-- ================================================================== -- Copyright (c) 2010-2014 Hewlett-Packard Development Company, L.P. -- -- Description: Interface Management MIB -- Reference: -- Version: V3.6 -- History: -- V1.0 (1) Created by Zhangshilin, 2001.06.29 -- (2) Revised by Qizhenglin, 2002.01.08 -- V1.1 2004/7/20 Add PortList and VlanIndex define -- V1.2 2004/8/05 Add hpnicfifEthernetIsolate and hpnicfIsolateGroupMax -- by Chenshixing -- V1.3 2004/9/08 add fabric value to hpnicfifVLANType object and -- change the DESCRIPTION by chenshixing -- 2004/9/08 1.change the DESCRIPTION and the range of -- SYNTAX INTEGER from (5..100) to (1..100) -- in hpnicfifMcastControl object by wangyingxia -- 2.add the hpnicfifPpsMcastControl object -- by wangyingxia -- 3.change the status in hpnicfLswVlanMngObject -- to current by gaolong -- V1.4 2004-10-12 updated by gaolong -- Import TEXTUAL-CONVENTION, OBJECT-IDENTITY, Unsigned32. -- Relocate hpnicfLswL2InfMib MODULE-IDENTITY clause. -- Change SYNTAX clause type of VlanIndex from INTEGER to Unsigned32. -- Change MAX-ACCESS clause vlaue of hpnicfifClearStat and hpnicfifEthernetTest -- from write-only to read-write. -- Change value of hpnicfifAggregateModel, hpnicfdot1qVlanType, hpnicfVlanInterfaceFrameType -- and hpnicfifEthernetMdi from underscores to hyphens. -- Change value of hpnicfifMacAddrLearnMode, beginning with lowercase. -- V1.5 2004-11-15 -- Add the object hpnicfdot1qVlanBcastSuppressionPPS by lihaijun -- Adjust the format of the description of hpnicfdot1qVlanBroadcastSuppression -- V1.6 2004-12-2 -- Add the object hpnicfGlobalBroadcastMaxPps by zhanggang -- Add the object hpnicfGlobalBroadcastMaxRatio by zhanggang -- Add hpnicfifVlanVPNStatus and hpnicfBpduTunnelStatus by caiqiang -- Add hpnicfVlanInterfaceIpMethod by wangchao -- V1.7 2005-01-22 -- Remove the content of hpnicfLswVlan from this MIB to HPN-ICF-LswVLAN-MIB -- Remove SnmpAdminString -- V1.8 2005-2-2 -- Add the object hpnicfifPpsBcastDisValControl by zhangjianwei -- V1.9 2005-03-08 -- Add hpnicfifUniSuppressionStep, hpnicfifPpsUniSuppressionMax, hpnicfifMulSuppressionStep, -- hpnicfifPpsMulSuppressionMax, hpnicfifUniSuppression, hpnicfifPpsUniSuppression, -- hpnicfifMulSuppression, hpnicfifPpsMulSuppression by wanghaisheng -- V2.0 2005-06-14 -- Add the object hpnicfifComboActivePort by majun and adjust format -- V2.1 2005-06-30 -- Add the object hpnicfifVlanVPNUplinkStatus, hpnicfifVlanVPNTPID, -- hpnicfVlanVPNTPIDMode and hpnicfVlanVPNTPID by hejunwei -- Add hpnicfifUnknownPacketDropMul, hpnicfifUnknownPacketDropUni by wangyupeng -- Add hpnicfifBMbpsMulSuppressionMax, hpnicfifBMbpsMulSuppression, -- hpnicfifBKbpsMulSuppressionMax, hpnicfifBKbpsMulSuppressionStep -- and hpnicfifBKbpsMulSuppression by lichunyan -- Update decription of MIB objects by gaolong -- V2.2 2005-09-05 -- Add the object hpnicfifIsolateGroupID, hpnicfifisUplinkPort, -- hpnicfPortIsolateGroupTable, hpnicfPortIsolateGroupEntry, -- hpnicfPortIsolateGroupIndex, hpnicfPortIsolateUplinkIfIndex, -- hpnicfPortIsolateGroupRowStatus by huzinan -- V2.3 2005-10-13 -- Add the object hpnicfPortIsolateGroupDescription by hejunwei -- V2.4 2005-11-15 -- Add the value 24000M to hpnicfifEthernetSpeed by wanglirong -- V2.5 2006-01-16 -- Add hpnicfMaxMacLearnRange by zhangyinfei -- Change the DESCRIPTION and the range of hpnicfMaxMacLearn by zhangyinfei -- V2.6 2006-01-03 -- Remove the value range from the definition of hpnicfifXXBasePortIndex -- by wangzhaoyan -- V2.7 2006-02-11 -- Modify description of hpnicfifXXBasePortIndex and hpnicfifXXDevPortIndex -- Modify description of hpnicfifHybridTaggedVlanListLow, hpnicfifHybridTaggedVlanListHigh, -- hpnicfifHybridUnTaggedVlanListLow and hpnicfifHybridUnTaggedVlanListHigh -- Modify some wrong format of the description -- V2.8 2006-03-14 -- Add hpnicfifEthernetAutoSpeedMask, hpnicfifEthernetAutoSpeed in -- hpnicfethernetTable and SpeedModeFlag definition by Jin Yongfeng. -- V2.9 2006-04-24 -- Remove value range of hpnicfifEthernetMTU by Chenxi. -- V3.0 2006-04-30 -- Add hpnicfifBMbpsUniSuppressionMax, hpnicfifBMbpsUniSuppression, -- hpnicfifBKbpsUniSuppressionMax, hpnicfifBKbpsUniSuppressionStep -- and hpnicfifBKbpsUniSuppression by lichunyan. -- V3.1 2006-09-27 -- hpnicfifComboActivePort is obsoleted in hpnicfifXXTable. -- hpnicfifComboPortTable is added for combo interface. -- hpnicfifComboActivePort is replaced with hpnicfifComboPortCurActive. -- V3.2 2009-04-11 -- Add hpnicfifOutPayloadOctets, hpnicfifInPayloadOctets, hpnicfifInErrorPktsRate, -- hpnicfifInPkts, hpnicfifInNormalPkts, hpnicfifOutPkts by lisong. -- V3.3 2011-11-08 -- Add the value s40000M and s100000M to SpeedModeFlag and -- hpnicfifEthernetSpeed by xiedong. -- V3.4 2012-09-29 -- Modify description of hpnicfifClearStat by xiedong. -- 2012-11-03 -- Add hpnicfifPktBufTable, hpnicfifPktBufEntry, hpnicfifPktBufFree, -- hpnicfifPktBufInit, hpnicfifPktBufMin, hpnicfifPktBufMiss by chenkaiping -- V3.5 2013-08-17 -- Add hpnicfifPortProtocolStatTable by yangxiaoren. -- V3.6 2014-02-08 -- Modify description of hpnicfifUniSuppression, hpnicfifMulSuppression and -- hpnicfifMcastControl, modify value list of hpnicfifMcastControl by huhonghui, -- for supporting value 0. -- ================================================================== -- ================================================================== -- -- Varibles and types be imported -- -- ================================================================== HPN-ICF-LswINF-MIB DEFINITIONS ::= BEGIN IMPORTS RowStatus, DisplayString, TruthValue, TEXTUAL-CONVENTION FROM SNMPv2-TC