--============================================================================== -- Copyright (c) 2010-2014 Hewlett-Packard Development Company, L.P. -- -- Description: PPP Over Sonet MIB -- Reference: -- Version: V1.5 -- History: -- V1.0 2004-10-28 created by fuzhenyu -- V1.1 2004-12-13 add notifications(9-13) under hpnicfPosMIBNotifications by fuzhenyu. -- V1.2 2005-04-12 add hpnicfPosFlagJ0Type, hpnicfPosFlagJ1Type in hpnicfPosParamTable by zhaotingqi. -- V1.3 2007-07-19 add hpnicfPosNormalAlarm in hpnicfPosMIBNotifications by chenfangchun -- V1.4 2010-05-19 modified by Tong Wei for TCA (Threshold Crossing Alarms) -- add hpnicfPosB1TCAThreshold, hpnicfPosB2TCAThreshold, hpnicfPosB3TCAThreshold, -- hpnicfPosB1TCAEnable, hpnicfPosB2TCAEnable and hpnicfPosB3TCAEnable -- in hpnicfPosParamTable -- add hpnicfPosB1TCAlarm, hpnicfPosB2TCAlarm and hpnicfPosB3TCAlarm -- in hpnicfPosMIBNotifications -- V1.5 2013-10-10 modify hpnicfPosEncapsulation and hpnicfPosMTU -- in hpnicfPosParamTable by chenzhouhui. --============================================================================== HPN-ICF-PPP-OVER-SONET-MIB DEFINITIONS ::= BEGIN IMPORTS ifIndex, ifDescr FROM IF-MIB Counter64, Integer32, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE FROM SNMPv2-SMI DisplayString, TruthValue FROM SNMPv2-TC hpnicfCommon FROM HPN-ICF-OID-MIB; hpnicfPos MODULE-IDENTITY LAST-UPDATED "201310101700Z" -- Oct 10, 2013 GMT ORGANIZATION "" CONTACT-INFO "" DESCRIPTION "This MIB manages POS(PPP Over Sonet)interfaces by providing an operational table which controls parameters of each POS interface and reports alarm conditions. " REVISION "201310101700Z" -- Oct 10, 2013 at 17:00 GMT DESCRIPTION "Update the version of this MIB module" REVISION "201005191700Z" -- May 19, 2010 at 17:00 GMT DESCRIPTION "Update the version of this MIB module" REVISION "200707191700Z" -- Jul 19, 2007 at 17:00 GMT DESCRIPTION "The initial version of this MIB module" ::= { hpnicfCommon 19 } hpnicfPosMIBObjects OBJECT IDENTIFIER ::= { hpnicfPos 1 } hpnicfPosParamTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfPosParamTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The pos parameter table." ::= { hpnicfPosMIBObjects 1 } hpnicfPosParamTableEntry OBJECT-TYPE SYNTAX HpnicfPosParamTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of pos table." INDEX { ifIndex } ::= { hpnicfPosParamTable 1 } HpnicfPosParamTableEntry ::= SEQUENCE { hpnicfPosCRC INTEGER, hpnicfPosMTU Integer32, hpnicfPosScramble TruthValue, hpnicfPosClockSource INTEGER, hpnicfPosSdhFlagJ0 DisplayString, hpnicfPosSdhFlagJ1 DisplayString, hpnicfPosSonetFlagJ0 Integer32, hpnicfPosSonetFlagJ1 DisplayString, hpnicfPosFlagC2 Integer32, hpnicfPosFrameType INTEGER, hpnicfPosBindVlanId Integer32, hpnicfPosEncapsulation INTEGER, hpnicfPoskeepaliveTimeout Integer32, hpnicfPosBERthresholdSF Integer32, hpnicfPosBERthresholdSD Integer32, hpnicfPosB1Error Counter64, hpnicfPosB2Error Counter64, hpnicfPosB3Error Counter64, hpnicfPosM1Error Counter64, hpnicfPosG1Error Counter64, hpnicfPosFlagJ0Type INTEGER, hpnicfPosFlagJ1Type INTEGER, hpnicfPosB1TCAThreshold