-- ============================================================================ -- Copyright (c) 2010-2013 Hewlett-Packard Development Company, L.P. -- -- Description: Flowtemplate Management Information Base. -- Reference: -- Version: 1.0 -- History: -- V1.0 created by tangshun. -- ============================================================================ HPN-ICF-FLOWTEMPLATE-MIB DEFINITIONS ::= BEGIN IMPORTS hpnicfCommon FROM HPN-ICF-OID-MIB ifIndex FROM RFC1213-MIB Integer32, OBJECT-TYPE, MODULE-IDENTITY FROM SNMPv2-SMI RowStatus, MacAddress FROM SNMPv2-TC; -- -- Nodes definitions -- hpnicfFlowTemplate MODULE-IDENTITY LAST-UPDATED "200511241320Z" -- Nov 24, 2005 at 13:20 GMT ORGANIZATION "" CONTACT-INFO "" DESCRIPTION "Flow template management information base." ::= { hpnicfCommon 64 } hpnicfFlowTemplateMibObject OBJECT IDENTIFIER ::= { hpnicfFlowTemplate 1 } hpnicfFTConfigGroup OBJECT IDENTIFIER ::= { hpnicfFlowTemplateMibObject 1 } hpnicfFTGroupNextIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains an appropriate value to be used for hpnicfFTGroupIndex when creating rows in the hpnicfFTGroupTable. If it is 2147483647, it denotes that hpnicfFTGroupTable can't create any instance. " ::= { hpnicfFTConfigGroup 1 } hpnicfFTGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfFTGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of flow template group. A flow template group, which is applied to interface, must use hpnicfFTGroupTable to create a instance and hpnicfFTBasicGroupTable or hpnicfFTExtendGroupTable to configure flow template's need item. A basic flow template must use hpnicfFTBasicGroupTable to configure some basic flow template's need item, such as: address, protocol, priority. A extend flow template must use hpnicfFTExtendGroupTable to configure packet's type and offset and length. " ::= { hpnicfFTConfigGroup 2 } hpnicfFTGroupEntry OBJECT-TYPE SYNTAX HpnicfFTGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Flow template group information." INDEX { hpnicfFTGroupIndex } ::= { hpnicfFTGroupTable 1 } HpnicfFTGroupEntry ::= SEQUENCE { hpnicfFTGroupIndex Integer32, hpnicfFTGroupName OCTET STRING, hpnicfFTGroupType INTEGER, hpnicfFTGroupRowStatus RowStatus } hpnicfFTGroupIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Flow template group index." ::= { hpnicfFTGroupEntry 1 } hpnicfFTGroupName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..31)) MAX-ACCESS read-create STATUS current DESCRIPTION "Flow template group name." ::= { hpnicfFTGroupEntry 2 } hpnicfFTGroupType OBJECT-TYPE SYNTAX INTEGER { basic(1), extend(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Type of flow template." ::= { hpnicfFTGroupEntry 3 } hpnicfFTGroupRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus." ::= { hpnicfFTGroupEntry 4 } -- --nodes of hpnicfFTBasicGroupTable -- hpnicfFTBasicGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfFTBasicGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of basic flow template group." ::= { hpnicfFTConfigGroup 3 } hpnicfFTBasicGroupEntry OBJECT-TYPE SYNTAX HpnicfFTBasicGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Basic flow template group information." INDEX { hpnicfFTGroupIndex } ::= { hpnicfFTBasicGroupTable 1 } HpnicfFTBasicGroupEntry ::= SEQUENCE { hpnicfFTBasicGroupAddressType BITS, hpnicfFTBasicGroupPriorityType BITS, hpnicfFTBasicGroupProtocolType BITS, hpnicfFTBasicGroupSMacWildCard MacAddress, hpnicfFTBasicGroupDMacWildCard MacAddress, hpnicfFTBasicGroupRowStatus RowStatus } hpnicfFTBasicGroupAddressType OBJECT-TYPE SYNTAX BITS { sourceIpv4Address(0), destIPv4Address(1), sourceIPv6Address(2), destIPv6Address(3), sourceMacAddress(4), destMacAddress(5) } MAX-ACCESS read-create STATUS current DESCRIPTION "Type of MAC and IP address. This is a bit-map of possible conditions. The various bit positions are: sourceIpv4Address source IPv4's address destIPv4Address destination IPv4's address sourceIPv6Address source IPv6 address destIPv6Address destination IPv6 address sourceMacAddress source MAC address destMacAddress destination MAC address " ::= { hpnicfFTBasicGroupEntry 1 } hpnicfFTBasicGroupPriorityType OBJECT-TYPE SYNTAX BITS { vlanID(0), cos(1), topVlanID(2), topCos(3), fragment(4), tcpFlag(5), tos(6), dscp(7), ipprecedence(8) } MAX-ACCESS read-create STATUS current DESCRIPTION "Type of priority. This is a bit-map of possible conditions. The various bit positions are: vlanID