-- ================================================================== -- Copyright (c) 2010-2013 Hewlett-Packard Development Company, L.P. -- -- Description: Lan Switch VLAN MIB -- Reference: -- Version: V2.1 -- History: -- (1) Created by Zhangshilin, 2001.06.29 -- (2) Revised by Qi Zhenglin, 2002.01.08 -- V1.1 2004-09-08 modify STATUS of hpnicfLswVlanProtoObject from mandatory to current by gaolong. -- V1.2 2004-09-23 add ifEntry IMPORT clause by gaolong -- V1.3 2004-10-12 updated by gaolong -- Import TEXTUAL-CONVENTION and OBJECT-IDENTITY. -- Relocate hpnicfLswVlan MODULE-IDENTITY. -- Change MAX-ACCESS clause value of hpnicfVLANMibSwitchGarpStatClear to read-write. -- V1.4 2004-12-28 modified by jiaoyi -- Add hpnicfdot1qVlanMulticast in hpnicfdot1qVlanMIBTable -- 2005-01-22 update by wangyingxia -- Add all objects of hpnicfLswVlanMngObject from HPN-ICF-LswINF-MIB into this MIB -- Add TruthValue, RowStatus, TimeTicks, IpAddress, SnmpAdminString, VlanIndex, PortList -- Remove InterfaceIndex and import it from HPN-ICF-LswINF-MIB -- V1.5 2005-01-22 -- Add superVlan to hpnicfdot1qVlanType by sunqiang -- V1.6 2005-05-18 -- Add hpnicfDot1qVlanBatchMIBTable by lipei -- V1.7 2005-08-08 -- Add HpnicfVlanIndex and modified all VlanIndex to HpnicfVlanIndex by longyin -- V1.8 2006-02-14 -- Modify description of hpnicfVlanInterfaceID, hpnicfifIsolateSecondaryVlanlistLow -- and hpnicfifIsolateSecondaryVlanlistHigh by wangyong -- Adjust the format of the file by wangyong -- Add the object hpnicfdot1qVlanTaggedPorts, hpnicfdot1qVlanUntaggedPorts by jiliyan -- Add hpnicfifSuperVlanMappingTable, hpnicfifSuperVlanMappingEntry, hpnicfifSuperVlanID, -- hpnicfifSubVlanlistLow, hpnicfifSubVlanlistHigh by hejunwei -- Add hpnicfdot1qVlanBatchSetOperate, change the description of -- hpnicfDot1qVlanBatchMIBTable and hpnicfDot1qVlanBatchMIBEntry by hejunwei -- V1.9 2007-12-18 Add enmu 'vrrp' for hpnicfVlanInterfaceIpType by Zhangyinfei -- V2.0 2010-01-18 Add hpnicfdot1qVlanPortIndexs and hpnicfVlanInterfaceIfIndex by duyanbing -- V2.1 2012-06-11 Modify hpnicfVlanInterfaceIpAddr, hpnicfVlanInterfaceIpMask and hpnicfVlanInterfaceIpType by liuxibo -- 2012-08-13 -- Add hpnicfPrivateVlanMappingTable by chenkaiping -- Add primaryVlan for hpnicfdot1qVlanType by xiedong -- ================================================================== HPN-ICF-LswVLAN-MIB DEFINITIONS ::= BEGIN IMPORTS TimeInterval, TEXTUAL-CONVENTION, TruthValue, RowStatus FROM SNMPv2-TC MODULE-IDENTITY, OBJECT-TYPE, Counter32, Integer32, OBJECT-IDENTITY, TimeTicks, IpAddress FROM SNMPv2-SMI SnmpAdminString FROM SNMP-FRAMEWORK-MIB hpnicflswCommon FROM HPN-ICF-OID-MIB ifEntry FROM RFC1213-MIB hpnicfifVLANTrunkStatusEntry, PortList FROM HPN-ICF-LswINF-MIB; hpnicfLswVlan MODULE-IDENTITY LAST-UPDATED "200112261452Z" ORGANIZATION "" CONTACT-INFO "" DESCRIPTION "" ::= { hpnicflswCommon 2 } HpnicfVlanIndex ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A value used to index per-VLAN tables: values of 0 and 4095 are not permitted; if the value is between 1 and 4094 inclusive, it represents an IEEE 802.1Q VLAN-ID with global scope within a given bridged domain (see VlanId textual convention). If the value is greater than 4095 then it represents a VLAN with scope local to the particular agent, i.e. one without a global VLAN-ID assigned to it. Such VLANs are outside the scope of IEEE 802.1Q but it is convenient to be able to manage them in the same way using this MIB." SYNTAX