-- ===========================================================================================================
-- Copyright (c) 2010-2014 Hewlett-Packard Development Company, L.P.
--
-- Description: ISSU MIB
-- Reference:
-- Version: V1.1
-- History:
--  Revision 1.0 2012-12-20 created by Wang Feng
--               2013-4-20 modified by Zhu Liuxing
--  Revision 1.1 2014-01-10 change hpnicfIssuUpgradeImageIndex and
--               hpnicfIssuUpgradeImageURL range by z03030
-- ============================================================================================================

HPN-ICF-ISSU-MIB DEFINITIONS ::= BEGIN

IMPORTS
    hpnicfCommon
        FROM HPN-ICF-OID-MIB
    Integer32, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE
        FROM SNMPv2-SMI
    DisplayString, RowStatus, TruthValue
        FROM SNMPv2-TC;

hpnicfIssuUpgrade MODULE-IDENTITY
    LAST-UPDATED "201301151536Z"        -- January 15, 2013 at 15:36 GMT
    ORGANIZATION
        ""
    CONTACT-INFO
        ""
    DESCRIPTION
        "This MIB provides objects for upgrading images on modules in the
        system, objects for showing the result of an upgrade operation,
        and objects for showing the result of a test operation.

        To perform an upgrade operation, a management application
        must first read the hpnicfIssuUpgradeImageTable table and use the
        information in other tables, as explained below.  You can
        configure a new image name for each image type as listed in
        hpnicfIssuUpgradeImageTable.  The system will use this image on the
        particular module at the next reboot.

        The management application used to perform an upgrade
        operation must first check if an upgrade operation is already
        in progress in the system.  This is done by reading the
        hpnicfIssuOpType ('none' indicates that
        no other upgrade operation is in progress.  Any other value
        indicates that an upgrade is already in progress and a new upgrade
        operation is not allowed.  To start an 'install' operation,
        the user must first perform a 'test' operation to examine the
        version compatibility between the given set of images
        and the running images.  Only if the result of the 'test'
        operation is 'success' can the user proceed to do an install
        operation.  The table hpnicfIssuTestResultTable
        provides the result of the 'test' operation performed by using hpnicfIssuOpType.
        The table hpnicfIssuUpgradeResultTable provides the result of the 'install' operation
        performed by using hpnicfIssuOpType.
        "
    REVISION "201301151536Z"        -- January 15, 2013 at 15:36 GMT
    DESCRIPTION
        "Initial version of this MIB module.
        Added hpnicfIssuUpgradeImageTable hpnicfIssuOp hpnicfIssuCompatibleResult
        hpnicfIssuTestResultTable hpnicfIssuUpgradeResultTable"
    ::= { hpnicfCommon 133 }

--
-- Node definitions
--

hpnicfIssuUpgradeMibObjects OBJECT IDENTIFIER ::= { hpnicfIssuUpgrade 1 }


hpnicfIssuUpgradeGroup OBJECT IDENTIFIER ::= { hpnicfIssuUpgradeMibObjects 1 }


hpnicfIssuUpgradeImageTable OBJECT-TYPE
    SYNTAX SEQUENCE OF HpnicfIssuUpgradeImageEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "A table listing the image variable types that
        exist in the device."
    ::= { hpnicfIssuUpgradeGroup 1 }


hpnicfIssuUpgradeImageEntry OBJECT-TYPE
    SYNTAX HpnicfIssuUpgradeImageEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "An hpnicfIssuUpgradeImageEntry entry.  Each entry provides an
        image variable type that exists in the device."
    INDEX { hpnicfIssuUpgradeImageIndex }
    ::= { hpnicfIssuUpgradeImageTable 1 }


