-- **************************************************************************** -- -- Virtual Connect Domain MIB -- -- Copyright 2008-2016 Hewlett Packard Enterprise Development LP -- -- -- **************************************************************************** HPVC-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Integer32, Unsigned32, NOTIFICATION-TYPE, Counter32, Gauge32, mib-2, zeroDotZero FROM SNMPv2-SMI TEXTUAL-CONVENTION, TruthValue, RowPointer, TimeStamp FROM SNMPv2-TC SnmpAdminString FROM SNMP-FRAMEWORK-MIB enterprises FROM RFC1155-SMI TransportAddressType, TransportAddress FROM TRANSPORT-ADDRESS-MIB MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF; vcDomainMIB MODULE-IDENTITY LAST-UPDATED "201704050000Z" -- 05 April 2017 ORGANIZATION "Hewlett Packard Enterprise" CONTACT-INFO "Contact HPE Support" DESCRIPTION "This MIB module describes Virtual Connect (VC) domain level MIB objects for HPE Virtual Connect Manager (VCM). The VCM is responsible for managing an entire Virtual Connect (VC) domain. This MIB module reports all managed objects with in the VC domain,such as VC Ethernet modules (Enet), VC FibreChannel (FC) modules, Physical Servers, network, fabrics, server profiles and associations between various VC objects. Keeping the limitations of SMI specifications in mind, the complex relationships between VC objects are represented in the form of mapping tables with appropriate index values to indicate the associations." -- Revision History REVISION "201704050000Z" -- 05 April 2017 DESCRIPTION "Updated descriptions for VcManagedStatus for each enumeration." REVISION "201702280000Z" -- 28 February 2017 DESCRIPTION "Added new reason codes to VcProfileReasonCodeType; vcProfileConnectionDuplicateIscsiInitiatorNameIP, vcProfileConnectionDuplicateIscsiInitiatorName, vcProfileConnectionDuplicateIscsiInitiatorIP." REVISION "201608100000Z" -- 10 August 2016 DESCRIPTION "Added vcDomainInvalidPXEBootOrderProfileConnection to VcDomainReasonCodeType and vcProfileConnectionInvalidPXEBootOrder to VcProfileReasonCodeType." REVISION "201603210000Z" -- 21 March 2016 DESCRIPTION "Updated Copyright,ORGANIZATION and CONTACT-INFO, Corrected few syntax errors(removed comma, added comma) which was causing issues during loading of the MIB. Added new Domain and Enclosure reason codes; vcDomainMixedTAA, vcEnclosureMixedTAAModules." REVISION "201403050000Z" -- 05 March 2014 DESCRIPTION "Draft-8. Added new reason code to Profile object; vcProfileUEFIBootmodeIncompatibleWithServer." REVISION "201310250000Z" -- 25 October 2013 DESCRIPTION "Draft-7. Added Reason codes to VcDomain object; vcDomainSflowIndirectlyDisabled, vcDomainSflowFailed, vcDomainSflowDegraded, vcDomainPortMonitorIndirectlyDisabled." REVISION "201212120000Z" -- 12 December 2012 DESCRIPTION "Draft-6. The *ManagedStatusChange traps have been deprecated and replaced with *ManagedStatusChanged traps. These new ManagedState traps have a Cause, RootCause, and ReasonCodes to provide administrators with the details of the exact problem and root cause of the condition being reported." REVISION "201206270000Z" -- 27 June 2012 DESCRIPTION "Draft-5. Added vcDomainPrimaryAddressIpv6 to VcDomain object; vcEnclosureAddressIpv6 to VcEnclosure object and vcModuleAddressIpv6 to VcModule object." REVISION "201003080000Z" -- 08 March 2010 DESCRIPTION "Draft-4. Changed the description of vcCheckpointTimeout and vcCheckpointCompleted to be more specific on when these traps are sent." REVISION "200906270000Z" -- 27 June 2009 DESCRIPTION "Draft-3. Changed vcDomainLastCheckpointTime to SnmpAdminString type." REVISION "200902170000Z" -- 17 February 2009 DESCRIPTION "Draft-2. Added enclosure UUID object to Vcenclosuretable. Added traps for server status change and profile status change." REVISION "200901080000Z" -- 08 January 2009 DESCRIPTION "Draft-1. Moved vcModuleRole to VC Module MIB Modified the vcProfileNetworkMap and vcProfileFcFabricMap table to include port number as secondary index." REVISION "200812080000Z" -- 08 December 2008 DESCRIPTION "Draft-0. Initial cut." ::= { virtualConnect 1 } hp OBJECT IDENTIFIER ::= { enterprises 11 } hpSysMgt OBJECT IDENTIFIER ::= { hp 5 } hpEmbeddedServerMgt OBJECT IDENTIFIER ::= { hpSysMgt 7 } hpModuleMgmtProc OBJECT IDENTIFIER ::= { hpEmbeddedServerMgt 5 } virtualConnect OBJECT IDENTIFIER ::= { hpModuleMgmtProc 2 } vcDomainMIBObjects OBJECT IDENTIFIER ::= { vcDomainMIB 1 } -- Top level object groups for VC MIB vcDomain OBJECT IDENTIFIER ::= { vcDomainMIBObjects 1 } vcEnclosure OBJECT IDENTIFIER ::= { vcDomainMIBObjects 2 } vcModule OBJECT IDENTIFIER ::= { vcDomainMIBObjects 3 } vcPort OBJECT IDENTIFIER ::= { vcDomainMIBObjects 4 } vcPhysicalServer OBJECT IDENTIFIER ::= { vcDomainMIBObjects 5 } vcEnetNetwork OBJECT IDENTIFIER ::= { vcDomainMIBObjects 6 } vcFcFabric OBJECT IDENTIFIER ::= { vcDomainMIBObjects 7 } vcProfile OBJECT IDENTIFIER ::= { vcDomainMIBObjects 8 } vcEnetNetworkVcPortMap OBJECT IDENTIFIER ::= { vcDomainMIBObjects 9 } vcFcFabricVcPortMap OBJECT IDENTIFIER ::= { vcDomainMIBObjects 10 } vcProfileNetworkMap OBJECT IDENTIFIER ::= { vcDomainMIBObjects 11 } vcProfileFcFabricMap OBJECT IDENTIFIER ::= { vcDomainMIBObjects 12 } VcManagedStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The managed status of a virtual Connect object. The enumerations are described below: unknown(1) - Indicates the condition of the component could not be determined normal(2) - Indicates the component is fully functional warning(3) - Indicates a component threshold has been reached or error condition is imminent minor(4) - Indicates an error condition exists that has little or no component impact major(5) - Indicates an error condition exists that significantly impairs the component critical(6) - Indicates an error condition exists where the component no longer provides service disabled(7) - Indicates the component is disabled and non-functioning info(8) - Indicates a non-service affecting condition exists such as initializing components and system login/logout " SYNTAX INTEGER { unknown(1), normal(2), warning(3), minor(4), major(5), critical(6), disabled(7), info(8) } VcDomainModuleRole ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The virtual connect manager role of this module. The enumerations are described below: unintegrated - module is not a member of a domain primaryProtected - module is VCM primary, and a VCM standby exists primaryUnprotected - module is VCM primary, and no VCM standby exists standby - module is VCM standby other - module is not able to host VCM For roles other than primaryProtected and primaryUnprotected, the only populated objects are: domainModuleRole, domainPrimaryAddressType, domainPrimary, checkpointState " SYNTAX INTEGER { unintegrated(1), primaryProtected(2), primaryUnprotected(3), standby(4), other(5) } VcModuleType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The virtual connect interconnect module type. The enumerations are described below: vcModuleEnet - VC-Enet module vcModuleFC - VC-FC module vcModuleOther - Unknown module or a module not supported by VC " SYNTAX INTEGER { vcModuleEnet(1), vcModuleFC(2), vcModuleOther(3) } VcPortType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The virtual connect port type. The enumerations are described below: vcEnetPhysicalPort - A physical port on VC-Enet module vcEnetLogicallPort - A logical port on VC-Enet module (e.g., a Flex-10 subport) vcFCPort - A physical port on VC-FC module " SYNTAX INTEGER { vcEnetPhysicalPort(1), vcEnetLogicallPort(2), vcFCPort(3) } -- -- Reason Code Enumerations -- Only one reason is included, the remaining will be added as and when the new -- ones are added as part of the events from the model -- VcDomainReasonCodeType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The ReasonCode for Virtual Connect Domain type. The enumerations are described below along with a sample 'Cause' string: vcDomainOk - All enclosures and profiles are normal in the domain - Sample Cause: All enclosures and profiles are normal in domain MyDom vcDomainAbnormalEnclosuresAndProfiles - One or more enclosures and profiles are abnormal in the domain - Sample Cause: Domain MyDom contains abnormal enclosures and profiles vcDomainSomeEnclosuresAbnormal - At least one enclosure is not OK or Degraded - Sample Cause: 2 of 3 enclosures are abnormal (and not degraded) in the MyDom domain vcDomainUnmappedProfileConnections - The profile contains connections that are not mapped