Integer32, hpnicfPosB2TCAThreshold Integer32, hpnicfPosB3TCAThreshold Integer32, hpnicfPosB1TCAEnable INTEGER, hpnicfPosB2TCAEnable INTEGER, hpnicfPosB3TCAEnable INTEGER } hpnicfPosCRC OBJECT-TYPE SYNTAX INTEGER{crc32(1),crc16(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "The length of CRC" DEFVAL { crc32 } ::={ hpnicfPosParamTableEntry 1 } hpnicfPosMTU OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum Transfer Unit (MTU) of POS interface" ::={ hpnicfPosParamTableEntry 2 } hpnicfPosScramble OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Scrambling is used to avoid continuous 0 or 1 in signals. This object is to decide whether to scramble or not" DEFVAL { true } ::={ hpnicfPosParamTableEntry 3 } hpnicfPosClockSource OBJECT-TYPE SYNTAX INTEGER{system(1),line(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "The value indicates the source of clock signal. System indicates that clock signals are from device itself and line for clock signals from remote" DEFVAL { line } ::={ hpnicfPosParamTableEntry 4 } hpnicfPosSdhFlagJ0 OBJECT-TYPE SYNTAX DisplayString(SIZE(0..15)) MAX-ACCESS read-write STATUS current DESCRIPTION "The section trace byte. This node is used when the frame type is sdh." ::={ hpnicfPosParamTableEntry 5 } hpnicfPosSdhFlagJ1 OBJECT-TYPE SYNTAX DisplayString(SIZE(0..15)) MAX-ACCESS read-write STATUS current DESCRIPTION "The path trace byte. This node is used when the frame type is sdh." ::={ hpnicfPosParamTableEntry 6 } hpnicfPosSonetFlagJ0 OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The section trace byte. This node is used when the frame type is sonet." ::={ hpnicfPosParamTableEntry 7 } hpnicfPosSonetFlagJ1 OBJECT-TYPE SYNTAX DisplayString(SIZE(0..62)) MAX-ACCESS read-write STATUS current DESCRIPTION "The path trace byte. This node is used when the frame type is sonet." ::={ hpnicfPosParamTableEntry 8 } hpnicfPosFlagC2 OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The parameter for the channel signal value of C2 byte" DEFVAL { 22 } ::={ hpnicfPosParamTableEntry 9 } hpnicfPosFrameType OBJECT-TYPE SYNTAX INTEGER{sdh(1),sonet(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "The frame type that encapsulates the packet. Default frame type is sdh(Synchronous Digital Hierarchy) It also can be configured using sonet type(Synchronous Optical Network)." DEFVAL { sdh } ::={ hpnicfPosParamTableEntry 10 } hpnicfPosBindVlanId OBJECT-TYPE SYNTAX Integer32(0..4095) MAX-ACCESS read-write STATUS current DESCRIPTION "The vlan that this pos port binds. The vlan can not include any other port, otherwise error will be returned. If the vlan has a virtual interface, the status of virtual interface will be up or down according to the link status or this pos." ::={ hpnicfPosParamTableEntry 11 } hpnicfPosEncapsulation OBJECT-TYPE SYNTAX INTEGER{ppp(1),hdlc(2),fr(3)} MAX-ACCESS read-write STATUS current DESCRIPTION "The type of encapsulation " DEFVAL { ppp } ::={ hpnicfPosParamTableEntry 12 } hpnicfPoskeepaliveTimeout OBJECT-TYPE SYNTAX Integer32(0..32767) MAX-ACCESS read-write STATUS current DESCRIPTION "The keeplive of