MODULE-IDENTITY, OBJECT-TYPE, Integer32, Counter64, Unsigned32 FROM SNMPv2-SMI ifIndex, InterfaceIndex FROM IF-MIB hpnicflswCommon FROM HPN-ICF-OID-MIB; hpnicfLswL2InfMib MODULE-IDENTITY LAST-UPDATED "200106290000Z" ORGANIZATION "" CONTACT-INFO "" DESCRIPTION "" REVISION "200106290000Z" DESCRIPTION "" ::= { hpnicflswCommon 5 } -- ============================================================= -- Textual Conventions -- ============================================================= PortList ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'." SYNTAX OCTET STRING VlanIndex ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A value used to index per-VLAN tables: values of 0 and 4095 are not permitted; if the value is between 1 and 4094 inclusive, it represents an IEEE 802.1Q VLAN-ID with global scope within a given bridged domain (see VlanId textual convention). If the value is greater than 4095 then it represents a VLAN with scope local to the particular agent, i.e. one without a global VLAN-ID assigned to it. Such VLANs are outside the scope of IEEE 802.1Q but it is convenient to be able to manage them in the same way using this MIB." SYNTAX Unsigned32 (0..4294967295) DropDirection ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Representing the direction of dropping packets, if applicable." SYNTAX INTEGER { disable (1), enableInbound (2), enableOutbound (3), enableBoth (4) } SpeedModeFlag ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Type of Negotiable Speed mode." SYNTAX BITS { s10M(0), -- 10M speed s100M(1), -- 100M speed s1000M(2), -- 1000M speed s10000M(3), -- 10000M speed s24000M(4), -- 24000M speed s40000M(5), -- 40000M speed s100000M(6) -- 100000M speed } -- ================================================================== -- -- ======================= definition begin ========================= -- -- ================================================================== hpnicfLswExtInterface OBJECT IDENTIFIER ::= { hpnicflswCommon 1 } hpnicfifXXTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfIfXXEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Extended interface information table." ::= { hpnicfLswExtInterface 1 } hpnicfifXXEntry OBJECT-TYPE SYNTAX HpnicfIfXXEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entries of extended interface information table." INDEX { ifIndex } ::= { hpnicfifXXTable 1} HpnicfIfXXEntry ::= SEQUENCE { hpnicfifUnBoundPort TruthValue , hpnicfifISPhyPort TruthValue , hpnicfifAggregatePort TruthValue , hpnicfifMirrorPort TruthValue , hpnicfifVLANType INTEGER , hpnicfifMcastControl INTEGER , hpnicfifFlowControl TruthValue , hpnicfifSrcMacControl TruthValue , hpnicfifClearStat INTEGER, hpnicfifXXBasePortIndex INTEGER, hpnicfifXXDevPortIndex INTEGER, hpnicfifPpsMcastControl Integer32, hpnicfifPpsBcastDisValControl INTEGER, hpnicfifUniSuppressionStep Integer32, hpnicfifPpsUniSuppressionMax Integer32, hpnicfifMulSuppressionStep Integer32, hpnicfifPpsMulSuppressionMax Integer32, hpnicfifUniSuppression Integer32, hpnicfifPpsUniSuppression Integer32, hpnicfifMulSuppression Integer32, hpnicfifPpsMulSuppression Integer32, hpnicfifComboActivePort INTEGER, hpnicfifBMbpsMulSuppressionMax Integer32, hpnicfifBMbpsMulSuppression Integer32, hpnicfifBKbpsMulSuppressionMax Integer32, hpnicfifBKbpsMulSuppressionStep Integer32, hpnicfifBKbpsMulSuppression Integer32, hpnicfifUnknownPacketDropMul DropDirection, hpnicfifUnknownPacketDropUni DropDirection, hpnicfifBMbpsUniSuppressionMax Integer32, hpnicfifBMbpsUniSuppression Integer32, hpnicfifBKbpsUniSuppressionMax Integer32, hpnicfifBKbpsUniSuppressionStep Integer32, hpnicfifBKbpsUniSuppression Integer32, hpnicfifOutPayloadOctets Counter64, hpnicfifInPayloadOctets Counter64, hpnicfifInErrorPktsRate Integer32, hpnicfifInPkts Counter64, hpnicfifInNormalPkts Counter64, hpnicfifOutPkts Counter64 } hpnicfifUnBoundPort OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Whether it is the unbound port. (true indicates that the port is the main port of the aggregation or the port does not participate in the aggregation.)" ::= { hpnicfifXXEntry 1 } hpnicfifISPhyPort OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Whether it is a physical interface." ::= { hpnicfifXXEntry 2 } hpnicfifAggregatePort OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Whether it is the aggregated port. (if the port participates in the aggregation, this value is true.)" ::= { hpnicfifXXEntry 3 } hpnicfifMirrorPort OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Whether it is a mirror port." ::= { hpnicfifXXEntry 4 } hpnicfifVLANType OBJECT-TYPE SYNTAX INTEGER { vLANTrunk (1), access (2), hybrid (3), fabric (4) } MAX-ACCESS read-write STATUS current DESCRIPTION "port vlan types. hybrid (3) port can carry multiple VLANs. If fabric function is supported, fabric(4) means the port is a fabric port." ::= { hpnicfifXXEntry 5 } hpnicfifMcastControl OBJECT-TYPE SYNTAX INTEGER (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "Broadcast storm suppression with the step length of 1, ranging from 0 to 100 percent. In some products the step is 5, ranging from 0 to 100." ::= { hpnicfifXXEntry 6 } hpnicfifFlowControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Flow control status." ::= { hpnicfifXXEntry 7 } hpnicfifSrcMacControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Whether to filter by source MAC address." ::= { hpnicfifXXEntry 8 } hpnicfifClearStat OBJECT-TYPE SYNTAX INTEGER { clear(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Clear specify port statistics. Operation read is not supported." ::= { hpnicfifXXEntry 9 } hpnicfifXXBasePortIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Index