-- ========================================================================== -- Copyright (c) 2010-2013 Hewlett-Packard Development Company, L.P. -- -- Description: The purpose of this MIB file is to provide the definition of -- voice call record. -- Reference: -- Version: V1.1 -- History: -- V1.0 2008-02-17 Initial version, created by Tian Xiaoqiang, Qu Jin -- V1.1 2009-12-09 Add g729br8 to "HpnicfCodecType", Wang Tong -- ========================================================================== HPN-ICF-VOICE-CALL-HISTORY-MIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE, MODULE-IDENTITY, Integer32, Gauge32 FROM SNMPv2-SMI InetAddressType, InetAddress FROM INET-ADDRESS-MIB InterfaceIndexOrZero FROM IF-MIB AbsoluteCounter32 FROM DIAL-CONTROL-MIB TEXTUAL-CONVENTION, DisplayString, TimeStamp FROM SNMPv2-TC hpnicfVoice FROM HPN-ICF-OID-MIB; hpnicfVoCallHistory MODULE-IDENTITY LAST-UPDATED "200802170000Z" ORGANIZATION "" CONTACT-INFO "" DESCRIPTION "This MIB file is to provide the definition of voice call history record information." REVISION "200802170000Z" DESCRIPTION "The initial version of this MIB file." ::= { hpnicfVoice 16 } -- ====================================== -- Type declaration -- ====================================== HpnicfGUid ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Represents a global call identifier. The global call identifier is used as a unique identifier for an end-to-end call. A zero length HpnicfGUid indicates no value for the global call identifier." SYNTAX OCTET STRING(SIZE(0..16)) HpnicfCodecType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Type of Codec." SYNTAX INTEGER { g711a(1), g711u(2), g723r53(3), g723r63(4), g729r8(5), g729a(6), g726r16(7), g726r24(8), g726r32(9), g726r40(10), unknown(11), g729br8(12) } hpnicfVoiceCallHistoryObjects OBJECT IDENTIFIER ::= { hpnicfVoCallHistory 1 } -- =========================================================================== -- hpnicfCallHistoryTable -- =========================================================================== -- callHistoryTable -- Table to store the past call information. The destination number -- and the call connect and disconnect time, and the disconnection -- cause are stored. These calls could be circuit switched or virtual -- circuits. History of each and every call is stored, of successful -- calls as well as of unsuccessful and rejected calls. An entry will -- be created when a call is cleared. hpnicfCallHistoryTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfCallHistoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing information about specific calls to a specific destination." ::= { hpnicfVoiceCallHistoryObjects 1 } hpnicfCallHistoryEntry OBJECT-TYPE SYNTAX HpnicfCallHistoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The information regarding a single connection." INDEX { hpnicfCallHistoryIndex } ::= { hpnicfCallHistoryTable 1 } HpnicfCallHistoryEntry ::= SEQUENCE { hpnicfCallHistoryIndex Integer32, hpnicfCallHistorySetupTime TimeStamp, hpnicfCallHistoryConnectTime TimeStamp, hpnicfCallHistoryTerminateTime TimeStamp, hpnicfCallHistoryPeerAddress DisplayString, hpnicfCallHistoryPeerId Integer32, hpnicfCallHistoryLogicalIfIndex InterfaceIndexOrZero, hpnicfCallHistoryCallOrigin INTEGER, hpnicfCallHistoryChargedUnits AbsoluteCounter32, hpnicfCallHistoryInfoType INTEGER, hpnicfCallHistoryTransmitPackets AbsoluteCounter32, hpnicfCallHistoryTransmitBytes AbsoluteCounter32, hpnicfCallHistoryReceivePackets AbsoluteCounter32, hpnicfCallHistoryReceiveBytes AbsoluteCounter32 } hpnicfCallHistoryIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of the call history table. It's a monotonically increasing integer for the sole purpose of indexing call disconnection events. When it reaches to the maximum value, the value will back to 1." ::= { hpnicfCallHistoryEntry 1 } hpnicfCallHistorySetupTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime when the call was started." ::= { hpnicfCallHistoryEntry 2 } hpnicfCallHistoryConnectTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime when the call was connected. If the call is not connected, this object will have a value of zero." ::= { hpnicfCallHistoryEntry 3 } hpnicfCallHistoryTerminateTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime when the call was terminated." ::= { hpnicfCallHistoryEntry 4 } hpnicfCallHistoryPeerAddress OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The number this call was connected to. If the number is not available, it will have a length of