Integer32(0..2147483647) -- ================================================================== -- -- ======================= definition begin ========================= -- -- ================================================================== hpnicfLswVlanMngObject OBJECT-IDENTITY STATUS current DESCRIPTION "Description." ::= { hpnicfLswVlan 1 } hpnicfdot1qVlanMIBTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfDot1qVlanMIBEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "VLAN MIB table" ::= { hpnicfLswVlanMngObject 1 } hpnicfdot1qVlanMIBEntry OBJECT-TYPE SYNTAX HpnicfDot1qVlanMIBEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entries of VLAN MIB table" INDEX { hpnicfdot1qVlanIndex } ::= { hpnicfdot1qVlanMIBTable 1} HpnicfDot1qVlanMIBEntry ::= SEQUENCE { hpnicfdot1qVlanIndex HpnicfVlanIndex, hpnicfdot1qVlanName SnmpAdminString, hpnicfdot1qVlanPorts PortList, hpnicfdot1qVlanType INTEGER, hpnicfdot1qVlanMacFilter TruthValue, hpnicfdot1qVlanMcastUnknownProtos TruthValue, hpnicfExistInterface TruthValue, hpnicfVlanInterfaceIndex INTEGER, hpnicfdot1qVlanMacLearn TruthValue, hpnicfdot1qVlanStatus INTEGER, hpnicfdot1qVlanCreationTime TimeTicks, hpnicfdot1qVlanPriority INTEGER, hpnicfdot1qVlanRowStatus RowStatus, hpnicfdot1qVlanBroadcastSuppression INTEGER, hpnicfdot1qVlanBcastSuppressionPPS INTEGER, hpnicfdot1qVlanMulticast INTEGER, hpnicfdot1qVlanTaggedPorts PortList, hpnicfdot1qVlanUntaggedPorts PortList, hpnicfdot1qVlanPortIndexs OCTET STRING } hpnicfdot1qVlanIndex OBJECT-TYPE SYNTAX HpnicfVlanIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The VLAN-ID." ::= { hpnicfdot1qVlanMIBEntry 1 } hpnicfdot1qVlanName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Name of the VLAN." ::= { hpnicfdot1qVlanMIBEntry 2 } hpnicfdot1qVlanPorts OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-write STATUS current DESCRIPTION "Port list of the VLAN." ::= { hpnicfdot1qVlanMIBEntry 3 } hpnicfdot1qVlanType OBJECT-TYPE SYNTAX INTEGER { superVlan (1), common-vlan (2), sub-vlan (3), isolate-user-vlan(4), secondary-vlan(5), primaryVlan(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "Vlan types: SuperVlan(1), Common vlan(2), and Sub-vlan(3)." ::= { hpnicfdot1qVlanMIBEntry 4 } hpnicfdot1qVlanMacFilter OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Whether to filter MAC addresses." ::= { hpnicfdot1qVlanMIBEntry 5 } hpnicfdot1qVlanMcastUnknownProtos OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Whether to broadcast the unknown packets." ::= { hpnicfdot1qVlanMIBEntry 6 } hpnicfExistInterface OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Whether there is virtual interface." ::= { hpnicfdot1qVlanMIBEntry 7 } hpnicfVlanInterfaceIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Whether vlan interface is configured on vlan. If vlan interface is configured, the value of the node is vlan id, else the value is 0." ::= { hpnicfdot1qVlanMIBEntry 8 } hpnicfdot1qVlanMacLearn OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "MAC address learning identity. (common vlan/Sub-vlan)" ::= { hpnicfdot1qVlanMIBEntry 9 } hpnicfdot1qVlanStatus OBJECT-TYPE SYNTAX INTEGER { other (1), static (2), dynamic (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Status of the VLAN." ::= { hpnicfdot1qVlanMIBEntry 10 } hpnicfdot1qVlanCreationTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The sysUPTime when the VLAN is created." ::= { hpnicfdot1qVlanMIBEntry 11 } hpnicfdot1qVlanPriority OBJECT-TYPE SYNTAX INTEGER (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Priority of the VLAN." DEFVAL {0} ::= { hpnicfdot1qVlanMIBEntry 12 } hpnicfdot1qVlanRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Operation status." ::= { hpnicfdot1qVlanMIBEntry 13 } hpnicfdot1qVlanBroadcastSuppression OBJECT-TYPE SYNTAX INTEGER (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "Whether broadcast suppression of vlan be supported pro rata. The vlaue of 100 indicates no broadcast suppression. If the function is not supported, this object cannot be written, and 100 will be returned when reading" DEFVAL { 100 } ::= { hpnicfdot1qVlanMIBEntry 14 } hpnicfdot1qVlanBcastSuppressionPPS OBJECT-TYPE SYNTAX INTEGER (0..148800) MAX-ACCESS read-write STATUS current DESCRIPTION "If the broadcast can be controlled with pps(packet per second)type, the value of 0 indicates no suppression. This node is conflicted with hpnicfdot1qVlanBroadcastSuppression. If the mode is set, hpnicfdot1qVlanBroadcastSuppression is unavailable. And vice versa." ::= { hpnicfdot1qVlanMIBEntry 15 } hpnicfdot1qVlanMulticast OBJECT-TYPE SYNTAX INTEGER { disable (0), enable (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Multicast vlan. The default value is disable(0)." ::= { hpnicfdot1qVlanMIBEntry 16 } hpnicfdot1qVlanTaggedPorts OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-only STATUS current DESCRIPTION "Tagged port list of the VLAN." ::= { hpnicfdot1qVlanMIBEntry 17 } hpnicfdot1qVlanUntaggedPorts OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-only STATUS current DESCRIPTION "Untagged port list of the VLAN." ::= { hpnicfdot1qVlanMIBEntry 18 } hpnicfdot1qVlanPortIndexs OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "PortIndex list of the VLAN, that delimited by comma, such as 1,3,4,7." ::= { hpnicfdot1qVlanMIBEntry 19 } hpnicfVlanInterfaceTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfVlanInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Virtual interface configuration table" ::= { hpnicfLswVlanMngObject 2} hpnicfVlanInterfaceEntry OBJECT-TYPE SYNTAX HpnicfVlanInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entries of virtual interface configuration table" INDEX { hpnicfVlanInterfaceID } ::= {hpnicfVlanInterfaceTable 1} HpnicfVlanInterfaceEntry ::= SEQUENCE { hpnicfVlanInterfaceID INTEGER, hpnicfdot1qVlanID HpnicfVlanIndex, hpnicfdot1qVlanIpAddress IpAddress, hpnicfdot1qVlanIpAddressMask IpAddress, hpnicfVlanInterfaceAdminStatus INTEGER, hpnicfVlanInterfaceFrameType INTEGER, hpnicfInterfaceRowStatus RowStatus, hpnicfVlanInterfaceIpMethod INTEGER, hpnicfVlanInterfaceIfIndex INTEGER } hpnicfVlanInterfaceID OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Index of the vlan interface table." ::= { hpnicfVlanInterfaceEntry 1 } hpnicfdot1qVlanID OBJECT-TYPE SYNTAX HpnicfVlanIndex MAX-ACCESS read-only STATUS current DESCRIPTION "VLAN-ID" ::= { hpnicfVlanInterfaceEntry 2 } hpnicfdot1qVlanIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "IP address of interface." ::= { hpnicfVlanInterfaceEntry 3 } hpnicfdot1qVlanIpAddressMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "IP address mask of interface." ::= { hpnicfVlanInterfaceEntry 4 } hpnicfVlanInterfaceAdminStatus OBJECT-TYPE SYNTAX INTEGER { up (1), down (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Status of VLAN virtual interfaces." ::= { hpnicfVlanInterfaceEntry 5 } hpnicfVlanInterfaceFrameType OBJECT-TYPE SYNTAX INTEGER { ethernet-ii (1), ethernet-snap (2), ethernet-8022 (3), ethernet-8023 (4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Frame type accepted by VLAN virtual interfaces." ::= { hpnicfVlanInterfaceEntry 6 } hpnicfInterfaceRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Operation status." ::= { hpnicfVlanInterfaceEntry 7 } hpnicfVlanInterfaceIpMethod OBJECT-TYPE SYNTAX INTEGER { assigned-ip (1), dhcp-ip (2), bootp-ip (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Vlan interface ip address acquiring method which is manual, dhcp or bootp." ::= { hpnicfVlanInterfaceEntry 8 } hpnicfVlanInterfaceIfIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "IfIndex of VLAN interface." ::= { hpnicfVlanInterfaceEntry 9 } hpnicfifIsolateMappingTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfifIsolateMappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Secondary vlan lists of Isolate-VLANs." ::= { hpnicfLswVlanMngObject 4 } hpnicfifIsolateMappingEntry OBJECT-TYPE SYNTAX HpnicfifIsolateMappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Secondary vlan lists of Isolate-VLANs." INDEX { hpnicfifIsolatePrimaryVlanID } ::= { hpnicfifIsolateMappingTable 1} HpnicfifIsolateMappingEntry ::= SEQUENCE { hpnicfifIsolatePrimaryVlanID HpnicfVlanIndex, hpnicfifIsolateSecondaryVlanlistLow OCTET STRING, hpnicfifIsolateSecondaryVlanlistHigh OCTET STRING } hpnicfifIsolatePrimaryVlanID OBJECT-TYPE SYNTAX HpnicfVlanIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Primary VLAN-ID." ::= { hpnicfifIsolateMappingEntry 1 } hpnicfifIsolateSecondaryVlanlistLow OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..256)) MAX-ACCESS read-write STATUS current DESCRIPTION "Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 1 through 8, the second octet specifying VLANs 9 through 16, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each secondary VLAN of the primary VLAN is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is secondary VLAN in the set of VLANs; the VLAN is not secondary VLAN if its bit has a value of '0'." ::= { hpnicfifIsolateMappingEntry 2 } hpnicfifIsolateSecondaryVlanlistHigh OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..256)) MAX-ACCESS read-write STATUS current DESCRIPTION "Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 2049 through 2056, the second octet specifying VLANs 2057 through 2064, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each secondary VLAN of the primary VLAN is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is secondary VLAN in the set of VLANs; the VLAN is not secondary VLAN if its bit has a value of '0'." ::= { hpnicfifIsolateMappingEntry 3 } hpnicfVlanInterfaceAddrTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfVlanInterfaceAddrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "VLAN interface IP address configuration table" ::= { hpnicfLswVlanMngObject 5 } hpnicfVlanInterfaceAddrEntry OBJECT-TYPE SYNTAX HpnicfVlanInterfaceAddrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entries of VLAN interface IP address configuration table" INDEX { hpnicfVlanInterfaceIpIfIndex, hpnicfVlanInterfaceIpAddr } ::= { hpnicfVlanInterfaceAddrTable 1 } HpnicfVlanInterfaceAddrEntry ::= SEQUENCE { hpnicfVlanInterfaceIpIfIndex INTEGER, hpnicfVlanInterfaceIpAddr IpAddress, hpnicfVlanInterfaceIpMask IpAddress, hpnicfVlanInterfaceIpType INTEGER, hpnicfVlanInterfaceIpRowStatus RowStatus } hpnicfVlanInterfaceIpIfIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Index of VLAN interfaces." ::= { hpnicfVlanInterfaceAddrEntry 1 } hpnicfVlanInterfaceIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "IP address of VLAN interface." ::= { hpnicfVlanInterfaceAddrEntry 2 } hpnicfVlanInterfaceIpMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "IP address mask of VLAN interface. When destory single IP address, you must set it correct to relative IP address." ::= { hpnicfVlanInterfaceAddrEntry 3 } hpnicfVlanInterfaceIpType OBJECT-TYPE SYNTAX INTEGER { primary (1), sub (2), cluster (3), vrrp (4) } MAX-ACCESS read-create STATUS current DESCRIPTION "IP address type." ::= { hpnicfVlanInterfaceAddrEntry 4 } hpnicfVlanInterfaceIpRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Operation status. active(1) will only be set when taking GET or GET NEXT operation. createAndGo(4) and destory(6) is valid when taking SET operation." ::= { hpnicfVlanInterfaceAddrEntry 5 } hpnicfDot1qVlanBatchMIBTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfDot1qVlanBatchMIBEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "VLAN batch configuration table. In the case of VLAN batch creation, hpnicfdot1qVlanBatchSetOperate should be set to 1. For example, if creating a row is for creating VLANs 2 to 4, the value of the objects should be set as follows: hpnicfdot1qVlanBatchStartIndex 2, hpnicfdot1qVlanBatchEndIndex 4, hpnicfdot1qVlanBatchSetOperate create(1), hpnicfdot1qVlanBatchRowStatus createAndGo(4). In the case of VLAN batch deletion, hpnicfdot1qVlanBatchSetOperate should be set to 2. For example, if creating a row is for deleting VLANs 10 to 20, the value of the objects should be set as follows: hpnicfdot1qVlanBatchStartIndex 10, hpnicfdot1qVlanBatchEndIndex 20, hpnicfdot1qVlanBatchSetOperate delete(2), hpnicfdot1qVlanBatchRowStatus createAndGo(4). When the action of batch VLANs deleting or creating is done, one row will be existent until it is deleted manually or ages out, but the VLANs of it won't disappear with the deletion of the row." ::= { hpnicfLswVlanMngObject 6 } hpnicfDot1qVlanBatchMIBEntry OBJECT-TYPE SYNTAX HpnicfDot1qVlanBatchMIBEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "VLAN batch configuration entry." INDEX { hpnicfdot1qVlanBatchOperIndex } ::= { hpnicfDot1qVlanBatchMIBTable 1} HpnicfDot1qVlanBatchMIBEntry ::= SEQUENCE { hpnicfdot1qVlanBatchOperIndex Integer32, hpnicfdot1qVlanBatchStartIndex HpnicfVlanIndex, hpnicfdot1qVlanBatchEndIndex HpnicfVlanIndex, hpnicfdot1qVlanBatchOperStatus INTEGER, hpnicfdot1qVlanBatchRowStatus RowStatus, hpnicfdot1qVlanBatchSetOperate INTEGER } hpnicfdot1qVlanBatchOperIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The consequence of operation." ::= { hpnicfDot1qVlanBatchMIBEntry 1 } hpnicfdot1qVlanBatchStartIndex OBJECT-TYPE SYNTAX HpnicfVlanIndex MAX-ACCESS read-write STATUS current DESCRIPTION "The value of start VLAN-ID." ::= { hpnicfDot1qVlanBatchMIBEntry 2 } hpnicfdot1qVlanBatchEndIndex OBJECT-TYPE SYNTAX HpnicfVlanIndex MAX-ACCESS read-write STATUS current DESCRIPTION "The value of end VLAN-ID." ::= { hpnicfDot1qVlanBatchMIBEntry 3 } hpnicfdot1qVlanBatchOperStatus OBJECT-TYPE SYNTAX INTEGER { opInprogress (1), -- If the operation is running, the system -- will return OpInprogress. opfailure (2), -- If the operation is failure, the system -- will return Opfailure. opsuccess (3), -- If the operation is success, the system -- will return Opsuccess. opsuccesspartial (4) -- If the operation is success partially, -- the system will return