HpnicfIssuUpgradeImageEntry ::=
    SEQUENCE {
        hpnicfIssuUpgradeImageIndex
            Integer32,
        hpnicfIssuUpgradeImageType
            INTEGER,
        hpnicfIssuUpgradeImageURL
            DisplayString,
        hpnicfIssuUpgradeImageRowStatus
            RowStatus
     }

hpnicfIssuUpgradeImageIndex OBJECT-TYPE
    SYNTAX Integer32 (1..2147483647)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Index of each image."
    ::= { hpnicfIssuUpgradeImageEntry 1 }


hpnicfIssuUpgradeImageType OBJECT-TYPE
    SYNTAX INTEGER
        {
        boot(1),
        system(2),
        feature(3),
        ipe(4)
        }
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "Types of images that the system can run.  The value of
        this object has four image variables names
        - 'boot', 'system', 'feature' and 'ipe'.  This table will then
        list these four strings as follows:

              hpnicfIssuUpgradeImageType
                  boot
                  system
                  feature
                  IPE

              The user can assign images (using hpnicfIssuUpgradeImageURL)
              to these variables and the system will use the assigned
              images to boot."
    ::= { hpnicfIssuUpgradeImageEntry 2 }


hpnicfIssuUpgradeImageURL OBJECT-TYPE
    SYNTAX DisplayString (SIZE (1..127))
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "This object contains the path of the image
        of this entity."
    ::= { hpnicfIssuUpgradeImageEntry 3 }


hpnicfIssuUpgradeImageRowStatus OBJECT-TYPE
    SYNTAX RowStatus
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "Row-status of image table."
    ::= { hpnicfIssuUpgradeImageEntry 4 }


hpnicfIssuOp OBJECT IDENTIFIER ::= { hpnicfIssuUpgradeGroup 2 }


hpnicfIssuOpType OBJECT-TYPE
    SYNTAX INTEGER
        {
        none(1),
        done(2),
        test(3),
        install(4),
        rollback(5)
        }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Command to be executed.
        The 'test' command must be performed before the 'install'
        command can be executed.  The 'install'
        command is allowed only if a read of
        this object returns 'test' and the value of object
        hpnicfIssuOpStatus is 'success'.

        Command                 Remarks

        none      If the user sets this object to 'none', the agent will return a success
                  without performing an upgrade operation.
        done      If this object returns any value other than
                  'none', setting this to 'done' will do
                  the required cleanup of the previous upgrade
                  operation and get the system ready for a new
                  upgrade operation.
        test      Check the version compatibility and upgrade method
                  for the given set of image files.
        install   For all the image entities listed in the
                  hpnicfIssuUpgradeImageTable, perform the required
                  upgrade operation listed in that table.
        rollback  Abort the current 'install' operation and roll back
                  to the previous version.
          "
    DEFVAL { none }
    ::= { hpnicfIssuOp 1 }


hpnicfIssuImageFileOverwrite OBJECT-TYPE
    SYNTAX TruthValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "If you want to overwrite the existing file, set the value of
        this object to enable.  Otherwise, set the value of this
        object to disable."
    DEFVAL { true }
    ::= { hpnicfIssuOp 2 }


hpnicfIssuOpTrapEnable OBJECT-TYPE
    SYNTAX TruthValue
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "If you want to enable the trap, set the value of
        this object to enable.  Otherwise, set the value of this
        object to disable."
    DEFVAL { true }
    ::= { hpnicfIssuOp 3 }


hpnicfIssuOpStatus OBJECT-TYPE
    SYNTAX INTEGER
        {
        none(1),
        failure(2),
        inProgress(3),
        success(4),
        rollbackInProgress(5),
        rollbackSuccess(6)
        }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Status of the specified operation.
        none                - No operation was performed.
        failure             - Specified operation has failed.
        inProgress          - Specified operation is in progress.
        success             - Specified operation completed successfully.
        rollbackInProgress     - Rollback operation is in progress.
        rollbackSuccess        - Rollback operation completed successfully.
          "
    DEFVAL { none }
    ::= { hpnicfIssuOp 4 }


hpnicfIssuFailedReason OBJECT-TYPE
    SYNTAX DisplayString (SIZE (0..255))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Indicates the the cause of 'failure' state
        of the object 'hpnicfIssuOpStatus'.
        This object would be a null string if the value of
        'hpnicfIssuOpStatus' is not 'failure'."
    ::= { hpnicfIssuOp 5 }


hpnicfIssuOpTimeCompleted OBJECT-TYPE
    SYNTAX DisplayString (SIZE (0..255))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Indicates the time when the upgrade operation was completed.
        This object would be a null string if hpnicfIssuOpType is
        'none'. "
    ::= { hpnicfIssuOp 6 }


hpnicfIssuLastOpType OBJECT-TYPE
    SYNTAX INTEGER
        {
        none(1),
        done(2),
        test(3),
        install(4),
        rollback(5)
        }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "This object indicates the previous hpnicfIssuOp value.
        It will be updated after a new hpnicfIssuOp is set and delivered
        to the upgrade process.

