-- ==================================================================
-- Copyright (c) 2010-2013 Hewlett-Packard Development Company, L.P.
--
-- Description: MPLSOAM MIB
-- Reference:
-- Version: V1.0
-- History:
-- V1.0 2007-03-31 Created by Lixufu ID: 05023
-- ==================================================================
HPN-ICF-MPLSOAM-MIB DEFINITIONS ::= BEGIN

IMPORTS
        hpnicfCommon
    FROM HPN-ICF-OID-MIB
        IpAddress, Integer32, Unsigned32, OBJECT-TYPE, MODULE-IDENTITY, 
        NOTIFICATION-TYPE
    FROM SNMPv2-SMI
        TruthValue, RowStatus, TEXTUAL-CONVENTION
    FROM SNMPv2-TC;

hpnicfMplsOam MODULE-IDENTITY
    LAST-UPDATED "200703310000Z"                -- March 31, 2007 at 00:00 GMT
    ORGANIZATION
        ""
    CONTACT-INFO
        ""
    DESCRIPTION
        "This MIB contains objects to configure OAM module.
        The Operation, Administration and Maintenance (OAM)
        is an effective means for decreasing the cost of network maintenance.
        The MPLS OAM is used to administrate and maintain MPLS."
    ::= { hpnicfCommon 79 }

HpnicfMplsOAMDefectType ::=  TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "An indication of the OAM's defect type:
        1: dServer, server layer defect;
        2: dPeerMe, peer network maintenance entity defect;
        3: dLOCV, Loss of Connectivity Verification defect;
        4: dTTSIMismatch, Trail Termination Source Identifier Mismatch defect;
        5: dTTSIMismerge, Trail Termination Source Identifier Mismerge defect;
        6: dExcess, receiving excess rate of CV/FFD;
        7: dUnknown, unknown defect in the MPLS network..
        8: rlsn down;
        9: dLspDown;
        10: MPLS OAM ME;
        11: no defect."
    SYNTAX      INTEGER
        {
            dServer(1),
            dPeerMe(2),
            dLOCV(3),
            dTTSIMismatch(4),
            dTTSIMismerge(5),
            dExcess(6),
            dUnknown(7),
            dRlsnDown(8),
            dLspDown(9),
            dME(10),
            noDefect(11)
        }

HpnicfMplsOAMDetectFreq ::=  TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "An indication of the OAM's frequent type( ITU-T: Y.1711(0402) ):
        For CV: the frequency is static. The value is 1/s.
        For FFD: the frequency is set by user. The value
        can be 10ms, 20ms, 50ms, 100ms, 200ms, 500ms.
        Any other frequency is wrong.
        1: 10ms;
        2: 20ms;
        3: 50ms;
        4: 100ms;
        5: 200ms;
        6: 500ms;
        7: 1000ms(only for cv)."
    SYNTAX      INTEGER
        {
            ffd10ms(1),
            ffd20ms(2),
            ffd50ms(3),
            ffd100ms(4),
            ffd200ms(5),
            ffd500ms(6),
            cv1000ms(7)
        }

-- ==================================================================
--
-- ======================= definition begin =========================
--
-- ==================================================================
hpnicfMplsOamScalarGroup OBJECT IDENTIFIER ::= { hpnicfMplsOam 1 }

hpnicfMplsOamCapability OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Whether OAM is globally capable.
        false: incapable;
        true: capable;
        The default value is incapable."
    DEFVAL  { false }
    ::= { hpnicfMplsOamScalarGroup 1 }

hpnicfMplsOamTrapOpen OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Whether OAM trap is globally enabled.
        false: disable;
        true: enable;
        The default value is disable."
    DEFVAL  { false }
    ::= { hpnicfMplsOamScalarGroup 2 }

hpnicfMplsOamTable OBJECT IDENTIFIER ::= { hpnicfMplsOam 2 }

hpnicfMplsOamIgrTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF HpnicfMplsOamIgrEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table specifies per-LSP MPLS OAM ingress capability and
        associated information, such as IgrLspName and IgrDetType."
    ::= { hpnicfMplsOamTable 1 }

hpnicfMplsOamIgrEntry OBJECT-TYPE
    SYNTAX      HpnicfMplsOamIgrEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "An entry in this table is created by an LSR for every LSP
        capable of supporting MPLS OAM at ingress."
    INDEX
        {
            hpnicfMplsOamIgrIndex
        }
    ::= { hpnicfMplsOamIgrTable 1 }