number of the port and the first port index of the device is 1." ::= { hpnicfifXXEntry 10 } hpnicfifXXDevPortIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Device index of the port." ::= { hpnicfifXXEntry 11 } hpnicfifPpsMcastControl OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The broadcast suppression with pps(packet per second) type. The max value is determined by the port type and product." ::= { hpnicfifXXEntry 12 } hpnicfifPpsBcastDisValControl OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Control the port's pps(packet per second) broadcast suppression. When the port is enabled, its pps broadcast suppression value is the global disperse value, and when disabled, it doesn't suppress broadcast." ::= { hpnicfifXXEntry 13 } hpnicfifUniSuppressionStep OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The step of unicast suppression in ratio mode." ::= { hpnicfifXXEntry 14 } hpnicfifPpsUniSuppressionMax OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The max pps(packet per second) value of unicast suppression in pps mode." ::= { hpnicfifXXEntry 15 } hpnicfifMulSuppressionStep OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The step of multicast suppression in ratio mode." ::= { hpnicfifXXEntry 16 } hpnicfifPpsMulSuppressionMax OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The max pps(packet per second) value of multicast suppression in pps mode." ::= { hpnicfifXXEntry 17 } hpnicfifUniSuppression OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The unicast suppression with the ranging from 0 to 100 percent in ratio mode. The step is determined by hpnicfifUniSuppressionStep." ::= { hpnicfifXXEntry 18 } hpnicfifPpsUniSuppression OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The unicast suppression in pps(packet per second) mode. The max value is determined by hpnicfifPpsUniSuppressionMax." ::= { hpnicfifXXEntry 19 } hpnicfifMulSuppression OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The multicast suppression with ranging from 0 to 100 percent in ratio mode. The step is determined by hpnicfifMulSuppressionStep." ::= { hpnicfifXXEntry 20 } hpnicfifPpsMulSuppression OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The multicast suppression in pps(packet per second) mode. The max pps value is determined by hpnicfifPpsMulSuppressionMax." ::= { hpnicfifXXEntry 21 } hpnicfifComboActivePort OBJECT-TYPE SYNTAX INTEGER { fiber (1), -- Optical port copper (2), -- Electrical port na (3) -- Not applicable } MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Active port on combo interface." ::= { hpnicfifXXEntry 22 } hpnicfifBMbpsMulSuppressionMax OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum value of the multicast suppression with bandwidth-based(Mbps) that a port can be configured." ::= { hpnicfifXXEntry 23 } hpnicfifBMbpsMulSuppression OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "With bandwidth-based multicast suppression, the bandwidth is measured in Mbps. The upper limit of the multicast suppession with bandwidth-based(Mbps) is the value of hpnicfifBMbpsMulSuppressionMax in the entry. The default value of hpnicfifBMbpsMulSuppression is the value of hpnicfifBMbpsMulSuppressionMax." ::= { hpnicfifXXEntry 24 } hpnicfifBKbpsMulSuppressionMax OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum value of the multicast suppression with bandwidth-based(Kbps) that a port can be configured." ::= { hpnicfifXXEntry 25 } hpnicfifBKbpsMulSuppressionStep OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The step of multicast suppression with bandwidth-based(Kbps)." ::= { hpnicfifXXEntry 26 } hpnicfifBKbpsMulSuppression OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "With bandwidth-based multicast suppression, the bandwidth is measured in Kbps. The upper limit of the multicast suppession with bandwidth-based(Kbps) is the value of hpnicfifBKbpsMulSuppressionMax in the entry. The value of hpnicfifBKbpsMulSuppression must be multiple of the value of hpnicfifBKbpsMulSuppressionStep. The default value of hpnicfifBKbpsMulSuppression is the value of hpnicfifBKbpsMulSuppressionMax." ::= { hpnicfifXXEntry 27 } hpnicfifUnknownPacketDropMul OBJECT-TYPE SYNTAX DropDirection MAX-ACCESS read-write STATUS current DESCRIPTION "Control the port's unknown-multicast packets drop. When inbound direction is enabled on this port, the port will drop unknown-multicast packets in inbound direction. When outbound direction is enabled on this port, the port will drop unknown-multicast packets in outbound direction. When both directions are enabled on this port, the port will drop unknown-multicast packets in both inbound and outbound directions." DEFVAL { disable } ::= { hpnicfifXXEntry 28 } hpnicfifUnknownPacketDropUni OBJECT-TYPE SYNTAX DropDirection MAX-ACCESS read-write STATUS current DESCRIPTION "Control the port's unknown-unicast packets drop. When inbound direction is enabled on this port, the port will drop unknown-unicast packets in inbound direction. When outbound direction is enabled on this port, the port will drop unknown-unicast packets in outbound direction. When both directions are enabled on this port, the port will drop unknown-unicast packets in both inbound and outbound directions." DEFVAL { disable } ::= { hpnicfifXXEntry 29 } hpnicfifBMbpsUniSuppressionMax OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The maximum value of the unicast suppression with bandwidth-based (Mbps) that a port can be configured." ::= { hpnicfifXXEntry 30 } hpnicfifBMbpsUniSuppression OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION " With bandwidth-based Unicast suppression, the bandwidth is measured in Mbps. The upper limit of the unicast suppession with bandwidth-based(Mbps) is the value of hpnicfifBMbpsUniSuppressionMax in the entry. The default value of hpnicfifBMbpsUniSuppression is the value of hpnicfifBMbpsUniSuppressionMax." ::= { hpnicfifXXEntry 31 } hpnicfifBKbpsUniSuppressionMax OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The maximum value of the unicast suppression with bandwidth-based (Kbps) that a port can be configured." ::= { hpnicfifXXEntry 32 } hpnicfifBKbpsUniSuppressionStep OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The step of unicast suppression with bandwidth-based(Kbps)." ::= { hpnicfifXXEntry 33 } hpnicfifBKbpsUniSuppression OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION " With bandwidth-based unicast suppression, the bandwidth is measured in Kbps. The upper limit of the unicast suppession with bandwidth-based(Kbps) is the value of hpnicfifBKbpsUniSuppressionMax in the entry. The value of hpnicfifBKbpsUniSuppression must be multiple of the value of hpnicfifBKbpsUniSuppressionStep. The default value of hpnicfifBKbpsUniSuppression is the value of hpnicfifBKbpsUniSuppressionMax." ::= { hpnicfifXXEntry 34 } hpnicfifOutPayloadOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " The actual output octets of the interface." ::= { hpnicfifXXEntry 35 } hpnicfifInPayloadOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " The actual input octets of the interface." ::= { hpnicfifXXEntry 36 } hpnicfifInErrorPktsRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The rate of inbound error packets on the interface." ::= { hpnicfifXXEntry 37 } hpnicfifInPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of packets received on the interface." ::= { hpnicfifXXEntry 38 } hpnicfifInNormalPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of normal packets received on the interface." ::= { hpnicfifXXEntry 39 } hpnicfifOutPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of packets sent on the interface." ::= { hpnicfifXXEntry 40 } hpnicfifAggregateTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfIfAggregateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Port aggregation information table." ::= { hpnicfLswExtInterface 2 } hpnicfifAggregateEntry OBJECT-TYPE SYNTAX HpnicfIfAggregateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Port aggregation information table." INDEX { hpnicfifAggregatePortIndex } ::= { hpnicfifAggregateTable 1} HpnicfIfAggregateEntry ::= SEQUENCE { hpnicfifAggregatePortIndex InterfaceIndex, hpnicfifAggregatePortName OCTET STRING, hpnicfifAggregatePortListPorts PortList, hpnicfifAggregateModel INTEGER, hpnicfifAggregateOperStatus RowStatus } hpnicfifAggregatePortIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Index number of the main aggregated port." ::= { hpnicfifAggregateEntry 1 } hpnicfifAggregatePortName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..40)) MAX-ACCESS read-write STATUS current DESCRIPTION "Aggregation group name." ::= { hpnicfifAggregateEntry 2 } hpnicfifAggregatePortListPorts OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-write STATUS current DESCRIPTION "Portlist of a aggregating." ::= { hpnicfifAggregateEntry 3 } hpnicfifAggregateModel OBJECT-TYPE SYNTAX INTEGER { ingress (1), both (2), round-robin (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Load sharing mode for the port aggregation." ::= { hpnicfifAggregateEntry 4 } hpnicfifAggregateOperStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Current operation status of the row." ::= { hpnicfifAggregateEntry 5 } -- ================================================================== hpnicfifHybridPortTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfifHybridPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Hybrid-port configuration table." ::= { hpnicfLswExtInterface 3 } hpnicfifHybridPortEntry OBJECT-TYPE SYNTAX HpnicfifHybridPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Hybrid-port configuration table." INDEX { hpnicfifHybridPortIndex } ::= { hpnicfifHybridPortTable 1} HpnicfifHybridPortEntry ::= SEQUENCE { hpnicfifHybridPortIndex INTEGER, hpnicfifHybridTaggedVlanListLow OCTET STRING, hpnicfifHybridTaggedVlanListHigh OCTET STRING, hpnicfifHybridUnTaggedVlanListLow OCTET STRING, hpnicfifHybridUnTaggedVlanListHigh OCTET STRING } hpnicfifHybridPortIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Index number of Hybrid-port." ::= { hpnicfifHybridPortEntry 1 } hpnicfifHybridTaggedVlanListLow OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-write STATUS current DESCRIPTION "Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 1 through 8, the second octet specifying VLANs 9 through 16, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each tagged VLAN of the hybrid port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is tagged in the set of VLANs; the VLAN is not tagged if its bit has a value of '0'." ::= { hpnicfifHybridPortEntry 2 } hpnicfifHybridTaggedVlanListHigh OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-write STATUS current DESCRIPTION "Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 2049 through 2056, the second octet specifying VLANs 2057 through 2064, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each tagged VLAN of the hybrid port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is tagged in the set of VLANs; the VLAN is not tagged if its bit has a value of '0'." ::= { hpnicfifHybridPortEntry 3 } hpnicfifHybridUnTaggedVlanListLow OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-write