zero." ::= { hpnicfCallHistoryEntry 5 } hpnicfCallHistoryPeerId OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies a single peer. This is the Id value of the peer table entry to which this call was made. If a peer table entry for this call does not exist or is unknown, the value of this object will be zero." ::= { hpnicfCallHistoryEntry 6 } hpnicfCallHistoryLogicalIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "This is the ifIndex value of the logical interface through which this call was made. For ISDN media, this would be the ifIndex of the B channel which was used for this call. If the ifIndex value is unknown, the value of this object will be zero." ::= { hpnicfCallHistoryEntry 7 } hpnicfCallHistoryCallOrigin OBJECT-TYPE SYNTAX INTEGER { originate(1), answer(2), callback(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The call origin. originate The call that is initiated. answer The call that is accepted. callback Either rejects the call and then calls back, or uses the 'Reverse charging' information element if it is available. Note that callback(3) is supposed to control charging, not security, and applies to callback prior to accepting a call. Callback for security reasons can be handled using PPP callback." ::= { hpnicfCallHistoryEntry 8 } hpnicfCallHistoryChargedUnits OBJECT-TYPE SYNTAX AbsoluteCounter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of charged units for this connection. For incoming calls or if charging information is not supplied by the switch, the value of this object will be zero." ::= { hpnicfCallHistoryEntry 9 } hpnicfCallHistoryInfoType OBJECT-TYPE SYNTAX INTEGER { other(1), speech(2), unrestrictedDigital(3), unrestrictedDigital56(4), restrictedDigital(5), audio31(6), audio7(7), video(8), packetSwitched(9), fax(10) } MAX-ACCESS read-only STATUS current DESCRIPTION "The information type for this call. other E.g. for non-isdn media. speech Speech. unrestrictedDigital Unrestricted digital information with 64k rate adaption. unrestrictedDigital56 Unrestricted digital information with 56k rate adaption. restrictedDigital Restricted digital information. audio31 3.1 kHz audio. audio7 7 kHz audio. video Video. packetSwitched Packetswitch. fax Fax." ::= { hpnicfCallHistoryEntry 10 } hpnicfCallHistoryTransmitPackets OBJECT-TYPE SYNTAX AbsoluteCounter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets which were transmitted while this call was active." ::= { hpnicfCallHistoryEntry 11 } hpnicfCallHistoryTransmitBytes OBJECT-TYPE SYNTAX AbsoluteCounter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bytes which were transmitted for this call." ::= { hpnicfCallHistoryEntry 12 } hpnicfCallHistoryReceivePackets OBJECT-TYPE SYNTAX AbsoluteCounter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets which were received for this call." ::= { hpnicfCallHistoryEntry 13 } hpnicfCallHistoryReceiveBytes OBJECT-TYPE SYNTAX AbsoluteCounter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bytes which were received for this call." ::= { hpnicfCallHistoryEntry 14 } -- =========================================================================== -- hpnicfVoiceCallHistoryTable -- =========================================================================== hpnicfVoiceCallHistoryTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfVoiceCallHistoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is the voice extension to the call history table of DIAL-CONTROL-MIB. It contains voice encapsulation call leg information that is derived from the statistics of lower layer telephony interface." ::= { hpnicfVoiceCallHistoryObjects 2 } hpnicfVoiceCallHistoryEntry OBJECT-TYPE SYNTAX HpnicfVoiceCallHistoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The information regarding a extended voice call history information." INDEX { hpnicfCallHistoryIndex } ::= { hpnicfVoiceCallHistoryTable 1 } HpnicfVoiceCallHistoryEntry ::= SEQUENCE { hpnicfVoCallHistoryConnectionId HpnicfGUid, hpnicfVoCallHistoryTxDuration Gauge32, hpnicfVoCallHistoryVoiceTxDuration Gauge32, hpnicfVoCallHistoryFaxTxDuration Gauge32, hpnicfVoCallHistoryCoderType HpnicfCodecType, hpnicfVoCallHistoryImgPageCount Gauge32 } hpnicfVoCallHistoryConnectionId OBJECT-TYPE SYNTAX HpnicfGUid MAX-ACCESS read-only STATUS current DESCRIPTION "The global call identifier of circuit switched network for the gateway call." ::= { hpnicfVoiceCallHistoryEntry 1 } hpnicfVoCallHistoryTxDuration OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Duration of transmit path open from this peer to the