        Command                 Remarks

        none      If the user sets this object to 'none', agent will return a success
                  without performing an upgrade operation.
        done      If this object returns any value other than
                  'none', setting this to 'done' will do
                  the required cleanup of the previous upgrade
                  operation and get the system ready for a new
                  upgrade operation.
        test      Check the version compatibility and upgrade method
                  for the given set of image files.
        install   For all the image entities listed in the
                  hpnicfIssuUpgradeImageTable, perform the required
                  upgrade operation listed in that table.
        rollback  Abort the current install operation and roll back
                  to the previous version.
        "
    DEFVAL { none }
    ::= { hpnicfIssuOp 7 }


hpnicfIssuLastOpStatus OBJECT-TYPE
    SYNTAX INTEGER
        {
        none(1),
        failure(2),
        inProgress(3),
        success(4),
        rollbackInProgress(5),
        rollbackSuccess(6)
        }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "This object indicates previous hpnicfIssuOpStatus value.
        It will be updated after new hpnicfIssuOp is set and delivered
        to upgrade process.
        none                - No operation was performed.
        failure             - Specified operation has failed.
        inProgress          - Specified operation is active.
        success             - Specified operation completed successfully.
        rollbackInProgress     - Rollback operation is in progress.
        rollbackSuccess        - Rollback operation completed successfully.
        "
    DEFVAL { none }
    ::= { hpnicfIssuOp 8 }


hpnicfIssuLastOpFailedReason OBJECT-TYPE
    SYNTAX DisplayString (SIZE (0..255))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Indicates the cause of 'failure' state
        of the object 'hpnicfIssuOpStatus'.
        This object would be a null string if the value of
        'hpnicfIssuOpStatus' is not 'failure'.
        The value will be updated when new hpnicfIssuOp is set
        and delivered to the upgrade process."
    ::= { hpnicfIssuOp 9 }


hpnicfIssuLastOpTimeCompleted OBJECT-TYPE
    SYNTAX DisplayString (SIZE (0..255))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Indicates the previous hpnicfIssuOpTimeCompleted value.
        The value will be updated when new hpnicfIssuOp is set
        and delivered to the upgrade process."
    ::= { hpnicfIssuOp 10 }


hpnicfIssuUpgradeResultGroup OBJECT IDENTIFIER ::= { hpnicfIssuUpgradeMibObjects 2 }


hpnicfIssuCompatibleResult OBJECT IDENTIFIER ::= { hpnicfIssuUpgradeResultGroup 1 }


hpnicfIssuCompatibleResultStatus OBJECT-TYPE
    SYNTAX INTEGER
        {
        none(1),
        inCompatible(2),
        compatible(3),
        failure(4)
        }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Specifies whether the images provided in
        hpnicfIssuUpgradeImageTable are compatible with each other as
        far as this module is concerned.
        none            - No operation was performed.
        inCompatible    - The images provided are compatible
                          and can be run on this module.
        compatible      - The images provided are incompatible
                          and can be run on this module.
        failure         - Failed to get the compatibility.
        "
    DEFVAL { none }
    ::= { hpnicfIssuCompatibleResult 1 }


hpnicfIssuCompatibleResultFailedReason OBJECT-TYPE
    SYNTAX DisplayString (SIZE (0..255))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Indicates the cause of 'failure' state
        of the object 'hpnicfIssuCompatibleResultStatus'.
        This object would be a null string if the value of
        'hpnicfIssuCompatibleResultStatus' is not 'failure'."
    ::= { hpnicfIssuCompatibleResult 2 }


hpnicfIssuTestResultTable OBJECT-TYPE
    SYNTAX SEQUENCE OF HpnicfIssuTestResultEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Shows the result of the test operation, from which you can
        see the upgrade method."
    ::= { hpnicfIssuUpgradeResultGroup 2 }


hpnicfIssuTestResultEntry OBJECT-TYPE
    SYNTAX HpnicfIssuTestResultEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "An hpnicfIssuTestResultEntry entry.  Each entry provides the
        test result of a card in the device."
    INDEX { hpnicfIssuTestResultIndex }
    ::= { hpnicfIssuTestResultTable 1 }