STATUS current DESCRIPTION "Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 1 through 8, the second octet specifying VLANs 9 through 16, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each untagged VLAN of the hybrid port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is untagged in the set of VLANs; the VLAN is not untagged if its bit has a value of '0'." ::= { hpnicfifHybridPortEntry 4 } hpnicfifHybridUnTaggedVlanListHigh OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-write STATUS current DESCRIPTION "Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 2049 through 2056, the second octet specifying VLANs 2057 through 2064, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each untagged VLAN of the hybrid port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is untagged in the set of VLANs; the VLAN is not untagged if its bit has a value of '0'." ::= { hpnicfifHybridPortEntry 5 } -- ==================== Combo port table ============================ hpnicfifComboPortTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfifComboPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Combo-port table." ::= { hpnicfLswExtInterface 4 } hpnicfifComboPortEntry OBJECT-TYPE SYNTAX HpnicfifComboPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of hpnicfifComboPortTable." INDEX { hpnicfifComboPortIndex } ::= { hpnicfifComboPortTable 1} HpnicfifComboPortEntry ::= SEQUENCE { hpnicfifComboPortIndex InterfaceIndex, hpnicfifComboPortCurActive INTEGER } hpnicfifComboPortIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The combo-port interface index. Its value is the same as the value of ifIndex in ifTable, but only includes indexes of the combo-port interfaces." ::= { hpnicfifComboPortEntry 1 } hpnicfifComboPortCurActive OBJECT-TYPE SYNTAX INTEGER { fiber (1), -- Optical port copper (2), -- Electrical port na (3) -- Not applicable } MAX-ACCESS read-write STATUS current DESCRIPTION "Current active interface of combo interfaces. The value 'fiber' means the interface with fiber connector of the pair of combo-port interfaces is active. The value 'copper' means the interface with copper connector of the pair is active. The value 'na' means not supported." ::= { hpnicfifComboPortEntry 2 } -- ======================pkt buf table=============================== hpnicfifPktBufTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfifPktBufEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Packet buffer table." ::= { hpnicfLswExtInterface 5 } hpnicfifPktBufEntry OBJECT-TYPE SYNTAX HpnicfifPktBufEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of hpnicfifPktBufTable." INDEX { ifIndex } ::= { hpnicfifPktBufTable 1} HpnicfifPktBufEntry ::= SEQUENCE { hpnicfifPktBufFree Integer32, hpnicfifPktBufInit Integer32, hpnicfifPktBufMin Integer32, hpnicfifPktBufMiss Counter64 } hpnicfifPktBufFree OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packet buffers available for the interface." ::= { hpnicfifPktBufEntry 1 } hpnicfifPktBufInit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packet buffers allocated when the interface was created." ::= { hpnicfifPktBufEntry 2 } hpnicfifPktBufMin OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The smallest number of packet buffers available for the interface." ::= { hpnicfifPktBufEntry 3 } hpnicfifPktBufMiss OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times that the interface failed to obtain a packet buffer. Failure to obtain a buffer indicates that buffers were busy." ::= { hpnicfifPktBufEntry 4 } -- ========================l2======================================== hpnicfLswL2InfMibObject OBJECT IDENTIFIER ::= { hpnicfLswL2InfMib 1 } hpnicfSlotPortMax OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Max ports of the slots." ::= { hpnicfLswL2InfMibObject 1 } hpnicfSwitchPortMax OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Max ports that this switch includes." ::= { hpnicfLswL2InfMibObject 2 } hpnicfifVLANTrunkStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfIfVLANTrunkStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Gvrp attributes on the VlanTrunk port." ::= { hpnicfLswL2InfMibObject 3 } hpnicfifVLANTrunkStatusEntry OBJECT-TYPE SYNTAX HpnicfIfVLANTrunkStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Gvrp attributes on the VlanTrunk port." INDEX { hpnicfifVLANTrunkIndex } ::= { hpnicfifVLANTrunkStatusTable 1} HpnicfIfVLANTrunkStatusEntry ::= SEQUENCE { hpnicfifVLANTrunkIndex InterfaceIndex, hpnicfifVLANTrunkGvrpRegistration INTEGER, hpnicfifVLANTrunkPassListLow OCTET STRING, hpnicfifVLANTrunkPassListHigh OCTET STRING, hpnicfifVLANTrunkAllowListLow OCTET STRING, hpnicfifVLANTrunkAllowListHigh OCTET STRING } hpnicfifVLANTrunkIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Index number of the VLANTrunk interface." ::= { hpnicfifVLANTrunkStatusEntry 1 } hpnicfifVLANTrunkGvrpRegistration OBJECT-TYPE SYNTAX INTEGER { normal (1), fixed (2), forbidden (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "GVRP registration information normal: This is the default configuration. Allow create, register and unregister vlans dynamiclly at this port. fixed: Aallow create and register vlan manually at this port. Prevent from unregistering vlans or registering known vlans of this port at another trunk port. forbidden: Unregister all vlans but vlan 1, forbid to create or register any other vlans at this port." ::= { hpnicfifVLANTrunkStatusEntry 2 } hpnicfifVLANTrunkPassListLow OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 1 through 8, the second octet specifying VLANs 9 through 16, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each