Opsuccesspartial. } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of operation." ::= { hpnicfDot1qVlanBatchMIBEntry 4 } hpnicfdot1qVlanBatchRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status of HpnicfDot1qVlanBatchMIBEntry." ::= { hpnicfDot1qVlanBatchMIBEntry 5 } hpnicfdot1qVlanBatchSetOperate OBJECT-TYPE SYNTAX INTEGER { create(1), delete(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "VLAN batch creation or deletion." ::= { hpnicfDot1qVlanBatchMIBEntry 6 } hpnicfifSuperVlanMappingTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfifSuperVlanMappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Sub VLAN lists of super-VLANs." ::= { hpnicfLswVlanMngObject 7 } hpnicfifSuperVlanMappingEntry OBJECT-TYPE SYNTAX HpnicfifSuperVlanMappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Sub VLAN lists of super-VLANs." INDEX { hpnicfifSuperVlanID } ::= { hpnicfifSuperVlanMappingTable 1} HpnicfifSuperVlanMappingEntry ::= SEQUENCE { hpnicfifSuperVlanID HpnicfVlanIndex, hpnicfifSubVlanlistLow OCTET STRING, hpnicfifSubVlanlistHigh OCTET STRING } hpnicfifSuperVlanID OBJECT-TYPE SYNTAX HpnicfVlanIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Super VLAN ID." ::= { hpnicfifSuperVlanMappingEntry 1 } hpnicfifSubVlanlistLow OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..256)) MAX-ACCESS read-write STATUS current DESCRIPTION "Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 1 through 8, the second octet specifying VLANs 9 through 16, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each sub VLAN of the super VLAN is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is a sub VLAN of the super VLAN; the VLAN is not a sub VLAN of the super VLAN if its bit has a value of '0'." ::= { hpnicfifSuperVlanMappingEntry 2 } hpnicfifSubVlanlistHigh OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..256)) MAX-ACCESS read-write STATUS current DESCRIPTION "Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 2049 through 2056, the second octet specifying VLANs 2057 through 2064, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each sub VLAN of the super VLAN is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is a sub VLAN of the super VLAN; the VLAN is not a sub VLAN of the super VLAN if its bit has a value of '0'." ::= { hpnicfifSuperVlanMappingEntry 3 } hpnicfPrivateVlanMappingTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfPrivateVlanMappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Secondary vlan lists of Primary-VLANs." ::= { hpnicfLswVlanMngObject 8 } hpnicfPrivateVlanMappingEntry OBJECT-TYPE SYNTAX HpnicfPrivateVlanMappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Secondary vlan lists of Primary-VLANs." INDEX { hpnicfPrimaryVlanID } ::= { hpnicfPrivateVlanMappingTable 1} HpnicfPrivateVlanMappingEntry ::= SEQUENCE { hpnicfPrimaryVlanID HpnicfVlanIndex, hpnicfSecondaryVlanlistLow OCTET STRING, hpnicfSecondaryVlanlistHigh OCTET STRING } hpnicfPrimaryVlanID OBJECT-TYPE SYNTAX HpnicfVlanIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Primary VLAN-ID." ::= { hpnicfPrivateVlanMappingEntry 1 } hpnicfSecondaryVlanlistLow OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..256)) MAX-ACCESS read-write STATUS current DESCRIPTION "Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 1 through 8, the second octet specifying VLANs 9 through 16, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each secondary VLAN of the primary VLAN is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is