HpnicfMplsOamIgrEntry ::= SEQUENCE
    {
        hpnicfMplsOamIgrIndex         Unsigned32,
        hpnicfMplsOamIgrLspName       OCTET STRING,
        hpnicfMplsOamIgrDetectType    INTEGER,
        hpnicfMplsOamIgrDetectFreq    HpnicfMplsOAMDetectFreq,
        hpnicfMplsOamIgrRevType       INTEGER,
        hpnicfMplsOamIgrRevLspName    OCTET STRING,
        hpnicfMplsOamIgrLspId         Integer32,
        hpnicfMplsOamIgrEnable        TruthValue,
        hpnicfMplsOamIgrDefectType    HpnicfMplsOAMDefectType,
        hpnicfMplsOamIgrRowStatus     RowStatus
    }

hpnicfMplsOamIgrIndex OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This is an unique index for an OAM ingress entry in the OAM table."
    ::= { hpnicfMplsOamIgrEntry 1 }

hpnicfMplsOamIgrLspName OBJECT-TYPE
    SYNTAX      OCTET STRING
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The name of an LSP.
        It means the LSP name of the detected LSP."
    ::= { hpnicfMplsOamIgrEntry 2 }

hpnicfMplsOamIgrDetectType OBJECT-TYPE
    SYNTAX      INTEGER
        {
            cv(1),
            ffd(2)
        }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "There are two types of OAM packets, CV and FFD.
        The CV flow is generated at the source LSR of the LSP with
        a nominal frequency of 1/s and terminated at the sink LSR of the LSP.
        FFD provides failure detection option for an LSP independent
        of the CV based availability model and is not tied to the
        CV insertion rate. Insertion rates at 1/s or faster may
        also be used.
        The CV/FFD packet contains a network-unique identifier (TTSI)
        so that all types of defects can be detected.
        1: CV;
        2: FFD."
    ::= { hpnicfMplsOamIgrEntry 3 }

hpnicfMplsOamIgrDetectFreq OBJECT-TYPE
    SYNTAX      HpnicfMplsOAMDetectFreq
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Indication of the OAM's frequent type."
    ::= { hpnicfMplsOamIgrEntry 4 }

hpnicfMplsOamIgrRevType OBJECT-TYPE
    SYNTAX      INTEGER
        {
            private(1),
            share(2)
        }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "When an LSP is found to be in defect, the sink LSR of the LSP
        should send BDI to inform the source LSR of the LSP, the BDI is
        transferred through the reverse LSP.
        The type of reverse LSP can be private or shared.
        If private, then the reverse LSP can be used only by the oam ingress;
        If shared, the reverse LSP which is shared between many forward
        LSPs, whose source LSRs are the same and sink LSRs are the same.
        1: private;
        2: share."
    ::= { hpnicfMplsOamIgrEntry 5 }

hpnicfMplsOamIgrRevLspName OBJECT-TYPE
    SYNTAX      OCTET STRING
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The object indicates the name of the reverse LSP."
    ::= { hpnicfMplsOamIgrEntry 6 }

hpnicfMplsOamIgrLspId OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "For ingress, the object indicates the lsp ID of
        the detected LSP."
    ::= { hpnicfMplsOamIgrEntry 7 }

hpnicfMplsOamIgrEnable OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Whether one LSP is OAM enable.
        If disable, LSP is not monitored;
        If enable, CV/FFD is generated at the source LSR of the LSP and
        checked at the sink LSR of the LSP, and user can set
        other configuration.
        false: The OAM function is disabled on the ingress;
        true: The OAM function is enabled on the ingress."
    DEFVAL  { false }
    ::= { hpnicfMplsOamIgrEntry 8 }