HpnicfIssuTestResultEntry ::=
    SEQUENCE {
        hpnicfIssuTestResultIndex
            Integer32,
        hpnicfIssuTestDeviceChassisID
            Integer32,
        hpnicfIssuTestDeviceSlotID
            Integer32,
        hpnicfIssuTestDeviceCpuID
            Integer32,
        hpnicfIssuTestDeviceUpgradeWay
            INTEGER
     }

hpnicfIssuTestResultIndex OBJECT-TYPE
    SYNTAX Integer32 (1..65535)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Internal index, not accessible."
    ::= { hpnicfIssuTestResultEntry 1 }


hpnicfIssuTestDeviceChassisID OBJECT-TYPE
    SYNTAX Integer32 (0..255)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Chassis ID of the card."
    ::= { hpnicfIssuTestResultEntry 2 }


hpnicfIssuTestDeviceSlotID OBJECT-TYPE
    SYNTAX Integer32 (0..255)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Slot ID of the card."
    ::= { hpnicfIssuTestResultEntry 3 }


hpnicfIssuTestDeviceCpuID OBJECT-TYPE
    SYNTAX Integer32 (0..7)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "CPU ID of the card."
    ::= { hpnicfIssuTestResultEntry 4 }


hpnicfIssuTestDeviceUpgradeWay OBJECT-TYPE
    SYNTAX INTEGER
        {
        none(1),
        reboot(2),
        sequenceReboot(3),
        issuReboot(4),
        serviceUpgrade(5),
        fileUpgrade(6),
        incompatibleUpgrade(7)
        }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Upgrade method of the device.
        none                   - No operation was performed.
        reboot                 - The upgrade method of this device is Reboot.
        sequenceReboot         - The upgrade method of this device is SequenceReboot.
        issuReboot             - The upgrade method of this device is IssuReboot.
        serviceUpgrade         - The upgrade method of this device is ServiceReboot.
        fileUpgrade            - The upgrade method of this device is FileReboot.
        incompatibleUpgrade    - The upgrade method of this device is IncompatibleUpgrade.
        "
    DEFVAL { none }
    ::= { hpnicfIssuTestResultEntry 5 }


hpnicfIssuUpgradeResultTable OBJECT-TYPE
    SYNTAX SEQUENCE OF HpnicfIssuUpgradeResultEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Shows the result of the install operation."
    ::= { hpnicfIssuUpgradeResultGroup 3 }


hpnicfIssuUpgradeResultEntry OBJECT-TYPE
    SYNTAX HpnicfIssuUpgradeResultEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "An hpnicfIssuUpgradeResultEntry entry.  Each entry provides the
        upgrade result of a card in the device."
    INDEX { hpnicfIssuUpgradeResultIndex }
    ::= { hpnicfIssuUpgradeResultTable 1 }


HpnicfIssuUpgradeResultEntry ::=
    SEQUENCE {
        hpnicfIssuUpgradeResultIndex
            Integer32,
        hpnicfIssuUpgradeDeviceChassisID
            Integer32,
        hpnicfIssuUpgradeDeviceSlotID
            Integer32,
        hpnicfIssuUpgradeDeviceCpuID
            Integer32,
        hpnicfIssuUpgradeState
            INTEGER,
        hpnicfIssuDeviceUpgradeWay
            INTEGER,
        hpnicfIssuUpgradeDeviceStatus
            INTEGER,
        hpnicfIssuUpgradeFailedReason
            DisplayString
     }

hpnicfIssuUpgradeResultIndex OBJECT-TYPE
    SYNTAX Integer32 (1..65535)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Internal Index, not accessible."
    ::= { hpnicfIssuUpgradeResultEntry 1 }


