-- =========================================================================================================== -- Copyright (c) 2010-2013 Hewlett-Packard Development Company, L.P. -- -- Description: Mdc MIB -- Reference: -- Version: V1.0 -- History: -- revision 1.0 2013-03-05 created by c08124 -- -- ============================================================================================================ HPN-ICF-MDC-MIB DEFINITIONS ::= BEGIN IMPORTS entPhysicalIndex FROM ENTITY-MIB hpnicfCommon FROM HPN-ICF-OID-MIB Integer32, Unsigned32, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE FROM SNMPv2-SMI DisplayString, RowStatus, TruthValue, TEXTUAL-CONVENTION FROM SNMPv2-TC; hpnicfMDC MODULE-IDENTITY LAST-UPDATED "201303051448Z" ORGANIZATION "" CONTACT-INFO "" DESCRIPTION "This MIB contains objects to manage MDC (Multitenant Device Context) operations. Such as: 1. Configure MDCs for a device and display MDCs and their status. 2. Assign CPU, storage space, and memory space resources to the MDC, and display their status. 3. Authorize the MDC to use the interface cards, and assign physical interfaces to an MDC. Default MDC: A device supporting MDCs is an MDC itself, and it is called the default MDC. From the default MDC, administrators can manage the entire physical device, create and delete non-default MDCs, and assign interfaces, CPU resources, storage space, and memory space to non-default MDCs. Non-default MDC: No MDCs can be created on a non-default MDC. Administrators of non-default MDCs can only manage and maintain their respective MDCs. A non-default MDC can use only the resources assigned to it." REVISION "201303051448Z" DESCRIPTION "The initial revision of this MIB module." ::= { hpnicfCommon 136 } -- Scalar MIB objects, which are considered as global variables -- Global Level Configuration HpnicfMdcActionValue ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "start: start the MDC stop: stop the MDC" SYNTAX INTEGER { start(1), stop(2) } HpnicfMdcRunStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Status of the MDC: inactive: The MDC is stopped or not started yet. starting: The device is executing the mdc start command to start the MDC. active: The MDC is operating properly. stopping: The device is executing the undo mdc start command to stop the MDC. updating: The device is executing the location command to authorize the MDC to use an interface card." SYNTAX INTEGER { inactive(1), starting(2), active(3), stopping(4), updating(5) } -- Node definitions hpnicfMDCScalarObjects OBJECT IDENTIFIER ::= { hpnicfMDC 1 } hpnicfMDCMaxMDCNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of MDCs which the system supported to create." ::= { hpnicfMDCScalarObjects 1 } hpnicfMDCCurrentMDCNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current number of MDCs which the system has created." ::= { hpnicfMDCScalarObjects 2 } hpnicfMDCTables OBJECT IDENTIFIER ::= { hpnicfMDC 2 } -- The operation and information for MDC. hpnicfMDCControl OBJECT IDENTIFIER ::= { hpnicfMDCTables 1 } hpnicfMDCControlTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfMDCControlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to configure MDCs for a device and show MDC's status." ::= { hpnicfMDCControl 1 } hpnicfMDCControlEntry OBJECT-TYPE SYNTAX HpnicfMDCControlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of the hpnicfMDCControlTable, every entry is corresponding with an MDC." INDEX { hpnicfMDCIndex } ::= { hpnicfMDCControlTable 1 } HpnicfMDCControlEntry ::= SEQUENCE { hpnicfMDCIndex Integer32, hpnicfMDCName DisplayString, hpnicfMDCAction HpnicfMdcActionValue, hpnicfMDCStatus HpnicfMdcRunStatus, hpnicfMDCRowStatus RowStatus } hpnicfMDCIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "MDC ID is used as MDCIndex, the value range of MDC ID depends on