hpnicfMplsOamIgrDefectType OBJECT-TYPE
    SYNTAX      HpnicfMplsOAMDefectType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indication of the OAM's defect type."
    ::= { hpnicfMplsOamIgrEntry 9 }

hpnicfMplsOamIgrRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object is responsible for managing the creation,
        deletion and modification of rows, which support active
        status and CreatAndGo, destroy operation.
        To create a new row, hpnicfMplsOamIgrLspName, hpnicfMplsOamIgrDetectType,
        hpnicfMplsOamIgrDetectFreq, hpnicfMplsOamIgrRevType, hpnicfMplsOamIgrRevLspName,
        and hpnicfMplsOamIgrLspId must be specified."
    ::= { hpnicfMplsOamIgrEntry 10 }

hpnicfMplsOamEgrTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF HpnicfMplsOamEgrEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table specifies per-LSP MPLS OAM capability and
        associated information, such as DetectType, DetectFrequency."
    ::= { hpnicfMplsOamTable 2 }

hpnicfMplsOamEgrEntry OBJECT-TYPE
    SYNTAX      HpnicfMplsOamEgrEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "An entry in this table is created by an LSR for every LSP
        capable of supporting MPLS OAM at egress."
    INDEX
        {
            hpnicfMplsOamEgrIndex
        }
    ::= { hpnicfMplsOamEgrTable 1 }

HpnicfMplsOamEgrEntry ::= SEQUENCE
    {
        hpnicfMplsOamEgrIndex         Unsigned32,
        hpnicfMplsOamEgrLspName       OCTET STRING,
        hpnicfMplsOamEgrDetectType    INTEGER,
        hpnicfMplsOamEgrDetectFreq    HpnicfMplsOAMDetectFreq,
        hpnicfMplsOamEgrRevType       INTEGER,
        hpnicfMplsOamEgrRevLspName    OCTET STRING,
        hpnicfMplsOamEgrLsrId         IpAddress,
        hpnicfMplsOamEgrLspId         Integer32,
        hpnicfMplsOamEgrEnable        TruthValue,
        hpnicfMplsOamEgrDefectType    HpnicfMplsOAMDefectType,
        hpnicfMplsOamEgrRowStatus     RowStatus
    }

hpnicfMplsOamEgrIndex OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This is a unique index for an OAM egress entry in the OAM table."
    ::= { hpnicfMplsOamEgrEntry 1 }

hpnicfMplsOamEgrLspName OBJECT-TYPE
    SYNTAX      OCTET STRING
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The object indicates the name of static LSP at egress."
    ::= { hpnicfMplsOamEgrEntry 2 }

hpnicfMplsOamEgrDetectType OBJECT-TYPE
    SYNTAX      INTEGER
        {
            cv(1),
            ffd(2)
        }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "There are two types of OAM packets, CV and FFD.
        The CV flow is generated at the source LSR of the LSP with
        a nominal frequency of 1/s and terminated at the sink LSR of the LSP.
        FFD provides failure detection option for an LSP independent
        of the CV based availability model and is not tied to the
        CV insertion rate. Insertion rates at 1/s or faster may
        also be used.
        The CV/FFD packet contains a network-unique identifier (TTSI)
        so that all types of defects can be detected.
        1: CV;
        2: FFD."
    ::= { hpnicfMplsOamEgrEntry 3 }

hpnicfMplsOamEgrDetectFreq OBJECT-TYPE
    SYNTAX      HpnicfMplsOAMDetectFreq
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Indication of the OAM's frequent type."
    ::= { hpnicfMplsOamEgrEntry 4 }

