-- ====================================================================
-- Copyright (c) 2010-2013 Hewlett-Packard Development Company, L.P.
--
-- Description: DLSW Specific Features MIB
-- Reference: RFC2024
-- Version: V1.0
-- History:
--  V1.0  2005-07-20, LiuYingquan
--    Initial version
-- ====================================================================
HPN-ICF-SNA-DLSW-EXT-MIB    DEFINITIONS ::= BEGIN
IMPORTS
    MODULE-IDENTITY,
    OBJECT-TYPE,
    TimeTicks,
    Integer32,
    Counter32
        FROM SNMPv2-SMI
    RowStatus
        FROM SNMPv2-TC
    ifIndex
        FROM RFC1213-MIB
    InetAddress,
    InetAddressType
        FROM INET-ADDRESS-MIB
    dlswTConnConfigEntry,
    dlswTConnOperEntry,
    dlswTConnTcpConfigEntry,
    MacAddressNC,
    LFSize,
    TAddress
        FROM DLSW-MIB

    hpnicfCommon
        FROM HPN-ICF-OID-MIB;

hpnicfDlswExt MODULE-IDENTITY
    LAST-UPDATED "200507201900Z"        -- Jul 20, 2005 at 19:00 GMT
    ORGANIZATION
        ""
    CONTACT-INFO
        ""
    DESCRIPTION
        "The MIB module for management of specific Data Link
         Switching protocol enhancements. DLSw is described in
         RFC 1795, RFC 2024 and RFC2166."
    REVISION "200507201900Z"   -- Jul 20, 2005 at 19:00 GMT
    DESCRIPTION
            "Initial version of this MIB module."
    ::= { hpnicfCommon 62 }

hpnicfDlswExtMIBObjects OBJECT IDENTIFIER ::= { hpnicfDlswExt 1 }

hpnicfdeNode           OBJECT IDENTIFIER ::= { hpnicfDlswExtMIBObjects 1 }
hpnicfdeTConn          OBJECT IDENTIFIER ::= { hpnicfDlswExtMIBObjects 2 }
hpnicfdeBridge         OBJECT IDENTIFIER ::= { hpnicfDlswExtMIBObjects 3 }
hpnicfdeQllc           OBJECT IDENTIFIER ::= { hpnicfDlswExtMIBObjects 4 }
hpnicfdeSdlc           OBJECT IDENTIFIER ::= { hpnicfDlswExtMIBObjects 5 }
hpnicfdeLlc2           OBJECT IDENTIFIER ::= { hpnicfDlswExtMIBObjects 6 }
hpnicfdeReachableCache OBJECT IDENTIFIER ::= { hpnicfDlswExtMIBObjects 7 }
hpnicfdeEthernetBackup OBJECT IDENTIFIER ::= { hpnicfDlswExtMIBObjects 8 }


-- ====================================================================
-- DLSw Extension Node Objects
-- ====================================================================

hpnicfdeNodeVendorID OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE (3))
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value identifies the manufacturer's IEEE-assigned
        Organizationally Unique Identifier (OUI) of this DLSw.
        This information is reported in DLSw Capabilities
        Exchange."
    REFERENCE
        "DLSW: Switch-to-Switch Protocol RFC 1795."
    ::= { hpnicfdeNode 1 }

hpnicfdeNodeIpAddrType OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The type of ip address: IPv4 or IPv6."
    ::= { hpnicfdeNode 2 }

hpnicfdeNodeLocalAddr OBJECT-TYPE
    SYNTAX      InetAddress
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Local peer ip address. This ip address must have been
        configured for a port on the router. If no local peer
        ip address is configured, then this object will be the
        empty string."
    DEFVAL     { ''H }    -- the empty string
    ::= { hpnicfdeNode 3 }

hpnicfdeNodePriority OBJECT-TYPE
    SYNTAX      Integer32 (1..5 | 65535)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Peer priority advertised to remote peers in the DLSw Capabilities
        Exchange. If an end station can reach through more
        than one peer, the priority of each peer will be considered when
        a circuit is established.
        A lower priority indicates that peer will be the
        preferred choice if there are more than one path to the
        destination. A value of 65535 indicates the value is meaningless."
    DEFVAL      { 3 }
    ::= { hpnicfdeNode 4 }

hpnicfdeNodeInitPacingWindow OBJECT-TYPE
    SYNTAX      Integer32 (1..2000 | 65535)
    UNITS       "packets"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Initial pacing window size. This is the starting size of the
        pacing window. DLSw uses an adaptive pacing flow control
        algorithm that automatically adjusts to congestion levels in
        the network. Pacing windows are used to control how many packets
        may be sent to a peer before acknowlegement.
        A value of 65535 indicates the value is meaningless."
    DEFVAL      { 40 }
    ::= { hpnicfdeNode 5 }

hpnicfdeNodeMaxPacingWindow OBJECT-TYPE
    SYNTAX      Integer32 (1..2000 | 65535)
    UNITS       "packets"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Maximum pacing window size. This is the largest size that
        the pacing window will grow to. DLSw uses an adaptive pacing
        flow control algorithm that automatically adjusts to congestion
        levels in the network. Pacing windows are used to control
        how many packets may be sent to a peer before acknowlegement."
    DEFVAL      { 50 }
    ::= { hpnicfdeNode 6 }