secondary VLAN in the set of VLANs; the VLAN is not secondary VLAN if its bit has a value of '0'." ::= { hpnicfPrivateVlanMappingEntry 2 } hpnicfSecondaryVlanlistHigh OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..256)) MAX-ACCESS read-write STATUS current DESCRIPTION "Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 2049 through 2056, the second octet specifying VLANs 2057 through 2064, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each secondary VLAN of the primary VLAN is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is secondary VLAN in the set of VLANs; the VLAN is not secondary VLAN if its bit has a value of '0'." ::= { hpnicfPrivateVlanMappingEntry 3 } hpnicfLswVlanProtoObject OBJECT-IDENTITY STATUS current DESCRIPTION "Description." ::= { hpnicfLswVlan 2 } hpnicfVLANMibGarpLeaveAllTime OBJECT-TYPE SYNTAX TimeInterval MAX-ACCESS read-write STATUS current DESCRIPTION "The GARP LeaveAll time, in centiseconds." DEFVAL { 1000 } ::= { hpnicfLswVlanProtoObject 14 } hpnicfvLANMibSwitchCountTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfVLANMibSwitchCountEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing the information various statistics of switch." ::= {hpnicfLswVlanProtoObject 15 } hpnicfvLANMibSwitchCountEntry OBJECT-TYPE SYNTAX HpnicfVLANMibSwitchCountEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing the information various statistics of switch." AUGMENTS {hpnicfifVLANTrunkStatusEntry } ::= {hpnicfvLANMibSwitchCountTable 1} HpnicfVLANMibSwitchCountEntry ::= SEQUENCE { hpnicfVLANMibSwitchGMRPRXPkt Counter32, hpnicfVLANMibSwitchGVRPRXPkt Counter32, hpnicfVLANMibSwitchGMRPTXPkt Counter32, hpnicfVLANMibSwitchGVRPTXPkt Counter32, hpnicfVLANMibSwitchDiscardedPkt Counter32, hpnicfVLANMibSwitchGarpStatClear INTEGER } hpnicfVLANMibSwitchGMRPRXPkt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of GMRP frames received." ::= { hpnicfvLANMibSwitchCountEntry 1 } hpnicfVLANMibSwitchGVRPRXPkt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of GVRP frames received." ::= { hpnicfvLANMibSwitchCountEntry 2 } hpnicfVLANMibSwitchGMRPTXPkt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of GMRP frames transmitted." ::= { hpnicfvLANMibSwitchCountEntry 3 } hpnicfVLANMibSwitchGVRPTXPkt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of GVRP frames transmitted." ::= { hpnicfvLANMibSwitchCountEntry 4 } hpnicfVLANMibSwitchDiscardedPkt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of discarded frames." ::= { hpnicfvLANMibSwitchCountEntry 5 } hpnicfVLANMibSwitchGarpStatClear OBJECT-TYPE SYNTAX INTEGER {clear(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Clear various Statistics viz. read operation not supported." ::= { hpnicfvLANMibSwitchCountEntry 6 } hpnicfvLANMibHoldTimeTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfVLANMibHoldTimeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table for setting/getting the Hold Time for a particular port." ::= {hpnicfLswVlanProtoObject 16 } hpnicfvLANMibHoldTimeEntry OBJECT-TYPE SYNTAX HpnicfVLANMibHoldTimeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table for setting/getting the HoldTime of the port." AUGMENTS { ifEntry } ::= {hpnicfvLANMibHoldTimeTable 1 } HpnicfVLANMibHoldTimeEntry ::= SEQUENCE { hpnicfVLANMibHoldTime INTEGER } hpnicfVLANMibHoldTime OBJECT-TYPE SYNTAX INTEGER (10..32765) MAX-ACCESS read-write STATUS current DESCRIPTION "HoldTime of the port." DEFVAL {10} ::= { hpnicfvLANMibHoldTimeEntry 1 } END