VlanID cos 802.1p priority topVlanID VlanID of top layer topCos 802.1p priority of top layer fragment fragment tcpFlag TCP flag tos type of service dscp DSCP ipprecedence IP precedence " ::= { hpnicfFTBasicGroupEntry 2 } hpnicfFTBasicGroupProtocolType OBJECT-TYPE SYNTAX BITS { l2Potocol(0), ipv4L3Protocol(1), ipv6L3Protocol(2), icmpProtocolType(3), icmpProtocolCode(4), icmpv6ProtocolType(5), icmpv6ProtocolCode(6), sourceL4Port(7), destL4Port(8) } MAX-ACCESS read-create STATUS current DESCRIPTION "Type of protocol. This is a bit-map of possible conditions. The various bit positions are: l2Potocol layer 2 protocol ipv4L3Protocol layer 3 protocol of IPv4 ipv6L3Protocol layer 3 protocol of IPv6 icmpProtocolType Type of ICMP protocol of IPv4 icmpProtocolCode Code of ICMP protocol of IPv4 icmpv6ProtocolType Type of ICMP protocol of IPv6 icmpv6ProtocolCode Code of ICMP protocol of IPv6 sourceL4Port port of layer 4 of source destL4Port port of layer 4 of destination " ::= { hpnicfFTBasicGroupEntry 3 } hpnicfFTBasicGroupSMacWildCard OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Source MAC address field in Ethernet packet head." ::= { hpnicfFTBasicGroupEntry 4 } hpnicfFTBasicGroupDMacWildCard OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Destination MAC address field in Ethernet packet head." ::= { hpnicfFTBasicGroupEntry 5 } hpnicfFTBasicGroupRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus." ::= { hpnicfFTBasicGroupEntry 6 } -- --nodes of hpnicfFTExtendGroupTable -- hpnicfFTExtendGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfFTExtendGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of extend flow template group information." ::= { hpnicfFTConfigGroup 4 } hpnicfFTExtendGroupEntry OBJECT-TYPE SYNTAX HpnicfFTExtendGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Extend flow template group information entry." INDEX { hpnicfFTGroupIndex, hpnicfFTExtendGroupOffsetType } ::= { hpnicfFTExtendGroupTable 1 } HpnicfFTExtendGroupEntry ::= SEQUENCE { hpnicfFTExtendGroupOffsetType INTEGER, hpnicfFTExtendGroupOffsetMaxValue Integer32, hpnicfFTExtendGroupLengthMaxValue Integer32, hpnicfFTExtendGroupRowStatus RowStatus } hpnicfFTExtendGroupOffsetType OBJECT-TYPE SYNTAX INTEGER { start(1), mpls(2), l2(3), l4(4), l5(5), ipv4(6), ipv6(7) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Offset type of the packet. start Offset from the start of the packet mpls Offset from the head of MPLS l2 Offset from the head of the L2 frame l4 Offset from the head of L4 packet l5 Offset from the head of the L5 packet ipv4 Offset from the head of the IPv4 packet ipv6 Offset from the head of the IPv6 packet " ::= { hpnicfFTExtendGroupEntry 1 } hpnicfFTExtendGroupOffsetMaxValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The max value of offset." ::= { hpnicfFTExtendGroupEntry 2 } hpnicfFTExtendGroupLengthMaxValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The max value of length." ::= { hpnicfFTExtendGroupEntry 3 } hpnicfFTExtendGroupRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus." ::= { hpnicfFTExtendGroupEntry 4 } -- --nodes of hpnicfFTApplyGroup -- hpnicfFTApplyGroup OBJECT IDENTIFIER ::= { hpnicfFlowTemplateMibObject 2 } hpnicfFTIfApplyTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfFTIfApplyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of any interface with flowtemplate. A flow template, which will be applied interface, is an instance at hpnicfFTGroupTable and hpnicfFTBasicGroupTable or hpnicfFTExtendGroupTable. A basic flow template is an instance at hpnicfFTGroupTable and hpnicfFTBasicGroupTable, and the instance's RowStatus must be 'active' at each table. A extend flow template is an instance at hpnicfFTGroupTable and hpnicfFTExtendGroupTable, and the instance's RowStatus must be 'active' at each table. " ::= { hpnicfFTApplyGroup 1 } hpnicfFTIfApplyEntry OBJECT-TYPE SYNTAX HpnicfFTIfApplyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Any interface with flowtemplate information." INDEX { ifIndex, hpnicfFTGroupIndex } ::= { hpnicfFTIfApplyTable 1 } HpnicfFTIfApplyEntry ::= SEQUENCE { hpnicfFTIfApplyGroupName OCTET STRING, hpnicfFTIfApplyRowStatus RowStatus } hpnicfFTIfApplyGroupName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The name of flow template." ::= { hpnicfFTIfApplyEntry 1 } hpnicfFTIfApplyRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus." ::= { hpnicfFTIfApplyEntry 2 } END