hpnicfdeNodeKeepAliveInterval OBJECT-TYPE
    SYNTAX      Integer32 (0..2000 | 65535)
    UNITS       "seconds"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Default remote peer keepalive interval in seconds.
        The keepalive parameter refers to how often DLSw peers
        send peer keep alives to each other. These periodic messages
        allow DLSw to keep track of the state of all peers.
        If set to zero, no keepalives are sent.
        A value of 65535 indicates the value is meaningless."
    DEFVAL      { 30 }
    ::= { hpnicfdeNode 7 }

hpnicfdeNodePermitDynamic OBJECT-TYPE
    SYNTAX      INTEGER
                {
                permitDynamic(1),
                forbidDynamic(2),
                unknown(65535)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "To accept connections from non-configured remote peer when
        permitDynamic is specified."
    DEFVAL      { forbidDynamic }
    ::= { hpnicfdeNode 8 }

hpnicfdeNodeConnTimeout OBJECT-TYPE
    SYNTAX      Integer32 (1..65535)
    UNITS       "seconds"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Define connected state timer."
    DEFVAL      { 300 }
    ::= { hpnicfdeNode 9 }

hpnicfdeNodeLocalPendTimeout OBJECT-TYPE
    SYNTAX      Integer32 (1..65535)
    UNITS       "seconds"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Define connected state timer."
    DEFVAL      { 30 }
    ::= { hpnicfdeNode 10 }

hpnicfdeNodeRemotePendTimeout OBJECT-TYPE
    SYNTAX      Integer32 (1..65535)
    UNITS       "seconds"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Define connected state timer."
    DEFVAL      { 30 }
    ::= { hpnicfdeNode 11 }

hpnicfdeNodeSnaCacheTimeout OBJECT-TYPE
    SYNTAX      Integer32 (1..65535)
    UNITS       "seconds"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Define connected state timer."
    DEFVAL      { 120 }
    ::= { hpnicfdeNode 12 }

hpnicfdeNodeExplorerTimeout OBJECT-TYPE
    SYNTAX      Integer32 (1..65535)
    UNITS       "seconds"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Define explorer timer."
    DEFVAL      { 30 }
    ::= { hpnicfdeNode 13 }

hpnicfdeNodeExplorerWaitTimeout OBJECT-TYPE
    SYNTAX      Integer32 (1..65535)
    UNITS       "seconds"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Define explorer waiting timer."
    DEFVAL      { 30 }
    ::= { hpnicfdeNode 14 }

hpnicfdeNodeConfigSapList OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE (16))
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The SAP list indicates which SAPs are allowed.
        Only SAPs with even numbers are represented,
        in the form of the most significant bit of the first
        octet representing the SAP 0, the next most significant
        bit representing the SAP 2, to the least significant
        bit of the last octet representing the SAP 254. Data
        link switching is allowed for those SAPs which have
        one in its corresponding bit, not allowed otherwise.
        The whole SAP list has to be changed together. Changing
        the SAP list affects only new circuit establishments
        and has no effect on established circuits.

        This list can be used to restrict specific partners
        from knowing about all the SAPs used by DLSw on all its
        interfaces (these are represented in hpnicfdeIfSapList for
        each interface). For instance, one may want to run NetBIOS
        with some partners but not others.

        If a node supports sending run-time capabilities exchange
        messages, changes to this object should cause that action.
        When to start the run-time capabilities exchange is
        implementation-specific.

        The DEFVAL below indicates support for SAPs 0, 2, 4, 6, 8, A, C and E."
    DEFVAL      { 'FF000000000000000000000000000000'h }
    ::= { hpnicfdeNode 15 }

hpnicfdeNodeMaxTransmission OBJECT-TYPE
    SYNTAX      Integer32 (1..10)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The maximum retry times for TCP packet.
        Default value is 5."
    DEFVAL      { 5 }
    ::= { hpnicfdeNode 16 }

hpnicfdeNodeMulticastStatus OBJECT-TYPE
    SYNTAX      INTEGER
                {
                enabled(1),
                disabled(2)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Multicast support status. It is disabled by default."
    DEFVAL      { disabled }
    ::= { hpnicfdeNode 17 }

hpnicfdeNodeMulticastAddress OBJECT-TYPE
    SYNTAX      InetAddress
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Multicast address. Default is 224.0.10.0.
        When the hpnicfdeNodeMulticastStatus is disabled,
        the multicast address is reset to 0.0.0.0."
    ::= { hpnicfdeNode 18 }

hpnicfdeNodeResetTcpAll OBJECT-TYPE
    SYNTAX      INTEGER
                {
                reset(1)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Reset all TCP circuit switch.
        Any return value is meaningless."
    ::= { hpnicfdeNode 19 }

hpnicfdeNodeStCapTcpNum OBJECT-TYPE
    SYNTAX      Integer32 (0..255)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Tcp number reported in DLSw Capabilities Exchange."
    ::= { hpnicfdeNode 20 }

hpnicfdeNodeTcpQueueMax OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The max length of TCP queue."
    DEFVAL      { 200 }
    ::= { hpnicfdeNode 21 }


-- ====================================================================
-- DLSw Extension Transport Connection Configuration Table
-- ====================================================================
hpnicfdeTConnConfigTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF HpnicfdeTConnConfigEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table defines the peer transport connections
        that will be initiated or accepted by this DLSw.