to a server port - Sample Cause: 2 of 6 profiles contain unmapped connections in the MyDom domain vcDomainStackingFailed - All stacking links between one or more modules have failed - Sample Cause: The stacking links are not fully connected from the primary module enc0:iobay1 to enc0:iobay2 or enc0:iobay3 vcDomainStackingNotRedundant - Some stacking links between one or more modules have failed, but connectivity still exists between modules - Sample Cause: Modules not redundantly connected, failure of module enc0:iobay1 or enc0:iobay2 will isolate some modules vcDomainSomeProfilesAbnormal - One or more profiles in the domain are abnormal - Sample Cause: 2 of 8 profiles are abnormal (and not degraded, unknown, unmapped, or recovered) in the MyDom domain vcDomainUnknown - The condition of the domain cannot be determined - Sample Cause: The state of all enclosures and profiles are unknown in the MyDom domain vcDomainOverProvisioned - More than 16 VC modules are in the domain - Sample Cause: More than 16 VC-FC or VC-Enet modules in domain MyDom vcDomainSflowIndirectlyDisabled - sFlow indirectly disabled by VCEM - Sample Cause: sFlow indirectly disabled by VCEM vcDomainSflowFailed - sFlow's network state is failed or all ENET modules have sFlow IP address issues - Sample Cause: sFlow state is failed vcDomainSflowDegraded - sFlow's network state is degraded or ENET module has sFlow IP address issues - Sample Cause: sFlow state is degraded vcDomainPortMonitorIndirectlyDisabled - PortMonitor indirectly disabled by VCEM - Sample Cause: PortMonitor indirectly disabled by VCEM vcDomainMixedTAA - Mix of TAA and Non-TAA compliant of one or more HP VC FlexFabric-20/40 F8 Module or HP VC 16Gb 24-Port FC Module in or across enclosures in VcDomain - Sample Cause: Domain contains a mix of TAA and non-TAA interconnect modules vcDomainInvalidPXEBootOrderProfileConnection - Domain configured with unsupported PXEBootOrder ethernet connection. - Sample Cause: Domain contains profiles with unsupported PXEBootOrder configuration " SYNTAX INTEGER { vcDomainOk(700), vcDomainAbnormalEnclosuresAndProfiles(701), vcDomainSomeEnclosuresAbnormal(702), vcDomainUnmappedProfileConnections(703), vcDomainStackingFailed(706), vcDomainStackingNotRedundant(707), vcDomainSomeProfilesAbnormal(709), vcDomainUnknown(712), vcDomainOverProvisioned(713), vcDomainMixedTAA(714), vcDomainInvalidPXEBootOrderProfileConnection(715), vcDomainSflowIndirectlyDisabled(801), vcDomainSflowFailed(802), vcDomainSflowDegraded(803), vcDomainPortMonitorIndirectlyDisabled(901) } VcEnclosureReasonCodeType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The ReasonCode for Virtual Connect Enclosure type. The enumerations are described below: vcEnclosureOk - The enclosure is normal - Sample Cause: Enclosure enc0 is normal vcEnclosureAllEnetModulesFailed - All Ethernet modules are abnormal, none are OK or degraded - Sample Cause: All Ethernet modules are abnormal in enclosure enc0 vcEnclosureSomeEnetModulesAbnormal - One or more Ethernet modules are abnormal - Sample Cause: 2 of 6 Ethernet modules are abnormal in enclosure enc0 vcEnclosureSomeModulesOrServersIncompatible - The enclosure contains incompatible modules or configured modules are missing - Sample Cause: Enclosure enc0 contains incompatible/missing servers or modules vcEnclosureSomeFcModulesAbnormal - One or more FC modules are abnormal - Sample Cause: 2 of 4 FC modules are abnormal in enclosure enc0 vcEnclosureSomeServersAbnormal - At least one server is in a known state and no servers are OK, or at least on server is degraded - Sample Cause: All servers are abnormal in enclosure enc0 - Sample Cause: Enclosure enc0 contains degraded servers vcEnclosureUnknown - The condition of the enclosure cannot be determined, or the state of servers or modules is unknown - Sample Cause: The state of all modules and servers in enclosure enc0 are unknown - Sample Cause: Enclosure enc0 unable to communicate with OA - Sample Cause: Enclosure enc0 initializing - Sample Cause: Enclosure enc0 contains unknown servers or modules vcEnclosureMixedTAAModules - The enclosure contains the mix of TAA compliant and non-TAA compliant interconnect modules - Sample Cause: Mix of TAA compliant and non-TAA compliant of one or more HP VC FlexFabric-20/40 F8 Module or HP VC 16Gb 24-Port FC Module " SYNTAX INTEGER { vcEnclosureOk(600), vcEnclosureAllEnetModulesFailed(601), vcEnclosureSomeEnetModulesAbnormal(602), vcEnclosureSomeModulesOrServersIncompatible(603), vcEnclosureSomeFcModulesAbnormal(604), vcEnclosureSomeServersAbnormal(605), vcEnclosureUnknown(606), vcEnclosureMixedTAAModules(607) } VcModuleReasonCodeType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The ReasonCode for Virtual Connect Module type. The enumerations are described below: vcEnetmoduleOk - The Ethernet module is functioning normally - Sample Cause: Module enc0:iobay1 is normal vcEnetmoduleEnclosureDown - The module is unable to communicate with the enclosure/OA - Sample Cause: Module enc0:iobay1 unable to communicate with enclosure enc1 vcEnetmoduleModuleMissing - A configured module has been removed - Sample Cause: Module in bay enc0:iobay3 has been removed vcEnetmodulePortprotect - A condition has been detected on the port causing port protection to be activated - Sample Cause: Ports are disabled due to a detected port protection condition on module enc0:iobay4 vcEnetmoduleIncompatible - The module is incompatible, such as replacing a configured Enet module with an FC module - Sample Cause: Module in bay enc0:iobay4 does not match configuration (incompatible) vcEnetmoduleHwDegraded - The module is being reported as degraded by the OA - Sample Cause: Hardware status of enc0:iobay2 is reported as degraded by OA vcEnetmoduleUnknown - The condition of the module is unknown - Sample Cause: Unable to communicate with enc0:iobay2 - Sample Cause: The current state of enc0:iobay2 is unknown - Sample Cause: Module enc1:iobay2 unable to communicate with enclosure enc0 vcFcmoduleOk - The FC module is functioning normally - Sample Cause: Module enc0:iobay3 is normal vcFcmoduleEnclosureDown - The FC module is unable to communicate with the enclosure/OA - Sample Cause: Module enc0:iobay3 unable to communicate with enclosure enc0 vcFcmoduleModuleMissing - A configured module has been removed - Sample Cause: Module in bay enc0:iobay4 has been removed vcFcmoduleHwDegraded - The module is reporting a degraded hardware condition - Sample Cause: Module in bay enc0:iobay4 is reporting a degraded hardware condition vcFcmoduleIncompatible - The module is incompatible, such as replacing a configured FC module with an Enet module - Sample Cause: Module in bay enc0:iobay3 does not match configuration (incompatible) vcFcmoduleUnknown - The condition of the module is unknown - Sample Cause: The current state of enc0:iobay3 is unknown - Sample Cause: Module enc0:iobay3 unable to communicate with enclosure enc0 " SYNTAX INTEGER { vcEnetmoduleOk(400), vcEnetmoduleEnclosureDown(401), vcEnetmoduleModuleMissing(402), vcEnetmodulePortprotect(404), vcEnetmoduleIncompatible(405), vcEnetmoduleHwDegraded(406), vcEnetmoduleUnknown(407), vcFcmoduleOk(408), vcFcmoduleEnclosureDown(409), vcFcmoduleModuleMissing(410), vcFcmoduleHwDegraded(412), vcFcmoduleIncompatible(413), vcFcmoduleUnknown(414) } VcPortReasonCodeType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The ReasonCode for Virtual Connect Enet Port type. The enumerations are described below: vcEnetPortOK - - Sample Cause: " SYNTAX INTEGER { vcEnetPortOK(1) } VcPhysicalServerReasonCodeType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The ReasonCode for Virtual Connect PhysicalServer type. The enumerations are described below: vcPhysicalServerOk - The server is functioning normally - Sample Cause: Server enc0:dev1 is normal - Sample Cause: Server enc0:dev1 profile pending vcPhysicalServerEnclosureDown - The server is unable to communicate with the enclosure/OA - Sample Cause: Server enc0:dev1 unable to communicate with enclosure enc0 vcPhysicalServerFailed - The server is in a failed condition - Sample Cause: Server enc0:dev1 has failed vcPhysicalServerDegraded - The server is in a degraded condition - Sample Cause: Multi-blade server enc0:dev1 is missing or not initialized vcPhysicalServerUnknown - The condition of the server is unknown - Sample Cause: The current state of enc0:dev1 is unknown " SYNTAX INTEGER { vcPhysicalServerOk(500), vcPhysicalServerEnclosureDown(501), vcPhysicalServerFailed(502), vcPhysicalServerDegraded(503), vcPhysicalServerUnknown(504) } VcFcFabricReasonCodeType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The ReasonCode for Virtual Connect Fabric type. The enumerations are described below: vcFabricOk - The fabric is functioning normally - Sample Cause: Fabric MyFabric is normal vcFabricNoPortsConfigured - The fabric does not have any uplink port configured - Sample Cause: No uplink ports assigned to fabric MyFabric vcFabricSomePortsAbnormal - Some uplink ports for the fabric are in an abnormal condition - Sample Cause: 1 of 3 uplink ports are abnormal on MyFabric fabric vcFabricAllPortsAbnormal - All uplink ports for the fabric are in an abnormal condition - Sample Cause: Condition of fabric MyFabric is abnormal vcFabricWwnMismatch - A WWN mismatch condition has been detected - Sample Cause: Fabric MyFabric WWN 50:06:0B:00:00:C2:62:00 does not match WWN 50:06:0B:00:00:C2:64:FF vcFabricUnknown - The condition of the fabric is unknown - Sample Cause: Condition of fabric MyFabric is unknown " SYNTAX INTEGER { vcFabricOk(200), vcFabricNoPortsConfigured(202), vcFabricSomePortsAbnormal(203), vcFabricAllPortsAbnormal(204), vcFabricWwnMismatch(205), vcFabricUnknown(206) } VcEnetNetworkReasonCodeType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The ReasonCode for Virtual Connect Enet Network type. The enumerations are described below: vcNetworkOk - The network is functioning normally - Sample Cause: Network MyNetwork is normal vcNetworkUnknown - The condition of the network is unknown - Sample Cause: Condition of network MyNetwork is unknown vcNetworkDisabled - The network is disabled - Sample Cause: Network MyNetwork not enabled vcNetworkAbnormal - The condition of the network is abnormal - Sample Cause: Network MyNetwork is abnormal vcNetworkFailed - The network is in a failed condition - Sample Cause: Network MyNetwork has failed vcNetworkDegraded - The network is in a degraded condition - Sample Cause: Network MyNetwork is degraded vcNetworkNoPortsAssignedToPrivateNetwork - No ports have been assigned to the private network - Sample Cause: No ports assigned to private network MyNetwork " SYNTAX INTEGER { vcNetworkOk(100), vcNetworkUnknown(101), vcNetworkDisabled(102), vcNetworkAbnormal(104), vcNetworkFailed(105), vcNetworkDegraded(106), vcNetworkNoPortsAssignedToPrivateNetwork(109) } VcProfileReasonCodeType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The ReasonCode for Virtual Connect Enet Network type. The enumerations are described below: vcProfileOk - The profile is normal - Sample Cause: All MyProfile profile connections are normal - Sample Cause: No connections in MyProfile profile for server in bay enc0:devbay1 vcProfileServerAbnormal - The server the profile is assigned to is abnormal - Sample Cause: The MyProfile profile is assigned to an abnormal server in bay enc0:devbay1 vcProfileAllConnectionsFailed - All connections in the profile have failed - Sample Cause: All MyProfile profile connections for server in bay enc0:devbay1 have failed vcProfileSomeConnectionsUnmapped - One or more connections in the profile are not mapped to a physical port - Sample Cause: 2 MyProfile profile connections for server in bay enc0:devbay3 are not mapped vcProfileAllConnectionsAbnormal - All connections in profile are abnormal - Sample Cause: All MyProfile profile connections for server in bay enc0:devbay1 are abnormal vcProfileSomeConnectionsAbnormal - Some connections in the profile are abnormal - Sample Cause: 3 MyProfile profile connections for server in bay enc0:devbay1 are abnormal vcProfileUEFIBootmodeIncompatibleWithServer - UEFI bootmode is assigned to non-UEFI capable server - Sample Cause: Boot Mode UEFI configured for Profile MyProfile is not supported by server in bay enc0:devbay2 vcProfileConnectionInvalidPXEBootOrder - One of the ethernet connection in the profile has invalid PXEBootOrder - Sample Cause: PXEBootOrder configured in MyProfile is not supported for server in bay enc0:devbay2 vcProfileConnectionDuplicateIscsiInitiatorIP - Profile has iSCSI Connection configured with duplicate initiator IP - Sample Cause: Duplicate iSCSI Initiator IP not allowed vcProfileConnectionDuplicateIscsiInitiatorName - Profile has iSCSI Connection configured with duplicate initiator Name - Sample Cause: Duplicate iSCSI Initiator Name not allowed vcProfileConnectionDuplicateIscsiInitiatorNameIP - Profile has iSCSI Connection configured with duplicate initiator IP and initiator Name - Sample Cause: Duplicate iSCSI Initiator Name and Initiator IP not allowed " SYNTAX INTEGER { vcProfileOk(300), vcProfileServerAbnormal(301), vcProfileAllConnectionsFailed(304), vcProfileSomeConnectionsUnmapped(309), vcProfileAllConnectionsAbnormal(310), vcProfileSomeConnectionsAbnormal(311), vcProfileUEFIBootmodeIncompatibleWithServer(312), vcProfileUnknown(313), vcProfileConnectionInvalidPXEBootOrder(314), vcProfileConnectionDuplicateIscsiInitiatorIP(315), vcProfileConnectionDuplicateIscsiInitiatorName(316), vcProfileConnectionDuplicateIscsiInitiatorNameIP(317) } -- Domain level objects vcDomainName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The Virtual Connect Domain name." ::= { vcDomain 1 } vcDomainManagedStatus OBJECT-TYPE SYNTAX VcManagedStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The overall domain status of the Virtual Connect Domain. The possible values are : unknown(1) - Indicates the condition of the Domain could not be determined. normal(2) - Indicates all enclosures and profiles are normal in the domain. warning(3) - Indicates stacking links are not redundant or sFlow/port Monitoring disabled. minor(4) - Indicates enclosures and profiles are degraded. major(5) - Indicates one or more profiles are abnormal or stacking links between one or more modules have failed. critical(6) - Indicates one or more enclosures and profiles are abnormal and degraded in the domain. info(8) - Indicates information about the domain configuration like invalid boot order configuration, unmapped profile connections or Mix of TAA and Non-TAA modules in or across enclosures in VcDomain. Refer vcDomainCause, vcDomainRootCause and vcDomainReasonCode for additional details. " ::= { vcDomain 2 } vcDomainPrimaryAddressType OBJECT-TYPE SYNTAX TransportAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The transport address type used to address the primary VC module. Value 0 (UNKNOWN) indicates vcDomainPrimaryAddress is empty and value 1 (UDPIPV4) indicates vcDomainPrimaryAddress contains IPv4 address." ::= { vcDomain 3 } vcDomainPrimaryAddress OBJECT-TYPE SYNTAX TransportAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The address of the primary VC module. The address format is determined by the vcDomainPrimaryAddressType object." ::= { vcDomain 4 } vcDomainCheckpointValid OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object returns 'true' when the VC configuration has been successfully checkpointed." ::= { vcDomain 5 } vcDomainLastCheckpointTime OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The timestamp of the last attempt to update the configuration state of the domain." ::= { vcDomain 6 } vcDomainStackingLinkRedundant OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The overall stacking link connection redundancy status. This value indicates whether all VC-Enet modules will remain connected to each other with the loss of a link." ::= { vcDomain 7 } vcDomainRootCause OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The cause indicates the root cause in the domain that resulted in the current Managed Status of the element Example: More than 16 VC-FC or VC-Enet modules in domain Example: Modules not redundantly connected, failure of module enc0:iobay1 or enc0:iobay2 or enc1:iobay2 will isolate some modules; Port enc0:iobay5:d3:v1 loop detected and automatically disabled" ::= { vcDomain 8 } vcDomainCause OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The cause specified indicates the change in the element that resulted in the current Managed Status of the element. Example: 2 of 7 profiles contain unmapped connections in the domain" ::= { vcDomain 9 } vcDomainReasonCode OBJECT-TYPE SYNTAX VcDomainReasonCodeType MAX-ACCESS read-only STATUS current DESCRIPTION "This indicates an object specific reason-code for the change in Managed Status of the element." ::= { vcDomain 10 } vcDomainPrimaryAddressIpv6 OBJECT-TYPE SYNTAX TransportAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IPv6 