCommExBoard OBJECT IDENTIFIER ::= { hwSiteMonitorMIBObjects 23 } hwSiteDGCommExBoardTable OBJECT-TYPE SYNTAX SEQUENCE OF HwSiteDGCommExBoardEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "/" ::= { hwSiteDGCommExBoard 1 } hwSiteDGCommExBoardEntry OBJECT-TYPE SYNTAX HwSiteDGCommExBoardEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "/" INDEX { hwDGCommExBoardIndex } ::= { hwSiteDGCommExBoardTable 1 } HwSiteDGCommExBoardEntry ::= SEQUENCE { hwDGCommExBoardIndex Unsigned32, hwDGCommExBoardEquipId Unsigned32, hwDGCommExBoardEquipName OCTET STRING } hwDGCommExBoardIndex OBJECT-TYPE SYNTAX Unsigned32 (2185) MAX-ACCESS read-only STATUS current DESCRIPTION "DG Communication Expansion Board table index,which value is according to the actual subject. Lines of the device list are restricted by the quantity of DG Communication Expansion Board" ::= { hwSiteDGCommExBoardEntry 1 } hwDGCommExBoardEquipId OBJECT-TYPE SYNTAX Unsigned32 (34001) MAX-ACCESS read-only STATUS current DESCRIPTION "DG Communication Expansion Board device ID. Value range: 034'001, in which the first digits indicate the device type and the last three digits indicate the device SN." ::= { hwSiteDGCommExBoardEntry 2 } hwDGCommExBoardEquipName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..63)) MAX-ACCESS read-only STATUS current DESCRIPTION "DG Communication Expansion Board name, of the character string type, is used to specify battery cabinet. Users can configure it. Otherwise, the configured character can not be any other languages except English. " ::= { hwSiteDGCommExBoardEntry 3 } hwAcbGroupEquip OBJECT IDENTIFIER ::= { hwSiteMonitorMIBObjects 17 } hwAcbGroupSampTable OBJECT-TYPE SYNTAX SEQUENCE OF HwAcbGroupSampEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "/" ::= { hwAcbGroupEquip 1 } hwAcbGroupSampEntry OBJECT-TYPE SYNTAX HwAcbGroupSampEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "/" INDEX { hwAcbGroupIndex } ::= { hwAcbGroupSampTable 1 } HwAcbGroupSampEntry ::= SEQUENCE { hwAcbGroupIndex Unsigned32, hwAcbGroupEquipId Unsigned32, hwAcbGroupEquipName OCTET STRING, hwAcbGroupBatRunningState INTEGER, hwAcbGroupBatVolt Unsigned32, hwAcbGroupBatCurr Integer32, hwAcbGroupTotalCapacity Unsigned32, hwAcbGroupTotalRemainCapacity Unsigned32, hwAcbGroupTemperature Integer32, hwAcbGroupBackupTime Unsigned32, hwAcbGroupEsmuCommNum Unsigned32, hwAcbGroupBatSoh Unsigned32, hwAcbGroupTotalDischargeDepth Unsigned32 } hwAcbGroupIndex OBJECT-TYPE SYNTAX Unsigned32 (0..256) MAX-ACCESS read-only STATUS current DESCRIPTION "The battery group equip Index." ::= { hwAcbGroupSampEntry 1 } hwAcbGroupEquipId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The battery group equip ID no." ::= { hwAcbGroupSampEntry 2 } hwAcbGroupEquipName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The battery group equip name." ::= { hwAcbGroupSampEntry 3 } hwAcbGroupBatRunningState OBJECT-TYPE SYNTAX INTEGER { firstOn(1), powerOff(2), float(3), equal(4), dicharge(5), charge(6), test(7), unknown(255) } MAX-ACCESS read-only STATUS current DESCRIPTION "State of the Battery group unit running state. It is an enumeration type: If the enumeration value is 1, it indicates the Battery is first on line, If the enumeration value is 2, it indicates that Battery power off, If the enumeration value is 3, it indicates that Battery is on float charging, If the enumeration value is 4, it indicates that Battery is on equal charging, If the enumeration value is 5, it indicates that Battery is on discharge, If the enumeration value is 6, it indicates that Battery is on charge, If the enumeration value is 7, it indicates that Battery is on test, If the enumeration value is 255, it indicates Battery uint operation status unknown. " ::= { hwAcbGroupSampEntry 4 } hwAcbGroupBatVolt OBJECT-TYPE SYNTAX Unsigned32 (0..1000) MAX-ACCESS read-only STATUS current DESCRIPTION "The battery volt; Value range: 0 to 100, units: V. and the value is accurate to one decimal place (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwAcbGroupSampEntry 5 } hwAcbGroupBatCurr OBJECT-TYPE SYNTAX Integer32 (-40000..40000) MAX-ACCESS read-only STATUS current DESCRIPTION "The battery current; Value range: -4000 to 4000, units: A. and the value is accurate to one decimal place (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwAcbGroupSampEntry 6 } hwAcbGroupTotalCapacity OBJECT-TYPE SYNTAX Unsigned32 (0..100000) MAX-ACCESS read-only STATUS current DESCRIPTION "The battery total capacity; Value range: 0 to 10000, units: Ah. and the value is accurate to one decimal place (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwAcbGroupSampEntry 7 } hwAcbGroupTotalRemainCapacity OBJECT-TYPE SYNTAX Unsigned32 (0..1000) MAX-ACCESS read-only STATUS current DESCRIPTION "The battery total remain capacity; Value range:0 to 100, units: %. and the value is accurate to one decimal place (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwAcbGroupSampEntry 8 } hwAcbGroupTemperature OBJECT-TYPE SYNTAX Integer32 (-500..1000) MAX-ACCESS read-only STATUS current DESCRIPTION "The battery temperature; Value range:-50 to 100, units: degC. and the value is accurate to one decimal place (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwAcbGroupSampEntry 9 } hwAcbGroupBackupTime OBJECT-TYPE SYNTAX Unsigned32 (0..2560) MAX-ACCESS read-only STATUS current DESCRIPTION "The battery backup time; Value range: 0 to 256, units: h. and the value is accurate to one decimal place (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwAcbGroupSampEntry 11 } hwAcbGroupEsmuCommNum OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "The esmu communicate number, Value range: 0 to 100. If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwAcbGroupSampEntry 12 } hwAcbGroupBatSoh OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "The battery soh: 0 to 100, units: %. and the value is accurate to one decimal place (1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwAcbGroupSampEntry 13 } hwAcbGroupTotalDischargeDepth OBJECT-TYPE SYNTAX Unsigned32 (10..1000) MAX-ACCESS read-only STATUS current DESCRIPTION "The battery total discharge depth, units: %. and the value is accurate to one decimal place (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwAcbGroupSampEntry 22 } hwAcbGroupSetTable OBJECT-TYPE SYNTAX SEQUENCE OF HwAcbGroupSetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "/" ::= { hwAcbGroupEquip 2 } hwAcbGroupSetEntry OBJECT-TYPE SYNTAX HwAcbGroupSetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "/" INDEX { hwAcbGroupCellNum } ::= { hwAcbGroupSetTable 1 } HwAcbGroupSetEntry ::= SEQUENCE { hwAcbGroupCellNum Unsigned32, hwAcbGroupSetTotalCapacity Unsigned32, hwAcbGroupEqualVolt Unsigned32, hwAcbGroupFloatVolt Unsigned32, hwAcbGroupChargeCurrLimitThr Unsigned32, hwAcbGroupOverCurThr Unsigned32, hwAcbGroupHighTempThr Unsigned32, hwAcbGroupLowTempThr Integer32, hwAcbGroupDodToAcidBattery Unsigned32, hwAcbGroupDefaultChargeCurrLimitThr Unsigned32 } hwAcbGroupCellNum OBJECT-TYPE SYNTAX Unsigned32 (1..32) MAX-ACCESS read-only STATUS current DESCRIPTION "Battery cell number. Value range: 1 to 32, If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwAcbGroupSetEntry 5 } hwAcbGroupSetTotalCapacity OBJECT-TYPE SYNTAX Unsigned32 (0..10000) MAX-ACCESS read-only STATUS current DESCRIPTION "The battery total capacity, units: wh. and the value is accurate to one decimal place (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwAcbGroupSetEntry 6 } hwAcbGroupEqualVolt OBJECT-TYPE SYNTAX Unsigned32 (420..580) MAX-ACCESS read-write STATUS current DESCRIPTION "Battery equalcharge voltage, can be configued by users. Value range: 42 to 58, units: v, and the value is accurate to one decimal space (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid. " ::= { hwAcbGroupSetEntry 11 } hwAcbGroupFloatVolt OBJECT-TYPE SYNTAX Unsigned32 (420..580) MAX-ACCESS read-write STATUS current DESCRIPTION "Battery floatcharge voltage, can be configued by users. Value range: 42 to 58, units: v, and the value is accurate to one decimal space (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid. " ::= { hwAcbGroupSetEntry 12 } hwAcbGroupChargeCurrLimitThr OBJECT-TYPE SYNTAX Unsigned32 (5..200) MAX-ACCESS read-write STATUS current DESCRIPTION "Battery charge limited threhold , can be configued by users. Value range: 0.05 to 2, units: C10, and the value is accurate to two decimal space (.01). If the setting value is beyond the current support range, it will fail. If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwAcbGroupSetEntry 13 } hwAcbGroupOverCurThr OBJECT-TYPE SYNTAX Unsigned32 (15..120) MAX-ACCESS read-write STATUS current DESCRIPTION "Battery over charge current limited threhold , can be configued by users. Value range: 0.15 to 1.2, units: C10, and the value is accurate to two decimal space (.01). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwAcbGroupSetEntry 14 } hwAcbGroupHighTempThr OBJECT-TYPE SYNTAX Unsigned32 (35..70) MAX-ACCESS read-write STATUS current DESCRIPTION "Upper threshold of the environment temperature alarm, can be configured by users. Value range: 35 to 70, units: centigrade (¡ãC), and the value is an integer (1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwAcbGroupSetEntry 21 } hwAcbGroupLowTempThr OBJECT-TYPE SYNTAX Integer32 (-50..0) MAX-ACCESS read-write STATUS current DESCRIPTION "Lower threshold of the environment temperature alarm, can be configured by users. Value range: -50 to 0, units: centigrade (degC), and the value is an integer (1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwAcbGroupSetEntry 22 } hwAcbGroupDodToAcidBattery OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "The lithium battery discharge depth for Acid Battery running; ,units: %." ::= { hwAcbGroupSetEntry 26 } hwAcbGroupDefaultChargeCurrLimitThr OBJECT-TYPE SYNTAX Unsigned32 (5..200) MAX-ACCESS read-write STATUS current DESCRIPTION "Battery default charge limited threhold , can be configued by users. Value range: 0.05 to 2, units: C10, and the value is accurate to two decimal space (.01). If the setting value is beyond the current support range, it will fail. If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid. " ::= { hwAcbGroupSetEntry 27 } hwAcbEquip OBJECT IDENTIFIER ::= { hwSiteMonitorMIBObjects 18 } hwAcbBaseTable OBJECT-TYPE SYNTAX SEQUENCE OF HwAcbBaseEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "/" ::= { hwAcbEquip 1 } hwAcbBaseEntry OBJECT-TYPE SYNTAX HwAcbBaseEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "/" INDEX { hwAcbIndex } ::= { hwAcbBaseTable 1 } HwAcbBaseEntry ::= SEQUENCE { hwAcbIndex Unsigned32, hwAcbEquipId Unsigned32, hwAcbEquipName OCTET STRING, hwAcbEquipAddr Unsigned32, hwAcbSoftVar OCTET STRING } hwAcbIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The battery equip Index." ::= { hwAcbBaseEntry 1 } hwAcbEquipId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The battery equip ID no." ::= { hwAcbBaseEntry 2 } hwAcbEquipName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "The battery equip name." ::= { hwAcbBaseEntry 3 } hwAcbEquipAddr OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The battery communica address." ::= { hwAcbBaseEntry 4 } hwAcbSoftVar OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The Battery software version." ::= { hwAcbBaseEntry 5 } hwAcbSampTable OBJECT-TYPE SYNTAX SEQUENCE OF HwAcbSampEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "/" ::= { hwAcbEquip 2 } hwAcbSampEntry OBJECT-TYPE SYNTAX HwAcbSampEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "/" INDEX { hwAcbBatVolt } ::= { hwAcbSampTable 1 } HwAcbSampEntry ::= SEQUENCE { hwAcbBatVolt Unsigned32, hwAcbBatCurr Integer32, hwAcbRunningStatus INTEGER, hwAcbBatSoh Unsigned32, hwAcbBatCapacity Unsigned32, hwAcbBatCell1Volt Unsigned32, hwAcbBatCell2Volt Unsigned32, hwAcbBatCell3Volt Unsigned32, hwAcbBatCell4Volt Unsigned32, hwAcbBatCell5Volt Unsigned32, hwAcbBatCell6Volt Unsigned32, hwAcbBatCell7Volt Unsigned32, hwAcbBatCell8Volt Unsigned32, hwAcbBatCell9Volt Unsigned32, hwAcbBatCell10Volt Unsigned32, hwAcbBatCell11Volt Unsigned32, hwAcbBatCell12Volt Unsigned32, hwAcbBatCell13Volt Unsigned32, hwAcbBatCell14Volt Unsigned32, hwAcbBatCell15Volt Unsigned32, hwAcbBatCell16Volt Unsigned32, hwAcbBatCell17Temp Integer32, hwAcbBatCell18Temp Integer32, hwAcbBatCell19Temp Integer32, hwAcbBatCell20Temp Integer32, hwAcbBatCell21Temp Integer32, hwAcbBatCell22Temp Integer32, hwAcbBatCell1Temp Integer32, hwAcbBatCell2Temp Integer32, hwAcbBatCell3Temp Integer32, hwAcbBatCell4Temp Integer32, hwAcbBatCell5Temp Integer32, hwAcbBatCell6Temp Integer32, hwAcbBatCell7Temp Integer32, hwAcbBatCell8Temp Integer32, hwAcbBatCell9Temp Integer32, hwAcbBatCell10Temp Integer32, hwAcbBatCell11Temp Integer32, hwAcbBatCell12Temp Integer32, hwAcbBatCell13Temp Integer32, hwAcbBatCell14Temp Integer32, hwAcbBatCell15Temp Integer32, hwAcbBatCell16Temp Integer32, hwAcbBatCell17Volt Unsigned32, hwAcbBatCell18Volt Unsigned32, hwAcbBatCell19Volt Unsigned32, hwAcbBatCell20Volt Unsigned32, hwAcbBatCell21Volt Unsigned32, hwAcbBatCell22Volt Unsigned32 } hwAcbBatVolt OBJECT-TYPE SYNTAX Unsigned32 (0..600) MAX-ACCESS read-only STATUS current DESCRIPTION "voltage of the battery. It indicates the real-time statistics of the battery on the site. Value range: 0 to 60, unit: V, and the value is accurate to one decimal place (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwAcbSampEntry 1 } hwAcbBatCurr OBJECT-TYPE SYNTAX Integer32 (-2000..2000) MAX-ACCESS read-only STATUS current DESCRIPTION "Current of the battery. It indicates the real-time statistics of the battery on the site. Value range: -200 to 200, unit: A, and the value is accurate to one decimal place (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwAcbSampEntry 2 } hwAcbRunningStatus OBJECT-TYPE SYNTAX INTEGER { offline(1), online(2), sleep(3), disconnect(4), charge(5), discharge(6), standby(7), unknown(255) } MAX-ACCESS read-only STATUS current DESCRIPTION "Battery charging state, indicates the charging and discharging information about the battery group. It is an enumeration type. If the enumeration value is 1, it indicates a battery in the Offline state. If the enumeration value is 2, it indicates a battery in the online state. If the enumeration value is 3, it indicates a battery in the Sleep state. If the enumeration value is 4, it indicates a battery in the disconnect state. If the enumeration value is 5, it indicates a battery in the Charge state. If the enumeration value is 6, it indicates a battery in the Discharge state. If the enumeration value is 7, it indicates a battery in the Standby state. If the enumeration value is 255, it indicates a battery group in the unknown state." ::= { hwAcbSampEntry 3 } hwAcbBatSoh OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Soh of the battery. It indicates the real-time statistics of the battery on the site. Value range: 0 to 100, unit: %, and the value is accurate to two decimal place (1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwAcbSampEntry 4 } hwAcbBatCapacity OBJECT-TYPE SYNTAX Unsigned32 (0..100000) MAX-ACCESS read-only STATUS current DESCRIPTION "Capacity of the battery. Value range: 0 to 10000, unit: Ah, and the value is accurate to two decimal place (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwAcbSampEntry 5 } hwAcbBatCell1Volt OBJECT-TYPE SYNTAX Unsigned32 (0..50) MAX-ACCESS read-only STATUS current DESCRIPTION "Voltage of the battery cell. It indicates the real-time statistics of the battery on the site. Value range: 0 to 5, unit: V, and the value is accurate to one decimal place (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwAcbSampEntry 6 } hwAcbBatCell2Volt OBJECT-TYPE SYNTAX Unsigned32 (0..50) MAX-ACCESS read-only STATUS current DESCRIPTION "Voltage of the battery cell. It indicates the real-time statistics of the battery on the site. Value range: 0 to 5, unit: V, and the value is accurate to one decimal place (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwAcbSampEntry 7 } hwAcbBatCell3Volt OBJECT-TYPE SYNTAX Unsigned32 (0..50) MAX-ACCESS read-only STATUS current DESCRIPTION "Voltage of the battery cell. It indicates the real-time statistics of the battery on the site. Value range: 0 to 5, unit: V, and the value is accurate to one decimal place (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwAcbSampEntry 8 } hwAcbBatCell4Volt OBJECT-TYPE SYNTAX Unsigned32 (0..50) MAX-ACCESS read-only STATUS current DESCRIPTION "Voltage of the battery cell. It indicates the real-time statistics of the battery on the site. Value range: 0 to 5, unit: V, and the value is accurate to one decimal place (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwAcbSampEntry 9 } hwAcbBatCell5Volt OBJECT-TYPE SYNTAX Unsigned32 (0..50) MAX-ACCESS read-only STATUS current DESCRIPTION "Voltage of the battery cell. It indicates the real-time statistics of the battery on the site. Value range: 0 to 5, unit: V, and the value is accurate to one decimal place (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwAcbSampEntry 10 } hwAcbBatCell6Volt OBJECT-TYPE SYNTAX Unsigned32 (0..50) MAX-ACCESS read-only STATUS current DESCRIPTION "Voltage of the battery cell. It indicates the real-time statistics of the battery on the site. Value range: 0 to 5, unit: V, and the value is accurate to one decimal place (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwAcbSampEntry 11 } hwAcbBatCell7Volt OBJECT-TYPE SYNTAX Unsigned32 (0..50) MAX-ACCESS read-only STATUS current DESCRIPTION "Voltage of the battery cell. It indicates the real-time statistics of the battery on the site. Value range: 0 to 5, unit: V, and the value is accurate to one decimal place (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwAcbSampEntry 12 } hwAcbBatCell8Volt OBJECT-TYPE SYNTAX Unsigned32 (0..50) MAX-ACCESS read-only STATUS current DESCRIPTION "Voltage of the battery cell. It indicates the real-time statistics of the battery on the site. Value range: 0 to 5, unit: V, and the value is accurate to one decimal place (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwAcbSampEntry 13 } hwAcbBatCell9Volt OBJECT-TYPE SYNTAX Unsigned32 (0..50) MAX-ACCESS read-only STATUS current DESCRIPTION "Voltage of the battery cell. It indicates the real-time statistics of the battery on the site. Value range: 0 to 5, unit: V, and the value is accurate to one decimal place (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwAcbSampEntry 14 } hwAcbBatCell10Volt OBJECT-TYPE SYNTAX Unsigned32 (0..50) MAX-ACCESS read-only STATUS current DESCRIPTION "Voltage of the battery cell. It indicates the real-time statistics of the battery on the site. Value range: 0 to 5, unit: V, and the value is accurate to one decimal place (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwAcbSampEntry 15 } hwAcbBatCell11Volt OBJECT-TYPE SYNTAX Unsigned32 (0..50) MAX-ACCESS read-only STATUS current DESCRIPTION "Voltage of the battery cell. It indicates the real-time statistics of the battery on the site. Value range: 0 to 5, unit: V, and the value is accurate to one decimal place (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwAcbSampEntry 16 } hwAcbBatCell12Volt OBJECT-TYPE SYNTAX Unsigned32 (0..50) MAX-ACCESS read-only STATUS current DESCRIPTION "Voltage of the battery cell. It indicates the real-time statistics of the battery on the site. Value range: 0 to 5, unit: V, and the value is accurate to one decimal place (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwAcbSampEntry 17 } hwAcbBatCell13Volt OBJECT-TYPE SYNTAX Unsigned32 (0..50) MAX-ACCESS read-only STATUS current DESCRIPTION "Voltage of the battery cell. It indicates the real-time statistics of the battery on the site. Value range: 0 to 5, unit: V, and the value is accurate to one decimal place (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwAcbSampEntry 18 } hwAcbBatCell14Volt OBJECT-TYPE SYNTAX Unsigned32 (0..50) MAX-ACCESS read-only STATUS current DESCRIPTION "Voltage of the battery cell. It indicates the real-time statistics of the battery on the site. Value range: 0 to 5, unit: V, and the value is accurate to one decimal place (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwAcbSampEntry 19 } hwAcbBatCell15Volt OBJECT-TYPE SYNTAX Unsigned32 (0..50) MAX-ACCESS read-only STATUS current DESCRIPTION "Voltage of the battery cell. It indicates the real-time statistics of the battery on the site. Value range: 0 to 5, unit: V, and the value is accurate to one decimal place (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwAcbSampEntry 20 } hwAcbBatCell16Volt OBJECT-TYPE SYNTAX Unsigned32 (0..50) MAX-ACCESS read-only STATUS current DESCRIPTION "Voltage of the battery cell. It indicates the real-time statistics of the battery on the site. Value range: 0 to 5, unit: V, and the value is accurate to one decimal place (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwAcbSampEntry 21 } hwAcbBatCell17Temp OBJECT-TYPE SYNTAX Integer32 (-1000..1000) MAX-ACCESS read-only STATUS current DESCRIPTION "Temperature of the battery cell. It indicates the real-time statistics of the battery on the site. Value range: -100 to 100, units: centigrade(degC), and the value is accurate to one decimal place (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwAcbSampEntry 38 } hwAcbBatCell18Temp OBJECT-TYPE SYNTAX Integer32 (-1000..1000) MAX-ACCESS read-only STATUS current DESCRIPTION "Temperature of the battery cell. It indicates the real-time statistics of the battery on the site. Value range: -100 to 100, units: centigrade(degC), and the value is accurate to one decimal place (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwAcbSampEntry 39 } hwAcbBatCell19Temp OBJECT-TYPE SYNTAX Integer32 (-1000..1000) MAX-ACCESS read-only STATUS current DESCRIPTION "Temperature of the battery cell. It indicates the real-time statistics of the battery on the site. Value range: -100 to 100, units: centigrade(degC), and the value is accurate to one decimal place (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwAcbSampEntry 40 } hwAcbBatCell20Temp OBJECT-TYPE SYNTAX Integer32 (-1000..1000) MAX-ACCESS read-only STATUS current DESCRIPTION "Temperature of the battery cell. It indicates the real-time statistics of the battery on the site. Value range: -100 to 100, units: centigrade(degC), and the value is accurate to one decimal place (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwAcbSampEntry 41 } hwAcbBatCell21Temp OBJECT-TYPE SYNTAX Integer32 (-1000..1000) MAX-ACCESS read-only STATUS current DESCRIPTION "Temperature of the battery cell. It indicates the real-time statistics of the battery on the site. Value range: -100 to 100, units: centigrade(degC), and the value is accurate to one decimal place (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwAcbSampEntry 42 } hwAcbBatCell22Temp OBJECT-TYPE SYNTAX Integer32 (-1000..1000) MAX-ACCESS read-only STATUS current DESCRIPTION "Temperature of the battery cell. It indicates the real-time statistics of the battery on the site. Value range: -100 to 100, units: centigrade(degC), and the value is accurate to one decimal place (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwAcbSampEntry 43 } hwAcbBatCell1Temp OBJECT-TYPE SYNTAX Integer32 (-1000..1000) MAX-ACCESS read-only STATUS current DESCRIPTION "Temperature of the battery cell. It indicates the real-time statistics of the battery on the site. Value range: -100 to 100, units: centigrade(degC), and the value is accurate to one decimal place (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwAcbSampEntry 22 } hwAcbBatCell2Temp OBJECT-TYPE SYNTAX Integer32 (-1000..1000) MAX-ACCESS read-only STATUS current DESCRIPTION "Temperature of the battery cell. It indicates the real-time statistics of the battery on the site. Value range: -100 to 100, units: centigrade(degC), and the value is accurate to one decimal place (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwAcbSampEntry 23 } hwAcbBatCell3Temp OBJECT-TYPE SYNTAX Integer32 (-1000..1000) MAX-ACCESS read-only STATUS current DESCRIPTION "Temperature of the battery cell. It indicates the real-time statistics of the battery on the site. Value range: -100 to 100, units: centigrade(degC), and the value is accurate to one decimal place (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwAcbSampEntry 24 } hwAcbBatCell4Temp OBJECT-TYPE SYNTAX Integer32 (-1000..1000) MAX-ACCESS read-only STATUS current DESCRIPTION "Temperature of the battery cell. It indicates the real-time statistics of the battery on the site. Value range: -100 to 100, units: centigrade(degC), and the value is accurate to one decimal place (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwAcbSampEntry 25 } hwAcbBatCell5Temp OBJECT-TYPE SYNTAX Integer32 (-1000..1000) MAX-ACCESS read-only STATUS current DESCRIPTION "Temperature of the battery cell. It indicates the real-time statistics of the battery on the site. Value range: -100 to 100, units: centigrade(degC), and the value is accurate to one decimal place (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwAcbSampEntry 26 } hwAcbBatCell6Temp OBJECT-TYPE SYNTAX Integer32 (-1000..1000) MAX-ACCESS read-only STATUS current DESCRIPTION "Temperature of the battery cell. It indicates the real-time statistics of the battery on the site. Value range: -100 to 100, units: centigrade(degC), and the value is accurate to one decimal place (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwAcbSampEntry 27 } hwAcbBatCell7Temp OBJECT-TYPE SYNTAX Integer32 (-1000..1000) MAX-ACCESS read-only STATUS current DESCRIPTION "Temperature of the battery cell. It indicates the real-time statistics of the battery on the site. Value range: -100 to 100, units: centigrade(degC), and the value is accurate to one decimal place (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwAcbSampEntry 28 } hwAcbBatCell8Temp OBJECT-TYPE SYNTAX Integer32 (-1000..1000) MAX-ACCESS read-only STATUS current DESCRIPTION "Temperature of the battery cell. It indicates the real-time statistics of the battery on the site. Value range: -100 to 100, units: centigrade(degC), and the value is accurate to one decimal place (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwAcbSampEntry 29 } hwAcbBatCell9Temp OBJECT-TYPE SYNTAX Integer32 (-1000..1000) MAX-ACCESS read-only STATUS current DESCRIPTION "Temperature of the battery cell. It indicates the real-time statistics of the battery on the site. Value range: -100 to 100, units: centigrade(degC), and the value is accurate to one decimal place (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwAcbSampEntry 30 } hwAcbBatCell10Temp OBJECT-TYPE SYNTAX Integer32 (-1000..1000) MAX-ACCESS read-only STATUS current DESCRIPTION "Temperature of the battery cell. It indicates the real-time statistics of the battery on the site. Value range: -100 to 100, units: centigrade(degC), and the value is accurate to one decimal place (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwAcbSampEntry 31 } hwAcbBatCell11Temp OBJECT-TYPE SYNTAX Integer32 (-1000..1000) MAX-ACCESS read-only STATUS current DESCRIPTION "Temperature of the battery cell. It indicates the real-time statistics of the battery on the site. Value range: -100 to 100, units: centigrade(degC), and the value is accurate to one decimal place (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwAcbSampEntry 32 } hwAcbBatCell12Temp OBJECT-TYPE SYNTAX Integer32 (-1000..1000) MAX-ACCESS read-only STATUS current DESCRIPTION "Temperature of the battery cell. It indicates the real-time statistics of the battery on the site. Value range: -100 to 100, units: centigrade(degC), and the value is accurate to one decimal place (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwAcbSampEntry 33 } hwAcbBatCell13Temp OBJECT-TYPE SYNTAX Integer32 (-1000..1000) MAX-ACCESS read-only STATUS current DESCRIPTION "Temperature of the battery cell. It indicates the real-time statistics of the battery on the site. Value range: -100 to 100, units: centigrade(degC), and the value is accurate to one decimal place (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwAcbSampEntry 34 } hwAcbBatCell14Temp OBJECT-TYPE SYNTAX Integer32 (-1000..1000) MAX-ACCESS read-only STATUS current DESCRIPTION "Temperature of the battery cell. It indicates the real-time statistics of the battery on the site. Value range: -100 to 100, units: centigrade(degC), and the value is accurate to one decimal place (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwAcbSampEntry 35 } hwAcbBatCell15Temp OBJECT-TYPE SYNTAX Integer32 (-1000..1000) MAX-ACCESS read-only STATUS current DESCRIPTION "Temperature of the battery cell. It indicates the real-time statistics of the battery on the site. Value range: -100 to 100, units: centigrade(degC), and the value is accurate to one decimal place (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwAcbSampEntry 36 } hwAcbBatCell16Temp OBJECT-TYPE SYNTAX Integer32 (-1000..1000) MAX-ACCESS read-only STATUS current DESCRIPTION "Temperature of the battery cell. It indicates the real-time statistics of the battery on the site. Value range: -100 to 100, units: centigrade(degC), and the value is accurate to one decimal place (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwAcbSampEntry 37 } hwAcbBatCell17Volt OBJECT-TYPE SYNTAX Unsigned32 (0..50) MAX-ACCESS read-only STATUS current DESCRIPTION "Voltage of the battery cell. It indicates the real-time statistics of the battery on the site. Value range: 0 to 5, unit: V, and the value is accurate to one decimal place (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwAcbSampEntry 44 } hwAcbBatCell18Volt OBJECT-TYPE SYNTAX Unsigned32 (0..50) MAX-ACCESS read-only STATUS current DESCRIPTION "Voltage of the battery cell. It indicates the real-time statistics of the battery on the site. Value range: 0 to 5, unit: V, and the value is accurate to one decimal place (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwAcbSampEntry 45 } hwAcbBatCell19Volt OBJECT-TYPE SYNTAX Unsigned32 (0..50) MAX-ACCESS read-only STATUS current DESCRIPTION "Voltage of the battery cell. It indicates the real-time statistics of the battery on the site. Value range: 0 to 5, unit: V, and the value is accurate to one decimal place (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwAcbSampEntry 46 } hwAcbBatCell20Volt OBJECT-TYPE SYNTAX Unsigned32 (0..50) MAX-ACCESS read-only STATUS current DESCRIPTION "Voltage of the battery cell. It indicates the real-time statistics of the battery on the site. Value range: 0 to 5, unit: V, and the value is accurate to one decimal place (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwAcbSampEntry 47 } hwAcbBatCell21Volt OBJECT-TYPE SYNTAX Unsigned32 (0..50) MAX-ACCESS read-only STATUS current DESCRIPTION "Voltage of the battery cell. It indicates the real-time statistics of the battery on the site. Value range: 0 to 5, unit: V, and the value is accurate to one decimal place (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwAcbSampEntry 48 } hwAcbBatCell22Volt OBJECT-TYPE SYNTAX Unsigned32 (0..50) MAX-ACCESS read-only STATUS current DESCRIPTION "Voltage of the battery cell. It indicates the real-time statistics of the battery on the site. Value range: 0 to 5, unit: V, and the value is accurate to one decimal place (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwAcbSampEntry 49 } hwAcbSetTable OBJECT-TYPE SYNTAX SEQUENCE OF HwAcbSetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "/" ::= { hwAcbEquip 3 } hwAcbSetEntry OBJECT-TYPE SYNTAX HwAcbSetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "/" INDEX { hwAcbGyroEnable } ::= { hwAcbSetTable 1 } HwAcbSetEntry ::= SEQUENCE { hwAcbGyroEnable INTEGER, hwAcbGyroSensitivityLevel INTEGER } hwAcbGyroEnable OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2), unknown(255) } MAX-ACCESS read-write STATUS current DESCRIPTION "Gyro Function Enable, Restricted use in special areas. If the value of the device is within the range, but the setting fails, the function is not supported. It is an enumeration value: If the enumeration value is 1, it means to gyro function disable, If the enumeration value is 2, it means to gyro function enable, If the enumeration value is 255, it indicates gyro in the unknown state." ::= { hwAcbSetEntry 5 } hwAcbGyroSensitivityLevel OBJECT-TYPE SYNTAX INTEGER { low(1), midium(2), high(3), unknown(255) } MAX-ACCESS read-write STATUS current DESCRIPTION "Gyro Level of Sensitivity. Restricted use in special areas. If the value of the device is within the range, but the setting fails, the function is not supported. It is an enumeration value: If the enumeration value is 1, it means to low sensitivity, If the enumeration value is 2, it means to medium sensitivity, If the enumeration value is 3, it means to high sensitivity, If the enumeration value is 255, it indicates gyro in the unknown level." ::= { hwAcbSetEntry 6 } hwElockEquip OBJECT IDENTIFIER ::= { hwSiteMonitorMIBObjects 27 } hwElockEquipTable OBJECT-TYPE SYNTAX SEQUENCE OF HwElockEquipEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "/" ::= { hwElockEquip 1 } hwElockEquipEntry OBJECT-TYPE SYNTAX HwElockEquipEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "/" INDEX { hwElockEquipIndex } ::= { hwElockEquipTable 1 } HwElockEquipEntry ::= SEQUENCE { hwElockEquipIndex Unsigned32, hwElockEquipId