the device model. MDCIndex cannot be modified after creation." ::= { hpnicfMDCControlEntry 1 } hpnicfMDCName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..15)) MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the MDC name, a case-sensitive string of 1 to 15 characters. The MDC name cannot be modified after creation." ::= { hpnicfMDCControlEntry 2 } hpnicfMDCAction OBJECT-TYPE SYNTAX HpnicfMdcActionValue MAX-ACCESS read-write STATUS current DESCRIPTION "State of MDC action: start/stop. After an MDC is started, administrators of the MDC can log in to the MDC for MDC configuration and maintenance. Stopping an MDC interrupts all services on the MDC and logs out all users of the MDC. Non-default MDC cannot operate." DEFVAL { stop } ::= { hpnicfMDCControlEntry 3 } hpnicfMDCStatus OBJECT-TYPE SYNTAX HpnicfMdcRunStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Status of MDCs." ::= { hpnicfMDCControlEntry 4 } hpnicfMDCRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this table entry. Only support active, createAndGo and destroy." ::= { hpnicfMDCControlEntry 5 } hpnicfMDCResource OBJECT IDENTIFIER ::= { hpnicfMDCTables 2 } hpnicfMDCDISKResourceTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfMDCDISKResourceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is for disk resource management: Specify a disk space percentage for an MDC and display the disk space usage. Default: All MDCs share the disk space in the system, and an MDC can use all free disk space in the system. Non-default MDC can only query the disk space usage." ::= { hpnicfMDCResource 1 } hpnicfMDCDISKResourceEntry OBJECT-TYPE SYNTAX HpnicfMDCDISKResourceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of the hpnicfMDCDISKResourceTable, every entry is corresponding to disk resource of an MDC. Note that only entPhysicalIndex values that represent physical boards (i.e., associated entPhysicalClass value is 'module(9)') are permitted to exist in this table." INDEX { entPhysicalIndex, hpnicfMDCIndex, hpnicfMDCDISKResourceInstance } ::= { hpnicfMDCDISKResourceTable 1 } HpnicfMDCDISKResourceEntry ::= SEQUENCE { hpnicfMDCDISKResourceInstance Integer32, hpnicfMDCDISKResourceInstanceName DisplayString, hpnicfMDCDISKResourceMinLimit Integer32, hpnicfMDCDISKResourceMaxLimit Integer32, hpnicfMDCDISKResourceReserve Unsigned32, hpnicfMDCDISKResourceQuota Unsigned32, hpnicfMDCDISKResourceUsage Unsigned32, hpnicfMDCDISKResourceAvailable Unsigned32 } hpnicfMDCDISKResourceInstance OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Instance index of disk resource. Different instances for disk: Flash, CF cards." ::= { hpnicfMDCDISKResourceEntry 1 } hpnicfMDCDISKResourceInstanceName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "Instance name of disk resource. Such as: Flash, CF cards." ::= { hpnicfMDCDISKResourceEntry 2 } hpnicfMDCDISKResourceMinLimit OBJECT-TYPE SYNTAX Integer32 (0..100) UNITS "percent" MAX-ACCESS read-write STATUS current DESCRIPTION "Limit minimum (reserve resources, must be all 0)." ::= { hpnicfMDCDISKResourceEntry 3 } hpnicfMDCDISKResourceMaxLimit OBJECT-TYPE SYNTAX Integer32 (1..100) UNITS "percent" MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum of available resources of disk. Make sure the disk space amount assigned to an MDC is greater than the disk space amount the MDC is using. Non-default MDC cannot set" ::= { hpnicfMDCDISKResourceEntry 4 } hpnicfMDCDISKResourceReserve OBJECT-TYPE SYNTAX Unsigned32 UNITS "KB" MAX-ACCESS read-only STATUS current DESCRIPTION "The reserve limit resources of disk." ::= { hpnicfMDCDISKResourceEntry 5 } hpnicfMDCDISKResourceQuota OBJECT-TYPE SYNTAX Unsigned32 UNITS "KB" MAX-ACCESS read-only STATUS current DESCRIPTION "The total limit resources of disk according to hpnicfMDCDiskResourceMaxLimit." ::= { hpnicfMDCDISKResourceEntry 