address of the primary VC module." ::= { vcDomain 11 } -- -- Enclosure Table -- vcEnclosureTable OBJECT-TYPE SYNTAX SEQUENCE OF VcEnclosureEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of enclosures in the Virtual Connect Domain." ::= { vcEnclosure 1 } vcEnclosureEntry OBJECT-TYPE SYNTAX VcEnclosureEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing information about a particular enclosure." INDEX { vcEnclosureIndex } ::= { vcEnclosureTable 1 } VcEnclosureEntry ::= SEQUENCE { vcEnclosureIndex INTEGER, vcEnclosureName OCTET STRING, vcEnclosureManagedStatus VcManagedStatus, vcEnclosureAddressType TransportAddressType, vcEnclosureAddress TransportAddress, vcEnclosureUUID SnmpAdminString, vcEnclosureRootCause SnmpAdminString, vcEnclosureCause SnmpAdminString, vcEnclosureReasonCode VcEnclosureReasonCodeType, vcEnclosureAddressIpv6 TransportAddress } vcEnclosureIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Index value for the enclosure table." ::= { vcEnclosureEntry 1 } vcEnclosureName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "Administratively assigned name for the enclosure." ::= { vcEnclosureEntry 2 } vcEnclosureManagedStatus OBJECT-TYPE SYNTAX VcManagedStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Managed status of the enclosure. The possible values are : unknown(1) - Indicates the condition of the enclosure cannot be determined. normal(2) - Indicates the enclosure with all modules and servers are normal. minor(4) - Indicates either at least one server is in degraded state or One or more VC modules are abnormal in the enclosure. major(5) - Indicates either enclosure contains incompatible/missing servers/VC modules, or enclosure is unable to communicate with OA. critical(6) - Indicates either all servers or modules are abnormal in the enclosure. info(8) - Indicates the information about the enclosure. Detailed error status and its root cause can be learnt from vcEnclosureRootCause and vcEnclosureCause object types. " ::= { vcEnclosureEntry 3 } vcEnclosureAddressType OBJECT-TYPE SYNTAX TransportAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The transport address type used to address the enclosure's management entity. Value 0 (UNKNOWN) indicates vcEnclosureAddress is empty and value 1 (UDPIPV4) indicates vcEnclosureAddress contains IPv4 address." ::= { vcEnclosureEntry 4 } vcEnclosureAddress OBJECT-TYPE SYNTAX TransportAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The address of the enclosure's management entity. The address format is determined by the vcEnclosureAddressType object." ::= { vcEnclosureEntry 5 } vcEnclosureUUID OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "UUID value for the enclosure." ::= { vcEnclosureEntry 6 } vcEnclosureRootCause OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The cause indicates the root cause in the domain that resulted in the current Managed Status of the element Example: Module in bay enc0:iobay3 has been removed" ::= { vcEnclosureEntry 7 } vcEnclosureCause OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The cause specified indicates the change in the element that resulted in the current Managed Status of the element. Example: 2 of 6 Ethernet modules are abnormal in enclosure enc0" ::= { vcEnclosureEntry 8 } vcEnclosureReasonCode OBJECT-TYPE SYNTAX VcEnclosureReasonCodeType MAX-ACCESS read-only STATUS current DESCRIPTION "This indicates an object specific reason-code for the change in Managed Status of the element." ::= { vcEnclosureEntry 9 } vcEnclosureAddressIpv6 OBJECT-TYPE SYNTAX TransportAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IPv6 address of the enclosure's management entity." ::= { vcEnclosureEntry 10 } -- -- vcModule Table -- vcModuleTable OBJECT-TYPE SYNTAX SEQUENCE OF VcModuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of VC interconnect modules in the Virtual Connect Domain." ::= { vcModule 1 } vcModuleEntry OBJECT-TYPE SYNTAX VcModuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing information about a single interconnect module." INDEX { vcModuleIndex } ::= { vcModuleTable 1 } VcModuleEntry ::= SEQUENCE { vcModuleIndex INTEGER, vcModuleType VcModuleType, vcModuleManagedStatus VcManagedStatus, vcModulePartNumber SnmpAdminString, vcModuleSerialNumber SnmpAdminString, vcModuleProductName SnmpAdminString, vcModuleFwRev SnmpAdminString, vcModuleEnclosurePointer RowPointer, vcModuleLocation Unsigned32, vcModuleAddressType TransportAddressType, vcModuleAddress TransportAddress, vcModuleID SnmpAdminString, vcModuleRootCause SnmpAdminString, vcModuleCause SnmpAdminString, vcModuleReasonCode VcModuleReasonCodeType, vcModuleAddressIpv6 TransportAddress } vcModuleIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Index value for the vcModuleTable." ::= { vcModuleEntry 1 } vcModuleType OBJECT-TYPE SYNTAX VcModuleType MAX-ACCESS read-only STATUS current DESCRIPTION "The VC interconnect module type." ::= { vcModuleEntry 2 } vcModuleManagedStatus OBJECT-TYPE SYNTAX VcManagedStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The overall managed status of the vcEnetModule. The possible values are : unknown(1) - Indicates VC module is unable to communicate with the enclosure/OA or condition of the VC module is unknown. normal(2) - Indicates VC Module functioning normally. minor(4) - Indicates VC module is being reported as degraded by the OA or VC module ports are disabled. major(5) - Indicates the module is incompatible due to replacing a configured Enet module with an FC module or vice versa. critical(6) - Indicates a configured VC module either removed or missing. Detailed error status and its root cause can be learnt from vcModuleRootCause and vcModuleCause object types. " ::= { vcModuleEntry 3 } vcModulePartNumber OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The part number of the VC module." ::= { vcModuleEntry 4 } vcModuleSerialNumber OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The serial number of the VC module." ::= { vcModuleEntry 5 } vcModuleProductName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The product name of the VC module." ::= { vcModuleEntry 6 } vcModuleFwRev OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The revision number of the firmware running on this Enet module." ::= { vcModuleEntry 7 } vcModuleEnclosurePointer OBJECT-TYPE SYNTAX RowPointer MAX-ACCESS read-only STATUS current DESCRIPTION "A reference pointer into vcEnclosureTable that contains enclosure information for the enclosure associated with this vcModule." ::= { vcModuleEntry 8 } vcModuleLocation OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The interconnect bay number associated with this VC module." ::= { vcModuleEntry 9 } vcModuleAddressType OBJECT-TYPE SYNTAX TransportAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The transport address type used to address the EnetModule's management entity. Value 0 (UNKNOWN) indicates vcModuleAddress is empty and value 1 (UDPIPV4) indicates vcModuleAddress contains IPv4 address." ::= { vcModuleEntry 10 } vcModuleAddress OBJECT-TYPE SYNTAX TransportAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The address of the SNMP agent on the VC module. The address format is determined by the vcModuleAddressType object." ::= { vcModuleEntry 11 } vcModuleID OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "Unique identifier for the VC module. This object contains reports the following values, - MAC address for Enet module. - WWN address for FC modules." ::= { vcModuleEntry 12 } vcModuleRootCause OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The cause indicates the root cause in the domain that resulted in the current Managed Status of the element Example: Port enc0:iobay5:d3:v1 loop detected and automatically disabled" ::= { vcModuleEntry 13 } vcModuleCause OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The cause specified indicates the change in the element that resulted in the current Managed Status of the element. Example: Port enc0:iobay5:d3:v1 loop detected and automatically disabled" ::= { vcModuleEntry 14 } vcModuleReasonCode OBJECT-TYPE SYNTAX VcModuleReasonCodeType MAX-ACCESS read-only STATUS current DESCRIPTION "This indicates an object specific reason-code for the change in Managed Status of the element." ::= { vcModuleEntry 15 } vcModuleAddressIpv6 OBJECT-TYPE SYNTAX TransportAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IPv6 address of the SNMP agent on the VC