        This table augments dlswTConnConfigTable."
    ::= { hpnicfdeTConn 1 }

hpnicfdeTConnConfigEntry OBJECT-TYPE
    SYNTAX      HpnicfdeTConnConfigEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A list of objects that define specific configuration for
        a DLSw peer transport connection."
    AUGMENTS    { dlswTConnConfigEntry }
    ::= { hpnicfdeTConnConfigTable 1 }

HpnicfdeTConnConfigEntry ::=
    SEQUENCE {
        hpnicfdeTConnConfigVersion              OCTET STRING,
        hpnicfdeTConnConfigPriority             Integer32,
        hpnicfdeTConnConfigLfSize               LFSize,
        hpnicfdeTConnConfigKeepaliveIntval    Integer32,
        hpnicfdeTConnConfigBackup               INTEGER,
        hpnicfdeTConnConfigBackupTAddr          TAddress,
        hpnicfdeTConnConfigBackupLinger         Integer32
    }

hpnicfdeTConnConfigVersion OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE (2))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This value identifies which version (first octet) and release
        (second octet) of the DLSw standard is supported by this
        partner DLSw. This information is obtained from a DLSw
        Capabilities Exchange message received from the partner DLSw.
        A string of zero length is returned before a Capabilities
        Exchange message is received, or if one is never received.
        A conceptual row with a hpnicfdeTConnOperState of 'connected' but
        a zero length partner version indicates that the partner is
        a non-standard DLSw partner.

        If an implementation chooses to keep hpnicfdeTConnOperEntrys in
        the 'disconnected' state, this value should remain unchanged."
    ::= { hpnicfdeTConnConfigEntry 1 }

hpnicfdeTConnConfigPriority OBJECT-TYPE
    SYNTAX      Integer32 (1..5)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The priority for remote peer."
    DEFVAL      { 3 }
    ::= { hpnicfdeTConnConfigEntry 2 }

hpnicfdeTConnConfigLfSize OBJECT-TYPE
    SYNTAX      LFSize
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The largest frame size."
    ::= { hpnicfdeTConnConfigEntry 3 }

hpnicfdeTConnConfigKeepaliveIntval OBJECT-TYPE
    SYNTAX      Integer32 (1..1200)
    UNITS       "seconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The keepalive interval value."
    DEFVAL      { 30 }
    ::= { hpnicfdeTConnConfigEntry 4 }

hpnicfdeTConnConfigBackup OBJECT-TYPE
    SYNTAX      INTEGER
                {
                yes(1),
                no(2)
                }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The current remote peer is configured as the
        backup of another configured remote peer."
    DEFVAL      { no }
    ::= { hpnicfdeTConnConfigEntry 5 }

hpnicfdeTConnConfigBackupTAddr OBJECT-TYPE
    SYNTAX      TAddress
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "It is the ip address of a configured remote peer of which
        the current remote peer is configrued as backup."
    ::= { hpnicfdeTConnConfigEntry 6 }

hpnicfdeTConnConfigBackupLinger OBJECT-TYPE
    SYNTAX      Integer32 (0..1440)
    UNITS       "minutes"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Backup peer linger."
    DEFVAL      { 5 }
    ::= { hpnicfdeTConnConfigEntry 7 }

-- ====================================================================
-- DLSw Extension Transport Connection Operation Table
-- ====================================================================
hpnicfdeTConnOperTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF HpnicfdeTConnOperEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A list of peer transport connections.
        Each connected peer will create a conceptual row in the table.
        When the peer disconnects, the row will be deleted from the table.

        This table augments dlswTConnOperTable."
    ::= { hpnicfdeTConn 2 }

hpnicfdeTConnOperEntry OBJECT-TYPE
    SYNTAX      HpnicfdeTConnOperEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A list of objects that contain spefific operational
        information for a DLSw peer transport connection."
    AUGMENTS    { dlswTConnOperEntry }
    ::= { hpnicfdeTConnOperTable 1 }