ppp, hdlc or fr. It is the query interval of link status. Two members of a link should have same keeplive. The default 0 prohibits detecting status of link." ::={ hpnicfPosParamTableEntry 13 } hpnicfPosBERthresholdSF OBJECT-TYPE SYNTAX Integer32(3..9) MAX-ACCESS read-write STATUS current DESCRIPTION "The bit-error rate threshold for Signal Fault. SF threshold should be greater than SD threshold." DEFVAL { 3 } ::={ hpnicfPosParamTableEntry 14 } hpnicfPosBERthresholdSD OBJECT-TYPE SYNTAX Integer32(3..9) MAX-ACCESS read-write STATUS current DESCRIPTION "The bit-error rate threshold for Signal Degrade. SD threshold should be less than SF threshold." DEFVAL { 6 } ::={ hpnicfPosParamTableEntry 15 } hpnicfPosB1Error OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter for SBIPE(Section Bit Interleave Parity Error)" ::={ hpnicfPosParamTableEntry 16 } hpnicfPosB2Error OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter for LBIPE(Line Bit Interleave Parity Error)" ::={ hpnicfPosParamTableEntry 17 } hpnicfPosB3Error OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter for PBIPE(Path Bit Interleave Parity Error)" ::={ hpnicfPosParamTableEntry 18 } hpnicfPosM1Error OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "How many times does LREI(Line Remote Error Indication) occur" ::={ hpnicfPosParamTableEntry 19 } hpnicfPosG1Error OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "How many times does PREI(Path Remote Error Indication) occur" ::={ hpnicfPosParamTableEntry 20 } hpnicfPosFlagJ0Type OBJECT-TYPE SYNTAX INTEGER{sdh(1),sonet(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "The frame type that encapsulates the flag J0. Default frame type is sdh(Synchronous Digital Hierarchy). It also can be configured using sonet(Synchronous Optical Network) type." DEFVAL { sdh } ::={ hpnicfPosParamTableEntry 21 } hpnicfPosFlagJ1Type OBJECT-TYPE SYNTAX INTEGER{sdh(1),sonet(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "The frame type that encapsulates the flag J1. Default frame type is sdh(Synchronous Digital Hierarchy). It also can be configured using sonet(Synchronous Optical Network) type." DEFVAL { sdh } ::={ hpnicfPosParamTableEntry 22 } hpnicfPosB1TCAThreshold OBJECT-TYPE SYNTAX Integer32 (3..9) MAX-ACCESS read-write STATUS current DESCRIPTION "Threshold for B1 TCA." DEFVAL { 6 } ::={ hpnicfPosParamTableEntry 23 } hpnicfPosB2TCAThreshold OBJECT-TYPE SYNTAX Integer32 (3..9) MAX-ACCESS read-write STATUS current DESCRIPTION "Threshold for B2 TCA." DEFVAL { 6 } ::={ hpnicfPosParamTableEntry 24 } hpnicfPosB3TCAThreshold OBJECT-TYPE SYNTAX Integer32 (3..9) MAX-ACCESS read-write STATUS current DESCRIPTION "Threshold for B3 TCA." DEFVAL { 6 } ::={ hpnicfPosParamTableEntry 25 } hpnicfPosB1TCAEnable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable traps of B1 TCA." DEFVAL { enable } ::={ hpnicfPosParamTableEntry 26 } hpnicfPosB2TCAEnable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable traps of B2 TCA." DEFVAL { enable } ::={ hpnicfPosParamTableEntry 27 } hpnicfPosB3TCAEnable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable traps