module." ::= { vcModuleEntry 16 } -- -- vcPort Table -- vcPortTable OBJECT-TYPE SYNTAX SEQUENCE OF VcPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of ports in the Virtual Connect Domain. Ports include physical network ports (uplinks, server links, stacking links, and unconnected), logical network ports (Flex-10 subports on downlinks), and Fibre Channel ports (uplinks and downlinks)." ::= { vcPort 1 } vcPortEntry OBJECT-TYPE SYNTAX VcPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing information about a particular ethernet port." INDEX { vcPortIndex } ::= { vcPortTable 1 } VcPortEntry ::= SEQUENCE { vcPortIndex INTEGER, vcPortType VcPortType, vcPortManagedStatus VcManagedStatus, vcPortManagerAddressType TransportAddressType, vcPortManagerAddress TransportAddress, vcPortContainerPointer RowPointer, vcPortPhysicalPortPointer RowPointer } vcPortIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Index value for the vcPort table." ::= { vcPortEntry 1 } vcPortType OBJECT-TYPE SYNTAX VcPortType MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the VC port type." ::= { vcPortEntry 2 } vcPortManagedStatus OBJECT-TYPE SYNTAX VcManagedStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Managed status of the vcPort. The possible values are : unknown(1) - Indicates port status is unknown due to module condition is unknown or abnormal. normal(2) - Indicates port is linked and functioning normally. warning(3) - Indicates port is either unlinked or unpopulated. major(5) - Indicates port is either incompatible or eKey Fault detected or port connected to incompatible storage or an invalid port connection. critical(6) - Indicates port loop/pause-flood detected or port pair mismatch of EnetSpeed/SFP Type detected and caused automatically disabled the port. disabled(7) - Indicates port is disabled/covered or Administratively Hidden/port unlinked with port mode set to disabled. " ::= { vcPortEntry 3 } vcPortManagerAddressType OBJECT-TYPE SYNTAX TransportAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The transport address type used to address the EnetModule's management entity." ::= { vcPortEntry 4 } vcPortManagerAddress OBJECT-TYPE SYNTAX TransportAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The address of the SNMP agent on the VC module. The address format is determined by the vcPortManagerAddressType object." ::= { vcPortEntry 5 } vcPortPhysicalPortPointer OBJECT-TYPE SYNTAX RowPointer MAX-ACCESS read-only STATUS current DESCRIPTION "reference to the table entry for the physical port in the containing module's MIB. The referenced table depends on the port type: vcEnetPhysicalPort: ifTable vcEnetLogicalPort : ifTable of corresponding physical port vcFCPort : connUnitPortTable " ::= { vcPortEntry 6 } vcPortContainerPointer OBJECT-TYPE SYNTAX RowPointer MAX-ACCESS read-only STATUS current DESCRIPTION "reference to the table entry in the VC Domain MIB for the component which contains this port: vcEnetPhysicalPort: vcModuleTable vcEnetLogicalPort : vcPortTable (for the physical port containing this Flex-10 subport) vcFCPort: vcModuleTable " ::= { vcPortEntry 7 } -- -- vcPhysicalServer Table (server bay devices) -- vcPhysicalServerTable OBJECT-TYPE SYNTAX SEQUENCE OF VcPhysicalServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of server bay devices in the Virtual Connect Domain." ::= { vcPhysicalServer 1 } vcPhysicalServerEntry OBJECT-TYPE SYNTAX VcPhysicalServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "VC PhysicalServer bay (server bay) table entry." INDEX { vcPhysicalServerIndex } ::= { vcPhysicalServerTable 1 } VcPhysicalServerEntry ::= SEQUENCE { vcPhysicalServerIndex INTEGER, vcPhysicalServerEnclosureIndex INTEGER, vcPhysicalServerManagedStatus VcManagedStatus, vcPhysicalServerPartNumber SnmpAdminString, vcPhysicalServerSerialNumber SnmpAdminString, vcPhysicalServerProductName SnmpAdminString, vcPhysicalServerLocation Unsigned32, vcPhysicalServerRootCause SnmpAdminString, vcPhysicalServerCause SnmpAdminString, vcPhysicalServerReasonCode VcPhysicalServerReasonCodeType } vcPhysicalServerIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Index value for the vcPhysicalServer table." ::= { vcPhysicalServerEntry 1 } vcPhysicalServerEnclosureIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Index value for the enclosure in vcEnclosureTable containing this server." ::= { vcPhysicalServerEntry 2 } vcPhysicalServerManagedStatus OBJECT-TYPE SYNTAX VcManagedStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Managed status of the vcPhysicalServer. The possible values are : unknown(1) - Indicates the server is unable to communicate with the enclosure/OA or condition of the server is unknown. normal(2) - Indicates the server is functioning normally. minor(4) - Indicates the server is in a degraded condition. major(5) - Indicates multi-blade server is missing or not initialized. critical(6) - Indicates the server is in failed condition. Detailed error status and its root cause can be learnt from vcPhysicalServerRootCause and vcPhysicalServerCause object types. " ::= { vcPhysicalServerEntry 3 } vcPhysicalServerPartNumber OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The part number of the Physical Server." ::= { vcPhysicalServerEntry 4 } vcPhysicalServerSerialNumber OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The serial number of the Physical Server." ::= { vcPhysicalServerEntry 5 } vcPhysicalServerProductName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The product name of the Physical Server." ::= { vcPhysicalServerEntry 6 } vcPhysicalServerLocation OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The device bay number of the bay in which this server is installed." ::= { vcPhysicalServerEntry 7 } vcPhysicalServerRootCause OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The cause indicates the root cause in the domain that resulted in the current Managed Status of the element Example: Server enc0:dev1 unable to communicate with enclosure enc0" ::= { vcPhysicalServerEntry 8 } vcPhysicalServerCause OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The cause specified indicates the change in the element that resulted in the current Managed Status of the element. Example: Server enc0:dev2 profile pending" ::= { vcPhysicalServerEntry 9 } vcPhysicalServerReasonCode OBJECT-TYPE SYNTAX VcPhysicalServerReasonCodeType MAX-ACCESS read-only STATUS current DESCRIPTION "This indicates an object specific reason-code for the change in Managed Status of the element." ::= { vcPhysicalServerEntry 10 } -- -- FcFabric Table -- vcFcFabricTable OBJECT-TYPE SYNTAX SEQUENCE OF VcFcFabricEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of FC fabrics in the Virtual Connect Domain." ::= { vcFcFabric 1 } vcFcFabricEntry OBJECT-TYPE SYNTAX VcFcFabricEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a single fabric." INDEX { vcFcFabricIndex } ::= { vcFcFabricTable 1 } VcFcFabricEntry ::= SEQUENCE { vcFcFabricIndex INTEGER, vcFcFabricName SnmpAdminString, vcFcFabricManagedStatus VcManagedStatus, vcFcFabricRootCause SnmpAdminString, vcFcFabricCause SnmpAdminString, vcFcFabricReasonCode VcFcFabricReasonCodeType } vcFcFabricIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Index value for the vcFcFabric table." ::= { vcFcFabricEntry 1 } vcFcFabricName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "Administratively assigned name for the fabric." ::= { vcFcFabricEntry 2 } vcFcFabricManagedStatus OBJECT-TYPE SYNTAX VcManagedStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The overall managed status of the vcFcFabric. The possible values are : unknown(1) - Indicates the condition of the fabric is unknown. normal(2) - Indicates the Fabric is functioning normally. minor(4) - Indicates Some uplink ports for the fabric are in an abnormal condition or WWN mismatch condition has been detected. critical(6) - Indicates the fabric does not have any uplink port configured or condition of the fabric is abnormal. Detailed error status and its root cause can be learnt from vcFcFabricRootCause and vcFcFabricCause object types. " ::= { vcFcFabricEntry 3 } vcFcFabricRootCause OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The cause indicates the root cause in the domain that resulted in the current Managed Status of the element Example: No uplink ports assigned to fabric MySAN" ::= { vcFcFabricEntry 4 } vcFcFabricCause OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The cause specified indicates