HpnicfdeTConnOperEntry ::=
    SEQUENCE {
        hpnicfdeTConnOperPeerType         INTEGER,
        hpnicfdeTConnOperVendorID         OCTET STRING,
        hpnicfdeTConnOperVersionString    OCTET STRING,
        hpnicfdeTConnOperUpTime           TimeTicks,
        hpnicfdeTConnOperMulticastAddress TAddress,
        hpnicfdeTConnOperStCapTcpNumber   Integer32,
        hpnicfdeTConnOperRecvPkts         Counter32,
        hpnicfdeTConnOperSendPkts         Counter32,
        hpnicfdeTConnOperDropPkts         Counter32
    }

hpnicfdeTConnOperPeerType OBJECT-TYPE
    SYNTAX      INTEGER
                {
                configured(1),
                learningDynamic(2),
                other(3)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The current remote peer is configured when the value is 'configured'."
    ::= { hpnicfdeTConnOperEntry 1 }

hpnicfdeTConnOperVendorID OBJECT-TYPE
    SYNTAX      OCTET STRING
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value identifies the manufacturer's IEEE-assigned
        Organizationally Unique Identifier (OUI) of remote peer."
    ::= { hpnicfdeTConnOperEntry 2 }

hpnicfdeTConnOperVersionString OBJECT-TYPE
    SYNTAX      OCTET STRING
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Version information of remote peer. The length up to 512 bytes."
    ::= { hpnicfdeTConnOperEntry 3 }

hpnicfdeTConnOperUpTime OBJECT-TYPE
    SYNTAX      TimeTicks
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The amount of time (in seconds) since this transport
        connection last entered the 'connected' state."
    ::= { hpnicfdeTConnOperEntry 4 }

hpnicfdeTConnOperMulticastAddress OBJECT-TYPE
    SYNTAX      TAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "When remote peer supports DLSw2.0, this node identifies
        its multicast address."
    ::= { hpnicfdeTConnOperEntry 5 }

hpnicfdeTConnOperStCapTcpNumber OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Number of tcp supported when capabilities exchanging."
    ::= { hpnicfdeTConnOperEntry 6 }

hpnicfdeTConnOperRecvPkts OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of Switch-to-Switch Protocol (SSP) messages
        received on this tcp transport connection."
    ::= { hpnicfdeTConnOperEntry 7 }

hpnicfdeTConnOperSendPkts OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of SSP messages
        sent on this tcp transport connection."
    ::= { hpnicfdeTConnOperEntry 8 }

hpnicfdeTConnOperDropPkts OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of SSP messages
        dropped on this tcp transport connection."
    ::= { hpnicfdeTConnOperEntry 9 }

-- ====================================================================
-- DLSw Extension TCP Transport Connection Specific Configuration
-- ====================================================================
hpnicfdeTConnTcpConfigTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF HpnicfdeTConnTcpConfigEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "This table defines the TCP transport connections that
        will be either initiated by or accepted by this DSLw.
        It augments the entries in dlswTConnConfigTable whose
        domain is dlswTCPDomain. In other words for each conceptual row
        in the dlswTConnConfigTable, if the dlswTConnConfigTDomain is
        dlswTCPDomain, that conceptual row will be augmented by this
        table.

        dlswTCPDomain, dlswTConnConfigTable, and dlswTConnConfigTDomain
        are all imported from DLSW-MIB (RFC 2024).

        This table augments dlswTConnTcpConfigTable."
    ::= { hpnicfdeTConn 3 }

hpnicfdeTConnTcpConfigEntry OBJECT-TYPE
    SYNTAX      HpnicfdeTConnTcpConfigEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "A list of objects that define specific configuration for
        a DLSw peer transport connection within the dlswTCPDomain.
        dlswTCPDomain is imported from DLSW-MIB (RFC 2024)."
    AUGMENTS    { dlswTConnTcpConfigEntry }
    ::= { hpnicfdeTConnTcpConfigTable 1 }

HpnicfdeTConnTcpConfigEntry ::=
    SEQUENCE {
        hpnicfdeTConnTcpConfigQueueMax  Integer32
    }

hpnicfdeTConnTcpConfigQueueMax  OBJECT-TYPE
    SYNTAX      Integer32 (50..2000)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Maximum output TCP queue size for this remote peer.
        For DLSw over TCP encapsulation, packets may be queued
        due to congestion of the TCP network. This variable
        is used to set the output queue maximum of the underlying
        TCP connection for the peer represented by the conceptual row."
    DEFVAL      { 200 }
    ::= { hpnicfdeTConnTcpConfigEntry 1 }

-- ====================================================================
-- DLSw Bridge MIB-Group
-- ====================================================================
hpnicfdeBridgeTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF HpnicfdeBridgeEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A list of bridge group which is serving for DLSw."
    ::= { hpnicfdeBridge 1 }

hpnicfdeBridgeEntry OBJECT-TYPE
    SYNTAX      HpnicfdeBridgeEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A list of bridge information."
    INDEX       { hpnicfdeBridgeNumIndex }
    ::= { hpnicfdeBridgeTable 1 }

HpnicfdeBridgeEntry ::=
    SEQUENCE {
        hpnicfdeBridgeNumIndex   Integer32,
        hpnicfdeBridgeRowStatus  RowStatus
    }

hpnicfdeBridgeNumIndex OBJECT-TYPE
    SYNTAX      Integer32 (1..255)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This value identifies the bridge number."
    ::= { hpnicfdeBridgeEntry 1 }

hpnicfdeBridgeRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "RowStatus."
    ::= { hpnicfdeBridgeEntry 2 }