Unsigned32, hwElockEquipName OCTET STRING } hwElockEquipIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The elock equip Index." ::= { hwElockEquipEntry 1 } hwElockEquipId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The elock equip ID no." ::= { hwElockEquipEntry 2 } hwElockEquipName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..63)) MAX-ACCESS read-only STATUS current DESCRIPTION " The elock equip name." ::= { hwElockEquipEntry 3 } hwTemHumEquip OBJECT IDENTIFIER ::= { hwSiteMonitorMIBObjects 28 } hwTemHumEquipTable OBJECT-TYPE SYNTAX SEQUENCE OF HwTemHumEquipEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "/" ::= { hwTemHumEquip 1 } hwTemHumEquipEntry OBJECT-TYPE SYNTAX HwTemHumEquipEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "/" INDEX { hwTemHumEquipIndex } ::= { hwTemHumEquipTable 1 } HwTemHumEquipEntry ::= SEQUENCE { hwTemHumEquipIndex Unsigned32, hwTemHumEquipId Unsigned32, hwTemHumEquipName OCTET STRING, hwTemHumEquipAmbientTemp Integer32, hwTemHumEquipAmbientHumidity Unsigned32, hwSetHumTempUpperLimit Integer32, hwSetHumTempLowerLimit Integer32, hwSetHumidityUpperLimit Integer32, hwSetHumidityLowerLimit Integer32, hwTemHumEquipAddress Unsigned32 } hwTemHumEquipIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The tem_hum equip Index." ::= { hwTemHumEquipEntry 1 } hwTemHumEquipId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The tem_hum equip ID no." ::= { hwTemHumEquipEntry 2 } hwTemHumEquipName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..63)) MAX-ACCESS read-only STATUS current DESCRIPTION " The tem_hum equip name." ::= { hwTemHumEquipEntry 3 } hwTemHumEquipAmbientTemp OBJECT-TYPE SYNTAX Integer32 (-20..80) MAX-ACCESS read-only STATUS current DESCRIPTION "the environment temperature. units: centigrade (degC), and the value is an integer (1). " ::= { hwTemHumEquipEntry 4 } hwTemHumEquipAmbientHumidity OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "environment temperature , units: %RH, and the value is an integer (1). " ::= { hwTemHumEquipEntry 5 } hwSetHumTempUpperLimit OBJECT-TYPE SYNTAX Integer32 ( 25..80) MAX-ACCESS read-write STATUS current DESCRIPTION "Upper threshold of the environment temperature alarm, can be configured by users. Value range: 25 to 80, units: centigrade (degC), and the value is an integer (1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid. NOTE: There is linkage between hwSetHumTempUpperLimit and hwSetHumTempLowerLimit" ::= { hwTemHumEquipEntry 6 } hwSetHumTempLowerLimit OBJECT-TYPE SYNTAX Integer32 ( -20..20) MAX-ACCESS read-write STATUS current DESCRIPTION "Lower threshold of the environment temperature alarm, can be configured by users. Value range: -20 to 20, units: centigrade (degC), and the value is an integer (1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid. NOTE: There is linkage between hwSetHumTempUpperLimit and hwSetHumTempLowerLimit" ::= { hwTemHumEquipEntry 7 } hwSetHumidityUpperLimit OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "Upper threshold of the environment humility alarm, can be configured by users. Value range: 0 to 100, units: %RH, and the value is an integer (1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwTemHumEquipEntry 8 } hwSetHumidityLowerLimit OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "Lower threshold of the environment humility alarm, can be configured by users. Value range: 0 to 100, units: %RH, and the value is an integer (1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwTemHumEquipEntry 9 } hwTemHumEquipAddress OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Device address And the value is an integer (1)." ::= { hwTemHumEquipEntry 10 } hwHeaterEquip OBJECT IDENTIFIER ::= { hwSiteMonitorMIBObjects 29 } hwHeaterDeviceTable OBJECT-TYPE SYNTAX SEQUENCE OF HwHeaterDeviceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { hwHeaterEquip 1 } hwHeaterDeviceEntry OBJECT-TYPE SYNTAX HwHeaterDeviceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { hwHeaterDeviceIndex } ::= { hwHeaterDeviceTable 1 } HwHeaterDeviceEntry ::= SEQUENCE { hwHeaterDeviceIndex Unsigned32, hwHeaterDeviceEquipId Unsigned32, hwHeaterDeviceEquipName OCTET STRING, hwHeaterStartTemperature Integer32, hwHeaterStopTemperature Integer32 } hwHeaterDeviceIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "heater device table index." ::= { hwHeaterDeviceEntry 1 } hwHeaterDeviceEquipId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "heater device equipid." ::= { hwHeaterDeviceEntry 2 } hwHeaterDeviceEquipName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..63)) MAX-ACCESS read-only STATUS current DESCRIPTION "heater device equipname." ::= { hwHeaterDeviceEntry 3 } hwHeaterStartTemperature OBJECT-TYPE SYNTAX Integer32 (-10..15) MAX-ACCESS read-write STATUS current DESCRIPTION "heater start temperature; Value range:-10 to 15.Unit: degC. and the value is an integer (1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid. note: hwHeaterStartTemperature's set value must below hwHeaterStopTemperature's value." ::= { hwHeaterDeviceEntry 4 } hwHeaterStopTemperature OBJECT-TYPE SYNTAX Integer32 (5..20) MAX-ACCESS read-write STATUS current DESCRIPTION "heater stop temperature; Value range: 5 to 20.Unit: degC. and the value is an integer (1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid. note: hwHeaterStartTemperature's set value must below hwHeaterStopTemperature's value." ::= { hwHeaterDeviceEntry 5 } hwSiteDMU OBJECT IDENTIFIER ::= { hwSiteMonitorMIBObjects 31 } hwSiteDMUSampTable OBJECT-TYPE SYNTAX SEQUENCE OF HwSiteDMUSampEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { hwSiteDMU 1 } hwSiteDMUSampEntry OBJECT-TYPE SYNTAX HwSiteDMUSampEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { hwDMUIndex } ::= { hwSiteDMUSampTable 1 } HwSiteDMUSampEntry ::= SEQUENCE { hwDMUIndex Unsigned32, hwDMUEquipId Unsigned32, hwDMUEquipName OCTET STRING, hwDMUDCOutputVoltage Unsigned32, hwDMULoadCurrent Unsigned32, hwDMUTotalLoadConsumption Unsigned32 } hwDMUIndex OBJECT-TYPE SYNTAX Unsigned32 (0..256) MAX-ACCESS read-only STATUS current DESCRIPTION "DMU table index, which value range:1 to 256. Lines of the device list are restricted by the quantity of DMU." ::= { hwSiteDMUSampEntry 1 } hwDMUEquipId OBJECT-TYPE SYNTAX Unsigned32 (33001..33255) MAX-ACCESS read-only STATUS current DESCRIPTION "DMU device ID. Value range: 033'001 to 033'255, in which the first digits indicate the device type and the last three digits indicate the device SN." ::= { hwSiteDMUSampEntry 2 } hwDMUEquipName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..56)) MAX-ACCESS read-only STATUS current DESCRIPTION "Device name of the DMU module, character string type, is used to specify the DMU module. Otherwise, the configured character can not be any other languages except English." ::= { hwSiteDMUSampEntry 3 } hwDMUDCOutputVoltage OBJECT-TYPE SYNTAX Unsigned32 (0..1000) MAX-ACCESS read-only STATUS current DESCRIPTION "DC output voltage: 0 to 100, units: V, and the value is one decimal space (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwSiteDMUSampEntry 4 } hwDMULoadCurrent OBJECT-TYPE SYNTAX Unsigned32 (0..300000) MAX-ACCESS read-only STATUS current DESCRIPTION "Load current: 0 to 30000, units: A, and the value is one decimal space (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwSiteDMUSampEntry 5 } hwDMUTotalLoadConsumption OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Total load consumption: 0 to 4294967295, units: kWh, and the value is one decimal space (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwSiteDMUSampEntry 6 } hwSiteDMUSetTable OBJECT-TYPE SYNTAX SEQUENCE OF HwSiteDMUSetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { hwSiteDMU 2 } hwSiteDMUSetEntry OBJECT-TYPE SYNTAX HwSiteDMUSetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { hwSiteDMULoad1LvdEn } ::= { hwSiteDMUSetTable 1 } HwSiteDMUSetEntry ::= SEQUENCE { hwSiteDMULoad1LvdEn INTEGER, hwSiteDMULoad1LvdMode INTEGER, hwSiteDMULoad1LvdVoltage Unsigned32, hwSiteDMULoad1LvdReconVoltage Unsigned32, hwSiteDMULoad1LvdTime Integer32, hwSiteDMULoad1LvdCapacity Integer32, hwSiteDMULoad2LvdEn INTEGER, hwSiteDMULoad2LvdMode INTEGER, hwSiteDMULoad2LvdVoltage Unsigned32, hwSiteDMULoad2LvdReconVoltage Unsigned32, hwSiteDMULoad2LvdTime Integer32, hwSiteDMULoad2LvdCapacity Integer32 } hwSiteDMULoad1LvdEn OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "load1 lvd enable :It is an enumeration type: If the enumeration value is 1, it means to disable the lvd control; If the enumeration value is 2, it means to enable the lvd control " ::= { hwSiteDMUSetEntry 1 } hwSiteDMULoad1LvdMode OBJECT-TYPE SYNTAX INTEGER { voltagemode(1), timemode(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "load1 lvd mode :It is an enumeration type: If the enumeration value is 1, it means the voltage mode; If the enumeration value is 2, it means the time mode " ::= { hwSiteDMUSetEntry 2 } hwSiteDMULoad1LvdVoltage OBJECT-TYPE SYNTAX Unsigned32 (360..560) MAX-ACCESS read-write STATUS current DESCRIPTION "Low-voltage power-off voltage of the DMU unit can be configured by users. Its value range: 36 to 56, units: V, and the value is accurate to one decimal space (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwSiteDMUSetEntry 3 } hwSiteDMULoad1LvdReconVoltage OBJECT-TYPE SYNTAX Unsigned32 (370..580) MAX-ACCESS read-write STATUS current DESCRIPTION "Low-voltage power-off recover of the DMU unit can be configured by users. Its value range: 37.0 to 58.0, unit: V, and the value is accurate to one decimal space (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid. NOTE: There is linkage between hwSiteDMULoad1LvdVoltage and hwSiteDMULoad1LvdReconVoltage" ::= { hwSiteDMUSetEntry 4 } hwSiteDMULoad1LvdTime OBJECT-TYPE SYNTAX Integer32 (0..6000) MAX-ACCESS read-write STATUS current DESCRIPTION "Low-voltage power-off disconnected time, It can be configured by users, and its value is an integer (1). Here, if lvd mode is time mode, value range defines between 0 to 6000, unit: minutes(min). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid. NOTE: Only the lvd in time power off mode, this parameter can be configured successfully." ::= { hwSiteDMUSetEntry 5 } hwSiteDMULoad1LvdCapacity OBJECT-TYPE SYNTAX Integer32 (0..99) MAX-ACCESS read-write STATUS current DESCRIPTION "Power-off unit control the power off, when Remaining capacity percentage of the battery strings is below the calue. Value range: 0 to 99, unit: %, and the value is accurate to one decimal place (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid. NOTE: Only the lvd in capacity power off mode, this parameter can be configured successfully." ::= { hwSiteDMUSetEntry 6 } hwSiteDMULoad2LvdEn OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "load1 lvd enable :It is an enumeration type: If the enumeration value is 1, it means to disable the lvd control; If the enumeration value is 2, it means to enable the lvd control " ::= { hwSiteDMUSetEntry 7 } hwSiteDMULoad2LvdMode OBJECT-TYPE SYNTAX INTEGER { voltagemode(1), timemode(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "load1 lvd mode :It is an enumeration type: If the enumeration value is 1, it means the voltage mode; If the enumeration value is 2, it means the time mode " ::= { hwSiteDMUSetEntry 8 } hwSiteDMULoad2LvdVoltage OBJECT-TYPE SYNTAX Unsigned32 (360..560) MAX-ACCESS read-write STATUS current DESCRIPTION "Low-voltage power-off voltage of the DMU unit can be configured by users. Its value range: 36 to 56, units: V, and the value is accurate to one decimal space (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid." ::= { hwSiteDMUSetEntry 9 } hwSiteDMULoad2LvdReconVoltage OBJECT-TYPE SYNTAX Unsigned32 (370..580) MAX-ACCESS read-write STATUS current DESCRIPTION "Low-voltage power-off recover of the DMU unit can be configured by users. Its value range: 37.0 to 58.0, unit: V, and the value is accurate to one decimal space (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid. NOTE: There is linkage between hwSiteDMULoad2LvdVoltage and hwSiteDMULoad2LvdReconVoltage" ::= { hwSiteDMUSetEntry 10 } hwSiteDMULoad2LvdTime OBJECT-TYPE SYNTAX Integer32 (0..6000) MAX-ACCESS read-write STATUS current DESCRIPTION "Low-voltage power-off disconnected time, It can be configured by users, and its value is an integer (1). Here, if lvd mode is time mode, value range defines between 0 to 6000, unit: minutes(min). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid. NOTE: Only the lvd in time power off mode, this parameter can be configured successfully." ::= { hwSiteDMUSetEntry 11 } hwSiteDMULoad2LvdCapacity OBJECT-TYPE SYNTAX Integer32 (0..99) MAX-ACCESS read-write STATUS current DESCRIPTION "Power-off unit control the power off, when Remaining capacity percentage of the battery strings is below the calue. Value range: 0 to 99, unit: %, and the value is accurate to one decimal place (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid. NOTE: Only the lvd in capacity power off mode, this parameter can be configured successfully." ::= { hwSiteDMUSetEntry 12 } hwSiteAts OBJECT IDENTIFIER ::= { hwSiteMonitorMIBObjects 33 } hwAtsSampTable OBJECT-TYPE SYNTAX SEQUENCE OF HwAtsSampEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { hwSiteAts 1 } hwAtsSampEntry OBJECT-TYPE SYNTAX HwAtsSampEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { hwAtsIndex } ::= { hwAtsSampTable 1 } HwAtsSampEntry ::= SEQUENCE { hwAtsIndex Unsigned32, hwAtsEquipId Unsigned32, hwAtsEquipName OCTET STRING } hwAtsIndex OBJECT-TYPE SYNTAX Unsigned32 (0..256) MAX-ACCESS read-only STATUS current DESCRIPTION "Table index of the running ATS modules" ::= { hwAtsSampEntry 1 } hwAtsEquipId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "ATS module ID. " ::= { hwAtsSampEntry 2 } hwAtsEquipName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..56)) MAX-ACCESS read-only STATUS current DESCRIPTION "Device name of the ATS module" ::= { hwAtsSampEntry 3 } hwSiteMonitorMIBTraps OBJECT IDENTIFIER ::= { hwSiteMonitorMIB 2 } hwSiteAlarmTraps OBJECT IDENTIFIER ::= { hwSiteMonitorMIBTraps 1 } hwSiteAlarmTrapsPrefix OBJECT IDENTIFIER ::= { hwSiteAlarmTraps 0 } hwRectifierFaultAlarmTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwRectEquipId,hwRectEquipName,hwRectOperStatus } STATUS current DESCRIPTION "When rectifiers fault alarms happen, a alarm trap will be send. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm port description, Alarm severity, and Site alarm SN. Additionally, in order to identify the device, rectifier equipment ID and equipment name are also include in VB(variable bondings)." ::= { hwSiteAlarmTrapsPrefix 1 } hwRectifierFaultAlarmResumeTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwRectEquipId,hwRectEquipName,hwRectOperStatus } STATUS current DESCRIPTION "Rectifier Fault alarm resolved.Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm port description, Alarm severity, and Site alarm SN. Additionally, in order to identify the device, rectifier equipment ID and equipment name are also include in VB(variable bondings)." ::= { hwSiteAlarmTrapsPrefix 2 } hwRectifierAbnormalAlarmTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwRectEquipId,hwRectEquipName,hwRectOperStatus } STATUS current DESCRIPTION "Rectifier abnormal alarm, because of communication failure, module protection, or turnoff. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm port description, Alarm severity, and Site alarm SN. Additionally, in order to identify the device, rectifier equipment ID and equipment name are also include in VB(variable bondings)." ::= { hwSiteAlarmTrapsPrefix 3 } hwRectifierAbnormalAlarmResumeTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwRectEquipId,hwRectEquipName,hwRectOperStatus } STATUS current DESCRIPTION "Rectifier abnormal alarm resume. Description.Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm port description, Alarm severity, and Site alarm SN. Additionally, in order to identify the device, rectifier equipment ID and equipment name are also include in VB(variable bondings)." ::= { hwSiteAlarmTrapsPrefix 4 } hwBattLoopBreakAlarmTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwBattStringEquipId,hwBattStringEquipName,hwBattStringOperStatus } STATUS current DESCRIPTION "Battery loop disconnect. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm port description, Alarm severity, and Site alarm SN. Additionally, in order to identify the device, battery string equipment ID and equipment name are also include in VB(variable bondings)." ::= { hwSiteAlarmTrapsPrefix 5 } hwBattLoopBreakAlarmResumeTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwBattStringEquipId,hwBattStringEquipName,hwBattStringOperStatus } STATUS current DESCRIPTION "Battery loop break alarm resume. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm port description, Alarm severity, and Site alarm SN. Additionally, in order to identify the device, battery string equipment ID and equipment name are also include in VB(variable bondings)." ::= { hwSiteAlarmTrapsPrefix 6 } hwBattLvdAlarmTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwLvdUnitEquipId,hwLvdUnitEquipName,hwLvdBranchOperStatus } STATUS current DESCRIPTION "Battery disconnect for low voltage. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm port description, Alarm severity, and Site alarm SN. Additionally, in order to identify the device, battery LVD unit equipment ID and equipment name are also include in VB(variable bondings)." ::= { hwSiteAlarmTrapsPrefix 7 } hwBattLvdAlarmResumeTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwLvdUnitEquipId,hwLvdUnitEquipName,hwLvdBranchOperStatus } STATUS current DESCRIPTION "Battery LVD alarm resume. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm port description, Alarm severity, and Site alarm SN. Additionally, in order to identify the device, battery LVD unit equipment ID and equipment name are also include in VB(variable bondings)." ::= { hwSiteAlarmTrapsPrefix 8 } hwBattOverCurrAlarmTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwBattStringEquipId,hwBattStringEquipName,hwBattStringOperStatus } STATUS current DESCRIPTION "Batterys charge in over current. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm port description, Alarm severity, and Site alarm SN. Additionally, in order to identify the device, battery string equipment ID and equipment name are also include in VB(variable bondings)." ::= { hwSiteAlarmTrapsPrefix 9 } hwBattOverCurrAlarmResumeTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwBattStringEquipId,hwBattStringEquipName,hwBattStringOperStatus } STATUS current DESCRIPTION "Batterys over current alarm resume. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm port description, Alarm severity, and Site alarm SN. Additionally, in order to identify the device, battery string equipment ID and equipment name are also include in VB(variable bondings)." ::= { hwSiteAlarmTrapsPrefix 10 } hwBattStringTempAlarmTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwBattStringEquipId,hwBattStringEquipName,hwBattStringOperStatus } STATUS current DESCRIPTION "Battery string temperature is too high or too low. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm port description, Alarm severity, and Site alarm SN. Additionally, in order to identify the device, battery group ID and group name are also include in VB(variable bondings)." ::= { hwSiteAlarmTrapsPrefix 11 } hwBattStringTempAlarmResumeTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwBattStringEquipId,hwBattStringEquipName,hwBattStringOperStatus } STATUS current DESCRIPTION "Battery string temperature alarm resume. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm port description, Alarm severity, and Site alarm SN. Additionally, in order to identify the device, battery group ID and group name are also include in VB(variable bondings)." ::= { hwSiteAlarmTrapsPrefix 12 } hwBattDischargeAlarmTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwBattsGroupId,hwBattsGroupName } STATUS current DESCRIPTION "Battery group discharge alarm. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm port description, Alarm severity, and Site alarm SN. Additionally, in order to identify the device, battery group ID and group name are also include in VB(variable bondings)." ::= { hwSiteAlarmTrapsPrefix 13 } hwBattDischargeAlarmResumeTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwBattsGroupId,hwBattsGroupName } STATUS current DESCRIPTION "Battery group discharge alarm resume. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm port description, Alarm severity, and Site alarm SN. Additionally, in order to identify the device, battery group ID and group name are also include in VB(variable bondings)." ::= { hwSiteAlarmTrapsPrefix 14 } hwAcInputAlarmTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwAcEquipId,hwAcEquipName,hwAcInputOperStatus } STATUS current DESCRIPTION "AC absent or AC power off alarms happened. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm port description, Alarm severity, and Site alarm SN. Additionally, in order to identify the device, AC equipment ID and equipment name are also include in VB(variable bondings)." ::= { hwSiteAlarmTrapsPrefix 15 } hwAcInputAlarmResumeTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwAcEquipId,hwAcEquipName,hwAcInputOperStatus } STATUS current DESCRIPTION "AC input alarm resumed. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm port description, Alarm severity, and Site alarm SN. Additionally, in order to identify the device, AC equipment ID and equipment name are also include in VB(variable bondings)." ::= { hwSiteAlarmTrapsPrefix 16 } hwAcVoltAlarmTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwAcEquipId,hwAcEquipName,hwAcInputOperStatus } STATUS current DESCRIPTION "AC voltage too high or too low. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm port description, Alarm severity, and Site alarm SN. Additionally, in order to identify the device, AC equipment ID and equipment name are also include in VB(variable bondings)." ::= { hwSiteAlarmTrapsPrefix 17 } hwAcVoltAlarmResumeTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwAcEquipId,hwAcEquipName,hwAcInputOperStatus } STATUS current DESCRIPTION "AC voltage alarm resume. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm port description, Alarm severity, and Site alarm SN. Additionally, in order to identify the device, AC equipment ID and equipment name are also include in VB(variable bondings)." ::= { hwSiteAlarmTrapsPrefix 18 } hwDcVoltAlarmTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwDcOutputEquipId,hwDcOutputEquipName,hwDcOutputOperStatus } STATUS current DESCRIPTION "DC voltage alarm. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm port description, Alarm severity, and Site alarm SN. Additionally, in order to identify the device, AC equipment ID and equipment name are also include in VB(variable bondings)." ::= { hwSiteAlarmTrapsPrefix 19 } hwDcVoltAlarmResumeTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwDcOutputEquipId,hwDcOutputEquipName,hwDcOutputOperStatus } STATUS current DESCRIPTION "DC voltage alarm resume. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm port description, Alarm severity, and Site alarm SN. Additionally, in order to identify the device, DC equipment ID and equipment name are also include in VB(variable bondings)." ::= { hwSiteAlarmTrapsPrefix 20 } hwLoadLvdAlarmTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwLvdUnitEquipId,hwLvdUnitEquipName,hwLvdBranchOperStatus } STATUS current DESCRIPTION "Loads disconnect for low voltage. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm port description, Alarm severity, and Site alarm SN. Additionally, in order to identify the device, load LVD unit equipment ID and equipment name are also include in VB(variable bondings)." ::= { hwSiteAlarmTrapsPrefix 21 } hwLoadLvdAlarmResumeTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwLvdUnitEquipId,hwLvdUnitEquipName,hwLvdBranchOperStatus } STATUS current DESCRIPTION "Load LVD alarm resume. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm port description, Alarm severity, and Site alarm SN. Additionally, in order to identify the device, load LVD unit equipment ID and equipment name are also include in VB(variable bondings)." ::= { hwSiteAlarmTrapsPrefix 22 } hwLoadFuseAlarmTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwLoadBranchEquipId,hwLoadBranchEquipName,hwLoadBranchOperStatus } STATUS current DESCRIPTION "Load fuse broken down. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm port description, Alarm severity, and Site alarm SN. Additionally, in order to identify the device, battery string equipment ID and equipment name are also include in VB(variable bondings)." ::= { hwSiteAlarmTrapsPrefix 23 } hwLoadFuseAlarmResumeTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwLoadBranchEquipId,hwLoadBranchEquipName,hwLoadBranchOperStatus } STATUS current DESCRIPTION "Load fuse alarm resume. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm port description, Alarm severity, and Site alarm SN. Additionally, in order to identify the device, battery string equipment ID and equipment name are also include in VB(variable bondings)." ::= { hwSiteAlarmTrapsPrefix 24 } hwEnvTempAlarmTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwEnvTempEquipId,hwEnvTempEquipName,hwEnvTempSensorOperStatus } STATUS current DESCRIPTION "Environment temperature is too high or too low. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm port description, Alarm severity, and Site alarm SN. Additionally, in order to identify the device, envirenment temperature sensor equipment ID and equipment name are also include in VB(variable bondings)." ::= { hwSiteAlarmTrapsPrefix 25 } hwEnvTempAlarmResumeTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwEnvTempEquipId,hwEnvTempEquipName,hwEnvTempSensorOperStatus } STATUS current DESCRIPTION "Environment temperature alarm resume. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm port description, Alarm severity, and Site alarm SN. Additionally, in order to identify the device, envirenment temperature sensor equipment ID and equipment name are also include in VB(variable bondings)." ::= { hwSiteAlarmTrapsPrefix 26 } hwEnvHumiAlarmTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwEnvHumiEquipId,hwEnvHumiEquipName,hwEnvHumiSensorOperStatus } STATUS current DESCRIPTION "Environment humidity is too high or too low. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm port description, Alarm severity, and Site alarm SN. Additionally, in order to identify the device, envirenment humidity sensor equipment ID and equipment name are also include in VB(variable bondings)." ::= { hwSiteAlarmTrapsPrefix 27 } hwEnvHumiAlarmResumeTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwEnvHumiEquipId,hwEnvHumiEquipName,hwEnvHumiSensorOperStatus } STATUS current DESCRIPTION "Environment humidity alarm resume. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm port description, Alarm severity, and Site alarm SN. Additionally, in order to identify the device, envirenment humidity sensor equipment ID and equipment name are also include in VB(variable bondings)." ::= { hwSiteAlarmTrapsPrefix 28 } hwSpareDigitalAlarmTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwSpareDigitalEquipId,hwSpareDigitalEquipName,hwSpareDigitalOperStatus } STATUS current DESCRIPTION "Spare digital fault. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm port description, Alarm severity, and Site alarm SN. Additionally, in order to identify the device, Spare digital equipment ID and equipment name are also include in VB(variable bondings)." ::= { hwSiteAlarmTrapsPrefix 29 } hwSpareDigitalAlarmResumeTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwSpareDigitalEquipId,hwSpareDigitalEquipName,hwSpareDigitalOperStatus } STATUS current DESCRIPTION "Spare digital alarm resume.Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm port description, Alarm severity, and Site alarm SN. Additionally, in order to identify the device, Spare digital equipment ID and equipment name are also include in VB(variable bondings)." ::= { hwSiteAlarmTrapsPrefix 30 } hwDoorAlarmTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwEnvUnitsGroupId,hwEnvUnitsGroupName } STATUS current DESCRIPTION "Door open. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm port description, Alarm severity, and Site alarm SN. Additionally, in order to identify the device, envirenment unit group ID and group name are also include in VB(variable bondings)." ::= { hwSiteAlarmTrapsPrefix 31 } hwDoorAlarmResumeTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwEnvUnitsGroupId,hwEnvUnitsGroupName } STATUS current DESCRIPTION "Door alarm resume. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm port description, Alarm severity, and Site alarm SN. Additionally, in order to identify the device, envirenment unit group ID and group name are also include in VB(variable bondings)." ::= { hwSiteAlarmTrapsPrefix 32 } hwWaterAlarmTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwEnvUnitsGroupId,hwEnvUnitsGroupName } STATUS current DESCRIPTION "Water alarm. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm port description, Alarm severity, and Site alarm SN. Additionally, in order to identify the device, envirenment unit group ID and group name are also include in VB(variable bondings)." ::= { hwSiteAlarmTrapsPrefix 33 } hwWaterAlarmResumeTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwEnvUnitsGroupId,hwEnvUnitsGroupName } STATUS current DESCRIPTION "Water alarm resume. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm port description, Alarm severity, and Site alarm SN. Additionally, in order to identify the device, envirenment unit group ID and group name are also include in VB(variable bondings)." ::= { hwSiteAlarmTrapsPrefix 34 } hwSmokeAlarmTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwEnvUnitsGroupId,hwEnvUnitsGroupName } STATUS current DESCRIPTION "Site is on fire, which is detected by smoke sensors. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm port description, Alarm severity, and Site alarm SN. Additionally, in order to identify the device, envirenment unit group ID and group name are also include in VB(variable bondings)." ::= { hwSiteAlarmTrapsPrefix 35 } hwSmokeAlarmResumeTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwEnvUnitsGroupId,hwEnvUnitsGroupName } STATUS current DESCRIPTION "Smoke alarm resume. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm port description, Alarm severity, and Site alarm SN. Additionally, in order to identify the device, envirenment unit group ID and group name are also include in VB(variable bondings)." ::= { hwSiteAlarmTrapsPrefix 36 } hwWireAlarmTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwEnvUnitsGroupId,hwEnvUnitsGroupName } STATUS current DESCRIPTION "Wire alarm.Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm port description, Alarm severity, and Site alarm SN. Additionally, in order to identify the device, envirenment unit group ID and group name are also include in VB(variable bondings)." ::= { hwSiteAlarmTrapsPrefix 37 } hwWireAlarmResumeTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwEnvUnitsGroupId,hwEnvUnitsGroupName } STATUS current DESCRIPTION "Wire alarm resume. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm port description, Alarm severity, and Site alarm SN. Additionally, in order to identify the device, envirenment unit group ID and group name are also include in VB(variable bondings)." ::= { hwSiteAlarmTrapsPrefix 38 } hwAcBreakerAlarmTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwAcInputBreakerEquipId,hwAcInputBreakerEquipName,hwAcInputBreakerOperStatus } STATUS current DESCRIPTION "AC breaker alarm.Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm port description, Alarm severity, and Site alarm SN. Additionally, in order to identify the device, AC distribution unit ID and its name are also include in VB(variable bondings)." ::= { hwSiteAlarmTrapsPrefix 39 } hwAcBreakerAlarmResumeTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwAcInputBreakerEquipId,hwAcInputBreakerEquipName,hwAcInputBreakerOperStatus } STATUS current DESCRIPTION "AC breaker alarm resume.Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm port description, Alarm severity, and Site alarm SN. Additionally, in order to identify the device, AC distribution unit ID and its name are also include in VB(variable bondings)." ::= { hwSiteAlarmTrapsPrefix 40 } hwMultiRectFailureAlarmTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwRectsGroupId,hwRectsGroupName } STATUS current DESCRIPTION "More than one rectifier reported fault alarms in the same time. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm port description, Alarm severity, and Site alarm SN. Additionally, in order to identify the device, rectifier group ID and group name are also include in VB(variable bondings)." ::= { hwSiteAlarmTrapsPrefix 41 } hwMultiRectFailureAlarmResumeTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwRectsGroupId,hwRectsGroupName } STATUS current DESCRIPTION "Multi-rectifiers fault alarm resume. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm port description, Alarm severity, and Site alarm SN. Additionally, in order to identify the device, rectifier group ID and group name are also include in VB(variable bondings)." ::= { hwSiteAlarmTrapsPrefix 42 } hwRectRedundAlarmTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwRectsGroupId,hwRectsGroupName } STATUS current DESCRIPTION "Rectifiers work redundantly, in this case that some of rectifiers will going to sleep. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm port description, Alarm severity, and Site alarm SN. Additionally, in order to identify the device, rectifier group ID and group name are also include in VB(variable bondings)." ::= { hwSiteAlarmTrapsPrefix 43 } hwRectRedundAlarmResumeTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwRectsGroupId,hwRectsGroupName } STATUS current DESCRIPTION "Rectifiers redundant alarm resume, when the power supply and requirement were in balance. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm port description, Alarm severity, and Site alarm SN. Additionally, in order to identify the device, rectifier group ID and group name are also include in VB(variable bondings)." ::= { hwSiteAlarmTrapsPrefix 44 } hwBattUnbalanceAlarmTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwBattStringEquipId,hwBattStringEquipName,hwBattStringOperStatus } STATUS current DESCRIPTION "Battery works in unbalance state. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm port description, Alarm severity, and Site alarm SN. Additionally, in order to identify the device, battery string equipment ID and equipment name are also include in VB(variable bondings)." ::= { hwSiteAlarmTrapsPrefix 45 } hwBattUnbalanceAlarmResumeTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwBattStringEquipId,hwBattStringEquipName,hwBattStringOperStatus } STATUS current DESCRIPTION "Battery unbalance alarm resume. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm port description, Alarm severity, and Site alarm SN. Additionally, in order to identify the device, battery string equipment ID and equipment name are also include in VB(variable bondings)." ::= { hwSiteAlarmTrapsPrefix 46 } hwAcFreqFaultAlarmTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwAcEquipId,hwAcEquipName,hwAcInputOperStatus } STATUS current DESCRIPTION "AC frequency is fault. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm port description, Alarm severity, and Site alarm SN. Additionally, in order to identify the device, AC equipment ID and equipment name are also include in VB(variable bondings)." ::= { hwSiteAlarmTrapsPrefix 47 } hwAcFreqFaultAlarmResumeTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwAcEquipId,hwAcEquipName,hwAcInputOperStatus } STATUS current DESCRIPTION "AC frequency alarm resume. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm port description, Alarm severity, and Site alarm SN. Additionally, in order to identify the device, AC equipment ID and equipment name are also include in VB(variable bondings)." ::= { hwSiteAlarmTrapsPrefix 48 } hwXmuSelfFaultAlarmTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwMonEquipId,hwMonEquipName,hwMonitorOperStatus } STATUS current DESCRIPTION "There are some fault in XMU itself. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm port description, Alarm severity, and Site alarm SN. Additionally, in order to identify the device, monitor equipment ID and equipment name are also include in VB(variable bondings)." ::= { hwSiteAlarmTrapsPrefix 49 } hwXmuSelfFaultAlarmResumeTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwMonEquipId,hwMonEquipName,hwMonitorOperStatus } STATUS current DESCRIPTION "XMU fault alarm resume. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm port description, Alarm severity, and Site alarm SN. Additionally, in order to identify the device, monitor equipment ID and equipment name are also include in VB(variable bondings)." ::= { hwSiteAlarmTrapsPrefix 50 } hwRs485CommAlarmTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwMonEquipId,hwMonEquipName,hwMonitorOperStatus } STATUS current DESCRIPTION "RS485 communication of monitors disconnect. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm port description, Alarm severity, and Site alarm SN. Additionally, in order to identify the device, monitor equipment ID and equipment name are also include in VB(variable bondings)." ::= { hwSiteAlarmTrapsPrefix 51 } hwRs485CommAlarmResumeTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwMonEquipId,hwMonEquipName,hwMonitorOperStatus } STATUS current DESCRIPTION "RS485 communication alarm resume. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm port description, Alarm severity, and Site alarm SN. Additionally, in order to identify the device, monitor equipment ID and equipment name are also include in VB(variable bondings)." ::= { hwSiteAlarmTrapsPrefix 52 } hwNetCommAlarmTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwMonEquipId,hwMonEquipName,hwMonitorOperStatus } STATUS current DESCRIPTION "Network communication of monitors disconnect. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm port description, Alarm severity, and Site alarm SN. Additionally, in order to identify the device, monitor equipment ID and equipment name are also include in VB(variable bondings)." ::= { hwSiteAlarmTrapsPrefix 53 } hwNetCommAlarmResumeTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwMonEquipId,hwMonEquipName,hwMonitorOperStatus } STATUS current DESCRIPTION "Network communication alarm resume. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm port description, Alarm severity, and Site alarm SN. Additionally, in order to identify the device, monitor equipment ID and equipment name are also include in VB(variable bondings)." ::= { hwSiteAlarmTrapsPrefix 54 } hwAcOffLongTimeAlarmTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwAcEquipId,hwAcEquipName,hwAcInputOperStatus } STATUS current DESCRIPTION "AC power off for a long time alarms happened. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm port description, Alarm severity, and Site alarm SN. Additionally, in order to identify the device, AC equipment ID and equipment name are also include in VB(variable bondings)." ::= { hwSiteAlarmTrapsPrefix 55 } hwAcOffLongTimeAlarmResumeTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwAcEquipId,hwAcEquipName,hwAcInputOperStatus } STATUS current DESCRIPTION "AC power off for a long time alarms resume. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm port description, Alarm severity, and Site alarm SN. Additionally, in order to identify the device, AC equipment ID and equipment name are also include in VB(variable bondings)." ::= { hwSiteAlarmTrapsPrefix 56 } hwSpdAlarmTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwEnvUnitsGroupId,hwEnvUnitsGroupName } STATUS current DESCRIPTION "Description." ::= { hwSiteAlarmTrapsPrefix 57 } hwSpdAlarmResumeTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwEnvUnitsGroupId,hwEnvUnitsGroupName } STATUS current DESCRIPTION "Description." ::= { hwSiteAlarmTrapsPrefix 58 } hwBadBatteryTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwBattsGroupId,hwBattsGroupName } STATUS current DESCRIPTION "Description." ::= { hwSiteAlarmTrapsPrefix 59 } hwBadBatteryResumeTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwBattsGroupId,hwBattsGroupName } STATUS current DESCRIPTION "Description." ::= { hwSiteAlarmTrapsPrefix 60 } hwLvd2DisconnectingTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwLvdUnitEquipId,hwLvdUnitEquipName,hwLvdBranchOperStatus } STATUS current DESCRIPTION "Description." ::= { hwSiteAlarmTrapsPrefix 61 } hwLvd2DisconnectingResumeTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwLvdUnitEquipId,hwLvdUnitEquipName,hwLvdBranchOperStatus } STATUS current DESCRIPTION "Description." ::= { hwSiteAlarmTrapsPrefix 62 } hwBattHighTempTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwBattStringEquipId,hwBattStringEquipName,hwBattStringOperStatus } STATUS current DESCRIPTION "Description." ::= { hwSiteAlarmTrapsPrefix 63 } hwBattHighTempResumeTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwBattStringEquipId,hwBattStringEquipName,hwBattStringOperStatus } STATUS current DESCRIPTION "Description." ::= { hwSiteAlarmTrapsPrefix 64 } hwBattLowTempTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwBattStringEquipId,hwBattStringEquipName,hwBattStringOperStatus } STATUS current DESCRIPTION "Description." ::= { hwSiteAlarmTrapsPrefix 65 } hwBattLowTempResumeTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwBattStringEquipId,hwBattStringEquipName,hwBattStringOperStatus } STATUS current DESCRIPTION "Description." ::= { hwSiteAlarmTrapsPrefix 66 } hwDcUltraOverVoltageTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwDcOutputEquipId,hwDcOutputEquipName,hwDcOutputOperStatus } STATUS current DESCRIPTION "Description." ::= { hwSiteAlarmTrapsPrefix 67 } hwDcUltraOverVoltageResumeTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwDcOutputEquipId,hwDcOutputEquipName,hwDcOutputOperStatus } STATUS current DESCRIPTION "Description." ::= { hwSiteAlarmTrapsPrefix 68 } hwDcUltraUnderVoltageTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwDcOutputEquipId,hwDcOutputEquipName,hwDcOutputOperStatus } STATUS current DESCRIPTION "Description." ::= { hwSiteAlarmTrapsPrefix 69 } hwDcUltraUnderVoltageResumeTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwDcOutputEquipId,hwDcOutputEquipName,hwDcOutputOperStatus } STATUS current DESCRIPTION "Description." ::= { hwSiteAlarmTrapsPrefix 70 } hwUmiCommFailTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwEnvUnitsGroupId,hwEnvUnitsGroupName } STATUS current DESCRIPTION "Description." ::= { hwSiteAlarmTrapsPrefix 71 } hwUmiCommFailResumeTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwEnvUnitsGroupId,hwEnvUnitsGroupName } STATUS current DESCRIPTION "Description." ::= { hwSiteAlarmTrapsPrefix 72 } hwShortTestFailTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwBattsGroupId,hwBattsGroupName } STATUS current DESCRIPTION "Description." ::= { hwSiteAlarmTrapsPrefix 73 } hwShortTestFailResumeTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwBattsGroupId,hwBattsGroupName } STATUS current DESCRIPTION "Description." ::= { hwSiteAlarmTrapsPrefix 74 } hwMissingBattTempSensorTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwBattsGroupId,hwBattsGroupName } STATUS current DESCRIPTION "Description." ::= { hwSiteAlarmTrapsPrefix 75 } hwMissingBattTempSensorResumeTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwBattsGroupId,hwBattsGroupName } STATUS current DESCRIPTION "Description." ::= { hwSiteAlarmTrapsPrefix 76 } hwBattTempSensorFaultTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwBattsGroupId,hwBattsGroupName } STATUS current DESCRIPTION "Description." ::= { hwSiteAlarmTrapsPrefix 77 } hwBattTempSensorFaultResumeTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwBattsGroupId,hwBattsGroupName } STATUS current DESCRIPTION "Description." ::= { hwSiteAlarmTrapsPrefix 78 } hwAcOverVoltageTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwAcEquipId,hwAcEquipName,hwAcInputOperStatus } STATUS current DESCRIPTION "Description." ::= { hwSiteAlarmTrapsPrefix 79 } hwAcOverVoltageResumeTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwAcEquipId,hwAcEquipName,hwAcInputOperStatus } STATUS current DESCRIPTION "Description." ::= { hwSiteAlarmTrapsPrefix 80 } hwAcUnderVoltageTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwAcEquipId,hwAcEquipName,hwAcInputOperStatus } STATUS current DESCRIPTION "Description." ::= { hwSiteAlarmTrapsPrefix 81 } hwAcUnderVoltageResumeTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwAcEquipId,hwAcEquipName,hwAcInputOperStatus } STATUS current DESCRIPTION "Description." ::= { hwSiteAlarmTrapsPrefix 82 } hwTcuFanAlarmTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwFanEquipId,hwFanEquipName,hwFanOperStatus } STATUS current DESCRIPTION "Description." ::= { hwSiteAlarmTrapsPrefix 83 } hwTcuFanAlarmResumeTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwFanEquipId,hwFanEquipName,hwFanOperStatus } STATUS current DESCRIPTION "Description." ::= { hwSiteAlarmTrapsPrefix 84 } hwTcuDcAirAlarmTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwDcAirEquipId,hwDcAirEquipName,hwDcAirOperStatus } STATUS current DESCRIPTION "Description." ::= { hwSiteAlarmTrapsPrefix 85 } hwTcuDcAirAlarmResumeTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwDcAirEquipId,hwDcAirEquipName,hwDcAirOperStatus } STATUS current DESCRIPTION "Description." ::= { hwSiteAlarmTrapsPrefix 86 } hwTripBreakAlarmTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwAcInputBreakerEquipId,hwAcInputBreakerEquipName,hwAcInputBreakerOperStatus } STATUS current DESCRIPTION "Description." ::= { hwSiteAlarmTrapsPrefix 87 } hwTripBreakAlarmResumeTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwAcInputBreakerEquipId,hwAcInputBreakerEquipName,hwAcInputBreakerOperStatus } STATUS current DESCRIPTION "Description." ::= { hwSiteAlarmTrapsPrefix 88 } hwTripBatteryCabinetAlarmTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwBatteryCabinetEquipId,hwBatteryCabinetEquipName } STATUS current DESCRIPTION "Description." ::= { hwSiteAlarmTrapsPrefix 89 } hwTripBattCabAlarmResumeTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwBatteryCabinetEquipId,hwBatteryCabinetEquipName } STATUS current DESCRIPTION "Description." ::= { hwSiteAlarmTrapsPrefix 90 } hwBattTestAlarmTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwBattsGroupId,hwBattsGroupName } STATUS current DESCRIPTION "Description." ::= { hwSiteAlarmTrapsPrefix 103 } hwBattTestAlarmResumeTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwBattsGroupId,hwBattsGroupName } STATUS current DESCRIPTION "Description." ::= { hwSiteAlarmTrapsPrefix 104 } hwBattContactorFaultTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwDcOutputEquipId,hwDcOutputEquipName,hwDcOutputOperStatus } STATUS current DESCRIPTION "Description." ::= { hwSiteAlarmTrapsPrefix 105 } hwBattContactorFaultResumeTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwDcOutputEquipId,hwDcOutputEquipName,hwDcOutputOperStatus } STATUS current DESCRIPTION "Description." ::= { hwSiteAlarmTrapsPrefix 106 } hwBattFuseBreakAlarmTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwBattStringEquipId,hwBattStringEquipName,hwBattStringOperStatus } STATUS current DESCRIPTION "Description." ::= { hwSiteAlarmTrapsPrefix 107 } hwBattFuseBreakAlarmResumeTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwBattStringEquipId,hwBattStringEquipName,hwBattStringOperStatus } STATUS current DESCRIPTION "Description." ::= { hwSiteAlarmTrapsPrefix 108 } hwDCDAbnormalAlarmTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwDcOutputEquipId,hwDcOutputEquipName,hwDcOutputOperStatus } STATUS current DESCRIPTION "Description." ::= { hwSiteAlarmTrapsPrefix 109 } hwDCDAbnormalAlarmResumeTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwDcOutputEquipId,hwDcOutputEquipName,hwDcOutputOperStatus } STATUS current DESCRIPTION "Description." ::= { hwSiteAlarmTrapsPrefix 110 } hwACDAbnormalAlarmTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwAcEquipId,hwAcEquipName,hwAcInputOperStatus } STATUS current DESCRIPTION "Description." ::= { hwSiteAlarmTrapsPrefix 111 } hwACDAbnormalAlarmResumeTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwAcEquipId,hwAcEquipName,hwAcInputOperStatus } STATUS current DESCRIPTION "Description." ::= { hwSiteAlarmTrapsPrefix 112 } hwLoadOverCurrentAlarmTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwDcOutputEquipId,hwDcOutputEquipName,hwDcOutputOperStatus } STATUS current DESCRIPTION "Description." ::= { hwSiteAlarmTrapsPrefix 113 } hwLoadOverCurrentAlarmResumeTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwDcOutputEquipId,hwDcOutputEquipName,hwDcOutputOperStatus } STATUS current DESCRIPTION "Description." ::= { hwSiteAlarmTrapsPrefix 114 } hwEOSNoResponseAlarmTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwLoadBranchEquipId,hwLoadBranchEquipName,hwLoadBranchOperStatus } STATUS current DESCRIPTION "Description." ::= { hwSiteAlarmTrapsPrefix 115 } hwEOSNoResponseAlarmResumeTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwLoadBranchEquipId,hwLoadBranchEquipName,hwLoadBranchOperStatus } STATUS current DESCRIPTION "Description." ::= { hwSiteAlarmTrapsPrefix 116 } hwEOSOverLoadAlarmTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwLoadBranchEquipId,hwLoadBranchEquipName,hwLoadBranchOperStatus } STATUS current DESCRIPTION "Description." ::= { hwSiteAlarmTrapsPrefix 117 } hwEOSOverLoadAlarmResumeTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwLoadBranchEquipId,hwLoadBranchEquipName,hwLoadBranchOperStatus } STATUS current DESCRIPTION "Description." ::= { hwSiteAlarmTrapsPrefix 118 } hwInverterAlarmTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwInverterEquipId,hwInverterEquipName,hwInverterOperStatus } STATUS current DESCRIPTION "Description." ::= { hwSiteAlarmTrapsPrefix 119 } hwInveterAlarmResumeTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwInverterEquipId,hwInverterEquipName,hwInverterOperStatus } STATUS current DESCRIPTION "Description." ::= { hwSiteAlarmTrapsPrefix 120 } hwDGAlarmTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwDGEquipId,hwDGEquipName } STATUS current DESCRIPTION "DG Alarm. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm port description, Alarm severity, and Site alarm SN. Additionally, in order to identify the device, Spare digital equipment ID and equipment name are also include in VB(variable bondings)." ::= { hwSiteAlarmTrapsPrefix 121 } hwDGAlarmResumeTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwDGEquipId,hwDGEquipName } STATUS current DESCRIPTION "DG Alarm Resume. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm port description, Alarm severity, and Site alarm SN. Additionally, in order to identify the device, Spare digital equipment ID and equipment name are also include in VB(variable bondings)." ::= { hwSiteAlarmTrapsPrefix 122 } hwSSUSummaryAlarmTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwSSUGroupId,hwSSUGroupName } STATUS current DESCRIPTION "SSU Group Alarm. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm port description, Alarm severity, and Site alarm SN. Additionally, in order to identify the device, Spare digital equipment ID and equipment name are also include in VB(variable bondings)." ::= { hwSiteAlarmTrapsPrefix 123 } hwSSUSummaryAlarmResumeTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwSSUGroupId,hwSSUGroupName } STATUS current DESCRIPTION "SSU Group Resume. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm port description, Alarm severity, and Site alarm SN. Additionally, in order to identify the device, Spare digital equipment ID and equipment name are also include in VB(variable bondings)." ::= { hwSiteAlarmTrapsPrefix 124 } hwSSUAlarmTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwSSUEquipId,hwSSUEquipName } STATUS current DESCRIPTION "SSU Alarm. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm port description, Alarm severity, and Site alarm SN. Additionally, in order to identify the device, Spare digital equipment ID and equipment name are also include in VB(variable bondings)." ::= { hwSiteAlarmTrapsPrefix 125 } hwSSUAlarmResumeTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwSSUEquipId,hwSSUEquipName } STATUS current DESCRIPTION "SSU Alarm Resume. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm port description, Alarm severity, and Site alarm SN. Additionally, in order to identify the device, Spare digital equipment ID and equipment name are also include in VB(variable bondings)." ::= { hwSiteAlarmTrapsPrefix 126 } hwTemp1SensorAlarmTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwTemp1EquipId,hwTemp1EquipName,hwTemp1OperStatus } STATUS current DESCRIPTION "Description." ::= { hwSiteAlarmTrapsPrefix 127 } hwTemp1SensorAlarmResumeTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwTemp1EquipId,hwTemp1EquipName,hwTemp1OperStatus } STATUS current DESCRIPTION "Description." ::= { hwSiteAlarmTrapsPrefix 128 } hwTemp2SensorAlarmTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwTemp2EquipId,hwTemp2EquipName,hwTemp2OperStatus } STATUS current DESCRIPTION "Description." ::= { hwSiteAlarmTrapsPrefix 129 } hwTemp2SensorAlarmResumeTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwTemp2EquipId,hwTemp2EquipName,hwTemp2OperStatus } STATUS current DESCRIPTION "Description." ::= { hwSiteAlarmTrapsPrefix 130 } hwEsduDigitalInputAlarmTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwEsduEquipId,hwEsduEquipName } STATUS current DESCRIPTION "The ESDU Spare digital fault. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm port description, Alarm severity, and Site alarm SN. Additionally, in order to identify the device, Spare digital equipment ID and equipment name are also include in VB(variable bondings). " ::= { hwSiteAlarmTrapsPrefix 147 } hwEsduDigitalInputAlarmResumeTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwEsduEquipId,hwEsduEquipName } STATUS current DESCRIPTION "The ESDU Spare digital alarm resume.Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm port description, Alarm severity, and Site alarm SN. Additionally, in order to identify the device, Spare digital equipment ID and equipment name are also include in VB(variable bondings). " ::= { hwSiteAlarmTrapsPrefix 148 } hwEsduDoorOpenAlarmTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwEsduEquipId,hwEsduEquipName } STATUS current DESCRIPTION "The ESDU door is open." ::= { hwSiteAlarmTrapsPrefix 149 } hwEsduDoorOpenAlarmResumeTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwEsduEquipId,hwEsduEquipName } STATUS current DESCRIPTION "The ESDU door open alarm resumed." ::= { hwSiteAlarmTrapsPrefix 150 } hwEsduTemp1SensorFaultAlarmTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwEsduEquipId,hwEsduEquipName,hwEsduTemp1OperStatus } STATUS current DESCRIPTION "The ESDU TEMP1 sensor is faulty." ::= { hwSiteAlarmTrapsPrefix 151 } hwEsduTemp1SensorFaultAlarmResumeTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwEsduEquipId,hwEsduEquipName,hwEsduTemp1OperStatus } STATUS current DESCRIPTION "The ESDU TEMP1 sensor fault alarm recovers." ::= { hwSiteAlarmTrapsPrefix 152 } hwEsduTemp1SensorMissAlarmTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwEsduEquipId,hwEsduEquipName,hwEsduTemp1OperStatus } STATUS current DESCRIPTION "The ESDU TEMP1 sensor is missing." ::= { hwSiteAlarmTrapsPrefix 153 } hwEsduTemp1SensorMissAlarmResumeTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwEsduEquipId,hwEsduEquipName,hwEsduTemp1OperStatus } STATUS current DESCRIPTION "The ESDU TEMP1 sensor missing alarm recovers." ::= { hwSiteAlarmTrapsPrefix 154 } hwEsduTemp2SensorFaultAlarmTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwEsduEquipId,hwEsduEquipName,hwEsduTemp1OperStatus } STATUS current DESCRIPTION "The ESDU TEMP2 sensor is faulty." ::= { hwSiteAlarmTrapsPrefix 155 } hwEsduTemp2SensorFaultAlarmResumeTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwEsduEquipId,hwEsduEquipName,hwEsduTemp2OperStatus } STATUS current DESCRIPTION "The ESDU TEMP2 sensor fault alarm recovers." ::= { hwSiteAlarmTrapsPrefix 156 } hwEsduTemp2SensorMissAlarmTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwEsduEquipId,hwEsduEquipName,hwEsduTemp2OperStatus } STATUS current DESCRIPTION "The ESDU TEMP2 sensor is missing." ::= { hwSiteAlarmTrapsPrefix 157 } hwEsduTemp2SensorMissAlarmResumeTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwEsduEquipId,hwEsduEquipName,hwEsduTemp2OperStatus } STATUS current DESCRIPTION "The ESDU TEMP2 sensor missing alarm recovers." ::= { hwSiteAlarmTrapsPrefix 158 } hwEsduBtempSensorFaultAlarmTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwEsduEquipId,hwEsduEquipName,hwEsduBtempOperStatus } STATUS current DESCRIPTION "The ESDU BTEMP sensor is faulty." ::= { hwSiteAlarmTrapsPrefix 159 } hwEsduBtempSensorFaultAlarmResumeTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwEsduEquipId,hwEsduEquipName,hwEsduBtempOperStatus } STATUS current DESCRIPTION "The ESDU BTEMP sensor fault alarm recovers." ::= { hwSiteAlarmTrapsPrefix 160 } hwEsduBtempSensorMissAlarmTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwEsduEquipId,hwEsduEquipName,hwEsduBtempOperStatus } STATUS current DESCRIPTION "The ESDU BTEMP sensor is missing." ::= { hwSiteAlarmTrapsPrefix 161 } hwEsduBtempSensorMissAlarmResumeTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwEsduEquipId,hwEsduEquipName,hwEsduBtempOperStatus } STATUS current DESCRIPTION "The ESDU BTEMP sensor missing alarm recovers." ::= { hwSiteAlarmTrapsPrefix 162 } hwEsduTemp1AlarmTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwEsduEquipId,hwEsduEquipName,hwEsduTemp1OperStatus } STATUS current DESCRIPTION "The ESDU TEMP1 temperature is out of range£¨too high or too low£©. " ::= { hwSiteAlarmTrapsPrefix 163 } hwEsduTemp1AlarmResumeTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwEsduEquipId,hwEsduEquipName,hwEsduTemp1OperStatus } STATUS current DESCRIPTION "The ESDU TEMP1 temperature alarm resume. " ::= { hwSiteAlarmTrapsPrefix 164 } hwEsduTemp2AlarmTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwEsduEquipId,hwEsduEquipName,hwEsduTemp2OperStatus } STATUS current DESCRIPTION "The ESDU TEMP2 temperature is out of range£¨too high or too low£©. " ::= { hwSiteAlarmTrapsPrefix 165 } hwEsduTemp2AlarmResumeTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwEsduEquipId,hwEsduEquipName,hwEsduTemp2OperStatus } STATUS current DESCRIPTION "The ESDU TEMP2 temperature alarm resume. " ::= { hwSiteAlarmTrapsPrefix 166 } hwEsduCommAlarmTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwEsduEquipId,hwEsduEquipName } STATUS current DESCRIPTION "The Moniter cannot commuicate with the ESDU." ::= { hwSiteAlarmTrapsPrefix 167 } hwEsduCommAlarmResumeTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwEsduEquipId,hwEsduEquipName } STATUS current DESCRIPTION "The communication between monitor and ESDU recovers." ::= { hwSiteAlarmTrapsPrefix 168 } hwBatteryLowCapacityAlarmTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwBattsGroupId,hwBattsGroupName } STATUS current DESCRIPTION "The capacity of batteries is low." ::= { hwSiteAlarmTrapsPrefix 169 } hwBatteryLowCapacityAlarmResumeTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwBattsGroupId,hwBattsGroupName } STATUS current DESCRIPTION "The alarm of low capacity resumed." ::= { hwSiteAlarmTrapsPrefix 170 } hwBatteryLostAlarmTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwBattStringEquipId,hwBattStringEquipName } STATUS current DESCRIPTION "Some battery strings could be lost, when the alarm happened." ::= { hwSiteAlarmTrapsPrefix 171 } hwBatteryLostAlarmResumeTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwBattStringEquipId,hwBattStringEquipName } STATUS current DESCRIPTION "If all the battery strings can be detected, the alarm of battery losting resume." ::= { hwSiteAlarmTrapsPrefix 172 } hwRectCapacityAlarmTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwRectsGroupId,hwRectsGroupName } STATUS current DESCRIPTION "Low Rectifier Capacity or High Rectifier Capacity Alarm happened." ::= { hwSiteAlarmTrapsPrefix 131 } hwRectCapacityAlarmResumeTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwRectsGroupId,hwRectsGroupName } STATUS current DESCRIPTION "Low Rectifier Capacity or High Rectifier Capacity Alarm Resumed." ::= { hwSiteAlarmTrapsPrefix 132 } hwPvLostAlarmTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription } STATUS current DESCRIPTION "" ::= { hwSiteAlarmTrapsPrefix 181 } hwPvLostAlarmResumeTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription } STATUS current DESCRIPTION "" ::= { hwSiteAlarmTrapsPrefix 182 } hwTcucTempSensorFaultAlarmTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription } STATUS current DESCRIPTION "The TCUC cabient temperature sensor fault alarm happened." ::= { hwSiteAlarmTrapsPrefix 133 } hwTcucTempSensorFaultAlarmResumeTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription } STATUS current DESCRIPTION "The TCUC cabient temperature sensor fault alarm resumed." ::= { hwSiteAlarmTrapsPrefix 134 } hwTcucFanFaultAlarmTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription } STATUS current DESCRIPTION "The TCUC cabient fan fault alarm happened." ::= { hwSiteAlarmTrapsPrefix 135 } hwTcucFanFaultAlarmResumeTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription } STATUS current DESCRIPTION "The TCUC cabient fan fault alarm resumed." ::= { hwSiteAlarmTrapsPrefix 136 } hwTcucTempAbnormalAlarmTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription } STATUS current DESCRIPTION "The TCUC cabinet temperature is too high or too low" ::= { hwSiteAlarmTrapsPrefix 137 } hwTcucTempAbnormalAlarmResumeTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription } STATUS current DESCRIPTION "The TCUC cabinet temperature abnormal alarm resumed." ::= { hwSiteAlarmTrapsPrefix 138 } hwTcucDoorOpenAlarmTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription } STATUS current DESCRIPTION "The TCUC cabinet door is open." ::= { hwSiteAlarmTrapsPrefix 139 } hwTcucDoorOpenAlarmResumeTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription } STATUS current DESCRIPTION "The TCUC cabient door open alarm resumed." ::= { hwSiteAlarmTrapsPrefix 140 } hwTcucSmokeAlarmTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription } STATUS current DESCRIPTION "The TCUC cabient smoke alarm happened." ::= { hwSiteAlarmTrapsPrefix 141 } hwTcucSmokeAlarmResumeTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription } STATUS current DESCRIPTION "The TCUC cabient smoke alarm resumed" ::= { hwSiteAlarmTrapsPrefix 142 } hwTcucWaterAlarmTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription } STATUS current DESCRIPTION "The TCUC cabient water alarm happend." ::= { hwSiteAlarmTrapsPrefix 143 } hwTcucWaterAlarmResumeTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription } STATUS current DESCRIPTION "The TCUC cabient water alarm resumed." ::= { hwSiteAlarmTrapsPrefix 144 } hwTcucCommFailAlarmTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription } STATUS current DESCRIPTION "The TCUC cabient failed communicate with the monitor." ::= { hwSiteAlarmTrapsPrefix 145 } hwTcucCommFailAlarmResumeTraps NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription } STATUS current DESCRIPTION "The TCUC cabient communication fail alarm resumed." ::= { hwSiteAlarmTrapsPrefix 146 } hwAtsAlarmTrap NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwAtsEquipId,hwAtsEquipName } STATUS current DESCRIPTION "ATS Alarm. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm port description, Alarm severity, and Site alarm SN. Additionally, in order to identify the device, Spare digital equipment ID and equipment name are also include in VB(variable bondings)." ::= { hwSiteAlarmTrapsPrefix 187 } hwAtsAlarmResumeTrap NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwAtsEquipId,hwAtsEquipName } STATUS current DESCRIPTION "ATS Alarm Resume. Its correlation binding parameters: Site ID, Site name, Site description, NE ID, Alarm name, Alarm single description, Alarm port description, Alarm severity, and Site alarm SN. Additionally, in order to identify the device, Spare digital equipment ID and equipment name are also include in VB(variable bondings)." ::= { hwSiteAlarmTrapsPrefix 188 } hwInverterTrapTable OBJECT IDENTIFIER ::= { hwSiteAlarmTraps 4 } hwInverterTrapPrefix OBJECT IDENTIFIER ::= { hwInverterTrapTable 0 } hwInverterCommFailAlarmTrap NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwInverterEquipId,hwInverterEquipName } STATUS current DESCRIPTION "Communication Failure. Its correlation binding parameters: Site alarm serial number (SN), Alarm name, Alarm level, Site name, Site administrant address, NE ID, Site description, Additionally, in order to identify the device, rectifier equipment ID and equipment name are also include in VB(variable bondings)." ::= { hwInverterTrapPrefix 1 } hwInverterCommFailAlarmResumeTrap NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwInverterEquipId,hwInverterEquipName } STATUS current DESCRIPTION "Communication Failure Resume. Its correlation binding parameters: Site alarm serial number (SN), Alarm name, Alarm level, Site name, Site administrant address, NE ID, Site description, Additionally, in order to identify the device, rectifier equipment ID and equipment name are also include in VB(variable bondings)." ::= { hwInverterTrapPrefix 2 } hwInverterFanFaultAlarmTrap NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwInverterEquipId,hwInverterEquipName } STATUS current DESCRIPTION "Fan Failure. Its correlation binding parameters: Site alarm serial number (SN), Alarm name, Alarm level, Site name, Site administrant address, NE ID, Site description, Additionally, in order to identify the device, rectifier equipment ID and equipment name are also include in VB(variable bondings)." ::= { hwInverterTrapPrefix 3 } hwInverterFanFaultAlarmResumeTrap NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwInverterEquipId,hwInverterEquipName } STATUS current DESCRIPTION "Fan Failure Resume. Its correlation binding parameters: Site alarm serial number (SN), Alarm name, Alarm level, Site name, Site administrant address, NE ID, Site description, Additionally, in order to identify the device, rectifier