the change in the element that resulted in the current Managed Status of the element. Example: 2 of 3 uplink ports are abnormal on BackupSAN fabric" ::= { vcFcFabricEntry 5 } vcFcFabricReasonCode OBJECT-TYPE SYNTAX VcFcFabricReasonCodeType MAX-ACCESS read-only STATUS current DESCRIPTION "This indicates an object specific reason-code for the change in Managed Status of the element." ::= { vcFcFabricEntry 6 } -- -- VcEnetNetwork Table -- vcEnetNetworkTable OBJECT-TYPE SYNTAX SEQUENCE OF VcEnetNetworkEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of ethernet networks in the Virtual Connect Domain." ::= { vcEnetNetwork 1 } vcEnetNetworkEntry OBJECT-TYPE SYNTAX VcEnetNetworkEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing information about a single network." INDEX { vcEnetNetworkIndex } ::= { vcEnetNetworkTable 1 } VcEnetNetworkEntry ::= SEQUENCE { vcEnetNetworkIndex INTEGER, vcEnetNetworkName SnmpAdminString, vcEnetNetworkManagedStatus VcManagedStatus, vcEnetNetworkUplinkVlanId Unsigned32, vcEnetNetworkRootCause SnmpAdminString, vcEnetNetworkCause SnmpAdminString, vcEnetNetworkReasonCode VcEnetNetworkReasonCodeType } vcEnetNetworkIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Index value for the vcEnetNetwork table." ::= { vcEnetNetworkEntry 1 } vcEnetNetworkName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "Administratively assigned name for the network." ::= { vcEnetNetworkEntry 2 } vcEnetNetworkManagedStatus OBJECT-TYPE SYNTAX VcManagedStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The overall managed status of the vcEnetNetwork. The possible values are : unknown(1) - Indicates the condition of the network is unknown. normal(2) - Indicates network is functioning normally. minor(4) - Indicates the network is in degraded condition or no ports assigned to the private network. critical(6) - Indicates the network is abnormal or failed condition, or no ports assigned to private FCoE network disabled(7) - Indicates the network is disabled. Detailed error status and its root cause can be learnt from vcEnetNetworkRootCause and vcEnetNetworkCause object types. " ::= { vcEnetNetworkEntry 3 } vcEnetNetworkUplinkVlanId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The VLAN ID for the external uplink network. This value is set to 0 if no uplink VLAN ID is assigned." ::= { vcEnetNetworkEntry 4 } vcEnetNetworkRootCause OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The cause indicates the root cause in the domain that resulted in the current Managed Status of the element Example: Port enc0:iobay5:X3 is unlinked; Port enc0:iobay5:X4 is incompatible" ::= { vcEnetNetworkEntry 5 } vcEnetNetworkCause OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The cause specified indicates the change in the element that resulted in the current Managed Status of the element. Example: Network BLUE has failed" ::= { vcEnetNetworkEntry 6 } vcEnetNetworkReasonCode OBJECT-TYPE SYNTAX VcEnetNetworkReasonCodeType MAX-ACCESS read-only STATUS current DESCRIPTION "This indicates an object specific reason-code for the change in Managed Status of the element." ::= { vcEnetNetworkEntry 7 } -- -- Server Profile Table -- vcProfileTable OBJECT-TYPE SYNTAX SEQUENCE OF VcProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of Server profiles in the Virtual Connect Domain." ::= { vcProfile 1 } vcProfileEntry OBJECT-TYPE SYNTAX VcProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a single server profile." INDEX { vcProfileIndex } ::= { vcProfileTable 1 } VcProfileEntry ::= SEQUENCE { vcProfileIndex INTEGER, vcProfileName SnmpAdminString, vcProfileManagedStatus VcManagedStatus, vcProfilePhysicalServerIndex Unsigned32, vcProfileLogicalSerialNumber SnmpAdminString, vcProfileRootCause SnmpAdminString, vcProfileCause SnmpAdminString, vcProfileReasonCode VcProfileReasonCodeType } vcProfileIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Index value for the vcProfile table." ::= { vcProfileEntry 1 } vcProfileName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "A globally-unique, administratively assigned name for the vcProfilek." ::= { vcProfileEntry 2 } vcProfileManagedStatus OBJECT-TYPE SYNTAX VcManagedStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Managed status of the vcProfile. The possible values are : unknown(1) - Indicates profile is assigned to server which is unable to communicate with the enclosure/OA normal(2) - Indicates all profile connections are normal or no connection in the profile. warning(3) - Indicates profile is pending assignment or failed to set server boot configuration. minor(4) - Indicates one or more profile connections are abnormal or profile configured with invalid configuration like UEFI boot mode is assigned to non-UEFI capable server or duplicate iSCSI initiator Name/IP/Both configured. major(5) - Indicates the profile is assigned to multi-blade server which is missing or not initialized. critical(6) - Indicates all the profile connections failed or profile is assigned to server which is in failed condition. warning(7) - Indicates profile is pending assignment or failed to set server boot configuration. info(8) - Indicates one or more profile connections are not mapped to a physical port or Enet connection in the profile has invalid PXEBootOrder setting. Detailed error status and its root cause can be learnt from vcProfileRootCause and vcProfileCause object types. " ::= { vcProfileEntry 3 } vcProfilePhysicalServerIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Index value of assigned physical server from vcPhysicalServer table. The value is set to 0 if the profile is unassigned." ::= { vcProfileEntry 4 } vcProfileLogicalSerialNumber OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "A logical server serial number to this profile. If the value is empty, the server will use hardware serial number." ::= { vcProfileEntry 5 } vcProfileRootCause OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The cause indicates the root cause in the domain that resulted in the current Managed Status of the element Example: The BackupServer profile is assigned to an abnormal server in bay enc0:devbay1" ::= { vcProfileEntry 6 } vcProfileCause OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The cause specified indicates the change in the element that resulted in the current Managed Status of the element. Example: 3 MapServer profile connections for server in bay enc0:devbay3 are not mapped" ::= { vcProfileEntry 7 } vcProfileReasonCode OBJECT-TYPE SYNTAX VcProfileReasonCodeType MAX-ACCESS read-only STATUS current DESCRIPTION "This indicates an object specific reason-code for the change in Managed Status of the element." ::= { vcProfileEntry 8 } -- -- vcEnetNetworkVcPortMap Table -- vcEnetNetworkVcPortMapTable OBJECT-TYPE SYNTAX SEQUENCE OF VcEnetNetworkVcPortMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists a mapping of networks and associated ports The objective of this table is to provide a mechanism to access all EnetPorts associated with a given EnetNetwork. The second index to the table vcPortIndex can be used access port information for a given port" ::= { vcEnetNetworkVcPortMap 1 } vcEnetNetworkVcPortMapEntry OBJECT-TYPE SYNTAX VcEnetNetworkVcPortMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a VcPort in Enet Network." INDEX { vcEnetNetworkVcPortMapNetworkIndex, vcEnetNetworkVcPortMapVcPortIndex } ::= { vcEnetNetworkVcPortMapTable 1 } VcEnetNetworkVcPortMapEntry ::= SEQUENCE { vcEnetNetworkVcPortMapNetworkIndex INTEGER, vcEnetNetworkVcPortMapVcPortIndex INTEGER } vcEnetNetworkVcPortMapNetworkIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Index value for network entry. This index value must correspond to vcEnetNetworkIndex from vcEnetNetworkTable." ::= { vcEnetNetworkVcPortMapEntry 1 } vcEnetNetworkVcPortMapVcPortIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Index value for VcPort entry. This index value must correspond to vcPortIndex from vcPortTable." ::= { vcEnetNetworkVcPortMapEntry 2 } -- -- vcFcFabricVcPortMap Table -- vcFcFabricVcPortMapTable OBJECT-TYPE SYNTAX SEQUENCE OF VcFcFabricVcPortMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists a mapping of fabics and associated VcPorts. The objective of this table is to provide a mechanism to access all VcPorts associated with a given FcFabric. The second index to the table vcVcPortIndex can be used access VcPort information for a given VcPort" ::= { vcFcFabricVcPortMap 1 } vcFcFabricVcPortMapEntry