voice gateway for the call. The units is milliseconds." ::= { hpnicfVoiceCallHistoryEntry 2 } hpnicfVoCallHistoryVoiceTxDuration OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Duration of voice transmitted from this peer to voice gateway for this call. The voice utilization rate can be obtained by dividing this by hpnicfVoCallHistoryTxDuration object. The units is milliseconds." ::= { hpnicfVoiceCallHistoryEntry 3 } hpnicfVoCallHistoryFaxTxDuration OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Duration of fax transmitted from this peer to voice gateway for this call. The fax utilization rate can be obtained by dividing this by hpnicfVoCallHistoryTxDuration object. The units is milliseconds." ::= { hpnicfVoiceCallHistoryEntry 4 } hpnicfVoCallHistoryCoderType OBJECT-TYPE SYNTAX HpnicfCodecType MAX-ACCESS read-only STATUS current DESCRIPTION "The negotiated coder type. It specifies the encode type to the PSTN leg of a call." ::= { hpnicfVoiceCallHistoryEntry 5 } hpnicfVoCallHistoryImgPageCount OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of fax related image pages are received or transmitted via the peer for the call. The units is page." ::= { hpnicfVoiceCallHistoryEntry 6 } -- =========================================================================== -- hpnicfVoiceVoIPCallHistoryTable -- =========================================================================== hpnicfVoiceVoIPCallHistoryTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfVoiceVoIPCallHistoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is the VoIP extension to the call active table of DIAL-CONTROL-MIB. It contains VoIP call leg information about specific VoIP call destination." ::= { hpnicfVoiceCallHistoryObjects 3 } hpnicfVoiceVoIPCallHistoryEntry OBJECT-TYPE SYNTAX HpnicfVoiceVoIPCallHistoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The information regarding a extended VoIP call history information." INDEX {hpnicfCallHistoryIndex } ::= { hpnicfVoiceVoIPCallHistoryTable 1 } HpnicfVoiceVoIPCallHistoryEntry ::= SEQUENCE { hpnicfVoVoIPCallHistoryConnectionId HpnicfGUid, hpnicfVoVoIPCallHistoryRemSigIPType InetAddressType, hpnicfVoVoIPCallHistoryRemSigIPAddr InetAddress, hpnicfVoVoIPCallHistoryRemSigPort Integer32, hpnicfVoVoIPCallHistoryRemMedIPType InetAddressType, hpnicfVoVoIPCallHistoryRemMedIPAddr InetAddress, hpnicfVoVoIPCallHistoryRemMedPort Integer32, hpnicfVoVoIPCallHistorySessProtocol INTEGER, hpnicfVoVoIPCallHistoryCoderType HpnicfCodecType } hpnicfVoVoIPCallHistoryConnectionId OBJECT-TYPE SYNTAX HpnicfGUid MAX-ACCESS read-only STATUS current DESCRIPTION "The global call identifier of packet-switched network for the gateway call." ::= { hpnicfVoiceVoIPCallHistoryEntry 1 } hpnicfVoVoIPCallHistoryRemSigIPType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The type of remote system signalling IP address for the VoIP call." ::= { hpnicfVoiceVoIPCallHistoryEntry 2 } hpnicfVoVoIPCallHistoryRemSigIPAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Remote system signalling IP address for the VoIP call." ::= { hpnicfVoiceVoIPCallHistoryEntry 3 } hpnicfVoVoIPCallHistoryRemSigPort OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Remote system UDP listener signalling port to which to transmit voice packets." ::= { hpnicfVoiceVoIPCallHistoryEntry 4 } hpnicfVoVoIPCallHistoryRemMedIPType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The type of remote system media IP address for the VoIP call." ::= { hpnicfVoiceVoIPCallHistoryEntry 5 } hpnicfVoVoIPCallHistoryRemMedIPAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Remote system media IP address for the VoIP call." ::= { hpnicfVoiceVoIPCallHistoryEntry 6 } hpnicfVoVoIPCallHistoryRemMedPort OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Remote system UDP listener media port to which to transmit voice packets." ::= { hpnicfVoiceVoIPCallHistoryEntry 7 } hpnicfVoVoIPCallHistorySessProtocol OBJECT-TYPE SYNTAX INTEGER { unknown(1), h323(2), sip(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The object specifies the session protocol to be used for internet call between local and remote router via IP backbone. unknown The protocol is unknown. h323 The protocol is H323. sip The protocol is session initiation." ::= { hpnicfVoiceVoIPCallHistoryEntry 8 } hpnicfVoVoIPCallHistoryCoderType OBJECT-TYPE SYNTAX HpnicfCodecType MAX-ACCESS read-only STATUS current DESCRIPTION "The negotiated coder type. It specifies the encode type to the VoIP leg of a call." ::= { hpnicfVoiceVoIPCallHistoryEntry 9 } END