actually passed VLAN of the trunk port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is actually passed in the set of VLANs; the VLAN is not actually passed if its bit has a value of '0'." ::= { hpnicfifVLANTrunkStatusEntry 4 } hpnicfifVLANTrunkPassListHigh OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 2049 through 2056, the second octet specifying VLANs 2057 through 2064, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each actually passed VLAN of the trunk port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is actually passed in the set of VLANs; the VLAN is not actually passed if its bit has a value of '0'." ::= { hpnicfifVLANTrunkStatusEntry 5 } hpnicfifVLANTrunkAllowListLow OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 1 through 8, the second octet specifying VLANs 9 through 16, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each allowed VLAN of the trunk port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is allowed in the set of VLANs; the VLAN is not allowed if its bit has a value of '0'." ::= { hpnicfifVLANTrunkStatusEntry 6 } hpnicfifVLANTrunkAllowListHigh OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 2049 through 2056, the second octet specifying VLANs 2057 through 2064, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each allowed VLAN of the trunk port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is allowed in the set of VLANs; the VLAN is not allowed if its bit has a value of '0'." ::= { hpnicfifVLANTrunkStatusEntry 7 } hpnicfethernetTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfEthernetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Ethernet port attribute table." ::= { hpnicfLswL2InfMibObject 4 } hpnicfethernetEntry OBJECT-TYPE SYNTAX HpnicfEthernetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entries of Ethernet port attribute table" INDEX { ifIndex } ::= { hpnicfethernetTable 1} HpnicfEthernetEntry ::= SEQUENCE { hpnicfifEthernetDuplex INTEGER, hpnicfifEthernetMTU INTEGER, hpnicfifEthernetSpeed INTEGER, hpnicfifEthernetMdi INTEGER, hpnicfMaxMacLearn INTEGER, hpnicfifMacAddressLearn INTEGER, hpnicfifEthernetTest INTEGER, hpnicfifMacAddrLearnMode INTEGER, hpnicfifEthernetFlowInterval INTEGER, hpnicfifEthernetIsolate OCTET STRING, hpnicfifVlanVPNStatus INTEGER, hpnicfifVlanVPNUplinkStatus INTEGER, hpnicfifVlanVPNTPID Integer32, hpnicfifIsolateGroupID Integer32, hpnicfifisUplinkPort INTEGER, hpnicfifEthernetAutoSpeedMask SpeedModeFlag, hpnicfifEthernetAutoSpeed SpeedModeFlag } hpnicfifEthernetDuplex OBJECT-TYPE SYNTAX INTEGER { full (1), half (2), auto (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Ethernet interface mode." ::= { hpnicfethernetEntry 3 } hpnicfifEthernetMTU OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "MTU on the Ethernet interface." ::= { hpnicfethernetEntry 4 } hpnicfifEthernetSpeed OBJECT-TYPE SYNTAX INTEGER { auto (0), s10M (10), s100M (100), s1000M (1000), s10000M (10000), s24000M (24000), s40000M (40000), s100000M (100000) } MAX-ACCESS read-write STATUS current DESCRIPTION "Ethernet interface speed." ::= { hpnicfethernetEntry 5 } hpnicfifEthernetMdi OBJECT-TYPE SYNTAX INTEGER { mdi-ii (1), mdi-x (2), mdi-auto (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Type of the line connected to the port. MDI-II (straight-through cable): 1 MDI-X (crossover cable): 2 MDI-AUTO (auto-sensing): 3" ::= { hpnicfethernetEntry 7 } hpnicfMaxMacLearn OBJECT-TYPE SYNTAX INTEGER(-1..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum number of MAC addresses that the port can learn. The value -1 means that the number of Mac addresses that the port can learn is unlimited." ::= { hpnicfethernetEntry 8 } hpnicfifMacAddressLearn OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates if the interface is allowed to learn mac address. eanbled(1) means the interface can learn mac address, otherwise disabled(2) can be set." ::= { hpnicfethernetEntry 9 } hpnicfifEthernetTest OBJECT-TYPE SYNTAX INTEGER { test(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Test this interface. The actual testing will be different according to products. Read operation not supported." ::= { hpnicfethernetEntry 10 } hpnicfifMacAddrLearnMode OBJECT-TYPE SYNTAX INTEGER { iVL(1), sVL(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Status indicates mac address learn mode of the interface. IVL(1) means independent VLAN learning. SVL means shared VLAN learning." ::= { hpnicfethernetEntry 11 } hpnicfifEthernetFlowInterval OBJECT-TYPE SYNTAX INTEGER (5..300) MAX-ACCESS read-write STATUS current DESCRIPTION "Set flow interval of the ethernet. The NMS should set value to integer which is a multiple of 5." ::= { hpnicfethernetEntry 12 } hpnicfifEthernetIsolate OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "Isolate group means that all ports in the same isolate group can not send and receive packets each other. Each octet within this value specifies a set of eight isolate groups, with the first octet specifying isolate groups 1 through 8, the second octet specifying isolate groups 9 through 16, etc. Within each octet, the leftmost bit is the first bit. the first bit represents the lowest numbered isolate group, and the last bit represents the highest numbered isolate group. one port can belong to more than one isolate group. Thus, each isolate group is represented by a single bit within the value of this object. If that bit has a value of '1', then that isolate group includes this port; the port is not included if its bit has a value of '0'. for example, the first octet is '10000100' means that the port is included