-- ====================================================================
-- DLSw Bridge group number and interface
-- ====================================================================
hpnicfdeBridgeIfTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF HpnicfdeBridgeIfEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The list of interface on which DLSw is active."
    ::= { hpnicfdeBridge 2 }

hpnicfdeBridgeIfEntry OBJECT-TYPE
    SYNTAX      HpnicfdeBridgeIfEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The list of bridge interface information."
    INDEX       { ifIndex }
    ::= { hpnicfdeBridgeIfTable 1 }

HpnicfdeBridgeIfEntry ::=
    SEQUENCE {
        hpnicfdeBridgeIfBrgGrp      Integer32,
        hpnicfdeBridgeIfRowStatus   RowStatus
    }

hpnicfdeBridgeIfBrgGrp OBJECT-TYPE
    SYNTAX      Integer32 (1..255)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This value identifies the bridge number attached
        to the interface."
    ::= { hpnicfdeBridgeIfEntry 1 }

hpnicfdeBridgeIfRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "RowStatus."
    ::= { hpnicfdeBridgeIfEntry 2 }

-- ====================================================================
-- DLSw Extension QLLC Port Configuration Table
-- ====================================================================
hpnicfdeQllcTable  OBJECT-TYPE
    SYNTAX      SEQUENCE OF HpnicfdeQllcEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "The table defines attributes related for those
        QLLC that participate in data link switching."
    ::= { hpnicfdeQllc 1 }

hpnicfdeQllcEntry  OBJECT-TYPE
    SYNTAX      HpnicfdeQllcEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "The ifIndex belongs to the interface which link protocol is x.25."
    INDEX       { ifIndex }
    ::= { hpnicfdeQllcTable 1 }

HpnicfdeQllcEntry ::=
    SEQUENCE {
        hpnicfQllcX121Address  Integer32,
        hpnicfQllcLocalMac     MacAddressNC,
        hpnicfQllcLocalSap     OCTET STRING,
        hpnicfQllcRemoteMac    MacAddressNC,
        hpnicfQllcRemoteSap    OCTET STRING,
        hpnicfQllcRowStatus    RowStatus
    }

hpnicfQllcX121Address  OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
       "X.121 address."
    ::= { hpnicfdeQllcEntry 1 }

hpnicfQllcLocalMac  OBJECT-TYPE
    SYNTAX      MacAddressNC
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
       "The virtual MAC address used to represent the QLLC-attached
        link station to the rest of the DLSw network."
    ::= { hpnicfdeQllcEntry 2 }

hpnicfQllcLocalSap  OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE(1))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
       "The SAP used to represent this link station."
    ::= { hpnicfdeQllcEntry 3 }

hpnicfQllcRemoteMac  OBJECT-TYPE
    SYNTAX      MacAddressNC
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
       "The MAC address to which DLSw should attempt to connect
        this link station. If this information is not available,
        a length of zero for this object should be returned."
    DEFVAL      { ''H }
    ::= { hpnicfdeQllcEntry 4 }

hpnicfQllcRemoteSap  OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE (0 | 1))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
       "The SAP of the remote station to which this link
        station should be connected. If this information
        is not available, a length of zero for this object
        should be returned."
    DEFVAL      { ''H }
    ::= { hpnicfdeQllcEntry 5 }

hpnicfQllcRowStatus  OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
       "RowStatus."
    ::= { hpnicfdeQllcEntry 6 }

-- ====================================================================
-- DLSw Extension SDLC Port Configuration Table
-- ====================================================================
hpnicfdeSdlcPortTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF HpnicfdeSdlcPortEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The table defines parameters for the interfaces
        whose link protocol is SDLC."
    ::= { hpnicfdeSdlc 1 }

hpnicfdeSdlcPortEntry OBJECT-TYPE
    SYNTAX      HpnicfdeSdlcPortEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Sdlc port entry."
    INDEX       { ifIndex }
    ::= { hpnicfdeSdlcPortTable 1 }


HpnicfdeSdlcPortEntry ::=
    SEQUENCE {
        hpnicfdeSdlcPortRole                INTEGER,
        hpnicfdeSdlcPortSendWindow          Integer32,
        hpnicfdeSdlcPortModulo              INTEGER,
        hpnicfdeSdlcPortMaxPdu              Integer32,
        hpnicfdeSdlcPortMaxSendQueue        Integer32,
        hpnicfdeSdlcPortMaxTransmission     Integer32,
        hpnicfdeSdlcPortSimultaneousEnable  INTEGER,
        hpnicfdeSdlcPortTimerACK            Integer32,
        hpnicfdeSdlcPortTimerLifeTime       Integer32,
        hpnicfdeSdlcPortTimerPollPause      Integer32,
        hpnicfdeSdlcPortRowStatus           RowStatus
    }

hpnicfdeSdlcPortRole OBJECT-TYPE
    SYNTAX      INTEGER
                {
                primary(1),
                seconday(2),
                norole(3)
                }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The SDLC role of interface."
    DEFVAL      { norole }
    ::= { hpnicfdeSdlcPortEntry 1 }

hpnicfdeSdlcPortSendWindow OBJECT-TYPE
    SYNTAX      Integer32 (1..7)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Size of local send window."
    DEFVAL      { 7 }
    ::= { hpnicfdeSdlcPortEntry 2 }