equipment ID and equipment name are also include in VB(variable bondings)." ::= { hwInverterTrapPrefix 4 } hwInverterACOutLowAlarmTrap NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwInverterEquipId,hwInverterEquipName } STATUS current DESCRIPTION "AC Output Undervoltage. Its correlation binding parameters: Site alarm serial number (SN), Alarm name, Alarm level, Site name, Site administrant address, NE ID, Site description, Additionally, in order to identify the device, rectifier equipment ID and equipment name are also include in VB(variable bondings)." ::= { hwInverterTrapPrefix 5 } hwInverterACOutLowAlarmResumeTrap NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwInverterEquipId,hwInverterEquipName } STATUS current DESCRIPTION "AC Output Undervoltage Resume. Its correlation binding parameters: Site alarm serial number (SN), Alarm name, Alarm level, Site name, Site administrant address, NE ID, Site description, Additionally, in order to identify the device, rectifier equipment ID and equipment name are also include in VB(variable bondings)." ::= { hwInverterTrapPrefix 6 } hwInverterACOutHighAlarmTrap NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwInverterEquipId,hwInverterEquipName } STATUS current DESCRIPTION "AC Output Overvoltage. Its correlation binding parameters: Site alarm serial number (SN), Alarm name, Alarm level, Site name, Site administrant address, NE ID, Site description, Additionally, in order to identify the device, rectifier equipment ID and equipment name are also include in VB(variable bondings)." ::= { hwInverterTrapPrefix 7 } hwInverterACOutHighAlarmResumeTrap NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwInverterEquipId,hwInverterEquipName } STATUS current DESCRIPTION "AC Output Overvoltage Resume. Its correlation binding parameters: Site alarm serial number (SN), Alarm name, Alarm level, Site name, Site administrant address, NE ID, Site description, Additionally, in order to identify the device, rectifier equipment ID and equipment name are also include in VB(variable bondings)." ::= { hwInverterTrapPrefix 8 } hwInverterModFaultAlarmTrap NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwInverterEquipId,hwInverterEquipName } STATUS current DESCRIPTION "Module Fault. Its correlation binding parameters: Site alarm serial number (SN), Alarm name, Alarm level, Site name, Site administrant address, NE ID, Site description, Additionally, in order to identify the device, rectifier equipment ID and equipment name are also include in VB(variable bondings)." ::= { hwInverterTrapPrefix 9 } hwInverterModFaultAlarmResumeTrap NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwInverterEquipId,hwInverterEquipName } STATUS current DESCRIPTION "Module Fault Resume. Its correlation binding parameters: Site alarm serial number (SN), Alarm name, Alarm level, Site name, Site administrant address, NE ID, Site description, Additionally, in order to identify the device, rectifier equipment ID and equipment name are also include in VB(variable bondings)." ::= { hwInverterTrapPrefix 10 } hwInverterModTempHighAlarmTrap NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwInverterEquipId,hwInverterEquipName } STATUS current DESCRIPTION "Temperature Too High. Its correlation binding parameters: Site alarm serial number (SN), Alarm name, Alarm level, Site name, Site administrant address, NE ID, Site description, Additionally, in order to identify the device, rectifier equipment ID and equipment name are also include in VB(variable bondings)." ::= { hwInverterTrapPrefix 11 } hwInverterModTempHighAlarmResumeTrap NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwInverterEquipId,hwInverterEquipName } STATUS current DESCRIPTION "Temperature Too High Resume. Its correlation binding parameters: Site alarm serial number (SN), Alarm name, Alarm level, Site name, Site administrant address, NE ID, Site description, Additionally, in order to identify the device, rectifier equipment ID and equipment name are also include in VB(variable bondings)." ::= { hwInverterTrapPrefix 12 } hwInverterModTempLowAlarmTrap NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwInverterEquipId,hwInverterEquipName } STATUS current DESCRIPTION "Temperature Too Low. Its correlation binding parameters: Site alarm serial number (SN), Alarm name, Alarm level, Site name, Site administrant address, NE ID, Site description, Additionally, in order to identify the device, rectifier equipment ID and equipment name are also include in VB(variable bondings)." ::= { hwInverterTrapPrefix 13 } hwInverterModTempLowAlarmResumeTrap NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwInverterEquipId,hwInverterEquipName } STATUS current DESCRIPTION "Temperature Too Low Resume. Its correlation binding parameters: Site alarm serial number (SN), Alarm name, Alarm level, Site name, Site administrant address, NE ID, Site description, Additionally, in order to identify the device, rectifier equipment ID and equipment name are also include in VB(variable bondings)." ::= { hwInverterTrapPrefix 14 } hwInvertersACPhaseShortAlarmTrap NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwInverterEquipId,hwInverterEquipName } STATUS current DESCRIPTION "AC Input Phase Not Ready. Its correlation binding parameters: Site alarm serial number (SN), Alarm name, Alarm level, Site name, Site administrant address, NE ID, Site description, Additionally, in order to identify the device, rectifier equipment ID and equipment name are also include in VB(variable bondings)." ::= { hwInverterTrapPrefix 15 } hwInvertersACPhaseShortAlarmResumeTrap NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwInverterEquipId,hwInverterEquipName } STATUS current DESCRIPTION "AC Input Phase Not Ready Resume. Its correlation binding parameters: Site alarm serial number (SN), Alarm name, Alarm level, Site name, Site administrant address, NE ID, Site description, Additionally, in order to identify the device, rectifier equipment ID and equipment name are also include in VB(variable bondings)." ::= { hwInverterTrapPrefix 16 } hwInverterModOffAlarmTrap NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwInverterEquipId,hwInverterEquipName } STATUS current DESCRIPTION "Module Off. Its correlation binding parameters: Site alarm serial number (SN), Alarm name, Alarm level, Site name, Site administrant address, NE ID, Site description, Additionally, in order to identify the device, rectifier equipment ID and equipment name are also include in VB(variable bondings)." ::= { hwInverterTrapPrefix 17 } hwInverterModOffAlarmResumeTrap NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwInverterEquipId,hwInverterEquipName } STATUS current DESCRIPTION "Module Off Resume. Its correlation binding parameters: Site alarm serial number (SN), Alarm name, Alarm level, Site name, Site administrant address, NE ID, Site description, Additionally, in order to identify the device, rectifier equipment ID and equipment name are also include in VB(variable bondings)." ::= { hwInverterTrapPrefix 18 } hwInverterACInAbnAlarmTrap NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwInverterEquipId,hwInverterEquipName } STATUS current DESCRIPTION "AC Input Abnormal. Its correlation binding parameters: Site alarm serial number (SN), Alarm name, Alarm level, Site name, Site administrant address, NE ID, Site description, Additionally, in order to identify the device, rectifier equipment ID and equipment name are also include in VB(variable bondings)." ::= { hwInverterTrapPrefix 19 } hwInverterACInAbnAlarmResumeTrap NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwInverterEquipId,hwInverterEquipName } STATUS current DESCRIPTION "AC Input Abnormal Resume. Its correlation binding parameters: Site alarm serial number (SN), Alarm name, Alarm level, Site name, Site administrant address, NE ID, Site description, Additionally, in order to identify the device, rectifier equipment ID and equipment name are also include in VB(variable bondings)." ::= { hwInverterTrapPrefix 20 } hwInverterDCInLowAlarmTrap NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwInverterEquipId,hwInverterEquipName } STATUS current DESCRIPTION "DC Input Undervoltage. Its correlation binding parameters: Site alarm serial number (SN), Alarm name, Alarm level, Site name, Site administrant address, NE ID, Site description, Additionally, in order to identify the device, rectifier equipment ID and equipment name are also include in VB(variable bondings)." ::= { hwInverterTrapPrefix 21 } hwInverteDCInLowAlarmResumeTrap NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwInverterEquipId,hwInverterEquipName } STATUS current DESCRIPTION "DC Input Undervoltage Resume. Its correlation binding parameters: Site alarm serial number (SN), Alarm name, Alarm level, Site name, Site administrant address, NE ID, Site description, Additionally, in order to identify the device, rectifier equipment ID and equipment name are also include in VB(variable bondings)." ::= { hwInverterTrapPrefix 22 } hwInverterDCInHighAlarmTrap NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwInverterEquipId,hwInverterEquipName } STATUS current DESCRIPTION "DC Input Overvoltage. Its correlation binding parameters: Site alarm serial number (SN), Alarm name, Alarm level, Site name, Site administrant address, NE ID, Site description, Additionally, in order to identify the device, rectifier equipment ID and equipment name are also include in VB(variable bondings)." ::= { hwInverterTrapPrefix 23 } hwInverterDCInHighAlarmResumeTrap NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwInverterEquipId,hwInverterEquipName } STATUS current DESCRIPTION "DC Input Overvoltage Resume. Its correlation binding parameters: Site alarm serial number (SN), Alarm name, Alarm level, Site name, Site administrant address, NE ID, Site description, Additionally, in order to identify the device, rectifier equipment ID and equipment name are also include in VB(variable bondings)." ::= { hwInverterTrapPrefix 24 } hwInverterModCommFailAlarmTrap NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwInverterEquipId,hwInverterEquipName } STATUS current DESCRIPTION "Module Communication Failure. Its correlation binding parameters: Site alarm serial number (SN), Alarm name, Alarm level, Site name, Site administrant address, NE ID, Site description, Additionally, in order to identify the device, rectifier equipment ID and equipment name are also include in VB(variable bondings)." ::= { hwInverterTrapPrefix 25 } hwInverterModCommFailAlarmResumeTrap NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwInverterEquipId,hwInverterEquipName } STATUS current DESCRIPTION "Module Communication Failure Resume. Its correlation binding parameters: Site alarm serial number (SN), Alarm name, Alarm level, Site name, Site administrant address, NE ID, Site description, Additionally, in order to identify the device, rectifier equipment ID and equipment name are also include in VB(variable bondings)." ::= { hwInverterTrapPrefix 26 } hwInverterNoACInAlarmTrap NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwInverterEquipId,hwInverterEquipName } STATUS current DESCRIPTION "No AC In. Its correlation binding parameters: Site alarm serial number (SN), Alarm name, Alarm level, Site name, Site administrant address, NE ID, Site description, Additionally, in order to identify the device, rectifier equipment ID and equipment name are also include in VB(variable bondings)." ::= { hwInverterTrapPrefix 27 } hwInverterNoACInAlarmResumeTrap NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwInverterEquipId,hwInverterEquipName } STATUS current DESCRIPTION "No AC In Resume. Its correlation binding parameters: Site alarm serial number (SN), Alarm name, Alarm level, Site name, Site administrant address, NE ID, Site description, Additionally, in order to identify the device, rectifier equipment ID and equipment name are also include in VB(variable bondings)." ::= { hwInverterTrapPrefix 28 } hwInverterNoDCInAlarmTrap NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwInverterEquipId,hwInverterEquipName } STATUS current DESCRIPTION "No DC In. Its correlation binding parameters: Site alarm serial number (SN), Alarm name, Alarm level, Site name, Site administrant address, NE ID, Site description, Additionally, in order to identify the device, rectifier equipment ID and equipment name are also include in VB(variable bondings)." ::= { hwInverterTrapPrefix 29 } hwInverterNoDCInAlarmResumeTrap NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwInverterEquipId,hwInverterEquipName } STATUS current DESCRIPTION "No DC In Resume. Its correlation binding parameters: Site alarm serial number (SN), Alarm name, Alarm level, Site name, Site administrant address, NE ID, Site description, Additionally, in order to identify the device, rectifier equipment ID and equipment name are also include in VB(variable bondings)." ::= { hwInverterTrapPrefix 30 } hwInverterT2SFaultAlarmTrap NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwInverterEquipId,hwInverterEquipName } STATUS current DESCRIPTION "T2S Fault. Its correlation binding parameters: Site alarm serial number (SN), Alarm name, Alarm level, Site name, Site administrant address, NE ID, Site description, Additionally, in order to identify the device, rectifier equipment ID and equipment name are also include in VB(variable bondings)." ::= { hwInverterTrapPrefix 31 } hwInverterT2SFaultAlarmResumeTrap NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwInverterEquipId,hwInverterEquipName } STATUS current DESCRIPTION "T2S Fault Resume. Its correlation binding parameters: Site alarm serial number (SN), Alarm name, Alarm level, Site name, Site administrant address, NE ID, Site description, Additionally, in order to identify the device, rectifier equipment ID and equipment name are also include in VB(variable bondings)." ::= { hwInverterTrapPrefix 32 } hwInvertModMissAlarmTrap NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwInverterEquipId,hwInverterEquipName } STATUS current DESCRIPTION "Missing Module. Its correlation binding parameters: Site alarm serial number (SN), Alarm name, Alarm level, Site name, Site administrant address, NE ID, Site description, Additionally, in order to identify the device, rectifier equipment ID and equipment name are also include in VB(variable bondings)." ::= { hwInverterTrapPrefix 33 } hwInvertModMissAlarmResumeTrap NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwInverterEquipId,hwInverterEquipName } STATUS current DESCRIPTION "Missing Module Resume. Its correlation binding parameters: Site alarm serial number (SN), Alarm name, Alarm level, Site name, Site administrant address, NE ID, Site description, Additionally, in order to identify the device, rectifier equipment ID and equipment name are also include in VB(variable bondings)." ::= { hwInverterTrapPrefix 34 } hwIboxAlmTrapTable OBJECT IDENTIFIER ::= { hwSiteAlarmTraps 6 } hwIboxAlmTrapPrefix OBJECT IDENTIFIER ::= { hwIboxAlmTrapTable 0 } hwIboxCommFailAlarmTrap NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwIboxEquipId,hwIboxEquipName } STATUS current DESCRIPTION "Ibox Communication Failure. Its correlation binding parameters: Site alarm serial number (SN), Alarm name, Alarm level, Site name, Site administrant address, NE ID, Site description, Additionally, in order to identify the device, rectifier equipment ID and equipment name are also include in VB(variable bondings)." ::= { hwIboxAlmTrapPrefix 1 } hwIboxCommFailAlarmResumeTrap NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwIboxEquipId,hwIboxEquipName } STATUS current DESCRIPTION "Ibox Communication Failure Resume. Its correlation binding parameters: Site alarm serial number (SN), Alarm name, Alarm level, Site name, Site administrant address, NE ID, Site description, Additionally, in order to identify the device, rectifier equipment ID and equipment name are also include in VB(variable bondings)." ::= { hwIboxAlmTrapPrefix 2 } hwIbatAlmTrapTable OBJECT IDENTIFIER ::= { hwSiteAlarmTraps 7 } hwIbatAlmTrapPrefix OBJECT IDENTIFIER ::= { hwIbatAlmTrapTable 0 } hwIbatAlarmTrap NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwIbatEquipId,hwIbatEquipName } STATUS current DESCRIPTION "Ibat Communication Failure. Its correlation binding parameters: Site alarm serial number (SN), Alarm name, Alarm level, Site name, Site administrant address, NE ID, Site description, Additionally, in order to identify the device, rectifier equipment ID and equipment name are also include in VB(variable bondings)." ::= { hwIbatAlmTrapPrefix 1 } hwIbatAlarmResumeTrap NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwIbatEquipId,hwIbatEquipName } STATUS current DESCRIPTION "Ibat Communication Failure Resume. Its correlation binding parameters: Site alarm serial number (SN), Alarm name, Alarm level, Site name, Site administrant address, NE ID, Site description, Additionally, in order to identify the device, rectifier equipment ID and equipment name are also include in VB(variable bondings)." ::= { hwIbatAlmTrapPrefix 2 } hwAcAmmeterAlmTrapTable OBJECT IDENTIFIER ::= { hwSiteAlarmTraps 8 } hwAcAmmeterAlmTrapPrefix OBJECT IDENTIFIER ::= { hwAcAmmeterAlmTrapTable 0 } hwAcAmmeterAlarmTrap NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwAcAmmeterEquipId,hwAcAmmeterEquipName } STATUS current DESCRIPTION "Ac Ammeter. Its correlation binding parameters: Site alarm serial number (SN), Alarm name, Alarm level, Site name, Site administrant address, NE ID, Site description, Additionally, in order to identify the device, rectifier equipment ID and equipment name are also include in VB(variable bondings)." ::= { hwAcAmmeterAlmTrapPrefix 1 } hwAcAmmeterAlarmResumeTrap NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwAcAmmeterEquipId,hwAcAmmeterEquipName } STATUS current DESCRIPTION "Ac Ammeter . Its correlation binding parameters: Site alarm serial number (SN), Alarm name, Alarm level, Site name, Site administrant address, NE ID, Site description, Additionally, in order to identify the device, rectifier equipment ID and equipment name are also include in VB(variable bondings)." ::= { hwAcAmmeterAlmTrapPrefix 2 } hwCommExBoardAlmTrapTable OBJECT IDENTIFIER ::= { hwSiteAlarmTraps 9 } hwCommExBoardAlmTrapPrefix OBJECT IDENTIFIER ::= { hwCommExBoardAlmTrapTable 0 } hwCommExBoardCommFailAlarmTrap NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwCommExBoardEquipId,hwCommExBoardEquipName } STATUS current DESCRIPTION "Communication Expansion Board Communication Failure Its correlation binding parameters: Site alarm serial number (SN), Alarm name, Alarm level, Site name, Site administrant address, NE ID, Site description, Additionally, in order to identify the device, rectifier equipment ID and equipment name are also include in VB(variable bondings)." ::= { hwCommExBoardAlmTrapPrefix 1 } hwCommExBoardCommFailAlarmResumeTrap NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwCommExBoardEquipId,hwCommExBoardEquipName } STATUS current DESCRIPTION "Communication Expansion Board Communication Failure Resume. Its correlation binding parameters: Site alarm serial number (SN), Alarm name, Alarm level, Site name, Site administrant address, NE ID, Site description, Additionally, in order to identify the device, rectifier equipment ID and equipment name are also include in VB(variable bondings)." ::= { hwCommExBoardAlmTrapPrefix 2 } hwDGCommExBoardAlmTrapTable OBJECT IDENTIFIER ::= { hwSiteAlarmTraps 10 } hwDGCommExBoardAlmTrapPrefix OBJECT IDENTIFIER ::= { hwDGCommExBoardAlmTrapTable 0 } hwDGCommExBoardCommFailAlarmTrap NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwDGCommExBoardEquipId,hwDGCommExBoardEquipName } STATUS current DESCRIPTION "DG Comm Ex Board Communication Failure. Its correlation binding parameters: Site alarm serial number (SN), Alarm name, Alarm level, Site name, Site administrant address, NE ID, Site description, Additionally, in order to identify the device, rectifier equipment ID and equipment name are also include in VB(variable bondings)." ::= { hwDGCommExBoardAlmTrapPrefix 1 } hwDGCommExBoardCommFailAlarmResumeTrap NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwDGCommExBoardEquipId,hwDGCommExBoardEquipName } STATUS current DESCRIPTION "DG Comm Ex Board Communication Failure Resume. Its correlation binding parameters: Site alarm serial number (SN), Alarm name, Alarm level, Site name, Site administrant address, NE ID, Site description, Additionally, in order to identify the device, rectifier equipment ID and equipment name are also include in VB(variable bondings)." ::= { hwDGCommExBoardAlmTrapPrefix 2 } hwAcbGroupAlmTrapTable OBJECT IDENTIFIER ::= { hwSiteAlarmTraps 2 } hwAcbGroupAlmTrapTablePrefix OBJECT IDENTIFIER ::= { hwAcbGroupAlmTrapTable 0 } hwAcbGroupAlarmTrap NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwAcbGroupEquipId,hwAcbGroupEquipName } STATUS current DESCRIPTION "/" ::= { hwAcbGroupAlmTrapTablePrefix 99 } hwAcbGroupAarlmResumeTrap NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwAcbGroupEquipId,hwAcbGroupEquipName } STATUS current DESCRIPTION "/" ::= { hwAcbGroupAlmTrapTablePrefix 100 } hwAcbAlmTrapTable OBJECT IDENTIFIER ::= { hwSiteAlarmTraps 3 } hwAcbAlmTrapTablePrefix OBJECT IDENTIFIER ::= { hwAcbAlmTrapTable 0 } hwAcbAlarmTrap NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwAcbEquipId,hwAcbEquipName } STATUS current DESCRIPTION "/" ::= { hwAcbAlmTrapTablePrefix 99 } hwAcbAarlmResumeTrap NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwAcbEquipId,hwAcbEquipName } STATUS current DESCRIPTION "/" ::= { hwAcbAlmTrapTablePrefix 100 } hwElockAlmTrapTable OBJECT IDENTIFIER ::= { hwSiteAlarmTraps 13 } hwElockAlmTrapTablePrefix OBJECT IDENTIFIER ::= { hwElockAlmTrapTable 0 } hwElockAlarmTrap NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwElockEquipId,hwElockEquipName } STATUS current DESCRIPTION "/" ::= { hwElockAlmTrapTablePrefix 1 } hwElockAlarmResumeTrap NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwElockEquipId,hwElockEquipName } STATUS current DESCRIPTION "/" ::= { hwElockAlmTrapTablePrefix 2 } hwTemHumAlmTrapTable OBJECT IDENTIFIER ::= { hwSiteAlarmTraps 14 } hwTemHumAlmTrapTablePrefix OBJECT IDENTIFIER ::= { hwTemHumAlmTrapTable 0 } hwTemHumAlarmTrap NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwTemHumEquipId,hwTemHumEquipName } STATUS current DESCRIPTION "/" ::= { hwTemHumAlmTrapTablePrefix 1 } hwTemHumAlarmResumeTrap NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwTemHumEquipId,hwTemHumEquipName } STATUS current DESCRIPTION "/" ::= { hwTemHumAlmTrapTablePrefix 2 } hwSiteDevicesTraps OBJECT IDENTIFIER ::= { hwSiteMonitorMIBTraps 2 } hwDevicesTrapsPrefix OBJECT IDENTIFIER ::= { hwSiteDevicesTraps 0 } hwRectifiersInslotChange NOTIFICATION-TYPE OBJECTS { hwDeviceTrapOrdinalNumber,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwRectEquipId,hwRectEquipName,hwRectOperStatus } STATUS current DESCRIPTION "When the presence status of a rectifier changes, the node reports an event. Then the NMS adds or deletes the corresponding entry to or from hwRectConfigTable or hwRectOperTable. The bound information includes the site address, site name, site description, and NE identifier. In addition, the ID, name, and status of the rectifier are bound to identify the specific rectifier and its operation type. When an entry is added, the device status is reported as normal (1); when an entry is deleted, the device status is reported as commFail (4). This trap is the unique trigger condition that causes the NMS to add or delete entries to or from hwRectConfigTable or hwRectOperTable. " ::= { hwDevicesTrapsPrefix 1 } hwBatterysInslotChange NOTIFICATION-TYPE OBJECTS { hwDeviceTrapOrdinalNumber,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwBattStringEquipId,hwBattStringEquipName,hwBattStringOperStatus } STATUS current DESCRIPTION "When the presence status of a battery string changes, the node reports an event. Then the NMS adds or deletes the corresponding entry to or from hwBatttConfigTable or hwBatttOperTable. The bound information includes the site address, site name, site description, and NE identifier. In addition, the ID, name, and status of the battery string are bound to identify the specific battery string and its operation type. When an entry is added, the device status is reported as normal (1); when an entry is deleted, the device status is reported as loopBreak (4). This trap is the unique trigger condition that causes the NMS to add or delete entries to or from hwBatttConfigTable or hwBatttOperTable." ::= { hwDevicesTrapsPrefix 2 } hwBattTestRecordsAdd NOTIFICATION-TYPE OBJECTS { hwDeviceTrapOrdinalNumber,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription } STATUS current DESCRIPTION "After a new discharge test is conducted on a battery group, the node reports an event. The bound information includes the site address, site name, site description, and NE identifier. The NMS needs to add the corresponding entry to the battery test table. The test records are sorted by time in descending order. The battery test table holds a maximum of 10 test records. If the number of test records exceeds 10, the earlier records starting from the last but one record are deleted at a time because the last record is saved permanently. This trap is the unique trigger condition that causes the NMS to add entries from hwBattsTestResultTable. The battery test table allows you only to add entries." ::= { hwDevicesTrapsPrefix 3 } hwEnvTempSensInslotChange NOTIFICATION-TYPE OBJECTS { hwDeviceTrapOrdinalNumber,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwEnvTempEquipId,hwEnvTempEquipName,hwEnvTempSensorOperStatus } STATUS current DESCRIPTION "When the presence status of an environment temperature sensor changes, the node reports an event. Then the NMS adds or deletes the corresponding entry to or from hwEvnTempSensorTable. The bound information includes the site address, site name, site description, and NE identifier. In addition, the ID, name, and status of the environment temperature sensor are bound to identify the specific environment temperature sensor and its operation type. When an entry is added, the device status is reported as normal (1); when an entry is deleted, the device status is reported as notInslot (4). This trap is the unique trigger condition that causes the NMS to add or delete entries to or from hwEnvTempSensorTable." ::= { hwDevicesTrapsPrefix 4 } hwEnvHumiSensInslotChange NOTIFICATION-TYPE OBJECTS { hwDeviceTrapOrdinalNumber,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwEnvHumiEquipId,hwEnvHumiEquipName,hwEnvHumiSensorOperStatus } STATUS current DESCRIPTION "When the presence status of an environment humidity sensor changes, the trap reports an event. Then the NMS adds or deletes the corresponding entry to or from hwEvnHumiSensorTable. The bound information includes the site address, site name, site description, and NE identifier. In addition, the ID, name, and status of the environment humidity sensor are bound to identify the specific environment humidity sensor and its operation type. When an entry is added, the device status is reported as normal (1); when an entry is deleted, the device status is reported as notInslot (4). This trap is the unique trigger condition that causes the NMS to add or delete entries to or from hwEnvHumiSensorTable." ::= { hwDevicesTrapsPrefix 5 } hwPDEsInslotChange NOTIFICATION-TYPE OBJECTS { hwDeviceTrapOrdinalNumber,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription } STATUS current DESCRIPTION "Description." ::= { hwDevicesTrapsPrefix 6 } hwInvertersInslotChange NOTIFICATION-TYPE OBJECTS { hwDeviceTrapOrdinalNumber,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwInverterEquipId,hwInverterEquipName,hwInverterOperStatus } STATUS current DESCRIPTION "Description." ::= { hwDevicesTrapsPrefix 7 } hwSiteStatusTrap OBJECT IDENTIFIER ::= { hwSiteMonitorMIBTraps 3 } hwSiteStatusTrapPrefix OBJECT IDENTIFIER ::= { hwSiteStatusTrap 0 } hwAcInputFaultTrap NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwAcEquipId,hwAcEquipName,hwAcInputOperStatus,hwAcInputStatus } STATUS current DESCRIPTION "" ::= { hwSiteStatusTrapPrefix 1 } hwRectifierFaultTrap NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwRectifierStatus } STATUS current DESCRIPTION "" ::= { hwSiteStatusTrapPrefix 2 } hwBatteryDischargeTrap NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwBattsGroupId,hwBattsGroupName,hwBatteryDischarge } STATUS current DESCRIPTION "" ::= { hwSiteStatusTrapPrefix 3 } hwBatteryLowVoltageTrap NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwBatteryLowVoltage } STATUS current DESCRIPTION "" ::= { hwSiteStatusTrapPrefix 4 } hwBatteryUltraLowVoltageTrap NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwBatteryUltraLowVoltage } STATUS current DESCRIPTION "" ::= { hwSiteStatusTrapPrefix 5 } hwBatteryDisconnectTrap NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwBatteryDisconnect } STATUS current DESCRIPTION "" ::= { hwSiteStatusTrapPrefix 6 } hwFuseBrokenTrap NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwFuseBroken } STATUS current DESCRIPTION "" ::= { hwSiteStatusTrapPrefix 7 } hwLowRecitiferCapacityTrap NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwRectsGroupId,hwRectsGroupName,hwLowRecitiferCapacity } STATUS current DESCRIPTION "" ::= { hwSiteStatusTrapPrefix 8 } hwBatteryTestNegativeTrap NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwBattsGroupId,hwBattsGroupName,hwBatteryTestNegative } STATUS current DESCRIPTION "" ::= { hwSiteStatusTrapPrefix 9 } hwUrgentAlarmTrap NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwUrgentAlarmStatus } STATUS current DESCRIPTION "" ::= { hwSiteStatusTrapPrefix 10 } hwNonurgentAlarmTrap NOTIFICATION-TYPE OBJECTS { hwAlarmTrapOrdinalNumber,hwAlarmText,hwAlarmLevel,hwAlarmSigDesc,hwSiteName,hwSiteAdminAddr,hwNetIdentifier,hwSiteDescription,hwNonurgentAlarmStatus } STATUS current DESCRIPTION "" ::= { hwSiteStatusTrapPrefix 11 } hwSiteEquip OBJECT IDENTIFIER ::= { hwSiteMonitorMIB 3 } hwSiteCameraTable OBJECT-TYPE SYNTAX SEQUENCE OF HwSiteCameraEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "/" ::= { hwSiteEquip 1 } hwSiteCameraEntry OBJECT-TYPE SYNTAX HwSiteCameraEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "/" INDEX { hwSiteCameraIp } ::= { hwSiteCameraTable 1 } HwSiteCameraEntry ::= SEQUENCE { hwSiteCameraIp OCTET STRING, hwSiteCameraPort INTEGER, hwSiteCameraPhotSetAlarmType INTEGER, hwSiteCameraAssociatedAlarmPicture1 OCTET STRING, hwSiteCameraAssociatedAlarmPicture2 OCTET STRING, hwSiteCameraAssociatedAlarmPicture3 OCTET STRING, hwSiteCameraAssociatedAlarmPicture4 OCTET STRING, hwSiteCameraAssociatedAlarmPicture5 OCTET STRING, hwSiteCameraAssociatedAlarmPicture6 OCTET STRING, hwSiteCameraAssociatedAlarmPicture7 OCTET STRING, hwSiteCameraAssociatedAlarmPicture8 OCTET STRING, hwSiteCameraAssociatedAlarmPicture9 OCTET STRING, hwSiteCameraAssociatedAlarmPicture10 OCTET STRING, hwSiteCameraAdditionalAssociatedAlarmPictures OCTET STRING } hwSiteCameraIp OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "the camera ip adress." ::= { hwSiteCameraEntry 1 } hwSiteCameraPort OBJECT-TYPE SYNTAX INTEGER { nim1com1(1), nim1com2(2), nim2com1(3), nim2com2(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "camera connect port number." ::= { hwSiteCameraEntry 2 } hwSiteCameraPhotSetAlarmType OBJECT-TYPE SYNTAX INTEGER { dooralarm(1), smokealarm(2), wateralarm(3), motiondetectalarm(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "You can set the alarm type to obtain the historical picture of the camera-related alarm shooting." ::= { hwSiteCameraEntry 5 } hwSiteCameraAssociatedAlarmPicture1 OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Associated alarm picture 1." ::= { hwSiteCameraEntry 6 } hwSiteCameraAssociatedAlarmPicture2 OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Associated alarm picture 2." ::= { hwSiteCameraEntry 7 } hwSiteCameraAssociatedAlarmPicture3 OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Associated alarm picture 3." ::= { hwSiteCameraEntry 8 } hwSiteCameraAssociatedAlarmPicture4 OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Associated alarm picture 4." ::= { hwSiteCameraEntry 9 } hwSiteCameraAssociatedAlarmPicture5 OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Associated alarm picture 5." ::= { hwSiteCameraEntry 10 } hwSiteCameraAssociatedAlarmPicture6 OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Associated alarm picture 6." ::= { hwSiteCameraEntry 11 } hwSiteCameraAssociatedAlarmPicture7 OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Associated alarm picture 7." ::= { hwSiteCameraEntry 12 } hwSiteCameraAssociatedAlarmPicture8 OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Associated alarm picture 8." ::= { hwSiteCameraEntry 13 } hwSiteCameraAssociatedAlarmPicture9 OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Associated alarm picture 9." ::= { hwSiteCameraEntry 14 } hwSiteCameraAssociatedAlarmPicture10 OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Associated alarm picture 10." ::= { hwSiteCameraEntry 15 } hwSiteCameraAdditionalAssociatedAlarmPictures OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Additional associated alarm pictures." ::= { hwSiteCameraEntry 16 } END