hpnicfMplsOamEgrRevType OBJECT-TYPE
    SYNTAX      INTEGER
        {
            private(1),
            share(2)
        }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "When an LSP is found to be in defect, the sink LSR of the LSP
        should send BDI to inform the source LSR of the LSP, the BDI is
        transferred through the reverse LSP.
        The type of reverse LSP can be private or shared.
        If private, then the reverse LSP can be used only when the only
        LSP in defect;
        If shared, the reverse LSP, which is shared between many forward
        LSPs that have the same source LSRs and sink LSRs.
        1: private;
        2: share."
    ::= { hpnicfMplsOamEgrEntry 5 }

hpnicfMplsOamEgrRevLspName OBJECT-TYPE
    SYNTAX      OCTET STRING
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The object indicates the name of a reverse static-lsp."
    ::= { hpnicfMplsOamEgrEntry 6 }

hpnicfMplsOamEgrLsrId OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The object indicates the Ingress LSR ID of the LSP."
    ::= { hpnicfMplsOamEgrEntry 7 }

hpnicfMplsOamEgrLspId OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The object indicates the the Ingress session lsp ID of the
        detected static-LSP."
    ::= { hpnicfMplsOamEgrEntry 8 }

hpnicfMplsOamEgrEnable OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Whether one LSP is enabled with OAM.
        If disable, LSP is not monitored;
        If enable, CV/FFD is generated at the source LSR of the LSP and
        checked at the sink LSR of the LSP, and user can set
        other configuration.
        false: The OAM function is disabled on the egress;
        true: The OAM function is enabled on the egress."
    DEFVAL  { false }
    ::= { hpnicfMplsOamEgrEntry 9 }

hpnicfMplsOamEgrDefectType OBJECT-TYPE
    SYNTAX      HpnicfMplsOAMDefectType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indication of the OAM's defect type."
    ::= { hpnicfMplsOamEgrEntry 10 }

hpnicfMplsOamEgrRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object is responsible for managing the creation,
        deletion and modification of rows, which support active
        status and CreatAndGo, destroy operation.
        To create a new row, hpnicfMplsOamEgrLspName, hpnicfMplsOamEgrDetectType,
        hpnicfMplsOamEgrDetectFreq, hpnicfMplsOamEgrRevType, hpnicfMplsOamEgrRevLspName,
        hpnicfMplsOamEgrLsrId and hpnicfMplsOamEgrLspId must be specified."
    ::= { hpnicfMplsOamEgrEntry 11 }

hpnicfMplsOamNotifications OBJECT IDENTIFIER ::= { hpnicfMplsOam 3 }

hpnicfMplsOamIgrLSPOutDefect NOTIFICATION-TYPE
    OBJECTS
        {
            hpnicfMplsOamIgrLspName,
            hpnicfMplsOamIgrDefectType
        }
    STATUS      current
    DESCRIPTION
        "This notification is generated when the LSP is found
        out of the defect state at the LSP ingress."
    ::= { hpnicfMplsOamNotifications 1 }

hpnicfMplsOamIgrLSPInDefect NOTIFICATION-TYPE
    OBJECTS
        {
            hpnicfMplsOamIgrLspName,
            hpnicfMplsOamIgrDefectType
        }
    STATUS      current
    DESCRIPTION
        "This notification is generated when the LSP is found
        in the defect state at the LSP ingress."
    ::= { hpnicfMplsOamNotifications 2 }

hpnicfMplsOamEgrLSPOutDefect NOTIFICATION-TYPE
    OBJECTS
        {
            hpnicfMplsOamEgrLspName,
            hpnicfMplsOamEgrDefectType
        }
    STATUS      current
    DESCRIPTION
        "This notification is generated when the LSP is found
        out of the defect state at the LSP egress."
    ::= { hpnicfMplsOamNotifications 3 }

hpnicfMplsOamEgrLSPInDefect NOTIFICATION-TYPE
    OBJECTS
        {
            hpnicfMplsOamEgrLspName,
            hpnicfMplsOamEgrDefectType
        }
    STATUS      current
    DESCRIPTION
        "This notification is generated when the LSP is found
        in the defect state at the LSP egress."
    ::= { hpnicfMplsOamNotifications 4 }

END