hpnicfdeSdlcPortModulo OBJECT-TYPE
    SYNTAX      INTEGER
                {
                m8(8),
                m128(128)
                }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Size of modulus."
    DEFVAL      { m8 }
    ::= { hpnicfdeSdlcPortEntry 3 }

hpnicfdeSdlcPortMaxPdu OBJECT-TYPE
    SYNTAX      Integer32 (1..17600)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Maximum bytes for incoming frames."
    DEFVAL      { 265 }
    ::= { hpnicfdeSdlcPortEntry 4 }

hpnicfdeSdlcPortMaxSendQueue OBJECT-TYPE
    SYNTAX      Integer32 (20..255)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Size of hold queue."
    DEFVAL      { 50 }
    ::= { hpnicfdeSdlcPortEntry 5 }

hpnicfdeSdlcPortMaxTransmission OBJECT-TYPE
    SYNTAX      Integer32 (1..255)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Number of times to retry an operation."
    DEFVAL      { 20 }
    ::= { hpnicfdeSdlcPortEntry 6 }

hpnicfdeSdlcPortSimultaneousEnable OBJECT-TYPE
    SYNTAX      INTEGER
                {
                enabled(1),
                disabled(2)
                }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Activate SDLC two-way simultaneous mode."
    DEFVAL      { 1 }
    ::= { hpnicfdeSdlcPortEntry 7 }

hpnicfdeSdlcPortTimerACK OBJECT-TYPE
    SYNTAX      Integer32 (1..60000)
    UNITS       "milliseconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Time to wait for a reply to a frame."
    DEFVAL      { 3000 }
    ::= { hpnicfdeSdlcPortEntry 8 }

hpnicfdeSdlcPortTimerLifeTime OBJECT-TYPE
    SYNTAX      Integer32 (1..60000)
    UNITS       "milliseconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Time to wait for a reply used by secondary station."
    DEFVAL      { 500 }
    ::= { hpnicfdeSdlcPortEntry 9 }

hpnicfdeSdlcPortTimerPollPause OBJECT-TYPE
    SYNTAX      Integer32 (1..10000)
    UNITS       "milliseconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Time between polls for each secondary SDLC station."
    DEFVAL      { 1000 }
    ::= { hpnicfdeSdlcPortEntry 10 }

hpnicfdeSdlcPortRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "RowStatus."
    ::= { hpnicfdeSdlcPortEntry 11 }

-- ====================================================================
-- DLSw Extension LLC2 Port Configuration Table
-- ====================================================================
hpnicfdeLlc2PortTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF HpnicfdeLlc2PortEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table defines parameters for the Ethernet interface."
    ::= { hpnicfdeLlc2 1 }

hpnicfdeLlc2PortEntry OBJECT-TYPE
    SYNTAX      HpnicfdeLlc2PortEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "LLC2 port entry."
    INDEX       { ifIndex }
    ::= { hpnicfdeLlc2PortTable 1 }

HpnicfdeLlc2PortEntry ::=
    SEQUENCE {
        hpnicfdeLlc2PortMaxAck           Integer32,
        hpnicfdeLlc2PortMaxPdu           Integer32,
        hpnicfdeLlc2PortMaxSendQueue     Integer32,
        hpnicfdeLlc2PortMaxTransmission  Integer32,
        hpnicfdeLlc2PortModulo           INTEGER,
        hpnicfdeLlc2PortReceiveWindow    Integer32,
        hpnicfdeLlc2PortTimerAck         Integer32,
        hpnicfdeLlc2PortTimerAckDelay    Integer32,
        hpnicfdeLlc2PortTimerDetect      Integer32,
        hpnicfdeLlc2PortTimerBusy        Integer32,
        hpnicfdeLlc2PortTimerPoll        Integer32,
        hpnicfdeLlc2PortTimerReject      Integer32,
        hpnicfdeLlc2PortRowStatus        RowStatus
    }

hpnicfdeLlc2PortMaxAck OBJECT-TYPE
    SYNTAX      Integer32 (1..127)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Maximum of I-frames received before ACK."
    DEFVAL      { 3 }
    ::= { hpnicfdeLlc2PortEntry 1 }

hpnicfdeLlc2PortMaxPdu OBJECT-TYPE
    SYNTAX      Integer32 (1..1700)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Maximum of LLC2 pdu length."
    DEFVAL      { 1493 }
    ::= { hpnicfdeLlc2PortEntry 2 }

hpnicfdeLlc2PortMaxSendQueue OBJECT-TYPE
    SYNTAX      Integer32 (20..200)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Queue for sending llc2 I-frames."
    DEFVAL      { 50 }
    ::= { hpnicfdeLlc2PortEntry 3 }

hpnicfdeLlc2PortMaxTransmission OBJECT-TYPE
    SYNTAX      Integer32 (1..255)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Retry times of operations."
    DEFVAL      { 20 }
    ::= { hpnicfdeLlc2PortEntry 4 }

hpnicfdeLlc2PortModulo OBJECT-TYPE
    SYNTAX      INTEGER
                {
                m8(8),
                m128(128)
                }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Modulus of LLC2."
    DEFVAL      { m128 }
    ::= { hpnicfdeLlc2PortEntry 5 }