in the isolate group 1 and isolate group 6." ::= { hpnicfethernetEntry 13 } hpnicfifVlanVPNStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Vlan VPN enable status." ::= { hpnicfethernetEntry 14 } hpnicfifVlanVPNUplinkStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Vlan VPN uplink status." ::= { hpnicfethernetEntry 15 } hpnicfifVlanVPNTPID OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Port based Vlan VPN TPID(Tag Protocol Indentifier), default value is 0x8100. Please refer to hpnicfVlanVPNTPIDMode to get more information." ::= { hpnicfethernetEntry 16 } hpnicfifIsolateGroupID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Isolate group identifier. Value zero means this interface does not belong to any isolate group." ::= { hpnicfethernetEntry 17 } hpnicfifisUplinkPort OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Ethernet uplink status, default value is 2." ::= { hpnicfethernetEntry 18 } hpnicfifEthernetAutoSpeedMask OBJECT-TYPE SYNTAX SpeedModeFlag MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies which kinds of speed mode can be negotiated. Each bit corresponds to a kind of speed mode. If the value of a bit is '1', it means the corresponding speed mode is negotiable on the port. Otherwise the negotiation for that kind of speed mode is not supported on this port. If there are several negotiable speed modes, all bits for them are '1'. For example, if the speed mode 's10M' and 's1000M' can be negotiable, the value of this object is 0xA0." ::= { hpnicfethernetEntry 19 } hpnicfifEthernetAutoSpeed OBJECT-TYPE SYNTAX SpeedModeFlag MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates which kinds of speed mode are negotiable on this port. Only when a bit of hpnicfifEthernetAutoSpeedMask is '1', the corresponding bit of this object can be set to '1', indicating the corresponding speed mode is negotiable. For example, if the value of hpnicfifEthernetAutoSpeedMask is 0xA0, which indicates speed mode 's10M' and 's1000M' are negotiable, the possible value of this object should be one of the four values (0x00, 0x20, 0x80 and 0xA0). If the value of hpnicfifEthernetSpeed is not 'auto', the value of this object is insignificant and should be ignored. The value length of this object should be as long as that of hpnicfifEthernetAutoSpeedMask." ::= { hpnicfethernetEntry 20 } hpnicfIsolateGroupMax OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Max isolate group that this device support, the value is zero means that the device does not support isolate group." ::= { hpnicfLswL2InfMibObject 5 } hpnicfGlobalBroadcastMaxPps OBJECT-TYPE SYNTAX INTEGER (0..14881000) MAX-ACCESS read-write STATUS current DESCRIPTION "The global max packets per second. When it is set, the value of BroadcastMaxPps in all ports will be changed to that setting." ::= { hpnicfLswL2InfMibObject 6 } hpnicfGlobalBroadcastMaxRatio OBJECT-TYPE SYNTAX INTEGER (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "The global max-ratio of broadcast from 0 to 100 percent. When it is set, the value of BroadcastMaxRatio in all ports will be changed to that setting." ::= { hpnicfLswL2InfMibObject 7 } hpnicfBpduTunnelStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Bpdu tunnel enable status." ::= { hpnicfLswL2InfMibObject 8 } hpnicfVlanVPNTPIDMode OBJECT-TYPE SYNTAX INTEGER { port-based(1), global(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Vlan VPN TPID mode. The value 'port-based' means VLAN VPN TPID value would be set based on port via hpnicfifVlanVPNTPID. In this situation, hpnicfVlanVPNTPID is meaningless and always return 0x8100. The value 'global' means VLAN VPN TPID value should be set globally via hpnicfVlanVPNTPID. In this situation, hpnicfifVlanVPNTPID in hpnicfethernetTable has the same value with hpnicfVlanVPNTPID." ::= { hpnicfLswL2InfMibObject 9 } hpnicfVlanVPNTPID OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Global Vlan VPN TPID(Tag Protocol Indentifier), default value is 0x8100." ::= { hpnicfLswL2InfMibObject 10 } hpnicfPortIsolateGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfPortIsolateGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Isolate Group attribute table." ::= { hpnicfLswL2InfMibObject 11 } hpnicfPortIsolateGroupEntry OBJECT-TYPE SYNTAX HpnicfPortIsolateGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of hpnicfPortIsolateGroupTable." INDEX { hpnicfPortIsolateGroupIndex } ::= { hpnicfPortIsolateGroupTable 1 } HpnicfPortIsolateGroupEntry ::= SEQUENCE { hpnicfPortIsolateGroupIndex Integer32, hpnicfPortIsolateUplinkIfIndex InterfaceIndex, hpnicfPortIsolateGroupRowStatus RowStatus, hpnicfPortIsolateGroupDescription DisplayString } hpnicfPortIsolateGroupIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Port isolate group identifier. The index of the hpnicfPortIsolateGroupTable. The value ranges from 1 to the limit of isolate group quantity." ::= { hpnicfPortIsolateGroupEntry 1 } hpnicfPortIsolateUplinkIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-create STATUS current DESCRIPTION "Index number of the uplink interface." ::= { hpnicfPortIsolateGroupEntry 2 } hpnicfPortIsolateGroupRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Current operation status of the row." ::= { hpnicfPortIsolateGroupEntry 3 } hpnicfPortIsolateGroupDescription OBJECT-TYPE SYNTAX DisplayString (SIZE(0..80)) MAX-ACCESS read-create STATUS current DESCRIPTION "Port isolate group description, default value is zero-length string." ::= { hpnicfPortIsolateGroupEntry 4 } hpnicfMaxMacLearnRange OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of MAC address that the port