of B3 TCA." DEFVAL { enable } ::={ hpnicfPosParamTableEntry 28 } hpnicfPosMIBNotificationsPrefix OBJECT IDENTIFIER ::= { hpnicfPos 2 } hpnicfPosMIBNotifications OBJECT IDENTIFIER ::= { hpnicfPosMIBNotificationsPrefix 0 } hpnicfPosLOSAlarm NOTIFICATION-TYPE OBJECTS { ifIndex } STATUS current DESCRIPTION "Alarm indicates loss of signal" ::={ hpnicfPosMIBNotifications 1 } hpnicfPosLOFAlarm NOTIFICATION-TYPE OBJECTS { ifIndex } STATUS current DESCRIPTION "Alarm indicates loss of frame" ::={ hpnicfPosMIBNotifications 2 } hpnicfPosOOFAlarm NOTIFICATION-TYPE OBJECTS { ifIndex } STATUS current DESCRIPTION "Alarm indicates out of frame" ::={ hpnicfPosMIBNotifications 3 } hpnicfPosLAISAlarm NOTIFICATION-TYPE OBJECTS { ifIndex } STATUS current DESCRIPTION "Alarm when LAIS(Line Alarm Indication Signal) arrives" ::={ hpnicfPosMIBNotifications 4 } hpnicfPosLRDIAlarm NOTIFICATION-TYPE OBJECTS { ifIndex } STATUS current DESCRIPTION "Alarm when LRDI(Line Remote Defect Indication) arrives" ::={ hpnicfPosMIBNotifications 5 } hpnicfPosPRDIAlarm NOTIFICATION-TYPE OBJECTS { ifIndex } STATUS current DESCRIPTION "Alarm when PRDI(Path Remote Defect Indication) arrives" ::={ hpnicfPosMIBNotifications 6 } hpnicfPosPAISAlarm NOTIFICATION-TYPE OBJECTS { ifIndex } STATUS current DESCRIPTION "Alarm when PAIS(Path Alarm Indication Signal) arrives" ::={ hpnicfPosMIBNotifications 7 } hpnicfPosLOPAlarm NOTIFICATION-TYPE OBJECTS { ifIndex } STATUS current DESCRIPTION "Alarm indicates loss of pointer" ::={ hpnicfPosMIBNotifications 8 } hpnicfPosSTIMAlarm NOTIFICATION-TYPE OBJECTS { ifIndex } STATUS current DESCRIPTION "Alarm indicates inconsistency between sent and received J0 bytes." ::={ hpnicfPosMIBNotifications 9 } hpnicfPosPTIMAlarm NOTIFICATION-TYPE OBJECTS { ifIndex } STATUS current DESCRIPTION "Alarm indicates inconsistency between sent and received J1 bytes." ::={ hpnicfPosMIBNotifications 10 } hpnicfPosPSLMAlarm NOTIFICATION-TYPE OBJECTS { ifIndex } STATUS current DESCRIPTION "Alarm indicates a mismatched C2 byte." ::={ hpnicfPosMIBNotifications 11 } hpnicfPosLSDAlarm NOTIFICATION-TYPE OBJECTS { ifIndex } STATUS current DESCRIPTION "Alarm indicates that the B2 bit-error rate exceeds SD threshold." ::={ hpnicfPosMIBNotifications 12 } hpnicfPosLSFAlarm NOTIFICATION-TYPE OBJECTS { ifIndex } STATUS current DESCRIPTION "Alarm indicates that the B2 bit-error rate exceeds SF threshold." ::={ hpnicfPosMIBNotifications 13 } hpnicfPosNormalAlarm NOTIFICATION-TYPE OBJECTS { ifIndex } STATUS current DESCRIPTION "Alarm indicates that the Pos interface state returns normal." ::={ hpnicfPosMIBNotifications 14 } hpnicfPosB1TCAlarm NOTIFICATION-TYPE OBJECTS { ifIndex, ifDescr } STATUS current DESCRIPTION "Threshold crossing alarms for B1." ::={ hpnicfPosMIBNotifications 15 } hpnicfPosB2TCAlarm NOTIFICATION-TYPE OBJECTS { ifIndex, ifDescr } STATUS current DESCRIPTION "Threshold crossing alarms for B2." ::={ hpnicfPosMIBNotifications 16 } hpnicfPosB3TCAlarm NOTIFICATION-TYPE OBJECTS { ifIndex, ifDescr } STATUS current DESCRIPTION "Threshold crossing alarms for B3." ::={ hpnicfPosMIBNotifications 17 } END