hpnicfdeLlc2PortReceiveWindow OBJECT-TYPE
    SYNTAX      Integer32 (1..127)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Maximum number of I-frames to send before received ACK."
    DEFVAL      { 7 }
    ::= { hpnicfdeLlc2PortEntry 6 }

hpnicfdeLlc2PortTimerAck OBJECT-TYPE
    SYNTAX      Integer32 (1..60000)
    UNITS       "milliseconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Waiting for ACK time after sending an I-frame."
    DEFVAL      { 200 }
    ::= { hpnicfdeLlc2PortEntry 7 }

hpnicfdeLlc2PortTimerAckDelay OBJECT-TYPE
    SYNTAX      Integer32 (1..60000)
    UNITS       "milliseconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Maximum time allows I-frames incoming without replay ACK."
    DEFVAL      { 100 }
    ::= { hpnicfdeLlc2PortEntry 8 }

hpnicfdeLlc2PortTimerDetect OBJECT-TYPE
    SYNTAX      Integer32 (1..60000)
    UNITS       "milliseconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Detect the link status."
    DEFVAL      { 100 }
    ::= { hpnicfdeLlc2PortEntry 9 }

hpnicfdeLlc2PortTimerBusy OBJECT-TYPE
    SYNTAX      Integer32 (1..60000)
    UNITS       "milliseconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Waiting time while other LLC2 station is in busy state."
    DEFVAL      { 300 }
    ::= { hpnicfdeLlc2PortEntry 10 }

hpnicfdeLlc2PortTimerPoll OBJECT-TYPE
    SYNTAX      Integer32 (1..60000)
    UNITS       "milliseconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Waiting time after a P frame is sent."
    DEFVAL      { 5000 }
    ::= { hpnicfdeLlc2PortEntry 11 }

hpnicfdeLlc2PortTimerReject OBJECT-TYPE
    SYNTAX      Integer32 (1..60000)
    UNITS       "milliseconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Waiting time after a REJ frame is sent."
    DEFVAL      { 500 }
    ::= { hpnicfdeLlc2PortEntry 12 }

hpnicfdeLlc2PortRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "RowStatus."
    ::= { hpnicfdeLlc2PortEntry 13 }

-- ====================================================================
-- DLSw Reachable Cache MIB-Group
-- ====================================================================
hpnicfdeRchCacheStat OBJECT IDENTIFIER ::= { hpnicfdeReachableCache 1 }

hpnicfdeRchCacheMaxIndex OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Maximum of hpnicfdeRchCacheIndex."
    ::= { hpnicfdeRchCacheStat 1 }

hpnicfdeRchCacheNextIndex OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The next value of hpnicfdeRchCacheIndex to be assigned by
        the agent. A retrieval of this object atomically reserves
        the returned value for use by the manager to create a row
        in hpnicfdeRchCacheTable. This makes it possible for the agent
        to control the index space of the MAC address cache, yet
        allows the manager to administratively create new rows."
    ::= { hpnicfdeRchCacheStat 2 }

hpnicfdeRchCacheTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF HpnicfdeRchCacheEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Reachable cache table."
    ::= { hpnicfdeReachableCache 3 }

hpnicfdeRchCacheEntry OBJECT-TYPE
    SYNTAX      HpnicfdeRchCacheEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Reachable cache entry."
    INDEX       { hpnicfdeRchCacheIndex }
    ::= { hpnicfdeRchCacheTable 1 }

HpnicfdeRchCacheEntry ::=
    SEQUENCE {
        hpnicfdeRchCacheIndex            Integer32,
        hpnicfdeRchCacheStatus           INTEGER,
        hpnicfdeRchCacheRemainTime       TimeTicks,
        hpnicfdeRchCacheMac              MacAddressNC,
        hpnicfdeRchCacheRemoteIpAddrType InetAddressType,
        hpnicfdeRchCacheRemoteIp         InetAddress,
        hpnicfdeRchCacheRowStatus        RowStatus
    }

hpnicfdeRchCacheIndex OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Index of reachable cache entry."
    ::= { hpnicfdeRchCacheEntry 1 }

hpnicfdeRchCacheStatus OBJECT-TYPE
    SYNTAX      INTEGER
                {
                found(1),
                verify(2),
                noCacheInfo(3),
                exploring(4),
                waiting(5)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Current status of reachable cache entry."
    ::= { hpnicfdeRchCacheEntry 2 }

hpnicfdeRchCacheRemainTime OBJECT-TYPE
    SYNTAX      TimeTicks
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Remain time of reachable cache entry."
    ::= { hpnicfdeRchCacheEntry 3 }

hpnicfdeRchCacheMac OBJECT-TYPE
    SYNTAX      MacAddressNC
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "MAC address of reachable cache entry."
    ::= { hpnicfdeRchCacheEntry 4 }

hpnicfdeRchCacheRemoteIpAddrType OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Remote peer ip address type."
    ::= { hpnicfdeRchCacheEntry 5 }

hpnicfdeRchCacheRemoteIp OBJECT-TYPE
    SYNTAX      InetAddress
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Remote peer ip address of reachable cache entry."
    ::= { hpnicfdeRchCacheEntry 6 }

hpnicfdeRchCacheRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "RowStatus."
    ::= { hpnicfdeRchCacheEntry 7 }