6 } hpnicfMDCDISKResourceUsage OBJECT-TYPE SYNTAX Unsigned32 UNITS "KB" MAX-ACCESS read-only STATUS current DESCRIPTION "Current usage of disk resources." ::= { hpnicfMDCDISKResourceEntry 7 } hpnicfMDCDISKResourceAvailable OBJECT-TYPE SYNTAX Unsigned32 UNITS "KB" MAX-ACCESS read-only STATUS current DESCRIPTION "Current available resources of disk." ::= { hpnicfMDCDISKResourceEntry 8 } hpnicfMDCMemoryResourceTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfMDCMemoryResourceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is for memory resource management: Specify a memory space percentage for an MDC and display the memory space usage. Default: All MDCs share the memory space in the system, and an MDC can use all free memory. Non-default MDC can only query resource message of memory." ::= { hpnicfMDCResource 2 } hpnicfMDCMemoryResourceEntry OBJECT-TYPE SYNTAX HpnicfMDCMemoryResourceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of the hpnicfMDCMemoryResourceTable, every entry is corresponding with memory resource of an MDC. Note that only entPhysicalIndex values that represent physical boards (i.e., associated entPhysicalClass value is 'module(9)') are permitted to exist in this table." INDEX { entPhysicalIndex, hpnicfMDCIndex } ::= { hpnicfMDCMemoryResourceTable 1 } HpnicfMDCMemoryResourceEntry ::= SEQUENCE { hpnicfMDCMemoryResourceMinLimit Integer32, hpnicfMDCMemoryResourceMaxLimit Integer32, hpnicfMDCMemoryResourceReserve Unsigned32, hpnicfMDCMemoryResourceQuota Unsigned32, hpnicfMDCMemoryResourceUsage Unsigned32, hpnicfMDCMemoryResourceAvailable Unsigned32 } hpnicfMDCMemoryResourceMinLimit OBJECT-TYPE SYNTAX Integer32 (0..100) UNITS "percent" MAX-ACCESS read-write STATUS current DESCRIPTION "Limit minimum(reserve resources, must be all 0). Non-default MDC cannot set." ::= { hpnicfMDCMemoryResourceEntry 1 } hpnicfMDCMemoryResourceMaxLimit OBJECT-TYPE SYNTAX Integer32 (1..100) UNITS "percent" MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum of available resources of memory, it specifies the ratio of the memory space that an MDC can use. Make sure this amount is sufficient for the MDC to operate properly. Non-default MDC cannot set." ::= { hpnicfMDCMemoryResourceEntry 2 } hpnicfMDCMemoryResourceReserve OBJECT-TYPE SYNTAX Unsigned32 UNITS "KB" MAX-ACCESS read-only STATUS current DESCRIPTION "The reserve limit resources of memory." ::= { hpnicfMDCMemoryResourceEntry 3 } hpnicfMDCMemoryResourceQuota OBJECT-TYPE SYNTAX Unsigned32 UNITS "KB" MAX-ACCESS read-only STATUS current DESCRIPTION "The total limit resources of memory." ::= { hpnicfMDCMemoryResourceEntry 4 } hpnicfMDCMemoryResourceUsage OBJECT-TYPE SYNTAX Unsigned32 UNITS "KB" MAX-ACCESS read-only STATUS current DESCRIPTION "Current usage of memory resources." ::= { hpnicfMDCMemoryResourceEntry 5 } hpnicfMDCMemoryResourceAvailable OBJECT-TYPE SYNTAX Unsigned32 UNITS "KB" MAX-ACCESS read-only STATUS current DESCRIPTION "Current available value of memory resources." ::= { hpnicfMDCMemoryResourceEntry 6 } hpnicfMDCCPUResourceTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfMDCCPUResourceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is for CPU resource management: Specify a CPU weight for an MDC and display the CPU usage. The amount of CPU resources an MDC can use depends on the CPU weight settings for all MDCs that share the same CPU. Non-default MDC can only query CPU resources." ::= { hpnicfMDCResource 3 } hpnicfMDCCPUResourceEntry OBJECT-TYPE SYNTAX HpnicfMDCCPUResourceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of the hpnicfMDCCPUResourceTable, every entry is corresponding with CPU resources of an MDC. Note that only entPhysicalIndex values that represent physical boards (i.e., associated entPhysicalClass value is 'module(9)') are permitted to exist