hpnicfIssuUpgradeDeviceChassisID OBJECT-TYPE
    SYNTAX Integer32 (0..255)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Chassis ID of the card."
    ::= { hpnicfIssuUpgradeResultEntry 2 }


hpnicfIssuUpgradeDeviceSlotID OBJECT-TYPE
    SYNTAX Integer32 (0..255)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Slot ID of the card."
    ::= { hpnicfIssuUpgradeResultEntry 3 }


hpnicfIssuUpgradeDeviceCpuID OBJECT-TYPE
    SYNTAX Integer32 (0..7)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "CPU ID of the card."
    ::= { hpnicfIssuUpgradeResultEntry 4 }


hpnicfIssuUpgradeState OBJECT-TYPE
    SYNTAX INTEGER
        {
        init(1),
        loading(2),
        loaded(3),
        switching(4),
        switchover(5),
        committing(6),
        committed(7),
        rollbacking(8),
        rollbacked(9)
        }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Upgrade status of the device.
        init           -The current status of the device is Init.
        loading        -The current status of the device is Loading.
        loaded         -The current status of the device is Loaded.
        switching      -The current status of the device is Switching.
        switchover     -The current status of the device is Switchover.
        committing     -The current status of the device is Committing.
        committed      -The current status of the device is Committed.
        rollbacking    -The current status of the device is Rollbacking.
        rollbacked     -The current status of the device is Rollbacked.
        "
    ::= { hpnicfIssuUpgradeResultEntry 5 }


hpnicfIssuDeviceUpgradeWay OBJECT-TYPE
    SYNTAX INTEGER
        {
        none(1),
        reboot(2),
        sequenceReboot(3),
        issuReboot(4),
        serviceUpgrade(5),
        fileUpgrade(6),
        incompatibleUpgrade(7)
        }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Upgrade method of the card.
        none                   - No operation was performed.
        reboot                 - The upgrade method of this device is Reboot.
        sequenceReboot         - The upgrade method of this device is SequenceReboot.
        issuReboot             - The upgrade method of this device is IssuReboot.
        serviceUpgrade         - The upgrade method of this device is ServiceReboot.
        fileUpgrade            - The upgrade method of this device is FileReboot.
        incompatibleUpgrade    - The upgrade method of this device is IncompatibleUpgrade.
        "
    ::= { hpnicfIssuUpgradeResultEntry 6 }


hpnicfIssuUpgradeDeviceStatus OBJECT-TYPE
    SYNTAX INTEGER
        {
        waitingUpgrade(1),
        inProcess(2),
        success(3),
        failure(4)
        }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Upgrade status of the device."
    ::= { hpnicfIssuUpgradeResultEntry 7 }


hpnicfIssuUpgradeFailedReason OBJECT-TYPE
    SYNTAX DisplayString (SIZE (0..255))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Indicates the cause of 'failure' state
        of the object 'hpnicfIssuUpgradeDeviceStatus'.
        This object would be a null string if the value of
        'hpnicfIssuCompatibleResultStatus' is not 'failure'."
    ::= { hpnicfIssuUpgradeResultEntry 8 }


hpnicfIssuUpgradeNotify OBJECT IDENTIFIER ::= { hpnicfIssuUpgrade 2 }


hpnicfIssuUpgradeTrapPrefix OBJECT IDENTIFIER ::= { hpnicfIssuUpgradeNotify 0 }


hpnicfIssuUpgradeOpCompletionNotify NOTIFICATION-TYPE
    OBJECTS { hpnicfIssuOpType, hpnicfIssuOpStatus, hpnicfIssuFailedReason, hpnicfIssuOpTimeCompleted }
    STATUS current
    DESCRIPTION
        "An hpnicfIssuUpgradeOpCompletionNotify is sent at the
        completion of upgrade operation denoted by
        hpnicfIssuOp object, if such a notification
        was requested when the operation was initiated.
        hpnicfIssuOpType indicates the type of the
        operation.  hpnicfIssuOpStatus indicates the
        result of the operation.  hpnicfIssuFailedReason
        indicates the operation failure reason.
        hpnicfIssuOpTimeCompleted indicates the time
        when the operation was completed."
    ::= { hpnicfIssuUpgradeTrapPrefix 1 }



END