-- ====================================================================
-- DLSw Ethernet Backup MIB-Group
-- ====================================================================
hpnicfdeEBMacMapStat OBJECT IDENTIFIER ::= { hpnicfdeEthernetBackup 1 }

hpnicfdeEBMacMapMaxIndex OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Maximum of hpnicfdeEBMacMapIndex."
    ::= { hpnicfdeEBMacMapStat 1 }

hpnicfdeEBMacMapNextIndex OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The next value of hpnicfdeEBMacMapIndex to be assigned by
        the agent. A retrieval of this object atomically reserves
        the returned value for use by the manager to create a row
        in hpnicfdeEBMacMapTable. This makes it possible for the agent
        to control the index space of the MAC mapping tables, yet
        allows the manager to administratively create new rows."
    ::= { hpnicfdeEBMacMapStat 2 }

hpnicfdeEBIfTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF HpnicfdeEBIfEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Information of interface which works for DLSw Ethernet redundancy."
    ::= { hpnicfdeEthernetBackup 3 }

hpnicfdeEBIfEntry OBJECT-TYPE
    SYNTAX      HpnicfdeEBIfEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Parameters defined for DLSw Ethernet redundancy interface."
    INDEX       { ifIndex }
    ::= { hpnicfdeEBIfTable 1 }

HpnicfdeEBIfEntry ::=
    SEQUENCE {
        hpnicfdeEBMulticastMac    MacAddressNC,
        hpnicfdeEBPriority        Integer32,
        hpnicfdeEBtimer           Integer32,
        hpnicfdeEBRowStatus       RowStatus
    }

hpnicfdeEBMulticastMac OBJECT-TYPE
    SYNTAX      MacAddressNC
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Multicast MAC address configured for the Ethernet
        redundancy of dlsw module. When Ethernet redundancy
        is inactive, its value is '000000000000'H.
        To active Ethernet redundancy, give it a valid multicast MAC address."
    DEFVAL      { '000000000000'h }
    ::= { hpnicfdeEBIfEntry 1 }

hpnicfdeEBPriority OBJECT-TYPE
    SYNTAX      Integer32 (1..254)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Priority configured for the Ethernet redundancy of DLSw module."
    DEFVAL      { 100 }
    ::= { hpnicfdeEBIfEntry 2 }

hpnicfdeEBtimer OBJECT-TYPE
    SYNTAX      Integer32 (100..5000)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Timer for the Ethernet redundancy of DLSw module."
    DEFVAL      { 500 }
    ::= { hpnicfdeEBIfEntry 3 }

hpnicfdeEBRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "RowStatus."
    ::= { hpnicfdeEBIfEntry 4 }

hpnicfdeEBMacMapTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF HpnicfdeEBMacMapEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "MAC address mapping table."
    ::= { hpnicfdeEthernetBackup 4 }

hpnicfdeEBMacMapEntry OBJECT-TYPE
    SYNTAX      HpnicfdeEBMacMapEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "MAC address mapping entry."
    INDEX       { ifIndex, hpnicfdeEBMacMapIndex }
    ::= { hpnicfdeEBMacMapTable 1 }

HpnicfdeEBMacMapEntry ::=
    SEQUENCE {
        hpnicfdeEBMacMapIndex         Integer32,
        hpnicfdeEBMacMapLocalMac      MacAddressNC,
        hpnicfdeEBMacMapRemoteMac     MacAddressNC,
        hpnicfdeEBMacMapNeighbour     MacAddressNC,
        hpnicfdeEBMacMapRowStatus     RowStatus
    }

hpnicfdeEBMacMapIndex OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Index of MAC address mapping entry."
    ::= { hpnicfdeEBMacMapEntry 1 }

hpnicfdeEBMacMapLocalMac OBJECT-TYPE
    SYNTAX      MacAddressNC
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Local MAC address in MAC address mapping.
        When creating a new conceptual row, hpnicfdeEBMacMapLocalMac
        and hpnicfdeEBMacMapRemoteMac should be set simultaneously."
    ::= { hpnicfdeEBMacMapEntry 2 }

hpnicfdeEBMacMapRemoteMac OBJECT-TYPE
    SYNTAX      MacAddressNC
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Remote MAC address of MAC address mapping.
        When creating a new conceptual row, hpnicfdeEBMacMapLocalMac
        and hpnicfdeEBMacMapRemoteMac should be set simultaneously."
    ::= { hpnicfdeEBMacMapEntry 3 }

hpnicfdeEBMacMapNeighbour OBJECT-TYPE
    SYNTAX      MacAddressNC
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Neighbour of MAC address mapping."
    ::= { hpnicfdeEBMacMapEntry 4 }

hpnicfdeEBMacMapRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Status of MAC address mapping entry."
    ::= { hpnicfdeEBMacMapEntry 5 }


END