in this table." INDEX {entPhysicalIndex, hpnicfMDCIndex } ::= { hpnicfMDCCPUResourceTable 1 } HpnicfMDCCPUResourceEntry ::= SEQUENCE { hpnicfMDCCPUResourceLimit Integer32, hpnicfMDCCPUResourceUsage Integer32 } hpnicfMDCCPUResourceLimit OBJECT-TYPE SYNTAX Integer32 (1..10) UNITS "weight" MAX-ACCESS read-write STATUS current DESCRIPTION "CPU weight-maximum of available resources of CPU, this number specifies a CPU weight for an MDC. Non-default MDC cannot set." ::= { hpnicfMDCCPUResourceEntry 1 } hpnicfMDCCPUResourceUsage OBJECT-TYPE SYNTAX Integer32 (0..100) UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "the CPU usage" ::= { hpnicfMDCCPUResourceEntry 2 } -- The MDC location status. hpnicfMDCLocation OBJECT IDENTIFIER ::= { hpnicfMDCTables 3 } hpnicfMDCLocationTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfMDCLocationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is for location management: Authorize an MDC to use an interface card and query state of location. To assign physical interfaces to an MDC, administrators must authorize the MDC to use the interface cards to which the physical interfaces belong. Default: All interface cards of the device belong to the default MDC, and a non-default MDC cannot use any interface card. Non-default MDC can only query location state." ::= { hpnicfMDCLocation 1 } hpnicfMDCLocationEntry OBJECT-TYPE SYNTAX HpnicfMDCLocationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of the hpnicfMDCLocationTable, every entry is the status whether an MDC has been Authorized to use the interface cards. Note that only entPhysicalIndex values that represent physical boards (i.e., associated entPhysicalClass value is 'module(9)') are permitted to exist in this table." INDEX { entPhysicalIndex, hpnicfMDCIndex } ::= { hpnicfMDCLocationTable 1 } HpnicfMDCLocationEntry ::= SEQUENCE { hpnicfMDCLocationStatus TruthValue } hpnicfMDCLocationStatus OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "To authorize the MDC to use the interface cards, set the value of this object to 'true (1)'. To cancel the authorization, set this value to 'false (2)'. Note that the return noError means the command is being executed. For the execution result, check hpnicfMDCLocationStatus." ::= { hpnicfMDCLocationEntry 1 } -- The interfaces allocate information. hpnicfMDCAllocate OBJECT IDENTIFIER ::= { hpnicfMDCTables 4 } hpnicfMDCGroupIfTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfMDCGroupIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table indication of relation between interfaces and groups, which helps to realize the allocation, together with hpnicfMDCAllocateTable. Non-default MDC cannot operate." ::= { hpnicfMDCAllocate 1 } hpnicfMDCGroupIfEntry OBJECT-TYPE SYNTAX HpnicfMDCGroupIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of the hpnicfMDCGroupIfTable, every entry is the relationship between interfaces and groups. Due to hardware restrictions, the interfaces on some interface cards are grouped. The interfaces in a group must be assigned to the same MDC at the same time or removed from an MDC at the same time. Interface grouping depends on the device model. This table is used for hpnicfMDCAllocateTable to show interfae group lists. Note that only entPhysicalIndex values that represent physical ports (i.e., associated entPhysicalClass value is 'port(10)') are permitted to exist in this table." INDEX { entPhysicalIndex } ::= { hpnicfMDCGroupIfTable 1 } HpnicfMDCGroupIfEntry ::= SEQUENCE { hpnicfMDCGroupIdentity Integer32 } hpnicfMDCGroupIdentity OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The interface group ID. There are two parts for this id depicted as follows: 31 7 0 +++++++++++++++++++++++++++++++++++++++++ + entity index + group index + + ( bit 8..31 ) ( bit 0..7 ) + +++++++++++++++++++++++++++++++++++++++++ From bit0 to bit7 (one byte), it is interfaces group index. From bit8 to bit31 (three bytes), it is the physical index the same as the entPhysicalIndex specified in ENTITY-MIB. Note that only entPhysicalIndex values that represent physical boards (i.e., associated entPhysicalClass value is 'module(9)') are permitted to exist in this table." ::= { hpnicfMDCGroupIfEntry 2 } hpnicfMDCAllocateTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfMDCAllocateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to assigning a physical interface to an MDC. It is allowed that allocate interfaces to a non-default MDC from the default MDC, and allocate interfaces back to the default MDC from a non-default MDC. All physical interfaces on the device belong to the default MDC, and a non-default MDC has no physical interfaces to use. Multiple physical interfaces can be assigned to a non-default MDC. A physical interface must meet the following conditions to be assigned to a non-default MDC: 1. Belongs to the default MDC. 2. Not the console or AUX port. 3. Not the management Ethernet interface. 4. Not in an interface group with an interface assigned to another MDC. 5. The default MDC uses only the physical interfaces that are not assigned to a non-default MDC. Non-default MDC cannot set this table." ::= { hpnicfMDCAllocate 2 } hpnicfMDCAllocateEntry OBJECT-TYPE SYNTAX HpnicfMDCAllocateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of the hpnicfMDCAllocateTable, every entry is the status whether physical interfaces have been assigned to an MDC." INDEX { hpnicfMDCAllocateGroupIndex } ::= { hpnicfMDCAllocateTable 1 } HpnicfMDCAllocateEntry ::= SEQUENCE { hpnicfMDCAllocateGroupIndex Integer32, hpnicfMDCAllocateGroupDescription DisplayString, hpnicfMDCAllocateMDCId Integer32 } hpnicfMDCAllocateGroupIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The interface group ID, the same as hpnicfMDCGroupIdentity. There are two parts for this id. depicted as follows: 31 7 0 +++++++++++++++++++++++++++++++++++++++++ + entity index + group index + + ( bit 8..31 ) ( bit 0..7 ) + +++++++++++++++++++++++++++++++++++++++++ From bit0 to bit7 (one byte), it is interfaces group index. From bit8 to bit31 (three bytes), it is the physical index the same as the entPhysicalIndex specified in ENTITY-MIB. Note that only entPhysicalIndex values that represent physical boards (i.e., associated entPhysicalClass value is 'module(9)') are permitted to exist in this table." ::= { hpnicfMDCAllocateEntry 1 } hpnicfMDCAllocateGroupDescription OBJECT-TYPE SYNTAX DisplayString (SIZE (1..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "Interfaces list Such as: GigabitEthernet4/5/0/1 to GigabitEthernet4/5/0/24, GigabitEthernet4/5/0/48" ::= { hpnicfMDCAllocateEntry 2 } hpnicfMDCAllocateMDCId OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "MDC ID is used as hpnicfMDCAllocateMDCId. Default MDC: It is allowed that allocate interfaces to non-default MDC from the default MDC, and allocate interfaces back to the default MDC from a non-default MDC. Non-default MDC cannot set allocation, can only query grouping of own MDC." ::= { hpnicfMDCAllocateEntry 3 } hpnicfMDCNotification OBJECT IDENTIFIER ::= { hpnicfMDC 3 } hpnicfMDCNotificationObjects OBJECT IDENTIFIER ::= { hpnicfMDCNotification 0 } hpnicfMDCStateChangeToActive NOTIFICATION-TYPE OBJECTS {hpnicfMDCIndex, hpnicfMDCName} STATUS current DESCRIPTION "The hpnicfMDCStateChangeToActive trap indicates that the MDC status has changed to active." ::= { hpnicfMDCNotificationObjects 1 } hpnicfMDCStateChangeToInactive NOTIFICATION-TYPE OBJECTS {hpnicfMDCIndex, hpnicfMDCName} STATUS current DESCRIPTION "The hpnicfMDCStateChangeToInactive trap indicates that the MDC status has changed to inactive." ::= { hpnicfMDCNotificationObjects 2 } END