OBJECT-TYPE SYNTAX VcFcFabricVcPortMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a single fabric." INDEX { vcFcFabricVcPortMapFcFabricIndex, vcFcFabricVcPortMapVcPortIndex } ::= { vcFcFabricVcPortMapTable 1 } VcFcFabricVcPortMapEntry ::= SEQUENCE { vcFcFabricVcPortMapFcFabricIndex INTEGER, vcFcFabricVcPortMapVcPortIndex INTEGER } vcFcFabricVcPortMapFcFabricIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Index value for vcFabric entry. This index value must correspond to vcFcFabricIndex from vcFcFabricTable." ::= { vcFcFabricVcPortMapEntry 1 } vcFcFabricVcPortMapVcPortIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Index value for VcPort entry. This index value must correspond to vcPortIndex from vcPortTable." ::= { vcFcFabricVcPortMapEntry 2 } -- -- vcProfileNetworkMap Table -- vcProfileNetworkMapTable OBJECT-TYPE SYNTAX SEQUENCE OF VcProfileNetworkMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists a mapping of profiles and associated ports. The objective of this table is to provide a mechanism to access all Networks assigned to a given vcProfile. The second index to the table vcNetworkIndex can be used access network information for a given network" ::= { vcProfileNetworkMap 1 } vcProfileNetworkMapEntry OBJECT-TYPE SYNTAX VcProfileNetworkMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a single network." INDEX { vcProfileNetworkMapProfileIndex, vcProfileNetworkMapConnectionIndex } ::= { vcProfileNetworkMapTable 1 } VcProfileNetworkMapEntry ::= SEQUENCE { vcProfileNetworkMapProfileIndex INTEGER, vcProfileNetworkMapConnectionIndex INTEGER, vcProfileNetworkMapNetworkIndex INTEGER } vcProfileNetworkMapProfileIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Index value for profile entry. This index value must correspond to vcProfileIndex from vcProfileTable." ::= { vcProfileNetworkMapEntry 1 } vcProfileNetworkMapConnectionIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Ethernet network connection number associated with this mapping." ::= { vcProfileNetworkMapEntry 2 } vcProfileNetworkMapNetworkIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Index value to identify the network. This index value must correspond to vcNetworkIndex from vcEnetNetworkTable." ::= { vcProfileNetworkMapEntry 3 } -- -- vcProfileFcFabricMap Table -- vcProfileFcFabricMapTable OBJECT-TYPE SYNTAX SEQUENCE OF VcProfileFcFabricMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists a mapping of profiles and associated ports. The objective of this table is to provide a mechanism to access all Fabrics associated with a given vcProfile. The second index to the table vcFcFabricIndex can be used to access fabric information for a given fabric" ::= { vcProfileFcFabricMap 1 } vcProfileFcFabricMapEntry OBJECT-TYPE SYNTAX VcProfileFcFabricMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a single network." INDEX { vcProfileFcFabricMapProfileIndex, vcProfileFcFabricMapConnectionIndex } ::= { vcProfileFcFabricMapTable 1 } VcProfileFcFabricMapEntry ::= SEQUENCE { vcProfileFcFabricMapProfileIndex INTEGER, vcProfileFcFabricMapConnectionIndex INTEGER, vcProfileFcFabricMapFcFabricIndex INTEGER } vcProfileFcFabricMapProfileIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Index value for profile entry. This index value must correspond to vcProfileIndex from vcProfileTable." ::= { vcProfileFcFabricMapEntry 1 } vcProfileFcFabricMapConnectionIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "FcFabric connection number associated with this mapping." ::= { vcProfileFcFabricMapEntry 2 } vcProfileFcFabricMapFcFabricIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Index value for vcFcFabric entry. This index value must correspond to vcFcFabricIndex from vcFcFabricTable." ::= { vcProfileFcFabricMapEntry 3 } -- -- Notification Objects -- vcDomainMIBNotificationPrefix OBJECT IDENTIFIER ::= { vcDomainMIB 2 } vcDomainMIBNotifications OBJECT IDENTIFIER ::= { vcDomainMIBNotificationPrefix 0 } vcDomainMIBNotificationObjects OBJECT IDENTIFIER ::= { vcDomainMIBNotificationPrefix 1 } -- -- Notifications -- vcDomainManagedStatusChange NOTIFICATION-TYPE OBJECTS { vcDomainManagedStatus } STATUS deprecated DESCRIPTION "The summary managed status of the domain has changed." --#SEVERITY CRITICAL ::= { vcDomainMIBNotifications 1 } vcCheckpointTimeout NOTIFICATION-TYPE OBJECTS { vcDomainCheckpointValid, vcDomainLastCheckpointTime } STATUS current DESCRIPTION "The checkpoint valid status remained false for more than five minutes." --#SEVERITY WARNING ::= { vcDomainMIBNotifications 2 } vcCheckpointCompleted NOTIFICATION-TYPE OBJECTS { vcDomainCheckpointValid } STATUS current DESCRIPTION "A checkpoint operation has completed following a checkpoint timeout trap. The checkpoint valid status is true again. This trap is not sent on every checkpoint completion, but only on a checkpoint completion after a vcCheckpointTimeout trap has been sent." --#SEVERITY INFORMATIONAL ::= { vcDomainMIBNotifications 3 } vcEnetNetworkManagedStatusChange NOTIFICATION-TYPE OBJECTS { vcEnetNetworkManagedStatus, vcEnetNetworkIndex } STATUS deprecated DESCRIPTION "The managed status of network has changed." --#SEVERITY CRITICAL ::= { vcDomainMIBNotifications 4 } vcFcFabricManagedStatusChange NOTIFICATION-TYPE OBJECTS { vcFcFabricManagedStatus, vcFcFabricIndex } STATUS deprecated DESCRIPTION "The managed status of VC FC Fabric has changed." --#SEVERITY CRITICAL ::= { vcDomainMIBNotifications 5 } vcModuleManagedStatusChange NOTIFICATION-TYPE OBJECTS { vcModuleManagedStatus, vcModuleIndex } STATUS deprecated DESCRIPTION "The managed status of VC module has changed." --#SEVERITY CRITICAL ::= { vcDomainMIBNotifications 6 } vcEnclosureManagedStatusChange NOTIFICATION-TYPE OBJECTS { vcEnclosureManagedStatus, vcEnclosureIndex } STATUS deprecated DESCRIPTION "The managed status of the enclosure has changed." --#SEVERITY CRITICAL ::= { vcDomainMIBNotifications 7 } vcPhysicalServerManagedStatusChange NOTIFICATION-TYPE OBJECTS { vcPhysicalServerManagedStatus, vcPhysicalServerIndex } STATUS deprecated DESCRIPTION "The managed status of the server has changed." --#SEVERITY CRITICAL ::= { vcDomainMIBNotifications 8 } vcProfileManagedStatusChange NOTIFICATION-TYPE OBJECTS { vcProfileManagedStatus, vcProfileIndex } STATUS deprecated DESCRIPTION "The managed status of the profile has changed." --#SEVERITY CRITICAL ::= { vcDomainMIBNotifications 9 } vcTestTrap NOTIFICATION-TYPE OBJECTS { vcDomainName } STATUS current DESCRIPTION "A test trap for verifying trap configuration." --#SEVERITY INFORMATIONAL ::= { vcDomainMIBNotifications 10 } vcDomainStackingLinkRendundancyStatusChange NOTIFICATION-TYPE OBJECTS { vcDomainStackingLinkRedundant } STATUS current DESCRIPTION "The stacking link connection redundancy status has changed." --#SEVERITY CRITICAL ::= { vcDomainMIBNotifications 11 } -- -- Definitions for the Enhanced Notifications -- -- Domain Traps vcDomainManagedStatusChanged NOTIFICATION-TYPE OBJECTS { vcDomainManagedStatus, vcDomainRootCause, vcDomainCause, vcDomainReasonCode } STATUS current DESCRIPTION "The managed status of Domain has changed" --#TYPE "VC Domain Managed Status" --#SUMMARY "VC Domain Managed Status is now %d (RootCause: %s, Cause: %s, ReasonCode: %d)" --#ARGUMENTS {0, 1, 2, 3} --#TIMEINDEX 99 --#VARBINDSEVERITY 1 --#SEVERITYMAP "normal=INFORMATIONAL, warning=INFORMATIONAL, minor=MINOR, warning=MAJOR, major=MAJOR, critical=CRITICAL, disabled=INFORMATIONAL, unknown=INFORMATIONAL" ::= { vcDomainMIBNotifications 12 } -- Enclosure Traps vcEnclosureManagedStatusChanged NOTIFICATION-TYPE OBJECTS { vcEnclosureIndex, vcEnclosureName, vcEnclosureManagedStatus, vcEnclosureRootCause, vcEnclosureCause, vcEnclosureReasonCode } STATUS current DESCRIPTION "The managed status of Enclosure has changed" --#TYPE "VC Enclosure Managed Status" --#SUMMARY "VC Enclosure Managed Status is now %d (Index: %d, Name: %s, RootCause: %s, Cause: %s, ReasonCode: %d)" --#ARGUMENTS {2, 0, 1, 3, 4, 5} --#TIMEINDEX 99 --#VARBINDSEVERITY 3 --#SEVERITYMAP "normal=INFORMATIONAL, warning=INFORMATIONAL, minor=MINOR, warning=MAJOR, major=MAJOR, critical=CRITICAL, disabled=INFORMATIONAL, unknown=INFORMATIONAL" ::= { vcDomainMIBNotifications 13 } -- Module Traps vcModuleManagedStatusChanged NOTIFICATION-TYPE OBJECTS { vcModuleIndex, vcModuleManagedStatus, vcModuleRootCause, vcModuleCause, vcModuleReasonCode } STATUS current DESCRIPTION "The managed status of Module has changed" --#TYPE "VC Module Managed