supports." ::= { hpnicfLswL2InfMibObject 12 } hpnicfifPortProtocolStatTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfifPortProtocolStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains objects of port statistics information based on IPv4 and IPv6 protocols." ::= { hpnicfLswL2InfMibObject 13 } hpnicfifPortProtocolStatEntry OBJECT-TYPE SYNTAX HpnicfifPortProtocolStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of hpnicfifPortProtocolStatTable." INDEX { ifIndex } ::= { hpnicfifPortProtocolStatTable 1 } HpnicfifPortProtocolStatEntry ::= SEQUENCE { hpnicfifIPv4InOctets Counter64, hpnicfifIPv4InUcastPkts Counter64, hpnicfifIPv4InMultiPkts Counter64, hpnicfifIPv4InBroadcastPkts Counter64, hpnicfifIPv4InDiscards Counter64, hpnicfifIPv4InErrors Counter64, hpnicfifIPv4OutOctets Counter64, hpnicfifIPv4OutUcastPkts Counter64, hpnicfifIPv4OutMultiPkts Counter64, hpnicfifIPv4OutBroadcastPkts Counter64, hpnicfifIPv4OutDiscards Counter64, hpnicfifIPv4OutErrors Counter64, hpnicfifIPv6InOctets Counter64, hpnicfifIPv6InUcastPkts Counter64, hpnicfifIPv6InMultiPkts Counter64, hpnicfifIPv6InAnycastPkts Counter64, hpnicfifIPv6InDiscards Counter64, hpnicfifIPv6InErrors Counter64, hpnicfifIPv6OutOctets Counter64, hpnicfifIPv6OutUcastPkts Counter64, hpnicfifIPv6OutMultiPkts Counter64, hpnicfifIPv6OutAnycastPkts Counter64, hpnicfifIPv6OutDiscards Counter64, hpnicfifIPv6OutErrors Counter64 } hpnicfifIPv4InOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of octets based on IPv4 received on the interface." ::= { hpnicfifPortProtocolStatEntry 1 } hpnicfifIPv4InUcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of unicast packets based on IPv4 received on the interface." ::= { hpnicfifPortProtocolStatEntry 2 } hpnicfifIPv4InMultiPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of multicast packets based on IPv4 received on the interface." ::= { hpnicfifPortProtocolStatEntry 3 } hpnicfifIPv4InBroadcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of broadcast packets based on IPv4 received on the interface." ::= { hpnicfifPortProtocolStatEntry 4 } hpnicfifIPv4InDiscards OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of discard packets based on IPv4 received on the interface." ::= { hpnicfifPortProtocolStatEntry 5 } hpnicfifIPv4InErrors OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of error packets based on IPv4 received on the interface." ::= { hpnicfifPortProtocolStatEntry 6 } hpnicfifIPv4OutOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of octets based on IPv4 transmitted out of the interface." ::= { hpnicfifPortProtocolStatEntry 7 } hpnicfifIPv4OutUcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of unicast packets based on IPv4 transmitted out of the interface." ::= { hpnicfifPortProtocolStatEntry 8 } hpnicfifIPv4OutMultiPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of multicast packets based on IPv4 transmitted out of the interface." ::= { hpnicfifPortProtocolStatEntry 9 } hpnicfifIPv4OutBroadcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of broadcast packets based on IPv4 transmitted out of the interface." ::= { hpnicfifPortProtocolStatEntry 10 } hpnicfifIPv4OutDiscards OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of discard packets based on IPv4 transmitted out of the interface." ::= { hpnicfifPortProtocolStatEntry 11 } hpnicfifIPv4OutErrors OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of error packets based on IPv4 transmitted out of the interface." ::= { hpnicfifPortProtocolStatEntry 12 } hpnicfifIPv6InOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of octets based on IPv6 received on the interface." ::= { hpnicfifPortProtocolStatEntry 13 } hpnicfifIPv6InUcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of unicast packets based on IPv6 received on the interface." ::= { hpnicfifPortProtocolStatEntry 14 } hpnicfifIPv6InMultiPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of multicast packets based on IPv6 received on the interface." ::= { hpnicfifPortProtocolStatEntry 15 } hpnicfifIPv6InAnycastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of anycast packets based on IPv6 received on the interface." ::= { hpnicfifPortProtocolStatEntry 16 } hpnicfifIPv6InDiscards OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of discard packets based on IPv6 received on the interface." ::= { hpnicfifPortProtocolStatEntry 17 } hpnicfifIPv6InErrors OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of error packets based on IPv6 received on the interface." ::= { hpnicfifPortProtocolStatEntry 18 } hpnicfifIPv6OutOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of octets based on IPv6 transmitted of the interface." ::= { hpnicfifPortProtocolStatEntry 19 } hpnicfifIPv6OutUcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of unicast packets based on IPv6 transmitted out of the interface." ::= { hpnicfifPortProtocolStatEntry 20 } hpnicfifIPv6OutMultiPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of multicast packets based on IPv6 transmitted out of the interface." ::= { hpnicfifPortProtocolStatEntry 21 } hpnicfifIPv6OutAnycastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of anycast packets based on IPv6 transmitted out of the interface." ::= { hpnicfifPortProtocolStatEntry 22 } hpnicfifIPv6OutDiscards OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of discard packets based on IPv6 transmitted out of the interface." ::= { hpnicfifPortProtocolStatEntry 23 } hpnicfifIPv6OutErrors OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of error packets based on IPv6 transmitted out of the interface." ::= { hpnicfifPortProtocolStatEntry 24 } END