Status" --#SUMMARY "VC Module Managed Status is now %d (Index: %d, RootCause: %s, Cause: %s, ReasonCode: %d)" --#ARGUMENTS {1, 0, 2, 3, 4} --#TIMEINDEX 99 --#VARBINDSEVERITY 2 --#SEVERITYMAP "normal=INFORMATIONAL, warning=INFORMATIONAL, minor=MINOR, warning=MAJOR, major=MAJOR, critical=CRITICAL, disabled=INFORMATIONAL, unknown=INFORMATIONAL" ::= { vcDomainMIBNotifications 14 } -- Physical Server Traps vcPhysicalServerManagedStatusChanged NOTIFICATION-TYPE OBJECTS { vcPhysicalServerIndex, vcPhysicalServerManagedStatus, vcPhysicalServerRootCause, vcPhysicalServerCause, vcPhysicalServerReasonCode } STATUS current DESCRIPTION "The managed status of Physical Server has changed" --#TYPE "VC PhysicalServer Managed Status" --#SUMMARY "VC PhysicalServer Managed Status is now %d (Index: %d, RootCause: %s, Cause: %s, ReasonCode: %d)" --#ARGUMENTS {1, 0, 2, 3, 4} --#TIMEINDEX 99 --#VARBINDSEVERITY 2 --#SEVERITYMAP "normal=INFORMATIONAL, warning=INFORMATIONAL, minor=MINOR, warning=MAJOR, major=MAJOR, critical=CRITICAL, disabled=INFORMATIONAL, unknown=INFORMATIONAL" ::= { vcDomainMIBNotifications 16 } -- Fabric Traps vcFcFabricManagedStatusChanged NOTIFICATION-TYPE OBJECTS { vcFcFabricIndex, vcFcFabricName, vcFcFabricManagedStatus, vcFcFabricRootCause, vcFcFabricCause, vcFcFabricReasonCode } STATUS current DESCRIPTION "The managed status of Fabric has changed" --#TYPE "VC Fabric Managed Status" --#SUMMARY "VC Fabric Managed Status is now %d (Index: %d, Name: %s, RootCause: %s, Cause: %s, ReasonCode: %d)" --#ARGUMENTS {2, 0, 1, 3, 4, 5} --#TIMEINDEX 99 --#VARBINDSEVERITY 3 --#SEVERITYMAP "normal=INFORMATIONAL, warning=INFORMATIONAL, minor=MINOR, warning=MAJOR, major=MAJOR, critical=CRITICAL, disabled=INFORMATIONAL, unknown=INFORMATIONAL" ::= { vcDomainMIBNotifications 17 } -- Enet Network Traps vcEnetNetworkManagedStatusChanged NOTIFICATION-TYPE OBJECTS { vcEnetNetworkIndex, vcEnetNetworkName, vcEnetNetworkManagedStatus, vcEnetNetworkRootCause, vcEnetNetworkCause, vcEnetNetworkReasonCode } STATUS current DESCRIPTION "The managed status of Network has changed" --#TYPE "VC Network Managed Status" --#SUMMARY "VC Network Managed Status is now %d (Index: %d, Name: %s, RootCause: %s, Cause: %s, ReasonCode: %d)" --#ARGUMENTS {2, 0, 1, 3, 4, 5} --#TIMEINDEX 99 --#VARBINDSEVERITY 3 --#SEVERITYMAP "normal=INFORMATIONAL, warning=INFORMATIONAL, minor=MINOR, warning=MAJOR, major=MAJOR, critical=CRITICAL, disabled=INFORMATIONAL, unknown=INFORMATIONAL" ::= { vcDomainMIBNotifications 18 } -- Profile Traps vcProfileManagedStatusChanged NOTIFICATION-TYPE OBJECTS { vcProfileIndex, vcProfileName, vcProfileManagedStatus, vcProfileRootCause, vcProfileCause, vcProfileReasonCode } STATUS current DESCRIPTION "The managed status of Profile has changed" --#TYPE "VC Profile Managed Status" --#SUMMARY "VC Profile Managed Status is now %d (Index: %d, Name: %s, RootCause: %s, Cause: %s, ReasonCode: %d)" --#ARGUMENTS {2, 0, 1, 3, 4, 5} --#TIMEINDEX 99 --#VARBINDSEVERITY 3 --#SEVERITYMAP "normal=INFORMATIONAL, warning=INFORMATIONAL, minor=MINOR, warning=MAJOR, major=MAJOR, critical=CRITICAL, disabled=INFORMATIONAL, unknown=INFORMATIONAL" ::= { vcDomainMIBNotifications 19 } -- -- Conformance -- vcDomainMIBConformance OBJECT IDENTIFIER ::= { vcDomainMIB 3 } vcDomainMIBCompliances OBJECT IDENTIFIER ::= { vcDomainMIBConformance 1 } vcDomainMIBGroups OBJECT IDENTIFIER ::= { vcDomainMIBConformance 2 } -- Compliance vcDomainMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for entities which implement the VC MIB." MODULE -- this module MANDATORY-GROUPS { vcDomainGroup, vcEnclosureGroup, vcModuleGroup, vcPortGroup, vcPhysicalServerGroup, vcFcFabricGroup, vcEnetNetworkGroup, vcProfileGroup, vcEnetNetworkVcPortMapGroup, vcFcFabricVcPortMapGroup, vcProfileNetworkMapGroup, vcProfileFcFabricMapGroup, vcManagedStatusNotificationsGroup, vcManagedStatusNotificationsGroup2 } ::= { vcDomainMIBCompliances 1 } -- Units of Conformance vcDomainGroup OBJECT-GROUP OBJECTS { vcDomainName, vcDomainManagedStatus, vcDomainPrimaryAddressType, vcDomainPrimaryAddress, vcDomainCheckpointValid, vcDomainLastCheckpointTime, vcDomainStackingLinkRedundant, vcDomainRootCause, vcDomainCause, vcDomainReasonCode, vcDomainPrimaryAddressIpv6 } STATUS current DESCRIPTION "Virtual Connect Domain level objects." ::= { vcDomainMIBGroups 1 } vcEnclosureGroup OBJECT-GROUP OBJECTS { vcEnclosureIndex, vcEnclosureName, vcEnclosureManagedStatus, vcEnclosureAddressType, vcEnclosureAddress, vcEnclosureUUID, vcEnclosureRootCause, vcEnclosureCause, vcEnclosureReasonCode, vcEnclosureAddressIpv6 } STATUS current DESCRIPTION "Virtual Connect Enclosure objects." ::= { vcDomainMIBGroups 2 } vcModuleGroup OBJECT-GROUP OBJECTS { vcModuleIndex, vcModuleType, vcModuleManagedStatus, vcModulePartNumber, vcModuleFwRev, vcModuleEnclosurePointer, vcModuleLocation, vcModuleAddressType, vcModuleAddress, vcModuleID, vcModuleRootCause, vcModuleCause, vcModuleReasonCode, vcModuleAddressIpv6 } STATUS current DESCRIPTION "Virtual Connect Module objects." ::= { vcDomainMIBGroups 3 } vcPortGroup OBJECT-GROUP OBJECTS { vcPortIndex, vcPortType, vcPortManagedStatus, vcPortManagerAddressType, vcPortManagerAddress, vcPortContainerPointer, vcPortPhysicalPortPointer } STATUS current DESCRIPTION "Virtual Connect Port objects." ::= { vcDomainMIBGroups 4 } vcPhysicalServerGroup OBJECT-GROUP OBJECTS { vcPhysicalServerIndex, vcPhysicalServerEnclosureIndex, vcPhysicalServerManagedStatus, vcPhysicalServerLocation, vcPhysicalServerRootCause, vcPhysicalServerCause, vcPhysicalServerReasonCode } STATUS current DESCRIPTION "Virtual Connect PhysicalServer objects." ::= { vcDomainMIBGroups 5 } vcFcFabricGroup OBJECT-GROUP OBJECTS { vcFcFabricIndex, vcFcFabricName, vcFcFabricManagedStatus, vcFcFabricRootCause, vcFcFabricCause, vcFcFabricReasonCode } STATUS current DESCRIPTION "Virtual Connect FC Fabric objects." ::= { vcDomainMIBGroups 6 } vcEnetNetworkGroup OBJECT-GROUP OBJECTS { vcEnetNetworkIndex, vcEnetNetworkName, vcEnetNetworkManagedStatus, vcEnetNetworkUplinkVlanId, vcEnetNetworkRootCause, vcEnetNetworkCause, vcEnetNetworkReasonCode } STATUS current DESCRIPTION "Virtual Connect Ethernet Network objects." ::= { vcDomainMIBGroups 7 } vcProfileGroup OBJECT-GROUP OBJECTS { vcProfileIndex, vcProfileName, vcProfileManagedStatus, vcProfilePhysicalServerIndex, vcProfileLogicalSerialNumber, vcProfileRootCause, vcProfileCause, vcProfileReasonCode } STATUS current DESCRIPTION "Virtual Connect Server profile objects." ::= { vcDomainMIBGroups 8 } vcEnetNetworkVcPortMapGroup OBJECT-GROUP OBJECTS { vcEnetNetworkVcPortMapNetworkIndex, vcEnetNetworkVcPortMapVcPortIndex } STATUS current DESCRIPTION "VC Ethernet Network to VC Port mapping objects." ::= { vcDomainMIBGroups 9 } vcFcFabricVcPortMapGroup OBJECT-GROUP OBJECTS { vcFcFabricVcPortMapFcFabricIndex, vcFcFabricVcPortMapVcPortIndex } STATUS current DESCRIPTION "VC FC fabric to VC Port mapping objects." ::= { vcDomainMIBGroups 10 } vcProfileNetworkMapGroup OBJECT-GROUP OBJECTS { vcProfileNetworkMapProfileIndex, vcProfileNetworkMapNetworkIndex } STATUS current DESCRIPTION "VC Profile to Ethernet network mapping objects." ::= { vcDomainMIBGroups 11 } vcProfileFcFabricMapGroup OBJECT-GROUP OBJECTS { vcProfileFcFabricMapProfileIndex, vcProfileFcFabricMapFcFabricIndex } STATUS current DESCRIPTION "VC Profile to FC fabric mapping objects." ::= { vcDomainMIBGroups 12 } vcManagedStatusNotificationsGroup NOTIFICATION-GROUP NOTIFICATIONS { vcDomainManagedStatusChange, vcCheckpointTimeout, vcCheckpointCompleted, vcEnetNetworkManagedStatusChange, vcFcFabricManagedStatusChange, vcModuleManagedStatusChange, vcEnclosureManagedStatusChange, vcPhysicalServerManagedStatusChange, vcProfileManagedStatusChange, vcTestTrap, vcDomainStackingLinkRendundancyStatusChange } STATUS deprecated DESCRIPTION "The notifications which indicate specific changes in the Virtual Connect Domain managed status." ::= { vcDomainMIBGroups 13 } vcManagedStatusNotificationsGroup2 NOTIFICATION-GROUP NOTIFICATIONS { vcDomainManagedStatusChanged, vcCheckpointTimeout, vcCheckpointCompleted, vcEnetNetworkManagedStatusChanged, vcFcFabricManagedStatusChanged, vcModuleManagedStatusChanged, vcEnclosureManagedStatusChanged, vcPhysicalServerManagedStatusChanged, vcProfileManagedStatusChanged, vcTestTrap, vcDomainStackingLinkRendundancyStatusChange } STATUS current DESCRIPTION "The notifications which indicate specific changes in the Virtual Connect Domain managed status." ::= { vcDomainMIBGroups 14 } END